Full rebrand

This commit is contained in:
JuanCStar 2024-03-08 09:06:48 +00:00 committed by Crimson Hawk
parent c445fa1e3e
commit 88b901a24e
427 changed files with 55946 additions and 56077 deletions

View File

@ -9,7 +9,7 @@ ccache -s
BUILD_FLAVOR="mainline"
BUILD_TYPE="release"
if [ "${GITHUB_REPOSITORY}" == "yuzu-emu/yuzu" ]; then
if [ "${GITHUB_REPOSITORY}" == "suyu-emu/suyu" ]; then
BUILD_TYPE="relWithDebInfo"
fi

View File

@ -5,13 +5,13 @@
. ./.ci/scripts/common/pre-upload.sh
REV_NAME="yuzu-${GITDATE}-${GITREV}"
REV_NAME="suyu-${GITDATE}-${GITREV}"
BUILD_FLAVOR="mainline"
BUILD_TYPE_LOWER="release"
BUILD_TYPE_UPPER="Release"
if [ "${GITHUB_REPOSITORY}" == "yuzu-emu/yuzu" ]; then
if [ "${GITHUB_REPOSITORY}" == "suyu-emu/suyu" ]; then
BUILD_TYPE_LOWER="relWithDebInfo"
BUILD_TYPE_UPPER="RelWithDebInfo"
fi

View File

@ -19,9 +19,9 @@ cmake .. \
-DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON \
-DENABLE_QT_TRANSLATION=ON \
-DUSE_DISCORD_PRESENCE=ON \
-DYUZU_CRASH_DUMPS=ON \
-DYUZU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} \
-DYUZU_USE_BUNDLED_FFMPEG=ON \
-DSUYU_CRASH_DUMPS=ON \
-DSUYU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} \
-DSUYU_USE_BUNDLED_FFMPEG=ON \
-GNinja
ninja

View File

@ -5,7 +5,7 @@
mkdir -p "ccache" || true
chmod a+x ./.ci/scripts/clang/docker.sh
# the UID for the container yuzu user is 1027
# the UID for the container suyu user is 1027
sudo chown -R 1027 ./
docker run -e ENABLE_COMPATIBILITY_REPORTING -e CCACHE_DIR=/yuzu/ccache -v "$(pwd):/yuzu" -w /yuzu yuzuemu/build-environments:linux-fresh /bin/bash /yuzu/.ci/scripts/clang/docker.sh "$1"
docker run -e ENABLE_COMPATIBILITY_REPORTING -e CCACHE_DIR=/suyu/ccache -v "$(pwd):/suyu" -w /suyu suyuemu/build-environments:linux-fresh /bin/bash /suyu/.ci/scripts/clang/docker.sh "$1"
sudo chown -R $UID ./

View File

@ -1,11 +1,11 @@
#!/bin/bash -ex
# SPDX-FileCopyrightText: 2021 yuzu Emulator Project
# SPDX-FileCopyrightText: 2021 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
. .ci/scripts/common/pre-upload.sh
REV_NAME="yuzu-linux-${GITDATE}-${GITREV}"
REV_NAME="suyu-linux-${GITDATE}-${GITREV}"
ARCHIVE_NAME="${REV_NAME}.tar.xz"
COMPRESSION_FLAGS="-cJvf"
@ -17,7 +17,7 @@ fi
mkdir "$DIR_NAME"
cp build/bin/yuzu-cmd "$DIR_NAME"
cp build/bin/yuzu "$DIR_NAME"
cp build/bin/suyu-cmd "$DIR_NAME"
cp build/bin/suyu "$DIR_NAME"
. .ci/scripts/common/post-upload.sh

View File

@ -4,6 +4,6 @@
# SPDX-License-Identifier: GPL-2.0-or-later
# Run clang-format
cd /yuzu
cd /suyu
chmod a+x ./.ci/scripts/format/script.sh
./.ci/scripts/format/script.sh

View File

@ -4,7 +4,7 @@
# SPDX-License-Identifier: GPL-2.0-or-later
chmod a+x ./.ci/scripts/format/docker.sh
# the UID for the container yuzu user is 1027
# the UID for the container suyu user is 1027
sudo chown -R 1027 ./
docker run -v "$(pwd):/yuzu" -w /yuzu yuzuemu/build-environments:linux-clang-format /bin/bash -ex /yuzu/.ci/scripts/format/docker.sh
docker run -v "$(pwd):/suyu" -w /suyu suyuemu/build-environments:linux-clang-format /bin/bash -ex /suyu/.ci/scripts/format/docker.sh
sudo chown -R $UID ./

View File

@ -1,6 +1,6 @@
#!/bin/bash -ex
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
# Exit on error, rather than continuing with the rest of the script.
@ -20,10 +20,10 @@ cmake .. \
-DENABLE_COMPATIBILITY_LIST_DOWNLOAD=OFF \
-DENABLE_QT_TRANSLATION=OFF \
-DUSE_DISCORD_PRESENCE=ON \
-DYUZU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} \
-DYUZU_USE_BUNDLED_FFMPEG=ON \
-DYUZU_ENABLE_LTO=ON \
-DYUZU_CRASH_DUMPS=ON \
-DSUYU_ENABLE_COMPATIBILITY_REPORTING=${ENABLE_COMPATIBILITY_REPORTING:-"OFF"} \
-DSUYU_USE_BUNDLED_FFMPEG=ON \
-DSUYU_ENABLE_LTO=ON \
-DSUYU_CRASH_DUMPS=ON \
-GNinja
ninja
@ -33,7 +33,7 @@ ccache -s
ctest -VV -C Release
# Separate debug symbols from specified executables
for EXE in yuzu; do
for EXE in suyu; do
EXE_PATH="bin/$EXE"
# Copy debug symbols out
objcopy --only-keep-debug $EXE_PATH $EXE_PATH.debug
@ -46,7 +46,7 @@ done
find bin/ -type f -not -regex '.*.debug' -exec strip -g {} ';'
DESTDIR="$PWD/AppDir" ninja install
rm -vf AppDir/usr/bin/yuzu-cmd AppDir/usr/bin/yuzu-tester
rm -vf AppDir/usr/bin/suyu-cmd AppDir/usr/bin/suyu-tester
# Download tools needed to build an AppImage
wget -nc https://gitlab.com/suyu-emu/ext-linux-bin/-/raw/main/appimage/deploy-linux.sh
@ -66,13 +66,13 @@ mkdir -p AppDir/usr/optional
mkdir -p AppDir/usr/optional/libstdc++
mkdir -p AppDir/usr/optional/libgcc_s
# Deploy yuzu's needed dependencies
DEPLOY_QT=1 ./deploy-linux.sh AppDir/usr/bin/yuzu AppDir
# Deploy suyu's needed dependencies
DEPLOY_QT=1 ./deploy-linux.sh AppDir/usr/bin/suyu AppDir
# Workaround for libQt5MultimediaGstTools indirectly requiring libwayland-client and breaking Vulkan usage on end-user systems
find AppDir -type f -regex '.*libwayland-client\.so.*' -delete -print
# Workaround for building yuzu with GCC 10 but also trying to distribute it to Ubuntu 18.04 et al.
# Workaround for building suyu with GCC 10 but also trying to distribute it to Ubuntu 18.04 et al.
# See https://github.com/darealshinji/AppImageKit-checkrt
cp exec-x86_64.so AppDir/usr/optional/exec.so
cp AppRun.sh AppDir/AppRun

View File

@ -5,12 +5,12 @@
mkdir -p "ccache" || true
chmod a+x ./.ci/scripts/linux/docker.sh
# the UID for the container yuzu user is 1027
# the UID for the container suyu user is 1027
sudo chown -R 1027 ./
# The environment variables listed below:
# AZURECIREPO TITLEBARFORMATIDLE TITLEBARFORMATRUNNING DISPLAYVERSION
# are requested in src/common/CMakeLists.txt and appear to be provided somewhere in Azure DevOps
docker run -e AZURECIREPO -e TITLEBARFORMATIDLE -e TITLEBARFORMATRUNNING -e DISPLAYVERSION -e ENABLE_COMPATIBILITY_REPORTING -e CCACHE_DIR=/yuzu/ccache -v "$(pwd):/yuzu" -w /yuzu yuzuemu/build-environments:linux-fresh /bin/bash /yuzu/.ci/scripts/linux/docker.sh "$1"
docker run -e AZURECIREPO -e TITLEBARFORMATIDLE -e TITLEBARFORMATRUNNING -e DISPLAYVERSION -e ENABLE_COMPATIBILITY_REPORTING -e CCACHE_DIR=/suyu/ccache -v "$(pwd):/suyu" -w /suyu suyuemu/build-environments:linux-fresh /bin/bash /suyu/.ci/scripts/linux/docker.sh "$1"
sudo chown -R $UID ./

View File

@ -1,12 +1,12 @@
#!/bin/bash -ex
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
. .ci/scripts/common/pre-upload.sh
APPIMAGE_NAME="yuzu-${RELEASE_NAME}-${GITDATE}-${GITREV}.AppImage"
BASE_NAME="yuzu-linux"
APPIMAGE_NAME="suyu-${RELEASE_NAME}-${GITDATE}-${GITREV}.AppImage"
BASE_NAME="suyu-linux"
REV_NAME="${BASE_NAME}-${GITDATE}-${GITREV}"
ARCHIVE_NAME="${REV_NAME}.tar.xz"
COMPRESSION_FLAGS="-cJvf"
@ -19,9 +19,9 @@ fi
mkdir "$DIR_NAME"
cp build/bin/yuzu-cmd "$DIR_NAME"
cp build/bin/suyu-cmd "$DIR_NAME"
if [ "${RELEASE_NAME}" != "early-access" ] && [ "${RELEASE_NAME}" != "mainline" ]; then
cp build/bin/yuzu "$DIR_NAME"
cp build/bin/suyu "$DIR_NAME"
fi
# Build an AppImage
@ -42,7 +42,7 @@ fi
if [ "${RELEASE_NAME}" = "mainline" ]; then
# Generate update information if releasing to mainline
./appimagetool-x86_64.AppImage -u "gh-releases-zsync|yuzu-emu|yuzu-${RELEASE_NAME}|latest|yuzu-*.AppImage.zsync" AppDir "${APPIMAGE_NAME}"
./appimagetool-x86_64.AppImage -u "gh-releases-zsync|suyu-emu|suyu-${RELEASE_NAME}|latest|suyu-*.AppImage.zsync" AppDir "${APPIMAGE_NAME}"
else
./appimagetool-x86_64.AppImage AppDir "${APPIMAGE_NAME}"
fi
@ -56,7 +56,7 @@ fi
# Copy the AppImage to the general release directory and remove git revision info
if [ "${RELEASE_NAME}" = "mainline" ] || [ "${RELEASE_NAME}" = "early-access" ]; then
cp "build/${APPIMAGE_NAME}" "${DIR_NAME}/yuzu-${RELEASE_NAME}.AppImage"
cp "build/${APPIMAGE_NAME}" "${DIR_NAME}/suyu-${RELEASE_NAME}.AppImage"
fi
# Copy debug symbols to artifacts

View File

@ -6,8 +6,8 @@
import requests, sys, json, shutil, subprocess, os, traceback
org = os.getenv("PRIVATEMERGEORG", "yuzu-emu")
repo = os.getenv("PRIVATEMERGEREPO", "yuzu-private")
org = os.getenv("PRIVATEMERGEORG", "suyu-emu")
repo = os.getenv("PRIVATEMERGEREPO", "suyu-private")
tagline = sys.argv[3]
user = sys.argv[1]

View File

@ -15,7 +15,7 @@ def check_individual(labels):
return False
def do_page(page):
url = f"https://api.github.com/repos/yuzu-emu/yuzu/pulls?page={page}"
url = f"https://gitlab.com/suyu-emu/suyu/-/merge_requests?page={page}"
response = requests.get(url)
response.raise_for_status()
if (response.ok):
@ -26,7 +26,7 @@ def do_page(page):
if (check_individual(pr["labels"])):
pn = pr["number"]
print(f"Matched PR# {pn}")
print(subprocess.check_output(["git", "fetch", "https://github.com/yuzu-emu/yuzu.git", f"pull/{pn}/head:pr-{pn}", "-f", "--no-recurse-submodules"]))
print(subprocess.check_output(["git", "fetch", "https://gitlab.com/suyu-emu/suyu.git", f"pull/{pn}/head:pr-{pn}", "-f", "--no-recurse-submodules"]))
print(subprocess.check_output(["git", "merge", "--squash", f"pr-{pn}"]))
print(subprocess.check_output(["git", "commit", f"-m\"Merge {tagline} PR {pn}\""]))

View File

@ -7,7 +7,7 @@
import requests, json, sys
try:
url = 'https://api.github.com/repos/yuzu-emu/yuzu/issues/%s' % sys.argv[1]
url = 'https://gitlab.com/suyu-emu/suyu/-/issues/%s' % sys.argv[1]
response = requests.get(url)
if (response.ok):
j = json.loads(response.content)

View File

@ -1,5 +1,5 @@
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
git config --global user.email "yuzu@yuzu-emu.org"
git config --global user.name "yuzubot"
git config --global user.email "suyu@suyu.dev"
git config --global user.name "suyubot"

View File

@ -11,7 +11,7 @@ gcc -v
tx --version
mkdir build && cd build
cmake .. -DENABLE_QT_TRANSLATION=ON -DGENERATE_QT_TRANSLATION=ON -DCMAKE_BUILD_TYPE=Release -DENABLE_SDL2=OFF -DYUZU_TESTS=OFF -DYUZU_USE_BUNDLED_VCPKG=ON
cmake .. -DENABLE_QT_TRANSLATION=ON -DGENERATE_QT_TRANSLATION=ON -DCMAKE_BUILD_TYPE=Release -DENABLE_SDL2=OFF -DSUYU_TESTS=OFF -DSUYU_USE_BUNDLED_VCPKG=ON
make translation
cd ..

