linux/scripts/mod/file2alias.c

1164 lines
34 KiB
C
Raw Normal View History

/* Simple code to turn various tables in an ELF file into alias definitions.
* This deals with kernel datastructures where they should be
* dealt with: in the kernel source.
*
* Copyright 2002-2003 Rusty Russell, IBM Corporation
* 2003 Kai Germaschewski
*
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*/
#include "modpost.h"
/* We use the ELF typedefs for kernel_ulong_t but bite the bullet and
* use either stdint.h or inttypes.h for the rest. */
#if KERNEL_ELFCLASS == ELFCLASS32
typedef Elf32_Addr kernel_ulong_t;
#define BITS_PER_LONG 32
#else
typedef Elf64_Addr kernel_ulong_t;
#define BITS_PER_LONG 64
#endif
#ifdef __sun__
#include <inttypes.h>
#else
#include <stdint.h>
#endif
#include <ctype.h>
#include <stdbool.h>
typedef uint32_t __u32;
typedef uint16_t __u16;
typedef unsigned char __u8;
/* Big exception to the "don't include kernel headers into userspace, which
* even potentially has different endianness and word sizes, since
* we handle those differences explicitly below */
#include "../../include/linux/mod_devicetable.h"
/* This array collects all instances that use the generic do_table */
struct devtable {
const char *device_id; /* name of table, __mod_<name>_device_table. */
unsigned long id_size;
void *function;
};
#define ___cat(a,b) a ## b
#define __cat(a,b) ___cat(a,b)
/* we need some special handling for this host tool running eventually on
* Darwin. The Mach-O section handling is a bit different than ELF section
* handling. The differnces in detail are:
* a) we have segments which have sections
* b) we need a API call to get the respective section symbols */
#if defined(__MACH__)
#include <mach-o/getsect.h>
#define INIT_SECTION(name) do { \
unsigned long name ## _len; \
char *__cat(pstart_,name) = getsectdata("__TEXT", \
#name, &__cat(name,_len)); \
char *__cat(pstop_,name) = __cat(pstart_,name) + \
__cat(name, _len); \
__cat(__start_,name) = (void *)__cat(pstart_,name); \
__cat(__stop_,name) = (void *)__cat(pstop_,name); \
} while (0)
#define SECTION(name) __attribute__((section("__TEXT, " #name)))
struct devtable **__start___devtable, **__stop___devtable;
#else
#define INIT_SECTION(name) /* no-op for ELF */
#define SECTION(name) __attribute__((section(#name)))
/* We construct a table of pointers in an ELF section (pointers generally
* go unpadded by gcc). ld creates boundary syms for us. */
extern struct devtable *__start___devtable[], *__stop___devtable[];
#endif /* __MACH__ */
#if __GNUC__ == 3 && __GNUC_MINOR__ < 3
# define __used __attribute__((__unused__))
#else
# define __used __attribute__((__used__))
#endif
/* Add a table entry. We test function type matches while we're here. */
#define ADD_TO_DEVTABLE(device_id, type, function) \
static struct devtable __cat(devtable,__LINE__) = { \
device_id + 0*sizeof((function)((const char *)NULL, \
(type *)NULL, \
(char *)NULL)), \
sizeof(type), (function) }; \
static struct devtable *SECTION(__devtable) __used \
__cat(devtable_ptr,__LINE__) = &__cat(devtable,__LINE__)
#define ADD(str, sep, cond, field) \
do { \
strcat(str, sep); \
if (cond) \
sprintf(str + strlen(str), \
sizeof(field) == 1 ? "%02X" : \
sizeof(field) == 2 ? "%04X" : \
sizeof(field) == 4 ? "%08X" : "", \
field); \
else \
sprintf(str + strlen(str), "*"); \
} while(0)
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
/* Always end in a wildcard, for future extension */
static inline void add_wildcard(char *str)
{
int len = strlen(str);
if (str[len - 1] != '*')
strcat(str + len, "*");
}
unsigned int cross_build = 0;
/**
* Check that sizeof(device_id type) are consistent with size of section
* in .o file. If in-consistent then userspace and kernel does not agree
* on actual size which is a bug.
* Also verify that the final entry in the table is all zeros.
* Ignore both checks if build host differ from target host and size differs.
**/
static void device_id_check(const char *modname, const char *device_id,
unsigned long size, unsigned long id_size,
void *symval)
{
int i;
if (size % id_size || size < id_size) {
if (cross_build != 0)
return;
fatal("%s: sizeof(struct %s_device_id)=%lu is not a modulo "
"of the size of section __mod_%s_device_table=%lu.\n"
"Fix definition of struct %s_device_id "
"in mod_devicetable.h\n",
modname, device_id, id_size, device_id, size, device_id);
}
/* Verify last one is a terminator */
for (i = 0; i < id_size; i++ ) {
if (*(uint8_t*)(symval+size-id_size+i)) {
fprintf(stderr,"%s: struct %s_device_id is %lu bytes. "
"The last of %lu is:\n",
modname, device_id, id_size, size / id_size);
for (i = 0; i < id_size; i++ )
fprintf(stderr,"0x%02x ",
*(uint8_t*)(symval+size-id_size+i) );
fprintf(stderr,"\n");
fatal("%s: struct %s_device_id is not terminated "
"with a NULL entry!\n", modname, device_id);
}
}
}
2005-04-22 22:07:01 +00:00
/* USB is special because the bcdDevice can be matched against a numeric range */
/* Looks like "usb:vNpNdNdcNdscNdpNicNiscNipNinN" */
2005-04-22 22:07:01 +00:00
static void do_usb_entry(struct usb_device_id *id,
unsigned int bcdDevice_initial, int bcdDevice_initial_digits,
unsigned char range_lo, unsigned char range_hi,
unsigned char max, struct module *mod)
{
2005-04-22 22:07:01 +00:00
char alias[500];
strcpy(alias, "usb:");
ADD(alias, "v", id->match_flags&USB_DEVICE_ID_MATCH_VENDOR,
id->idVendor);
ADD(alias, "p", id->match_flags&USB_DEVICE_ID_MATCH_PRODUCT,
id->idProduct);
2005-04-22 22:07:01 +00:00
strcat(alias, "d");
if (bcdDevice_initial_digits)
sprintf(alias + strlen(alias), "%0*X",
bcdDevice_initial_digits, bcdDevice_initial);
if (range_lo == range_hi)
sprintf(alias + strlen(alias), "%X", range_lo);
else if (range_lo > 0 || range_hi < max) {
if (range_lo > 0x9 || range_hi < 0xA)
sprintf(alias + strlen(alias),
"[%X-%X]",
range_lo,
range_hi);
else {
sprintf(alias + strlen(alias),
range_lo < 0x9 ? "[%X-9" : "[%X",
range_lo);
sprintf(alias + strlen(alias),
range_hi > 0xA ? "a-%X]" : "%X]",
range_lo);
}
}
2005-04-22 22:07:01 +00:00
if (bcdDevice_initial_digits < (sizeof(id->bcdDevice_lo) * 2 - 1))
strcat(alias, "*");
ADD(alias, "dc", id->match_flags&USB_DEVICE_ID_MATCH_DEV_CLASS,
id->bDeviceClass);
ADD(alias, "dsc",
id->match_flags&USB_DEVICE_ID_MATCH_DEV_SUBCLASS,
id->bDeviceSubClass);
ADD(alias, "dp",
id->match_flags&USB_DEVICE_ID_MATCH_DEV_PROTOCOL,
id->bDeviceProtocol);
ADD(alias, "ic",
id->match_flags&USB_DEVICE_ID_MATCH_INT_CLASS,
id->bInterfaceClass);
ADD(alias, "isc",
id->match_flags&USB_DEVICE_ID_MATCH_INT_SUBCLASS,
id->bInterfaceSubClass);
ADD(alias, "ip",
id->match_flags&USB_DEVICE_ID_MATCH_INT_PROTOCOL,
id->bInterfaceProtocol);
ADD(alias, "in",
id->match_flags&USB_DEVICE_ID_MATCH_INT_NUMBER,
id->bInterfaceNumber);
2005-04-22 22:07:01 +00:00
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
2005-04-22 22:07:01 +00:00
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"%s\");\n", alias);
}
/* Handles increment/decrement of BCD formatted integers */
/* Returns the previous value, so it works like i++ or i-- */
static unsigned int incbcd(unsigned int *bcd,
int inc,
unsigned char max,
size_t chars)
{
unsigned int init = *bcd, i, j;
unsigned long long c, dec = 0;
/* If bcd is not in BCD format, just increment */
if (max > 0x9) {
*bcd += inc;
return init;
}
/* Convert BCD to Decimal */
for (i=0 ; i < chars ; i++) {
c = (*bcd >> (i << 2)) & 0xf;
c = c > 9 ? 9 : c; /* force to bcd just in case */
for (j=0 ; j < i ; j++)
c = c * 10;
dec += c;
}
/* Do our increment/decrement */
dec += inc;
*bcd = 0;
/* Convert back to BCD */
for (i=0 ; i < chars ; i++) {
for (c=1,j=0 ; j < i ; j++)
c = c * 10;
c = (dec / c) % 10;
*bcd += c << (i << 2);
}
return init;
}
2005-04-22 22:07:01 +00:00
static void do_usb_entry_multi(struct usb_device_id *id, struct module *mod)
{
unsigned int devlo, devhi;
unsigned char chi, clo, max;
2005-04-22 22:07:01 +00:00
int ndigits;
id->match_flags = TO_NATIVE(id->match_flags);
id->idVendor = TO_NATIVE(id->idVendor);
id->idProduct = TO_NATIVE(id->idProduct);
devlo = id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO ?
