FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-27 11:55:53 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
38bb5253a9
linux/drivers/net/can/c_can/c_can.h

188 lines
5.0 KiB
C
Raw Normal View History

can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 06:51:44 +00:00
/*
* CAN bus driver for Bosch C_CAN controller
*
* Copyright (C) 2010 ST Microelectronics
* Bhupesh Sharma <bhupesh.sharma@st.com>
*
* Borrowed heavily from the C_CAN driver originally written by:
* Copyright (C) 2007
* - Sascha Hauer, Marc Kleine-Budde, Pengutronix <s.hauer@pengutronix.de>
* - Simon Kallweit, intefo AG <simon.kallweit@intefo.ch>
*
* Bosch C_CAN controller is compliant to CAN protocol version 2.0 part A and B.
* Bosch C_CAN user manual can be obtained from:
* http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/
* users_manual_c_can.pdf
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef C_CAN_H
#define C_CAN_H
can: c_can: Move overlay structure to array with offset as index c_can uses overlay structure for accessing c_can module registers. With this kind of implementation it is difficult to add one more ip which is similar to c_can in functionality but different register offsets. This patch changes the overlay structure implementation to an array with register offset as index. This way we can overcome the above limitation. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-29 05:43:15 +00:00
enum reg {
C_CAN_CTRL_REG = 0,
can: c_can: Add d_can suspend resume support Adds suspend resume support to DCAN driver which enables DCAN power down mode bit (PDR). Then DCAN will ack the local power-down mode by setting PDA bit in STATUS register. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21 09:59:01 +00:00
C_CAN_CTRL_EX_REG,
can: c_can: Move overlay structure to array with offset as index c_can uses overlay structure for accessing c_can module registers. With this kind of implementation it is difficult to add one more ip which is similar to c_can in functionality but different register offsets. This patch changes the overlay structure implementation to an array with register offset as index. This way we can overcome the above limitation. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-29 05:43:15 +00:00
C_CAN_STS_REG,
C_CAN_ERR_CNT_REG,
C_CAN_BTR_REG,
C_CAN_INT_REG,
C_CAN_TEST_REG,
C_CAN_BRPEXT_REG,
C_CAN_IF1_COMREQ_REG,
C_CAN_IF1_COMMSK_REG,
C_CAN_IF1_MASK1_REG,
C_CAN_IF1_MASK2_REG,
C_CAN_IF1_ARB1_REG,
C_CAN_IF1_ARB2_REG,
C_CAN_IF1_MSGCTRL_REG,
C_CAN_IF1_DATA1_REG,
C_CAN_IF1_DATA2_REG,
C_CAN_IF1_DATA3_REG,
C_CAN_IF1_DATA4_REG,
C_CAN_IF2_COMREQ_REG,
C_CAN_IF2_COMMSK_REG,
C_CAN_IF2_MASK1_REG,
C_CAN_IF2_MASK2_REG,
C_CAN_IF2_ARB1_REG,
C_CAN_IF2_ARB2_REG,
C_CAN_IF2_MSGCTRL_REG,
C_CAN_IF2_DATA1_REG,
C_CAN_IF2_DATA2_REG,
C_CAN_IF2_DATA3_REG,
C_CAN_IF2_DATA4_REG,
C_CAN_TXRQST1_REG,
C_CAN_TXRQST2_REG,
C_CAN_NEWDAT1_REG,
C_CAN_NEWDAT2_REG,
C_CAN_INTPND1_REG,
C_CAN_INTPND2_REG,
C_CAN_MSGVAL1_REG,
C_CAN_MSGVAL2_REG,
can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 06:51:44 +00:00
};
can: c_can: Move overlay structure to array with offset as index c_can uses overlay structure for accessing c_can module registers. With this kind of implementation it is difficult to add one more ip which is similar to c_can in functionality but different register offsets. This patch changes the overlay structure implementation to an array with register offset as index. This way we can overcome the above limitation. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-29 05:43:15 +00:00
static const u16 reg_map_c_can[] = {
[C_CAN_CTRL_REG] = 0x00,
[C_CAN_STS_REG] = 0x02,