View File

@ -1,11 +1,11 @@
#!/bin/bash -ex
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
set -e
#cd /yuzu
#cd /suyu
ccache -sv
@ -17,11 +17,11 @@ cmake .. \
-DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON \
-DENABLE_QT_TRANSLATION=ON \
-DUSE_CCACHE=ON \
-DYUZU_USE_BUNDLED_SDL2=OFF \
-DYUZU_USE_EXTERNAL_SDL2=OFF \
-DYUZU_TESTS=OFF \
-DSUYU_USE_BUNDLED_SDL2=OFF \
-DSUYU_USE_EXTERNAL_SDL2=OFF \
-DSUYU_TESTS=OFF \
-GNinja
ninja yuzu yuzu-cmd
ninja suyu suyu-cmd
ccache -sv
@ -39,7 +39,7 @@ else
QT_PLUGINS_PATH='/usr/x86_64-w64-mingw32/lib/qt/plugins'
fi
find build/ -name "yuzu*.exe" -exec cp {} 'package' \;
find build/ -name "suyu*.exe" -exec cp {} 'package' \;
# copy Qt plugins
mkdir package/platforms
@ -62,5 +62,5 @@ EXTERNALS_PATH="$(pwd)/build/externals"
FFMPEG_DLL_PATH="$(find "${EXTERNALS_PATH}" -maxdepth 1 -type d | grep 'ffmpeg-')/bin"
find ${FFMPEG_DLL_PATH} -type f -regex ".*\.dll" -exec cp -nv {} package/ ';'
# copy libraries from yuzu.exe path
# copy libraries from suyu.exe path
find "$(pwd)/build/bin/" -type f -regex ".*\.dll" -exec cp -v {} package/ ';'

View File

@ -5,7 +5,7 @@
mkdir -p "ccache" || true
chmod a+x ./.ci/scripts/windows/docker.sh
# the UID for the container yuzu user is 1027
# the UID for the container suyu user is 1027
sudo chown -R 1027 ./
docker run -e CCACHE_DIR=/yuzu/ccache -v "$(pwd):/yuzu" -w /yuzu yuzuemu/build-environments:linux-mingw /bin/bash -ex /yuzu/.ci/scripts/windows/docker.sh "$1"
docker run -e CCACHE_DIR=/suyu/ccache -v "$(pwd):/suyu" -w /suyu suyuemu/build-environments:linux-mingw /bin/bash -ex /suyu/.ci/scripts/windows/docker.sh "$1"
sudo chown -R $UID ./

View File

@ -7,18 +7,18 @@ $GITDATE = $(git show -s --date=short --format='%ad') -replace "-", ""
$GITREV = $(git show -s --format='%h')
if ("$BUILD_NAME" -eq "mainline") {
$RELEASE_DIST = "yuzu-windows-msvc"
$RELEASE_DIST = "suyu-windows-msvc"
}
else {
$RELEASE_DIST = "yuzu-windows-msvc-$BUILD_NAME"
$RELEASE_DIST = "suyu-windows-msvc-$BUILD_NAME"
}
$MSVC_BUILD_ZIP = "yuzu-windows-msvc-$GITDATE-$GITREV.zip" -replace " ", ""
$MSVC_BUILD_PDB = "yuzu-windows-msvc-$GITDATE-$GITREV-debugsymbols.zip" -replace " ", ""
$MSVC_SEVENZIP = "yuzu-windows-msvc-$GITDATE-$GITREV.7z" -replace " ", ""
$MSVC_TAR = "yuzu-windows-msvc-$GITDATE-$GITREV.tar" -replace " ", ""
$MSVC_TARXZ = "yuzu-windows-msvc-$GITDATE-$GITREV.tar.xz" -replace " ", ""
$MSVC_SOURCE = "yuzu-windows-msvc-source-$GITDATE-$GITREV" -replace " ", ""
$MSVC_BUILD_ZIP = "suyu-windows-msvc-$GITDATE-$GITREV.zip" -replace " ", ""
$MSVC_BUILD_PDB = "suyu-windows-msvc-$GITDATE-$GITREV-debugsymbols.zip" -replace " ", ""
$MSVC_SEVENZIP = "suyu-windows-msvc-$GITDATE-$GITREV.7z" -replace " ", ""
$MSVC_TAR = "suyu-windows-msvc-$GITDATE-$GITREV.tar" -replace " ", ""
$MSVC_TARXZ = "suyu-windows-msvc-$GITDATE-$GITREV.tar.xz" -replace " ", ""
$MSVC_SOURCE = "suyu-windows-msvc-source-$GITDATE-$GITREV" -replace " ", ""
$MSVC_SOURCE_TAR = "$MSVC_SOURCE.tar"
$MSVC_SOURCE_TARXZ = "$MSVC_SOURCE_TAR.xz"
@ -62,7 +62,7 @@ if ("$env:GITHUB_ACTIONS" -eq "true") {
cp .\build\bin\*.dll .\artifacts\
# Hopefully there is an exe in either .\build\bin or .\build\bin\Release
cp .\build\bin\yuzu*.exe .\artifacts\
cp .\build\bin\suyu*.exe .\artifacts\
Copy-Item "$BUILD_DIR\*" -Destination "artifacts" -Recurse
Remove-Item .\artifacts\tests.exe -ErrorAction ignore
@ -70,7 +70,7 @@ if ("$env:GITHUB_ACTIONS" -eq "true") {
#Copy-Item $MSVC_SOURCE_TARXZ -Destination "artifacts"
# Debugging symbols
cp .\build\bin\yuzu*.pdb .\artifacts\
cp .\build\bin\suyu*.pdb .\artifacts\
# Write out a tag BUILD_TAG to environment for the Upload step
# We're getting ${{ github.event.number }} as $env:PR_NUMBER"
@ -91,11 +91,11 @@ if ("$env:GITHUB_ACTIONS" -eq "true") {
echo "BUILD_TAG=$BUILD_TAG" >> $env:GITHUB_ENV
# For extra job, just the exe
$INDIVIDUAL_EXE = "yuzu-msvc-$BUILD_TAG.exe"
$INDIVIDUAL_EXE = "suyu-msvc-$BUILD_TAG.exe"
echo "INDIVIDUAL_EXE=$INDIVIDUAL_EXE"
echo "INDIVIDUAL_EXE=$INDIVIDUAL_EXE" >> $env:GITHUB_ENV
echo "Just the exe: $INDIVIDUAL_EXE"
cp .\artifacts\yuzu.exe .\$INDIVIDUAL_EXE
cp .\artifacts\suyu.exe .\$INDIVIDUAL_EXE
} else {
@ -104,7 +104,7 @@ if ("$env:GITHUB_ACTIONS" -eq "true") {
Copy-Item $MSVC_SOURCE_TARXZ -Destination $RELEASE_DIST
Copy-Item "$BUILD_DIR\*" -Destination $RELEASE_DIST -Recurse
rm "$RELEASE_DIST\*.exe"
Get-ChildItem "$BUILD_DIR" -Recurse -Filter "yuzu*.exe" | Copy-Item -destination $RELEASE_DIST
Get-ChildItem "$BUILD_DIR" -Recurse -Filter "suyu*.exe" | Copy-Item -destination $RELEASE_DIST
Get-ChildItem "$BUILD_DIR" -Recurse -Filter "QtWebEngineProcess*.exe" | Copy-Item -destination $RELEASE_DIST
7z a -tzip $MSVC_BUILD_ZIP $RELEASE_DIST\*
7z a $MSVC_SEVENZIP $RELEASE_DIST

View File

@ -5,7 +5,7 @@
. .ci/scripts/common/pre-upload.sh
REV_NAME="yuzu-windows-mingw-${GITDATE}-${GITREV}"
REV_NAME="suyu-windows-mingw-${GITDATE}-${GITREV}"
ARCHIVE_NAME="${REV_NAME}.tar.xz"
COMPRESSION_FLAGS="-cJvf"

View File

@ -4,5 +4,5 @@
steps:
- script: mkdir artifacts || echo 'X' > artifacts/T1.txt
- publish: artifacts
artifact: 'yuzu-$(BuildName)-mock'
artifact: 'suyu-$(BuildName)-mock'
displayName: 'Upload Artifacts'

View File

@ -12,12 +12,12 @@ steps:
inputs:
targetType: 'filePath'
filePath: './.ci/scripts/windows/install-vulkan-sdk.ps1'
- script: refreshenv && glslangValidator --version && mkdir build && cd build && cmake -E env CXXFLAGS="/Gw" cmake -G "Visual Studio 17 2022" -A x64 -DCMAKE_POLICY_DEFAULT_CMP0069=NEW -DYUZU_ENABLE_LTO=ON -DYUZU_USE_BUNDLED_QT=1 -DYUZU_USE_BUNDLED_SDL2=1 -DYUZU_USE_QT_WEB_ENGINE=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DYUZU_ENABLE_COMPATIBILITY_REPORTING=${COMPAT} -DYUZU_TESTS=OFF -DUSE_DISCORD_PRESENCE=ON -DENABLE_QT_TRANSLATION=ON -DDISPLAY_VERSION=${{ parameters['version'] }} -DCMAKE_BUILD_TYPE=Release -DYUZU_CRASH_DUMPS=ON .. && cd ..
- script: refreshenv && glslangValidator --version && mkdir build && cd build && cmake -E env CXXFLAGS="/Gw" cmake -G "Visual Studio 17 2022" -A x64 -DCMAKE_POLICY_DEFAULT_CMP0069=NEW -DSUYU_ENABLE_LTO=ON -DSUYU_USE_BUNDLED_QT=1 -DSUYU_USE_BUNDLED_SDL2=1 -DSUYU_USE_QT_WEB_ENGINE=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DSUYU_ENABLE_COMPATIBILITY_REPORTING=${COMPAT} -DSUYU_TESTS=OFF -DUSE_DISCORD_PRESENCE=ON -DENABLE_QT_TRANSLATION=ON -DDISPLAY_VERSION=${{ parameters['version'] }} -DCMAKE_BUILD_TYPE=Release -DSUYU_CRASH_DUMPS=ON .. && cd ..
displayName: 'Configure CMake'
- task: MSBuild@1
displayName: 'Build'
inputs:
solution: 'build/yuzu.sln'
solution: 'build/suyu.sln'
maximumCpuCount: true
configuration: release
- task: PowerShell@2
@ -27,5 +27,5 @@ steps:
filePath: './.ci/scripts/windows/upload.ps1'
arguments: '$(BuildName)'
- publish: artifacts
artifact: 'yuzu-$(BuildName)-windows-msvc'
artifact: 'suyu-$(BuildName)-windows-msvc'
displayName: 'Upload Artifacts'

View File

@ -14,7 +14,7 @@ steps:
- task: CacheBeta@0
displayName: 'Cache Build System'
inputs:
key: yuzu-v1-$(BuildName)-$(BuildSuffix)-$(CacheSuffix)
key: suyu-v1-$(BuildName)-$(BuildSuffix)-$(CacheSuffix)
path: $(System.DefaultWorkingDirectory)/ccache
cacheHitVar: CACHE_RESTORED
- script: chmod a+x ./.ci/scripts/$(ScriptFolder)/exec.sh && ./.ci/scripts/$(ScriptFolder)/exec.sh ${{ parameters['version'] }}
@ -22,5 +22,5 @@ steps:
- script: chmod a+x ./.ci/scripts/$(ScriptFolder)/upload.sh && RELEASE_NAME=$(BuildName) ./.ci/scripts/$(ScriptFolder)/upload.sh
displayName: 'Package Artifacts'
- publish: artifacts
artifact: 'yuzu-$(BuildName)-$(BuildSuffix)'
artifact: 'suyu-$(BuildName)-$(BuildSuffix)'
displayName: 'Upload Artifacts'

