linux/drivers/gpu/vga/vga_switcheroo.c

1113 lines
33 KiB
C
Raw Normal View History

vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/*
* vga_switcheroo.c - Support for laptop with dual GPU using one set of outputs
*
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
* Copyright (c) 2010 Red Hat Inc.
* Author : Dave Airlie <airlied@redhat.com>
*
* Copyright (c) 2015 Lukas Wunner <lukas@wunner.de>
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS
* IN THE SOFTWARE.
*
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
*/
#define pr_fmt(fmt) "vga_switcheroo: " fmt
#include <linux/console.h>
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
#include <linux/debugfs.h>
#include <linux/fb.h>
#include <linux/fs.h>
#include <linux/module.h>
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
#include <linux/pci.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <linux/vgaarb.h>
#include <linux/vga_switcheroo.h>
/**
* DOC: Overview
*
* vga_switcheroo is the Linux subsystem for laptop hybrid graphics.
* These come in two flavors:
*
* * muxed: Dual GPUs with a multiplexer chip to switch outputs between GPUs.
* * muxless: Dual GPUs but only one of them is connected to outputs.
* The other one is merely used to offload rendering, its results
* are copied over PCIe into the framebuffer. On Linux this is
* supported with DRI PRIME.
*
* Hybrid graphics started to appear in the late Naughties and were initially
* all muxed. Newer laptops moved to a muxless architecture for cost reasons.
* A notable exception is the MacBook Pro which continues to use a mux.
* Muxes come with varying capabilities: Some switch only the panel, others
* can also switch external displays. Some switch all display pins at once
* while others can switch just the DDC lines. (To allow EDID probing
* for the inactive GPU.) Also, muxes are often used to cut power to the
* discrete GPU while it is not used.
*
* DRM drivers register GPUs with vga_switcheroo, these are henceforth called
* clients. The mux is called the handler. Muxless machines also register a
* handler to control the power state of the discrete GPU, its ->switchto
* callback is a no-op for obvious reasons. The discrete GPU is often equipped
* with an HDA controller for the HDMI/DP audio signal, this will also
* register as a client so that vga_switcheroo can take care of the correct
* suspend/resume order when changing the discrete GPU's power state. In total
* there can thus be up to three clients: Two vga clients (GPUs) and one audio
* client (on the discrete GPU). The code is mostly prepared to support
* machines with more than two GPUs should they become available.
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
*
* The GPU to which the outputs are currently switched is called the
* active client in vga_switcheroo parlance. The GPU not in use is the
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
* inactive client. When the inactive client's DRM driver is loaded,
* it will be unable to probe the panel's EDID and hence depends on
* VBIOS to provide its display modes. If the VBIOS modes are bogus or
* if there is no VBIOS at all (which is common on the MacBook Pro),
* a client may alternatively request that the DDC lines are temporarily
* switched to it, provided that the handler supports this. Switching
* only the DDC lines and not the entire output avoids unnecessary
* flickering.
*/
/**
* struct vga_switcheroo_client - registered client
* @pdev: client pci device
* @fb_info: framebuffer to which console is remapped on switching
* @pwr_state: current power state
* @ops: client callbacks
* @id: client identifier. Determining the id requires the handler,
* so gpus are initially assigned VGA_SWITCHEROO_UNKNOWN_ID
* and later given their true id in vga_switcheroo_enable()
* @active: whether the outputs are currently switched to this client
* @driver_power_control: whether power state is controlled by the driver's
* runtime pm. If true, writing ON and OFF to the vga_switcheroo debugfs
* interface is a no-op so as not to interfere with runtime pm
* @list: client list
*
* Registered client. A client can be either a GPU or an audio device on a GPU.
* For audio clients, the @fb_info, @active and @driver_power_control members
* are bogus.
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
struct vga_switcheroo_client {
struct pci_dev *pdev;
struct fb_info *fb_info;
enum vga_switcheroo_state pwr_state;
const struct vga_switcheroo_client_ops *ops;
enum vga_switcheroo_client_id id;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
bool active;
bool driver_power_control;
struct list_head list;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
};
/*
* protects access to struct vgasr_priv
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
static DEFINE_MUTEX(vgasr_mutex);
/**
* struct vgasr_priv - vga_switcheroo private data
* @active: whether vga_switcheroo is enabled.
* Prerequisite is the registration of two GPUs and a handler
* @delayed_switch_active: whether a delayed switch is pending
* @delayed_client_id: client to which a delayed switch is pending
* @debugfs_root: directory for vga_switcheroo debugfs interface
* @switch_file: file for vga_switcheroo debugfs interface
* @registered_clients: number of registered GPUs
* (counting only vga clients, not audio clients)
* @clients: list of registered clients
* @handler: registered handler
* @handler_flags: flags of registered handler
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
* @mux_hw_lock: protects mux state
* (in particular while DDC lines are temporarily switched)
* @old_ddc_owner: client to which DDC lines will be switched back on unlock
*
* vga_switcheroo private data. Currently only one vga_switcheroo instance
* per system is supported.
