KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
/*
|
|
|
|
* interrupt.c - handling kvm guest interrupts
|
|
|
|
*
|
|
|
|
* Copyright IBM Corp. 2008
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License (version 2 only)
|
|
|
|
* as published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* Author(s): Carsten Otte <cotte@de.ibm.com>
|
|
|
|
*/
|
|
|
|
|
2009-05-12 15:21:49 +00:00
|
|
|
#include <linux/interrupt.h>
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
#include <linux/kvm_host.h>
|
2010-02-26 21:37:43 +00:00
|
|
|
#include <linux/hrtimer.h>
|
2008-07-25 13:51:54 +00:00
|
|
|
#include <linux/signal.h>
|
2010-02-26 21:37:43 +00:00
|
|
|
#include <asm/asm-offsets.h>
|
|
|
|
#include <asm/uaccess.h>
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
#include "kvm-s390.h"
|
|
|
|
#include "gaccess.h"
|
|
|
|
|
|
|
|
static int psw_extint_disabled(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return !(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_EXT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int psw_interrupts_disabled(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
if ((vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PER) ||
|
|
|
|
(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_IO) ||
|
|
|
|
(vcpu->arch.sie_block->gpsw.mask & PSW_MASK_EXT))
|
|
|
|
return 0;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __interrupt_is_deliverable(struct kvm_vcpu *vcpu,
|
2008-06-27 13:05:40 +00:00
|
|
|
struct kvm_s390_interrupt_info *inti)
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
{
|
|
|
|
switch (inti->type) {
|
|
|
|
case KVM_S390_INT_EMERGENCY:
|
|
|
|
if (psw_extint_disabled(vcpu))
|
|
|
|
return 0;
|
|
|
|
if (vcpu->arch.sie_block->gcr[0] & 0x4000ul)
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
case KVM_S390_INT_SERVICE:
|
|
|
|
if (psw_extint_disabled(vcpu))
|
|
|
|
return 0;
|
|
|
|
if (vcpu->arch.sie_block->gcr[0] & 0x200ul)
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
case KVM_S390_INT_VIRTIO:
|
|
|
|
if (psw_extint_disabled(vcpu))
|
|
|
|
return 0;
|
|
|
|
if (vcpu->arch.sie_block->gcr[0] & 0x200ul)
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
case KVM_S390_PROGRAM_INT:
|
|
|
|
case KVM_S390_SIGP_STOP:
|
|
|
|
case KVM_S390_SIGP_SET_PREFIX:
|
|
|
|
case KVM_S390_RESTART:
|
|
|
|
return 1;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __set_cpu_idle(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
BUG_ON(vcpu->vcpu_id > KVM_MAX_VCPUS - 1);
|
|
|
|
atomic_set_mask(CPUSTAT_WAIT, &vcpu->arch.sie_block->cpuflags);
|
|
|
|
set_bit(vcpu->vcpu_id, vcpu->arch.local_int.float_int->idle_mask);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __unset_cpu_idle(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
BUG_ON(vcpu->vcpu_id > KVM_MAX_VCPUS - 1);
|
|
|
|
atomic_clear_mask(CPUSTAT_WAIT, &vcpu->arch.sie_block->cpuflags);
|
|
|
|
clear_bit(vcpu->vcpu_id, vcpu->arch.local_int.float_int->idle_mask);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __reset_intercept_indicators(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
atomic_clear_mask(CPUSTAT_ECALL_PEND |
|
|
|
|
CPUSTAT_IO_INT | CPUSTAT_EXT_INT | CPUSTAT_STOP_INT,
|
|
|
|
&vcpu->arch.sie_block->cpuflags);
|
|
|
|
vcpu->arch.sie_block->lctl = 0x0000;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __set_cpuflag(struct kvm_vcpu *vcpu, u32 flag)
|
|
|
|
{
|
|
|
|
atomic_set_mask(flag, &vcpu->arch.sie_block->cpuflags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
|
2008-06-27 13:05:40 +00:00
|
|
|
