linux/tools/perf/util/symbol.c

1436 lines
30 KiB
C
Raw Normal View History

#include "util.h"
#include "../perf.h"
#include "string.h"
#include "symbol.h"
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
#include "thread.h"
#include "debug.h"
#include <libelf.h>
#include <gelf.h>
#include <elf.h>
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
#include <sys/utsname.h>
enum dso_origin {
DSO__ORIG_KERNEL = 0,
DSO__ORIG_JAVA_JIT,
DSO__ORIG_FEDORA,
DSO__ORIG_UBUNTU,
DSO__ORIG_BUILDID,
DSO__ORIG_DSO,
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
DSO__ORIG_KMODULE,
DSO__ORIG_NOT_FOUND,
};
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
static void dsos__add(struct dso *dso);
static struct dso *dsos__find(const char *name);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
static struct map *map__new2(u64 start, struct dso *dso);
static void kernel_maps__insert(struct map *map);
unsigned int symbol__priv_size;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
static struct rb_root kernel_maps;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
static void dso__fixup_sym_end(struct dso *self)
{
struct rb_node *nd, *prevnd = rb_first(&self->syms);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
struct symbol *curr, *prev;
if (prevnd == NULL)
return;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
curr = rb_entry(prevnd, struct symbol, rb_node);
for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) {
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
prev = curr;
curr = rb_entry(nd, struct symbol, rb_node);
if (prev->end == prev->start)
prev->end = curr->start - 1;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
/* Last entry */
if (curr->end == curr->start)
curr->end = roundup(curr->start, 4096);
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
static void kernel_maps__fixup_end(void)
{
struct map *prev, *curr;
struct rb_node *nd, *prevnd = rb_first(&kernel_maps);
if (prevnd == NULL)
return;
curr = rb_entry(prevnd, struct map, rb_node);
for (nd = rb_next(prevnd); nd; nd = rb_next(nd)) {
prev = curr;
curr = rb_entry(nd, struct map, rb_node);
prev->end = curr->start - 1;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
}
nd = rb_last(&curr->dso->syms);
if (nd) {
struct symbol *sym = rb_entry(nd, struct symbol, rb_node);
curr->end = sym->end;
}
}
static struct symbol *symbol__new(u64 start, u64 len, const char *name)
{
size_t namelen = strlen(name) + 1;
struct symbol *self = calloc(1, (symbol__priv_size +
sizeof(*self) + namelen));
perf_counter tools: Add 'perf annotate' feature Add new perf sub-command to display annotated source code: $ perf annotate decode_tree_entry ------------------------------------------------ Percent | Source code & Disassembly of /home/mingo/git/git ------------------------------------------------ : : /home/mingo/git/git: file format elf64-x86-64 : : : Disassembly of section .text: : : 00000000004a0da0 <decode_tree_entry>: : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 3.82 : 4a0da0: 41 54 push %r12 : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.17 : 4a0da2: 48 83 fa 17 cmp $0x17,%rdx : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 0.00 : 4a0da6: 49 89 fc mov %rdi,%r12 0.00 : 4a0da9: 55 push %rbp 3.37 : 4a0daa: 53 push %rbx : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.08 : 4a0dab: 76 73 jbe 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dad: 80 7c 16 eb 00 cmpb $0x0,-0x15(%rsi,%rdx,1) 3.48 : 4a0db2: 75 6c jne 4a0e20 <decode_tree_entry+0x80> : static const char *get_mode(const char *str, unsigned int *modep) : { : unsigned char c; : unsigned int mode = 0; : : if (*str == ' ') 1.94 : 4a0db4: 0f b6 06 movzbl (%rsi),%eax 0.39 : 4a0db7: 3c 20 cmp $0x20,%al 0.00 : 4a0db9: 74 65 je 4a0e20 <decode_tree_entry+0x80> : return NULL; : : while ((c = *str++) != ' ') { 0.06 : 4a0dbb: 89 c2 mov %eax,%edx : if (c < '0' || c > '7') 1.99 : 4a0dbd: 31 ed xor %ebp,%ebp : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 1.74 : 4a0dbf: 48 8d 5e 01 lea 0x1(%rsi),%rbx : if (c < '0' || c > '7') 0.00 : 4a0dc3: 8d 42 d0 lea -0x30(%rdx),%eax 0.17 : 4a0dc6: 3c 07 cmp $0x7,%al 0.00 : 4a0dc8: 76 0d jbe 4a0dd7 <decode_tree_entry+0x37> 0.00 : 4a0dca: eb 54 jmp 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dcc: 0f 1f 40 00 nopl 0x0(%rax) 16.57 : 4a0dd0: 8d 42 d0 lea -0x30(%rdx),%eax 0.14 : 4a0dd3: 3c 07 cmp $0x7,%al 0.00 : 4a0dd5: 77 49 ja 4a0e20 <decode_tree_entry+0x80> : return NULL; : mode = (mode << 3) + (c - '0'); 3.12 : 4a0dd7: 0f b6 c2 movzbl %dl,%eax : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 0.00 : 4a0dda: 0f b6 13 movzbl (%rbx),%edx 16.74 : 4a0ddd: 48 83 c3 01 add $0x1,%rbx : if (c < '0' || c > '7') : return NULL; : mode = (mode << 3) + (c - '0'); The first column is the percentage of samples that arrived on that particular line - relative to the total cost of the function. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 13:48:52 +00:00
if (!self)
return NULL;
if (symbol__priv_size) {
memset(self, 0, symbol__priv_size);
self = ((void *)self) + symbol__priv_size;
}
perf_counter tools: Add 'perf annotate' feature Add new perf sub-command to display annotated source code: $ perf annotate decode_tree_entry ------------------------------------------------ Percent | Source code & Disassembly of /home/mingo/git/git ------------------------------------------------ : : /home/mingo/git/git: file format elf64-x86-64 : : : Disassembly of section .text: : : 00000000004a0da0 <decode_tree_entry>: : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 3.82 : 4a0da0: 41 54 push %r12 : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.17 : 4a0da2: 48 83 fa 17 cmp $0x17,%rdx : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 0.00 : 4a0da6: 49 89 fc mov %rdi,%r12 0.00 : 4a0da9: 55 push %rbp 3.37 : 4a0daa: 53 push %rbx : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.08 : 4a0dab: 76 73 jbe 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dad: 80 7c 16 eb 00 cmpb $0x0,-0x15(%rsi,%rdx,1) 3.48 : 4a0db2: 75 6c jne 4a0e20 <decode_tree_entry+0x80> : static const char *get_mode(const char *str, unsigned int *modep) : { : unsigned char c; : unsigned int mode = 0; : : if (*str == ' ') 1.94 : 4a0db4: 0f b6 06 movzbl (%rsi),%eax 0.39 : 4a0db7: 3c 20 cmp $0x20,%al 0.00 : 4a0db9: 74 65 je 4a0e20 <decode_tree_entry+0x80> : return NULL; : : while ((c = *str++) != ' ') { 0.06 : 4a0dbb: 89 c2 mov %eax,%edx : if (c < '0' || c > '7') 1.99 : 4a0dbd: 31 ed xor %ebp,%ebp : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 1.74 : 4a0dbf: 48 8d 5e 01 lea 0x1(%rsi),%rbx : if (c < '0' || c > '7') 0.00 : 4a0dc3: 8d 42 d0 lea -0x30(%rdx),%eax 0.17 : 4a0dc6: 3c 07 cmp $0x7,%al 0.00 : 4a0dc8: 76 0d jbe 4a0dd7 <decode_tree_entry+0x37> 0.00 : 4a0dca: eb 54 jmp 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dcc: 0f 1f 40 00 nopl 0x0(%rax) 16.57 : 4a0dd0: 8d 42 d0 lea -0x30(%rdx),%eax 0.14 : 4a0dd3: 3c 07 cmp $0x7,%al 0.00 : 4a0dd5: 77 49 ja 4a0e20 <decode_tree_entry+0x80> : return NULL; : mode = (mode << 3) + (c - '0'); 3.12 : 4a0dd7: 0f b6 c2 movzbl %dl,%eax : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 0.00 : 4a0dda: 0f b6 13 movzbl (%rbx),%edx 16.74 : 4a0ddd: 48 83 c3 01 add $0x1,%rbx : if (c < '0' || c > '7') : return NULL; : mode = (mode << 3) + (c - '0'); The first column is the percentage of samples that arrived on that particular line - relative to the total cost of the function. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 13:48:52 +00:00
