FEX-Emu/FEX
1
0
Fork 0
mirror of https://github.com/FEX-Emu/FEX.git synced 2024-12-14 01:18:46 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
e2457943f5
FEX/FEXCore/Source/CMakeLists.txt
Ryan Houdek acbd920c9a OpcodeDispatcher: Adds initial groundwork for decomposed AVX operations 
Only installs the tables if SVE256 isn't supported yet AVX is explicitly
enabled with HostFeatures, to protect accidental enablement early.

- Only implements 85 instructions starting out
- Basic vector moves
- Basic vector unary operations
- Basic vector binary operations
- VZeroUpper/VZeroAll

The bulk of the implementation is currently the handling for loading and
storing the halves of the registers from the context or from memory.

This means the load/store helpers must always return a pair unless only
requesting the bottom half of the register, which occurs with 128-bit
AVX operations. The store side then needing to consume the named zero
register if it occurs since those cases will zero the upper bits.

This implementation approach has a few benefits.
- I can pound this out extremely quickly
- SSE implementations are unaffected and don't need to deal with the
  insert behaviour of SVE256.
- We still keep the SVE256 implementation for the inevitable future when
  hardware vendors actually do implement it (Give it 8 years or
  something).
- We can actually unit test this path in CI once it is complete.
- We can partially optimize some paths with SVE128 (Gathers) and support
  a full ASIMD path if necessary.

One downside is that I can't enable this in CI yet because it can't pass
all unittests. but that's a non-issue since it is going to be in heavy
flux as I'm hammering out the implementation. It'll get switched on at
the end when it's passing all 1265 AVX unittests. Currently at 1001 on
this.
2024-06-20 08:44:14 -04:00

398 lines
13 KiB
CMake
Raw Blame History

set (MAN_DIR share/man CACHE PATH "MAN_DIR")
set (FEXCORE_BASE_SRCS
Interface/Config/Config.cpp
Utils/Allocator.cpp
Utils/CPUInfo.cpp
Utils/FileLoading.cpp
Utils/ForcedAssert.cpp
Utils/LogManager.cpp
Utils/SpinWaitLock.cpp
)
if (NOT MINGW_BUILD)
list(APPEND FEXCORE_BASE_SRCS
Utils/Allocator/64BitAllocator.cpp)
endif()
set (SRCS
Common/JitSymbols.cpp
Common/SoftFloat-3e/extF80_add.c
Common/SoftFloat-3e/extF80_div.c
Common/SoftFloat-3e/extF80_sub.c
Common/SoftFloat-3e/extF80_mul.c
Common/SoftFloat-3e/extF80_rem.c
Common/SoftFloat-3e/extF80_sqrt.c
Common/SoftFloat-3e/s_add128.c
Common/SoftFloat-3e/s_sub128.c
Common/SoftFloat-3e/s_le128.c
Common/SoftFloat-3e/extF80_to_i32.c
Common/SoftFloat-3e/extF80_to_i64.c
Common/SoftFloat-3e/extF80_to_ui64.c
Common/SoftFloat-3e/extF80_to_f32.c
Common/SoftFloat-3e/extF80_to_f64.c
Common/SoftFloat-3e/i32_to_extF80.c
Common/SoftFloat-3e/ui64_to_extF80.c
Common/SoftFloat-3e/extF80_to_f128.c
Common/SoftFloat-3e/f128_to_extF80.c
Common/SoftFloat-3e/s_roundToUI64.c
Common/SoftFloat-3e/s_f128UIToCommonNaN.c
