FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-21 00:42:16 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
a5a14de22e
linux/fs/xfs/xfs_log.h

187 lines
5.3 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 03:58:39 +00:00
* Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
* All Rights Reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 03:58:39 +00:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* published by the Free Software Foundation.
*
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 03:58:39 +00:00
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 03:58:39 +00:00
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*/
#ifndef __XFS_LOG_H__
#define __XFS_LOG_H__
xfs: separate out log format definitions The on-disk format definitions for the log are spread randoms through a couple of header files. Consolidate it all in a single file that can be shared easily with userspace. This means that xfs_log.h and xfs_log_priv.h no longer need to be shared with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 10:49:22 +00:00
struct xfs_log_vec {
struct xfs_log_vec *lv_next; /* next lv in build list */
int lv_niovecs; /* number of iovecs in lv */
struct xfs_log_iovec *lv_iovecp; /* iovec array */
struct xfs_log_item *lv_item; /* owner */
char *lv_buf; /* formatted buffer */
int lv_buf_len; /* size of formatted buffer */
xfs: Reduce allocations during CIL insertion Now that we have the size of the object before the formatting pass is called, we can allocation the log vector and it's buffer in a single allocation rather than two separate allocations. Store the size of the allocated buffer in the log vector so that we potentially avoid allocation for future modifications of the object. While touching this code, remove the IOP_FORMAT definition. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 10:50:05 +00:00
int lv_size; /* size of allocated lv */
xfs: separate out log format definitions The on-disk format definitions for the log are spread randoms through a couple of header files. Consolidate it all in a single file that can be shared easily with userspace. This means that xfs_log.h and xfs_log_priv.h no longer need to be shared with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 10:49:22 +00:00
};
#define XFS_LOG_VEC_ORDERED (-1)
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:00:43 +00:00
static inline void *
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:34:02 +00:00
xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
uint type)
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:00:43 +00:00
{
struct xfs_log_iovec *vec = *vecp;
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:34:02 +00:00
if (vec) {
ASSERT(vec - lv->lv_iovecp < lv->lv_niovecs);
vec++;
} else {
vec = &lv->lv_iovecp[0];
}
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:00:43 +00:00
vec->i_type = type;
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:34:02 +00:00
vec->i_addr = lv->lv_buf + lv->lv_buf_len;
ASSERT(IS_ALIGNED((unsigned long)vec->i_addr, sizeof(uint64_t)));
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:00:43 +00:00
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:34:02 +00:00
*vecp = vec;
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:00:43 +00:00
return vec->i_addr;
}
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 00:34:02 +00:00
static inline void
xlog_finish_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec *vec, int len)
{
/*
* We need to make sure the next buffer is naturally aligned for the
* biggest basic data type we put into it. We already accounted for
* this when sizing the buffer.
*/
lv->lv_buf_len += round_up(len, sizeof(uint64_t));
vec->i_len = len;
}
static inline void *
xlog_copy_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
uint type, void *data, int len)
{
void *buf;
buf = xlog_prepare_iovec(lv, vecp, type);
memcpy(buf, data, len);
xlog_finish_iovec(lv, *vecp, len);
return buf;
}
xfs: separate out log format definitions The on-disk format definitions for the log are spread randoms through a couple of header files. Consolidate it all in a single file that can be shared easily with userspace. This means that xfs_log.h and xfs_log_priv.h no longer need to be shared with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 10:49:22 +00:00
/*
* Structure used to pass callback function and the function's argument
* to the log manager.
*/
typedef struct xfs_log_callback {
struct xfs_log_callback *cb_next;
void (*cb_func)(void *, int);
void *cb_arg;
} xfs_log_callback_t;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
[XFS] We really suck at spulling. Thanks to Chris Pascoe for fixing all these typos. SGI-PV: 904196 SGI-Modid: xfs-linux-melb:xfs-kern:25539a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-28 22:55:14 +00:00
* By comparing each component, we don't have to worry about extra
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
* endian issues in treating two 32 bit numbers as one 64 bit number
*/
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 09:04:09 +00:00
static inline xfs_lsn_t _lsn_cmp(xfs_lsn_t lsn1, xfs_lsn_t lsn2)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
if (CYCLE_LSN(lsn1) != CYCLE_LSN(lsn2))
return (CYCLE_LSN(lsn1)<CYCLE_LSN(lsn2))? -999 : 999;
if (BLOCK_LSN(lsn1) != BLOCK_LSN(lsn2))
return (BLOCK_LSN(lsn1)<BLOCK_LSN(lsn2))? -999 : 999;
return 0;
}
#define XFS_LSN_CMP(x,y) _lsn_cmp(x,y)
/*
* Macros, structures, prototypes for interface to the log manager.