self->start = start;
self->end = len ? start + len - 1 : start;
pr_debug3("%s: %s %#Lx-%#Lx\n", __func__, name, start, self->end);
perf_counter tools: Add 'perf annotate' feature Add new perf sub-command to display annotated source code: $ perf annotate decode_tree_entry ------------------------------------------------ Percent | Source code & Disassembly of /home/mingo/git/git ------------------------------------------------ : : /home/mingo/git/git: file format elf64-x86-64 : : : Disassembly of section .text: : : 00000000004a0da0 <decode_tree_entry>: : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 3.82 : 4a0da0: 41 54 push %r12 : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.17 : 4a0da2: 48 83 fa 17 cmp $0x17,%rdx : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 0.00 : 4a0da6: 49 89 fc mov %rdi,%r12 0.00 : 4a0da9: 55 push %rbp 3.37 : 4a0daa: 53 push %rbx : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.08 : 4a0dab: 76 73 jbe 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dad: 80 7c 16 eb 00 cmpb $0x0,-0x15(%rsi,%rdx,1) 3.48 : 4a0db2: 75 6c jne 4a0e20 <decode_tree_entry+0x80> : static const char *get_mode(const char *str, unsigned int *modep) : { : unsigned char c; : unsigned int mode = 0; : : if (*str == ' ') 1.94 : 4a0db4: 0f b6 06 movzbl (%rsi),%eax 0.39 : 4a0db7: 3c 20 cmp $0x20,%al 0.00 : 4a0db9: 74 65 je 4a0e20 <decode_tree_entry+0x80> : return NULL; : : while ((c = *str++) != ' ') { 0.06 : 4a0dbb: 89 c2 mov %eax,%edx : if (c < '0' || c > '7') 1.99 : 4a0dbd: 31 ed xor %ebp,%ebp : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 1.74 : 4a0dbf: 48 8d 5e 01 lea 0x1(%rsi),%rbx : if (c < '0' || c > '7') 0.00 : 4a0dc3: 8d 42 d0 lea -0x30(%rdx),%eax 0.17 : 4a0dc6: 3c 07 cmp $0x7,%al 0.00 : 4a0dc8: 76 0d jbe 4a0dd7 <decode_tree_entry+0x37> 0.00 : 4a0dca: eb 54 jmp 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dcc: 0f 1f 40 00 nopl 0x0(%rax) 16.57 : 4a0dd0: 8d 42 d0 lea -0x30(%rdx),%eax 0.14 : 4a0dd3: 3c 07 cmp $0x7,%al 0.00 : 4a0dd5: 77 49 ja 4a0e20 <decode_tree_entry+0x80> : return NULL; : mode = (mode << 3) + (c - '0'); 3.12 : 4a0dd7: 0f b6 c2 movzbl %dl,%eax : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 0.00 : 4a0dda: 0f b6 13 movzbl (%rbx),%edx 16.74 : 4a0ddd: 48 83 c3 01 add $0x1,%rbx : if (c < '0' || c > '7') : return NULL; : mode = (mode << 3) + (c - '0'); The first column is the percentage of samples that arrived on that particular line - relative to the total cost of the function. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 13:48:52 +00:00
memcpy(self->name, name, namelen);
return self;
}
static void symbol__delete(struct symbol *self)
{
free(((void *)self) - symbol__priv_size);
}
static size_t symbol__fprintf(struct symbol *self, FILE *fp)
{
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
return fprintf(fp, " %llx-%llx %s\n",
self->start, self->end, self->name);
}
struct dso *dso__new(const char *name)
{
struct dso *self = malloc(sizeof(*self) + strlen(name) + 1);
if (self != NULL) {
strcpy(self->name, name);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
self->long_name = self->name;
self->short_name = self->name;
self->syms = RB_ROOT;
self->find_symbol = dso__find_symbol;
perf report: Adjust column width to the values sampled Auto-adjust column width of perf report output to the longest occuring string length. Example: [acme@doppio pahole]$ perf report --sort comm,dso,symbol | head -13 12.79% pahole /usr/lib64/libdw-0.141.so [.] __libdw_find_attr 8.90% pahole /lib64/libc-2.10.1.so [.] _int_malloc 8.68% pahole /usr/lib64/libdw-0.141.so [.] __libdw_form_val_len 8.15% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp 6.80% pahole /lib64/libc-2.10.1.so [.] __tsearch 5.54% pahole ./build/libdwarves.so.1.0.0 [.] tag__recode_dwarf_type [acme@doppio pahole]$ [acme@doppio pahole]$ perf report --sort comm,dso,symbol -d /lib64/libc-2.10.1.so | head -10 21.92% pahole /lib64/libc-2.10.1.so [.] _int_malloc 20.08% pahole /lib64/libc-2.10.1.so [.] __GI_strcmp 16.75% pahole /lib64/libc-2.10.1.so [.] __tsearch [acme@doppio pahole]$ Also add these extra options to control the new behaviour: -w, --field-width Force each column width to the provided list, for large terminal readability. -t, --field-separator: Use a special separator character and don't pad with spaces, replacing all occurances of this separator in symbol names (and other output) with a '.' character, that thus it's the only non valid separator. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090711014728.GH3452@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-11 01:47:28 +00:00
self->slen_calculated = 0;
self->origin = DSO__ORIG_NOT_FOUND;
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
self->loaded = 0;
self->has_build_id = 0;
}
return self;
}
static void dso__delete_symbols(struct dso *self)
{
struct symbol *pos;
struct rb_node *next = rb_first(&self->syms);
while (next) {
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
rb_erase(&pos->rb_node, &self->syms);
symbol__delete(pos);
}
}
void dso__delete(struct dso *self)
{
dso__delete_symbols(self);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (self->long_name != self->name)
free(self->long_name);
free(self);
}
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
void dso__set_build_id(struct dso *self, void *build_id)
{
memcpy(self->build_id, build_id, sizeof(self->build_id));
self->has_build_id = 1;
}
static void dso__insert_symbol(struct dso *self, struct symbol *sym)
{
struct rb_node **p = &self->syms.rb_node;
struct rb_node *parent = NULL;
const u64 ip = sym->start;
struct symbol *s;
while (*p != NULL) {
parent = *p;
s = rb_entry(parent, struct symbol, rb_node);
if (ip < s->start)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
rb_link_node(&sym->rb_node, parent, p);
rb_insert_color(&sym->rb_node, &self->syms);
}
struct symbol *dso__find_symbol(struct dso *self, u64 ip)
{
struct rb_node *n;
if (self == NULL)
return NULL;
n = self->syms.rb_node;
while (n) {
struct symbol *s = rb_entry(n, struct symbol, rb_node);
if (ip < s->start)
n = n->rb_left;
else if (ip > s->end)
n = n->rb_right;
else
return s;
}
return NULL;
}
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
int build_id__sprintf(u8 *self, int len, char *bf)
{
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
char *bid = bf;
u8 *raw = self;
int i;
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
for (i = 0; i < len; ++i) {
sprintf(bid, "%02x", *raw);
++raw;
bid += 2;
}
return raw - self;
}
size_t dso__fprintf(struct dso *self, FILE *fp)
{
char sbuild_id[BUILD_ID_SIZE * 2 + 1];
struct rb_node *nd;
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
size_t ret;
build_id__sprintf(self->build_id, sizeof(self->build_id), sbuild_id);
ret = fprintf(fp, "dso: %s (%s)\n", self->short_name, sbuild_id);
for (nd = rb_first(&self->syms); nd; nd = rb_next(nd)) {
struct symbol *pos = rb_entry(nd, struct symbol, rb_node);
ret += symbol__fprintf(pos, fp);
}
return ret;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
/*
* Loads the function entries in /proc/kallsyms into kernel_map->dso,
* so that we can in the next step set the symbol ->end address and then
* call kernel_maps__split_kallsyms.