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
struct vgasr_priv {
bool active;
bool delayed_switch_active;
enum vga_switcheroo_client_id delayed_client_id;
struct dentry *debugfs_root;
struct dentry *switch_file;
int registered_clients;
struct list_head clients;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
const struct vga_switcheroo_handler *handler;
enum vga_switcheroo_handler_flags_t handler_flags;
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
struct mutex mux_hw_lock;
int old_ddc_owner;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
};
#define ID_BIT_AUDIO 0x100
#define client_is_audio(c) ((c)->id & ID_BIT_AUDIO)
#define client_is_vga(c) ((c)->id == VGA_SWITCHEROO_UNKNOWN_ID || \
!client_is_audio(c))
#define client_id(c) ((c)->id & ~ID_BIT_AUDIO)
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
static int vga_switcheroo_debugfs_init(struct vgasr_priv *priv);
static void vga_switcheroo_debugfs_fini(struct vgasr_priv *priv);
/* only one switcheroo per system */
static struct vgasr_priv vgasr_priv = {
.clients = LIST_HEAD_INIT(vgasr_priv.clients),
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
.mux_hw_lock = __MUTEX_INITIALIZER(vgasr_priv.mux_hw_lock),
};
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
static bool vga_switcheroo_ready(void)
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
{
/* we're ready if we get two clients + handler */
return !vgasr_priv.active &&
vgasr_priv.registered_clients == 2 && vgasr_priv.handler;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
static void vga_switcheroo_enable(void)
{
int ret;
struct vga_switcheroo_client *client;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/* call the handler to init */
if (vgasr_priv.handler->init)
vgasr_priv.handler->init();
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
list_for_each_entry(client, &vgasr_priv.clients, list) {
if (client->id != VGA_SWITCHEROO_UNKNOWN_ID)
continue;
ret = vgasr_priv.handler->get_client_id(client->pdev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (ret < 0)
return;
client->id = ret;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
vga_switcheroo_debugfs_init(&vgasr_priv);
vgasr_priv.active = true;
}
/**
* vga_switcheroo_register_handler() - register handler
* @handler: handler callbacks
* @handler_flags: handler flags
*
* Register handler. Enable vga_switcheroo if two vga clients have already
* registered.
*
* Return: 0 on success, -EINVAL if a handler was already registered.
*/
int vga_switcheroo_register_handler(const struct vga_switcheroo_handler *handler,
enum vga_switcheroo_handler_flags_t handler_flags)
{
mutex_lock(&vgasr_mutex);
if (vgasr_priv.handler) {
mutex_unlock(&vgasr_mutex);
return -EINVAL;
}
vgasr_priv.handler = handler;
vgasr_priv.handler_flags = handler_flags;
if (vga_switcheroo_ready()) {
pr_info("enabled\n");
vga_switcheroo_enable();
}
mutex_unlock(&vgasr_mutex);
return 0;
}
EXPORT_SYMBOL(vga_switcheroo_register_handler);
/**
* vga_switcheroo_unregister_handler() - unregister handler
*
* Unregister handler. Disable vga_switcheroo.
*/
void vga_switcheroo_unregister_handler(void)
{
mutex_lock(&vgasr_mutex);
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
mutex_lock(&vgasr_priv.mux_hw_lock);
vgasr_priv.handler_flags = 0;
vgasr_priv.handler = NULL;
if (vgasr_priv.active) {
pr_info("disabled\n");
vga_switcheroo_debugfs_fini(&vgasr_priv);
vgasr_priv.active = false;
}
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
mutex_unlock(&vgasr_priv.mux_hw_lock);
mutex_unlock(&vgasr_mutex);
}
EXPORT_SYMBOL(vga_switcheroo_unregister_handler);
/**
* vga_switcheroo_handler_flags() - obtain handler flags
*
* Helper for clients to obtain the handler flags bitmask.
*
* Return: Handler flags. A value of 0 means that no handler is registered
* or that the handler has no special capabilities.
*/
enum vga_switcheroo_handler_flags_t vga_switcheroo_handler_flags(void)
{
return vgasr_priv.handler_flags;
}
EXPORT_SYMBOL(vga_switcheroo_handler_flags);
static int register_client(struct pci_dev *pdev,
const struct vga_switcheroo_client_ops *ops,
enum vga_switcheroo_client_id id, bool active,
bool driver_power_control)
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
{
struct vga_switcheroo_client *client;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
client = kzalloc(sizeof(*client), GFP_KERNEL);
if (!client)
return -ENOMEM;
client->pwr_state = VGA_SWITCHEROO_ON;
client->pdev = pdev;
client->ops = ops;
client->id = id;
client->active = active;
client->driver_power_control = driver_power_control;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
mutex_lock(&vgasr_mutex);
list_add_tail(&client->list, &vgasr_priv.clients);
if (client_is_vga(client))
vgasr_priv.registered_clients++;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (vga_switcheroo_ready()) {
pr_info("enabled\n");
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
vga_switcheroo_enable();
}
mutex_unlock(&vgasr_mutex);
return 0;
}
/**
* vga_switcheroo_register_client - register vga client
* @pdev: client pci device
* @ops: client callbacks
* @driver_power_control: whether power state is controlled by the driver's
* runtime pm
*
* Register vga client (GPU). Enable vga_switcheroo if another GPU and a
* handler have already registered. The power state of the client is assumed
* to be ON.