struct kvm_s390_interrupt_info *inti)
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
{
|
|
|
|
switch (inti->type) {
|
|
|
|
case KVM_S390_INT_EMERGENCY:
|
|
|
|
case KVM_S390_INT_SERVICE:
|
|
|
|
case KVM_S390_INT_VIRTIO:
|
|
|
|
if (psw_extint_disabled(vcpu))
|
|
|
|
__set_cpuflag(vcpu, CPUSTAT_EXT_INT);
|
|
|
|
else
|
|
|
|
vcpu->arch.sie_block->lctl |= LCTL_CR0;
|
|
|
|
break;
|
|
|
|
case KVM_S390_SIGP_STOP:
|
|
|
|
__set_cpuflag(vcpu, CPUSTAT_STOP_INT);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
|
2008-06-27 13:05:40 +00:00
|
|
|
struct kvm_s390_interrupt_info *inti)
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
{
|
|
|
|
const unsigned short table[] = { 2, 4, 4, 6 };
|
|
|
|
int rc, exception = 0;
|
|
|
|
|
|
|
|
switch (inti->type) {
|
|
|
|
case KVM_S390_INT_EMERGENCY:
|
|
|
|
VCPU_EVENT(vcpu, 4, "%s", "interrupt: sigp emerg");
|
|
|
|
vcpu->stat.deliver_emergency_signal++;
|
|
|
|
rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x1201);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_to_guest(vcpu, __LC_EXT_OLD_PSW,
|
|
|
|
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw,
|
|
|
|
__LC_EXT_NEW_PSW, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case KVM_S390_INT_SERVICE:
|
|
|
|
VCPU_EVENT(vcpu, 4, "interrupt: sclp parm:%x",
|
|
|
|
inti->ext.ext_params);
|
|
|
|
vcpu->stat.deliver_service_signal++;
|
|
|
|
rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x2401);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_to_guest(vcpu, __LC_EXT_OLD_PSW,
|
|
|
|
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw,
|
|
|
|
__LC_EXT_NEW_PSW, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = put_guest_u32(vcpu, __LC_EXT_PARAMS, inti->ext.ext_params);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case KVM_S390_INT_VIRTIO:
|
2009-01-09 11:14:56 +00:00
|
|
|
VCPU_EVENT(vcpu, 4, "interrupt: virtio parm:%x,parm64:%llx",
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
inti->ext.ext_params, inti->ext.ext_params2);
|
|
|
|
vcpu->stat.deliver_virtio_interrupt++;
|
|
|
|
rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x2603);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = put_guest_u16(vcpu, __LC_CPU_ADDRESS, 0x0d00);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_to_guest(vcpu, __LC_EXT_OLD_PSW,
|
|
|
|
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw,
|
|
|
|
__LC_EXT_NEW_PSW, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = put_guest_u32(vcpu, __LC_EXT_PARAMS, inti->ext.ext_params);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
2010-02-26 21:37:43 +00:00
|
|
|
rc = put_guest_u64(vcpu, __LC_EXT_PARAMS2,
|
|
|
|
inti->ext.ext_params2);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case KVM_S390_SIGP_STOP:
|
|
|
|
VCPU_EVENT(vcpu, 4, "%s", "interrupt: cpu stop");
|
|
|
|
vcpu->stat.deliver_stop_signal++;
|
|
|
|
__set_intercept_indicator(vcpu, inti);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case KVM_S390_SIGP_SET_PREFIX:
|
|
|
|
VCPU_EVENT(vcpu, 4, "interrupt: set prefix to %x",
|
|
|
|
inti->prefix.address);
|
|
|
|
vcpu->stat.deliver_prefix_signal++;
|
|
|
|
vcpu->arch.sie_block->prefix = inti->prefix.address;
|
|
|
|
vcpu->arch.sie_block->ihcpu = 0xffff;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case KVM_S390_RESTART:
|
|
|
|
VCPU_EVENT(vcpu, 4, "%s", "interrupt: cpu restart");
|
|
|
|
vcpu->stat.deliver_restart_signal++;
|
|
|
|
rc = copy_to_guest(vcpu, offsetof(struct _lowcore,
|
|
|
|
restart_old_psw), &vcpu->arch.sie_block->gpsw, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw,
|
|
|
|
