FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-30 13:38:40 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
1d5bc03a81
linux/arch/powerpc/kernel/pci_64.c

607 lines
16 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* Port for PPC64 David Engebretsen, IBM Corp.
* Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
*
* Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
* Rework, based on alpha PCI code.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/list.h>
Allow PCI config space syscalls to be used by 64-bit processes. The pciconfig_iobase, pciconfig_read and pciconfig_write system calls were only implemented for 32-bit processes; for 64-bit processes they returned an ENOSYS error. This allows them to be used by 64-bit processes as well. The X server uses pciconfig_iobase at least, and this change is necessary to allow a 64-bit X server to work on my G5. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09 13:02:36 +00:00
#include <linux/syscalls.h>
[PATCH] powerpc: fix trigger handling in the new irq code This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 11:44:42 +00:00
#include <linux/irq.h>
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
#include <linux/vmalloc.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
#include <asm/machdep.h>
powerpc: Move iSeries_pci.c to powerpc/platform/iseries and rename it to pci.c. This also required moving arch/ppc64/kernel/pci.h into include/asm-powerpc (called ppc-pci.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-27 16:50:25 +00:00
#include <asm/ppc-pci.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
unsigned long pci_probe_only = 1;
/* pci_io_base -- the base address from which io bars are offsets.
* This is the lowest I/O base address (so bar values are always positive),
* and it *must* be the start of ISA space if an ISA bus exists because
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
* ISA drivers use hard coded offsets. If no ISA bus exists nothing
* is mapped on the first 64K of IO space
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
unsigned long pci_io_base = ISA_IO_BASE;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
EXPORT_SYMBOL(pci_io_base);
LIST_HEAD(hose_list);
static void fixup_broken_pcnet32(struct pci_dev* dev)
{
if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
dev->vendor = PCI_VENDOR_ID_AMD;
pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
{
[POWERPC] Constify & voidify get_property() Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc core changes. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-12 05:35:54 +00:00
const u32 *prop;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
int len;
[POWERPC] Rename get_property to of_get_property: arch/powerpc Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 12:26:41 +00:00
prop = of_get_property(np, name, &len);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (prop && len >= 4)
return *prop;
return def;
}
static unsigned int pci_parse_of_flags(u32 addr0)
{
unsigned int flags = 0;
if (addr0 & 0x02000000) {
[PATCH] ppc64: Fix PCI flags when using OF device tree My code to set up the PCI tree from the Open Firmware device tree was setting IORESOURCE_* flags on the resources for the devices, but not the PCI_BASE_ADDRESS_* flags. This meant that some drivers misbehaved, and /proc/pci showed the wrong types for the resources. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21 04:14:22 +00:00
flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (addr0 & 0x40000000)
[PATCH] ppc64: Fix PCI flags when using OF device tree My code to set up the PCI tree from the Open Firmware device tree was setting IORESOURCE_* flags on the resources for the devices, but not the PCI_BASE_ADDRESS_* flags. This meant that some drivers misbehaved, and /proc/pci showed the wrong types for the resources. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21 04:14:22 +00:00
flags |= IORESOURCE_PREFETCH
| PCI_BASE_ADDRESS_MEM_PREFETCH;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
} else if (addr0 & 0x01000000)
[PATCH] ppc64: Fix PCI flags when using OF device tree My code to set up the PCI tree from the Open Firmware device tree was setting IORESOURCE_* flags on the resources for the devices, but not the PCI_BASE_ADDRESS_* flags. This meant that some drivers misbehaved, and /proc/pci showed the wrong types for the resources. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21 04:14:22 +00:00
flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
return flags;
}
static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
{
u64 base, size;
unsigned int flags;
struct resource *res;
[POWERPC] Constify & voidify get_property() Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc core changes. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-12 05:35:54 +00:00
const u32 *addrs;
u32 i;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
int proplen;
[POWERPC] Rename get_property to of_get_property: arch/powerpc Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 12:26:41 +00:00
addrs = of_get_property(node, "assigned-addresses", &proplen);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (!addrs)
return;
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
for (; proplen >= 20; proplen -= 20, addrs += 5) {
flags = pci_parse_of_flags(addrs[0]);
if (!flags)
continue;
[POWERPC] Replace use of GET_64BIT(prop, i) with of_read_number(). Remove uses of hack GET_64BIT() property macro and use the more general of_read_number() function from prom.h as suggested by Milton. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-04 19:28:44 +00:00
base = of_read_number(&addrs[1], 2);
size = of_read_number(&addrs[3], 2);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (!size)
continue;
i = addrs[0] & 0xff;
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" base: %llx, size: %llx, i: %x\n",
(unsigned long long)base,
(unsigned long long)size, i);
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
res = &dev->resource[PCI_ROM_RESOURCE];
flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
} else {
printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
continue;
}
res->start = base;
res->end = base + size - 1;
res->flags = flags;
res->name = pci_name(dev);
}
}
