* System.Data.SqlClient/SqlConnection.cs:
* System.Data.SqlClient/SqlDataReader.cs:
Close the data reader properly, and be sure
to close the data reader when the connection
is closed.
svn path=/trunk/mcs/; revision=11492
* Mono.Data.Tds/Mono.Data.Tds.Protocol/Tds.cs:
(Disconnect): close the stream and set connected to false.
(NextResult): check if after DoneProc we have a ColumnMetadata + Row,
which holds the values for the output parameters and read them.
(LoadRow): add the values to outputParameters if DoneProc.
When executing a stored procedure, we execute the procedure and then
select the parameter values.
* Mono.Data.Tds/Mono.Data.Tds.Protocol/Tds70.cs:
(BuildParameters): check Parameters.
* Mono.Data.Tds/Mono.Data.Tds.Protocol/TdsComm.cs: added Close () to
close the stream.
* Mono.Data.Tds/Mono.Data.Tds.Protocol/TdsConnectionParameters.cs:
initialize all the string to be empty.
* System.Data/System.Data.SqlClient/SqlCommand.cs:
(CloseReader): don't get the output parameters here.
(GetOutputParameters): don't skip the stream. The parameters will be
there.
* System.Data/System.Data.SqlClient/SqlConnection.cs: don't try to
execute 'sp_reset_connection'.
* System.Data/System.Data.SqlClient/SqlDataReader.cs: get the output
parameters after the end of the results.
svn path=/trunk/mcs/; revision=9534
* System.Data.SqlClient/SqlCommand.cs:
* System.Data.SqlClient/SqlConnection.cs:
* System.Data.SqlClient/SqlDataReader.cs:
* System.Data.SqlClient/SqlParameter.cs:
* System.Data.SqlClient/SqlParameterCollection.cs:
* System.Data.SqlClient/SqlTransaction.cs:
Many changes around restructuring of parameter
information so that the Sybase provider supports
PREPAREs too.
svn path=/trunk/mcs/; revision=9193
* System.Data.SqlClient/SqlConnection.cs:
BeginTransaction bug.
* System.Data.SqlClient/SqlParameter.cs:
Add some comments to describe what is going on.
svn path=/trunk/mcs/; revision=9067
* System.Data.SqlClient/SqlCommand.cs:
Add a TODO.
* System.Data.SqlClient/SqlDataReader.cs:
Add support to get SQL Types
* System.Data.SqlClient/SqlParameter.cs:
Add some comments to describe what is going on.
svn path=/trunk/mcs/; revision=9064
* System.Data.Common/DbDataPermission.cs:
* System.Data.SqlClient/SqlClientPermission.cs:
Make these agree on the class status page.
* System.Data.SqlClient/SqlCommand.cs:
- Fix up handling of GUID and [Var]Binary, and Image types
* System.Data.SqlClient/SqlParameter.cs:
- Provide support for conversion between Type,
DbType, SqlDbType, and the SQL server type names.
- Fix up handling of GUID and [Var]Binary types
* System.Data.SqlClient/SqlParameterCollection.cs:
Correct all of the Add methods.
* Test/SqlTest.cs:
- Add more types to test: unique identifier, binary,
image, smalldatetime, money, smallmoney, timestamp
svn path=/trunk/mcs/; revision=9003
* Test/SqlTest.cs:
- Add more types to test: unique identifier, binary
types.
* System.Data.SqlClient/SqlParameter.cs:
- Provide support for conversion between Type,
DbType, SqlDbType, and the SQL server type names.
- Fix up handling of GUID and [Var]Binary types
* System.Data.SqlClient/SqlCommand.cs:
- Fix up handling of GUID and [Var]Binary types
svn path=/trunk/mcs/; revision=8992
* System.Data.SqlClient/SqlCommand.cs:
Slight reformatting of Bit values and sql statements
* System.Data.SqlClient/SqlDataReader.cs:
Implement RecordsAffected
Complete SchemaTable
* System.Data.SqlClient/SqlParameter.cs:
Propertly support Char/NChar
* System.Data.SqlClient/SqlXmlTextReader.cs:
Add Close () to the Dispose () method
svn path=/trunk/mcs/; revision=8986
* Test/SqlTest.cs:
New class added for testing SqlClient
* System.Data.SqlClient/SqlCommand.cs:
Add handling for SqlDbType.Bit
* System.Data.SqlClient/SqlConnection.cs:
Implement Dispose () methods.
Change ConnectionString setter
* System.Data.SqlClient/SqlDataReader.cs:
Implement Dispose () methods.
Set RecordsAffected to -1 by default. Need to
set this correctly in the future.
