From 6da3aba6f056b861c9f54ef104425ceb5e9389ad Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Wed, 13 Apr 2016 07:55:37 +0800 Subject: [PATCH 01/19] arm64: dts: Reserve memory regions for hi6220 On Hi6220, below memory regions in DDR have specific purpose: 0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime; 0x06df,f000 - 0x06df,ffff: For mailbox message data; 0x0740,f000 - 0x0740,ffff: For MCU firmware's section; 0x3e00,0000 - 0x3fff,ffff: For OP-TEE. This patch reserves these memory regions in DT. Signed-off-by: Leo Yan Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 818525197508..17bd7932260f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -7,9 +7,6 @@ /dts-v1/; -/*Reserved 1MB memory for MCU*/ -/memreserve/ 0x05e00000 0x00100000; - #include "hi6220.dtsi" / { @@ -27,9 +24,20 @@ stdout-path = "serial3:115200n8"; }; + /* + * Reserve below regions from memory node: + * + * 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using + * 0x06df,f000 - 0x06df,ffff: Mailbox message data + * 0x0740,f000 - 0x0740,ffff: MCU firmware section + * 0x3e00,0000 - 0x3fff,ffff: OP-TEE + */ memory@0 { device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; + reg = <0x00000000 0x00000000 0x00000000 0x05e00000>, + <0x00000000 0x05f00000 0x00000000 0x00eff000>, + <0x00000000 0x06e00000 0x00000000 0x0060f000>, + <0x00000000 0x07410000 0x00000000 0x36bf0000>; }; }; From 9e92703165d982b3df35e551c4d15a93ab9fba3d Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Wed, 13 Apr 2016 07:55:38 +0800 Subject: [PATCH 02/19] arm64: dts: add sp804 timer node for Hi6220 Add sp804 timer for hi6220, so it can be used as broadcast timer. Signed-off-by: Leo Yan Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index ad1f1ebcb05c..b975286195ce 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -209,5 +209,16 @@ clock-names = "uartclk", "apb_pclk"; status = "disabled"; }; + + dual_timer0: timer@f8008000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x0 0xf8008000 0x0 0x1000>; + interrupts = , + ; + clocks = <&ao_ctrl HI6220_TIMER0_PCLK>, + <&ao_ctrl HI6220_TIMER0_PCLK>, + <&ao_ctrl HI6220_TIMER0_PCLK>; + clock-names = "timer1", "timer2", "apb_pclk"; + }; }; }; From 58fa29bfbe5e908e0f5d2627c5f15001696b1666 Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Wed, 13 Apr 2016 07:55:39 +0800 Subject: [PATCH 03/19] arm64: dts: enable idle states for Hi6220 Add cpu and cluster level's low power state for Hi6220. Acked-by: Sudeep Holla Signed-off-by: Leo Yan Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 31 +++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index b975286195ce..dc7f21a1eed4 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -53,11 +53,35 @@ }; }; + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <700>; + exit-latency-us = <250>; + min-residency-us = <1000>; + }; + + CLUSTER_SLEEP: cluster-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x1010000>; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + wakeup-latency-us = <1500>; + }; + }; + cpu0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu1: cpu@1 { @@ -65,6 +89,7 @@ device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu2: cpu@2 { @@ -72,6 +97,7 @@ device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu3: cpu@3 { @@ -79,6 +105,7 @@ device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu4: cpu@100 { @@ -86,6 +113,7 @@ device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu5: cpu@101 { @@ -93,6 +121,7 @@ device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu6: cpu@102 { @@ -100,6 +129,7 @@ device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; cpu7: cpu@103 { @@ -107,6 +137,7 @@ device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; }; From f2bfacf9ddcff49103c08ee7e83bf3fffe6e37ba Mon Sep 17 00:00:00 2001 From: Zhong Kaihua Date: Wed, 13 Apr 2016 07:55:40 +0800 Subject: [PATCH 04/19] arm64: dts: Add Hi6220 gpio configuration nodes Add Hi6220 gpio configuration nodes Signed-off-by: Zhong Kaihua Signed-off-by: Kong Xinwei Signed-off-by: Guodong Xu Reviewed-by: Linus Walleij Acked-by: Rob Herring Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 239 ++++++++++++++++++++++ 1 file changed, 239 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index dc7f21a1eed4..493bbb032ae0 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -251,5 +251,244 @@ <&ao_ctrl HI6220_TIMER0_PCLK>; clock-names = "timer1", "timer2", "apb_pclk"; }; + + gpio0: gpio@f8011000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8011000 0x0 0x1000>; + interrupts = <0 52 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@f8012000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8012000 0x0 0x1000>; + interrupts = <0 53 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@f8013000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8013000 0x0 0x1000>; + interrupts = <0 54 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@f8014000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf8014000 0x0 0x1000>; + interrupts = <0 55 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@f7020000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7020000 0x0 0x1000>; + interrupts = <0 56 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@f7021000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7021000 0x0 0x1000>; + interrupts = <0 57 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@f7022000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7022000 0x0 0x1000>; + interrupts = <0 58 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@f7023000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7023000 0x0 0x1000>; + interrupts = <0 59 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@f7024000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7024000 0x0 0x1000>; + interrupts = <0 60 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@f7025000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7025000 0x0 0x1000>; + interrupts = <0 61 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@f7026000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7026000 0x0 0x1000>; + interrupts = <0 62 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@f7027000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7027000 0x0 0x1000>; + interrupts = <0 63 