[PATCH] dlpar enable for OF pci probe This patch contains the arch/ppc64 bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe mechanism. This code path is currently broken. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04 21:30:56 +00:00
struct pci_dev *of_create_pci_dev(struct device_node *node,
struct pci_bus *bus, int devfn)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
{
struct pci_dev *dev;
const char *type;
PCI: Convert to alloc_pci_dev() Convert code that allocs a struct pci_dev to use alloc_pci_dev(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-05 07:19:09 +00:00
dev = alloc_pci_dev();
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (!dev)
return NULL;
[POWERPC] Rename get_property to of_get_property: arch/powerpc Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 12:26:41 +00:00
type = of_get_property(node, "device_type", NULL);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (type == NULL)
type = "";
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" create device, devfn: %x, type: %s\n", devfn, type);
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
dev->bus = bus;
dev->sysdata = node;
dev->dev.parent = bus->bridge;
dev->dev.bus = &pci_bus_type;
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
dev->device = get_int_prop(node, "device-id", 0xffff);
dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
[PATCH] powerpc: Extended PCI config space This adds back the call to pci_cfg_space_size() when building the PCI tree from OF nodes that was commented out due to the function not being exported by the PCI code. It's now exported, so let's use it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10 03:50:37 +00:00
dev->cfg_size = pci_cfg_space_size(dev);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
[POWERPC] Use dev_set_name in pci_64.c During the next merge window, pci_name()'s return value will become const, so use the new dev_set_name() instead to avoid the warning (from linux-next): arch/powerpc/kernel/pci_64.c: In function 'of_create_pci_dev': arch/powerpc/kernel/pci_64.c:193: warning: passing argument 1 of 'sprintf' discards qualifiers from pointer target type Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-03 03:36:11 +00:00
dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
PCI: read revision ID by default Currently there are 97 occurrences where drivers need the pci revision ID. We can do this once for all devices. Even the pci subsystem needs the revision several times for quirks. The extra u8 member pads out nicely in the pci_dev struct. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08 22:46:30 +00:00
dev->revision = get_int_prop(node, "revision-id", 0);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" class: 0x%x\n", dev->class);
pr_debug(" revision: 0x%x\n", dev->revision);
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
dev->current_state = 4; /* unknown power state */
[POWERPC] Fix PCI device channel state initialization Initialize the pci device pci channel state. This is critical for having the pci_channel_offline() routine (in pci.h) to function correctly. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-19 20:00:34 +00:00
dev->error_state = pci_channel_io_normal;
[POWERPC] Fix initialization and usage of dma_mask powerpc has a couple of bugs in the usage of dma_masks that tend to break when drivers explicitly try to set a 32-bit mask for example. First, the code that generates the pci devices from the OF device-tree doesn't initialize the mask properly, then our implementation of set_dma_mask() was trying to validate the -previous- mask value, not the one passed in as an argument. This fixes these problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-06 22:05:10 +00:00
dev->dma_mask = 0xffffffff;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
[POWERPC] Add support for PCI-Express nodes in the device tree This adds support to recognize the PCIe device_type "pciex" and made the portdrv buildable. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-07 21:05:46 +00:00
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
} else if (!strcmp(type, "cardbus")) {
dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
} else {
dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
dev->rom_base_reg = PCI_ROM_ADDRESS;
[POWERPC] Add new interrupt mapping core and change platforms to use it This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 11:36:01 +00:00
/* Maybe do a default OF mapping here */
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
dev->irq = NO_IRQ;
}
pci_parse_of_addrs(node, dev);
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" adding to system ...\n");
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
pci_device_add(dev, bus);
return dev;
}
[PATCH] dlpar enable for OF pci probe This patch contains the arch/ppc64 bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe mechanism. This code path is currently broken. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04 21:30:56 +00:00
EXPORT_SYMBOL(of_create_pci_dev);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
powerpc/pci: Split pcibios_fixup_bus() into bus setup and device setup Currently, our PCI code uses the pcibios_fixup_bus() callback, which is called by the generic code when probing PCI buses, for two different things. One is to set up things related to the bus itself, such as reading bridge resources for P2P bridges, fixing them up, or setting up the iommu's associated with bridges on some platforms. The other is some setup for each individual device under that bridge, mostly setting up DMA mappings and interrupts. The problem is that this approach doesn't work well with PCI hotplug when an existing bus is re-probed for new children. We fix this problem by splitting pcibios_fixup_bus into two routines: pcibios_setup_bus_self() is now called to setup the bus itself pcibios_setup_bus_devices() is now called to setup devices pcibios_fixup_bus() is then modified to call these two after reading the bridge bases, and the OF based PCI probe is modified to avoid calling into the first one when rescanning an existing bridge. [paulus@samba.org - fixed eeh.h for 32-bit compile now that pci-common.c is including it unconditionally.] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:37 +00:00