View File

@ -19,12 +19,12 @@ jobs:
rootFolderOrFile: '$(System.DefaultWorkingDirectory)'
includeRootFolder: false
archiveType: '7z'
archiveFile: '$(Build.ArtifactStagingDirectory)/yuzu-$(BuildName)-source.7z'
archiveFile: '$(Build.ArtifactStagingDirectory)/suyu-$(BuildName)-source.7z'
- task: PublishPipelineArtifact@1
displayName: 'Upload Artifacts'
inputs:
targetPath: '$(Build.ArtifactStagingDirectory)/yuzu-$(BuildName)-source.7z'
artifact: 'yuzu-$(BuildName)-source'
targetPath: '$(Build.ArtifactStagingDirectory)/suyu-$(BuildName)-source.7z'
artifact: 'suyu-$(BuildName)-source'
replaceExistingArchive: true
- job: upload_source
displayName: 'upload'
@ -36,7 +36,7 @@ jobs:
parameters:
artifactSource: 'true'
needSubmodules: 'true'
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh
displayName: 'Apply Git Configuration'
- script: git remote add other $(GitRepoPushChangesURL)
displayName: 'Register Repository'

View File

@ -18,12 +18,12 @@ jobs:
rootFolderOrFile: '$(System.DefaultWorkingDirectory)'
includeRootFolder: false
archiveType: '7z'
archiveFile: '$(Build.ArtifactStagingDirectory)/yuzu-$(BuildName)-source.7z'
archiveFile: '$(Build.ArtifactStagingDirectory)/suyu-$(BuildName)-source.7z'
- task: PublishPipelineArtifact@1
displayName: 'Upload Artifacts'
inputs:
targetPath: '$(Build.ArtifactStagingDirectory)/yuzu-$(BuildName)-source.7z'
artifact: 'yuzu-$(BuildName)-source'
targetPath: '$(Build.ArtifactStagingDirectory)/suyu-$(BuildName)-source.7z'
artifact: 'suyu-$(BuildName)-source'
replaceExistingArchive: true
- job: upload_source
displayName: 'upload'
@ -35,7 +35,7 @@ jobs:
parameters:
artifactSource: 'true'
needSubmodules: 'true'
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh
displayName: 'Apply Git Configuration'
- script: git remote add other $(GitRepoPushChangesURL)
displayName: 'Register Repository'

View File

@ -8,7 +8,7 @@ parameters:
steps:
- script: mkdir $(System.DefaultWorkingDirectory)/patches && pip install requests urllib3
displayName: 'Prepare Environment'
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh
displayName: 'Apply Git Configuration'
- task: PythonScript@0
displayName: 'Discover, Download, and Apply Patches (Mainline)'

View File

@ -7,7 +7,7 @@ parameters:
steps:
- script: mkdir $(System.DefaultWorkingDirectory)/patches && pip install requests urllib3
displayName: 'Prepare Environment'
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh
displayName: 'Apply Git Configuration'
- task: PythonScript@0
displayName: 'Discover, Download, and Apply Patches'

View File

@ -5,12 +5,12 @@ steps:
- task: DownloadPipelineArtifact@2
displayName: 'Download Windows Release'
inputs:
artifactName: 'yuzu-$(BuildName)-windows-msvc'
artifactName: 'suyu-$(BuildName)-windows-msvc'
buildType: 'current'
targetPath: '$(Build.ArtifactStagingDirectory)'
- task: DownloadPipelineArtifact@2
displayName: 'Download Linux Release'
inputs:
artifactName: 'yuzu-$(BuildName)-linux'
artifactName: 'suyu-$(BuildName)-linux'
buildType: 'current'
targetPath: '$(Build.ArtifactStagingDirectory)'

View File

@ -2,9 +2,9 @@
# SPDX-License-Identifier: GPL-2.0-or-later
steps:
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/yuzubot-git-config.sh
- script: chmod a+x $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh && $(System.DefaultWorkingDirectory)/.ci/scripts/merge/suyubot-git-config.sh
displayName: 'Apply Git Configuration'
- script: git tag -a $(BuildName)-$(DisplayPrefix)-$(DisplayVersion) -m "yuzu $(BuildName) $(Build.BuildNumber) $(Build.DefinitionName) $(DisplayPrefix)-$(DisplayVersion)"
- script: git tag -a $(BuildName)-$(DisplayPrefix)-$(DisplayVersion) -m "suyu $(BuildName) $(Build.BuildNumber) $(Build.DefinitionName) $(DisplayPrefix)-$(DisplayVersion)"
displayName: 'Tag Source'
- script: git remote add other $(GitRepoPushChangesURL)
displayName: 'Register Repository'

View File

@ -8,6 +8,6 @@ steps:
inputs:
command: publish
publishDirectory: '$(Build.ArtifactStagingDirectory)'
vstsFeedPublish: 'yuzu-$(BuildName)'
vstsFeedPublish: 'suyu-$(BuildName)'
vstsFeedPackagePublish: 'main'
packagePublishDescription: 'Yuzu Windows and Linux Executable Packages'
packagePublishDescription: 'Suyu Windows and Linux Executable Packages'

View File

@ -6,7 +6,7 @@ steps:
- task: DownloadPipelineArtifact@2
displayName: 'Download Source'
inputs:
artifactName: 'yuzu-$(BuildName)-source'
artifactName: 'suyu-$(BuildName)-source'
buildType: 'current'
targetPath: '$(Build.ArtifactStagingDirectory)'
- script: rm -rf $(System.DefaultWorkingDirectory) && mkdir $(System.DefaultWorkingDirectory)

View File

@ -1,14 +0,0 @@
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
trigger:
- master
pool:
vmImage: 'ubuntu-latest'
stages:
- stage: merge
displayName: 'merge'
jobs:
- template: ./templates/merge-private.yml

View File

@ -1,59 +0,0 @@
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
trigger:
- master
variables:
DisplayVersion: $[counter(variables['DisplayPrefix'], 1)]
stages:
- stage: build
displayName: 'build'
jobs:
- job: linux
timeoutInMinutes: 120
displayName: 'linux'
pool:
vmImage: ubuntu-latest
strategy:
maxParallel: 10
matrix:
linux:
BuildSuffix: 'linux'
ScriptFolder: 'linux'
steps:
- template: ./templates/sync-source.yml
parameters:
artifactSource: $(parameters.artifactSource)
needSubmodules: 'true'
- template: ./templates/build-single.yml
parameters:
artifactSource: 'false'
cache: $(parameters.cache)
version: $(DisplayVersion)
- job: msvc
timeoutInMinutes: 120
displayName: 'windows'
pool:
vmImage: windows-2022
steps:
- template: ./templates/sync-source.yml
parameters:
artifactSource: $(parameters.artifactSource)
needSubmodules: 'true'
- template: ./templates/build-msvc.yml
parameters:
artifactSource: 'false'
cache: $(parameters.cache)
version: $(DisplayVersion)
- stage: release
displayName: 'release'
dependsOn: build
jobs:
- job: release
displayName: 'source'
pool:
vmImage: 'ubuntu-latest'
steps:
- template: ./templates/release-private-tag.yml

2
.github/FUNDING.yml vendored
View File

@ -3,4 +3,4 @@
# These are supported funding model platforms
patreon: yuzuteam
patreon: suyuteam

View File

@ -3,7 +3,7 @@ description: File a bug report
body:
- type: markdown
attributes:
value: Tech support does not belong here. You should only file an issue here if you think you have experienced an actual bug with yuzu.
value: Tech support does not belong here. You should only file an issue here if you think you have experienced an actual bug with suyu.
- type: checkboxes
attributes:
label: Is there an existing issue for this?
@ -43,7 +43,7 @@ body:
id: log
attributes:
label: Log File
description: A log file will help our developers to better diagnose and fix the issue. Instructions can be found [here](https://yuzu-emu.org/help/reference/log-files).
description: A log file will help our developers to better diagnose and fix the issue. Instructions can be found [here](https://suyu.dev/help/reference/log-files).
validations:
required: true
- type: textarea

View File

@ -1,8 +1,5 @@
blank_issues_enabled: false
contact_links:
- name: yuzu Discord
url: https://discord.com/invite/u77vRWY
about: If you are experiencing an issue with yuzu, and you need tech support, or if you have a general question, try asking in the official yuzu Discord linked here. Piracy is not allowed.
- name: Community forums
url: https://community.citra-emu.org
about: This is an alternative place for tech support, however helpers there are not as active.
- name: suyu Discord
url: https://discord.com/invite/suyu
about: If you are experiencing an issue with suyu, and you need tech support, or if you have a general question, try asking in the official suyu Discord linked here. Piracy is not allowed.

View File

@ -4,7 +4,7 @@ labels: "request"
body:
- type: markdown
attributes:
value: Tech support does not belong here. You should only file an issue here if you are requesting a feature you believe would make yuzu better.
value: Tech support does not belong here. You should only file an issue here if you are requesting a feature you believe would make suyu better.
- type: checkboxes
attributes:
label: Is there an existing issue for this?
@ -23,6 +23,6 @@ body:
id: why-feature
attributes:
label: Why would this feature be useful?
description: A brief description of why this feature would make yuzu better.
description: A brief description of why this feature would make suyu better.
validations:
required: true

View File

@ -1,7 +1,7 @@
# SPDX-FileCopyrightText: 2022 yuzu Emulator Project
# SPDX-License-Identifier: GPL-3.0-or-later
name: 'yuzu-android-build'
name: 'suyu-android-build'
on:
push:
@ -10,7 +10,7 @@ on:
jobs:
android:
runs-on: ubuntu-latest
if: ${{ github.repository == 'yuzu-emu/yuzu-android' }}
if: ${{ github.repository == 'suyu-emu/suyu-android' }}
steps:
- uses: actions/checkout@v3
with:

View File

@ -1,7 +1,7 @@
# SPDX-FileCopyrightText: 2024 yuzu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
name: yuzu-android-ea-play-release
name: suyu-android-ea-play-release
on:
workflow_dispatch:
@ -14,7 +14,7 @@ on:
jobs:
android:
runs-on: ubuntu-latest
if: ${{ github.repository == 'yuzu-emu/yuzu' }}
if: ${{ github.repository == 'suyu-emu/suyu' }}
steps:
- uses: actions/checkout@v3
name: Checkout
@ -62,5 +62,5 @@ jobs:
name: ${{ env.EA_TAG_NAME }}
draft: false
prerelease: false
repository: yuzu/yuzu-android
repository: suyu/suyu-android
token: ${{ secrets.ALT_GITHUB_TOKEN }}

View File

@ -1,13 +1,13 @@
# SPDX-FileCopyrightText: 2024 yuzu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
name: yuzu-android-mainline-play-release
name: suyu-android-mainline-play-release
on:
workflow_dispatch:
inputs:
release-tag:
description: 'Tag # from yuzu-android that you want to build and publish'
description: 'Tag # from suyu-android that you want to build and publish'
required: true
default: '200'
release-track:
@ -18,7 +18,7 @@ on:
jobs:
android:
runs-on: ubuntu-latest
if: ${{ github.repository == 'yuzu-emu/yuzu' }}
if: ${{ github.repository == 'suyu-emu/suyu' }}
steps:
- uses: actions/checkout@v3
name: Checkout