*
* Return: 0 on success, -ENOMEM on memory allocation error.
*/
int vga_switcheroo_register_client(struct pci_dev *pdev,
const struct vga_switcheroo_client_ops *ops,
bool driver_power_control)
{
return register_client(pdev, ops, VGA_SWITCHEROO_UNKNOWN_ID,
pdev == vga_default_device(),
driver_power_control);
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
EXPORT_SYMBOL(vga_switcheroo_register_client);
/**
* vga_switcheroo_register_audio_client - register audio client
* @pdev: client pci device
* @ops: client callbacks
* @id: client identifier
*
* Register audio client (audio device on a GPU). The power state of the
* client is assumed to be ON.
*
* Return: 0 on success, -ENOMEM on memory allocation error.
*/
int vga_switcheroo_register_audio_client(struct pci_dev *pdev,
const struct vga_switcheroo_client_ops *ops,
enum vga_switcheroo_client_id id)
{
vga_switcheroo: Set active attribute to false for audio clients The active attribute in struct vga_switcheroo_client denotes whether the outputs are currently switched to this client. The attribute is only meaningful for vga clients. It is never used for audio clients. The function vga_switcheroo_register_audio_client() misuses this attribute to store whether the audio device is fully initialized. Most likely there was a misunderstanding about the meaning of "active" when this was added. Comment from Takashi's review: "Not really. The full initialization of audio was meant that the audio is active indeed. Admittedly, though, the active flag for each audio client doesn't play any role because the audio always follows the gfx state changes, and the value passed there doesn't reflect the actual state due to the later change. So, I agree with the removal of the flag itself -- or let the audio active flag following the corresponding gfx flag. The latter will make the proc output more consistent while the former is certainly more reduction of code." Set the active attribute to false for audio clients. Remove the active parameter from vga_switcheroo_register_audio_client() and its sole caller, hda_intel.c:register_vga_switcheroo(). vga_switcheroo_register_audio_client() was introduced by 3e9e63dbd374 ("vga_switcheroo: Add the support for audio clients"). Its use in hda_intel.c was introduced by a82d51ed24bb ("ALSA: hda - Support VGA-switcheroo"). v1.1: The changes above imply that in find_active_client() the call to client_is_vga() is now superfluous. Drop it. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> [danvet: Add Takashi's clarification to the commit message.] Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-27 14:43:43 +00:00
return register_client(pdev, ops, id | ID_BIT_AUDIO, false, false);
}
EXPORT_SYMBOL(vga_switcheroo_register_audio_client);
static struct vga_switcheroo_client *
find_client_from_pci(struct list_head *head, struct pci_dev *pdev)
{
struct vga_switcheroo_client *client;
list_for_each_entry(client, head, list)
if (client->pdev == pdev)
return client;
return NULL;
}
static struct vga_switcheroo_client *
find_client_from_id(struct list_head *head,
enum vga_switcheroo_client_id client_id)
{
struct vga_switcheroo_client *client;
list_for_each_entry(client, head, list)
if (client->id == client_id)
return client;
return NULL;
}
static struct vga_switcheroo_client *
find_active_client(struct list_head *head)
{
struct vga_switcheroo_client *client;
list_for_each_entry(client, head, list)
vga_switcheroo: Set active attribute to false for audio clients The active attribute in struct vga_switcheroo_client denotes whether the outputs are currently switched to this client. The attribute is only meaningful for vga clients. It is never used for audio clients. The function vga_switcheroo_register_audio_client() misuses this attribute to store whether the audio device is fully initialized. Most likely there was a misunderstanding about the meaning of "active" when this was added. Comment from Takashi's review: "Not really. The full initialization of audio was meant that the audio is active indeed. Admittedly, though, the active flag for each audio client doesn't play any role because the audio always follows the gfx state changes, and the value passed there doesn't reflect the actual state due to the later change. So, I agree with the removal of the flag itself -- or let the audio active flag following the corresponding gfx flag. The latter will make the proc output more consistent while the former is certainly more reduction of code." Set the active attribute to false for audio clients. Remove the active parameter from vga_switcheroo_register_audio_client() and its sole caller, hda_intel.c:register_vga_switcheroo(). vga_switcheroo_register_audio_client() was introduced by 3e9e63dbd374 ("vga_switcheroo: Add the support for audio clients"). Its use in hda_intel.c was introduced by a82d51ed24bb ("ALSA: hda - Support VGA-switcheroo"). v1.1: The changes above imply that in find_active_client() the call to client_is_vga() is now superfluous. Drop it. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> [danvet: Add Takashi's clarification to the commit message.] Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-27 14:43:43 +00:00
if (client->active)
return client;
return NULL;
}
/**
* vga_switcheroo_get_client_state() - obtain power state of a given client
* @pdev: client pci device
*
* Obtain power state of a given client as seen from vga_switcheroo.
* The function is only called from hda_intel.c.
*
* Return: Power state.
