Merge branch 'upstream-fixes' into upstream

Conflicts: drivers/scsi/libata-core.c
2025-02-04 10:09:06 +00:00 · 2006-05-20 00:36:08 -04:00 · 2006-05-20 00:36:08 -04:00 · 3d71b3b0b6
commit 3d71b3b0b6
parent 8d4ee71ff6 e2a7f77a7b
143 changed files with 3292 additions and 834 deletions
--- a/9
+++ b/9
@ -3241,14 +3241,9 @@ S: 12725 SW Millikan Way, Suite 400
 S: Beaverton, Oregon 97005
 S: USA

-N: Marcelo W. Tosatti
-E: marcelo.tosatti@cyclades.com
-D: Miscellaneous kernel hacker
+N: Marcelo Tosatti
+E: marcelo@kvack.org
 D: v2.4 kernel maintainer
-D: Current pc300/cyclades maintainer
-S: Cyclades Corporation
-S: Av Cristovao Colombo, 462. Floresta.
-S: Porto Alegre
 S: Brazil

 N: Stefan Traby
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@ -1721,11 +1721,6 @@ Your cooperation is appreciated.
 		These devices support the same API as the generic SCSI
 		devices.

- 97 block	Packet writing for CD/DVD devices
-		  0 = /dev/pktcdvd0	First packet-writing module
-		  1 = /dev/pktcdvd1	Second packet-writing module
-		    ...
-
 98 char	Control and Measurement Device (comedi)
 		  0 = /dev/comedi0	First comedi device
 		  1 = /dev/comedi1	Second comedi device
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@ -57,6 +57,15 @@ Who:	Jody McIntyre <scjody@steamballoon.com>

 ---------------------------

+What:	sbp2: module parameter "force_inquiry_hack"
+When:	July 2006
+Why:	Superceded by parameter "workarounds". Both parameters are meant to be
+	used ad-hoc and for single devices only, i.e. not in modprobe.conf,
+	therefore the impact of this feature replacement should be low.
+Who:	Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+---------------------------
+
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:	July 2006
 Why:	V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@ -1031,7 +1031,7 @@ conflict on any particular lock.
 LOCKS VS MEMORY ACCESSES
 ------------------------

-Consider the following: the system has a pair of spinlocks (N) and (Q), and
+Consider the following: the system has a pair of spinlocks (M) and (Q), and
 three CPUs; then should the following sequence of events occur:

