FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-22 09:22:37 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
0ab5c85d68
linux/drivers/regulator/ti-abb-regulator.c

908 lines
24 KiB
C
Raw Normal View History

regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
/*
* Texas Instruments SoC Adaptive Body Bias(ABB) Regulator
*
* Copyright (C) 2011 Texas Instruments, Inc.
* Mike Turquette <mturquette@ti.com>
*
* Copyright (C) 2012-2013 Texas Instruments, Inc.
* Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
* Nishanth Menon <nm@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
/*
* ABB LDO operating states:
* NOMINAL_OPP: bypasses the ABB LDO
* FAST_OPP: sets ABB LDO to Forward Body-Bias
* SLOW_OPP: sets ABB LDO to Reverse Body-Bias
*/
#define TI_ABB_NOMINAL_OPP 0
#define TI_ABB_FAST_OPP 1
#define TI_ABB_SLOW_OPP 3
/**
* struct ti_abb_info - ABB information per voltage setting
* @opp_sel: one of TI_ABB macro
* @vset: (optional) vset value that LDOVBB needs to be overriden with.
*
* Array of per voltage entries organized in the same order as regulator_desc's
* volt_table list. (selector is used to index from this array)
*/
struct ti_abb_info {
u32 opp_sel;
u32 vset;
};
/**
* struct ti_abb_reg - Register description for ABB block
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
* @setup_off: setup register offset from base
* @control_off: control register offset from base
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
* @sr2_wtcnt_value_mask: setup register- sr2_wtcnt_value mask
* @fbb_sel_mask: setup register- FBB sel mask
* @rbb_sel_mask: setup register- RBB sel mask
* @sr2_en_mask: setup register- enable mask
* @opp_change_mask: control register - mask to trigger LDOVBB change
* @opp_sel_mask: control register - mask for mode to operate
*/
struct ti_abb_reg {
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
u32 setup_off;
u32 control_off;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
/* Setup register fields */
u32 sr2_wtcnt_value_mask;
u32 fbb_sel_mask;
u32 rbb_sel_mask;
u32 sr2_en_mask;
/* Control register fields */
u32 opp_change_mask;
u32 opp_sel_mask;
};
/**
* struct ti_abb - ABB instance data
* @rdesc: regulator descriptor
* @clk: clock(usually sysclk) supplying ABB block
* @base: base address of ABB block
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
* @setup_reg: setup register of ABB block
* @control_reg: control register of ABB block
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
* @int_base: interrupt register base address
* @efuse_base: (optional) efuse base address for ABB modes
* @ldo_base: (optional) LDOVBB vset override base address
* @regs: pointer to struct ti_abb_reg for ABB block
* @txdone_mask: mask on int_base for tranxdone interrupt
* @ldovbb_override_mask: mask to ldo_base for overriding default LDO VBB
* vset with value from efuse
* @ldovbb_vset_mask: mask to ldo_base for providing the VSET override
* @info: array to per voltage ABB configuration
* @current_info_idx: current index to info
* @settling_time: SoC specific settling time for LDO VBB
*/
struct ti_abb {
struct regulator_desc rdesc;
struct clk *clk;
void __iomem *base;
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
void __iomem *setup_reg;
void __iomem *control_reg;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
void __iomem *int_base;
void __iomem *efuse_base;
void __iomem *ldo_base;
const struct ti_abb_reg *regs;
u32 txdone_mask;
u32 ldovbb_override_mask;
u32 ldovbb_vset_mask;
struct ti_abb_info *info;
int current_info_idx;
u32 settling_time;
};
/**
* ti_abb_rmw() - handy wrapper to set specific register bits
* @mask: mask for register field
* @value: value shifted to mask location and written
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
* @reg: register address
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
*
* Return: final register value (may be unused)
*/
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
static inline u32 ti_abb_rmw(u32 mask, u32 value, void __iomem *reg)
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
{
u32 val;
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
val = readl(reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
val &= ~mask;
val |= (value << __ffs(mask)) & mask;
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
writel(val, reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
return val;
}
/**
* ti_abb_check_txdone() - handy wrapper to check ABB tranxdone status
* @abb: pointer to the abb instance
*
* Return: true or false
*/
static inline bool ti_abb_check_txdone(const struct ti_abb *abb)
{
return !!(readl(abb->int_base) & abb->txdone_mask);
}
/**
* ti_abb_clear_txdone() - handy wrapper to clear ABB tranxdone status
* @abb: pointer to the abb instance
*/
static inline void ti_abb_clear_txdone(const struct ti_abb *abb)
{
writel(abb->txdone_mask, abb->int_base);
};
/**
* ti_abb_wait_tranx() - waits for ABB tranxdone event
* @dev: device
* @abb: pointer to the abb instance
*
* Return: 0 on success or -ETIMEDOUT if the event is not cleared on time.
