diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 369bab16a824..8173d0634d68 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -431,6 +431,12 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
+	/*
+	 * Make sure UX_EXIT_PX is cleared as that causes issues with some
+	 * PHYs. Also, this bit is not supposed to be used in normal operation.
+	 */
+	reg &= ~DWC3_GUSB3PIPECTL_UX_EXIT_PX;
+
 	/*
 	 * Above 1.94a, it is recommended to set DWC3_GUSB3PIPECTL_SUSPHY
 	 * to '0' during coreConsultant configuration. So default value
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 2b9e4ca3c932..fd640f11c0fe 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -232,6 +232,7 @@
 #define DWC3_GUSB3PIPECTL_PHYSOFTRST	(1 << 31)
 #define DWC3_GUSB3PIPECTL_U2SSINP3OK	(1 << 29)
 #define DWC3_GUSB3PIPECTL_DISRXDETINP3	(1 << 28)
+#define DWC3_GUSB3PIPECTL_UX_EXIT_PX	(1 << 27)
 #define DWC3_GUSB3PIPECTL_REQP1P2P3	(1 << 24)
 #define DWC3_GUSB3PIPECTL_DEP1P2P3(n)	((n) << 19)
 #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK	DWC3_GUSB3PIPECTL_DEP1P2P3(7)