 	CPU 1				CPU 2
@ -1678,7 +1678,7 @@ CPU's caches by some other cache event:
 	smp_wmb();
 	<A:modify v=2>	<C:busy>
 			<C:queue v=2>
-	p = &b;		q = p;
+	p = &v;		q = p;
 			<D:request p>
 	<B:modify p=&v>	<D:commit p=&v>
 		  	<D:read p>
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@ -0,0 +1,234 @@
+PXA2xx SPI on SSP driver HOWTO
+===================================================
+This a mini howto on the pxa2xx_spi driver.  The driver turns a PXA2xx
+synchronous serial port into a SPI master controller
+(see Documentation/spi/spi_summary). The driver has the following features
+
+- Support for any PXA2xx SSP
+- SSP PIO and SSP DMA data transfers.
+- External and Internal (SSPFRM) chip selects.
+- Per slave device (chip) configuration.
+- Full suspend, freeze, resume support.
+
+The driver is built around a "spi_message" fifo serviced by workqueue and a
+tasklet. The workqueue, "pump_messages", drives message fifo and the tasklet
+(pump_transfer) is responsible for queuing SPI transactions and setting up and
+launching the dma/interrupt driven transfers.
+
+Declaring PXA2xx Master Controllers
+-----------------------------------
+Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
+"platform device".  The master configuration is passed to the driver via a table
+found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+
+struct pxa2xx_spi_master {
+	enum pxa_ssp_type ssp_type;
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+The "pxa2xx_spi_master.ssp_type" field must have a value between 1 and 3 and
+informs the driver which features a particular SSP supports.
+
+The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the
+corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See
+the "PXA2xx Developer Manual" section "Clocks and Power Management".
+
+The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
+slave device (chips) attached to this SPI master.
+
+The "pxa2xx_spi_master.enable_dma" field informs the driver that SSP DMA should
+be used.  This caused the driver to acquire two DMA channels: rx_channel and
+tx_channel.  The rx_channel has a higher DMA service priority the tx_channel.
+See the "PXA2xx Developer Manual" section "DMA Controller".
+
+NSSP MASTER SAMPLE
+------------------
+Below is a sample configuration using the PXA255 NSSP.
+
+static struct resource pxa_spi_nssp_resources[] = {
+	[0] = {
+		.start	= __PREG(SSCR0_P(2)), /* Start address of NSSP */
+		.end	= __PREG(SSCR0_P(2)) + 0x2c, /* Range of registers */
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NSSP, /* NSSP IRQ */
+		.end	= IRQ_NSSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct pxa2xx_spi_master pxa_nssp_master_info = {
+	.ssp_type = PXA25x_NSSP, /* Type of SSP */
+	.clock_enable = CKEN9_NSSP, /* NSSP Peripheral clock */
+	.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
+	.enable_dma = 1, /* Enables NSSP DMA */
+};
+
+static struct platform_device pxa_spi_nssp = {
+	.name = "pxa2xx-spi", /* MUST BE THIS VALUE, so device match driver */
+	.id = 2, /* Bus number, MUST MATCH SSP number 1..n */
+	.resource = pxa_spi_nssp_resources,
+	.num_resources = ARRAY_SIZE(pxa_spi_nssp_resources),
+	.dev = {
+		.platform_data = &pxa_nssp_master_info, /* Passed to driver */
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&pxa_spi_nssp,
+};
+
+static void __init board_init(void)
+{
+	(void)platform_add_device(devices, ARRAY_SIZE(devices));
+}
+
+Declaring Slave Devices
+-----------------------
+Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c
+using the "spi_board_info" structure found in "linux/spi/spi.h". See
+"Documentation/spi/spi_summary" for additional information.
+
+Each slave device attached to the PXA must provide slave specific configuration
+information via the structure "pxa2xx_spi_chip" found in
+"include/asm-arm/arch-pxa/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+will uses the configuration whenever the driver communicates with the slave
+device.
+
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout_microsecs;
+	u8 enable_loopback;
+	void (*cs_control)(u32 command);
+};
+
+The "pxa2xx_spi_chip.tx_threshold" and "pxa2xx_spi_chip.rx_threshold" fields are
+used to configure the SSP hardware fifo.  These fields are critical to the
+performance of pxa2xx_spi driver and misconfiguration will result in rx
+fifo overruns (especially in PIO mode transfers). Good default values are
+
+	.tx_threshold = 12,
+	.rx_threshold = 4,
+
+The "pxa2xx_spi_chip.dma_burst_size" field is used to configure PXA2xx DMA
+engine and is related the "spi_device.bits_per_word" field.  Read and understand
+the PXA2xx "Developer Manual" sections on the DMA controller and SSP Controllers
+to determine the correct value. An SSP configured for byte-wide transfers would
+use a value of 8.
+
+The "pxa2xx_spi_chip.timeout_microsecs" fields is used to efficiently handle
+trailing bytes in the SSP receiver fifo.  The correct value for this field is
+dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific
+slave device.  Please note the the PXA2xx SSP 1 does not support trailing byte
+timeouts and must busy-wait any trailing bytes.
+
+The "pxa2xx_spi_chip.enable_loopback" field is used to place the SSP porting
+into internal loopback mode.  In this mode the SSP controller internally
+connects the SSPTX pin the the SSPRX pin.  This is useful for initial setup
+testing.
+
+The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific
+function for asserting/deasserting a slave device chip select.  If the field is
+NULL, the pxa2xx_spi master controller driver assumes that the SSP port is
+configured to use SSPFRM instead.
+
+NSSP SALVE SAMPLE
+-----------------
+The pxa2xx_spi_chip structure is passed to the pxa2xx_spi driver in the
+"spi_board_info.controller_data" field. Below is a sample configuration using
+the PXA255 NSSP.
+
+/* Chip Select control for the CS8415A SPI slave device */
+static void cs8415a_cs_control(u32 command)
+{
+	if (command & PXA2XX_CS_ASSERT)
+		GPCR(2) = GPIO_bit(2);
+	else
+		GPSR(2) = GPIO_bit(2);
+}
+
+/* Chip Select control for the CS8405A SPI slave device */
+static void cs8405a_cs_control(u32 command)
+{
+	if (command & PXA2XX_CS_ASSERT)
+		GPCR(3) = GPIO_bit(3);
+	else
+		GPSR(3) = GPIO_bit(3);
+}
+
+static struct pxa2xx_spi_chip cs8415a_chip_info = {
+	.tx_threshold = 12, /* SSP hardward FIFO threshold */
+	.rx_threshold = 4, /* SSP hardward FIFO threshold */
+	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
+	.timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+	.cs_control = cs8415a_cs_control, /* Use external chip select */
+};
+
+static struct pxa2xx_spi_chip cs8405a_chip_info = {
+	.tx_threshold = 12, /* SSP hardward FIFO threshold */
+	.rx_threshold = 4, /* SSP hardward FIFO threshold */
+	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
+	.timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+	.cs_control = cs8405a_cs_control, /* Use external chip select */
+};
+
+static struct spi_board_info streetracer_spi_board_info[] __initdata = {
+	{
+		.modalias = "cs8415a", /* Name of spi_driver for this device */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.bus_num = 2, /* Framework bus number */
+		.chip_select = 0, /* Framework chip select */
+		.platform_data = NULL; /* No spi_driver specific config */
+		.controller_data = &cs8415a_chip_info, /* Master chip config */
+		.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
+	},
+	{
+		.modalias = "cs8405a", /* Name of spi_driver for this device */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.bus_num = 2, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select */
+		.controller_data = &cs8405a_chip_info, /* Master chip config */
+		.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
+	},
+};
+
+static void __init streetracer_init(void)
+{
+	spi_register_board_info(streetracer_spi_board_info,
+				ARRAY_SIZE(streetracer_spi_board_info));
+}
+
+
+DMA and PIO I/O Support
+-----------------------
+The pxa2xx_spi driver support both DMA and interrupt driven PIO message
+transfers.  The driver defaults to PIO mode and DMA transfers must enabled by
+setting the "enable_dma" flag in the "pxa2xx_spi_master" structure and and
+ensuring that the "pxa2xx_spi_chip.dma_burst_size" field is non-zero.  The DMA
+mode support both coherent and stream based DMA mappings.
+
+The following logic is used to determine the type of I/O to be used on
+a per "spi_transfer" basis:
+
+if !enable_dma or dma_burst_size == 0 then
+	always use PIO transfers
+
+if spi_message.is_dma_mapped and rx_dma_buf != 0 and tx_dma_buf != 0 then
+	use coherent DMA mode
+
+if rx_buf and tx_buf are aligned on 8 byte boundary then
+	use streaming DMA mode
+
+otherwise
+	use PIO transfer
+
+THANKS TO
+---------
+
+David Brownell and others for mentoring the development of this driver.
+
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@ -414,7 +414,33 @@ to get the driver-private data allocated for that device.
 The driver will initialize the fields of that spi_master, including the
 bus number (maybe the same as the platform device ID) and three methods
 used to interact with the SPI core and SPI protocol drivers.  It will
-also initialize its own internal state.
+also initialize its own internal state.  (See below about bus numbering
+and those methods.)
+
+After you initialize the spi_master, then use spi_register_master() to
+publish it to the rest of the system.  At that time, device nodes for
+the controller and any predeclared spi devices will be made available,
+and the driver model core will take care of binding them to drivers.
+
+If you need to remove your SPI controller driver, spi_unregister_master()
+will reverse the effect of spi_register_master().
+
+
+BUS NUMBERING
+
+Bus numbering is important, since that's how Linux identifies a given
+SPI bus (shared SCK, MOSI, MISO).  Valid bus numbers start at zero.  On
+SOC systems, the bus numbers should match the numbers defined by the chip
+manufacturer.  For example, hardware controller SPI2 would be bus number 2,
+and spi_board_info for devices connected to it would use that number.
+
+If you don't have such hardware-assigned bus number, and for some reason
+you can't just assign them, then provide a negative bus number.  That will
+then be replaced by a dynamically assigned number. You'd then need to treat
+this as a non-static configuration (see above).
+
+
+SPI MASTER METHODS

