FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-28 12:25:31 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
d9b55a0361
linux/include/asm-powerpc/udbg.h

54 lines
1.7 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 00:54:09 +00:00
* (c) 2001, 2006 IBM Corporation.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
[PATCH] powerpc: Move udbg code to arch/powerpc Since the udbg code in ppc64 has no ppc32 equivalent, move it straight over into arch/powerpc (and include/asm-powerpc for udbg.h). In time, we probably want to meld the various bits and pieces of 32-bit early debugging code into udbg, but for now only include it on CONFIG_PPC64=y builds. The only change during the move is to standardise the protecting #ifdef/#define in udbg.h, and move its banner comment above the initial #ifdef (which seems to be normal practice). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32bit multiplatform (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 05:42:12 +00:00
#ifndef _ASM_POWERPC_UDBG_H
#define _ASM_POWERPC_UDBG_H
[PATCH] powerpc: sanitize header files for user space includes include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-16 21:43:46 +00:00
#ifdef __KERNEL__
[PATCH] powerpc: Move udbg code to arch/powerpc Since the udbg code in ppc64 has no ppc32 equivalent, move it straight over into arch/powerpc (and include/asm-powerpc for udbg.h). In time, we probably want to meld the various bits and pieces of 32-bit early debugging code into udbg, but for now only include it on CONFIG_PPC64=y builds. The only change during the move is to standardise the protecting #ifdef/#define in udbg.h, and move its banner comment above the initial #ifdef (which seems to be normal practice). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32bit multiplatform (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 05:42:12 +00:00
#include <linux/compiler.h>
#include <linux/init.h>
[PATCH] powerpc: Unify udbg (#2) This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-23 06:57:25 +00:00
extern void (*udbg_putc)(char c);
[PATCH] powerpc: udbg updates The udbg low level io layer has an issue with udbg_getc() returning a char (unsigned on ppc) instead of an int, thus the -1 if you had no available input device could end up turned into 0xff, filling your display with bogus characters. This fixes it, along with adding a little blob to xmon to do a delay before exiting when getting an EOF and fixing the detection of ADB keyboards in udbg_adb.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-30 05:54:12 +00:00
extern int (*udbg_getc)(void);
[PATCH] ppc64: Take udbg out of ppc_md Take udbg out of ppc_md. Allows us to not overwrite early udbg inits when assigning ppc_md. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-06 01:56:42 +00:00
extern int (*udbg_getc_poll)(void);
extern void udbg_puts(const char *s);
extern int udbg_write(const char *s, int n);
extern int udbg_read(char *buf, int buflen);
[PATCH] ppc64: Consolidate early console and PPCDBG code Consolidate the early console and PPCDBG code in udbg.c Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-06 01:57:27 +00:00
extern void register_early_udbg_console(void);
[PATCH] powerpc: udbg_printf() formatting attribute This patch allows the compiler to catch any printf-like mismatches for udbg_printf(). After some brute force building I've only found issues with my own code and lparcfg.c It could break some developers, but IMHO that would be goodness. Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-17 16:00:35 +00:00
extern void udbg_printf(const char *fmt, ...)
__attribute__ ((format (printf, 1, 2)));
[PATCH] powerpc: added a udbg_progress Added a common udbg_progress for use by ppc_md.progress() Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-20 22:37:07 +00:00
extern void udbg_progress(char *s, unsigned short hex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] powerpc: serial port discovery (#2) This moves the discovery of legacy serial ports to a separate file, makes it common to ppc32 and ppc64, and reworks it to use the new OF address translators to get to the ports early. This new version can also detect some PCI serial cards using legacy chips and will probably match those discovered port with the default console choice. Only ppc64 gets udbg still yet, unifying udbg isn't finished yet. It also adds some speed-probing code to udbg so that the default console can come up at the same speed it was set to by the firmware. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-23 06:56:06 +00:00
extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
unsigned int clock);
extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
unsigned int clock);
powerpc: Merge in 64-bit powermac support. This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to arch/powerpc/platforms/powermac/*.c and makes various minor tweaks elsewhere. On the powermac we now initialize ppc_md by copying the whole pmac_md structure into it, which required some changes in the ordering of initializations of individual fields of it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 06:02:39 +00:00
struct device_node;
[PATCH] powerpc: Unify udbg (#2) This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-23 06:57:25 +00:00
extern void udbg_scc_init(int force_scc);
extern int udbg_adb_init(int force_btext);
extern void udbg_adb_init_early(void);
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 00:54:09 +00:00
extern void __init udbg_early_init(void);
extern void __init udbg_init_debug_lpar(void);
extern void __init udbg_init_pmac_realmode(void);
extern void __init udbg_init_maple_realmode(void);
[POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-04 22:36:49 +00:00
extern void __init udbg_init_pas_realmode(void);
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 00:54:09 +00:00
extern void __init udbg_init_iseries(void);
[POWERPC] Add udbg support for RTAS console Add udbg hooks for the RTAS console, based on the RTAS put-term-char and get-term-char calls. Along with my previous patches, this should enable debugging as soon as early_init_dt_scan_rtas() is called. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-23 08:20:16 +00:00
extern void __init udbg_init_rtas_panel(void);
extern void __init udbg_init_rtas_console(void);
[POWERPC] Celleb: support udbg This patch adds udbg support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-02 07:43:21 +00:00
extern void __init udbg_init_debug_beat(void);
[POWERPC] Use udbg_early_init() on ppc32 udbg_early_init() is a function used on 64 bit systems, which initializes whichever early udbg backend is configured. This function is not called on 32-bit, however if btext early debug is enabled it does have an explicit, inline, #ifdef-ed assignment performing analagous initialization. This patch makes things more uniform by folding the btext initialization as an option into udbg_early_init() and calling that from the 32-bit setup path. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 04:54:22 +00:00
extern void __init udbg_init_btext(void);
[POWERPC] Early serial debug support for PPC44x This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 02:59:31 +00:00
extern void __init udbg_init_44x_as1(void);
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 00:54:09 +00:00
[PATCH] powerpc: sanitize header files for user space includes include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-16 21:43:46 +00:00
#endif /* __KERNEL__ */
[PATCH] powerpc: Move udbg code to arch/powerpc Since the udbg code in ppc64 has no ppc32 equivalent, move it straight over into arch/powerpc (and include/asm-powerpc for udbg.h). In time, we probably want to meld the various bits and pieces of 32-bit early debugging code into udbg, but for now only include it on CONFIG_PPC64=y builds. The only change during the move is to standardise the protecting #ifdef/#define in udbg.h, and move its banner comment above the initial #ifdef (which seems to be normal practice). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32bit multiplatform (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 05:42:12 +00:00
#endif /* _ASM_POWERPC_UDBG_H */
Reference in New Issue Copy Permalink