ppsspp/GPU/Software/Rasterizer.cpp

// Copyright (c) 2013- PPSSPP Project.

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, version 2.0 or later versions.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License 2.0 for more details.

// A copy of the GPL 2.0 should have been included with the program.
// If not, see http://www.gnu.org/licenses/

// Official git repository and contact information can be found at
// https://github.com/hrydgard/ppsspp and http://www.ppsspp.org/.

#include <algorithm>
#include <cmath>

#include "base/basictypes.h"
#include "profiler/profiler.h"

#include "Common/ThreadPools.h"
#include "Common/ColorConv.h"
#include "Core/Config.h"
#include "Core/MemMap.h"
#include "Core/Reporting.h"
#include "GPU/GPUState.h"

#include "GPU/Common/TextureDecoder.h"
#include "GPU/Software/SoftGpu.h"
#include "GPU/Software/Rasterizer.h"
#include "GPU/Software/Sampler.h"

#if defined(_M_SSE)
#include <emmintrin.h>
#endif

namespace Rasterizer {

// Only OK on x64 where our stack is aligned
#if defined(_M_SSE) && !defined(_M_IX86)
static inline __m128 Interpolate(const __m128 &c0, const __m128 &c1, const __m128 &c2, int w0, int w1, int w2, float wsum) {
	__m128 v = _mm_mul_ps(c0, _mm_cvtepi32_ps(_mm_set1_epi32(w0)));
	v = _mm_add_ps(v, _mm_mul_ps(c1, _mm_cvtepi32_ps(_mm_set1_epi32(w1))));
	v = _mm_add_ps(v, _mm_mul_ps(c2, _mm_cvtepi32_ps(_mm_set1_epi32(w2))));
	return _mm_mul_ps(v, _mm_set_ps1(wsum));
}

static inline __m128i Interpolate(const __m128i &c0, const __m128i &c1, const __m128i &c2, int w0, int w1, int w2, float wsum) {
	return _mm_cvtps_epi32(Interpolate(_mm_cvtepi32_ps(c0), _mm_cvtepi32_ps(c1), _mm_cvtepi32_ps(c2), w0, w1, w2, wsum));
}
#endif

// NOTE: When not casting color0 and color1 to float vectors, this code suffers from severe overflow issues.
// Not sure if that should be regarded as a bug or if casting to float is a valid fix.

static inline Vec4<int> Interpolate(const Vec4<int> &c0, const Vec4<int> &c1, const Vec4<int> &c2, int w0, int w1, int w2, float wsum) {
#if defined(_M_SSE) && !defined(_M_IX86)
	return Vec4<int>(Interpolate(c0.ivec, c1.ivec, c2.ivec, w0, w1, w2, wsum));
#else
	return ((c0.Cast<float>() * w0 + c1.Cast<float>() * w1 + c2.Cast<float>() * w2) * wsum).Cast<int>();
#endif
}

static inline Vec3<int> Interpolate(const Vec3<int> &c0, const Vec3<int> &c1, const Vec3<int> &c2, int w0, int w1, int w2, float wsum) {
#if defined(_M_SSE) && !defined(_M_IX86)
	return Vec3<int>(Interpolate(c0.ivec, c1.ivec, c2.ivec, w0, w1, w2, wsum));
#else
	return ((c0.Cast<float>() * w0 + c1.Cast<float>() * w1 + c2.Cast<float>() * w2) * wsum).Cast<int>();
#endif
}

static inline Vec2<float> Interpolate(const Vec2<float> &c0, const Vec2<float> &c1, const Vec2<float> &c2, int w0, int w1, int w2, float wsum) {
#if defined(_M_SSE) && !defined(_M_IX86)
	return Vec2<float>(Interpolate(c0.vec, c1.vec, c2.vec, w0, w1, w2, wsum));
#else
	return (c0 * w0 + c1 * w1 + c2 * w2) * wsum;
#endif
}

static inline Vec4<float> Interpolate(const float &c0, const float &c1, const float &c2, const Vec4<float> &w0, const Vec4<float> &w1, const Vec4<float> &w2, const Vec4<float> &wsum_recip) {
#if defined(_M_SSE) && !defined(_M_IX86)
	__m128 v = _mm_mul_ps(w0.vec, _mm_set1_ps(c0));
	v = _mm_add_ps(v, _mm_mul_ps(w1.vec, _mm_set1_ps(c1)));
	v = _mm_add_ps(v, _mm_mul_ps(w2.vec, _mm_set1_ps(c2)));
	return _mm_mul_ps(v, wsum_recip.vec);
#else
	return (w0 * c0 + w1 * c1 + w2 * c2) * wsum_recip;
#endif
}

static inline Vec4<float> Interpolate(const float &c0, const float &c1, const float &c2, const Vec4<int> &w0, const Vec4<int> &w1, const Vec4<int> &w2, const Vec4<float> &wsum_recip) {
	return Interpolate(c0, c1, c2, w0.Cast<float>(), w1.Cast<float>(), w2.Cast<float>(), wsum_recip);
}

static inline u8 ClampFogDepth(float fogdepth) {
	if (fogdepth <= 0.0f)
		return 0;
	else if (fogdepth >= 1.0f)
		return 255;
	else
		return (u8)(u32)(fogdepth * 255.0f);
}

static inline int ClampUV(int v, int height) {
	if (v >= height - 1)
		return height - 1;
	else if (v < 0)
		return 0;
	return v;
}

static inline int WrapUV(int v, int height) {
	return v & (height - 1);
}

template <int N>
static inline void ApplyTexelClamp(int out_u[N], int out_v[N], const int u[N], const int v[N], int width, int height) {
	if (gstate.isTexCoordClampedS()) {
		for (int i = 0; i < N; ++i) {
			out_u[i] = ClampUV(u[i], width);
		}
	} else {
		for (int i = 0; i < N; ++i) {
			out_u[i] = WrapUV(u[i], width);
		}
	}
	if (gstate.isTexCoordClampedT()) {
		for (int i = 0; i < N; ++i) {
			out_v[i] = ClampUV(v[i], height);
		}
	} else {
		for (int i = 0; i < N; ++i) {
			out_v[i] = WrapUV(v[i], height);
		}
	}
}

template <int N>
static inline void ApplyTexelClampQuad(int out_u[N * 4], int out_v[N * 4], const int u[N], const int v[N], int width, int height) {
	if (gstate.isTexCoordClampedS()) {
		for (int i = 0; i < N * 4; ++i) {
			out_u[i] = ClampUV(u[i >> 2] + (i & 1), width);
		}
	} else {
		for (int i = 0; i < N * 4; ++i) {
			out_u[i] = WrapUV(u[i >> 2] + (i & 1), width);
		}
	}
	if (gstate.isTexCoordClampedT()) {
		for (int i = 0; i < N * 4; ++i) {
			out_v[i] = ClampUV(v[i >> 2] + ((i >> 1) & 1), height);
		}
	} else {
		for (int i = 0; i < N * 4; ++i) {
			out_v[i] = WrapUV(v[i >> 2] + ((i >> 1) & 1), height);
		}
	}
}

static inline void GetTexelCoordinates(int level, float s, float t, int& out_u, int& out_v)
{
	int width = gstate.getTextureWidth(level);
	int height = gstate.getTextureHeight(level);

	int base_u = (int)(s * width * 256.0f + 0.375f);
	int base_v = (int)(t * height * 256.0f + 0.375f);

	base_u >>= 8;
	base_v >>= 8;

	ApplyTexelClamp<1>(&out_u, &out_v, &base_u, &base_v, width, height);
}

static inline void GetTexelCoordinatesQuad(int level, float in_s, float in_t, int u[4], int v[4], int &frac_u, int &frac_v)
{
	// 8 bits of fractional UV
	int width = gstate.getTextureWidth(level);
	int height = gstate.getTextureHeight(level);

	int base_u = (int)(in_s * width * 256.0f + 0.375f) - 128;
	int base_v = (int)(in_t * height * 256.0f + 0.375f) - 128;

	frac_u = (int)(base_u) & 0xff;
	frac_v = (int)(base_v) & 0xff;

	base_u >>= 8;
	base_v >>= 8;

