FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2025-01-14 05:12:17 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
linux/drivers/usb/phy/Makefile

16 lines
483 B
Makefile
Raw Normal View History

USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 16:47:04 +02:00
#
# Makefile for physical layer USB drivers
#
ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
usb: phy: move bulk of otg/otg.c to phy/phy.c Most of otg/otg.c is not otg specific, but phy specific, so move it to the phy directory. Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-02-27 15:16:28 +01:00
obj-$(CONFIG_USB_OTG_UTILS) += phy.o
usb: phy: add a new driver for omap usb2 phy All phy related programming like enabling/disabling the clocks, powering on/off the phy is taken care of by this driver. It is also used for OTG related functionality like srp. This also includes device tree support for usb2 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-06 20:27:06 +05:30
obj-$(CONFIG_OMAP_USB2) += omap-usb2.o
usb: phy: add a new driver for usb3 phy Added a driver for usb3 phy that handles the interaction between usb phy device and dwc3 controller. This also includes device tree support for usb3 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Moiz Sonasath <m-sonasath@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 08:21:48 +05:30
obj-$(CONFIG_OMAP_USB3) += omap-usb3.o
usb: phy: add a new driver for usb part of control module Added a new driver for the usb part of control module. This has an API to power on the USB2 phy and an API to write to the mailbox depending on whether MUSB has to act in host mode or in device mode. Writing to control module registers for doing the above task which was previously done in omap glue and in omap-usb2 phy will be removed. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 15:53:57 +05:30
obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o
USB: Add driver for NXP ISP1301 USB transceiver This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29 16:47:04 +02:00
obj-$(CONFIG_USB_ISP1301) += isp1301.o
usb: phy: mv_u3d: Add usb phy driver for mv_u3d The driver supports phy_init and phy_shutdown functions to enable and disable phy for Marvell USB 3.0 controller. Signed-off-by: Yu Xu <yuxu@marvell.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-09 22:29:31 +08:00
obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
usb: move phy driver from mach-tegra to drivers/usb As part of this patch: 1. Moved existing tegra phy driver to drivers/USB directory. 2. Added standard USB phy driver APIs to tegra phy driver. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-05 18:50:23 +05:30
obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
usb: phy: add R-Car USB phy driver This patch adds Renesas R-Car USB phy driver. It supports R8A7779 chip at this point. R-Car has some USB controllers, but has only one phy-initializer. So, this driver is counting users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 19:03:11 -07:00
obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o
usb: phy: samsung: Introducing usb phy driver for hsotg This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-23 16:03:06 +05:30
obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
Reference in New Issue Copy Permalink