FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-12 10:55:08 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Browse Source
This commit is contained in:
David S. Miller 2019-03-27 17:37:58 -07:00
commit 356d71e00d
926 changed files with 15171 additions and 7606 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Documentation/ABI/obsolete/sysfs-class-dax Normal file
View File

@ -0,0 +1,22 @@
What: /sys/class/dax/
Date: May, 2016
KernelVersion: v4.7
Contact: linux-nvdimm@lists.01.org
Description: Device DAX is the device-centric analogue of Filesystem
DAX (CONFIG_FS_DAX). It allows memory ranges to be
allocated and mapped without need of an intervening file
system. Device DAX is strict, precise and predictable.
Specifically this interface:
1/ Guarantees fault granularity with respect to a given
page size (pte, pmd, or pud) set at configuration time.
2/ Enforces deterministic behavior by being strict about
what fault scenarios are supported.
The /sys/class/dax/ interface enumerates all the
device-dax instances in the system. The ABI is
deprecated and will be removed after 2020. It is
replaced with the DAX bus interface /sys/bus/dax/ where
device-dax instances can be found under
/sys/bus/dax/devices/

7
Documentation/ABI/testing/sysfs-fs-f2fs
View File

@ -86,6 +86,13 @@ Description:
The unit size is one block, now only support configuring in range
of [1, 512].
What: /sys/fs/f2fs/<disk>/umount_discard_timeout
Date: January 2019
Contact: "Jaegeuk Kim" <jaegeuk@kernel.org>
Description:
Set timeout to issue discard commands during umount.
Default: 5 secs
What: /sys/fs/f2fs/<disk>/max_victim_search
Date: January 2014
Contact: "Jaegeuk Kim" <jaegeuk.kim@samsung.com>

3
Documentation/admin-guide/md.rst
View File

@ -756,3 +756,6 @@ These currently include:
The cache mode for raid5. raid5 could include an extra disk for
caching. The mode can be "write-throuth" and "write-back". The
default is "write-through".
ppl_write_hint
NVMe stream ID to be set for each PPL write request.

4
Documentation/arm/kernel_mode_neon.txt
View File

@ -6,7 +6,7 @@ TL;DR summary
* Use only NEON instructions, or VFP instructions that don't rely on support
code
* Isolate your NEON code in a separate compilation unit, and compile it with
'-mfpu=neon -mfloat-abi=softfp'
'-march=armv7-a -mfpu=neon -mfloat-abi=softfp'
* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
NEON code
* Don't sleep in your NEON code, and be aware that it will be executed with
@ -87,7 +87,7 @@ instructions appearing in unexpected places if no special care is taken.
Therefore, the recommended and only supported way of using NEON/VFP in the
kernel is by adhering to the following rules:
* isolate the NEON code in a separate compilation unit and compile it with
'-mfpu=neon -mfloat-abi=softfp';
'-march=armv7-a -mfpu=neon -mfloat-abi=softfp';
* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
into the unit containing the NEON code from a compilation unit which is *not*
built with the GCC flag '-mfpu=neon' set.

2
Documentation/devicetree/bindings/display/ssd1307fb.txt
View File

@ -36,7 +36,6 @@ ssd1307: oled@3c {
reg = <0x3c>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>;
reset-active-low;
};
ssd1306: oled@3c {
@ -44,7 +43,6 @@ ssd1306: oled@3c {
reg = <0x3c>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>;
reset-active-low;
solomon,com-lrremap;
solomon,com-invdir;
solomon,com-offset = <32>;

1
Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
View File

@ -16,6 +16,7 @@ Required properties:
- "renesas,irqc-r8a7793" (R-Car M2-N)
- "renesas,irqc-r8a7794" (R-Car E2)
- "renesas,intc-ex-r8a774a1" (RZ/G2M)
- "renesas,intc-ex-r8a774c0" (RZ/G2E)
- "renesas,intc-ex-r8a7795" (R-Car H3)
- "renesas,intc-ex-r8a7796" (R-Car M3-W)
- "renesas,intc-ex-r8a77965" (R-Car M3-N)

73
Documentation/devicetree/bindings/net/dsa/qca8k.txt
View File

@ -12,10 +12,15 @@ Required properties:
Subnodes:
The integrated switch subnode should be specified according to the binding
described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of
port and PHY id, each subnode describing a port needs to have a valid phandle
referencing the internal PHY connected to it. The CPU port of this switch is
always port 0.
described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
mdio-bus each subnode describing a port needs to have a valid phandle
referencing the internal PHY it is connected to. This is because there's no
N:N mapping of port and PHY id.
Don't use mixed external and internal mdio-bus configurations, as this is
not supported by the hardware.
The CPU port of this switch is always port 0.
A CPU port node has the following optional node:
@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties:
- 'full-duplex' (boolean, optional), to indicate that full duplex is
used. When absent, half duplex is assumed.
Example:
Examples:
for the external mdio-bus configuration:
&mdio0 {
phy_port1: phy@0 {
@ -55,12 +61,12 @@ Example:
reg = <4>;
};
switch0@0 {
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
@ -108,3 +114,56 @@ Example:
};
};
};
for the internal master mdio-bus configuration:
&mdio0 {
switch@10 {
compatible = "qca,qca8337";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "cpu";
ethernet = <&gmac1>;
phy-mode = "rgmii";
fixed-link {
speed = 1000;
full-duplex;
};
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@5 {
reg = <5>;
label = "wan";
};
};
};
};

3
Documentation/filesystems/cifs/TODO
View File

@ -111,7 +111,8 @@ negotiated size) and send larger write sizes to modern servers.
5) Continue to extend the smb3 "buildbot" which does automated xfstesting
against Windows, Samba and Azure currently - to add additional tests and
to allow the buildbot to execute the tests faster.
to allow the buildbot to execute the tests faster. The URL for the
buildbot is: http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com
6) Address various coverity warnings (most are not bugs per-se, but
the more warnings are addressed, the easier it is to spot real

34
Documentation/filesystems/cifs/cifs.txt
View File

@ -1,16 +1,21 @@
This is the client VFS module for the SMB3 NAS protocol as well
older dialects such as the Common Internet File System (CIFS)
as for older dialects such as the Common Internet File System (CIFS)
protocol which was the successor to the Server Message Block
(SMB) protocol, the native file sharing mechanism for most early
PC operating systems. New and improved versions of CIFS are now
called SMB2 and SMB3. These dialects are also supported by the
CIFS VFS module. CIFS is fully supported by network
file servers such as Windows 2000, 2003, 2008, 2012 and 2016
as well by Samba (which provides excellent CIFS
server support for Linux and many other operating systems), Apple
systems, as well as most Network Attached Storage vendors, so
this network filesystem client can mount to a wide variety of
servers.
called SMB2 and SMB3. Use of SMB3 (and later, including SMB3.1.1)
is strongly preferred over using older dialects like CIFS due to
security reaasons. All modern dialects, including the most recent,
SMB3.1.1 are supported by the CIFS VFS module. The SMB3 protocol
is implemented and supported by all major file servers
such as all modern versions of Windows (including Windows 2016
Server), as well as by Samba (which provides excellent
CIFS/SMB2/SMB3 server support and tools for Linux and many other
operating systems). Apple systems also support SMB3 well, as
do most Network Attached Storage vendors, so this network
filesystem client can mount to a wide variety of systems.
It also supports mounting to the cloud (for example
Microsoft Azure), including the necessary security features.
The intent of this module is to provide the most advanced network
file system function for SMB3 compliant servers, including advanced
@ -24,12 +29,17 @@
cluster file systems for fileserving in some Linux to Linux environments,
not just in Linux to Windows (or Linux to Mac) environments.
This filesystem has an mount utility (mount.cifs) that can be obtained from
This filesystem has a mount utility (mount.cifs) and various user space
tools (including smbinfo and setcifsacl) that can be obtained from
https://ftp.samba.org/pub/linux-cifs/cifs-utils/
https://git.samba.org/?p=cifs-utils.git
or
git://git.samba.org/cifs-utils.git
It must be installed in the directory with the other mount helpers.
mount.cifs should be installed in the directory with the other mount helpers.
For more information on the module see the project wiki page at
https://wiki.samba.org/index.php/LinuxCIFS
and
https://wiki.samba.org/index.php/LinuxCIFS_utils

2
Documentation/filesystems/f2fs.txt
View File

@ -126,6 +126,8 @@ disable_ext_identify Disable the extension list configured by mkfs, so f2fs
does not aware of cold files such as media files.
inline_xattr Enable the inline xattrs feature.
noinline_xattr Disable the inline xattrs feature.
inline_xattr_size=%u Support configuring inline xattr size, it depends on
flexible inline xattr feature.
inline_data Enable the inline data feature: New created small(<~3.4k)
files can be written into inode block.
inline_dentry Enable the inline dir feature: data in new created

2
Documentation/kbuild/makefiles.txt
View File

@ -1274,7 +1274,7 @@ See subsequent chapter for the syntax of the Kbuild file.
--- 7.4 mandatory-y
mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild.asm
mandatory-y is essentially used by include/(uapi/)asm-generic/Kbuild
to define the minimum set of ASM headers that all architectures must have.
This works like optional generic-y. If a mandatory header is missing

8
Documentation/networking/nf_flowtable.txt
View File

@ -44,10 +44,10 @@ including the Netfilter hooks and the flowtable fastpath bypass.
/ \ / \ |Routing | / \
--> ingress ---> prerouting ---> |decision| | postrouting |--> neigh_xmit
\_________/ \__________/ ---------- \____________/ ^
| ^ | | ^ |
flowtable | | ____\/___ | |
| | | / \ | |
__\/___ | --------->| forward |------------ |
| ^ | ^ |
flowtable | ____\/___ | |
| | / \ | |
__\/___ | | forward |------------ |
|-----| | \_________/ |
|-----| | 'flow offload' rule |
|-----| | adds entry to |

17
Documentation/virtual/kvm/api.txt
View File

@ -45,6 +45,23 @@ the API. The only supported use is one virtual machine per process,
and one vcpu per thread.
It is important to note that althought VM ioctls may only be issued from
the process that created the VM, a VM's lifecycle is associated with its
file descriptor, not its creator (process). In other words, the VM and
its resources, *including the associated address space*, are not freed
until the last reference to the VM's file descriptor has been released.
For example, if fork() is issued after ioctl(KVM_CREATE_VM), the VM will
not be freed until both the parent (original) process and its child have
put their references to the VM's file descriptor.
Because a VM's resources are not freed until the last reference to its
file descriptor is released, creating additional references to a VM via
via fork(), dup(), etc... without careful consideration is strongly
discouraged and may have unwanted side effects, e.g. memory allocated
by and on behalf of the VM's process may not be freed/unaccounted when
the VM is shut down.
3. Extensions
-------------

37
Documentation/virtual/kvm/halt-polling.txt
View File

@ -53,7 +53,8 @@ the global max polling interval then the polling interval can be increased in
the hope that next time during the longer polling interval the wake up source
will be received while the host is polling and the latency benefits will be
received. The polling interval is grown in the function grow_halt_poll_ns() and
is multiplied by the module parameter halt_poll_ns_grow.
is multiplied by the module parameters halt_poll_ns_grow and
halt_poll_ns_grow_start.
In the event that the total block time was greater than the global max polling
interval then the host will never poll for long enough (limited by the global
@ -80,22 +81,30 @@ shrunk. These variables are defined in include/linux/kvm_host.h and as module
parameters in virt/kvm/kvm_main.c, or arch/powerpc/kvm/book3s_hv.c in the
powerpc kvm-hv case.
Module Parameter | Description | Default Value
Module Parameter | Description | Default Value
--------------------------------------------------------------------------------
halt_poll_ns | The global max polling interval | KVM_HALT_POLL_NS_DEFAULT
| which defines the ceiling value |
| of the polling interval for | (per arch value)
| each vcpu. |
halt_poll_ns | The global max polling | KVM_HALT_POLL_NS_DEFAULT
| interval which defines |
| the ceiling value of the |
| polling interval for | (per arch value)
| each vcpu. |
--------------------------------------------------------------------------------
halt_poll_ns_grow | The value by which the halt | 2
| polling interval is multiplied |
| in the grow_halt_poll_ns() |
| function. |
halt_poll_ns_grow | The value by which the | 2
| halt polling interval is |
| multiplied in the |
| grow_halt_poll_ns() |
| function. |
--------------------------------------------------------------------------------
halt_poll_ns_shrink | The value by which the halt | 0
| polling interval is divided in |
| the shrink_halt_poll_ns() |
| function. |
halt_poll_ns_grow_start | The initial value to grow | 10000
| to from zero in the |
| grow_halt_poll_ns() |
| function. |
--------------------------------------------------------------------------------
halt_poll_ns_shrink | The value by which the | 0
| halt polling interval is |
| divided in the |
| shrink_halt_poll_ns() |
| function. |
--------------------------------------------------------------------------------
These module parameters can be set from the debugfs files in:

