FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-22 09:22:37 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
637d122baa
linux/arch/arm/mach-integrator/Kconfig

162 lines
4.0 KiB
Plaintext
Raw Normal View History

ARM: integrator: use explicit core module options For consistency with the other platforms, this remove the CPU selection logic in mm/Kconfig that was only used by integrator, and adds specific options for each available core tile and core module, which in turn select the correct CPUs. This is consistent with the new way that we do it for realview and all other platforms. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-25 16:32:20 +00:00
menuconfig ARCH_INTEGRATOR
ARM: use "depends on" for SoC configs instead of "if" after prompt Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-16 03:06:10 +00:00
bool "ARM Ltd. Integrator family"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
ARM: integrator: make the Integrator multiplatform This converts the ARM Integrator reference designs to be fully multiplatform. V4T, V5 and V6 multiplatform builds become possible after this patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-22 21:30:35 +00:00
select ARM_AMBA
select COMMON_CLK_VERSATILE
select HAVE_TCM
select ICST
ARM: integrator: move restart to the device tree Using the augmented reset driver for the Versatile family, we can move the reset handling for the Integrator out of the machine. We add a "syscon" attribute to the core module, and access the syscon registers using this handle. We need to select SYSCON, POWER, POWER_RESET and POWER_RESET_VERSATILE in order for the restart functionality to always be available on all systems (it should not be optional). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-17 14:18:59 +00:00
select MFD_SYSCON
ARM: integrator: make the Integrator multiplatform This converts the ARM Integrator reference designs to be fully multiplatform. V4T, V5 and V6 multiplatform builds become possible after this patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-22 21:30:35 +00:00
select PLAT_VERSATILE
ARM: integrator: move restart to the device tree Using the augmented reset driver for the Versatile family, we can move the reset handling for the Integrator out of the machine. We add a "syscon" attribute to the core module, and access the syscon registers using this handle. We need to select SYSCON, POWER, POWER_RESET and POWER_RESET_VERSATILE in order for the restart functionality to always be available on all systems (it should not be optional). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-17 14:18:59 +00:00
select POWER_RESET
select POWER_RESET_VERSATILE
select POWER_SUPPLY
soc: move SoC driver for the ARM Integrator This creates a new SoC bus driver for the ARM Integrator family core modules to register the SoC bus and provide sysfs info for the core module. We delete the corresponding code from the Integrator machine and select this driver to get a clean result. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-24 10:51:20 +00:00
select SOC_INTEGRATOR_CM
ARM: integrator: make the Integrator multiplatform This converts the ARM Integrator reference designs to be fully multiplatform. V4T, V5 and V6 multiplatform builds become possible after this patch. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-22 21:30:35 +00:00
select SPARSE_IRQ
select VERSATILE_FPGA_IRQ
help
Support for ARM's Integrator platform.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if ARCH_INTEGRATOR
config ARCH_INTEGRATOR_AP
bool "Support Integrator/AP and Integrator/PP2 platforms"
clocksource: convert Integrator/AP 16-bit down counting clocksource Convert the Integrator/AP 16-bit down-counting clocksource to the generic clocksource infrastructure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-08 14:35:22 +00:00
select CLKSRC_MMIO
ARM: 6520/1: Kconfig: add new symbol MIGHT_HAVE_PCI Today more boards with arm cpu have selectable pci bus. This patch makes this more scalable and remove line continuations in Kconfig Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-02 11:32:15 +00:00
select MIGHT_HAVE_PCI
ARM: integrator: only select pl01x if TTY is enabled Building the integrator platform without TTY support currently results in a build failure because we always turn on the pl010 or pl011 drivers. Changing this to a conditional 'select' statement enables us to build more random configurations, although it should have little impact for practical configurations. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org>
2014-03-13 12:03:28 +00:00
select SERIAL_AMBA_PL010 if TTY
select SERIAL_AMBA_PL010_CONSOLE if TTY
ARM: integrator: hook the AP into the SoC bus This hooks the Integrator/AP into the SoC bus when booting from device tree, by mapping the AP controller registers first, then registering the SoC device, and then populating the device tree with the SoC device as parent. Introduce some helpers in the core to provide sysfs files detailing the use of the SoC ID which will later be reused by the Integrator/CP patch for the same bus grouping. Cc: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-02 00:31:10 +00:00
select SOC_BUS
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
Include support for the ARM(R) Integrator/AP and
Integrator/PP2 platforms.