offsetof(struct _lowcore, restart_psw), sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case KVM_S390_PROGRAM_INT:
|
|
|
|
VCPU_EVENT(vcpu, 4, "interrupt: pgm check code:%x, ilc:%x",
|
|
|
|
inti->pgm.code,
|
|
|
|
table[vcpu->arch.sie_block->ipa >> 14]);
|
|
|
|
vcpu->stat.deliver_program_int++;
|
|
|
|
rc = put_guest_u16(vcpu, __LC_PGM_INT_CODE, inti->pgm.code);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = put_guest_u16(vcpu, __LC_PGM_ILC,
|
|
|
|
table[vcpu->arch.sie_block->ipa >> 14]);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_to_guest(vcpu, __LC_PGM_OLD_PSW,
|
|
|
|
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
|
|
|
|
rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw,
|
|
|
|
__LC_PGM_NEW_PSW, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
if (exception) {
|
2008-07-25 13:51:54 +00:00
|
|
|
printk("kvm: The guest lowcore is not mapped during interrupt "
|
|
|
|
"delivery, killing userspace\n");
|
|
|
|
do_exit(SIGKILL);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
int rc, exception = 0;
|
|
|
|
|
|
|
|
if (psw_extint_disabled(vcpu))
|
|
|
|
return 0;
|
|
|
|
if (!(vcpu->arch.sie_block->gcr[0] & 0x800ul))
|
|
|
|
return 0;
|
|
|
|
rc = put_guest_u16(vcpu, __LC_EXT_INT_CODE, 0x1004);
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
rc = copy_to_guest(vcpu, __LC_EXT_OLD_PSW,
|
|
|
|
&vcpu->arch.sie_block->gpsw, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
rc = copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw,
|
|
|
|
__LC_EXT_NEW_PSW, sizeof(psw_t));
|
|
|
|
if (rc == -EFAULT)
|
|
|
|
exception = 1;
|
|
|
|
if (exception) {
|
2008-07-25 13:51:54 +00:00
|
|
|
printk("kvm: The guest lowcore is not mapped during interrupt "
|
|
|
|
"delivery, killing userspace\n");
|
|
|
|
do_exit(SIGKILL);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
}
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2009-07-09 12:33:52 +00:00
|
|
|
static int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
{
|
2008-06-27 13:05:40 +00:00
|
|
|
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
|
|
|
|
struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
|
|
|
|
struct kvm_s390_interrupt_info *inti;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
if (atomic_read(&li->active)) {
|
|
|
|
spin_lock_bh(&li->lock);
|
|
|
|
list_for_each_entry(inti, &li->list, list)
|
|
|
|
if (__interrupt_is_deliverable(vcpu, inti)) {
|
|
|
|
rc = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
spin_unlock_bh(&li->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((!rc) && atomic_read(&fi->active)) {
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_lock(&fi->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
list_for_each_entry(inti, &fi->list, list)
|
|
|
|
if (__interrupt_is_deliverable(vcpu, inti)) {
|
|
|
|
rc = 1;
|
|
|
|
break;
|
|
|
|
}
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_unlock(&fi->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if ((!rc) && (vcpu->arch.sie_block->ckc <
|
|
|
|
get_clock() + vcpu->arch.sie_block->epoch)) {
|
|
|
|
if ((!psw_extint_disabled(vcpu)) &&
|
|
|
|
(vcpu->arch.sie_block->gcr[0] & 0x800ul))
|
|
|
|
rc = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2008-04-11 17:53:26 +00:00
|
|
|
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
int kvm_s390_handle_wait(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
|
|
|
u64 now, sltime;
|
|
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
|
|
|
|
vcpu->stat.exit_wait_state++;
|
|
|
|
if (kvm_cpu_has_interrupt(vcpu))
|
|
|
|
return 0;
|
|