*/
static int ti_abb_wait_txdone(struct device *dev, struct ti_abb *abb)
{
int timeout = 0;
bool status;
while (timeout++ <= abb->settling_time) {
status = ti_abb_check_txdone(abb);
if (status)
break;
udelay(1);
}
if (timeout > abb->settling_time) {
dev_warn_ratelimited(dev,
"%s:TRANXDONE timeout(%duS) int=0x%08x\n",
__func__, timeout, readl(abb->int_base));
return -ETIMEDOUT;
}
return 0;
}
/**
* ti_abb_clear_all_txdone() - clears ABB tranxdone event
* @dev: device
* @abb: pointer to the abb instance
*
* Return: 0 on success or -ETIMEDOUT if the event is not cleared on time.
*/
static int ti_abb_clear_all_txdone(struct device *dev, const struct ti_abb *abb)
{
int timeout = 0;
bool status;
while (timeout++ <= abb->settling_time) {
ti_abb_clear_txdone(abb);
status = ti_abb_check_txdone(abb);
if (!status)
break;
udelay(1);
}
if (timeout > abb->settling_time) {
dev_warn_ratelimited(dev,
"%s:TRANXDONE timeout(%duS) int=0x%08x\n",
__func__, timeout, readl(abb->int_base));
return -ETIMEDOUT;
}
return 0;
}
/**
* ti_abb_program_ldovbb() - program LDOVBB register for override value
* @dev: device
* @abb: pointer to the abb instance
* @info: ABB info to program
*/
static void ti_abb_program_ldovbb(struct device *dev, const struct ti_abb *abb,
struct ti_abb_info *info)
{
u32 val;
val = readl(abb->ldo_base);
/* clear up previous values */
val &= ~(abb->ldovbb_override_mask | abb->ldovbb_vset_mask);
switch (info->opp_sel) {
case TI_ABB_SLOW_OPP:
case TI_ABB_FAST_OPP:
val |= abb->ldovbb_override_mask;
val |= info->vset << __ffs(abb->ldovbb_vset_mask);
break;
}
writel(val, abb->ldo_base);
}
/**
* ti_abb_set_opp() - Setup ABB and LDO VBB for required bias
* @rdev: regulator device
* @abb: pointer to the abb instance
* @info: ABB info to program
*
* Return: 0 on success or appropriate error value when fails
*/
static int ti_abb_set_opp(struct regulator_dev *rdev, struct ti_abb *abb,
struct ti_abb_info *info)
{
const struct ti_abb_reg *regs = abb->regs;
struct device *dev = &rdev->dev;
int ret;
ret = ti_abb_clear_all_txdone(dev, abb);
if (ret)
goto out;
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
ti_abb_rmw(regs->fbb_sel_mask | regs->rbb_sel_mask, 0, abb->setup_reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
switch (info->opp_sel) {
case TI_ABB_SLOW_OPP:
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
ti_abb_rmw(regs->rbb_sel_mask, 1, abb->setup_reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
break;
case TI_ABB_FAST_OPP:
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
ti_abb_rmw(regs->fbb_sel_mask, 1, abb->setup_reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
break;
}
/* program next state of ABB ldo */
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
ti_abb_rmw(regs->opp_sel_mask, info->opp_sel, abb->control_reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
regulator: ti-abb: Fix bias voltage glitch in transition to bypass mode As documented in Application Note SWPA117 v2.1(NDA), LDO override has a requirement that when switching from Bias active + override active mode(FBB/RBB) to Bypass(nominal) mode, LDO reset must be performed *after* LDO transitions to Bypass(nominal) mode. The same rule in reverse applies when switching from a ABB bypass mode to ABB enabled - LDO override *must* be performed prior to transition to required ABB mode, if we do not do that, the same glitch takes place. Currently while transitioning to ABB bypass, we reset the LDO overide prior to the transition which causes a few milliseconds where ABB LDO voltage could go all the way to 800mV(based on SoC process node), during this period, the delta voltage between VDD rail and VBB rail could cause the system to improperly function. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-09-27 13:25:14 +00:00
/*
* program LDO VBB vset override if needed for !bypass mode
* XXX: Do not switch sequence - for !bypass, LDO override reset *must*
* be performed *before* switch to bias mode else VBB glitches.
