linux/drivers/acpi/acpica/hwxfsleep.c

/******************************************************************************
 *
 * Name: hwxfsleep.c - ACPI Hardware Sleep/Wake External Interfaces
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2016, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#define EXPORT_ACPI_INTERFACES

#include <acpi/acpi.h>
#include "accommon.h"

#define _COMPONENT          ACPI_HARDWARE
ACPI_MODULE_NAME("hwxfsleep")

/* Local prototypes */
#if (!ACPI_REDUCED_HARDWARE)
static acpi_status
acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs,
				   acpi_physical_address physical_address,
				   acpi_physical_address physical_address64);
#endif

static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);

/*
 * Dispatch table used to efficiently branch to the various sleep
 * functions.
 */
#define ACPI_SLEEP_FUNCTION_ID         0
#define ACPI_WAKE_PREP_FUNCTION_ID     1
#define ACPI_WAKE_FUNCTION_ID          2

/* Legacy functions are optional, based upon ACPI_REDUCED_HARDWARE */

static struct acpi_sleep_functions acpi_sleep_dispatch[] = {
	{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_sleep),
	 acpi_hw_extended_sleep},
	{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake_prep),
	 acpi_hw_extended_wake_prep},
	{ACPI_HW_OPTIONAL_FUNCTION(acpi_hw_legacy_wake), acpi_hw_extended_wake}
};

/*
 * These functions are removed for the ACPI_REDUCED_HARDWARE case:
 *      acpi_set_firmware_waking_vector
 *      acpi_enter_sleep_state_s4bios
 */

#if (!ACPI_REDUCED_HARDWARE)
/*******************************************************************************
 *
 * FUNCTION:    acpi_hw_set_firmware_waking_vector
 *
 * PARAMETERS:  facs                - Pointer to FACS table
 *              physical_address    - 32-bit physical address of ACPI real mode
 *                                    entry point
 *              physical_address64  - 64-bit physical address of ACPI protected
 *                                    mode entry point
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
 *
 ******************************************************************************/

static acpi_status
acpi_hw_set_firmware_waking_vector(struct acpi_table_facs *facs,
				   acpi_physical_address physical_address,
				   acpi_physical_address physical_address64)
{
	ACPI_FUNCTION_TRACE(acpi_hw_set_firmware_waking_vector);


	/*
	 * According to the ACPI specification 2.0c and later, the 64-bit
	 * waking vector should be cleared and the 32-bit waking vector should
	 * be used, unless we want the wake-up code to be called by the BIOS in
	 * Protected Mode.  Some systems (for example HP dv5-1004nr) are known
	 * to fail to resume if the 64-bit vector is used.
	 */

	/* Set the 32-bit vector */

	facs->firmware_waking_vector = (u32)physical_address;

	if (facs->length > 32) {
		if (facs->version >= 1) {

			/* Set the 64-bit vector */

			facs->xfirmware_waking_vector = physical_address64;
		} else {
			/* Clear the 64-bit vector if it exists */

			facs->xfirmware_waking_vector = 0;
		}
	}

	return_ACPI_STATUS(AE_OK);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_set_firmware_waking_vector
 *
 * PARAMETERS:  physical_address    - 32-bit physical address of ACPI real mode
 *                                    entry point
 *              physical_address64  - 64-bit physical address of ACPI protected
 *                                    mode entry point
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Sets the firmware_waking_vector fields of the FACS
 *
 ******************************************************************************/

acpi_status
acpi_set_firmware_waking_vector(acpi_physical_address physical_address,
				acpi_physical_address physical_address64)
{

	ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);

	if (acpi_gbl_FACS) {
		(void)acpi_hw_set_firmware_waking_vector(acpi_gbl_FACS,
							 physical_address,
							 physical_address64);
	}

	return_ACPI_STATUS(AE_OK);
}

ACPI_EXPORT_SYMBOL(acpi_set_firmware_waking_vector)

/*******************************************************************************
 *
 * FUNCTION:    acpi_enter_sleep_state_s4bios
 *
 * PARAMETERS:  None
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Perform a S4 bios request.
 *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
 *
 ******************************************************************************/
acpi_status acpi_enter_sleep_state_s4bios(void)
{
	u32 in_value;
	acpi_status status;

	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);

	/* Clear the wake status bit (PM1) */

	status =
	    acpi_write_bit_register(ACPI_BITREG_WAKE_STATUS, ACPI_CLEAR_STATUS);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	status = acpi_hw_clear_acpi_status();
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/*
	 * 1) Disable/Clear all GPEs
	 * 2) Enable all wakeup GPEs
	 */
	status = acpi_hw_disable_all_gpes();
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}
	acpi_gbl_system_awake_and_running = FALSE;

	status = acpi_hw_enable_all_wakeup_gpes();
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	ACPI_FLUSH_CPU_CACHE();

	status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
				    (u32)acpi_gbl_FADT.s4_bios_request, 8);

	do {
		acpi_os_stall(ACPI_USEC_PER_MSEC);
		status =
		    acpi_read_bit_register(ACPI_BITREG_WAKE_STATUS, &in_value);
		if (ACPI_FAILURE(status)) {
			return_ACPI_STATUS(status);
		}

