FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-16 22:10:24 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

Browse Source 
John W. Linville says:

====================
This pull request is intended for the 3.11 stream.  It is a bit
larger than usual, as it includes pulls from most of my feeder trees
as well...

For the Bluetooth bits, Gustavo says:

"A few fixes and devices ID additions for 3.11:

 * There are 4 new ath3k device ids
 * Fixed stack memory usage in ath3k.
 * Fixed the init process of BlueFRITZ! devices, they were failing to init
   due to an unsupported command we sent.
 * Fixed wrong use of PTR_ERR in btusb code that was preventing intel devices
   to work properly.
 * Fixed race condition between hci_register_dev() and hci_dev_open() that
   could cause a NULL pointer dereference.
 * Fixed race condition that could call hci_req_cmd_complete() and make some
   devices to fail as showed in the log added to the commit message."

Regarding the NFC bits, Samuel says:

"We have:

1) A build failure fix for the NCI SPI transport layer due to a
   missing CRC_CCITT Kconfig dependency.

2) A netlink command rename: CMD_FW_UPLOAD was merged during the 3.11
   merge window but the typical terminology for loading a firmware to a
   target is firmware download rather than upload. In order to avoid any
   confusion in a file exported to userspace, we rename this command to
   CMD_FW_DOWNLOAD."

Samuel's item #2 isn't strictly a fix, but it seems safe and should
avoid confusion in the future.

As for the mac80211 bits, Johannes says:

"I only have three fixes this time, a fix for a suspend regression, a
patch correcting the initiator in regulatory code and one fix for mesh
station powersave."

With respect to the iwlwifi bits, Johannes says:

"We have a scan fix for passive channels, a new PCI device ID for an old
device, a NIC reset fix, an RF-Kill fix, a fix for powersave when GO
interfaces are present as well as an aggregation session fix (for a
corner case) and a workaround for a firmware design issue - it only
supports a single GTK in D3."

Bringing-up the rear with the Atheros trees, Kalle says:

"Geert Uytterhoeven fixed an ath10k build problem when NO_DMA=y. I added
a missing MAINTAINERS entry for ath10k and updated ath6kl git tree
location."

Along with the above...

Arend van Spriel fixes a brcmfmac WARNING when unplugging the device.

Avinash Patil proves a couple of minor mwifiex fixes relating to P2P mode.

Luciano Coelho updates the MAINTAINERS entry for the wilink drivers.

Stanislaw Gruszka brings an rt2x00 fix for a queue start/stop problem.

Stone Piao fixes another mwifiex problem, a command timeout related to P2P mode.

Tomasz Moń corrects an endian problem in mwifiex.

I'll remind my feeder maintainers to slowdown the patchflow.
Beyond that, please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2013-08-01 12:57:52 -07:00
commit 1f1059fcf0
32 changed files with 203 additions and 116 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
MAINTAINERS
View File

@ -1406,7 +1406,7 @@ ATHEROS ATH6KL WIRELESS DRIVER
M: Kalle Valo <kvalo@qca.qualcomm.com>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ath6kl
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath6kl.git
T: git git://github.com/kvalo/ath.git
S: Supported
F: drivers/net/wireless/ath/ath6kl/
@ -6726,6 +6726,14 @@ T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
F: drivers/media/tuners/qt1010*
QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
M: Kalle Valo <kvalo@qca.qualcomm.com>
L: ath10k@lists.infradead.org
W: http://wireless.kernel.org/en/users/Drivers/ath10k
T: git git://github.com/kvalo/ath.git
S: Supported
F: drivers/net/wireless/ath/ath10k/
QUALCOMM HEXAGON ARCHITECTURE
M: Richard Kuo <rkuo@codeaurora.org>
L: linux-hexagon@vger.kernel.org
@ -8270,7 +8278,7 @@ S: Maintained
F: sound/soc/codecs/twl4030*
TI WILINK WIRELESS DRIVERS
M: Luciano Coelho <coelho@ti.com>
M: Luciano Coelho <luca@coelho.fi>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/wl12xx
W: http://wireless.kernel.org/en/users/Drivers/wl1251