*/
if (abb->ldo_base && info->opp_sel != TI_ABB_NOMINAL_OPP)
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
ti_abb_program_ldovbb(dev, abb, info);
/* Initiate ABB ldo change */
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
ti_abb_rmw(regs->opp_change_mask, 1, abb->control_reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
/* Wait for ABB LDO to complete transition to new Bias setting */
ret = ti_abb_wait_txdone(dev, abb);
if (ret)
goto out;
ret = ti_abb_clear_all_txdone(dev, abb);
if (ret)
goto out;
regulator: ti-abb: Fix bias voltage glitch in transition to bypass mode As documented in Application Note SWPA117 v2.1(NDA), LDO override has a requirement that when switching from Bias active + override active mode(FBB/RBB) to Bypass(nominal) mode, LDO reset must be performed *after* LDO transitions to Bypass(nominal) mode. The same rule in reverse applies when switching from a ABB bypass mode to ABB enabled - LDO override *must* be performed prior to transition to required ABB mode, if we do not do that, the same glitch takes place. Currently while transitioning to ABB bypass, we reset the LDO overide prior to the transition which causes a few milliseconds where ABB LDO voltage could go all the way to 800mV(based on SoC process node), during this period, the delta voltage between VDD rail and VBB rail could cause the system to improperly function. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-09-27 13:25:14 +00:00
/*
* Reset LDO VBB vset override bypass mode
* XXX: Do not switch sequence - for bypass, LDO override reset *must*
* be performed *after* switch to bypass else VBB glitches.
*/
if (abb->ldo_base && info->opp_sel == TI_ABB_NOMINAL_OPP)
ti_abb_program_ldovbb(dev, abb, info);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
out:
return ret;
}
/**
* ti_abb_set_voltage_sel() - regulator accessor function to set ABB LDO
* @rdev: regulator device
* @sel: selector to index into required ABB LDO settings (maps to
* regulator descriptor's volt_table)
*
* Return: 0 on success or appropriate error value when fails
*/
static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel)
{
const struct regulator_desc *desc = rdev->desc;
struct ti_abb *abb = rdev_get_drvdata(rdev);
struct device *dev = &rdev->dev;
struct ti_abb_info *info, *oinfo;
int ret = 0;
if (!abb) {
dev_err_ratelimited(dev, "%s: No regulator drvdata\n",
__func__);
return -ENODEV;
}
if (!desc->n_voltages || !abb->info) {
dev_err_ratelimited(dev,
"%s: No valid voltage table entries?\n",
__func__);
return -EINVAL;
}
if (sel >= desc->n_voltages) {
dev_err(dev, "%s: sel idx(%d) >= n_voltages(%d)\n", __func__,
sel, desc->n_voltages);
return -EINVAL;
}
/* If we are in the same index as we were, nothing to do here! */
if (sel == abb->current_info_idx) {
dev_dbg(dev, "%s: Already at sel=%d\n", __func__, sel);
return ret;
}
/* If data is exactly the same, then just update index, no change */
info = &abb->info[sel];
oinfo = &abb->info[abb->current_info_idx];
if (!memcmp(info, oinfo, sizeof(*info))) {
dev_dbg(dev, "%s: Same data new idx=%d, old idx=%d\n", __func__,
sel, abb->current_info_idx);
goto out;
}
ret = ti_abb_set_opp(rdev, abb, info);
out:
if (!ret)
abb->current_info_idx = sel;
else
dev_err_ratelimited(dev,
"%s: Volt[%d] idx[%d] mode[%d] Fail(%d)\n",
__func__, desc->volt_table[sel], sel,
info->opp_sel, ret);
return ret;
}
/**
* ti_abb_get_voltage_sel() - Regulator accessor to get current ABB LDO setting
* @rdev: regulator device
*
* Return: 0 on success or appropriate error value when fails
*/
static int ti_abb_get_voltage_sel(struct regulator_dev *rdev)
{
const struct regulator_desc *desc = rdev->desc;
struct ti_abb *abb = rdev_get_drvdata(rdev);
struct device *dev = &rdev->dev;
if (!abb) {
dev_err_ratelimited(dev, "%s: No regulator drvdata\n",
__func__);
return -ENODEV;
}
if (!desc->n_voltages || !abb->info) {
dev_err_ratelimited(dev,
"%s: No valid voltage table entries?\n",
__func__);
return -EINVAL;
}
regulator: ti-abb: Fix off-by-one valid range checking for abb->current_info_idx abb->current_info_idx is used as array subscript to access volt_table, thus the valid value range should be 0 ... desc->n_voltages - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-04 14:02:27 +00:00
if (abb->current_info_idx >= (int)desc->n_voltages) {
dev_err(dev, "%s: Corrupted data? idx(%d) >= n_voltages(%d)\n",
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
__func__, abb->current_info_idx, desc->n_voltages);
return -EINVAL;
}
return abb->current_info_idx;
}
/**
* ti_abb_init_timings() - setup ABB clock timing for the current platform
* @dev: device
* @abb: pointer to the abb instance
*
* Return: 0 if timing is updated, else returns error result.