*/
static int kernel_maps__load_all_kallsyms(void)
{
char *line = NULL;
size_t n;
FILE *file = fopen("/proc/kallsyms", "r");
if (file == NULL)
goto out_failure;
while (!feof(file)) {
u64 start;
struct symbol *sym;
int line_len, len;
char symbol_type;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
char *symbol_name;
line_len = getline(&line, &n, file);
if (line_len < 0)
break;
if (!line)
goto out_failure;
line[--line_len] = '\0'; /* \n */
len = hex2u64(line, &start);
len++;
if (len + 2 >= line_len)
continue;
symbol_type = toupper(line[len]);
/*
* We're interested only in code ('T'ext)
*/
if (symbol_type != 'T' && symbol_type != 'W')
continue;
symbol_name = line + len + 2;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
/*
* Will fix up the end later, when we have all symbols sorted.
*/
sym = symbol__new(start, 0, symbol_name);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
if (sym == NULL)
goto out_delete_line;
dso__insert_symbol(kernel_map->dso, sym);
}
free(line);
fclose(file);
return 0;
out_delete_line:
free(line);
out_failure:
return -1;
}
/*
* Split the symbols into maps, making sure there are no overlaps, i.e. the
* kernel range is broken in several maps, named [kernel].N, as we don't have
* the original ELF section names vmlinux have.
*/
static int kernel_maps__split_kallsyms(symbol_filter_t filter, int use_modules)
{
struct map *map = kernel_map;
struct symbol *pos;
int count = 0;
struct rb_node *next = rb_first(&kernel_map->dso->syms);
int kernel_range = 0;
while (next) {
char *module;
pos = rb_entry(next, struct symbol, rb_node);
next = rb_next(&pos->rb_node);
module = strchr(pos->name, '\t');
if (module) {
if (!use_modules)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
goto delete_symbol;
*module++ = '\0';
if (strcmp(map->dso->name, module)) {
map = kernel_maps__find_by_dso_name(module);
if (!map) {
pr_err("/proc/{kallsyms,modules} "
"inconsistency!\n");
return -1;
}
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
/*
* So that we look just like we get from .ko files,
* i.e. not prelinked, relative to map->start.
*/
pos->start = map->map_ip(map, pos->start);
pos->end = map->map_ip(map, pos->end);
} else if (map != kernel_map) {
char dso_name[PATH_MAX];
struct dso *dso;
snprintf(dso_name, sizeof(dso_name), "[kernel].%d",
kernel_range++);
dso = dso__new(dso_name);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
if (dso == NULL)
return -1;
map = map__new2(pos->start, dso);
if (map == NULL) {
dso__delete(dso);
return -1;
}
map->map_ip = map->unmap_ip = identity__map_ip;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
kernel_maps__insert(map);
++kernel_range;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
if (filter && filter(map, pos)) {
delete_symbol:
rb_erase(&pos->rb_node, &kernel_map->dso->syms);
symbol__delete(pos);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
} else {
if (map != kernel_map) {
rb_erase(&pos->rb_node, &kernel_map->dso->syms);
dso__insert_symbol(map->dso, pos);
}
count++;
}
}
return count;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
static int kernel_maps__load_kallsyms(symbol_filter_t filter, int use_modules)
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
{
if (kernel_maps__load_all_kallsyms())
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
return -1;
dso__fixup_sym_end(kernel_map->dso);
return kernel_maps__split_kallsyms(filter, use_modules);
}
static size_t kernel_maps__fprintf(FILE *fp)
{
size_t printed = fprintf(fp, "Kernel maps:\n");
struct rb_node *nd;
for (nd = rb_first(&kernel_maps); nd; nd = rb_next(nd)) {
struct map *pos = rb_entry(nd, struct map, rb_node);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
printed += fprintf(fp, "Map:");
printed += map__fprintf(pos, fp);
if (verbose > 1) {
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
printed += dso__fprintf(pos->dso, fp);
printed += fprintf(fp, "--\n");
}
}
return printed + fprintf(fp, "END kernel maps\n");
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
static int dso__load_perf_map(struct dso *self, struct map *map,
symbol_filter_t filter)
{
char *line = NULL;
size_t n;
FILE *file;
int nr_syms = 0;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
file = fopen(self->long_name, "r");
if (file == NULL)
goto out_failure;
while (!feof(file)) {
u64 start, size;
struct symbol *sym;
int line_len, len;
line_len = getline(&line, &n, file);
if (line_len < 0)
break;
if (!line)
goto out_failure;
line[--line_len] = '\0'; /* \n */
len = hex2u64(line, &start);
len++;
if (len + 2 >= line_len)
continue;
len += hex2u64(line + len, &size);
len++;
if (len + 2 >= line_len)
continue;
sym = symbol__new(start, size, line + len);
if (sym == NULL)
goto out_delete_line;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (filter && filter(map, sym))
symbol__delete(sym);
else {
dso__insert_symbol(self, sym);
nr_syms++;
}
}
free(line);
fclose(file);
return nr_syms;
out_delete_line:
free(line);
out_failure:
return -1;
}
/**
* elf_symtab__for_each_symbol - iterate thru all the symbols
*
* @self: struct elf_symtab instance to iterate
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
* @idx: uint32_t idx
* @sym: GElf_Sym iterator
*/
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
#define elf_symtab__for_each_symbol(syms, nr_syms, idx, sym) \
for (idx = 0, gelf_getsym(syms, idx, &sym);\
idx < nr_syms; \
idx++, gelf_getsym(syms, idx, &sym))
static inline uint8_t elf_sym__type(const GElf_Sym *sym)
{
return GELF_ST_TYPE(sym->st_info);
}
static inline int elf_sym__is_function(const GElf_Sym *sym)
{
return elf_sym__type(sym) == STT_FUNC &&
sym->st_name != 0 &&
sym->st_shndx != SHN_UNDEF;
}
static inline int elf_sym__is_label(const GElf_Sym *sym)
{
return elf_sym__type(sym) == STT_NOTYPE &&
sym->st_name != 0 &&
sym->st_shndx != SHN_UNDEF &&
sym->st_shndx != SHN_ABS;
}
static inline const char *elf_sec__name(const GElf_Shdr *shdr,
const Elf_Data *secstrs)
{
return secstrs->d_buf + shdr->sh_name;
}
static inline int elf_sec__is_text(const GElf_Shdr *shdr,
const Elf_Data *secstrs)
{
return strstr(elf_sec__name(shdr, secstrs), "text") != NULL;
}
static inline const char *elf_sym__name(const GElf_Sym *sym,
const Elf_Data *symstrs)
{
return symstrs->d_buf + sym->st_name;
}
static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep,
GElf_Shdr *shp, const char *name,
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
size_t *idx)
{
Elf_Scn *sec = NULL;
size_t cnt = 1;
while ((sec = elf_nextscn(elf, sec)) != NULL) {
char *str;
gelf_getshdr(sec, shp);
str = elf_strptr(elf, ep->e_shstrndx, shp->sh_name);
if (!strcmp(name, str)) {
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
if (idx)
*idx = cnt;
break;
}
++cnt;
}
return sec;
}
#define elf_section__for_each_rel(reldata, pos, pos_mem, idx, nr_entries) \
for (idx = 0, pos = gelf_getrel(reldata, 0, &pos_mem); \
idx < nr_entries; \
++idx, pos = gelf_getrel(reldata, idx, &pos_mem))
#define elf_section__for_each_rela(reldata, pos, pos_mem, idx, nr_entries) \
for (idx = 0, pos = gelf_getrela(reldata, 0, &pos_mem); \
idx < nr_entries; \
++idx, pos = gelf_getrela(reldata, idx, &pos_mem))
/*
* We need to check if we have a .dynsym, so that we can handle the
* .plt, synthesizing its symbols, that aren't on the symtabs (be it
* .dynsym or .symtab).