Common/SoftFloat-3e/s_commonNaNToF128UI.c
Common/SoftFloat-3e/s_shortShiftRight128.c
Common/SoftFloat-3e/s_normSubnormalF128Sig.c
Common/SoftFloat-3e/s_roundToI32.c
Common/SoftFloat-3e/s_roundToI64.c
Common/SoftFloat-3e/s_roundPackToF32.c
Common/SoftFloat-3e/s_addMagsExtF80.c
Common/SoftFloat-3e/s_extF80UIToCommonNaN.c
Common/SoftFloat-3e/s_commonNaNToF32UI.c
Common/SoftFloat-3e/s_commonNaNToF64UI.c
Common/SoftFloat-3e/s_shortShiftRightJam64.c
Common/SoftFloat-3e/s_shortShiftRightJam64Extra.c
Common/SoftFloat-3e/s_shiftRightJam64Extra.c
Common/SoftFloat-3e/s_shortShiftRightJam64Extra.c
Common/SoftFloat-3e/s_roundPackToF64.c
Common/SoftFloat-3e/s_propagateNaNExtF80UI.c
Common/SoftFloat-3e/s_roundPackToExtF80.c
Common/SoftFloat-3e/s_normSubnormalExtF80Sig.c
Common/SoftFloat-3e/s_shiftRightJam64.c
Common/SoftFloat-3e/s_subMagsExtF80.c
Common/SoftFloat-3e/s_shiftRightJam32.c
Common/SoftFloat-3e/s_shiftRightJam128.c
Common/SoftFloat-3e/s_shiftRightJam128Extra.c
Common/SoftFloat-3e/s_normRoundPackToExtF80.c
Common/SoftFloat-3e/s_shortShiftLeft128.c
Common/SoftFloat-3e/s_approxRecip32_1.c
Common/SoftFloat-3e/s_approxRecip_1Ks.c
Common/SoftFloat-3e/s_approxRecipSqrt32_1.c
Common/SoftFloat-3e/s_approxRecipSqrt_1Ks.c
Common/SoftFloat-3e/softfloat_raiseFlags.c
Common/SoftFloat-3e/softfloat_state.c
Common/SoftFloat-3e/f64_to_extF80.c
Common/SoftFloat-3e/s_commonNaNToExtF80UI.c
Common/SoftFloat-3e/s_normSubnormalF64Sig.c
Common/SoftFloat-3e/s_f64UIToCommonNaN.c
Common/SoftFloat-3e/extF80_roundToInt.c
Common/SoftFloat-3e/extF80_eq.c
Common/SoftFloat-3e/extF80_lt.c
Common/SoftFloat-3e/s_lt128.c
Common/SoftFloat-3e/s_mul64ByShifted32To128.c
Common/SoftFloat-3e/s_mul64To128.c
Common/SoftFloat-3e/s_countLeadingZeros8.c
Common/SoftFloat-3e/s_countLeadingZeros32.c
Common/SoftFloat-3e/s_countLeadingZeros64.c
Common/SoftFloat-3e/f32_to_extF80.c
Common/SoftFloat-3e/s_normSubnormalF32Sig.c
Common/SoftFloat-3e/s_f32UIToCommonNaN.c
Interface/Context/Context.cpp
Interface/Core/LookupCache.cpp
Interface/Core/BlockSamplingData.cpp
Interface/Core/Core.cpp
Interface/Core/CPUBackend.cpp
Interface/Core/CPUID.cpp
Interface/Core/Frontend.cpp
Interface/Core/HostFeatures.cpp
Interface/Core/ObjectCache/JobHandling.cpp
Interface/Core/ObjectCache/NamedRegionObjectHandler.cpp
Interface/Core/ObjectCache/ObjectCacheService.cpp
Interface/Core/OpcodeDispatcher/AVX_128.cpp
Interface/Core/OpcodeDispatcher/Crypto.cpp
Interface/Core/OpcodeDispatcher/Flags.cpp
Interface/Core/OpcodeDispatcher/Vector.cpp
Interface/Core/OpcodeDispatcher/X87.cpp
Interface/Core/OpcodeDispatcher/X87F64.cpp
Interface/Core/OpcodeDispatcher.cpp
Interface/Core/X86Tables.cpp
Interface/Core/X86HelperGen.cpp
Interface/Core/ArchHelpers/Arm64Emitter.cpp
Interface/Core/Dispatcher/Dispatcher.cpp
Interface/Core/Interpreter/Fallbacks/InterpreterFallbacks.cpp
Interface/Core/JIT/Arm64/JIT.cpp
Interface/Core/JIT/Arm64/ALUOps.cpp
Interface/Core/JIT/Arm64/AtomicOps.cpp
