linux/fs/xfs/xfs_bmap_util.c

1961 lines
52 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* Copyright (c) 2012 Red Hat, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_mount.h"
#include "xfs_da_format.h"
#include "xfs_inode.h"
#include "xfs_btree.h"
#include "xfs_trans.h"
#include "xfs_extfree_item.h"
#include "xfs_alloc.h"
#include "xfs_bmap.h"
#include "xfs_bmap_util.h"
#include "xfs_bmap_btree.h"
#include "xfs_rtalloc.h"
#include "xfs_error.h"
#include "xfs_quota.h"
#include "xfs_trans_space.h"
#include "xfs_trace.h"
#include "xfs_icache.h"
#include "xfs_log.h"
/* Kernel only BMAP related definitions and functions */
/*
* Convert the given file system block to a disk block. We have to treat it
* differently based on whether the file is a real time file or not, because the
* bmap code does.
*/
xfs_daddr_t
xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb)
{
return (XFS_IS_REALTIME_INODE(ip) ? \
(xfs_daddr_t)XFS_FSB_TO_BB((ip)->i_mount, (fsb)) : \
XFS_FSB_TO_DADDR((ip)->i_mount, (fsb)));
}
/*
* Routine to zero an extent on disk allocated to the specific inode.
*
* The VFS functions take a linearised filesystem block offset, so we have to
* convert the sparse xfs fsb to the right format first.
* VFS types are real funky, too.
*/
int
xfs_zero_extent(
struct xfs_inode *ip,
xfs_fsblock_t start_fsb,
xfs_off_t count_fsb)
{
struct xfs_mount *mp = ip->i_mount;
xfs_daddr_t sector = xfs_fsb_to_db(ip, start_fsb);
sector_t block = XFS_BB_TO_FSBT(mp, sector);
ssize_t size = XFS_FSB_TO_B(mp, count_fsb);
if (IS_DAX(VFS_I(ip)))
return dax_clear_blocks(VFS_I(ip), block, size);
/*
* let the block layer decide on the fastest method of
* implementing the zeroing.
*/
return sb_issue_zeroout(mp->m_super, block, count_fsb, GFP_NOFS);
}
/*
* Routine to be called at transaction's end by xfs_bmapi, xfs_bunmapi
* caller. Frees all the extents that need freeing, which must be done
* last due to locking considerations. We never free any extents in
* the first transaction.
*
* Return 1 if the given transaction was committed and a new one
* started, and 0 otherwise in the committed parameter.
*/
int /* error */
xfs_bmap_finish(
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-18 23:51:16 +00:00
struct xfs_trans **tp, /* transaction pointer addr */
struct xfs_bmap_free *flist, /* i/o: list extents to free */
int *committed)/* xact committed or not */
{
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-18 23:51:16 +00:00
struct xfs_efd_log_item *efd; /* extent free data */
struct xfs_efi_log_item *efi; /* extent free intention */
int error; /* error return value */
struct xfs_bmap_free_item *free; /* free extent item */
struct xfs_bmap_free_item *next; /* next item on free list */
ASSERT((*tp)->t_flags & XFS_TRANS_PERM_LOG_RES);
if (flist->xbf_count == 0) {
*committed = 0;
return 0;
}
efi = xfs_trans_get_efi(*tp, flist->xbf_count);
for (free = flist->xbf_first; free; free = free->xbfi_next)
xfs_trans_log_efi_extent(*tp, efi, free->xbfi_startblock,
free->xbfi_blockcount);
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-18 23:51:16 +00:00
error = __xfs_trans_roll(tp, NULL, committed);
if (error) {
/*
* If the transaction was committed, drop the EFD reference
* since we're bailing out of here. The other reference is
* dropped when the EFI hits the AIL.
*
* If the transaction was not committed, the EFI is freed by the
* EFI item unlock handler on abort. Also, we have a new
* transaction so we should return committed=1 even though we're
* returning an error.
*/
if (*committed) {
xfs_efi_release(efi);
xfs_force_shutdown((*tp)->t_mountp,
(error == -EFSCORRUPTED) ?
SHUTDOWN_CORRUPT_INCORE :
SHUTDOWN_META_IO_ERROR);
} else {
*committed = 1;
}
return error;
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-18 23:51:16 +00:00
}
/*
* Get an EFD and free each extent in the list, logging to the EFD in
* the process. The remaining bmap free list is cleaned up by the caller
* on error.
*/
efd = xfs_trans_get_efd(*tp, efi, flist->xbf_count);
for (free = flist->xbf_first; free != NULL; free = next) {
next = free->xbfi_next;
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-18 23:51:16 +00:00
error = xfs_trans_free_extent(*tp, efd, free->xbfi_startblock,
free->xbfi_blockcount);
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-18 23:51:16 +00:00
if (error)
return error;
xfs_bmap_del_free(flist, NULL, free);
}
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-18 23:51:16 +00:00
return 0;
}
int
xfs_bmap_rtalloc(
struct xfs_bmalloca *ap) /* bmap alloc argument struct */
{
xfs_alloctype_t atype = 0; /* type for allocation routines */
int error; /* error return value */
xfs_mount_t *mp; /* mount point structure */
xfs_extlen_t prod = 0; /* product factor for allocators */
xfs_extlen_t ralen = 0; /* realtime allocation length */
xfs_extlen_t align; /* minimum allocation alignment */
xfs_rtblock_t rtb;
mp = ap->ip->i_mount;
align = xfs_get_extsz_hint(ap->ip);
prod = align / mp->m_sb.sb_rextsize;
error = xfs_bmap_extsize_align(mp, &ap->got, &ap->prev,
align, 1, ap->eof, 0,
ap->conv, &ap->offset, &ap->length);
if (error)
return error;
ASSERT(ap->length);
ASSERT(ap->length % mp->m_sb.sb_rextsize == 0);
/*
* If the offset & length are not perfectly aligned
* then kill prod, it will just get us in trouble.
*/
if (do_mod(ap->offset, align) || ap->length % align)
prod = 1;
/*
* Set ralen to be the actual requested length in rtextents.
*/
ralen = ap->length / mp->m_sb.sb_rextsize;
/*
* If the old value was close enough to MAXEXTLEN that
* we rounded up to it, cut it back so it's valid again.
* Note that if it's a really large request (bigger than
* MAXEXTLEN), we don't hear about that number, and can't
* adjust the starting point to match it.
*/
if (ralen * mp->m_sb.sb_rextsize >= MAXEXTLEN)
ralen = MAXEXTLEN / mp->m_sb.sb_rextsize;
/*
* Lock out other modifications to the RT bitmap inode.
*/
xfs_ilock(mp->m_rbmip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(ap->tp, mp->m_rbmip, XFS_ILOCK_EXCL);
/*
* If it's an allocation to an empty file at offset 0,
* pick an extent that will space things out in the rt area.
*/
if (ap->eof && ap->offset == 0) {
xfs_rtblock_t uninitialized_var(rtx); /* realtime extent no */
error = xfs_rtpick_extent(mp, ap->tp, ralen, &rtx);
if (error)
return error;
ap->blkno = rtx * mp->m_sb.sb_rextsize;
} else {
ap->blkno = 0;
}
xfs_bmap_adjacent(ap);
/*
* Realtime allocation, done through xfs_rtallocate_extent.
*/
atype = ap->blkno == 0 ? XFS_ALLOCTYPE_ANY_AG : XFS_ALLOCTYPE_NEAR_BNO;
do_div(ap->blkno, mp->m_sb.sb_rextsize);
rtb = ap->blkno;
ap->length = ralen;
if ((error = xfs_rtallocate_extent(ap->tp, ap->blkno, 1, ap->length,
&ralen, atype, ap->wasdel, prod, &rtb)))
return error;
if (rtb == NULLFSBLOCK && prod > 1 &&
(error = xfs_rtallocate_extent(ap->tp, ap->blkno, 1,
ap->length, &ralen, atype,
ap->wasdel, 1, &rtb)))
return error;
ap->blkno = rtb;
if (ap->blkno != NULLFSBLOCK) {
ap->blkno *= mp->m_sb.sb_rextsize;
ralen *= mp->m_sb.sb_rextsize;
ap->length = ralen;
ap->ip->i_d.di_nblocks += ralen;
xfs_trans_log_inode(ap->tp, ap->ip, XFS_ILOG_CORE);
if (ap->wasdel)
ap->ip->i_delayed_blks -= ralen;
/*
* Adjust the disk quota also. This was reserved
* earlier.
*/
xfs_trans_mod_dquot_byino(ap->tp, ap->ip,
ap->wasdel ? XFS_TRANS_DQ_DELRTBCOUNT :
XFS_TRANS_DQ_RTBCOUNT, (long) ralen);
/* Zero the extent if we were asked to do so */
if (ap->userdata & XFS_ALLOC_USERDATA_ZERO) {
error = xfs_zero_extent(ap->ip, ap->blkno, ap->length);
if (error)
return error;
}
} else {
ap->length = 0;
}
return 0;
}
/*
* Check if the endoff is outside the last extent. If so the caller will grow
* the allocation to a stripe unit boundary. All offsets are considered outside
* the end of file for an empty fork, so 1 is returned in *eof in that case.