TO_NATIVE(id->bcdDevice_lo) : 0x0U;
devhi = id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI ?
TO_NATIVE(id->bcdDevice_hi) : ~0x0U;
/* Figure out if this entry is in bcd or hex format */
max = 0x9; /* Default to decimal format */
for (ndigits = 0 ; ndigits < sizeof(id->bcdDevice_lo) * 2 ; ndigits++) {
clo = (devlo >> (ndigits << 2)) & 0xf;
chi = ((devhi > 0x9999 ? 0x9999 : devhi) >> (ndigits << 2)) & 0xf;
if (clo > max || chi > max) {
max = 0xf;
break;
}
}
2005-04-22 22:07:01 +00:00
/*
* Some modules (visor) have empty slots as placeholder for
* run-time specification that results in catch-all alias
*/
if (!(id->idVendor | id->idProduct | id->bDeviceClass | id->bInterfaceClass))
2005-04-22 22:07:01 +00:00
return;
/* Convert numeric bcdDevice range into fnmatch-able pattern(s) */
for (ndigits = sizeof(id->bcdDevice_lo) * 2 - 1; devlo <= devhi; ndigits--) {
clo = devlo & 0xf;
chi = devhi & 0xf;
if (chi > max) /* If we are in bcd mode, truncate if necessary */
chi = max;
2005-04-22 22:07:01 +00:00
devlo >>= 4;
devhi >>= 4;
if (devlo == devhi || !ndigits) {
do_usb_entry(id, devlo, ndigits, clo, chi, max, mod);
2005-04-22 22:07:01 +00:00
break;
}
if (clo > 0x0)
do_usb_entry(id,
incbcd(&devlo, 1, max,
sizeof(id->bcdDevice_lo) * 2),
ndigits, clo, max, max, mod);
2005-04-22 22:07:01 +00:00
if (chi < max)
do_usb_entry(id,
incbcd(&devhi, -1, max,
sizeof(id->bcdDevice_lo) * 2),
ndigits, 0x0, chi, max, mod);
2005-04-22 22:07:01 +00:00
}
}
static void do_usb_table(void *symval, unsigned long size,
struct module *mod)
{
unsigned int i;
const unsigned long id_size = sizeof(struct usb_device_id);
device_id_check(mod->name, "usb", size, id_size, symval);
2005-04-22 22:07:01 +00:00
/* Leave last one: it's the terminator. */
size -= id_size;
for (i = 0; i < size; i += id_size)
do_usb_entry_multi(symval + i, mod);
}
/* Looks like: hid:bNvNpN */
static int do_hid_entry(const char *filename,
struct hid_device_id *id, char *alias)
{
id->bus = TO_NATIVE(id->bus);
id->group = TO_NATIVE(id->group);
id->vendor = TO_NATIVE(id->vendor);
id->product = TO_NATIVE(id->product);
sprintf(alias, "hid:");
ADD(alias, "b", id->bus != HID_BUS_ANY, id->bus);
ADD(alias, "g", id->group != HID_GROUP_ANY, id->group);
ADD(alias, "v", id->vendor != HID_ANY_ID, id->vendor);
ADD(alias, "p", id->product != HID_ANY_ID, id->product);
return 1;
}
ADD_TO_DEVTABLE("hid", struct hid_device_id, do_hid_entry);
/* Looks like: ieee1394:venNmoNspNverN */
static int do_ieee1394_entry(const char *filename,
struct ieee1394_device_id *id, char *alias)
{
id->match_flags = TO_NATIVE(id->match_flags);
id->vendor_id = TO_NATIVE(id->vendor_id);
id->model_id = TO_NATIVE(id->model_id);
id->specifier_id = TO_NATIVE(id->specifier_id);
id->version = TO_NATIVE(id->version);
strcpy(alias, "ieee1394:");
ADD(alias, "ven", id->match_flags & IEEE1394_MATCH_VENDOR_ID,
id->vendor_id);
ADD(alias, "mo", id->match_flags & IEEE1394_MATCH_MODEL_ID,
id->model_id);
ADD(alias, "sp", id->match_flags & IEEE1394_MATCH_SPECIFIER_ID,
id->specifier_id);
ADD(alias, "ver", id->match_flags & IEEE1394_MATCH_VERSION,
id->version);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("ieee1394", struct ieee1394_device_id, do_ieee1394_entry);
/* Looks like: pci:vNdNsvNsdNbcNscNiN. */
static int do_pci_entry(const char *filename,
struct pci_device_id *id, char *alias)
{
/* Class field can be divided into these three. */
unsigned char baseclass, subclass, interface,
baseclass_mask, subclass_mask, interface_mask;
id->vendor = TO_NATIVE(id->vendor);
id->device = TO_NATIVE(id->device);
id->subvendor = TO_NATIVE(id->subvendor);
id->subdevice = TO_NATIVE(id->subdevice);
id->class = TO_NATIVE(id->class);
id->class_mask = TO_NATIVE(id->class_mask);
strcpy(alias, "pci:");
ADD(alias, "v", id->vendor != PCI_ANY_ID, id->vendor);
ADD(alias, "d", id->device != PCI_ANY_ID, id->device);
ADD(alias, "sv", id->subvendor != PCI_ANY_ID, id->subvendor);
ADD(alias, "sd", id->subdevice != PCI_ANY_ID, id->subdevice);
baseclass = (id->class) >> 16;
baseclass_mask = (id->class_mask) >> 16;
subclass = (id->class) >> 8;
subclass_mask = (id->class_mask) >> 8;
interface = id->class;
interface_mask = id->class_mask;
if ((baseclass_mask != 0 && baseclass_mask != 0xFF)
|| (subclass_mask != 0 && subclass_mask != 0xFF)
|| (interface_mask != 0 && interface_mask != 0xFF)) {
warn("Can't handle masks in %s:%04X\n",
filename, id->class_mask);
return 0;
}
ADD(alias, "bc", baseclass_mask == 0xFF, baseclass);
ADD(alias, "sc", subclass_mask == 0xFF, subclass);
ADD(alias, "i", interface_mask == 0xFF, interface);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("pci", struct pci_device_id, do_pci_entry);
/* looks like: "ccw:tNmNdtNdmN" */
static int do_ccw_entry(const char *filename,
struct ccw_device_id *id, char *alias)
{
id->match_flags = TO_NATIVE(id->match_flags);
id->cu_type = TO_NATIVE(id->cu_type);
id->cu_model = TO_NATIVE(id->cu_model);
id->dev_type = TO_NATIVE(id->dev_type);
id->dev_model = TO_NATIVE(id->dev_model);
strcpy(alias, "ccw:");
ADD(alias, "t", id->match_flags&CCW_DEVICE_ID_MATCH_CU_TYPE,
id->cu_type);
ADD(alias, "m", id->match_flags&CCW_DEVICE_ID_MATCH_CU_MODEL,
id->cu_model);
ADD(alias, "dt", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_TYPE,
id->dev_type);
ADD(alias, "dm", id->match_flags&CCW_DEVICE_ID_MATCH_DEVICE_MODEL,
id->dev_model);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("ccw", struct ccw_device_id, do_ccw_entry);
/* looks like: "ap:tN" */
static int do_ap_entry(const char *filename,
struct ap_device_id *id, char *alias)
{
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
sprintf(alias, "ap:t%02X*", id->dev_type);
return 1;
}
ADD_TO_DEVTABLE("ap", struct ap_device_id, do_ap_entry);
/* looks like: "css:tN" */
static int do_css_entry(const char *filename,
struct css_device_id *id, char *alias)
{
sprintf(alias, "css:t%01X", id->type);
return 1;
}
ADD_TO_DEVTABLE("css", struct css_device_id, do_css_entry);
/* Looks like: "serio:tyNprNidNexN" */
static int do_serio_entry(const char *filename,
struct serio_device_id *id, char *alias)
{
id->type = TO_NATIVE(id->type);
id->proto = TO_NATIVE(id->proto);
id->id = TO_NATIVE(id->id);
id->extra = TO_NATIVE(id->extra);
strcpy(alias, "serio:");
ADD(alias, "ty", id->type != SERIO_ANY, id->type);
ADD(alias, "pr", id->proto != SERIO_ANY, id->proto);
ADD(alias, "id", id->id != SERIO_ANY, id->id);
ADD(alias, "ex", id->extra != SERIO_ANY, id->extra);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("serio", struct serio_device_id, do_serio_entry);
/* looks like: "acpi:ACPI0003 or acpi:PNP0C0B" or "acpi:LNXVIDEO" */
static int do_acpi_entry(const char *filename,
struct acpi_device_id *id, char *alias)
{
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
sprintf(alias, "acpi*:%s:*", id->id);
return 1;
}
ADD_TO_DEVTABLE("acpi", struct acpi_device_id, do_acpi_entry);
/* looks like: "pnp:dD" */
static void do_pnp_device_entry(void *symval, unsigned long size,
struct module *mod)
{
const unsigned long id_size = sizeof(struct pnp_device_id);
const unsigned int count = (size / id_size)-1;
const struct pnp_device_id *devs = symval;
unsigned int i;
device_id_check(mod->name, "pnp", size, id_size, symval);
for (i = 0; i < count; i++) {
const char *id = (char *)devs[i].id;
char acpi_id[sizeof(devs[0].id)];
int j;
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"pnp:d%s*\");\n", id);
/* fix broken pnp bus lowercasing */
for (j = 0; j < sizeof(acpi_id); j++)
acpi_id[j] = toupper(id[j]);
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
}
}