|
|
|
2008-05-21 11:37:44 +00:00
|
|
|
__set_cpu_idle(vcpu);
|
|
|
|
spin_lock_bh(&vcpu->arch.local_int.lock);
|
|
|
|
vcpu->arch.local_int.timer_due = 0;
|
|
|
|
spin_unlock_bh(&vcpu->arch.local_int.lock);
|
|
|
|
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
if (psw_interrupts_disabled(vcpu)) {
|
|
|
|
VCPU_EVENT(vcpu, 3, "%s", "disabled wait");
|
|
|
|
__unset_cpu_idle(vcpu);
|
2010-02-26 21:37:41 +00:00
|
|
|
return -EOPNOTSUPP; /* disabled wait */
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (psw_extint_disabled(vcpu) ||
|
|
|
|
(!(vcpu->arch.sie_block->gcr[0] & 0x800ul))) {
|
|
|
|
VCPU_EVENT(vcpu, 3, "%s", "enabled wait w/o timer");
|
|
|
|
goto no_timer;
|
|
|
|
}
|
|
|
|
|
|
|
|
now = get_clock() + vcpu->arch.sie_block->epoch;
|
|
|
|
if (vcpu->arch.sie_block->ckc < now) {
|
|
|
|
__unset_cpu_idle(vcpu);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-05-12 15:21:49 +00:00
|
|
|
sltime = ((vcpu->arch.sie_block->ckc - now)*125)>>9;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
|
2009-05-12 15:21:49 +00:00
|
|
|
hrtimer_start(&vcpu->arch.ckc_timer, ktime_set (0, sltime) , HRTIMER_MODE_REL);
|
|
|
|
VCPU_EVENT(vcpu, 5, "enabled wait via clock comparator: %llx ns", sltime);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
no_timer:
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_lock(&vcpu->arch.local_int.float_int->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
spin_lock_bh(&vcpu->arch.local_int.lock);
|
|
|
|
add_wait_queue(&vcpu->arch.local_int.wq, &wait);
|
|
|
|
while (list_empty(&vcpu->arch.local_int.list) &&
|
|
|
|
list_empty(&vcpu->arch.local_int.float_int->list) &&
|
|
|
|
(!vcpu->arch.local_int.timer_due) &&
|
|
|
|
!signal_pending(current)) {
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
|
|
spin_unlock_bh(&vcpu->arch.local_int.lock);
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_unlock(&vcpu->arch.local_int.float_int->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
vcpu_put(vcpu);
|
|
|
|
schedule();
|
|
|
|
vcpu_load(vcpu);
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_lock(&vcpu->arch.local_int.float_int->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
spin_lock_bh(&vcpu->arch.local_int.lock);
|
|
|
|
}
|
|
|
|
__unset_cpu_idle(vcpu);
|
|
|
|
__set_current_state(TASK_RUNNING);
|
2009-07-16 15:17:37 +00:00
|
|
|
remove_wait_queue(&vcpu->arch.local_int.wq, &wait);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
spin_unlock_bh(&vcpu->arch.local_int.lock);
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_unlock(&vcpu->arch.local_int.float_int->lock);
|
2009-05-12 15:21:49 +00:00
|
|
|
hrtimer_try_to_cancel(&vcpu->arch.ckc_timer);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-05-12 15:21:49 +00:00
|
|
|
void kvm_s390_tasklet(unsigned long parm)
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
{
|
2009-05-12 15:21:49 +00:00
|
|
|
struct kvm_vcpu *vcpu = (struct kvm_vcpu *) parm;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
|
2009-05-12 15:21:49 +00:00
|
|
|
spin_lock(&vcpu->arch.local_int.lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
vcpu->arch.local_int.timer_due = 1;
|
|
|
|
if (waitqueue_active(&vcpu->arch.local_int.wq))
|
|
|
|
wake_up_interruptible(&vcpu->arch.local_int.wq);
|
2009-05-12 15:21:49 +00:00
|
|
|
spin_unlock(&vcpu->arch.local_int.lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
}
|
|
|
|
|
2009-05-12 15:21:49 +00:00
|
|
|
/*
|
|
|
|
* low level hrtimer wake routine. Because this runs in hardirq context
|
|
|
|
* we schedule a tasklet to do the real work.