*/
int
xfs_bmap_eof(
struct xfs_inode *ip,
xfs_fileoff_t endoff,
int whichfork,
int *eof)
{
struct xfs_bmbt_irec rec;
int error;
error = xfs_bmap_last_extent(NULL, ip, whichfork, &rec, eof);
if (error || *eof)
return error;
*eof = endoff >= rec.br_startoff + rec.br_blockcount;
return 0;
}
/*
* Extent tree block counting routines.
*/
/*
* Count leaf blocks given a range of extent records.
*/
STATIC void
xfs_bmap_count_leaves(
xfs_ifork_t *ifp,
xfs_extnum_t idx,
int numrecs,
int *count)
{
int b;
for (b = 0; b < numrecs; b++) {
xfs_bmbt_rec_host_t *frp = xfs_iext_get_ext(ifp, idx + b);
*count += xfs_bmbt_get_blockcount(frp);
}
}
/*
* Count leaf blocks given a range of extent records originally
* in btree format.
*/
STATIC void
xfs_bmap_disk_count_leaves(
struct xfs_mount *mp,
struct xfs_btree_block *block,
int numrecs,
int *count)
{
int b;
xfs_bmbt_rec_t *frp;
for (b = 1; b <= numrecs; b++) {
frp = XFS_BMBT_REC_ADDR(mp, block, b);
*count += xfs_bmbt_disk_get_blockcount(frp);
}
}
/*
* Recursively walks each level of a btree
* to count total fsblocks in use.
*/
STATIC int /* error */
xfs_bmap_count_tree(
xfs_mount_t *mp, /* file system mount point */
xfs_trans_t *tp, /* transaction pointer */
xfs_ifork_t *ifp, /* inode fork pointer */
xfs_fsblock_t blockno, /* file system block number */
int levelin, /* level in btree */
int *count) /* Count of blocks */
{
int error;
xfs_buf_t *bp, *nbp;
int level = levelin;
__be64 *pp;
xfs_fsblock_t bno = blockno;
xfs_fsblock_t nextbno;
struct xfs_btree_block *block, *nextblock;
int numrecs;
error = xfs_btree_read_bufl(mp, tp, bno, 0, &bp, XFS_BMAP_BTREE_REF,
&xfs_bmbt_buf_ops);
if (error)
return error;
*count += 1;
block = XFS_BUF_TO_BLOCK(bp);
if (--level) {
/* Not at node above leaves, count this level of nodes */
nextbno = be64_to_cpu(block->bb_u.l.bb_rightsib);
while (nextbno != NULLFSBLOCK) {
error = xfs_btree_read_bufl(mp, tp, nextbno, 0, &nbp,
XFS_BMAP_BTREE_REF,
&xfs_bmbt_buf_ops);
if (error)
return error;
*count += 1;
nextblock = XFS_BUF_TO_BLOCK(nbp);
nextbno = be64_to_cpu(nextblock->bb_u.l.bb_rightsib);
xfs_trans_brelse(tp, nbp);
}
/* Dive to the next level */
pp = XFS_BMBT_PTR_ADDR(mp, block, 1, mp->m_bmap_dmxr[1]);
bno = be64_to_cpu(*pp);
if (unlikely((error =
xfs_bmap_count_tree(mp, tp, ifp, bno, level, count)) < 0)) {
xfs_trans_brelse(tp, bp);
XFS_ERROR_REPORT("xfs_bmap_count_tree(1)",
XFS_ERRLEVEL_LOW, mp);
return -EFSCORRUPTED;
}
xfs_trans_brelse(tp, bp);
} else {
/* count all level 1 nodes and their leaves */
for (;;) {
nextbno = be64_to_cpu(block->bb_u.l.bb_rightsib);
numrecs = be16_to_cpu(block->bb_numrecs);
xfs_bmap_disk_count_leaves(mp, block, numrecs, count);
xfs_trans_brelse(tp, bp);
if (nextbno == NULLFSBLOCK)
break;
bno = nextbno;
error = xfs_btree_read_bufl(mp, tp, bno, 0, &bp,
XFS_BMAP_BTREE_REF,
&xfs_bmbt_buf_ops);
if (error)
return error;
*count += 1;
block = XFS_BUF_TO_BLOCK(bp);
}
}
return 0;
}
/*
* Count fsblocks of the given fork.
*/
int /* error */
xfs_bmap_count_blocks(
xfs_trans_t *tp, /* transaction pointer */
xfs_inode_t *ip, /* incore inode */
int whichfork, /* data or attr fork */
int *count) /* out: count of blocks */
{
struct xfs_btree_block *block; /* current btree block */
xfs_fsblock_t bno; /* block # of "block" */
xfs_ifork_t *ifp; /* fork structure */
int level; /* btree level, for checking */
xfs_mount_t *mp; /* file system mount structure */
__be64 *pp; /* pointer to block address */
bno = NULLFSBLOCK;
mp = ip->i_mount;
ifp = XFS_IFORK_PTR(ip, whichfork);
if ( XFS_IFORK_FORMAT(ip, whichfork) == XFS_DINODE_FMT_EXTENTS ) {
xfs_bmap_count_leaves(ifp, 0,
ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t),
count);
return 0;
}
/*
* Root level must use BMAP_BROOT_PTR_ADDR macro to get ptr out.
*/
block = ifp->if_broot;
level = be16_to_cpu(block->bb_level);
ASSERT(level > 0);
pp = XFS_BMAP_BROOT_PTR_ADDR(mp, block, 1, ifp->if_broot_bytes);
bno = be64_to_cpu(*pp);
ASSERT(bno != NULLFSBLOCK);
ASSERT(XFS_FSB_TO_AGNO(mp, bno) < mp->m_sb.sb_agcount);
ASSERT(XFS_FSB_TO_AGBNO(mp, bno) < mp->m_sb.sb_agblocks);
if (unlikely(xfs_bmap_count_tree(mp, tp, ifp, bno, level, count) < 0)) {
XFS_ERROR_REPORT("xfs_bmap_count_blocks(2)", XFS_ERRLEVEL_LOW,
mp);
return -EFSCORRUPTED;
}
return 0;
}
/*
* returns 1 for success, 0 if we failed to map the extent.
*/
STATIC int
xfs_getbmapx_fix_eof_hole(
xfs_inode_t *ip, /* xfs incore inode pointer */
struct getbmapx *out, /* output structure */
int prealloced, /* this is a file with
* preallocated data space */
__int64_t end, /* last block requested */
xfs_fsblock_t startblock)
{
__int64_t fixlen;
xfs_mount_t *mp; /* file system mount point */
xfs_ifork_t *ifp; /* inode fork pointer */
xfs_extnum_t lastx; /* last extent pointer */
xfs_fileoff_t fileblock;
if (startblock == HOLESTARTBLOCK) {
mp = ip->i_mount;
out->bmv_block = -1;
fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, XFS_ISIZE(ip)));
fixlen -= out->bmv_offset;
if (prealloced && out->bmv_offset + out->bmv_length == end) {
/* Came to hole at EOF. Trim it. */
if (fixlen <= 0)
return 0;
out->bmv_length = fixlen;
}
} else {
if (startblock == DELAYSTARTBLOCK)
out->bmv_block = -2;
else
out->bmv_block = xfs_fsb_to_db(ip, startblock);
fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset);
ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK);
if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) &&
(lastx == (ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))-1))
out->bmv_oflags |= BMV_OF_LAST;
}
return 1;
}
/*
* Get inode's extents as described in bmv, and format for output.
* Calls formatter to fill the user's buffer until all extents
* are mapped, until the passed-in bmv->bmv_count slots have
* been filled, or until the formatter short-circuits the loop,
* if it is tracking filled-in extents on its own.
