mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-16 05:50:19 +00:00
290 lines
11 KiB
Plaintext
290 lines
11 KiB
Plaintext
|
-------------------------------------------------------------------------------
|
|||
|
|
Readme for Linux device driver for the OmniVision OV511 USB to camera bridge IC
|
|||
|
|
-------------------------------------------------------------------------------
|
|||
|
|
|
|||
|
|
Author: Mark McClelland
|
|||
|
|
Homepage: http://alpha.dyndns.org/ov511
|
|||
|
|
|
|||
|
|
INTRODUCTION:
|
|||
|
|
|
|||
|
|
This is a driver for the OV511, a USB-only chip used in many "webcam" devices.
|
|||
|
|
Any camera using the OV511/OV511+ and the OV6620/OV7610/20/20AE should work.
|
|||
|
|
Video capture devices that use the Philips SAA7111A decoder also work. It
|
|||
|
|
supports streaming and capture of color or monochrome video via the Video4Linux
|
|||
|
|
API. Most V4L apps are compatible with it. Most resolutions with a width and
|
|||
|
|
height that are a multiple of 8 are supported.
|
|||
|
|
|
|||
|
|
If you need more information, please visit the OV511 homepage at the above URL.
|
|||
|
|
|
|||
|
|
WHAT YOU NEED:
|
|||
|
|
|
|||
|
|
- If you want to help with the development, get the chip's specification docs at
|
|||
|
|
http://www.ovt.com/omniusbp.html
|
|||
|
|
|
|||
|
|
- A Video4Linux compatible frame grabber program (I recommend vidcat and xawtv)
|
|||
|
|
vidcat is part of the w3cam package: http://www.hdk-berlin.de/~rasca/w3cam/
|
|||
|
|
xawtv is available at: http://www.in-berlin.de/User/kraxel/xawtv.html
|
|||
|
|
|
|||
|
|
HOW TO USE IT:
|
|||
|
|
|
|||
|
|
Note: These are simplified instructions. For complete instructions see:
|
|||
|
|
http://alpha.dyndns.org/ov511/install.html
|
|||
|
|
|
|||
|
|
You must have first compiled USB support, support for your specific USB host
|
|||
|
|
controller (UHCI or OHCI), and Video4Linux support for your kernel (I recommend
|
|||
|
|
making them modules.) Make sure "Enforce bandwidth allocation" is NOT enabled.
|
|||
|
|
|
|||
|
|
Next, (as root):
|
|||
|
|
|
|||
|
|
modprobe usbcore
|
|||
|
|
modprobe usb-uhci <OR> modprobe usb-ohci
|
|||
|
|
modprobe videodev
|
|||
|
|
modprobe ov511
|
|||
|
|
|
|||
|
|
If it is not already there (it usually is), create the video device:
|
|||
|
|
|
|||
|
|
mknod /dev/video0 c 81 0
|
|||
|
|
|
|||
|
|
Optionally, symlink /dev/video to /dev/video0
|
|||
|
|
|
|||
|
|
You will have to set permissions on this device to allow you to read/write
|
|||
|
|
from it:
|
|||
|
|
|
|||
|
|
chmod 666 /dev/video
|
|||
|
|
chmod 666 /dev/video0 (if necessary)
|
|||
|
|
|
|||
|
|
Now you are ready to run a video app! Both vidcat and xawtv work well for me
|
|||
|
|
at 640x480.
|
|||
|
|
|
|||
|
|
[Using vidcat:]
|
|||
|
|
|
|||
|
|
vidcat -s 640x480 -p c > test.jpg
|
|||
|
|
xview test.jpg
|
|||
|
|
|
|||
|
|
[Using xawtv:]
|
|||
|
|
|
|||
|
|
From the main xawtv directory:
|
|||
|
|
|
|||
|
|
make clean
|
|||
|
|
./configure
|
|||
|
|
make
|
|||
|
|
make install
|
|||
|
|
|
|||
|
|
Now you should be able to run xawtv. Right click for the options dialog.
