linux/drivers/net/e1000/e1000.h

291 lines
8.2 KiB
C
Raw Normal View History

/*******************************************************************************
Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
The full GNU General Public License is included in this distribution in the
file called LICENSE.
Contact Information:
Linux NICS <linux.nics@intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
/* Linux PRO/1000 Ethernet Driver main header file */
#ifndef _E1000_H_
#define _E1000_H_
#include <linux/stddef.h>
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/pagemap.h>
#include <linux/dma-mapping.h>
#include <linux/bitops.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/capability.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <net/pkt_sched.h>
#include <linux/list.h>
#include <linux/reboot.h>
#ifdef NETIF_F_TSO
#include <net/checksum.h>
#endif
#include <linux/workqueue.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#define BAR_0 0
#define BAR_1 1
#define BAR_5 5
#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
struct e1000_adapter;
#include "e1000_hw.h"
#ifdef DBG
#define E1000_DBG(args...) printk(KERN_DEBUG "e1000: " args)
#else
#define E1000_DBG(args...)
#endif
#define E1000_ERR(args...) printk(KERN_ERR "e1000: " args)
#define PFX "e1000: "
#define DPRINTK(nlevel, klevel, fmt, args...) \
(void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
printk(KERN_##klevel PFX "%s: %s: " fmt, adapter->netdev->name, \
__FUNCTION__ , ## args))
#define E1000_MAX_INTR 10
/* TX/RX descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 256
#define E1000_MIN_TXD 80
#define E1000_MAX_82544_TXD 4096
#define E1000_DEFAULT_RXD 256
#define E1000_MAX_RXD 256
#define E1000_MIN_RXD 80
#define E1000_MAX_82544_RXD 4096
/* Supported Rx Buffer Sizes */
#define E1000_RXBUFFER_128 128 /* Used for packet split */
#define E1000_RXBUFFER_256 256 /* Used for packet split */
#define E1000_RXBUFFER_2048 2048
#define E1000_RXBUFFER_4096 4096
#define E1000_RXBUFFER_8192 8192
#define E1000_RXBUFFER_16384 16384
/* SmartSpeed delimiters */
#define E1000_SMARTSPEED_DOWNSHIFT 3
#define E1000_SMARTSPEED_MAX 15
/* Packet Buffer allocations */
#define E1000_PBA_BYTES_SHIFT 0xA
#define E1000_TX_HEAD_ADDR_SHIFT 7
#define E1000_PBA_TX_MASK 0xFFFF0000
/* Flow Control Watermarks */
#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
#define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
/* How many Tx Descriptors do we need to call netif_wake_queue ? */
#define E1000_TX_QUEUE_WAKE 16
/* How many Rx Buffers do we bundle into one write to the hardware ? */
#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
#define AUTO_ALL_MODES 0
#define E1000_EEPROM_82544_APM 0x0004
#define E1000_EEPROM_APME 0x0400
#ifndef E1000_MASTER_SLAVE
/* Switch to override PHY master/slave setting */
#define E1000_MASTER_SLAVE e1000_ms_hw_default
#endif
#define E1000_MNG_VLAN_NONE -1
/* Number of packet split data buffers (not including the header buffer) */
#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1
/* only works for sizes that are powers of 2 */
#define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1)))
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct e1000_buffer {
struct sk_buff *skb;
dma_addr_t dma;
unsigned long time_stamp;
uint16_t length;
uint16_t next_to_watch;
};
struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; };
struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; };
struct e1000_desc_ring {
/* pointer to the descriptor ring memory */
void *desc;
/* physical address of the descriptor ring */
dma_addr_t dma;
/* length of descriptor ring in bytes */
unsigned int size;
/* number of descriptors in the ring */
unsigned int count;
/* next descriptor to associate a buffer with */
unsigned int next_to_use;
/* next descriptor to check for DD status bit */
unsigned int next_to_clean;
/* array of buffer information structs */
struct e1000_buffer *buffer_info;
/* arrays of page information for packet split */
struct e1000_ps_page *ps_page;
struct e1000_ps_page_dma *ps_page_dma;
};
#define E1000_DESC_UNUSED(R) \
((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
(R)->next_to_clean - (R)->next_to_use - 1)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
#define E1000_RX_DESC_EXT(R, i) \
(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
/* board specific private data structure */
struct e1000_adapter {
struct timer_list tx_fifo_stall_timer;
struct timer_list watchdog_timer;
struct timer_list phy_info_timer;
struct vlan_group *vlgrp;
uint16_t mng_vlan_id;
uint32_t bd_number;
uint32_t rx_buffer_len;
uint32_t part_num;
uint32_t wol;
uint32_t smartspeed;
uint32_t en_mng_pt;
uint16_t link_speed;
uint16_t link_duplex;
spinlock_t stats_lock;
atomic_t irq_sem;
struct work_struct tx_timeout_task;
struct work_struct watchdog_task;
uint8_t fc_autoneg;
struct timer_list blink_timer;
unsigned long led_status;
/* TX */
struct e1000_desc_ring tx_ring;
struct e1000_buffer previous_buffer_info;
spinlock_t tx_lock;
uint32_t txd_cmd;
uint32_t tx_int_delay;
uint32_t tx_abs_int_delay;
uint32_t gotcl;
uint64_t gotcl_old;
uint64_t tpt_old;
uint64_t colc_old;
uint32_t tx_fifo_head;
uint32_t tx_head_addr;
uint32_t tx_fifo_size;
atomic_t tx_fifo_stall;
boolean_t pcix_82544;
boolean_t detect_tx_hung;
/* RX */
#ifdef CONFIG_E1000_NAPI
boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done,
int work_to_do);
#else
boolean_t (*clean_rx) (struct e1000_adapter *adapter);
#endif
void (*alloc_rx_buf) (struct e1000_adapter *adapter);
struct e1000_desc_ring rx_ring;
uint64_t hw_csum_err;
uint64_t hw_csum_good;
uint32_t rx_int_delay;
uint32_t rx_abs_int_delay;
boolean_t rx_csum;
boolean_t rx_ps;
uint32_t gorcl;
uint64_t gorcl_old;
uint16_t rx_ps_bsize0;
/* Interrupt Throttle Rate */
uint32_t itr;
/* OS defined structs */
struct net_device *netdev;
struct pci_dev *pdev;
struct net_device_stats net_stats;
/* structs defined in e1000_hw.h */
struct e1000_hw hw;
struct e1000_hw_stats stats;
struct e1000_phy_info phy_info;
struct e1000_phy_stats phy_stats;
uint32_t test_icr;
struct e1000_desc_ring test_tx_ring;
struct e1000_desc_ring test_rx_ring;
int msg_enable;
#ifdef CONFIG_PCI_MSI
boolean_t have_msi;
#endif
};
#endif /* _E1000_H_ */