*/
/*
* Flags to xfs_log_done()
*/
#define XFS_LOG_REL_PERM_RESERV 0x1
/*
* Flags to xfs_log_force()
*
* XFS_LOG_SYNC: Synchronous force in-core log to disk
*/
#define XFS_LOG_SYNC 0x1
/* Log manager interfaces */
struct xfs_mount;
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-15 23:34:54 +00:00
struct xlog_in_core;
[XFS] Fix double free of log tickets When an I/O error occurs during an intermediate commit on a rolling transaction, xfs_trans_commit() will free the transaction structure and the related ticket. However, the duplicate transaction that gets used as the transaction continues still contains a pointer to the ticket. Hence when the duplicate transaction is cancelled and freed, we free the ticket a second time. Add reference counting to the ticket so that we hold an extra reference to the ticket over the transaction commit. We drop the extra reference once we have checked that the transaction commit did not return an error, thus avoiding a double free on commit error. Credit to Nick Piggin for tripping over the problem. SGI-PV: 989741 Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-17 06:37:10 +00:00
struct xlog_ticket;
xfs: factor log item initialisation Each log item type does manual initialisation of the log item. Delayed logging introduces new fields that need initialisation, so factor all the open coded initialisation into a common function first. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-03-22 23:10:00 +00:00
struct xfs_log_item;
struct xfs_item_ops;
xfs: make the log ticket ID available outside the log infrastructure The ticket ID is needed to uniquely identify transactions when doing busy extent matching. Delayed logging changes the lifecycle of busy extents with respect to the transaction structure lifecycle. Hence we can no longer use the transaction structure as a means of determining the owner of the busy extent as it may be freed and reused while the busy extent is still active. This commit provides the infrastructure to access the xlog_tid_t held in the ticket from a transaction handle. This avoids the need for callers to peek into the transaction and log structures to find this out. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-14 11:41:46 +00:00
struct xfs_trans;
xfs: decouple log and transaction headers xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-22 23:50:10 +00:00
struct xfs_log_callback;
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-15 23:34:54 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
xfs_lsn_t xfs_log_done(struct xfs_mount *mp,
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-15 23:34:54 +00:00
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
uint flags);
[XFS] write barrier support Issue all log sync operations as ordered writes. In addition flush the disk cache on fsync if the sync cached operation didn't sync the log to disk (this requires some additional bookeping in the transaction and log code). If the device doesn't claim to support barriers, the filesystem has an extern log volume or the trial superblock write with barriers enabled failed we disable barriers and print a warning. We should probably fail the mount completely, but that could lead to nasty boot failures for the root filesystem. Not enabled by default yet, needs more destructive testing first. SGI-PV: 912426 SGI-Modid: xfs-linux:xfs-kern:198723a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-01 23:26:59 +00:00
int _xfs_log_force(struct xfs_mount *mp,
uint flags,
int *log_forced);
[XFS] Sanitise xfs_log_force error checking. xfs_log_force() is declared to return an error, but we almost never check it. We don't need to check it in most cases; if there's a log I/O error then we'll be shutting down the filesystem anyway and that means we'll catch the error somewhere else. However, on certain calls we should be returning an error - sync transactions, fsync, sync writes, etc. so this isn't a pure black and white distinction. Hence make xfs_log_force() a void function that issues a warning to the syslog on error, and call _xfs_log_force() in all the places where we actually care about the error status returned. SGI-PV: 980084 SGI-Modid: xfs-linux-melb:xfs-kern:30832a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-10 02:24:30 +00:00
void xfs_log_force(struct xfs_mount *mp,
uint flags);
xfs: cleanup up xfs_log_force calling conventions Remove the XFS_LOG_FORCE argument which was always set, and the XFS_LOG_URGE define, which was never used. Split xfs_log_force into a two helpers - xfs_log_force which forces the whole log, and xfs_log_force_lsn which forces up to the specified LSN. The underlying implementations already were entirely separate, as were the users. Also re-indent the new _xfs_log_force/_xfs_log_force which previously had a weird coding style. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-19 09:56:46 +00:00
int _xfs_log_force_lsn(struct xfs_mount *mp,
xfs_lsn_t lsn,
uint flags,
int *log_forced);
void xfs_log_force_lsn(struct xfs_mount *mp,
xfs_lsn_t lsn,
uint flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int xfs_log_mount(struct xfs_mount *mp,
struct xfs_buftarg *log_target,
xfs_daddr_t start_block,
int num_bblocks);