	// Need to generate and individually wrap/clamp the four sample coordinates. Ugh.
	ApplyTexelClampQuad<1>(u, v, &base_u, &base_v, width, height);
}

static inline void GetTextureCoordinates(const VertexData& v0, const VertexData& v1, const float p, float &s, float &t) {
	switch (gstate.getUVGenMode()) {
	case GE_TEXMAP_TEXTURE_COORDS:
	case GE_TEXMAP_UNKNOWN:
	case GE_TEXMAP_ENVIRONMENT_MAP:
		{
			// TODO: What happens if vertex has no texture coordinates?
			// Note that for environment mapping, texture coordinates have been calculated during lighting
			float q0 = 1.f / v0.clippos.w;
			float q1 = 1.f / v1.clippos.w;
			float wq0 = p * q0;
			float wq1 = (1.0f - p) * q1;

			float q_recip = 1.0f / (wq0 + wq1);
			s = (v0.texturecoords.s() * wq0 + v1.texturecoords.s() * wq1) * q_recip;
			t = (v0.texturecoords.t() * wq0 + v1.texturecoords.t() * wq1) * q_recip;
		}
		break;
	case GE_TEXMAP_TEXTURE_MATRIX:
		{
			// projection mapping, TODO: Move this code to TransformUnit!
			Vec3<float> source;
			switch (gstate.getUVProjMode()) {
			case GE_PROJMAP_POSITION:
				source = (v0.modelpos * p + v1.modelpos * (1.0f - p));
				break;

			case GE_PROJMAP_UV:
				source = Vec3f((v0.texturecoords * p + v1.texturecoords * (1.0f - p)), 0.0f);
				break;

			case GE_PROJMAP_NORMALIZED_NORMAL:
				source = (v0.normal.Normalized() * p + v1.normal.Normalized() * (1.0f - p));
				break;

			case GE_PROJMAP_NORMAL:
				source = (v0.normal * p + v1.normal * (1.0f - p));
				break;

			default:
				ERROR_LOG_REPORT(G3D, "Software: Unsupported UV projection mode %x", gstate.getUVProjMode());
				break;
			}

			Mat3x3<float> tgen(gstate.tgenMatrix);
			Vec3<float> stq = tgen * source + Vec3<float>(gstate.tgenMatrix[9], gstate.tgenMatrix[10], gstate.tgenMatrix[11]);
			float z_recip = 1.0f / stq.z;
			s = stq.x * z_recip;
			t = stq.y * z_recip;
		}
		break;
	default:
		ERROR_LOG_REPORT(G3D, "Software: Unsupported texture mapping mode %x!", gstate.getUVGenMode());
		s = 0.0f;
		t = 0.0f;
		break;
	}
}

static inline void GetTextureCoordinates(const VertexData& v0, const VertexData& v1, const VertexData& v2, const Vec4<int> &w0, const Vec4<int> &w1, const Vec4<int> &w2, const Vec4<float> &wsum_recip, Vec4<float> &s, Vec4<float> &t)
{
	switch (gstate.getUVGenMode()) {
	case GE_TEXMAP_TEXTURE_COORDS:
	case GE_TEXMAP_UNKNOWN:
	case GE_TEXMAP_ENVIRONMENT_MAP:
		{
			// TODO: What happens if vertex has no texture coordinates?
			// Note that for environment mapping, texture coordinates have been calculated during lighting
			float q0 = 1.f / v0.clippos.w;
			float q1 = 1.f / v1.clippos.w;
			float q2 = 1.f / v2.clippos.w;
			Vec4<float> wq0 = w0.Cast<float>() * q0;
			Vec4<float> wq1 = w1.Cast<float>() * q1;
			Vec4<float> wq2 = w2.Cast<float>() * q2;

			Vec4<float> q_recip = (wq0 + wq1 + wq2).Reciprocal();
			s = Interpolate(v0.texturecoords.s(), v1.texturecoords.s(), v2.texturecoords.s(), wq0, wq1, wq2, q_recip);
			t = Interpolate(v0.texturecoords.t(), v1.texturecoords.t(), v2.texturecoords.t(), wq0, wq1, wq2, q_recip);
		}
		break;
	case GE_TEXMAP_TEXTURE_MATRIX:
		for (int i = 0; i < 4; ++i) {
			// projection mapping, TODO: Move this code to TransformUnit!
			Vec3<float> source;
			switch (gstate.getUVProjMode()) {
			case GE_PROJMAP_POSITION:
				source = (v0.modelpos * w0[i] + v1.modelpos * w1[i] + v2.modelpos * w2[i]) * wsum_recip[i];
				break;

			case GE_PROJMAP_UV:
				source = Vec3f((v0.texturecoords * w0[i] + v1.texturecoords * w1[i] + v2.texturecoords * w2[i]) * wsum_recip[i], 0.0f);
				break;

			case GE_PROJMAP_NORMALIZED_NORMAL:
				source = (v0.normal.Normalized() * w0[i] + v1.normal.Normalized() * w1[i] + v2.normal.Normalized() * w2[i]) * wsum_recip[i];
				break;

			case GE_PROJMAP_NORMAL:
				source = (v0.normal * w0[i] + v1.normal * w1[i] + v2.normal * w2[i]) * wsum_recip[i];
				break;

			default:
				ERROR_LOG_REPORT(G3D, "Software: Unsupported UV projection mode %x", gstate.getUVProjMode());
				break;
			}

			Mat3x3<float> tgen(gstate.tgenMatrix);
			Vec3<float> stq = tgen * source + Vec3<float>(gstate.tgenMatrix[9], gstate.tgenMatrix[10], gstate.tgenMatrix[11]);
			float z_recip = 1.0f / stq.z;
			s[i] = stq.x * z_recip;
			t[i] = stq.y * z_recip;
		}
		break;
	default:
		ERROR_LOG_REPORT(G3D, "Software: Unsupported texture mapping mode %x!", gstate.getUVGenMode());
		s = Vec4<float>::AssignToAll(0.0f);
		t = Vec4<float>::AssignToAll(0.0f);
		break;
	}
}

// NOTE: These likely aren't endian safe
static inline u32 GetPixelColor(int x, int y)
{
	switch (gstate.FrameBufFormat()) {
	case GE_FORMAT_565:
		return RGB565ToRGBA8888(fb.Get16(x, y, gstate.FrameBufStride()));

	case GE_FORMAT_5551:
		return RGBA5551ToRGBA8888(fb.Get16(x, y, gstate.FrameBufStride()));

	case GE_FORMAT_4444:
		return RGBA4444ToRGBA8888(fb.Get16(x, y, gstate.FrameBufStride()));

	case GE_FORMAT_8888:
		return fb.Get32(x, y, gstate.FrameBufStride());

	case GE_FORMAT_INVALID:
		_dbg_assert_msg_(G3D, false, "Software: invalid framebuf format.");
	}
	return 0;
}

static inline void SetPixelColor(int x, int y, u32 value)
{
	switch (gstate.FrameBufFormat()) {
	case GE_FORMAT_565:
		fb.Set16(x, y, gstate.FrameBufStride(), RGBA8888ToRGB565(value));
		break;

	case GE_FORMAT_5551:
		fb.Set16(x, y, gstate.FrameBufStride(), RGBA8888ToRGBA5551(value));
		break;

	case GE_FORMAT_4444:
		fb.Set16(x, y, gstate.FrameBufStride(), RGBA8888ToRGBA4444(value));
		break;

	case GE_FORMAT_8888:
		fb.Set32(x, y, gstate.FrameBufStride(), value);
		break;

	case GE_FORMAT_INVALID:
		_dbg_assert_msg_(G3D, false, "Software: invalid framebuf format.");
	}
}

static inline u16 GetPixelDepth(int x, int y)
{
	return depthbuf.Get16(x, y, gstate.DepthBufStride());
}

static inline void SetPixelDepth(int x, int y, u16 value)
{
	depthbuf.Set16(x, y, gstate.DepthBufStride(), value);
}

static inline u8 GetPixelStencil(int x, int y)
{
	if (gstate.FrameBufFormat() == GE_FORMAT_565) {
		// Always treated as 0 for comparison purposes.
		return 0;
	} else if (gstate.FrameBufFormat() == GE_FORMAT_5551) {
		return ((fb.Get16(x, y, gstate.FrameBufStride()) & 0x8000) != 0) ? 0xFF : 0;
	} else if (gstate.FrameBufFormat() == GE_FORMAT_4444) {
		return Convert4To8(fb.Get16(x, y, gstate.FrameBufStride()) >> 12);
	} else {
		return fb.Get32(x, y, gstate.FrameBufStride()) >> 24;
	}
}

static inline void SetPixelStencil(int x, int y, u8 value)
{
	// TODO: This seems like it maybe respects the alpha mask (at least in some scenarios?)

