linux/drivers/video/fsl-diu-fb.c

1837 lines
46 KiB
C
Raw Normal View History

fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/*
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
*
* Freescale DIU Frame Buffer device driver
*
* Authors: Hongjun Chen <hong-jun.chen@freescale.com>
* Paul Widmer <paul.widmer@freescale.com>
* Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
* York Sun <yorksun@freescale.com>
*
* Based on imxfb.c Copyright (C) 2004 S.Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/spinlock.h>
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
#include <sysdev/fsl_soc.h>
#include <linux/fsl-diu-fb.h>
#include "edid.h"
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
#define FSL_AOI_NUM 6 /* 5 AOIs and one dummy AOI */
/* 1 for plane 0, 2 for plane 1&2 each */
/* HW cursor parameters */
#define MAX_CURS 32
/* INT_STATUS/INT_MASK field descriptions */
#define INT_VSYNC 0x01 /* Vsync interrupt */
#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */
#define INT_UNDRUN 0x04 /* Under run exception interrupt */
#define INT_PARERR 0x08 /* Display parameters error interrupt */
#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */
struct diu_addr {
void *vaddr; /* Virtual address */
dma_addr_t paddr; /* Physical address */
__u32 offset;
};
struct diu_pool {
struct diu_addr ad;
struct diu_addr gamma;
struct diu_addr pallete;
struct diu_addr cursor;
};
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/*
* List of supported video modes
*
* The first entry is the default video mode. The remain entries are in
* order if increasing resolution and frequency. The 320x240-60 mode is
* the initial AOI for the second and third planes.
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
*/
static struct fb_videomode __devinitdata fsl_diu_mode_db[] = {
{
.refresh = 60,
.xres = 1024,
.yres = 768,
.pixclock = 15385,
.left_margin = 160,
.right_margin = 24,
.upper_margin = 29,
.lower_margin = 3,
.hsync_len = 136,
.vsync_len = 6,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 60,
.xres = 320,
.yres = 240,
.pixclock = 79440,
.left_margin = 16,
.right_margin = 16,
.upper_margin = 16,
.lower_margin = 5,
.hsync_len = 48,
.vsync_len = 1,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39722,
.left_margin = 48,
.right_margin = 16,
.upper_margin = 33,
.lower_margin = 10,
.hsync_len = 96,
.vsync_len = 2,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 72,
.xres = 640,
.yres = 480,
.pixclock = 32052,
.left_margin = 128,
.right_margin = 24,
.upper_margin = 28,
.lower_margin = 9,
.hsync_len = 40,
.vsync_len = 3,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 75,
.xres = 640,
.yres = 480,
.pixclock = 31747,
.left_margin = 120,
.right_margin = 16,
.upper_margin = 16,
.lower_margin = 1,
.hsync_len = 64,
.vsync_len = 3,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 90,
.xres = 640,
.yres = 480,
.pixclock = 25057,
.left_margin = 120,
.right_margin = 32,
.upper_margin = 14,
.lower_margin = 25,
.hsync_len = 40,
.vsync_len = 14,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 100,
.xres = 640,
.yres = 480,
.pixclock = 22272,
.left_margin = 48,
.right_margin = 32,
.upper_margin = 17,
.lower_margin = 22,
.hsync_len = 128,
.vsync_len = 12,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 60,
.xres = 800,
.yres = 480,
.pixclock = 33805,
.left_margin = 96,
.right_margin = 24,
.upper_margin = 10,
.lower_margin = 3,
.hsync_len = 72,
.vsync_len = 7,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 60,
.xres = 800,
.yres = 600,
.pixclock = 25000,
.left_margin = 88,
.right_margin = 40,
.upper_margin = 23,
.lower_margin = 1,
.hsync_len = 128,
.vsync_len = 4,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 60,
.xres = 854,
.yres = 480,
.pixclock = 31518,
.left_margin = 104,
.right_margin = 16,
.upper_margin = 13,
.lower_margin = 1,
.hsync_len = 88,
.vsync_len = 3,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
.refresh = 70,
.xres = 1024,
.yres = 768,
.pixclock = 16886,
.left_margin = 3,
.right_margin = 3,
.upper_margin = 2,
.lower_margin = 2,
.hsync_len = 40,
.vsync_len = 18,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 75,
.xres = 1024,
.yres = 768,
.pixclock = 15009,
.left_margin = 3,
.right_margin = 3,
.upper_margin = 2,
.lower_margin = 2,
.hsync_len = 80,
.vsync_len = 32,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 60,
.xres = 1280,
.yres = 480,
.pixclock = 18939,
.left_margin = 353,
.right_margin = 47,
.upper_margin = 39,
.lower_margin = 4,
.hsync_len = 8,
.vsync_len = 2,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 60,
.xres = 1280,
.yres = 720,
.pixclock = 13426,
.left_margin = 192,
.right_margin = 64,
.upper_margin = 22,
.lower_margin = 1,
.hsync_len = 136,
.vsync_len = 3,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
.refresh = 60,
.xres = 1280,
.yres = 1024,
.pixclock = 9375,
.left_margin = 38,
.right_margin = 128,
.upper_margin = 2,
.lower_margin = 7,
.hsync_len = 216,
.vsync_len = 37,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 70,
.xres = 1280,
.yres = 1024,
.pixclock = 9380,
.left_margin = 6,
.right_margin = 6,
.upper_margin = 4,
.lower_margin = 4,
.hsync_len = 60,
.vsync_len = 94,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 75,
.xres = 1280,
.yres = 1024,
.pixclock = 9380,
.left_margin = 6,
.right_margin = 6,
.upper_margin = 4,
.lower_margin = 4,
.hsync_len = 60,
.vsync_len = 15,
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
{
.refresh = 60,
.xres = 1920,
.yres = 1080,
.pixclock = 5787,
.left_margin = 328,
.right_margin = 120,
.upper_margin = 34,
.lower_margin = 1,
.hsync_len = 208,
.vsync_len = 3,
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
.sync = FB_SYNC_COMP_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
},
};
static char *fb_mode;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
static unsigned long default_bpp = 32;
static enum fsl_diu_monitor_port monitor_port;
static char *monitor_string;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
#if defined(CONFIG_NOT_COHERENT_CACHE)
static u8 *coherence_data;
static size_t coherence_data_size;
static unsigned int d_cache_line_size;
#endif
static DEFINE_SPINLOCK(diu_lock);
struct fsl_diu_data {
struct fb_info *fsl_diu_info[FSL_AOI_NUM - 1];
/*FSL_AOI_NUM has one dummy AOI */
struct device_attribute dev_attr;
struct diu_ad *dummy_ad;
void *dummy_aoi_virt;
unsigned int irq;
int fb_enabled;
enum fsl_diu_monitor_port monitor_port;
struct diu __iomem *diu_reg;
spinlock_t reg_lock;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
};
enum mfb_index {
PLANE0 = 0, /* Plane 0, only one AOI that fills the screen */