* And always look at the original dso, not at debuginfo packages, that
* have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS).
*/
static int dso__synthesize_plt_symbols(struct dso *self)
{
uint32_t nr_rel_entries, idx;
GElf_Sym sym;
u64 plt_offset;
GElf_Shdr shdr_plt;
struct symbol *f;
GElf_Shdr shdr_rel_plt, shdr_dynsym;
Elf_Data *reldata, *syms, *symstrs;
Elf_Scn *scn_plt_rel, *scn_symstrs, *scn_dynsym;
size_t dynsym_idx;
GElf_Ehdr ehdr;
char sympltname[1024];
Elf *elf;
int nr = 0, symidx, fd, err = 0;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
fd = open(self->long_name, O_RDONLY);
if (fd < 0)
goto out;
elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
if (elf == NULL)
goto out_close;
if (gelf_getehdr(elf, &ehdr) == NULL)
goto out_elf_end;
scn_dynsym = elf_section_by_name(elf, &ehdr, &shdr_dynsym,
".dynsym", &dynsym_idx);
if (scn_dynsym == NULL)
goto out_elf_end;
scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
".rela.plt", NULL);
if (scn_plt_rel == NULL) {
scn_plt_rel = elf_section_by_name(elf, &ehdr, &shdr_rel_plt,
".rel.plt", NULL);
if (scn_plt_rel == NULL)
goto out_elf_end;
}
err = -1;
if (shdr_rel_plt.sh_link != dynsym_idx)
goto out_elf_end;
if (elf_section_by_name(elf, &ehdr, &shdr_plt, ".plt", NULL) == NULL)
goto out_elf_end;
/*
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
* Fetch the relocation section to find the idxes to the GOT
* and the symbols in the .dynsym they refer to.
*/
reldata = elf_getdata(scn_plt_rel, NULL);
if (reldata == NULL)
goto out_elf_end;
syms = elf_getdata(scn_dynsym, NULL);
if (syms == NULL)
goto out_elf_end;
scn_symstrs = elf_getscn(elf, shdr_dynsym.sh_link);
if (scn_symstrs == NULL)
goto out_elf_end;
symstrs = elf_getdata(scn_symstrs, NULL);
if (symstrs == NULL)
goto out_elf_end;
nr_rel_entries = shdr_rel_plt.sh_size / shdr_rel_plt.sh_entsize;
plt_offset = shdr_plt.sh_offset;
if (shdr_rel_plt.sh_type == SHT_RELA) {
GElf_Rela pos_mem, *pos;
elf_section__for_each_rela(reldata, pos, pos_mem, idx,
nr_rel_entries) {
symidx = GELF_R_SYM(pos->r_info);
plt_offset += shdr_plt.sh_entsize;
gelf_getsym(syms, symidx, &sym);
snprintf(sympltname, sizeof(sympltname),
"%s@plt", elf_sym__name(&sym, symstrs));
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
sympltname);
if (!f)
goto out_elf_end;
dso__insert_symbol(self, f);
++nr;
}
} else if (shdr_rel_plt.sh_type == SHT_REL) {
GElf_Rel pos_mem, *pos;
elf_section__for_each_rel(reldata, pos, pos_mem, idx,
nr_rel_entries) {
symidx = GELF_R_SYM(pos->r_info);
plt_offset += shdr_plt.sh_entsize;
gelf_getsym(syms, symidx, &sym);
snprintf(sympltname, sizeof(sympltname),
"%s@plt", elf_sym__name(&sym, symstrs));
f = symbol__new(plt_offset, shdr_plt.sh_entsize,
sympltname);
if (!f)
goto out_elf_end;
dso__insert_symbol(self, f);
++nr;
}
}
err = 0;
out_elf_end:
elf_end(elf);
out_close:
close(fd);
if (err == 0)
return nr;
out:
pr_warning("%s: problems reading %s PLT info.\n",
__func__, self->long_name);
return 0;
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
static int dso__load_sym(struct dso *self, struct map *map, const char *name,
int fd, symbol_filter_t filter, int kernel,
int kmodule)
{
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
struct map *curr_map = map;
struct dso *curr_dso = self;
size_t dso_name_len = strlen(self->short_name);
Elf_Data *symstrs, *secstrs;
uint32_t nr_syms;
int err = -1;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
uint32_t idx;
GElf_Ehdr ehdr;
GElf_Shdr shdr;
Elf_Data *syms;
GElf_Sym sym;
Elf_Scn *sec, *sec_strndx;
Elf *elf;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
int nr = 0;
elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
if (elf == NULL) {
pr_err("%s: cannot read %s ELF file.\n", __func__, name);
goto out_close;
}
if (gelf_getehdr(elf, &ehdr) == NULL) {
pr_err("%s: cannot get elf header.\n", __func__);
goto out_elf_end;
}
sec = elf_section_by_name(elf, &ehdr, &shdr, ".symtab", NULL);
if (sec == NULL) {
sec = elf_section_by_name(elf, &ehdr, &shdr, ".dynsym", NULL);
if (sec == NULL)
goto out_elf_end;
}
syms = elf_getdata(sec, NULL);
if (syms == NULL)
goto out_elf_end;
sec = elf_getscn(elf, shdr.sh_link);
if (sec == NULL)
goto out_elf_end;
symstrs = elf_getdata(sec, NULL);
if (symstrs == NULL)
goto out_elf_end;
sec_strndx = elf_getscn(elf, ehdr.e_shstrndx);
if (sec_strndx == NULL)
goto out_elf_end;
secstrs = elf_getdata(sec_strndx, NULL);
if (secstrs == NULL)
goto out_elf_end;
nr_syms = shdr.sh_size / shdr.sh_entsize;
memset(&sym, 0, sizeof(sym));
if (!kernel) {
self->adjust_symbols = (ehdr.e_type == ET_EXEC ||
perf_counter tools: Adjust symbols in ET_EXEC files too Ingo Molnar wrote: > i just bisected a 'perf report' bug that would cause us to not > resolve all user-space symbols in a 'git gc' run to: > > f5812a7a336fb952d819e4427b9a2dce02368e82 is first bad commit > commit f5812a7a336fb952d819e4427b9a2dce02368e82 > Author: Arnaldo Carvalho de Melo <acme@redhat.com> > Date: Tue Jun 30 11:43:17 2009 -0300 > > perf_counter tools: Adjust only prelinked symbol's addresses Rename ->prelinked to ->adjust_symbols and making what was done only for prelinked libraries also to ET_EXEC binaries, such as /usr/bin/git: [acme@doppio pahole]$ readelf -h /usr/bin/git | grep Type Type: EXEC (Executable file) [acme@doppio pahole]$ And after installing the 'git-debuginfo' package, I get correct results: [acme@doppio linux-2.6-tip]$ perf report --sort comm,dso,symbol -d /usr/bin/git | head -20 # # (1139614 samples) # # Overhead Command Shared Object Symbol # ........ ................ ......................... ...... # 34.98% git /usr/bin/git [.] send_sideband 33.39% git /usr/bin/git [.] enter_repo 6.81% git /usr/bin/git [.] diff_opt_parse 4.95% git /usr/bin/git [.] is_repository_shallow 3.24% git /usr/bin/git [.] odb_mkstemp 1.39% git /usr/bin/git [.] output 1.34% git /usr/bin/git [.] xmmap 1.25% git /usr/bin/git [.] receive_pack_config 1.16% git /usr/bin/git [.] git_pathdup 0.90% git /usr/bin/git [.] read_object_with_reference 0.86% git /usr/bin/git [.] show_patch_diff 0.85% git /usr/bin/git 0x00000000095e2e 0.69% git /usr/bin/git [.] display [acme@doppio linux-2.6-tip]$ I'll check what are the last cases where we can't resolve symbols, like this 0x00000000095e2e later. And I guess this will fix the problems Mike were seeing too: [acme@doppio linux-2.6-tip]$ readelf -h ../build/perf/vmlinux | grep Type Type: EXEC (Executable file) [acme@doppio linux-2.6-tip]$ Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-03 00:24:14 +00:00
elf_section_by_name(elf, &ehdr, &shdr,
".gnu.prelink_undo",
NULL) != NULL);
} else self->adjust_symbols = 0;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
elf_symtab__for_each_symbol(syms, nr_syms, idx, sym) {
struct symbol *f;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
const char *elf_name;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
char *demangled = NULL;
int is_label = elf_sym__is_label(&sym);
const char *section_name;
if (!is_label && !elf_sym__is_function(&sym))
continue;
sec = elf_getscn(elf, sym.st_shndx);
if (!sec)
goto out_elf_end;
gelf_getshdr(sec, &shdr);
if (is_label && !elf_sec__is_text(&shdr, secstrs))
continue;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
elf_name = elf_sym__name(&sym, symstrs);
section_name = elf_sec__name(&shdr, secstrs);
perf_counter tools: Add 'perf annotate' feature Add new perf sub-command to display annotated source code: $ perf annotate decode_tree_entry ------------------------------------------------ Percent | Source code & Disassembly of /home/mingo/git/git ------------------------------------------------ : : /home/mingo/git/git: file format elf64-x86-64 : : : Disassembly of section .text: : : 00000000004a0da0 <decode_tree_entry>: : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 3.82 : 4a0da0: 41 54 push %r12 : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.17 : 4a0da2: 48 83 fa 17 cmp $0x17,%rdx : *modep = mode; : return str; : } : : static void decode_tree_entry(struct tree_desc *desc, const char *buf, unsigned long size) : { 0.00 : 4a0da6: 49 89 fc mov %rdi,%r12 0.00 : 4a0da9: 55 push %rbp 3.37 : 4a0daa: 53 push %rbx : const char *path; : unsigned int mode, len; : : if (size < 24 || buf[size - 21]) 0.08 : 4a0dab: 76 73 jbe 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dad: 80 7c 16 eb 00 cmpb $0x0,-0x15(%rsi,%rdx,1) 3.48 : 4a0db2: 75 6c jne 4a0e20 <decode_tree_entry+0x80> : static const char *get_mode(const char *str, unsigned int *modep) : { : unsigned char c; : unsigned int mode = 0; : : if (*str == ' ') 1.94 : 4a0db4: 0f b6 06 movzbl (%rsi),%eax 0.39 : 4a0db7: 3c 20 cmp $0x20,%al 0.00 : 4a0db9: 74 65 je 4a0e20 <decode_tree_entry+0x80> : return NULL; : : while ((c = *str++) != ' ') { 0.06 : 4a0dbb: 89 c2 mov %eax,%edx : if (c < '0' || c > '7') 1.99 : 4a0dbd: 31 ed xor %ebp,%ebp : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 1.74 : 4a0dbf: 48 8d 5e 01 lea 0x1(%rsi),%rbx : if (c < '0' || c > '7') 0.00 : 4a0dc3: 8d 42 d0 lea -0x30(%rdx),%eax 0.17 : 4a0dc6: 3c 07 cmp $0x7,%al 0.00 : 4a0dc8: 76 0d jbe 4a0dd7 <decode_tree_entry+0x37> 0.00 : 4a0dca: eb 54 jmp 4a0e20 <decode_tree_entry+0x80> 0.00 : 4a0dcc: 0f 1f 40 00 nopl 0x0(%rax) 16.57 : 4a0dd0: 8d 42 d0 lea -0x30(%rdx),%eax 0.14 : 4a0dd3: 3c 07 cmp $0x7,%al 0.00 : 4a0dd5: 77 49 ja 4a0e20 <decode_tree_entry+0x80> : return NULL; : mode = (mode << 3) + (c - '0'); 3.12 : 4a0dd7: 0f b6 c2 movzbl %dl,%eax : unsigned int mode = 0; : : if (*str == ' ') : return NULL; : : while ((c = *str++) != ' ') { 0.00 : 4a0dda: 0f b6 13 movzbl (%rbx),%edx 16.74 : 4a0ddd: 48 83 c3 01 add $0x1,%rbx : if (c < '0' || c > '7') : return NULL; : mode = (mode << 3) + (c - '0'); The first column is the percentage of samples that arrived on that particular line - relative to the total cost of the function. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-06 13:48:52 +00:00
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
if (kernel || kmodule) {
char dso_name[PATH_MAX];
if (strcmp(section_name,
curr_dso->short_name + dso_name_len) == 0)
goto new_symbol;
if (strcmp(section_name, ".text") == 0) {
curr_map = map;
curr_dso = self;
goto new_symbol;
}
snprintf(dso_name, sizeof(dso_name),
"%s%s", self->short_name, section_name);
curr_map = kernel_maps__find_by_dso_name(dso_name);
if (curr_map == NULL) {
u64 start = sym.st_value;
if (kmodule)
start += map->start + shdr.sh_offset;
curr_dso = dso__new(dso_name);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
if (curr_dso == NULL)
goto out_elf_end;
curr_map = map__new2(start, curr_dso);
if (curr_map == NULL) {
dso__delete(curr_dso);
goto out_elf_end;
}
curr_map->map_ip = identity__map_ip;
curr_map->unmap_ip = identity__map_ip;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
curr_dso->origin = DSO__ORIG_KERNEL;
kernel_maps__insert(curr_map);
dsos__add(curr_dso);
} else
curr_dso = curr_map->dso;
goto new_symbol;
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
if (curr_dso->adjust_symbols) {
pr_debug2("adjusting symbol: st_value: %Lx sh_addr: "
"%Lx sh_offset: %Lx\n", (u64)sym.st_value,
(u64)shdr.sh_addr, (u64)shdr.sh_offset);
sym.st_value -= shdr.sh_addr - shdr.sh_offset;
}
/*
* We need to figure out if the object was created from C++ sources
* DWARF DW_compile_unit has this, but we don't always have access
* to it...