|
|||
|
|
|
|||
|
|
MODULE PARAMETERS:
|
|||
|
|
|
|||
|
|
You can set these with: insmod ov511 NAME=VALUE
|
|||
|
|
There is currently no way to set these on a per-camera basis.
|
|||
|
|
|
|||
|
|
NAME: autobright
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 1
|
|||
|
|
DESC: Brightness is normally under automatic control and can't be set
|
|||
|
|
manually by the video app. Set to 0 for manual control.
|
|||
|
|
|
|||
|
|
NAME: autogain
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 1
|
|||
|
|
DESC: Auto Gain Control enable. This feature is not yet implemented.
|
|||
|
|
|
|||
|
|
NAME: autoexp
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 1
|
|||
|
|
DESC: Auto Exposure Control enable. This feature is not yet implemented.
|
|||
|
|
|
|||
|
|
NAME: debug
|
|||
|
|
TYPE: integer (0-6)
|
|||
|
|
DEFAULT: 3
|
|||
|
|
DESC: Sets the threshold for printing debug messages. The higher the value,
|
|||
|
|
the more is printed. The levels are cumulative, and are as follows:
|
|||
|
|
0=no debug messages
|
|||
|
|
1=init/detection/unload and other significant messages
|
|||
|
|
2=some warning messages
|
|||
|
|
3=config/control function calls
|
|||
|
|
4=most function calls and data parsing messages
|
|||
|
|
5=highly repetitive mesgs
|
|||
|
|
|
|||
|
|
NAME: snapshot
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0
|
|||
|
|
DESC: Set to 1 to enable snapshot mode. read()/VIDIOCSYNC will block until
|
|||
|
|
the snapshot button is pressed. Note: enabling this mode disables
|
|||
|
|
/proc/video/ov511/<minor#>/button
|
|||
|
|
|
|||
|
|
NAME: cams
|
|||
|
|
TYPE: integer (1-4 for OV511, 1-31 for OV511+)
|
|||
|
|
DEFAULT: 1
|
|||
|
|
DESC: Number of cameras allowed to stream simultaneously on a single bus.
|
|||
|
|
Values higher than 1 reduce the data rate of each camera, allowing two
|
|||
|
|
or more to be used at once. If you have a complicated setup involving
|
|||
|
|
both OV511 and OV511+ cameras, trial-and-error may be necessary for
|
|||
|
|
finding the optimum setting.
|
|||
|
|
|
|||
|
|
NAME: compress
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0
|
|||
|
|
DESC: Set this to 1 to turn on the camera's compression engine. This can
|
|||
|
|
potentially increase the frame rate at the expense of quality, if you
|
|||
|
|
have a fast CPU. You must load the proper compression module for your
|
|||
|
|
camera before starting your application (ov511_decomp or ov518_decomp).
|
|||
|
|
|
|||
|
|
NAME: testpat
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0
|
|||
|
|
DESC: This configures the camera's sensor to transmit a colored test-pattern
|
|||
|
|
instead of an image. This does not work correctly yet.
|
|||
|
|
|
|||
|
|
NAME: dumppix
|
|||
|
|
TYPE: integer (0-2)
|
|||
|
|
DEFAULT: 0
|
|||
|
|
DESC: Dumps raw pixel data and skips post-processing and format conversion.
|
|||
|
|
It is for debugging purposes only. Options are:
|
|||
|
|
0: Disable (default)
|
|||
|
|
1: Dump raw data from camera, excluding headers and trailers
|
|||
|
|
2: Dumps data exactly as received from camera
|
|||
|
|
|
|||
|
|
NAME: led
|
|||
|
|
TYPE: integer (0-2)
|
|||
|
|
DEFAULT: 1 (Always on)
|
|||
|
|
DESC: Controls whether the LED (the little light) on the front of the camera
|
|||
|
|
is always off (0), always on (1), or only on when driver is open (2).
|
|||
|
|
This is not supported with the OV511, and might only work with certain
|
|||
|
|
cameras (ones that actually have the LED wired to the control pin, and
|
|||
|
|
not just hard-wired to be on all the time).
