linux/include/sound/soc-dapm.h

609 lines
25 KiB
C
Raw Normal View History

/*
* linux/sound/soc-dapm.h -- ALSA SoC Dynamic Audio Power Management
*
* Author: Liam Girdwood
* Created: Aug 11th 2005
* Copyright: Wolfson Microelectronics. PLC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __LINUX_SND_SOC_DAPM_H
#define __LINUX_SND_SOC_DAPM_H
#include <linux/types.h>
#include <sound/control.h>
struct device;
/* widget has no PM register bit */
#define SND_SOC_NOPM -1
/*
* SoC dynamic audio power management
*
* We can have up to 4 power domains
* 1. Codec domain - VREF, VMID
* Usually controlled at codec probe/remove, although can be set
* at stream time if power is not needed for sidetone, etc.
* 2. Platform/Machine domain - physically connected inputs and outputs
* Is platform/machine and user action specific, is set in the machine
* driver and by userspace e.g when HP are inserted
* 3. Path domain - Internal codec path mixers
* Are automatically set when mixer and mux settings are
* changed by the user.
* 4. Stream domain - DAC's and ADC's.
* Enabled when stream playback/capture is started.
*/
/* codec domain */
#define SND_SOC_DAPM_VMID(wname) \
{ .id = snd_soc_dapm_vmid, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0}
/* platform domain */
#define SND_SOC_DAPM_SIGGEN(wname) \
{ .id = snd_soc_dapm_siggen, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM }
#define SND_SOC_DAPM_INPUT(wname) \
{ .id = snd_soc_dapm_input, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM }
#define SND_SOC_DAPM_OUTPUT(wname) \
{ .id = snd_soc_dapm_output, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM }
#define SND_SOC_DAPM_MIC(wname, wevent) \
{ .id = snd_soc_dapm_mic, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
#define SND_SOC_DAPM_HP(wname, wevent) \
{ .id = snd_soc_dapm_hp, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_SPK(wname, wevent) \
{ .id = snd_soc_dapm_spk, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_LINE(wname, wevent) \
{ .id = snd_soc_dapm_line, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD}
/* path domain */
#define SND_SOC_DAPM_PGA(wname, wreg, wshift, winvert,\
wcontrols, wncontrols) \
{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols}
#define SND_SOC_DAPM_OUT_DRV(wname, wreg, wshift, winvert,\
wcontrols, wncontrols) \
{ .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols}
#define SND_SOC_DAPM_MIXER(wname, wreg, wshift, winvert, \
wcontrols, wncontrols)\
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols}
#define SND_SOC_DAPM_MIXER_NAMED_CTL(wname, wreg, wshift, winvert, \
wcontrols, wncontrols)\
{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \
.shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \
.num_kcontrols = wncontrols}
#define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \
{ .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = NULL, .num_kcontrols = 0}
#define SND_SOC_DAPM_SWITCH(wname, wreg, wshift, winvert, wcontrols) \
{ .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1}
#define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \
{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1}
#define SND_SOC_DAPM_VIRT_MUX(wname, wreg, wshift, winvert, wcontrols) \
{ .id = snd_soc_dapm_virt_mux, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1}
#define SND_SOC_DAPM_VALUE_MUX(wname, wreg, wshift, winvert, wcontrols) \
{ .id = snd_soc_dapm_value_mux, .name = wname, .reg = wreg, \
.shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \
.num_kcontrols = 1}
/* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */
#define SOC_PGA_ARRAY(wname, wreg, wshift, winvert,\
wcontrols) \
{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)}
#define SOC_MIXER_ARRAY(wname, wreg, wshift, winvert, \
wcontrols)\
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)}
#define SOC_MIXER_NAMED_CTL_ARRAY(wname, wreg, wshift, winvert, \
wcontrols)\
{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \
.shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \
.num_kcontrols = ARRAY_SIZE(wcontrols)}
/* path domain with event - event handler must return 0 for success */
