The issue was made visible with .NET Core WinForms. Some controls draw text with DrawTextEx to intermediate Graphics based on Bitmap, that later it's moved back to main Graphics with DrawImage. This results in a lost of transparency component along the way, making antialiased glyph bitmaps draw and B/W. Corruption is visible with gray antialiasing, but is more severe in subpixel modes.
I verified that same happens with gdiplus on Windows, code from CoreFX works correctly.
It was set by xamarin-macios when they were still taking the raw .cs source files
but since we switched to prebuilt binaries we need to replace it with
some define we're actually setting in Mono.
Most cases can be replaced by just XAMMAC_4_5 since MOBILE is defined on the xammac profile.
* Move drawing types for XI/XM/wasm/orbis/unreal to System.Drawing.Common
For XI/XM they were in Xamarin.iOS.dll/OpenTK-1.0.dll before.
For wasm/orbis/unreal we remove System.Drawing.dll from the profiles and
add the types to System.Drawing.Common.dll instead to align with the other
mobile profiles (only "net_4_x" and "build" still have System.Drawing.dll).
* Bump API snapshot submodule
* [csproj] Update project files
This PR adds missing System.Drawing converters thus it completes NS2.1 support (as of today) for all profiles except macOS\IOS specific ones: monotouch, tv, watch, xammac, xammac_net_4_5.
They can be used with native line endings.
We now have a shared folder with the dotnet repos and they have CRLF normalization enabled.
This difference leads to conflicts while applying changes from the dotnet repos to mono.
ystem.Exception: Generic Error [GDI+ status: GenericError]
at System.Drawing.GDIPlus.CheckStatus (System.Drawing.Status status) [0x00079] in <bb99ab19679c4cf79f4136bd0faf8b5e>:0
at System.Drawing.Graphics.FillRectangle (System.Drawing.Brush brush, System.Int32 x, System.Int32 y, System.Int32 width, System.Int32 height) [0x00025] in <bb99ab19679c4cf79f4136bd0faf8b5e>:0
at System.Drawing.Graphics.FillRectangle (System.Drawing.Brush brush, System.Drawing.Rectangle rect) [0x0002c] in <bb99ab19679c4cf79f4136bd0faf8b5e>:0
at (wrapper remoting-invoke-with-check) System.Drawing.Graphics.FillRectangle(System.Drawing.Brush,System.Drawing.Rectangle)
at System.Windows.Forms.Control.PaintControlBackground (System.Windows.Forms.PaintEventArgs pevent) [0x002ff] in <69ecb40f27a1431a99620933ba9a8b39>:0
at System.Windows.Forms.Control.OnPaintBackground (System.Windows.Forms.PaintEventArgs pevent) [0x00000] in <69ecb40f27a1431a99620933ba9a8b39>:0
at System.Windows.Forms.Control.WmPaint (System.Windows.Forms.Message& m) [0x0005f] in <69ecb40f27a1431a99620933ba9a8b39>:0
at System.Windows.Forms.Control.WndProc (System.Windows.Forms.Message& m) [0x001a4] in <69ecb40f27a1431a99620933ba9a8b39>:0
at System.Windows.Forms.ScrollBar.WndProc (System.Windows.Forms.Message& m) [0x00000] in <69ecb40f27a1431a99620933ba9a8b39>:0
at System.Windows.Forms.Control+ControlWindowTarget.OnMessage (System.Windows.Forms.Message& m) [0x00000] in <69ecb40f27a1431a99620933ba9a8b39>:0
at System.Windows.Forms.Control+ControlNativeWindow.WndProc (System.Windows.Forms.Message& m) [0x0000b] in <69ecb40f27a1431a99620933ba9a8b39>:0
at System.Windows.Forms.NativeWindow.WndProc (System.IntPtr hWnd, System.Windows.Forms.Msg msg, System.IntPtr wParam, System.IntPtr lParam) [0x00085] in <69ecb40f27a1431a99620933ba9a8b39>:0
This reverts commit e15b8c53ff.
It broke other builds.
Revert "[bench] Revert hardcoding of microbenchmarks to run-jenkins (#11787)"
This reverts commit 7a81ac67a2.
## Problem
Even after #10942, menus and toolstrips still look awful with a dark theme:

## Previous attempt
#10942 was a first stab in the dark at what was going on here, before I managed to get mono to compile for testing. I was hopeful that it would address this, but the problem was different.
## Another red herring
Later I thought the problem might be that `SystemColors.ButtonFace.IsSystemColor` was `false`. It looked like this might have caused the runtime to interpret `ButtonFace`'s special 168 value as an RGB code instead of a system color marker.