PLANE1_AOI0, /* Plane 1, first AOI */
PLANE1_AOI1, /* Plane 1, second AOI */
PLANE2_AOI0, /* Plane 2, first AOI */
PLANE2_AOI1, /* Plane 2, second AOI */
};
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
struct mfb_info {
enum mfb_index index;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
char *id;
int registered;
unsigned long pseudo_palette[16];
struct diu_ad *ad;
int cursor_reset;
unsigned char g_alpha;
unsigned int count;
int x_aoi_d; /* aoi display x offset to physical screen */
int y_aoi_d; /* aoi display y offset to physical screen */
struct fsl_diu_data *parent;
u8 *edid_data;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
};
static struct mfb_info mfb_template[] = {
{
.index = PLANE0,
.id = "Panel0",
.registered = 0,
.count = 0,
.x_aoi_d = 0,
.y_aoi_d = 0,
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
},
{
.index = PLANE1_AOI0,
.id = "Panel1 AOI0",
.registered = 0,
.g_alpha = 0xff,
.count = 0,
.x_aoi_d = 0,
.y_aoi_d = 0,
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
},
{
.index = PLANE1_AOI1,
.id = "Panel1 AOI1",
.registered = 0,
.g_alpha = 0xff,
.count = 0,
.x_aoi_d = 0,
.y_aoi_d = 480,
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
},
{
.index = PLANE2_AOI0,
.id = "Panel2 AOI0",
.registered = 0,
.g_alpha = 0xff,
.count = 0,
.x_aoi_d = 640,
.y_aoi_d = 0,
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
},
{
.index = PLANE2_AOI1,
.id = "Panel2 AOI1",
.registered = 0,
.g_alpha = 0xff,
.count = 0,
.x_aoi_d = 640,
.y_aoi_d = 480,
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
},
};
static struct diu_pool pool;
/**
* fsl_diu_name_to_port - convert a port name to a monitor port enum
*
* Takes the name of a monitor port ("dvi", "lvds", or "dlvds") and returns
* the enum fsl_diu_monitor_port that corresponds to that string.
*
* For compatibility with older versions, a number ("0", "1", or "2") is also
* supported.
*
* If the string is unknown, DVI is assumed.
*
* If the particular port is not supported by the platform, another port
* (platform-specific) is chosen instead.
*/
static enum fsl_diu_monitor_port fsl_diu_name_to_port(const char *s)
{
enum fsl_diu_monitor_port port = FSL_DIU_PORT_DVI;
unsigned long val;
if (s) {
if (!strict_strtoul(s, 10, &val) && (val <= 2))
port = (enum fsl_diu_monitor_port) val;
else if (strncmp(s, "lvds", 4) == 0)
port = FSL_DIU_PORT_LVDS;
else if (strncmp(s, "dlvds", 5) == 0)
port = FSL_DIU_PORT_DLVDS;
}
return diu_ops.valid_monitor_port(port);
}
/**
* fsl_diu_alloc - allocate memory for the DIU
* @size: number of bytes to allocate
* @param: returned physical address of memory
*
* This function allocates a physically-contiguous block of memory.
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
*/
static void *fsl_diu_alloc(size_t size, phys_addr_t *phys)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
void *virt;
virt = alloc_pages_exact(size, GFP_DMA | __GFP_ZERO);
if (virt)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
*phys = virt_to_phys(virt);
return virt;
}
/**
* fsl_diu_free - release DIU memory
* @virt: pointer returned by fsl_diu_alloc()
* @size: number of bytes allocated by fsl_diu_alloc()
*
* This function releases memory allocated by fsl_diu_alloc().
*/
static void fsl_diu_free(void *virt, size_t size)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
if (virt && size)
free_pages_exact(virt, size);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
/*
* Workaround for failed writing desc register of planes.
* Needed with MPC5121 DIU rev 2.0 silicon.
*/
void wr_reg_wa(u32 *reg, u32 val)
{
do {
out_be32(reg, val);
} while (in_be32(reg) != val);
}
static void fsl_diu_enable_panel(struct fb_info *info)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
struct diu_ad *ad = mfbi->ad;
struct fsl_diu_data *machine_data = mfbi->parent;
struct diu __iomem *hw = machine_data->diu_reg;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
switch (mfbi->index) {
case PLANE0:
if (hw->desc[0] != ad->paddr)
wr_reg_wa(&hw->desc[0], ad->paddr);
break;
case PLANE1_AOI0:
cmfbi = machine_data->fsl_diu_info[2]->par;
if (hw->desc[1] != ad->paddr) { /* AOI0 closed */
if (cmfbi->count > 0) /* AOI1 open */
ad->next_ad =
cpu_to_le32(cmfbi->ad->paddr);
else
ad->next_ad = 0;
wr_reg_wa(&hw->desc[1], ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
break;
case PLANE2_AOI0:
cmfbi = machine_data->fsl_diu_info[4]->par;
if (hw->desc[2] != ad->paddr) { /* AOI0 closed */
if (cmfbi->count > 0) /* AOI1 open */
ad->next_ad =
cpu_to_le32(cmfbi->ad->paddr);
else
ad->next_ad = 0;
wr_reg_wa(&hw->desc[2], ad->paddr);
}
break;
case PLANE1_AOI1:
pmfbi = machine_data->fsl_diu_info[1]->par;
ad->next_ad = 0;
if (hw->desc[1] == machine_data->dummy_ad->paddr)
wr_reg_wa(&hw->desc[1], ad->paddr);
else /* AOI0 open */
pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
break;
case PLANE2_AOI1:
pmfbi = machine_data->fsl_diu_info[3]->par;
ad->next_ad = 0;
if (hw->desc[2] == machine_data->dummy_ad->paddr)
wr_reg_wa(&hw->desc[2], ad->paddr);
else /* AOI0 was open */
pmfbi->ad->next_ad = cpu_to_le32(ad->paddr);
break;
}
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
static void fsl_diu_disable_panel(struct fb_info *info)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct mfb_info *pmfbi, *cmfbi, *mfbi = info->par;
struct diu_ad *ad = mfbi->ad;
struct fsl_diu_data *machine_data = mfbi->parent;
struct diu __iomem *hw = machine_data->diu_reg;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
switch (mfbi->index) {
case PLANE0:
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (hw->desc[0] != machine_data->dummy_ad->paddr)
wr_reg_wa(&hw->desc[0], machine_data->dummy_ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
break;
case PLANE1_AOI0:
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
cmfbi = machine_data->fsl_diu_info[2]->par;
if (cmfbi->count > 0) /* AOI1 is open */
wr_reg_wa(&hw->desc[1], cmfbi->ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* move AOI1 to the first */
else /* AOI1 was closed */
wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* close AOI 0 */
break;
case PLANE2_AOI0:
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
cmfbi = machine_data->fsl_diu_info[4]->par;
if (cmfbi->count > 0) /* AOI1 is open */
wr_reg_wa(&hw->desc[2], cmfbi->ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* move AOI1 to the first */
else /* AOI1 was closed */
wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* close AOI 0 */
break;
case PLANE1_AOI1:
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
pmfbi = machine_data->fsl_diu_info[1]->par;
if (hw->desc[1] != ad->paddr) {