[C_CAN_ERR_CNT_REG] = 0x04,
[C_CAN_BTR_REG] = 0x06,
[C_CAN_INT_REG] = 0x08,
[C_CAN_TEST_REG] = 0x0A,
[C_CAN_BRPEXT_REG] = 0x0C,
[C_CAN_IF1_COMREQ_REG] = 0x10,
[C_CAN_IF1_COMMSK_REG] = 0x12,
[C_CAN_IF1_MASK1_REG] = 0x14,
[C_CAN_IF1_MASK2_REG] = 0x16,
[C_CAN_IF1_ARB1_REG] = 0x18,
[C_CAN_IF1_ARB2_REG] = 0x1A,
[C_CAN_IF1_MSGCTRL_REG] = 0x1C,
[C_CAN_IF1_DATA1_REG] = 0x1E,
[C_CAN_IF1_DATA2_REG] = 0x20,
[C_CAN_IF1_DATA3_REG] = 0x22,
[C_CAN_IF1_DATA4_REG] = 0x24,
[C_CAN_IF2_COMREQ_REG] = 0x40,
[C_CAN_IF2_COMMSK_REG] = 0x42,
[C_CAN_IF2_MASK1_REG] = 0x44,
[C_CAN_IF2_MASK2_REG] = 0x46,
[C_CAN_IF2_ARB1_REG] = 0x48,
[C_CAN_IF2_ARB2_REG] = 0x4A,
[C_CAN_IF2_MSGCTRL_REG] = 0x4C,
[C_CAN_IF2_DATA1_REG] = 0x4E,
[C_CAN_IF2_DATA2_REG] = 0x50,
[C_CAN_IF2_DATA3_REG] = 0x52,
[C_CAN_IF2_DATA4_REG] = 0x54,
[C_CAN_TXRQST1_REG] = 0x80,
[C_CAN_TXRQST2_REG] = 0x82,
[C_CAN_NEWDAT1_REG] = 0x90,
[C_CAN_NEWDAT2_REG] = 0x92,
[C_CAN_INTPND1_REG] = 0xA0,
[C_CAN_INTPND2_REG] = 0xA2,
[C_CAN_MSGVAL1_REG] = 0xB0,
[C_CAN_MSGVAL2_REG] = 0xB2,
can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 06:51:44 +00:00
};
can: c_can: Add support for Bosch D_CAN controller This patch adds the support for D_CAN controller driver to the existing C_CAN driver. Bosch D_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch D_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ ipmodules_1/can/d_can_users_manual_111.pdf A new array is added for accessing the d_can registers, according to d_can controller register space. Current D_CAN implementation has following limitations, this is done to avoid large changes to the C_CAN driver. 1. Message objects are limited to 32, 16 for RX and 16 for TX. C_CAN IP supports upto 32 message objects but in case of D_CAN we can configure upto 128 message objects. 2. Using two 16bit reads/writes for accessing the 32bit D_CAN registers. 3. These patches have been tested on little endian machine, there might be some hidden endian-related issues due to the nature of the accesses (32-bit registers accessed as 2 16-bit registers). However, I do not have a big-endian D_CAN implementation to confirm. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-29 05:43:16 +00:00
static const u16 reg_map_d_can[] = {
[C_CAN_CTRL_REG] = 0x00,
can: c_can: Add d_can suspend resume support Adds suspend resume support to DCAN driver which enables DCAN power down mode bit (PDR). Then DCAN will ack the local power-down mode by setting PDA bit in STATUS register. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21 09:59:01 +00:00
[C_CAN_CTRL_EX_REG] = 0x02,
can: c_can: Add support for Bosch D_CAN controller This patch adds the support for D_CAN controller driver to the existing C_CAN driver. Bosch D_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch D_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ ipmodules_1/can/d_can_users_manual_111.pdf A new array is added for accessing the d_can registers, according to d_can controller register space. Current D_CAN implementation has following limitations, this is done to avoid large changes to the C_CAN driver. 1. Message objects are limited to 32, 16 for RX and 16 for TX. C_CAN IP supports upto 32 message objects but in case of D_CAN we can configure upto 128 message objects. 2. Using two 16bit reads/writes for accessing the 32bit D_CAN registers. 3. These patches have been tested on little endian machine, there might be some hidden endian-related issues due to the nature of the accesses (32-bit registers accessed as 2 16-bit registers). However, I do not have a big-endian D_CAN implementation to confirm. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-29 05:43:16 +00:00