*/
static int ti_abb_init_timings(struct device *dev, struct ti_abb *abb)
{
u32 clock_cycles;
u32 clk_rate, sr2_wt_cnt_val, cycle_rate;
const struct ti_abb_reg *regs = abb->regs;
int ret;
char *pname = "ti,settling-time";
/* read device tree properties */
ret = of_property_read_u32(dev->of_node, pname, &abb->settling_time);
if (ret) {
dev_err(dev, "Unable to get property '%s'(%d)\n", pname, ret);
return ret;
}
/* ABB LDO cannot be settle in 0 time */
if (!abb->settling_time) {
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
return -EINVAL;
}
pname = "ti,clock-cycles";
ret = of_property_read_u32(dev->of_node, pname, &clock_cycles);
if (ret) {
dev_err(dev, "Unable to get property '%s'(%d)\n", pname, ret);
return ret;
}
/* ABB LDO cannot be settle in 0 clock cycles */
if (!clock_cycles) {
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
return -EINVAL;
}
abb->clk = devm_clk_get(dev, NULL);
if (IS_ERR(abb->clk)) {
ret = PTR_ERR(abb->clk);
dev_err(dev, "%s: Unable to get clk(%d)\n", __func__, ret);
return ret;
}
/*
* SR2_WTCNT_VALUE is the settling time for the ABB ldo after a
* transition and must be programmed with the correct time at boot.
* The value programmed into the register is the number of SYS_CLK
* clock cycles that match a given wall time profiled for the ldo.
* This value depends on:
* settling time of ldo in micro-seconds (varies per OMAP family)
* # of clock cycles per SYS_CLK period (varies per OMAP family)
* the SYS_CLK frequency in MHz (varies per board)
* The formula is:
*
* ldo settling time (in micro-seconds)
* SR2_WTCNT_VALUE = ------------------------------------------
* (# system clock cycles) * (sys_clk period)
*
* Put another way:
*
* SR2_WTCNT_VALUE = settling time / (# SYS_CLK cycles / SYS_CLK rate))
*
* To avoid dividing by zero multiply both "# clock cycles" and
* "settling time" by 10 such that the final result is the one we want.
*/
/* Convert SYS_CLK rate to MHz & prevent divide by zero */
clk_rate = DIV_ROUND_CLOSEST(clk_get_rate(abb->clk), 1000000);
/* Calculate cycle rate */
cycle_rate = DIV_ROUND_CLOSEST(clock_cycles * 10, clk_rate);
/* Calulate SR2_WTCNT_VALUE */
sr2_wt_cnt_val = DIV_ROUND_CLOSEST(abb->settling_time * 10, cycle_rate);
dev_dbg(dev, "%s: Clk_rate=%ld, sr2_cnt=0x%08x\n", __func__,
clk_get_rate(abb->clk), sr2_wt_cnt_val);
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
ti_abb_rmw(regs->sr2_wtcnt_value_mask, sr2_wt_cnt_val, abb->setup_reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
return 0;
}
/**
* ti_abb_init_table() - Initialize ABB table from device tree
* @dev: device
* @abb: pointer to the abb instance
* @rinit_data: regulator initdata
*
* Return: 0 on success or appropriate error value when fails
*/
static int ti_abb_init_table(struct device *dev, struct ti_abb *abb,
struct regulator_init_data *rinit_data)
{
struct ti_abb_info *info;
const u32 num_values = 6;
char *pname = "ti,abb_info";
regulator: ti-abb-regulator: do not open-code counting and access of dt array elements Open coding the counting of elements in a dt-property is abstracted by the newly introduced of_property_count_uXX_elems functions. Additionally the raw iteration over the states element exposes the endian conversion and dtb-format details, which according to Mark Rutland "would be nice to limit [...] to of_ helper functions". Thus change ti-abb-regulator to use the helper for element counting and of_property_read_u32_index for retrieval of individual values. This makes it possible to remove the raw access to the property entirely. Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12 00:01:42 +00:00
u32 i;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
unsigned int *volt_table;
regulator: ti-abb-regulator: do not open-code counting and access of dt array elements Open coding the counting of elements in a dt-property is abstracted by the newly introduced of_property_count_uXX_elems functions. Additionally the raw iteration over the states element exposes the endian conversion and dtb-format details, which according to Mark Rutland "would be nice to limit [...] to of_ helper functions". Thus change ti-abb-regulator to use the helper for element counting and of_property_read_u32_index for retrieval of individual values. This makes it possible to remove the raw access to the property entirely. Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12 00:01:42 +00:00
int num_entries, min_uV = INT_MAX, max_uV = 0;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
struct regulation_constraints *c = &rinit_data->constraints;
/*
* Each abb_info is a set of n-tuple, where n is num_values, consisting
* of voltage and a set of detection logic for ABB information for that
* voltage to apply.