    master->setup(struct spi_device *spi)
 	This sets up the device clock rate, SPI mode, and word sizes.
@ -431,6 +457,9 @@ also initialize its own internal state.
 	state it dynamically associates with that device.  If you do that,
 	be sure to provide the cleanup() method to free that state.

+
+SPI MESSAGE QUEUE
+
 The bulk of the driver will be managing the I/O queue fed by transfer().

 That queue could be purely conceptual.  For example, a driver used only
@ -440,6 +469,9 @@ But the queue will probably be very real, using message->queue, PIO,
 often DMA (especially if the root filesystem is in SPI flash), and
 execution contexts like IRQ handlers, tasklets, or workqueues (such
 as keventd).  Your driver can be as fancy, or as simple, as you need.
+Such a transfer() method would normally just add the message to a
+queue, and then start some asynchronous transfer engine (unless it's
+already running).


 THANKS TO
--- a/Documentation/watchdog/watchdog-api.txt
+++ b/Documentation/watchdog/watchdog-api.txt
@ -36,6 +36,9 @@ timeout or margin.  The simplest way to ping the watchdog is to write
 some data to the device.  So a very simple watchdog daemon would look
 like this:

+#include <stdlib.h>
+#include <fcntl.h>
+
 int main(int argc, const char *argv[]) {
 	int fd=open("/dev/watchdog",O_WRONLY);
 	if (fd==-1) {
--- a/13
+++ b/13
@ -1603,6 +1603,11 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained

+LED SUBSYSTEM
+P:	Richard Purdie
+M:	rpurdie@rpsys.net
+S:	Maintained
+
 LEGO USB Tower driver
 P:	Juergen Stuber
 M:	starblue@users.sourceforge.net
@ -1662,7 +1667,7 @@ S:	Maintained

 LINUX FOR POWERPC EMBEDDED PPC8XX
 P:	Marcelo Tosatti
-M:	marcelo.tosatti@cyclades.com
+M:	marcelo@kvack.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
@ -2513,6 +2518,12 @@ M:	perex@suse.cz
 L:	alsa-devel@alsa-project.org
 S:	Maintained

+SPI SUBSYSTEM
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	spi-devel-general@lists.sourceforge.net
+S:	Maintained
+
 TPM DEVICE DRIVER
 P:	Kylene Hall
 M:	kjhall@us.ibm.com
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@ -99,6 +99,8 @@ int main(void)
  DEFINE(MACHINFO_NAME,		offsetof(struct machine_desc, name));
  DEFINE(MACHINFO_PHYSIO,	offsetof(struct machine_desc, phys_io));
  DEFINE(MACHINFO_PGOFFIO,	offsetof(struct machine_desc, io_pg_offst));
+  BLANK();
+  DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
  DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
  DEFINE(PROCINFO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mmu_flags));
  return 0; 
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@ -143,12 +143,23 @@ static struct dma_ops isa_dma_ops = {
 	.residue	= isa_get_dma_residue,
 };