*/
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
demangled = bfd_demangle(NULL, elf_name, DMGL_PARAMS | DMGL_ANSI);
if (demangled != NULL)
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
elf_name = demangled;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
new_symbol:
f = symbol__new(sym.st_value, sym.st_size, elf_name);
free(demangled);
if (!f)
goto out_elf_end;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
if (filter && filter(curr_map, f))
symbol__delete(f);
else {
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
dso__insert_symbol(curr_dso, f);
nr++;
}
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
/*
* For misannotated, zeroed, ASM function sizes.
*/
if (nr > 0)
dso__fixup_sym_end(self);
err = nr;
out_elf_end:
elf_end(elf);
out_close:
return err;
}
bool fetch_build_id_table(struct list_head *head)
{
bool have_buildid = false;
struct dso *pos;
list_for_each_entry(pos, &dsos, node) {
struct build_id_list *new;
struct build_id_event b;
size_t len;
if (filename__read_build_id(pos->long_name,
&b.build_id,
sizeof(b.build_id)) < 0)
continue;
have_buildid = true;
memset(&b.header, 0, sizeof(b.header));
len = strlen(pos->long_name) + 1;
len = ALIGN(len, 64);
b.header.size = sizeof(b) + len;
new = malloc(sizeof(*new));
if (!new)
die("No memory\n");
memcpy(&new->event, &b, sizeof(b));
new->dso_name = pos->long_name;
new->len = len;
list_add_tail(&new->list, head);
}
return have_buildid;
}
int filename__read_build_id(const char *filename, void *bf, size_t size)
2009-08-05 22:02:49 +00:00
{
int fd, err = -1;
2009-08-05 22:02:49 +00:00
GElf_Ehdr ehdr;
GElf_Shdr shdr;
Elf_Data *build_id_data;
Elf_Scn *sec;
Elf *elf;
if (size < BUILD_ID_SIZE)
goto out;
fd = open(filename, O_RDONLY);
2009-08-05 22:02:49 +00:00
if (fd < 0)
goto out;
elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
2009-08-05 22:02:49 +00:00
if (elf == NULL) {
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
pr_debug2("%s: cannot read %s ELF file.\n", __func__, filename);
2009-08-05 22:02:49 +00:00
goto out_close;
}
if (gelf_getehdr(elf, &ehdr) == NULL) {
pr_err("%s: cannot get elf header.\n", __func__);
2009-08-05 22:02:49 +00:00
goto out_elf_end;
}
sec = elf_section_by_name(elf, &ehdr, &shdr,
".note.gnu.build-id", NULL);
2009-08-05 22:02:49 +00:00
if (sec == NULL)
goto out_elf_end;
build_id_data = elf_getdata(sec, NULL);
if (build_id_data == NULL)
goto out_elf_end;
memcpy(bf, build_id_data->d_buf + 16, BUILD_ID_SIZE);
err = BUILD_ID_SIZE;
out_elf_end:
elf_end(elf);
out_close:
close(fd);
out:
return err;
}
static char *dso__read_build_id(struct dso *self)
{
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
int len;
char *build_id = NULL;
unsigned char rawbf[BUILD_ID_SIZE];
len = filename__read_build_id(self->long_name, rawbf, sizeof(rawbf));
if (len < 0)
goto out;
build_id = malloc(len * 2 + 1);
2009-08-05 22:02:49 +00:00
if (build_id == NULL)
goto out;
2009-08-05 22:02:49 +00:00
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
build_id__sprintf(rawbf, len, build_id);
2009-08-05 22:02:49 +00:00
out:
return build_id;
}
char dso__symtab_origin(const struct dso *self)
{
static const char origin[] = {
[DSO__ORIG_KERNEL] = 'k',
[DSO__ORIG_JAVA_JIT] = 'j',
[DSO__ORIG_FEDORA] = 'f',
[DSO__ORIG_UBUNTU] = 'u',
[DSO__ORIG_BUILDID] = 'b',
[DSO__ORIG_DSO] = 'd',
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
[DSO__ORIG_KMODULE] = 'K',
};
if (self == NULL || self->origin == DSO__ORIG_NOT_FOUND)
return '!';
return origin[self->origin];
}
int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
{
2009-08-05 22:02:49 +00:00
int size = PATH_MAX;
char *name = malloc(size), *build_id = NULL;
int ret = -1;
int fd;
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
self->loaded = 1;
if (!name)
return -1;
perf_counter tools: Adjust symbols in ET_EXEC files too Ingo Molnar wrote: > i just bisected a 'perf report' bug that would cause us to not > resolve all user-space symbols in a 'git gc' run to: > > f5812a7a336fb952d819e4427b9a2dce02368e82 is first bad commit > commit f5812a7a336fb952d819e4427b9a2dce02368e82 > Author: Arnaldo Carvalho de Melo <acme@redhat.com> > Date: Tue Jun 30 11:43:17 2009 -0300 > > perf_counter tools: Adjust only prelinked symbol's addresses Rename ->prelinked to ->adjust_symbols and making what was done only for prelinked libraries also to ET_EXEC binaries, such as /usr/bin/git: [acme@doppio pahole]$ readelf -h /usr/bin/git | grep Type Type: EXEC (Executable file) [acme@doppio pahole]$ And after installing the 'git-debuginfo' package, I get correct results: [acme@doppio linux-2.6-tip]$ perf report --sort comm,dso,symbol -d /usr/bin/git | head -20 # # (1139614 samples) # # Overhead Command Shared Object Symbol # ........ ................ ......................... ...... # 34.98% git /usr/bin/git [.] send_sideband 33.39% git /usr/bin/git [.] enter_repo 6.81% git /usr/bin/git [.] diff_opt_parse 4.95% git /usr/bin/git [.] is_repository_shallow 3.24% git /usr/bin/git [.] odb_mkstemp 1.39% git /usr/bin/git [.] output 1.34% git /usr/bin/git [.] xmmap 1.25% git /usr/bin/git [.] receive_pack_config 1.16% git /usr/bin/git [.] git_pathdup 0.90% git /usr/bin/git [.] read_object_with_reference 0.86% git /usr/bin/git [.] show_patch_diff 0.85% git /usr/bin/git 0x00000000095e2e 0.69% git /usr/bin/git [.] display [acme@doppio linux-2.6-tip]$ I'll check what are the last cases where we can't resolve symbols, like this 0x00000000095e2e later. And I guess this will fix the problems Mike were seeing too: [acme@doppio linux-2.6-tip]$ readelf -h ../build/perf/vmlinux | grep Type Type: EXEC (Executable file) [acme@doppio linux-2.6-tip]$ Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-03 00:24:14 +00:00
self->adjust_symbols = 0;
if (strncmp(self->name, "/tmp/perf-", 10) == 0) {
ret = dso__load_perf_map(self, map, filter);
self->origin = ret > 0 ? DSO__ORIG_JAVA_JIT :
DSO__ORIG_NOT_FOUND;
return ret;
}
self->origin = DSO__ORIG_FEDORA - 1;
more:
do {
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
int berr = 0;
self->origin++;
switch (self->origin) {
case DSO__ORIG_FEDORA:
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
snprintf(name, size, "/usr/lib/debug%s.debug",
self->long_name);
break;
case DSO__ORIG_UBUNTU:
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
snprintf(name, size, "/usr/lib/debug%s",
self->long_name);
break;
case DSO__ORIG_BUILDID:
build_id = dso__read_build_id(self);
2009-08-05 22:02:49 +00:00
if (build_id != NULL) {
snprintf(name, size,
"/usr/lib/debug/.build-id/%.2s/%s.debug",
build_id, build_id + 2);
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
goto compare_build_id;
2009-08-05 22:02:49 +00:00
}
self->origin++;
2009-08-05 22:02:49 +00:00
/* Fall thru */
case DSO__ORIG_DSO:
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
snprintf(name, size, "%s", self->long_name);
break;
default:
goto out;
}
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
if (self->has_build_id) {
bool match;
build_id = malloc(BUILD_ID_SIZE);
if (build_id == NULL)
goto more;
berr = filename__read_build_id(name, build_id,
BUILD_ID_SIZE);
compare_build_id:
match = berr > 0 && memcmp(build_id, self->build_id,
sizeof(self->build_id)) == 0;
free(build_id);
build_id = NULL;
if (!match)
goto more;
}
fd = open(name, O_RDONLY);
} while (fd < 0);
ret = dso__load_sym(self, map, name, fd, filter, 0, 0);
close(fd);
/*
* Some people seem to have debuginfo files _WITHOUT_ debug info!?!?