41
Documentation/virtual/kvm/mmu.txt
View File

@ -224,10 +224,6 @@ Shadow pages contain the following information:
A bitmap indicating which sptes in spt point (directly or indirectly) at
pages that may be unsynchronized. Used to quickly locate all unsychronized
pages reachable from a given page.
mmu_valid_gen:
Generation number of the page. It is compared with kvm->arch.mmu_valid_gen
during hash table lookup, and used to skip invalidated shadow pages (see
"Zapping all pages" below.)
clear_spte_count:
Only present on 32-bit hosts, where a 64-bit spte cannot be written
atomically. The reader uses this while running out of the MMU lock
@ -402,27 +398,6 @@ causes its disallow_lpage to be incremented, thus preventing instantiation of
a large spte. The frames at the end of an unaligned memory slot have
artificially inflated ->disallow_lpages so they can never be instantiated.
Zapping all pages (page generation count)
=========================================
For the large memory guests, walking and zapping all pages is really slow
(because there are a lot of pages), and also blocks memory accesses of
all VCPUs because it needs to hold the MMU lock.
To make it be more scalable, kvm maintains a global generation number
which is stored in kvm->arch.mmu_valid_gen. Every shadow page stores
the current global generation-number into sp->mmu_valid_gen when it
is created. Pages with a mismatching generation number are "obsolete".
When KVM need zap all shadow pages sptes, it just simply increases the global
generation-number then reload root shadow pages on all vcpus. As the VCPUs
create new shadow page tables, the old pages are not used because of the
mismatching generation number.
KVM then walks through all pages and zaps obsolete pages. While the zap
operation needs to take the MMU lock, the lock can be released periodically
so that the VCPUs can make progress.
Fast invalidation of MMIO sptes
===============================
@ -435,8 +410,7 @@ shadow pages, and is made more scalable with a similar technique.
MMIO sptes have a few spare bits, which are used to store a
generation number. The global generation number is stored in
kvm_memslots(kvm)->generation, and increased whenever guest memory info
changes. This generation number is distinct from the one described in
the previous section.
changes.
When KVM finds an MMIO spte, it checks the generation number of the spte.
If the generation number of the spte does not equal the global generation
@ -452,13 +426,16 @@ stored into the MMIO spte. Thus, the MMIO spte might be created based on
out-of-date information, but with an up-to-date generation number.
To avoid this, the generation number is incremented again after synchronize_srcu
returns; thus, the low bit of kvm_memslots(kvm)->generation is only 1 during a
returns; thus, bit 63 of kvm_memslots(kvm)->generation set to 1 only during a
memslot update, while some SRCU readers might be using the old copy. We do not
want to use an MMIO sptes created with an odd generation number, and we can do
this without losing a bit in the MMIO spte. The low bit of the generation
is not stored in MMIO spte, and presumed zero when it is extracted out of the
spte. If KVM is unlucky and creates an MMIO spte while the low bit is 1,
the next access to the spte will always be a cache miss.
this without losing a bit in the MMIO spte. The "update in-progress" bit of the
generation is not stored in MMIO spte, and is so is implicitly zero when the
generation is extracted out of the spte. If KVM is unlucky and creates an MMIO
spte while an update is in-progress, the next access to the spte will always be
a cache miss. For example, a subsequent access during the update window will
miss due to the in-progress flag diverging, while an access after the update
window closes will have a higher generation number (as compared to the spte).
Further reading

31
MAINTAINERS
View File

@ -5278,7 +5278,7 @@ DRM DRIVERS FOR VIVANTE GPU IP
M: Lucas Stach <l.stach@pengutronix.de>
R: Russell King <linux+etnaviv@armlinux.org.uk>
R: Christian Gmeiner <christian.gmeiner@gmail.com>
L: etnaviv@lists.freedesktop.org
L: etnaviv@lists.freedesktop.org (moderated for non-subscribers)
L: dri-devel@lists.freedesktop.org
S: Maintained
F: drivers/gpu/drm/etnaviv/
@ -8096,6 +8096,16 @@ F: include/linux/iommu.h
F: include/linux/of_iommu.h
F: include/linux/iova.h
IO_URING
M: Jens Axboe <axboe@kernel.dk>
L: linux-block@vger.kernel.org
L: linux-fsdevel@vger.kernel.org
T: git git://git.kernel.dk/linux-block
T: git git://git.kernel.dk/liburing
S: Maintained
F: fs/io_uring.c
F: include/uapi/linux/io_uring.h
IP MASQUERADING
M: Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
S: Maintained
@ -8461,6 +8471,7 @@ F: include/linux/kvm*
F: include/kvm/iodev.h
F: virt/kvm/*
F: tools/kvm/
F: tools/testing/selftests/kvm/
KERNEL VIRTUAL MACHINE FOR AMD-V (KVM/amd)
M: Joerg Roedel <joro@8bytes.org>
@ -8470,29 +8481,25 @@ S: Maintained
F: arch/x86/include/asm/svm.h
F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE FOR ARM (KVM/arm)
KERNEL VIRTUAL MACHINE FOR ARM/ARM64 (KVM/arm, KVM/arm64)
M: Christoffer Dall <christoffer.dall@arm.com>
M: Marc Zyngier <marc.zyngier@arm.com>
R: James Morse <james.morse@arm.com>
R: Julien Thierry <julien.thierry@arm.com>
R: Suzuki K Pouloze <suzuki.poulose@arm.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: kvmarm@lists.cs.columbia.edu
W: http://systems.cs.columbia.edu/projects/kvm-arm
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm.git
S: Supported
S: Maintained
F: arch/arm/include/uapi/asm/kvm*
F: arch/arm/include/asm/kvm*
F: arch/arm/kvm/
F: virt/kvm/arm/
F: include/kvm/arm_*
KERNEL VIRTUAL MACHINE FOR ARM64 (KVM/arm64)
M: Christoffer Dall <christoffer.dall@arm.com>
M: Marc Zyngier <marc.zyngier@arm.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: kvmarm@lists.cs.columbia.edu
S: Maintained
F: arch/arm64/include/uapi/asm/kvm*
F: arch/arm64/include/asm/kvm*
F: arch/arm64/kvm/
F: virt/kvm/arm/
F: include/kvm/arm_*
KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
M: James Hogan <jhogan@kernel.org>

22
Makefile
View File

@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 0
PATCHLEVEL = 1
SUBLEVEL = 0
EXTRAVERSION =
EXTRAVERSION = -rc2
NAME = Shy Crocodile
# *DOCUMENTATION*
@ -31,6 +31,16 @@ _all:
# descending is started. They are now explicitly listed as the
# prepare rule.
# Ugly workaround for Debian make-kpkg:
# make-kpkg directly includes the top Makefile of Linux kernel. In such a case,
# skip sub-make to support debian_* targets in ruleset/kernel_version.mk, but
# displays warning to discourage such abusage.
ifneq ($(word 2, $(MAKEFILE_LIST)),)
$(warning Do not include top Makefile of Linux Kernel)
sub-make-done := 1
MAKEFLAGS += -rR
endif
ifneq ($(sub-make-done),1)
# Do not use make's built-in rules and variables
@ -402,7 +412,7 @@ CHECK = sparse
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
NOSTDINC_FLAGS =
NOSTDINC_FLAGS :=
CFLAGS_MODULE =
AFLAGS_MODULE =
LDFLAGS_MODULE =
@ -1088,9 +1098,11 @@ asm-generic := -f $(srctree)/scripts/Makefile.asm-generic obj
PHONY += asm-generic uapi-asm-generic
asm-generic: uapi-asm-generic
$(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm
$(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/asm \
generic=include/asm-generic
uapi-asm-generic:
$(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm
$(Q)$(MAKE) $(asm-generic)=arch/$(SRCARCH)/include/generated/uapi/asm \
generic=include/uapi/asm-generic
PHONY += prepare-objtool
prepare-objtool: $(objtool_target)

2
arch/alpha/include/uapi/asm/Kbuild
View File

@ -1,3 +1 @@
include include/uapi/asm-generic/Kbuild.asm
generated-y += unistd_32.h

21
arch/arc/Kconfig
View File

@ -144,11 +144,11 @@ config ARC_CPU_770
Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
This core has a bunch of cool new features:
-MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
Shared Address Spaces (for sharing TLB entries in MMU)
Shared Address Spaces (for sharing TLB entries in MMU)
-Caches: New Prog Model, Region Flush
-Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
endif #ISA_ARCOMPACT
endif #ISA_ARCOMPACT
config ARC_CPU_HS
bool "ARC-HS"
@ -198,7 +198,7 @@ config ARC_SMP_HALT_ON_RESET
at designated entry point. For other case, all jump to common
entry point and spin wait for Master's signal.
endif #SMP
endif #SMP
config ARC_MCIP
bool "ARConnect Multicore IP (MCIP) Support "
@ -249,7 +249,7 @@ config ARC_CACHE_VIPT_ALIASING
bool "Support VIPT Aliasing D$"
depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
endif #ARC_CACHE
endif #ARC_CACHE
config ARC_HAS_ICCM
bool "Use ICCM"
@ -370,7 +370,7 @@ config ARC_FPU_SAVE_RESTORE
based on actual usage of FPU by a task. Thus our implemn does
this for all tasks in system.
endif #ISA_ARCOMPACT
endif #ISA_ARCOMPACT
config ARC_CANT_LLSC
def_bool n
@ -386,6 +386,15 @@ config ARC_HAS_SWAPE
if ISA_ARCV2
config ARC_USE_UNALIGNED_MEM_ACCESS
bool "Enable unaligned access in HW"
default y
select HAVE_EFFICIENT_UNALIGNED_ACCESS
help
The ARC HS architecture supports unaligned memory access
which is disabled by default. Enable unaligned access in
hardware and use software to use it
config ARC_HAS_LL64
bool "Insn: 64bit LDD/STD"
help
@ -414,7 +423,7 @@ config ARC_IRQ_NO_AUTOSAVE
This is programmable and can be optionally disabled in which case
software INTERRUPT_PROLOGUE/EPILGUE do the needed work
endif # ISA_ARCV2
endif # ISA_ARCV2
endmenu # "ARC CPU Configuration"

6
arch/arc/Makefile
View File

@ -28,6 +28,12 @@ cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
ifdef CONFIG_ISA_ARCV2
ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
cflags-y += -munaligned-access
else
cflags-y += -mno-unaligned-access
endif
ifndef CONFIG_ARC_HAS_LL64
cflags-y += -mno-ll64
endif

58
arch/arc/boot/dts/abilis_tb100.dtsi
View File

@ -38,7 +38,7 @@
clock-div = <6>;
};
iomux: iomux@FF10601c {
iomux: iomux@ff10601c {
/* Port 1 */
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
abilis,function = "mis0";
@ -162,182 +162,182 @@
};
};
gpioa: gpio@FF140000 {
gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF140000 0x1000>;
reg = <0xff140000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioa";
};
gpiob: gpio@FF141000 {
gpiob: gpio@ff141000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF141000 0x1000>;
reg = <0xff141000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiob";
};
gpioc: gpio@FF142000 {
gpioc: gpio@ff142000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF142000 0x1000>;
reg = <0xff142000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioc";
};
gpiod: gpio@FF143000 {
gpiod: gpio@ff143000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF143000 0x1000>;
reg = <0xff143000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiod";
};
gpioe: gpio@FF144000 {
gpioe: gpio@ff144000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF144000 0x1000>;
reg = <0xff144000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioe";
};
gpiof: gpio@FF145000 {
gpiof: gpio@ff145000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF145000 0x1000>;
reg = <0xff145000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiof";
};
gpiog: gpio@FF146000 {
gpiog: gpio@ff146000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF146000 0x1000>;
reg = <0xff146000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiog";
};
gpioh: gpio@FF147000 {
gpioh: gpio@ff147000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF147000 0x1000>;
reg = <0xff147000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioh";
};
gpioi: gpio@FF148000 {
gpioi: gpio@ff148000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF148000 0x1000>;
reg = <0xff148000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <12>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioi";
};
gpioj: gpio@FF149000 {
gpioj: gpio@ff149000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF149000 0x1000>;
reg = <0xff149000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <32>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioj";
};
gpiok: gpio@FF14a000 {
gpiok: gpio@ff14a000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF14A000 0x1000>;
reg = <0xff14a000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <22>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiok";
};
gpiol: gpio@FF14b000 {
gpiol: gpio@ff14b000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF14B000 0x1000>;
reg = <0xff14b000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiol";
};
gpiom: gpio@FF14c000 {
gpiom: gpio@ff14c000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF14C000 0x1000>;
reg = <0xff14c000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiom";
};
gpion: gpio@FF14d000 {
gpion: gpio@ff14d000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF14D000 0x1000>;
reg = <0xff14d000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <5>;

14
arch/arc/boot/dts/abilis_tb100_dvk.dts
View File

@ -37,27 +37,27 @@
};
soc100 {
uart@FF100000 {
uart@ff100000 {
pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
ethernet@FE100000 {
ethernet@fe100000 {
phy-mode = "rgmii";
};
i2c0: i2c@FF120000 {
i2c0: i2c@ff120000 {
i2c-sda-hold-time-ns = <432>;
};
i2c1: i2c@FF121000 {
i2c1: i2c@ff121000 {
i2c-sda-hold-time-ns = <432>;
};
i2c2: i2c@FF122000 {
i2c2: i2c@ff122000 {
i2c-sda-hold-time-ns = <432>;
};
i2c3: i2c@FF123000 {
i2c3: i2c@ff123000 {
i2c-sda-hold-time-ns = <432>;
};
i2c4: i2c@FF124000 {
i2c4: i2c@ff124000 {
i2c-sda-hold-time-ns = <432>;
};