-static struct resource dma_resources[] = {
-	{ "dma1",		0x0000, 0x000f },
-	{ "dma low page", 	0x0080, 0x008f },
-	{ "dma2",		0x00c0, 0x00df },
-	{ "dma high page",	0x0480, 0x048f }
-};
+static struct resource dma_resources[] = { {
+	.name	= "dma1",
+	.start	= 0x0000,
+	.end	= 0x000f
+}, {
+	.name	= "dma low page",
+	.start	= 0x0080,
+	.end 	= 0x008f
+}, {
+	.name	= "dma2",
+	.start	= 0x00c0,
+	.end	= 0x00df
+}, {
+	.name	= "dma high page",
+	.start	= 0x0480,
+	.end	= 0x048f
+} };

 void __init isa_init_dma(dma_t *dma)
 {
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@ -311,7 +311,7 @@ void free_thread_info(struct thread_info *thread)
 		struct thread_info_list *th = &get_cpu_var(thread_info_list);
 		if (th->nr < EXTRA_TASK_STRUCT) {
 			unsigned long *p = (unsigned long *)thread;
-			p[0] = th->head;
+			p[0] = (unsigned long)th->head;
 			th->head = p;
 			th->nr += 1;
 			put_cpu_var(thread_info_list);
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@ -122,7 +122,7 @@ ENTRY(c_backtrace)
 #define reg   r5
 #define stack r6

-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
+.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, r8, lr}
 		mov	stack, r0
 		mov	instr, r1
 		mov	reg, #9
@ -145,7 +145,7 @@ ENTRY(c_backtrace)
 		adrne	r0, .Lcr
 		blne	printk
 		mov	r0, stack
-		LOADREGS(fd, sp!, {instr, reg, stack, r7, pc})
+		LOADREGS(fd, sp!, {instr, reg, stack, r7, r8, pc})

 .Lfp:		.asciz	" r%d = %08X%c"
 .Lcr:		.asciz	"\n"
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@ -189,12 +189,12 @@ ENTRY(__do_div64)
 	moveq	pc, lr

 	@ Division by 0:
-	str	lr, [sp, #-4]!
+	str	lr, [sp, #-8]!
 	bl	__div0

 	@ as wrong as it could be...
 	mov	yl, #0
 	mov	yh, #0
 	mov	xh, #0
-	ldr	pc, [sp], #4
+	ldr	pc, [sp], #8

--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@ -95,7 +95,10 @@ static void __init mainstone_init_irq(void)
 	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
 		set_irq_chip(irq, &mainstone_irq_chip);
 		set_irq_handler(irq, do_level_IRQ);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
+		else
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_flags(MAINSTONE_IRQ(8), 0);
 	set_irq_flags(MAINSTONE_IRQ(12), 0);
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@ -137,8 +137,11 @@ static struct amba_device *amba_devs[] __initdata = {
 static void __init gic_init_irq(void)
 {
 #ifdef CONFIG_REALVIEW_MPCORE
+	unsigned int pldctrl;
 	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ 0xd8);
+	pldctrl |= 0x00800000;	/* New irq mode */
+	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 #endif
 	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
 	mrc	p15, 0, r5, c13, c0, 0	@ PID
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c2, c0, 0	@ auxiliary control register
-	mrc	p15, 0, r9, c1, c0, 0	@ control register
+	mrc	p15, 0, r8, c1, c0, 0	@ control register

 	stmia	r0, { r4 - r13 }

@ -165,7 +164,6 @@ ENTRY(s3c2410_cpu_resume)
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
 	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-	mcr	p15, 0, r8, c1, c1, 0		@ auxilliary control

 #ifdef CONFIG_DEBUG_RESUME
 	mov	r3, #'R'
@ -173,7 +171,7 @@ ENTRY(s3c2410_cpu_resume)
 #endif

 	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
+	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
 	nop					@ second-to-last before mmu
 	mov	pc, r2				@ go back to virtual address

--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@ -141,7 +141,7 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
 		return NULL;
 	addr = (unsigned long)area->addr;
 	if (remap_area_pages(addr, pfn, size, flags)) {
- 		vfree((void *)addr);
+ 		vunmap((void *)addr);
 		return NULL;
 	}
 	return (void __iomem *) (offset + (char *)addr);
@ -173,7 +173,7 @@ EXPORT_SYMBOL(__ioremap);

 void __iounmap(void __iomem *addr)
 {
-	vfree((void *) (PAGE_MASK & (unsigned long) addr));
+	vunmap((void *)(PAGE_MASK & (unsigned long)addr));
 }
 EXPORT_SYMBOL(__iounmap);

--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@ -758,10 +758,10 @@ config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
 	---help---
-	  Say Y here to experiment with turning CPUs off and on.  CPUs
-	  can be controlled through /sys/devices/system/cpu.
+	  Say Y here to experiment with turning CPUs off and on, and to
+	  enable suspend on SMP systems. CPUs can be controlled through
+	  /sys/devices/system/cpu.

