linux/drivers/gpio/gpio-xilinx.c

403 lines
11 KiB
C
Raw Normal View History

/*
* Xilinx gpio driver for xps/axi_gpio IP.
*
* Copyright 2008 - 2013 Xilinx, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/io.h>
#include <linux/gpio.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
/* Register Offset Definitions */
#define XGPIO_DATA_OFFSET (0x0) /* Data register */
#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
#define XGPIO_CHANNEL_OFFSET 0x8
/* Read/Write access to the GPIO registers */
#if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
# define xgpio_readreg(offset) readl(offset)
# define xgpio_writereg(offset, val) writel(val, offset)
#else
# define xgpio_readreg(offset) __raw_readl(offset)
# define xgpio_writereg(offset, val) __raw_writel(val, offset)
#endif
/**
* struct xgpio_instance - Stores information about GPIO device
* @mmchip: OF GPIO chip for memory mapped banks
* @gpio_width: GPIO width for every channel
* @gpio_state: GPIO state shadow register
* @gpio_dir: GPIO direction shadow register
* @gpio_lock: Lock used for synchronization
*/
struct xgpio_instance {
struct of_mm_gpio_chip mmchip;
unsigned int gpio_width[2];
u32 gpio_state[2];
u32 gpio_dir[2];
spinlock_t gpio_lock[2];
};
static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
{
if (gpio >= chip->gpio_width[0])
return 1;
return 0;
}
static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio)
{
if (xgpio_index(chip, gpio))
return XGPIO_CHANNEL_OFFSET;
return 0;
}
static inline int xgpio_offset(struct xgpio_instance *chip, int gpio)
{
if (xgpio_index(chip, gpio))
return gpio - chip->gpio_width[0];
return gpio;
}
/**
* xgpio_get - Read the specified signal of the GPIO device.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
*
* This function reads the specified signal of the GPIO device.
*
* Return:
* 0 if direction of GPIO signals is set as input otherwise it
* returns negative error value.
*/
static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
u32 val;
val = xgpio_readreg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, gpio));
return !!(val & BIT(xgpio_offset(chip, gpio)));
}
/**
* xgpio_set - Write the specified signal of the GPIO device.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
* @val: Value to be written to specified signal.
*
* This function writes the specified value in to the specified signal of the
* GPIO device.
*/
static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
unsigned long flags;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
int index = xgpio_index(chip, gpio);
int offset = xgpio_offset(chip, gpio);
spin_lock_irqsave(&chip->gpio_lock[index], flags);
/* Write to GPIO signal and set its direction to output */
if (val)
chip->gpio_state[index] |= BIT(offset);
else
chip->gpio_state[index] &= ~BIT(offset);
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
}
/**
* xgpio_set_multiple - Write the specified signals of the GPIO device.
* @gc: Pointer to gpio_chip device structure.
* @mask: Mask of the GPIOS to modify.
* @bits: Value to be wrote on each GPIO
*
* This function writes the specified values into the specified signals of the
* GPIO devices.
*/
static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
unsigned long flags;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
int index = xgpio_index(chip, 0);
int offset, i;
spin_lock_irqsave(&chip->gpio_lock[index], flags);
/* Write to GPIO signals */
for (i = 0; i < gc->ngpio; i++) {
if (*mask == 0)
break;
if (index != xgpio_index(chip, i)) {
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, i),
chip->gpio_state[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
index = xgpio_index(chip, i);
spin_lock_irqsave(&chip->gpio_lock[index], flags);
}
if (__test_and_clear_bit(i, mask)) {
offset = xgpio_offset(chip, i);
if (test_bit(i, bits))
chip->gpio_state[index] |= BIT(offset);
else
chip->gpio_state[index] &= ~BIT(offset);
}
}
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, i), chip->gpio_state[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
}
/**
* xgpio_dir_in - Set the direction of the specified GPIO signal as input.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
*
* Return:
* 0 - if direction of GPIO signals is set as input
* otherwise it returns negative error value.
*/
static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
unsigned long flags;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
int index = xgpio_index(chip, gpio);
int offset = xgpio_offset(chip, gpio);
spin_lock_irqsave(&chip->gpio_lock[index], flags);
/* Set the GPIO bit in shadow register and set direction as input */
chip->gpio_dir[index] |= BIT(offset);
xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
return 0;
}
/**
* xgpio_dir_out - Set the direction of the specified GPIO signal as output.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
* @val: Value to be written to specified signal.
*
* This function sets the direction of specified GPIO signal as output.
*
* Return:
* If all GPIO signals of GPIO chip is configured as input then it returns
* error otherwise it returns 0.