58
arch/arc/boot/dts/abilis_tb101.dtsi
View File

@ -38,7 +38,7 @@
clock-div = <6>;
};
iomux: iomux@FF10601c {
iomux: iomux@ff10601c {
/* Port 1 */
pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */
abilis,function = "mis0";
@ -171,182 +171,182 @@
};
};
gpioa: gpio@FF140000 {
gpioa: gpio@ff140000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF140000 0x1000>;
reg = <0xff140000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioa";
};
gpiob: gpio@FF141000 {
gpiob: gpio@ff141000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF141000 0x1000>;
reg = <0xff141000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiob";
};
gpioc: gpio@FF142000 {
gpioc: gpio@ff142000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF142000 0x1000>;
reg = <0xff142000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioc";
};
gpiod: gpio@FF143000 {
gpiod: gpio@ff143000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF143000 0x1000>;
reg = <0xff143000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiod";
};
gpioe: gpio@FF144000 {
gpioe: gpio@ff144000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF144000 0x1000>;
reg = <0xff144000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioe";
};
gpiof: gpio@FF145000 {
gpiof: gpio@ff145000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF145000 0x1000>;
reg = <0xff145000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiof";
};
gpiog: gpio@FF146000 {
gpiog: gpio@ff146000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF146000 0x1000>;
reg = <0xff146000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <3>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiog";
};
gpioh: gpio@FF147000 {
gpioh: gpio@ff147000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF147000 0x1000>;
reg = <0xff147000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <2>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioh";
};
gpioi: gpio@FF148000 {
gpioi: gpio@ff148000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF148000 0x1000>;
reg = <0xff148000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <12>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioi";
};
gpioj: gpio@FF149000 {
gpioj: gpio@ff149000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF149000 0x1000>;
reg = <0xff149000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <32>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpioj";
};
gpiok: gpio@FF14a000 {
gpiok: gpio@ff14a000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF14A000 0x1000>;
reg = <0xff14a000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <22>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiok";
};
gpiol: gpio@FF14b000 {
gpiol: gpio@ff14b000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF14B000 0x1000>;
reg = <0xff14b000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiol";
};
gpiom: gpio@FF14c000 {
gpiom: gpio@ff14c000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF14C000 0x1000>;
reg = <0xff14c000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <4>;
gpio-ranges = <&iomux 0 0 0>;
gpio-ranges-group-names = "gpiom";
};
gpion: gpio@FF14d000 {
gpion: gpio@ff14d000 {
compatible = "abilis,tb10x-gpio";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <27 2>;
reg = <0xFF14D000 0x1000>;
reg = <0xff14d000 0x1000>;
gpio-controller;
#gpio-cells = <2>;
abilis,ngpio = <5>;

14
arch/arc/boot/dts/abilis_tb101_dvk.dts
View File

@ -37,27 +37,27 @@
};
soc100 {
uart@FF100000 {
uart@ff100000 {
pinctrl-names = "default";
pinctrl-0 = <&pctl_uart0>;
};
ethernet@FE100000 {
ethernet@fe100000 {
phy-mode = "rgmii";
};
i2c0: i2c@FF120000 {
i2c0: i2c@ff120000 {
i2c-sda-hold-time-ns = <432>;
};
i2c1: i2c@FF121000 {
i2c1: i2c@ff121000 {
i2c-sda-hold-time-ns = <432>;
};
i2c2: i2c@FF122000 {
i2c2: i2c@ff122000 {
i2c-sda-hold-time-ns = <432>;
};
i2c3: i2c@FF123000 {
i2c3: i2c@ff123000 {
i2c-sda-hold-time-ns = <432>;
};
i2c4: i2c@FF124000 {
i2c4: i2c@ff124000 {
i2c-sda-hold-time-ns = <432>;
};

60
arch/arc/boot/dts/abilis_tb10x.dtsi
View File

@ -54,7 +54,7 @@
#size-cells = <1>;
device_type = "soc";
ranges = <0xfe000000 0xfe000000 0x02000000
0x000F0000 0x000F0000 0x00010000>;
0x000f0000 0x000f0000 0x00010000>;
compatible = "abilis,tb10x", "simple-bus";
pll0: oscillator {
@ -75,10 +75,10 @@
clock-output-names = "ahb_clk";
};
iomux: iomux@FF10601c {
iomux: iomux@ff10601c {
compatible = "abilis,tb10x-iomux";
#gpio-range-cells = <3>;
reg = <0xFF10601c 0x4>;
reg = <0xff10601c 0x4>;
};
intc: interrupt-controller {
@ -88,7 +88,7 @@
};
tb10x_ictl: pic@fe002000 {
compatible = "abilis,tb10x-ictl";
reg = <0xFE002000 0x20>;
reg = <0xfe002000 0x20>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
@ -96,27 +96,27 @@
20 21 22 23 24 25 26 27 28 29 30 31>;
};
uart@FF100000 {
uart@ff100000 {
compatible = "snps,dw-apb-uart";
reg = <0xFF100000 0x100>;
reg = <0xff100000 0x100>;
clock-frequency = <166666666>;
interrupts = <25 8>;
reg-shift = <2>;
reg-io-width = <4>;
interrupt-parent = <&tb10x_ictl>;
};
ethernet@FE100000 {
ethernet@fe100000 {
compatible = "snps,dwmac-3.70a","snps,dwmac";
reg = <0xFE100000 0x1058>;
reg = <0xfe100000 0x1058>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <6 8>;
interrupt-names = "macirq";
clocks = <&ahb_clk>;
clock-names = "stmmaceth";
};
dma@FE000000 {
dma@fe000000 {
compatible = "snps,dma-spear1340";
reg = <0xFE000000 0x400>;
reg = <0xfe000000 0x400>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <14 8>;
dma-channels = <6>;
@ -132,70 +132,70 @@
multi-block = <1 1 1 1 1 1>;
};
i2c0: i2c@FF120000 {
i2c0: i2c@ff120000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF120000 0x1000>;
reg = <0xff120000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
i2c1: i2c@FF121000 {
i2c1: i2c@ff121000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF121000 0x1000>;
reg = <0xff121000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
i2c2: i2c@FF122000 {
i2c2: i2c@ff122000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF122000 0x1000>;
reg = <0xff122000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
i2c3: i2c@FF123000 {
i2c3: i2c@ff123000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF123000 0x1000>;
reg = <0xff123000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
i2c4: i2c@FF124000 {
i2c4: i2c@ff124000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xFF124000 0x1000>;
reg = <0xff124000 0x1000>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <12 8>;
clocks = <&ahb_clk>;
};
spi0: spi@0xFE010000 {
spi0: spi@fe010000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "abilis,tb100-spi";
num-cs = <1>;
reg = <0xFE010000 0x20>;
reg = <0xfe010000 0x20>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <26 8>;
clocks = <&ahb_clk>;
};
spi1: spi@0xFE011000 {
spi1: spi@fe011000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "abilis,tb100-spi";
num-cs = <2>;
reg = <0xFE011000 0x20>;
reg = <0xfe011000 0x20>;
interrupt-parent = <&tb10x_ictl>;
interrupts = <10 8>;
clocks = <&ahb_clk>;
@ -226,23 +226,23 @@
interrupts = <20 2>, <19 2>;
interrupt-names = "cmd_irq", "event_irq";
};
tb10x_mdsc0: tb10x-mdscr@FF300000 {
tb10x_mdsc0: tb10x-mdscr@ff300000 {
compatible = "abilis,tb100-mdscr";
reg = <0xFF300000 0x7000>;
reg = <0xff300000 0x7000>;
tb100-mdscr-manage-tsin;
};
tb10x_mscr0: tb10x-mdscr@FF307000 {
tb10x_mscr0: tb10x-mdscr@ff307000 {
compatible = "abilis,tb100-mdscr";
reg = <0xFF307000 0x7000>;
reg = <0xff307000 0x7000>;
};
tb10x_scr0: tb10x-mdscr@ff30e000 {
compatible = "abilis,tb100-mdscr";
reg = <0xFF30e000 0x4000>;
reg = <0xff30e000 0x4000>;
tb100-mdscr-manage-tsin;
};
tb10x_scr1: tb10x-mdscr@ff312000 {
compatible = "abilis,tb100-mdscr";
reg = <0xFF312000 0x4000>;
reg = <0xff312000 0x4000>;
tb100-mdscr-manage-tsin;
};
tb10x_wfb: tb10x-wfb@ff319000 {

6
arch/arc/boot/dts/axc001.dtsi
View File

@ -41,7 +41,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
dw-apb-gpio@0x2000 {
dw-apb-gpio@2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@ -60,7 +60,7 @@
};
};
debug_uart: dw-apb-uart@0x5000 {
debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@ -88,7 +88,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
mb_intc: dw-apb-ictl@0xe0012000 {
mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;

16
arch/arc/boot/dts/axc003.dtsi
View File

@ -55,7 +55,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
dw-apb-gpio@0x2000 {
dw-apb-gpio@2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@ -74,7 +74,7 @@
};
};
debug_uart: dw-apb-uart@0x5000 {
debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@ -102,19 +102,19 @@
* external DMA buffer located outside of IOC aperture.
*/
axs10x_mb {
ethernet@0x18000 {
ethernet@18000 {
dma-coherent;
};
ehci@0x40000 {
ehci@40000 {
dma-coherent;
};
ohci@0x60000 {
ohci@60000 {
dma-coherent;
};
mmc@0x15000 {
mmc@15000 {
dma-coherent;
};
};
@ -132,7 +132,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
mb_intc: dw-apb-ictl@0xe0012000 {
mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
@ -153,7 +153,7 @@
#size-cells = <2>;
ranges;
/*
* Move frame buffer out of IOC aperture (0x8z-0xAz).
* Move frame buffer out of IOC aperture (0x8z-0xaz).
*/
frame_buffer: frame_buffer@be000000 {
compatible = "shared-dma-pool";

16
arch/arc/boot/dts/axc003_idu.dtsi
View File

@ -62,7 +62,7 @@
* this GPIO block ORs all interrupts on CPU card (creg,..)
* to uplink only 1 IRQ to ARC core intc
*/
dw-apb-gpio@0x2000 {
dw-apb-gpio@2000 {
compatible = "snps,dw-apb-gpio";
reg = < 0x2000 0x80 >;
#address-cells = <1>;
@ -81,7 +81,7 @@
};
};
debug_uart: dw-apb-uart@0x5000 {
debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <33333000>;
@ -109,19 +109,19 @@
* external DMA buffer located outside of IOC aperture.
*/
axs10x_mb {
ethernet@0x18000 {
ethernet@18000 {
dma-coherent;
};
ehci@0x40000 {
ehci@40000 {
dma-coherent;
};
ohci@0x60000 {
ohci@60000 {
dma-coherent;
};
mmc@0x15000 {
mmc@15000 {
dma-coherent;
};
};
@ -138,7 +138,7 @@
* avoid duplicating the MB dtsi file given that IRQ from
* this intc to cpu intc are different for axs101 and axs103
*/
mb_intc: dw-apb-ictl@0xe0012000 {
mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0x0 0xe0012000 0x0 0x200 >;
@ -159,7 +159,7 @@
#size-cells = <2>;
ranges;
/*
* Move frame buffer out of IOC aperture (0x8z-0xAz).
* Move frame buffer out of IOC aperture (0x8z-0xaz).
*/
frame_buffer: frame_buffer@be000000 {
compatible = "shared-dma-pool";

22
arch/arc/boot/dts/axs10x_mb.dtsi
View File

@ -72,7 +72,7 @@
};
};
gmac: ethernet@0x18000 {
gmac: ethernet@18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@ -88,13 +88,13 @@
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
};
ehci@0x40000 {
ehci@40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
ohci@0x60000 {
ohci@60000 {
compatible = "generic-ohci";
reg = < 0x60000 0x100 >;
interrupts = < 8 >;
@ -118,7 +118,7 @@
* dw_mci_pltfm_prepare_command() is used in generic platform
* code.
*/
mmc@0x15000 {
mmc@15000 {
compatible = "altr,socfpga-dw-mshc";
reg = < 0x15000 0x400 >;
fifo-depth = < 16 >;
@ -129,7 +129,7 @@
bus-width = < 4 >;
};
uart@0x20000 {
uart@20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <33333333>;
@ -139,7 +139,7 @@
reg-io-width = <4>;
};
uart@0x21000 {
uart@21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <33333333>;
@ -150,7 +150,7 @@
};
/* UART muxed with USB data port (ttyS3) */
uart@0x22000 {
uart@22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <33333333>;
@ -160,7 +160,7 @@
reg-io-width = <4>;
};
i2c@0x1d000 {
i2c@1d000 {
compatible = "snps,designware-i2c";
reg = <0x1d000 0x100>;
clock-frequency = <400000>;
@ -177,7 +177,7 @@
#sound-dai-cells = <0>;
};
i2c@0x1f000 {
i2c@1f000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
#size-cells = <0>;
@ -218,13 +218,13 @@
};
};
eeprom@0x54{
eeprom@54{
compatible = "atmel,24c01";
reg = <0x54>;
pagesize = <0x8>;
};
eeprom@0x57{
eeprom@57{
compatible = "atmel,24c04";
reg = <0x57>;
pagesize = <0x8>;