#define SND_SOC_DAPM_PGA_E(wname, wreg, wshift, winvert, wcontrols, \
wncontrols, wevent, wflags) \
{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_OUT_DRV_E(wname, wreg, wshift, winvert, wcontrols, \
wncontrols, wevent, wflags) \
{ .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_MIXER_E(wname, wreg, wshift, winvert, wcontrols, \
wncontrols, wevent, wflags) \
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_MIXER_NAMED_CTL_E(wname, wreg, wshift, winvert, \
wcontrols, wncontrols, wevent, wflags) \
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, \
.num_kcontrols = wncontrols, .event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \
wevent, wflags) \
{ .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \
wevent, wflags) \
{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_VIRT_MUX_E(wname, wreg, wshift, winvert, wcontrols, \
wevent, wflags) \
{ .id = snd_soc_dapm_virt_mux, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \
.event = wevent, .event_flags = wflags}
/* additional sequencing control within an event type */
#define SND_SOC_DAPM_PGA_S(wname, wsubseq, wreg, wshift, winvert, \
wevent, wflags) \
{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .event = wevent, .event_flags = wflags, \
.subseq = wsubseq}
#define SND_SOC_DAPM_SUPPLY_S(wname, wsubseq, wreg, wshift, winvert, wevent, \
wflags) \
{ .id = snd_soc_dapm_supply, .name = wname, .reg = wreg, \
.shift = wshift, .invert = winvert, .event = wevent, \
.event_flags = wflags, .subseq = wsubseq}
/* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */
#define SOC_PGA_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \
wevent, wflags) \
{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \
.event = wevent, .event_flags = wflags}
#define SOC_MIXER_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \
wevent, wflags) \
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \
.event = wevent, .event_flags = wflags}
#define SOC_MIXER_NAMED_CTL_E_ARRAY(wname, wreg, wshift, winvert, \
wcontrols, wevent, wflags) \
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrol_news = wcontrols, \
.num_kcontrols = ARRAY_SIZE(wcontrols), .event = wevent, .event_flags = wflags}
/* events that are pre and post DAPM */
#define SND_SOC_DAPM_PRE(wname, wevent) \
{ .id = snd_soc_dapm_pre, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD}
#define SND_SOC_DAPM_POST(wname, wevent) \
{ .id = snd_soc_dapm_post, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \
.event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD}
/* stream domain */
#define SND_SOC_DAPM_AIF_IN(wname, stname, wslot, wreg, wshift, winvert) \
{ .id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, \
.reg = wreg, .shift = wshift, .invert = winvert }
#define SND_SOC_DAPM_AIF_IN_E(wname, stname, wslot, wreg, wshift, winvert, \
wevent, wflags) \
{ .id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, \
.reg = wreg, .shift = wshift, .invert = winvert, \
.event = wevent, .event_flags = wflags }
#define SND_SOC_DAPM_AIF_OUT(wname, stname, wslot, wreg, wshift, winvert) \
{ .id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, \
.reg = wreg, .shift = wshift, .invert = winvert }
#define SND_SOC_DAPM_AIF_OUT_E(wname, stname, wslot, wreg, wshift, winvert, \
wevent, wflags) \
{ .id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, \
.reg = wreg, .shift = wshift, .invert = winvert, \
.event = wevent, .event_flags = wflags }
#define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \
{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
.shift = wshift, .invert = winvert}
#define SND_SOC_DAPM_DAC_E(wname, stname, wreg, wshift, winvert, \
wevent, wflags) \
{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \
.shift = wshift, .invert = winvert, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_ADC(wname, stname, wreg, wshift, winvert) \
{ .id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
.shift = wshift, .invert = winvert}
#define SND_SOC_DAPM_ADC_E(wname, stname, wreg, wshift, winvert, \
wevent, wflags) \
{ .id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \
.shift = wshift, .invert = winvert, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_CLOCK_SUPPLY(wname) \
{ .id = snd_soc_dapm_clock_supply, .name = wname, \
.reg = SND_SOC_NOPM, .event = dapm_clock_event, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD }
/* generic widgets */
#define SND_SOC_DAPM_REG(wid, wname, wreg, wshift, wmask, won_val, woff_val) \
{ .id = wid, .name = wname, .kcontrol_news = NULL, .num_kcontrols = 0, \
.reg = -((wreg) + 1), .shift = wshift, .mask = wmask, \
.on_val = won_val, .off_val = woff_val, .event = dapm_reg_event, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD}
#define SND_SOC_DAPM_SUPPLY(wname, wreg, wshift, winvert, wevent, wflags) \
{ .id = snd_soc_dapm_supply, .name = wname, .reg = wreg, \
.shift = wshift, .invert = winvert, .event = wevent, \
.event_flags = wflags}
#define SND_SOC_DAPM_REGULATOR_SUPPLY(wname, wdelay, wflags) \
{ .id = snd_soc_dapm_regulator_supply, .name = wname, \
.reg = SND_SOC_NOPM, .shift = wdelay, .event = dapm_regulator_event, \
.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD, \
.invert = wflags}
/* dapm kcontrol types */
#define SOC_DAPM_SINGLE(xname, reg, shift, max, invert) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_volsw, \
.get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) }
#define SOC_DAPM_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_volsw, \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) }
#define SOC_DAPM_ENUM(xname, xenum) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_enum_double, \
.get = snd_soc_dapm_get_enum_double, \
.put = snd_soc_dapm_put_enum_double, \
.private_value = (unsigned long)&xenum }
#define SOC_DAPM_ENUM_VIRT(xname, xenum) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_enum_double, \
.get = snd_soc_dapm_get_enum_virt, \
.put = snd_soc_dapm_put_enum_virt, \
.private_value = (unsigned long)&xenum }
#define SOC_DAPM_ENUM_EXT(xname, xenum, xget, xput) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_enum_double, \
.get = xget, \
.put = xput, \
.private_value = (unsigned long)&xenum }
#define SOC_DAPM_VALUE_ENUM(xname, xenum) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_enum_double, \
.get = snd_soc_dapm_get_value_enum_double, \
.put = snd_soc_dapm_put_value_enum_double, \
.private_value = (unsigned long)&xenum }
#define SOC_DAPM_PIN_SWITCH(xname) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname " Switch", \
.info = snd_soc_dapm_info_pin_switch, \
.get = snd_soc_dapm_get_pin_switch, \
.put = snd_soc_dapm_put_pin_switch, \
.private_value = (unsigned long)xname }
/* dapm stream operations */
#define SND_SOC_DAPM_STREAM_NOP 0x0
#define SND_SOC_DAPM_STREAM_START 0x1
#define SND_SOC_DAPM_STREAM_STOP 0x2
#define SND_SOC_DAPM_STREAM_SUSPEND 0x4
#define SND_SOC_DAPM_STREAM_RESUME 0x8
#define SND_SOC_DAPM_STREAM_PAUSE_PUSH 0x10
#define SND_SOC_DAPM_STREAM_PAUSE_RELEASE 0x20
/* dapm event types */
#define SND_SOC_DAPM_PRE_PMU 0x1 /* before widget power up */
#define SND_SOC_DAPM_POST_PMU 0x2 /* after widget power up */
#define SND_SOC_DAPM_PRE_PMD 0x4 /* before widget power down */
#define SND_SOC_DAPM_POST_PMD 0x8 /* after widget power down */
#define SND_SOC_DAPM_PRE_REG 0x10 /* before audio path setup */
#define SND_SOC_DAPM_POST_REG 0x20 /* after audio path setup */
#define SND_SOC_DAPM_WILL_PMU 0x40 /* called at start of sequence */
#define SND_SOC_DAPM_WILL_PMD 0x80 /* called at start of sequence */
#define SND_SOC_DAPM_PRE_POST_PMD \
(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
/* convenience event type detection */
#define SND_SOC_DAPM_EVENT_ON(e) \
(e & (SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU))
#define SND_SOC_DAPM_EVENT_OFF(e) \
(e & (SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD))
/* regulator widget flags */
#define SND_SOC_DAPM_REGULATOR_BYPASS 0x1 /* bypass when disabled */
struct snd_soc_dapm_widget;
enum snd_soc_dapm_type;
struct snd_soc_dapm_path;
struct snd_soc_dapm_pin;
struct snd_soc_dapm_route;
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
struct snd_soc_dapm_context;
struct regulator;
struct snd_soc_dapm_widget_list;
int dapm_reg_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event);
