mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-14 21:01:29 +00:00
i2c: Convert the pca9539 driver to a new-style i2c driver
The new-style pca9539 driver implements the optional detect() callback to cover the use cases of the legacy driver. Warning: users will now have to use the force module parameter to get the driver to attach to their device. That's not a bad thing as these devices can't be detected anyway. Note that this doesn't change the fact that this driver is deprecated in favor of gpio/pca953x. Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
parent
97addff6de
commit
3d63430a26
@ -7,7 +7,7 @@ drivers/gpio/pca9539.c instead.
|
||||
Supported chips:
|
||||
* Philips PCA9539
|
||||
Prefix: 'pca9539'
|
||||
Addresses scanned: 0x74 - 0x77
|
||||
Addresses scanned: none
|
||||
Datasheet:
|
||||
http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf
|
||||
|
||||
@ -23,6 +23,14 @@ The input sense can also be inverted.
|
||||
The 16 lines are split between two bytes.
|
||||
|
||||
|
||||
Detection
|
||||
---------
|
||||
|
||||
The PCA9539 is difficult to detect and not commonly found in PC machines,
|
||||
so you have to pass the I2C bus and address of the installed PCA9539
|
||||
devices explicitly to the driver at load time via the force=... parameter.
|
||||
|
||||
|
||||
Sysfs entries
|
||||
-------------
|
||||
|
||||
|
@ -14,8 +14,8 @@
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/hwmon-sysfs.h>
|
||||
|
||||
/* Addresses to scan */
|
||||
static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END};
|
||||
/* Addresses to scan: none, device is not autodetected */
|
||||
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
|
||||
|
||||
/* Insmod parameters */
|
||||
I2C_CLIENT_INSMOD_1(pca9539);
|
||||
@ -32,23 +32,6 @@ enum pca9539_cmd
|
||||
PCA9539_DIRECTION_1 = 7,
|
||||
};
|
||||
|
||||
static int pca9539_attach_adapter(struct i2c_adapter *adapter);
|
||||
static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind);
|
||||
static int pca9539_detach_client(struct i2c_client *client);
|
||||
|
||||
/* This is the driver that will be inserted */
|
||||
static struct i2c_driver pca9539_driver = {
|
||||
.driver = {
|
||||
.name = "pca9539",
|
||||
},
|
||||
.attach_adapter = pca9539_attach_adapter,
|
||||
.detach_client = pca9539_detach_client,
|
||||
};
|
||||
|
||||
struct pca9539_data {
|
||||
struct i2c_client client;
|
||||
};
|
||||
|
||||
/* following are the sysfs callback functions */
|
||||
static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr,
|
||||
char *buf)
|
||||
@ -105,77 +88,51 @@ static struct attribute_group pca9539_defattr_group = {
|
||||
.attrs = pca9539_attributes,
|
||||
};
|
||||
|
||||
static int pca9539_attach_adapter(struct i2c_adapter *adapter)
|
||||
/* Return 0 if detection is successful, -ENODEV otherwise */
|
||||
static int pca9539_detect(struct i2c_client *client, int kind,
|
||||
struct i2c_board_info *info)
|
||||
{
|
||||
return i2c_probe(adapter, &addr_data, pca9539_detect);
|
||||
}
|
||||
|
||||
/* This function is called by i2c_probe */
|
||||
static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind)
|
||||
{
|
||||
struct i2c_client *client;
|
||||
struct pca9539_data *data;
|
||||
int err = 0;
|
||||
struct i2c_adapter *adapter = client->adapter;
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
||||
goto exit;
|
||||
return -ENODEV;
|
||||
|
||||
/* OK. For now, we presume we have a valid client. We now create the
|
||||
client structure, even though we cannot fill it completely yet. */
|
||||
if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) {
|
||||
err = -ENOMEM;
|
||||
goto exit;
|
||||
}
|
||||
|
||||
client = &data->client;
|
||||
i2c_set_clientdata(client, data);
|
||||
client->addr = address;
|
||||
client->adapter = adapter;
|
||||
client->driver = &pca9539_driver;
|
||||
|
||||
if (kind < 0) {
|
||||
/* Detection: the pca9539 only has 8 registers (0-7).
|
||||
A read of 7 should succeed, but a read of 8 should fail. */
|
||||
if ((i2c_smbus_read_byte_data(client, 7) < 0) ||
|
||||
(i2c_smbus_read_byte_data(client, 8) >= 0))
|
||||
goto exit_kfree;
|
||||
}
|
||||
|
||||
strlcpy(client->name, "pca9539", I2C_NAME_SIZE);
|
||||
|
||||
/* Tell the I2C layer a new client has arrived */
|
||||
if ((err = i2c_attach_client(client)))
|
||||
goto exit_kfree;
|
||||
|
||||
/* Register sysfs hooks */
|
||||
err = sysfs_create_group(&client->dev.kobj,
|
||||
&pca9539_defattr_group);
|
||||
if (err)
|
||||
goto exit_detach;
|
||||
strlcpy(info->type, "pca9539", I2C_NAME_SIZE);
|
||||
|
||||
return 0;
|
||||
|
||||
exit_detach:
|
||||
i2c_detach_client(client);
|
||||
exit_kfree:
|
||||
kfree(data);
|
||||
exit:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int pca9539_detach_client(struct i2c_client *client)
|
||||
static int pca9539_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
int err;
|
||||
/* Register sysfs hooks */
|
||||
return sysfs_create_group(&client->dev.kobj,
|
||||
&pca9539_defattr_group);
|
||||
}
|
||||
|
||||
static int pca9539_remove(struct i2c_client *client)
|
||||
{
|
||||
sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group);
|
||||
|
||||
if ((err = i2c_detach_client(client)))
|
||||
return err;
|
||||
|
||||
kfree(i2c_get_clientdata(client));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id pca9539_id[] = {
|
||||
{ "pca9539", 0 },
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct i2c_driver pca9539_driver = {
|
||||
.driver = {
|
||||
.name = "pca9539",
|
||||
},
|
||||
.probe = pca9539_probe,
|
||||
.remove = pca9539_remove,
|
||||
.id_table = pca9539_id,
|
||||
|
||||
.detect = pca9539_detect,
|
||||
.address_data = &addr_data,
|
||||
};
|
||||
|
||||
static int __init pca9539_init(void)
|
||||
{
|
||||
return i2c_add_driver(&pca9539_driver);
|
||||
|
Loading…
Reference in New Issue
Block a user