mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-18 15:09:53 +00:00
44 lines
1.5 KiB
Plaintext
44 lines
1.5 KiB
Plaintext
|
Last Reviewed: 10/05/2007
|
||
|
|
|
||
|
|
WDT Watchdog Timer Interfaces For The Linux Operating System
|
||
|
|
Alan Cox <alan@lxorguk.ukuu.org.uk>
|
||
|
|
|
||
|
|
ICS WDT501-P
|
||
|
|
ICS WDT501-P (no fan tachometer)
|
||
|
|
ICS WDT500-P
|
||
|
|
|
||
|
|
All the interfaces provide /dev/watchdog, which when open must be written
|
||
|
|
to within a timeout or the machine will reboot. Each write delays the reboot
|
||
|
|
time another timeout. In the case of the software watchdog the ability to
|
||
|
|
reboot will depend on the state of the machines and interrupts. The hardware
|
||
|
|
boards physically pull the machine down off their own onboard timers and
|
||
|
|
will reboot from almost anything.
|
||
|
|
|
||
|
|
A second temperature monitoring interface is available on the WDT501P cards
|
||
|
|
This provides /dev/temperature. This is the machine internal temperature in
|
||
|
|
degrees Fahrenheit. Each read returns a single byte giving the temperature.
|
||
|
|
|
||
|
|
The third interface logs kernel messages on additional alert events.
|
||
|
|
|
||
|
|
The wdt card cannot be safely probed for. Instead you need to pass
|
||
|
|
wdt=ioaddr,irq as a boot parameter - eg "wdt=0x240,11".
|
||
|
|
|
||
|
|
Features
|
||
|
|
--------
|
||
|
|
WDT501P WDT500P
|
||
|
|
Reboot Timer X X
|
||
|
|
External Reboot X X
|
||
|
|
I/O Port Monitor o o
|
||
|
|
Temperature X o
|
||
|
|
Fan Speed X o
|
||
|
|
Power Under X o
|
||
|
|
Power Over X o
|
||
|
|
Overheat X o
|
||
|
|
|
||
|
|
The external event interfaces on the WDT boards are not currently supported.
|
||
|
|
Minor numbers are however allocated for it.
|
||
|
|
|
||
|
|
|
||
|
|
Example Watchdog Driver: see Documentation/watchdog/src/watchdog-simple.c
|
||
|
|
|