FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-13 20:33:15 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

pwm: pwm-tiehrpwm: Fix conflicting channel period setting

Browse Source 
EHRPWM hardware supports 2 independent PWM channels. However the device
uses only one register to handle period setting for both channels. So
both channels should be configured for same period (in nsec).

Fix the same by returning error for conflicting period values.

However, allow
1. Configuration of period settings if not conflicting with other
channels
2. Re-configuring of period settings if no other channels being
configured

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
This commit is contained in:
Philip, Avinash 2012-09-06 10:44:25 +05:30 committed by Thierry Reding
parent c06fad9d28
commit 01b2d4536f
1 changed files with 29 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
drivers/pwm/pwm-tiehrpwm.c
View File

@ -104,6 +104,7 @@ struct ehrpwm_pwm_chip {
struct pwm_chip chip;
unsigned int clk_rate;
void __iomem *mmio_base;
unsigned long period_cycles[NUM_PWM_CHANNEL];
};
static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
@ -210,6 +211,7 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned long long c;
unsigned long period_cycles, duty_cycles;
unsigned short ps_divval, tb_divval;
int i;
if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
return -ERANGE;
@ -229,6 +231,28 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
duty_cycles = (unsigned long)c;
}
/*
* Period values should be same for multiple PWM channels as IP uses
* same period register for multiple channels.
*/
for (i = 0; i < NUM_PWM_CHANNEL; i++) {
if (pc->period_cycles[i] &&
(pc->period_cycles[i] != period_cycles)) {
/*
* Allow channel to reconfigure period if no other
* channels being configured.
*/
if (i == pwm->hwpwm)
continue;
dev_err(chip->dev, "Period value conflicts with channel %d\n",
i);
return -EINVAL;
}
}
pc->period_cycles[pwm->hwpwm] = period_cycles;
/* Configure clock prescaler to support Low frequency PWM wave */
if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
&tb_divval)) {
@ -320,10 +344,15 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
/* set period value to zero on free */
pc->period_cycles[pwm->hwpwm] = 0;
}
static const struct pwm_ops ehrpwm_pwm_ops = {