*/
static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
unsigned long flags;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
int index = xgpio_index(chip, gpio);
int offset = xgpio_offset(chip, gpio);
spin_lock_irqsave(&chip->gpio_lock[index], flags);
/* Write state of GPIO signal */
if (val)
chip->gpio_state[index] |= BIT(offset);
else
chip->gpio_state[index] &= ~BIT(offset);
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
/* Clear the GPIO bit in shadow register and set direction as output */
chip->gpio_dir[index] &= ~BIT(offset);
xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
return 0;
}
/**
* xgpio_save_regs - Set initial values of GPIO pins
* @mm_gc: Pointer to memory mapped GPIO chip structure
*/
static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
{
struct xgpio_instance *chip =
container_of(mm_gc, struct xgpio_instance, mmchip);
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]);
xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]);
if (!chip->gpio_width[1])
return;
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET,
chip->gpio_state[1]);
xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET,
chip->gpio_dir[1]);
}
/**
* xgpio_remove - Remove method for the GPIO device.
* @pdev: pointer to the platform device
*
* This function remove gpiochips and frees all the allocated resources.
*
* Return: 0 always
*/
static int xgpio_remove(struct platform_device *pdev)
{
struct xgpio_instance *chip = platform_get_drvdata(pdev);
of_mm_gpiochip_remove(&chip->mmchip);
return 0;
}
/**
* xgpio_of_probe - Probe method for the GPIO device.
* @pdev: pointer to the platform device
*
* Return:
* It returns 0, if the driver is bound to the GPIO device, or
* a negative value if there is an error.
*/
static int xgpio_probe(struct platform_device *pdev)
{
struct xgpio_instance *chip;
int status = 0;
struct device_node *np = pdev->dev.of_node;
u32 is_dual;
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
platform_set_drvdata(pdev, chip);
/* Update GPIO state shadow register with default value */
of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]);
/* Update GPIO direction shadow register with default value */
if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
chip->gpio_dir[0] = 0xFFFFFFFF;
/*
* Check device node and parent device node for device width
* and assume default width of 32
*/
if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0]))
chip->gpio_width[0] = 32;
spin_lock_init(&chip->gpio_lock[0]);
if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
is_dual = 0;
if (is_dual) {
/* Update GPIO state shadow register with default value */
of_property_read_u32(np, "xlnx,dout-default-2",
&chip->gpio_state[1]);
/* Update GPIO direction shadow register with default value */
if (of_property_read_u32(np, "xlnx,tri-default-2",
&chip->gpio_dir[1]))
chip->gpio_dir[1] = 0xFFFFFFFF;
/*
* Check device node and parent device node for device width
* and assume default width of 32
*/
if (of_property_read_u32(np, "xlnx,gpio2-width",
&chip->gpio_width[1]))
chip->gpio_width[1] = 32;
spin_lock_init(&chip->gpio_lock[1]);
}
chip->mmchip.gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1];
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 08:56:26 +00:00
chip->mmchip.gc.parent = &pdev->dev;
2010-06-08 13:48:16 +00:00
chip->mmchip.gc.direction_input = xgpio_dir_in;
chip->mmchip.gc.direction_output = xgpio_dir_out;
chip->mmchip.gc.get = xgpio_get;
chip->mmchip.gc.set = xgpio_set;
chip->mmchip.gc.set_multiple = xgpio_set_multiple;
chip->mmchip.save_regs = xgpio_save_regs;
/* Call the OF gpio helper to setup and register the GPIO device */
status = of_mm_gpiochip_add_data(np, &chip->mmchip, chip);
if (status) {
pr_err("%s: error in probe function with status %d\n",
np->full_name, status);
return status;
}
return 0;
}
static const struct of_device_id xgpio_of_match[] = {
{ .compatible = "xlnx,xps-gpio-1.00.a", },
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(of, xgpio_of_match);
static struct platform_driver xgpio_plat_driver = {
.probe = xgpio_probe,
.remove = xgpio_remove,
.driver = {
.name = "gpio-xilinx",
.of_match_table = xgpio_of_match,
},
};
static int __init xgpio_init(void)
{
return platform_driver_register(&xgpio_plat_driver);
}
subsys_initcall(xgpio_init);
static void __exit xgpio_exit(void)
{
platform_driver_unregister(&xgpio_plat_driver);
}
module_exit(xgpio_exit);
MODULE_AUTHOR("Xilinx, Inc.");
MODULE_DESCRIPTION("Xilinx GPIO driver");
MODULE_LICENSE("GPL");