/* AOI1 is not the first in the chain */
if (pmfbi->count > 0)
/* AOI0 is open, must be the first */
pmfbi->ad->next_ad = 0;
} else /* AOI1 is the first in the chain */
wr_reg_wa(&hw->desc[1], machine_data->dummy_ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* close AOI 1 */
break;
case PLANE2_AOI1:
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
pmfbi = machine_data->fsl_diu_info[3]->par;
if (hw->desc[2] != ad->paddr) {
/* AOI1 is not the first in the chain */
if (pmfbi->count > 0)
/* AOI0 is open, must be the first */
pmfbi->ad->next_ad = 0;
} else /* AOI1 is the first in the chain */
wr_reg_wa(&hw->desc[2], machine_data->dummy_ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* close AOI 1 */
break;
}
}
static void enable_lcdc(struct fb_info *info)
{
struct mfb_info *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
struct diu __iomem *hw = machine_data->diu_reg;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (!machine_data->fb_enabled) {
out_be32(&hw->diu_mode, MFB_MODE1);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
machine_data->fb_enabled++;
}
}
static void disable_lcdc(struct fb_info *info)
{
struct mfb_info *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
struct diu __iomem *hw = machine_data->diu_reg;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (machine_data->fb_enabled) {
out_be32(&hw->diu_mode, 0);
machine_data->fb_enabled = 0;
}
}
static void adjust_aoi_size_position(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct mfb_info *lower_aoi_mfbi, *upper_aoi_mfbi, *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
int available_height, upper_aoi_bottom;
enum mfb_index index = mfbi->index;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
int lower_aoi_is_open, upper_aoi_is_open;
__u32 base_plane_width, base_plane_height, upper_aoi_height;
base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
if (mfbi->x_aoi_d < 0)
mfbi->x_aoi_d = 0;
if (mfbi->y_aoi_d < 0)
mfbi->y_aoi_d = 0;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
switch (index) {
case PLANE0:
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (mfbi->x_aoi_d != 0)
mfbi->x_aoi_d = 0;
if (mfbi->y_aoi_d != 0)
mfbi->y_aoi_d = 0;
break;
case PLANE1_AOI0:
case PLANE2_AOI0:
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
lower_aoi_mfbi = machine_data->fsl_diu_info[index+1]->par;
lower_aoi_is_open = lower_aoi_mfbi->count > 0 ? 1 : 0;
if (var->xres > base_plane_width)
var->xres = base_plane_width;
if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
mfbi->x_aoi_d = base_plane_width - var->xres;
if (lower_aoi_is_open)
available_height = lower_aoi_mfbi->y_aoi_d;
else
available_height = base_plane_height;
if (var->yres > available_height)
var->yres = available_height;
if ((mfbi->y_aoi_d + var->yres) > available_height)
mfbi->y_aoi_d = available_height - var->yres;
break;
case PLANE1_AOI1:
case PLANE2_AOI1:
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
upper_aoi_mfbi = machine_data->fsl_diu_info[index-1]->par;
upper_aoi_height =
machine_data->fsl_diu_info[index-1]->var.yres;
upper_aoi_bottom = upper_aoi_mfbi->y_aoi_d + upper_aoi_height;
upper_aoi_is_open = upper_aoi_mfbi->count > 0 ? 1 : 0;
if (var->xres > base_plane_width)
var->xres = base_plane_width;
if ((mfbi->x_aoi_d + var->xres) > base_plane_width)
mfbi->x_aoi_d = base_plane_width - var->xres;
if (mfbi->y_aoi_d < 0)
mfbi->y_aoi_d = 0;
if (upper_aoi_is_open) {
if (mfbi->y_aoi_d < upper_aoi_bottom)
mfbi->y_aoi_d = upper_aoi_bottom;
available_height = base_plane_height
- upper_aoi_bottom;
} else
available_height = base_plane_height;
if (var->yres > available_height)
var->yres = available_height;
if ((mfbi->y_aoi_d + var->yres) > base_plane_height)
mfbi->y_aoi_d = base_plane_height - var->yres;
break;
}
}
/*
* Checks to see if the hardware supports the state requested by var passed
* in. This function does not alter the hardware state! If the var passed in
* is slightly off by what the hardware can support then we alter the var
* PASSED in to what we can do. If the hardware doesn't support mode change
* a -EINVAL will be returned by the upper layers.
*/
static int fsl_diu_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
if (var->xres_virtual < var->xres)
var->xres_virtual = var->xres;
if (var->yres_virtual < var->yres)
var->yres_virtual = var->yres;
if (var->xoffset < 0)
var->xoffset = 0;
if (var->yoffset < 0)
var->yoffset = 0;
if (var->xoffset + info->var.xres > info->var.xres_virtual)
var->xoffset = info->var.xres_virtual - info->var.xres;
if (var->yoffset + info->var.yres > info->var.yres_virtual)
var->yoffset = info->var.yres_virtual - info->var.yres;
if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) &&
(var->bits_per_pixel != 16))
var->bits_per_pixel = default_bpp;
switch (var->bits_per_pixel) {
case 16:
var->red.length = 5;
var->red.offset = 11;
var->red.msb_right = 0;
var->green.length = 6;
var->green.offset = 5;
var->green.msb_right = 0;
var->blue.length = 5;
var->blue.offset = 0;
var->blue.msb_right = 0;
var->transp.length = 0;
var->transp.offset = 0;
var->transp.msb_right = 0;
break;
case 24:
var->red.length = 8;
var->red.offset = 0;
var->red.msb_right = 0;
var->green.length = 8;
var->green.offset = 8;
var->green.msb_right = 0;
var->blue.length = 8;
var->blue.offset = 16;
var->blue.msb_right = 0;
var->transp.length = 0;
var->transp.offset = 0;
var->transp.msb_right = 0;
break;
case 32:
var->red.length = 8;
var->red.offset = 16;
var->red.msb_right = 0;
var->green.length = 8;
var->green.offset = 8;
var->green.msb_right = 0;
var->blue.length = 8;
var->blue.offset = 0;
var->blue.msb_right = 0;
var->transp.length = 8;
var->transp.offset = 24;
var->transp.msb_right = 0;
break;
}
var->height = -1;
var->width = -1;
var->grayscale = 0;
/* Copy nonstd field to/from sync for fbset usage */
var->sync |= var->nonstd;
var->nonstd |= var->sync;
adjust_aoi_size_position(var, info);
return 0;
}
static void set_fix(struct fb_info *info)
{
struct fb_fix_screeninfo *fix = &info->fix;
struct fb_var_screeninfo *var = &info->var;
struct mfb_info *mfbi = info->par;
strncpy(fix->id, mfbi->id, sizeof(fix->id));
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
fix->line_length = var->xres_virtual * var->bits_per_pixel / 8;
fix->type = FB_TYPE_PACKED_PIXELS;
fix->accel = FB_ACCEL_NONE;
fix->visual = FB_VISUAL_TRUECOLOR;
fix->xpanstep = 1;
fix->ypanstep = 1;
}
static void update_lcdc(struct fb_info *info)
{
struct fb_var_screeninfo *var = &info->var;
struct mfb_info *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
struct diu __iomem *hw;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