-	  Say N.

 endmenu

--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@ -1066,6 +1066,14 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	{
+	 .callback = disable_acpi_pci,
+	 .ident = "HP xw9300",
+	 .matches = {
+		    DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		    DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
+		    },
+	},
 	{}
 };

--- a/arch/i386/oprofile/nmi_int.c
+++ b/arch/i386/oprofile/nmi_int.c
@ -332,10 +332,11 @@ static int __init ppro_init(char ** cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;

-	if (cpu_model > 0xd)
+	if (cpu_model == 14)
+		*cpu_type = "i386/core";
+	else if (cpu_model > 0xd)
 		return 0;
-
-	if (cpu_model == 9) {
+	else if (cpu_model == 9) {
 		*cpu_type = "i386/p6_mobile";
 	} else if (cpu_model > 5) {
 		*cpu_type = "i386/piii";
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@ -134,7 +134,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=8
+CONFIG_NODES_SHIFT=10
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
@ -1159,7 +1159,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@ -416,7 +416,7 @@ iosapic_end_level_irq (unsigned int irq)
 	ia64_vector vec = irq_to_vector(irq);
 	struct iosapic_rte_info *rte;

-	move_irq(irq);
+	move_native_irq(irq);
 	list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list)
 		iosapic_eoi(rte->addr, vec);
 }
@ -458,7 +458,7 @@ iosapic_ack_edge_irq (unsigned int irq)
 {
 	irq_desc_t *idesc = irq_descp(irq);

-	move_irq(irq);
+	move_native_irq(irq);
 	/*
 	 * Once we have recorded IRQ_PENDING already, we can mask the
 	 * interrupt for real. This prevents IRQ storms from unhandled
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@ -101,7 +101,6 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir)

 	if (irq < NR_IRQS) {
 		irq_affinity[irq] = mask;
-		set_irq_info(irq, mask);
 		irq_redir[irq] = (char) (redir & 0xff);
 	}
 }
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@ -1636,7 +1636,7 @@ static int __init prom_find_machine_type(void)
 			   compat, sizeof(compat)-1);
 	if (len <= 0)
 		return PLATFORM_GENERIC;
-	if (strncmp(compat, RELOC("chrp"), 4))
+	if (strcmp(compat, RELOC("chrp")))
 		return PLATFORM_GENERIC;

 	/* Default to pSeries. We need to know if we are running LPAR */
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@ -255,7 +255,7 @@ static int __init pSeries_init_panel(void)
 {
 	/* Manually leave the kernel version on the panel. */
 	ppc_md.progress("Linux ppc64\n", 0);
-	ppc_md.progress(system_utsname.version, 0);
+	ppc_md.progress(system_utsname.release, 0);

 	return 0;
 }
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@ -1650,3 +1650,11 @@ sys_tee_wrapper:
 	llgfr	%r4,%r4			# size_t
 	llgfr	%r5,%r5			# unsigned int
 	jg	sys_tee
+
+	.globl compat_sys_vmsplice_wrapper
+compat_sys_vmsplice_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned int
+	llgfr	%r5,%r5			# unsigned int
+	jg	compat_sys_vmsplice
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@ -317,3 +317,4 @@ SYSCALL(sys_get_robust_list,sys_get_robust_list,compat_sys_get_robust_list_wrapp
 SYSCALL(sys_splice,sys_splice,sys_splice_wrapper)
 SYSCALL(sys_sync_file_range,sys_sync_file_range,sys_sync_file_range_wrapper)
 SYSCALL(sys_tee,sys_tee,sys_tee_wrapper)
+SYSCALL(sys_vmsplice,sys_vmsplice,compat_sys_vmsplice_wrapper)
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@ -249,18 +249,19 @@ static inline void stop_hz_timer(void)
 	unsigned long flags;
 	unsigned long seq, next;
 	__u64 timer, todval;
+	int cpu = smp_processor_id();

 	if (sysctl_hz_timer != 0)
 		return;

-	cpu_set(smp_processor_id(), nohz_cpu_mask);
+	cpu_set(cpu, nohz_cpu_mask);

 	/*
 	 * Leave the clock comparator set up for the next timer
 	 * tick if either rcu or a softirq is pending.
 	 */
-	if (rcu_pending(smp_processor_id()) || local_softirq_pending()) {
-		cpu_clear(smp_processor_id(), nohz_cpu_mask);
+	if (rcu_needs_cpu(cpu) || local_softirq_pending()) {
+		cpu_clear(cpu, nohz_cpu_mask);
 		return;
 	}

--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@ -12,9 +12,10 @@ static int
 check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
 {
        if (hwdev && bus + size > *hwdev->dma_mask) {
-		printk(KERN_ERR
-		    "nommu_%s: overflow %Lx+%lu of device mask %Lx\n",
-	       name, (long long)bus, size, (long long)*hwdev->dma_mask);
+		if (*hwdev->dma_mask >= 0xffffffffULL)
+			printk(KERN_ERR
+			    "nommu_%s: overflow %Lx+%lu of device mask %Lx\n",
+	       			name, (long long)bus, size, (long long)*hwdev->dma_mask);
 		return 0;
 	}
 	return 1;
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@ -102,6 +102,8 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 {
 	if (regs->eflags & X86_EFLAGS_IF)
 		local_irq_disable();
+	/* Make sure to not schedule here because we could be running
+	   on an exception stack. */
 	preempt_enable_no_resched();
 }