PNP: add all PNP card device id's as individual aliases The current PNP combined card + devices module aliase can never ever match anything, because these values are not available all at the same time to request a module. Instead of adding the combined alias, we add the device id's all as individual aliases. Device id's are exported by the PNP bus and can now properly used to request the loading of a matching module. The module snd-sbawe currently exports aliases, which can never match anything: alias: pnp:cCTLXXXXdCTL0045dCTL0022* alias: pnp:cCTLXXXXdCTL0044dCTL0023* alias: pnp:cCTLXXXXdCTL0042dCTL0022* alias: pnp:cCTLXXXXdCTL0041dCTL0021* alias: pnp:cCTLXXXXdCTL0031dCTL0021* alias: pnp:cCTL00eddCTL0041dCTL0070* alias: pnp:cCTL00e9dCTL0045dCTL0022* alias: pnp:cCTL00e4dCTL0045dCTL0022* alias: pnp:cCTL00c7dCTL0045dCTL0022* alias: pnp:cCTL00c5dCTL0045dCTL0022* alias: pnp:cCTL00c3dCTL0045dCTL0022* alias: pnp:cCTL00c1dCTL0042dCTL0022* alias: pnp:cCTL00b2dCTL0044dCTL0023* alias: pnp:cCTL009edCTL0044dCTL0023* alias: pnp:cCTL009ddCTL0042dCTL0022* alias: pnp:cCTL009fdCTL0041dCTL0021* alias: pnp:cCTL009cdCTL0041dCTL0021* alias: pnp:cCTL009adCTL0041dCTL0021* alias: pnp:cCTL0054dCTL0031dCTL0021* alias: pnp:cCTL0048dCTL0031dCTL0021* alias: pnp:cCTL0047dCTL0031dCTL0021* alias: pnp:cCTL0046dCTL0031dCTL0021* alias: pnp:cCTL0045dCTL0031dCTL0021* alias: pnp:cCTL0044dCTL0031dCTL0021* alias: pnp:cCTL0043dCTL0031dCTL0021* alias: pnp:cCTL0042dCTL0031dCTL0021* alias: pnp:cCTL0039dCTL0031dCTL0021* alias: pnp:cCTL0035dCTL0031dCTL0021* With this patch it exports only the device id's, as properly matchable aliases: alias: pnp:dCTL0070* alias: pnp:dCTL0045* alias: pnp:dCTL0023* alias: pnp:dCTL0044* alias: pnp:dCTL0022* alias: pnp:dCTL0042* alias: pnp:dCTL0041* alias: pnp:dCTL0021* alias: pnp:dCTL0031* Now, the exported value of the PNP bus can be used to autoload a matching module: $ modprobe --first-time -n -v pnp:dCTL0045 insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko $ grep CTL0045 /sys/bus/pnp/devices/*/id /sys/bus/pnp/devices/01:01.00/id:CTL0045 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-20 23:35:54 +00:00
/* looks like: "pnp:dD" for every device of the card */
static void do_pnp_card_entries(void *symval, unsigned long size,
struct module *mod)
{
PNP: add all PNP card device id's as individual aliases The current PNP combined card + devices module aliase can never ever match anything, because these values are not available all at the same time to request a module. Instead of adding the combined alias, we add the device id's all as individual aliases. Device id's are exported by the PNP bus and can now properly used to request the loading of a matching module. The module snd-sbawe currently exports aliases, which can never match anything: alias: pnp:cCTLXXXXdCTL0045dCTL0022* alias: pnp:cCTLXXXXdCTL0044dCTL0023* alias: pnp:cCTLXXXXdCTL0042dCTL0022* alias: pnp:cCTLXXXXdCTL0041dCTL0021* alias: pnp:cCTLXXXXdCTL0031dCTL0021* alias: pnp:cCTL00eddCTL0041dCTL0070* alias: pnp:cCTL00e9dCTL0045dCTL0022* alias: pnp:cCTL00e4dCTL0045dCTL0022* alias: pnp:cCTL00c7dCTL0045dCTL0022* alias: pnp:cCTL00c5dCTL0045dCTL0022* alias: pnp:cCTL00c3dCTL0045dCTL0022* alias: pnp:cCTL00c1dCTL0042dCTL0022* alias: pnp:cCTL00b2dCTL0044dCTL0023* alias: pnp:cCTL009edCTL0044dCTL0023* alias: pnp:cCTL009ddCTL0042dCTL0022* alias: pnp:cCTL009fdCTL0041dCTL0021* alias: pnp:cCTL009cdCTL0041dCTL0021* alias: pnp:cCTL009adCTL0041dCTL0021* alias: pnp:cCTL0054dCTL0031dCTL0021* alias: pnp:cCTL0048dCTL0031dCTL0021* alias: pnp:cCTL0047dCTL0031dCTL0021* alias: pnp:cCTL0046dCTL0031dCTL0021* alias: pnp:cCTL0045dCTL0031dCTL0021* alias: pnp:cCTL0044dCTL0031dCTL0021* alias: pnp:cCTL0043dCTL0031dCTL0021* alias: pnp:cCTL0042dCTL0031dCTL0021* alias: pnp:cCTL0039dCTL0031dCTL0021* alias: pnp:cCTL0035dCTL0031dCTL0021* With this patch it exports only the device id's, as properly matchable aliases: alias: pnp:dCTL0070* alias: pnp:dCTL0045* alias: pnp:dCTL0023* alias: pnp:dCTL0044* alias: pnp:dCTL0022* alias: pnp:dCTL0042* alias: pnp:dCTL0041* alias: pnp:dCTL0021* alias: pnp:dCTL0031* Now, the exported value of the PNP bus can be used to autoload a matching module: $ modprobe --first-time -n -v pnp:dCTL0045 insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko $ grep CTL0045 /sys/bus/pnp/devices/*/id /sys/bus/pnp/devices/01:01.00/id:CTL0045 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-20 23:35:54 +00:00
const unsigned long id_size = sizeof(struct pnp_card_device_id);
const unsigned int count = (size / id_size)-1;
const struct pnp_card_device_id *cards = symval;
unsigned int i;
PNP: add all PNP card device id's as individual aliases The current PNP combined card + devices module aliase can never ever match anything, because these values are not available all at the same time to request a module. Instead of adding the combined alias, we add the device id's all as individual aliases. Device id's are exported by the PNP bus and can now properly used to request the loading of a matching module. The module snd-sbawe currently exports aliases, which can never match anything: alias: pnp:cCTLXXXXdCTL0045dCTL0022* alias: pnp:cCTLXXXXdCTL0044dCTL0023* alias: pnp:cCTLXXXXdCTL0042dCTL0022* alias: pnp:cCTLXXXXdCTL0041dCTL0021* alias: pnp:cCTLXXXXdCTL0031dCTL0021* alias: pnp:cCTL00eddCTL0041dCTL0070* alias: pnp:cCTL00e9dCTL0045dCTL0022* alias: pnp:cCTL00e4dCTL0045dCTL0022* alias: pnp:cCTL00c7dCTL0045dCTL0022* alias: pnp:cCTL00c5dCTL0045dCTL0022* alias: pnp:cCTL00c3dCTL0045dCTL0022* alias: pnp:cCTL00c1dCTL0042dCTL0022* alias: pnp:cCTL00b2dCTL0044dCTL0023* alias: pnp:cCTL009edCTL0044dCTL0023* alias: pnp:cCTL009ddCTL0042dCTL0022* alias: pnp:cCTL009fdCTL0041dCTL0021* alias: pnp:cCTL009cdCTL0041dCTL0021* alias: pnp:cCTL009adCTL0041dCTL0021* alias: pnp:cCTL0054dCTL0031dCTL0021* alias: pnp:cCTL0048dCTL0031dCTL0021* alias: pnp:cCTL0047dCTL0031dCTL0021* alias: pnp:cCTL0046dCTL0031dCTL0021* alias: pnp:cCTL0045dCTL0031dCTL0021* alias: pnp:cCTL0044dCTL0031dCTL0021* alias: pnp:cCTL0043dCTL0031dCTL0021* alias: pnp:cCTL0042dCTL0031dCTL0021* alias: pnp:cCTL0039dCTL0031dCTL0021* alias: pnp:cCTL0035dCTL0031dCTL0021* With this patch it exports only the device id's, as properly matchable aliases: alias: pnp:dCTL0070* alias: pnp:dCTL0045* alias: pnp:dCTL0023* alias: pnp:dCTL0044* alias: pnp:dCTL0022* alias: pnp:dCTL0042* alias: pnp:dCTL0041* alias: pnp:dCTL0021* alias: pnp:dCTL0031* Now, the exported value of the PNP bus can be used to autoload a matching module: $ modprobe --first-time -n -v pnp:dCTL0045 insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko $ grep CTL0045 /sys/bus/pnp/devices/*/id /sys/bus/pnp/devices/01:01.00/id:CTL0045 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-20 23:35:54 +00:00
device_id_check(mod->name, "pnp", size, id_size, symval);
for (i = 0; i < count; i++) {
unsigned int j;
const struct pnp_card_device_id *card = &cards[i];
for (j = 0; j < PNP_MAX_DEVICES; j++) {
const char *id = (char *)card->devs[j].id;
int i2, j2;
int dup = 0;
if (!id[0])
break;
/* find duplicate, already added value */
for (i2 = 0; i2 < i && !dup; i2++) {
const struct pnp_card_device_id *card2 = &cards[i2];
for (j2 = 0; j2 < PNP_MAX_DEVICES; j2++) {
const char *id2 = (char *)card2->devs[j2].id;
if (!id2[0])
break;
if (!strcmp(id, id2)) {
dup = 1;
break;
}
}
}
/* add an individual alias for every device entry */
if (!dup) {
char acpi_id[sizeof(card->devs[0].id)];
int k;
