mirror of
https://github.com/CTCaer/switch-l4t-atf.git
synced 2024-11-27 03:40:22 +00:00
231d0b351d
Fix the version inconsistency in the same file. I tested QEMU 5.0.0, and it worked for me. Change-Id: I9d8ca9aae1e413410eb5676927e13ae4aee9fad8 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
139 lines
4.4 KiB
ReStructuredText
139 lines
4.4 KiB
ReStructuredText
QEMU virt Armv8-A
|
|
=================
|
|
|
|
Trusted Firmware-A (TF-A) implements the EL3 firmware layer for QEMU virt
|
|
Armv8-A. BL1 is used as the BootROM, supplied with the -bios argument.
|
|
When QEMU starts all CPUs are released simultaneously, BL1 selects a
|
|
primary CPU to handle the boot and the secondaries are placed in a polling
|
|
loop to be released by normal world via PSCI.
|
|
|
|
BL2 edits the Flattened Device Tree, FDT, generated by QEMU at run-time to
|
|
add a node describing PSCI and also enable methods for the CPUs.
|
|
|
|
If ``ARM_LINUX_KERNEL_AS_BL33`` is set to 1 then this FDT will be passed to BL33
|
|
via register x0, as expected by a Linux kernel. This allows a Linux kernel image
|
|
to be booted directly as BL33 rather than using a bootloader.
|
|
|
|
An ARM64 defconfig v5.5 Linux kernel is known to boot, FDT doesn't need to be
|
|
provided as it's generated by QEMU.
|
|
|
|
Current limitations:
|
|
|
|
- Only cold boot is supported
|
|
|
|
Getting non-TF images
|
|
---------------------
|
|
|
|
``QEMU_EFI.fd`` can be downloaded from
|
|
http://snapshots.linaro.org/components/kernel/leg-virt-tianocore-edk2-upstream/latest/QEMU-KERNEL-AARCH64/RELEASE_GCC5/QEMU_EFI.fd
|
|
|
|
or, can be built as follows:
|
|
|
|
.. code:: shell
|
|
|
|
git clone https://github.com/tianocore/edk2.git
|
|
cd edk2
|
|
git submodule update --init
|
|
make -C BaseTools
|
|
source edksetup.sh
|
|
export GCC5_AARCH64_PREFIX=aarch64-linux-gnu-
|
|
build -a AARCH64 -t GCC5 -p ArmVirtPkg/ArmVirtQemuKernel.dsc
|
|
|
|
````
|
|
|
|
Then, you will get ``Build/ArmVirtQemuKernel-AARCH64/DEBUG_GCC5/FV/QEMU_EFI.fd``
|
|
|
|
Please note you do not need to use GCC 5 in spite of the environment variable
|
|
``GCC5_AARCH64_PREFIX``
|
|
|
|
The rootfs can be built by using Buildroot as follows:
|
|
|
|
.. code:: shell
|
|
|
|
git clone git://git.buildroot.net/buildroot.git
|
|
cd buildroot
|
|
make qemu_aarch64_virt_defconfig
|
|
utils/config -e BR2_TARGET_ROOTFS_CPIO
|
|
utils/config -e BR2_TARGET_ROOTFS_CPIO_GZIP
|
|
make olddefconfig
|
|
make
|
|
|
|
Then, you will get ``output/images/rootfs.cpio.gz``.
|
|
|
|
Booting via semi-hosting option
|
|
-------------------------------
|
|
|
|
Boot binaries, except BL1, are primarily loaded via semi-hosting so all
|
|
binaries has to reside in the same directory as QEMU is started from. This
|
|
is conveniently achieved with symlinks the local names as:
|
|
|
|
- ``bl2.bin`` -> BL2
|
|
- ``bl31.bin`` -> BL31
|
|
- ``bl33.bin`` -> BL33 (``QEMU_EFI.fd``)
|
|
- ``Image`` -> linux/arch/arm64/boot/Image
|
|
|
|
To build:
|
|
|
|
.. code:: shell
|
|
|
|
make CROSS_COMPILE=aarch64-none-elf- PLAT=qemu
|
|
|
|
To start (QEMU v5.0.0):
|
|
|
|
.. code:: shell
|
|
|
|
qemu-system-aarch64 -nographic -machine virt,secure=on -cpu cortex-a57 \
|
|
-kernel Image \
|
|
-append "console=ttyAMA0,38400 keep_bootcon" \
|
|
-initrd rootfs.cpio.gz -smp 2 -m 1024 -bios bl1.bin \
|
|
-d unimp -semihosting-config enable,target=native
|
|
|
|
Booting via flash based firmwares
|
|
---------------------------------
|
|
|
|
Boot firmwares are loaded via secure FLASH0 device so ``bl1.bin`` and
|
|
``fip.bin`` should be concatenated to create a ``flash.bin`` that is flashed
|
|
onto secure FLASH0.
|
|
|
|
- ``bl32.bin`` -> BL32 (``tee-header_v2.bin``)
|
|
- ``bl32_extra1.bin`` -> BL32 Extra1 (``tee-pager_v2.bin``)
|
|
- ``bl32_extra2.bin`` -> BL32 Extra2 (``tee-pageable_v2.bin``)
|
|
- ``bl33.bin`` -> BL33 (``QEMU_EFI.fd``)
|
|
- ``Image`` -> linux/arch/arm64/boot/Image
|
|
|
|
To build:
|
|
|
|
.. code:: shell
|
|
|
|
make CROSS_COMPILE=aarch64-linux-gnu- PLAT=qemu BL32=bl32.bin \
|
|
BL32_EXTRA1=bl32_extra1.bin BL32_EXTRA2=bl32_extra2.bin \
|
|
BL33=bl33.bin BL32_RAM_LOCATION=tdram SPD=opteed all fip
|
|
|
|
To build with TBBR enabled, BL31 and BL32 encrypted with test key:
|
|
|
|
.. code:: shell
|
|
|
|
make CROSS_COMPILE=aarch64-linux-gnu- PLAT=qemu BL32=bl32.bin \
|
|
BL32_EXTRA1=bl32_extra1.bin BL32_EXTRA2=bl32_extra2.bin \
|
|
BL33=bl33.bin BL32_RAM_LOCATION=tdram SPD=opteed all fip \
|
|
MBEDTLS_DIR=<path-to-mbedtls-repo> TRUSTED_BOARD_BOOT=1 \
|
|
GENERATE_COT=1 DECRYPTION_SUPPORT=aes_gcm FW_ENC_STATUS=0 \
|
|
ENCRYPT_BL31=1 ENCRYPT_BL32=1
|
|
|
|
To build flash.bin:
|
|
|
|
.. code:: shell
|
|
|
|
dd if=build/qemu/release/bl1.bin of=flash.bin bs=4096 conv=notrunc
|
|
dd if=build/qemu/release/fip.bin of=flash.bin seek=64 bs=4096 conv=notrunc
|
|
|
|
To start (QEMU v5.0.0):
|
|
|
|
.. code:: shell
|
|
|
|
qemu-system-aarch64 -nographic -machine virt,secure=on -cpu cortex-a57 \
|
|
-kernel Image -no-acpi \
|
|
-append 'console=ttyAMA0,38400 keep_bootcon' \
|
|
-initrd rootfs.cpio.gz -smp 2 -m 1024 -bios flash.bin \
|
|
-d unimp
|