static void __devinit __of_scan_bus(struct device_node *node,
struct pci_bus *bus, int rescan_existing)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
{
[POWERPC] arch/powerpc/kernel: Use for_each_child_of_node Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-03 04:13:37 +00:00
struct device_node *child;
[POWERPC] Constify & voidify get_property() Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc core changes. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-12 05:35:54 +00:00
const u32 *reg;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
int reglen, devfn;
struct pci_dev *dev;
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug("of_scan_bus(%s) bus no %d... \n",
node->full_name, bus->number);
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
[POWERPC] Merge PCI resource fixups The PCI code in 32 and 64 bits fixes up resources differently. 32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus() while 64 bits does things in various places depending on whether you are using OF probing, using PCI hotplug, etc... This merges those by basically using the 32 bits approach for both, with various tweaks to make 64 bits work with the new approach. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:51 +00:00
/* Scan direct children */
[POWERPC] arch/powerpc/kernel: Use for_each_child_of_node Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-03 04:13:37 +00:00
for_each_child_of_node(node, child) {
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" * %s\n", child->full_name);
[POWERPC] Rename get_property to of_get_property: arch/powerpc Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 12:26:41 +00:00
reg = of_get_property(child, "reg", &reglen);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (reg == NULL || reglen < 20)
continue;
devfn = (reg[0] >> 8) & 0xff;
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
/* create a new pci_dev for this device */
dev = of_create_pci_dev(child, bus, devfn);
if (!dev)
continue;
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" dev header type: %x\n", dev->hdr_type);
[POWERPC] Merge PCI resource fixups The PCI code in 32 and 64 bits fixes up resources differently. 32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus() while 64 bits does things in various places depending on whether you are using OF probing, using PCI hotplug, etc... This merges those by basically using the 32 bits approach for both, with various tweaks to make 64 bits work with the new approach. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:51 +00:00
}
powerpc/pci: Split pcibios_fixup_bus() into bus setup and device setup Currently, our PCI code uses the pcibios_fixup_bus() callback, which is called by the generic code when probing PCI buses, for two different things. One is to set up things related to the bus itself, such as reading bridge resources for P2P bridges, fixing them up, or setting up the iommu's associated with bridges on some platforms. The other is some setup for each individual device under that bridge, mostly setting up DMA mappings and interrupts. The problem is that this approach doesn't work well with PCI hotplug when an existing bus is re-probed for new children. We fix this problem by splitting pcibios_fixup_bus into two routines: pcibios_setup_bus_self() is now called to setup the bus itself pcibios_setup_bus_devices() is now called to setup devices pcibios_fixup_bus() is then modified to call these two after reading the bridge bases, and the OF based PCI probe is modified to avoid calling into the first one when rescanning an existing bridge. [paulus@samba.org - fixed eeh.h for 32-bit compile now that pci-common.c is including it unconditionally.] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:37 +00:00
/* Apply all fixups necessary. We don't fixup the bus "self"
* for an existing bridge that is being rescanned
*/
if (!rescan_existing)
pcibios_setup_bus_self(bus);
pcibios_setup_bus_devices(bus);
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
[POWERPC] Merge PCI resource fixups The PCI code in 32 and 64 bits fixes up resources differently. 32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus() while 64 bits does things in various places depending on whether you are using OF probing, using PCI hotplug, etc... This merges those by basically using the 32 bits approach for both, with various tweaks to make 64 bits work with the new approach. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:51 +00:00
/* Now scan child busses */
list_for_each_entry(dev, &bus->devices, bus_list) {
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
[POWERPC] Merge PCI resource fixups The PCI code in 32 and 64 bits fixes up resources differently. 32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus() while 64 bits does things in various places depending on whether you are using OF probing, using PCI hotplug, etc... This merges those by basically using the 32 bits approach for both, with various tweaks to make 64 bits work with the new approach. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:51 +00:00
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
struct device_node *child = pci_device_to_OF_node(dev);
if (dev)
of_scan_pci_bridge(child, dev);
}
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
}
}
powerpc/pci: Split pcibios_fixup_bus() into bus setup and device setup Currently, our PCI code uses the pcibios_fixup_bus() callback, which is called by the generic code when probing PCI buses, for two different things. One is to set up things related to the bus itself, such as reading bridge resources for P2P bridges, fixing them up, or setting up the iommu's associated with bridges on some platforms. The other is some setup for each individual device under that bridge, mostly setting up DMA mappings and interrupts. The problem is that this approach doesn't work well with PCI hotplug when an existing bus is re-probed for new children. We fix this problem by splitting pcibios_fixup_bus into two routines: pcibios_setup_bus_self() is now called to setup the bus itself pcibios_setup_bus_devices() is now called to setup devices pcibios_fixup_bus() is then modified to call these two after reading the bridge bases, and the OF based PCI probe is modified to avoid calling into the first one when rescanning an existing bridge. [paulus@samba.org - fixed eeh.h for 32-bit compile now that pci-common.c is including it unconditionally.] Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:37 +00:00