44
drivers/bluetooth/ath3k.c
View File

@ -91,6 +91,10 @@ static struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0489, 0xe04e) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe04d) },
{ USB_DEVICE(0x04c5, 0x1330) },
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x0cf3, 0x3121) },
{ USB_DEVICE(0x0cf3, 0xe003) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@ -128,6 +132,10 @@ static struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
@ -193,24 +201,44 @@ error:
static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
{
int pipe = 0;
int ret, pipe = 0;
char *buf;
buf = kmalloc(sizeof(*buf), GFP_KERNEL);
if (!buf)
return -ENOMEM;
pipe = usb_rcvctrlpipe(udev, 0);
return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
ret = usb_control_msg(udev, pipe, ATH3K_GETSTATE,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
state, 0x01, USB_CTRL_SET_TIMEOUT);
buf, sizeof(*buf), USB_CTRL_SET_TIMEOUT);
*state = *buf;
kfree(buf);
return ret;
}
static int ath3k_get_version(struct usb_device *udev,
struct ath3k_version *version)
{
int pipe = 0;
int ret, pipe = 0;
struct ath3k_version *buf;
const int size = sizeof(*buf);
buf = kmalloc(size, GFP_KERNEL);
if (!buf)
return -ENOMEM;
pipe = usb_rcvctrlpipe(udev, 0);
return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
sizeof(struct ath3k_version),
USB_CTRL_SET_TIMEOUT);
ret = usb_control_msg(udev, pipe, ATH3K_GETVERSION,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
buf, size, USB_CTRL_SET_TIMEOUT);
memcpy(version, buf, size);
kfree(buf);
return ret;
}
static int ath3k_load_fwfile(struct usb_device *udev,

18
drivers/bluetooth/btusb.c
View File

@ -154,6 +154,10 @@ static struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@ -1095,7 +1099,7 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
if (IS_ERR(skb)) {
BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
hdev->name, cmd->opcode, PTR_ERR(skb));
return -PTR_ERR(skb);
return PTR_ERR(skb);
}
/* It ensures that the returned event matches the event data read from
@ -1147,7 +1151,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
if (IS_ERR(skb)) {
BT_ERR("%s sending initial HCI reset command failed (%ld)",
hdev->name, PTR_ERR(skb));
return -PTR_ERR(skb);
return PTR_ERR(skb);
}
kfree_skb(skb);
@ -1161,7 +1165,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
if (IS_ERR(skb)) {
BT_ERR("%s reading Intel fw version command failed (%ld)",
hdev->name, PTR_ERR(skb));
return -PTR_ERR(skb);
return PTR_ERR(skb);
}
if (skb->len != sizeof(*ver)) {
@ -1219,7 +1223,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
release_firmware(fw);
return -PTR_ERR(skb);
return PTR_ERR(skb);
}
if (skb->data[0]) {
@ -1276,7 +1280,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
return -PTR_ERR(skb);
return PTR_ERR(skb);
}
kfree_skb(skb);
@ -1292,7 +1296,7 @@ exit_mfg_disable:
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
return -PTR_ERR(skb);
return PTR_ERR(skb);
}
kfree_skb(skb);
@ -1310,7 +1314,7 @@ exit_mfg_deactivate:
if (IS_ERR(skb)) {
BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
hdev->name, PTR_ERR(skb));
return -PTR_ERR(skb);
return PTR_ERR(skb);
}
kfree_skb(skb);

2
drivers/net/wireless/ath/ath10k/Kconfig
View File

@ -1,6 +1,6 @@
config ATH10K
tristate "Atheros 802.11ac wireless cards support"
depends on MAC80211
depends on MAC80211 && HAS_DMA
select ATH_COMMON
---help---
This module adds support for wireless adapters based on