int i, j;
char __iomem *cursor_base, *gamma_table_base;
u32 temp;
hw = machine_data->diu_reg;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
diu_ops.set_monitor_port(machine_data->monitor_port);
gamma_table_base = pool.gamma.vaddr;
cursor_base = pool.cursor.vaddr;
/* Prep for DIU init - gamma table, cursor table */
for (i = 0; i <= 2; i++)
for (j = 0; j <= 255; j++)
*gamma_table_base++ = j;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
diu_ops.set_gamma_table(machine_data->monitor_port, pool.gamma.vaddr);
disable_lcdc(info);
/* Program DIU registers */
out_be32(&hw->gamma, pool.gamma.paddr);
out_be32(&hw->cursor, pool.cursor.paddr);
out_be32(&hw->bgnd, 0x007F7F7F); /* BGND */
out_be32(&hw->bgnd_wb, 0); /* BGND_WB */
out_be32(&hw->disp_size, (var->yres << 16 | var->xres));
/* DISP SIZE */
out_be32(&hw->wb_size, 0); /* WB SIZE */
out_be32(&hw->wb_mem_addr, 0); /* WB MEM ADDR */
/* Horizontal and vertical configuration register */
temp = var->left_margin << 22 | /* BP_H */
var->hsync_len << 11 | /* PW_H */
var->right_margin; /* FP_H */
out_be32(&hw->hsyn_para, temp);
temp = var->upper_margin << 22 | /* BP_V */
var->vsync_len << 11 | /* PW_V */
var->lower_margin; /* FP_V */
out_be32(&hw->vsyn_para, temp);
diu_ops.set_pixel_clock(var->pixclock);
out_be32(&hw->syn_pol, 0); /* SYNC SIGNALS POLARITY */
out_be32(&hw->thresholds, 0x00037800); /* The Thresholds */
out_be32(&hw->int_status, 0); /* INTERRUPT STATUS */
out_be32(&hw->plut, 0x01F5F666);
/* Enable the DIU */
enable_lcdc(info);
}
static int map_video_memory(struct fb_info *info)
{
phys_addr_t phys;
u32 smem_len = info->fix.line_length * info->var.yres_virtual;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
info->screen_base = fsl_diu_alloc(smem_len, &phys);
fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Timur Tabi <timur@freescale.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: York Sun <yorksun@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 16:59:38 +00:00
if (info->screen_base == NULL) {
dev_err(info->dev, "unable to allocate fb memory\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return -ENOMEM;
}
mutex_lock(&info->mm_lock);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
info->fix.smem_start = (unsigned long) phys;
info->fix.smem_len = smem_len;
mutex_unlock(&info->mm_lock);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
info->screen_size = info->fix.smem_len;
return 0;
}
static void unmap_video_memory(struct fb_info *info)
{
fsl_diu_free(info->screen_base, info->fix.smem_len);
mutex_lock(&info->mm_lock);
fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Timur Tabi <timur@freescale.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: York Sun <yorksun@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 16:59:38 +00:00
info->screen_base = NULL;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
info->fix.smem_start = 0;
info->fix.smem_len = 0;
mutex_unlock(&info->mm_lock);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
/*
* Using the fb_var_screeninfo in fb_info we set the aoi of this
* particular framebuffer. It is a light version of fsl_diu_set_par.
*/
static int fsl_diu_set_aoi(struct fb_info *info)
{
struct fb_var_screeninfo *var = &info->var;
struct mfb_info *mfbi = info->par;
struct diu_ad *ad = mfbi->ad;
/* AOI should not be greater than display size */
ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
return 0;
}
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/*
* Using the fb_var_screeninfo in fb_info we set the resolution of this
* particular framebuffer. This function alters the fb_fix_screeninfo stored
* in fb_info. It does not alter var in fb_info since we are using that
* data. This means we depend on the data in var inside fb_info to be
* supported by the hardware. fsl_diu_check_var is always called before
* fsl_diu_set_par to ensure this.
*/
static int fsl_diu_set_par(struct fb_info *info)
{
unsigned long len;
struct fb_var_screeninfo *var = &info->var;
struct mfb_info *mfbi = info->par;
struct fsl_diu_data *machine_data = mfbi->parent;
struct diu_ad *ad = mfbi->ad;
struct diu __iomem *hw;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
hw = machine_data->diu_reg;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
set_fix(info);
mfbi->cursor_reset = 1;
len = info->var.yres_virtual * info->fix.line_length;
/* Alloc & dealloc each time resolution/bpp change */
if (len != info->fix.smem_len) {
if (info->fix.smem_start)
unmap_video_memory(info);
/* Memory allocation for framebuffer */
if (map_video_memory(info)) {
dev_err(info->dev, "unable to allocate fb memory 1\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return -ENOMEM;
}
}
ad->pix_fmt = diu_ops.get_pixel_format(machine_data->monitor_port,
var->bits_per_pixel);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ad->addr = cpu_to_le32(info->fix.smem_start);
ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
var->xres_virtual) | mfbi->g_alpha;
/* AOI should not be greater than display size */
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres);
ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
/* Disable chroma keying function */
ad->ckmax_r = 0;
ad->ckmax_g = 0;
ad->ckmax_b = 0;
ad->ckmin_r = 255;
ad->ckmin_g = 255;
ad->ckmin_b = 255;
if (mfbi->index == PLANE0)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
update_lcdc(info);
return 0;
}
static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
{
return ((val << width) + 0x7FFF - val) >> 16;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
/*
* Set a single color register. The values supplied have a 16 bit magnitude
* which needs to be scaled in this function for the hardware. Things to take
* into consideration are how many color registers, if any, are supported with
* the current color visual. With truecolor mode no color palettes are
* supported. Here a pseudo palette is created which we store the value in
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
* pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
* color palette.
*/
static int fsl_diu_setcolreg(unsigned int regno, unsigned int red,
unsigned int green, unsigned int blue,
unsigned int transp, struct fb_info *info)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
int ret = 1;
/*
* If greyscale is true, then we convert the RGB value
* to greyscale no matter what visual we are using.
*/
if (info->var.grayscale)
red = green = blue = (19595 * red + 38470 * green +
7471 * blue) >> 16;
switch (info->fix.visual) {
case FB_VISUAL_TRUECOLOR:
/*
* 16-bit True Colour. We encode the RGB value
* according to the RGB bitfield information.