*/
int /* error code */
xfs_getbmap(
xfs_inode_t *ip,
struct getbmapx *bmv, /* user bmap structure */
xfs_bmap_format_t formatter, /* format to user */
void *arg) /* formatter arg */
{
__int64_t bmvend; /* last block requested */
int error = 0; /* return value */
__int64_t fixlen; /* length for -1 case */
int i; /* extent number */
int lock; /* lock state */
xfs_bmbt_irec_t *map; /* buffer for user's data */
xfs_mount_t *mp; /* file system mount point */
int nex; /* # of user extents can do */
int nexleft; /* # of user extents left */
int subnex; /* # of bmapi's can do */
int nmap; /* number of map entries */
struct getbmapx *out; /* output structure */
int whichfork; /* data or attr fork */
int prealloced; /* this is a file with
* preallocated data space */
int iflags; /* interface flags */
int bmapi_flags; /* flags for xfs_bmapi */
int cur_ext = 0;
mp = ip->i_mount;
iflags = bmv->bmv_iflags;
whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK;
if (whichfork == XFS_ATTR_FORK) {
if (XFS_IFORK_Q(ip)) {
if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS &&
ip->i_d.di_aformat != XFS_DINODE_FMT_BTREE &&
ip->i_d.di_aformat != XFS_DINODE_FMT_LOCAL)
return -EINVAL;
} else if (unlikely(
ip->i_d.di_aformat != 0 &&
ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS)) {
XFS_ERROR_REPORT("xfs_getbmap", XFS_ERRLEVEL_LOW,
ip->i_mount);
return -EFSCORRUPTED;
}
prealloced = 0;
fixlen = 1LL << 32;
} else {
if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
return -EINVAL;
if (xfs_get_extsz_hint(ip) ||
ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){
prealloced = 1;
fixlen = mp->m_super->s_maxbytes;
} else {
prealloced = 0;
fixlen = XFS_ISIZE(ip);
}
}
if (bmv->bmv_length == -1) {
fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen));
bmv->bmv_length =
max_t(__int64_t, fixlen - bmv->bmv_offset, 0);
} else if (bmv->bmv_length == 0) {
bmv->bmv_entries = 0;
return 0;
} else if (bmv->bmv_length < 0) {
return -EINVAL;
}
nex = bmv->bmv_count - 1;
if (nex <= 0)
return -EINVAL;
bmvend = bmv->bmv_offset + bmv->bmv_length;
if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx))
return -ENOMEM;
out = kmem_zalloc_large(bmv->bmv_count * sizeof(struct getbmapx), 0);
if (!out)
return -ENOMEM;
xfs_ilock(ip, XFS_IOLOCK_SHARED);
if (whichfork == XFS_DATA_FORK) {
if (!(iflags & BMV_IF_DELALLOC) &&
(ip->i_delayed_blks || XFS_ISIZE(ip) > ip->i_d.di_size)) {
error = filemap_write_and_wait(VFS_I(ip)->i_mapping);
if (error)
goto out_unlock_iolock;
/*
* Even after flushing the inode, there can still be
* delalloc blocks on the inode beyond EOF due to
* speculative preallocation. These are not removed
* until the release function is called or the inode
* is inactivated. Hence we cannot assert here that
* ip->i_delayed_blks == 0.
*/
}
lock = xfs_ilock_data_map_shared(ip);
} else {
lock = xfs_ilock_attr_map_shared(ip);
}
/*
* Don't let nex be bigger than the number of extents
* we can have assuming alternating holes and real extents.
*/
if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
bmapi_flags = xfs_bmapi_aflag(whichfork);
if (!(iflags & BMV_IF_PREALLOC))
bmapi_flags |= XFS_BMAPI_IGSTATE;
/*
* Allocate enough space to handle "subnex" maps at a time.
*/
error = -ENOMEM;
subnex = 16;
map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL | KM_NOFS);
if (!map)
goto out_unlock_ilock;
bmv->bmv_entries = 0;
if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 &&
(whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) {
error = 0;
goto out_free_map;
}
nexleft = nex;
do {
nmap = (nexleft > subnex) ? subnex : nexleft;
error = xfs_bmapi_read(ip, XFS_BB_TO_FSBT(mp, bmv->bmv_offset),
XFS_BB_TO_FSB(mp, bmv->bmv_length),
map, &nmap, bmapi_flags);
if (error)
goto out_free_map;
ASSERT(nmap <= subnex);
for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) {
out[cur_ext].bmv_oflags = 0;
if (map[i].br_state == XFS_EXT_UNWRITTEN)
out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC;
else if (map[i].br_startblock == DELAYSTARTBLOCK)
out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC;
out[cur_ext].bmv_offset =
XFS_FSB_TO_BB(mp, map[i].br_startoff);
out[cur_ext].bmv_length =
XFS_FSB_TO_BB(mp, map[i].br_blockcount);
out[cur_ext].bmv_unused1 = 0;
out[cur_ext].bmv_unused2 = 0;
/*
* delayed allocation extents that start beyond EOF can
* occur due to speculative EOF allocation when the
* delalloc extent is larger than the largest freespace
* extent at conversion time. These extents cannot be
* converted by data writeback, so can exist here even
* if we are not supposed to be finding delalloc
* extents.
*/
if (map[i].br_startblock == DELAYSTARTBLOCK &&
map[i].br_startoff <= XFS_B_TO_FSB(mp, XFS_ISIZE(ip)))
ASSERT((iflags & BMV_IF_DELALLOC) != 0);
if (map[i].br_startblock == HOLESTARTBLOCK &&
whichfork == XFS_ATTR_FORK) {
/* came to the end of attribute fork */
out[cur_ext].bmv_oflags |= BMV_OF_LAST;
goto out_free_map;
}
if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext],
prealloced, bmvend,
map[i].br_startblock))
goto out_free_map;
bmv->bmv_offset =
out[cur_ext].bmv_offset +
out[cur_ext].bmv_length;
bmv->bmv_length =
max_t(__int64_t, 0, bmvend - bmv->bmv_offset);
/*
* In case we don't want to return the hole,
* don't increase cur_ext so that we can reuse
* it in the next loop.
*/
if ((iflags & BMV_IF_NO_HOLES) &&
map[i].br_startblock == HOLESTARTBLOCK) {
memset(&out[cur_ext], 0, sizeof(out[cur_ext]));
continue;
}
nexleft--;
bmv->bmv_entries++;
cur_ext++;
}
} while (nmap && nexleft && bmv->bmv_length);
out_free_map:
kmem_free(map);
out_unlock_ilock:
xfs_iunlock(ip, lock);
out_unlock_iolock:
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
for (i = 0; i < cur_ext; i++) {
int full = 0; /* user array is full */
/* format results & advance arg */
error = formatter(&arg, &out[i], &full);
if (error || full)
break;
}
kmem_free(out);
return error;
}
/*
* dead simple method of punching delalyed allocation blocks from a range in
* the inode. Walks a block at a time so will be slow, but is only executed in
* rare error cases so the overhead is not critical. This will always punch out
* both the start and end blocks, even if the ranges only partially overlap
* them, so it is up to the caller to ensure that partial blocks are not
* passed in.
*/
int
xfs_bmap_punch_delalloc_range(
struct xfs_inode *ip,
xfs_fileoff_t start_fsb,
xfs_fileoff_t length)
{
xfs_fileoff_t remaining = length;
int error = 0;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
do {
int done;
xfs_bmbt_irec_t imap;
int nimaps = 1;
xfs_fsblock_t firstblock;
xfs_bmap_free_t flist;
/*
* Map the range first and check that it is a delalloc extent
* before trying to unmap the range. Otherwise we will be
* trying to remove a real extent (which requires a
* transaction) or a hole, which is probably a bad idea...
*/
error = xfs_bmapi_read(ip, start_fsb, 1, &imap, &nimaps,
XFS_BMAPI_ENTIRE);
if (error) {
/* something screwed, just bail */
if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
xfs_alert(ip->i_mount,
"Failed delalloc mapping lookup ino %lld fsb %lld.",
ip->i_ino, start_fsb);
}
break;
}
if (!nimaps) {
/* nothing there */
goto next_block;
}
if (imap.br_startblock != DELAYSTARTBLOCK) {
/* been converted, ignore */
goto next_block;
}
WARN_ON(imap.br_blockcount == 0);
/*
* Note: while we initialise the firstblock/flist pair, they
* should never be used because blocks should never be
* allocated or freed for a delalloc extent and hence we need
* don't cancel or finish them after the xfs_bunmapi() call.
*/
xfs_bmap_init(&flist, &firstblock);
error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock,
&flist, &done);
if (error)
break;
ASSERT(!flist.xbf_count && !flist.xbf_first);
next_block:
start_fsb++;
remaining--;
} while(remaining > 0);
return error;
}
/*
* Test whether it is appropriate to check an inode for and free post EOF
* blocks. The 'force' parameter determines whether we should also consider
* regular files that are marked preallocated or append-only.
*/
bool
xfs_can_free_eofblocks(struct xfs_inode *ip, bool force)
{
/* prealloc/delalloc exists only on regular files */
if (!S_ISREG(ip->i_d.di_mode))
return false;
/*
* Zero sized files with no cached pages and delalloc blocks will not
* have speculative prealloc/delalloc blocks to remove.
*/
if (VFS_I(ip)->i_size == 0 &&
VFS_I(ip)->i_mapping->nrpages == 0 &&
ip->i_delayed_blks == 0)
return false;
/* If we haven't read in the extent list, then don't do it now. */
if (!(ip->i_df.if_flags & XFS_IFEXTENTS))
return false;
/*
* Do not free real preallocated or append-only files unless the file
* has delalloc blocks and we are forced to remove them.
*/
if (ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC | XFS_DIFLAG_APPEND))
if (!force || ip->i_delayed_blks == 0)
return false;
return true;
}
/*
* This is called by xfs_inactive to free any blocks beyond eof
* when the link count isn't zero and by xfs_dm_punch_hole() when
* punching a hole to EOF.