5
drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
View File

@ -1093,8 +1093,11 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
err = brcmf_fil_cmd_data_set(vif->ifp,
BRCMF_C_DISASSOC, NULL, 0);
if (err)
if (err) {
brcmf_err("WLC_DISASSOC failed (%d)\n", err);
cfg80211_disconnected(vif->wdev.netdev, 0,
NULL, 0, GFP_KERNEL);
}
clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state);
}
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state);

2
drivers/net/wireless/iwlwifi/iwl-prph.h
View File

@ -97,6 +97,8 @@
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
#define APMG_RTC_INT_STT_RFKILL (0x10000000)
/* Device system time */
#define DEVICE_SYSTEM_TIME_REG 0xA0206C

15
drivers/net/wireless/iwlwifi/mvm/d3.c
View File

@ -134,7 +134,7 @@ struct wowlan_key_data {
struct iwl_wowlan_rsc_tsc_params_cmd *rsc_tsc;
struct iwl_wowlan_tkip_params_cmd *tkip;
bool error, use_rsc_tsc, use_tkip;
int gtk_key_idx;
int wep_key_idx;
};
static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw,
@ -188,8 +188,8 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw,
wkc.wep_key.key_offset = 0;
} else {
/* others start at 1 */
data->gtk_key_idx++;
wkc.wep_key.key_offset = data->gtk_key_idx;
data->wep_key_idx++;
wkc.wep_key.key_offset = data->wep_key_idx;
}
ret = iwl_mvm_send_cmd_pdu(mvm, WEP_KEY, CMD_SYNC,
@ -316,8 +316,13 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw,
mvm->ptk_ivlen = key->iv_len;
mvm->ptk_icvlen = key->icv_len;
} else {
data->gtk_key_idx++;
key->hw_key_idx = data->gtk_key_idx;
/*
* firmware only supports TSC/RSC for a single key,
* so if there are multiple keep overwriting them
* with new ones -- this relies on mac80211 doing
* list_add_tail().
*/
key->hw_key_idx = 1;
mvm->gtk_ivlen = key->iv_len;
mvm->gtk_icvlen = key->icv_len;
}

1
drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
View File

@ -69,7 +69,6 @@
/* Scan Commands, Responses, Notifications */
/* Masks for iwl_scan_channel.type flags */
#define SCAN_CHANNEL_TYPE_PASSIVE 0
#define SCAN_CHANNEL_TYPE_ACTIVE BIT(0)
#define SCAN_CHANNEL_NARROW_BAND BIT(22)

42
drivers/net/wireless/iwlwifi/mvm/mac80211.c
View File

@ -511,6 +511,27 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
if (ret)
goto out_unlock;
/*
* TODO: remove this temporary code.
* Currently MVM FW supports power management only on single MAC.
* If new interface added, disable PM on existing interface.
* P2P device is a special case, since it is handled by FW similary to
* scan. If P2P deviced is added, PM remains enabled on existing
* interface.
* Note: the method below does not count the new interface being added
* at this moment.
*/
if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
mvm->vif_count++;
if (mvm->vif_count > 1) {
IWL_DEBUG_MAC80211(mvm,
"Disable power on existing interfaces\n");
ieee80211_iterate_active_interfaces_atomic(
mvm->hw,
IEEE80211_IFACE_ITER_NORMAL,
iwl_mvm_pm_disable_iterator, mvm);
}
/*
* The AP binding flow can be done only after the beacon
* template is configured (which happens only in the mac80211
@ -534,27 +555,6 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
goto out_unlock;
}
/*
* TODO: remove this temporary code.
* Currently MVM FW supports power management only on single MAC.
* If new interface added, disable PM on existing interface.
* P2P device is a special case, since it is handled by FW similary to
* scan. If P2P deviced is added, PM remains enabled on existing
* interface.
* Note: the method below does not count the new interface being added
* at this moment.
*/
if (vif->type != NL80211_IFTYPE_P2P_DEVICE)
mvm->vif_count++;
if (mvm->vif_count > 1) {
IWL_DEBUG_MAC80211(mvm,
"Disable power on existing interfaces\n");
ieee80211_iterate_active_interfaces_atomic(
mvm->hw,
IEEE80211_IFACE_ITER_NORMAL,
iwl_mvm_pm_disable_iterator, mvm);
}
ret = iwl_mvm_mac_ctxt_add(mvm, vif);
if (ret)
goto out_release;