*/
enum vga_switcheroo_state vga_switcheroo_get_client_state(struct pci_dev *pdev)
{
struct vga_switcheroo_client *client;
enum vga_switcheroo_state ret;
mutex_lock(&vgasr_mutex);
client = find_client_from_pci(&vgasr_priv.clients, pdev);
if (!client)
ret = VGA_SWITCHEROO_NOT_FOUND;
else
ret = client->pwr_state;
mutex_unlock(&vgasr_mutex);
return ret;
}
EXPORT_SYMBOL(vga_switcheroo_get_client_state);
/**
* vga_switcheroo_unregister_client() - unregister client
* @pdev: client pci device
*
* Unregister client. Disable vga_switcheroo if this is a vga client (GPU).
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
void vga_switcheroo_unregister_client(struct pci_dev *pdev)
{
struct vga_switcheroo_client *client;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
mutex_lock(&vgasr_mutex);
client = find_client_from_pci(&vgasr_priv.clients, pdev);
if (client) {
if (client_is_vga(client))
vgasr_priv.registered_clients--;
list_del(&client->list);
kfree(client);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
if (vgasr_priv.active && vgasr_priv.registered_clients < 2) {
pr_info("disabled\n");
vga_switcheroo_debugfs_fini(&vgasr_priv);
vgasr_priv.active = false;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
mutex_unlock(&vgasr_mutex);
}
EXPORT_SYMBOL(vga_switcheroo_unregister_client);
/**
* vga_switcheroo_client_fb_set() - set framebuffer of a given client
* @pdev: client pci device
* @info: framebuffer
*
* Set framebuffer of a given client. The console will be remapped to this
* on switching.
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
void vga_switcheroo_client_fb_set(struct pci_dev *pdev,
struct fb_info *info)
{
struct vga_switcheroo_client *client;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
mutex_lock(&vgasr_mutex);
client = find_client_from_pci(&vgasr_priv.clients, pdev);
if (client)
client->fb_info = info;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
mutex_unlock(&vgasr_mutex);
}
EXPORT_SYMBOL(vga_switcheroo_client_fb_set);
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
/**
* vga_switcheroo_lock_ddc() - temporarily switch DDC lines to a given client
* @pdev: client pci device
*
* Temporarily switch DDC lines to the client identified by @pdev
* (but leave the outputs otherwise switched to where they are).
* This allows the inactive client to probe EDID. The DDC lines must
* afterwards be switched back by calling vga_switcheroo_unlock_ddc(),
* even if this function returns an error.
*
* Return: Previous DDC owner on success or a negative int on error.
* Specifically, %-ENODEV if no handler has registered or if the handler
* does not support switching the DDC lines. Also, a negative value
* returned by the handler is propagated back to the caller.
* The return value has merely an informational purpose for any caller
* which might be interested in it. It is acceptable to ignore the return
* value and simply rely on the result of the subsequent EDID probe,
* which will be %NULL if DDC switching failed.
*/
int vga_switcheroo_lock_ddc(struct pci_dev *pdev)
{
enum vga_switcheroo_client_id id;
mutex_lock(&vgasr_priv.mux_hw_lock);
if (!vgasr_priv.handler || !vgasr_priv.handler->switch_ddc) {
vgasr_priv.old_ddc_owner = -ENODEV;
return -ENODEV;
}
id = vgasr_priv.handler->get_client_id(pdev);
vgasr_priv.old_ddc_owner = vgasr_priv.handler->switch_ddc(id);
return vgasr_priv.old_ddc_owner;
}
EXPORT_SYMBOL(vga_switcheroo_lock_ddc);
/**
* vga_switcheroo_unlock_ddc() - switch DDC lines back to previous owner
* @pdev: client pci device
*
* Switch DDC lines back to the previous owner after calling
* vga_switcheroo_lock_ddc(). This must be called even if
* vga_switcheroo_lock_ddc() returned an error.
*
* Return: Previous DDC owner on success (i.e. the client identifier of @pdev)
* or a negative int on error.
* Specifically, %-ENODEV if no handler has registered or if the handler
* does not support switching the DDC lines. Also, a negative value
* returned by the handler is propagated back to the caller.
* Finally, invoking this function without calling vga_switcheroo_lock_ddc()
* first is not allowed and will result in %-EINVAL.
*/
int vga_switcheroo_unlock_ddc(struct pci_dev *pdev)
{
enum vga_switcheroo_client_id id;
int ret = vgasr_priv.old_ddc_owner;
if (WARN_ON_ONCE(!mutex_is_locked(&vgasr_priv.mux_hw_lock)))
return -EINVAL;
if (vgasr_priv.old_ddc_owner >= 0) {
id = vgasr_priv.handler->get_client_id(pdev);
if (vgasr_priv.old_ddc_owner != id)
ret = vgasr_priv.handler->switch_ddc(
vgasr_priv.old_ddc_owner);
}
mutex_unlock(&vgasr_priv.mux_hw_lock);
return ret;
}
EXPORT_SYMBOL(vga_switcheroo_unlock_ddc);
/**
* DOC: Manual switching and manual power control
*
* In this mode of use, the file /sys/kernel/debug/vgaswitcheroo/switch
* can be read to retrieve the current vga_switcheroo state and commands
* can be written to it to change the state. The file appears as soon as
* two GPU drivers and one handler have registered with vga_switcheroo.
* The following commands are understood:
*
* * OFF: Power off the device not in use.