*/
int
xfs_free_eofblocks(
xfs_mount_t *mp,
xfs_inode_t *ip,
bool need_iolock)
{
xfs_trans_t *tp;
int error;
xfs_fileoff_t end_fsb;
xfs_fileoff_t last_fsb;
xfs_filblks_t map_len;
int nimaps;
xfs_bmbt_irec_t imap;
/*
* Figure out if there are any blocks beyond the end
* of the file. If not, then there is nothing to do.
*/
end_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)XFS_ISIZE(ip));
last_fsb = XFS_B_TO_FSB(mp, mp->m_super->s_maxbytes);
if (last_fsb <= end_fsb)
return 0;
map_len = last_fsb - end_fsb;
nimaps = 1;
xfs_ilock(ip, XFS_ILOCK_SHARED);
error = xfs_bmapi_read(ip, end_fsb, map_len, &imap, &nimaps, 0);
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (!error && (nimaps != 0) &&
(imap.br_startblock != HOLESTARTBLOCK ||
ip->i_delayed_blks)) {
/*
* Attach the dquots to the inode up front.
*/
error = xfs_qm_dqattach(ip, 0);
if (error)
return error;
/*
* There are blocks after the end of file.
* Free them up now by truncating the file to
* its current size.
*/
tp = xfs_trans_alloc(mp, XFS_TRANS_INACTIVE);
if (need_iolock) {
if (!xfs_ilock_nowait(ip, XFS_IOLOCK_EXCL)) {
xfs_trans_cancel(tp);
return -EAGAIN;
}
}
error = xfs_trans_reserve(tp, &M_RES(mp)->tr_itruncate, 0, 0);
if (error) {
ASSERT(XFS_FORCED_SHUTDOWN(mp));
xfs_trans_cancel(tp);
if (need_iolock)
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_trans_ijoin(tp, ip, 0);
/*
* Do not update the on-disk file size. If we update the
* on-disk file size and then the system crashes before the
* contents of the file are flushed to disk then the files
* may be full of holes (ie NULL files bug).
*/
error = xfs_itruncate_extents(&tp, ip, XFS_DATA_FORK,
XFS_ISIZE(ip));
if (error) {
/*
* If we get an error at this point we simply don't
* bother truncating the file.
*/
xfs_trans_cancel(tp);
} else {
error = xfs_trans_commit(tp);
if (!error)
xfs_inode_clear_eofblocks_tag(ip);
}
xfs_iunlock(ip, XFS_ILOCK_EXCL);
if (need_iolock)
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
}
return error;
}
int
xfs_alloc_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len,
int alloc_type)
{
xfs_mount_t *mp = ip->i_mount;
xfs_off_t count;
xfs_filblks_t allocated_fsb;
xfs_filblks_t allocatesize_fsb;
xfs_extlen_t extsz, temp;
xfs_fileoff_t startoffset_fsb;
xfs_fsblock_t firstfsb;
int nimaps;
int quota_flag;
int rt;
xfs_trans_t *tp;
xfs_bmbt_irec_t imaps[1], *imapp;
xfs_bmap_free_t free_list;
uint qblocks, resblks, resrtextents;
int committed;
int error;
trace_xfs_alloc_file_space(ip);
if (XFS_FORCED_SHUTDOWN(mp))
return -EIO;
error = xfs_qm_dqattach(ip, 0);
if (error)
return error;
if (len <= 0)
return -EINVAL;
rt = XFS_IS_REALTIME_INODE(ip);
extsz = xfs_get_extsz_hint(ip);
count = len;
imapp = &imaps[0];
nimaps = 1;
startoffset_fsb = XFS_B_TO_FSBT(mp, offset);
allocatesize_fsb = XFS_B_TO_FSB(mp, count);
/*
* Allocate file space until done or until there is an error
*/
while (allocatesize_fsb && !error) {
xfs_fileoff_t s, e;
/*
* Determine space reservations for data/realtime.
*/
if (unlikely(extsz)) {
s = startoffset_fsb;
do_div(s, extsz);
s *= extsz;
e = startoffset_fsb + allocatesize_fsb;
if ((temp = do_mod(startoffset_fsb, extsz)))
e += temp;
if ((temp = do_mod(e, extsz)))
e += extsz - temp;
} else {
s = 0;
e = allocatesize_fsb;
}
/*
* The transaction reservation is limited to a 32-bit block
* count, hence we need to limit the number of blocks we are
* trying to reserve to avoid an overflow. We can't allocate
* more than @nimaps extents, and an extent is limited on disk
* to MAXEXTLEN (21 bits), so use that to enforce the limit.
*/
resblks = min_t(xfs_fileoff_t, (e - s), (MAXEXTLEN * nimaps));
if (unlikely(rt)) {
resrtextents = qblocks = resblks;
resrtextents /= mp->m_sb.sb_rextsize;
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
quota_flag = XFS_QMOPT_RES_RTBLKS;
} else {
resrtextents = 0;
resblks = qblocks = XFS_DIOSTRAT_SPACE_RES(mp, resblks);
quota_flag = XFS_QMOPT_RES_REGBLKS;
}
/*
* Allocate and setup the transaction.
*/
tp = xfs_trans_alloc(mp, XFS_TRANS_DIOSTRAT);
error = xfs_trans_reserve(tp, &M_RES(mp)->tr_write,
resblks, resrtextents);
/*
* Check for running out of space
*/
if (error) {
/*
* Free the transaction structure.
*/
ASSERT(error == -ENOSPC || XFS_FORCED_SHUTDOWN(mp));
xfs_trans_cancel(tp);
break;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks,
0, quota_flag);
if (error)
goto error1;
xfs_trans_ijoin(tp, ip, 0);
xfs_bmap_init(&free_list, &firstfsb);
error = xfs_bmapi_write(tp, ip, startoffset_fsb,
allocatesize_fsb, alloc_type, &firstfsb,
xfs: pass total block res. as total xfs_bmapi_write() parameter The total field from struct xfs_alloc_arg is a bit of an unknown commodity. It is documented as the total block requirement for the transaction and is used in this manner from most call sites by virtue of passing the total block reservation of the transaction associated with an allocation. Several xfs_bmapi_write() callers pass hardcoded values of 0 or 1 for the total block requirement, which is a historical oddity without any clear reasoning. The xfs_iomap_write_direct() caller, for example, passes 0 for the total block requirement. This has been determined to cause problems in the form of ABBA deadlocks of AGF buffers due to incorrect AG selection in the block allocator. Specifically, the xfs_alloc_space_available() function incorrectly selects an AG that doesn't actually have sufficient space for the allocation. This occurs because the args.total field is 0 and thus the remaining free space check on the AG doesn't actually consider the size of the allocation request. This locks the AGF buffer, the allocation attempt proceeds and ultimately fails (in xfs_alloc_fix_minleft()), and xfs_alloc_vexent() moves on to the next AG. In turn, this can lead to incorrect AG locking order (if the allocator wraps around, attempting to lock AG 0 after acquiring AG N) and thus deadlock if racing with another operation. This problem has been reproduced via generic/299 on smallish (1GB) ramdisk test devices. To avoid this problem, replace the undocumented hardcoded total parameters from the iomap and utility callers to pass the block reservation used for the associated transaction. This is consistent with other xfs_bmapi_write() callers throughout XFS. The assumption is that the total field allows the selection of an AG that can handle the entire operation rather than simply the allocation/range being requested (e.g., resulting btree splits, etc.). This addresses the aforementioned generic/299 hang by ensuring AG selection only occurs when the allocation can be satisfied by the AG. Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 05:04:13 +00:00
resblks, imapp, &nimaps, &free_list);
if (error) {
goto error0;
}
/*
* Complete the transaction
*/
error = xfs_bmap_finish(&tp, &free_list, &committed);
if (error) {
goto error0;
}
error = xfs_trans_commit(tp);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
if (error) {
break;
}
allocated_fsb = imapp->br_blockcount;
if (nimaps == 0) {
error = -ENOSPC;
break;
}
startoffset_fsb += allocated_fsb;
allocatesize_fsb -= allocated_fsb;
}
return error;
error0: /* Cancel bmap, unlock inode, unreserve quota blocks, cancel trans */
xfs_bmap_cancel(&free_list);
xfs_trans_unreserve_quota_nblks(tp, ip, (long)qblocks, 0, quota_flag);
error1: /* Just cancel transaction */
xfs_trans_cancel(tp);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
return error;
}
/*
* Zero file bytes between startoff and endoff inclusive.
* The iolock is held exclusive and no blocks are buffered.
*
* This function is used by xfs_free_file_space() to zero
* partial blocks when the range to free is not block aligned.
* When unreserving space with boundaries that are not block
* aligned we round up the start and round down the end
* boundaries and then use this function to zero the parts of
* the blocks that got dropped during the rounding.
