mirror of
https://github.com/CTCaer/switch-l4t-atf.git
synced 2024-12-13 21:58:51 +00:00
e35d0edbbf
The board features the Hi3798C V200 with an integrated quad-core
64-bit ARM Cortex A53 processor and high performance Mali T720 GPU,
making it capable of running any commercial set-top solution based on
Linux or Android. Its high performance specification also supports a
premium user experience with up to H.265 HEVC decoding of 4K video at
60 frames per second.
SOC Hisilicon Hi3798CV200
CPU Quad-core ARM Cortex-A53 64 bit
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
USB Two USB 2.0 ports One USB 3.0 ports
CONSOLE USB-micro port for console support
ETHERNET 1 GBe Ethernet
PCIE One PCIe 2.0 interfaces
JTAG 8-Pin JTAG
EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
WIFI 802.11AC 2*2 with Bluetooth
CONNECTORS One connector for Smart Card One connector for TSI
The platform boot sequence is as follows:
l-loader --> arm_trusted_firmware --> u-boot
Repositories:
- https://github.com/Linaro/poplar-l-loader.git
- https://github.com/Linaro/poplar-u-boot.git
U-Boot is also upstream in the project's master branch.
Make sure you are using the correct branch on each one of these
repositories. The definition of "correct" might change over time (at
this moment in time this would be the "latest" branch).
Build Line:
make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none DEBUG=1
PLAT=poplar BL33=/path/to/u-boot.bin
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
166 lines
5.1 KiB
ReStructuredText
166 lines
5.1 KiB
ReStructuredText
Description
|
||
===========
|
||
|
||
Poplar is the first development board compliant with the 96Boards Enterprise
|
||
Edition TV Platform specification.
|
||
|
||
The board features the Hi3798C V200 with an integrated quad-core 64-bit
|
||
ARM Cortex A53 processor and high performance Mali T720 GPU, making it capable
|
||
of running any commercial set-top solution based on Linux or Android.
|
||
|
||
It supports a premium user experience with up to H.265 HEVC decoding of 4K
|
||
video at 60 frames per second.
|
||
|
||
SOC Hisilicon Hi3798CV200
|
||
CPU Quad-core ARM Cortex-A53 64 bit
|
||
DRAM DDR3/3L/4 SDRAM interface, maximum 32-bit data width 2 GB
|
||
USB Two USB 2.0 ports One USB 3.0 ports
|
||
CONSOLE USB-micro port for console support
|
||
ETHERNET 1 GBe Ethernet
|
||
PCIE One PCIe 2.0 interfaces
|
||
JTAG 8-Pin JTAG
|
||
EXPANSION INTERFACE Linaro 96Boards Low Speed Expansion slot
|
||
DIMENSION Standard 160×120 mm 96Boards Enterprice Edition form factor
|
||
WIFI 802.11AC 2*2 with Bluetooth
|
||
CONNECTORS One connector for Smart Card One connector for TSI
|
||
|
||
At the start of the boot sequence, the bootROM executes the so called l-loader
|
||
binary whose main role is to change the processor state to 64bit mode. This
|
||
must happen prior invoking the arm trusted firmware:
|
||
|
||
l-loader --> arm_trusted_firmware --> u-boot
|
||
|
||
How to build
|
||
============
|
||
|
||
Code Locations
|
||
--------------
|
||
|
||
- ARM Trusted Firmware:
|
||
`link <https://github.com/ARM-software/arm-trusted-firmware>`__
|
||
|
||
- l-loader:
|
||
`link <https://github.com/Linaro/poplar-l-loader.git>`__
|
||
|
||
- u-boot:
|
||
`link <http://git.denx.de/u-boot.git>`__
|
||
|
||
Build Procedure
|
||
---------------
|
||
|
||
- Fetch all the above 3 repositories into local host.
|
||
Make all the repositories in the same ${BUILD\_PATH}.
|
||
|
||
- Prepare the AARCH64 toolchain.
|
||
|
||
- Build u-boot using poplar_defconfig
|
||
make CROSS_COMPILE=aarch64-linux-gnu- poplar_defconfig
|
||
make CROSS_COMPILE=aarch64-linux-gnu-
|
||
|
||
- Build atf providing the previously generated u-boot.bin as the BL33 image
|
||
make CROSS_COMPILE=aarch64-linux-gnu- all fip SPD=none PLAT=poplar
|
||
BL33=u-boot.bin
|
||
|
||
- Build l-loader (generated the final fastboot.bin)
|
||
1. copy the atf generated files fip.bin and bl1.bin to l-loader/atf/
|
||
2. export ARM_TRUSTED_FIRMWARE=${ATF_SOURCE_PATH)
|
||
3. make
|
||
|
||
Install Procedure
|
||
-----------------
|
||
|
||
- Copy l-loader/fastboot.bin to a FAT partition on a USB pen drive.