* * ON: Power on the device not in use.
* * IGD: Switch to the integrated graphics device.
* Power on the integrated GPU if necessary, power off the discrete GPU.
* Prerequisite is that no user space processes (e.g. Xorg, alsactl)
* have opened device files of the GPUs or the audio client. If the
* switch fails, the user may invoke lsof(8) or fuser(1) on /dev/dri/
* and /dev/snd/controlC1 to identify processes blocking the switch.
* * DIS: Switch to the discrete graphics device.
* * DIGD: Delayed switch to the integrated graphics device.
* This will perform the switch once the last user space process has
* closed the device files of the GPUs and the audio client.
* * DDIS: Delayed switch to the discrete graphics device.
* * MIGD: Mux-only switch to the integrated graphics device.
* Does not remap console or change the power state of either gpu.
* If the integrated GPU is currently off, the screen will turn black.
* If it is on, the screen will show whatever happens to be in VRAM.
* Either way, the user has to blindly enter the command to switch back.
* * MDIS: Mux-only switch to the discrete graphics device.
*
* For GPUs whose power state is controlled by the driver's runtime pm,
* the ON and OFF commands are a no-op (see next section).
*
* For muxless machines, the IGD/DIS, DIGD/DDIS and MIGD/MDIS commands
* should not be used.
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
static int vga_switcheroo_show(struct seq_file *m, void *v)
{
struct vga_switcheroo_client *client;
int i = 0;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
mutex_lock(&vgasr_mutex);
list_for_each_entry(client, &vgasr_priv.clients, list) {
seq_printf(m, "%d:%s%s:%c:%s%s:%s\n", i,
client_id(client) == VGA_SWITCHEROO_DIS ? "DIS" :
"IGD",
client_is_vga(client) ? "" : "-Audio",
client->active ? '+' : ' ',
client->driver_power_control ? "Dyn" : "",
client->pwr_state ? "Pwr" : "Off",
pci_name(client->pdev));
i++;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
mutex_unlock(&vgasr_mutex);
return 0;
}
static int vga_switcheroo_debugfs_open(struct inode *inode, struct file *file)
{
return single_open(file, vga_switcheroo_show, NULL);
}
static int vga_switchon(struct vga_switcheroo_client *client)
{
if (client->driver_power_control)
return 0;
if (vgasr_priv.handler->power_state)
vgasr_priv.handler->power_state(client->id, VGA_SWITCHEROO_ON);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/* call the driver callback to turn on device */
client->ops->set_gpu_state(client->pdev, VGA_SWITCHEROO_ON);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
client->pwr_state = VGA_SWITCHEROO_ON;
return 0;
}
static int vga_switchoff(struct vga_switcheroo_client *client)
{
if (client->driver_power_control)
return 0;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/* call the driver callback to turn off device */
client->ops->set_gpu_state(client->pdev, VGA_SWITCHEROO_OFF);
if (vgasr_priv.handler->power_state)
vgasr_priv.handler->power_state(client->id, VGA_SWITCHEROO_OFF);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
client->pwr_state = VGA_SWITCHEROO_OFF;
return 0;
}
static void set_audio_state(enum vga_switcheroo_client_id id,
enum vga_switcheroo_state state)
{
struct vga_switcheroo_client *client;
client = find_client_from_id(&vgasr_priv.clients, id | ID_BIT_AUDIO);
if (client && client->pwr_state != state) {
client->ops->set_gpu_state(client->pdev, state);
client->pwr_state = state;
}
}
/* stage one happens before delay */
static int vga_switchto_stage1(struct vga_switcheroo_client *new_client)
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
{
struct vga_switcheroo_client *active;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
active = find_active_client(&vgasr_priv.clients);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (!active)
return 0;
if (new_client->pwr_state == VGA_SWITCHEROO_OFF)
vga_switchon(new_client);
vga_set_default_device(new_client->pdev);
return 0;
}
/* post delay */
static int vga_switchto_stage2(struct vga_switcheroo_client *new_client)
{
int ret;
struct vga_switcheroo_client *active;
active = find_active_client(&vgasr_priv.clients);
if (!active)
return 0;
active->active = false;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
set_audio_state(active->id, VGA_SWITCHEROO_OFF);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (new_client->fb_info) {
struct fb_event event;
console_lock();
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
event.info = new_client->fb_info;
fb_notifier_call_chain(FB_EVENT_REMAP_ALL_CONSOLE, &event);
console_unlock();
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
mutex_lock(&vgasr_priv.mux_hw_lock);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
ret = vgasr_priv.handler->switchto(new_client->id);
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
mutex_unlock(&vgasr_priv.mux_hw_lock);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (ret)
return ret;
if (new_client->ops->reprobe)
new_client->ops->reprobe(new_client->pdev);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (active->pwr_state == VGA_SWITCHEROO_ON)
vga_switchoff(active);
set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
new_client->active = true;
return 0;
}
static bool check_can_switch(void)
{
struct vga_switcheroo_client *client;