	if (gstate.FrameBufFormat() == GE_FORMAT_565) {
		// Do nothing
	} else if (gstate.FrameBufFormat() == GE_FORMAT_5551) {
		u16 pixel = fb.Get16(x, y, gstate.FrameBufStride()) & ~0x8000;
		pixel |= value != 0 ? 0x8000 : 0;
		fb.Set16(x, y, gstate.FrameBufStride(), pixel);
	} else if (gstate.FrameBufFormat() == GE_FORMAT_4444) {
		u16 pixel = fb.Get16(x, y, gstate.FrameBufStride()) & ~0xF000;
		pixel |= (u16)value << 12;
		fb.Set16(x, y, gstate.FrameBufStride(), pixel);
	} else {
		u32 pixel = fb.Get32(x, y, gstate.FrameBufStride()) & ~0xFF000000;
		pixel |= (u32)value << 24;
		fb.Set32(x, y, gstate.FrameBufStride(), pixel);
	}
}

static inline bool DepthTestPassed(int x, int y, u16 z)
{
	u16 reference_z = GetPixelDepth(x, y);

	switch (gstate.getDepthTestFunction()) {
	case GE_COMP_NEVER:
		return false;

	case GE_COMP_ALWAYS:
		return true;

	case GE_COMP_EQUAL:
		return (z == reference_z);

	case GE_COMP_NOTEQUAL:
		return (z != reference_z);

	case GE_COMP_LESS:
		return (z < reference_z);

	case GE_COMP_LEQUAL:
		return (z <= reference_z);

	case GE_COMP_GREATER:
		return (z > reference_z);

	case GE_COMP_GEQUAL:
		return (z >= reference_z);

	default:
		return 0;
	}
}

static inline bool IsRightSideOrFlatBottomLine(const Vec2<int>& vertex, const Vec2<int>& line1, const Vec2<int>& line2)
{
	if (line1.y == line2.y) {
		// just check if vertex is above us => bottom line parallel to x-axis
		return vertex.y < line1.y;
	} else {
		// check if vertex is on our left => right side
		return vertex.x < line1.x + (line2.x - line1.x) * (vertex.y - line1.y) / (line2.y - line1.y);
	}
}

static inline bool StencilTestPassed(u8 stencil)
{
	// TODO: Does the masking logic make any sense?
	stencil &= gstate.getStencilTestMask();
	u8 ref = gstate.getStencilTestRef() & gstate.getStencilTestMask();
	switch (gstate.getStencilTestFunction()) {
		case GE_COMP_NEVER:
			return false;

		case GE_COMP_ALWAYS:
			return true;

		case GE_COMP_EQUAL:
			return ref == stencil;

		case GE_COMP_NOTEQUAL:
			return ref != stencil;

		case GE_COMP_LESS:
			return ref < stencil;

		case GE_COMP_LEQUAL:
			return ref <= stencil;

		case GE_COMP_GREATER:
			return ref > stencil;

		case GE_COMP_GEQUAL:
			return ref >= stencil;
	}
	return true;
}

static inline u8 ApplyStencilOp(int op, int x, int y)
{
	u8 old_stencil = GetPixelStencil(x, y); // TODO: Apply mask?
	u8 reference_stencil = gstate.getStencilTestRef(); // TODO: Apply mask?

	switch (op) {
		case GE_STENCILOP_KEEP:
			return old_stencil;

		case GE_STENCILOP_ZERO:
			return 0;

		case GE_STENCILOP_REPLACE:
			return reference_stencil;

		case GE_STENCILOP_INVERT:
			return ~old_stencil;

		case GE_STENCILOP_INCR:
			switch (gstate.FrameBufFormat()) {
			case GE_FORMAT_8888:
				if (old_stencil != 0xFF) {
					return old_stencil + 1;
				}
				return old_stencil;
			case GE_FORMAT_5551:
				return 0xFF;
			case GE_FORMAT_4444:
				if (old_stencil < 0xF0) {
					return old_stencil + 0x10;
				}
				return old_stencil;
			default:
				return old_stencil;
			}
			break;

		case GE_STENCILOP_DECR:
			switch (gstate.FrameBufFormat()) {
			case GE_FORMAT_4444:
				if (old_stencil >= 0x10)
					return old_stencil - 0x10;
				break;
			default:
				if (old_stencil != 0)
					return old_stencil - 1;
				return old_stencil;
			}
			break;
	}

	return old_stencil;
}

static inline u32 ApplyLogicOp(GELogicOp op, u32 old_color, u32 new_color)
{
	switch (op) {
	case GE_LOGIC_CLEAR:
		new_color = 0;
		break;

	case GE_LOGIC_AND:
		new_color = new_color & old_color;
		break;

	case GE_LOGIC_AND_REVERSE:
		new_color = new_color & ~old_color;
		break;

	case GE_LOGIC_COPY:
		//new_color = new_color;
		break;

	case GE_LOGIC_AND_INVERTED:
		new_color = ~new_color & old_color;
		break;

	case GE_LOGIC_NOOP:
		new_color = old_color;
		break;

	case GE_LOGIC_XOR:
		new_color = new_color ^ old_color;
		break;

	case GE_LOGIC_OR:
		new_color = new_color | old_color;
		break;

	case GE_LOGIC_NOR:
		new_color = ~(new_color | old_color);
		break;

	case GE_LOGIC_EQUIV:
		new_color = ~(new_color ^ old_color);
		break;

	case GE_LOGIC_INVERTED:
		new_color = ~old_color;
		break;

	case GE_LOGIC_OR_REVERSE:
		new_color = new_color | ~old_color;
		break;

	case GE_LOGIC_COPY_INVERTED:
		new_color = ~new_color;
		break;

	case GE_LOGIC_OR_INVERTED:
		new_color = ~new_color | old_color;
		break;

	case GE_LOGIC_NAND:
		new_color = ~(new_color & old_color);
		break;

	case GE_LOGIC_SET:
		new_color = 0xFFFFFFFF;
		break;
	}

	return new_color;
}

static inline Vec4<int> GetTextureFunctionOutput(const Vec4<int>& prim_color, const Vec4<int>& texcolor)
{
	Vec3<int> out_rgb;
	int out_a;

	bool rgba = gstate.isTextureAlphaUsed();

	switch (gstate.getTextureFunction()) {
	case GE_TEXFUNC_MODULATE:
	{
#if defined(_M_SSE)
		// We can be accurate up to 24 bit integers, should be enough.
		const __m128 p = _mm_cvtepi32_ps(prim_color.ivec);
		const __m128 t = _mm_cvtepi32_ps(texcolor.ivec);
		out_rgb.ivec = _mm_cvtps_epi32(_mm_div_ps(_mm_mul_ps(p, t), _mm_set_ps1(255.0f)));

		if (rgba) {
			return Vec4<int>(out_rgb.ivec);
		} else {
			out_a = prim_color.a();
		}
#else
		out_rgb = prim_color.rgb() * texcolor.rgb() / 255;
		out_a = (rgba) ? (prim_color.a() * texcolor.a() / 255) : prim_color.a();
#endif
		break;
	}

	case GE_TEXFUNC_DECAL:
	{
		int t = (rgba) ? texcolor.a() : 255;
		int invt = (rgba) ? 255 - t : 0;
		out_rgb = (prim_color.rgb() * invt + texcolor.rgb() * t) / 255;
		out_a = prim_color.a();
		break;
	}

	case GE_TEXFUNC_BLEND:
	{
		const Vec3<int> const255(255, 255, 255);
		const Vec3<int> texenv(gstate.getTextureEnvColR(), gstate.getTextureEnvColG(), gstate.getTextureEnvColB());
		out_rgb = ((const255 - texcolor.rgb()) * prim_color.rgb() + texcolor.rgb() * texenv) / 255;
		out_a = prim_color.a() * ((rgba) ? texcolor.a() : 255) / 255;
		break;
	}

	case GE_TEXFUNC_REPLACE:
		out_rgb = texcolor.rgb();
		out_a = (rgba) ? texcolor.a() : prim_color.a();
		break;

	case GE_TEXFUNC_ADD:
		out_rgb = prim_color.rgb() + texcolor.rgb();
		if (out_rgb.r() > 255) out_rgb.r() = 255;
		if (out_rgb.g() > 255) out_rgb.g() = 255;
		if (out_rgb.b() > 255) out_rgb.b() = 255;
		out_a = prim_color.a() * ((rgba) ? texcolor.a() : 255) / 255;
		break;

	default:
		ERROR_LOG_REPORT(G3D, "Software: Unknown texture function %x", gstate.getTextureFunction());
		out_rgb = Vec3<int>::AssignToAll(0);
		out_a = 0;
	}

	return Vec4<int>(out_rgb.r(), out_rgb.g(), out_rgb.b(), out_a);
}

static inline bool ColorTestPassed(const Vec3<int> &color)
{
	const u32 mask = gstate.getColorTestMask();
	const u32 c = color.ToRGB() & mask;
	const u32 ref = gstate.getColorTestRef() & mask;
	switch (gstate.getColorTestFunction()) {
		case GE_COMP_NEVER:
			return false;