*/
regulator: ti-abb-regulator: do not open-code counting and access of dt array elements Open coding the counting of elements in a dt-property is abstracted by the newly introduced of_property_count_uXX_elems functions. Additionally the raw iteration over the states element exposes the endian conversion and dtb-format details, which according to Mark Rutland "would be nice to limit [...] to of_ helper functions". Thus change ti-abb-regulator to use the helper for element counting and of_property_read_u32_index for retrieval of individual values. This makes it possible to remove the raw access to the property entirely. Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12 00:01:42 +00:00
num_entries = of_property_count_u32_elems(dev->of_node, pname);
if (num_entries < 0) {
dev_err(dev, "No '%s' property?\n", pname);
regulator: ti-abb: Do not hardcode return value Propagate the error value returned by the function instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-18 10:40:58 +00:00
return num_entries;
regulator: ti-abb-regulator: do not open-code counting and access of dt array elements Open coding the counting of elements in a dt-property is abstracted by the newly introduced of_property_count_uXX_elems functions. Additionally the raw iteration over the states element exposes the endian conversion and dtb-format details, which according to Mark Rutland "would be nice to limit [...] to of_ helper functions". Thus change ti-abb-regulator to use the helper for element counting and of_property_read_u32_index for retrieval of individual values. This makes it possible to remove the raw access to the property entirely. Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12 00:01:42 +00:00
}
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
if (!num_entries || (num_entries % num_values)) {
dev_err(dev, "All '%s' list entries need %d vals\n", pname,
num_values);
return -EINVAL;
}
num_entries /= num_values;
info = devm_kzalloc(dev, sizeof(*info) * num_entries, GFP_KERNEL);
if (!info) {
dev_err(dev, "Can't allocate info table for '%s' property\n",
pname);
return -ENOMEM;
}
abb->info = info;
volt_table = devm_kzalloc(dev, sizeof(unsigned int) * num_entries,
GFP_KERNEL);
if (!volt_table) {
dev_err(dev, "Can't allocate voltage table for '%s' property\n",
pname);
return -ENOMEM;
}
abb->rdesc.n_voltages = num_entries;
abb->rdesc.volt_table = volt_table;
/* We do not know where the OPP voltage is at the moment */
abb->current_info_idx = -EINVAL;
for (i = 0; i < num_entries; i++, info++, volt_table++) {
u32 efuse_offset, rbb_mask, fbb_mask, vset_mask;
u32 efuse_val;
/* NOTE: num_values should equal to entries picked up here */
regulator: ti-abb-regulator: do not open-code counting and access of dt array elements Open coding the counting of elements in a dt-property is abstracted by the newly introduced of_property_count_uXX_elems functions. Additionally the raw iteration over the states element exposes the endian conversion and dtb-format details, which according to Mark Rutland "would be nice to limit [...] to of_ helper functions". Thus change ti-abb-regulator to use the helper for element counting and of_property_read_u32_index for retrieval of individual values. This makes it possible to remove the raw access to the property entirely. Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12 00:01:42 +00:00
of_property_read_u32_index(dev->of_node, pname, i * num_values,
volt_table);
of_property_read_u32_index(dev->of_node, pname,
i * num_values + 1, &info->opp_sel);
of_property_read_u32_index(dev->of_node, pname,
i * num_values + 2, &efuse_offset);
of_property_read_u32_index(dev->of_node, pname,
i * num_values + 3, &rbb_mask);
of_property_read_u32_index(dev->of_node, pname,
i * num_values + 4, &fbb_mask);
of_property_read_u32_index(dev->of_node, pname,
i * num_values + 5, &vset_mask);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
dev_dbg(dev,
"[%d]v=%d ABB=%d ef=0x%x rbb=0x%x fbb=0x%x vset=0x%x\n",