int dapm_regulator_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event);
int dapm_clock_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event);
/* dapm controls */
int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_get_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_get_enum_virt(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_put_enum_virt(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_get_value_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_dapm_info_pin_switch(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
int snd_soc_dapm_get_pin_switch(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *uncontrol);
int snd_soc_dapm_put_pin_switch(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *uncontrol);
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
int snd_soc_dapm_new_controls(struct snd_soc_dapm_context *dapm,
const struct snd_soc_dapm_widget *widget,
int num);
ASoC: dapm: Implement and instantiate DAI widgets In order to allow us to do smarter things with DAI links create DAPM widgets which directly represent the DAIs in the DAPM graph. These are automatically created from the DAIs as we probe the card with references held in both directions between the widget and the DAI. The widgets are not made available for direct instantiation by drivers, they are created automatically from the DAIs. Drivers should be updated to create stream routes using DAPM maps rather than by annotating AIF and DAC widgets with streams. In order to ease transition to this model from existing drivers we automatically create DAPM routes between the DAI widgets and the existing stream widgets which are started and stopped by the DAI widgets, though the old stream handling mechanism is still in place. This also has the nice effect of removing non-DAPM devices as any device with a DAI acquires a widget automatically which will allow future simplifications to the core DAPM logic. The intention is that in future the AIF and DAI widgets will gain the ability to interact such that we are able to manage activity on individual channels independantly rather than powering up and down the entire AIF as we do currently. Currently we only generate these for CODECs, mostly as I have no systems with non-CODEC DAPM to integrate with. It should be a simple matter of programming to add the additional hookup for these. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-02-17 03:37:51 +00:00
int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm,
struct snd_soc_dai *dai);
int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card);
ASoC: core: Support transparent CODEC<->CODEC DAI links Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-04 21:12:09 +00:00
int snd_soc_dapm_new_pcm(struct snd_soc_card *card,
const struct snd_soc_pcm_stream *params,
struct snd_soc_dapm_widget *source,
struct snd_soc_dapm_widget *sink);
/* dapm path setup */
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm);
void snd_soc_dapm_free(struct snd_soc_dapm_context *dapm);
int snd_soc_dapm_add_routes(struct snd_soc_dapm_context *dapm,
const struct snd_soc_dapm_route *route, int num);
int snd_soc_dapm_del_routes(struct snd_soc_dapm_context *dapm,
const struct snd_soc_dapm_route *route, int num);
int snd_soc_dapm_weak_routes(struct snd_soc_dapm_context *dapm,
const struct snd_soc_dapm_route *route, int num);
/* dapm events */
void snd_soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, int stream,
int event);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 20:15:21 +00:00
void snd_soc_dapm_shutdown(struct snd_soc_card *card);
/* external DAPM widget events */