11
drivers/net/wireless/iwlwifi/mvm/scan.c
View File

@ -178,19 +178,12 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd,
struct iwl_scan_channel *chan = (struct iwl_scan_channel *)
(cmd->data + le16_to_cpu(cmd->tx_cmd.len));
int i;
__le32 chan_type_value;
if (req->n_ssids > 0)
chan_type_value = cpu_to_le32(BIT(req->n_ssids) - 1);
else
chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE;
for (i = 0; i < cmd->channel_count; i++) {
chan->channel = cpu_to_le16(req->channels[i]->hw_value);
chan->type = cpu_to_le32(BIT(req->n_ssids) - 1);
if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN)
chan->type = SCAN_CHANNEL_TYPE_PASSIVE;
else
chan->type = chan_type_value;
chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE);
chan->active_dwell = cpu_to_le16(active_dwell);
chan->passive_dwell = cpu_to_le16(passive_dwell);
chan->iteration_count = cpu_to_le16(1);

5
drivers/net/wireless/iwlwifi/mvm/sta.c
View File

@ -915,6 +915,7 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv;
struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid];
u16 txq_id;
enum iwl_mvm_agg_state old_state;
/*
* First set the agg state to OFF to avoid calling
@ -924,13 +925,17 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
txq_id = tid_data->txq_id;
IWL_DEBUG_TX_QUEUES(mvm, "Flush AGG: sta %d tid %d q %d state %d\n",
mvmsta->sta_id, tid, txq_id, tid_data->state);
old_state = tid_data->state;
tid_data->state = IWL_AGG_OFF;
spin_unlock_bh(&mvmsta->lock);
if (old_state >= IWL_AGG_ON) {
if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true))
IWL_ERR(mvm, "Couldn't flush the AGG queue\n");
iwl_trans_txq_disable(mvm->trans, tid_data->txq_id);
}
mvm->queue_to_mac80211[tid_data->txq_id] =
IWL_INVALID_MAC80211_QUEUE;

1
drivers/net/wireless/iwlwifi/pcie/drv.c
View File

@ -130,6 +130,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
{IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423C, 0x1326, iwl5150_abg_cfg)}, /* Half Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */
{IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */

8
drivers/net/wireless/iwlwifi/pcie/rx.c
View File

@ -888,6 +888,14 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
if (hw_rfkill) {
/*
* Clear the interrupt in APMG if the NIC is going down.
* Note that when the NIC exits RFkill (else branch), we
* can't access prph and the NIC will be reset in
* start_hw anyway.
*/
iwl_write_prph(trans, APMG_RTC_INT_STT_REG,
APMG_RTC_INT_STT_RFKILL);
set_bit(STATUS_RFKILL, &trans_pcie->status);
if (test_and_clear_bit(STATUS_HCMD_ACTIVE,
&trans_pcie->status))

5
drivers/net/wireless/iwlwifi/pcie/trans.c
View File

@ -670,6 +670,11 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans)
return err;
}
/* Reset the entire device */
iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
usleep_range(10, 15);
iwl_pcie_apm_init(trans);
/* From now on, the op_mode will be kept updated about RF kill state */