* System.Data.SqlClient/SqlCommandBuilder.cs:
* System.Data.SqlClient/SqlDataAdapter.cs:
* System.Data.SqlClient/SqlTransaction.cs:
* System.Data.SqlClient/SqlXmlTextReader.cs:
Implement Dispose () methods.
svn path=/trunk/mcs/; revision=8975
* list:
Add new internal tds classes
* System.Data.Common/DbDataAdapter.cs:
* System.Data.SqlClient/SqlDataAdapter.cs:
Change event calling system
* System.Data.SqlClient/SqlClientPermission.cs:
* System.Data.SqlClient/SqlClientPermissionAttribute.cs:
* System.Data.SqlClient/SqlDataReader.cs:
Add comments
* System.Data.SqlClient/SqlCommand.cs:
Some changes to make consistent with .NET based on Sql server traces
Implement command timeout
* System.Data.SqlClient/SqlCommandBuilder.cs:
Make sure that we only build a command if key info found
* System.Data.SqlClient/SqlConnection.cs:
Change event calling system
Some changes to make consistent with .NET based on Sql server traces
Implement connection timeout
* System.Data.SqlClient/SqlConnectionPool.cs:
Implement connection timeout
* System.Data.SqlClient/SqlError.cs:
Implement ToString ()
* System.Data.SqlClient/SqlException.cs:
Mucho implementation and cleanup
* System.Data.SqlClient/SqlParameter.cs:
Implement Clone ()
* System.Data.SqlClient/SqlParameterCollection.cs:
Code cleanup
* System.Data.SqlClient/SqlTransaction.cs:
Move some of the transaction creation to SqlConnection to be consistent
with .NET SQL traces
svn path=/trunk/mcs/; revision=8906
* System.Data/DataRow.cs:
* System.Data/DataTable.cs:
Some fix-ups related to the DbDataAdapter to make it work.
* System.Data.Common/DbDataAdapter.cs:
Fix the Fill () and Update () methods. These now work
fairly well. Need mucho testing.
* System.Data.SqlClient/SqlCommandBuilder.cs:
Support table mappings and parameter source versions now.
* System.Data.SqlClient/SqlConnection.cs:
* System.Data.SqlClient/SqlTransaction.cs:
Add set accessor for transaction so that SqlTransaction.Commit ()
will remove itself from the connection.
* System.Data.SqlClient/SqlDataAdapter.cs:
Update/Insert/Delete command should be null by default.
* System.Data.SqlClient/SqlException.cs:
Remove a TODO attribute
* System.Data.SqlClient/SqlRowUpdatingEventArgs.cs:
Properly handle the SqlCommand object
svn path=/trunk/mcs/; revision=8889
* System.Data.Common/DbDataAdapter.cs:
Remove NotImplementedException in Dispose
* System.Data.Common/FieldNameLookup.cs:
Should be sealed
* System.Data.SqlClient/SqlCommand.cs:
Fix CommandText accessor (stack overflow)
Implement DeriveParameters method
* System.Data.SqlClient/SqlCommandBuilder.cs:
Implement this class
* System.Data.SqlClient/SqlConnection.cs:
Change application name to "Mono SqlClient Data Provider"
* System.Data.SqlClient/SqlDataReader.cs:
Add new schema information
* System.Data.SqlClient/SqlError.cs:
* System.Data.SqlClient/SqlErrorCollection.cs:
Remove internal methods, TODO attributes
* System.Data.SqlClient/SqlParameter.cs:
Add new internal constructor for DeriveParameters use
* System.Data.SqlClient/SqlParameterConverter.cs:
Add missing methods based on class status
svn path=/trunk/mcs/; revision=8864
* System.Data.SqlClient/SqlCommand.cs:
Use SET NO_BROWSETABLE ON when CommandBehavior is KeyInfo
* System.Data.SqlClient/SqlDataReader.cs:
Get more schema info if available
* list:
Add Mono.Data.TdsClient.Internal.TdsColumnStatus
svn path=/trunk/mcs/; revision=8791
* System.Data.SqlClient/SqlCommand.cs:
Change to use sp_executesql to run regular text queries.
Now, sp_executesql for text, sp_execute for prepared,
and execute for SPs means everything runs a procedure.
* System.Data.SqlClient/SqlParameter.cs:
Allow client to set parameter name in Prepare ()
* System.Data.SqlClient/SqlParameterCollection.cs:
Implement some methods
* System.Data.SqlClient/SqlDataReader.cs:
Since everything is an SP now, we know that when
we see DoneProc, that we are really done.
svn path=/trunk/mcs/; revision=8749
* System.Data.Common/DbEnumerator.cs :
Throw correct exception on Reset ()
Add ColumnSize to schema table.