33
arch/arc/boot/dts/hsdk.dts
View File

@ -110,12 +110,12 @@
cgu_rst: reset-controller@8a0 {
compatible = "snps,hsdk-reset";
#reset-cells = <1>;
reg = <0x8A0 0x4>, <0xFF0 0x4>;
reg = <0x8a0 0x4>, <0xff0 0x4>;
};
core_clk: core-clk@0 {
compatible = "snps,hsdk-core-pll-clock";
reg = <0x00 0x10>, <0x14B8 0x4>;
reg = <0x00 0x10>, <0x14b8 0x4>;
#clock-cells = <0>;
clocks = <&input_clk>;
@ -167,6 +167,18 @@
#clock-cells = <0>;
};
dmac_core_clk: dmac-core-clk {
compatible = "fixed-clock";
clock-frequency = <400000000>;
#clock-cells = <0>;
};
dmac_cfg_clk: dmac-gpu-cfg-clk {
compatible = "fixed-clock";
clock-frequency = <200000000>;
#clock-cells = <0>;
};
gmac: ethernet@8000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
@ -200,6 +212,7 @@
compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
reg = <0x60000 0x100>;
interrupts = <15>;
resets = <&cgu_rst HSDK_USB_RESET>;
dma-coherent;
};
@ -207,6 +220,7 @@
compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
reg = <0x40000 0x100>;
interrupts = <15>;
resets = <&cgu_rst HSDK_USB_RESET>;
dma-coherent;
};
@ -237,6 +251,21 @@
reg = <0>;
};
};
dmac: dmac@80000 {
compatible = "snps,axi-dma-1.01a";
reg = <0x80000 0x400>;
interrupts = <27>;
clocks = <&dmac_core_clk>, <&dmac_cfg_clk>;
clock-names = "core-clk", "cfgr-clk";
dma-channels = <4>;
snps,dma-masters = <2>;
snps,data-width = <3>;
snps,block-size = <4096 4096 4096 4096>;
snps,priority = <0 1 2 3>;
snps,axi-max-burst-len = <16>;
};
};
memory@80000000 {

4
arch/arc/boot/dts/vdk_axc003.dtsi
View File

@ -36,7 +36,7 @@
#interrupt-cells = <1>;
};
debug_uart: dw-apb-uart@0x5000 {
debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
@ -49,7 +49,7 @@
};
mb_intc: dw-apb-ictl@0xe0012000 {
mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;

4
arch/arc/boot/dts/vdk_axc003_idu.dtsi
View File

@ -44,7 +44,7 @@
#interrupt-cells = <1>;
};
debug_uart: dw-apb-uart@0x5000 {
debug_uart: dw-apb-uart@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
clock-frequency = <2403200>;
@ -57,7 +57,7 @@
};
mb_intc: dw-apb-ictl@0xe0012000 {
mb_intc: dw-apb-ictl@e0012000 {
#interrupt-cells = <1>;
compatible = "snps,dw-apb-ictl";
reg = < 0xe0012000 0x200 >;

18
arch/arc/boot/dts/vdk_axs10x_mb.dtsi
View File

@ -36,7 +36,7 @@
};
};
ethernet@0x18000 {
ethernet@18000 {
#interrupt-cells = <1>;
compatible = "snps,dwmac";
reg = < 0x18000 0x2000 >;
@ -49,13 +49,13 @@
clock-names = "stmmaceth";
};
ehci@0x40000 {
ehci@40000 {
compatible = "generic-ehci";
reg = < 0x40000 0x100 >;
interrupts = < 8 >;
};
uart@0x20000 {
uart@20000 {
compatible = "snps,dw-apb-uart";
reg = <0x20000 0x100>;
clock-frequency = <2403200>;
@ -65,7 +65,7 @@
reg-io-width = <4>;
};
uart@0x21000 {
uart@21000 {
compatible = "snps,dw-apb-uart";
reg = <0x21000 0x100>;
clock-frequency = <2403200>;
@ -75,7 +75,7 @@
reg-io-width = <4>;
};
uart@0x22000 {
uart@22000 {
compatible = "snps,dw-apb-uart";
reg = <0x22000 0x100>;
clock-frequency = <2403200>;
@ -101,7 +101,7 @@
interrupt-names = "arc_ps2_irq";
};
mmc@0x15000 {
mmc@15000 {
compatible = "snps,dw-mshc";
reg = <0x15000 0x400>;
fifo-depth = <1024>;
@ -117,11 +117,11 @@
* Embedded Vision subsystem UIO mappings; only relevant for EV VDK
*
* This node is intentionally put outside of MB above becase
* it maps areas outside of MB's 0xEz-0xFz.
* it maps areas outside of MB's 0xez-0xfz.
*/
uio_ev: uio@0xD0000000 {
uio_ev: uio@d0000000 {
compatible = "generic-uio";
reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>;
reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>;
reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem";
interrupt-parent = <&mb_intc>;
interrupts = <23>;

1
arch/arc/configs/hsdk_defconfig
View File

@ -8,6 +8,7 @@ CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_VM_EVENT_COUNTERS is not set

12
arch/arc/include/asm/arcregs.h
View File

@ -82,6 +82,7 @@
#define ECR_V_DTLB_MISS 0x05
#define ECR_V_PROTV 0x06
#define ECR_V_TRAP 0x09
#define ECR_V_MISALIGN 0x0d
#endif
/* DTLB Miss and Protection Violation Cause Codes */
@ -167,14 +168,6 @@ struct bcr_mpy {
#endif
};
struct bcr_extn_xymem {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int ram_org:2, num_banks:4, bank_sz:4, ver:8;
#else
unsigned int ver:8, bank_sz:4, num_banks:4, ram_org:2;
#endif
};
struct bcr_iccm_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int base:16, pad:5, sz:3, ver:8;
@ -312,7 +305,7 @@ struct cpuinfo_arc {
struct cpuinfo_arc_bpu bpu;
struct bcr_identity core;
struct bcr_isa_arcv2 isa;
const char *details, *name;
const char *release, *name;
unsigned int vec_base;
struct cpuinfo_arc_ccm iccm, dccm;
struct {
@ -322,7 +315,6 @@ struct cpuinfo_arc {
timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
} extn;
struct bcr_mpy extn_mpy;
struct bcr_extn_xymem extn_xymem;
};
extern struct cpuinfo_arc cpuinfo_arc700[];

8
arch/arc/include/asm/irqflags-arcv2.h
View File

@ -44,7 +44,13 @@
#define ARCV2_IRQ_DEF_PRIO 1
/* seed value for status register */
#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \
#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
#define __AD_ENB STATUS_AD_MASK
#else
#define __AD_ENB 0
#endif
#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | __AD_ENB | \
(ARCV2_IRQ_DEF_PRIO << 1))
#ifndef __ASSEMBLY__

2
arch/arc/include/asm/perf_event.h
View File

@ -105,10 +105,10 @@ static const char * const arc_pmu_ev_hw_map[] = {
[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
/* All jump instructions that are taken */
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
[PERF_COUNT_ARC_BPOK] = "bpok", /* NP-NT, PT-T, PNT-NT */
#ifdef CONFIG_ISA_ARCV2
[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
#else
[PERF_COUNT_ARC_BPOK] = "bpok", /* NP-NT, PT-T, PNT-NT */
[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
#endif
[PERF_COUNT_ARC_LDC] = "imemrdc", /* Instr: mem read cached */

49
arch/arc/include/asm/spinlock.h
View File

@ -21,8 +21,6 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
{
unsigned int val;
smp_mb();
__asm__ __volatile__(
"1: llock %[val], [%[slock]] \n"
" breq %[val], %[LOCKED], 1b \n" /* spin while LOCKED */
@ -34,6 +32,14 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
[LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
: "memory", "cc");
/*
* ACQUIRE barrier to ensure load/store after taking the lock
* don't "bleed-up" out of the critical section (leak-in is allowed)
* http://www.spinics.net/lists/kernel/msg2010409.html
*
* ARCv2 only has load-load, store-store and all-all barrier
* thus need the full all-all barrier
*/
smp_mb();
}
@ -42,8 +48,6 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
unsigned int val, got_it = 0;
smp_mb();
__asm__ __volatile__(
"1: llock %[val], [%[slock]] \n"
" breq %[val], %[LOCKED], 4f \n" /* already LOCKED, just bail */
@ -67,9 +71,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
smp_mb();
lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
smp_mb();
WRITE_ONCE(lock->slock, __ARCH_SPIN_LOCK_UNLOCKED__);
}
/*
@ -81,8 +83,6 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
{
unsigned int val;
smp_mb();
/*
* zero means writer holds the lock exclusively, deny Reader.
* Otherwise grant lock to first/subseq reader
@ -113,8 +113,6 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
{
unsigned int val, got_it = 0;
smp_mb();
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" brls %[val], %[WR_LOCKED], 4f\n" /* <= 0: already write locked, bail */
@ -140,8 +138,6 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
{
unsigned int val;
smp_mb();
/*
* If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
* deny writer. Otherwise if unlocked grant to writer
@ -175,8 +171,6 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
{
unsigned int val, got_it = 0;
smp_mb();
__asm__ __volatile__(
"1: llock %[val], [%[rwlock]] \n"
" brne %[val], %[UNLOCKED], 4f \n" /* !UNLOCKED, bail */
@ -217,17 +211,13 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
: [val] "=&r" (val)
: [rwlock] "r" (&(rw->counter))
: "memory", "cc");
smp_mb();
}
static inline void arch_write_unlock(arch_rwlock_t *rw)
{
smp_mb();
rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
smp_mb();
WRITE_ONCE(rw->counter, __ARCH_RW_LOCK_UNLOCKED__);
}
#else /* !CONFIG_ARC_HAS_LLSC */
@ -237,10 +227,9 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
unsigned int val = __ARCH_SPIN_LOCK_LOCKED__;
/*
* This smp_mb() is technically superfluous, we only need the one
* after the lock for providing the ACQUIRE semantics.
* However doing the "right" thing was regressing hackbench
* so keeping this, pending further investigation
* Per lkmm, smp_mb() is only required after _lock (and before_unlock)
* for ACQ and REL semantics respectively. However EX based spinlocks
* need the extra smp_mb to workaround a hardware quirk.
*/
smp_mb();
@ -257,14 +246,6 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
#endif
: "memory");
/*
* ACQUIRE barrier to ensure load/store after taking the lock
* don't "bleed-up" out of the critical section (leak-in is allowed)
* http://www.spinics.net/lists/kernel/msg2010409.html
*
* ARCv2 only has load-load, store-store and all-all barrier
* thus need the full all-all barrier
*/
smp_mb();
}
@ -309,8 +290,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock)
: "memory");
/*
* superfluous, but keeping for now - see pairing version in
* arch_spin_lock above
* see pairing version/comment in arch_spin_lock above
*/
smp_mb();
}
@ -344,7 +324,6 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
arch_spin_unlock(&(rw->lock_mutex));
local_irq_restore(flags);
smp_mb();
return ret;
}

2
arch/arc/include/uapi/asm/Kbuild
View File

@ -1,4 +1,2 @@
include include/uapi/asm-generic/Kbuild.asm
generic-y += kvm_para.h
generic-y += ucontext.h

6
arch/arc/kernel/head.S
View File

@ -54,7 +54,12 @@
; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
; by default
lr r5, [status32]
#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
bset r5, r5, STATUS_AD_BIT
#else
; Although disabled at reset, bootloader might have enabled it
bclr r5, r5, STATUS_AD_BIT
#endif
kflag r5
#endif
.endm
@ -106,6 +111,7 @@ ENTRY(stext)
; r2 = pointer to uboot provided cmdline or external DTB in mem
; These are handled later in handle_uboot_args()
st r0, [@uboot_tag]
st r1, [@uboot_magic]
st r2, [@uboot_arg]
; setup "current" tsk and optionally cache it in dedicated r25

2
arch/arc/kernel/intc-arcv2.c
View File

@ -95,7 +95,7 @@ void arc_init_IRQ(void)
/* setup status32, don't enable intr yet as kernel doesn't want */
tmp = read_aux_reg(ARC_REG_STATUS32);
tmp |= STATUS_AD_MASK | (ARCV2_IRQ_DEF_PRIO << 1);
tmp |= ARCV2_IRQ_DEF_PRIO << 1;
tmp &= ~STATUS_IE_MASK;
asm volatile("kflag %0 \n"::"r"(tmp));
}