4
drivers/net/wireless/mwifiex/cfg80211.c
View File

@ -1716,9 +1716,9 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
int ret;
if (priv->bss_mode != NL80211_IFTYPE_STATION) {
if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) {
wiphy_err(wiphy,
"%s: reject infra assoc request in non-STA mode\n",
"%s: reject infra assoc request in non-STA role\n",
dev->name);
return -EINVAL;
}

3
drivers/net/wireless/mwifiex/cfp.c
View File

@ -415,7 +415,8 @@ u32 mwifiex_get_supported_rates(struct mwifiex_private *priv, u8 *rates)
u32 k = 0;
struct mwifiex_adapter *adapter = priv->adapter;
if (priv->bss_mode == NL80211_IFTYPE_STATION) {
if (priv->bss_mode == NL80211_IFTYPE_STATION ||
priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
switch (adapter->config_bands) {
case BAND_B:
dev_dbg(adapter->dev, "info: infra band=%d "

6
drivers/net/wireless/mwifiex/join.c
View File

@ -1291,8 +1291,10 @@ int mwifiex_associate(struct mwifiex_private *priv,
{
u8 current_bssid[ETH_ALEN];
/* Return error if the adapter or table entry is not marked as infra */
if ((priv->bss_mode != NL80211_IFTYPE_STATION) ||
/* Return error if the adapter is not STA role or table entry
* is not marked as infra.
*/
if ((GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA) ||
(bss_desc->bss_mode != NL80211_IFTYPE_STATION))
return -1;

4
drivers/net/wireless/mwifiex/sdio.c
View File

@ -1639,8 +1639,8 @@ static int mwifiex_sdio_host_to_card(struct mwifiex_adapter *adapter,
/* Allocate buffer and copy payload */
blk_size = MWIFIEX_SDIO_BLOCK_SIZE;
buf_block_len = (pkt_len + blk_size - 1) / blk_size;
*(u16 *) &payload[0] = (u16) pkt_len;
*(u16 *) &payload[2] = type;
*(__le16 *)&payload[0] = cpu_to_le16((u16)pkt_len);
*(__le16 *)&payload[2] = cpu_to_le16(type);
/*
* This is SDIO specific header

4
drivers/net/wireless/mwifiex/sta_ioctl.c
View File

@ -257,10 +257,10 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss,
goto done;
}
if (priv->bss_mode == NL80211_IFTYPE_STATION) {
if (priv->bss_mode == NL80211_IFTYPE_STATION ||
priv->bss_mode == NL80211_IFTYPE_P2P_CLIENT) {
u8 config_bands;
/* Infra mode */
ret = mwifiex_deauthenticate(priv, NULL);
if (ret)
goto done;

18
drivers/net/wireless/rt2x00/rt2x00queue.c
View File

@ -936,13 +936,8 @@ void rt2x00queue_index_inc(struct queue_entry *entry, enum queue_index index)
spin_unlock_irqrestore(&queue->index_lock, irqflags);
}
void rt2x00queue_pause_queue(struct data_queue *queue)
void rt2x00queue_pause_queue_nocheck(struct data_queue *queue)
{
if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
!test_bit(QUEUE_STARTED, &queue->flags) ||
test_and_set_bit(QUEUE_PAUSED, &queue->flags))
return;
switch (queue->qid) {
case QID_AC_VO:
case QID_AC_VI:
@ -958,6 +953,15 @@ void rt2x00queue_pause_queue(struct data_queue *queue)
break;
}
}
void rt2x00queue_pause_queue(struct data_queue *queue)
{
if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
!test_bit(QUEUE_STARTED, &queue->flags) ||
test_and_set_bit(QUEUE_PAUSED, &queue->flags))
return;
rt2x00queue_pause_queue_nocheck(queue);
}
EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue);
void rt2x00queue_unpause_queue(struct data_queue *queue)
@ -1019,7 +1023,7 @@ void rt2x00queue_stop_queue(struct data_queue *queue)
return;
}
rt2x00queue_pause_queue(queue);
rt2x00queue_pause_queue_nocheck(queue);
queue->rt2x00dev->ops->lib->stop_queue(queue);