*/
STATIC int
xfs_zero_remaining_bytes(
xfs_inode_t *ip,
xfs_off_t startoff,
xfs_off_t endoff)
{
xfs_bmbt_irec_t imap;
xfs_fileoff_t offset_fsb;
xfs_off_t lastoffset;
xfs_off_t offset;
xfs_buf_t *bp;
xfs_mount_t *mp = ip->i_mount;
int nimap;
int error = 0;
/*
* Avoid doing I/O beyond eof - it's not necessary
* since nothing can read beyond eof. The space will
* be zeroed when the file is extended anyway.
*/
if (startoff >= XFS_ISIZE(ip))
return 0;
if (endoff > XFS_ISIZE(ip))
endoff = XFS_ISIZE(ip);
for (offset = startoff; offset <= endoff; offset = lastoffset + 1) {
uint lock_mode;
offset_fsb = XFS_B_TO_FSBT(mp, offset);
nimap = 1;
lock_mode = xfs_ilock_data_map_shared(ip);
error = xfs_bmapi_read(ip, offset_fsb, 1, &imap, &nimap, 0);
xfs_iunlock(ip, lock_mode);
if (error || nimap < 1)
break;
ASSERT(imap.br_blockcount >= 1);
ASSERT(imap.br_startoff == offset_fsb);
ASSERT(imap.br_startblock != DELAYSTARTBLOCK);
if (imap.br_startblock == HOLESTARTBLOCK ||
imap.br_state == XFS_EXT_UNWRITTEN) {
/* skip the entire extent */
lastoffset = XFS_FSB_TO_B(mp, imap.br_startoff +
imap.br_blockcount) - 1;
continue;
}
lastoffset = XFS_FSB_TO_B(mp, imap.br_startoff + 1) - 1;
if (lastoffset > endoff)
lastoffset = endoff;
/* DAX can just zero the backing device directly */
if (IS_DAX(VFS_I(ip))) {
error = dax_zero_page_range(VFS_I(ip), offset,
lastoffset - offset + 1,
xfs_get_blocks_direct);
if (error)
return error;
continue;
}
error = xfs_buf_read_uncached(XFS_IS_REALTIME_INODE(ip) ?
mp->m_rtdev_targp : mp->m_ddev_targp,
xfs_fsb_to_db(ip, imap.br_startblock),
BTOBB(mp->m_sb.sb_blocksize),
0, &bp, NULL);
if (error)
return error;
memset(bp->b_addr +
(offset - XFS_FSB_TO_B(mp, imap.br_startoff)),
0, lastoffset - offset + 1);
error = xfs_bwrite(bp);
xfs_buf_relse(bp);
if (error)
return error;
}
return error;
}
int
xfs_free_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len)
{
int committed;
int done;
xfs_fileoff_t endoffset_fsb;
int error;
xfs_fsblock_t firstfsb;
xfs_bmap_free_t free_list;
xfs_bmbt_irec_t imap;
xfs_off_t ioffset;
xfs_off_t iendoffset;
xfs_extlen_t mod=0;
xfs_mount_t *mp;
int nimap;
uint resblks;
xfs_off_t rounding;
int rt;
xfs_fileoff_t startoffset_fsb;
xfs_trans_t *tp;
mp = ip->i_mount;
trace_xfs_free_file_space(ip);
error = xfs_qm_dqattach(ip, 0);
if (error)
return error;
error = 0;
if (len <= 0) /* if nothing being freed */
return error;
rt = XFS_IS_REALTIME_INODE(ip);
startoffset_fsb = XFS_B_TO_FSB(mp, offset);
endoffset_fsb = XFS_B_TO_FSBT(mp, offset + len);
/* wait for the completion of any pending DIOs */
inode_dio_wait(VFS_I(ip));
rounding = max_t(xfs_off_t, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
ioffset = round_down(offset, rounding);
iendoffset = round_up(offset + len, rounding) - 1;
error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, ioffset,
iendoffset);
if (error)
goto out;
truncate_pagecache_range(VFS_I(ip), ioffset, iendoffset);
/*
* Need to zero the stuff we're not freeing, on disk.
* If it's a realtime file & can't use unwritten extents then we
* actually need to zero the extent edges. Otherwise xfs_bunmapi
* will take care of it for us.
*/
if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
nimap = 1;
error = xfs_bmapi_read(ip, startoffset_fsb, 1,
&imap, &nimap, 0);
if (error)
goto out;
ASSERT(nimap == 0 || nimap == 1);
if (nimap && imap.br_startblock != HOLESTARTBLOCK) {
xfs_daddr_t block;
ASSERT(imap.br_startblock != DELAYSTARTBLOCK);
block = imap.br_startblock;
mod = do_div(block, mp->m_sb.sb_rextsize);
if (mod)
startoffset_fsb += mp->m_sb.sb_rextsize - mod;
}
nimap = 1;
error = xfs_bmapi_read(ip, endoffset_fsb - 1, 1,
&imap, &nimap, 0);
if (error)
goto out;
ASSERT(nimap == 0 || nimap == 1);
if (nimap && imap.br_startblock != HOLESTARTBLOCK) {
ASSERT(imap.br_startblock != DELAYSTARTBLOCK);
mod++;
if (mod && (mod != mp->m_sb.sb_rextsize))
endoffset_fsb -= mod;
}
}
if ((done = (endoffset_fsb <= startoffset_fsb)))
/*
* One contiguous piece to clear
*/
error = xfs_zero_remaining_bytes(ip, offset, offset + len - 1);
else {
/*
* Some full blocks, possibly two pieces to clear
*/
if (offset < XFS_FSB_TO_B(mp, startoffset_fsb))
error = xfs_zero_remaining_bytes(ip, offset,
XFS_FSB_TO_B(mp, startoffset_fsb) - 1);
if (!error &&
XFS_FSB_TO_B(mp, endoffset_fsb) < offset + len)
error = xfs_zero_remaining_bytes(ip,
XFS_FSB_TO_B(mp, endoffset_fsb),
offset + len - 1);
}
/*
* free file space until done or until there is an error
*/
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
while (!error && !done) {
/*
* allocate and setup the transaction. Allow this
* transaction to dip into the reserve blocks to ensure
* the freeing of the space succeeds at ENOSPC.
*/
tp = xfs_trans_alloc(mp, XFS_TRANS_DIOSTRAT);
error = xfs_trans_reserve(tp, &M_RES(mp)->tr_write, resblks, 0);
/*
* check for running out of space
*/
if (error) {
/*
* Free the transaction structure.
*/
ASSERT(error == -ENOSPC || XFS_FORCED_SHUTDOWN(mp));
xfs_trans_cancel(tp);
break;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_trans_reserve_quota(tp, mp,
ip->i_udquot, ip->i_gdquot, ip->i_pdquot,
resblks, 0, XFS_QMOPT_RES_REGBLKS);
if (error)
goto error1;
xfs_trans_ijoin(tp, ip, 0);
/*
* issue the bunmapi() call to free the blocks
*/
xfs_bmap_init(&free_list, &firstfsb);
error = xfs_bunmapi(tp, ip, startoffset_fsb,
endoffset_fsb - startoffset_fsb,
0, 2, &firstfsb, &free_list, &done);
if (error) {
goto error0;
}
/*
* complete the transaction
*/
error = xfs_bmap_finish(&tp, &free_list, &committed);
if (error) {
goto error0;
}
error = xfs_trans_commit(tp);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
}
out:
return error;
error0:
xfs_bmap_cancel(&free_list);
error1:
xfs_trans_cancel(tp);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
goto out;
}
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-29 23:35:11 +00:00
/*
* Preallocate and zero a range of a file. This mechanism has the allocation
* semantics of fallocate and in addition converts data in the range to zeroes.
*/
int
xfs_zero_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-29 23:35:11 +00:00
uint blksize;
int error;
trace_xfs_zero_file_space(ip);
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-29 23:35:11 +00:00
blksize = 1 << mp->m_sb.sb_blocklog;
/*
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-29 23:35:11 +00:00
* Punch a hole and prealloc the range. We use hole punch rather than
* unwritten extent conversion for two reasons:
*
* 1.) Hole punch handles partial block zeroing for us.
*
* 2.) If prealloc returns ENOSPC, the file range is still zero-valued
* by virtue of the hole punch.
