i2c: Add platform driver on top of the new pca-algorithm

Tested on a blackfin.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/i2c/busses/Kconfig

@@ -632,8 +632,8 @@ config I2C_PCA_ISA
 	select I2C_ALGOPCA
 	default n
 	help
-	  This driver supports ISA boards using the Philips PCA 9564
+	  This driver supports ISA boards using the Philips PCA9564
-	  Parallel bus to I2C bus controller
+	  parallel bus to I2C bus controller.
 	  
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-pca-isa.
@@ -643,6 +643,17 @@ config I2C_PCA_ISA
 	  delays when I2C/SMBus chip drivers are loaded (e.g. at boot
 	  time).  If unsure, say N.
 
+config I2C_PCA_PLATFORM
+	tristate "PCA9564 as platform device"
+	select I2C_ALGOPCA
+	default n
+	help
+	  This driver supports a memory mapped Philips PCA9564
+	  parallel bus to I2C bus controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-pca-platform.
+
 config I2C_MV64XXX
 	tristate "Marvell mv64xxx I2C Controller"
 	depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL

drivers/i2c/busses/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
 obj-$(CONFIG_I2C_PASEMI)	+= i2c-pasemi.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
+obj-$(CONFIG_I2C_PCA_PLATFORM)	+= i2c-pca-platform.o
 obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
 obj-$(CONFIG_I2C_PMCMSP)	+= i2c-pmcmsp.o
 obj-$(CONFIG_I2C_PNX)		+= i2c-pnx.o

