switch-l4t-atf/fdts/rtsm_ve-motherboard.dtsi
Roberto Vargas e230f4d54d Remove dtc warnings
DTC generates warnings when unit names begin with 0, or
when a node containing a reg or range property doesn't have a unit name
in the node name. This patch fixes those cases.

Change-Id: If24ec68ef3034fb3fcefb96c5625c47a0bbd8474
Signed-off-by: Roberto Vargas <roberto.vargas@arm.com>
2018-04-24 08:30:01 +01:00

252 lines
6.2 KiB
Plaintext

/*
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
motherboard {
arm,v2m-memory-map = "rs1";
compatible = "arm,vexpress,v2m-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
#size-cells = <1>;
ranges;
flash@0,00000000 {
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>,
<4 0x00000000 0x04000000>;
bank-width = <4>;
};
vram@2,00000000 {
compatible = "arm,vexpress-vram";
reg = <2 0x00000000 0x00800000>;
};
ethernet@2,02000000 {
compatible = "smsc,lan91c111";
reg = <2 0x02000000 0x10000>;
interrupts = <0 15 4>;
};
v2m_clk24mhz: clk24mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "v2m:clk24mhz";
};
v2m_refclk1mhz: refclk1mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <1000000>;
clock-output-names = "v2m:refclk1mhz";
};
v2m_refclk32khz: refclk32khz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "v2m:refclk32khz";
};
iofpga@3,00000000 {
compatible = "arm,amba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
v2m_sysreg: sysreg@10000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
v2m_sysctl: sysctl@20000 {
compatible = "arm,sp810", "arm,primecell";
reg = <0x020000 0x1000>;
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
clock-names = "refclk", "timclk", "apb_pclk";
#clock-cells = <1>;
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};
aaci@40000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x040000 0x1000>;
interrupts = <0 11 4>;
clocks = <&v2m_clk24mhz>;
clock-names = "apb_pclk";
};
mmci@50000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <0 9 4 0 10 4>;
cd-gpios = <&v2m_sysreg 0 0>;
wp-gpios = <&v2m_sysreg 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
clock-names = "mclk", "apb_pclk";
};
kmi@60000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x060000 0x1000>;
interrupts = <0 12 4>;
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@70000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x070000 0x1000>;
interrupts = <0 13 4>;
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
clock-names = "KMIREFCLK", "apb_pclk";
};
v2m_serial0: uart@90000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x090000 0x1000>;
interrupts = <0 5 4>;
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial1: uart@a0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0a0000 0x1000>;
interrupts = <0 6 4>;
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial2: uart@b0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0b0000 0x1000>;
interrupts = <0 7 4>;
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
clock-names = "uartclk", "apb_pclk";
};
v2m_serial3: uart@c0000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0c0000 0x1000>;
interrupts = <0 8 4>;
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
clock-names = "uartclk", "apb_pclk";
};
wdt@f0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0f0000 0x1000>;
interrupts = <0 0 4>;
clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
clock-names = "wdogclk", "apb_pclk";
};
v2m_timer01: timer@110000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x110000 0x1000>;
interrupts = <0 2 4>;
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
v2m_timer23: timer@120000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 3 4>;
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
clock-names = "timclken1", "timclken2", "apb_pclk";
};
rtc@170000 {
compatible = "arm,pl031", "arm,primecell";
reg = <0x170000 0x1000>;
interrupts = <0 4 4>;
clocks = <&v2m_clk24mhz>;
clock-names = "apb_pclk";
};
clcd@1f0000 {
compatible = "arm,pl111", "arm,primecell";
reg = <0x1f0000 0x1000>;
interrupts = <0 14 4>;
clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
clock-names = "clcdclk", "apb_pclk";
mode = "XVGA";
use_dma = <0>;
framebuffer = <0x18000000 0x00180000>;
};
virtio_block@130000 {
compatible = "virtio,mmio";
reg = <0x130000 0x1000>;
interrupts = <0 0x2a 4>;
};
};
v2m_fixed_3v3: fixedregulator {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
mcc {
compatible = "arm,vexpress,config-bus", "simple-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
v2m_oscclk1: osc {
/* CLCD clock */
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 1>;
freq-range = <23750000 63500000>;
#clock-cells = <0>;
clock-output-names = "v2m:oscclk1";
};
/*
* Not supported in FVP models
*
* reset@0 {
* compatible = "arm,vexpress-reset";
* arm,vexpress-sysreg,func = <5 0>;
* };
*/
muxfpga {
compatible = "arm,vexpress-muxfpga";
arm,vexpress-sysreg,func = <7 0>;
};
/*
* Not used - Superseded by PSCI sys_poweroff
*
* shutdown@0 {
* compatible = "arm,vexpress-shutdown";
* arm,vexpress-sysreg,func = <8 0>;
* };
*/
/*
* Not used - Superseded by PSCI sys_reset
*
* reboot@0 {
* compatible = "arm,vexpress-reboot";
* arm,vexpress-sysreg,func = <9 0>;
* };
*/
dvimode {
compatible = "arm,vexpress-dvimode";
arm,vexpress-sysreg,func = <11 0>;
};
};
};