		case GE_COMP_ALWAYS:
			return true;

		case GE_COMP_EQUAL:
			return c == ref;

		case GE_COMP_NOTEQUAL:
			return c != ref;

		default:
			ERROR_LOG_REPORT(G3D, "Software: Invalid colortest function: %d", gstate.getColorTestFunction());
			break;
	}
	return true;
}

static inline bool AlphaTestPassed(int alpha)
{
	const u8 mask = gstate.getAlphaTestMask() & 0xFF;
	const u8 ref = gstate.getAlphaTestRef() & mask;
	alpha &= mask;

	switch (gstate.getAlphaTestFunction()) {
		case GE_COMP_NEVER:
			return false;

		case GE_COMP_ALWAYS:
			return true;

		case GE_COMP_EQUAL:
			return (alpha == ref);

		case GE_COMP_NOTEQUAL:
			return (alpha != ref);

		case GE_COMP_LESS:
			return (alpha < ref);

		case GE_COMP_LEQUAL:
			return (alpha <= ref);

		case GE_COMP_GREATER:
			return (alpha > ref);

		case GE_COMP_GEQUAL:
			return (alpha >= ref);
	}
	return true;
}

static inline Vec3<int> GetSourceFactor(const Vec4<int>& source, const Vec4<int>& dst)
{
	switch (gstate.getBlendFuncA()) {
	case GE_SRCBLEND_DSTCOLOR:
		return dst.rgb();

	case GE_SRCBLEND_INVDSTCOLOR:
		return Vec3<int>::AssignToAll(255) - dst.rgb();

	case GE_SRCBLEND_SRCALPHA:
#if defined(_M_SSE)
		return Vec3<int>(_mm_shuffle_epi32(source.ivec, _MM_SHUFFLE(3, 3, 3, 3)));
#else
		return Vec3<int>::AssignToAll(source.a());
#endif

	case GE_SRCBLEND_INVSRCALPHA:
#if defined(_M_SSE)
		return Vec3<int>(_mm_sub_epi32(_mm_set1_epi32(255), _mm_shuffle_epi32(source.ivec, _MM_SHUFFLE(3, 3, 3, 3))));
#else
		return Vec3<int>::AssignToAll(255 - source.a());
#endif

	case GE_SRCBLEND_DSTALPHA:
		return Vec3<int>::AssignToAll(dst.a());

	case GE_SRCBLEND_INVDSTALPHA:
		return Vec3<int>::AssignToAll(255 - dst.a());

	case GE_SRCBLEND_DOUBLESRCALPHA:
		return Vec3<int>::AssignToAll(2 * source.a());

	case GE_SRCBLEND_DOUBLEINVSRCALPHA:
		return Vec3<int>::AssignToAll(255 - std::min(2 * source.a(), 255));

	case GE_SRCBLEND_DOUBLEDSTALPHA:
		return Vec3<int>::AssignToAll(2 * dst.a());

	case GE_SRCBLEND_DOUBLEINVDSTALPHA:
		return Vec3<int>::AssignToAll(255 - std::min(2 * dst.a(), 255));

	case GE_SRCBLEND_FIXA:
	default:
		// All other dest factors (> 10) are treated as FIXA.
		return Vec3<int>::FromRGB(gstate.getFixA());
	}
}

static inline Vec3<int> GetDestFactor(const Vec4<int>& source, const Vec4<int>& dst)
{
	switch (gstate.getBlendFuncB()) {
	case GE_DSTBLEND_SRCCOLOR:
		return source.rgb();

	case GE_DSTBLEND_INVSRCCOLOR:
		return Vec3<int>::AssignToAll(255) - source.rgb();

	case GE_DSTBLEND_SRCALPHA:
#if defined(_M_SSE)
		return Vec3<int>(_mm_shuffle_epi32(source.ivec, _MM_SHUFFLE(3, 3, 3, 3)));
#else
		return Vec3<int>::AssignToAll(source.a());
#endif

	case GE_DSTBLEND_INVSRCALPHA:
#if defined(_M_SSE)
		return Vec3<int>(_mm_sub_epi32(_mm_set1_epi32(255), _mm_shuffle_epi32(source.ivec, _MM_SHUFFLE(3, 3, 3, 3))));
#else
		return Vec3<int>::AssignToAll(255 - source.a());
#endif

	case GE_DSTBLEND_DSTALPHA:
		return Vec3<int>::AssignToAll(dst.a());

	case GE_DSTBLEND_INVDSTALPHA:
		return Vec3<int>::AssignToAll(255 - dst.a());

	case GE_DSTBLEND_DOUBLESRCALPHA:
		return Vec3<int>::AssignToAll(2 * source.a());

	case GE_DSTBLEND_DOUBLEINVSRCALPHA:
		return Vec3<int>::AssignToAll(255 - std::min(2 * source.a(), 255));

	case GE_DSTBLEND_DOUBLEDSTALPHA:
		return Vec3<int>::AssignToAll(2 * dst.a());

	case GE_DSTBLEND_DOUBLEINVDSTALPHA:
		return Vec3<int>::AssignToAll(255 - std::min(2 * dst.a(), 255));

	case GE_DSTBLEND_FIXB:
	default:
		// All other dest factors (> 10) are treated as FIXB.
		return Vec3<int>::FromRGB(gstate.getFixB());
	}
}

static inline Vec3<int> AlphaBlendingResult(const Vec4<int> &source, const Vec4<int> &dst)
{
	// Note: These factors cannot go below 0, but they can go above 255 when doubling.
	Vec3<int> srcfactor = GetSourceFactor(source, dst);
	Vec3<int> dstfactor = GetDestFactor(source, dst);

	switch (gstate.getBlendEq()) {
	case GE_BLENDMODE_MUL_AND_ADD:
	{
#if defined(_M_SSE)
		const __m128 s = _mm_mul_ps(_mm_cvtepi32_ps(source.ivec), _mm_cvtepi32_ps(srcfactor.ivec));
		const __m128 d = _mm_mul_ps(_mm_cvtepi32_ps(dst.ivec), _mm_cvtepi32_ps(dstfactor.ivec));
		return Vec3<int>(_mm_cvtps_epi32(_mm_mul_ps(_mm_add_ps(s, d), _mm_set_ps1(1.0f / 255.0f))));
#else
		return (source.rgb() * srcfactor + dst.rgb() * dstfactor) / 255;
#endif
	}

	case GE_BLENDMODE_MUL_AND_SUBTRACT:
	{
#if defined(_M_SSE)
		const __m128 s = _mm_mul_ps(_mm_cvtepi32_ps(source.ivec), _mm_cvtepi32_ps(srcfactor.ivec));
		const __m128 d = _mm_mul_ps(_mm_cvtepi32_ps(dst.ivec), _mm_cvtepi32_ps(dstfactor.ivec));
		return Vec3<int>(_mm_cvtps_epi32(_mm_mul_ps(_mm_sub_ps(s, d), _mm_set_ps1(1.0f / 255.0f))));
#else
		return (source.rgb() * srcfactor - dst.rgb() * dstfactor) / 255;
#endif
	}

	case GE_BLENDMODE_MUL_AND_SUBTRACT_REVERSE:
	{
#if defined(_M_SSE)
		const __m128 s = _mm_mul_ps(_mm_cvtepi32_ps(source.ivec), _mm_cvtepi32_ps(srcfactor.ivec));
		const __m128 d = _mm_mul_ps(_mm_cvtepi32_ps(dst.ivec), _mm_cvtepi32_ps(dstfactor.ivec));
		return Vec3<int>(_mm_cvtps_epi32(_mm_mul_ps(_mm_sub_ps(d, s), _mm_set_ps1(1.0f / 255.0f))));
#else
		return (dst.rgb() * dstfactor - source.rgb() * srcfactor) / 255;
#endif
	}

	case GE_BLENDMODE_MIN:
		return Vec3<int>(std::min(source.r(), dst.r()),
						std::min(source.g(), dst.g()),
						std::min(source.b(), dst.b()));

	case GE_BLENDMODE_MAX:
		return Vec3<int>(std::max(source.r(), dst.r()),
						std::max(source.g(), dst.g()),
						std::max(source.b(), dst.b()));

	case GE_BLENDMODE_ABSDIFF:
		return Vec3<int>(::abs(source.r() - dst.r()),
						::abs(source.g() - dst.g()),
						::abs(source.b() - dst.b()));

	default:
		ERROR_LOG_REPORT(G3D, "Software: Unknown blend function %x", gstate.getBlendEq());
		return Vec3<int>();
	}
}

template <bool clearMode>
inline void DrawSinglePixel(const DrawingCoords &p, u16 z, u8 fog, const Vec4<int> &color_in) {
	Vec4<int> prim_color = color_in;
	// Depth range test
	// TODO: Clear mode?
	if (!gstate.isModeThrough())
		if (z < gstate.getDepthRangeMin() || z > gstate.getDepthRangeMax())
			return;

	if (gstate.isColorTestEnabled() && !clearMode)
		if (!ColorTestPassed(prim_color.rgb()))
			return;