[XFS] cleanup xfs_mountfs Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 06:49:32 +00:00
int xfs_log_mount_finish(struct xfs_mount *mp);
xfs: split tail_lsn assignments from log space wakeups Currently xfs_log_move_tail has a tail_lsn argument that is horribly overloaded: it may contain either an actual lsn to assign to the log tail, 0 as a special case to use the last sync LSN, or 1 to indicate that no tail LSN assignment should be performed, and we should opportunisticly wake up at one task waiting for log space even if we did not move the LSN. Remove the tail lsn assigned from xfs_log_move_tail and make the two callers use xlog_assign_tail_lsn instead of the current variant of partially using the code in xfs_log_move_tail and partially opencoding it. Note that means we grow an addition lock roundtrip on the AIL lock for each bulk update or delete, which is still far less than what we had before introducing the bulk operations. If this proves to be a problem we can still add a variant of xlog_assign_tail_lsn that expects the lock to be held already. Also rename the remainder of xfs_log_move_tail to xfs_log_space_wake as that name describes its functionality much better. Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-20 02:31:20 +00:00
xfs_lsn_t xlog_assign_tail_lsn(struct xfs_mount *mp);
xfs: allow assigning the tail lsn with the AIL lock held Provide a variant of xlog_assign_tail_lsn that has the AIL lock already held. By doing so we do an additional atomic_read + atomic_set under the lock, which comes down to two instructions. Switch xfs_trans_ail_update_bulk and xfs_trans_ail_delete_bulk to the new version to reduce the number of lock roundtrips, and prepare for a new addition that would require a third lock roundtrip in xfs_trans_ail_delete_bulk. This addition is also the reason for slightly rearranging the conditionals and relying on xfs_log_space_wake for checking that the filesystem has been shut down internally. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-23 05:58:33 +00:00
xfs_lsn_t xlog_assign_tail_lsn_locked(struct xfs_mount *mp);
xfs: cleanup xfs_log_space_wake Remove the now unused opportunistic parameter, and use the the xlog_writeq_wake and xlog_reserveq_wake helpers now that we don't have to care about the opportunistic wakeups. Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-20 02:31:23 +00:00
void xfs_log_space_wake(struct xfs_mount *mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int xfs_log_notify(struct xfs_mount *mp,
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-15 23:34:54 +00:00
struct xlog_in_core *iclog,
xfs: decouple log and transaction headers xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-22 23:50:10 +00:00
struct xfs_log_callback *callback_entry);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int xfs_log_release_iclog(struct xfs_mount *mp,
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-15 23:34:54 +00:00
struct xlog_in_core *iclog);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int xfs_log_reserve(struct xfs_mount *mp,
int length,
int count,
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-15 23:34:54 +00:00
struct xlog_ticket **ticket,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
__uint8_t clientid,
xfs: split and cleanup xfs_log_reserve Split the log regrant case out of xfs_log_reserve into a separate function, and merge xlog_grant_log_space and xlog_regrant_write_log_space into their respective callers. Also replace the XFS_LOG_PERM_RESERV flag, which easily got misused before the previous cleanups with a simple boolean parameter. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-20 02:31:31 +00:00
bool permanent,
[XFS] 929956 add log debugging and tracing info SGI-PV: 931456 SGI-Modid: xfs-linux:xfs-kern:23155a Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-09-02 06:42:05 +00:00
uint t_type);
xfs: split and cleanup xfs_log_reserve Split the log regrant case out of xfs_log_reserve into a separate function, and merge xlog_grant_log_space and xlog_regrant_write_log_space into their respective callers. Also replace the XFS_LOG_PERM_RESERV flag, which easily got misused before the previous cleanups with a simple boolean parameter. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-20 02:31:31 +00:00
int xfs_log_regrant(struct xfs_mount *mp, struct xlog_ticket *tic);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int xfs_log_unmount_write(struct xfs_mount *mp);
xfs: cleanup log unmount handling Kill the current xfs_log_unmount wrapper and opencode the two function calls in the only caller. Rename the current xfs_log_unmount_dealloc to xfs_log_unmount as it undoes xfs_log_mount and the new name makes that more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-03-16 07:19:29 +00:00
void xfs_log_unmount(struct xfs_mount *mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int xfs_log_force_umount(struct xfs_mount *mp, int logerror);
int xfs_log_need_covered(struct xfs_mount *mp);
void xlog_iodone(struct xfs_buf *);