View File

@ -25,8 +25,8 @@ async function checkBaseChanges(github) {
}
}`;
const variables = {
owner: 'yuzu-emu',
name: 'yuzu',
owner: 'suyu-emu',
name: 'suyu',
ref: 'refs/heads/master',
};
const result = await github.graphql(query, variables);
@ -126,7 +126,7 @@ async function tagAndPushEA(github, owner, repo, execa) {
const newTag = `ea-${tagNumber + 1}`;
console.log(`New tag: ${newTag}`);
console.info('Pushing tags to GitHub ...');
await execa("git", ["remote", "add", "android", "https://github.com/yuzu-emu/yuzu-android.git"]);
await execa("git", ["remote", "add", "android", "https://gitlab.com/suyu-emu/suyu-android.git"]);
await execa("git", ["fetch", "android"]);
await execa("git", ['tag', newTag]);
@ -174,12 +174,12 @@ async function fetchPullRequests(pulls, repoUrl, execa) {
async function mergePullRequests(pulls, execa) {
let mergeResults = {};
console.log("::group::Merge pull requests");
await execa("git", ["config", "--global", "user.name", "yuzubot"]);
await execa("git", ["config", "--global", "user.name", "suyubot"]);
await execa("git", [
"config",
"--global",
"user.email",
"yuzu\x40yuzu-emu\x2eorg", // prevent email harvesters from scraping the address
"suyu\x40suyu-emu\x2eorg", // prevent email harvesters from scraping the address
]);
let hasFailed = false;
for (let pull of pulls) {
@ -195,7 +195,7 @@ async function mergePullRequests(pulls, execa) {
process1.stdout.pipe(process.stdout);
await process1;
const process2 = execa("git", ["commit", "-m", `Merge yuzu-emu#${pr}`]);
const process2 = execa("git", ["commit", "-m", `Merge suyu-emu#${pr}`]);
process2.stdout.pipe(process.stdout);
await process2;
@ -224,7 +224,7 @@ async function resetBranch(execa) {
console.log("::group::Reset master branch");
let hasFailed = false;
try {
await execa("git", ["remote", "add", "source", "https://github.com/yuzu-emu/yuzu.git"]);
await execa("git", ["remote", "add", "source", "https://gitlab.com/suyu-emu/suyu.git"]);
await execa("git", ["fetch", "source"]);
const process1 = await execa("git", ["rev-parse", "source/master"]);
const headCommit = process1.stdout;
@ -251,16 +251,16 @@ async function getPulls(github) {
}
}`;
const mainlineVariables = {
owner: 'yuzu-emu',
name: 'yuzu',
owner: 'suyu-emu',
name: 'suyu',
label: CHANGE_LABEL_MAINLINE,
};
const mainlineResult = await github.graphql(query, mainlineVariables);
const pulls = mainlineResult.repository.pullRequests.nodes;
if (BUILD_EA) {
const eaVariables = {
owner: 'yuzu-emu',
name: 'yuzu',
owner: 'suyu-emu',
name: 'suyu',
label: CHANGE_LABEL_EA,
};
const eaResult = await github.graphql(query, eaVariables);
@ -274,7 +274,7 @@ async function getMainlineTag(execa) {
console.log(`::group::Getting mainline tag android-${MAINLINE_TAG}`);
let hasFailed = false;
try {
await execa("git", ["remote", "add", "mainline", "https://github.com/yuzu-emu/yuzu-android.git"]);
await execa("git", ["remote", "add", "mainline", "https://gitlab.com/suyu-emu/suyu-android.git"]);
await execa("git", ["fetch", "mainline", "--tags"]);
await execa("git", ["checkout", `tags/android-${MAINLINE_TAG}`]);
await execa("git", ["submodule", "update", "--init", "--recursive"]);
@ -289,7 +289,7 @@ async function getMainlineTag(execa) {
}
async function mergebot(github, context, execa) {
// Reset our local copy of master to what appears on yuzu-emu/yuzu - master
// Reset our local copy of master to what appears on suyu-emu/suyu - master
await resetBranch(execa);
const pulls = await getPulls(github);
@ -300,14 +300,14 @@ async function mergebot(github, context, execa) {
}
console.info("The following pull requests will be merged:");
console.table(displayList);
await fetchPullRequests(pulls, "https://github.com/yuzu-emu/yuzu", execa);
await fetchPullRequests(pulls, "https://gitlab.com/suyu-emu/suyu", execa);
const mergeResults = await mergePullRequests(pulls, execa);
if (BUILD_EA) {
await tagAndPushEA(github, 'yuzu-emu', `yuzu-android`, execa);
await tagAndPushEA(github, 'suyu-emu', `suyu-android`, execa);
} else {
await generateReadme(pulls, context, mergeResults, execa);
await tagAndPush(github, 'yuzu-emu', `yuzu-android`, execa, true);
await tagAndPush(github, 'suyu-emu', `suyu-android`, execa, true);
}
}

View File

@ -87,7 +87,7 @@ jobs:
mkdir build
cd build
export Qt5_DIR="$(brew --prefix qt@5)/lib/cmake"
cmake .. -GNinja -DCMAKE_BUILD_TYPE=RelWithDebInfo -DYUZU_USE_BUNDLED_VCPKG=OFF -DYUZU_TESTS=OFF -DENABLE_WEB_SERVICE=OFF -DENABLE_LIBUSB=OFF
cmake .. -GNinja -DCMAKE_BUILD_TYPE=RelWithDebInfo -DSUYU_USE_BUNDLED_VCPKG=OFF -DSUYU_TESTS=OFF -DENABLE_WEB_SERVICE=OFF -DENABLE_LIBUSB=OFF
ninja
build-msvc:
name: 'test build (windows, msvc)'
@ -129,7 +129,7 @@ jobs:
run: |
glslangValidator --version
mkdir build
cmake . -B build -GNinja -DCMAKE_TOOLCHAIN_FILE="CMakeModules/MSVCCache.cmake" -DUSE_CCACHE=ON -DYUZU_USE_BUNDLED_QT=1 -DYUZU_USE_BUNDLED_SDL2=1 -DYUZU_USE_QT_WEB_ENGINE=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DYUZU_ENABLE_COMPATIBILITY_REPORTING=ON -DUSE_DISCORD_PRESENCE=ON -DENABLE_QT_TRANSLATION=ON -DCMAKE_BUILD_TYPE=Release -DGIT_BRANCH=pr-verify -DYUZU_CRASH_DUMPS=ON
cmake . -B build -GNinja -DCMAKE_TOOLCHAIN_FILE="CMakeModules/MSVCCache.cmake" -DUSE_CCACHE=ON -DSUYU_USE_BUNDLED_QT=1 -DSUYU_USE_BUNDLED_SDL2=1 -DSUYU_USE_QT_WEB_ENGINE=ON -DENABLE_COMPATIBILITY_LIST_DOWNLOAD=ON -DSUYU_ENABLE_COMPATIBILITY_REPORTING=ON -DUSE_DISCORD_PRESENCE=ON -DENABLE_QT_TRANSLATION=ON -DCMAKE_BUILD_TYPE=Release -DGIT_BRANCH=pr-verify -DSUYU_CRASH_DUMPS=ON
- name: Build
run: cmake --build build
- name: Cache Summary

View File

@ -12,8 +12,8 @@ Files: dist/english_plurals/*
Copyright: suyu Emulator Project
License: GPL-2.0-or-later
Files: dist/qt_themes/default/icons/256x256/yuzu.png
dist/yuzu.bmp
Files: dist/qt_themes/default/icons/256x256/suyu.png
dist/suyu.bmp
dist/suyu.icns
dist/suyu.ico
dist/suyu.svg
@ -108,22 +108,22 @@ Files: externals/FidelityFX-FSR/*
Copyright: 2021 Advanced Micro Devices, Inc.
License: MIT
Files: src/yuzu/*.ui
Files: src/suyu/*.ui
Copyright: 2018-2022 yuzu Emulator Project
License: GPL-2.0-or-later
Files: src/yuzu/compatdb.ui
src/yuzu/main.ui
Files: src/suyu/compatdb.ui
src/suyu/main.ui
Copyright: 2014-2017 Citra Emulator Project
License: GPL-2.0-or-later
Files: src/yuzu/loading_screen.ui
Files: src/suyu/loading_screen.ui
Copyright: 2019 James Rowe <jroweboy@gmail.com>
License: GPL-2.0-or-later
Files: src/yuzu/applets/aboutdialog.ui
src/yuzu/applets/qt_software_keyboard.ui
src/yuzu/util/overlay_dialog.ui
Files: src/suyu/applets/aboutdialog.ui
src/suyu/applets/qt_software_keyboard.ui
src/suyu/util/overlay_dialog.ui
Copyright: 2020-2021 Its-Rei <kupfel@gmail.com>
2020-2021 yuzu Emulator Project
License: GPL-2.0-or-later