i, *volt_table, info->opp_sel, efuse_offset, rbb_mask,
fbb_mask, vset_mask);
/* Find min/max for voltage set */
if (min_uV > *volt_table)
min_uV = *volt_table;
if (max_uV < *volt_table)
max_uV = *volt_table;
if (!abb->efuse_base) {
/* Ignore invalid data, but warn to help cleanup */
if (efuse_offset || rbb_mask || fbb_mask || vset_mask)
dev_err(dev, "prop '%s': v=%d,bad efuse/mask\n",
pname, *volt_table);
goto check_abb;
}
efuse_val = readl(abb->efuse_base + efuse_offset);
/* Use ABB recommendation from Efuse */
if (efuse_val & rbb_mask)
info->opp_sel = TI_ABB_SLOW_OPP;
else if (efuse_val & fbb_mask)
info->opp_sel = TI_ABB_FAST_OPP;
else if (rbb_mask || fbb_mask)
info->opp_sel = TI_ABB_NOMINAL_OPP;
dev_dbg(dev,
"[%d]v=%d efusev=0x%x final ABB=%d\n",
i, *volt_table, efuse_val, info->opp_sel);
/* Use recommended Vset bits from Efuse */
if (!abb->ldo_base) {
if (vset_mask)
dev_err(dev, "prop'%s':v=%d vst=%x LDO base?\n",
pname, *volt_table, vset_mask);
continue;
}
regulator: ti-abb: Fix operator precedence typo commit 40b1936e (regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver) missed a pair of brackets which cause the wrong vset data to be picked up from efuse, resulting in bad VBB voltage values. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2013-10-11 10:04:12 +00:00
info->vset = (efuse_val & vset_mask) >> __ffs(vset_mask);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
dev_dbg(dev, "[%d]v=%d vset=%x\n", i, *volt_table, info->vset);
check_abb:
switch (info->opp_sel) {
case TI_ABB_NOMINAL_OPP:
case TI_ABB_FAST_OPP:
case TI_ABB_SLOW_OPP:
/* Valid values */
break;
default:
dev_err(dev, "%s:[%d]v=%d, ABB=%d is invalid! Abort!\n",
__func__, i, *volt_table, info->opp_sel);
return -EINVAL;
}
}
/* Setup the min/max voltage constraints from the supported list */
c->min_uV = min_uV;
c->max_uV = max_uV;
return 0;
}
static struct regulator_ops ti_abb_reg_ops = {
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = ti_abb_set_voltage_sel,
.get_voltage_sel = ti_abb_get_voltage_sel,
};
/* Default ABB block offsets, IF this changes in future, create new one */
static const struct ti_abb_reg abb_regs_v1 = {
/* WARNING: registers are wrongly documented in TRM */
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
.setup_off = 0x04,
.control_off = 0x00,
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
.sr2_wtcnt_value_mask = (0xff << 8),
.fbb_sel_mask = (0x01 << 2),
.rbb_sel_mask = (0x01 << 1),
.sr2_en_mask = (0x01 << 0),
.opp_change_mask = (0x01 << 2),
.opp_sel_mask = (0x03 << 0),
};
static const struct ti_abb_reg abb_regs_v2 = {
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
.setup_off = 0x00,
.control_off = 0x04,
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
.sr2_wtcnt_value_mask = (0xff << 8),
.fbb_sel_mask = (0x01 << 2),
.rbb_sel_mask = (0x01 << 1),
.sr2_en_mask = (0x01 << 0),
.opp_change_mask = (0x01 << 2),
.opp_sel_mask = (0x03 << 0),
};
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
static const struct ti_abb_reg abb_regs_generic = {
.sr2_wtcnt_value_mask = (0xff << 8),
.fbb_sel_mask = (0x01 << 2),
.rbb_sel_mask = (0x01 << 1),
.sr2_en_mask = (0x01 << 0),
.opp_change_mask = (0x01 << 2),
.opp_sel_mask = (0x03 << 0),
};
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
static const struct of_device_id ti_abb_of_match[] = {
{.compatible = "ti,abb-v1", .data = &abb_regs_v1},
{.compatible = "ti,abb-v2", .data = &abb_regs_v2},
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
{.compatible = "ti,abb-v3", .data = &abb_regs_generic},
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
{ },
};
MODULE_DEVICE_TABLE(of, ti_abb_of_match);
/**
* ti_abb_probe() - Initialize an ABB ldo instance
* @pdev: ABB platform device
*
* Initializes an individual ABB LDO for required Body-Bias. ABB is used to
* addional bias supply to SoC modules for power savings or mandatory stability
* configuration at certain Operating Performance Points(OPPs).