PNP: add all PNP card device id's as individual aliases The current PNP combined card + devices module aliase can never ever match anything, because these values are not available all at the same time to request a module. Instead of adding the combined alias, we add the device id's all as individual aliases. Device id's are exported by the PNP bus and can now properly used to request the loading of a matching module. The module snd-sbawe currently exports aliases, which can never match anything: alias: pnp:cCTLXXXXdCTL0045dCTL0022* alias: pnp:cCTLXXXXdCTL0044dCTL0023* alias: pnp:cCTLXXXXdCTL0042dCTL0022* alias: pnp:cCTLXXXXdCTL0041dCTL0021* alias: pnp:cCTLXXXXdCTL0031dCTL0021* alias: pnp:cCTL00eddCTL0041dCTL0070* alias: pnp:cCTL00e9dCTL0045dCTL0022* alias: pnp:cCTL00e4dCTL0045dCTL0022* alias: pnp:cCTL00c7dCTL0045dCTL0022* alias: pnp:cCTL00c5dCTL0045dCTL0022* alias: pnp:cCTL00c3dCTL0045dCTL0022* alias: pnp:cCTL00c1dCTL0042dCTL0022* alias: pnp:cCTL00b2dCTL0044dCTL0023* alias: pnp:cCTL009edCTL0044dCTL0023* alias: pnp:cCTL009ddCTL0042dCTL0022* alias: pnp:cCTL009fdCTL0041dCTL0021* alias: pnp:cCTL009cdCTL0041dCTL0021* alias: pnp:cCTL009adCTL0041dCTL0021* alias: pnp:cCTL0054dCTL0031dCTL0021* alias: pnp:cCTL0048dCTL0031dCTL0021* alias: pnp:cCTL0047dCTL0031dCTL0021* alias: pnp:cCTL0046dCTL0031dCTL0021* alias: pnp:cCTL0045dCTL0031dCTL0021* alias: pnp:cCTL0044dCTL0031dCTL0021* alias: pnp:cCTL0043dCTL0031dCTL0021* alias: pnp:cCTL0042dCTL0031dCTL0021* alias: pnp:cCTL0039dCTL0031dCTL0021* alias: pnp:cCTL0035dCTL0031dCTL0021* With this patch it exports only the device id's, as properly matchable aliases: alias: pnp:dCTL0070* alias: pnp:dCTL0045* alias: pnp:dCTL0023* alias: pnp:dCTL0044* alias: pnp:dCTL0022* alias: pnp:dCTL0042* alias: pnp:dCTL0041* alias: pnp:dCTL0021* alias: pnp:dCTL0031* Now, the exported value of the PNP bus can be used to autoload a matching module: $ modprobe --first-time -n -v pnp:dCTL0045 insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko $ grep CTL0045 /sys/bus/pnp/devices/*/id /sys/bus/pnp/devices/01:01.00/id:CTL0045 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-20 23:35:54 +00:00
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"pnp:d%s*\");\n", id);
/* fix broken pnp bus lowercasing */
for (k = 0; k < sizeof(acpi_id); k++)
acpi_id[k] = toupper(id[k]);
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id);
}
PNP: add all PNP card device id's as individual aliases The current PNP combined card + devices module aliase can never ever match anything, because these values are not available all at the same time to request a module. Instead of adding the combined alias, we add the device id's all as individual aliases. Device id's are exported by the PNP bus and can now properly used to request the loading of a matching module. The module snd-sbawe currently exports aliases, which can never match anything: alias: pnp:cCTLXXXXdCTL0045dCTL0022* alias: pnp:cCTLXXXXdCTL0044dCTL0023* alias: pnp:cCTLXXXXdCTL0042dCTL0022* alias: pnp:cCTLXXXXdCTL0041dCTL0021* alias: pnp:cCTLXXXXdCTL0031dCTL0021* alias: pnp:cCTL00eddCTL0041dCTL0070* alias: pnp:cCTL00e9dCTL0045dCTL0022* alias: pnp:cCTL00e4dCTL0045dCTL0022* alias: pnp:cCTL00c7dCTL0045dCTL0022* alias: pnp:cCTL00c5dCTL0045dCTL0022* alias: pnp:cCTL00c3dCTL0045dCTL0022* alias: pnp:cCTL00c1dCTL0042dCTL0022* alias: pnp:cCTL00b2dCTL0044dCTL0023* alias: pnp:cCTL009edCTL0044dCTL0023* alias: pnp:cCTL009ddCTL0042dCTL0022* alias: pnp:cCTL009fdCTL0041dCTL0021* alias: pnp:cCTL009cdCTL0041dCTL0021* alias: pnp:cCTL009adCTL0041dCTL0021* alias: pnp:cCTL0054dCTL0031dCTL0021* alias: pnp:cCTL0048dCTL0031dCTL0021* alias: pnp:cCTL0047dCTL0031dCTL0021* alias: pnp:cCTL0046dCTL0031dCTL0021* alias: pnp:cCTL0045dCTL0031dCTL0021* alias: pnp:cCTL0044dCTL0031dCTL0021* alias: pnp:cCTL0043dCTL0031dCTL0021* alias: pnp:cCTL0042dCTL0031dCTL0021* alias: pnp:cCTL0039dCTL0031dCTL0021* alias: pnp:cCTL0035dCTL0031dCTL0021* With this patch it exports only the device id's, as properly matchable aliases: alias: pnp:dCTL0070* alias: pnp:dCTL0045* alias: pnp:dCTL0023* alias: pnp:dCTL0044* alias: pnp:dCTL0022* alias: pnp:dCTL0042* alias: pnp:dCTL0041* alias: pnp:dCTL0021* alias: pnp:dCTL0031* Now, the exported value of the PNP bus can be used to autoload a matching module: $ modprobe --first-time -n -v pnp:dCTL0045 insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko $ grep CTL0045 /sys/bus/pnp/devices/*/id /sys/bus/pnp/devices/01:01.00/id:CTL0045 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-20 23:35:54 +00:00
}
}
}
/* Looks like: pcmcia:mNcNfNfnNpfnNvaNvbNvcNvdN. */
static int do_pcmcia_entry(const char *filename,
struct pcmcia_device_id *id, char *alias)
{
unsigned int i;
id->match_flags = TO_NATIVE(id->match_flags);
id->manf_id = TO_NATIVE(id->manf_id);
id->card_id = TO_NATIVE(id->card_id);
id->func_id = TO_NATIVE(id->func_id);
id->function = TO_NATIVE(id->function);
id->device_no = TO_NATIVE(id->device_no);
for (i=0; i<4; i++) {
id->prod_id_hash[i] = TO_NATIVE(id->prod_id_hash[i]);
}
strcpy(alias, "pcmcia:");
ADD(alias, "m", id->match_flags & PCMCIA_DEV_ID_MATCH_MANF_ID,
id->manf_id);
ADD(alias, "c", id->match_flags & PCMCIA_DEV_ID_MATCH_CARD_ID,
id->card_id);
ADD(alias, "f", id->match_flags & PCMCIA_DEV_ID_MATCH_FUNC_ID,
id->func_id);
ADD(alias, "fn", id->match_flags & PCMCIA_DEV_ID_MATCH_FUNCTION,
id->function);
ADD(alias, "pfn", id->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO,
id->device_no);
ADD(alias, "pa", id->match_flags & PCMCIA_DEV_ID_MATCH_PROD_ID1, id->prod_id_hash[0]);
ADD(alias, "pb", id->match_flags & PCMCIA_DEV_ID_MATCH_PROD_ID2, id->prod_id_hash[1]);
ADD(alias, "pc", id->match_flags & PCMCIA_DEV_ID_MATCH_PROD_ID3, id->prod_id_hash[2]);
ADD(alias, "pd", id->match_flags & PCMCIA_DEV_ID_MATCH_PROD_ID4, id->prod_id_hash[3]);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("pcmcia", struct pcmcia_device_id, do_pcmcia_entry);
static int do_of_entry (const char *filename, struct of_device_id *of, char *alias)
{
int len;
char *tmp;
len = sprintf (alias, "of:N%sT%s",
of->name[0] ? of->name : "*",
of->type[0] ? of->type : "*");
if (of->compatible[0])
sprintf (&alias[len], "%sC%s",
of->type[0] ? "*" : "",
of->compatible);
/* Replace all whitespace with underscores */
for (tmp = alias; tmp && *tmp; tmp++)
if (isspace (*tmp))
*tmp = '_';
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("of", struct of_device_id, do_of_entry);
static int do_vio_entry(const char *filename, struct vio_device_id *vio,
char *alias)
{
char *tmp;
sprintf(alias, "vio:T%sS%s", vio->type[0] ? vio->type : "*",
vio->compat[0] ? vio->compat : "*");
/* Replace all whitespace with underscores */
for (tmp = alias; tmp && *tmp; tmp++)
if (isspace (*tmp))
*tmp = '_';
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("vio", struct vio_device_id, do_vio_entry);
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
static void do_input(char *alias,
kernel_ulong_t *arr, unsigned int min, unsigned int max)
{
unsigned int i;
for (i = min; i < max; i++)
[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patch There is a small but annoying bug in scripts/mod/file2alias.c which causes it to generate invalid aliases for input devices on 64 bit archs. This causes joydev.ko to not be automaticly loaded when inserting a joystick, resulting in a non working joystick (for the average user). In scripts/mod/file2alias.c is the following code for generating the input aliases: static void do_input(char *alias, kernel_ulong_t *arr, unsigned int min, unsigned int max) { unsigned int i; for (i = min; i < max; i++) if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) sprintf(alias + strlen(alias), "%X,*", i); } On 32 bits systems, this correctly generates "0,*" for the first alias, "8,*" for the second etc. However on 64 bits it generates: "0,*20,*" resp "8,*28,*" Notice how it adds 20 + first entry (hex) ! to the list of hex codes, which is 32 more then the first entry, thus is because the bit test above wraps at 32 bits instead of 64. scripts/mod/file2alias.c, line 379 reads: if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) That should be: if (arr[i / BITS_PER_LONG] & (1L << (i%BITS_PER_LONG))) Notice the added 'L' after the 1, otherwise that is an 32 bit int instead of a 64 bit long, and when that int gets shifted >= 32 times, appearantly the number by which to shift is wrapped at 5 bits ( % 32) causing it to test a bit 32 bits too low. The patch below makes the nescesarry 1 char change :) Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-15 10:09:27 +00:00