list_for_each_entry(client, &vgasr_priv.clients, list) {
if (!client->ops->can_switch(client->pdev)) {
pr_err("client %x refused switch\n", client->id);
return false;
}
}
return true;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
static ssize_t
vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf,
size_t cnt, loff_t *ppos)
{
char usercmd[64];
int ret;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
bool delay = false, can_switch;
bool just_mux = false;
enum vga_switcheroo_client_id client_id = VGA_SWITCHEROO_UNKNOWN_ID;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
struct vga_switcheroo_client *client = NULL;
if (cnt > 63)
cnt = 63;
if (copy_from_user(usercmd, ubuf, cnt))
return -EFAULT;
mutex_lock(&vgasr_mutex);
if (!vgasr_priv.active) {
cnt = -EINVAL;
goto out;
}
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/* pwr off the device not in use */
if (strncmp(usercmd, "OFF", 3) == 0) {
list_for_each_entry(client, &vgasr_priv.clients, list) {
if (client->active || client_is_audio(client))
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
continue;
if (client->driver_power_control)
continue;
set_audio_state(client->id, VGA_SWITCHEROO_OFF);
if (client->pwr_state == VGA_SWITCHEROO_ON)
vga_switchoff(client);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
goto out;
}
/* pwr on the device not in use */
if (strncmp(usercmd, "ON", 2) == 0) {
list_for_each_entry(client, &vgasr_priv.clients, list) {
if (client->active || client_is_audio(client))
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
continue;
if (client->driver_power_control)
continue;
if (client->pwr_state == VGA_SWITCHEROO_OFF)
vga_switchon(client);
set_audio_state(client->id, VGA_SWITCHEROO_ON);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
goto out;
}
/* request a delayed switch - test can we switch now */
if (strncmp(usercmd, "DIGD", 4) == 0) {
client_id = VGA_SWITCHEROO_IGD;
delay = true;
}
if (strncmp(usercmd, "DDIS", 4) == 0) {
client_id = VGA_SWITCHEROO_DIS;
delay = true;
}
if (strncmp(usercmd, "IGD", 3) == 0)
client_id = VGA_SWITCHEROO_IGD;
if (strncmp(usercmd, "DIS", 3) == 0)
client_id = VGA_SWITCHEROO_DIS;
if (strncmp(usercmd, "MIGD", 4) == 0) {
just_mux = true;
client_id = VGA_SWITCHEROO_IGD;
}
if (strncmp(usercmd, "MDIS", 4) == 0) {
just_mux = true;
client_id = VGA_SWITCHEROO_DIS;
}
if (client_id == VGA_SWITCHEROO_UNKNOWN_ID)
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
goto out;
client = find_client_from_id(&vgasr_priv.clients, client_id);
if (!client)
goto out;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
vgasr_priv.delayed_switch_active = false;
if (just_mux) {
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
mutex_lock(&vgasr_priv.mux_hw_lock);
ret = vgasr_priv.handler->switchto(client_id);
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
mutex_unlock(&vgasr_priv.mux_hw_lock);
goto out;
}
if (client->active)
goto out;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/* okay we want a switch - test if devices are willing to switch */
can_switch = check_can_switch();
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (can_switch == false && delay == false)
goto out;
if (can_switch) {
ret = vga_switchto_stage1(client);
if (ret)
pr_err("switching failed stage 1 %d\n", ret);
ret = vga_switchto_stage2(client);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (ret)
pr_err("switching failed stage 2 %d\n", ret);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
} else {
pr_info("setting delayed switch to client %d\n", client->id);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
vgasr_priv.delayed_switch_active = true;
vgasr_priv.delayed_client_id = client_id;
ret = vga_switchto_stage1(client);
if (ret)
pr_err("delayed switching stage 1 failed %d\n", ret);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
out:
mutex_unlock(&vgasr_mutex);
return cnt;
}
static const struct file_operations vga_switcheroo_debugfs_fops = {
.owner = THIS_MODULE,
.open = vga_switcheroo_debugfs_open,
.write = vga_switcheroo_debugfs_write,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void vga_switcheroo_debugfs_fini(struct vgasr_priv *priv)
{
debugfs_remove(priv->switch_file);
priv->switch_file = NULL;
debugfs_remove(priv->debugfs_root);
priv->debugfs_root = NULL;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
}
static int vga_switcheroo_debugfs_init(struct vgasr_priv *priv)
{
static const char mp[] = "/sys/kernel/debug";
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
/* already initialised */
if (priv->debugfs_root)
return 0;
priv->debugfs_root = debugfs_create_dir("vgaswitcheroo", NULL);
if (!priv->debugfs_root) {
pr_err("Cannot create %s/vgaswitcheroo\n", mp);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
goto fail;
}
priv->switch_file = debugfs_create_file("switch", 0644,
priv->debugfs_root, NULL,
&vga_switcheroo_debugfs_fops);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (!priv->switch_file) {
pr_err("cannot create %s/vgaswitcheroo/switch\n", mp);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
goto fail;
}
return 0;
fail:
vga_switcheroo_debugfs_fini(priv);
return -1;
}
/**
* vga_switcheroo_process_delayed_switch() - helper for delayed switching
*
* Process a delayed switch if one is pending. DRM drivers should call this
* from their ->lastclose callback.