209
arch/arc/kernel/setup.c
View File

@ -36,6 +36,7 @@ unsigned int intr_to_DE_cnt;
/* Part of U-boot ABI: see head.S */
int __initdata uboot_tag;
int __initdata uboot_magic;
char __initdata *uboot_arg;
const struct machine_desc *machine_desc;
@ -44,29 +45,24 @@ struct task_struct *_current_task[NR_CPUS]; /* For stack switching */
struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
static const struct id_to_str arc_cpu_rel[] = {
static const struct id_to_str arc_legacy_rel[] = {
/* ID.ARCVER, Release */
#ifdef CONFIG_ISA_ARCOMPACT
{ 0x34, "R4.10"},
{ 0x35, "R4.11"},
{ 0x34, "R4.10"},
{ 0x35, "R4.11"},
#else
{ 0x51, "R2.0" },
{ 0x52, "R2.1" },
{ 0x53, "R3.0" },
{ 0x54, "R3.10a" },
{ 0x51, "R2.0" },
{ 0x52, "R2.1" },
{ 0x53, "R3.0" },
#endif
{ 0x00, NULL }
{ 0x00, NULL }
};
static const struct id_to_str arc_cpu_nm[] = {
#ifdef CONFIG_ISA_ARCOMPACT
{ 0x20, "ARC 600" },
{ 0x30, "ARC 770" }, /* 750 identified seperately */
#else
{ 0x40, "ARC EM" },
{ 0x50, "ARC HS38" },
{ 0x54, "ARC HS48" },
#endif
{ 0x00, "Unknown" }
static const struct id_to_str arc_cpu_rel[] = {
/* UARCH.MAJOR, Release */
{ 0, "R3.10a"},
{ 1, "R3.50a"},
{ 0xFF, NULL }
};
static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
@ -116,31 +112,72 @@ static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
}
}
static void decode_arc_core(struct cpuinfo_arc *cpu)
{
struct bcr_uarch_build_arcv2 uarch;
const struct id_to_str *tbl;
/*
* Up until (including) the first core4 release (0x54) things were
* simple: AUX IDENTITY.ARCVER was sufficient to identify arc family
* and release: 0x50 to 0x53 was HS38, 0x54 was HS48 (dual issue)
*/
if (cpu->core.family < 0x54) { /* includes arc700 */
for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
if (cpu->core.family == tbl->id) {
cpu->release = tbl->str;
break;
}
}
if (is_isa_arcompact())
cpu->name = "ARC700";
else if (tbl->str)
cpu->name = "HS38";
else
cpu->name = cpu->release = "Unknown";
return;
}
/*
* However the subsequent HS release (same 0x54) allow HS38 or HS48
* configurations and encode this info in a different BCR.
* The BCR was introduced in 0x54 so can't be read unconditionally.
*/
READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
if (uarch.prod == 4) {
cpu->name = "HS48";
cpu->extn.dual = 1;
} else {
cpu->name = "HS38";
}
for (tbl = &arc_cpu_rel[0]; tbl->id != 0xFF; tbl++) {
if (uarch.maj == tbl->id) {
cpu->release = tbl->str;
break;
}
}
}
static void read_arc_build_cfg_regs(void)
{
struct bcr_timer timer;
struct bcr_generic bcr;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
const struct id_to_str *tbl;
struct bcr_isa_arcv2 isa;
struct bcr_actionpoint ap;
FIX_PTR(cpu);
READ_BCR(AUX_IDENTITY, cpu->core);
for (tbl = &arc_cpu_rel[0]; tbl->id != 0; tbl++) {
if (cpu->core.family == tbl->id) {
cpu->details = tbl->str;
break;
}
}
for (tbl = &arc_cpu_nm[0]; tbl->id != 0; tbl++) {
if ((cpu->core.family & 0xF4) == tbl->id)
break;
}
cpu->name = tbl->str;
decode_arc_core(cpu);
READ_BCR(ARC_REG_TIMERS_BCR, timer);
cpu->extn.timer0 = timer.t0;
@ -151,16 +188,6 @@ static void read_arc_build_cfg_regs(void)
READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
cpu->extn.norm = read_aux_reg(ARC_REG_NORM_BCR) > 1 ? 1 : 0; /* 2,3 */
cpu->extn.barrel = read_aux_reg(ARC_REG_BARREL_BCR) > 1 ? 1 : 0; /* 2,3 */
cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0; /* 1,3 */
cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
cpu->extn.swape = (cpu->core.family >= 0x34) ? 1 :
IS_ENABLED(CONFIG_ARC_HAS_SWAPE);
READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
read_decode_ccm_bcr(cpu);
@ -198,30 +225,12 @@ static void read_arc_build_cfg_regs(void)
cpu->bpu.num_pred = 2048 << bpu.pte;
cpu->bpu.ret_stk = 4 << bpu.rse;
if (cpu->core.family >= 0x54) {
/* if dual issue hardware, is it enabled ? */
if (cpu->extn.dual) {
unsigned int exec_ctrl;
struct bcr_uarch_build_arcv2 uarch;
/*
* The first 0x54 core (uarch maj:min 0:1 or 0:2) was
* dual issue only (HS4x). But next uarch rev (1:0)
* allows it be configured for single issue (HS3x)
* Ensure we fiddle with dual issue only on HS4x
*/
READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
if (uarch.prod == 4) {
unsigned int exec_ctrl;
/* dual issue hardware always present */
cpu->extn.dual = 1;
READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
/* dual issue hardware enabled ? */
cpu->extn.dual_enb = !(exec_ctrl & 1);
}
READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
cpu->extn.dual_enb = !(exec_ctrl & 1);
}
}
@ -263,7 +272,8 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
{
struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
struct bcr_identity *core = &cpu->core;
int i, n = 0, ua = 0;
char mpy_opt[16];
int n = 0;
FIX_PTR(cpu);
@ -272,7 +282,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
core->family, core->cpu_id, core->chip_id);
n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
cpu_id, cpu->name, cpu->details,
cpu_id, cpu->name, cpu->release,
is_isa_arcompact() ? "ARCompact" : "ARCv2",
IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue "));
@ -283,61 +293,50 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
#ifdef __ARC_UNALIGNED__
ua = 1;
#endif
n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s%s",
IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
IS_AVAIL1(cpu->isa.unalign, "unalign "), IS_USED_RUN(ua));
if (i)
n += scnprintf(buf + n, len - n, "\n\t\t: ");
if (cpu->extn_mpy.ver) {
if (cpu->extn_mpy.ver <= 0x2) { /* ARCompact */
n += scnprintf(buf + n, len - n, "mpy ");
if (is_isa_arcompact()) {
scnprintf(mpy_opt, 16, "mpy");
} else {
int opt = 2; /* stock MPY/MPYH */
if (cpu->extn_mpy.dsp) /* OPT 7-9 */
opt = cpu->extn_mpy.dsp + 6;
n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
scnprintf(mpy_opt, 16, "mpy[opt %d] ", opt);
}
}
n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
IS_AVAIL1(cpu->isa.div_rem, "div_rem "),
IS_AVAIL1(cpu->extn.norm, "norm "),
IS_AVAIL1(cpu->extn.barrel, "barrel-shift "),
IS_AVAIL1(cpu->extn.swap, "swap "),
IS_AVAIL1(cpu->extn.minmax, "minmax "),
IS_AVAIL1(cpu->extn.crc, "crc "),
IS_AVAIL2(cpu->extn.swape, "swape", CONFIG_ARC_HAS_SWAPE));
IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
IS_AVAIL2(cpu->isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
IS_AVAIL1(cpu->extn_mpy.ver, mpy_opt),
IS_AVAIL1(cpu->isa.div_rem, "div_rem "));
if (cpu->bpu.ver)
if (cpu->bpu.ver) {
n += scnprintf(buf + n, len - n,
"BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d",
IS_AVAIL1(cpu->bpu.full, "full"),
IS_AVAIL1(!cpu->bpu.full, "partial"),
cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk);
if (is_isa_arcv2()) {
struct bcr_lpb lpb;
if (is_isa_arcv2()) {
struct bcr_lpb lpb;
READ_BCR(ARC_REG_LPB_BUILD, lpb);
if (lpb.ver) {
unsigned int ctl;
ctl = read_aux_reg(ARC_REG_LPB_CTRL);
READ_BCR(ARC_REG_LPB_BUILD, lpb);
if (lpb.ver) {
unsigned int ctl;
ctl = read_aux_reg(ARC_REG_LPB_CTRL);
n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s",
lpb.entries,
IS_DISABLED_RUN(!ctl));
n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s",
lpb.entries,
IS_DISABLED_RUN(!ctl));
}
}
n += scnprintf(buf + n, len - n, "\n");
}
n += scnprintf(buf + n, len - n, "\n");
return buf;
}
@ -390,11 +389,6 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
}
}
n += scnprintf(buf + n, len - n, "OS ABI [v%d]\t: %s\n",
EF_ARC_OSABI_CURRENT >> 8,
EF_ARC_OSABI_CURRENT == EF_ARC_OSABI_V3 ?
"no-legacy-syscalls" : "64-bit data any register aligned");
return buf;
}
@ -497,6 +491,8 @@ static inline bool uboot_arg_invalid(unsigned long addr)
#define UBOOT_TAG_NONE 0
#define UBOOT_TAG_CMDLINE 1
#define UBOOT_TAG_DTB 2
/* We always pass 0 as magic from U-boot */
#define UBOOT_MAGIC_VALUE 0
void __init handle_uboot_args(void)
{
@ -511,6 +507,11 @@ void __init handle_uboot_args(void)
goto ignore_uboot_args;
}
if (uboot_magic != UBOOT_MAGIC_VALUE) {
pr_warn(IGNORE_ARGS "non zero uboot magic\n");
goto ignore_uboot_args;
}
if (uboot_tag != UBOOT_TAG_NONE &&
uboot_arg_invalid((unsigned long)uboot_arg)) {
pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg);

5
arch/arc/kernel/troubleshoot.c
View File

@ -145,7 +145,8 @@ static void show_ecr_verbose(struct pt_regs *regs)
} else if (vec == ECR_V_PROTV) {
if (cause_code == ECR_C_PROTV_INST_FETCH)
pr_cont("Execute from Non-exec Page\n");
else if (cause_code == ECR_C_PROTV_MISALIG_DATA)
else if (cause_code == ECR_C_PROTV_MISALIG_DATA &&
IS_ENABLED(CONFIG_ISA_ARCOMPACT))
pr_cont("Misaligned r/w from 0x%08lx\n", address);
else
pr_cont("%s access not allowed on page\n",
@ -161,6 +162,8 @@ static void show_ecr_verbose(struct pt_regs *regs)
pr_cont("Bus Error from Data Mem\n");
else
pr_cont("Bus Error, check PRM\n");
} else if (vec == ECR_V_MISALIGN) {
pr_cont("Misaligned r/w from 0x%08lx\n", address);
#endif
} else if (vec == ECR_V_TRAP) {
if (regs->ecr_param == 5)

8
arch/arc/lib/Makefile
View File

@ -8,4 +8,10 @@
lib-y := strchr-700.o strcpy-700.o strlen.o memcmp.o
lib-$(CONFIG_ISA_ARCOMPACT) += memcpy-700.o memset.o strcmp.o
lib-$(CONFIG_ISA_ARCV2) += memcpy-archs.o memset-archs.o strcmp-archs.o
lib-$(CONFIG_ISA_ARCV2) += memset-archs.o strcmp-archs.o
ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
lib-$(CONFIG_ISA_ARCV2) +=memcpy-archs-unaligned.o
else
lib-$(CONFIG_ISA_ARCV2) +=memcpy-archs.o
endif

47
arch/arc/lib/memcpy-archs-unaligned.S Normal file
View File

@ -0,0 +1,47 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* ARCv2 memcpy implementation optimized for unaligned memory access using.
*
* Copyright (C) 2019 Synopsys
* Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
*/
#include <linux/linkage.h>
#ifdef CONFIG_ARC_HAS_LL64
# define LOADX(DST,RX) ldd.ab DST, [RX, 8]
# define STOREX(SRC,RX) std.ab SRC, [RX, 8]
# define ZOLSHFT 5
# define ZOLAND 0x1F
#else
# define LOADX(DST,RX) ld.ab DST, [RX, 4]
# define STOREX(SRC,RX) st.ab SRC, [RX, 4]
# define ZOLSHFT 4
# define ZOLAND 0xF
#endif
ENTRY_CFI(memcpy)
mov r3, r0 ; don;t clobber ret val
lsr.f lp_count, r2, ZOLSHFT
lpnz @.Lcopy32_64bytes
;; LOOP START
LOADX (r6, r1)
LOADX (r8, r1)
LOADX (r10, r1)
LOADX (r4, r1)
STOREX (r6, r3)
STOREX (r8, r3)
STOREX (r10, r3)
STOREX (r4, r3)
.Lcopy32_64bytes:
and.f lp_count, r2, ZOLAND ;Last remaining 31 bytes
lpnz @.Lcopyremainingbytes
;; LOOP START
ldb.ab r5, [r1, 1]
stb.ab r5, [r3, 1]
.Lcopyremainingbytes:
j [blink]
END_CFI(memcpy)

12
arch/arc/plat-eznps/Kconfig
View File

@ -26,8 +26,8 @@ config EZNPS_MTM_EXT
help
Here we add new hierarchy for CPUs topology.
We got:
Core
Thread
Core
Thread
At the new thread level each CPU represent one HW thread.
At highest hierarchy each core contain 16 threads,
any of them seem like CPU from Linux point of view.
@ -35,10 +35,10 @@ config EZNPS_MTM_EXT
core and HW scheduler round robin between them.
config EZNPS_MEM_ERROR_ALIGN
bool "ARC-EZchip Memory error as an exception"
depends on EZNPS_MTM_EXT
default n
help
bool "ARC-EZchip Memory error as an exception"
depends on EZNPS_MTM_EXT
default n
help
On the real chip of the NPS, user memory errors are handled
as a machine check exception, which is fatal, whereas on
simulator platform for NPS, is handled as a Level 2 interrupt

3
arch/arm/Kconfig
View File

@ -1310,7 +1310,7 @@ config SCHED_SMT
config HAVE_ARM_SCU
bool
help
This option enables support for the ARM system coherency unit
This option enables support for the ARM snoop control unit
config HAVE_ARM_ARCH_TIMER
bool "Architected timer support"
@ -1322,7 +1322,6 @@ config HAVE_ARM_ARCH_TIMER
config HAVE_ARM_TWD
bool
select TIMER_OF if OF
help
This options enables support for the ARM timer and watchdog unit

2
arch/arm/Kconfig-nommu
View File

@ -20,10 +20,12 @@ config DRAM_SIZE
config FLASH_MEM_BASE
hex 'FLASH Base Address' if SET_MEM_PARAM
depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T
default 0x00400000
config FLASH_SIZE
hex 'FLASH Size' if SET_MEM_PARAM
depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T
default 0x00400000
config PROCESSOR_ID

2
arch/arm/Makefile
View File

@ -10,7 +10,7 @@
#
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p --no-undefined -X --pic-veneer
LDFLAGS_vmlinux := --no-undefined -X --pic-veneer
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
KBUILD_LDFLAGS_MODULE += --be8

2
arch/arm/boot/bootp/Makefile
View File

@ -8,7 +8,7 @@
GCOV_PROFILE := n
LDFLAGS_bootp :=-p --no-undefined -X \
LDFLAGS_bootp := --no-undefined -X \
--defsym initrd_phys=$(INITRD_PHYS) \
--defsym params_phys=$(PARAMS_PHYS) -T
AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"

2
arch/arm/boot/bootp/init.S
View File

@ -44,7 +44,7 @@ _start: add lr, pc, #-0x8 @ lr = current load addr
*/
movne r10, #0 @ terminator
movne r4, #2 @ Size of this entry (2 words)
stmneia r9, {r4, r5, r10} @ Size, ATAG_CORE, terminator
stmiane r9, {r4, r5, r10} @ Size, ATAG_CORE, terminator
/*
* find the end of the tag list, and then add an INITRD tag on the end.