if (arr[i / BITS_PER_LONG] & (1L << (i%BITS_PER_LONG)))
sprintf(alias + strlen(alias), "%X,*", i);
}
/* input:b0v0p0e0-eXkXrXaXmXlXsXfXwX where X is comma-separated %02X. */
static int do_input_entry(const char *filename, struct input_device_id *id,
char *alias)
{
sprintf(alias, "input:");
ADD(alias, "b", id->flags & INPUT_DEVICE_ID_MATCH_BUS, id->bustype);
ADD(alias, "v", id->flags & INPUT_DEVICE_ID_MATCH_VENDOR, id->vendor);
ADD(alias, "p", id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT, id->product);
ADD(alias, "e", id->flags & INPUT_DEVICE_ID_MATCH_VERSION, id->version);
sprintf(alias + strlen(alias), "-e*");
if (id->flags & INPUT_DEVICE_ID_MATCH_EVBIT)
do_input(alias, id->evbit, 0, INPUT_DEVICE_ID_EV_MAX);
sprintf(alias + strlen(alias), "k*");
if (id->flags & INPUT_DEVICE_ID_MATCH_KEYBIT)
do_input(alias, id->keybit,
INPUT_DEVICE_ID_KEY_MIN_INTERESTING,
INPUT_DEVICE_ID_KEY_MAX);
sprintf(alias + strlen(alias), "r*");
if (id->flags & INPUT_DEVICE_ID_MATCH_RELBIT)
do_input(alias, id->relbit, 0, INPUT_DEVICE_ID_REL_MAX);
sprintf(alias + strlen(alias), "a*");
if (id->flags & INPUT_DEVICE_ID_MATCH_ABSBIT)
do_input(alias, id->absbit, 0, INPUT_DEVICE_ID_ABS_MAX);
sprintf(alias + strlen(alias), "m*");
if (id->flags & INPUT_DEVICE_ID_MATCH_MSCIT)
do_input(alias, id->mscbit, 0, INPUT_DEVICE_ID_MSC_MAX);
sprintf(alias + strlen(alias), "l*");
if (id->flags & INPUT_DEVICE_ID_MATCH_LEDBIT)
do_input(alias, id->ledbit, 0, INPUT_DEVICE_ID_LED_MAX);
sprintf(alias + strlen(alias), "s*");
if (id->flags & INPUT_DEVICE_ID_MATCH_SNDBIT)
do_input(alias, id->sndbit, 0, INPUT_DEVICE_ID_SND_MAX);
sprintf(alias + strlen(alias), "f*");
if (id->flags & INPUT_DEVICE_ID_MATCH_FFBIT)
do_input(alias, id->ffbit, 0, INPUT_DEVICE_ID_FF_MAX);
sprintf(alias + strlen(alias), "w*");
if (id->flags & INPUT_DEVICE_ID_MATCH_SWBIT)
do_input(alias, id->swbit, 0, INPUT_DEVICE_ID_SW_MAX);
return 1;
}
ADD_TO_DEVTABLE("input", struct input_device_id, do_input_entry);
[PATCH] EISA bus MODALIAS attributes support Add modalias attribute support for the almost forgotten now EISA bus and (at least some) EISA-aware modules. The modalias entry looks like (for an 3c509 NIC): eisa:sTCM5093 and the in-module alias like: eisa:sTCM5093* The patch moves struct eisa_device_id declaration from include/linux/eisa.h to include/linux/mod_devicetable.h (so that the former now #includes the latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE declared), and adds recognision of __mod_eisa_device_table to scripts/mod/file2alias.c so that proper modules.alias will be generated. There's no support for /lib/modules/$kver/modules.eisamap, as it's not used by any existing tools, and because with in-kernel modalias mechanism those maps are obsolete anyway. The rationale for this patch is: a) to make EISA bus to act as other busses with modalias support, to unify driver loading b) to foget about EISA finally - with this patch, kernel (who still supports EISA) will be the only one who knows how to choose the necessary drivers for this bus ;) [akpm@osdl.org: fix the kbuild bit] Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org> Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:50:56 +00:00
static int do_eisa_entry(const char *filename, struct eisa_device_id *eisa,
char *alias)
{
if (eisa->sig[0])
sprintf(alias, EISA_DEVICE_MODALIAS_FMT "*", eisa->sig);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
else
strcat(alias, "*");
[PATCH] EISA bus MODALIAS attributes support Add modalias attribute support for the almost forgotten now EISA bus and (at least some) EISA-aware modules. The modalias entry looks like (for an 3c509 NIC): eisa:sTCM5093 and the in-module alias like: eisa:sTCM5093* The patch moves struct eisa_device_id declaration from include/linux/eisa.h to include/linux/mod_devicetable.h (so that the former now #includes the latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE declared), and adds recognision of __mod_eisa_device_table to scripts/mod/file2alias.c so that proper modules.alias will be generated. There's no support for /lib/modules/$kver/modules.eisamap, as it's not used by any existing tools, and because with in-kernel modalias mechanism those maps are obsolete anyway. The rationale for this patch is: a) to make EISA bus to act as other busses with modalias support, to unify driver loading b) to foget about EISA finally - with this patch, kernel (who still supports EISA) will be the only one who knows how to choose the necessary drivers for this bus ;) [akpm@osdl.org: fix the kbuild bit] Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org> Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:50:56 +00:00
return 1;
}
ADD_TO_DEVTABLE("eisa", struct eisa_device_id, do_eisa_entry);
[PATCH] EISA bus MODALIAS attributes support Add modalias attribute support for the almost forgotten now EISA bus and (at least some) EISA-aware modules. The modalias entry looks like (for an 3c509 NIC): eisa:sTCM5093 and the in-module alias like: eisa:sTCM5093* The patch moves struct eisa_device_id declaration from include/linux/eisa.h to include/linux/mod_devicetable.h (so that the former now #includes the latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE declared), and adds recognision of __mod_eisa_device_table to scripts/mod/file2alias.c so that proper modules.alias will be generated. There's no support for /lib/modules/$kver/modules.eisamap, as it's not used by any existing tools, and because with in-kernel modalias mechanism those maps are obsolete anyway. The rationale for this patch is: a) to make EISA bus to act as other busses with modalias support, to unify driver loading b) to foget about EISA finally - with this patch, kernel (who still supports EISA) will be the only one who knows how to choose the necessary drivers for this bus ;) [akpm@osdl.org: fix the kbuild bit] Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org> Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:50:56 +00:00
/* Looks like: parisc:tNhvNrevNsvN */
static int do_parisc_entry(const char *filename, struct parisc_device_id *id,
char *alias)
{
id->hw_type = TO_NATIVE(id->hw_type);
id->hversion = TO_NATIVE(id->hversion);
id->hversion_rev = TO_NATIVE(id->hversion_rev);
id->sversion = TO_NATIVE(id->sversion);
strcpy(alias, "parisc:");
ADD(alias, "t", id->hw_type != PA_HWTYPE_ANY_ID, id->hw_type);
ADD(alias, "hv", id->hversion != PA_HVERSION_ANY_ID, id->hversion);
ADD(alias, "rev", id->hversion_rev != PA_HVERSION_REV_ANY_ID, id->hversion_rev);
ADD(alias, "sv", id->sversion != PA_SVERSION_ANY_ID, id->sversion);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("parisc", struct parisc_device_id, do_parisc_entry);
/* Looks like: sdio:cNvNdN. */
static int do_sdio_entry(const char *filename,
struct sdio_device_id *id, char *alias)
{
id->class = TO_NATIVE(id->class);
id->vendor = TO_NATIVE(id->vendor);
id->device = TO_NATIVE(id->device);
strcpy(alias, "sdio:");
ADD(alias, "c", id->class != (__u8)SDIO_ANY_ID, id->class);
ADD(alias, "v", id->vendor != (__u16)SDIO_ANY_ID, id->vendor);