* System.Data.SqlClient/SqlDataReader.cs :
Add ColumnSize to schema table.
* System.Data.SqlClient/SqlCommand.cs :
Change the way that preparing is handled.
Now uses sp_prepare on the server instead of temp
stored procedures because it's the Right Thing[tm] to do.
* System.Data.SqlClient/SqlConnection.cs :
Store data readers here rather than in command
* System.Data.SqlClient/SqlDataReader.cs :
More implementation, including binary types
* System.Data.SqlClient/SqlParameter.cs :
Lowercase type name
svn path=/trunk/mcs/; revision=8746
* System.Data.Common/DbDataAdapter.cs :
Fix handling of nulls
* System.Data.Common/DbDataRecord.cs :
Change GetFieldType ()
* System.Data.Common/DbEnumerator.cs :
Add new schema information
* System.Data.Common/FieldNameLookup.cs :
Change definition of schema
* System.Data.Common/SchemaInfo.cs :
Add more information
* System.Data.SqlClient/SqlDataReader.cs :
get more schema table data
* list :
Add Mono.Data.TdsClient.Internal.TdsSchemaInfo
svn path=/trunk/mcs/; revision=8722
* System.Data.Common/FieldNameLookup.cs:
* System.Data.Common/SchemaInfo.cs:
* System.Data.SqlClient/SqlXmlTextReader.cs:
New classes added
* list :
Class list changed in build
* System.Data.SqlClient/SqlCommand.cs:
Added support for command behaviors
Refactored a bunch of code
Implement ExecuteScalar
Implement ExecuteXmlReader
* System.Data.SqlClient/SqlConnection.cs:
Moved CheckForErrors here
* System.Data.SqlClient/SqlDataAdapter.cs:
Code reformatting
* System.Data.SqlClient/SqlDataReader.cs:
Implement GetEnumerator
Fix NextResult, Read
Add SqlDataReaderEnumerator private class
* System.Data.SqlClient/SqlParameter.cs:
Move some of the Prepare code from SqlCommand to here
* System.Data.SqlClient/SqlTransaction.cs:
Move error checking to SqlConnection
svn path=/trunk/mcs/; revision=8703
* System.Data.SqlClient/SqlCommand.cs:
Added code to handle parameters for queries
* System.Data.SqlClient/SqlConnection.cs:
Properly handle resetting SqlConnections
* System.Data.SqlClient/SqlDataReader.cs:
Properly handle the case where no results are returned
* System.Data.SqlClient/SqlParameter.cs:
Default direction to Input
* System.Data.SqlClient/SqlParameterCollection.cs:
Implement GetEnumerator
svn path=/trunk/mcs/; revision=8670
* System.Data.SqlClient/SqlConnectionPool.cs:
New class added
* System.Data.SqlClient/SqlClientPermission.cs:
* System.Data.SqlClient/SqlClientPermissionAttribute.cs:
* System.Data.SqlClient/SqlInfoMessageEventArgs.cs:
* System.Data.SqlClient/SqlInfoMessageEventHandler.cs:
* System.Data.SqlClient/SqlParameter.cs:
* System.Data.SqlClient/SqlParameterCollection.cs:
Code reformatting
* System.Data.SqlClient/SqlCommand.cs:
* System.Data.SqlClient/SqlConnection.cs:
* System.Data.SqlClient/SqlException.cs:
* System.Data.SqlClient/SqlTransaction.cs:
New code based on work in TDS Client
* list:
New files added for SqlClient, and TdsClient.Internal
* System.Data.build:
Added reference to System.EnterpriseServices.dll
Still leave SqlClient out of build until danmorg
can fix.
svn path=/trunk/mcs/; revision=8552
* System.Data/DataRow.cs: don't throw exception
if DBNull is false. Had to do comment this line
to allow a typeof(Type).
* System.Data.SqlClient/SqlCommand.cs: the "DataType"
DataColumn and DataRows in a DataTable for a schema should
be typeof Type, not string. This is to make it
compatible with MS.NET
* System.Data.SqlClient/SqlConnection.cs: the
isolation level should be set before
beginning the transaction
* Test/SqlSharpCli.cs: change string to Type for
"DataType" from a DataRow in a DataTable
that contains a schema.
svn path=/trunk/mcs/; revision=8229
* System.Data.SqlClient/SqlParameter.cs: flush
* System.Data.SqlClient/SqlParameterCollection.cs: fixes
for the Item property, IndexOf, and Contains.