2
include/net/nfc/hci.h
View File

@ -59,7 +59,7 @@ struct nfc_hci_ops {
struct nfc_target *target);
int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event,
struct sk_buff *skb);
int (*fw_upload)(struct nfc_hci_dev *hdev, const char *firmware_name);
int (*fw_download)(struct nfc_hci_dev *hdev, const char *firmware_name);
int (*discover_se)(struct nfc_hci_dev *dev);
int (*enable_se)(struct nfc_hci_dev *dev, u32 se_idx);
int (*disable_se)(struct nfc_hci_dev *dev, u32 se_idx);

4
include/net/nfc/nfc.h
View File

@ -68,7 +68,7 @@ struct nfc_ops {
void *cb_context);
int (*tm_send)(struct nfc_dev *dev, struct sk_buff *skb);
int (*check_presence)(struct nfc_dev *dev, struct nfc_target *target);
int (*fw_upload)(struct nfc_dev *dev, const char *firmware_name);
int (*fw_download)(struct nfc_dev *dev, const char *firmware_name);
/* Secure Element API */
int (*discover_se)(struct nfc_dev *dev);
@ -127,7 +127,7 @@ struct nfc_dev {
int targets_generation;
struct device dev;
bool dev_up;
bool fw_upload_in_progress;
bool fw_download_in_progress;
u8 rf_mode;
bool polling;
struct nfc_target *active_target;

6
include/uapi/linux/nfc.h
View File

@ -69,8 +69,8 @@
* starting a poll from a device which has a secure element enabled means
* we want to do SE based card emulation.
* @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element.
* @NFC_CMD_FW_UPLOAD: Request to Load/flash firmware, or event to inform that
* some firmware was loaded
* @NFC_CMD_FW_DOWNLOAD: Request to Load/flash firmware, or event to inform
* that some firmware was loaded
*/
enum nfc_commands {
NFC_CMD_UNSPEC,
@ -94,7 +94,7 @@ enum nfc_commands {
NFC_CMD_DISABLE_SE,
NFC_CMD_LLC_SDREQ,
NFC_EVENT_LLC_SDRES,
NFC_CMD_FW_UPLOAD,
NFC_CMD_FW_DOWNLOAD,
NFC_EVENT_SE_ADDED,
NFC_EVENT_SE_REMOVED,
/* private: internal use only */

26
net/bluetooth/hci_core.c
View File

@ -513,7 +513,10 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt)
hci_setup_event_mask(req);
if (hdev->hci_ver > BLUETOOTH_VER_1_1)
/* AVM Berlin (31), aka "BlueFRITZ!", doesn't support the read
* local supported commands HCI command.
*/
if (hdev->manufacturer != 31 && hdev->hci_ver > BLUETOOTH_VER_1_1)
hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
if (lmp_ssp_capable(hdev)) {
@ -2165,10 +2168,6 @@ int hci_register_dev(struct hci_dev *hdev)
BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
write_lock(&hci_dev_list_lock);
list_add(&hdev->list, &hci_dev_list);
write_unlock(&hci_dev_list_lock);
hdev->workqueue = alloc_workqueue("%s", WQ_HIGHPRI | WQ_UNBOUND |
WQ_MEM_RECLAIM, 1, hdev->name);
if (!hdev->workqueue) {
@ -2203,6 +2202,10 @@ int hci_register_dev(struct hci_dev *hdev)
if (hdev->dev_type != HCI_AMP)
set_bit(HCI_AUTO_OFF, &hdev->dev_flags);
write_lock(&hci_dev_list_lock);
list_add(&hdev->list, &hci_dev_list);
write_unlock(&hci_dev_list_lock);
hci_notify(hdev, HCI_DEV_REG);
hci_dev_hold(hdev);
@ -2215,9 +2218,6 @@ err_wqueue:
destroy_workqueue(hdev->req_workqueue);
err:
ida_simple_remove(&hci_index_ida, hdev->id);
write_lock(&hci_dev_list_lock);
list_del(&hdev->list);
write_unlock(&hci_dev_list_lock);
return error;
}
@ -3399,9 +3399,17 @@ void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status)
*/
if (hdev->sent_cmd) {
req_complete = bt_cb(hdev->sent_cmd)->req.complete;
if (req_complete)
if (req_complete) {
/* We must set the complete callback to NULL to
* avoid calling the callback more than once if
* this function gets called again.
*/
bt_cb(hdev->sent_cmd)->req.complete = NULL;
goto call_complete;
}
}
/* Remove all pending commands belonging to this request */
spin_lock_irqsave(&hdev->cmd_q.lock, flags);

