mtd: nand: omap: handle gpmc bch[48]

gpmc-nand bch registers are now available in driver,
make use of it to handle bch[48] instead of relying
on gpmc exported functions.

And so nand driver no longer needs gpmc header, remove it.

Signed-off-by: Afzal Mohammed <afzal@ti.com>
This commit is contained in:
Afzal Mohammed 2012-10-04 19:03:06 +05:30
parent 2fdf0c9896
commit 2ef9f3ddec

View File

@ -28,7 +28,6 @@
#endif #endif
#include <plat/dma.h> #include <plat/dma.h>
#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h> #include <linux/platform_data/mtd-nand-omap2.h>
#define DRIVER_NAME "omap2-nand" #define DRIVER_NAME "omap2-nand"
@ -106,6 +105,7 @@
#define CS_MASK 0x7 #define CS_MASK 0x7
#define ENABLE_PREFETCH (0x1 << 7) #define ENABLE_PREFETCH (0x1 << 7)
#define DMA_MPU_MODE_SHIFT 2 #define DMA_MPU_MODE_SHIFT 2
#define ECCSIZE0_SHIFT 12
#define ECCSIZE1_SHIFT 22 #define ECCSIZE1_SHIFT 22
#define ECC1RESULTSIZE 0x1 #define ECC1RESULTSIZE 0x1
#define ECCCLEAR 0x100 #define ECCCLEAR 0x100
@ -1034,19 +1034,45 @@ static int omap_dev_ready(struct mtd_info *mtd)
static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
{ {
int nerrors; int nerrors;
unsigned int dev_width; unsigned int dev_width, nsectors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd); mtd);
struct nand_chip *chip = mtd->priv; struct nand_chip *chip = mtd->priv;
u32 val;
nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4; nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
nsectors = 1;
/* /*
* Program GPMC to perform correction on one 512-byte sector at a time. * Program GPMC to perform correction on one 512-byte sector at a time.
* Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
* gives a slight (5%) performance gain (but requires additional code). * gives a slight (5%) performance gain (but requires additional code).
*/ */
(void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
writel(ECC1, info->reg.gpmc_ecc_control);
/*
* When using BCH, sector size is hardcoded to 512 bytes.
* Here we are using wrapping mode 6 both for reading and writing, with:
* size0 = 0 (no additional protected byte in spare area)
* size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
*/
val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
writel(val, info->reg.gpmc_ecc_size_config);
/* BCH configuration */
val = ((1 << 16) | /* enable BCH */
(((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
(0x06 << 8) | /* wrap mode = 6 */
(dev_width << 7) | /* bus width */
(((nsectors-1) & 0x7) << 4) | /* number of sectors */
(info->gpmc_cs << 1) | /* ECC CS */
(0x1)); /* enable ECC */
writel(val, info->reg.gpmc_ecc_config);
/* clear ecc and enable bits */
writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
} }
/** /**
@ -1060,7 +1086,32 @@ static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
{ {
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd); mtd);
return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code); unsigned long nsectors, val1, val2;
int i;
nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
for (i = 0; i < nsectors; i++) {
/* Read hw-computed remainder */
val1 = readl(info->reg.gpmc_bch_result0[i]);
val2 = readl(info->reg.gpmc_bch_result1[i]);
/*
* Add constant polynomial to remainder, in order to get an ecc
* sequence of 0xFFs for a buffer filled with 0xFFs; and
* left-justify the resulting polynomial.
*/
*ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
*ecc_code++ = 0x13 ^ ((val2 >> 4) & 0xFF);
*ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
*ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
*ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
*ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
*ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
}
return 0;
} }
/** /**
@ -1074,7 +1125,39 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
{ {
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd); mtd);
return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code); unsigned long nsectors, val1, val2, val3, val4;
int i;
nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
for (i = 0; i < nsectors; i++) {
/* Read hw-computed remainder */
val1 = readl(info->reg.gpmc_bch_result0[i]);
val2 = readl(info->reg.gpmc_bch_result1[i]);
val3 = readl(info->reg.gpmc_bch_result2[i]);
val4 = readl(info->reg.gpmc_bch_result3[i]);
/*
* Add constant polynomial to remainder, in order to get an ecc
* sequence of 0xFFs for a buffer filled with 0xFFs.
*/
*ecc_code++ = 0xef ^ (val4 & 0xFF);
*ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
*ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
*ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
*ecc_code++ = 0xed ^ (val3 & 0xFF);
*ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
*ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
*ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
*ecc_code++ = 0x97 ^ (val2 & 0xFF);
*ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
*ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
*ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
*ecc_code++ = 0xb5 ^ (val1 & 0xFF);
}
return 0;
} }
/** /**
@ -1130,7 +1213,7 @@ static void omap3_free_bch(struct mtd_info *mtd)
*/ */
static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
{ {
int ret, max_errors; int max_errors;
struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
mtd); mtd);
#ifdef CONFIG_MTD_NAND_OMAP_BCH8 #ifdef CONFIG_MTD_NAND_OMAP_BCH8
@ -1147,11 +1230,6 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
goto fail; goto fail;
} }
/* initialize GPMC BCH engine */
ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
if (ret)
goto fail;
/* software bch library is only used to detect and locate errors */ /* software bch library is only used to detect and locate errors */
info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */); info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
if (!info->bch) if (!info->bch)