* MonoSettingsSection.cs: added - a section for mono-specific
settings.
2008-10-09 Marek Habersack <[email protected]>
* BuildManager.cs: if monoSettings section is found in the
system.web section in web.config, use its contents to augment
compiler configuration. Used to work around the issue reported in
bug #433806
2008-10-09 Marek Habersack <[email protected]>
* System.Web.dll.sources: added System.Web.Configuration_2.0/MonoSettingsSection.cs
svn path=/trunk/mcs/; revision=115337
* TemplateParser.cs: make sure the generated class name is a valid
language independent identifier. Fixes bug #431622
2008-10-03 Marek Habersack <[email protected]>
* BuildManager.cs: if an assembly fails to build out of a batch of
files, extract the virtual path that was requested by the client
and attempt to compile it alone.
svn path=/trunk/mcs/; revision=114732
* OutputCacheModule.cs: invalidate cache entries when the
corresponding source file (.as?x) is recompiled by hooking up to
System.Web.Compilation.BuildManager's build cache entry removal
event. Fixes bug #429926
2008-09-29 Marek Habersack <[email protected]>
* BuildManagerRemoveEntryEventHandler.cs: added
* BuildManager.cs: added a static event to notify interested
parties when an entry is removed from the buildCache. Fixes bug
#429926.
svn path=/trunk/mcs/; revision=114369
* BuildManager.cs: when creating a cache entry for a virtual path,
make it depend on a list of files built recursively from all the
virtual path's dependencies. Fixes bug #430114
svn path=/trunk/mcs/; revision=114205
* BuildManager.cs: if an error occurs while assigning the
requested path to an assembly builder inside BuildAssembly, throw
an exception.
svn path=/trunk/mcs/; revision=105637
* SimpleWebHandlerParser.cs: refactoring - move code between
constructors, reader should be set before initializing the rest of
the object. Fixes bug #381364
* TemplateParser.cs: RegisterCustomControl must use absolute
virtual path when querying the virtual path provider for
file. Fixes bug #381364
2008-04-19 Marek Habersack <[email protected]>
* BuildManager.cs: use absolute virtual path to query the
VirtualPathProvider for path existence.
When ASP.NET is self-hosted, force
non-batch compilation. Fixes bug #380985
* ILocation.cs: added a new property, FileText.
* Location.cs: added implementation of the ILocation.FileText
property.
* ParseException.cs: use the new ILocation.FileText, if defined,
to get the file source.
* AspGenerator.cs: when TextReader is present, use it to read with
the VirtualPathProvider to read the file source. Fixes bug #381364
* AspParser.cs: added a new property FileText to provide the file
contents which was read in the constructor.
svn path=/trunk/mcs/; revision=101177
* BuildManager.cs: when any parsing error occurs during batch
building, ignore the file which caused it. If the file with
parsing error is the one requested by user, throw the parsing
exception. Fixes bug #323742
svn path=/trunk/mcs/; revision=101115
* System.Web.dll.sources: added System.Web.Compilation/AppWebReferencesCompiler.cs
2008-04-09 Marek Habersack <[email protected]>
* HttpApplicationFactory.cs: compile web references. Fixes bug
#377934
* VirtualPath.cs: added a method to convert a physical path into a
virtual one, if the physical path is under the application root.
2008-04-09 Marek Habersack <[email protected]>
* BuildManager.cs: refactoring - the SetCommonParameters and
GetDefaultCompilerTypeForLanguage moved here from BuildProvider,
and made internal static.
* AppWebReferencesCompiler.cs: added - support for compiling of
wsdl files found in the App_WebResources directory. Fixes bug
#377934
* BuildProvider.cs: refactoring - moved the SetCommonParameters
and GetDefaultCompilerTypeForLanguage to BuildManager
* WsdlBuildProvider.cs: added the CodeCompilerType property
override.
Namespace for the generated code is taken from the wsdl path,
relative to App_Code or App_WebReferences, if the wsdl in question
is under on of those directories.