void __devinit of_scan_bus(struct device_node *node,
struct pci_bus *bus)
{
__of_scan_bus(node, bus, 0);
}
EXPORT_SYMBOL_GPL(of_scan_bus);
void __devinit of_rescan_bus(struct device_node *node,
struct pci_bus *bus)
{
__of_scan_bus(node, bus, 1);
}
EXPORT_SYMBOL_GPL(of_rescan_bus);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
[PATCH] dlpar enable for OF pci probe This patch contains the arch/ppc64 bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe mechanism. This code path is currently broken. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04 21:30:56 +00:00
void __devinit of_scan_pci_bridge(struct device_node *node,
[POWERPC] Merge PCI resource fixups The PCI code in 32 and 64 bits fixes up resources differently. 32 bits uses a header quirk plus handles bridges in pcibios_fixup_bus() while 64 bits does things in various places depending on whether you are using OF probing, using PCI hotplug, etc... This merges those by basically using the 32 bits approach for both, with various tweaks to make 64 bits work with the new approach. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:51 +00:00
struct pci_dev *dev)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
{
struct pci_bus *bus;
[POWERPC] Constify & voidify get_property() Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc core changes. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-12 05:35:54 +00:00
const u32 *busrange, *ranges;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
int len, i, mode;
struct resource *res;
unsigned int flags;
u64 size;
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
/* parse bus-range property */
[POWERPC] Rename get_property to of_get_property: arch/powerpc Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 12:26:41 +00:00
busrange = of_get_property(node, "bus-range", &len);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (busrange == NULL || len != 8) {
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
node->full_name);
return;
}
[POWERPC] Rename get_property to of_get_property: arch/powerpc Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-03 12:26:41 +00:00
ranges = of_get_property(node, "ranges", &len);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (ranges == NULL) {
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
node->full_name);
return;
}
bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
if (!bus) {
printk(KERN_ERR "Failed to create pci bus for %s\n",
node->full_name);
return;
}
bus->primary = dev->bus->number;
bus->subordinate = busrange[1];
bus->bridge_ctl = 0;
bus->sysdata = node;
/* parse ranges property */
/* PCI #address-cells == 3 and #size-cells == 2 always */
res = &dev->resource[PCI_BRIDGE_RESOURCES];
for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
res->flags = 0;
bus->resource[i] = res;
++res;
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
flags = pci_parse_of_flags(ranges[0]);
[POWERPC] Replace use of GET_64BIT(prop, i) with of_read_number(). Remove uses of hack GET_64BIT() property macro and use the more general of_read_number() function from prom.h as suggested by Milton. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-04 19:28:44 +00:00
size = of_read_number(&ranges[6], 2);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (flags == 0 || size == 0)
continue;
if (flags & IORESOURCE_IO) {
res = bus->resource[0];
if (res->flags) {
printk(KERN_ERR "PCI: ignoring extra I/O range"
" for bridge %s\n", node->full_name);
continue;
}
} else {
if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
printk(KERN_ERR "PCI: too many memory ranges"
" for bridge %s\n", node->full_name);
continue;
}
res = bus->resource[i];
++i;
}
[POWERPC] Replace use of GET_64BIT(prop, i) with of_read_number(). Remove uses of hack GET_64BIT() property macro and use the more general of_read_number() function from prom.h as suggested by Milton. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-04 19:28:44 +00:00
res->start = of_read_number(&ranges[1], 2);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
res->end = res->start + size - 1;
res->flags = flags;
}
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" bus name: %s\n", bus->name);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" probe mode: %d\n", mode);
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
else if (mode == PCI_PROBE_NORMAL)
pci_scan_child_bus(bus);
}
[PATCH] dlpar enable for OF pci probe This patch contains the arch/ppc64 bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe mechanism. This code path is currently broken. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04 21:30:56 +00:00
EXPORT_SYMBOL(of_scan_pci_bridge);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
[PATCH] dlpar enable for OF pci probe This patch contains the arch/ppc64 bits for enabling DLPAR and PCI Hotplug for the new OF-based PCI probe mechanism. This code path is currently broken. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04 21:30:56 +00:00
void __devinit scan_phb(struct pci_controller *hose)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
{
struct pci_bus *bus;
[POWERPC] pci_controller->arch_data really is a struct device_node * Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-10 03:33:21 +00:00
struct device_node *node = hose->dn;
powerpc/pci: Use common PHB resource hookup The 32-bit and 64-bit powerpc PCI code used to set up the resource pointers of the root bus of a given PHB in completely different places. This unifies this in large part, by making 32-bit use a routine very similar to what 64-bit does when initially scanning the PCI busses. The actual setup of the PHB resources itself is then moved to a common function in pci-common.c. This should cause no functional change on 64-bit. On 32-bit, the effect is that the PHB resources are going to be setup a bit earlier, instead of being setup from pcibios_fixup_bus(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:29 +00:00
int mode;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug("PCI: Scanning PHB %s\n",