2
arch/arm/boot/compressed/Makefile
View File

@ -132,8 +132,6 @@ endif
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
# ?
LDFLAGS_vmlinux += -p
# Report unresolved symbol references
LDFLAGS_vmlinux += --no-undefined
# Delete all temporary local symbols

4
arch/arm/boot/compressed/ll_char_wr.S
View File

@ -75,7 +75,7 @@ Lrow4bpplp:
tst r1, #7 @ avoid using r7 directly after
str r7, [r0, -r5]!
subne r1, r1, #1
ldrneb r7, [r6, r1]
ldrbne r7, [r6, r1]
bne Lrow4bpplp
ldmfd sp!, {r4 - r7, pc}
@ -103,7 +103,7 @@ Lrow8bpplp:
sub r0, r0, r5 @ avoid ip
stmia r0, {r4, ip}
subne r1, r1, #1
ldrneb r7, [r6, r1]
ldrbne r7, [r6, r1]
bne Lrow8bpplp
ldmfd sp!, {r4 - r7, pc}

3
arch/arm/boot/dts/imx28-cfa10036.dts
View File

@ -11,6 +11,7 @@
/dts-v1/;
#include "imx28.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Crystalfontz CFA-10036 Board";
@ -96,7 +97,7 @@
pinctrl-names = "default";
pinctrl-0 = <&ssd1306_cfa10036>;
reg = <0x3c>;
reset-gpios = <&gpio2 7 0>;
reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
solomon,height = <32>;
solomon,width = <128>;
solomon,page-offset = <0>;

2
arch/arm/common/mcpm_entry.c
View File

@ -381,7 +381,7 @@ static int __init nocache_trampoline(unsigned long _arg)
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
phys_reset_t phys_reset;
mcpm_set_entry_vector(cpu, cluster, cpu_resume);
mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
setup_mm_for_reboot();
__mcpm_cpu_going_down(cpu, cluster);

1
arch/arm/include/asm/Kbuild
View File

@ -18,7 +18,6 @@ generic-y += segment.h
generic-y += serial.h
generic-y += simd.h
generic-y += sizes.h
generic-y += timex.h
generic-y += trace_clock.h
generated-y += mach-types.h

4
arch/arm/include/asm/arch_gicv3.h
View File

@ -55,7 +55,7 @@
#define ICH_VTR __ACCESS_CP15(c12, 4, c11, 1)
#define ICH_MISR __ACCESS_CP15(c12, 4, c11, 2)
#define ICH_EISR __ACCESS_CP15(c12, 4, c11, 3)
#define ICH_ELSR __ACCESS_CP15(c12, 4, c11, 5)
#define ICH_ELRSR __ACCESS_CP15(c12, 4, c11, 5)
#define ICH_VMCR __ACCESS_CP15(c12, 4, c11, 7)
#define __LR0(x) __ACCESS_CP15(c12, 4, c12, x)
@ -152,7 +152,7 @@ CPUIF_MAP(ICH_HCR, ICH_HCR_EL2)
CPUIF_MAP(ICH_VTR, ICH_VTR_EL2)
CPUIF_MAP(ICH_MISR, ICH_MISR_EL2)
CPUIF_MAP(ICH_EISR, ICH_EISR_EL2)
CPUIF_MAP(ICH_ELSR, ICH_ELSR_EL2)
CPUIF_MAP(ICH_ELRSR, ICH_ELRSR_EL2)
CPUIF_MAP(ICH_VMCR, ICH_VMCR_EL2)
CPUIF_MAP(ICH_AP0R3, ICH_AP0R3_EL2)
CPUIF_MAP(ICH_AP0R2, ICH_AP0R2_EL2)

12
arch/arm/include/asm/assembler.h
View File

@ -376,9 +376,9 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
.macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
9999:
.if \inc == 1
\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
\instr\()b\t\cond\().w \reg, [\ptr, #\off]
.elseif \inc == 4
\instr\cond\()\t\().w \reg, [\ptr, #\off]
\instr\t\cond\().w \reg, [\ptr, #\off]
.else
.error "Unsupported inc macro argument"
.endif
@ -417,9 +417,9 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
.rept \rept
9999:
.if \inc == 1
\instr\cond\()b\()\t \reg, [\ptr], #\inc
\instr\()b\t\cond \reg, [\ptr], #\inc
.elseif \inc == 4
\instr\cond\()\t \reg, [\ptr], #\inc
\instr\t\cond \reg, [\ptr], #\inc
.else
.error "Unsupported inc macro argument"
.endif
@ -460,7 +460,7 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
#ifndef CONFIG_CPU_USE_DOMAINS
adds \tmp, \addr, #\size - 1
sbcccs \tmp, \tmp, \limit
sbcscc \tmp, \tmp, \limit
bcs \bad
#ifdef CONFIG_CPU_SPECTRE
movcs \addr, #0
@ -474,7 +474,7 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
sub \tmp, \limit, #1
subs \tmp, \tmp, \addr @ tmp = limit - 1 - addr
addhs \tmp, \tmp, #1 @ if (tmp >= 0) {
subhss \tmp, \tmp, \size @ tmp = limit - (addr + size) }
subshs \tmp, \tmp, \size @ tmp = limit - (addr + size) }
movlo \addr, #0 @ if (tmp < 0) addr = NULL
csdb
#endif

2
arch/arm/include/asm/barrier.h
View File

@ -11,6 +11,8 @@
#define sev() __asm__ __volatile__ ("sev" : : : "memory")
#define wfe() __asm__ __volatile__ ("wfe" : : : "memory")
#define wfi() __asm__ __volatile__ ("wfi" : : : "memory")
#else
#define wfe() do { } while (0)
#endif
#if __LINUX_ARM_ARCH__ >= 7

10
arch/arm/include/asm/hardware/entry-macro-iomd.S
View File

@ -16,25 +16,25 @@
ldr \tmp, =irq_prio_h
teq \irqstat, #0
#ifdef IOMD_BASE
ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma
ldrbeq \irqstat, [\base, #IOMD_DMAREQ] @ get dma
addeq \tmp, \tmp, #256 @ irq_prio_h table size
teqeq \irqstat, #0
bne 2406f
#endif
ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority
ldrbeq \irqstat, [\base, #IOMD_IRQREQA] @ get low priority
addeq \tmp, \tmp, #256 @ irq_prio_d table size
teqeq \irqstat, #0
#ifdef IOMD_IRQREQC
ldreqb \irqstat, [\base, #IOMD_IRQREQC]
ldrbeq \irqstat, [\base, #IOMD_IRQREQC]
addeq \tmp, \tmp, #256 @ irq_prio_l table size
teqeq \irqstat, #0
#endif
#ifdef IOMD_IRQREQD
ldreqb \irqstat, [\base, #IOMD_IRQREQD]
ldrbeq \irqstat, [\base, #IOMD_IRQREQD]
addeq \tmp, \tmp, #256 @ irq_prio_lc table size
teqeq \irqstat, #0
#endif
2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number
2406: ldrbne \irqnr, [\tmp, \irqstat] @ get IRQ number
.endm
/*

8
arch/arm/include/asm/kvm_emulate.h
View File

@ -265,6 +265,14 @@ static inline bool kvm_vcpu_dabt_isextabt(struct kvm_vcpu *vcpu)
}
}
static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
{
if (kvm_vcpu_trap_is_iabt(vcpu))
return false;
return kvm_vcpu_dabt_iswrite(vcpu);
}
static inline u32 kvm_vcpu_hvc_get_imm(struct kvm_vcpu *vcpu)
{
return kvm_vcpu_get_hsr(vcpu) & HSR_HVC_IMM_MASK;

53
arch/arm/include/asm/kvm_host.h
View File

@ -26,6 +26,7 @@
#include <asm/kvm_asm.h>
#include <asm/kvm_mmio.h>
#include <asm/fpstate.h>
#include <asm/smp_plat.h>
#include <kvm/arm_arch_timer.h>
#define __KVM_HAVE_ARCH_INTC_INITIALIZED
@ -57,10 +58,13 @@ int __attribute_const__ kvm_target_cpu(void);
int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
void kvm_reset_coprocs(struct kvm_vcpu *vcpu);
struct kvm_arch {
/* VTTBR value associated with below pgd and vmid */
u64 vttbr;
struct kvm_vmid {
/* The VMID generation used for the virt. memory system */
u64 vmid_gen;
u32 vmid;
};
struct kvm_arch {
/* The last vcpu id that ran on each physical CPU */
int __percpu *last_vcpu_ran;
@ -70,11 +74,11 @@ struct kvm_arch {
*/
/* The VMID generation used for the virt. memory system */
u64 vmid_gen;
u32 vmid;
struct kvm_vmid vmid;
/* Stage-2 page table */
pgd_t *pgd;
phys_addr_t pgd_phys;
/* Interrupt controller */
struct vgic_dist vgic;
@ -148,6 +152,13 @@ struct kvm_cpu_context {
typedef struct kvm_cpu_context kvm_cpu_context_t;
static inline void kvm_init_host_cpu_context(kvm_cpu_context_t *cpu_ctxt,
int cpu)
{
/* The host's MPIDR is immutable, so let's set it up at boot time */
cpu_ctxt->cp15[c0_MPIDR] = cpu_logical_map(cpu);
}
struct vcpu_reset_state {
unsigned long pc;
unsigned long r0;
@ -224,7 +235,35 @@ unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu);
int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
unsigned long kvm_call_hyp(void *hypfn, ...);
unsigned long __kvm_call_hyp(void *hypfn, ...);
/*
* The has_vhe() part doesn't get emitted, but is used for type-checking.
*/
#define kvm_call_hyp(f, ...) \
do { \
if (has_vhe()) { \
f(__VA_ARGS__); \
} else { \
__kvm_call_hyp(kvm_ksym_ref(f), ##__VA_ARGS__); \
} \
} while(0)
#define kvm_call_hyp_ret(f, ...) \
({ \
typeof(f(__VA_ARGS__)) ret; \
\
if (has_vhe()) { \
ret = f(__VA_ARGS__); \
} else { \
ret = __kvm_call_hyp(kvm_ksym_ref(f), \
##__VA_ARGS__); \
} \
\
ret; \
})
void force_vm_exit(const cpumask_t *mask);
int __kvm_arm_vcpu_get_events(struct kvm_vcpu *vcpu,
struct kvm_vcpu_events *events);
@ -275,7 +314,7 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
* compliant with the PCS!).
*/
kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
__kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr);
}
static inline void __cpu_init_stage2(void)

4
arch/arm/include/asm/kvm_hyp.h
View File

@ -40,6 +40,7 @@
#define TTBR1 __ACCESS_CP15_64(1, c2)
#define VTTBR __ACCESS_CP15_64(6, c2)
#define PAR __ACCESS_CP15_64(0, c7)
#define CNTP_CVAL __ACCESS_CP15_64(2, c14)
#define CNTV_CVAL __ACCESS_CP15_64(3, c14)
#define CNTVOFF __ACCESS_CP15_64(4, c14)
@ -85,6 +86,7 @@
#define TID_PRIV __ACCESS_CP15(c13, 0, c0, 4)
#define HTPIDR __ACCESS_CP15(c13, 4, c0, 2)
#define CNTKCTL __ACCESS_CP15(c14, 0, c1, 0)
#define CNTP_CTL __ACCESS_CP15(c14, 0, c2, 1)
#define CNTV_CTL __ACCESS_CP15(c14, 0, c3, 1)
#define CNTHCTL __ACCESS_CP15(c14, 4, c1, 0)
@ -94,6 +96,8 @@
#define read_sysreg_el0(r) read_sysreg(r##_el0)
#define write_sysreg_el0(v, r) write_sysreg(v, r##_el0)
#define cntp_ctl_el0 CNTP_CTL
#define cntp_cval_el0 CNTP_CVAL
#define cntv_ctl_el0 CNTV_CTL
#define cntv_cval_el0 CNTV_CVAL
#define cntvoff_el2 CNTVOFF

