Since we are invoking make recursively to satisfy the dependencies
for any of the cyclic components, we need to inform make to not try
to parallelize any work on any of the cyclic dependencies, otherwise
multiple builds will execute building the same binary, and the result
will be truncated outputs.
For example, System's Makefile would launch all the parallel builds for
the dependencies:
$(secxml_libdir)/System.dll \
$(the_libdir_base)System.Xml.dll \
$(the_libdir_base)Mono.Security.dll \
$(bare_libdir)/System.dll
They could be launched in parallel, and in turn the makefiles on those
directories might try simultaneously to invoke recursively a component
that has not been built yet.
So we use .NOTPARALLEL to flag all the cyclic dependencies on a given
directory to instruct make to not run those in parallel.
This patch introduces an infrastructure to stage the builds for the core
assemblies that have cyclic dependencies. This deals directly with
the following cycle:
System.dll requires:
System.Configuration.dll
Mono.Security.dll
System.Xml.dll
They all require System.dll to be built
System.Xml requires:
System.dll
System.Configuration.dll
System.Security.dll requires:
System.dll
Mono.Security.dll
System.Xml.dll
Principle
=========
The patch works by directing the build infrastructure to place
intermediate build steps on their own directory. For example the
first System.dll build that only takes a dependency in mscorlib.dll is
placed not under the final directory but on a subdirectory called
"bare".
The second time that System.dll is built (after Mono.Security and
System.Xml have been built) is placed on the "secxml" directory.
The third time is the final build, and that one ends in the profile
directory.
The same principle is applied to System.Xml.
Better Dependency Tracking
==========================
To handle the multiple stages, the new Makefiles for the various
parties involved in this loop are now able to build their
dependencies. This means that typing "make" on System.Security or
System.Xml or System will build all of the intermediate steps as
required, without needing the toplevel Makefile to perform multiple
build shots to incrementally build the result.
Bug fixes
=========
We must have regressed at some point the build of System.Xml as we
were only doing one build of it, one without System.Configuration
support. This patch introduces back the changes to build System.Xml
in two steps.
This patch fixes the setup where we end up rebuilding System.dll and
overwriting it two times as the build progresses as a side effect
(this is what required LIBRARY_USE_INTERMEDIATE_FILE).
Details
=======
library.make:
Introduces a new "the_libdir_base" which is the raw directory
where the final output will go. This points to the same location
that libdir_base previously pointed to.
The existing libdir_base is modified to contain an optional
"intermediate" directory, where intermediate builds can be
placed.
Other cycles
============
The System.Design assembly was listed as having cycles, but while this
cycle exists in theory, in practice we have not implemented any of the
code that brings the cycle in System.Windows.Forms.Design's
ImageListImageEditor and chances are, we wont any time soon.
* XmlDsigEnvelopedTransformTest.cs: Added test for .ctor (bool). Use
Assert class. Improved properties tests.
* XmlDsigC14TransformTest.cs: Added test for .ctor (bool).
* XmlDsigExcC14NTransformTest.cs: Added .ctor tests and added asserts
IncludsiveNamespacesPrefixList
* XmlDsigExcC14NWithCommentsTransformTest.cs: Added basic .ctor and
properties tests.
* XmlDsigC14NWithCommentsTransformTest.cs: Fixed line endings.
* XmlLicenseTransformTest.cs: Added basic .ctor and properties tests.
* XmlDsigBase64Transform.cs: Use constant for Algorithm namespace.
* XmlDsigExcC14NTransform.cs: Fixed ctors to use WithComments
algorithm if includeComments is true. Assign includeNamespacesPrefixList
to instance field.
* XmlDsigExcC14NWithCommentsTransform.cs: Remove unnecessary
assignment to Algorithm now that base ctor is fixed.
* XmlDsigC14NWithCommentsTransform.cs: Remove unnecessary assignment
to Algorithm now that base ctor is fixed.
* XmlDsigC14NTransform.cs: In default ctor, just invoke .ctor (bool).
In .ctor (bool), assign WithComments algorithm if includeComments is
true. Use constants for Algorithm namespace.
* XmlDsigEnvelopedSignatureTransform.cs: Use constant for Algorithm
namespace.
* XmlDsigXPathTransform.cs: Use constant for Algorithm namespace.
* XmlDsigXsltTransform.cs: Use constant for Algorithm namespace.
* XmlLicenseTransform.cs: Assign Algorithm in ctor.