GenerateCode uses OpenReader () so that VirtualPathProvider works
for wsdl files.
* AssemblyBuilder.cs: Cope with virtualPath being null in BuildAssembly.
Reference assemblies specified in web.config when linking.
svn path=/trunk/mcs/; revision=100266
* AspComponentFoundry.cs: add loaded assembly to the
BuildManager's list of referenced assemblies instead to
WebConfigurationmanager.ExtraAssemblies. Fixes bug #377915
* BuildManager.cs: Added an internal method AddToReferencedAssemblies.
Remove invalidated entry from
WebConfigurationManager.ExtraAssemblies.
svn path=/trunk/mcs/; revision=100101
* VirtualPath.cs: added
2008-04-08 Marek Habersack <[email protected]>
* System.Web.dll.sources: added System.Web/VirtualPath.cs
2008-04-08 Marek Habersack <[email protected]>
* DefaultVirtualDirectory.cs: fixed the constructor - derive
virtual directory from the original path.
AddDirectories and AddFiles combine the virtual paths properly
now.
2008-04-08 Marek Habersack <[email protected]>
* TemplateParser.cs: CodeFile/Src handling uses
HostingEnvironment.VirtualPathProvider to check for file
existence.
2008-04-08 Marek Habersack <[email protected]>
* TemplateParser.cs: CodeFile/Src handling uses
HostingEnvironment.VirtualPathProvider to check for file
existence.
2008-04-08 Marek Habersack <[email protected]>
* AppCodeCompiler.cs: VirtualPath used in PhysicalToVirtual.
* BuildManager.cs: switched to VirtualPath instead of a string
path in several methods.
Batch compilation is turned off if we have a custom
VirtualPathProvider which implements only the VirtualFile and
falls back to DefaultVirtualDirectory implementation for directory
access.
* GenericBuildProvider.cs: AddCodeFile accepts a virtual path.
* BuildProvider.cs: SetVirtualPath accepts a VirtualPath now.
* AssemblyBuilder.cs: constructors use the new VirtualPath class
now.
AddCodeFile can use the VirtualPathProvider if necessary now.
BuildAssembly overloads accept VirtualPath parameter instead of a
string path now.
* TemplateBuildProvider.cs: GetCodeBehindSource returns the
virtual path now.
svn path=/trunk/mcs/; revision=100063
* BuildManager.cs: AssertVirtualPathExists now queries the
VirtualPathProvider for path existence if physical path check
fails, before throwing the 404 exception.
2008-03-27 Marek Habersack <[email protected]>
* DefaultVirtualPathProvider.cs: support relative virtual paths in
all the methods.
* VirtualPathProvider.cs: FileExists should chain to the previous
handler, if present.
2008-03-27 Marek Habersack <[email protected]>
* Page.cs: added an implementation of the ClientQueryString
property.
2008-03-27 Marek Habersack <[email protected]>
* HttpRequest.cs: make UrlComponents internal.
* HttpContext.cs: added support for resource provider factories.
svn path=/trunk/mcs/; revision=99122
* HttpApplication.cs: use HttpRuntime.CaseInsensitive instead of
own IsRunningOnWindows.
* HttpRuntime.cs: introduce two static properties -
CaseInsensitive (set to true whenever the environment is
case-insensitive - i.e. MONO_IOMAP="all" or MONO_IOMAP="case", or
running on Windows) and RunningOnWindows.
2008-03-13 Marek Habersack <[email protected]>
* BuildManager.cs: if we're running in a case-insensitive
environment, use case-insensitive comparer for the build caches
2008-03-13 Marek Habersack <[email protected]>
* ApplicationHost.cs: use HttpRuntime.CaseInsensitive when
checking whether we're running in a case-insensitive environment.
svn path=/trunk/mcs/; revision=98199
* BuildManager.cs: implement a mechanism to ignore certain virtual
paths when batch compiling. Helps applications which may have
.as?x files which won't work on mono for various reasons (one such
sample is mojoportal).
svn path=/trunk/mcs/; revision=96982
* TemplateParser.cs: a better error message.