@ -483,8 +485,6 @@ static void __kprobes do_trap(int trapnr, int signr, char *str,
 {
 	struct task_struct *tsk = current;

-	conditional_sti(regs);
-
 	tsk->thread.error_code = error_code;
 	tsk->thread.trap_no = trapnr;

@ -521,6 +521,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
 							== NOTIFY_STOP) \
 		return; \
+	conditional_sti(regs);						\
 	do_trap(trapnr, signr, str, regs, error_code, NULL); \
 }

@ -535,6 +536,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
 							== NOTIFY_STOP) \
 		return; \
+	conditional_sti(regs);						\
 	do_trap(trapnr, signr, str, regs, error_code, &info); \
 }

@ -548,7 +550,17 @@ DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
 DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
 DO_ERROR(18, SIGSEGV, "reserved", reserved)
-DO_ERROR(12, SIGBUS,  "stack segment", stack_segment)
+
+/* Runs on IST stack */
+asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
+{
+	if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
+			12, SIGBUS) == NOTIFY_STOP)
+		return;
+	preempt_conditional_sti(regs);
+	do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
+	preempt_conditional_cli(regs);
+}

 asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
 {
@ -682,8 +694,9 @@ asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
 	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) {
 		return;
 	}
+	preempt_conditional_sti(regs);
 	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
-	return;
+	preempt_conditional_cli(regs);
 }

 /* Help handler running on IST stack to switch back to user stack
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@ -34,7 +34,10 @@ static nodemask_t nodes_found __initdata;
 static struct bootnode nodes[MAX_NUMNODES] __initdata;
 static struct bootnode nodes_add[MAX_NUMNODES] __initdata;
 static int found_add_area __initdata;
-int hotadd_percent __initdata = 10;
+int hotadd_percent __initdata = 0;
+#ifndef RESERVE_HOTADD
+#define hotadd_percent 0	/* Ignore all settings */
+#endif
 static u8 pxm2node[256] = { [0 ... 255] = 0xff };

 /* Too small nodes confuse the VM badly. Usually they result
@ -103,6 +106,7 @@ static __init void bad_srat(void)
 	int i;
 	printk(KERN_ERR "SRAT: SRAT not used.\n");
 	acpi_numa = -1;
+	found_add_area = 0;
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		apicid_to_node[i] = NUMA_NO_NODE;
 	for (i = 0; i < MAX_NUMNODES; i++)
@ -154,7 +158,8 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
 	int pxm, node;
 	if (srat_disabled())
 		return;
-	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {		bad_srat();
+	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {
+		bad_srat();
 		return;
 	}
 	if (pa->flags.enabled == 0)
@ -191,15 +196,17 @@ static int hotadd_enough_memory(struct bootnode *nd)
 	allowed = (end_pfn - e820_hole_size(0, end_pfn)) * PAGE_SIZE;
 	allowed = (allowed / 100) * hotadd_percent;
 	if (allocated + mem > allowed) {
+		unsigned long range;
 		/* Give them at least part of their hotadd memory upto hotadd_percent
 		   It would be better to spread the limit out
 		   over multiple hotplug areas, but that is too complicated
 		   right now */
 		if (allocated >= allowed)
 			return 0;
-		pages = (allowed - allocated + mem) / sizeof(struct page);
+		range = allowed - allocated;
+		pages = (range / PAGE_SIZE);
 		mem = pages * sizeof(struct page);
-		nd->end = nd->start + pages*PAGE_SIZE;
+		nd->end = nd->start + range;
 	}
 	/* Not completely fool proof, but a good sanity check */
 	addr = find_e820_area(last_area_end, end_pfn<<PAGE_SHIFT, mem);
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@ -291,7 +291,7 @@ config SX

 config RIO
 	tristate "Specialix RIO system support"
-	depends on SERIAL_NONSTANDARD && !64BIT
+	depends on SERIAL_NONSTANDARD
 	help
 	  This is a driver for the Specialix RIO, a smart serial card which
 	  drives an outboard box that can support up to 128 ports.  Product
--- a/drivers/char/rio/host.h
+++ b/drivers/char/rio/host.h
@ -33,12 +33,6 @@
 #ifndef __rio_host_h__
 #define __rio_host_h__

-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_host_h_sccs_ = "@(#)host.h	1.2";
-#endif
-#endif
-
 /*
 ** the host structure - one per host card in the system.
 */
@ -77,9 +71,6 @@ struct Host {
 #define RC_STARTUP            1
 #define RC_RUNNING            2
 #define RC_STUFFED            3
-#define RC_SOMETHING          4
-#define RC_SOMETHING_NEW      5
-#define RC_SOMETHING_ELSE     6
 #define RC_READY              7
 #define RUN_STATE             7
 /*
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/char/rio/rioboot.c
@ -34,6 +34,7 @@
 #include <linux/slab.h>
 #include <linux/termios.h>
 #include <linux/serial.h>
+#include <linux/vmalloc.h>
 #include <asm/semaphore.h>
 #include <linux/generic_serial.h>
 #include <linux/errno.h>
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@ -1394,14 +1394,17 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 		return RIO_FAIL;
 	}