View File

@ -1,9 +1,9 @@
# SPDX-FileCopyrightText: 2018 yuzu Emulator Project
# SPDX-FileCopyrightText: 2018 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
cmake_minimum_required(VERSION 3.22)
project(yuzu)
project(suyu)
list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/CMakeModules")
list(APPEND CMAKE_MODULE_PATH "${CMAKE_CURRENT_SOURCE_DIR}/externals/cmake-modules")
@ -15,9 +15,9 @@ include(CTest)
# Set bundled sdl2/qt as dependent options.
# OFF by default, but if ENABLE_SDL2 and MSVC are true then ON
option(ENABLE_SDL2 "Enable the SDL2 frontend" ON)
CMAKE_DEPENDENT_OPTION(YUZU_USE_BUNDLED_SDL2 "Download bundled SDL2 binaries" ON "ENABLE_SDL2;MSVC" OFF)
CMAKE_DEPENDENT_OPTION(SUYU_USE_BUNDLED_SDL2 "Download bundled SDL2 binaries" ON "ENABLE_SDL2;MSVC" OFF)
# On Linux system SDL2 is likely to be lacking HIDAPI support which have drawbacks but is needed for SDL motion
CMAKE_DEPENDENT_OPTION(YUZU_USE_EXTERNAL_SDL2 "Compile external SDL2" ON "ENABLE_SDL2;NOT MSVC" OFF)
CMAKE_DEPENDENT_OPTION(SUYU_USE_EXTERNAL_SDL2 "Compile external SDL2" ON "ENABLE_SDL2;NOT MSVC" OFF)
cmake_dependent_option(ENABLE_LIBUSB "Enable the use of LibUSB" ON "NOT ANDROID" OFF)
@ -28,45 +28,45 @@ option(ENABLE_QT6 "Allow usage of Qt6 to be attempted" OFF)
set(QT6_LOCATION "" CACHE PATH "Additional Location to search for Qt6 libraries like C:/Qt/6.3.1/msvc2019_64/")
option(ENABLE_QT_TRANSLATION "Enable translations for the Qt frontend" OFF)
CMAKE_DEPENDENT_OPTION(YUZU_USE_BUNDLED_QT "Download bundled Qt binaries" "${MSVC}" "ENABLE_QT" OFF)
CMAKE_DEPENDENT_OPTION(SUYU_USE_BUNDLED_QT "Download bundled Qt binaries" "${MSVC}" "ENABLE_QT" OFF)
option(ENABLE_WEB_SERVICE "Enable web services (telemetry, etc.)" OFF)
option(YUZU_USE_BUNDLED_FFMPEG "Download/Build bundled FFmpeg" "${WIN32}")
option(SUYU_USE_BUNDLED_FFMPEG "Download/Build bundled FFmpeg" "${WIN32}")
option(YUZU_USE_EXTERNAL_VULKAN_HEADERS "Use Vulkan-Headers from externals" ON)
option(SUYU_USE_EXTERNAL_VULKAN_HEADERS "Use Vulkan-Headers from externals" ON)
option(YUZU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES "Use Vulkan-Utility-Libraries from externals" ON)
option(SUYU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES "Use Vulkan-Utility-Libraries from externals" ON)
option(SUYU_USE_QT_MULTIMEDIA "Use QtMultimedia for Camera" OFF)
option(YUZU_USE_QT_WEB_ENGINE "Use QtWebEngine for web applet implementation" OFF)
option(SUYU_USE_QT_WEB_ENGINE "Use QtWebEngine for web applet implementation" OFF)
option(ENABLE_CUBEB "Enables the cubeb audio backend" ON)
option(USE_DISCORD_PRESENCE "Enables Discord Rich Presence" OFF)
option(YUZU_TESTS "Compile tests" "${BUILD_TESTING}")
option(SUYU_TESTS "Compile tests" "${BUILD_TESTING}")
option(YUZU_USE_PRECOMPILED_HEADERS "Use precompiled headers" ON)
option(SUYU_USE_PRECOMPILED_HEADERS "Use precompiled headers" ON)
option(YUZU_DOWNLOAD_ANDROID_VVL "Download validation layer binary for android" ON)
option(SUYU_DOWNLOAD_ANDROID_VVL "Download validation layer binary for android" ON)
CMAKE_DEPENDENT_OPTION(YUZU_ROOM "Compile LDN room server" ON "NOT ANDROID" OFF)
CMAKE_DEPENDENT_OPTION(SUYU_ROOM "Compile LDN room server" ON "NOT ANDROID" OFF)
CMAKE_DEPENDENT_OPTION(YUZU_CRASH_DUMPS "Compile crash dump (Minidump) support" OFF "WIN32 OR LINUX" OFF)
CMAKE_DEPENDENT_OPTION(SUYU_CRASH_DUMPS "Compile crash dump (Minidump) support" OFF "WIN32 OR LINUX" OFF)
option(YUZU_USE_BUNDLED_VCPKG "Use vcpkg for yuzu dependencies" "${MSVC}")
option(SUYU_USE_BUNDLED_VCPKG "Use vcpkg for suyu dependencies" "${MSVC}")
option(YUZU_CHECK_SUBMODULES "Check if submodules are present" ON)
option(SUYU_CHECK_SUBMODULES "Check if submodules are present" ON)
option(YUZU_ENABLE_LTO "Enable link-time optimization" OFF)
option(SUYU_ENABLE_LTO "Enable link-time optimization" OFF)
option(YUZU_DOWNLOAD_TIME_ZONE_DATA "Always download time zone binaries" OFF)
option(SUYU_DOWNLOAD_TIME_ZONE_DATA "Always download time zone binaries" OFF)
option(SUYU_ENABLE_PORTABLE "Allow suyu to enable portable mode if a user folder is found in the CWD" ON)
CMAKE_DEPENDENT_OPTION(YUZU_USE_FASTER_LD "Check if a faster linker is available" ON "NOT WIN32" OFF)
CMAKE_DEPENDENT_OPTION(SUYU_USE_FASTER_LD "Check if a faster linker is available" ON "NOT WIN32" OFF)
CMAKE_DEPENDENT_OPTION(USE_SYSTEM_MOLTENVK "Use the system MoltenVK lib (instead of the bundled one)" OFF "APPLE" OFF)
@ -82,7 +82,7 @@ if (ANDROID OR WIN32 OR APPLE)
endif()
option(ENABLE_OPENSSL "Enable OpenSSL backend for ISslConnection" ${DEFAULT_ENABLE_OPENSSL})
if (ANDROID AND YUZU_DOWNLOAD_ANDROID_VVL)
if (ANDROID AND SUYU_DOWNLOAD_ANDROID_VVL)
set(vvl_version "sdk-1.3.261.1")
set(vvl_zip_file "${CMAKE_BINARY_DIR}/externals/vvl-android.zip")
if (NOT EXISTS "${vvl_zip_file}")
@ -104,7 +104,7 @@ if (ANDROID)
set(CMAKE_SKIP_INSTALL_RULES ON)
endif()
if (YUZU_USE_BUNDLED_VCPKG)
if (SUYU_USE_BUNDLED_VCPKG)
if (ANDROID)
set(ENV{ANDROID_NDK_HOME} "${ANDROID_NDK}")
list(APPEND VCPKG_MANIFEST_FEATURES "android")
@ -138,8 +138,8 @@ if (YUZU_USE_BUNDLED_VCPKG)
endif()
endif()
if (YUZU_TESTS)
list(APPEND VCPKG_MANIFEST_FEATURES "yuzu-tests")
if (SUYU_TESTS)
list(APPEND VCPKG_MANIFEST_FEATURES "suyu-tests")
endif()
if (ENABLE_WEB_SERVICE)
list(APPEND VCPKG_MANIFEST_FEATURES "web-service")
@ -155,16 +155,16 @@ elseif(NOT "$ENV{VCPKG_TOOLCHAIN_FILE}" STREQUAL "")
include("$ENV{VCPKG_TOOLCHAIN_FILE}")
endif()
if (YUZU_USE_PRECOMPILED_HEADERS)
if (SUYU_USE_PRECOMPILED_HEADERS)
if (MSVC AND CCACHE)
# buildcache does not properly cache PCH files, leading to compilation errors.
# See https://github.com/mbitsnbites/buildcache/discussions/230
message(WARNING "buildcache does not properly support Precompiled Headers. Disabling PCH")
set(DYNARMIC_USE_PRECOMPILED_HEADERS OFF CACHE BOOL "" FORCE)
set(YUZU_USE_PRECOMPILED_HEADERS OFF CACHE BOOL "" FORCE)
set(SUYU_USE_PRECOMPILED_HEADERS OFF CACHE BOOL "" FORCE)
endif()
endif()
if (YUZU_USE_PRECOMPILED_HEADERS)
if (SUYU_USE_PRECOMPILED_HEADERS)
message(STATUS "Using Precompiled Headers.")
set(CMAKE_PCH_INSTANTIATE_TEMPLATES ON)
endif()
@ -199,7 +199,7 @@ function(check_submodules_present)
endforeach()
endfunction()
if(EXISTS ${PROJECT_SOURCE_DIR}/.gitmodules AND YUZU_CHECK_SUBMODULES)
if(EXISTS ${PROJECT_SOURCE_DIR}/.gitmodules AND SUYU_CHECK_SUBMODULES)
check_submodules_present()
endif()
configure_file(${PROJECT_SOURCE_DIR}/dist/compatibility_list/compatibility_list.qrc
@ -211,9 +211,9 @@ if (EXISTS ${PROJECT_SOURCE_DIR}/dist/compatibility_list/compatibility_list.json
COPYONLY)
endif()
if (ENABLE_COMPATIBILITY_LIST_DOWNLOAD AND NOT EXISTS ${PROJECT_BINARY_DIR}/dist/compatibility_list/compatibility_list.json)
message(STATUS "Downloading compatibility list for yuzu...")
message(STATUS "Downloading compatibility list for suyu...")
file(DOWNLOAD
https://api.yuzu-emu.org/gamedb/
https://api.suyu.dev/gamedb/
"${PROJECT_BINARY_DIR}/dist/compatibility_list/compatibility_list.json" SHOW_PROGRESS)
endif()
if (NOT EXISTS ${PROJECT_BINARY_DIR}/dist/compatibility_list/compatibility_list.json)
@ -306,11 +306,11 @@ find_package(VulkanMemoryAllocator CONFIG)
find_package(ZLIB 1.2 REQUIRED)
find_package(zstd 1.5 REQUIRED)
if (NOT YUZU_USE_EXTERNAL_VULKAN_HEADERS)
if (NOT SUYU_USE_EXTERNAL_VULKAN_HEADERS)
find_package(VulkanHeaders 1.3.274 REQUIRED)
endif()
if (NOT YUZU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES)
if (NOT SUYU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES)
find_package(VulkanUtilityLibraries REQUIRED)
endif()
@ -346,7 +346,7 @@ if (ENABLE_WEB_SERVICE OR USE_DISCORD_PRESENCE)
find_package(httplib 0.12 MODULE COMPONENTS OpenSSL)
endif()
if (YUZU_TESTS)
if (SUYU_TESTS)
find_package(Catch2 3.0.1 REQUIRED)
endif()
@ -368,26 +368,26 @@ if(ENABLE_QT6 AND Qt6_LOCATION)
list(APPEND CMAKE_PREFIX_PATH "${Qt6_LOCATION}")
endif()
function(set_yuzu_qt_components)
function(set_suyu_qt_components)
# Best practice is to ask for all components at once, so they are from the same version
set(YUZU_QT_COMPONENTS2 Core Widgets Concurrent)
set(SUYU_QT_COMPONENTS2 Core Widgets Concurrent)
if (${CMAKE_SYSTEM_NAME} STREQUAL "Linux")
list(APPEND YUZU_QT_COMPONENTS2 DBus)
list(APPEND SUYU_QT_COMPONENTS2 DBus)
endif()
if (SUYU_USE_QT_MULTIMEDIA)
list(APPEND YUZU_QT_COMPONENTS2 Multimedia)
list(APPEND SUYU_QT_COMPONENTS2 Multimedia)
endif()
if (YUZU_USE_QT_WEB_ENGINE)
list(APPEND YUZU_QT_COMPONENTS2 WebEngineCore WebEngineWidgets)
if (SUYU_USE_QT_WEB_ENGINE)
list(APPEND SUYU_QT_COMPONENTS2 WebEngineCore WebEngineWidgets)
endif()
if (ENABLE_QT_TRANSLATION)
list(APPEND YUZU_QT_COMPONENTS2 LinguistTools)
list(APPEND SUYU_QT_COMPONENTS2 LinguistTools)
endif()
if (USE_DISCORD_PRESENCE)
list(APPEND YUZU_QT_COMPONENTS2 Network)
list(APPEND SUYU_QT_COMPONENTS2 Network)
endif()
set(YUZU_QT_COMPONENTS ${YUZU_QT_COMPONENTS2} PARENT_SCOPE)
endfunction(set_yuzu_qt_components)
set(SUYU_QT_COMPONENTS ${SUYU_QT_COMPONENTS2} PARENT_SCOPE)
endfunction(set_suyu_qt_components)
# Qt5 requires that we find components, so it doesn't fit our pretty little find package function
if(ENABLE_QT)
@ -396,18 +396,18 @@ if(ENABLE_QT)
set(QT5_VERSION 5.15)
set(QT6_VERSION 6.3.1)
set_yuzu_qt_components()
set_suyu_qt_components()
if (ENABLE_QT6)
find_package(Qt6 ${QT6_VERSION} COMPONENTS ${YUZU_QT_COMPONENTS})
find_package(Qt6 ${QT6_VERSION} COMPONENTS ${SUYU_QT_COMPONENTS})
endif()
if (Qt6_FOUND)
message(STATUS "yuzu/CMakeLists.txt: Qt6Widgets_VERSION ${Qt6Widgets_VERSION}, setting QT_VERSION")
message(STATUS "suyu/CMakeLists.txt: Qt6Widgets_VERSION ${Qt6Widgets_VERSION}, setting QT_VERSION")
set(QT_VERSION ${Qt6Widgets_VERSION})
set(QT_MAJOR_VERSION 6)
# Qt6 sets cxx_std_17 and we need to undo that
set_target_properties(Qt6::Platform PROPERTIES INTERFACE_COMPILE_FEATURES "")
else()
message(STATUS "yuzu/CMakeLists.txt: Qt6 not found/not selected, trying for Qt5")
message(STATUS "suyu/CMakeLists.txt: Qt6 not found/not selected, trying for Qt5")
# When Qt6 partially found, need this set to use Qt5 when not specifying version
set(QT_DEFAULT_MAJOR_VERSION 5)
set(QT_MAJOR_VERSION 5)
@ -415,10 +415,10 @@ if(ENABLE_QT)
set(SUYU_USE_QT_MULTIMEDIA ON)
# Check for system Qt on Linux, fallback to bundled Qt
if (UNIX AND NOT APPLE)
if (NOT YUZU_USE_BUNDLED_QT)
if (NOT SUYU_USE_BUNDLED_QT)
find_package(Qt5 ${QT5_VERSION} COMPONENTS Widgets DBus Multimedia)
endif()
if (${CMAKE_SYSTEM_NAME} STREQUAL "Linux" AND (NOT Qt5_FOUND OR YUZU_USE_BUNDLED_QT))
if (${CMAKE_SYSTEM_NAME} STREQUAL "Linux" AND (NOT Qt5_FOUND OR SUYU_USE_BUNDLED_QT))
# Check for dependencies, then enable bundled Qt download
# Check that the system GLIBCXX version is compatible
@ -492,23 +492,23 @@ if(ENABLE_QT)
message(FATAL_ERROR "Bundled Qt package missing required dependencies: ${UNRESOLVED_QT_DEPS}")
endif()
set(YUZU_USE_BUNDLED_QT ON CACHE BOOL "Download bundled Qt" FORCE)
set(SUYU_USE_BUNDLED_QT ON CACHE BOOL "Download bundled Qt" FORCE)
endif()
if (YUZU_USE_BUNDLED_QT)
if (SUYU_USE_BUNDLED_QT)
# Binary package currently does not support Qt webengine, so make sure it's disabled
set(YUZU_USE_QT_WEB_ENGINE OFF CACHE BOOL "Use Qt Webengine" FORCE)
set(SUYU_USE_QT_WEB_ENGINE OFF CACHE BOOL "Use Qt Webengine" FORCE)
endif()
endif()
set(YUZU_QT_NO_CMAKE_SYSTEM_PATH)
set(SUYU_QT_NO_CMAKE_SYSTEM_PATH)
if(YUZU_USE_BUNDLED_QT)
if(SUYU_USE_BUNDLED_QT)
if ((MSVC_VERSION GREATER_EQUAL 1920 AND MSVC_VERSION LESS 1940) AND ARCHITECTURE_x86_64)
set(QT_BUILD qt-5.15.2-msvc2019_64)
elseif ((${CMAKE_SYSTEM_NAME} STREQUAL "Linux") AND NOT MINGW AND ARCHITECTURE_x86_64)
set(QT_BUILD qt5_5_15_2)
else()
message(FATAL_ERROR "No bundled Qt binaries for your toolchain. Disable YUZU_USE_BUNDLED_QT and provide your own.")
message(FATAL_ERROR "No bundled Qt binaries for your toolchain. Disable SUYU_USE_BUNDLED_QT and provide your own.")
endif()
if (DEFINED QT_BUILD)
@ -517,25 +517,25 @@ if(ENABLE_QT)
set(QT_PREFIX_HINT HINTS "${QT_PREFIX}")
set(YUZU_QT_NO_CMAKE_SYSTEM_PATH "NO_CMAKE_SYSTEM_PATH")
set(SUYU_QT_NO_CMAKE_SYSTEM_PATH "NO_CMAKE_SYSTEM_PATH")
# Binary package for Qt5 has Qt Multimedia
set(SUYU_USE_QT_MULTIMEDIA ON CACHE BOOL "Use Qt Multimedia" FORCE)
endif()
set_yuzu_qt_components()
find_package(Qt5 ${QT5_VERSION} COMPONENTS ${YUZU_QT_COMPONENTS} ${QT_PREFIX_HINT} ${YUZU_QT_NO_CMAKE_SYSTEM_PATH})
set_suyu_qt_components()
find_package(Qt5 ${QT5_VERSION} COMPONENTS ${SUYU_QT_COMPONENTS} ${QT_PREFIX_HINT} ${SUYU_QT_NO_CMAKE_SYSTEM_PATH})
endif()
endif()
# find SDL2 exports a bunch of variables that are needed, so its easier to do this outside of the yuzu_find_package
# find SDL2 exports a bunch of variables that are needed, so its easier to do this outside of the suyu_find_package
if (ENABLE_SDL2)
if (YUZU_USE_BUNDLED_SDL2)
if (SUYU_USE_BUNDLED_SDL2)
# Detect toolchain and platform
if ((MSVC_VERSION GREATER_EQUAL 1920 AND MSVC_VERSION LESS 1940) AND ARCHITECTURE_x86_64)
set(SDL2_VER "SDL2-2.28.2")
else()
message(FATAL_ERROR "No bundled SDL2 binaries for your toolchain. Disable YUZU_USE_BUNDLED_SDL2 and provide your own.")
message(FATAL_ERROR "No bundled SDL2 binaries for your toolchain. Disable SUYU_USE_BUNDLED_SDL2 and provide your own.")
endif()
if (DEFINED SDL2_VER)
@ -550,7 +550,7 @@ if (ENABLE_SDL2)
add_library(SDL2::SDL2 INTERFACE IMPORTED)
target_link_libraries(SDL2::SDL2 INTERFACE "${SDL2_LIBRARY}")
target_include_directories(SDL2::SDL2 INTERFACE "${SDL2_INCLUDE_DIR}")
elseif (YUZU_USE_EXTERNAL_SDL2)
elseif (SUYU_USE_EXTERNAL_SDL2)
message(STATUS "Using SDL2 from externals.")
else()
find_package(SDL2 2.26.4 REQUIRED)
@ -568,12 +568,12 @@ if (UNIX AND NOT APPLE AND NOT ANDROID)
find_package(PkgConfig REQUIRED)
pkg_check_modules(LIBVA libva)
endif()
if (NOT YUZU_USE_BUNDLED_FFMPEG)
if (NOT SUYU_USE_BUNDLED_FFMPEG)
# Use system installed FFmpeg
find_package(FFmpeg 4.3 REQUIRED QUIET COMPONENTS ${FFmpeg_COMPONENTS})
endif()
if (WIN32 AND YUZU_CRASH_DUMPS)
if (WIN32 AND SUYU_CRASH_DUMPS)
set(BREAKPAD_VER "breakpad-c89f9dd")
download_bundled_external("breakpad/" ${BREAKPAD_VER} BREAKPAD_PREFIX)
@ -688,7 +688,7 @@ if (MSVC AND CMAKE_GENERATOR STREQUAL "Ninja")
)
endif()
if (YUZU_USE_FASTER_LD AND CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
if (SUYU_USE_FASTER_LD AND CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
# We will assume that if the compiler is GCC, it will attempt to use ld.bfd by default.
# Try to pick a faster linker.
find_program(LLD lld)
@ -706,11 +706,11 @@ endif()
add_subdirectory(externals)
add_subdirectory(src)
# Set yuzu project or yuzu-cmd project as default StartUp Project in Visual Studio depending on whether QT is enabled or not
# Set suyu project or suyu-cmd project as default StartUp Project in Visual Studio depending on whether QT is enabled or not
if(ENABLE_QT)
set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT yuzu)
set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT suyu)
else()
set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT yuzu-cmd)
set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT suyu-cmd)
endif()