*/
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-29 23:35:11 +00:00
error = xfs_free_file_space(ip, offset, len);
if (error)
goto out;
xfs: rework zero range to prevent invalid i_size updates The zero range operation is analogous to fallocate with the exception of converting the range to zeroes. E.g., it attempts to allocate zeroed blocks over the range specified by the caller. The XFS implementation kills all delalloc blocks currently over the aligned range, converts the range to allocated zero blocks (unwritten extents) and handles the partial pages at the ends of the range by sending writes through the pagecache. The current implementation suffers from several problems associated with inode size. If the aligned range covers an extending I/O, said I/O is discarded and an inode size update from a previous write never makes it to disk. Further, if an unaligned zero range extends beyond eof, the page write induced for the partial end page can itself increase the inode size, even if the zero range request is not supposed to update i_size (via KEEP_SIZE, similar to an fallocate beyond EOF). The latter behavior not only incorrectly increases the inode size, but can lead to stray delalloc blocks on the inode. Typically, post-eof preallocation blocks are either truncated on release or inode eviction or explicitly written to by xfs_zero_eof() on natural file size extension. If the inode size increases due to zero range, however, associated blocks leak into the address space having never been converted or mapped to pagecache pages. A direct I/O to such an uncovered range cannot convert the extent via writeback and will BUG(). For example: $ xfs_io -fc "pwrite 0 128k" -c "fzero -k 1m 54321" <file> ... $ xfs_io -d -c "pread 128k 128k" <file> <BUG> If the entire delalloc extent happens to not have page coverage whatsoever (e.g., delalloc conversion couldn't find a large enough free space extent), even a full file writeback won't convert what's left of the extent and we'll assert on inode eviction. Rework xfs_zero_file_space() to avoid buffered I/O for partial pages. Use the existing hole punch and prealloc mechanisms as primitives for zero range. This implementation is not efficient nor ideal as we writeback dirty data over the range and remove existing extents rather than convert to unwrittern. The former writeback, however, is currently the only mechanism available to ensure consistency between pagecache and extent state. Even a pagecache truncate/delalloc punch prior to hole punch has lead to inconsistencies due to racing with writeback. This provides a consistent, correct implementation of zero range that survives fsstress/fsx testing without assert failures. The implementation can be optimized from this point forward once the fundamental issue of pagecache and delalloc extent state consistency is addressed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-10-29 23:35:11 +00:00
error = xfs_alloc_file_space(ip, round_down(offset, blksize),
round_up(offset + len, blksize) -
round_down(offset, blksize),
XFS_BMAPI_PREALLOC);
out:
return error;
}
/*
* @next_fsb will keep track of the extent currently undergoing shift.
* @stop_fsb will keep track of the extent at which we have to stop.
* If we are shifting left, we will start with block (offset + len) and
* shift each extent till last extent.
* If we are shifting right, we will start with last extent inside file space
* and continue until we reach the block corresponding to offset.
*/
static int
xfs_shift_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len,
enum shift_direction direction)
{
int done = 0;
struct xfs_mount *mp = ip->i_mount;
struct xfs_trans *tp;
int error;
struct xfs_bmap_free free_list;
xfs_fsblock_t first_block;
int committed;
xfs_fileoff_t stop_fsb;
xfs_fileoff_t next_fsb;
xfs_fileoff_t shift_fsb;
ASSERT(direction == SHIFT_LEFT || direction == SHIFT_RIGHT);
if (direction == SHIFT_LEFT) {
next_fsb = XFS_B_TO_FSB(mp, offset + len);
stop_fsb = XFS_B_TO_FSB(mp, VFS_I(ip)->i_size);
} else {
/*
* If right shift, delegate the work of initialization of
* next_fsb to xfs_bmap_shift_extent as it has ilock held.
*/
next_fsb = NULLFSBLOCK;
stop_fsb = XFS_B_TO_FSB(mp, offset);
}
shift_fsb = XFS_B_TO_FSB(mp, len);
xfs: writeback and inval. file range to be shifted by collapse The collapse range operation currently writes the entire file before starting the collapse to avoid changes in the in-core extent list due to writeback causing the extent count to change. Now that collapse range is fsb based rather than extent index based it can sustain changes in the extent list during the shift sequence without disruption. Modify xfs_collapse_file_space() to writeback and invalidate pages associated with the range of the file to be shifted. xfs_free_file_space() currently has similar behavior, but the space free need only affect the region of the file that is freed and this could change in the future. Also update the comments to reflect the current implementation. We retain the eofblocks trim permanently as a best option for dealing with delalloc extents. We don't shift delalloc extents because this scenario only occurs with post-eof preallocation (since data must be flushed such that the cache can be invalidated and data can be shifted). That means said space must also be initialized before being shifted into the accessible region of the file only to be immediately truncated off as the last part of the collapse. In other words, the eofblocks trim will happen anyways, we just run it first to ensure the file remains in a consistent state throughout the collapse. Finally, detect and fail explicitly in the event of a delalloc extent during the extent shift. The implementation does not support delalloc extents and the caller is expected to prevent this scenario in advance as is done by collapse. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-23 05:39:05 +00:00
/*
* Trim eofblocks to avoid shifting uninitialized post-eof preallocation
* into the accessible region of the file.
*/
if (xfs_can_free_eofblocks(ip, true)) {
error = xfs_free_eofblocks(mp, ip, false);
if (error)
return error;
}
xfs: xfs_file_collapse_range is delalloc challenged If we have delalloc extents on a file before we run a collapse range opertaion, we sync the range that we are going to collapse to convert delalloc extents in that region to real extents to simplify the shift operation. However, the shift operation then assumes that the extent list is not going to change as it iterates over the extent list moving things about. Unfortunately, this isn't true because we can't hold the ILOCK over all the operations. We can prevent new IO from modifying the extent list by holding the IOLOCK, but that doesn't prevent writeback from running.... And when writeback runs, it can convert delalloc extents is the range of the file prior to the region being collapsed, and this changes the indexes of all the extents in the file. That causes the collapse range operation to Go Bad. The right fix is to rewrite the extent shift operation not to be dependent on the extent list not changing across the entire operation, but this is a fairly significant piece of work to do. Hence, as a short-term workaround for the problem, sync the entire file before starting a collapse operation to remove all delalloc ranges from the file and so avoid the problem of concurrent writeback changing the extent list. Diagnosed-and-Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-02 02:12:53 +00:00
xfs: writeback and inval. file range to be shifted by collapse The collapse range operation currently writes the entire file before starting the collapse to avoid changes in the in-core extent list due to writeback causing the extent count to change. Now that collapse range is fsb based rather than extent index based it can sustain changes in the extent list during the shift sequence without disruption. Modify xfs_collapse_file_space() to writeback and invalidate pages associated with the range of the file to be shifted. xfs_free_file_space() currently has similar behavior, but the space free need only affect the region of the file that is freed and this could change in the future. Also update the comments to reflect the current implementation. We retain the eofblocks trim permanently as a best option for dealing with delalloc extents. We don't shift delalloc extents because this scenario only occurs with post-eof preallocation (since data must be flushed such that the cache can be invalidated and data can be shifted). That means said space must also be initialized before being shifted into the accessible region of the file only to be immediately truncated off as the last part of the collapse. In other words, the eofblocks trim will happen anyways, we just run it first to ensure the file remains in a consistent state throughout the collapse. Finally, detect and fail explicitly in the event of a delalloc extent during the extent shift. The implementation does not support delalloc extents and the caller is expected to prevent this scenario in advance as is done by collapse. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-23 05:39:05 +00:00
/*
* Writeback and invalidate cache for the remainder of the file as we're
* about to shift down every extent from offset to EOF.
xfs: writeback and inval. file range to be shifted by collapse The collapse range operation currently writes the entire file before starting the collapse to avoid changes in the in-core extent list due to writeback causing the extent count to change. Now that collapse range is fsb based rather than extent index based it can sustain changes in the extent list during the shift sequence without disruption. Modify xfs_collapse_file_space() to writeback and invalidate pages associated with the range of the file to be shifted. xfs_free_file_space() currently has similar behavior, but the space free need only affect the region of the file that is freed and this could change in the future. Also update the comments to reflect the current implementation. We retain the eofblocks trim permanently as a best option for dealing with delalloc extents. We don't shift delalloc extents because this scenario only occurs with post-eof preallocation (since data must be flushed such that the cache can be invalidated and data can be shifted). That means said space must also be initialized before being shifted into the accessible region of the file only to be immediately truncated off as the last part of the collapse. In other words, the eofblocks trim will happen anyways, we just run it first to ensure the file remains in a consistent state throughout the collapse. Finally, detect and fail explicitly in the event of a delalloc extent during the extent shift. The implementation does not support delalloc extents and the caller is expected to prevent this scenario in advance as is done by collapse. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-23 05:39:05 +00:00
*/
error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
offset, -1);
xfs: writeback and inval. file range to be shifted by collapse The collapse range operation currently writes the entire file before starting the collapse to avoid changes in the in-core extent list due to writeback causing the extent count to change. Now that collapse range is fsb based rather than extent index based it can sustain changes in the extent list during the shift sequence without disruption. Modify xfs_collapse_file_space() to writeback and invalidate pages associated with the range of the file to be shifted. xfs_free_file_space() currently has similar behavior, but the space free need only affect the region of the file that is freed and this could change in the future. Also update the comments to reflect the current implementation. We retain the eofblocks trim permanently as a best option for dealing with delalloc extents. We don't shift delalloc extents because this scenario only occurs with post-eof preallocation (since data must be flushed such that the cache can be invalidated and data can be shifted). That means said space must also be initialized before being shifted into the accessible region of the file only to be immediately truncated off as the last part of the collapse. In other words, the eofblocks trim will happen anyways, we just run it first to ensure the file remains in a consistent state throughout the collapse. Finally, detect and fail explicitly in the event of a delalloc extent during the extent shift. The implementation does not support delalloc extents and the caller is expected to prevent this scenario in advance as is done by collapse. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-09-23 05:39:05 +00:00
if (error)
return error;
error = invalidate_inode_pages2_range(VFS_I(ip)->i_mapping,
offset >> PAGE_CACHE_SHIFT, -1);
if (error)
return error;
/*
* The extent shiting code works on extent granularity. So, if
* stop_fsb is not the starting block of extent, we need to split
* the extent at stop_fsb.