|
|
|
|
*/
|
|
|
|
enum hrtimer_restart kvm_s390_idle_wakeup(struct hrtimer *timer)
|
|
|
|
{
|
|
|
|
struct kvm_vcpu *vcpu;
|
|
|
|
|
|
|
|
vcpu = container_of(timer, struct kvm_vcpu, arch.ckc_timer);
|
|
|
|
tasklet_schedule(&vcpu->arch.tasklet);
|
|
|
|
|
|
|
|
return HRTIMER_NORESTART;
|
|
|
|
}
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
|
|
|
|
void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
|
|
|
|
{
|
2008-06-27 13:05:40 +00:00
|
|
|
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
|
|
|
|
struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
|
|
|
|
struct kvm_s390_interrupt_info *n, *inti = NULL;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
int deliver;
|
|
|
|
|
|
|
|
__reset_intercept_indicators(vcpu);
|
|
|
|
if (atomic_read(&li->active)) {
|
|
|
|
do {
|
|
|
|
deliver = 0;
|
|
|
|
spin_lock_bh(&li->lock);
|
|
|
|
list_for_each_entry_safe(inti, n, &li->list, list) {
|
|
|
|
if (__interrupt_is_deliverable(vcpu, inti)) {
|
|
|
|
list_del(&inti->list);
|
|
|
|
deliver = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
__set_intercept_indicator(vcpu, inti);
|
|
|
|
}
|
|
|
|
if (list_empty(&li->list))
|
|
|
|
atomic_set(&li->active, 0);
|
|
|
|
spin_unlock_bh(&li->lock);
|
|
|
|
if (deliver) {
|
|
|
|
__do_deliver_interrupt(vcpu, inti);
|
|
|
|
kfree(inti);
|
|
|
|
}
|
|
|
|
} while (deliver);
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((vcpu->arch.sie_block->ckc <
|
|
|
|
get_clock() + vcpu->arch.sie_block->epoch))
|
|
|
|
__try_deliver_ckc_interrupt(vcpu);
|
|
|
|
|
|
|
|
if (atomic_read(&fi->active)) {
|
|
|
|
do {
|
|
|
|
deliver = 0;
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_lock(&fi->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
list_for_each_entry_safe(inti, n, &fi->list, list) {
|
|
|
|
if (__interrupt_is_deliverable(vcpu, inti)) {
|
|
|
|
list_del(&inti->list);
|
|
|
|
deliver = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
__set_intercept_indicator(vcpu, inti);
|
|
|
|
}
|
|
|
|
if (list_empty(&fi->list))
|
|
|
|
atomic_set(&fi->active, 0);
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_unlock(&fi->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
if (deliver) {
|
|
|
|
__do_deliver_interrupt(vcpu, inti);
|
|
|
|
kfree(inti);
|
|
|
|
}
|
|
|
|
} while (deliver);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
|
|
|
|
{
|
2008-06-27 13:05:40 +00:00
|
|
|
struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
|
|
|
|
struct kvm_s390_interrupt_info *inti;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
|
|
|
|
inti = kzalloc(sizeof(*inti), GFP_KERNEL);
|
|
|
|
if (!inti)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2009-08-18 18:18:35 +00:00
|
|
|
inti->type = KVM_S390_PROGRAM_INT;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
inti->pgm.code = code;
|
|
|
|
|
|
|
|
VCPU_EVENT(vcpu, 3, "inject: program check %d (from kernel)", code);
|
|
|
|
spin_lock_bh(&li->lock);
|
|
|
|
list_add(&inti->list, &li->list);
|
|
|
|
atomic_set(&li->active, 1);
|
|
|
|
BUG_ON(waitqueue_active(&li->wq));
|
|
|
|
spin_unlock_bh(&li->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int kvm_s390_inject_vm(struct kvm *kvm,
|
|
|
|
struct kvm_s390_interrupt *s390int)
|
|
|
|
{
|
2008-06-27 13:05:40 +00:00