* ControlBuilder.cs: if one of the parent builders is a
TemplateBuilder, use it as the naming container and use its
ContainerType property as the value of the BindingContainerType
property.
2008-02-26 Marek Habersack <[email protected]>
* BuildProviderCollection.cs: be case-insensitive when looking for
the extension match.
2008-02-26 Marek Habersack <[email protected]>
* BuildManager.cs: known file types extensions are now matched
case-insensitively.
svn path=/trunk/mcs/; revision=96644
* BuildManager.cs: check for virtualPath existence before
attempting to compile the assemblies. Fixes bug #359465
2008-02-07 Marek Habersack <[email protected]>
* HttpException.cs: moved several strings to constants, for easier
maintenance.
Added 3 new constructors which let the caller to set the exception
description.
The Description property is now settable.
The stack trace at the bottom of the file is written after the
terminating </html>, inside a HTML comment. Format changed to
match MS.NET.
Error 404 is handled in a special way, to match the output with
MS.NET.
* HttpContext.cs, StaticFileHandler.cs, HttpApplication.cs: use
the new HttpException constructor for 404.
2008-02-07 Marek Habersack <[email protected]>
* PageHandlerFactory.cs: call PageParser.GetCompiledPageInstance
only - that method calls the appropriate APIs for 1.1 and 2.0
profiles.
svn path=/trunk/mcs/; revision=95135
* GenericBuildProvider.cs: GetGeneratedType may return a type even
though the results are null.
* AssemblyBuilder.cs: if there are no units and no source files,
do not attempt to compile the assembly.
* AppResourcesAssemblyBuilder.cs, AppCodeCompiler.cs: expect that
BuildAssembly may return null results.
* BuildManager.cs: If AssemblyBuilder returns no results from BuildAssembly, it might
mean we're dealing with a compilation of empty .as[hm]x files,
with no code and only code-behind in bin/. Do not report an error
in that case, only add the compiled types to the cache. Fixes bug
#357624.
svn path=/trunk/mcs/; revision=95028
* BuildManager.cs: protect non-page builds from endless recursion
if a non-page file recursively references/includes another file
from the same batch. If such case is detected, the recursively
referenced file is compiled into a separate assembly and removed
from the previous compilation batch. Fixes bug #358742.
svn path=/trunk/mcs/; revision=94968
* WebHandlerBuildProvider.cs: derive from the new
SimpleBuildProvider class.
* BuildManager.cs: full implementation of the batch compilation
for the 2.0 profile. The implementation is most probably different
to MS.NET's but the effects are the same (or nearly the same -
there are some minor differences). There are missing bits and
pieces, but minor ones - to be added later.
* SimpleBuildProvider.cs: new build provider abstract class
deriving from the GenericBuildProvider that implements common code
for building web handlers and web services.
* GenericBuildProvider.cs: new generic abstract class used to
implement base builder code for all the build provider types and
maximize code reuse.
* PageBuildProvider.cs: derive from the new TemplateBuildProvider
class and implement all the necessary abstract members.
Handle "fake" virtual paths, to properly support generating of the
WSDL helper code.
* BuildProvider.cs: SetVirtualPath now converts the passed path to
absolute URL.
Added internal virtual method GenerateCode, used by derived
classes.
SetCommonParameters no longer sets the referenced assemblies, this
is done in BuildManager now.
Added an internal virtual property CodeUnit which returns the
build provider's compilation unit.
* PageCompiler.cs: fix assignment of base types for asynchronous
pages, to match MS.NET.
For asynchronous pages, add the necessary methods generation.
* BaseCompiler.cs: default namespace is now set using a constant.
Renamed the Init method into ConstructType, to better reflect its
purpose and made the method internal - it is used by the build
providers.
Added several CreateProvider overloads for easier and more unified
compilation provider creation.