*/
if (direction == SHIFT_RIGHT) {
error = xfs_bmap_split_extent(ip, stop_fsb);
if (error)
return error;
}
while (!error && !done) {
tp = xfs_trans_alloc(mp, XFS_TRANS_DIOSTRAT);
/*
* We would need to reserve permanent block for transaction.
* This will come into picture when after shifting extent into
* hole we found that adjacent extents can be merged which
* may lead to freeing of a block during record update.
*/
error = xfs_trans_reserve(tp, &M_RES(mp)->tr_write,
XFS_DIOSTRAT_SPACE_RES(mp, 0), 0);
if (error) {
xfs_trans_cancel(tp);
break;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
error = xfs_trans_reserve_quota(tp, mp, ip->i_udquot,
ip->i_gdquot, ip->i_pdquot,
XFS_DIOSTRAT_SPACE_RES(mp, 0), 0,
XFS_QMOPT_RES_REGBLKS);
if (error)
goto out_trans_cancel;
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_bmap_init(&free_list, &first_block);
/*
* We are using the write transaction in which max 2 bmbt
* updates are allowed
*/
error = xfs_bmap_shift_extents(tp, ip, &next_fsb, shift_fsb,
&done, stop_fsb, &first_block, &free_list,
direction, XFS_BMAP_MAX_SHIFT_EXTENTS);
if (error)
goto out_bmap_cancel;
error = xfs_bmap_finish(&tp, &free_list, &committed);
if (error)
goto out_bmap_cancel;
error = xfs_trans_commit(tp);
}
return error;
out_bmap_cancel:
xfs_bmap_cancel(&free_list);
out_trans_cancel:
xfs_trans_cancel(tp);
return error;
}
/*
* xfs_collapse_file_space()
* This routine frees disk space and shift extent for the given file.
* The first thing we do is to free data blocks in the specified range
* by calling xfs_free_file_space(). It would also sync dirty data
* and invalidate page cache over the region on which collapse range
* is working. And Shift extent records to the left to cover a hole.
* RETURNS:
* 0 on success
* errno on error
*
*/
int
xfs_collapse_file_space(
struct xfs_inode *ip,
xfs_off_t offset,
xfs_off_t len)
{
int error;
ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
trace_xfs_collapse_file_space(ip);
error = xfs_free_file_space(ip, offset, len);
if (error)
return error;
return xfs_shift_file_space(ip, offset, len, SHIFT_LEFT);
}
/*
* xfs_insert_file_space()
* This routine create hole space by shifting extents for the given file.
* The first thing we do is to sync dirty data and invalidate page cache
* over the region on which insert range is working. And split an extent
* to two extents at given offset by calling xfs_bmap_split_extent.
* And shift all extent records which are laying between [offset,
* last allocated extent] to the right to reserve hole range.
* RETURNS:
* 0 on success
* errno on error
*/
int
xfs_insert_file_space(
struct xfs_inode *ip,
loff_t offset,
loff_t len)
{
ASSERT(xfs_isilocked(ip, XFS_IOLOCK_EXCL));
trace_xfs_insert_file_space(ip);
return xfs_shift_file_space(ip, offset, len, SHIFT_RIGHT);
}
/*
* We need to check that the format of the data fork in the temporary inode is
* valid for the target inode before doing the swap. This is not a problem with
* attr1 because of the fixed fork offset, but attr2 has a dynamically sized
* data fork depending on the space the attribute fork is taking so we can get
* invalid formats on the target inode.
*
* E.g. target has space for 7 extents in extent format, temp inode only has
* space for 6. If we defragment down to 7 extents, then the tmp format is a
* btree, but when swapped it needs to be in extent format. Hence we can't just
* blindly swap data forks on attr2 filesystems.
*
* Note that we check the swap in both directions so that we don't end up with
* a corrupt temporary inode, either.
*
* Note that fixing the way xfs_fsr sets up the attribute fork in the source
* inode will prevent this situation from occurring, so all we do here is
* reject and log the attempt. basically we are putting the responsibility on
* userspace to get this right.
*/
static int
xfs_swap_extents_check_format(
xfs_inode_t *ip, /* target inode */
xfs_inode_t *tip) /* tmp inode */
{
/* Should never get a local format */
if (ip->i_d.di_format == XFS_DINODE_FMT_LOCAL ||
tip->i_d.di_format == XFS_DINODE_FMT_LOCAL)
return -EINVAL;
/*
* if the target inode has less extents that then temporary inode then
* why did userspace call us?
*/
if (ip->i_d.di_nextents < tip->i_d.di_nextents)
return -EINVAL;
/*
* if the target inode is in extent form and the temp inode is in btree
* form then we will end up with the target inode in the wrong format
* as we already know there are less extents in the temp inode.
*/
if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
tip->i_d.di_format == XFS_DINODE_FMT_BTREE)
return -EINVAL;
/* Check temp in extent form to max in target */
if (tip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) >
XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK))
return -EINVAL;
/* Check target in extent form to max in temp */
if (ip->i_d.di_format == XFS_DINODE_FMT_EXTENTS &&
XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) >
XFS_IFORK_MAXEXT(tip, XFS_DATA_FORK))
return -EINVAL;
/*
* If we are in a btree format, check that the temp root block will fit
* in the target and that it has enough extents to be in btree format
* in the target.
*
* Note that we have to be careful to allow btree->extent conversions
* (a common defrag case) which will occur when the temp inode is in
* extent format...
*/
if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE) {
if (XFS_IFORK_BOFF(ip) &&
XFS_BMAP_BMDR_SPACE(tip->i_df.if_broot) > XFS_IFORK_BOFF(ip))
return -EINVAL;
if (XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) <=
XFS_IFORK_MAXEXT(ip, XFS_DATA_FORK))
return -EINVAL;
}
/* Reciprocal target->temp btree format checks */
if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE) {
if (XFS_IFORK_BOFF(tip) &&
XFS_BMAP_BMDR_SPACE(ip->i_df.if_broot) > XFS_IFORK_BOFF(tip))
return -EINVAL;
if (XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) <=
XFS_IFORK_MAXEXT(tip, XFS_DATA_FORK))
return -EINVAL;
}
return 0;
}
static int
xfs_swap_extent_flush(
struct xfs_inode *ip)
{
int error;
error = filemap_write_and_wait(VFS_I(ip)->i_mapping);
if (error)
return error;
truncate_pagecache_range(VFS_I(ip), 0, -1);
/* Verify O_DIRECT for ftmp */
if (VFS_I(ip)->i_mapping->nrpages)
return -EINVAL;
return 0;
}
int
xfs_swap_extents(
xfs_inode_t *ip, /* target inode */
xfs_inode_t *tip, /* tmp inode */
xfs_swapext_t *sxp)
{
xfs_mount_t *mp = ip->i_mount;
xfs_trans_t *tp;
xfs_bstat_t *sbp = &sxp->sx_stat;
xfs_ifork_t *tempifp, *ifp, *tifp;
int src_log_flags, target_log_flags;
int error = 0;
int aforkblks = 0;
int taforkblks = 0;
__uint64_t tmp;
int lock_flags;
tempifp = kmem_alloc(sizeof(xfs_ifork_t), KM_MAYFAIL);
if (!tempifp) {
error = -ENOMEM;
goto out;
}
/*
* Lock the inodes against other IO, page faults and truncate to
* begin with. Then we can ensure the inodes are flushed and have no
* page cache safely. Once we have done this we can take the ilocks and
* do the rest of the checks.
*/
lock_flags = XFS_IOLOCK_EXCL | XFS_MMAPLOCK_EXCL;
xfs_lock_two_inodes(ip, tip, XFS_IOLOCK_EXCL);
xfs_lock_two_inodes(ip, tip, XFS_MMAPLOCK_EXCL);
/* Verify that both files have the same format */
if ((ip->i_d.di_mode & S_IFMT) != (tip->i_d.di_mode & S_IFMT)) {
error = -EINVAL;
goto out_unlock;
}
/* Verify both files are either real-time or non-realtime */
if (XFS_IS_REALTIME_INODE(ip) != XFS_IS_REALTIME_INODE(tip)) {
error = -EINVAL;
goto out_unlock;
}
error = xfs_swap_extent_flush(ip);
if (error)
goto out_unlock;
error = xfs_swap_extent_flush(tip);
if (error)
goto out_unlock;
tp = xfs_trans_alloc(mp, XFS_TRANS_SWAPEXT);
error = xfs_trans_reserve(tp, &M_RES(mp)->tr_ichange, 0, 0);
if (error) {
xfs_trans_cancel(tp);
goto out_unlock;
}
/*
* Lock and join the inodes to the tansaction so that transaction commit
* or cancel will unlock the inodes from this point onwards.