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@f7028000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7028000 0x0 0x1000>; + interrupts = <0 64 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@f7029000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf7029000 0x0 0x1000>; + interrupts = <0 65 0x4>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@f702a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702a000 0x0 0x1000>; + interrupts = <0 66 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@f702b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702b000 0x0 0x1000>; + interrupts = <0 67 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@f702c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702c000 0x0 0x1000>; + interrupts = <0 68 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@f702d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702d000 0x0 0x1000>; + interrupts = <0 69 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@f702e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702e000 0x0 0x1000>; + interrupts = <0 70 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@f702f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x0 0xf702f000 0x0 0x1000>; + interrupts = <0 71 0x4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&ao_ctrl 2>; + clock-names = "apb_pclk"; + }; }; }; From 379e9bf52daaaa841ecc4eed3f2c5c86845c45a9 Mon Sep 17 00:00:00 2001 From: Zhong Kaihua Date: Wed, 13 Apr 2016 07:55:41 +0800 Subject: [PATCH 05/19] arm64: dts: add Hi6220 pinctrl configuration nodes Add Hi6220 pinctrl configuration nodes Signed-off-by: Zhong Kaihua Acked-by: Linus Walleij Acked-by: Haojian Zhuang Acked-by: Tony Lindgren Signed-off-by: Wei Xu --- .../arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 + arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 77 ++ .../boot/dts/hisilicon/hikey-pinctrl.dtsi | 684 ++++++++++++++++++ include/dt-bindings/pinctrl/hisi.h | 59 ++ 4 files changed, 821 insertions(+) create mode 100644 arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi create mode 100644 include/dt-bindings/pinctrl/hisi.h diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 17bd7932260f..3d9e8b2d2b18 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "hi6220.dtsi" +#include "hikey-pinctrl.dtsi" / { model = "HiKey Development Board"; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 493bbb032ae0..df56571703b0 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -6,6 +6,7 @@ #include #include +#include / { compatible = "hisilicon,hi6220"; @@ -252,6 +253,60 @@ clock-names = "timer1", "timer2", "apb_pclk"; }; + pmx0: pinmux@f7010000 { + compatible = "pinctrl-single"; + reg = <0x0 0xf7010000 0x0 0x27c>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + pinctrl-single,gpio-range = < + &range 80 8 MUX_M0 /* gpio 3: [0..7] */ + &range 88 8 MUX_M0 /* gpio 4: [0..7] */ + &range 96 8 MUX_M0 /* gpio 5: [0..7] */ + &range 104 8 MUX_M0 /* gpio 6: [0..7] */ + &range 112 8 MUX_M0 /* gpio 7: [0..7] */ + &range 120 2 MUX_M0 /* gpio 8: [0..1] */ + &range 2 6 MUX_M1 /* gpio 8: [2..7] */ + &range 8 8 MUX_M1 /* gpio 9: [0..7] */ + &range 0 1 MUX_M1 /* gpio 10: [0] */ + &range 16 7 MUX_M1 /* gpio 10: [1..7] */ + &range 23 3 MUX_M1 /* gpio 11: [0..2] */ + &range 28 5 MUX_M1 /* gpio 11: [3..7] */ + &range 33 3 MUX_M1 /* gpio 12: [0..2] */ + &range 43 5 MUX_M1 /* gpio 12: [3..7] */ + &range 48 8 MUX_M1 /* gpio 13: [0..7] */ + &range 56 8 MUX_M1 /* gpio 14: [0..7] */ + &range 74 6 MUX_M1 /* gpio 15: [0..5] */ + &range 122 1 MUX_M1 /* gpio 15: [6] */ + &range 126 1 MUX_M1 /* gpio 15: [7] */ + &range 127 8 MUX_M1 /* gpio 16: [0..7] */ + &range 135 8 MUX_M1 /* gpio 17: [0..7] */ + &range 143 8 MUX_M1 /* gpio 18: [0..7] */ + &range 151 8 MUX_M1 /* gpio 19: [0..7] */ + >; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + pmx1: pinmux@f7010800 { + compatible = "pinconf-single"; + reg = <0x0 0xf7010800 0x0 0x28c>; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-single,register-width = <32>; + }; + + pmx2: pinmux@f8001800 { + compatible = "pinconf-single"; + reg = <0x0 0xf8001800 0x0 0x78>; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-single,register-width = <32>; + }; + gpio0: gpio@f8011000 { compatible = "arm,pl061", "arm,primecell"; reg = <0x0 0xf8011000 0x0 0x1000>; @@ -294,6 +349,7 @@ interrupts = <0 55 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 80 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -306,6 +362,7 @@ interrupts = <0 56 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 88 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -318,6 +375,7 @@ interrupts = <0 57 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 96 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -330,6 +388,7 @@ interrupts = <0 58 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 104 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -342,6 +401,7 @@ interrupts = <0 59 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 112 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -354,6 +414,7 @@ interrupts = <0 60 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 120 2 &pmx0 2 2 6>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -366,6 +427,7 @@ interrupts = <0 61 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 8 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -378,6 +440,7 @@ interrupts = <0 62 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 0 1 &pmx0 1 16 7>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -390,6 +453,7 @@ interrupts = <0 63 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 23 3 &pmx0 3 28 5>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -402,6 +466,7 @@ interrupts = <0 64 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 33 3 &pmx0 3 43 5>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -413,6 +478,8 @@ reg = <0x0 0xf7029000 0x0 0x1000>; interrupts = <0 65 0x4>; gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 48 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -425,6 +492,7 @@ interrupts = <0 66 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 56 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -437,6 +505,11 @@ interrupts = <0 67 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = < + &pmx0 0 74 6 + &pmx0 6 122 1 + &pmx0 7 126 1 + >; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -449,6 +522,7 @@ interrupts = <0 68 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 127 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -461,6 +535,7 @@ interrupts = <0 69 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 135 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -473,6 +548,7 @@ interrupts = <0 70 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 143 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; @@ -485,6 +561,7 @@ interrupts = <0 71 0x4>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pmx0 0 151 8>; interrupt-controller; #interrupt-cells = <2>; clocks = <&ao_ctrl 2>; diff --git a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi new file mode 100644 index 000000000000..28806df214d7 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi @@ -0,0 +1,684 @@ +/* + * pinctrl dts fils for Hislicon HiKey development board + * + */ +#include + +/ { + soc { + pmx0: pinmux@f7010000 { + pinctrl-names = "default"; + pinctrl-0 = < + &boot_sel_pmx_func + &hkadc_ssi_pmx_func + &codec_clk_pmx_func + &pwm_in_pmx_func + &bl_pwm_pmx_func + >; + + boot_sel_pmx_func: boot_sel_pmx_func { + pinctrl-single,pins = < + 0x0 MUX_M0 /* BOOT_SEL (IOMG000) */ + >; + }; + + emmc_pmx_func: emmc_pmx_func { + pinctrl-single,pins = < + 0x100 MUX_M0 /* EMMC_CLK (IOMG064) */ + 0x104 MUX_M0 /* EMMC_CMD (IOMG065) */ + 0x108 MUX_M0 /* EMMC_DATA0 (IOMG066) */ + 0x10c MUX_M0 /* EMMC_DATA1 (IOMG067) */ + 0x110 MUX_M0 /* EMMC_DATA2 (IOMG068) */ + 0x114 MUX_M0 /* EMMC_DATA3 (IOMG069) */ + 0x118 MUX_M0 /* EMMC_DATA4 (IOMG070) */ + 0x11c MUX_M0 /* EMMC_DATA5 (IOMG071) */ + 0x120 MUX_M0 /* EMMC_DATA6 (IOMG072) */ + 0x124 MUX_M0 /* EMMC_DATA7 (IOMG073) */ + >; + }; + + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0xc MUX_M0 /* SD_CLK (IOMG003) */ + 0x10 MUX_M0 /* SD_CMD (IOMG004) */ + 0x14 MUX_M0 /* SD_DATA0 (IOMG005) */ + 0x18 MUX_M0 /* SD_DATA1 (IOMG006) */ + 0x1c MUX_M0 /* SD_DATA2 (IOMG007) */ + 0x20 MUX_M0 /* SD_DATA3 (IOMG008) */ + >; + }; + sd_pmx_idle: sd_pmx_idle { + pinctrl-single,pins = < + 0xc MUX_M1 /* SD_CLK (IOMG003) */ + 0x10 MUX_M1 /* SD_CMD (IOMG004) */ + 0x14 MUX_M1 /* SD_DATA0 (IOMG005) */ + 0x18 MUX_M1 /* SD_DATA1 (IOMG006) */ + 0x1c MUX_M1 /* SD_DATA2 (IOMG007) */ + 0x20 MUX_M1 /* SD_DATA3 (IOMG008) */ + >; + }; + + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x128 MUX_M0 /* SDIO_CLK (IOMG074) */ + 0x12c MUX_M0 /* SDIO_CMD (IOMG075) */ + 0x130 MUX_M0 /* SDIO_DATA0 (IOMG076) */ + 0x134 MUX_M0 /* SDIO_DATA1 (IOMG077) */ + 0x138 MUX_M0 /* SDIO_DATA2 (IOMG078) */ + 0x13c MUX_M0 /* SDIO_DATA3 (IOMG079) */ + >; + }; + sdio_pmx_idle: sdio_pmx_idle { + pinctrl-single,pins = < + 0x128 MUX_M1 /* SDIO_CLK (IOMG074) */ + 0x12c MUX_M1 /* SDIO_CMD (IOMG075) */ + 0x130 MUX_M1 /* SDIO_DATA0 (IOMG076) */ + 0x134 MUX_M1 /* SDIO_DATA1 (IOMG077) */ + 0x138 MUX_M1 /* SDIO_DATA2 (IOMG078) */ + 0x13c MUX_M1 /* SDIO_DATA3 (IOMG079) */ + >; + }; + + isp_pmx_func: isp_pmx_func { + pinctrl-single,pins = < + 0x24 MUX_M0 /* ISP_PWDN0 (IOMG009) */ + 0x28 MUX_M0 /* ISP_PWDN1 (IOMG010) */ + 0x2c MUX_M0 /* ISP_PWDN2 (IOMG011) */ + 0x30 MUX_M1 /* ISP_SHUTTER0 (IOMG012) */ + 0x34 MUX_M1 /* ISP_SHUTTER1 (IOMG013) */ + 0x38 MUX_M1 /* ISP_PWM (IOMG014) */ + 0x3c MUX_M0 /* ISP_CCLK0 (IOMG015) */ + 0x40 MUX_M0 /* ISP_CCLK1 (IOMG016) */ + 0x44 MUX_M0 /* ISP_RESETB0 (IOMG017) */ + 0x48 MUX_M0 /* ISP_RESETB1 (IOMG018) */ + 0x4c MUX_M1 /* ISP_STROBE0 (IOMG019) */ + 0x50 MUX_M1 /* ISP_STROBE1 (IOMG020) */ + 0x54 MUX_M0 /* ISP_SDA0 (IOMG021) */ + 0x58 MUX_M0 /* ISP_SCL0 (IOMG022) */ + 0x5c MUX_M0 /* ISP_SDA1 (IOMG023) */ + 0x60 MUX_M0 /* ISP_SCL1 (IOMG024) */ + >; + }; + + hkadc_ssi_pmx_func: hkadc_ssi_pmx_func { + pinctrl-single,pins = < + 0x68 MUX_M0 /* HKADC_SSI (IOMG026) */ + >; + }; + + codec_clk_pmx_func: codec_clk_pmx_func { + pinctrl-single,pins = < + 0x6c MUX_M0 /* CODEC_CLK (IOMG027) */ + >; + }; + + codec_pmx_func: codec_pmx_func { + pinctrl-single,pins = < + 0x70 MUX_M1 /* DMIC_CLK (IOMG028) */ + 0x74 MUX_M0 /* CODEC_SYNC (IOMG029) */ + 0x78 MUX_M0 /* CODEC_DI (IOMG030) */ + 0x7c MUX_M0 /* CODEC_DO (IOMG031) */ + >; + }; + + fm_pmx_func: fm_pmx_func { + pinctrl-single,pins = < + 0x80 MUX_M1 /* FM_XCLK (IOMG032) */ + 0x84 MUX_M1 /* FM_XFS (IOMG033) */ + 0x88 MUX_M1 /* FM_DI (IOMG034) */ + 0x8c MUX_M1 /* FM_DO (IOMG035) */ + >; + }; + + bt_pmx_func: bt_pmx_func { + pinctrl-single,pins = < + 0x90 MUX_M0 /* BT_XCLK (IOMG036) */ + 0x94 MUX_M0 /* BT_XFS (IOMG037) */ + 0x98 MUX_M0 /* BT_DI (IOMG038) */ + 0x9c MUX_M0 /* BT_DO (IOMG039) */ + >; + }; + + pwm_in_pmx_func: pwm_in_pmx_func { + pinctrl-single,pins = < + 0xb8 MUX_M1 /* PWM_IN (IOMG046) */ + >; + }; + + bl_pwm_pmx_func: bl_pwm_pmx_func { + pinctrl-single,pins = < + 0xbc MUX_M1 /* BL_PWM (IOMG047) */ + >; + }; + + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0xc0 MUX_M0 /* UART0_RXD (IOMG048) */ + 0xc4 MUX_M0 /* UART0_TXD (IOMG049) */ + >; + }; + + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0xc8 MUX_M0 /* UART1_CTS_N (IOMG050) */ + 0xcc MUX_M0 /* UART1_RTS_N (IOMG051) */ + 0xd0 MUX_M0 /* UART1_RXD (IOMG052) */ + 0xd4 MUX_M0 /* UART1_TXD (IOMG053) */ + >; + }; + + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0xd8 MUX_M0 /* UART2_CTS_N (IOMG054) */ + 0xdc MUX_M0 /* UART2_RTS_N (IOMG055) */ + 0xe0 MUX_M0 /* UART2_RXD (IOMG056) */ + 0xe4 MUX_M0 /* UART2_TXD (IOMG057) */ + >; + }; + + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x180 MUX_M1 /* UART3_CTS_N (IOMG096) */ + 0x184 MUX_M1 /* UART3_RTS_N (IOMG097) */ + 0x188 MUX_M1 /* UART3_RXD (IOMG098) */ + 0x18c MUX_M1 /* UART3_TXD (IOMG099) */ + >; + }; + + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x1d0 MUX_M1 /* UART4_CTS_N (IOMG116) */ + 0x1d4 MUX_M1 /* UART4_RTS_N (IOMG117) */ + 0x1d8 MUX_M1 /* UART4_RXD (IOMG118) */ + 0x1dc MUX_M1 /* UART4_TXD (IOMG119) */ + >; + }; + + uart5_pmx_func: uart5_pmx_func { + pinctrl-single,pins = < + 0x1c8 MUX_M1 /* UART5_RXD (IOMG114) */ + 0x1cc MUX_M1 /* UART5_TXD (IOMG115) */ + >; + }; + + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0xe8 MUX_M0 /* I2C0_SCL (IOMG058) */ + 0xec MUX_M0 /* I2C0_SDA (IOMG059) */ + >; + }; + + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0xf0 MUX_M0 /* I2C1_SCL (IOMG060) */ + 0xf4 MUX_M0 /* I2C1_SDA (IOMG061) */ + >; + }; + + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0xf8 MUX_M0 /* I2C2_SCL (IOMG062) */ + 0xfc MUX_M0 /* I2C2_SDA (IOMG063) */ + >; + }; + }; + + pmx1: pinmux@f7010800 { + + pinctrl-names = "default"; + pinctrl-0 = < + &boot_sel_cfg_func + &hkadc_ssi_cfg_func + &codec_clk_cfg_func + &pwm_in_cfg_func + &bl_pwm_cfg_func + >; + + boot_sel_cfg_func: boot_sel_cfg_func { + pinctrl-single,pins = < + 0x0 0x0 /* BOOT_SEL (IOCFG000) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + hkadc_ssi_cfg_func: hkadc_ssi_cfg_func { + pinctrl-single,pins = < + 0x6c 0x0 /* HKADC_SSI (IOCFG027) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + emmc_clk_cfg_func: emmc_clk_cfg_func { + pinctrl-single,pins = < + 0x104 0x0 /* EMMC_CLK (IOCFG065) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + emmc_cfg_func: emmc_cfg_func { + pinctrl-single,pins = < + 0x108 0x0 /* EMMC_CMD (IOCFG066) */ + 0x10c 0x0 /* EMMC_DATA0 (IOCFG067) */ + 0x110 0x0 /* EMMC_DATA1 (IOCFG068) */ + 0x114 0x0 /* EMMC_DATA2 (IOCFG069) */ + 0x118 0x0 /* EMMC_DATA3 (IOCFG070) */ + 0x11c 0x0 /* EMMC_DATA4 (IOCFG071) */ + 0x120 0x0 /* EMMC_DATA5 (IOCFG072) */ + 0x124 0x0 /* EMMC_DATA6 (IOCFG073) */ + 0x128 0x0 /* EMMC_DATA7 (IOCFG074) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + emmc_rst_cfg_func: emmc_rst_cfg_func { + pinctrl-single,pins = < + 0x12c 0x0 /* EMMC_RST_N (IOCFG075) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + sd_clk_cfg_func: sd_clk_cfg_func { + pinctrl-single,pins = < + 0xc 0x0 /* SD_CLK (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + sd_clk_cfg_idle: sd_clk_cfg_idle { + pinctrl-single,pins = < + 0xc 0x0 /* SD_CLK (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + sd_cfg_func: sd_cfg_func { + pinctrl-single,pins = < + 0x10 0x0 /* SD_CMD (IOCFG004) */ + 0x14 0x0 /* SD_DATA0 (IOCFG005) */ + 0x18 0x0 /* SD_DATA1 (IOCFG006) */ + 0x1c 0x0 /* SD_DATA2 (IOCFG007) */ + 0x20 0x0 /* SD_DATA3 (IOCFG008) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + sd_cfg_idle: sd_cfg_idle { + pinctrl-single,pins = < + 0x10 0x0 /* SD_CMD (IOCFG004) */ + 0x14 0x0 /* SD_DATA0 (IOCFG005) */ + 0x18 0x0 /* SD_DATA1 (IOCFG006) */ + 0x1c 0x0 /* SD_DATA2 (IOCFG007) */ + 0x20 0x0 /* SD_DATA3 (IOCFG008) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + sdio_clk_cfg_func: sdio_clk_cfg_func { + pinctrl-single,pins = < + 0x134 0x0 /* SDIO_CLK (IOCFG077) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + sdio_clk_cfg_idle: sdio_clk_cfg_idle { + pinctrl-single,pins = < + 0x134 0x0 /* SDIO_CLK (IOCFG077) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x138 0x0 /* SDIO_CMD (IOCFG078) */ + 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ + 0x140 0x0 /* SDIO_DATA1 (IOCFG080) */ + 0x144 0x0 /* SDIO_DATA2 (IOCFG081) */ + 0x148 0x0 /* SDIO_DATA3 (IOCFG082) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + sdio_cfg_idle: sdio_cfg_idle { + pinctrl-single,pins = < + 0x138 0x0 /* SDIO_CMD (IOCFG078) */ + 0x13c 0x0 /* SDIO_DATA0 (IOCFG079) */ + 0x140 0x0 /* SDIO_DATA1 (IOCFG080) */ + 0x144 0x0 /* SDIO_DATA2 (IOCFG081) */ + 0x148 0x0 /* SDIO_DATA3 (IOCFG082) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + isp_cfg_func1: isp_cfg_func1 { + pinctrl-single,pins = < + 0x28 0x0 /* ISP_PWDN0 (IOCFG010) */ + 0x2c 0x0 /* ISP_PWDN1 (IOCFG011) */ + 0x30 0x0 /* ISP_PWDN2 (IOCFG012) */ + 0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */ + 0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */ + 0x3c 0x0 /* ISP_PWM (IOCFG015) */ + 0x40 0x0 /* ISP_CCLK0 (IOCFG016) */ + 0x44 0x0 /* ISP_CCLK1 (IOCFG017) */ + 0x48 0x0 /* ISP_RESETB0 (IOCFG018) */ + 0x4c 0x0 /* ISP_RESETB1 (IOCFG019) */ + 0x50 0x0 /* ISP_STROBE0 (IOCFG020) */ + 0x58 0x0 /* ISP_SDA0 (IOCFG022) */ + 0x5c 0x0 /* ISP_SCL0 (IOCFG023) */ + 0x60 0x0 /* ISP_SDA1 (IOCFG024) */ + 0x64 0x0 /* ISP_SCL1 (IOCFG025) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + isp_cfg_idle1: isp_cfg_idle1 { + pinctrl-single,pins = < + 0x34 0x0 /* ISP_SHUTTER0 (IOCFG013) */ + 0x38 0x0 /* ISP_SHUTTER1 (IOCFG014) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + isp_cfg_func2: isp_cfg_func2 { + pinctrl-single,pins = < + 0x54 0x0 /* ISP_STROBE1 (IOCFG021) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + codec_clk_cfg_func: codec_clk_cfg_func { + pinctrl-single,pins = < + 0x70 0x0 /* CODEC_CLK (IOCFG028) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + codec_clk_cfg_idle: codec_clk_cfg_idle { + pinctrl-single,pins = < + 0x70 0x0 /* CODEC_CLK (IOCFG028) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + codec_cfg_func1: codec_cfg_func1 { + pinctrl-single,pins = < + 0x74 0x0 /* DMIC_CLK (IOCFG029) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + codec_cfg_func2: codec_cfg_func2 { + pinctrl-single,pins = < + 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ + 0x7c 0x0 /* CODEC_DI (IOCFG031) */ + 0x80 0x0 /* CODEC_DO (IOCFG032) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + codec_cfg_idle2: codec_cfg_idle2 { + pinctrl-single,pins = < + 0x78 0x0 /* CODEC_SYNC (IOCFG030) */ + 0x7c 0x0 /* CODEC_DI (IOCFG031) */ + 0x80 0x0 /* CODEC_DO (IOCFG032) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + fm_cfg_func: fm_cfg_func { + pinctrl-single,pins = < + 0x84 0x0 /* FM_XCLK (IOCFG033) */ + 0x88 0x0 /* FM_XFS (IOCFG034) */ + 0x8c 0x0 /* FM_DI (IOCFG035) */ + 0x90 0x0 /* FM_DO (IOCFG036) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + bt_cfg_func: bt_cfg_func { + pinctrl-single,pins = < + 0x94 0x0 /* BT_XCLK (IOCFG037) */ + 0x98 0x0 /* BT_XFS (IOCFG038) */ + 0x9c 0x0 /* BT_DI (IOCFG039) */ + 0xa0 0x0 /* BT_DO (IOCFG040) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + bt_cfg_idle: bt_cfg_idle { + pinctrl-single,pins = < + 0x94 0x0 /* BT_XCLK (IOCFG037) */ + 0x98 0x0 /* BT_XFS (IOCFG038) */ + 0x9c 0x0 /* BT_DI (IOCFG039) */ + 0xa0 0x0 /* BT_DO (IOCFG040) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + pwm_in_cfg_func: pwm_in_cfg_func { + pinctrl-single,pins = < + 0xbc 0x0 /* PWM_IN (IOCFG047) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + bl_pwm_cfg_func: bl_pwm_cfg_func { + pinctrl-single,pins = < + 0xc0 0x0 /* BL_PWM (IOCFG048) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + uart0_cfg_func1: uart0_cfg_func1 { + pinctrl-single,pins = < + 0xc4 0x0 /* UART0_RXD (IOCFG049) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + uart0_cfg_func2: uart0_cfg_func2 { + pinctrl-single,pins = < + 0xc8 0x0 /* UART0_TXD (IOCFG050) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + uart1_cfg_func1: uart1_cfg_func1 { + pinctrl-single,pins = < + 0xcc 0x0 /* UART1_CTS_N (IOCFG051) */ + 0xd4 0x0 /* UART1_RXD (IOCFG053) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + uart1_cfg_func2: uart1_cfg_func2 { + pinctrl-single,pins = < + 0xd0 0x0 /* UART1_RTS_N (IOCFG052) */ + 0xd8 0x0 /* UART1_TXD (IOCFG054) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0xdc 0x0 /* UART2_CTS_N (IOCFG055) */ + 0xe0 0x0 /* UART2_RTS_N (IOCFG056) */ + 0xe4 0x0 /* UART2_RXD (IOCFG057) */ + 0xe8 0x0 /* UART2_TXD (IOCFG058) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x190 0x0 /* UART3_CTS_N (IOCFG100) */ + 0x194 0x0 /* UART3_RTS_N (IOCFG101) */ + 0x198 0x0 /* UART3_RXD (IOCFG102) */ + 0x19c 0x0 /* UART3_TXD (IOCFG103) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x1e0 0x0 /* UART4_CTS_N (IOCFG120) */ + 0x1e4 0x0 /* UART4_RTS_N (IOCFG121) */ + 0x1e8 0x0 /* UART4_RXD (IOCFG122) */ + 0x1ec 0x0 /* UART4_TXD (IOCFG123) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + uart5_cfg_func: uart5_cfg_func { + pinctrl-single,pins = < + 0x1d8 0x0 /* UART4_RXD (IOCFG118) */ + 0x1dc 0x0 /* UART4_TXD (IOCFG119) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0xec 0x0 /* I2C0_SCL (IOCFG059) */ + 0xf0 0x0 /* I2C0_SDA (IOCFG060) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0xf4 0x0 /* I2C1_SCL (IOCFG061) */ + 0xf8 0x0 /* I2C1_SDA (IOCFG062) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + i2c2_cfg_func: i2c2_cfg_func { + pinctrl-single,pins = < + 0xfc 0x0 /* I2C2_SCL (IOCFG063) */ + 0x100 0x0 /* I2C2_SDA (IOCFG064) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + }; + + pmx2: pinmux@f8001800 { + + pinctrl-names = "default"; + pinctrl-0 = < + &rstout_n_cfg_func + >; + + rstout_n_cfg_func: rstout_n_cfg_func { + pinctrl-single,pins = < + 0x0 0x0 /* RSTOUT_N (IOCFG000) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + pmu_peri_en_cfg_func: pmu_peri_en_cfg_func { + pinctrl-single,pins = < + 0x4 0x0 /* PMU_PERI_EN (IOCFG001) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + sysclk0_en_cfg_func: sysclk0_en_cfg_func { + pinctrl-single,pins = < + 0x8 0x0 /* SYSCLK0_EN (IOCFG002) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + jtag_tdo_cfg_func: jtag_tdo_cfg_func { + pinctrl-single,pins = < + 0xc 0x0 /* JTAG_TDO (IOCFG003) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + + rf_reset_cfg_func: rf_reset_cfg_func { + pinctrl-single,pins = < + 0x70 0x0 /* RF_RESET0 (IOCFG028) */ + 0x74 0x0 /* RF_RESET1 (IOCFG029) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; + }; + }; +}; diff --git a/include/dt-bindings/pinctrl/hisi.h b/include/dt-bindings/pinctrl/hisi.h new file mode 100644 index 000000000000..38f1ea879ea1 --- /dev/null +++ b/include/dt-bindings/pinctrl/hisi.h @@ -0,0 +1,59 @@ +/* + * This header provides constants for hisilicon pinctrl bindings. + * + * Copyright (c) 2015 Hisilicon Limited. + * Copyright (c) 2015 Linaro Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_PINCTRL_HISI_H +#define _DT_BINDINGS_PINCTRL_HISI_H + +/* iomg bit definition */ +#define MUX_M0 0 +#define MUX_M1 1 +#define MUX_M2 2 +#define MUX_M3 3 +#define MUX_M4 4 +#define MUX_M5 5 +#define MUX_M6 6 +#define MUX_M7 7 + +/* iocg bit definition */ +#define PULL_MASK (3) +#define PULL_DIS (0) +#define PULL_UP (1 << 0) +#define PULL_DOWN (1 << 1) + +/* drive strength definition */ +#define DRIVE_MASK (7 << 4) +#define DRIVE1_02MA (0 << 4) +#define DRIVE1_04MA (1 << 4) +#define DRIVE1_08MA (2 << 4) +#define DRIVE1_10MA (3 << 4) +#define DRIVE2_02MA (0 << 4) +#define DRIVE2_04MA (1 << 4) +#define DRIVE2_08MA (2 << 4) +#define DRIVE2_10MA (3 << 4) +#define DRIVE3_04MA (0 << 4) +#define DRIVE3_08MA (1 << 4) +#define DRIVE3_12MA (2 << 4) +#define DRIVE3_16MA (3 << 4) +#define DRIVE3_20MA (4 << 4) +#define DRIVE3_24MA (5 << 4) +#define DRIVE3_32MA (6 << 4) +#define DRIVE3_40MA (7 << 4) +#define DRIVE4_02MA (0 << 4) +#define DRIVE4_04MA (2 << 4) +#define DRIVE4_08MA (4 << 4) +#define DRIVE4_10MA (6 << 4) + +#endif From 60dac1b19b6af6ddc4df68d163e2d7508057c007 Mon Sep 17 00:00:00 2001 From: Zhong Kaihua Date: Wed, 13 Apr 2016 07:55:42 +0800 Subject: [PATCH 06/19] arm64: dts: add Hi6220 spi configuration nodes Add Hi6220 spi configuration nodes. Disable by default in hi6220.dtsi and enable it in board dts for usage of 96boards LS mezzanine board. Signed-off-by: Zhong Kaihua Signed-off-by: Guodong Xu Reviewed-by: Rob Herring Signed-off-by: Wei Xu --- .../arm64/boot/dts/hisilicon/hi6220-hikey.dts | 6 ++++++ arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 15 +++++++++++++ .../boot/dts/hisilicon/hikey-pinctrl.dtsi | 21 +++++++++++++++++++ 3 files changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 3d9e8b2d2b18..7545e363fbde 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -40,6 +40,12 @@ <0x00000000 0x06e00000 0x00000000 0x0060f000>, <0x00000000 0x07410000 0x00000000 0x36bf0000>; }; + + soc { + spi0: spi@f7106000 { + status = "ok"; + }; + }; }; &uart2 { diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index df56571703b0..7bcfffe5dfd9 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -567,5 +567,20 @@ clocks = <&ao_ctrl 2>; clock-names = "apb_pclk"; }; + + spi0: spi@f7106000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x0 0xf7106000 0x0 0x1000>; + interrupts = <0 50 4>; + bus-id = <0>; + enable-dma = <0>; + clocks = <&sys_ctrl HI6220_SPI_CLK>; + clock-names = "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>; + num-cs = <1>; + cs-gpios = <&gpio6 2 0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi index 28806df214d7..0916e8459d6b 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey-pinctrl.dtsi @@ -221,6 +221,15 @@ 0xfc MUX_M0 /* I2C2_SDA (IOMG063) */ >; }; + + spi0_pmx_func: spi0_pmx_func { + pinctrl-single,pins = < + 0x1a0 MUX_M1 /* SPI0_DI (IOMG104) */ + 0x1a4 MUX_M1 /* SPI0_DO (IOMG105) */ + 0x1a8 MUX_M1 /* SPI0_CS_N (IOMG106) */ + 0x1ac MUX_M1 /* SPI0_CLK (IOMG107) */ + >; + }; }; pmx1: pinmux@f7010800 { @@ -625,6 +634,18 @@ pinctrl-single,bias-pullup = ; pinctrl-single,drive-strength = ; }; + + spi0_cfg_func: spi0_cfg_func { + pinctrl-single,pins = < + 