Added an internal MainClassType property to enable class type name
retrieval from other parts of the class hierarchy.
* ApplicationFileBuildProvider.cs: new build provider deriving
from the TemplateBuildProvider class to compile the global.asax
file.
* AspGenerator.cs: properly handle parsers which have no input
file path given, but use TextReader instead.
Dependencies are virtual paths now, convert them to physical ones
before creating cache dependency.
* CachingCompiler.cs: parser dependencies are virtual paths now,
convert them to physical ones before creating cache dependency.
* AssemblyBuilder.cs: full implementation of the documented
functionality as well as a lot of internal build code
added. Produces assemblies using the same style what MS.NET for
temporary and target file naming. Handles partial type squashing
if the same partial type is used by several code compile units
added to the same builder instance.
* MasterPageBuildProvider.cs: use the new TemplateBuildProvider
base class and add implementation of all the abstract methods
required by it.
* ThemeDirectoryBuildProvider.cs: new build provider to compile
theme directories. Replaces the old ThemeDirectoryCompiler class.
* UserControlBuildProvider.cs: use the new TemplateBuildProvider
base class and add implementation of all the abstract methods
required by it.
* TemplateBuildProvider.cs: new internal abstract class which
implements the common tasks for all the template control build
providers.
* WebServiceBuildProvider.cs: use the new SimpleBuildProvider base
type to implement building.
2008-01-24 Marek Habersack <[email protected]>
* PageThemeFileParser.cs: the DefaultBaseType property removed.
* ApplicationFileParser.cs: added constructor which takes a
TextReader.
Removed the DefaultBaseType property.
Added the Reader property.
* MasterPage.cs: use BuildManager to create page instance.
* WebHandlerParser.cs: added a compatibility constructor.
* TemplateControl.cs: GetTypeFromControlPath uses
BuildManager.GetCompiledType for the 2.0+ profile.
* WebServiceParser.cs: added a compatibility internal
constructor.
* SimpleWebHandlerParser.cs: properly treat context and
physicalPath parameters to the constructor, especially for the
2.0+ profile where they are obsolete.
Dependencies are added using virtual paths.
* PageThemeParser.cs: DefaultBaseType property removed.
* Page.cs: Style sheets and themes are compiled using
BuildManager.
Previous page instance is compiled using BuildManager for the 2.0+
profile.
* MasterPageParser.cs: Use BuildManager to create instance and
compile types.
Dependencies are added using virtual paths.
* SimpleHandlerFactory.cs: Use
BuildManager.CreateInstanceFromVirtualPath for the 2.0+ profile.
* UserControlParser.cs: if the parser is created using a
TextReader, take the input file path from the virtual path.
Added a new internal constructor which takes both a TextReader and
an inputFile parameters.
Set base type to the default in the constructors.
Use virtual path when setting master page dependency.
DefaultBaseTypename doesn't use a literal string in the 2.0+
profile, it gets the base type from the application
configuration.
* TemplateControlParser.cs: Dependency on a control/page mentioned
in the Reference directive is registered using the virtual path.
TextReader property is an override now.
* TemplateParser.cs: RegisterCustomControl adds a dependency on
the virtual path, not the physical path. The custom control is
compiled using BuildManager.GetCompiledType for the 2.0+ profile.
RegisterNamespace does not add a dependency on the assembly.
LoadType does not add a dependency on the assembly.
Legacy Src attribute is handled properly now.
Dependency on code-behind (Src and CodeFile directive attributes)
is added using the code-behind file's virtual path.
GetAssemblyFromSource adds a dependency using the virtual path.
DefaultBaseType implemented here, using DefaultBaseTypeName which
is implemented in the descendant classes.
Added internal CodeBehindSource property, used by build
providers.
ClassName property works correctly if inputFile is missing
(e.g. when the parser has been created using a TextReader)
Added a virtual internal property TextReader to return the readed
which has been used to create the parser instance.