*
* Return: 0 on success. -EINVAL if no delayed switch is pending, if the client
* has unregistered in the meantime or if there are other clients blocking the
* switch. If the actual switch fails, an error is reported and 0 is returned.
*/
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
int vga_switcheroo_process_delayed_switch(void)
{
struct vga_switcheroo_client *client;
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
int ret;
int err = -EINVAL;
mutex_lock(&vgasr_mutex);
if (!vgasr_priv.delayed_switch_active)
goto err;
pr_info("processing delayed switch to %d\n",
vgasr_priv.delayed_client_id);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
client = find_client_from_id(&vgasr_priv.clients,
vgasr_priv.delayed_client_id);
if (!client || !check_can_switch())
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
goto err;
ret = vga_switchto_stage2(client);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
if (ret)
pr_err("delayed switching failed stage 2 %d\n", ret);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 05:38:10 +00:00
vgasr_priv.delayed_switch_active = false;
err = 0;
err:
mutex_unlock(&vgasr_mutex);
return err;
}
EXPORT_SYMBOL(vga_switcheroo_process_delayed_switch);
/**
* DOC: Driver power control
*
* In this mode of use, the discrete GPU automatically powers up and down at
* the discretion of the driver's runtime pm. On muxed machines, the user may
* still influence the muxer state by way of the debugfs interface, however
* the ON and OFF commands become a no-op for the discrete GPU.
*
* This mode is the default on Nvidia HybridPower/Optimus and ATI PowerXpress.
* Specifying nouveau.runpm=0, radeon.runpm=0 or amdgpu.runpm=0 on the kernel
* command line disables it.
*
* When the driver decides to power up or down, it notifies vga_switcheroo
* thereof so that it can (a) power the audio device on the GPU up or down,
* and (b) update its internal power state representation for the device.
* This is achieved by vga_switcheroo_set_dynamic_switch().
*
* After the GPU has been suspended, the handler needs to be called to cut
* power to the GPU. Likewise it needs to reinstate power before the GPU
* can resume. This is achieved by vga_switcheroo_init_domain_pm_ops(),
* which augments the GPU's suspend/resume functions by the requisite
* calls to the handler.
*
* When the audio device resumes, the GPU needs to be woken. This is achieved
* by vga_switcheroo_init_domain_pm_optimus_hdmi_audio(), which augments the
* audio device's resume function.
*
* On muxed machines, if the mux is initially switched to the discrete GPU,
* the user ends up with a black screen when the GPU powers down after boot.
* As a workaround, the mux is forced to the integrated GPU on runtime suspend,
* cf. https://bugs.freedesktop.org/show_bug.cgi?id=75917
*/
static void vga_switcheroo_power_switch(struct pci_dev *pdev,
enum vga_switcheroo_state state)
{
struct vga_switcheroo_client *client;
if (!vgasr_priv.handler->power_state)
return;
client = find_client_from_pci(&vgasr_priv.clients, pdev);
if (!client)
return;
if (!client->driver_power_control)
return;
vgasr_priv.handler->power_state(client->id, state);
}
/**
* vga_switcheroo_set_dynamic_switch() - helper for driver power control
* @pdev: client pci device
* @dynamic: new power state
*
* Helper for GPUs whose power state is controlled by the driver's runtime pm.
* When the driver decides to power up or down, it notifies vga_switcheroo
* thereof using this helper so that it can (a) power the audio device on
* the GPU up or down, and (b) update its internal power state representation
* for the device.
*/
void vga_switcheroo_set_dynamic_switch(struct pci_dev *pdev,
enum vga_switcheroo_state dynamic)
{
struct vga_switcheroo_client *client;
mutex_lock(&vgasr_mutex);
client = find_client_from_pci(&vgasr_priv.clients, pdev);
if (!client || !client->driver_power_control) {
mutex_unlock(&vgasr_mutex);
return;
}
client->pwr_state = dynamic;
set_audio_state(client->id, dynamic);
mutex_unlock(&vgasr_mutex);
}
EXPORT_SYMBOL(vga_switcheroo_set_dynamic_switch);
/* switcheroo power domain */
static int vga_switcheroo_runtime_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
int ret;
ret = dev->bus->pm->runtime_suspend(dev);
if (ret)
return ret;
mutex_lock(&vgasr_mutex);
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
if (vgasr_priv.handler->switchto) {
mutex_lock(&vgasr_priv.mux_hw_lock);
vgasr_priv.handler->switchto(VGA_SWITCHEROO_IGD);