[C_CAN_STS_REG] = 0x04,
[C_CAN_ERR_CNT_REG] = 0x08,
[C_CAN_BTR_REG] = 0x0C,
[C_CAN_BRPEXT_REG] = 0x0E,
[C_CAN_INT_REG] = 0x10,
[C_CAN_TEST_REG] = 0x14,
[C_CAN_TXRQST1_REG] = 0x88,
[C_CAN_TXRQST2_REG] = 0x8A,
[C_CAN_NEWDAT1_REG] = 0x9C,
[C_CAN_NEWDAT2_REG] = 0x9E,
[C_CAN_INTPND1_REG] = 0xB0,
[C_CAN_INTPND2_REG] = 0xB2,
[C_CAN_MSGVAL1_REG] = 0xC4,
[C_CAN_MSGVAL2_REG] = 0xC6,
[C_CAN_IF1_COMREQ_REG] = 0x100,
[C_CAN_IF1_COMMSK_REG] = 0x102,
[C_CAN_IF1_MASK1_REG] = 0x104,
[C_CAN_IF1_MASK2_REG] = 0x106,
[C_CAN_IF1_ARB1_REG] = 0x108,
[C_CAN_IF1_ARB2_REG] = 0x10A,
[C_CAN_IF1_MSGCTRL_REG] = 0x10C,
[C_CAN_IF1_DATA1_REG] = 0x110,
[C_CAN_IF1_DATA2_REG] = 0x112,
[C_CAN_IF1_DATA3_REG] = 0x114,
[C_CAN_IF1_DATA4_REG] = 0x116,
[C_CAN_IF2_COMREQ_REG] = 0x120,
[C_CAN_IF2_COMMSK_REG] = 0x122,
[C_CAN_IF2_MASK1_REG] = 0x124,
[C_CAN_IF2_MASK2_REG] = 0x126,
[C_CAN_IF2_ARB1_REG] = 0x128,
[C_CAN_IF2_ARB2_REG] = 0x12A,
[C_CAN_IF2_MSGCTRL_REG] = 0x12C,
[C_CAN_IF2_DATA1_REG] = 0x130,
[C_CAN_IF2_DATA2_REG] = 0x132,
[C_CAN_IF2_DATA3_REG] = 0x134,
[C_CAN_IF2_DATA4_REG] = 0x136,
};
enum c_can_dev_id {
can: c_can: Modify c_can device names Modify c_can device names from *_CAN_DEVTYPE to BOSCH_*_CAN to make use of same names for array indexes in c_can_id_table[] as well as device names. This patch also add indexes to c_can_id_table array. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-08-02 13:13:09 +00:00
BOSCH_C_CAN_PLATFORM,
BOSCH_C_CAN,
BOSCH_D_CAN,
can: c_can: Add support for Bosch D_CAN controller This patch adds the support for D_CAN controller driver to the existing C_CAN driver. Bosch D_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch D_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ ipmodules_1/can/d_can_users_manual_111.pdf A new array is added for accessing the d_can registers, according to d_can controller register space. Current D_CAN implementation has following limitations, this is done to avoid large changes to the C_CAN driver. 1. Message objects are limited to 32, 16 for RX and 16 for TX. C_CAN IP supports upto 32 message objects but in case of D_CAN we can configure upto 128 message objects. 2. Using two 16bit reads/writes for accessing the 32bit D_CAN registers. 3. These patches have been tested on little endian machine, there might be some hidden endian-related issues due to the nature of the accesses (32-bit registers accessed as 2 16-bit registers). However, I do not have a big-endian D_CAN implementation to confirm. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-29 05:43:16 +00:00
};
can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 06:51:44 +00:00
/* c_can private data structure */
struct c_can_priv {
struct can_priv can; /* must be the first member */
struct napi_struct napi;
struct net_device *dev;
can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller Add Runtime PM support to C_CAN/D_CAN controller. The runtime PM APIs control clocks for C_CAN/D_CAN IP and prevent access to the register of C_CAN/D_CAN IP when clock is turned off. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-08-20 11:20:54 +00:00
struct device *device;
can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 06:51:44 +00:00
int tx_object;
int current_status;
int last_status;
can: c_can: Move overlay structure to array with offset as index c_can uses overlay structure for accessing c_can module registers. With this kind of implementation it is difficult to add one more ip which is similar to c_can in functionality but different register offsets. This patch changes the overlay structure implementation to an array with register offset as index. This way we can overcome the above limitation. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-29 05:43:15 +00:00