* Test/SqlSharpCli.cs: added input parameters support.
when a query is executed, if a parameter name matches
a SQL# internal variable name, it uses that value for the parameter; otherwise,
the user is prompted for the parameter value. Currently, it only supports
string parameters.
svn path=/trunk/mcs/; revision=6883
* System.Data.SqlClient/SqlConnection.cs: modifed -
start to implement the interfaces properly and
properly doing a Close(), Dispose(), and
releasing resources
* Test/SqlSharpCli.cs: modified -
add support for MySQL in Mono.Data.MySql
and OleDb support in System.Data.OleDb. However,
the OleDb support is commented right now.
When the program starts up, a shorter help menu should
display the most important commands: help and quit
svn path=/trunk/mcs/; revision=5023
* System.Data.SqlClient/SqlCommand.cs: typo
should be CommandBehavior.KeyInfo
* Test/SqlSharpCli.cs: refactored and added a few more
features.
svn path=/trunk/mcs/; revision=4961
* System.Data/DataRow.cs: modified
support setting of DBNull.Value
using the Item indexer this[DataColumn]
* System.Data.SqlClient/SqlCommand.cs: modified
tweaks to show TODO's for other CommandBehavior.
Set AllowDBNull column to true for IsKey row
in schema DataTable.
* System.Data.SqlClient/SqlConnection.cs: modified
if transaction is in progress when a Close() is called,
do a transaction Rollback.
svn path=/trunk/mcs/; revision=4946
* Test/SqlSharpCli.cs: added file
My new toy. SQL# is a command-line tool to enter
SQL commands and queries using Mono System.Data.
It also serves as a test for Mono System.Data.
* System.Data.SqlClient/SqlCommand.cs: modified
- ExecuteNonQuery(), ExecuteScalar(), and ExecuteReader()
should handle the results from SQL Commands and Queries.
- Internal class SqlResult should not create schema Table
for the result from a SQL Command. Also, set the RecordsRetrieved
property for SqlDataReader.
- Closing the SqlDataReader should Close() the SqlConnection for
a CommandBehavior.CloseConnection.
- Set defaults for SqlResult
* System.Data.SqlClient/SqlConnection.cs: modified -
when SqlDataReader is Close()
should Close() the SqlConnection for
a CommandBehavior.CloseConnection. Changed internal Property
from OpenReader get/set to IsReaderOpen get and created
internal methods OpenReader()/CloseReader() for SqlCommand to call.
SqlConnection needs to be prevented from doing while SqlDataReader
is being used.
* System.Data.SqlClient/SqlDataReader.cs: modified -
call SqlCommand's OpenReader() internal method. get
RecordsRetrieved from SqlResult. set/reset default
values for SqlDataReader.
* Test/PostgresTest.cs
* Test/TestExecuteScalar.cs
* Test/TestSqlDataReader.cs: modified
for the Execute...() methods in SqlCommand
to test SQL Queries and Commands
* Test/System.Data_test.build: modified
exclude new file Test/SqlSharpCli.cs from
test build
svn path=/trunk/mcs/; revision=4944
* System.Data.Common/DbDataAdapter.cs: remove IDbCommands, except
for get accessors. These should be implemented in derived classes. See
SqlDataAdapter for clues.
* System.Data.SqlClient/SqlDataAdapter.cs: implement IDbDataAdapter
* System.Data.Common/DataAdapter.cs:
* System.Data.Common/DataTableMappingCollection.cs:
* System.Data.Common/DataTableMapping.cs:
* System.Data.Common/DataColumnMappingCollection.cs:
* System.Data.Common/DataColumnMapping.cs:
Properly (I hope!) implement all of the appropriate interfaces
for these classes.
svn path=/trunk/mcs/; revision=4908
* System.Data.SqlClient/SqlCommand.cs: include
the BaseColumnName in the schema table. Was missed before.
* System.Data.Common/DbDataAdapter.cs: Use DataTable
mappings so that the DataSet and DataTable are more closely tied.
Get schema information from the DataTable using GetSchemaTable ()
Various other little fixes
* System.Data.Common/DataColumnMappingCollection.cs:
* System.Data.Common/DataTableMapping.cs:
* System.Data.Common/DataTableMappingCollection.cs: Some
implementation, enough to be used by DbDataAdapter.
svn path=/trunk/mcs/; revision=4891
* System.Data.SqlClient/SqlCommand.cs: set
the "ProviderType" to the PostgreSQL type oid
* System.Data.SqlClient/SqlDataReader.cs: fix
for various properties and methods that
return meta data: Item indexers this[name] and this[index],
GetFieldType, GetName, and GetOrdinal. SqlDataAdapter
should work again.
svn path=/trunk/mcs/; revision=4873