ADD(alias, "d", id->device != (__u16)SDIO_ANY_ID, id->device);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits) [SKY2]: status polling loop (post merge) [NET]: Fix NAPI completion handling in some drivers. [TCP]: Limit processing lost_retrans loop to work-to-do cases [TCP]: Fix lost_retrans loop vs fastpath problems [TCP]: No need to re-count fackets_out/sacked_out at RTO [TCP]: Extract tcp_match_queue_to_sack from sacktag code [TCP]: Kill almost unused variable pcount from sacktag [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L [TCP]: Add bytes_acked (ABC) clearing to FRTO too [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2 [NETFILTER]: x_tables: add missing ip6t_modulename aliases [NETFILTER]: nf_conntrack_tcp: fix connection reopening [QETH]: fix qeth_main.c [NETLINK]: fib_frontend build fixes [IPv6]: Export userland ND options through netlink (RDNSS support) [9P]: build fix with !CONFIG_SYSCTL [NET]: Fix dev_put() and dev_hold() comments [NET]: make netlink user -> kernel interface synchronious [NET]: unify netlink kernel socket recognition [NET]: cleanup 3rd argument in netlink_sendskb ... Fix up conflicts manually in Documentation/feature-removal-schedule.txt and my new least favourite crap, the "mod_devicetable" support in the files include/linux/mod_devicetable.h and scripts/mod/file2alias.c. (The latter files seem to be explicitly _designed_ to get conflicts when different subsystems work with them - that have an absolutely horrid lack of subsystem separation!) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12 02:40:14 +00:00
return 1;
}
ADD_TO_DEVTABLE("sdio", struct sdio_device_id, do_sdio_entry);
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits) [SKY2]: status polling loop (post merge) [NET]: Fix NAPI completion handling in some drivers. [TCP]: Limit processing lost_retrans loop to work-to-do cases [TCP]: Fix lost_retrans loop vs fastpath problems [TCP]: No need to re-count fackets_out/sacked_out at RTO [TCP]: Extract tcp_match_queue_to_sack from sacktag code [TCP]: Kill almost unused variable pcount from sacktag [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L [TCP]: Add bytes_acked (ABC) clearing to FRTO too [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2 [NETFILTER]: x_tables: add missing ip6t_modulename aliases [NETFILTER]: nf_conntrack_tcp: fix connection reopening [QETH]: fix qeth_main.c [NETLINK]: fib_frontend build fixes [IPv6]: Export userland ND options through netlink (RDNSS support) [9P]: build fix with !CONFIG_SYSCTL [NET]: Fix dev_put() and dev_hold() comments [NET]: make netlink user -> kernel interface synchronious [NET]: unify netlink kernel socket recognition [NET]: cleanup 3rd argument in netlink_sendskb ... Fix up conflicts manually in Documentation/feature-removal-schedule.txt and my new least favourite crap, the "mod_devicetable" support in the files include/linux/mod_devicetable.h and scripts/mod/file2alias.c. (The latter files seem to be explicitly _designed_ to get conflicts when different subsystems work with them - that have an absolutely horrid lack of subsystem separation!) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12 02:40:14 +00:00
/* Looks like: ssb:vNidNrevN. */
static int do_ssb_entry(const char *filename,
struct ssb_device_id *id, char *alias)
{
id->vendor = TO_NATIVE(id->vendor);
id->coreid = TO_NATIVE(id->coreid);
id->revision = TO_NATIVE(id->revision);
strcpy(alias, "ssb:");
ADD(alias, "v", id->vendor != SSB_ANY_VENDOR, id->vendor);
ADD(alias, "id", id->coreid != SSB_ANY_ID, id->coreid);
ADD(alias, "rev", id->revision != SSB_ANY_REV, id->revision);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("ssb", struct ssb_device_id, do_ssb_entry);
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-09 16:56:46 +00:00
/* Looks like: bcma:mNidNrevNclN. */
static int do_bcma_entry(const char *filename,
struct bcma_device_id *id, char *alias)
{
id->manuf = TO_NATIVE(id->manuf);
id->id = TO_NATIVE(id->id);
id->rev = TO_NATIVE(id->rev);
id->class = TO_NATIVE(id->class);
strcpy(alias, "bcma:");
ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf);
ADD(alias, "id", id->id != BCMA_ANY_ID, id->id);
ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev);
ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class);
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("bcma", struct bcma_device_id, do_bcma_entry);
bcma: add Broadcom specific AMBA bus driver Broadcom has released cards based on a new AMBA-based bus type. From a programming point of view, this new bus type differs from AMBA and does not use AMBA common registers. It also differs enough from SSB. We decided that a new bus driver is needed to keep the code clean. In its current form, the driver detects devices present on the bus and registers them in the system. It allows registering BCMA drivers for specified bus devices and provides them basic operations. The bus driver itself includes two important bus managing drivers: ChipCommon core driver and PCI(c) core driver. They are early used to allow correct initialization. Currently code is limited to supporting buses on PCI(e) devices, however the driver is designed to be used also on other hosts. The host abstraction layer is implemented and already used for PCI(e). Support for PCI(e) hosts is working and seems to be stable (access to 80211 core was tested successfully on a few devices). We can still optimize it by using some fixed windows, but this can be done later without affecting any external code. Windows are just ranges in MMIO used for accessing cores on the bus. Cc: Greg KH <greg@kroah.com> Cc: Michael Büsch <mb@bu3sch.de> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: George Kashperko <george@znau.edu.ua> Cc: Arend van Spriel <arend@broadcom.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <rmk@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Botting <andy@andybotting.com> Cc: linuxdriverproject <devel@linuxdriverproject.org> Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-09 16:56:46 +00:00
/* Looks like: virtio:dNvN */
static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
char *alias)
{
id->device = TO_NATIVE(id->device);
id->vendor = TO_NATIVE(id->vendor);
strcpy(alias, "virtio:");
ADD(alias, "d", id->device != VIRTIO_DEV_ANY_ID, id->device);
ADD(alias, "v", id->vendor != VIRTIO_DEV_ANY_ID, id->vendor);
modpost: i2c aliases need no trailing wildcard Not all device types need a wildcard at the end of their module aliases. In particular, for i2c module aliases, the trailing wildcard is not only unneeded, it could also cause the wrong driver to be loaded. As I2C devices have no IDs, i2c module aliases are simple, arbitrary device names. For example: $ /sbin/modinfo lm90 filename: /lib/modules/2.6.25-git18/kernel/drivers/hwmon/lm90.ko author: Jean Delvare <khali@linux-fr.org> description: LM90/ADM1032 driver license: GPL vermagic: 2.6.25-git18 mod_unload depends: hwmon alias: i2c:lm90* alias: i2c:adm1032* alias: i2c:lm99* alias: i2c:lm86* alias: i2c:max6657* alias: i2c:adt7461* alias: i2c:max6680* $ This would cause trouble if one I2C chip name matches the beginning of another I2C chip name and both chips are supported by different drivers. For example, an i2c device named lm9042 would cause the lm90 driver to be loaded, while it doesn't support that device. This case has yet to be seen in practice, but still, I'd like to fix it now. The cleanest fix is to remove the trailing wildcard from i2c module aliases. Here's a patch doing this. Not all device type aliases need a trailing wildcard, in particular the i2c aliases don't. Don't add a wildcard by default in do_table(), instead let each device type handler add it if needed. I have tested types acpi, dmi, eisa, i2c, ide, ieee1394, input, pci, pcmcia, platform, pnp, scsi, serio, ssb and usb. Other types (ccw, of, vio, parisc, sdio and virtio) are untested. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-05-02 18:37:21 +00:00
add_wildcard(alias);
return 1;
}
ADD_TO_DEVTABLE("virtio", struct virtio_device_id, do_virtio_entry);
/*
* Looks like: vmbus:guid
* Each byte of the guid will be represented by two hex characters
* in the name.