*/
if (regno < 16) {
u32 *pal = info->pseudo_palette;
u32 v;
red = CNVT_TOHW(red, info->var.red.length);
green = CNVT_TOHW(green, info->var.green.length);
blue = CNVT_TOHW(blue, info->var.blue.length);
transp = CNVT_TOHW(transp, info->var.transp.length);
v = (red << info->var.red.offset) |
(green << info->var.green.offset) |
(blue << info->var.blue.offset) |
(transp << info->var.transp.offset);
pal[regno] = v;
ret = 0;
}
break;
}
return ret;
}
/*
* Pan (or wrap, depending on the `vmode' field) the display using the
* 'xoffset' and 'yoffset' fields of the 'var' structure. If the values
* don't fit, return -EINVAL.
*/
static int fsl_diu_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
if ((info->var.xoffset == var->xoffset) &&
(info->var.yoffset == var->yoffset))
return 0; /* No change, do nothing */
if (var->xoffset < 0 || var->yoffset < 0
|| var->xoffset + info->var.xres > info->var.xres_virtual
|| var->yoffset + info->var.yres > info->var.yres_virtual)
return -EINVAL;
info->var.xoffset = var->xoffset;
info->var.yoffset = var->yoffset;
if (var->vmode & FB_VMODE_YWRAP)
info->var.vmode |= FB_VMODE_YWRAP;
else
info->var.vmode &= ~FB_VMODE_YWRAP;
fsl_diu_set_aoi(info);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return 0;
}
static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg)
{
struct mfb_info *mfbi = info->par;
struct diu_ad *ad = mfbi->ad;
struct mfb_chroma_key ck;
unsigned char global_alpha;
struct aoi_display_offset aoi_d;
__u32 pix_fmt;
void __user *buf = (void __user *)arg;
if (!arg)
return -EINVAL;
switch (cmd) {
case MFB_SET_PIXFMT_OLD:
dev_warn(info->dev,
"MFB_SET_PIXFMT value of 0x%08x is deprecated.\n",
MFB_SET_PIXFMT_OLD);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
case MFB_SET_PIXFMT:
if (copy_from_user(&pix_fmt, buf, sizeof(pix_fmt)))
return -EFAULT;
ad->pix_fmt = pix_fmt;
break;
case MFB_GET_PIXFMT_OLD:
dev_warn(info->dev,
"MFB_GET_PIXFMT value of 0x%08x is deprecated.\n",
MFB_GET_PIXFMT_OLD);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
case MFB_GET_PIXFMT:
pix_fmt = ad->pix_fmt;
if (copy_to_user(buf, &pix_fmt, sizeof(pix_fmt)))
return -EFAULT;
break;
case MFB_SET_AOID:
if (copy_from_user(&aoi_d, buf, sizeof(aoi_d)))
return -EFAULT;
mfbi->x_aoi_d = aoi_d.x_aoi_d;
mfbi->y_aoi_d = aoi_d.y_aoi_d;
fsl_diu_check_var(&info->var, info);
fsl_diu_set_aoi(info);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
break;
case MFB_GET_AOID:
aoi_d.x_aoi_d = mfbi->x_aoi_d;
aoi_d.y_aoi_d = mfbi->y_aoi_d;
if (copy_to_user(buf, &aoi_d, sizeof(aoi_d)))
return -EFAULT;
break;
case MFB_GET_ALPHA:
global_alpha = mfbi->g_alpha;
if (copy_to_user(buf, &global_alpha, sizeof(global_alpha)))
return -EFAULT;
break;
case MFB_SET_ALPHA:
/* set panel information */
if (copy_from_user(&global_alpha, buf, sizeof(global_alpha)))
return -EFAULT;
ad->src_size_g_alpha = (ad->src_size_g_alpha & (~0xff)) |
(global_alpha & 0xff);
mfbi->g_alpha = global_alpha;
break;
case MFB_SET_CHROMA_KEY:
/* set panel winformation */
if (copy_from_user(&ck, buf, sizeof(ck)))
return -EFAULT;
if (ck.enable &&
(ck.red_max < ck.red_min ||
ck.green_max < ck.green_min ||
ck.blue_max < ck.blue_min))
return -EINVAL;
if (!ck.enable) {
ad->ckmax_r = 0;
ad->ckmax_g = 0;
ad->ckmax_b = 0;
ad->ckmin_r = 255;
ad->ckmin_g = 255;
ad->ckmin_b = 255;
} else {
ad->ckmax_r = ck.red_max;
ad->ckmax_g = ck.green_max;
ad->ckmax_b = ck.blue_max;
ad->ckmin_r = ck.red_min;
ad->ckmin_g = ck.green_min;
ad->ckmin_b = ck.blue_min;
}
break;
default:
dev_err(info->dev, "unknown ioctl command (0x%08X)\n", cmd);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return -ENOIOCTLCMD;
}
return 0;
}
/* turn on fb if count == 1
*/
static int fsl_diu_open(struct fb_info *info, int user)
{
struct mfb_info *mfbi = info->par;
int res = 0;
/* free boot splash memory on first /dev/fb0 open */
if ((mfbi->index == PLANE0) && diu_ops.release_bootmem)
diu_ops.release_bootmem();
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
spin_lock(&diu_lock);
mfbi->count++;
if (mfbi->count == 1) {
fsl_diu_check_var(&info->var, info);
res = fsl_diu_set_par(info);
if (res < 0)
mfbi->count--;
else
fsl_diu_enable_panel(info);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
spin_unlock(&diu_lock);
return res;
}
/* turn off fb if count == 0
*/
static int fsl_diu_release(struct fb_info *info, int user)
{
struct mfb_info *mfbi = info->par;
int res = 0;
spin_lock(&diu_lock);
mfbi->count--;
if (mfbi->count == 0)
fsl_diu_disable_panel(info);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
spin_unlock(&diu_lock);
return res;
}
static struct fb_ops fsl_diu_ops = {
.owner = THIS_MODULE,
.fb_check_var = fsl_diu_check_var,
.fb_set_par = fsl_diu_set_par,
.fb_setcolreg = fsl_diu_setcolreg,
.fb_pan_display = fsl_diu_pan_display,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_ioctl = fsl_diu_ioctl,
.fb_open = fsl_diu_open,
.fb_release = fsl_diu_release,
};
static int init_fbinfo(struct fb_info *info)
{
struct mfb_info *mfbi = info->par;
info->device = NULL;
info->var.activate = FB_ACTIVATE_NOW;
info->fbops = &fsl_diu_ops;
info->flags = FBINFO_FLAG_DEFAULT;
info->pseudo_palette = &mfbi->pseudo_palette;
/* Allocate colormap */
fb_alloc_cmap(&info->cmap, 16, 0);
return 0;
}
fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Timur Tabi <timur@freescale.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: York Sun <yorksun@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 16:59:38 +00:00
static int __devinit install_fb(struct fb_info *info)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
int rc;
struct mfb_info *mfbi = info->par;
const char *aoi_mode, *init_aoi_mode = "320x240";
struct fb_videomode *db = fsl_diu_mode_db;
unsigned int dbsize = ARRAY_SIZE(fsl_diu_mode_db);
int has_default_mode = 1;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (init_fbinfo(info))
return -EINVAL;
if (mfbi->index == PLANE0) {
if (mfbi->edid_data) {
/* Now build modedb from EDID */
fb_edid_to_monspecs(mfbi->edid_data, &info->monspecs);
fb_videomode_to_modelist(info->monspecs.modedb,
info->monspecs.modedb_len,
&info->modelist);
db = info->monspecs.modedb;
dbsize = info->monspecs.modedb_len;
}
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
aoi_mode = fb_mode;
} else {
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
aoi_mode = init_aoi_mode;
}
rc = fb_find_mode(&info->var, info, aoi_mode, db, dbsize, NULL,
default_bpp);
if (!rc) {
/*
* For plane 0 we continue and look into
* driver's internal modedb.
