From 17ee083b7897ab27b4949c42de805889ebd2b4c5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 5 May 2011 17:23:10 +0100 Subject: [PATCH] ARM: 6894/1: mmci: trigger card detect IRQs on falling and rising edges Right now the card detect IRQ for MMCI is requested without any flags which will give some default machine-specified IRQ behaviour. However on the U300 rising+falling edges (such as can be expected from a simple GPIO to generate when inserting/removing a card) need to be requested explicitly. Cc: Rabin Vincent Cc: Ulf Hansson Cc: Sebastian Rasmussen Signed-off-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 5da5bea0f9f0..7721de942c69 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1144,9 +1144,17 @@ static int __devinit mmci_probe(struct amba_device *dev, else if (ret != -ENOSYS) goto err_gpio_cd; + /* + * A gpio pin that will detect cards when inserted and removed + * will most likely want to trigger on the edges if it is + * 0 when ejected and 1 when inserted (or mutatis mutandis + * for the inverted case) so we request triggers on both + * edges. + */ ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd), - mmci_cd_irq, 0, - DRIVER_NAME " (cd)", host); + mmci_cd_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + DRIVER_NAME " (cd)", host); if (ret >= 0) host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd); }