vga_switcheroo: Add support for switching only the DDC Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: During graphics driver initialization it's useful to be able to mux only the DDC to the inactive client in order to read the EDID. Add a switch_ddc callback to allow capable handlers to provide this functionality, and add vga_switcheroo_switch_ddc() to allow DRM to mux only the DDC. Modified by Dave Airlie <airlied@gmail.com>, 2012-12-22: I can't figure out why I didn't like this, but I rewrote this [...] to lock/unlock the ddc lines [...]. I think I'd prefer something like that otherwise the interface got really ugly. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-10: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() but this fails if the inactive client registers before the active client. Don't lock vgasr_mutex in _lock_ddc() / _unlock_ddc(), it can cause deadlocks because (a) during switch (with vgasr_mutex already held), GPU is woken and probes its outputs, tries to re-acquire vgasr_mutex to lock DDC lines; (b) Likewise during switch, GPU is suspended and calls cancel_delayed_work_sync() to stop output polling, if poll task is running at this moment we may wait forever for it to finish. Instead, lock mux_hw_lock when unregistering the handler because the only reason why we'd want to lock vgasr_mutex in _lock_ddc() / _unlock_ddc() is to block the handler from disappearing while DDC lines are switched. Also acquire mux_hw_lock in stage2 to avoid race condition where reading the EDID and switching happens simultaneously. Likewise on MIGD / MDIS commands and on runtime suspend. v2.1: Overhaul locking, squash commits (Daniel Vetter) v2.2: Readability improvements (Thierry Reding) v2.3: Overhaul locking once more v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v5: Rename ddc_lock to mux_hw_lock: Since we acquire this both when calling ->switch_ddc and ->switchto, it protects not just access to the DDC lines but to the mux in general. This is in line with the DRM convention to use low-level locks to avoid concurrent hw access (e.g. i2c, dp_aux) which are often called hw_lock (Daniel Vetter) Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/e81ae9722b84c5ed591805fee3ea6dbf5dc6c4b3.1452525860.git.lukas@wunner.de
2016-01-11 19:09:20 +00:00
mutex_unlock(&vgasr_priv.mux_hw_lock);
}
vga_switcheroo_power_switch(pdev, VGA_SWITCHEROO_OFF);
mutex_unlock(&vgasr_mutex);
return 0;
}
static int vga_switcheroo_runtime_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
int ret;
mutex_lock(&vgasr_mutex);
vga_switcheroo_power_switch(pdev, VGA_SWITCHEROO_ON);
mutex_unlock(&vgasr_mutex);
ret = dev->bus->pm->runtime_resume(dev);
if (ret)
return ret;
return 0;
}
/**
* vga_switcheroo_init_domain_pm_ops() - helper for driver power control
* @dev: vga client device
* @domain: power domain
*
* Helper for GPUs whose power state is controlled by the driver's runtime pm.
* After the GPU has been suspended, the handler needs to be called to cut
* power to the GPU. Likewise it needs to reinstate power before the GPU
* can resume. To this end, this helper augments the suspend/resume functions
* by the requisite calls to the handler. It needs only be called on platforms
* where the power switch is separate to the device being powered down.
*/
int vga_switcheroo_init_domain_pm_ops(struct device *dev,
struct dev_pm_domain *domain)
{
/* copy over all the bus versions */
if (dev->bus && dev->bus->pm) {
domain->ops = *dev->bus->pm;
domain->ops.runtime_suspend = vga_switcheroo_runtime_suspend;
domain->ops.runtime_resume = vga_switcheroo_runtime_resume;
dev_pm_domain_set(dev, domain);
return 0;
}
dev_pm_domain_set(dev, NULL);
return -EINVAL;
}
EXPORT_SYMBOL(vga_switcheroo_init_domain_pm_ops);
void vga_switcheroo_fini_domain_pm_ops(struct device *dev)
{
dev_pm_domain_set(dev, NULL);
}
EXPORT_SYMBOL(vga_switcheroo_fini_domain_pm_ops);
static int vga_switcheroo_runtime_resume_hdmi_audio(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct vga_switcheroo_client *client;
struct device *video_dev = NULL;
int ret;
/* we need to check if we have to switch back on the video
device so the audio device can come back */
mutex_lock(&vgasr_mutex);
list_for_each_entry(client, &vgasr_priv.clients, list) {
if (PCI_SLOT(client->pdev->devfn) == PCI_SLOT(pdev->devfn) &&
client_is_vga(client)) {
video_dev = &client->pdev->dev;
break;
}
}
mutex_unlock(&vgasr_mutex);
if (video_dev) {
ret = pm_runtime_get_sync(video_dev);
if (ret && ret != 1)
return ret;
}
ret = dev->bus->pm->runtime_resume(dev);
/* put the reference for the gpu */
if (video_dev) {
pm_runtime_mark_last_busy(video_dev);
pm_runtime_put_autosuspend(video_dev);
}
return ret;
}
/**
* vga_switcheroo_init_domain_pm_optimus_hdmi_audio() - helper for driver
* power control
* @dev: audio client device
* @domain: power domain
*
* Helper for GPUs whose power state is controlled by the driver's runtime pm.
* When the audio device resumes, the GPU needs to be woken. This helper
* augments the audio device's resume function to do that.
*
* Return: 0 on success, -EINVAL if no power management operations are
* defined for this device.
*/
int
vga_switcheroo_init_domain_pm_optimus_hdmi_audio(struct device *dev,
struct dev_pm_domain *domain)
{
/* copy over all the bus versions */
if (dev->bus && dev->bus->pm) {
domain->ops = *dev->bus->pm;
domain->ops.runtime_resume =
vga_switcheroo_runtime_resume_hdmi_audio;
dev_pm_domain_set(dev, domain);
return 0;
}
dev_pm_domain_set(dev, NULL);
return -EINVAL;
}
EXPORT_SYMBOL(vga_switcheroo_init_domain_pm_optimus_hdmi_audio);