ASoC: dapm: Run widget updates for shared controls at the same time Currently when updating a control that is shared between multiple widgets the whole power-up/power-down sequence is being run once for each widget. The control register is updated during the first run, which means the CODEC internal routing is also updated for all widgets during this first run. The input and output paths for each widgets are only updated though during the respective run for that widget. This leads to a slight inconsistency between the CODEC's internal state and ASoC's state, which causes non optimal behavior in regard to click and pop avoidance. E.g. consider the following setup where two MUXs share the same control. +------+ A1 ------| | | MUX1 |----- C1 B1 ------| | +------+ | control ---+ | +------+ A2 ------| | | MUX2 |----- C2 B2 ------| | +------+ If the control is updated to switch the MUXs from input A to input B with the current code the power-up/power-down sequence will look like this: Run soc_dapm_mux_update_power for MUX1 Power-down A1 Update MUXing Power-up B1 Run soc_dapm_mux_update_power for MUX2 Power-down A2 (Update MUXing) Power-up B2 Note that the second 'Update Muxing' is a no-op, since the register was already updated. While the preferred order for avoiding pops and clicks should be: Run soc_dapm_mux_update_power for control Power-down A1 Power-down A2 Update MUXing Power-up B1 Power-up B2 This patch changes the behavior to the later by running the updates for all widgets that the control is attached to at the same time. The new code is also a bit simpler since callers of soc_dapm_{mux,muxer}_update_power don't have to loop over each widget anymore and neither do we need to keep track for which of the kcontrol's widgets the current update is. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24 13:27:37 +00:00
int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_context *dapm,
struct snd_kcontrol *kcontrol, int connect);
ASoC: dapm: Run widget updates for shared controls at the same time Currently when updating a control that is shared between multiple widgets the whole power-up/power-down sequence is being run once for each widget. The control register is updated during the first run, which means the CODEC internal routing is also updated for all widgets during this first run. The input and output paths for each widgets are only updated though during the respective run for that widget. This leads to a slight inconsistency between the CODEC's internal state and ASoC's state, which causes non optimal behavior in regard to click and pop avoidance. E.g. consider the following setup where two MUXs share the same control. +------+ A1 ------| | | MUX1 |----- C1 B1 ------| | +------+ | control ---+ | +------+ A2 ------| | | MUX2 |----- C2 B2 ------| | +------+ If the control is updated to switch the MUXs from input A to input B with the current code the power-up/power-down sequence will look like this: Run soc_dapm_mux_update_power for MUX1 Power-down A1 Update MUXing Power-up B1 Run soc_dapm_mux_update_power for MUX2 Power-down A2 (Update MUXing) Power-up B2 Note that the second 'Update Muxing' is a no-op, since the register was already updated. While the preferred order for avoiding pops and clicks should be: Run soc_dapm_mux_update_power for control Power-down A1 Power-down A2 Update MUXing Power-up B1 Power-up B2 This patch changes the behavior to the later by running the updates for all widgets that the control is attached to at the same time. The new code is also a bit simpler since callers of soc_dapm_{mux,muxer}_update_power don't have to loop over each widget anymore and neither do we need to keep track for which of the kcontrol's widgets the current update is. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-24 13:27:37 +00:00
int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_context *dapm,
struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e);
/* dapm sys fs - used by the core */
int snd_soc_dapm_sys_add(struct device *dev);
void snd_soc_dapm_debugfs_init(struct snd_soc_dapm_context *dapm,
struct dentry *parent);
/* dapm audio pin control and status */
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
int snd_soc_dapm_enable_pin(struct snd_soc_dapm_context *dapm,
const char *pin);
int snd_soc_dapm_disable_pin(struct snd_soc_dapm_context *dapm,
const char *pin);
int snd_soc_dapm_nc_pin(struct snd_soc_dapm_context *dapm, const char *pin);
int snd_soc_dapm_get_pin_status(struct snd_soc_dapm_context *dapm,
const char *pin);
int snd_soc_dapm_sync(struct snd_soc_dapm_context *dapm);