*/
if (!ret)
goto more;
if (ret > 0) {
int nr_plt = dso__synthesize_plt_symbols(self);
if (nr_plt > 0)
ret += nr_plt;
}
out:
free(name);
perf tools: Fix dso__new handle() to handle deleted DSOs It is better than showing the map addr, this way at least we know that we can't get the symtabs because the DSO was deleted (system update) while an app still used such DSO. Yeah, don't do that, but if you do, you'll figure it out quicker this way. [acme@doppio linux-2.6-tip]$ perf report | head -15 # Samples: 3796 # # Overhead Command Shared Object Symbol # ........ ....... ................................................................... ...... # 23.55% pidgin /lib64/libglib-2.0.so.0.2000.4.#prelink#.Pd98lu (deleted) [.] 0x00000000038844 21.55% pidgin /lib64/libpthread-2.10.1.so.#prelink#.AFwK8Q (deleted) [.] 0x0000000000a42d 10.85% pidgin [kernel] [.] vread_hpet 7.85% pidgin /lib64/libgobject-2.0.so.0.2000.4.#prelink#.o1vpU7 (deleted) [.] 0x00000000014de8 3.35% pidgin /lib64/libc-2.10.1.so (deleted) [.] 0x0000000007a875 3.19% pidgin /lib64/libdbus-1.so.3.4.0.#prelink#.6mwgZP (deleted) [.] 0x0000000001d254 3.06% pidgin /usr/lib64/libgtk-x11-2.0.so.0.1600.5.#prelink#.511hAl (deleted) [.] 0x000000002334e7 2.90% pidgin /usr/lib64/libgdk-x11-2.0.so.0.1600.5.#prelink#.5qlMo1 (deleted) [.] 0x00000000037b2d 1.84% pidgin [kernel] [k] do_sys_poll 1.45% pidgin /usr/lib64/libX11.so.6.2.0.#prelink#.iR59Rx (deleted) [.] 0x0000000004c751 [acme@doppio linux-2.6-tip]$ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Luis Claudio R. Gonçalves <lclaudio@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090811200436.GA3478@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11 20:04:36 +00:00
if (ret < 0 && strstr(self->name, " (deleted)") != NULL)
return 0;
return ret;
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
struct map *kernel_map;
static void kernel_maps__insert(struct map *map)
{
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
maps__insert(&kernel_maps, map);
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
struct symbol *kernel_maps__find_symbol(u64 ip, struct map **mapp)
{
struct map *map = maps__find(&kernel_maps, ip);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
if (mapp)
*mapp = map;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (map) {
ip = map->map_ip(map, ip);
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
return map->dso->find_symbol(map->dso, ip);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
}
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
return NULL;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
}
struct map *kernel_maps__find_by_dso_name(const char *name)
{
struct rb_node *nd;
for (nd = rb_first(&kernel_maps); nd; nd = rb_next(nd)) {
struct map *map = rb_entry(nd, struct map, rb_node);
if (map->dso && strcmp(map->dso->name, name) == 0)
return map;
}
return NULL;
}
static int dso__load_module_sym(struct dso *self, struct map *map,
symbol_filter_t filter)
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
{
int err = 0, fd = open(self->long_name, O_RDONLY);
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
self->loaded = 1;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (fd < 0) {
pr_err("%s: cannot open %s\n", __func__, self->long_name);
return err;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
}
err = dso__load_sym(self, map, self->long_name, fd, filter, 0, 1);
close(fd);
return err;
}
static int dsos__load_modules_sym_dir(char *dirname, symbol_filter_t filter)
{
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
struct dirent *dent;
int nr_symbols = 0, err;
DIR *dir = opendir(dirname);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (!dir) {
pr_err("%s: cannot open %s dir\n", __func__, dirname);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
return -1;
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
while ((dent = readdir(dir)) != NULL) {
char path[PATH_MAX];
if (dent->d_type == DT_DIR) {
if (!strcmp(dent->d_name, ".") ||
!strcmp(dent->d_name, ".."))
continue;
snprintf(path, sizeof(path), "%s/%s",
dirname, dent->d_name);
err = dsos__load_modules_sym_dir(path, filter);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (err < 0)
goto failure;
} else {
char *dot = strrchr(dent->d_name, '.'),
dso_name[PATH_MAX];
struct map *map;
struct rb_node *last;
if (dot == NULL || strcmp(dot, ".ko"))
continue;
snprintf(dso_name, sizeof(dso_name), "[%.*s]",
(int)(dot - dent->d_name), dent->d_name);
strxfrchar(dso_name, '-', '_');
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
map = kernel_maps__find_by_dso_name(dso_name);
if (map == NULL)
continue;
snprintf(path, sizeof(path), "%s/%s",
dirname, dent->d_name);
map->dso->long_name = strdup(path);
if (map->dso->long_name == NULL)
goto failure;
err = dso__load_module_sym(map->dso, map, filter);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (err < 0)
goto failure;
last = rb_last(&map->dso->syms);
if (last) {
struct symbol *sym;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
/*
* We do this here as well, even having the
* symbol size found in the symtab because
* misannotated ASM symbols may have the size
* set to zero.
*/
dso__fixup_sym_end(map->dso);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
sym = rb_entry(last, struct symbol, rb_node);
map->end = map->start + sym->end;
}
}
nr_symbols += err;
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
return nr_symbols;
failure:
closedir(dir);
return -1;
}
static int dsos__load_modules_sym(symbol_filter_t filter)
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
{
struct utsname uts;
char modules_path[PATH_MAX];
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (uname(&uts) < 0)
return -1;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
snprintf(modules_path, sizeof(modules_path), "/lib/modules/%s/kernel",
uts.release);
return dsos__load_modules_sym_dir(modules_path, filter);
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
/*
* Constructor variant for modules (where we know from /proc/modules where
* they are loaded) and for vmlinux, where only after we load all the
* symbols we'll know where it starts and ends.