	// TODO: Does a need to be clamped?
	if (gstate.isAlphaTestEnabled() && !clearMode)
		if (!AlphaTestPassed(prim_color.a()))
			return;

	// In clear mode, it uses the alpha color as stencil.
	u8 stencil = clearMode ? prim_color.a() : GetPixelStencil(p.x, p.y);
	// TODO: Is it safe to ignore gstate.isDepthTestEnabled() when clear mode is enabled? Probably yes
	if (!clearMode && (gstate.isStencilTestEnabled() || gstate.isDepthTestEnabled())) {
		if (gstate.isStencilTestEnabled() && !StencilTestPassed(stencil)) {
			stencil = ApplyStencilOp(gstate.getStencilOpSFail(), p.x, p.y);
			SetPixelStencil(p.x, p.y, stencil);
			return;
		}

		// Also apply depth at the same time.  If disabled, same as passing.
		if (gstate.isDepthTestEnabled() && !DepthTestPassed(p.x, p.y, z)) {
			if (gstate.isStencilTestEnabled()) {
				stencil = ApplyStencilOp(gstate.getStencilOpZFail(), p.x, p.y);
				SetPixelStencil(p.x, p.y, stencil);
			}
			return;
		} else if (gstate.isStencilTestEnabled()) {
			stencil = ApplyStencilOp(gstate.getStencilOpZPass(), p.x, p.y);
		}

		if (gstate.isDepthTestEnabled() && gstate.isDepthWriteEnabled()) {
			SetPixelDepth(p.x, p.y, z);
		}
	} else if (clearMode && gstate.isClearModeDepthMask()) {
		SetPixelDepth(p.x, p.y, z);
	}

	// Doubling happens only when texturing is enabled, and after tests.
	if (gstate.isTextureMapEnabled() && gstate.isColorDoublingEnabled() && !clearMode) {
		// TODO: Does this need to be clamped before blending?
		prim_color.r() <<= 1;
		prim_color.g() <<= 1;
		prim_color.b() <<= 1;
	}

	if (gstate.isFogEnabled() && !gstate.isModeThrough() && !clearMode) {
		Vec3<int> fogColor = Vec3<int>::FromRGB(gstate.fogcolor);
		fogColor = (prim_color.rgb() * (int)fog + fogColor * (255 - (int)fog)) / 255;
		prim_color.r() = fogColor.r();
		prim_color.g() = fogColor.g();
		prim_color.b() = fogColor.b();
	}

	const u32 old_color = GetPixelColor(p.x, p.y);
	u32 new_color;

	if (gstate.isAlphaBlendEnabled() && !clearMode) {
		const Vec4<int> dst = Vec4<int>::FromRGBA(old_color);
		// ToRGBA() always automatically clamps.
		new_color = AlphaBlendingResult(prim_color, dst).ToRGB();
		new_color |= stencil << 24;
	} else {
#if defined(_M_SSE)
		new_color = Vec3<int>(prim_color.ivec).ToRGB();
		new_color |= stencil << 24;
#else
		new_color = Vec4<int>(prim_color.r(), prim_color.g(), prim_color.b(), stencil).ToRGBA();
#endif
	}

	// TODO: Is alpha blending still performed if logic ops are enabled?
	if (gstate.isLogicOpEnabled() && !clearMode) {
		// Logic ops don't affect stencil.
		new_color = (stencil << 24) | (ApplyLogicOp(gstate.getLogicOp(), old_color, new_color) & 0x00FFFFFF);
	}

	if (clearMode) {
		new_color = (new_color & ~gstate.getClearModeColorMask()) | (old_color & gstate.getClearModeColorMask());
	} else {
		new_color = (new_color & ~gstate.getColorMask()) | (old_color & gstate.getColorMask());
	}

	// TODO: Dither before or inside SetPixelColor
	SetPixelColor(p.x, p.y, new_color);
}

static inline void ApplyTexturing(Sampler::Funcs sampler, Vec4<int> &prim_color, float s, float t, int texlevel, int frac_texlevel, bool bilinear, u8 *texptr[], int texbufw[]) {
	int u[8] = {0}, v[8] = {0};   // 1.23.8 fixed point
	int frac_u[2], frac_v[2];

	Vec4<int> texcolor0;
	Vec4<int> texcolor1;
	const u8 *tptr0 = texptr[texlevel];
	int bufw0 = texbufw[texlevel];
	const u8 *tptr1 = texptr[texlevel + 1];
	int bufw1 = texbufw[texlevel + 1];

	if (!bilinear) {
		// Nearest filtering only.  Round texcoords.
		GetTexelCoordinates(texlevel, s, t, u[0], v[0]);
		if (frac_texlevel) {
			GetTexelCoordinates(texlevel + 1, s, t, u[1], v[1]);
		}

		texcolor0 = Vec4<int>::FromRGBA(sampler.nearest(u[0], v[0], tptr0, bufw0, texlevel));
		if (frac_texlevel) {
			texcolor1 = Vec4<int>::FromRGBA(sampler.nearest(u[1], v[1], tptr1, bufw1, texlevel + 1));
		}
	} else {
		GetTexelCoordinatesQuad(texlevel, s, t, u, v, frac_u[0], frac_v[0]);
		if (frac_texlevel) {
			GetTexelCoordinatesQuad(texlevel + 1, s, t, u + 4, v + 4, frac_u[1], frac_v[1]);
		}

		texcolor0 = Vec4<int>::FromRGBA(sampler.linear(u, v, frac_u[0], frac_v[0], tptr0, bufw0, texlevel));
		if (frac_texlevel) {
			texcolor1 = Vec4<int>::FromRGBA(sampler.linear(u + 4, v + 4, frac_u[1], frac_v[1], tptr1, bufw1, texlevel + 1));
		}
	}

	if (frac_texlevel) {
		texcolor0 = (texcolor1 * frac_texlevel + texcolor0 * (256 - frac_texlevel)) / 256;
	}
	prim_color = GetTextureFunctionOutput(prim_color, texcolor0);
}

// Produces a signed 1.23.8 value.
static int TexLog2(float delta) {
	union FloatBits {
		float f;
		u32 u;
	};
	FloatBits f;
	f.f = delta;
	// Use the exponent as the tex level, and the top mantissa bits for a frac.
	// We can't support more than 8 bits of frac, so truncate.
	int useful = (f.u >> 15) & 0xFFFF;
	// Now offset so the exponent aligns with log2f (exp=127 is 0.)
	return useful - 127 * 256;
}

static inline void CalculateSamplingParams(const float ds, const float dt, const int maxTexLevel, int &level, int &levelFrac, bool &filt) {
	const int width = gstate.getTextureWidth(0);
	const int height = gstate.getTextureHeight(0);

	// With 8 bits of fraction (because texslope can be fairly precise.)
	int detail;
	switch (gstate.getTexLevelMode()) {
	case GE_TEXLEVEL_MODE_AUTO:
		detail = TexLog2(std::max(ds * width, dt * height));
		break;
	case GE_TEXLEVEL_MODE_SLOPE:
		// This is always offset by an extra texlevel.
		detail = 1 * 256 + TexLog2(gstate.getTextureLodSlope());
		break;
	case GE_TEXLEVEL_MODE_CONST:
	default:
		// Unused value 3 operates the same as CONST.
		detail = 0;
		break;
	}

	// Add in the bias (used in all modes), expanding to 8 bits of fraction.
	detail += gstate.getTexLevelOffset16() << 4;

	if (detail > 0 && maxTexLevel > 0) {
		bool mipFilt = gstate.isMipmapFilteringEnabled();

		int level8 = std::min(detail, maxTexLevel * 256);
		if (!mipFilt) {
			// Round up at 1.5.
			level8 += 128;
		}
		level = level8 >> 8;
		levelFrac = mipFilt ? level8 & 0xFF : 0;
	} else {
		level = 0;
		levelFrac = 0;
	}

	if (g_Config.iTexFiltering == 3) {
		filt = true;
	} else if (g_Config.iTexFiltering == 2) {
		filt = false;
	} else {
		filt = detail > 0 ? gstate.isMinifyFilteringEnabled() : gstate.isMagnifyFilteringEnabled();
	}
}

static inline void ApplyTexturing(Sampler::Funcs sampler, Vec4<int> *prim_color, const Vec4<float> &s, const Vec4<float> &t, int maxTexLevel, u8 *texptr[], int texbufw[]) {
	float ds = s[1] - s[0];
	float dt = t[2] - t[0];

	int level;
	int levelFrac;
	bool bilinear;
	CalculateSamplingParams(ds, dt, maxTexLevel, level, levelFrac, bilinear);

	for (int i = 0; i < 4; ++i) {
		ApplyTexturing(sampler, prim_color[i], s[i], t[i], level, levelFrac, bilinear, texptr, texbufw);
	}
}

struct TriangleEdge {
	Vec4<int> Start(const ScreenCoords &v0, const ScreenCoords &v1, const ScreenCoords &origin);
	inline Vec4<int> StepX(const Vec4<int> &w);
	inline Vec4<int> StepY(const Vec4<int> &w);