xfs: Introduce delayed logging core code The delayed logging code only changes in-memory structures and as such can be enabled and disabled with a mount option. Add the mount option and emit a warning that this is an experimental feature that should not be used in production yet. We also need infrastructure to track committed items that have not yet been written to the log. This is what the Committed Item List (CIL) is for. The log item also needs to be extended to track the current log vector, the associated memory buffer and it's location in the Commit Item List. Extend the log item and log vector structures to enable this tracking. To maintain the current log format for transactions with delayed logging, we need to introduce a checkpoint transaction and a context for tracking each checkpoint from initiation to transaction completion. This includes adding a log ticket for tracking space log required/used by the context checkpoint. To track all the changes we need an io vector array per log item, rather than a single array for the entire transaction. Using the new log vector structure for this requires two passes - the first to allocate the log vector structures and chain them together, and the second to fill them out. This log vector chain can then be passed to the CIL for formatting, pinning and insertion into the CIL. Formatting of the log vector chain is relatively simple - it's just a loop over the iovecs on each log vector, but it is made slightly more complex because we re-write the iovec after the copy to point back at the memory buffer we just copied into. This code also needs to pin log items. If the log item is not already tracked in this checkpoint context, then it needs to be pinned. Otherwise it is already pinned and we don't need to pin it again. The only other complexity is calculating the amount of new log space the formatting has consumed. This needs to be accounted to the transaction in progress, and the accounting is made more complex becase we need also to steal space from it for log metadata in the checkpoint transaction. Calculate all this at insert time and update all the tickets, counters, etc correctly. Once we've formatted all the log items in the transaction, attach the busy extents to the checkpoint context so the busy extents live until checkpoint completion and can be processed at that point in time. Transactions can then be freed at this point in time. Now we need to issue checkpoints - we are tracking the amount of log space used by the items in the CIL, so we can trigger background checkpoints when the space usage gets to a certain threshold. Otherwise, checkpoints need ot be triggered when a log synchronisation point is reached - a log force event. Because the log write code already handles chained log vectors, writing the transaction is trivial, too. Construct a transaction header, add it to the head of the chain and write it into the log, then issue a commit record write. Then we can release the checkpoint log ticket and attach the context to the log buffer so it can be called during Io completion to complete the checkpoint. We also need to allow for synchronising multiple in-flight checkpoints. This is needed for two things - the first is to ensure that checkpoint commit records appear in the log in the correct sequence order (so they are replayed in the correct order). The second is so that xfs_log_force_lsn() operates correctly and only flushes and/or waits for the specific sequence it was provided with. To do this we need a wait variable and a list tracking the checkpoint commits in progress. We can walk this list and wait for the checkpoints to change state or complete easily, an this provides the necessary synchronisation for correct operation in both cases. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-21 04:37:18 +00:00
struct xlog_ticket *xfs_log_ticket_get(struct xlog_ticket *ticket);
[XFS] Fix double free of log tickets When an I/O error occurs during an intermediate commit on a rolling transaction, xfs_trans_commit() will free the transaction structure and the related ticket. However, the duplicate transaction that gets used as the transaction continues still contains a pointer to the ticket. Hence when the duplicate transaction is cancelled and freed, we free the ticket a second time. Add reference counting to the ticket so that we hold an extra reference to the ticket over the transaction commit. We drop the extra reference once we have checked that the transaction commit did not return an error, thus avoiding a double free on commit error. Credit to Nick Piggin for tripping over the problem. SGI-PV: 989741 Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-17 06:37:10 +00:00
void xfs_log_ticket_put(struct xlog_ticket *ticket);
xfs: convert xfs_log_commit_cil() to void Convert xfs_log_commit_cil() to a void function since it return nothing but 0 in any case, after that we can simplify the relative code logic in xfs_trans_commit() accordingly. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-07 04:26:07 +00:00
void xfs_log_commit_cil(struct xfs_mount *mp, struct xfs_trans *tp,