node ? node->full_name : "<NO NAME>");
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
[POWERPC] Merge PCI resource allocation & assignment The 32 bits PCI code now uses the generic code for assigning unassigned resources and an algorithm similar to x86 for claiming existing ones. This works far better than the 64 bits code which basically can only claim existing ones (pci_probe_only=1) or would fall apart completely. This merges them so that the new 32 bits implementation is used for both. 64 bits now gets the new PCI flags for controlling the behaviour, though the old pci_probe_only global is still there for now to be cleared if you want to. I kept a pcibios_claim_one_bus() function mostly based on the old 64 bits code for use by the DLPAR hotplug. This will have to be cleaned up, thought I hope it will work in the meantime. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:53 +00:00
/* Create an empty bus for the toplevel */
[POWERPC] Add "parent" struct device for PCI host bridges Add a "parent" struct device to our PCI host bridge data structure so that PCI can be rooted off another device in sysfs. Note that arch/ppc doesn't use it, only arch/powerpc, though it's available for both 32 and 64 bits. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-11 06:25:07 +00:00
bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (bus == NULL) {
printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
hose->global_number);
return;
}
bus->secondary = hose->first_busno;
hose->bus = bus;
[POWERPC] Merge PCI resource allocation & assignment The 32 bits PCI code now uses the generic code for assigning unassigned resources and an algorithm similar to x86 for claiming existing ones. This works far better than the 64 bits code which basically can only claim existing ones (pci_probe_only=1) or would fall apart completely. This merges them so that the new 32 bits implementation is used for both. 64 bits now gets the new PCI flags for controlling the behaviour, though the old pci_probe_only global is still there for now to be cleared if you want to. I kept a pcibios_claim_one_bus() function mostly based on the old 64 bits code for use by the DLPAR hotplug. This will have to be cleaned up, thought I hope it will work in the meantime. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:53 +00:00
/* Get some IO space for the new PHB */
[POWERPC] Remove some iSeries platform checks from the PCI code Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 15:03:23 +00:00
pcibios_map_io_space(bus);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
[POWERPC] Merge PCI resource allocation & assignment The 32 bits PCI code now uses the generic code for assigning unassigned resources and an algorithm similar to x86 for claiming existing ones. This works far better than the 64 bits code which basically can only claim existing ones (pci_probe_only=1) or would fall apart completely. This merges them so that the new 32 bits implementation is used for both. 64 bits now gets the new PCI flags for controlling the behaviour, though the old pci_probe_only global is still there for now to be cleared if you want to. I kept a pcibios_claim_one_bus() function mostly based on the old 64 bits code for use by the DLPAR hotplug. This will have to be cleaned up, thought I hope it will work in the meantime. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:53 +00:00
/* Wire up PHB bus resources */
powerpc/pci: Use common PHB resource hookup The 32-bit and 64-bit powerpc PCI code used to set up the resource pointers of the root bus of a given PHB in completely different places. This unifies this in large part, by making 32-bit use a routine very similar to what 64-bit does when initially scanning the PCI busses. The actual setup of the PHB resources itself is then moved to a common function in pci-common.c. This should cause no functional change on 64-bit. On 32-bit, the effect is that the PHB resources are going to be setup a bit earlier, instead of being setup from pcibios_fixup_bus(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:29 +00:00
pcibios_setup_phb_resources(hose);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
[POWERPC] Merge PCI resource allocation & assignment The 32 bits PCI code now uses the generic code for assigning unassigned resources and an algorithm similar to x86 for claiming existing ones. This works far better than the 64 bits code which basically can only claim existing ones (pci_probe_only=1) or would fall apart completely. This merges them so that the new 32 bits implementation is used for both. 64 bits now gets the new PCI flags for controlling the behaviour, though the old pci_probe_only global is still there for now to be cleared if you want to. I kept a pcibios_claim_one_bus() function mostly based on the old 64 bits code for use by the DLPAR hotplug. This will have to be cleaned up, thought I hope it will work in the meantime. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:53 +00:00
/* Get probe mode and perform scan */
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
mode = PCI_PROBE_NORMAL;
[PATCH] powerpc: Experimental support for new G5 Macs (#2) This adds some very basic support for the new machines, including the Quad G5 (tested), and other new dual core based machines and iMac G5 iSight (untested). This is still experimental ! There is no thermal control yet, there is no proper handing of MSIs, etc.. but it boots, I have all 4 cores up on my machine. Compared to the previous version of this patch, this one adds DART IOMMU support for the U4 chipset and thus should work fine on setups with more than 2Gb of RAM. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-14 02:10:10 +00:00
if (node && ppc_md.pci_probe_mode)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
mode = ppc_md.pci_probe_mode(bus);
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" probe mode: %d\n", mode);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (mode == PCI_PROBE_DEVTREE) {
bus->subordinate = hose->last_busno;
of_scan_bus(node, bus);
}
[PATCH] Remove occurences of PPC_MULTIPLATFORM in pci_64.c Since iSeries is merged to MULTIPLATFORM, there is no way to build a 64bit kernel without MULTIPLATFORM, so PPC_MULTIPLATFORM can be removed in 64bit-only files. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-02 12:56:06 +00:00