	Vec4<int> stepX;
	Vec4<int> stepY;
};

Vec4<int> TriangleEdge::Start(const ScreenCoords &v0, const ScreenCoords &v1, const ScreenCoords &origin) {
	// Start at pixel centers.
	Vec4<int> initX = Vec4<int>::AssignToAll(origin.x) + Vec4<int>(7, 23, 7, 23);
	Vec4<int> initY = Vec4<int>::AssignToAll(origin.y) + Vec4<int>(7, 7, 23, 23);

	// orient2d refactored.
	int xf = v0.y - v1.y;
	int yf = v1.x - v0.x;
	int c = v1.y * v0.x - v1.x * v0.y;

	stepX = Vec4<int>::AssignToAll(xf * 16 * 2);
	stepY = Vec4<int>::AssignToAll(yf * 16 * 2);

	return Vec4<int>::AssignToAll(xf) * initX + Vec4<int>::AssignToAll(yf) * initY + Vec4<int>::AssignToAll(c);
}

inline Vec4<int> TriangleEdge::StepX(const Vec4<int> &w) {
#if defined(_M_SSE) && !defined(_M_IX86)
	return _mm_add_epi32(w.ivec, stepX.ivec);
#else
	return w + stepX;
#endif
}

inline Vec4<int> TriangleEdge::StepY(const Vec4<int> &w) {
#if defined(_M_SSE) && !defined(_M_IX86)
	return _mm_add_epi32(w.ivec, stepY.ivec);
#else
	return w + stepY;
#endif
}

static inline Vec4<int> MakeMask(const Vec4<int> &w0, const Vec4<int> &w1, const Vec4<int> &w2, const Vec4<int> &bias0, const Vec4<int> &bias1, const Vec4<int> &bias2, const Vec4<int> &scissor) {
#if defined(_M_SSE) && !defined(_M_IX86)
	__m128i biased0 = _mm_add_epi32(w0.ivec, bias0.ivec);
	__m128i biased1 = _mm_add_epi32(w1.ivec, bias1.ivec);
	__m128i biased2 = _mm_add_epi32(w2.ivec, bias2.ivec);

	return _mm_or_si128(_mm_or_si128(biased0, _mm_or_si128(biased1, biased2)), scissor.ivec);
#else
	return (w0 + bias0) | (w1 + bias1) | (w2 + bias2) | scissor;
#endif
}

static inline bool AnyMask(const Vec4<int> &mask) {
#if defined(_M_SSE) && !defined(_M_IX86)
	// In other words: !(mask.x < 0 && mask.y < 0 && mask.z < 0 && mask.w < 0)
	__m128i low2 = _mm_and_si128(mask.ivec, _mm_shuffle_epi32(mask.ivec, _MM_SHUFFLE(3, 2, 3, 2)));
	__m128i low1 = _mm_and_si128(low2, _mm_shuffle_epi32(low2, _MM_SHUFFLE(1, 1, 1, 1)));
	// Now we only need to check one sign bit.
	return _mm_cvtsi128_si32(low1) >= 0;
#else
	return mask.x >= 0 || mask.y >= 0 || mask.z >= 0 || mask.w >= 0;
#endif
}

static inline Vec4<float> EdgeRecip(const Vec4<int> &w0, const Vec4<int> &w1, const Vec4<int> &w2) {
#if defined(_M_SSE) && !defined(_M_IX86)
	__m128i wsum = _mm_add_epi32(w0.ivec, _mm_add_epi32(w1.ivec, w2.ivec));
	// _mm_rcp_ps loses too much precision.
	return _mm_div_ps(_mm_set1_ps(1.0f), _mm_cvtepi32_ps(wsum));
#else
	return (w0 + w1 + w2).Cast<float>().Reciprocal();
#endif
}

template <bool clearMode>
void DrawTriangleSlice(
	const VertexData& v0, const VertexData& v1, const VertexData& v2,
	int minX, int minY, int maxX, int maxY,
	bool byY, int h1, int h2)
{
	Vec4<int> bias0 = Vec4<int>::AssignToAll(IsRightSideOrFlatBottomLine(v0.screenpos.xy(), v1.screenpos.xy(), v2.screenpos.xy()) ? -1 : 0);
	Vec4<int> bias1 = Vec4<int>::AssignToAll(IsRightSideOrFlatBottomLine(v1.screenpos.xy(), v2.screenpos.xy(), v0.screenpos.xy()) ? -1 : 0);
	Vec4<int> bias2 = Vec4<int>::AssignToAll(IsRightSideOrFlatBottomLine(v2.screenpos.xy(), v0.screenpos.xy(), v1.screenpos.xy()) ? -1 : 0);

	int texbufw[8] = {0};

	int maxTexLevel = gstate.getTextureMaxLevel();
	u8 *texptr[8] = {NULL};

	if (!gstate.isMipmapEnabled()) {
		// No mipmapping enabled
		maxTexLevel = 0;
	}

	if (gstate.isTextureMapEnabled() && !clearMode) {
		GETextureFormat texfmt = gstate.getTextureFormat();
		for (int i = 0; i <= maxTexLevel; i++) {
			u32 texaddr = gstate.getTextureAddress(i);
			texbufw[i] = GetTextureBufw(i, texaddr, texfmt);
			if (Memory::IsValidAddress(texaddr))
				texptr[i] = Memory::GetPointerUnchecked(texaddr);
			else
				texptr[i] = 0;
		}
	}

	TriangleEdge e0;
	TriangleEdge e1;
	TriangleEdge e2;

	if (byY) {
		maxY = std::min(maxY, minY + h2 * 16 * 2);
		minY += h1 * 16 * 2;
	} else {
		maxX = std::min(maxX, minX + h2 * 16 * 2);
		minX += h1 * 16 * 2;
	}

	ScreenCoords pprime(minX, minY, 0);
	Vec4<int> w0_base = e0.Start(v1.screenpos, v2.screenpos, pprime);
	Vec4<int> w1_base = e1.Start(v2.screenpos, v0.screenpos, pprime);
	Vec4<int> w2_base = e2.Start(v0.screenpos, v1.screenpos, pprime);

	// All the z values are the same, no interpolation required.
	// This is common, and when we interpolate, we lose accuracy.
	const bool flatZ = v0.screenpos.z == v1.screenpos.z && v0.screenpos.z == v2.screenpos.z;

	Sampler::Funcs sampler = Sampler::GetFuncs();

	for (pprime.y = minY; pprime.y < maxY; pprime.y += 32,
										w0_base = e0.StepY(w0_base),
										w1_base = e1.StepY(w1_base),
										w2_base = e2.StepY(w2_base)) {
		Vec4<int> w0 = w0_base;
		Vec4<int> w1 = w1_base;
		Vec4<int> w2 = w2_base;

		// TODO: Maybe we can clip the edges instead?
		int scissorYPlus1 = pprime.y + 16 > maxY ? -1 : 0;
		Vec4<int> scissor_mask = Vec4<int>(0, maxX - minX - 1, scissorYPlus1, (maxX - minX - 1) | scissorYPlus1);
		Vec4<int> scissor_step = Vec4<int>(0, -32, 0, -32);

		pprime.x = minX;
		DrawingCoords p = TransformUnit::ScreenToDrawing(pprime);

		for (; pprime.x <= maxX; pprime.x += 32,
			w0 = e0.StepX(w0),
			w1 = e1.StepX(w1),
			w2 = e2.StepX(w2),
			scissor_mask = scissor_mask + scissor_step,
			p.x = (p.x + 2) & 0x3FF) {

			// If p is on or inside all edges, render pixel
			Vec4<int> mask = MakeMask(w0, w1, w2, bias0, bias1, bias2, scissor_mask);
			if (AnyMask(mask)) {
				Vec4<float> wsum_recip = EdgeRecip(w0, w1, w2);