|
|||
|
|
|
|||
|
|
NAME: dump_bridge
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0
|
|||
|
|
DESC: Dumps the bridge (OV511[+] or OV518[+]) register values to the system
|
|||
|
|
log. Only useful for serious debugging/development purposes.
|
|||
|
|
|
|||
|
|
NAME: dump_sensor
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0
|
|||
|
|
DESC: Dumps the sensor register values to the system log. Only useful for
|
|||
|
|
serious debugging/development purposes.
|
|||
|
|
|
|||
|
|
NAME: printph
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0
|
|||
|
|
DESC: Setting this to 1 will dump the first 12 bytes of each isoc frame. This
|
|||
|
|
is only useful if you are trying to debug problems with the isoc data
|
|||
|
|
stream (i.e.: camera initializes, but vidcat hangs until Ctrl-C). Be
|
|||
|
|
warned that this dumps a large number of messages to your kernel log.
|
|||
|
|
|
|||
|
|
NAME: phy, phuv, pvy, pvuv, qhy, qhuv, qvy, qvuv
|
|||
|
|
TYPE: integer (0-63 for phy and phuv, 0-255 for rest)
|
|||
|
|
DEFAULT: OV511 default values
|
|||
|
|
DESC: These are registers 70h - 77h of the OV511, which control the
|
|||
|
|
prediction ranges and quantization thresholds of the compressor, for
|
|||
|
|
the Y and UV channels in the horizontal and vertical directions. See
|
|||
|
|
the OV511 or OV511+ data sheet for more detailed descriptions. These
|
|||
|
|
normally do not need to be changed.
|
|||
|
|
|
|||
|
|
NAME: lightfreq
|
|||
|
|
TYPE: integer (0, 50, or 60)
|
|||
|
|
DEFAULT: 0 (use sensor default)
|
|||
|
|
DESC: Sets the sensor to match your lighting frequency. This can reduce the
|
|||
|
|
appearance of "banding", i.e. horizontal lines or waves of light and
|
|||
|
|
dark that are often caused by artificial lighting. Valid values are:
|
|||
|
|
0 - Use default (depends on sensor, most likely 60 Hz)
|
|||
|
|
50 - For European and Asian 50 Hz power
|
|||
|
|
60 - For American 60 Hz power
|
|||
|
|
|
|||
|
|
NAME: bandingfilter
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0 (off)
|
|||
|
|
DESC: Enables the sensor<6F>s banding filter exposure algorithm. This reduces
|
|||
|
|
or stabilizes the "banding" caused by some artificial light sources
|
|||
|
|
(especially fluorescent). You might have to set lightfreq correctly for
|
|||
|
|
this to work right. As an added bonus, this sometimes makes it
|
|||
|
|
possible to capture your monitor<6F>s output.
|
|||
|
|
|
|||
|
|
NAME: fastset
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0 (off)
|
|||
|
|
DESC: Allows picture settings (brightness, contrast, color, and hue) to take
|
|||
|
|
effect immediately, even in the middle of a frame. This reduces the
|
|||
|
|
time to change settings, but can ruin frames during the change. Only
|
|||
|
|
affects OmniVision sensors.
|
|||
|
|
|
|||
|
|
NAME: force_palette
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0 (off)
|
|||
|
|
DESC: Forces the palette (color format) to a specific value. If an
|
|||
|
|
application requests a different palette, it will be rejected, thereby
|
|||
|
|
forcing it to try others until it succeeds. This is useful for forcing
|
|||
|
|
greyscale mode with a color camera, for example. Supported modes are:
|
|||
|
|
0 (Allows all the following formats)
|
|||
|
|
1 VIDEO_PALETTE_GREY (Linear greyscale)
|
|||
|
|
10 VIDEO_PALETTE_YUV420 (YUV 4:2:0 Planar)
|
|||
|
|
15 VIDEO_PALETTE_YUV420P (YUV 4:2:0 Planar, same as 10)
|
|||
|
|
|
|||
|
|
NAME: backlight
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0 (off)
|
|||
|
|
DESC: Setting this flag changes the exposure algorithm for OmniVision sensors
|
|||
|
|
such that objects in the camera's view (i.e. your head) can be clearly
|
|||
|
|
seen when they are illuminated from behind. It reduces or eliminates
|
|||
|
|
the sensor's auto-exposure function, so it should only be used when
|
|||
|
|
needed. Additionally, it is only supported with the OV6620 and OV7620.