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
if (mode == PCI_PROBE_NORMAL)
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
[POWERPC] Merge PCI resource allocation & assignment The 32 bits PCI code now uses the generic code for assigning unassigned resources and an algorithm similar to x86 for claiming existing ones. This works far better than the 64 bits code which basically can only claim existing ones (pci_probe_only=1) or would fall apart completely. This merges them so that the new 32 bits implementation is used for both. 64 bits now gets the new PCI flags for controlling the behaviour, though the old pci_probe_only global is still there for now to be cleared if you want to. I kept a pcibios_claim_one_bus() function mostly based on the old 64 bits code for use by the DLPAR hotplug. This will have to be cleaned up, thought I hope it will work in the meantime. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:53 +00:00
printk(KERN_INFO "PCI: Probing PCI hardware\n");
powerpc/pci: Use common PHB resource hookup The 32-bit and 64-bit powerpc PCI code used to set up the resource pointers of the root bus of a given PHB in completely different places. This unifies this in large part, by making 32-bit use a routine very similar to what 64-bit does when initially scanning the PCI busses. The actual setup of the PHB resources itself is then moved to a common function in pci-common.c. This should cause no functional change on 64-bit. On 32-bit, the effect is that the PHB resources are going to be setup a bit earlier, instead of being setup from pcibios_fixup_bus(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:29 +00:00
/* For now, override phys_mem_access_prot. If we need it,g
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* later, we may move that initialization to each ppc_md
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
[POWERPC] Merge PCI resource allocation & assignment The 32 bits PCI code now uses the generic code for assigning unassigned resources and an algorithm similar to x86 for claiming existing ones. This works far better than the 64 bits code which basically can only claim existing ones (pci_probe_only=1) or would fall apart completely. This merges them so that the new 32 bits implementation is used for both. 64 bits now gets the new PCI flags for controlling the behaviour, though the old pci_probe_only global is still there for now to be cleared if you want to. I kept a pcibios_claim_one_bus() function mostly based on the old 64 bits code for use by the DLPAR hotplug. This will have to be cleaned up, thought I hope it will work in the meantime. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:53 +00:00
if (pci_probe_only)
ppc_pci_flags |= PPC_PCI_PROBE_ONLY;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
powerpc: Fix domain numbers in /proc on 64-bit The code to properly expose domain numbers in /proc is somewhat bogus on ppc64 as it depends on the "buid" field being non-0, but that field is really pseries specific. This removes that code and makes ppc64 use the same code as 32-bit which effectively decides whether to expose domains based on ppc_pci_flags set by the platform, and sets the default for 64-bit to enable domains and enable compatibility for domain 0 (which strips the domain number for domain 0 to help with X servers). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-02 14:12:51 +00:00
/* On ppc64, we always enable PCI domains and we keep domain 0
* backward compatible in /proc for video cards
*/
ppc_pci_flags |= PPC_PCI_ENABLE_PROC_DOMAINS | PPC_PCI_COMPAT_DOMAIN_0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Scan all of the recorded PCI controllers. */
[PATCH] powerpc: properly configure DDR/P5IOC children devs The dynamic add path for PCI Host Bridges can fail to configure children adapters under P5IOC controllers. It fails to properly fixup bus/device resources, and it fails to properly enable EEH. Both of these steps need to occur before any children devices are enabled in pci_bus_add_devices(). Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-14 23:46:45 +00:00
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 07:17:36 +00:00
scan_phb(hose);
[PATCH] powerpc: properly configure DDR/P5IOC children devs The dynamic add path for PCI Host Bridges can fail to configure children adapters under P5IOC controllers. It fails to properly fixup bus/device resources, and it fails to properly enable EEH. Both of these steps need to occur before any children devices are enabled in pci_bus_add_devices(). Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-14 23:46:45 +00:00
pci_bus_add_devices(hose->bus);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Merge PCI resource allocation & assignment The 32 bits PCI code now uses the generic code for assigning unassigned resources and an algorithm similar to x86 for claiming existing ones. This works far better than the 64 bits code which basically can only claim existing ones (pci_probe_only=1) or would fall apart completely. This merges them so that the new 32 bits implementation is used for both. 64 bits now gets the new PCI flags for controlling the behaviour, though the old pci_probe_only global is still there for now to be cleared if you want to. I kept a pcibios_claim_one_bus() function mostly based on the old 64 bits code for use by the DLPAR hotplug. This will have to be cleaned up, thought I hope it will work in the meantime. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 03:54:53 +00:00
/* Call common code to handle resource allocation */
pcibios_resource_survey();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] powerpc: Quiet PCI init printouts Quiet some of the more debug related output from the pci probe routines. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-12 20:26:59 +00:00
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
}
subsys_initcall(pcibios_init);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
#ifdef CONFIG_HOTPLUG
int pcibios_unmap_io_space(struct pci_bus *bus)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
struct pci_controller *hose;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