				Vec4<int> prim_color[4];
				Vec3<int> sec_color[4];
				if (gstate.getShadeMode() == GE_SHADE_GOURAUD && !clearMode) {
					// Does the PSP do perspective-correct color interpolation? The GC doesn't.
					for (int i = 0; i < 4; ++i) {
						prim_color[i] = Interpolate(v0.color0, v1.color0, v2.color0, w0[i], w1[i], w2[i], wsum_recip[i]);
						sec_color[i] = Interpolate(v0.color1, v1.color1, v2.color1, w0[i], w1[i], w2[i], wsum_recip[i]);
					}
				} else {
					for (int i = 0; i < 4; ++i) {
						prim_color[i] = v2.color0;
						sec_color[i] = v2.color1;
					}
				}

				if (gstate.isTextureMapEnabled() && !clearMode) {
					Vec4<float> s, t;
					if (gstate.isModeThrough()) {
						s = Interpolate(v0.texturecoords.s(), v1.texturecoords.s(), v2.texturecoords.s(), w0, w1, w2, wsum_recip);
						t = Interpolate(v0.texturecoords.t(), v1.texturecoords.t(), v2.texturecoords.t(), w0, w1, w2, wsum_recip);

						// For levels > 0, mipmapping is always based on level 0.  Simpler to scale first.
						s *= 1.0f / (float)gstate.getTextureWidth(0);
						t *= 1.0f / (float)gstate.getTextureHeight(0);
					} else {
						// Texture coordinate interpolation must definitely be perspective-correct.
						GetTextureCoordinates(v0, v1, v2, w0, w1, w2, wsum_recip, s, t);
					}

					ApplyTexturing(sampler, prim_color, s, t, maxTexLevel, texptr, texbufw);
				}

				if (!clearMode) {
					for (int i = 0; i < 4; ++i) {
#if defined(_M_SSE)
						// TODO: Tried making Vec4 do this, but things got slower.
						const __m128i sec = _mm_and_si128(sec_color[i].ivec, _mm_set_epi32(0, -1, -1, -1));
						prim_color[i].ivec = _mm_add_epi32(prim_color[i].ivec, sec);
#else
						prim_color[i] += Vec4<int>(sec_color[i], 0);
#endif
					}
				}

				Vec4<int> fog = Vec4<int>::AssignToAll(255);
				if (gstate.isFogEnabled() && !clearMode) {
					Vec4<float> fogdepths = w0.Cast<float>() * v0.fogdepth + w1.Cast<float>() * v1.fogdepth + w2.Cast<float>() * v2.fogdepth;
					fogdepths = fogdepths * wsum_recip;
					for (int i = 0; i < 4; ++i) {
						fog[i] = ClampFogDepth(fogdepths[i]);
					}
				}

				Vec4<int> z;
				if (flatZ) {
					z = Vec4<int>::AssignToAll(v2.screenpos.z);
				} else {
					// TODO: Is that the correct way to interpolate?
					Vec4<float> zfloats = w0.Cast<float>() * v0.screenpos.z + w1.Cast<float>() * v1.screenpos.z + w2.Cast<float>() * v2.screenpos.z;
					z = (zfloats * wsum_recip).Cast<int>();
				}

				DrawingCoords subp = p;
				for (int i = 0; i < 4; ++i) {
					if (mask[i] < 0) {
						continue;
					}
					subp.x = p.x + (i & 1);
					subp.y = p.y + (i / 2);

					DrawSinglePixel<clearMode>(subp, (u16)z[i], fog[i], prim_color[i]);
				}
			}
		}
	}
}

// Draws triangle, vertices specified in counter-clockwise direction
void DrawTriangle(const VertexData& v0, const VertexData& v1, const VertexData& v2)
{
	PROFILE_THIS_SCOPE("draw_tri");

	Vec2<int> d01((int)v0.screenpos.x - (int)v1.screenpos.x, (int)v0.screenpos.y - (int)v1.screenpos.y);
	Vec2<int> d02((int)v0.screenpos.x - (int)v2.screenpos.x, (int)v0.screenpos.y - (int)v2.screenpos.y);
	Vec2<int> d12((int)v1.screenpos.x - (int)v2.screenpos.x, (int)v1.screenpos.y - (int)v2.screenpos.y);

	// Drop primitives which are not in CCW order by checking the cross product
	if (d01.x * d02.y - d01.y * d02.x < 0)
		return;

	int minX = std::min(std::min(v0.screenpos.x, v1.screenpos.x), v2.screenpos.x) & ~0xF;
	int minY = std::min(std::min(v0.screenpos.y, v1.screenpos.y), v2.screenpos.y) & ~0xF;
	int maxX = (std::max(std::max(v0.screenpos.x, v1.screenpos.x), v2.screenpos.x) + 0xF) & ~0xF;
	int maxY = (std::max(std::max(v0.screenpos.y, v1.screenpos.y), v2.screenpos.y) + 0xF) & ~0xF;

	DrawingCoords scissorTL(gstate.getScissorX1(), gstate.getScissorY1(), 0);
	DrawingCoords scissorBR(gstate.getScissorX2(), gstate.getScissorY2(), 0);
	minX = std::max(minX, (int)TransformUnit::DrawingToScreen(scissorTL).x);
	maxX = std::min(maxX, (int)TransformUnit::DrawingToScreen(scissorBR).x);
	minY = std::max(minY, (int)TransformUnit::DrawingToScreen(scissorTL).y);
	maxY = std::min(maxY, (int)TransformUnit::DrawingToScreen(scissorBR).y);

	// 32 because we do two pixels at once, and we don't want overlap.
	int rangeY = (maxY - minY) / 32 + 1;
	int rangeX = (maxX - minX) / 32 + 1;
	if (rangeY >= 12 && rangeX >= rangeY * 4) {
		if (gstate.isModeClear()) {
			auto bound = [&](int a, int b) -> void {
				DrawTriangleSlice<true>(v0, v1, v2, minX, minY, maxX, maxY, false, a, b);
			};
			GlobalThreadPool::Loop(bound, 0, rangeX);
		} else {
			auto bound = [&](int a, int b) -> void {
				DrawTriangleSlice<false>(v0, v1, v2, minX, minY, maxX, maxY, false, a, b);
			};
			GlobalThreadPool::Loop(bound, 0, rangeX);
		}
	} else if (rangeY >= 12 && rangeX >= 12) {
		if (gstate.isModeClear()) {
			auto bound = [&](int a, int b) -> void {
				DrawTriangleSlice<true>(v0, v1, v2, minX, minY, maxX, maxY, true, a, b);
			};
			GlobalThreadPool::Loop(bound, 0, rangeY);
		} else {
			auto bound = [&](int a, int b) -> void {
				DrawTriangleSlice<false>(v0, v1, v2, minX, minY, maxX, maxY, true, a, b);
			};
			GlobalThreadPool::Loop(bound, 0, rangeY);
		}
	} else {
		if (gstate.isModeClear()) {
			DrawTriangleSlice<true>(v0, v1, v2, minX, minY, maxX, maxY, true, 0, rangeY);
		} else {
			DrawTriangleSlice<false>(v0, v1, v2, minX, minY, maxX, maxY, true, 0, rangeY);
		}
	}
}

void DrawPoint(const VertexData &v0)
{
	ScreenCoords pos = v0.screenpos;
	Vec4<int> prim_color = v0.color0;
	Vec3<int> sec_color = v0.color1;

	ScreenCoords scissorTL(TransformUnit::DrawingToScreen(DrawingCoords(gstate.getScissorX1(), gstate.getScissorY1(), 0)));
	ScreenCoords scissorBR(TransformUnit::DrawingToScreen(DrawingCoords(gstate.getScissorX2(), gstate.getScissorY2(), 0)));

	if (pos.x < scissorTL.x || pos.y < scissorTL.y || pos.x > scissorBR.x || pos.y > scissorBR.y)
		return;

	bool clearMode = gstate.isModeClear();

	Sampler::Funcs sampler = Sampler::GetFuncs();

	if (gstate.isTextureMapEnabled() && !clearMode) {
		int texbufw[8] = {0};

		int maxTexLevel = gstate.getTextureMaxLevel();
		u8 *texptr[8] = {NULL};

		if (!gstate.isMipmapEnabled()) {
			// No mipmapping enabled
			maxTexLevel = 0;
		}

		if (gstate.isTextureMapEnabled() && !clearMode) {
			GETextureFormat texfmt = gstate.getTextureFormat();
			for (int i = 0; i <= maxTexLevel; i++) {
				u32 texaddr = gstate.getTextureAddress(i);
				texbufw[i] = GetTextureBufw(i, texaddr, texfmt);
				if (Memory::IsValidAddress(texaddr))
					texptr[i] = Memory::GetPointerUnchecked(texaddr);
				else
					texptr[i] = 0;
			}
		}

		float s = v0.texturecoords.s();
		float t = v0.texturecoords.t();
		if (gstate.isModeThrough()) {
			s *= 1.0f / (float)gstate.getTextureWidth(0);
			t *= 1.0f / (float)gstate.getTextureHeight(0);
		} else {
			// Texture coordinate interpolation must definitely be perspective-correct.
			GetTextureCoordinates(v0, v0, 0.0f, s, t);
		}

		int texLevel;
		int texLevelFrac;
		bool bilinear;
		CalculateSamplingParams(0.0f, 0.0f, maxTexLevel, texLevel, texLevelFrac, bilinear);
		ApplyTexturing(sampler, prim_color, s, t, texLevel, texLevelFrac, bilinear, texptr, texbufw);
	}

	if (!clearMode)
		prim_color += Vec4<int>(sec_color, 0);