drivers/i2c/busses/i2c-pca-platform.c

@@ -0,0 +1,298 @@
+/*
+ *  i2c_pca_platform.c
+ *
+ *  Platform driver for the PCA9564 I2C controller.
+ *
+ *  Copyright (C) 2008 Pengutronix
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-algo-pca.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/gpio.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#define res_len(r)		((r)->end - (r)->start + 1)
+
+struct i2c_pca_pf_data {
+	void __iomem			*reg_base;
+	int				irq;	/* if 0, use polling */
+	int				gpio;
+	wait_queue_head_t		wait;
+	struct i2c_adapter		adap;
+	struct i2c_algo_pca_data	algo_data;
+	unsigned long			io_base;
+	unsigned long			io_size;
+};
+
+/* Read/Write functions for different register alignments */
+
+static int i2c_pca_pf_readbyte8(void *pd, int reg)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	return ioread8(i2c->reg_base + reg);
+}
+
+static int i2c_pca_pf_readbyte16(void *pd, int reg)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	return ioread8(i2c->reg_base + reg * 2);
+}
+
+static int i2c_pca_pf_readbyte32(void *pd, int reg)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	return ioread8(i2c->reg_base + reg * 4);
+}
+
+static void i2c_pca_pf_writebyte8(void *pd, int reg, int val)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	iowrite8(val, i2c->reg_base + reg);
+}
+
+static void i2c_pca_pf_writebyte16(void *pd, int reg, int val)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	iowrite8(val, i2c->reg_base + reg * 2);
+}
+
+static void i2c_pca_pf_writebyte32(void *pd, int reg, int val)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	iowrite8(val, i2c->reg_base + reg * 4);
+}
+
+
+static int i2c_pca_pf_waitforcompletion(void *pd)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	int ret = 0;
+
+	if (i2c->irq) {
+		ret = wait_event_interruptible(i2c->wait,
+			i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+			& I2C_PCA_CON_SI);
+	} else {
+		/*
+		 * Do polling...
+		 * XXX: Could get stuck in extreme cases!
+		 *      Maybe add timeout, but using irqs is preferred anyhow.
+		 */
+		while ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON)
+				& I2C_PCA_CON_SI) == 0)
+			udelay(100);
+	}
+
+	return ret;
+}
+
+static void i2c_pca_pf_dummyreset(void *pd)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+	printk(KERN_WARNING "%s: No reset-pin found. Chip may get stuck!\n",
+		i2c->adap.name);
+}
+
+static void i2c_pca_pf_resetchip(void *pd)
+{
+	struct i2c_pca_pf_data *i2c = pd;
+
+	gpio_set_value(i2c->gpio, 0);
+	ndelay(100);
+	gpio_set_value(i2c->gpio, 1);
+}
+
+static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id)
+{
+	struct i2c_pca_pf_data *i2c = dev_id;
+
+	if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0)
+		return IRQ_NONE;
+
+	wake_up_interruptible(&i2c->wait);
+
+	return IRQ_HANDLED;
+}
+
+
+static int __devinit i2c_pca_pf_probe(struct platform_device *pdev)
+{
+	struct i2c_pca_pf_data *i2c;
+	struct resource *res;
+	struct i2c_pca9564_pf_platform_data *platform_data =
+				pdev->dev.platform_data;
+	int ret = 0;
+	int irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	/* If irq is 0, we do polling. */
+
+	if (res == NULL) {
+		ret = -ENODEV;
+		goto e_print;
+	}
+
+	if (!request_mem_region(res->start, res_len(res), res->name)) {
+		ret = -ENOMEM;
+		goto e_print;
+	}
+
+	i2c = kzalloc(sizeof(struct i2c_pca_pf_data), GFP_KERNEL);
+	if (!i2c) {
+		ret = -ENOMEM;
+		goto e_alloc;
+	}
+
+	init_waitqueue_head(&i2c->wait);
+
+	i2c->reg_base = ioremap(res->start, res_len(res));
+	if (!i2c->reg_base) {
+		ret = -EIO;
+		goto e_remap;
+	}
+	i2c->io_base = res->start;
+	i2c->io_size = res_len(res);
+	i2c->irq = irq;
+
+	i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
+	i2c->adap.owner = THIS_MODULE;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name), "PCA9564 at 0x%08lx",
+		(unsigned long) res->start);
+	i2c->adap.algo_data = &i2c->algo_data;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.timeout = platform_data->timeout;
+
+	i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
+	i2c->algo_data.data = i2c;
+
+	switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
+	case IORESOURCE_MEM_32BIT:
+		i2c->algo_data.write_byte = i2c_pca_pf_writebyte32;
+		i2c->algo_data.read_byte = i2c_pca_pf_readbyte32;
+		break;
+	case IORESOURCE_MEM_16BIT:
+		i2c->algo_data.write_byte = i2c_pca_pf_writebyte16;
+		i2c->algo_data.read_byte = i2c_pca_pf_readbyte16;
+		break;
+	case IORESOURCE_MEM_8BIT:
+	default:
+		i2c->algo_data.write_byte = i2c_pca_pf_writebyte8;
+		i2c->algo_data.read_byte = i2c_pca_pf_readbyte8;
+		break;
+	}
+
+	i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
+
+	i2c->gpio = platform_data->gpio;
+	i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
+
+	/* Use gpio_is_valid() when in mainline */
+	if (i2c->gpio > -1) {
+		ret = gpio_request(i2c->gpio, i2c->adap.name);
+		if (ret == 0) {
+			gpio_direction_output(i2c->gpio, 1);
+			i2c->algo_data.reset_chip = i2c_pca_pf_resetchip;
+		} else {
+			printk(KERN_WARNING "%s: Registering gpio failed!\n",
+				i2c->adap.name);
+			i2c->gpio = ret;
+		}
+	}
+
+	if (irq) {
+		ret = request_irq(irq, i2c_pca_pf_handler,
+			IRQF_TRIGGER_FALLING, i2c->adap.name, i2c);
+		if (ret)
+			goto e_reqirq;
+	}
+
+	if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) {
+		ret = -ENODEV;
+		goto e_adapt;
+	}
+
+	platform_set_drvdata(pdev, i2c);
+
+	printk(KERN_INFO "%s registered.\n", i2c->adap.name);
+
+	return 0;
+
+e_adapt:
+	if (irq)
+		free_irq(irq, i2c);
+e_reqirq:
+	if (i2c->gpio > -1)
+		gpio_free(i2c->gpio);
+
+	iounmap(i2c->reg_base);
+e_remap:
+	kfree(i2c);
+e_alloc:
+	release_mem_region(res->start, res_len(res));
+e_print:
+	printk(KERN_ERR "Registering PCA9564 FAILED! (%d)\n", ret);
+	return ret;
+}
+
+static int __devexit i2c_pca_pf_remove(struct platform_device *pdev)
+{
+	struct i2c_pca_pf_data *i2c = platform_get_drvdata(pdev);
+	platform_set_drvdata(pdev, NULL);
+
+	i2c_del_adapter(&i2c->adap);
+
+	if (i2c->irq)
+		free_irq(i2c->irq, i2c);
+
+	if (i2c->gpio > -1)
+		gpio_free(i2c->gpio);
+
+	iounmap(i2c->reg_base);
+	release_mem_region(i2c->io_base, i2c->io_size);
+	kfree(i2c);
+
+	return 0;
+}
+
+static struct platform_driver i2c_pca_pf_driver = {
+	.probe = i2c_pca_pf_probe,
+	.remove = __devexit_p(i2c_pca_pf_remove),
+	.driver = {
+		.name = "i2c-pca-platform",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init i2c_pca_pf_init(void)
+{
+	return platform_driver_register(&i2c_pca_pf_driver);
+}
+
+static void __exit i2c_pca_pf_exit(void)
+{
+	platform_driver_unregister(&i2c_pca_pf_driver);
+}
+
+MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_DESCRIPTION("I2C-PCA9564 platform driver");
+MODULE_LICENSE("GPL");
+
+module_init(i2c_pca_pf_init);
+module_exit(i2c_pca_pf_exit);
+

include/linux/i2c-pca-platform.h

@@ -0,0 +1,12 @@
+#ifndef I2C_PCA9564_PLATFORM_H
+#define I2C_PCA9564_PLATFORM_H
+
+struct i2c_pca9564_pf_platform_data {
+	int gpio;		/* pin to reset chip. driver will work when
+				 * not supplied (negative value), but it
+				 * cannot exit some error conditions then */
+	int i2c_clock_speed;	/* values are defined in linux/i2c-algo-pca.h */
+	int timeout;		/* timeout = this value * 10us */
+};
+
+#endif /* I2C_PCA9564_PLATFORM_H */