*/
if ((mfbi->index == PLANE0) && mfbi->edid_data)
has_default_mode = 0;
else
return -EINVAL;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
if (!has_default_mode) {
rc = fb_find_mode(&info->var, info, aoi_mode, fsl_diu_mode_db,
ARRAY_SIZE(fsl_diu_mode_db), NULL, default_bpp);
if (rc)
has_default_mode = 1;
}
/* Still not found, use preferred mode from database if any */
if (!has_default_mode && info->monspecs.modedb) {
struct fb_monspecs *specs = &info->monspecs;
struct fb_videomode *modedb = &specs->modedb[0];
/*
* Get preferred timing. If not found,
* first mode in database will be used.
*/
if (specs->misc & FB_MISC_1ST_DETAIL) {
int i;
for (i = 0; i < specs->modedb_len; i++) {
if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
modedb = &specs->modedb[i];
break;
}
}
}
info->var.bits_per_pixel = default_bpp;
fb_videomode_to_var(&info->var, modedb);
}
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (fsl_diu_check_var(&info->var, info)) {
dev_err(info->dev, "fsl_diu_check_var failed\n");
unmap_video_memory(info);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
fb_dealloc_cmap(&info->cmap);
return -EINVAL;
}
if (register_framebuffer(info) < 0) {
dev_err(info->dev, "register_framebuffer failed\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
unmap_video_memory(info);
fb_dealloc_cmap(&info->cmap);
return -EINVAL;
}
mfbi->registered = 1;
dev_info(info->dev, "%s registered successfully\n", mfbi->id);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return 0;
}
fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Timur Tabi <timur@freescale.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: York Sun <yorksun@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-04 16:59:38 +00:00
static void uninstall_fb(struct fb_info *info)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct mfb_info *mfbi = info->par;
if (!mfbi->registered)
return;
if (mfbi->index == PLANE0)
kfree(mfbi->edid_data);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
unregister_framebuffer(info);
unmap_video_memory(info);
if (&info->cmap)
fb_dealloc_cmap(&info->cmap);
mfbi->registered = 0;
}
static irqreturn_t fsl_diu_isr(int irq, void *dev_id)
{
struct diu __iomem *hw = dev_id;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
unsigned int status = in_be32(&hw->int_status);
if (status) {
/* This is the workaround for underrun */
if (status & INT_UNDRUN) {
out_be32(&hw->diu_mode, 0);
udelay(1);
out_be32(&hw->diu_mode, 1);
}
#if defined(CONFIG_NOT_COHERENT_CACHE)
else if (status & INT_VSYNC) {
unsigned int i;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
for (i = 0; i < coherence_data_size;
i += d_cache_line_size)
__asm__ __volatile__ (
"dcbz 0, %[input]"
::[input]"r"(&coherence_data[i]));
}
#endif
return IRQ_HANDLED;
}
return IRQ_NONE;
}
static int request_irq_local(struct fsl_diu_data *machine_data)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct diu __iomem *hw = machine_data->diu_reg;
u32 ints;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
int ret;
/* Read to clear the status */
in_be32(&hw->int_status);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ret = request_irq(machine_data->irq, fsl_diu_isr, 0, "fsl-diu-fb", hw);
if (!ret) {
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ints = INT_PARERR | INT_LS_BF_VS;
#if !defined(CONFIG_NOT_COHERENT_CACHE)
ints |= INT_VSYNC;
#endif
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* Read to clear the status */
in_be32(&hw->int_status);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
out_be32(&hw->int_mask, ints);
}
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return ret;
}
static void free_irq_local(struct fsl_diu_data *machine_data)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct diu __iomem *hw = machine_data->diu_reg;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* Disable all LCDC interrupt */
out_be32(&hw->int_mask, 0x1f);
free_irq(machine_data->irq, NULL);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
#ifdef CONFIG_PM
/*
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
static int fsl_diu_suspend(struct platform_device *ofdev, pm_message_t state)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct fsl_diu_data *machine_data;
machine_data = dev_get_drvdata(&ofdev->dev);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
disable_lcdc(machine_data->fsl_diu_info[0]);
return 0;
}
static int fsl_diu_resume(struct platform_device *ofdev)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct fsl_diu_data *machine_data;
machine_data = dev_get_drvdata(&ofdev->dev);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
enable_lcdc(machine_data->fsl_diu_info[0]);
return 0;
}
#else
#define fsl_diu_suspend NULL
#define fsl_diu_resume NULL
#endif /* CONFIG_PM */
/* Align to 64-bit(8-byte), 32-byte, etc. */
static int allocate_buf(struct device *dev, struct diu_addr *buf, u32 size,
u32 bytes_align)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
u32 offset;
dma_addr_t mask;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
buf->vaddr =
dma_alloc_coherent(dev, size + bytes_align, &buf->paddr,
GFP_DMA | __GFP_ZERO);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (!buf->vaddr)
return -ENOMEM;
mask = bytes_align - 1;
offset = buf->paddr & mask;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (offset) {
buf->offset = bytes_align - offset;
buf->paddr = buf->paddr + offset;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
} else
buf->offset = 0;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return 0;
}
static void free_buf(struct device *dev, struct diu_addr *buf, u32 size,
u32 bytes_align)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
dma_free_coherent(dev, size + bytes_align, buf->vaddr,
buf->paddr - buf->offset);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
static ssize_t store_monitor(struct device *device,
struct device_attribute *attr, const char *buf, size_t count)
{
enum fsl_diu_monitor_port old_monitor_port;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
old_monitor_port = machine_data->monitor_port;
machine_data->monitor_port = fsl_diu_name_to_port(buf);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (old_monitor_port != machine_data->monitor_port) {
/* All AOIs need adjust pixel format
* fsl_diu_set_par only change the pixsel format here
* unlikely to fail. */
fsl_diu_set_par(machine_data->fsl_diu_info[0]);
fsl_diu_set_par(machine_data->fsl_diu_info[1]);
fsl_diu_set_par(machine_data->fsl_diu_info[2]);
fsl_diu_set_par(machine_data->fsl_diu_info[3]);