	ScreenCoords pprime = pos;

	DrawingCoords p = TransformUnit::ScreenToDrawing(pprime);
	u16 z = pos.z;

	u8 fog = 255;
	if (gstate.isFogEnabled() && !clearMode) {
		fog = ClampFogDepth(v0.fogdepth);
	}

	if (clearMode) {
		DrawSinglePixel<true>(p, z, fog, prim_color);
	} else {
		DrawSinglePixel<false>(p, z, fog, prim_color);
	}
}

void DrawLine(const VertexData &v0, const VertexData &v1)
{
	// TODO: Use a proper line drawing algorithm that handles fractional endpoints correctly.
	Vec3<int> a(v0.screenpos.x, v0.screenpos.y, v0.screenpos.z);
	Vec3<int> b(v1.screenpos.x, v1.screenpos.y, v0.screenpos.z);

	int dx = b.x - a.x;
	int dy = b.y - a.y;
	int dz = b.z - a.z;

	int steps;
	if (abs(dx) < abs(dy))
		steps = abs(dy) / 16;
	else
		steps = abs(dx) / 16;

	float xinc = (float)dx / steps;
	float yinc = (float)dy / steps;
	float zinc = (float)dz / steps;

	ScreenCoords scissorTL(TransformUnit::DrawingToScreen(DrawingCoords(gstate.getScissorX1(), gstate.getScissorY1(), 0)));
	ScreenCoords scissorBR(TransformUnit::DrawingToScreen(DrawingCoords(gstate.getScissorX2(), gstate.getScissorY2(), 0)));
	bool clearMode = gstate.isModeClear();

	int texbufw[8] = {0};

	int maxTexLevel = gstate.getTextureMaxLevel();
	u8 *texptr[8] = {NULL};

	if (!gstate.isMipmapEnabled()) {
		// No mipmapping enabled
		maxTexLevel = 0;
	}

	if (gstate.isTextureMapEnabled() && !clearMode) {
		GETextureFormat texfmt = gstate.getTextureFormat();
		for (int i = 0; i <= maxTexLevel; i++) {
			u32 texaddr = gstate.getTextureAddress(i);
			texbufw[i] = GetTextureBufw(i, texaddr, texfmt);
			texptr[i] = Memory::GetPointer(texaddr);
		}
	}

	Sampler::Funcs sampler = Sampler::GetFuncs();

	float x = a.x > b.x ? a.x - 1 : a.x;
	float y = a.y > b.y ? a.y - 1 : a.y;
	float z = a.z;
	const int steps1 = steps == 0 ? 1 : steps;
	for (int i = 0; i < steps; i++) {
		if (x >= scissorTL.x && y >= scissorTL.y && x <= scissorBR.x && y <= scissorBR.y) {
			// Interpolate between the two points.
			Vec4<int> prim_color;
			Vec3<int> sec_color;
			if (gstate.getShadeMode() == GE_SHADE_GOURAUD) {
				prim_color = (v0.color0 * (steps - i) + v1.color0 * i) / steps1;
				sec_color = (v0.color1 * (steps - i) + v1.color1 * i) / steps1;
			} else {
				prim_color = v1.color0;
				sec_color = v1.color1;
			}

			u8 fog = 255;
			if (gstate.isFogEnabled() && !clearMode) {
				fog = ClampFogDepth((v0.fogdepth * (float)(steps - i) + v1.fogdepth * (float)i) / steps1);
			}

			if (gstate.isAntiAliasEnabled()) {
				// TODO: Clearmode?
				// TODO: Calculate.
				prim_color.a() = 0x7F;
			}

			if (gstate.isTextureMapEnabled() && !clearMode) {
				float s, s1;
				float t, t1;
				if (gstate.isModeThrough()) {
					Vec2<float> tc = (v0.texturecoords * (float)(steps - i) + v1.texturecoords * (float)i) / steps1;
					Vec2<float> tc1 = (v0.texturecoords * (float)(steps - i - 1) + v1.texturecoords * (float)(i + 1)) / steps1;

					s = tc.s() * (1.0f / (float)gstate.getTextureWidth(0));
					s1 = tc1.s() * (1.0f / (float)gstate.getTextureWidth(0));
					t = tc.t() * (1.0f / (float)gstate.getTextureHeight(0));
					t1 = tc1.t() * (1.0f / (float)gstate.getTextureHeight(0));
				} else {
					// Texture coordinate interpolation must definitely be perspective-correct.
					GetTextureCoordinates(v0, v1, (float)(steps - i) / steps1, s, t);
					GetTextureCoordinates(v0, v1, (float)(steps - i - 1) / steps1, s1, t1);
				}

				// If inc is 0, force the delta to zero.
				float ds = xinc == 0.0f ? 0.0f : (s1 - s) * 16.0f * (1.0f / xinc);
				float dt = yinc == 0.0f ? 0.0f : (t1 - t) * 16.0f * (1.0f / yinc);

				int texLevel;
				int texLevelFrac;
				bool texBilinear;
				CalculateSamplingParams(ds, dt, maxTexLevel, texLevel, texLevelFrac, texBilinear);

				if (gstate.isAntiAliasEnabled()) {
					// TODO: This is a niave and wrong implementation.
					DrawingCoords p0 = TransformUnit::ScreenToDrawing(ScreenCoords((int)x, (int)y, (int)z));
					DrawingCoords p1 = TransformUnit::ScreenToDrawing(ScreenCoords((int)(x + xinc), (int)(y + yinc), (int)(z + zinc)));
					s = ((float)p0.x + xinc / 32.0f) / 512.0f;
					t = ((float)p0.y + yinc / 32.0f) / 512.0f;

					texBilinear = true;
				}

				ApplyTexturing(sampler, prim_color, s, t, texLevel, texLevelFrac, texBilinear, texptr, texbufw);
			}

			if (!clearMode)
				prim_color += Vec4<int>(sec_color, 0);

			ScreenCoords pprime = ScreenCoords((int)x, (int)y, (int)z);

			DrawingCoords p = TransformUnit::ScreenToDrawing(pprime);
			if (clearMode) {
				DrawSinglePixel<true>(p, z, fog, prim_color);
			} else {
				DrawSinglePixel<false>(p, z, fog, prim_color);
			}
		}

		x += xinc;
		y += yinc;
		z += zinc;
	}
}

bool GetCurrentStencilbuffer(GPUDebugBuffer &buffer)
{
	int w = gstate.getRegionX2() - gstate.getRegionX1() + 1;
	int h = gstate.getRegionY2() - gstate.getRegionY1() + 1;
	buffer.Allocate(w, h, GPU_DBG_FORMAT_8BIT);

	u8 *row = buffer.GetData();
	for (int y = gstate.getRegionY1(); y <= gstate.getRegionY2(); ++y) {
		for (int x = gstate.getRegionX1(); x <= gstate.getRegionX2(); ++x) {
			row[x - gstate.getRegionX1()] = GetPixelStencil(x, y);
		}
		row += w;
	}
	return true;
}

bool GetCurrentTexture(GPUDebugBuffer &buffer, int level)
{
	if (!gstate.isTextureMapEnabled()) {
		return false;
	}

	int w = gstate.getTextureWidth(level);
	int h = gstate.getTextureHeight(level);
	buffer.Allocate(w, h, GE_FORMAT_8888, false);

	GETextureFormat texfmt = gstate.getTextureFormat();
	u32 texaddr = gstate.getTextureAddress(level);
	int texbufw = GetTextureBufw(level, texaddr, texfmt);
	u8 *texptr = Memory::GetPointer(texaddr);

	Sampler::Funcs sampler = Sampler::GetFuncs();

	u32 *row = (u32 *)buffer.GetData();
	for (int y = 0; y < h; ++y) {
		for (int x = 0; x < w; ++x) {
			row[x] = sampler.nearest(x, y, texptr, texbufw, level);
		}
		row += w;
	}
	return true;
}

} // namespace