*
* Return: 0 on success or appropriate error value when fails
*/
static int ti_abb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct of_device_id *match;
struct resource *res;
struct ti_abb *abb;
struct regulator_init_data *initdata = NULL;
struct regulator_dev *rdev = NULL;
struct regulator_desc *desc;
struct regulation_constraints *c;
struct regulator_config config = { };
char *pname;
int ret = 0;
match = of_match_device(ti_abb_of_match, dev);
if (!match) {
/* We do not expect this to happen */
dev_err(dev, "%s: Unable to match device\n", __func__);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -ENODEV;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
if (!match->data) {
dev_err(dev, "%s: Bad data in match\n", __func__);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -EINVAL;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
abb = devm_kzalloc(dev, sizeof(struct ti_abb), GFP_KERNEL);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
if (!abb)
return -ENOMEM;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
abb->regs = match->data;
/* Map ABB resources */
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
if (abb->regs->setup_off || abb->regs->control_off) {
pname = "base-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
abb->base = devm_ioremap_resource(dev, res);
if (IS_ERR(abb->base))
return PTR_ERR(abb->base);
abb->setup_reg = abb->base + abb->regs->setup_off;
abb->control_reg = abb->base + abb->regs->control_off;
} else {
pname = "control-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
abb->control_reg = devm_ioremap_resource(dev, res);
if (IS_ERR(abb->control_reg))
return PTR_ERR(abb->control_reg);
pname = "setup-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
abb->setup_reg = devm_ioremap_resource(dev, res);
if (IS_ERR(abb->setup_reg))
return PTR_ERR(abb->setup_reg);
}
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
pname = "int-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
if (!res) {
dev_err(dev, "Missing '%s' IO resource\n", pname);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -ENODEV;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
/*
* We may have shared interrupt register offsets which are
* write-1-to-clear between domains ensuring exclusivity.
*/
abb->int_base = devm_ioremap_nocache(dev, res->start,
resource_size(res));
if (!abb->int_base) {
dev_err(dev, "Unable to map '%s'\n", pname);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -ENOMEM;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
/* Map Optional resources */
pname = "efuse-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
if (!res) {
dev_dbg(dev, "Missing '%s' IO resource\n", pname);
ret = -ENODEV;
goto skip_opt;
}
/*
* We may have shared efuse register offsets which are read-only
* between domains
*/
abb->efuse_base = devm_ioremap_nocache(dev, res->start,
resource_size(res));
if (!abb->efuse_base) {
dev_err(dev, "Unable to map '%s'\n", pname);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -ENOMEM;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
pname = "ldo-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
regulator: ti-abb: skip optional parameter for ldo-address On platforms like OMAP4460, LDO override is never used. Even though efuse determines the ABB bias mode to operate at, ABB voltage is preconfigured in internal efuse registers without the need for LDO override for bias voltage. So skip optional parameter if property is not present. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-27 13:25:13 +00:00
if (!res) {
dev_dbg(dev, "Missing '%s' IO resource\n", pname);
ret = -ENODEV;
goto skip_opt;
}
regulator: ti-abb: Convert to use devm_ioremap_resource Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). While at it, remove the error message as devm_ioremap_resource prints a similar error message. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-18 04:15:07 +00:00
abb->ldo_base = devm_ioremap_resource(dev, res);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
if (IS_ERR(abb->ldo_base))
return PTR_ERR(abb->ldo_base);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
/* IF ldo_base is set, the following are mandatory */
pname = "ti,ldovbb-override-mask";
ret =
of_property_read_u32(pdev->dev.of_node, pname,
&abb->ldovbb_override_mask);
if (ret) {
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return ret;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
if (!abb->ldovbb_override_mask) {
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -EINVAL;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
pname = "ti,ldovbb-vset-mask";
ret =
of_property_read_u32(pdev->dev.of_node, pname,
&abb->ldovbb_vset_mask);
if (ret) {
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return ret;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
if (!abb->ldovbb_vset_mask) {
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -EINVAL;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
skip_opt:
pname = "ti,tranxdone-status-mask";
ret =
of_property_read_u32(pdev->dev.of_node, pname,
&abb->txdone_mask);
if (ret) {
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return ret;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
if (!abb->txdone_mask) {
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -EINVAL;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