0x1b0 0x0 /* SPI0_DI (IOCFG108) */ + 0x1b4 0x0 /* SPI0_DO (IOCFG109) */ + 0x1b8 0x0 /* SPI0_CS_N (IOCFG110) */ + 0x1bc 0x0 /* SPI0_CLK (IOCFG111) */ + >; + pinctrl-single,bias-pulldown = ; + pinctrl-single,bias-pullup = ; + pinctrl-single,drive-strength = ; + }; }; pmx2: pinmux@f8001800 { From 5ff3a4ddd142ac2ac4e6d4aa65cf0f7bf2d9679a Mon Sep 17 00:00:00 2001 From: Xinwei Kong Date: Wed, 13 Apr 2016 07:55:43 +0800 Subject: [PATCH 07/19] arm64: dts: add all hi6220 i2c nodes This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc use this I2C IP of Synopsys Designware for HiKey board. Signed-off-by: Xinwei Kong Signed-off-by: Chen Feng Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 33 +++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 7bcfffe5dfd9..4fc034724a9c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -582,5 +582,38 @@ cs-gpios = <&gpio6 2 0>; status = "disabled"; }; + + i2c0: i2c@f7100000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7100000 0x0 0x1000>; + interrupts = <0 44 4>; + clocks = <&sys_ctrl HI6220_I2C0_CLK>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>; + status = "disabled"; + }; + + i2c1: i2c@f7101000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7101000 0x0 0x1000>; + clocks = <&sys_ctrl HI6220_I2C1_CLK>; + interrupts = <0 45 4>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>; + status = "disabled"; + }; + + i2c2: i2c@f7102000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0xf7102000 0x0 0x1000>; + clocks = <&sys_ctrl HI6220_I2C2_CLK>; + interrupts = <0 46 4>; + i2c-sda-hold-time-ns = <300>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; + status = "disabled"; + }; }; }; From 0c2317512d51f62401fdb7dd9d2ab5c932ac0ab9 Mon Sep 17 00:00:00 2001 From: Guodong Xu Date: Wed, 13 Apr 2016 07:55:44 +0800 Subject: [PATCH 08/19] arm64: dts: hikey: enable i2c0 and i2c1 for working with mezzanine boards In HiKey board dts file, enable i2c0 and i2c1 for working with 96boards' LS mezzanine. Signed-off-by: Guodong Xu Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 7545e363fbde..3dbf51b609a1 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -45,6 +45,14 @@ spi0: spi@f7106000 { status = "ok"; }; + + i2c0: i2c@f7100000 { + status = "ok"; + }; + + i2c1: i2c@f7101000 { + status = "ok"; + }; }; }; From b4b31a7cd797dcadba32a2f283923aec7583462e Mon Sep 17 00:00:00 2001 From: Zhangfei Gao Date: Wed, 13 Apr 2016 07:55:45 +0800 Subject: [PATCH 09/19] arm64: dts: Add hi6220 usb node Add USB nodes for Hi6220 Signed-off-by: Zhangfei Gao Acked-by: Rob Herring Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 32 +++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 4fc034724a9c..4d1d31f45d38 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -615,5 +615,37 @@ pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>; status = "disabled"; }; + + fixed_5v_hub: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed_5v_hub"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + gpio = <&gpio0 7 0>; + regulator-always-on; + }; + + usb_phy: usbphy { + compatible = "hisilicon,hi6220-usb-phy"; + #phy-cells = <0>; + phy-supply = <&fixed_5v_hub>; + hisilicon,peripheral-syscon = <&sys_ctrl>; + }; + + usb: usb@f72c0000 { + compatible = "hisilicon,hi6220-usb"; + reg = <0x0 0xf72c0000 0x0 0x40000>; + phys = <&usb_phy>; + phy-names = "usb2-phy"; + clocks = <&sys_ctrl HI6220_USBOTG_HCLK>; + clock-names = "otg"; + dr_mode = "otg"; + g-use-dma; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 128 128 128 128>; + interrupts = <0 77 0x4>; + }; }; }; From 8607357016f6b643787727cf35ecdcfb49c3cf23 Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Wed, 13 Apr 2016 07:55:46 +0800 Subject: [PATCH 10/19] arm64: dts: add mailbox node for Hi6220 This patch add device mailbox node for Hi6220 in DT. Signed-off-by: Leo Yan Acked-by: Jassi Brar Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 4d1d31f45d38..d71c51ff2f83 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -647,5 +647,13 @@ g-tx-fifo-size = <128 128 128 128 128 128>; interrupts = <0 77 0x4>; }; + + mailbox: mailbox@f7510000 { + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06dff800 0x0 0x0800>; /* Mailbox buffer */ + interrupts = ; + #mbox-cells = <3>; + }; }; }; From 998605407249dd278aef28c1cc2ce00f90c09eaa Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Wed, 13 Apr 2016 07:55:47 +0800 Subject: [PATCH 11/19] arm64: dts: add Hi6220's stub clock node Enable SRAM node and stub clock node for Hi6220, which uses mailbox channel 1 for CPU's frequency change. Furthermore, add the CPU clock phandle in CPU's node and using operating-points-v2 to register operating points. So can be used by cpufreq-dt driver. Signed-off-by: Leo Yan Acked-by: Jassi Brar Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 56 +++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index d71c51ff2f83..3a665efd197b 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -82,6 +82,11 @@ device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; + clocks = <&stub_clock 0>; + operating-points-v2 = <&cpu_opp_table>; + cooling-min-level = <4>; + cooling-max-level = <0>; + #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -90,6 +95,7 @@ device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -98,6 +104,7 @@ device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -106,6 +113,7 @@ device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -114,6 +122,7 @@ device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -122,6 +131,7 @@ device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -130,6 +140,7 @@ device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -138,10 +149,42 @@ device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; }; + cpu_opp_table: cpu_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <208000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <500000>; + }; + opp01 { + opp-hz = /bits/ 64 <432000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <500000>; + }; + opp02 { + opp-hz = /bits/ 64 <729000000>; + opp-microvolt = <1090000>; + clock-latency-ns = <500000>; + }; + opp03 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1180000>; + clock-latency-ns = <500000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1330000>; + clock-latency-ns = <500000>; + }; + }; + gic: interrupt-controller@f6801000 { compatible = "arm,gic-400"; reg = <0x0 0xf6801000 0 0x1000>, /* GICD */ @@ -169,6 +212,11 @@ #size-cells = <2>; ranges; + sram: sram@fff80000 { + compatible = "hisilicon,hi6220-sramctrl", "syscon"; + reg = <0x0 0xfff80000 0x0 0x12000>; + }; + ao_ctrl: ao_ctrl@f7800000 { compatible = "hisilicon,hi6220-aoctrl", "syscon"; reg = <0x0 0xf7800000 0x0 0x2000>; @@ -194,6 +242,14 @@ #clock-cells = <1>; }; + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx"; + mboxes = <&mailbox 1 0 11>; + }; + uart0: uart@f8015000 { /* console */ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf8015000 0x0 0x1000>; From c2aad93200fa2dbbc6c48632e619494080d64796 Mon Sep 17 00:00:00 2001 From: Guodong Xu Date: Wed, 13 Apr 2016 07:55:48 +0800 Subject: [PATCH 12/19] arm64: dts: hi6220: add pinctrl for uarts and enable them Add pinctrl for uart2 uart3 and uart4. Enable uart1 uart2 and uart3. Signed-off-by: Guodong Xu Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 12 ++++++++++++ arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 9 +++++++++ 2 files changed, 21 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 3dbf51b609a1..30c92bd0855f 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -53,6 +53,18 @@ i2c1: i2c@f7101000 { status = "ok"; }; + + uart1: uart@f7111000 { + status = "ok"; + }; + + uart2: uart@f7112000 { + status = "ok"; + }; + + uart3: uart@f7113000 { + status = "ok"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 3a665efd197b..e8bb81fe8479 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -266,6 +266,8 @@ clocks = <&sys_ctrl HI6220_UART1_PCLK>, <&sys_ctrl HI6220_UART1_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func1 &uart1_cfg_func2>; status = "disabled"; }; @@ -276,6 +278,8 @@ clocks = <&sys_ctrl HI6220_UART2_PCLK>, <&sys_ctrl HI6220_UART2_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; status = "disabled"; }; @@ -286,6 +290,9 @@ clocks = <&sys_ctrl HI6220_UART3_PCLK>, <&sys_ctrl HI6220_UART3_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + status = "disabled"; }; uart4: uart@f7114000 { @@ -295,6 +302,8 @@ clocks = <&sys_ctrl HI6220_UART4_PCLK>, <&sys_ctrl HI6220_UART4_PCLK>; clock-names = "uartclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; status = "disabled"; }; From ad05f38ba98ab01aebf52cc1d788df8272e6daa8 Mon Sep 17 00:00:00 2001 From: Guodong Xu Date: Wed, 13 Apr 2016 07:55:49 +0800 Subject: [PATCH 13/19] arm64: dts: add LED nodes for hi6220-hikey Add LED nodes for hi6220-hikey. There are total 6 LEDs on HiKey. Four general purposed, one for WiFi activity, and one for Bluetooth activity. Signed-off-by: Guodong Xu Signed-off-by: Wei Xu --- .../arm64/boot/dts/hisilicon/hi6220-hikey.dts | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 30c92bd0855f..b7c41f83c61e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -66,6 +66,47 @@ status = "ok"; }; }; + + leds { + compatible = "gpio-leds"; + user_led4 { + label = "user_led4"; + gpios = <&gpio4 0 0>; /* <&gpio_user_led_1>; */ + linux,default-trigger = "heartbeat"; + }; + + user_led3 { + label = "user_led3"; + gpios = <&gpio4 1 0>; /* <&gpio_user_led_2>; */ + linux,default-trigger = "mmc0"; + }; + + user_led2 { + label = "user_led2"; + gpios = <&gpio4 2 0>; /* <&gpio_user_led_3>; */ + linux,default-trigger = "mmc1"; + }; + + user_led1 { + label = "user_led1"; + gpios = <&gpio4 3 0>; /* <&gpio_user_led_4>; */ + linux,default-trigger = "cpu0"; + }; + + wlan_active_led { + label = "wifi_active"; + gpios = <&gpio3 5 0>; /* <&gpio_wlan_active_led>; */ + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "bt_active"; + gpios = <&gpio4 7 0>; /* <&gpio_bt_active_led>; */ + linux,default-trigger = "hci0rx"; + default-state = "off"; + }; + }; }; &uart2 { From a817137a6c3079c99954396afe94bb5a7cbfa251 Mon Sep 17 00:00:00 2001 From: Chen Feng Date: Wed, 13 Apr 2016 07:55:50 +0800 Subject: [PATCH 14/19] arm64: dts: hikey: Add hi655x pmic dts node Add the mfd hi655x dts node and regulator support on hi6220 platform. Signed-off-by: Chen Feng Signed-off-by: Fei Wang Signed-off-by: Xinwei Kong Signed-off-by: Guodong Xu Reviewed-by: Haojian Zhuang Reviewed-by: Rob Herring Acked-by: Lee Jones Signed-off-by: Wei Xu --- .../arm64/boot/dts/hisilicon/hi6220-hikey.dts | 87 ++++++++++++++++++- 1 file changed, 86 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index b7c41f83c61e..cc1148d911ad 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -6,9 +6,9 @@ */ /dts-v1/; - #include "hi6220.dtsi" #include "hikey-pinctrl.dtsi" +#include / { model = "HiKey Development Board"; @@ -107,6 +107,91 @@ default-state = "off"; }; }; + + pmic: pmic@f8000000 { + compatible = "hisilicon,hi655x-pmic"; + reg = <0x0 0xf8000000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + + regulators { + ldo2: LDO2 { + regulator-name = "LDO2_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo7: LDO7 { + regulator-name = "LDO7_SDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo10: LDO10 { + regulator-name = "LDO10_2V85"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + + ldo13: LDO13 { + regulator-name = "LDO13_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo14: LDO14 { + regulator-name = "LDO14_2V8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo15: LDO15 { + regulator-name = "LDO15_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1950000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo17: LDO17 { + regulator-name = "LDO17_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo19: LDO19 { + regulator-name = "LDO19_3V0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + + ldo21: LDO21 { + regulator-name = "LDO21_1V8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo22: LDO22 { + regulator-name = "LDO22_1V2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + }; + }; }; &uart2 { From d6b259d4faa1670f372969141323c6fe4b3b7db9 Mon Sep 17 00:00:00 2001 From: Xinwei Kong Date: Wed, 13 Apr 2016 07:55:51 +0800 Subject: [PATCH 15/19] arm64: dts: add dwmmc nodes for hi6220 Add all three dwmmc nodes description for hi6220 Signed-off-by: Guodong Xu Signed-off-by: Xinwei Kong Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 52 +++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index e8bb81fe8479..7b7bbf66f004 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -720,5 +720,57 @@ interrupts = ; #mbox-cells = <3>; }; + + dwmmc_0: dwmmc0@f723d000 { + compatible = "hisilicon,hi6220-dw-mshc"; + num-slots = <0x1>; + cap-mmc-highspeed; + non-removable; + reg = <0x0 0xf723d000 0x0 0x1000>; + interrupts = <0x0 0x48 0x4>; + clocks = <&sys_ctrl 2>, <&sys_ctrl 1>; + clock-names = "ciu", "biu"; + bus-width = <0x8>; + vmmc-supply = <&ldo19>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func + &emmc_cfg_func &emmc_rst_cfg_func>; + }; + + dwmmc_1: dwmmc1@f723e000 { + compatible = "hisilicon,hi6220-dw-mshc"; + num-slots = <0x1>; + card-detect-delay = <200>; + hisilicon,peripheral-syscon = <&ao_ctrl>; + cap-sd-highspeed; + reg = <0x0 0xf723e000 0x0 0x1000>; + interrupts = <0x0 0x49 0x4>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&sys_ctrl 4>, <&sys_ctrl 3>; + clock-names = "ciu", "biu"; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + bus-width = <0x4>; + disable-wp; + cd-gpios = <&gpio1 0 1>; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; + pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; + }; + + dwmmc_2: dwmmc2@f723f000 { + compatible = "hisilicon,hi6220-dw-mshc"; + num-slots = <0x1>; + reg = <0x0 0xf723f000 0x0 0x1000>; + interrupts = <0x0 0x4a 0x4>; + clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>; + clock-names = "ciu", "biu"; + bus-width = <0x4>; + broken-cd; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>; + pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; + }; }; }; From 841478d4ae2cb7205fc7940e7140ef0efb3fabf7 Mon Sep 17 00:00:00 2001 From: Guodong Xu Date: Wed, 13 Apr 2016 07:55:52 +0800 Subject: [PATCH 16/19] arm64: dts: add wifi nodes support for hi6220-hikey Add wifi nodes support for hi6220-hikey Signed-off-by: Guodong Xu Signed-off-by: Wei Xu --- .../arm64/boot/dts/hisilicon/hi6220-hikey.dts | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index cc1148d911ad..e92a30c87a82 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -65,6 +65,35 @@ uart3: uart@f7113000 { status = "ok"; }; + + dwmmc_2: dwmmc2@f723f000 { + ti,non-removable; + non-removable; + /* WL_EN */ + vmmc-supply = <&wlan_en_reg>; + + #address-cells = <0x1>; + #size-cells = <0x0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */ + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + }; + + wlan_en_reg: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* WLAN_EN GPIO */ + gpio = <&gpio0 5 0>; + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; }; leds { From 2158ab084b721da7b0e4963ac91fd96775b80916 Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Tue, 29 Mar 2016 19:27:14 +0800 Subject: [PATCH 17/19] arm64: dts: register Hi6220's thermal sensor Bind thermal sensor driver for Hi6220. Signed-off-by: Leo Yan Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 7b7bbf66f004..fc61a164eceb 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -772,5 +772,14 @@ pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>; pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; }; + + tsensor: tsensor@0,f7030700 { + compatible = "hisilicon,tsensor"; + reg = <0x0 0xf7030700 0x0 0x1000>; + interrupts = ; + clocks = <&sys_ctrl 22>; + clock-names = "thermal_clk"; + #thermal-sensor-cells = <1>; + }; }; }; From cd0b69ec0eb5e489954d7125b934457ac7acf6f7 Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Tue, 29 Mar 2016 19:27:15 +0800 Subject: [PATCH 18/19] arm64: dts: register Hi6220's thermal zone for power allocator With profiling Hi6220's power modeling so get dynamic coefficient and sustainable power. So pass these parameters from DT. Now enable power allocator with only one actor for CPU part, so directly use cluster0's thermal sensor for monitoring temperature. Reviewed-by: Javi Merino Signed-off-by: Leo Yan Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 35 +++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index fc61a164eceb..0c8df8a93dbe 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include / { compatible = "hisilicon,hi6220"; @@ -88,6 +89,7 @@ cooling-max-level = <0>; #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; + dynamic-power-coefficient = <311>; }; cpu1: cpu@1 { @@ -781,5 +783,38 @@ clock-names = "thermal_clk"; #thermal-sensor-cells = <1>; }; + + thermal-zones { + + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <3326>; + + /* sensor ID */ + thermal-sensors = <&tsensor 2>; + + trips { + threshold: trip-point@0 { + temperature = <65000>; + hysteresis = <0>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <75000>; + hysteresis = <0>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; }; From 6485160396fcec2fa8a0acfa7c8c090f020db694 Mon Sep 17 00:00:00 2001 From: Leo Yan Date: Fri, 26 Feb 2016 13:28:34 +0800 Subject: [PATCH 19/19] arm64: dts: Add L2 cache topology to Hi6220 This patch adds the L2 cache topology on Hi6220. Hi6220 has two clusters, every cluster has 512KiB L2 cache (32KiB x 16 ways). Signed-off-by: Leo Yan Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 0c8df8a93dbe..189d21541f9c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -83,6 +83,7 @@ device_type = "cpu"; reg = <0x0 0x0>; enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; cooling-min-level = <4>; @@ -97,6 +98,7 @@ device_type = "cpu"; reg = <0x0 0x1>; enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -106,6 +108,7 @@ device_type = "cpu"; reg = <0x0 0x2>; enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -115,6 +118,7 @@ device_type = "cpu"; reg = <0x0 0x3>; enable-method = "psci"; + next-level-cache = <&CLUSTER0_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -124,6 +128,7 @@ device_type = "cpu"; reg = <0x0 0x100>; enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -133,6 +138,7 @@ device_type = "cpu"; reg = <0x0 0x101>; enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -142,6 +148,7 @@ device_type = "cpu"; reg = <0x0 0x102>; enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; @@ -151,9 +158,18 @@ device_type = "cpu"; reg = <0x0 0x103>; enable-method = "psci"; + next-level-cache = <&CLUSTER1_L2>; operating-points-v2 = <&cpu_opp_table>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; }; + + CLUSTER0_L2: l2-cache0 { + compatible = "cache"; + }; + + CLUSTER1_L2: l2-cache1 { + compatible = "cache"; + }; }; cpu_opp_table: cpu_opp_table {