View File

@ -1,10 +1,10 @@
# SPDX-FileCopyrightText: 2020 yuzu Emulator Project
# SPDX-FileCopyrightText: 2020 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
function(copy_yuzu_FFmpeg_deps target_dir)
function(copy_suyu_FFmpeg_deps target_dir)
include(WindowsCopyFiles)
set(DLL_DEST "$<TARGET_FILE_DIR:${target_dir}>/")
file(READ "${FFmpeg_PATH}/requirements.txt" FFmpeg_REQUIRED_DLLS)
string(STRIP "${FFmpeg_REQUIRED_DLLS}" FFmpeg_REQUIRED_DLLS)
windows_copy_files(${target_dir} ${FFmpeg_LIBRARY_DIR} ${DLL_DEST} ${FFmpeg_REQUIRED_DLLS})
endfunction(copy_yuzu_FFmpeg_deps)
endfunction(copy_suyu_FFmpeg_deps)

View File

@ -1,7 +1,7 @@
# SPDX-FileCopyrightText: 2016 Citra Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
function(copy_yuzu_Qt5_deps target_dir)
function(copy_suyu_Qt5_deps target_dir)
include(WindowsCopyFiles)
set(Qt5_BASE_PATH "${Qt5_DIR}/../../..")
if (NOT EXISTS "${Qt5_BASE_PATH}/bin")
@ -38,7 +38,7 @@ function(copy_yuzu_Qt5_deps target_dir)
Qt5Multimedia$<$<CONFIG:Debug>:d>.*
)
endif()
if (YUZU_USE_QT_WEB_ENGINE)
if (SUYU_USE_QT_WEB_ENGINE)
windows_copy_files(${target_dir} ${Qt5_DLL_DIR} ${DLL_DEST}
Qt5Network$<$<CONFIG:Debug>:d>.*
Qt5Positioning$<$<CONFIG:Debug>:d>.*
@ -61,13 +61,13 @@ function(copy_yuzu_Qt5_deps target_dir)
qtwebengine_resources_200p.pak
)
endif ()
windows_copy_files(yuzu ${Qt5_PLATFORMS_DIR} ${PLATFORMS} qwindows$<$<CONFIG:Debug>:d>.*)
windows_copy_files(yuzu ${Qt5_STYLES_DIR} ${STYLES} qwindowsvistastyle$<$<CONFIG:Debug>:d>.*)
windows_copy_files(yuzu ${Qt5_IMAGEFORMATS_DIR} ${IMAGEFORMATS}
windows_copy_files(suyu ${Qt5_PLATFORMS_DIR} ${PLATFORMS} qwindows$<$<CONFIG:Debug>:d>.*)
windows_copy_files(suyu ${Qt5_STYLES_DIR} ${STYLES} qwindowsvistastyle$<$<CONFIG:Debug>:d>.*)
windows_copy_files(suyu ${Qt5_IMAGEFORMATS_DIR} ${IMAGEFORMATS}
qjpeg$<$<CONFIG:Debug>:d>.*
qgif$<$<CONFIG:Debug>:d>.*
)
windows_copy_files(yuzu ${Qt5_MEDIASERVICE_DIR} ${MEDIASERVICE}
windows_copy_files(suyu ${Qt5_MEDIASERVICE_DIR} ${MEDIASERVICE}
dsengine$<$<CONFIG:Debug>:d>.*
wmfengine$<$<CONFIG:Debug>:d>.*
)
@ -123,7 +123,7 @@ function(copy_yuzu_Qt5_deps target_dir)
endif()
# Create an empty qt.conf file. Qt will detect that this file exists, and use the folder that its in as the root folder.
# This way it'll look for plugins in the root/plugins/ folder
add_custom_command(TARGET yuzu POST_BUILD
add_custom_command(TARGET suyu POST_BUILD
COMMAND ${CMAKE_COMMAND} -E touch ${DLL_DEST}qt.conf
)
endfunction(copy_yuzu_Qt5_deps)
endfunction(copy_suyu_Qt5_deps)

View File

@ -1,8 +1,8 @@
# SPDX-FileCopyrightText: 2016 Citra Emulator Project
# SPDX-FileCopyrightText: 2016 Citra Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
function(copy_yuzu_SDL_deps target_dir)
function(copy_suyu_SDL_deps target_dir)
include(WindowsCopyFiles)
set(DLL_DEST "$<TARGET_FILE_DIR:${target_dir}>/")
windows_copy_files(${target_dir} ${SDL2_DLL_DIR} ${DLL_DEST} SDL2.dll)
endfunction(copy_yuzu_SDL_deps)
endfunction(copy_suyu_SDL_deps)

View File

@ -19,7 +19,7 @@ if (LLVM_FOUND AND LLVM_Demangle_FOUND AND NOT TARGET LLVM::Demangle)
target_include_directories(LLVM::Demangle INTERFACE ${LLVM_INCLUDE_DIRS})
# prefer shared LLVM: https://github.com/llvm/llvm-project/issues/34593
# but use ugly hack because llvm_config doesn't support interface library
add_library(_dummy_lib SHARED EXCLUDE_FROM_ALL src/yuzu/main.cpp)
add_library(_dummy_lib SHARED EXCLUDE_FROM_ALL src/suyu/main.cpp)
llvm_config(_dummy_lib USE_SHARED demangle)
get_target_property(LLVM_LIBRARIES _dummy_lib LINK_LIBRARIES)
target_link_libraries(LLVM::Demangle INTERFACE ${LLVM_LIBRARIES})

View File

@ -1,4 +1,4 @@
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project
# SPDX-FileCopyrightText: 2019 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
# Gets a UTC timestamp and sets the provided variable to it
@ -27,7 +27,7 @@ set(BUILD_VERSION "0")
set(BUILD_ID ${DISPLAY_VERSION})
if (BUILD_REPOSITORY)
# regex capture the string nightly or canary into CMAKE_MATCH_1
string(REGEX MATCH "yuzu-emu/yuzu-?(.*)" OUTVAR ${BUILD_REPOSITORY})
string(REGEX MATCH "suyu-emu/suyu-?(.*)" OUTVAR ${BUILD_REPOSITORY})
if ("${CMAKE_MATCH_COUNT}" GREATER 0)
# capitalize the first letter of each word in the repo name.
string(REPLACE "-" ";" REPO_NAME_LIST ${CMAKE_MATCH_1})

View File

@ -1,9 +1,9 @@
<!--
SPDX-FileCopyrightText: 2018 yuzu Emulator Project
SPDX-FileCopyrightText: 2018 yuzu Emulator Project & 2024 suyu Emulator Project
SPDX-License-Identifier: GPL-2.0-or-later
-->
Please check out the
* [Conributors's guide](https://gitlab.com/suyu2/suyu/-/wikis/Contributing).
* [Conributors's guide](https://gitlab.com/suyu-emu/suyu/-/wikis/Contributing).
* [Merge request guidelines](https://gitlab.com/suyu-emu/suyu/-/wikis/Merge-requests)

View File

@ -35,7 +35,7 @@ DOXYFILE_ENCODING = UTF-8
# title of most generated pages and in a few other places.
# The default value is: My Project.
PROJECT_NAME = yuzu
PROJECT_NAME = suyu
# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
# could be handy for archiving the generated documentation or if some version

View File

@ -1,8 +1,8 @@
# SPDX-FileCopyrightText: 2023 yuzu Emulator Project
# SPDX-FileCopyrightText: 2023 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
# Allow systemd-logind to manage user access to hidraw with this file
# On most systems, this file should be installed to /etc/udev/rules.d/72-yuzu-input.rules
# On most systems, this file should be installed to /etc/udev/rules.d/72-suyu-input.rules
# Consult your distro if this is not the case
# Switch Pro Controller (USB/Bluetooth)

View File

@ -10,7 +10,7 @@ Qt has "Translation Rules for Plurals", small example
// i = 2:
Building: 2 shaders
For yuzu the source language used is English, for all other languages handling of plurals is handled by Qt and the translation collaboration site. Handling plurals in the source language (English) requires special consideration.
For suyu the source language used is English, for all other languages handling of plurals is handled by Qt and the translation collaboration site. Handling plurals in the source language (English) requires special consideration.
With CMake flag GENERATE_QT_TRANSLATION a generated_en.ts file is created from the source. It ignored by git (`.gitignore` in the project root). It is placed in this directory so that the relative refrences with the source code is correct.