u16 (*read_reg) (struct c_can_priv *priv, enum reg index);
void (*write_reg) (struct c_can_priv *priv, enum reg index, u16 val);
void __iomem *base;
const u16 *regs;
can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 06:51:44 +00:00
unsigned long irq_flags; /* for request_irq() */
unsigned int tx_next;
unsigned int tx_echo;
void *priv; /* for board-specific data */
can: c_can: fix an interrupt thrash issue with c_can driver This patch fixes an interrupt thrash issue with c_can driver. In c_can_isr() function interrupts are disabled and enabled only in c_can_poll() function. c_can_isr() & c_can_poll() both read the irqstatus flag. However, irqstatus is always read as 0 in c_can_poll() because all C_CAN interrupts are disabled in c_can_isr(). This causes all interrupts to be re-enabled in c_can_poll() which in turn causes another interrupt since the event is not really handled. This keeps happening causing a flood of interrupts. To fix this, read the irqstatus register in isr and use the same cached value in the poll function. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-23 12:15:10 +00:00
u16 irqstatus;
can: c_can: Add d_can suspend resume support Adds suspend resume support to DCAN driver which enables DCAN power down mode bit (PDR). Then DCAN will ack the local power-down mode by setting PDA bit in STATUS register. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21 09:59:01 +00:00
enum c_can_dev_id type;
can: c_can: Add d_can raminit support Add D_CAN raminit support to C_CAN driver to enable D_CAN RAM, which holds all the message objects during transmission or receiving of data. This initialization/de-initialization should be done in synchronous with D_CAN clock. In case of AM335X-EVM (current user of D_CAN driver) message RAM is controlled through control module register for both instances. So control module register details is required to initialization or de-initialization of message RAM according to instance number. Control module memory resource is obtained from D_CAN dt node and instance number obtained from device tree aliases node. This patch was tested on AM335x-EVM along with pinctrl data addition patch, d_can dt aliases addition and control module data addition. pinctrl data addition is not added to am335x-evm.dts (only supports CPLD profile#0) because d_can1 is supported under CPLD profile#1. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [mkl: fix instance for non DT in probe, cleaned up raminit] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-11-21 05:44:10 +00:00
u32 __iomem *raminit_ctrlreg;
unsigned int instance;
void (*raminit) (const struct c_can_priv *priv, bool enable);
can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 06:51:44 +00:00
};
struct net_device *alloc_c_can_dev(void);
void free_c_can_dev(struct net_device *dev);
int register_c_can_dev(struct net_device *dev);
void unregister_c_can_dev(struct net_device *dev);
can: c_can: Add d_can suspend resume support Adds suspend resume support to DCAN driver which enables DCAN power down mode bit (PDR). Then DCAN will ack the local power-down mode by setting PDA bit in STATUS register. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21 09:59:01 +00:00
#ifdef CONFIG_PM
int c_can_power_up(struct net_device *dev);
int c_can_power_down(struct net_device *dev);
#endif
can: c_can: Added support for Bosch C_CAN controller Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14 06:51:44 +00:00
#endif /* C_CAN_H */
Reference in New Issue Copy Permalink