9
arch/arm/include/asm/kvm_mmu.h
View File

@ -421,9 +421,14 @@ static inline int hyp_map_aux_data(void)
static inline void kvm_set_ipa_limit(void) {}
static inline bool kvm_cpu_has_cnp(void)
static __always_inline u64 kvm_get_vttbr(struct kvm *kvm)
{
return false;
struct kvm_vmid *vmid = &kvm->arch.vmid;
u64 vmid_field, baddr;
baddr = kvm->arch.pgd_phys;
vmid_field = (u64)vmid->vmid << VTTBR_VMID_SHIFT;
return kvm_phys_to_vttbr(baddr) | vmid_field;
}
#endif /* !__ASSEMBLY__ */

3
arch/arm/include/asm/pgtable.h
View File

@ -125,6 +125,9 @@ extern pgprot_t pgprot_s2_device;
#define pgprot_stronglyordered(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
#define pgprot_device(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_DEV_SHARED | L_PTE_SHARED | L_PTE_DIRTY | L_PTE_XN)
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)

6
arch/arm/include/asm/processor.h
View File

@ -89,7 +89,11 @@ extern void release_thread(struct task_struct *);
unsigned long get_wchan(struct task_struct *p);
#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
#define cpu_relax() smp_mb()
#define cpu_relax() \
do { \
smp_mb(); \
__asm__ __volatile__("nop; nop; nop; nop; nop; nop; nop; nop; nop; nop;"); \
} while (0)
#else
#define cpu_relax() barrier()
#endif

1
arch/arm/include/asm/smp.h
View File

@ -67,7 +67,6 @@ struct secondary_data {
void *stack;
};
extern struct secondary_data secondary_data;
extern volatile int pen_release;
extern void secondary_startup(void);
extern void secondary_startup_arm(void);

16
arch/arm/include/asm/smp_twd.h
View File

@ -19,20 +19,4 @@
#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
#include <linux/ioport.h>
struct twd_local_timer {
struct resource res[2];
};
#define DEFINE_TWD_LOCAL_TIMER(name,base,irq) \
struct twd_local_timer name __initdata = { \
.res = { \
DEFINE_RES_MEM(base, 0x10), \
DEFINE_RES_IRQ(irq), \
}, \
};
int twd_local_timer_register(struct twd_local_timer *);
#endif

3
arch/arm/include/asm/spinlock.h
View File

@ -210,11 +210,12 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
prefetchw(&rw->lock);
__asm__ __volatile__(
" .syntax unified\n"
"1: ldrex %0, [%2]\n"
" adds %0, %0, #1\n"
" strexpl %1, %0, [%2]\n"
WFE("mi")
" rsbpls %0, %1, #0\n"
" rsbspl %0, %1, #0\n"
" bmi 1b"
: "=&r" (tmp), "=&r" (tmp2)
: "r" (&rw->lock)

1
arch/arm/include/asm/suspend.h
View File

@ -10,6 +10,7 @@ struct sleep_save_sp {
};
extern void cpu_resume(void);
extern void cpu_resume_no_hyp(void);
extern void cpu_resume_arm(void);
extern int cpu_suspend(unsigned long, int (*)(unsigned long));

3
arch/arm/include/asm/uaccess.h
View File

@ -85,7 +85,8 @@ static inline void set_fs(mm_segment_t fs)
#define __range_ok(addr, size) ({ \
unsigned long flag, roksum; \
__chk_user_ptr(addr); \
__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
__asm__(".syntax unified\n" \
"adds %1, %2, %3; sbcscc %1, %1, %0; movcc %0, #0" \
: "=&r" (flag), "=&r" (roksum) \
: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
: "cc"); \

2
arch/arm/include/asm/v7m.h
View File

@ -49,7 +49,7 @@
* (0 -> msp; 1 -> psp). Bits [1:0] are fixed to 0b01.
*/
#define EXC_RET_STACK_MASK 0x00000004
#define EXC_RET_THREADMODE_PROCESSSTACK 0xfffffffd
#define EXC_RET_THREADMODE_PROCESSSTACK (3 << 2)
/* Cache related definitions */

8
arch/arm/include/asm/vfpmacros.h
View File

@ -29,13 +29,13 @@
ldr \tmp, =elf_hwcap @ may not have MVFR regs
ldr \tmp, [\tmp, #0]
tst \tmp, #HWCAP_VFPD32
ldcnel p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
ldclne p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
addeq \base, \base, #32*4 @ step over unused register space
#else
VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
cmp \tmp, #2 @ 32 x 64bit registers?
ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
ldcleq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31}
addne \base, \base, #32*4 @ step over unused register space
#endif
#endif
@ -53,13 +53,13 @@
ldr \tmp, =elf_hwcap @ may not have MVFR regs
ldr \tmp, [\tmp, #0]
tst \tmp, #HWCAP_VFPD32
stcnel p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
stclne p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
addeq \base, \base, #32*4 @ step over unused register space
#else
VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field
cmp \tmp, #2 @ 32 x 64bit registers?
stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
stcleq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31}
addne \base, \base, #32*4 @ step over unused register space
#endif
#endif

2
arch/arm/include/debug/tegra.S
View File

@ -173,7 +173,7 @@
.macro senduart, rd, rx
cmp \rx, #0
strneb \rd, [\rx, #UART_TX << UART_SHIFT]
strbne \rd, [\rx, #UART_TX << UART_SHIFT]
1001:
.endm

1
arch/arm/include/uapi/asm/Kbuild
View File

@ -1,5 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
include include/uapi/asm-generic/Kbuild.asm
generated-y += unistd-common.h
generated-y += unistd-oabi.h

2
arch/arm/kernel/debug.S
View File

@ -86,7 +86,7 @@ hexbuf_rel: .long hexbuf_addr - .
ENTRY(printascii)
addruart_current r3, r1, r2
1: teq r0, #0
ldrneb r1, [r0], #1
ldrbne r1, [r0], #1
teqne r1, #0
reteq lr
2: teq r1, #'\n'

12
arch/arm/kernel/entry-armv.S
View File

@ -636,7 +636,7 @@ call_fpe:
@ Test if we need to give access to iWMMXt coprocessors
ldr r5, [r10, #TI_FLAGS]
rsbs r7, r8, #(1 << 8) @ CP 0 or 1 only
movcss r7, r5, lsr #(TIF_USING_IWMMXT + 1)
movscs r7, r5, lsr #(TIF_USING_IWMMXT + 1)
bcs iwmmxt_task_enable
#endif
ARM( add pc, pc, r8, lsr #6 )
@ -872,7 +872,7 @@ __kuser_cmpxchg64: @ 0xffff0f60
smp_dmb arm
1: ldrexd r0, r1, [r2] @ load current val
eors r3, r0, r4 @ compare with oldval (1)
eoreqs r3, r1, r5 @ compare with oldval (2)
eorseq r3, r1, r5 @ compare with oldval (2)
strexdeq r3, r6, r7, [r2] @ store newval if eq
teqeq r3, #1 @ success?
beq 1b @ if no then retry
@ -896,8 +896,8 @@ __kuser_cmpxchg64: @ 0xffff0f60
ldmia r1, {r6, lr} @ load new val
1: ldmia r2, {r0, r1} @ load current val
eors r3, r0, r4 @ compare with oldval (1)
eoreqs r3, r1, r5 @ compare with oldval (2)
2: stmeqia r2, {r6, lr} @ store newval if eq
eorseq r3, r1, r5 @ compare with oldval (2)
2: stmiaeq r2, {r6, lr} @ store newval if eq
rsbs r0, r3, #0 @ set return val and C flag
ldmfd sp!, {r4, r5, r6, pc}
@ -911,7 +911,7 @@ kuser_cmpxchg64_fixup:
mov r7, #0xffff0fff
sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
subs r8, r4, r7
rsbcss r8, r8, #(2b - 1b)
rsbscs r8, r8, #(2b - 1b)
strcs r7, [sp, #S_PC]
#if __LINUX_ARM_ARCH__ < 6
bcc kuser_cmpxchg32_fixup
@ -969,7 +969,7 @@ kuser_cmpxchg32_fixup:
mov r7, #0xffff0fff
sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
subs r8, r4, r7
rsbcss r8, r8, #(2b - 1b)
rsbscs r8, r8, #(2b - 1b)
strcs r7, [sp, #S_PC]
ret lr
.previous

2
arch/arm/kernel/entry-common.S
View File

@ -373,7 +373,7 @@ sys_syscall:
movhs scno, #0
csdb
#endif
stmloia sp, {r5, r6} @ shuffle args
stmialo sp, {r5, r6} @ shuffle args
movlo r0, r1
movlo r1, r2
movlo r2, r3

11
arch/arm/kernel/entry-header.S
View File

@ -127,7 +127,8 @@
*/
.macro v7m_exception_slow_exit ret_r0
cpsid i
ldr lr, =EXC_RET_THREADMODE_PROCESSSTACK
ldr lr, =exc_ret
ldr lr, [lr]
@ read original r12, sp, lr, pc and xPSR
add r12, sp, #S_IP
@ -387,8 +388,8 @@
badr lr, \ret @ return address
.if \reload
add r1, sp, #S_R0 + S_OFF @ pointer to regs
ldmccia r1, {r0 - r6} @ reload r0-r6
stmccia sp, {r4, r5} @ update stack arguments
ldmiacc r1, {r0 - r6} @ reload r0-r6
stmiacc sp, {r4, r5} @ update stack arguments
.endif
ldrcc pc, [\table, \tmp, lsl #2] @ call sys_* routine
#else
@ -396,8 +397,8 @@
badr lr, \ret @ return address
.if \reload
add r1, sp, #S_R0 + S_OFF @ pointer to regs
ldmccia r1, {r0 - r6} @ reload r0-r6
stmccia sp, {r4, r5} @ update stack arguments
ldmiacc r1, {r0 - r6} @ reload r0-r6
stmiacc sp, {r4, r5} @ update stack arguments
.endif
ldrcc pc, [\table, \nr, lsl #2] @ call sys_* routine
#endif

4
arch/arm/kernel/entry-v7m.S
View File

@ -146,3 +146,7 @@ ENTRY(vector_table)
.rept CONFIG_CPU_V7M_NUM_IRQ
.long __irq_entry @ External Interrupts
.endr
.align 2
.globl exc_ret
exc_ret:
.space 4

4
arch/arm/kernel/head-nommu.S
View File

@ -439,8 +439,8 @@ M_CLASS(str r6, [r12, #PMSAv8_RLAR_A(3)])
str r5, [r12, #PMSAv8_RBAR_A(0)]
str r6, [r12, #PMSAv8_RLAR_A(0)]
#else
mcr p15, 0, r5, c6, c10, 1 @ PRBAR4
mcr p15, 0, r6, c6, c10, 2 @ PRLAR4
mcr p15, 0, r5, c6, c10, 0 @ PRBAR4
mcr p15, 0, r6, c6, c10, 1 @ PRLAR4
#endif
#endif
ret lr

4
arch/arm/kernel/hyp-stub.S
View File

@ -180,8 +180,8 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE
@ Check whether GICv3 system registers are available
mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1
ubfx r7, r7, #28, #4
cmp r7, #1
bne 2f
teq r7, #0
beq 2f
@ Enable system register accesses
mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE

5
arch/arm/kernel/machine_kexec.c
View File

@ -91,8 +91,11 @@ void machine_crash_nonpanic_core(void *unused)
set_cpu_online(smp_processor_id(), false);
atomic_dec(&waiting_for_crash_ipi);
while (1)
while (1) {
cpu_relax();
wfe();
}
}
void crash_smp_send_stop(void)

6
arch/arm/kernel/patch.c
View File

@ -16,7 +16,7 @@ struct patch {
unsigned int insn;
};
static DEFINE_SPINLOCK(patch_lock);
static DEFINE_RAW_SPINLOCK(patch_lock);
static void __kprobes *patch_map(void *addr, int fixmap, unsigned long *flags)
__acquires(&patch_lock)
@ -33,7 +33,7 @@ static void __kprobes *patch_map(void *addr, int fixmap, unsigned long *flags)
return addr;
if (flags)
spin_lock_irqsave(&patch_lock, *flags);
raw_spin_lock_irqsave(&patch_lock, *flags);
else
__acquire(&patch_lock);
@ -48,7 +48,7 @@ static void __kprobes patch_unmap(int fixmap, unsigned long *flags)
clear_fixmap(fixmap);
if (flags)
spin_unlock_irqrestore(&patch_lock, *flags);
raw_spin_unlock_irqrestore(&patch_lock, *flags);
else
__release(&patch_lock);
}