|
||
|
||
- Plug the USB pen drive to any of the USB2 ports
|
||
|
||
- Power the board while keeping S3 pressed (usb_boot)
|
||
|
||
The system will boot into a u-boot shell which you can then use to write the
|
||
working firmware to eMMC.
|
||
|
||
Boot trace
|
||
==========
|
||
|
||
Bootrom start
|
||
Boot Media: eMMC
|
||
Decrypt auxiliary code ...OK
|
||
|
||
lsadc voltage min: 000000FE, max: 000000FF, aver: 000000FE, index: 00000000
|
||
|
||
Entry boot auxiliary code
|
||
|
||
Auxiliary code - v1.00
|
||
DDR code - V1.1.2 20160205
|
||
Build: Mar 24 2016 - 17:09:44
|
||
Reg Version: v134
|
||
Reg Time: 2016/03/18 09:44:55
|
||
Reg Name: hi3798cv2dmb_hi3798cv200_ddr3_2gbyte_8bitx4_4layers.reg
|
||
|
||
Boot auxiliary code success
|
||
Bootrom success
|
||
|
||
LOADER: Switched to aarch64 mode
|
||
LOADER: Entering ARM TRUSTED FIRMWARE
|
||
LOADER: CPU0 executes at 0x000ce000
|
||
|
||
INFO: BL1: 0xe1000 - 0xe7000 [size = 24576]
|
||
NOTICE: Booting Trusted Firmware
|
||
NOTICE: BL1: v1.3(debug):v1.3-372-g1ba9c60
|
||
NOTICE: BL1: Built : 17:51:33, Apr 30 2017
|
||
INFO: BL1: RAM 0xe1000 - 0xe7000
|
||
INFO: BL1: Loading BL2
|
||
INFO: Loading image id=1 at address 0xe9000
|
||
INFO: Image id=1 loaded at address 0xe9000, size = 0x5008
|
||
NOTICE: BL1: Booting BL2
|
||
INFO: Entry point address = 0xe9000
|
||
INFO: SPSR = 0x3c5
|
||
NOTICE: BL2: v1.3(debug):v1.3-372-g1ba9c60
|
||
NOTICE: BL2: Built : 17:51:33, Apr 30 2017
|
||
INFO: BL2: Loading BL31
|
||
INFO: Loading image id=3 at address 0x129000
|
||
INFO: Image id=3 loaded at address 0x129000, size = 0x8038
|
||
INFO: BL2: Loading BL33
|
||
INFO: Loading image id=5 at address 0x37000000
|
||
INFO: Image id=5 loaded at address 0x37000000, size = 0x58f17
|
||
NOTICE: BL1: Booting BL31
|
||
INFO: Entry point address = 0x129000
|
||
INFO: SPSR = 0x3cd
|
||
INFO: Boot bl33 from 0x37000000 for 364311 Bytes
|
||
NOTICE: BL31: v1.3(debug):v1.3-372-g1ba9c60
|
||
NOTICE: BL31: Built : 17:51:33, Apr 30 2017
|
||
INFO: BL31: Initializing runtime services
|
||
INFO: BL31: Preparing for EL3 exit to normal world
|
||
INFO: Entry point address = 0x37000000
|
||
INFO: SPSR = 0x3c9
|
||
|
||
|
||
U-Boot 2017.05-rc2-00130-gd2255b0 (Apr 30 2017 - 17:51:28 +0200)poplar
|
||
|
||
Model: HiSilicon Poplar Development Board
|
||
BOARD: Hisilicon HI3798cv200 Poplar
|
||
DRAM: 1 GiB
|
||
MMC: Hisilicon DWMMC: 0
|
||
In: serial@f8b00000
|
||
Out: serial@f8b00000
|
||
Err: serial@f8b00000
|
||
Net: Net Initialization Skipped
|
||
No ethernet found.
|
||
|
||
Hit any key to stop autoboot: 0
|
||
starting USB...
|
||
USB0: USB EHCI 1.00
|
||
scanning bus 0 for devices... 1 USB Device(s) found
|
||
USB1: USB EHCI 1.00
|
||
scanning bus 1 for devices... 4 USB Device(s) found
|
||
scanning usb for storage devices... 1 Storage Device(s) found
|
||
scanning usb for ethernet devices... 1 Ethernet Device(s) found
|
||
|
||
USB device 0:
|
||
Device 0: Vendor: SanDisk Rev: 1.00 Prod: Cruzer Blade
|
||
Type: Removable Hard Disk
|
||
Capacity: 7632.0 MB = 7.4 GB (15630336 x 512)
|
||
... is now current device
|
||
Scanning usb 0:1...
|
||
=>
|
||
|