*/
static int do_vmbus_entry(const char *filename, struct hv_vmbus_device_id *id,
char *alias)
{
int i;
char guid_name[((sizeof(id->guid) + 1)) * 2];
for (i = 0; i < (sizeof(id->guid) * 2); i += 2)
sprintf(&guid_name[i], "%02x", id->guid[i/2]);
strcpy(alias, "vmbus:");
strcat(alias, guid_name);
return 1;
}
ADD_TO_DEVTABLE("vmbus", struct hv_vmbus_device_id, do_vmbus_entry);
/* Looks like: i2c:S */
static int do_i2c_entry(const char *filename, struct i2c_device_id *id,
char *alias)
{
sprintf(alias, I2C_MODULE_PREFIX "%s", id->name);
return 1;
}
ADD_TO_DEVTABLE("i2c", struct i2c_device_id, do_i2c_entry);
/* Looks like: spi:S */
static int do_spi_entry(const char *filename, struct spi_device_id *id,
char *alias)
{
sprintf(alias, SPI_MODULE_PREFIX "%s", id->name);
return 1;
}
ADD_TO_DEVTABLE("spi", struct spi_device_id, do_spi_entry);
static const struct dmifield {
const char *prefix;
int field;
} dmi_fields[] = {
{ "bvn", DMI_BIOS_VENDOR },
{ "bvr", DMI_BIOS_VERSION },
{ "bd", DMI_BIOS_DATE },
{ "svn", DMI_SYS_VENDOR },
{ "pn", DMI_PRODUCT_NAME },
{ "pvr", DMI_PRODUCT_VERSION },
{ "rvn", DMI_BOARD_VENDOR },
{ "rn", DMI_BOARD_NAME },
{ "rvr", DMI_BOARD_VERSION },
{ "cvn", DMI_CHASSIS_VENDOR },
{ "ct", DMI_CHASSIS_TYPE },
{ "cvr", DMI_CHASSIS_VERSION },
{ NULL, DMI_NONE }
};
static void dmi_ascii_filter(char *d, const char *s)
{
/* Filter out characters we don't want to see in the modalias string */
for (; *s; s++)
if (*s > ' ' && *s < 127 && *s != ':')
*(d++) = *s;
*d = 0;
}
static int do_dmi_entry(const char *filename, struct dmi_system_id *id,
char *alias)
{
int i, j;
sprintf(alias, "dmi*");
for (i = 0; i < ARRAY_SIZE(dmi_fields); i++) {
for (j = 0; j < 4; j++) {
if (id->matches[j].slot &&
id->matches[j].slot == dmi_fields[i].field) {
sprintf(alias + strlen(alias), ":%s*",
dmi_fields[i].prefix);
dmi_ascii_filter(alias + strlen(alias),
id->matches[j].substr);
strcat(alias, "*");
}
}
}
strcat(alias, ":");
return 1;
}
ADD_TO_DEVTABLE("dmi", struct dmi_system_id, do_dmi_entry);
static int do_platform_entry(const char *filename,
struct platform_device_id *id, char *alias)
{
sprintf(alias, PLATFORM_MODULE_PREFIX "%s", id->name);
return 1;
}
ADD_TO_DEVTABLE("platform", struct platform_device_id, do_platform_entry);
static int do_mdio_entry(const char *filename,
struct mdio_device_id *id, char *alias)
{
int i;
alias += sprintf(alias, MDIO_MODULE_PREFIX);
for (i = 0; i < 32; i++) {
if (!((id->phy_id_mask >> (31-i)) & 1))
*(alias++) = '?';
else if ((id->phy_id >> (31-i)) & 1)
*(alias++) = '1';
else
*(alias++) = '0';
}
/* Terminate the string */
*alias = 0;
return 1;
}
ADD_TO_DEVTABLE("mdio", struct mdio_device_id, do_mdio_entry);
/* Looks like: zorro:iN. */
static int do_zorro_entry(const char *filename, struct zorro_device_id *id,
char *alias)
{
id->id = TO_NATIVE(id->id);
strcpy(alias, "zorro:");
ADD(alias, "i", id->id != ZORRO_WILDCARD, id->id);
return 1;
}
ADD_TO_DEVTABLE("zorro", struct zorro_device_id, do_zorro_entry);
/* looks like: "pnp:dD" */
static int do_isapnp_entry(const char *filename,
struct isapnp_device_id *id, char *alias)
{
sprintf(alias, "pnp:d%c%c%c%x%x%x%x*",
'A' + ((id->vendor >> 2) & 0x3f) - 1,
'A' + (((id->vendor & 3) << 3) | ((id->vendor >> 13) & 7)) - 1,
'A' + ((id->vendor >> 8) & 0x1f) - 1,
(id->function >> 4) & 0x0f, id->function & 0x0f,
(id->function >> 12) & 0x0f, (id->function >> 8) & 0x0f);
return 1;
}
ADD_TO_DEVTABLE("isapnp", struct isapnp_device_id, do_isapnp_entry);
/*
* Append a match expression for a single masked hex digit.
* outp points to a pointer to the character at which to append.
* *outp is updated on return to point just after the appended text,
* to facilitate further appending.
*/
static void append_nibble_mask(char **outp,
unsigned int nibble, unsigned int mask)
{
char *p = *outp;
unsigned int i;
switch (mask) {
case 0:
*p++ = '?';
break;
case 0xf:
p += sprintf(p, "%X", nibble);
break;
default:
/*
* Dumbly emit a match pattern for all possible matching
* digits. This could be improved in some cases using ranges,
* but it has the advantage of being trivially correct, and is
* often optimal.
*/
*p++ = '[';
for (i = 0; i < 0x10; i++)
if ((i & mask) == nibble)
p += sprintf(p, "%X", i);
*p++ = ']';
}
/* Ensure that the string remains NUL-terminated: */
*p = '\0';
/* Advance the caller's end-of-string pointer: */
*outp = p;
}
/*
* looks like: "amba:dN"
*
* N is exactly 8 digits, where each is an upper-case hex digit, or
* a ? or [] pattern matching exactly one digit.
*/
static int do_amba_entry(const char *filename,
struct amba_id *id, char *alias)
{
unsigned int digit;
char *p = alias;
if ((id->id & id->mask) != id->id)
fatal("%s: Masked-off bit(s) of AMBA device ID are non-zero: "
"id=0x%08X, mask=0x%08X. Please fix this driver.\n",
filename, id->id, id->mask);
p += sprintf(alias, "amba:d");
for (digit = 0; digit < 8; digit++)
append_nibble_mask(&p,
(id->id >> (4 * (7 - digit))) & 0xf,
(id->mask >> (4 * (7 - digit))) & 0xf);
return 1;
}
ADD_TO_DEVTABLE("amba", struct amba_id, do_amba_entry);
Add driver auto probing for x86 features v4 There's a growing number of drivers that support a specific x86 feature or CPU. Currently loading these drivers currently on a generic distribution requires various driver specific hacks and it often doesn't work. This patch adds auto probing for drivers based on the x86 cpuid information, in particular based on vendor/family/model number and also based on CPUID feature bits. For example a common issue is not loading the SSE 4.2 accelerated CRC module: this can significantly lower the performance of BTRFS which relies on fast CRC. Another issue is loading the right CPUFREQ driver for the current CPU. Currently distributions often try all all possible driver until one sticks, which is not really a good way to do this. It works with existing udev without any changes. The code exports the x86 information as a generic string in sysfs that can be matched by udev's pattern matching. This scheme does not support numeric ranges, so if you want to handle e.g. ranges of model numbers they have to be encoded in ASCII or simply all models or families listed. Fixing that would require changing udev. Another issue is that udev will happily load all drivers that match, there is currently no nice way to stop a specific driver from being loaded if it's not needed (e.g. if you don't need fast CRC) But there are not that many cpu specific drivers around and they're all not that bloated, so this isn't a particularly serious issue. Originally this patch added the modalias to the normal cpu sysdevs. However sysdevs don't have all the infrastructure needed for udev, so it couldn't really autoload drivers. This patch instead adds the CPU modaliases to the cpuid devices, which are real devices with full support for udev. This implies that the cpuid driver has to be loaded to use this. This patch just adds infrastructure, some driver conversions in followups. Thanks to Kay for helping with some sysfs magic. v2: Constifcation, some updates v4: (trenn@suse.de): - Use kzalloc instead of kmalloc to terminate modalias buffer - Use uppercase hex values to match correctly against hex values containing letters Cc: Dave Jones <davej@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jen Axboe <axboe@kernel.dk> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25 23:09:05 +00:00
/* LOOKS like x86cpu:vendor:VVVV:family:FFFF:model:MMMM:feature:*,FEAT,*
* All fields are numbers. It would be nicer to use strings for vendor
* and feature, but getting those out of the build system here is too
* complicated.