int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm,
const char *pin);
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
int snd_soc_dapm_ignore_suspend(struct snd_soc_dapm_context *dapm,
const char *pin);
void snd_soc_dapm_auto_nc_codec_pins(struct snd_soc_codec *codec);
/* Mostly internal - should not normally be used */
void dapm_mark_dirty(struct snd_soc_dapm_widget *w, const char *reason);
void dapm_mark_io_dirty(struct snd_soc_dapm_context *dapm);
/* dapm path query */
int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream,
struct snd_soc_dapm_widget_list **list);
/* dapm widget types */
enum snd_soc_dapm_type {
snd_soc_dapm_input = 0, /* input pin */
snd_soc_dapm_output, /* output pin */
snd_soc_dapm_mux, /* selects 1 analog signal from many inputs */
snd_soc_dapm_virt_mux, /* virtual version of snd_soc_dapm_mux */
snd_soc_dapm_value_mux, /* selects 1 analog signal from many inputs */
snd_soc_dapm_mixer, /* mixes several analog signals together */
snd_soc_dapm_mixer_named_ctl, /* mixer with named controls */
snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */
snd_soc_dapm_out_drv, /* output driver */
snd_soc_dapm_adc, /* analog to digital converter */
snd_soc_dapm_dac, /* digital to analog converter */
snd_soc_dapm_micbias, /* microphone bias (power) */
snd_soc_dapm_mic, /* microphone */
snd_soc_dapm_hp, /* headphones */
snd_soc_dapm_spk, /* speaker */
snd_soc_dapm_line, /* line input/output */
snd_soc_dapm_switch, /* analog switch */
snd_soc_dapm_vmid, /* codec bias/vmid - to minimise pops */
snd_soc_dapm_pre, /* machine specific pre widget - exec first */
snd_soc_dapm_post, /* machine specific post widget - exec last */
snd_soc_dapm_supply, /* power/clock supply */
snd_soc_dapm_regulator_supply, /* external regulator */
snd_soc_dapm_clock_supply, /* external clock */
snd_soc_dapm_aif_in, /* audio interface input */
snd_soc_dapm_aif_out, /* audio interface output */
snd_soc_dapm_siggen, /* signal generator */
snd_soc_dapm_dai_in, /* link to DAI structure */
snd_soc_dapm_dai_out,
ASoC: core: Support transparent CODEC<->CODEC DAI links Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-04 21:12:09 +00:00
snd_soc_dapm_dai_link, /* link between two DAI structures */
};
enum snd_soc_dapm_subclass {
SND_SOC_DAPM_CLASS_INIT = 0,
SND_SOC_DAPM_CLASS_RUNTIME = 1,
};
/*
* DAPM audio route definition.
*
* Defines an audio route originating at source via control and finishing
* at sink.
*/
struct snd_soc_dapm_route {
const char *sink;
const char *control;
const char *source;
/* Note: currently only supported for links where source is a supply */
int (*connected)(struct snd_soc_dapm_widget *source,
struct snd_soc_dapm_widget *sink);
};
/* dapm audio path between two widgets */
struct snd_soc_dapm_path {
const char *name;
/* source (input) and sink (output) widgets */
struct snd_soc_dapm_widget *source;
struct snd_soc_dapm_widget *sink;
struct snd_kcontrol *kcontrol;
/* status */
u32 connect:1; /* source and sink widgets are connected */
u32 walked:1; /* path has been walked */
u32 walking:1; /* path is in the process of being walked */
u32 weak:1; /* path ignored for power management */
int (*connected)(struct snd_soc_dapm_widget *source,
struct snd_soc_dapm_widget *sink);
struct list_head list_source;
struct list_head list_sink;
struct list_head list;
};
/* dapm widget */
struct snd_soc_dapm_widget {
enum snd_soc_dapm_type id;
const char *name; /* widget name */
const char *sname; /* stream name */
struct snd_soc_codec *codec;
struct snd_soc_platform *platform;
struct list_head list;
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
struct snd_soc_dapm_context *dapm;
void *priv; /* widget specific data */
struct regulator *regulator; /* attached regulator */