|
|
|
struct kvm_s390_local_interrupt *li;
|
|
|
|
struct kvm_s390_float_interrupt *fi;
|
|
|
|
struct kvm_s390_interrupt_info *inti;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
int sigcpu;
|
|
|
|
|
|
|
|
inti = kzalloc(sizeof(*inti), GFP_KERNEL);
|
|
|
|
if (!inti)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
switch (s390int->type) {
|
|
|
|
case KVM_S390_INT_VIRTIO:
|
2009-01-09 11:14:56 +00:00
|
|
|
VM_EVENT(kvm, 5, "inject: virtio parm:%x,parm64:%llx",
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
s390int->parm, s390int->parm64);
|
|
|
|
inti->type = s390int->type;
|
|
|
|
inti->ext.ext_params = s390int->parm;
|
|
|
|
inti->ext.ext_params2 = s390int->parm64;
|
|
|
|
break;
|
|
|
|
case KVM_S390_INT_SERVICE:
|
|
|
|
VM_EVENT(kvm, 5, "inject: sclp parm:%x", s390int->parm);
|
|
|
|
inti->type = s390int->type;
|
|
|
|
inti->ext.ext_params = s390int->parm;
|
|
|
|
break;
|
|
|
|
case KVM_S390_PROGRAM_INT:
|
|
|
|
case KVM_S390_SIGP_STOP:
|
|
|
|
case KVM_S390_INT_EMERGENCY:
|
|
|
|
default:
|
|
|
|
kfree(inti);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_lock(&kvm->lock);
|
|
|
|
fi = &kvm->arch.float_int;
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_lock(&fi->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
list_add_tail(&inti->list, &fi->list);
|
|
|
|
atomic_set(&fi->active, 1);
|
|
|
|
sigcpu = find_first_bit(fi->idle_mask, KVM_MAX_VCPUS);
|
|
|
|
if (sigcpu == KVM_MAX_VCPUS) {
|
|
|
|
do {
|
|
|
|
sigcpu = fi->next_rr_cpu++;
|
|
|
|
if (sigcpu == KVM_MAX_VCPUS)
|
|
|
|
sigcpu = fi->next_rr_cpu = 0;
|
|
|
|
} while (fi->local_int[sigcpu] == NULL);
|
|
|
|
}
|
|
|
|
li = fi->local_int[sigcpu];
|
|
|
|
spin_lock_bh(&li->lock);
|
|
|
|
atomic_set_mask(CPUSTAT_EXT_INT, li->cpuflags);
|
|
|
|
if (waitqueue_active(&li->wq))
|
|
|
|
wake_up_interruptible(&li->wq);
|
|
|
|
spin_unlock_bh(&li->lock);
|
2009-05-12 15:21:50 +00:00
|
|
|
spin_unlock(&fi->lock);
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
mutex_unlock(&kvm->lock);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
|
|
|
|
struct kvm_s390_interrupt *s390int)
|
|
|
|
{
|
2008-06-27 13:05:40 +00:00
|
|
|
struct kvm_s390_local_interrupt *li;
|
|
|
|
struct kvm_s390_interrupt_info *inti;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
|
|
|
|
inti = kzalloc(sizeof(*inti), GFP_KERNEL);
|
|
|
|
if (!inti)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
switch (s390int->type) {
|
|
|
|
case KVM_S390_PROGRAM_INT:
|
|
|
|
if (s390int->parm & 0xffff0000) {
|
|
|
|
kfree(inti);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
inti->type = s390int->type;
|
|
|
|
inti->pgm.code = s390int->parm;
|
|
|
|
VCPU_EVENT(vcpu, 3, "inject: program check %d (from user)",
|
|
|
|
s390int->parm);
|
|
|
|
break;
|
2009-01-22 09:29:08 +00:00
|
|
|
case KVM_S390_SIGP_SET_PREFIX:
|
|
|
|
inti->prefix.address = s390int->parm;
|
|
|
|
inti->type = s390int->type;
|
|
|
|
VCPU_EVENT(vcpu, 3, "inject: set prefix to %x (from user)",
|
|
|
|
s390int->parm);
|
|
|
|
break;
|
KVM: s390: interrupt subsystem, cpu timer, waitpsw
This patch contains the s390 interrupt subsystem (similar to in kernel apic)
including timer interrupts (similar to in-kernel-pit) and enabled wait
(similar to in kernel hlt).