12
arch/arm/kernel/sleep.S
View File

@ -120,6 +120,14 @@ ENDPROC(cpu_resume_after_mmu)
.text
.align
#ifdef CONFIG_MCPM
.arm
THUMB( .thumb )
ENTRY(cpu_resume_no_hyp)
ARM_BE8(setend be) @ ensure we are in BE mode
b no_hyp
#endif
#ifdef CONFIG_MMU
.arm
ENTRY(cpu_resume_arm)
@ -135,6 +143,7 @@ ARM_BE8(setend be) @ ensure we are in BE mode
bl __hyp_stub_install_secondary
#endif
safe_svcmode_maskall r1
no_hyp:
mov r1, #0
ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
ALT_UP_B(1f)
@ -163,6 +172,9 @@ ENDPROC(cpu_resume)
#ifdef CONFIG_MMU
ENDPROC(cpu_resume_arm)
#endif
#ifdef CONFIG_MCPM
ENDPROC(cpu_resume_no_hyp)
#endif
.align 2

10
arch/arm/kernel/smp.c
View File

@ -62,12 +62,6 @@
*/
struct secondary_data secondary_data;
/*
* control for which core is the next to come out of the secondary
* boot "holding pen"
*/
volatile int pen_release = -1;
enum ipi_msg_type {
IPI_WAKEUP,
IPI_TIMER,
@ -604,8 +598,10 @@ static void ipi_cpu_stop(unsigned int cpu)
local_fiq_disable();
local_irq_disable();
while (1)
while (1) {
cpu_relax();
wfe();
}
}
static DEFINE_PER_CPU(struct completion *, cpu_completion);

66
arch/arm/kernel/smp_twd.c
View File

@ -100,8 +100,6 @@ static void twd_timer_stop(void)
disable_percpu_irq(clk->irq);
}
#ifdef CONFIG_COMMON_CLK
/*
* Updates clockevent frequency when the cpu frequency changes.
* Called on the cpu that is changing frequency with interrupts disabled.
@ -143,54 +141,6 @@ static int twd_clk_init(void)
}
core_initcall(twd_clk_init);
#elif defined (CONFIG_CPU_FREQ)
#include <linux/cpufreq.h>
/*
* Updates clockevent frequency when the cpu frequency changes.
* Called on the cpu that is changing frequency with interrupts disabled.
*/
static void twd_update_frequency(void *data)
{
twd_timer_rate = clk_get_rate(twd_clk);
clockevents_update_freq(raw_cpu_ptr(twd_evt), twd_timer_rate);
}
static int twd_cpufreq_transition(struct notifier_block *nb,
unsigned long state, void *data)
{
struct cpufreq_freqs *freqs = data;
/*
* The twd clock events must be reprogrammed to account for the new
* frequency. The timer is local to a cpu, so cross-call to the
* changing cpu.
*/
if (state == CPUFREQ_POSTCHANGE)
smp_call_function_single(freqs->cpu, twd_update_frequency,
NULL, 1);
return NOTIFY_OK;
}
static struct notifier_block twd_cpufreq_nb = {
.notifier_call = twd_cpufreq_transition,
};
static int twd_cpufreq_init(void)
{
if (twd_evt && raw_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
return cpufreq_register_notifier(&twd_cpufreq_nb,
CPUFREQ_TRANSITION_NOTIFIER);
return 0;
}
core_initcall(twd_cpufreq_init);
#endif
static void twd_calibrate_rate(void)
{
unsigned long count;
@ -366,21 +316,6 @@ out_free:
return err;
}
int __init twd_local_timer_register(struct twd_local_timer *tlt)
{
if (twd_base || twd_evt)
return -EBUSY;
twd_ppi = tlt->res[1].start;
twd_base = ioremap(tlt->res[0].start, resource_size(&tlt->res[0]));
if (!twd_base)
return -ENOMEM;
return twd_local_timer_common_register(NULL);
}
#ifdef CONFIG_OF
static int __init twd_local_timer_of_register(struct device_node *np)
{
int err;
@ -406,4 +341,3 @@ out:
TIMER_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
TIMER_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
TIMER_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
#endif

14
arch/arm/kernel/unwind.c
View File

@ -93,7 +93,7 @@ extern const struct unwind_idx __start_unwind_idx[];
static const struct unwind_idx *__origin_unwind_idx;
extern const struct unwind_idx __stop_unwind_idx[];
static DEFINE_SPINLOCK(unwind_lock);
static DEFINE_RAW_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);
/* Convert a prel31 symbol to an absolute address */
@ -201,7 +201,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
/* module unwind tables */
struct unwind_table *table;
spin_lock_irqsave(&unwind_lock, flags);
raw_spin_lock_irqsave(&unwind_lock, flags);
list_for_each_entry(table, &unwind_tables, list) {
if (addr >= table->begin_addr &&
addr < table->end_addr) {
@ -213,7 +213,7 @@ static const struct unwind_idx *unwind_find_idx(unsigned long addr)
break;
}
}
spin_unlock_irqrestore(&unwind_lock, flags);
raw_spin_unlock_irqrestore(&unwind_lock, flags);
}
pr_debug("%s: idx = %p\n", __func__, idx);
@ -529,9 +529,9 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;
spin_lock_irqsave(&unwind_lock, flags);
raw_spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
spin_unlock_irqrestore(&unwind_lock, flags);
raw_spin_unlock_irqrestore(&unwind_lock, flags);
return tab;
}
@ -543,9 +543,9 @@ void unwind_table_del(struct unwind_table *tab)
if (!tab)
return;
spin_lock_irqsave(&unwind_lock, flags);
raw_spin_lock_irqsave(&unwind_lock, flags);
list_del(&tab->list);
spin_unlock_irqrestore(&unwind_lock, flags);
raw_spin_unlock_irqrestore(&unwind_lock, flags);
kfree(tab);
}

5
arch/arm/kvm/Makefile
View File

@ -8,9 +8,8 @@ ifeq ($(plus_virt),+virt)
plus_virt_def := -DREQUIRES_VIRT=1
endif
ccflags-y += -Iarch/arm/kvm -Ivirt/kvm/arm/vgic
CFLAGS_arm.o := -I. $(plus_virt_def)
CFLAGS_mmu.o := -I.
ccflags-y += -I $(srctree)/$(src) -I $(srctree)/virt/kvm/arm/vgic
CFLAGS_arm.o := $(plus_virt_def)
AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt)
AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt)

23
arch/arm/kvm/coproc.c
View File

@ -293,15 +293,16 @@ static bool access_cntp_tval(struct kvm_vcpu *vcpu,
const struct coproc_params *p,
const struct coproc_reg *r)
{
u64 now = kvm_phys_timer_read();
u64 val;
u32 val;
if (p->is_write) {
val = *vcpu_reg(vcpu, p->Rt1);
kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL, val + now);
kvm_arm_timer_write_sysreg(vcpu,
TIMER_PTIMER, TIMER_REG_TVAL, val);
} else {
val = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL);
*vcpu_reg(vcpu, p->Rt1) = val - now;
val = kvm_arm_timer_read_sysreg(vcpu,
TIMER_PTIMER, TIMER_REG_TVAL);
*vcpu_reg(vcpu, p->Rt1) = val;
}
return true;
@ -315,9 +316,11 @@ static bool access_cntp_ctl(struct kvm_vcpu *vcpu,
if (p->is_write) {
val = *vcpu_reg(vcpu, p->Rt1);
kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CTL, val);
kvm_arm_timer_write_sysreg(vcpu,
TIMER_PTIMER, TIMER_REG_CTL, val);
} else {
val = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CTL);
val = kvm_arm_timer_read_sysreg(vcpu,
TIMER_PTIMER, TIMER_REG_CTL);
*vcpu_reg(vcpu, p->Rt1) = val;
}
@ -333,9 +336,11 @@ static bool access_cntp_cval(struct kvm_vcpu *vcpu,
if (p->is_write) {
val = (u64)*vcpu_reg(vcpu, p->Rt2) << 32;
val |= *vcpu_reg(vcpu, p->Rt1);
kvm_arm_timer_set_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL, val);
kvm_arm_timer_write_sysreg(vcpu,
TIMER_PTIMER, TIMER_REG_CVAL, val);
} else {
val = kvm_arm_timer_get_reg(vcpu, KVM_REG_ARM_PTIMER_CVAL);
val = kvm_arm_timer_read_sysreg(vcpu,
TIMER_PTIMER, TIMER_REG_CVAL);
*vcpu_reg(vcpu, p->Rt1) = val;
*vcpu_reg(vcpu, p->Rt2) = val >> 32;
}

1
arch/arm/kvm/hyp/cp15-sr.c
View File

@ -27,7 +27,6 @@ static u64 *cp15_64(struct kvm_cpu_context *ctxt, int idx)
void __hyp_text __sysreg_save_state(struct kvm_cpu_context *ctxt)
{
ctxt->cp15[c0_MPIDR] = read_sysreg(VMPIDR);
ctxt->cp15[c0_CSSELR] = read_sysreg(CSSELR);
ctxt->cp15[c1_SCTLR] = read_sysreg(SCTLR);
ctxt->cp15[c1_CPACR] = read_sysreg(CPACR);

2
arch/arm/kvm/hyp/hyp-entry.S
View File

@ -176,7 +176,7 @@ THUMB( orr lr, lr, #PSR_T_BIT )
msr spsr_cxsf, lr
ldr lr, =panic
msr ELR_hyp, lr
ldr lr, =kvm_call_hyp
ldr lr, =__kvm_call_hyp
clrex
eret
ENDPROC(__hyp_do_panic)

2
arch/arm/kvm/hyp/switch.c
View File

@ -77,7 +77,7 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
static void __hyp_text __activate_vm(struct kvm_vcpu *vcpu)
{
struct kvm *kvm = kern_hyp_va(vcpu->kvm);
write_sysreg(kvm->arch.vttbr, VTTBR);
write_sysreg(kvm_get_vttbr(kvm), VTTBR);
write_sysreg(vcpu->arch.midr, VPIDR);
}

4
arch/arm/kvm/hyp/tlb.c
View File

@ -41,7 +41,7 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
/* Switch to requested VMID */
kvm = kern_hyp_va(kvm);
write_sysreg(kvm->arch.vttbr, VTTBR);
write_sysreg(kvm_get_vttbr(kvm), VTTBR);
isb();
write_sysreg(0, TLBIALLIS);
@ -61,7 +61,7 @@ void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
/* Switch to requested VMID */
write_sysreg(kvm->arch.vttbr, VTTBR);
write_sysreg(kvm_get_vttbr(kvm), VTTBR);
isb();
write_sysreg(0, TLBIALL);

4
arch/arm/kvm/interrupts.S
View File

@ -42,7 +42,7 @@
* r12: caller save
* rest: callee save
*/
ENTRY(kvm_call_hyp)
ENTRY(__kvm_call_hyp)
hvc #0
bx lr
ENDPROC(kvm_call_hyp)
ENDPROC(__kvm_call_hyp)

2
arch/arm/lib/Makefile
View File

@ -39,7 +39,7 @@ $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S
$(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S
ifeq ($(CONFIG_KERNEL_MODE_NEON),y)
NEON_FLAGS := -mfloat-abi=softfp -mfpu=neon
NEON_FLAGS := -march=armv7-a -mfloat-abi=softfp -mfpu=neon
CFLAGS_xor-neon.o += $(NEON_FLAGS)
obj-$(CONFIG_XOR_BLOCKS) += xor-neon.o
endif

8
arch/arm/lib/bitops.h
View File

@ -7,7 +7,7 @@
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
strbne r1, [ip] @ assert word-aligned
mov r2, #1
and r3, r0, #31 @ Get bit offset
mov r0, r0, lsr #5
@ -32,7 +32,7 @@ ENDPROC(\name )
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
strbne r1, [ip] @ assert word-aligned
mov r2, #1
and r3, r0, #31 @ Get bit offset
mov r0, r0, lsr #5
@ -62,7 +62,7 @@ ENDPROC(\name )
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
strbne r1, [ip] @ assert word-aligned
and r2, r0, #31
mov r0, r0, lsr #5
mov r3, #1
@ -89,7 +89,7 @@ ENDPROC(\name )
ENTRY( \name )
UNWIND( .fnstart )
ands ip, r1, #3
strneb r1, [ip] @ assert word-aligned
strbne r1, [ip] @ assert word-aligned
and r3, r0, #31
mov r0, r0, lsr #5
save_and_disable_irqs ip

2
arch/arm/lib/clear_user.S
View File

@ -44,7 +44,7 @@ UNWIND(.save {r1, lr})
strusr r2, r0, 1, ne, rept=2
tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1
it ne @ explicit IT needed for the label
USER( strnebt r2, [r0])
USER( strbtne r2, [r0])
mov r0, #0
ldmfd sp!, {r1, pc}
UNWIND(.fnend)

2
arch/arm/lib/copy_from_user.S
View File

@ -91,7 +91,7 @@
.endm
.macro str1b ptr reg cond=al abort
str\cond\()b \reg, [\ptr], #1
strb\cond \reg, [\ptr], #1
.endm
.macro enter reg1 reg2

4
arch/arm/lib/copy_page.S
View File

@ -39,9 +39,9 @@ ENTRY(copy_page)
.endr
subs r2, r2, #1 @ 1
stmia r0!, {r3, r4, ip, lr} @ 4
ldmgtia r1!, {r3, r4, ip, lr} @ 4
ldmiagt r1!, {r3, r4, ip, lr} @ 4
bgt 1b @ 1
PLD( ldmeqia r1!, {r3, r4, ip, lr} )
PLD( ldmiaeq r1!, {r3, r4, ip, lr} )
PLD( beq 2b )
ldmfd sp!, {r4, pc} @ 3
ENDPROC(copy_page)

Some files were not shown because too many files have changed in this diff Show More