CTCaer/switch-l4t-atf
1
0
Fork 0
mirror of https://github.com/CTCaer/switch-l4t-atf.git synced 2024-12-01 05:40:27 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Hikey960: Change to use recommended power state id format

Browse Source 
ARM Power State Coordination Interface (ARM DEN 0022D) chapter
6.5 "Recommended StateID Encoding" defines the state ID which can be
used by platforms. The recommended power states can be presented by
below values; and it divides into three fields, every field has 4 bits
to present power states corresponding to core level, cluster level and
system level.

  0: Run
  1: Standby
  2: Retention
  3: Powerdown

This commit changes to use upper recommended power states definition on
Hikey960; and changes the power state validate function to check the
power state passed from kernel side.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
This commit is contained in:
Leo Yan 2017-11-24 14:19:51 +08:00
parent a852ec4605
commit fdae60b6ba
2 changed files with 64 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

87
plat/hisilicon/hikey960/hikey960_pm.c
View File

@ -26,6 +26,38 @@
#define SYSTEM_PWR_STATE(state) \
((state)->pwr_domain_state[PLAT_MAX_PWR_LVL])
#define PSTATE_WIDTH 4
#define PSTATE_MASK ((1 << PSTATE_WIDTH) - 1)
#define MAKE_PWRSTATE(lvl2_state, lvl1_state, lvl0_state, pwr_lvl, type) \
(((lvl2_state) << (PSTATE_ID_SHIFT + PSTATE_WIDTH * 2)) | \
((lvl1_state) << (PSTATE_ID_SHIFT + PSTATE_WIDTH)) | \
((lvl0_state) << (PSTATE_ID_SHIFT)) | \
((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
((type) << PSTATE_TYPE_SHIFT))
/*
* The table storing the valid idle power states. Ensure that the
* array entries are populated in ascending order of state-id to
* enable us to use binary search during power state validation.
* The table must be terminated by a NULL entry.
*/
const unsigned int hikey960_pwr_idle_states[] = {
/* State-id - 0x001 */
MAKE_PWRSTATE(PLAT_MAX_RUN_STATE, PLAT_MAX_RUN_STATE,
PLAT_MAX_STB_STATE, MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
/* State-id - 0x002 */
MAKE_PWRSTATE(PLAT_MAX_RUN_STATE, PLAT_MAX_RUN_STATE,
PLAT_MAX_RET_STATE, MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
/* State-id - 0x003 */
MAKE_PWRSTATE(PLAT_MAX_RUN_STATE, PLAT_MAX_RUN_STATE,
PLAT_MAX_OFF_STATE, MPIDR_AFFLVL0, PSTATE_TYPE_POWERDOWN),
/* State-id - 0x033 */
MAKE_PWRSTATE(PLAT_MAX_RUN_STATE, PLAT_MAX_OFF_STATE,
PLAT_MAX_OFF_STATE, MPIDR_AFFLVL1, PSTATE_TYPE_POWERDOWN),
0,
};
#define DMAC_GLB_REG_SEC 0x694
#define AXI_CONF_BASE 0x820
@ -36,16 +68,21 @@ static void hikey960_pwr_domain_standby(plat_local_state_t cpu_state)
unsigned long scr;
unsigned int val = 0;
assert(cpu_state == PLAT_MAX_RET_STATE);
assert(cpu_state == PLAT_MAX_STB_STATE ||
cpu_state == PLAT_MAX_RET_STATE);
scr = read_scr_el3();
/* Enable Physical IRQ and FIQ to wake the CPU*/
write_scr_el3(scr | SCR_IRQ_BIT | SCR_FIQ_BIT);
set_retention_ticks(val);
if (cpu_state == PLAT_MAX_RET_STATE)
set_retention_ticks(val);
wfi();
clr_retention_ticks(val);
if (cpu_state == PLAT_MAX_RET_STATE)
clr_retention_ticks(val);
/*
* Restore SCR to the original value, synchronisazion of
@ -124,38 +161,34 @@ static void __dead2 hikey960_system_reset(void)
int hikey960_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state)
{
int pstate = psci_get_pstate_type(power_state);
int pwr_lvl = psci_get_pstate_pwrlvl(power_state);
unsigned int state_id;
int i;
assert(req_state);
if (pwr_lvl > PLAT_MAX_PWR_LVL)
return PSCI_E_INVALID_PARAMS;
/* Sanity check the requested state */
if (pstate == PSTATE_TYPE_STANDBY) {
/*
* It's possible to enter standby only on power level 0
* Ignore any other power level.
*/
if (pwr_lvl != MPIDR_AFFLVL0)
return PSCI_E_INVALID_PARAMS;
req_state->pwr_domain_state[MPIDR_AFFLVL0] =
PLAT_MAX_RET_STATE;
} else {
for (i = MPIDR_AFFLVL0; i <= pwr_lvl; i++)
req_state->pwr_domain_state[i] =
PLAT_MAX_OFF_STATE;
/*
* Currently we are using a linear search for finding the matching
* entry in the idle power state array. This can be made a binary
* search if the number of entries justify the additional complexity.
*/
for (i = 0; !!hikey960_pwr_idle_states[i]; i++) {
if (power_state == hikey960_pwr_idle_states[i])
break;
}
/*
* We expect the 'state id' to be zero.
*/
if (psci_get_pstate_id(power_state))
/* Return error if entry not found in the idle state array */
if (!hikey960_pwr_idle_states[i])
return PSCI_E_INVALID_PARAMS;
i = 0;
state_id = psci_get_pstate_id(power_state);
/* Parse the State ID and populate the state info parameter */
while (state_id) {
req_state->pwr_domain_state[i++] = state_id & PSTATE_MASK;
state_id >>= PSTATE_WIDTH;
}
return PSCI_E_SUCCESS;
}

6
plat/hisilicon/hikey960/include/platform_def.h
View File

@ -31,8 +31,10 @@
#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CORE_COUNT + \
PLATFORM_CLUSTER_COUNT + 1)
#define PLAT_MAX_RET_STATE 1
#define PLAT_MAX_OFF_STATE 2
#define PLAT_MAX_RUN_STATE 0
#define PLAT_MAX_STB_STATE 1
#define PLAT_MAX_RET_STATE 2
#define PLAT_MAX_OFF_STATE 3
#define MAX_IO_DEVICES 3
#define MAX_IO_HANDLES 4