-	if (((int) ((char) PortP->InUse) == -1) || !(CmdBlkP = RIOGetCmdBlk())) {
-		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block for command %d on port %d\n", Cmd, PortP->PortNum);
+	if ((PortP->InUse == (typeof(PortP->InUse))-1) ||
+			!(CmdBlkP = RIOGetCmdBlk())) {
+		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block "
+			"for command %d on port %d\n", Cmd, PortP->PortNum);
 		return RIO_FAIL;
 	}

-	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", CmdBlkP, PortP->InUse);
+	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n",
+			CmdBlkP, PortP->InUse);

-	PktCmdP = (struct PktCmd_M *) &CmdBlkP->Packet.data[0];
+	PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0];

 	CmdBlkP->Packet.src_unit = 0;
 	if (PortP->SecondBlock)
@ -1425,38 +1428,46 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)

 	switch (Cmd) {
 	case MEMDUMP:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p (addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p "
+				"(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
 		PktCmdP->SubCommand = MEMDUMP;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case FCLOSE:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n",
+				CmdBlkP);
 		break;
 	case READ_REGISTER:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) "
+				"command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
 		PktCmdP->SubCommand = READ_REGISTER;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case RESUME:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n",
+				CmdBlkP);
 		break;
 	case RFLUSH:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n",
+				CmdBlkP);
 		CmdBlkP->PostFuncP = RIORFlushEnable;
 		break;
 	case SUSPEND:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n",
+				CmdBlkP);
 		break;

 	case MGET:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n",
+				CmdBlkP);
 		break;

 	case MSET:
 	case MBIC:
 	case MBIS:
 		CmdBlkP->Packet.data[4] = (char) PortP->ModemLines;
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command "
+				"blk %p\n", CmdBlkP);
 		break;

 	case WFLUSH:
@ -1465,12 +1476,14 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 		 ** allowed then we should not bother sending any more to the
 		 ** RTA.
 		 */
-		if ((int) ((char) PortP->WflushFlag) == (int) -1) {
-			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, WflushFlag about to wrap!");
+		if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) {
+			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, "
+					"WflushFlag about to wrap!");
 			RIOFreeCmdBlk(CmdBlkP);
 			return (RIO_FAIL);
 		} else {
-			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command blk %p\n", CmdBlkP);
+			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command "
+					"blk %p\n", CmdBlkP);
 			CmdBlkP->PostFuncP = RIOWFlushMark;
 		}
 		break;
--- a/drivers/char/rio/rioioctl.h
+++ b/drivers/char/rio/rioioctl.h
@ -33,10 +33,6 @@
 #ifndef	__rioioctl_h__
 #define	__rioioctl_h__

-#ifdef SCCS_LABELS
-static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
-#endif
-
 /*
 ** RIO device driver - user ioctls and associated structures.
 */
@ -44,55 +40,13 @@ static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
 struct portStats {
 	int port;
 	int gather;
-	ulong txchars;
-	ulong rxchars;
-	ulong opens;
-	ulong closes;
-	ulong ioctls;
+	unsigned long txchars;
+	unsigned long rxchars;
+	unsigned long opens;
+	unsigned long closes;
+	unsigned long ioctls;
 };

-
-#define rIOC	('r'<<8)
-#define	TCRIOSTATE	(rIOC | 1)
-#define	TCRIOXPON	(rIOC | 2)
-#define	TCRIOXPOFF	(rIOC | 3)
-#define	TCRIOXPCPS	(rIOC | 4)
-#define	TCRIOXPRINT	(rIOC | 5)
-#define TCRIOIXANYON	(rIOC | 6)
-#define	TCRIOIXANYOFF	(rIOC | 7)
-#define TCRIOIXONON	(rIOC | 8)
-#define	TCRIOIXONOFF	(rIOC | 9)
-#define	TCRIOMBIS	(rIOC | 10)
-#define	TCRIOMBIC	(rIOC | 11)
-#define	TCRIOTRIAD	(rIOC | 12)
-#define TCRIOTSTATE	(rIOC | 13)
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** Add RIO ioctls for manipulating RTS and CTS flow control, (as LynxOS
-** appears to not support hardware flow control).
-*/
-#define TCRIOCTSFLOWEN	(rIOC | 14)	/* enable CTS flow control */
-#define TCRIOCTSFLOWDIS	(rIOC | 15)	/* disable CTS flow control */
-#define TCRIORTSFLOWEN	(rIOC | 16)	/* enable RTS flow control */
-#define TCRIORTSFLOWDIS	(rIOC | 17)	/* disable RTS flow control */
-
-/*
-** 09.12.1998 ARG - ESIL 0776 part fix
-** Definition for 'RIOC' also appears in daemon.h, so we'd better do a
-** #ifndef here first.
-** 'RIO_QUICK_CHECK' also #define'd here as this ioctl is now
-** allowed to be used by customers.
-**
-** 05.02.1999 ARG -
-** This is what I've decied to do with ioctls etc., which are intended to be
-** invoked from users applications :
-** Anything that needs to be defined here will be removed from daemon.h, that
-** way it won't end up having to be defined/maintained in two places. The only
-** consequence of this is that this file should now be #include'd by daemon.h
-**
-** 'stats' ioctls now #define'd here as they are to be used by customers.
-*/
 #define	RIOC	('R'<<8)|('i'<<16)|('o'<<24)