4
net/mac80211/mesh_ps.c
View File

@ -229,6 +229,10 @@ void ieee80211_mps_sta_status_update(struct sta_info *sta)
enum nl80211_mesh_power_mode pm;
bool do_buffer;
/* For non-assoc STA, prevent buffering or frame transmission */
if (sta->sta_state < IEEE80211_STA_ASSOC)
return;
/*
* use peer-specific power mode if peering is established and the
* peer's power mode is known

7
net/mac80211/pm.c
View File

@ -99,10 +99,13 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
}
mutex_unlock(&local->sta_mtx);
/* remove all interfaces */
/* remove all interfaces that were created in the driver */
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
if (!ieee80211_sdata_running(sdata) ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
sdata->vif.type == NL80211_IFTYPE_MONITOR)
continue;
drv_remove_interface(local, sdata);
}

20
net/nfc/core.c
View File

@ -44,7 +44,7 @@ DEFINE_MUTEX(nfc_devlist_mutex);
/* NFC device ID bitmap */
static DEFINE_IDA(nfc_index_ida);
int nfc_fw_upload(struct nfc_dev *dev, const char *firmware_name)
int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name)
{
int rc = 0;
@ -62,28 +62,28 @@ int nfc_fw_upload(struct nfc_dev *dev, const char *firmware_name)
goto error;
}
if (!dev->ops->fw_upload) {
if (!dev->ops->fw_download) {
rc = -EOPNOTSUPP;
goto error;
}
dev->fw_upload_in_progress = true;
rc = dev->ops->fw_upload(dev, firmware_name);
dev->fw_download_in_progress = true;
rc = dev->ops->fw_download(dev, firmware_name);
if (rc)
dev->fw_upload_in_progress = false;
dev->fw_download_in_progress = false;
error:
device_unlock(&dev->dev);
return rc;
}
int nfc_fw_upload_done(struct nfc_dev *dev, const char *firmware_name)
int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name)
{
dev->fw_upload_in_progress = false;
dev->fw_download_in_progress = false;
return nfc_genl_fw_upload_done(dev, firmware_name);
return nfc_genl_fw_download_done(dev, firmware_name);
}
EXPORT_SYMBOL(nfc_fw_upload_done);
EXPORT_SYMBOL(nfc_fw_download_done);
/**
* nfc_dev_up - turn on the NFC device
@ -110,7 +110,7 @@ int nfc_dev_up(struct nfc_dev *dev)
goto error;
}
if (dev->fw_upload_in_progress) {
if (dev->fw_download_in_progress) {
rc = -EBUSY;
goto error;
}