* XmlSignature.cs: Added constant for XmlLicenseTransform algorithm.
* System.Security_test.dll.sources: Added XmlLicenseTransformTest.cs
and XmlDsigExcC14NWithCommentsTransformTest.cs.
svn path=/trunk/mcs/; revision=115803
* Makefile (_boot_): Orchestrate the net_2_1 bootstrap.
(net_2_1_bootstrap_SUBDIRS, net_2_1_raw_SUBDIRS): New.
In build:
* profiles/net_2_1_bootstrap.make: New.
* profiles/net_2_1_raw.make: New. The untuned 2.1 profile.
* profiles/net_2_1.make: New. The tuned 2.1 profile.
* Makefile (PROFILES): Update.
In class:
* Makefile (net_3_5_dirs): Remove System.Xml.Linq, now that it's
built in the 2.0 profile.
In class/System:
* Makefile (CYCLIC_DEPS): New macro.
(CYCLIC_DEP_FILES): Use it to clean up handling of cyclic dependencies.
* net_2_1_raw_System.dll.sources: Rename from net_2_1_System.dll.sources.
* net_2_1_bootstrap_System.dll.sources: New.
In class/corlib:
* Makefile (LIBRARY_COMPILE) [net_2_1]: Remove special case.
In errors:
* Makefile: Enable testing net_2_1 profile.
In mcs:
* Makefile (GMCS_PROFILE): Remove.
(COMPILER_NAME): New helper.
In tests:
* Makefile: Enable smcs testing.
In tools:
* Makefile (net_2_1_raw_SUBDIRS): New.
In tools/compiler-tester:
* Makefile [PROFILE=net_2_1]: Copy file from net_2_1_raw profile.
* compiler-tester.cs: Work better with 'net_2_1' profiles.
In tools/tuner:
* Makefile: Improve. Update to new net_2_1 profiles. Specify
more dependencies. Do work only when necessary.
* Descriptors/smcs.xml: Add CompilerCallableEntryPoint.
svn path=/trunk/mcs/; revision=95989
* Makefile: Execute PKITS tests only if the data is installed locally.
See System.dll unit tests for details.
* System.Security_test.dll.sources: Add some PKITS unit tests to the
build.
svn path=/trunk/mcs/; revision=69543
* EncryptedXml.cs : use Padding member instead of const ISO10126 (though
I doubt it should be there). Use it in DecryptData().
* EncryptedXmlTest.cs, EncryptedXmlSample3.xml :
another decryption test for padding sanity.
* Makefile:
Added Test/S.S.C.Xml/EncryptedXmlSample3.xml to EXTRA_DISTFILES.
svn path=/trunk/mcs/; revision=65804
* EncryptedXml.cs :
Handle orthodox padding (xmlenc spec section 5.2). However, like
EncryptedXmlSample1, it might not exist, so make it optional.
* EncryptedXmlTest.cs, EncryptedXmlSample2.xml :
Added another case that expects correct padding processing which is
specified in W3C xmlenc spec section 5.2.
* Makefile:
Added Test/S.S.C.Xml/EncryptedXmlSample2.xml to EXTRA_DISTFILES.
svn path=/trunk/mcs/; revision=65766
* EncryptedXml.cs : True fix for DecryptData(). It indeed uses block size
(or possibly IV size) in Transform(), but only for stripping the heading
n bytes garbage.
* EncryptedXmlTest.cs : new file. Added practical example.
* EncryptedXmlSample1.xml, sample.pfx : support files for the above test.
* System.Security_test.dll.sources: added EncryptedXmlTest.cs.
* Makefile: added some extra test support files as EXTRA_DISTFILES.
svn path=/trunk/mcs/; revision=65750
* Makefile: Don't ignore the CS0119 warnings (private field not used)
when building the assembly (the code is already clean for this).
* System.Security.dll.sources: Add DataProtectionPermission, Attribute
and Flags to the assembly (moved from corlib).
* System.Security_test.dll.sources: Add DataProtectionPermission
Attribute unit tests (moved from corlib unit tests).
svn path=/trunk/mcs/; revision=38362
* Makefile: Added a reference to Mono.Security because we'll require
many class from it for the NET_2_0 profile - but it would be better
not to have the dependency for NET_1_1.
* System.Security.dll.sources: Added a lot of existing classes (from
1.2 documentation) that were never compiled.
svn path=/trunk/mcs/; revision=30857