*/
static int do_x86cpu_entry(const char *filename, struct x86_cpu_id *id,
char *alias)
{
id->feature = TO_NATIVE(id->feature);
id->family = TO_NATIVE(id->family);
id->model = TO_NATIVE(id->model);
id->vendor = TO_NATIVE(id->vendor);
strcpy(alias, "x86cpu:");
ADD(alias, "vendor:", id->vendor != X86_VENDOR_ANY, id->vendor);
ADD(alias, ":family:", id->family != X86_FAMILY_ANY, id->family);
ADD(alias, ":model:", id->model != X86_MODEL_ANY, id->model);
strcat(alias, ":feature:*");
if (id->feature != X86_FEATURE_ANY)
sprintf(alias + strlen(alias), "%04X*", id->feature);
Add driver auto probing for x86 features v4 There's a growing number of drivers that support a specific x86 feature or CPU. Currently loading these drivers currently on a generic distribution requires various driver specific hacks and it often doesn't work. This patch adds auto probing for drivers based on the x86 cpuid information, in particular based on vendor/family/model number and also based on CPUID feature bits. For example a common issue is not loading the SSE 4.2 accelerated CRC module: this can significantly lower the performance of BTRFS which relies on fast CRC. Another issue is loading the right CPUFREQ driver for the current CPU. Currently distributions often try all all possible driver until one sticks, which is not really a good way to do this. It works with existing udev without any changes. The code exports the x86 information as a generic string in sysfs that can be matched by udev's pattern matching. This scheme does not support numeric ranges, so if you want to handle e.g. ranges of model numbers they have to be encoded in ASCII or simply all models or families listed. Fixing that would require changing udev. Another issue is that udev will happily load all drivers that match, there is currently no nice way to stop a specific driver from being loaded if it's not needed (e.g. if you don't need fast CRC) But there are not that many cpu specific drivers around and they're all not that bloated, so this isn't a particularly serious issue. Originally this patch added the modalias to the normal cpu sysdevs. However sysdevs don't have all the infrastructure needed for udev, so it couldn't really autoload drivers. This patch instead adds the CPU modaliases to the cpuid devices, which are real devices with full support for udev. This implies that the cpuid driver has to be loaded to use this. This patch just adds infrastructure, some driver conversions in followups. Thanks to Kay for helping with some sysfs magic. v2: Constifcation, some updates v4: (trenn@suse.de): - Use kzalloc instead of kmalloc to terminate modalias buffer - Use uppercase hex values to match correctly against hex values containing letters Cc: Dave Jones <davej@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jen Axboe <axboe@kernel.dk> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Huang Ying <ying.huang@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-25 23:09:05 +00:00
return 1;
}
ADD_TO_DEVTABLE("x86cpu", struct x86_cpu_id, do_x86cpu_entry);
/* Does namelen bytes of name exactly match the symbol? */
static bool sym_is(const char *name, unsigned namelen, const char *symbol)
{
if (namelen != strlen(symbol))
return false;
return memcmp(name, symbol, namelen) == 0;
}
static void do_table(void *symval, unsigned long size,
unsigned long id_size,
const char *device_id,
void *function,
struct module *mod)
{
unsigned int i;
char alias[500];
int (*do_entry)(const char *, void *entry, char *alias) = function;
device_id_check(mod->name, device_id, size, id_size, symval);
/* Leave last one: it's the terminator. */
size -= id_size;
for (i = 0; i < size; i += id_size) {
if (do_entry(mod->name, symval+i, alias)) {
buf_printf(&mod->dev_table_buf,
"MODULE_ALIAS(\"%s\");\n", alias);
}
}
}
/* Create MODULE_ALIAS() statements.
* At this time, we cannot write the actual output C source yet,
* so we write into the mod->dev_table_buf buffer. */
void handle_moddevtable(struct module *mod, struct elf_info *info,
Elf_Sym *sym, const char *symname)
{
void *symval;
char *zeros = NULL;
const char *name;
unsigned int namelen;
/* We're looking for a section relative symbol */
if (!sym->st_shndx || get_secindex(info, sym) >= info->num_sections)
return;
/* We're looking for an object */
if (ELF_ST_TYPE(sym->st_info) != STT_OBJECT)
return;
/* All our symbols are of form <prefix>__mod_XXX_device_table. */
name = strstr(symname, "__mod_");
if (!name)
return;
name += strlen("__mod_");
namelen = strlen(name);
if (namelen < strlen("_device_table"))
return;
if (strcmp(name + namelen - strlen("_device_table"), "_device_table"))
return;
namelen -= strlen("_device_table");
/* Handle all-NULL symbols allocated into .bss */
if (info->sechdrs[get_secindex(info, sym)].sh_type & SHT_NOBITS) {
zeros = calloc(1, sym->st_size);
symval = zeros;
} else {
symval = (void *)info->hdr
+ info->sechdrs[get_secindex(info, sym)].sh_offset
+ sym->st_value;
}
/* First handle the "special" cases */
if (sym_is(name, namelen, "usb"))
2005-04-22 22:07:01 +00:00
do_usb_table(symval, sym->st_size, mod);
else if (sym_is(name, namelen, "pnp"))
do_pnp_device_entry(symval, sym->st_size, mod);
else if (sym_is(name, namelen, "pnp_card"))
PNP: add all PNP card device id's as individual aliases The current PNP combined card + devices module aliase can never ever match anything, because these values are not available all at the same time to request a module. Instead of adding the combined alias, we add the device id's all as individual aliases. Device id's are exported by the PNP bus and can now properly used to request the loading of a matching module. The module snd-sbawe currently exports aliases, which can never match anything: alias: pnp:cCTLXXXXdCTL0045dCTL0022* alias: pnp:cCTLXXXXdCTL0044dCTL0023* alias: pnp:cCTLXXXXdCTL0042dCTL0022* alias: pnp:cCTLXXXXdCTL0041dCTL0021* alias: pnp:cCTLXXXXdCTL0031dCTL0021* alias: pnp:cCTL00eddCTL0041dCTL0070* alias: pnp:cCTL00e9dCTL0045dCTL0022* alias: pnp:cCTL00e4dCTL0045dCTL0022* alias: pnp:cCTL00c7dCTL0045dCTL0022* alias: pnp:cCTL00c5dCTL0045dCTL0022* alias: pnp:cCTL00c3dCTL0045dCTL0022* alias: pnp:cCTL00c1dCTL0042dCTL0022* alias: pnp:cCTL00b2dCTL0044dCTL0023* alias: pnp:cCTL009edCTL0044dCTL0023* alias: pnp:cCTL009ddCTL0042dCTL0022* alias: pnp:cCTL009fdCTL0041dCTL0021* alias: pnp:cCTL009cdCTL0041dCTL0021* alias: pnp:cCTL009adCTL0041dCTL0021* alias: pnp:cCTL0054dCTL0031dCTL0021* alias: pnp:cCTL0048dCTL0031dCTL0021* alias: pnp:cCTL0047dCTL0031dCTL0021* alias: pnp:cCTL0046dCTL0031dCTL0021* alias: pnp:cCTL0045dCTL0031dCTL0021* alias: pnp:cCTL0044dCTL0031dCTL0021* alias: pnp:cCTL0043dCTL0031dCTL0021* alias: pnp:cCTL0042dCTL0031dCTL0021* alias: pnp:cCTL0039dCTL0031dCTL0021* alias: pnp:cCTL0035dCTL0031dCTL0021* With this patch it exports only the device id's, as properly matchable aliases: alias: pnp:dCTL0070* alias: pnp:dCTL0045* alias: pnp:dCTL0023* alias: pnp:dCTL0044* alias: pnp:dCTL0022* alias: pnp:dCTL0042* alias: pnp:dCTL0041* alias: pnp:dCTL0021* alias: pnp:dCTL0031* Now, the exported value of the PNP bus can be used to autoload a matching module: $ modprobe --first-time -n -v pnp:dCTL0045 insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko $ grep CTL0045 /sys/bus/pnp/devices/*/id /sys/bus/pnp/devices/01:01.00/id:CTL0045 Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-20 23:35:54 +00:00
do_pnp_card_entries(symval, sym->st_size, mod);
else {
struct devtable **p;
INIT_SECTION(__devtable);
for (p = __start___devtable; p < __stop___devtable; p++) {
if (sym_is(name, namelen, (*p)->device_id)) {
do_table(symval, sym->st_size, (*p)->id_size,
(*p)->device_id, (*p)->function, mod);
break;
}
}
}
free(zeros);
}
/* Now add out buffered information to the generated C source */
void add_moddevtable(struct buffer *buf, struct module *mod)
{
buf_printf(buf, "\n");
buf_write(buf, mod->dev_table_buf.p, mod->dev_table_buf.pos);
free(mod->dev_table_buf.p);
}