WARN_ON(bus == NULL);
[POWERPC] Fix IO space on PCI buses created from of_platform This changes the way of_platform_pci creates PCI host bridges such that it uses request_phb_iospace() for mapping the IO ports, instead of using the dynamic hotplug stuff. That guarantees the IO space stays within the 2GB limit and thus doesn't break half of the legacy drivers around. Fixes a couple of warnings due to missing IO space while at it. This patch is a temporary workaround for 2.6.22 before a more complete rewrite of IO mappings is merged in 2.6.23 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-15 06:19:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* If this is not a PHB, we only flush the hash table over
* the area mapped by this bridge. We don't play with the PTE
* mappings since we might have to deal with sub-page alignemnts
* so flushing the hash table is the only sane way to make sure
* that no hash entries are covering that removed bridge area
* while still allowing other busses overlapping those pages
*/
if (bus->self) {
struct resource *res = bus->resource[0];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug("IO unmapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
[POWERPC] Fix IO space on PCI buses created from of_platform This changes the way of_platform_pci creates PCI host bridges such that it uses request_phb_iospace() for mapping the IO ports, instead of using the dynamic hotplug stuff. That guarantees the IO space stays within the 2GB limit and thus doesn't break half of the legacy drivers around. Fixes a couple of warnings due to missing IO space while at it. This patch is a temporary workaround for 2.6.22 before a more complete rewrite of IO mappings is merged in 2.6.23 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-15 06:19:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
powerpc/pci: Fix unmapping of IO space on 64-bit A typo/thinko made us pass the wrong argument to __flush_hash_table_range when unplugging bridges, thus not flushing all the translations for the IO space on unplug. The third parameter to __flush_hash_table_range is `end', not `size'. This causes the hypervisor to refuse unplugging slots. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:47 +00:00
res->end + _IO_BASE + 1);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* Get the host bridge */
hose = pci_bus_to_host(bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* Check if we have IOs allocated */
if (hose->io_base_alloc == 0)
return 0;
[POWERPC] Fix IO space on PCI buses created from of_platform This changes the way of_platform_pci creates PCI host bridges such that it uses request_phb_iospace() for mapping the IO ports, instead of using the dynamic hotplug stuff. That guarantees the IO space stays within the 2GB limit and thus doesn't break half of the legacy drivers around. Fixes a couple of warnings due to missing IO space while at it. This patch is a temporary workaround for 2.6.22 before a more complete rewrite of IO mappings is merged in 2.6.23 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-15 06:19:36 +00:00
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug("IO unmapping for PHB %s\n", hose->dn->full_name);
pr_debug(" alloc=0x%p\n", hose->io_base_alloc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* This is a PHB, we fully unmap the IO area */
vunmap(hose->io_base_alloc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
EXPORT_SYMBOL_GPL(pcibios_unmap_io_space);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
#endif /* CONFIG_HOTPLUG */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
int __devinit pcibios_map_io_space(struct pci_bus *bus)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
struct vm_struct *area;
unsigned long phys_page;
unsigned long size_page;
unsigned long io_virt_offset;
struct pci_controller *hose;
[POWERPC] Fix IO space on PCI buses created from of_platform This changes the way of_platform_pci creates PCI host bridges such that it uses request_phb_iospace() for mapping the IO ports, instead of using the dynamic hotplug stuff. That guarantees the IO space stays within the 2GB limit and thus doesn't break half of the legacy drivers around. Fixes a couple of warnings due to missing IO space while at it. This patch is a temporary workaround for 2.6.22 before a more complete rewrite of IO mappings is merged in 2.6.23 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-15 06:19:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
WARN_ON(bus == NULL);
[POWERPC] Fix incorrect calculation of I/O window addresses My patch "Cope with PCI host bridge I/O window not starting at 0" introduced a bug in the calculation of the virtual addresses for the I/O windows of PCI host bridges other than the first, because it didn't account for the fact that hose->io_resource gets offset so that it reflects the range of global I/O port numbers assigned to the bridge. This fixes it and simplifies get_bus_io_range() in the process. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-09 11:47:15 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* If this not a PHB, nothing to do, page tables still exist and
* thus HPTEs will be faulted in when needed
*/
if (bus->self) {
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug("IO mapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
pr_debug(" virt=0x%016lx...0x%016lx\n",
bus->resource[0]->start + _IO_BASE,
bus->resource[0]->end + _IO_BASE);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* Get the host bridge */
hose = pci_bus_to_host(bus);
phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE);
size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* Make sure IO area address is clear */
hose->io_base_alloc = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* If there's no IO to map on that bus, get away too */
if (hose->pci_io_size == 0 || hose->io_base_phys == 0)
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* Let's allocate some IO space for that guy. We don't pass
* VM_IOREMAP because we don't care about alignment tricks that
* the core does in that case. Maybe we should due to stupid card
* with incomplete address decoding but I'd rather not deal with
* those outside of the reserved 64K legacy region.