initdata = of_get_regulator_init_data(dev, pdev->dev.of_node);
if (!initdata) {
dev_err(dev, "%s: Unable to alloc regulator init data\n",
__func__);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return -ENOMEM;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
/* init ABB opp_sel table */
ret = ti_abb_init_table(dev, abb, initdata);
if (ret)
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return ret;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
/* init ABB timing */
ret = ti_abb_init_timings(dev, abb);
if (ret)
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return ret;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
desc = &abb->rdesc;
desc->name = dev_name(dev);
desc->owner = THIS_MODULE;
desc->type = REGULATOR_VOLTAGE;
desc->ops = &ti_abb_reg_ops;
c = &initdata->constraints;
if (desc->n_voltages > 1)
c->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
c->always_on = true;
config.dev = dev;
config.init_data = initdata;
config.driver_data = abb;
config.of_node = pdev->dev.of_node;
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
rdev = devm_regulator_register(dev, desc, &config);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(dev, "%s: failed to register regulator(%d)\n",
__func__, ret);
regulator: ti-abb: Use devm_regulator_register devm_* simplifies the code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04 06:31:03 +00:00
return ret;
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
}
platform_set_drvdata(pdev, rdev);
/* Enable the ldo if not already done by bootloader */
regulator: ti-abb: Add support for interleaved LDO registers Certain platforms such as DRA7 have quirky memory maps such as: PRM_ABBLDO_DSPEVE_CTRL 0x4ae07e20 PRM_ABBLDO_IVA_CTRL 0x4ae07e24 other-registers PRM_ABBLDO_DSPEVE_SETUP 0x4ae07e30 PRM_ABBLDO_IVA_SETUP 0x4ae07e34 These need the address range allocation to be either not reserved OR unique allocation per register instance or use something like syscon based solution. By going with unique allocation per register, we are able to now have a single compatible driver for all instances on all platforms which use the IP block. So, introduce a new "ti,abb-v3" compatible to allow for definitions where explicit register definitions are provided, while maintaining backward compatibility of older predefined register offsets provided by "ti-abb-v1" and "ti-abb-v2". As part of this change, we rename a few variables to indicate the appropriate meaning. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-23 17:57:27 +00:00
ti_abb_rmw(abb->regs->sr2_en_mask, 1, abb->setup_reg);
regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Texas Instruments' SmartReflex 2 technology provides support for this power management technique with Forward Body Biasing (FBB) and Reverse Body Biasing (RBB). These modulate the body voltage of transistor cells or blocks dynamically to gain performance and reduce leakage. TI's SmartReflex white paper[1] has further information for usage in conjunction with other power management techniques. The application of FBB/RBB technique is determined for each unique device in some process nodes, whereas, they are mandated on other process nodes. In a nutshell, ABB technique is implemented on TI SoC as an on-chip LDO which has ABB module controlling the bias voltage. However, the voltage is unique per device. These vary per SoC family and the manner in which these techniques are used may vary depending on the Operating Performance Point (OPP) voltage targeted. For example: OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of devices. OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may optionally use FBB or optimization with RBB. OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is influenced by vset fused in s/w and requiring s/w override of default values. Further, two generations of ABB module are used in various TI SoCs. They have remained mostly register field compatible, however the register offset had switched between versions. We introduce ABB LDO support in the form of a regulator which is controlled by voltages denoting the desired Operating Performance Point which is targeted. However, since ABB transition is part of OPP change sequence, the sequencing required to ensure sane operation w.r.t OPP change is left to the controlling driver (example: cpufreq SoC driver) using standard regulator operations. The driver supports all ABB modes and ability to override ABB LDO vset control efuse based ABB mode detection etc. Current implementation is heavily influenced by the original patch series [2][3] from Mike Turquette. However, the current implementation supports only device tree based information. [1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf [2] http://marc.info/?l=linux-omap&m=134931341818379&w=2 [3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2 [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-02 17:20:10 +00:00
return 0;
}
MODULE_ALIAS("platform:ti_abb");
static struct platform_driver ti_abb_driver = {
.probe = ti_abb_probe,
.driver = {
.name = "ti_abb",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(ti_abb_of_match),
},
};
module_platform_driver(ti_abb_driver);
MODULE_DESCRIPTION("Texas Instruments ABB LDO regulator driver");
MODULE_AUTHOR("Texas Instruments Inc.");
MODULE_LICENSE("GPL v2");
Reference in New Issue Copy Permalink