*/
static struct map *map__new2(u64 start, struct dso *dso)
{
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
struct map *self = malloc(sizeof(*self));
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (self != NULL) {
/*
* ->end will be filled after we load all the symbols
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
*/
map__init(self, start, 0, 0, dso);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
return self;
}
static int dsos__load_modules(void)
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
{
char *line = NULL;
size_t n;
FILE *file = fopen("/proc/modules", "r");
struct map *map;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (file == NULL)
return -1;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
while (!feof(file)) {
char name[PATH_MAX];
u64 start;
struct dso *dso;
char *sep;
int line_len;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
line_len = getline(&line, &n, file);
if (line_len < 0)
break;
if (!line)
goto out_failure;
line[--line_len] = '\0'; /* \n */
sep = strrchr(line, 'x');
if (sep == NULL)
continue;
hex2u64(sep + 1, &start);
sep = strchr(line, ' ');
if (sep == NULL)
continue;
*sep = '\0';
snprintf(name, sizeof(name), "[%s]", line);
dso = dso__new(name);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (dso == NULL)
goto out_delete_line;
map = map__new2(start, dso);
if (map == NULL) {
dso__delete(dso);
goto out_delete_line;
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
dso->origin = DSO__ORIG_KMODULE;
kernel_maps__insert(map);
dsos__add(dso);
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
free(line);
fclose(file);
return 0;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
out_delete_line:
free(line);
out_failure:
return -1;
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
static int dso__load_vmlinux(struct dso *self, struct map *map,
const char *vmlinux, symbol_filter_t filter)
{
int err, fd = open(vmlinux, O_RDONLY);
perf symbols: Use the buildids if present With this change 'perf record' will intercept PERF_RECORD_MMAP calls, creating a linked list of DSOs, then when the session finishes, it will traverse this list and read the buildids, stashing them at the end of the file and will set up a new feature bit in the header bitmask. 'perf report' will then notice this feature and populate the 'dsos' list and set the build ids. When reading the symtabs it will refuse to load from a file that doesn't have the same build id. This improves the reliability of the profiler output, as symbols and profiling data is more guaranteed to match. Example: [root@doppio ~]# perf report | head /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols # Samples: 2621434559 # # Overhead Command Shared Object Symbol # ........ ............... ............................. ...... # 7.91% init [kernel] [k] read_hpet 7.64% init [kernel] [k] mwait_idle_with_hints 7.60% swapper [kernel] [k] read_hpet 7.60% swapper [kernel] [k] mwait_idle_with_hints 3.65% init [kernel] [k] 0xffffffffa02339d9 [root@doppio ~]# In this case the 'perf' binary was an older one, vanished, so its symbols probably wouldn't match or would cause subtly different (and misleading) output. Next patches will support the kernel as well, reading the build id notes for it and the modules from /sys. Another patch should also introduce a new plumbing command: 'perf list-buildids' that will then be used in porcelain that is distro specific to fetch -debuginfo packages where such buildids are present. This will in turn allow for one to run 'perf record' in one machine and 'perf report' in another. Future work on having the buildid sent directly from the kernel in the PERF_RECORD_MMAP event is needed to close races, as the DSO can be changed during a 'perf record' session, but this patch at least helps with non-corner cases and current/older kernels. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Jim Keniston <jkenisto@us.ibm.com> Cc: K. Prasad <prasad@linux.vnet.ibm.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roland McGrath <roland@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-04 20:50:43 +00:00
self->loaded = 1;
if (fd < 0)
return -1;
err = dso__load_sym(self, map, self->long_name, fd, filter, 1, 0);
close(fd);
return err;
}
int dsos__load_kernel(const char *vmlinux, symbol_filter_t filter,
int use_modules)
{
int err = -1;
struct dso *dso = dso__new(vmlinux);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (dso == NULL)
return -1;
dso->short_name = "[kernel]";
kernel_map = map__new2(0, dso);
if (kernel_map == NULL)
goto out_delete_dso;
kernel_map->map_ip = kernel_map->unmap_ip = identity__map_ip;
if (use_modules && dsos__load_modules() < 0) {
pr_warning("Failed to load list of modules in use! "
"Continuing...\n");
use_modules = 0;
}
if (vmlinux) {
err = dso__load_vmlinux(dso, kernel_map, vmlinux, filter);
if (err > 0 && use_modules) {
int syms = dsos__load_modules_sym(filter);
if (syms < 0)
pr_warning("Failed to read module symbols!"
" Continuing...\n");
else
err += syms;
}
}
if (err <= 0)
err = kernel_maps__load_kallsyms(filter, use_modules);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
if (err > 0) {
struct rb_node *node = rb_first(&dso->syms);
struct symbol *sym = rb_entry(node, struct symbol, rb_node);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
kernel_map->start = sym->start;
node = rb_last(&dso->syms);
sym = rb_entry(node, struct symbol, rb_node);
kernel_map->end = sym->end;
dso->origin = DSO__ORIG_KERNEL;
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
kernel_maps__insert(kernel_map);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
/*
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
* Now that we have all sorted out, just set the ->end of all
* maps:
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
*/
perf tools: Improve kernel/modules symbol lookup This removes the ovelapping of vmlinux addresses with modules, using the ELF section name when using --vmlinux and creating a unique DSO name when using /proc/kallsyms ([kernel].N). This is done by creating multiple 'struct map' instances for address ranges backed by DSOs that have just the symbols for that range and a name that is derived from the ELF section name.o Now it is possible to ask for just the symbols in some particular kernel section: $ perf report -m --vmlinux ../build/tip-recvmmsg/vmlinux \ --dsos [kernel].vsyscall_fn | head -15 52.73% Xorg [.] vread_hpet 18.61% firefox [.] vread_hpet 14.50% npviewer.bin [.] vread_hpet 6.83% compiz [.] vread_hpet 5.73% glxgears [.] vread_hpet 0.63% java [.] vread_hpet 0.30% gnome-terminal [.] vread_hpet 0.23% perf [.] vread_hpet 0.18% xchat [.] vread_hpet $ Now we don't have to first lookup the list of modules and then, if it fails, vmlinux symbols, its just a simple lookup for the map then the symbols, just like for threads. Reports generated using /proc/kallsyms and --vmlinux should provide the same results, modulo the DSO name for sections other than ".text". But they don't right now because things like: ffffffff81011c20-ffffffff81012068 system_call ffffffff81011c30-ffffffff81011c9b system_call_after_swapgs ffffffff81011c9c-ffffffff81011cb6 system_call_fastpath ffffffff81011cb7-ffffffff81011cbb ret_from_sys_call I.e. overlapping symbols, again some ASM special case that we have to fixup. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1254934136-8503-1-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-07 16:48:56 +00:00
kernel_maps__fixup_end();
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
dsos__add(dso);
if (verbose)
kernel_maps__fprintf(stderr);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
}
return err;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
out_delete_dso:
dso__delete(dso);
return -1;
}
LIST_HEAD(dsos);
struct dso *vdso;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 10:26:57 +00:00
const char *vmlinux_name = "vmlinux";
int modules;
static void dsos__add(struct dso *dso)
{
list_add_tail(&dso->node, &dsos);
}
static struct dso *dsos__find(const char *name)
{
struct dso *pos;
list_for_each_entry(pos, &dsos, node)
if (strcmp(pos->name, name) == 0)
return pos;
return NULL;
}
struct dso *dsos__findnew(const char *name)
{
struct dso *dso = dsos__find(name);
if (!dso) {
dso = dso__new(name);
if (dso != NULL)
dsos__add(dso);
}
return dso;
}
void dsos__fprintf(FILE *fp)
{
struct dso *pos;
list_for_each_entry(pos, &dsos, node)
dso__fprintf(pos, fp);
}
int load_kernel(symbol_filter_t filter)
{
if (dsos__load_kernel(vmlinux_name, filter, modules) <= 0)
return -1;
vdso = dso__new("[vdso]");
if (!vdso)
return -1;
dsos__add(vdso);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 06:29:58 +00:00
return 0;
}
void symbol__init(unsigned int priv_size)
{
elf_version(EV_CURRENT);
symbol__priv_size = priv_size;
}