Interface/Core/JIT/Arm64/BranchOps.cpp
Interface/Core/JIT/Arm64/ConversionOps.cpp
Interface/Core/JIT/Arm64/EncryptionOps.cpp
Interface/Core/JIT/Arm64/FlagOps.cpp
Interface/Core/JIT/Arm64/MemoryOps.cpp
Interface/Core/JIT/Arm64/MiscOps.cpp
Interface/Core/JIT/Arm64/MoveOps.cpp
Interface/Core/JIT/Arm64/VectorOps.cpp
Interface/Core/JIT/Arm64/Arm64Relocations.cpp
Interface/Core/X86Tables/BaseTables.cpp
Interface/Core/X86Tables/DDDTables.cpp
Interface/Core/X86Tables/EVEXTables.cpp
Interface/Core/X86Tables/H0F38Tables.cpp
Interface/Core/X86Tables/H0F3ATables.cpp
Interface/Core/X86Tables/PrimaryGroupTables.cpp
Interface/Core/X86Tables/SecondaryGroupTables.cpp
Interface/Core/X86Tables/SecondaryModRMTables.cpp
Interface/Core/X86Tables/SecondaryTables.cpp
Interface/Core/X86Tables/VEXTables.cpp
Interface/Core/X86Tables/X87Tables.cpp
Interface/Core/X86Tables/XOPTables.cpp
Interface/HLE/Thunks/Thunks.cpp
Interface/GDBJIT/GDBJIT.cpp
Interface/IR/AOTIR.cpp
Interface/IR/IRDumper.cpp
Interface/IR/IREmitter.cpp
Interface/IR/PassManager.cpp
Interface/IR/Passes/ConstProp.cpp
Interface/IR/Passes/DeadContextStoreElimination.cpp
Interface/IR/Passes/IRDumperPass.cpp
Interface/IR/Passes/IRValidation.cpp
Interface/IR/Passes/RAValidation.cpp
Interface/IR/Passes/RedundantFlagCalculationElimination.cpp
Interface/IR/Passes/DeadStoreElimination.cpp
Interface/IR/Passes/RegisterAllocationPass.cpp
Utils/Telemetry.cpp
Utils/Threads.cpp
Utils/Profiler.cpp
)
if (_M_ARM_64)
list(APPEND SRCS Utils/ArchHelpers/Arm64.cpp)
else()
list(APPEND SRCS Utils/ArchHelpers/Arm64_stubs.cpp)
endif()
if (ENABLE_GLIBC_ALLOCATOR_HOOK_FAULT)
list(APPEND FEXCORE_BASE_SRCS
Utils/AllocatorOverride.cpp)
endif()
set(DEFINES -DTHREAD_LOCAL=_Thread_local -DJIT_ARM64)
if (_M_X86_64)
list(APPEND DEFINES -D_M_X86_64=1)
endif()
if (_M_ARM_64)
list(APPEND DEFINES -D_M_ARM_64=1)
endif()
if (ENABLE_VIXL_SIMULATOR)
# We can run the simulator on both x86-64 or AArch64 hosts
list(APPEND DEFINES -DVIXL_SIMULATOR=1 -DVIXL_INCLUDE_SIMULATOR_AARCH64=1)
endif()
if (ENABLE_VIXL_DISASSEMBLER)
list(APPEND DEFINES -DVIXL_DISASSEMBLER=1)
endif()
if (_M_ARM_64 AND HAS_CLANG_PRESERVE_ALL)
list(APPEND DEFINES "-DFEXCORE_PRESERVE_ALL_ATTR=__attribute__((preserve_all));-DFEXCORE_HAS_PRESERVE_ALL_ATTR=1")
else()
list(APPEND DEFINES "-DFEXCORE_PRESERVE_ALL_ATTR=;-DFEXCORE_HAS_PRESERVE_ALL_ATTR=0")
endif()
# Some defines for the softfloat library
list(APPEND DEFINES "-DSOFTFLOAT_BUILTIN_CLZ")
set (LIBS fmt::fmt vixl xxHash::xxhash FEXHeaderUtils CodeEmitter)
if (NOT MINGW_BUILD)
list (APPEND LIBS dl)
else()
list (APPEND LIBS synchronization)
if (_M_ARM_64EC)
list (APPEND LIBS kernelbase)
endif()
endif()
if (ENABLE_JEMALLOC)
list (APPEND LIBS FEX_jemalloc)
endif()
if (ENABLE_JEMALLOC_GLIBC_ALLOC)
list (APPEND LIBS FEX_jemalloc_glibc)
endif()
# Generate config
configure_file(
${CMAKE_CURRENT_SOURCE_DIR}/Interface/Config/Config.json.in
${CMAKE_BINARY_DIR}/generated/Config/Config.json)