config INTEGRATOR_IMPD1
ARM: integrator: fix section mismatch problem This addresses a section mismatch problem in the IM-PD1 driver in the Integrator/AP. The IM-PD1 contains a VIC interrupt controller and therefore the driver calls vic_init_cascaded() which is marked __init as irqchips are simply not hot-pluggable and specifically the VIC is assumed to initiate only on boot. However the module driver model of the Integrator LM bus assumes that logic tile drivers can be probed at runtime. This is not really the case for IM-PD1: these tiles are detected at boot and they cannot be plugged into a running system. Before this patch it is of course possible to modprobe them later. By first forcing the IM-PD1 to bool we make sure this driver gets compiled into the kernel, and we know it will be probed only at boot time when the tiles are detected, so we can tag its probe function __init_refok as we know it won't be called after boot now, and the section mismatch problem goes away. As a side effect, sysfs binding from userspace becomes impossible, so we tag the driver to suppress the bind/unbind sysfs attributes. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-04 12:47:28 +00:00
bool "Include support for Integrator/IM-PD1"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
depends on ARCH_INTEGRATOR_AP
ARM: integrator: select GPIO block The Integrator/AP can be used with a logic module called IM-PD1, which contains a few AMBA PrimeCell devices, one of which is the PL061 GPIO controller. As the lines from this GPIO controller are looped back to devices on the board itself and provides resources back to it, we need to always have GPIO and the PL061 driver available for other devices to work. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-22 13:18:01 +00:00
select ARCH_REQUIRE_GPIOLIB
ARM: integrator: register the IM-PD1 VIC The peripherals on the IM-PD1 has never really been able to properly fire their IRQs to the main FPGA IRQ controller. Cascade it properly and register interrupts for all the devices in the array. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-21 22:13:17 +00:00
select ARM_VIC
ARM: integrator: select GPIO block The Integrator/AP can be used with a logic module called IM-PD1, which contains a few AMBA PrimeCell devices, one of which is the PL061 GPIO controller. As the lines from this GPIO controller are looped back to devices on the board itself and provides resources back to it, we need to always have GPIO and the PL061 driver available for other devices to work. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-22 13:18:01 +00:00
select GPIO_PL061 if GPIOLIB
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
help
The IM-PD1 is an add-on logic module for the Integrator which
allows ARM(R) Ltd PrimeCells to be developed and evaluated.
The IM-PD1 can be found on the Integrator/PP2 platform.
To compile this driver as a module, choose M here: the
module will be called impd1.
ARM: integrator: use explicit core module options For consistency with the other platforms, this remove the CPU selection logic in mm/Kconfig that was only used by integrator, and adds specific options for each available core tile and core module, which in turn select the correct CPUs. This is consistent with the new way that we do it for realview and all other platforms. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-25 16:32:20 +00:00
config INTEGRATOR_CM7TDMI
bool "Integrator/CM7TDMI core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V4 && !MMU
select CPU_ARM7TDMI
config INTEGRATOR_CM720T
bool "Integrator/CM720T core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V4T
select CPU_ARM720T
config INTEGRATOR_CM740T
bool "Integrator/CM740T core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V4T && !MMU
select CPU_ARM740T
config INTEGRATOR_CM920T
bool "Integrator/CM920T core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V4T
select CPU_ARM920T
config INTEGRATOR_CM922T_XA10
bool "Integrator/CM922T-XA10 core module"
depends on ARCH_MULTI_V4T
depends on ARCH_INTEGRATOR_AP
select CPU_ARM922T
config INTEGRATOR_CM926EJS
bool "Integrator/CM926EJ-S core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V5
select CPU_ARM926T
config INTEGRATOR_CM940T
bool "Integrator/CM940T core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V4T && !MMU
select CPU_ARM940T
config INTEGRATOR_CM946ES
bool "Integrator/CM946E-S core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V5 && !MMU
select CPU_ARM946E
config INTEGRATOR_CM966ES
bool "Integrator/CM966E-S core module"
depends on ARCH_INTEGRATOR_AP
depends on BROKEN # no kernel support
config INTEGRATOR_CM10200E_REV0
bool "Integrator/CM10200E rev.0 core module"
depends on ARCH_INTEGRATOR_AP && n
depends on ARCH_MULTI_V5
select CPU_ARM1020
config INTEGRATOR_CM10200E
bool "Integrator/CM10200E core module"
depends on ARCH_INTEGRATOR_AP && n
depends on ARCH_MULTI_V5
select CPU_ARM1020E
config INTEGRATOR_CM10220E
bool "Integrator/CM10220E core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V5
select CPU_ARM1022
config INTEGRATOR_CM1026EJS
bool "Integrator/CM1026EJ-S core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V5
select CPU_ARM1026
config INTEGRATOR_CM1136JFS
bool "Integrator/CM1136JF-S core module"
depends on ARCH_INTEGRATOR_AP
depends on ARCH_MULTI_V6
select CPU_V6
config ARCH_INTEGRATOR_CP
bool "Support Integrator/CP platform"
depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
select ARM_TIMER_SP804
select SERIAL_AMBA_PL011 if TTY
select SERIAL_AMBA_PL011_CONSOLE if TTY
select SOC_BUS
help
Include support for the ARM(R) Integrator CP platform.
config INTEGRATOR_CT7T
bool "Integrator/CT7TD (ARM7TDMI) core tile"
depends on ARCH_INTEGRATOR_CP
depends on ARCH_MULTI_V4T && !MMU
select CPU_ARM7TDMI
config INTEGRATOR_CT926
bool "Integrator/CT926 (ARM926EJ-S) core tile"
depends on ARCH_INTEGRATOR_CP
depends on ARCH_MULTI_V5
select CPU_ARM926T
config INTEGRATOR_CTB36
bool "Integrator/CTB36 (ARM1136JF-S) core tile"
depends on ARCH_INTEGRATOR_CP
depends on ARCH_MULTI_V6
select CPU_V6
config ARCH_CINTEGRATOR
depends on ARCH_INTEGRATOR_CP
def_bool y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
endif
Reference in New Issue Copy Permalink