View File

@ -4,7 +4,7 @@
<context>
<name>GMainWindow</name>
<message numerus="yes">
<location filename="../../src/yuzu/main.cpp" line="2322"/>
<location filename="../../src/suyu/main.cpp" line="2322"/>
<source>%n file(s) remaining</source>
<translation>
<numerusform>%n file remaining</numerusform>
@ -12,7 +12,7 @@
</translation>
</message>
<message numerus="yes">
<location filename="../../src/yuzu/main.cpp" line="2377"/>
<location filename="../../src/suyu/main.cpp" line="2377"/>
<source>%n file(s) were newly installed
</source>
<translation>
@ -23,7 +23,7 @@
</translation>
</message>
<message numerus="yes">
<location filename="../../src/yuzu/main.cpp" line="2380"/>
<location filename="../../src/suyu/main.cpp" line="2380"/>
<source>%n file(s) were overwritten
</source>
<translation>
@ -34,7 +34,7 @@
</translation>
</message>
<message numerus="yes">
<location filename="../../src/yuzu/main.cpp" line="2382"/>
<location filename="../../src/suyu/main.cpp" line="2382"/>
<source>%n file(s) failed to install
</source>
<translation>
@ -45,7 +45,7 @@
</translation>
</message>
<message numerus="yes">
<location filename="../../src/yuzu/main.cpp" line="3264"/>
<location filename="../../src/suyu/main.cpp" line="3264"/>
<source>Building: %n shader(s)</source>
<translation>
<numerusform>Building: %n shader</numerusform>
@ -56,7 +56,7 @@
<context>
<name>GameListSearchField</name>
<message numerus="yes">
<location filename="../../src/yuzu/game_list.cpp" line="87"/>
<location filename="../../src/suyu/game_list.cpp" line="87"/>
<source>%1 of %n result(s)</source>
<translation>
<numerusform>%1 of %n result</numerusform>

View File

@ -1,13 +1,13 @@
[main]
host = https://www.transifex.com
[o:yuzu-emulator:p:yuzu:r:emulator]
[o:suyu-emulator:p:suyu:r:emulator]
file_filter = <lang>.ts
source_file = en.ts
source_lang = en
type = QT
[o:yuzu-emulator:p:yuzu:r:yuzu-android]
[o:suyu-emulator:p:suyu:r:suyu-android]
file_filter = ../../src/android/app/src/main/res/values-<lang>/strings.xml
source_file = ../../src/android/app/src/main/res/values/strings.xml
type = ANDROID

View File

@ -1,3 +1,3 @@
This directory stores translation patches (TS files) for yuzu Qt frontend. This directory is linked with [yuzu project on transifex](https://www.transifex.com/yuzu-emulator/yuzu), so you can update the translation by executing `tx pull -t -a`. If you want to contribute to the translation, please go the transifex link and submit your translation there. This directory on the main repo will be synchronized with transifex periodically.
This directory stores translation patches (TS files) for suyu Qt frontend. This directory is linked with [suyu project on transifex](https://www.transifex.com/suyu-emulator/suyu), so you can update the translation by executing `tx pull -t -a`. If you want to contribute to the translation, please go the transifex link and submit your translation there. This directory on the main repo will be synchronized with transifex periodically.
Do not directly open PRs on github to modify the translation.

4028
dist/languages/ar.ts vendored

File diff suppressed because it is too large Load Diff

4086
dist/languages/ca.ts vendored

File diff suppressed because it is too large Load Diff

4074
dist/languages/cs.ts vendored

File diff suppressed because it is too large Load Diff

4070
dist/languages/da.ts vendored

File diff suppressed because it is too large Load Diff

4100
dist/languages/de.ts vendored

File diff suppressed because it is too large Load Diff

4052
dist/languages/el.ts vendored

File diff suppressed because it is too large Load Diff

4106
dist/languages/es.ts vendored

File diff suppressed because it is too large Load Diff

2910
dist/languages/fi.ts vendored

File diff suppressed because it is too large Load Diff

4108
dist/languages/fr.ts vendored

File diff suppressed because it is too large Load Diff

4098
dist/languages/hu.ts vendored

File diff suppressed because it is too large Load Diff

4078
dist/languages/id.ts vendored

File diff suppressed because it is too large Load Diff

4100
dist/languages/it.ts vendored

File diff suppressed because it is too large Load Diff

4094
dist/languages/ja_JP.ts vendored

File diff suppressed because it is too large Load Diff

4096
dist/languages/ko_KR.ts vendored

File diff suppressed because it is too large Load Diff

4100
dist/languages/nb.ts vendored

File diff suppressed because it is too large Load Diff

4096
dist/languages/nl.ts vendored

File diff suppressed because it is too large Load Diff

4098
dist/languages/pl.ts vendored

File diff suppressed because it is too large Load Diff

4106
dist/languages/pt_BR.ts vendored

File diff suppressed because it is too large Load Diff

4106
dist/languages/pt_PT.ts vendored

File diff suppressed because it is too large Load Diff

4106
dist/languages/ru_RU.ts vendored

File diff suppressed because it is too large Load Diff

4068
dist/languages/sv.ts vendored

File diff suppressed because it is too large Load Diff

4094
dist/languages/tr_TR.ts vendored

File diff suppressed because it is too large Load Diff

4096
dist/languages/uk.ts vendored

File diff suppressed because it is too large Load Diff

4096
dist/languages/vi.ts vendored

File diff suppressed because it is too large Load Diff

4096
dist/languages/vi_VN.ts vendored

File diff suppressed because it is too large Load Diff

4112
dist/languages/zh_CN.ts vendored

File diff suppressed because it is too large Load Diff

4110
dist/languages/zh_TW.ts vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,5 +1,5 @@
<!--
SPDX-FileCopyrightText: 2018 yuzu Emulator Project
SPDX-FileCopyrightText: 2018 yuzu Emulator Project & 2024 suyu Emulator Project
SPDX-License-Identifier: GPL-2.0-or-later
-->
@ -18,7 +18,7 @@ SPDX-License-Identifier: GPL-2.0-or-later
<file alias="48x48/sd_card.png">icons/48x48/sd_card.png</file>
<file alias="48x48/star.png">icons/48x48/star.png</file>
<file alias="256x256/plus_folder.png">icons/256x256/plus_folder.png</file>
<file alias="256x256/yuzu.png">icons/256x256/yuzu.png</file>
<file alias="256x256/suyu.png">icons/256x256/suyu.png</file>
</qresource>
<qresource prefix="default">
<file>style.qss</file>

View File

Before

Width:  |  Height:  |  Size: 12 KiB

After

Width:  |  Height:  |  Size: 12 KiB

55
dist/yuzu.svg vendored
View File

@ -1,55 +0,0 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg
width="512.0px"
height="512.0px"
viewBox="0 0 512.0 512.0"
version="1.1"
id="SVGRoot"
sodipodi:docname="yuzu.svg"
inkscape:version="1.2.2 (b0a8486541, 2022-12-01)"
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
xmlns="http://www.w3.org/2000/svg"
xmlns:svg="http://www.w3.org/2000/svg">
<sodipodi:namedview
id="namedview532"
pagecolor="#ffffff"
bordercolor="#000000"
borderopacity="0.25"
inkscape:showpageshadow="2"
inkscape:pageopacity="0.0"
inkscape:pagecheckerboard="0"
inkscape:deskcolor="#d1d1d1"
inkscape:document-units="px"
showgrid="true"
inkscape:zoom="4.7521782"
inkscape:cx="300.91464"
inkscape:cy="437.37838"
inkscape:window-width="2048"
inkscape:window-height="1080"
inkscape:window-x="0"
inkscape:window-y="0"
inkscape:window-maximized="1"
inkscape:current-layer="layer1">
<inkscape:grid
type="xygrid"
id="grid538" />
</sodipodi:namedview>
<defs
id="defs527" />
<g
inkscape:label="Layer 1"
inkscape:groupmode="layer"
id="layer1">
<path
d="m 394.62535,471.3827 c 12.708,-22.807 19.949,-49.07 19.949,-77.014 0,-87.537 -71.054,-158.582 -158.591,-158.582 -65.023,0 -117.8,-52.777 -117.8,-117.806 0,-65.029789 52.777,-117.8059899 117.8,-117.8059899 141.321,0 256.008,114.6879899 256.008,255.9999899 0,90.235 -46.773,169.613 -117.366,215.208 z M 255.98335,52.936011 c -11.96,0 -21.676,9.7148 -21.676,21.6816 0,11.9655 9.716,21.681597 21.676,21.681597 11.977,0 21.681,-9.716097 21.681,-21.681597 0,-11.9668 -9.704,-21.6816 -21.681,-21.6816 z m 43.363,43.363197 c -11.964,0 -21.682,9.714492 -21.682,21.681492 0,11.966 9.718,21.682 21.682,21.682 11.977,0 21.681,-9.716 21.681,-21.682 0,-11.967 -9.704,-21.681492 -21.681,-21.681492 z m -86.72,0 c -11.966,0 -21.68,9.714492 -21.68,21.681492 0,11.966 9.714,21.682 21.68,21.682 11.966,0 21.681,-9.716 21.681,-21.682 0,-11.967 -9.715,-21.681492 -21.681,-21.681492 z m 43.357,43.363492 c -11.96,0 -21.676,9.715 -21.676,21.68 0,11.967 9.716,21.682 21.676,21.682 11.977,0 21.681,-9.715 21.681,-21.682 0,-11.965 -9.704,-21.68 -21.681,-21.68 z"
fill="#ff3554"
id="path60" />
<path
d="m 117.35235,40.966411 c -12.704,22.8077 -19.943696,49.070597 -19.943696,77.014289 0,87.537 71.043696,158.582 158.574696,158.582 65.03,0 117.813,52.777 117.813,117.806 0,65.028 -52.783,117.806 -117.813,117.806 -141.305,0 -255.9919924,-114.688 -255.9919924,-256 0,-90.234 46.7638004,-169.614589 117.3609924,-215.208289 z m 138.631,288.357289 c -11.96,0 -21.676,9.716 -21.676,21.682 0,11.967 9.716,21.681 21.676,21.681 11.977,0 21.681,-9.714 21.681,-21.681 0,-11.966 -9.704,-21.682 -21.681,-21.682 z m 43.363,43.363 c -11.964,0 -21.682,9.715 -21.682,21.682 0,11.967 9.718,21.682 21.682,21.682 11.977,0 21.681,-9.715 21.681,-21.682 0,-11.967 -9.704,-21.682 -21.681,-21.682 z m -43.363,43.364 c -11.96,0 -21.676,9.714 -21.676,21.681 0,11.966 9.716,21.682 21.676,21.682 11.977,0 21.681,-9.716 21.681,-21.682 0,-11.967 -9.704,-21.681 -21.681,-21.681 z m -43.358,-43.364 c -11.965,0 -21.68,9.715 -21.68,21.682 0,11.967 9.715,21.682 21.68,21.682 11.967,0 21.682,-9.715 21.682,-21.682 0,-11.967 -9.715,-21.682 -21.682,-21.682 z"
fill="#3a99ff"
id="path62" />
</g>
</svg>

Before

Width:  |  Height:  |  Size: 3.4 KiB

View File

@ -1,4 +1,4 @@
# SPDX-FileCopyrightText: 2016 Citra Emulator Project
# SPDX-FileCopyrightText: 2016 Citra Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
# Dynarmic has cmake_minimum_required(3.12) and we may want to override
@ -63,11 +63,11 @@ if (ENABLE_LIBUSB AND NOT TARGET libusb::usb)
endif()
# SDL2
if (YUZU_USE_EXTERNAL_SDL2)
if (SUYU_USE_EXTERNAL_SDL2)
if (NOT WIN32)
# Yuzu itself needs: Atomic Audio Events Joystick Haptic Sensor Threads Timers
# Suyu itself needs: Atomic Audio Events Joystick Haptic Sensor Threads Timers
# Since 2.0.18 Atomic+Threads required for HIDAPI/libusb (see https://github.com/libsdl-org/SDL/issues/5095)
# Yuzu-cmd also needs: Video (depends on Loadso/Dlopen)
# Suyu-cmd also needs: Video (depends on Loadso/Dlopen)
# CPUinfo also required for SDL Audio, at least until 2.28.0 (see https://github.com/libsdl-org/SDL/issues/7809)
set(SDL_UNUSED_SUBSYSTEMS
File Filesystem
@ -142,7 +142,7 @@ if (NOT TARGET Opus::opus)
endif()
# FFMpeg
if (YUZU_USE_BUNDLED_FFMPEG)
if (SUYU_USE_BUNDLED_FFMPEG)
add_subdirectory(ffmpeg)
set(FFmpeg_PATH "${FFmpeg_PATH}" PARENT_SCOPE)
set(FFmpeg_LDFLAGS "${FFmpeg_LDFLAGS}" PARENT_SCOPE)
@ -151,12 +151,12 @@ if (YUZU_USE_BUNDLED_FFMPEG)
endif()
# Vulkan-Headers
if (YUZU_USE_EXTERNAL_VULKAN_HEADERS)
if (SUYU_USE_EXTERNAL_VULKAN_HEADERS)
add_subdirectory(Vulkan-Headers)
endif()
# Vulkan-Utility-Libraries
if (YUZU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES)
if (SUYU_USE_EXTERNAL_VULKAN_UTILITY_LIBRARIES)
add_subdirectory(Vulkan-Utility-Libraries)
endif()
@ -210,7 +210,7 @@ endif()
# Breakpad
# https://github.com/microsoft/vcpkg/blob/master/ports/breakpad/CMakeLists.txt
if (YUZU_CRASH_DUMPS AND NOT TARGET libbreakpad_client)
if (SUYU_CRASH_DUMPS AND NOT TARGET libbreakpad_client)
set(BREAKPAD_WIN32_DEFINES
NOMINMAX
UNICODE