In order to achieve that, this patch also introduces intercept handling
for instruction intercepts, and it implements load control instructions.
This patch introduces an ioctl KVM_S390_INTERRUPT which is valid for both
the vm file descriptors and the vcpu file descriptors. In case this ioctl is
issued against a vm file descriptor, the interrupt is considered floating.
Floating interrupts may be delivered to any virtual cpu in the configuration.
The following interrupts are supported:
SIGP STOP - interprocessor signal that stops a remote cpu
SIGP SET PREFIX - interprocessor signal that sets the prefix register of a
(stopped) remote cpu
INT EMERGENCY - interprocessor interrupt, usually used to signal need_reshed
and for smp_call_function() in the guest.
PROGRAM INT - exception during program execution such as page fault, illegal
instruction and friends
RESTART - interprocessor signal that starts a stopped cpu
INT VIRTIO - floating interrupt for virtio signalisation
INT SERVICE - floating interrupt for signalisations from the system
service processor
struct kvm_s390_interrupt, which is submitted as ioctl parameter when injecting
an interrupt, also carrys parameter data for interrupts along with the interrupt
type. Interrupts on s390 usually have a state that represents the current
operation, or identifies which device has caused the interruption on s390.
kvm_s390_handle_wait() does handle waitpsw in two flavors: in case of a
disabled wait (that is, disabled for interrupts), we exit to userspace. In case
of an enabled wait we set up a timer that equals the cpu clock comparator value
and sleep on a wait queue.
[christian: change virtio interrupt to 0x2603]
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-03-25 17:47:26 +00:00
|
|
|
case KVM_S390_SIGP_STOP:
|
|
|
|
case KVM_S390_RESTART:
|
|
|
|
case KVM_S390_INT_EMERGENCY:
|
|
|
|
VCPU_EVENT(vcpu, 3, "inject: type %x", s390int->type);
|
|
|
|
inti->type = s390int->type;
|
|
|
|
break;
|
|
|
|
case KVM_S390_INT_VIRTIO:
|
|
|
|
case KVM_S390_INT_SERVICE:
|
|
|
|
default:
|
|
|
|
kfree(inti);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
mutex_lock(&vcpu->kvm->lock);
|
|
|
|
li = &vcpu->arch.local_int;
|
|
|
|
spin_lock_bh(&li->lock);
|
|
|
|
if (inti->type == KVM_S390_PROGRAM_INT)
|
|
|
|
list_add(&inti->list, &li->list);
|
|
|
|
else
|
|
|
|
list_add_tail(&inti->list, &li->list);
|
|
|
|
atomic_set(&li->active, 1);
|
|
|
|
if (inti->type == KVM_S390_SIGP_STOP)
|
|
|
|
li->action_bits |= ACTION_STOP_ON_STOP;
|
|
|
|
atomic_set_mask(CPUSTAT_EXT_INT, li->cpuflags);
|
|
|
|
if (waitqueue_active(&li->wq))
|
|
|
|
wake_up_interruptible(&vcpu->arch.local_int.wq);
|
|
|
|
spin_unlock_bh(&li->lock);
|
|
|
|
mutex_unlock(&vcpu->kvm->lock);
|
|
|
|
return 0;
|
|
|
|
}
|