# Generate IR include file
set(OUTPUT_IR_FOLDER "${CMAKE_BINARY_DIR}/include/FEXCore/IR")
set(OUTPUT_NAME "${OUTPUT_IR_FOLDER}/IRDefines.inc")
set(OUTPUT_DISPATCHER_NAME "${OUTPUT_IR_FOLDER}/IRDefines_Dispatch.inc")
set(INPUT_NAME "${CMAKE_CURRENT_SOURCE_DIR}/Interface/IR/IR.json")
file(MAKE_DIRECTORY "${OUTPUT_IR_FOLDER}")
add_custom_command(
OUTPUT "${OUTPUT_NAME}" "${OUTPUT_DISPATCHER_NAME}"
DEPENDS "${INPUT_NAME}"
DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/../Scripts/json_ir_generator.py"
COMMAND "python3" "${CMAKE_CURRENT_SOURCE_DIR}/../Scripts/json_ir_generator.py" "${INPUT_NAME}" "${OUTPUT_NAME}" "${OUTPUT_DISPATCHER_NAME}"
)
set_source_files_properties(${OUTPUT_NAME} PROPERTIES
GENERATED TRUE)
# Generate IR documentation
set(OUTPUT_IR_DOC "${CMAKE_BINARY_DIR}/IR.md")
add_custom_command(
OUTPUT "${OUTPUT_IR_DOC}"
DEPENDS "${INPUT_NAME}"
DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/../Scripts/json_ir_doc_generator.py"
COMMAND "python3" "${CMAKE_CURRENT_SOURCE_DIR}/../Scripts/json_ir_doc_generator.py" "${INPUT_NAME}" "${OUTPUT_IR_DOC}"
)
set_source_files_properties(${OUTPUT_IR_NAME} PROPERTIES
GENERATED TRUE)
# Create the target
add_custom_target(IR_INC
DEPENDS "${OUTPUT_NAME}"
DEPENDS "${OUTPUT_IR_DOC}")
# Generate the configuration include file
set(OUTPUT_CONFIG_FOLDER "${CMAKE_BINARY_DIR}/include/FEXCore/Config")
set(OUTPUT_CONFIG_NAME "${OUTPUT_CONFIG_FOLDER}/ConfigValues.inl")
set(OUTPUT_CONFIG_OPTION_NAME "${OUTPUT_CONFIG_FOLDER}/ConfigOptions.inl")
set(INPUT_CONFIG_NAME "${CMAKE_BINARY_DIR}/generated/Config/Config.json")
set(OUTPUT_MAN_NAME "${CMAKE_BINARY_DIR}/generated/FEX.1")
set(OUTPUT_MAN_NAME_COMPRESS "${CMAKE_BINARY_DIR}/generated/FEX.1.gz")
file(MAKE_DIRECTORY "${OUTPUT_CONFIG_FOLDER}")
add_custom_command(
OUTPUT "${OUTPUT_CONFIG_NAME}"
OUTPUT "${OUTPUT_CONFIG_OPTION_NAME}"
OUTPUT "${OUTPUT_MAN_NAME}"
DEPENDS "${INPUT_CONFIG_NAME}"
DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/../Scripts/config_generator.py"
COMMAND "python3" "${CMAKE_CURRENT_SOURCE_DIR}/../Scripts/config_generator.py" "${INPUT_CONFIG_NAME}" "${OUTPUT_CONFIG_NAME}" "${OUTPUT_MAN_NAME}"
"${OUTPUT_CONFIG_OPTION_NAME}"
)
add_custom_command(
OUTPUT "${OUTPUT_MAN_NAME_COMPRESS}"
DEPENDS "${OUTPUT_MAN_NAME}"
COMMAND "gzip" "-kf9n" "${OUTPUT_MAN_NAME}"
)
set_source_files_properties(${OUTPUT_CONFIG_NAME} PROPERTIES
GENERATED TRUE)
set_source_files_properties(${OUTPUT_CONFIG_OPTION_NAME} PROPERTIES
GENERATED TRUE)
set_source_files_properties(${OUTPUT_MAN_NAME} PROPERTIES
GENERATED TRUE)
set_source_files_properties(${OUTPUT_MAN_NAME_COMPRESS} PROPERTIES
GENERATED TRUE)
# Create the target
add_custom_target(CONFIG_INC
DEPENDS "${OUTPUT_CONFIG_NAME}"
DEPENDS "${OUTPUT_CONFIG_OPTION_NAME}"
DEPENDS "${OUTPUT_MAN_NAME}"
DEPENDS "${OUTPUT_MAN_NAME_COMPRESS}")
# Install the compressed man page
install(FILES ${OUTPUT_MAN_NAME_COMPRESS} DESTINATION ${MAN_DIR}/man1)