	} while (!in_value);

	return_ACPI_STATUS(AE_OK);
}

ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
#endif				/* !ACPI_REDUCED_HARDWARE */
/*******************************************************************************
 *
 * FUNCTION:    acpi_hw_sleep_dispatch
 *
 * PARAMETERS:  sleep_state         - Which sleep state to enter/exit
 *              function_id         - Sleep, wake_prep, or Wake
 *
 * RETURN:      Status from the invoked sleep handling function.
 *
 * DESCRIPTION: Dispatch a sleep/wake request to the appropriate handling
 *              function.
 *
 ******************************************************************************/
static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
{
	acpi_status status;
	struct acpi_sleep_functions *sleep_functions =
	    &acpi_sleep_dispatch[function_id];

#if (!ACPI_REDUCED_HARDWARE)
	/*
	 * If the Hardware Reduced flag is set (from the FADT), we must
	 * use the extended sleep registers (FADT). Note: As per the ACPI
	 * specification, these extended registers are to be used for HW-reduced
	 * platforms only. They are not general-purpose replacements for the
	 * legacy PM register sleep support.
	 */
	if (acpi_gbl_reduced_hardware) {
		status = sleep_functions->extended_function(sleep_state);
	} else {
		/* Legacy sleep */

		status = sleep_functions->legacy_function(sleep_state);
	}

	return (status);

#else
	/*
	 * For the case where reduced-hardware-only code is being generated,
	 * we know that only the extended sleep registers are available
	 */
	status = sleep_functions->extended_function(sleep_state);
	return (status);

#endif				/* !ACPI_REDUCED_HARDWARE */
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_enter_sleep_state_prep
 *
 * PARAMETERS:  sleep_state         - Which sleep state to enter
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Prepare to enter a system sleep state.
 *              This function must execute with interrupts enabled.
 *              We break sleeping into 2 stages so that OSPM can handle
 *              various OS-specific tasks between the two steps.
 *
 ******************************************************************************/

acpi_status acpi_enter_sleep_state_prep(u8 sleep_state)
{
	acpi_status status;
	struct acpi_object_list arg_list;
	union acpi_object arg;
	u32 sst_value;

	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_prep);

	status = acpi_get_sleep_type_data(sleep_state,
					  &acpi_gbl_sleep_type_a,
					  &acpi_gbl_sleep_type_b);
	if (ACPI_FAILURE(status)) {
		return_ACPI_STATUS(status);
	}

	/* Execute the _PTS method (Prepare To Sleep) */

	arg_list.count = 1;
	arg_list.pointer = &arg;
	arg.type = ACPI_TYPE_INTEGER;
	arg.integer.value = sleep_state;

	status =
	    acpi_evaluate_object(NULL, METHOD_PATHNAME__PTS, &arg_list, NULL);
	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
		return_ACPI_STATUS(status);
	}

	/* Setup the argument to the _SST method (System STatus) */

	switch (sleep_state) {
	case ACPI_STATE_S0:

		sst_value = ACPI_SST_WORKING;
		break;

	case ACPI_STATE_S1:
	case ACPI_STATE_S2:
	case ACPI_STATE_S3:

		sst_value = ACPI_SST_SLEEPING;
		break;

	case ACPI_STATE_S4:

		sst_value = ACPI_SST_SLEEP_CONTEXT;
		break;

	default:

		sst_value = ACPI_SST_INDICATOR_OFF;	/* Default is off */
		break;
	}

	/*
	 * Set the system indicators to show the desired sleep state.
	 * _SST is an optional method (return no error if not found)
	 */
	acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, sst_value);
	return_ACPI_STATUS(AE_OK);
}

ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)

/*******************************************************************************
 *
 * FUNCTION:    acpi_enter_sleep_state
 *
 * PARAMETERS:  sleep_state         - Which sleep state to enter
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Enter a system sleep state
 *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
 *
 ******************************************************************************/
acpi_status acpi_enter_sleep_state(u8 sleep_state)
{
	acpi_status status;

	ACPI_FUNCTION_TRACE(acpi_enter_sleep_state);

	if ((acpi_gbl_sleep_type_a > ACPI_SLEEP_TYPE_MAX) ||
	    (acpi_gbl_sleep_type_b > ACPI_SLEEP_TYPE_MAX)) {
		ACPI_ERROR((AE_INFO, "Sleep values out of range: A=0x%X B=0x%X",
			    acpi_gbl_sleep_type_a, acpi_gbl_sleep_type_b));
		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
	}

	status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
	return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)

/*******************************************************************************
 *
 * FUNCTION:    acpi_leave_sleep_state_prep
 *
 * PARAMETERS:  sleep_state         - Which sleep state we are exiting
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Perform the first state of OS-independent ACPI cleanup after a
 *              sleep. Called with interrupts DISABLED.
 *              We break wake/resume into 2 stages so that OSPM can handle
 *              various OS-specific tasks between the two steps.
 *
 ******************************************************************************/
acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
{
	acpi_status status;

	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);

	status =
	    acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID);
	return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state_prep)

/*******************************************************************************
 *
 * FUNCTION:    acpi_leave_sleep_state
 *
 * PARAMETERS:  sleep_state         - Which sleep state we are exiting
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Perform OS-independent ACPI cleanup after a sleep
 *              Called with interrupts ENABLED.
 *
 ******************************************************************************/
acpi_status acpi_leave_sleep_state(u8 sleep_state)
{
	acpi_status status;

	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state);

	status = acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_FUNCTION_ID);
	return_ACPI_STATUS(status);
}

ACPI_EXPORT_SYMBOL(acpi_leave_sleep_state)