* InputOrReplyProcessor.cs : remove SecurityHandler. WS-Trust must
be handled before endpoint dispatching (it must not pass contract
filter) and doesn't make sense to be here.
* SecurityHandler.cs : move to old-code.
* SecurityReplyChannel.cs : handle WS-Trust message here.
* SecurityRequestContext.cs : so, do not pass those messages here.
* SslSecurityTokenAuthenticator.cs,
AuthenticatorCommunicationObject.cs,
SecureConversationSecurityTokenAuthenticator.cs :
add timeout argument to negotication requests.
* System.ServiceModel.dll.sources: remove SecurityHandler.cs
svn path=/trunk/mcs/; revision=160244
* ChannelDispatcher.cs : do not swallow exception during
RequestContext.get_RequestMessage() and thus return SOAP Fault for
MessageSecurityException to the client.
svn path=/trunk/mcs/; revision=160122
* HttpTransportBindingElement.cs :
Use new HTTP channel listener implementation.
* ChannelDispatcher.cs : enable service throttling again.
This time Http(Listener), ASP.NET and TCP listeners all work.
* System.ServiceModel.dll.sources :
add new HTTP channel listener implementation sources.
Old sources will be kept for a while, won't entirely vanish as
ASP.NET support will live there.
svn path=/trunk/mcs/; revision=159491
* ServiceHostBase.cs : Do not build more than one ChannelDispatcher
for a Binding. Then check duplicate listen URIs, excluding mex ones.
* ChannelDispatcher.cs : add simple bool field to mark for mex channel.
* ServiceMetadataExtension.cs : use simple ChannelDispatcher.IsMex field.
* ServiceHostTest.cs : improved endpoint tests and enabled them.
* ChannelDispatcherTest.cs : had to disable a test that regressed from
validating duplicate listen URI. Possible remedy is described too.
svn path=/trunk/mcs/; revision=159140
* ServiceHostBase.cs : retrieve MessageVersion and raise an error
if there is none. (Check this earlier than building a listener.)
* ChannelDispatcher.cs : MessageVersion check is moved to
ServiceHostBase.
* ServiceMetadataExtension.cs : overwrite MessageVersion to use None.
(The only special case I found for ChannelDispatcher.MessageVersion.)
* CustomBindingTest.cs : add tests for MessageVersion check on Open().
* MetadataExchangeBindingsTest.cs : make sure that special casing of
MessageVersion does not happen at this layer.
svn path=/trunk/mcs/; revision=159061
* OperationInvokerHandler.cs, MessageProcessingContext.cs :
ChannelDispatcher may be null, so check its availability before
using it. Don't use it, when possible.
* DispatchOperation.cs : remove unused member.
svn path=/trunk/mcs/; revision=158871
* OperationDescription.cs : add contract origin flags to identify
which operation should be used for client operations (and dispatch
too in the future).
* MessageDescription.cs : add IsRequest flag to indicate if it is
for request or not.
* ServiceContractGenerator.cs, ContractDescriptionGenerator.cs :
make use of above changes.
* ContractDescription.cs : don't create extraneous ClientOperations
in irrelevant message direction.
* EndpointDispatcher.cs, BaseMessagesFormatter.cs:
Now MessageDescription.Direction is differentiated from "IsRequest"
property, to precisely identify request/reply in callbacks. Also
now we don't have to create extraneous ContractDescription for
callbacks.
* DuplexClientRuntimeChannel.cs : do not create and use extraneous
ContractDescription for callback contract. Non-callback ones now
works fine.
This fixes service part of bug #567672, IsOneWay = true case.
svn path=/trunk/mcs/; revision=158454
* ContractDescriptionGenerator.cs : Now callback contract methods are
also reflected into OperationDescription as well as those from non-
callback contract. Callback methods have reverse MessageDirection,
so adjust them.
* ContractDescription.cs, ServiceEndpoint.cs, TypedMessageConverter.cs :
A bit of renaming / reflect method call changes.
* EndpointDispatcher.cs, DispatchRuntime.cs, ClientRuntime.cs :
now Callback[Dispatch|Client]Runtime properties are always filled
so that users can configure the callback runtimes (not sure such
configured runtimes work fine yet, but it is a required step).
* InputOrReplyRequestProcessor.cs : instead of HasCallbackRuntime
hack, use CallbackClientRuntime.CallbackContractType for checking
callback existence.
* ClientProxyGenerator.cs : CreateProxyType now carefully considers
requested proxy type, contract type and callback contract type.
i.e. now the resulting proxy has implemented methods for callbacks
that are also filled at ContractDescription.
* ClientRuntimeChannel.cs : reflect some method call changes.
svn path=/trunk/mcs/; revision=158412
* ContractDescription.cs : fill ClientOperation.Formatter here.
(It is hacky, see additional comment.)
* ClientRuntimeChannel.cs : replace GetFormatter() with Formatter.
* ClientOperation.cs : do the same for client side too.
svn path=/trunk/mcs/; revision=158083
* DispatchOperation.cs : on callback channels ChannelDispatcher is
not available. Wait for something like ClientRuntime.ChannelFactory.
svn path=/trunk/mcs/; revision=158082
* TcpDuplexSessionChannel.cs, TcpReplyChannel.cs : do not set RelatesTo
here. If the contract is not one-way (IsOneWay = false) and there is
a callback, the callback message sent to the client should *not* be
assigned RelatesTo header here. Just do it in the request-reply
context. Do it in OperationInvokerHandler.