|
|||
|
|
|
|||
|
|
NAME: unit_video
|
|||
|
|
TYPE: Up to 16 comma-separated integers
|
|||
|
|
DEFAULT: 0,0,0... (automatically assign the next available minor(s))
|
|||
|
|
DESC: You can specify up to 16 minor numbers to be assigned to ov511 devices.
|
|||
|
|
For example, "unit_video=1,3" will make the driver use /dev/video1 and
|
|||
|
|
/dev/video3 for the first two devices it detects. Additional devices
|
|||
|
|
will be assigned automatically starting at the first available device
|
|||
|
|
node (/dev/video0 in this case). Note that you cannot specify 0 as a
|
|||
|
|
minor number. This feature requires kernel version 2.4.5 or higher.
|
|||
|
|
|
|||
|
|
NAME: remove_zeros
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0 (do not skip any incoming data)
|
|||
|
|
DESC: Setting this to 1 will remove zero-padding from incoming data. This
|
|||
|
|
will compensate for the blocks of corruption that can appear when the
|
|||
|
|
camera cannot keep up with the speed of the USB bus (eg. at low frame
|
|||
|
|
resolutions). This feature is always enabled when compression is on.
|
|||
|
|
|
|||
|
|
NAME: mirror
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0 (off)
|
|||
|
|
DESC: Setting this to 1 will reverse ("mirror") the image horizontally. This
|
|||
|
|
might be necessary if your camera has a custom lens assembly. This has
|
|||
|
|
no effect with video capture devices.
|
|||
|
|
|
|||
|
|
NAME: ov518_color
|
|||
|
|
TYPE: integer (Boolean)
|
|||
|
|
DEFAULT: 0 (off)
|
|||
|
|
DESC: Enable OV518 color support. This is off by default since it doesn't
|
|||
|
|
work most of the time. If you want to try it, you must also load
|
|||
|
|
ov518_decomp with the "nouv=0" parameter. If you get improper colors or
|
|||
|
|
diagonal lines through the image, restart your video app and try again.
|
|||
|
|
Repeat as necessary.
|
|||
|
|
|
|||
|
|
WORKING FEATURES:
|
|||
|
|
o Color streaming/capture at most widths and heights that are multiples of 8.
|
|||
|
|
o Monochrome (use force_palette=1 to enable)
|
|||
|
|
o Setting/getting of saturation, contrast, brightness, and hue (only some of
|
|||
|
|
them work the OV7620 and OV7620AE)
|
|||
|
|
o /proc status reporting
|
|||
|
|
o SAA7111A video capture support at 320x240 and 640x480
|
|||
|
|
o Compression support
|
|||
|
|
o SMP compatibility
|
|||
|
|
|
|||
|
|
HOW TO CONTACT ME:
|
|||
|
|
|
|||
|
|
You can email me at mark@alpha.dyndns.org . Please prefix the subject line
|
|||
|
|
with "OV511: " so that I am certain to notice your message.
|
|||
|
|
|
|||
|
|
CREDITS:
|
|||
|
|
|
|||
|
|
The code is based in no small part on the CPiA driver by Johannes Erdfelt,
|
|||
|
|
Randy Dunlap, and others. Big thanks to them for their pioneering work on that
|
|||
|
|
and the USB stack. Thanks to Bret Wallach for getting camera reg IO, ISOC, and
|
|||
|
|
image capture working. Thanks to Orion Sky Lawlor, Kevin Moore, and Claudio
|
|||
|
|
Matsuoka for their work as well.
|
|||
|
|
|