8
net/nfc/hci/core.c
View File

@ -809,14 +809,14 @@ static void nfc_hci_recv_from_llc(struct nfc_hci_dev *hdev, struct sk_buff *skb)
}
}
static int hci_fw_upload(struct nfc_dev *nfc_dev, const char *firmware_name)
static int hci_fw_download(struct nfc_dev *nfc_dev, const char *firmware_name)
{
struct nfc_hci_dev *hdev = nfc_get_drvdata(nfc_dev);
if (!hdev->ops->fw_upload)
if (!hdev->ops->fw_download)
return -ENOTSUPP;
return hdev->ops->fw_upload(hdev, firmware_name);
return hdev->ops->fw_download(hdev, firmware_name);
}
static struct nfc_ops hci_nfc_ops = {
@ -831,7 +831,7 @@ static struct nfc_ops hci_nfc_ops = {
.im_transceive = hci_transceive,
.tm_send = hci_tm_send,
.check_presence = hci_check_presence,
.fw_upload = hci_fw_upload,
.fw_download = hci_fw_download,
.discover_se = hci_discover_se,
.enable_se = hci_enable_se,
.disable_se = hci_disable_se,

1
net/nfc/nci/Kconfig
View File

@ -11,6 +11,7 @@ config NFC_NCI
config NFC_NCI_SPI
depends on NFC_NCI && SPI
select CRC_CCITT
bool "NCI over SPI protocol support"
default n
help

12
net/nfc/netlink.c
View File

@ -1089,7 +1089,7 @@ exit:
return rc;
}
static int nfc_genl_fw_upload(struct sk_buff *skb, struct genl_info *info)
static int nfc_genl_fw_download(struct sk_buff *skb, struct genl_info *info)
{
struct nfc_dev *dev;
int rc;
@ -1108,13 +1108,13 @@ static int nfc_genl_fw_upload(struct sk_buff *skb, struct genl_info *info)
nla_strlcpy(firmware_name, info->attrs[NFC_ATTR_FIRMWARE_NAME],
sizeof(firmware_name));
rc = nfc_fw_upload(dev, firmware_name);
rc = nfc_fw_download(dev, firmware_name);
nfc_put_device(dev);
return rc;
}
int nfc_genl_fw_upload_done(struct nfc_dev *dev, const char *firmware_name)
int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name)
{
struct sk_buff *msg;
void *hdr;
@ -1124,7 +1124,7 @@ int nfc_genl_fw_upload_done(struct nfc_dev *dev, const char *firmware_name)
return -ENOMEM;
hdr = genlmsg_put(msg, 0, 0, &nfc_genl_family, 0,
NFC_CMD_FW_UPLOAD);
NFC_CMD_FW_DOWNLOAD);
if (!hdr)
goto free_msg;
@ -1251,8 +1251,8 @@ static struct genl_ops nfc_genl_ops[] = {
.policy = nfc_genl_policy,
},
{
.cmd = NFC_CMD_FW_UPLOAD,
.doit = nfc_genl_fw_upload,
.cmd = NFC_CMD_FW_DOWNLOAD,
.doit = nfc_genl_fw_download,
.policy = nfc_genl_policy,
},
{

6
net/nfc/nfc.h
View File

@ -123,10 +123,10 @@ static inline void nfc_device_iter_exit(struct class_dev_iter *iter)
class_dev_iter_exit(iter);
}
int nfc_fw_upload(struct nfc_dev *dev, const char *firmware_name);
int nfc_genl_fw_upload_done(struct nfc_dev *dev, const char *firmware_name);
int nfc_fw_download(struct nfc_dev *dev, const char *firmware_name);
int nfc_genl_fw_download_done(struct nfc_dev *dev, const char *firmware_name);
int nfc_fw_upload_done(struct nfc_dev *dev, const char *firmware_name);
int nfc_fw_download_done(struct nfc_dev *dev, const char *firmware_name);
int nfc_dev_up(struct nfc_dev *dev);

5
net/wireless/reg.c
View File

@ -2247,10 +2247,13 @@ int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env)
void wiphy_regulatory_register(struct wiphy *wiphy)
{
struct regulatory_request *lr;
if (!reg_dev_ignore_cell_hint(wiphy))
reg_num_devs_support_basehint++;
wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE);
lr = get_last_request();
wiphy_update_regulatory(wiphy, lr->initiator);
}
void wiphy_regulatory_deregister(struct wiphy *wiphy)