xfs: Introduce delayed logging core code The delayed logging code only changes in-memory structures and as such can be enabled and disabled with a mount option. Add the mount option and emit a warning that this is an experimental feature that should not be used in production yet. We also need infrastructure to track committed items that have not yet been written to the log. This is what the Committed Item List (CIL) is for. The log item also needs to be extended to track the current log vector, the associated memory buffer and it's location in the Commit Item List. Extend the log item and log vector structures to enable this tracking. To maintain the current log format for transactions with delayed logging, we need to introduce a checkpoint transaction and a context for tracking each checkpoint from initiation to transaction completion. This includes adding a log ticket for tracking space log required/used by the context checkpoint. To track all the changes we need an io vector array per log item, rather than a single array for the entire transaction. Using the new log vector structure for this requires two passes - the first to allocate the log vector structures and chain them together, and the second to fill them out. This log vector chain can then be passed to the CIL for formatting, pinning and insertion into the CIL. Formatting of the log vector chain is relatively simple - it's just a loop over the iovecs on each log vector, but it is made slightly more complex because we re-write the iovec after the copy to point back at the memory buffer we just copied into. This code also needs to pin log items. If the log item is not already tracked in this checkpoint context, then it needs to be pinned. Otherwise it is already pinned and we don't need to pin it again. The only other complexity is calculating the amount of new log space the formatting has consumed. This needs to be accounted to the transaction in progress, and the accounting is made more complex becase we need also to steal space from it for log metadata in the checkpoint transaction. Calculate all this at insert time and update all the tickets, counters, etc correctly. Once we've formatted all the log items in the transaction, attach the busy extents to the checkpoint context so the busy extents live until checkpoint completion and can be processed at that point in time. Transactions can then be freed at this point in time. Now we need to issue checkpoints - we are tracking the amount of log space used by the items in the CIL, so we can trigger background checkpoints when the space usage gets to a certain threshold. Otherwise, checkpoints need ot be triggered when a log synchronisation point is reached - a log force event. Because the log write code already handles chained log vectors, writing the transaction is trivial, too. Construct a transaction header, add it to the head of the chain and write it into the log, then issue a commit record write. Then we can release the checkpoint log ticket and attach the context to the log buffer so it can be called during Io completion to complete the checkpoint. We also need to allow for synchronising multiple in-flight checkpoints. This is needed for two things - the first is to ensure that checkpoint commit records appear in the log in the correct sequence order (so they are replayed in the correct order). The second is so that xfs_log_force_lsn() operates correctly and only flushes and/or waits for the specific sequence it was provided with. To do this we need a wait variable and a list tracking the checkpoint commits in progress. We can walk this list and wait for the checkpoints to change state or complete easily, an this provides the necessary synchronisation for correct operation in both cases. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-21 04:37:18 +00:00
xfs_lsn_t *commit_lsn, int flags);
xfs: Ensure inode allocation buffers are fully replayed With delayed logging, we can get inode allocation buffers in the same transaction inode unlink buffers. We don't currently mark inode allocation buffers in the log, so inode unlink buffers take precedence over allocation buffers. The result is that when they are combined into the same checkpoint, only the unlinked inode chain fields are replayed, resulting in uninitialised inode buffers being detected when the next inode modification is replayed. To fix this, we need to ensure that we do not set the inode buffer flag in the buffer log item format flags if the inode allocation has not already hit the log. To avoid requiring a change to log recovery, we really need to make this a modification that relies only on in-memory sate. We can do this by checking during buffer log formatting (while the CIL cannot be flushed) if we are still in the same sequence when we commit the unlink transaction as the inode allocation transaction. If we are, then we do not add the inode buffer flag to the buffer log format item flags. This means the entire buffer will be replayed, not just the unlinked fields. We do this while CIL flusheѕ are locked out to ensure that we don't race with the sequence numbers changing and hence fail to put the inode buffer flag in the buffer format flags when we really need to. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-20 13:19:42 +00:00
bool xfs_log_item_in_current_chkpt(struct xfs_log_item *lip);