fsl_diu_set_par(machine_data->fsl_diu_info[4]);
}
return count;
}
static ssize_t show_monitor(struct device *device,
struct device_attribute *attr, char *buf)
{
struct fsl_diu_data *machine_data =
container_of(attr, struct fsl_diu_data, dev_attr);
switch (machine_data->monitor_port) {
case FSL_DIU_PORT_DVI:
return sprintf(buf, "DVI\n");
case FSL_DIU_PORT_LVDS:
return sprintf(buf, "Single-link LVDS\n");
case FSL_DIU_PORT_DLVDS:
return sprintf(buf, "Dual-link LVDS\n");
}
return 0;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
static int __devinit fsl_diu_probe(struct platform_device *pdev)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct device_node *np = pdev->dev.of_node;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
struct mfb_info *mfbi;
phys_addr_t dummy_ad_addr = 0;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
int ret, i, error = 0;
struct fsl_diu_data *machine_data;
int diu_mode;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
machine_data = kzalloc(sizeof(struct fsl_diu_data), GFP_KERNEL);
if (!machine_data)
return -ENOMEM;
spin_lock_init(&machine_data->reg_lock);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
machine_data->fsl_diu_info[i] =
framebuffer_alloc(sizeof(struct mfb_info), &pdev->dev);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (!machine_data->fsl_diu_info[i]) {
dev_err(&pdev->dev, "cannot allocate memory\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ret = -ENOMEM;
goto error2;
}
mfbi = machine_data->fsl_diu_info[i]->par;
memcpy(mfbi, &mfb_template[i], sizeof(struct mfb_info));
mfbi->parent = machine_data;
if (mfbi->index == PLANE0) {
const u8 *prop;
int len;
/* Get EDID */
prop = of_get_property(np, "edid", &len);
if (prop && len == EDID_LENGTH)
mfbi->edid_data = kmemdup(prop, EDID_LENGTH,
GFP_KERNEL);
}
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
}
machine_data->diu_reg = of_iomap(np, 0);
if (!machine_data->diu_reg) {
dev_err(&pdev->dev, "cannot map DIU registers\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ret = -EFAULT;
goto error2;
}
diu_mode = in_be32(&machine_data->diu_reg->diu_mode);
if (diu_mode == MFB_MODE0)
out_be32(&machine_data->diu_reg->diu_mode, 0); /* disable DIU */
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/* Get the IRQ of the DIU */
machine_data->irq = irq_of_parse_and_map(np, 0);
if (!machine_data->irq) {
dev_err(&pdev->dev, "could not get DIU IRQ\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ret = -EINVAL;
goto error;
}
machine_data->monitor_port = monitor_port;
/* Area descriptor memory pool aligns to 64-bit boundary */
if (allocate_buf(&pdev->dev, &pool.ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8))
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return -ENOMEM;
/* Get memory for Gamma Table - 32-byte aligned memory */
if (allocate_buf(&pdev->dev, &pool.gamma, 768, 32)) {
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ret = -ENOMEM;
goto error;
}
/* For performance, cursor bitmap buffer aligns to 32-byte boundary */
if (allocate_buf(&pdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
32)) {
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
ret = -ENOMEM;
goto error;
}
i = ARRAY_SIZE(machine_data->fsl_diu_info);
machine_data->dummy_ad = (struct diu_ad *)
((u32)pool.ad.vaddr + pool.ad.offset) + i;
machine_data->dummy_ad->paddr = pool.ad.paddr +
i * sizeof(struct diu_ad);
machine_data->dummy_aoi_virt = fsl_diu_alloc(64, &dummy_ad_addr);
if (!machine_data->dummy_aoi_virt) {
ret = -ENOMEM;
goto error;
}
machine_data->dummy_ad->addr = cpu_to_le32(dummy_ad_addr);
machine_data->dummy_ad->pix_fmt = 0x88882317;
machine_data->dummy_ad->src_size_g_alpha = cpu_to_le32((4 << 12) | 4);
machine_data->dummy_ad->aoi_size = cpu_to_le32((4 << 16) | 2);
machine_data->dummy_ad->offset_xyi = 0;
machine_data->dummy_ad->offset_xyd = 0;
machine_data->dummy_ad->next_ad = 0;
/*
* Let DIU display splash screen if it was pre-initialized
* by the bootloader, set dummy area descriptor otherwise.
*/
if (diu_mode == MFB_MODE0)
out_be32(&machine_data->diu_reg->desc[0],
machine_data->dummy_ad->paddr);
out_be32(&machine_data->diu_reg->desc[1], machine_data->dummy_ad->paddr);
out_be32(&machine_data->diu_reg->desc[2], machine_data->dummy_ad->paddr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++) {
machine_data->fsl_diu_info[i]->fix.smem_start = 0;
mfbi = machine_data->fsl_diu_info[i]->par;
mfbi->ad = (struct diu_ad *)((u32)pool.ad.vaddr
+ pool.ad.offset) + i;
mfbi->ad->paddr = pool.ad.paddr + i * sizeof(struct diu_ad);
ret = install_fb(machine_data->fsl_diu_info[i]);
if (ret) {
dev_err(&pdev->dev, "could not register fb %d\n", i);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
goto error;
}
}
if (request_irq_local(machine_data)) {
dev_err(&pdev->dev, "could not claim irq\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
goto error;
}
sysfs_attr_init(&machine_data->dev_attr.attr);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
machine_data->dev_attr.attr.name = "monitor";
machine_data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
machine_data->dev_attr.show = show_monitor;
machine_data->dev_attr.store = store_monitor;
error = device_create_file(machine_data->fsl_diu_info[0]->dev,
&machine_data->dev_attr);
if (error) {
dev_err(&pdev->dev, "could not create sysfs file %s\n",
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
machine_data->dev_attr.attr.name);
}
dev_set_drvdata(&pdev->dev, machine_data);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return 0;
error:
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
uninstall_fb(machine_data->fsl_diu_info[i]);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (pool.ad.vaddr)
free_buf(&pdev->dev, &pool.ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (pool.gamma.vaddr)
free_buf(&pdev->dev, &pool.gamma, 768, 32);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (pool.cursor.vaddr)
free_buf(&pdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2,
32);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (machine_data->dummy_aoi_virt)
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
iounmap(machine_data->diu_reg);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
error2:
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
if (machine_data->fsl_diu_info[i])
framebuffer_release(machine_data->fsl_diu_info[i]);
kfree(machine_data);
return ret;
}
static int fsl_diu_remove(struct platform_device *pdev)
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
struct fsl_diu_data *machine_data;
int i;