# Add in diagnostic colours if the option is available.
# Ninja code generator will kill colours if this isn't here
check_cxx_compiler_flag(-fdiagnostics-color=always GCC_COLOR)
check_cxx_compiler_flag(-fcolor-diagnostics CLANG_COLOR)
function(AddDefaultOptionsToTarget Name)
set_target_properties(${Name} PROPERTIES C_VISIBILITY_PRESET hidden)
set_target_properties(${Name} PROPERTIES CXX_VISIBILITY_PRESET hidden)
set_target_properties(${Name} PROPERTIES VISIBILITY_INLINES_HIDDEN TRUE)
target_include_directories(${Name} PUBLIC "${CMAKE_CURRENT_BINARY_DIR}")
target_include_directories(${Name} PRIVATE IncludePrivate/)
target_include_directories(${Name} PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/)
target_include_directories(${Name} PUBLIC "${PROJECT_SOURCE_DIR}/include/")
target_include_directories(${Name} PUBLIC "${CMAKE_BINARY_DIR}/include/")
target_compile_definitions(${Name} PRIVATE ${DEFINES})
add_dependencies(${Name} CONFIG_INC IR_INC)
target_compile_options(${Name}
PRIVATE
-Wall
-Werror=cast-qual
-Werror=ignored-qualifiers
-Werror=implicit-fallthrough
-Wno-trigraphs
-ffunction-sections
-fwrapv
)
if (GCC_COLOR)
target_compile_options(${Name}
PRIVATE
"-fdiagnostics-color=always")
endif()
if (CLANG_COLOR)
target_compile_options(${Name}
PRIVATE
"-fcolor-diagnostics")
endif()
if (CMAKE_BUILD_TYPE MATCHES "RELEASE")
target_link_options(${Name}
PRIVATE
"LINKER:--gc-sections"
"LINKER:--strip-all"
"LINKER:--as-needed"
)
endif()
endfunction()
# Build FEXCore_Config static library
add_library(FEXCore_Base STATIC ${FEXCORE_BASE_SRCS})
target_link_libraries(FEXCore_Base ${LIBS})
AddDefaultOptionsToTarget(FEXCore_Base)
function(AddObject Name Type)
add_library(${Name} ${Type} ${SRCS})
target_link_libraries(${Name} FEXCore_Base)
target_compile_options(${Name} PRIVATE ${FEX_TUNE_COMPILE_FLAGS})
AddDefaultOptionsToTarget(${Name})
set_target_properties(${Name} PROPERTIES OUTPUT_NAME FEXCore)
endfunction()
function(AddLibrary Name Type)
add_library(${Name} ${Type} $<TARGET_OBJECTS:${PROJECT_NAME}_object>)
target_link_libraries(${Name} FEXCore_Base)
target_compile_options(${Name} PRIVATE ${FEX_TUNE_COMPILE_FLAGS})
set_target_properties(${Name} PROPERTIES OUTPUT_NAME FEXCore)
if (MINGW_BUILD)
# Mingw build isn't building a linux shared library, so it can't have a SONAME.
set_target_properties(${Name} PROPERTIES NO_SONAME ON)
# Change the suffixes otherwise cmake continues using .a and .so
if (${Type} STREQUAL SHARED)
set_target_properties(${Name} PROPERTIES SUFFIX ".dll")
elseif(${Type} STREQUAL STATIC)
set_target_properties(${Name} PROPERTIES SUFFIX ".lib")
endif()
endif()
AddDefaultOptionsToTarget(${Name})
endfunction()
AddObject(${PROJECT_NAME}_object OBJECT)
AddLibrary(${PROJECT_NAME} STATIC)
AddLibrary(${PROJECT_NAME}_shared SHARED)
if (NOT MINGW_BUILD)
install(TARGETS ${PROJECT_NAME} ${PROJECT_NAME}_shared
LIBRARY
DESTINATION lib
COMPONENT Libraries
ARCHIVE
DESTINATION lib
COMPONENT Libraries)
endif()
Reference in New Issue View Git Blame Copy Permalink