View File

@ -143,7 +143,7 @@ if (NOT WIN32 AND NOT ANDROID)
)
endif()
# `configure` parameters builds only exactly what yuzu needs from FFmpeg
# `configure` parameters builds only exactly what suyu needs from FFmpeg
# `--disable-vdpau` is needed to avoid linking issues
set(FFmpeg_CC ${CMAKE_C_COMPILER_LAUNCHER} ${CMAKE_C_COMPILER})
set(FFmpeg_CXX ${CMAKE_CXX_COMPILER_LAUNCHER} ${CMAKE_CXX_COMPILER})
@ -222,7 +222,7 @@ if (NOT WIN32 AND NOT ANDROID)
message(FATAL_ERROR "FFmpeg not found")
endif()
elseif(ANDROID)
# Use yuzu FFmpeg binaries
# Use suyu FFmpeg binaries
if (ARCHITECTURE_arm64)
set(FFmpeg_EXT_NAME "ffmpeg-android-v5.1.LTS-aarch64")
elseif (ARCHITECTURE_x86_64)
@ -253,7 +253,7 @@ elseif(ANDROID)
set(FFmpeg_LIBRARIES "${FFmpeg_LIBRARIES}" PARENT_SCOPE)
set(FFmpeg_INCLUDE_DIR "${FFmpeg_INCLUDE_DIR}" PARENT_SCOPE)
elseif(WIN32)
# Use yuzu FFmpeg binaries
# Use suyu FFmpeg binaries
set(FFmpeg_EXT_NAME "ffmpeg-6.0")
set(FFmpeg_PATH "${CMAKE_BINARY_DIR}/externals/${FFmpeg_EXT_NAME}")
download_bundled_external("ffmpeg/" ${FFmpeg_EXT_NAME} "")

View File

@ -32,7 +32,7 @@ set(NX_TZDB_ARCHIVE "${CMAKE_CURRENT_BINARY_DIR}/${NX_TZDB_VERSION}.zip")
set(NX_TZDB_ROMFS_DIR "${CMAKE_CURRENT_BINARY_DIR}/nx_tzdb")
if ((NOT CAN_BUILD_NX_TZDB OR YUZU_DOWNLOAD_TIME_ZONE_DATA) AND NOT EXISTS ${NX_TZDB_ROMFS_DIR})
if ((NOT CAN_BUILD_NX_TZDB OR SUYU_DOWNLOAD_TIME_ZONE_DATA) AND NOT EXISTS ${NX_TZDB_ROMFS_DIR})
set(NX_TZDB_DOWNLOAD_URL "https://github.com/lat9nq/tzdb_to_nx/releases/download/${NX_TZDB_VERSION}/${NX_TZDB_VERSION}.zip")
message(STATUS "Downloading time zone data from ${NX_TZDB_DOWNLOAD_URL}...")
@ -48,7 +48,7 @@ if ((NOT CAN_BUILD_NX_TZDB OR YUZU_DOWNLOAD_TIME_ZONE_DATA) AND NOT EXISTS ${NX_
${NX_TZDB_ARCHIVE}
DESTINATION
${NX_TZDB_ROMFS_DIR})
elseif (CAN_BUILD_NX_TZDB AND NOT YUZU_DOWNLOAD_TIME_ZONE_DATA)
elseif (CAN_BUILD_NX_TZDB AND NOT SUYU_DOWNLOAD_TIME_ZONE_DATA)
add_subdirectory(tzdb_to_nx)
add_dependencies(nx_tzdb x80e)

View File

@ -3,7 +3,7 @@
# SPDX-FileCopyrightText: 2015 Citra Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
# Enforce yuzu's whitespace policy
# Enforce suyu's whitespace policy
git config --local core.whitespace tab-in-indent,trailing-space
paths_to_check="src/ CMakeLists.txt"

View File

@ -1,4 +1,4 @@
# SPDX-FileCopyrightText: 2018 yuzu Emulator Project
# SPDX-FileCopyrightText: 2018 yuzu Emulator Project & 2024 suyu Emulator Project
# SPDX-License-Identifier: GPL-2.0-or-later
# Enable modules to include each other's files
@ -88,7 +88,7 @@ if (MSVC)
/wd4702 # unreachable code (when used with LTO)
)
if (USE_CCACHE OR YUZU_USE_PRECOMPILED_HEADERS)
if (USE_CCACHE OR SUYU_USE_PRECOMPILED_HEADERS)
# when caching, we need to use /Z7 to downgrade debug info to use an older but more cacheable format
# Precompiled headers are deleted if not using /Z7. See https://github.com/nanoant/CMakePCHCompiler/issues/21
add_compile_options(/Z7)
@ -192,20 +192,20 @@ add_subdirectory(input_common)
add_subdirectory(frontend_common)
add_subdirectory(shader_recompiler)
if (YUZU_ROOM)
if (SUYU_ROOM)
add_subdirectory(dedicated_room)
endif()
if (YUZU_TESTS)
if (SUYU_TESTS)
add_subdirectory(tests)
endif()
if (ENABLE_SDL2)
add_subdirectory(yuzu_cmd)
add_subdirectory(suyu_cmd)
endif()
if (ENABLE_QT)
add_subdirectory(yuzu)
add_subdirectory(suyu)
endif()
if (ENABLE_WEB_SERVICE)
@ -214,5 +214,5 @@ endif()
if (ANDROID)
add_subdirectory(android/app/src/main/jni)
target_include_directories(yuzu-android PRIVATE android/app/src/main)
target_include_directories(suyu-android PRIVATE android/app/src/main)
endif()

View File

@ -172,9 +172,9 @@ android {
"-DENABLE_WEB_SERVICE=0", // Don't use telemetry
"-DBUNDLE_SPEEX=ON",
"-DANDROID_ARM_NEON=true", // cryptopp requires Neon to work
"-DYUZU_USE_BUNDLED_VCPKG=ON",
"-DYUZU_USE_BUNDLED_FFMPEG=ON",
"-DYUZU_ENABLE_LTO=ON",
"-DSUYU_USE_BUNDLED_VCPKG=ON",
"-DSUYU_USE_BUNDLED_FFMPEG=ON",
"-DSUYU_ENABLE_LTO=ON",
"-DCMAKE_EXPORT_COMPILE_COMMANDS=ON"
)

View File

@ -262,7 +262,7 @@ if (ANDROID)
target_compile_definitions(audio_core PRIVATE HAVE_OBOE)
endif()
if (YUZU_USE_PRECOMPILED_HEADERS)
if (SUYU_USE_PRECOMPILED_HEADERS)
target_precompile_headers(audio_core PRIVATE precompiled_headers.h)
endif()

View File

@ -1,4 +1,4 @@
// SPDX-FileCopyrightText: Copyright 2018 yuzu Emulator Project
// SPDX-FileCopyrightText: Copyright 2018 yuzu Emulator Project & 2024 suyu Emulator Project
// SPDX-License-Identifier: GPL-2.0-or-later
#include <span>
@ -208,7 +208,7 @@ CubebSink::CubebSink(std::string_view target_device_name) {
com_init_result = CoInitializeEx(nullptr, COINIT_MULTITHREADED);
#endif
if (cubeb_init(&ctx, "yuzu", nullptr) != CUBEB_OK) {
if (cubeb_init(&ctx, "suyu", nullptr) != CUBEB_OK) {
LOG_CRITICAL(Audio_Sink, "cubeb_init failed");
return;
}
@ -304,7 +304,7 @@ std::vector<std::string> ListCubebSinkDevices(bool capture) {
auto com_init_result = CoInitializeEx(nullptr, COINIT_MULTITHREADED);
#endif
if (cubeb_init(&ctx, "yuzu Device Enumerator", nullptr) != CUBEB_OK) {
if (cubeb_init(&ctx, "suyu Device Enumerator", nullptr) != CUBEB_OK) {
LOG_CRITICAL(Audio_Sink, "cubeb_init failed");
return {};
}
@ -352,7 +352,7 @@ bool IsCubebSuitable() {
#endif
// Init cubeb
if (cubeb_init(&ctx, "yuzu Latency Getter", nullptr) != CUBEB_OK) {
if (cubeb_init(&ctx, "suyu Latency Getter", nullptr) != CUBEB_OK) {
LOG_ERROR(Audio_Sink, "Cubeb failed to init, it is not suitable.");
return false;
}
@ -386,7 +386,7 @@ bool IsCubebSuitable() {
// Test opening a device with standard parameters
cubeb_devid output_device{0};
cubeb_devid input_device{0};
std::string name{"Yuzu test"};
std::string name{"Suyu test"};
cubeb_stream* stream{nullptr};
if (cubeb_stream_init(ctx, &stream, name.c_str(), input_device, nullptr, output_device, &params,

View File

@ -1,4 +1,4 @@
// SPDX-FileCopyrightText: Copyright 2018 yuzu Emulator Project
// SPDX-FileCopyrightText: Copyright 2018 yuzu Emulator Project & 2024 suyu Emulator Project
// SPDX-License-Identifier: GPL-2.0-or-later
#include <array>
@ -32,11 +32,11 @@ void SinkStream::AppendBuffer(SinkBuffer& buffer, std::span<s16> samples) {
constexpr s32 min{std::numeric_limits<s16>::min()};
constexpr s32 max{std::numeric_limits<s16>::max()};
auto yuzu_volume{Settings::Volume()};
if (yuzu_volume > 1.0f) {
yuzu_volume = 0.6f + 20 * std::log10(yuzu_volume);
auto suyu_volume{Settings::Volume()};
if (suyu_volume > 1.0f) {
suyu_volume = 0.6f + 20 * std::log10(suyu_volume);
}
auto volume{system_volume * device_volume * yuzu_volume};
auto volume{system_volume * device_volume * suyu_volume};
if (system_channels == 6 && device_channels == 2) {
// We're given 6 channels, but our device only outputs 2, so downmix.

View File

@ -262,7 +262,7 @@ if (ANDROID)
target_link_libraries(common PRIVATE android)
endif()
if (YUZU_USE_PRECOMPILED_HEADERS)
if (SUYU_USE_PRECOMPILED_HEADERS)
target_precompile_headers(common PRIVATE precompiled_headers.h)
endif()

View File

@ -1,4 +1,4 @@
// SPDX-FileCopyrightText: Copyright 2023 yuzu Emulator Project
// SPDX-FileCopyrightText: Copyright 2023 yuzu Emulator Project & 2024 suyu Emulator Project
// SPDX-License-Identifier: GPL-2.0-or-later
#include <map>
@ -253,19 +253,19 @@ void AndroidKeyboard::SubmitNormalText(const ResultData& data) const {
void InitJNI(JNIEnv* env) {
s_software_keyboard_class = reinterpret_cast<jclass>(
env->NewGlobalRef(env->FindClass("org/yuzu/yuzu_emu/applets/keyboard/SoftwareKeyboard")));
env->NewGlobalRef(env->FindClass("org/suyu/suyu_emu/applets/keyboard/SoftwareKeyboard")));
s_keyboard_config_class = reinterpret_cast<jclass>(env->NewGlobalRef(
env->FindClass("org/yuzu/yuzu_emu/applets/keyboard/SoftwareKeyboard$KeyboardConfig")));
env->FindClass("org/suyu/suyu_emu/applets/keyboard/SoftwareKeyboard$KeyboardConfig")));
s_keyboard_data_class = reinterpret_cast<jclass>(env->NewGlobalRef(
env->FindClass("org/yuzu/yuzu_emu/applets/keyboard/SoftwareKeyboard$KeyboardData")));
env->FindClass("org/suyu/suyu_emu/applets/keyboard/SoftwareKeyboard$KeyboardData")));
s_swkbd_execute_normal = env->GetStaticMethodID(
s_software_keyboard_class, "executeNormal",
"(Lorg/yuzu/yuzu_emu/applets/keyboard/SoftwareKeyboard$KeyboardConfig;)Lorg/yuzu/yuzu_emu/"
"(Lorg/suyu/suyu_emu/applets/keyboard/SoftwareKeyboard$KeyboardConfig;)Lorg/suyu/suyu_emu/"
"applets/keyboard/SoftwareKeyboard$KeyboardData;");
s_swkbd_execute_inline = env->GetStaticMethodID(
s_software_keyboard_class, "executeInline",
"(Lorg/yuzu/yuzu_emu/applets/keyboard/SoftwareKeyboard$KeyboardConfig;)V");
"(Lorg/suyu/suyu_emu/applets/keyboard/SoftwareKeyboard$KeyboardConfig;)V");
}
void CleanupJNI(JNIEnv* env) {

Some files were not shown because too many files have changed in this diff Show More