xfs: Introduce delayed logging core code The delayed logging code only changes in-memory structures and as such can be enabled and disabled with a mount option. Add the mount option and emit a warning that this is an experimental feature that should not be used in production yet. We also need infrastructure to track committed items that have not yet been written to the log. This is what the Committed Item List (CIL) is for. The log item also needs to be extended to track the current log vector, the associated memory buffer and it's location in the Commit Item List. Extend the log item and log vector structures to enable this tracking. To maintain the current log format for transactions with delayed logging, we need to introduce a checkpoint transaction and a context for tracking each checkpoint from initiation to transaction completion. This includes adding a log ticket for tracking space log required/used by the context checkpoint. To track all the changes we need an io vector array per log item, rather than a single array for the entire transaction. Using the new log vector structure for this requires two passes - the first to allocate the log vector structures and chain them together, and the second to fill them out. This log vector chain can then be passed to the CIL for formatting, pinning and insertion into the CIL. Formatting of the log vector chain is relatively simple - it's just a loop over the iovecs on each log vector, but it is made slightly more complex because we re-write the iovec after the copy to point back at the memory buffer we just copied into. This code also needs to pin log items. If the log item is not already tracked in this checkpoint context, then it needs to be pinned. Otherwise it is already pinned and we don't need to pin it again. The only other complexity is calculating the amount of new log space the formatting has consumed. This needs to be accounted to the transaction in progress, and the accounting is made more complex becase we need also to steal space from it for log metadata in the checkpoint transaction. Calculate all this at insert time and update all the tickets, counters, etc correctly. Once we've formatted all the log items in the transaction, attach the busy extents to the checkpoint context so the busy extents live until checkpoint completion and can be processed at that point in time. Transactions can then be freed at this point in time. Now we need to issue checkpoints - we are tracking the amount of log space used by the items in the CIL, so we can trigger background checkpoints when the space usage gets to a certain threshold. Otherwise, checkpoints need ot be triggered when a log synchronisation point is reached - a log force event. Because the log write code already handles chained log vectors, writing the transaction is trivial, too. Construct a transaction header, add it to the head of the chain and write it into the log, then issue a commit record write. Then we can release the checkpoint log ticket and attach the context to the log buffer so it can be called during Io completion to complete the checkpoint. We also need to allow for synchronising multiple in-flight checkpoints. This is needed for two things - the first is to ensure that checkpoint commit records appear in the log in the correct sequence order (so they are replayed in the correct order). The second is so that xfs_log_force_lsn() operates correctly and only flushes and/or waits for the specific sequence it was provided with. To do this we need a wait variable and a list tracking the checkpoint commits in progress. We can walk this list and wait for the checkpoints to change state or complete easily, an this provides the necessary synchronisation for correct operation in both cases. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-21 04:37:18 +00:00
xfs: sync work is now only periodic log work The only thing the periodic sync work does now is flush the AIL and idle the log. These are really functions of the log code, so move the work to xfs_log.c and rename it appropriately. The only wart that this leaves behind is the xfssyncd_centisecs sysctl, otherwise the xfssyncd is dead. Clean up any comments that related to xfssyncd to reflect it's passing. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 10:56:02 +00:00
void xfs_log_work_queue(struct xfs_mount *mp);
void xfs_log_worker(struct work_struct *work);
xfs: xfs_quiesce_attr() should quiesce the log like unmount xfs_quiesce_attr() is supposed to leave the log empty with an unmount record written. Right now it does not wait for the AIL to be emptied before writing the unmount record, not does it wait for metadata IO completion, either. Fix it to use the same method and code as xfs_log_unmount(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 10:56:08 +00:00
void xfs_log_quiesce(struct xfs_mount *mp);
xfs: sync work is now only periodic log work The only thing the periodic sync work does now is flush the AIL and idle the log. These are really functions of the log code, so move the work to xfs_log.c and rename it appropriately. The only wart that this leaves behind is the xfssyncd_centisecs sysctl, otherwise the xfssyncd is dead. Clean up any comments that related to xfssyncd to reflect it's passing. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 10:56:02 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif /* __XFS_LOG_H__ */
Reference in New Issue Copy Permalink