*/
xfs_lock_two_inodes(ip, tip, XFS_ILOCK_EXCL);
lock_flags |= XFS_ILOCK_EXCL;
xfs_trans_ijoin(tp, ip, lock_flags);
xfs_trans_ijoin(tp, tip, lock_flags);
/* Verify all data are being swapped */
if (sxp->sx_offset != 0 ||
sxp->sx_length != ip->i_d.di_size ||
sxp->sx_length != tip->i_d.di_size) {
error = -EFAULT;
goto out_trans_cancel;
}
trace_xfs_swap_extent_before(ip, 0);
trace_xfs_swap_extent_before(tip, 1);
/* check inode formats now that data is flushed */
error = xfs_swap_extents_check_format(ip, tip);
if (error) {
xfs_notice(mp,
"%s: inode 0x%llx format is incompatible for exchanging.",
__func__, ip->i_ino);
goto out_trans_cancel;
}
/*
* Compare the current change & modify times with that
* passed in. If they differ, we abort this swap.
* This is the mechanism used to ensure the calling
* process that the file was not changed out from
* under it.
*/
if ((sbp->bs_ctime.tv_sec != VFS_I(ip)->i_ctime.tv_sec) ||
(sbp->bs_ctime.tv_nsec != VFS_I(ip)->i_ctime.tv_nsec) ||
(sbp->bs_mtime.tv_sec != VFS_I(ip)->i_mtime.tv_sec) ||
(sbp->bs_mtime.tv_nsec != VFS_I(ip)->i_mtime.tv_nsec)) {
error = -EBUSY;
goto out_trans_cancel;
}
/*
* Count the number of extended attribute blocks
*/
if ( ((XFS_IFORK_Q(ip) != 0) && (ip->i_d.di_anextents > 0)) &&
(ip->i_d.di_aformat != XFS_DINODE_FMT_LOCAL)) {
error = xfs_bmap_count_blocks(tp, ip, XFS_ATTR_FORK, &aforkblks);
if (error)
goto out_trans_cancel;
}
if ( ((XFS_IFORK_Q(tip) != 0) && (tip->i_d.di_anextents > 0)) &&
(tip->i_d.di_aformat != XFS_DINODE_FMT_LOCAL)) {
error = xfs_bmap_count_blocks(tp, tip, XFS_ATTR_FORK,
&taforkblks);
if (error)
goto out_trans_cancel;
}
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:44 +00:00
/*
* Before we've swapped the forks, lets set the owners of the forks
* appropriately. We have to do this as we are demand paging the btree
* buffers, and so the validation done on read will expect the owner
* field to be correctly set. Once we change the owners, we can swap the
* inode forks.
*
* Note the trickiness in setting the log flags - we set the owner log
* flag on the opposite inode (i.e. the inode we are setting the new
* owner to be) because once we swap the forks and log that, log
* recovery is going to see the fork as owned by the swapped inode,
* not the pre-swapped inodes.
*/
src_log_flags = XFS_ILOG_CORE;
target_log_flags = XFS_ILOG_CORE;
if (ip->i_d.di_version == 3 &&
ip->i_d.di_format == XFS_DINODE_FMT_BTREE) {
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:45 +00:00
target_log_flags |= XFS_ILOG_DOWNER;
error = xfs_bmbt_change_owner(tp, ip, XFS_DATA_FORK,
tip->i_ino, NULL);
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:44 +00:00
if (error)
goto out_trans_cancel;
}
if (tip->i_d.di_version == 3 &&
tip->i_d.di_format == XFS_DINODE_FMT_BTREE) {
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:45 +00:00
src_log_flags |= XFS_ILOG_DOWNER;
error = xfs_bmbt_change_owner(tp, tip, XFS_DATA_FORK,
ip->i_ino, NULL);
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:44 +00:00
if (error)
goto out_trans_cancel;
}
/*
* Swap the data forks of the inodes
*/
ifp = &ip->i_df;
tifp = &tip->i_df;
*tempifp = *ifp; /* struct copy */
*ifp = *tifp; /* struct copy */
*tifp = *tempifp; /* struct copy */
/*
* Fix the on-disk inode values
*/
tmp = (__uint64_t)ip->i_d.di_nblocks;
ip->i_d.di_nblocks = tip->i_d.di_nblocks - taforkblks + aforkblks;
tip->i_d.di_nblocks = tmp + taforkblks - aforkblks;
tmp = (__uint64_t) ip->i_d.di_nextents;
ip->i_d.di_nextents = tip->i_d.di_nextents;
tip->i_d.di_nextents = tmp;
tmp = (__uint64_t) ip->i_d.di_format;
ip->i_d.di_format = tip->i_d.di_format;
tip->i_d.di_format = tmp;
/*
* The extents in the source inode could still contain speculative
* preallocation beyond EOF (e.g. the file is open but not modified
* while defrag is in progress). In that case, we need to copy over the
* number of delalloc blocks the data fork in the source inode is
* tracking beyond EOF so that when the fork is truncated away when the
* temporary inode is unlinked we don't underrun the i_delayed_blks
* counter on that inode.
*/
ASSERT(tip->i_delayed_blks == 0);
tip->i_delayed_blks = ip->i_delayed_blks;
ip->i_delayed_blks = 0;
switch (ip->i_d.di_format) {
case XFS_DINODE_FMT_EXTENTS:
/* If the extents fit in the inode, fix the
* pointer. Otherwise it's already NULL or
* pointing to the extent.
*/
if (ip->i_d.di_nextents <= XFS_INLINE_EXTS) {
ifp->if_u1.if_extents =
ifp->if_u2.if_inline_ext;
}
src_log_flags |= XFS_ILOG_DEXT;
break;
case XFS_DINODE_FMT_BTREE:
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:44 +00:00
ASSERT(ip->i_d.di_version < 3 ||
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:45 +00:00
(src_log_flags & XFS_ILOG_DOWNER));
src_log_flags |= XFS_ILOG_DBROOT;
break;
}
switch (tip->i_d.di_format) {
case XFS_DINODE_FMT_EXTENTS:
/* If the extents fit in the inode, fix the
* pointer. Otherwise it's already NULL or
* pointing to the extent.
*/
if (tip->i_d.di_nextents <= XFS_INLINE_EXTS) {
tifp->if_u1.if_extents =
tifp->if_u2.if_inline_ext;
}
target_log_flags |= XFS_ILOG_DEXT;
break;
case XFS_DINODE_FMT_BTREE:
target_log_flags |= XFS_ILOG_DBROOT;
xfs: swap extents operations for CRC filesystems For CRC enabled filesystems, we can't just swap inode forks from one inode to another when defragmenting a file - the blocks in the inode fork bmap btree contain pointers back to the owner inode. Hence if we are to swap the inode forks we have to atomically modify every block in the btree during the transaction. We are doing an entire fork swap here, so we could create a new transaction item type that indicates we are changing the owner of a certain structure from one value to another. If we combine this with ordered buffer logging to modify all the buffers in the tree, then we can change the buffers in the tree without needing log space for the operation. However, this then requires log recovery to perform the modification of the owner information of the objects/structures in question. This does introduce some interesting ordering details into recovery: we have to make sure that the owner change replay occurs after the change that moves the objects is made, not before. Hence we can't use a separate log item for this as we have no guarantee of strict ordering between multiple items in the log due to the relogging action of asynchronous transaction commits. Hence there is no "generic" method we can use for changing the ownership of arbitrary metadata structures. For inode forks, however, there is a simple method of communicating that the fork contents need the owner rewritten - we can pass a inode log format flag for the fork for the transaction that does a fork swap. This flag will then follow the inode fork through relogging actions so when the swap actually gets replayed the ownership can be changed immediately by log recovery. So that gives us a simple method of "whole fork" exchange between two inodes. This is relatively simple to implement, so it makes sense to do this as an initial implementation to support xfs_fsr on CRC enabled filesytems in the same manner as we do on existing filesystems. This commit introduces the swapext driven functionality, the recovery functionality will be in a separate patch. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:44 +00:00
ASSERT(tip->i_d.di_version < 3 ||
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:45 +00:00
(target_log_flags & XFS_ILOG_DOWNER));
break;
}
xfs_trans_log_inode(tp, ip, src_log_flags);
xfs_trans_log_inode(tp, tip, target_log_flags);
/*
* If this is a synchronous mount, make sure that the
* transaction goes to disk before returning to the user.
*/
if (mp->m_flags & XFS_MOUNT_WSYNC)
xfs_trans_set_sync(tp);
error = xfs_trans_commit(tp);
trace_xfs_swap_extent_after(ip, 0);
trace_xfs_swap_extent_after(tip, 1);
out:
kmem_free(tempifp);
return error;
out_unlock:
xfs_iunlock(ip, lock_flags);
xfs_iunlock(tip, lock_flags);
goto out;
out_trans_cancel:
xfs_trans_cancel(tp);
goto out;
}