This fix had no effect (see below for true cause), but I'll include it anyway; the lower bound of the upper system colors block needs to decrease from 170 to 168 to allow `ButtonFace` and `ButtonHighlight` to be considered system colors:
https://github.com/mono/mono/blob/44db64c620c2c957a49b3f5a69cb09c19c1c8c1a/mcs/class/System.Drawing/System.Drawing/KnownColor.cs#L200-L203
## Actual cause
The toolstrip color comes from `ProfessionalColorTable.ToolStripGradientBegin` and `ProfessionalColorTable.ToolStripGradientEnd`. The latter color is hard coded to a light shade, but the former defaults to `SystemColors.ButtonFace`.
These are the colors that are loaded from the GTK system theme:
https://github.com/mono/mono/blob/b104565ccfde477fc7b6308f2d3e4efff0af5848/mcs/class/System.Windows.Forms/System.Windows.Forms/X11DesktopColors.cs#L111-L116
Note that `ButtonFace` is not among them. This means that it uses a compile time default, and is not a good choice for the background of a control. `ToolStrip` is using it anyway, but other controls use `SystemColors.Control` instead.
## Changes
There are two obvious ways to fix this:
1. Use `SystemColors.Control` instead of `SystemColors.ButtonFace` in `ProfessionalColorTable`
2. Load `SystemColors.ButtonFace` from the system theme
This pull request does both. In addition, it also sets the other end of the toolstrip gradients to `SystemColors.ControlLight` instead of a hard coded value. The choice of `ControlLight` was made because in those cases where alternate hard coded values were available for both sides of the gradient, the "other" side was consistently lighter. Now it looks better:

1) We try to include every source in .sources but that doesn't work
for generic _test.sources since we'd need to prepend the Test/ path.
2) MonoNativeConfig.cs.in was removed in 273f120c52
* [sdks] Build BCL profiles without configure flags
* [sdks] Add BclTemplate to build BCL profiles
This is to avoid building all the profiles in a single `sdks/out/bcl` directory which will be shared between android, ios and wasm.
* [sdks] Simplify call to BclTemplate
* [mcs] Make directory dependency as order-only
We would otherwise always rebuild the target since the directory is updated whenever something is added to the directory. This is a common Makefile technique.
* [sdks] Build tests for BCL targets
* Remove use of sln dependencies and use csproj project references instead
* Rewrite jay.vcxproj so it builds correctly even without help from the sln file
* Force pre-build event to run after references are resolved. Change how culevel.exe path is computed to be more resilient.
* [csproj] Update project files
A recent commit revealed that in cases where we select based on a mix of host platform and profile, genproj csproj files can end up with duplicate sources because the existing <ItemGroup Condition= approach could make multiple groups match for a given compile when we really just want one.
This PR changes to generating a cascade of msbuild <Choose> elements, which give if-else selection to ensure that we only ever build a single set of files.
Using solution dependencies in ```bcl.sln``` seems flaky and seems like it might not establish the full ordering we need to ensure that ```Consts.cs``` exists before we build things that require it. Let's try using project references (where ```corlib.dll``` 'depends' on ```genconsts.exe```) instead. This should also insert the dependency for any project that includes Consts.cs instead of just corlib.
This PR also makes update-solution-files actually fail if ```genconsts.exe``` fails to build because it was driving me mad.
Part of #6886
Carbon implementation now throws exception instead of crashing in the mismatched p/invoke calls.
Cocoa implementation now support 64-bit mode and uses the handle of `NSView` that is passed in instead of relying on `NSGraphicsContext.CurrentContext`. It also fixes handling of flipped views.
Requires up to date libgdiplus.
* Update genproj makefile to include gensources
Update genproj argument parser to be more generous about displaying help
* Checkpoint
* Checkpoint
* Checkpoint
* Checkpoint
* Checkpoint
* Checkpoint
* Checkpoint
* Checkpoint
* Fix rebase issue
* Checkpoint
* Checkpoint
* Fix built sources only being added to one profile
* Fix typo
* Checkpoint
* Fix indentation
* Use csc instead of mcs
* Checkpoint
* Fix BUILT_SOURCES only being handled for the first profile processed
* Checkpoint
* Checkpoint
* Strip double slashes from paths to fix spurious csproj change
* Checkpoint
* Checkpoint
* Checkpoint
* Checkpoint: Fix genproj compilation
* Checkpoint
* Checkpoint
* Checkpoint
* Fix crash when no targets were loaded (due to an error)
* Checkpoint
* Checkpoint
* Checkpoint
* Fix TryParseTargetInto bug
* Checkpoint
* Shuffle exclude logic around so that it works correctly during genproj diffing
* Remove gensources tracing
* Checkpoint
* Fix handling of oddball sources paths from executable.make
* Fix jay not being set to build
* Fix wrong slashes being used for embedded resource paths
* [csproj] Update project files