ASoC: core: Support transparent CODEC<->CODEC DAI links Rather than having the user half start a stream but avoid any DMA to trigger data flow on links which don't pass through the CPU create a DAPM route between the two DAI widgets using a hw_params configuration provided by the machine driver with the new 'params' member of the dai_link struct. If no configuration is provided in the dai_link then use the old style even for CODEC<->CODEC links to avoid breaking systems. This greatly simplifies the userspace usage of such links, making them as simple as analogue connections with the stream configuration being completely transparent to them. This is achieved by defining a new dai_link widget type which is created when CODECs are linked and triggering the configuration of the link via the normal PCM operations from there. It is expected that the bias level callbacks will be used for clock configuration. Currently only the DAI format, rate and channel count can be configured and currently the only DAI operations which can be called are hw_params and digital_mute(). This corresponds well to the majority of CODEC drivers which only use other callbacks for constraint setting but there is obviously much room for extension here. We can't simply call hw_params() on startup as things like the system clocking configuration may change at runtime and in future it will be desirable to offer some configurability of the link parameters. At present we are also restricted to a single DAPM link for the entire DAI. Once we have better support for channel mapping it would also be desirable to extend this feature so that we can propagate per-channel power state over the link. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-04-04 21:12:09 +00:00
const struct snd_soc_pcm_stream *params; /* params for dai links */
/* dapm control */
int reg; /* negative reg = no direct dapm */
unsigned char shift; /* bits to shift */
unsigned int value; /* widget current value */
unsigned int mask; /* non-shifted mask */
unsigned int on_val; /* on state value */
unsigned int off_val; /* off state value */
unsigned char power:1; /* block power status */
unsigned char invert:1; /* invert the power bit */
unsigned char active:1; /* active stream on DAC, ADC's */
unsigned char connected:1; /* connected codec pin */
unsigned char new:1; /* cnew complete */
unsigned char ext:1; /* has external widgets */
unsigned char force:1; /* force state */
unsigned char ignore_suspend:1; /* kept enabled over suspend */
unsigned char new_power:1; /* power from this run */
unsigned char power_checked:1; /* power checked this run */
int subseq; /* sort within widget type */
int (*power_check)(struct snd_soc_dapm_widget *w);
/* external events */
unsigned short event_flags; /* flags to specify event types */
int (*event)(struct snd_soc_dapm_widget*, struct snd_kcontrol *, int);
/* kcontrols that relate to this widget */
int num_kcontrols;
const struct snd_kcontrol_new *kcontrol_news;
struct snd_kcontrol **kcontrols;
/* widget input and outputs */
struct list_head sources;
struct list_head sinks;
/* used during DAPM updates */
struct list_head power_list;
struct list_head dirty;
int inputs;
int outputs;
struct clk *clk;
};
struct snd_soc_dapm_update {
struct snd_kcontrol *kcontrol;
int reg;
int mask;
int val;
};
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
/* DAPM context */
struct snd_soc_dapm_context {
enum snd_soc_bias_level bias_level;
enum snd_soc_bias_level suspend_bias_level;
struct delayed_work delayed_work;
unsigned int idle_bias_off:1; /* Use BIAS_OFF instead of STANDBY */
struct snd_soc_dapm_update *update;
void (*seq_notifier)(struct snd_soc_dapm_context *,
enum snd_soc_dapm_type, int);
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
struct device *dev; /* from parent - for debug */
struct snd_soc_codec *codec; /* parent codec */
struct snd_soc_platform *platform; /* parent platform */
struct snd_soc_card *card; /* parent card */
/* used during DAPM updates */
enum snd_soc_bias_level target_bias_level;
struct list_head list;
int (*stream_event)(struct snd_soc_dapm_context *dapm, int event);
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 13:53:46 +00:00
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_dapm;
#endif
};
/* A list of widgets associated with an object, typically a snd_kcontrol */
struct snd_soc_dapm_widget_list {
int num_widgets;
struct snd_soc_dapm_widget *widgets[0];
};
struct snd_soc_dapm_stats {
int power_checks;
int path_checks;
int neighbour_checks;
};
#endif