*/
area = __get_vm_area(size_page, 0, PHB_IO_BASE, PHB_IO_END);
if (area == NULL)
return -ENOMEM;
hose->io_base_alloc = area->addr;
hose->io_base_virt = (void __iomem *)(area->addr +
hose->io_base_phys - phys_page);
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
pr_debug(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
pr_debug(" size=0x%016lx (alloc=0x%016lx)\n",
hose->pci_io_size, size_page);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
/* Establish the mapping */
if (__ioremap_at(phys_page, area->addr, size_page,
_PAGE_NO_CACHE | _PAGE_GUARDED) == NULL)
return -ENOMEM;
/* Fixup hose IO resource */
io_virt_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
hose->io_resource.start += io_virt_offset;
hose->io_resource.end += io_virt_offset;
powerpc/pci: Cleanup debug printk's This removes the various DBG() macro from the powerpc PCI code and makes it use the standard pr_debug instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 19:48:22 +00:00
pr_debug(" hose->io_resource=0x%016lx...0x%016lx\n",
hose->io_resource.start, hose->io_resource.end);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return 0;
}
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] powerpc: pci_address_to_pio fix This fixes pci_address_to_pio() to return an unsigned long (to be safe) and fixes a bug in the implementation that caused it to return a bogus IO port number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-15 04:00:57 +00:00
unsigned long pci_address_to_pio(phys_addr_t address)
[PATCH] powerpc: fix for "Update OF address parsers" This allows iSeries to build again. It just moves pci_address_to_pio outside the #ifdef CONFIG_PPC_MULTIPLATFORM. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-07 02:01:05 +00:00
{
struct pci_controller *hose, *tmp;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
if (address >= hose->io_base_phys &&
[PATCH] powerpc: pci_address_to_pio fix This fixes pci_address_to_pio() to return an unsigned long (to be safe) and fixes a bug in the implementation that caused it to return a bogus IO port number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-15 04:00:57 +00:00
address < (hose->io_base_phys + hose->pci_io_size)) {
unsigned long base =
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 05:15:36 +00:00
(unsigned long)hose->io_base_virt - _IO_BASE;
[PATCH] powerpc: pci_address_to_pio fix This fixes pci_address_to_pio() to return an unsigned long (to be safe) and fixes a bug in the implementation that caused it to return a bogus IO port number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-15 04:00:57 +00:00
return base + (address - hose->io_base_phys);
}
[PATCH] powerpc: fix for "Update OF address parsers" This allows iSeries to build again. It just moves pci_address_to_pio outside the #ifdef CONFIG_PPC_MULTIPLATFORM. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-07 02:01:05 +00:00
}
return (unsigned int)-1;
}
EXPORT_SYMBOL_GPL(pci_address_to_pio);
Allow PCI config space syscalls to be used by 64-bit processes. The pciconfig_iobase, pciconfig_read and pciconfig_write system calls were only implemented for 32-bit processes; for 64-bit processes they returned an ENOSYS error. This allows them to be used by 64-bit processes as well. The X server uses pciconfig_iobase at least, and this change is necessary to allow a 64-bit X server to work on my G5. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09 13:02:36 +00:00
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
long sys_pciconfig_iobase(long which, unsigned long in_bus,
unsigned long in_devfn)
{
struct pci_controller* hose;
struct list_head *ln;
struct pci_bus *bus = NULL;
struct device_node *hose_node;
/* Argh ! Please forgive me for that hack, but that's the
* simplest way to get existing XFree to not lockup on some
* G5 machines... So when something asks for bus 0 io base
* (bus 0 is HT root), we return the AGP one instead.
*/
[PATCH] powerpc: merge code values for identifying platforms This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 02:37:51 +00:00
if (machine_is_compatible("MacRISC4"))
Allow PCI config space syscalls to be used by 64-bit processes. The pciconfig_iobase, pciconfig_read and pciconfig_write system calls were only implemented for 32-bit processes; for 64-bit processes they returned an ENOSYS error. This allows them to be used by 64-bit processes as well. The X server uses pciconfig_iobase at least, and this change is necessary to allow a 64-bit X server to work on my G5. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09 13:02:36 +00:00
if (in_bus == 0)
in_bus = 0xf0;
/* That syscall isn't quite compatible with PCI domains, but it's
* used on pre-domains setup. We return the first match
*/
for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
bus = pci_bus_b(ln);
[POWERPC] Fix sys_pciconfig_iobase bus matching A stupid bug has been plaguing the sys_pciconfig_iobase on ppc64. It wasn't noticed until recently as it seems to not affect G5s but it's been causing problems running X servers on some other machines recently. The bus number matching was bogus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-27 20:45:53 +00:00
if (in_bus >= bus->number && in_bus <= bus->subordinate)
Allow PCI config space syscalls to be used by 64-bit processes. The pciconfig_iobase, pciconfig_read and pciconfig_write system calls were only implemented for 32-bit processes; for 64-bit processes they returned an ENOSYS error. This allows them to be used by 64-bit processes as well. The X server uses pciconfig_iobase at least, and this change is necessary to allow a 64-bit X server to work on my G5. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-09 13:02:36 +00:00
break;
bus = NULL;
}
if (bus == NULL || bus->sysdata == NULL)
return -ENODEV;
hose_node = (struct device_node *)bus->sysdata;
hose = PCI_DN(hose_node)->phb;
switch (which) {
case IOBASE_BRIDGE_NUMBER:
return (long)hose->first_busno;
case IOBASE_MEMORY:
return (long)hose->pci_mem_offset;
case IOBASE_IO:
return (long)hose->io_base_phys;
case IOBASE_ISA_IO:
return (long)isa_io_base;
case IOBASE_ISA_MEM:
return -EINVAL;
}
return -EOPNOTSUPP;
}
[POWERPC] pcibus_to_node fixes of_node_to_nid returns -1 if the associativity cannot be found. This means pcibus_to_cpumask has to be careful not to pass a negative index into node_to_cpumask. Since pcibus_to_node could be used a lot, and of_node_to_nid is slow (it walks a list doing strcmps), lets also cache the node in the pci_controller struct. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 10:53:06 +00:00
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
struct pci_controller *phb = pci_bus_to_host(bus);
return phb->node;
}
EXPORT_SYMBOL(pcibus_to_node);
#endif
Reference in New Issue Copy Permalink