diff --git a/fdts/stm32mp15-pinctrl.dtsi b/fdts/stm32mp15-pinctrl.dtsi index d3d1744ec..058cde264 100644 --- a/fdts/stm32mp15-pinctrl.dtsi +++ b/fdts/stm32mp15-pinctrl.dtsi @@ -31,6 +31,16 @@ }; }; + i2c2_pins_a: i2c2-0 { + pins { + pinmux = , /* I2C2_SCL */ + ; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + qspi_clk_pins_a: qspi-clk-0 { pins { pinmux = ; /* QSPI_CLK */ @@ -166,6 +176,15 @@ }; }; + sdmmc2_d47_pins_d: sdmmc2-d47-3 { + pins { + pinmux = , /* SDMMC2_D4 */ + , /* SDMMC2_D5 */ + , /* SDMMC2_D6 */ + ; /* SDMMC2_D7 */ + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = ; /* UART4_TX */ diff --git a/fdts/stm32mp151.dtsi b/fdts/stm32mp151.dtsi index 8f175a649..c350c66de 100644 --- a/fdts/stm32mp151.dtsi +++ b/fdts/stm32mp151.dtsi @@ -121,6 +121,21 @@ status = "disabled"; }; + i2c2: i2c@40013000 { + compatible = "st,stm32mp15-i2c"; + reg = <0x40013000 0x400>; + interrupt-names = "event", "error"; + interrupts = <&exti 22 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + #address-cells = <1>; + #size-cells = <0>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + wakeup-source; + status = "disabled"; + }; + uart7: serial@40018000 { compatible = "st,stm32h7-uart"; reg = <0x40018000 0x400>; diff --git a/fdts/stm32mp157c-odyssey-som.dtsi b/fdts/stm32mp157c-odyssey-som.dtsi new file mode 100644 index 000000000..6bed33968 --- /dev/null +++ b/fdts/stm32mp157c-odyssey-som.dtsi @@ -0,0 +1,325 @@ +/* + * Copyright (C) 2019, STMicroelectronics. All Rights Reserved. + * Copyright (C) 2021, Grzegorz Szymaszek. + * + * SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) + */ + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxac-pinctrl.dtsi" +#include +#include "stm32mp15-ddr3-1x4Gb-1066-binG.dtsi" + +/ { + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&bsec { + board_id: board_id@ec { + reg = <0xec 0x4>; + st,non-secure-otp; + }; +}; + +&clk_hse { + st,digbypass; +}; + +&cpu0 { + cpu-supply = <&vddcore>; +}; + +&cpu1 { + cpu-supply = <&vddcore>; +}; + +&cryp1 { + status = "okay"; +}; + +&hash1 { + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&exti_pwr 55 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; + ldo1-supply = <&v3v3>; + ldo2-supply = <&vin>; + ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; + ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + v1v8_audio: ldo1 { + regulator-name = "v1v8_audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + v3v3_hdmi: ldo2 { + regulator-name = "v3v3_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdda: ldo5 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + }; + + v1v2_hdmi: ldo6 { + regulator-name = "v1v2_hdmi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + regulator-active-discharge = <1>; + }; + }; + + pmic_watchdog: watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&rcc { + secure-status = "disabled"; + st,clksrc = < + CLK_MPU_PLL1P + CLK_AXI_PLL2P + CLK_MCU_PLL3P + CLK_PLL12_HSE + CLK_PLL3_HSE + CLK_PLL4_HSE + CLK_RTC_LSE + CLK_MCO1_DISABLED + CLK_MCO2_DISABLED + >; + + st,clkdiv = < + 1 /*MPU*/ + 0 /*AXI*/ + 0 /*MCU*/ + 1 /*APB1*/ + 1 /*APB2*/ + 1 /*APB3*/ + 1 /*APB4*/ + 2 /*APB5*/ + 23 /*RTC*/ + 0 /*MCO1*/ + 0 /*MCO2*/ + >; + + st,pkcs = < + CLK_CKPER_HSE + CLK_FMC_ACLK + CLK_QSPI_ACLK + CLK_ETH_PLL4P + CLK_SDMMC12_PLL4P + CLK_DSI_DSIPLL + CLK_STGEN_HSE + CLK_USBPHY_HSE + CLK_SPI2S1_PLL3Q + CLK_SPI2S23_PLL3Q + CLK_SPI45_HSI + CLK_SPI6_HSI + CLK_I2C46_HSI + CLK_SDMMC3_PLL4P + CLK_USBO_USBPHY + CLK_ADC_CKPER + CLK_CEC_LSE + CLK_I2C12_HSI + CLK_I2C35_HSI + CLK_UART1_HSI + CLK_UART24_HSI + CLK_UART35_HSI + CLK_UART6_HSI + CLK_UART78_HSI + CLK_SPDIF_PLL4P + CLK_FDCAN_PLL4R + CLK_SAI1_PLL3Q + CLK_SAI2_PLL3Q + CLK_SAI3_PLL3Q + CLK_SAI4_PLL3Q + CLK_RNG1_LSI + CLK_RNG2_LSI + CLK_LPTIM1_PCLK1 + CLK_LPTIM23_PCLK3 + CLK_LPTIM45_LSE + >; + + /* VCO = 1300.0 MHz => P = 650 (CPU) */ + pll1: st,pll@0 { + compatible = "st,stm32mp1-pll"; + reg = <0>; + cfg = <2 80 0 0 0 PQR(1,0,0)>; + frac = <0x800>; + }; + + /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ + pll2: st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; + cfg = <2 65 1 0 0 PQR(1,1,1)>; + frac = <0x1400>; + }; + + /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ + pll3: st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; + cfg = <1 33 1 16 36 PQR(1,1,1)>; + frac = <0x1a04>; + }; + + /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ + pll4: st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; + cfg = <3 98 5 7 7 PQR(1,1,1)>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_d>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; + mmc-ddr-3_3v; + status = "okay"; +}; diff --git a/fdts/stm32mp157c-odyssey.dts b/fdts/stm32mp157c-odyssey.dts new file mode 100644 index 000000000..03800f991 --- /dev/null +++ b/fdts/stm32mp157c-odyssey.dts @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2019, STMicroelectronics. All Rights Reserved. + * Copyright (C) 2021, Grzegorz Szymaszek. + * + * SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) + */ + +/dts-v1/; + +#include "stm32mp157c-odyssey-som.dtsi" + +/ { + model = "Seeed Studio Odyssey-STM32MP157C Board"; + compatible = "seeed,stm32mp157c-odyssey", + "seeed,stm32mp157c-odyssey-som", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&sdmmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + disable-wp; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +};