mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-23 01:40:30 +00:00
76 lines
2.8 KiB
Plaintext
76 lines
2.8 KiB
Plaintext
|
This is an explanation of what i2c is, and what is supported in this package.
|
||
|
|
|
||
|
|
I2C and SMBus
|
||
|
|
=============
|
||
|
|
|
||
|
|
I2C (pronounce: I squared C) is a protocol developed by Philips. It is a
|
||
|
|
slow two-wire protocol (10-400 kHz), but it suffices for many types of
|
||
|
|
devices.
|
||
|
|
|
||
|
|
SMBus (System Management Bus) is a subset of the I2C protocol. Many
|
||
|
|
modern mainboards have a System Management Bus. There are a lot of
|
||
|
|
devices which can be connected to a SMBus; the most notable are modern
|
||
|
|
memory chips with EEPROM memories and chips for hardware monitoring.
|
||
|
|
|
||
|
|
Because the SMBus is just a special case of the generalized I2C bus, we
|
||
|
|
can simulate the SMBus protocol on plain I2C busses. The reverse is
|
||
|
|
regretfully impossible.
|
||
|
|
|
||
|
|
|
||
|
|
Terminology
|
||
|
|
===========
|
||
|
|
|
||
|
|
When we talk about I2C, we use the following terms:
|
||
|
|
Bus -> Algorithm
|
||
|
|
Adapter
|
||
|
|
Device -> Driver
|
||
|
|
Client
|
||
|
|
|
||
|
|
An Algorithm driver contains general code that can be used for a whole class
|
||
|
|
of I2C adapters. Each specific adapter driver depends on one algorithm
|
||
|
|
driver.
|
||
|
|
A Driver driver (yes, this sounds ridiculous, sorry) contains the general
|
||
|
|
code to access some type of device. Each detected device gets its own
|
||
|
|
data in the Client structure. Usually, Driver and Client are more closely
|
||
|
|
integrated than Algorithm and Adapter.
|
||
|
|
|
||
|
|
For a given configuration, you will need a driver for your I2C bus (usually
|
||
|
|
a separate Adapter and Algorithm driver), and drivers for your I2C devices
|
||
|
|
(usually one driver for each device). There are no I2C device drivers
|
||
|
|
in this package. See the lm_sensors project http://www.lm-sensors.nu
|
||
|
|
for device drivers.
|
||
|
|
|
||
|
|
|
||
|
|
Included Bus Drivers
|
||
|
|
====================
|
||
|
|
Note that only stable drivers are patched into the kernel by 'mkpatch'.
|
||
|
|
|
||
|
|
|
||
|
|
Base modules
|
||
|
|
------------
|
||
|
|
|
||
|
|
i2c-core: The basic I2C code, including the /proc/bus/i2c* interface
|
||
|
|
i2c-dev: The /dev/i2c-* interface
|
||
|
|
i2c-proc: The /proc/sys/dev/sensors interface for device (client) drivers
|
||
|
|
|
||
|
|
Algorithm drivers
|
||
|
|
-----------------
|
||
|
|
|
||
|
|
i2c-algo-8xx: An algorithm for CPM's I2C device in Motorola 8xx processors (NOT BUILT BY DEFAULT)
|
||
|
|
i2c-algo-bit: A bit-banging algorithm
|
||
|
|
i2c-algo-pcf: A PCF 8584 style algorithm
|
||
|
|
i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT)
|
||
|
|
|
||
|
|
Adapter drivers
|
||
|
|
---------------
|
||
|
|
|
||
|
|
i2c-elektor: Elektor ISA card (uses i2c-algo-pcf)
|
||
|
|
i2c-elv: ELV parallel port adapter (uses i2c-algo-bit)
|
||
|
|
i2c-pcf-epp: PCF8584 on a EPP parallel port (uses i2c-algo-pcf) (NOT mkpatched)
|
||
|
|
i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit)
|
||
|
|
i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT)
|
||
|
|
i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit)
|
||
|
|
i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT)
|
||
|
|
i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit)
|
||
|
|
|