machine_data = dev_get_drvdata(&pdev->dev);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
disable_lcdc(machine_data->fsl_diu_info[0]);
free_irq_local(machine_data);
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
uninstall_fb(machine_data->fsl_diu_info[i]);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (pool.ad.vaddr)
free_buf(&pdev->dev, &pool.ad,
sizeof(struct diu_ad) * FSL_AOI_NUM, 8);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (pool.gamma.vaddr)
free_buf(&pdev->dev, &pool.gamma, 768, 32);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (pool.cursor.vaddr)
free_buf(&pdev->dev, &pool.cursor, MAX_CURS * MAX_CURS * 2, 32);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (machine_data->dummy_aoi_virt)
fsl_diu_free(machine_data->dummy_aoi_virt, 64);
iounmap(machine_data->diu_reg);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
for (i = 0; i < ARRAY_SIZE(machine_data->fsl_diu_info); i++)
if (machine_data->fsl_diu_info[i])
framebuffer_release(machine_data->fsl_diu_info[i]);
kfree(machine_data);
return 0;
}
#ifndef MODULE
static int __init fsl_diu_setup(char *options)
{
char *opt;
unsigned long val;
if (!options || !*options)
return 0;
while ((opt = strsep(&options, ",")) != NULL) {
if (!*opt)
continue;
if (!strncmp(opt, "monitor=", 8)) {
monitor_port = fsl_diu_name_to_port(opt + 8);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
} else if (!strncmp(opt, "bpp=", 4)) {
if (!strict_strtoul(opt + 4, 10, &val))
default_bpp = val;
} else
fb_mode = opt;
}
return 0;
}
#endif
static struct of_device_id fsl_diu_match[] = {
#ifdef CONFIG_PPC_MPC512x
{
.compatible = "fsl,mpc5121-diu",
},
#endif
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
{
.compatible = "fsl,diu",
},
{}
};
MODULE_DEVICE_TABLE(of, fsl_diu_match);
static struct platform_driver fsl_diu_driver = {
.driver = {
.name = "fsl-diu-fb",
.owner = THIS_MODULE,
.of_match_table = fsl_diu_match,
},
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
.probe = fsl_diu_probe,
.remove = fsl_diu_remove,
.suspend = fsl_diu_suspend,
.resume = fsl_diu_resume,
};
static int __init fsl_diu_init(void)
{
#ifdef CONFIG_NOT_COHERENT_CACHE
struct device_node *np;
const u32 *prop;
#endif
int ret;
#ifndef MODULE
char *option;
/*
* For kernel boot options (in 'video=xxxfb:<options>' format)
*/
if (fb_get_options("fslfb", &option))
return -ENODEV;
fsl_diu_setup(option);
#else
monitor_port = fsl_diu_name_to_port(monitor_string);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
#endif
pr_info("Freescale Display Interface Unit (DIU) framebuffer driver\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
#ifdef CONFIG_NOT_COHERENT_CACHE
np = of_find_node_by_type(NULL, "cpu");
if (!np) {
pr_err("fsl-diu-fb: can't find 'cpu' device node\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return -ENODEV;
}
prop = of_get_property(np, "d-cache-size", NULL);
if (prop == NULL) {
pr_err("fsl-diu-fb: missing 'd-cache-size' property' "
"in 'cpu' node\n");
of_node_put(np);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return -ENODEV;
}
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
/*
* Freescale PLRU requires 13/8 times the cache size to do a proper
* displacement flush
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
*/
coherence_data_size = be32_to_cpup(prop) * 13;
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
coherence_data_size /= 8;
prop = of_get_property(np, "d-cache-line-size", NULL);
if (prop == NULL) {
pr_err("fsl-diu-fb: missing 'd-cache-line-size' property' "
"in 'cpu' node\n");
of_node_put(np);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
return -ENODEV;
}
d_cache_line_size = be32_to_cpup(prop);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
of_node_put(np);
coherence_data = vmalloc(coherence_data_size);
if (!coherence_data)
return -ENOMEM;
#endif
ret = platform_driver_register(&fsl_diu_driver);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
if (ret) {
pr_err("fsl-diu-fb: failed to register platform driver\n");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
#if defined(CONFIG_NOT_COHERENT_CACHE)
vfree(coherence_data);
#endif
}
return ret;
}
static void __exit fsl_diu_exit(void)
{
platform_driver_unregister(&fsl_diu_driver);
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00
#if defined(CONFIG_NOT_COHERENT_CACHE)
vfree(coherence_data);
#endif
}
module_init(fsl_diu_init);
module_exit(fsl_diu_exit);
MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
MODULE_DESCRIPTION("Freescale DIU framebuffer driver");
MODULE_LICENSE("GPL");
module_param_named(mode, fb_mode, charp, 0);
MODULE_PARM_DESC(mode,
"Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
module_param_named(bpp, default_bpp, ulong, 0);
MODULE_PARM_DESC(bpp, "Specify bit-per-pixel if not specified in 'mode'");
module_param_named(monitor, monitor_string, charp, 0);
MODULE_PARM_DESC(monitor, "Specify the monitor port "
"(\"dvi\", \"lvds\", or \"dlvds\") if supported by the platform");
fbdev: powerpc: driver for Freescale 8610 and 5121 DIU The following features are supported: plane 0 works as a regular frame buffer, can be accessed by /dev/fb0 plane 1 has two AOIs (area of interest), can be accessed by /dev/fb1 and /dev/fb2 plane 2 has two AOIs, can be accessed by /dev/fb3 and /dev/fb4 Special ioctls support AOIs All /dev/fb* can be used as regular frame buffer devices, except hardware change can only be made through /dev/fb0. Changing pixel clock has no effect on other fbs. Limitation of usage of AOIs: AOIs on the same plane can not be horizonally overlapped AOIs have horizonal order, i.e. AOI0 should be always on top of AOI1 AOIs can not beyond phisical display area. Application should check AOI geometry before changing physical resolution on /dev/fb0 required command line parameters to preallocate memory for frame buffer diufb. optional command line parameters to set modes and monitor video=fslfb:[resolution][,bpp][,monitor] Syntax: Resolution xres x yres-bpp@refresh_rate, the -bpp and @refresh_rate are optional eg, 1024x768, 1280x1024, 1280x1024-32, 1280x1024@60, 1280x1024-32@60, 1280x480-32@60 Bpp bpp=32, bpp=24, or bpp=16 Monitor monitor=0, monitor=1, monitor=2 0 is DVI 1 is Single link LVDS 2 is Double link LVDS Note: switching monitor is a board feather, not DIU feather. MPC8610HPCD has three monitor ports to swtich to. MPC5121ADS doesn't have additional monitor port. So switching monirot port for MPC5121ADS has no effect. If compiled as a module, it takes pamameters mode, bpp, monitor with the same syntax above. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 09:15:34 +00:00