* OperationInvokerHandler.cs : assign RelatesTo header item here.
svn path=/trunk/mcs/; revision=157950
* ChannelDispatcher.cs : disable slottling again :( It still fails
to process concurrent requests if there is service metadata channel
and MaxConcurrentSessions > 1 on non-ASP.NET channels.
svn path=/trunk/mcs/; revision=157670
* ChannelDispatcher.cs : enable throttling again. Though issues
regarding parallel request is not here (multiple dispatchers
can accept a channels for each), and HTTP channels do not accept
more than one channel at a time anyways.
svn path=/trunk/mcs/; revision=157662
* OperationInvokerHandler.cs : workaround NRE issue in AsyncCallTest.
The original code was worse than this workaround.
svn path=/trunk/mcs/; revision=155788
* EndpointAddressMessageFilter.cs : check null arg. Return false for
no To header case and do not result in NRE.f
* EndpointAddressMessageFilterTest.cs :
Add null arg case. Enable working test.
svn path=/trunk/mcs/; revision=154787
* BaseMessagesFormatter.cs : hasParameter check is incorrectly
restrictive to reject some kinds of pairs.
* CustomPeerResolverServiceTest.cs : enabled all disabled tests.
svn path=/trunk/mcs/; revision=154781
* ClientRuntimeChannel.cs :
use DataContractSerializer.IsStartObject() to check if the fault
detail reader is for the fault contract, in addition to Action.
* FaultContractInfo.cs : add serializer property.
svn path=/trunk/mcs/; revision=154712
* EndpointDispatcher.cs : fill FaultContractInfos.
* DispatchOperation.cs : do not fill them dynamically/automatically.
* ErrorProcessingHandler.cs : added some FIXME notes.
svn path=/trunk/mcs/; revision=154690
* ChannelDispatcher.cs : differentiate EndpointNotFound and
ActionNotSupported so that FaultConverter can create appropriate
fault messages. Removed extra filter condition on null To item.
And create fault messages on *any* server side error, do not let
request client infinitely wait for the response until timeout.
(RunDestinationUnreachableTest() is still not working but it works
when it is SOAP 1.2.)
svn path=/trunk/mcs/; revision=154439
* ChannelDispatcher.cs : for faults, use fault namespace, not that of
ReplyAction. Added FIXME comment regarding dispatcher.
svn path=/trunk/mcs/; revision=154427
* ChannelDispatcher.cs : return EndpointDispatcher at initializing
for internal use. Add some locks. Patch by Matt Dargavel.
* ServiceHostBase.cs : if there is an existing ChannelDispatcher
for the same endpoint URI, reuse it. Patch by Matt Dargavel.
svn path=/trunk/mcs/; revision=154114
* ServiceRuntimeChannel.cs, ServiceProxyGenerator.cs:
make them public and add Contract property for service callback
proxies too for the same reason.
* InputOrReplyRequestProcessor.cs : now ServiceRuntimeChannel is
moved to fake public namespace.
svn path=/trunk/mcs/; revision=152523
* ChannelDispatcher.cs : revert previous change - it could result
in blocking some threads and block nunit completion.
svn path=/trunk/mcs/; revision=151960
* ChannelDispatcher.cs : now I can enable service throttling to
handle more than one concurrent channels as ASP.NET reply channel
got fixed.
* HTTP_listener_notes.txt: Fixed some wrong description, simplified
some, and updated some.
svn path=/trunk/mcs/; revision=150851
* ChannelDispatcher.cs : actually instance context provider could be
null through the entire service run.
Fixed all current nunit failures!
svn path=/trunk/mcs/; revision=150110
* DuplexClientRuntimeChannel.cs : do not try to iterate channel
acceptor when it is being closed.
* ChannelDispatcher.cs : do not try to iterate channel acceptor when
it is being closed.
svn path=/trunk/mcs/; revision=150047
* CommunicationObject.cs : when process state changes, lock the
object to make sure the state transition is valid.
Change OnClosed/OnClosing to do the way OnOpened/OnOpening does.
* ChannelDispatcher.cs : another error audit.
svn path=/trunk/mcs/; revision=149793
* ContractDescriptionGenerator.cs : fix GetCallbackContract() to
correctly retrieve ServiceContractAttribute from the service type,
not the callback type. This ended up to get the bug #567672 sample
working (but it will break at some stage as it involves some
non-implemented classes).
* EndpointDispatcher.cs, InputOrReplyRequestProcessor.cs :
Pass service type to correctly retrieve ServiceContractAttribute
from the service type, not callback type.
* ServiceProxyGenerator.cs, ServiceRuntimeChannel.cs :
Pass service type to correctly retrieve ServiceContractAttribute
from the service type, not callback type.
* CallbackBehaviorAttributeTest.cs : added callback example from
bug #567672.
svn path=/trunk/mcs/; revision=149226
* ChannelDispatcher.cs : make sure to unlock channel acceptor wait
handle when the delegated method resulted in an error.
svn path=/trunk/mcs/; revision=149162