* PageHandlerFactory.cs: GetHandler uses
BuildManager.CreateInstanceFromVirtualPath for the 2.0+ profile.
* PageParser.cs: set the default base type in the constructors.
If the input file is not passed to a constructor, take the input
file path from the virtual path.
GetCompiledPageInstance uses BuildManager.CreateInstanceFromVirtualPath
for the 2.0+ profile.
MasterPage dependency is set using the virtual path of the master
page.
MasterPage is compiled into a type using BuildManager.GetCompiledType.
GetCompiledPageType uses BuildManager.GetCompiledType for the 2.0
profile.
DefaultBaseType override removed, it is implemented in the
TemplateParser class.
DefaultBaseTypename doesn't use a literal string in the 2.0+
profile, it gets the base type from the application
configuration.
2008-01-24 Marek Habersack <[email protected]>
* HttpApplicationFactory.cs: use BuildManager.GetCompiledType to
build the application (global.asax) file.
svn path=/trunk/mcs/; revision=93848
* BuildManager.cs, BaseCompiler.cs: CodeAssemblies is a collection
of Assembly instances, not strings.
* CachingCompiler.cs: make sure items in the CodeAssemblies and
TopLevelAssemblies are really instances of the Assembly class
before trying to use them.
CodeAssemblies is a collection of Assembly instances, not
strings.
* AppCodeCompiler.cs: on MS.NET CodeAssemblies is a collection of
assemblies, not paths to assemblies.
svn path=/trunk/mcs/; revision=74104
* Rationalize the user of MonoTODOs.
- Removed all the TODOs that were only overwritten methods
and had no further information.
- Methods that threw exceptions now have the message "Not
implemnted".
- Methods that return some constant are declared like
that.
- Removed a bunch of stale MonoTODOs that had not been
removed.
svn path=/trunk/mcs/; revision=68620
* AssemblyBuilder.cs:
* BuildManager.cs: compile the assembly from AssemblyBuilder and use
GetGeneratedType() on the BuildProvider instead of loading the assembly
and trying a wild guess at the type name.
svn path=/trunk/mcs/; revision=56964
* System.Web.Configuration_2.0/Compiler.cs:
* System.Web.Configuration_2.0/CompilerCollection.cs: removed
compatibility code.
* System.Web.Configuration_2.0/BuildProviderCollection.cs: add
GetProviderForExtension().
* System.Web.UI/IThemeResolutionService.cs: this is now added to the
sources file, but some other stuff does not compile yet as the
interface changed after the beta.
* System.Web.UI/ObjectConverter.cs: removed extra attribute.
* System.Web.UI/ObjectStateFormatter.cs: add IStateFormatter for 2.0.
* System.Web.UI/ICallbackEventHandler.cs: update the interface, but
commented the 'good' stuff out, since other files need to be fixed
too.
* System.Web.dll.sources: add new files.
* System.Web.Configuration/CompilationConfiguration.cs:
* System.Web.Configuration/CompilationConfigurationHandler.cs: only
compile these for pre-2.0 assemblies.
* System.Web.Hosting/DefaultVirtualPathProvider.cs: add some
comments/TODO.
* System.Web.Hosting/HostingEnvironment.cs: initialize the
default value for VirtualPathProvider.
* System.Web.Compilation/CompilerType.cs: implemented.
* System.Web.Compilation/AssemblyBuilder.cs: implemented most of it.
* System.Web.Compilation/WebServiceCompiler.cs:
* System.Web.Compilation/CachingCompiler.cs: update 2.0 compiler
instance creation code.
* System.Web.Compilation/ClientBuildManager.cs: implemented some of
its methods. Not yet ready.
* System.Web.Compilation/BuildManager.cs: the more interesting methods
are implemented now.
* System.Web.Compilation/BaseCompiler.cs: delete the temporary files
in case of error.
* System.Web.Compilation/BuildProvider.cs: implemented the
Get*Compiler* protected methods.
svn path=/trunk/mcs/; revision=56781