Cemu-Android/BUILD.md

Build instructions

Windows

Prerequisites:

• A recent version of Visual Studio 2022 (recommended but not required) with the following additional components:
  • C++ CMake tools for Windows
  • Windows 10/11 SDK
• git

Instructions:

1. Run git clone --recursive https://github.com/cemu-project/Cemu
2. Launch Cemu/generate_vs_solution.bat.
   • If you installed VS to a custom location or use VS 2019, you may need to manually change the path inside the .bat file.
3. Wait until it's done, then open Cemu/build/Cemu.sln in Visual Studio.
4. Then build the solution and once finished you can run and debug it, or build it and check the /bin folder for the final Cemu_release.exe.

You can also skip steps 3-5 and open the root folder of the cloned repo directly in Visual Studio (as a folder) and use the built-in CMake support but be warned that cmake support in VS can be a bit finicky.

Linux

To compile Cemu, a recent enough compiler and STL with C++20 support is required! clang-12 or higher is what we recommend.

Installing dependencies

For Ubuntu and derivatives:

sudo apt install -y cmake curl freeglut3-dev git libgcrypt20-dev libglm-dev libgtk-3-dev libpulse-dev libsecret-1-dev libsystemd-dev nasm ninja-build

Additionally, for Ubuntu 22.04 only:

• sudo apt install -y clang-12
• At step 3 while building, use
  cmake -S . -B build -DCMAKE_BUILD_TYPE=release -DCMAKE_C_COMPILER=/usr/bin/clang-12 -DCMAKE_CXX_COMPILER=/usr/bin/clang++-12 -G Ninja -DCMAKE_MAKE_PROGRAM=/usr/bin/ninja

For Arch and derivatives:

sudo pacman -S --needed base-devel clang cmake freeglut git glm gtk3 libgcrypt libpulse libsecret linux-headers llvm nasm ninja systemd unzip zip

For Fedora and derivatives:

sudo dnf install clang cmake cubeb-devel freeglut-devel git glm-devel gtk3-devel kernel-headers libgcrypt-devel libsecret-devel nasm ninja-build perl-core systemd-devel zlib-devel

Build Cemu using cmake and clang

1. git clone --recursive https://github.com/cemu-project/Cemu
2. cd Cemu
3. cmake -S . -B build -DCMAKE_BUILD_TYPE=release -DCMAKE_C_COMPILER=/usr/bin/clang -DCMAKE_CXX_COMPILER=/usr/bin/clang++ -G Ninja
4. cmake --build build
5. You should now have a Cemu executable file in the /bin folder, which you can run using ./bin/Cemu_release.

Using GCC

While we use and test Cemu using clang, using GCC might work better with your distro (they should be fairly similar performance/issues wise and should only be considered if compilation is the issue).
You can use GCC by doing the following:

• make sure you have g++ installed in your system
  • installation for Ubuntu and derivatives: sudo apt install g++
  • installation for Fedora and derivatives: sudo dnf install gcc-c++
• replace the step 3 with the following: cmake -S . -B build -DCMAKE_BUILD_TYPE=release -DCMAKE_C_COMPILER=/usr/bin/gcc -DCMAKE_CXX_COMPILER=/usr/bin/g++ -G Ninja

Troubleshooting steps

• If step 3 gives you an error about not being able to find ninja, try appending -DCMAKE_MAKE_PROGRAM=/usr/bin/ninja to the command and running it again.
• If step 3 fails while compiling the boost-build dependency, it means you don't have a working/good standard library installation. Check the integrity of your system headers and making sure that C++ related packages are installed and intact.
• If step 3 gives a random error, read the [package-name-and-platform]-out.log and [package-name-and-platform]-err.log for the actual reason to see if you might be lacking the headers from a dependency.
• If step 3 is still failing or if you're not able to find the cause, please make an issue on our Github about it!
• If step 3 fails during rebuild after git pull with an error that mentions RPATH, add this to the end of step 3: -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON
• If step 4 gives you an error that contains something like main.cpp.o: in function 'std::__cxx11::basic_string..., you likely are experiencing a clang-14 issue. This can only be fixed by either lowering the clang version or using GCC, see below.
• If step 4 gives you a different error, you could report it to this repo or try using GCC. Just make sure your standard library and compilers are updated since Cemu uses a lot of modern features!
• If step 4 gives you undefined libdecor_xx, you are likely experiencing an issue with sdl2 package that comes with vcpkg. Delete sdl2 from vcpkg.json in source file and recompile.
• If step 4 gives you fatal error: 'span' file not found, then you're either missing libstdc++ or are using a version that's too old. Install at least v10 with your package manager, eg sudo apt install libstdc++-10-dev. See #644.

macOS

To compile Cemu, a recent enough compiler and STL with C++20 support is required! LLVM 13 and below, built in LLVM, and Xcode LLVM don't support the C++20 feature set required. The OpenGL graphics API isn't support on macOS, Vulkan must be used. Additionally Vulkan must be used through the Molten-VK compatibility layer

On Apple Silicon Macs, Rosetta 2 and the x86_64 version of Homebrew must be used

You can skip this section if you have an Intel Mac. Every time you compile, you need to perform steps 2.

1. softwareupdate --install-rosetta # Install Rosetta 2 if you don't have it. This only has to be done once
2. arch -x86_64 zsh # run an x64 shell

Installing brew

1. /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
2. eval "$(/usr/local/Homebrew/bin/brew shellenv)" # set x86_64 brew env

Installing dependencies

brew install boost git cmake llvm ninja nasm molten-vk

Build Cemu using cmake and clang

1. git clone --recursive https://github.com/cemu-project/Cemu
2. cd Cemu
3. cmake -S . -B build -DCMAKE_BUILD_TYPE=release -DCMAKE_C_COMPILER=/usr/local/opt/llvm/bin/clang -DCMAKE_CXX_COMPILER=/usr/local/opt/llvm/bin/clang++ -G Ninja
4. cmake --build build
5. You should now have a Cemu executable file in the /bin folder, which you can run using ./bin/Cemu_release.

Troubleshooting steps

• If step 3 gives you an error about not being able to find ninja, try appending -DCMAKE_MAKE_PROGRAM=/usr/local/bin/ninja to the command and running it again.

Updating Cemu and source code

1. To update your Cemu local repository, use the command git pull --recurse-submodules (run this command on the Cemu root).
   • This should update your local copy of Cemu and all of its dependencies.
2. Then, you can rebuild Cemu using the steps listed above, according to whether you use Linux or Windows.

If CMake complains about Cemu already being compiled or another similar error, try deleting the CMakeCache.txt file inside the build folder and retry building.