 #define	RIO_QUICK_CHECK	  	(RIOC | 105)
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@ -22,7 +22,7 @@ config TCG_TPM

 config TCG_TIS
 	tristate "TPM Interface Specification 1.2 Interface"
-	depends on TCG_TPM
+	depends on TCG_TPM && PNPACPI
 	---help---
 	  If you have a TPM security chip that is compliant with the
 	  TCG TIS 1.2 TPM specification say Yes and it will be accessible
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@ -140,7 +140,7 @@ extern int tpm_pm_resume(struct device *);
 extern struct dentry ** tpm_bios_log_setup(char *);
 extern void tpm_bios_log_teardown(struct dentry **);
 #else
-static inline struct dentry* tpm_bios_log_setup(char *name)
+static inline struct dentry ** tpm_bios_log_setup(char *name)
 {
 	return NULL;
 }
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@ -55,7 +55,7 @@ enum tis_int_flags {
 };

 enum tis_defaults {
-	TIS_MEM_BASE = 0xFED4000,
+	TIS_MEM_BASE = 0xFED40000,
 	TIS_MEM_LEN = 0x5000,
 	TIS_SHORT_TIMEOUT = 750,	/* ms */
 	TIS_LONG_TIMEOUT = 2000,	/* 2 sec */
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@ -33,11 +33,6 @@
 *	82801E   (C-ICH)  : document number 273599-001, 273645-002,
 *	82801EB  (ICH5)   : document number 252516-001, 252517-003,
 *	82801ER  (ICH5R)  : document number 252516-001, 252517-003,
- *	82801FB  (ICH6)   : document number 301473-002, 301474-007,
- *	82801FR  (ICH6R)  : document number 301473-002, 301474-007,
- *	82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- *	82801FW  (ICH6W)  : document number 301473-001, 301474-007,
- *	82801FRW (ICH6RW) : document number 301473-001, 301474-007
 *
 *  20000710 Nils Faerber
 *	Initial Version 0.01
@ -66,6 +61,10 @@
 *  20050807 Wim Van Sebroeck <wim@iguana.be>
 *	0.08 Make sure that the watchdog is only "armed" when started.
 *	     (Kernel Bug 4251)
+ *  20060416 Wim Van Sebroeck <wim@iguana.be>
+ *	0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
+ *	     ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
+ *	     chipsets)
 */

 /*
@ -90,7 +89,7 @@
 #include "i8xx_tco.h"

 /* Module and version information */
-#define TCO_VERSION "0.08"
+#define TCO_VERSION "0.09"
 #define TCO_MODULE_NAME "i8xx TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 #define PFX TCO_MODULE_NAME ": "
@ -391,11 +390,6 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@ -423,6 +423,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (tmr_atboot && started == 0) {
 		printk(KERN_INFO PFX "Starting Watchdog Timer\n");
 		s3c2410wdt_start();
+	} else if (!tmr_atboot) {
+		/* if we're not enabling the watchdog, then ensure it is
+		 * disabled if it has been left running from the bootloader
+		 * or other source */
+
+		s3c2410wdt_stop();
 	}

 	return 0;
--- a/drivers/char/watchdog/sc1200wdt.c
+++ b/drivers/char/watchdog/sc1200wdt.c
@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void)
 {
 	int ret;

-	printk(banner);
+	printk("%s\n", banner);

 	spin_lock_init(&sc1200wdt_lock);
 	sema_init(&open_sem, 1);
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@ -392,6 +392,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
 	 * register content.
 	 * To actually enable physical responses is the job of our interrupt
 	 * handler which programs the physical request filter. */
-	reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
+	reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);

 	DBGMSG("physUpperBoundOffset=%08x",
 	       reg_read(ohci, OHCI1394_PhyUpperBound));
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@ -42,6 +42,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/string.h>
+#include <linux/stringify.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/fs.h>
@ -117,7 +118,8 @@ MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default
 */
 static int max_sectors = SBP2_MAX_SECTORS;
 module_param(max_sectors, int, 0444);
-MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)");
+MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
+		 __stringify(SBP2_MAX_SECTORS) ")");

 /*
 * Exclusive login to sbp2 device? In most cases, the sbp2 driver should
@ -135,18 +137,45 @@ module_param(exclusive_login, int, 0644);
 MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)");

 /*
- * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
- * if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows inquiry
- * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
+ * If any of the following workarounds is required for your device to work,
+ * please submit the kernel messages logged by sbp2 to the linux1394-devel
+ * mailing list.
 *
- * If force_inquiry_hack=1 is required for your device to work,
- * please submit the logged sbp2_firmware_revision value of this device to
- * the linux1394-devel mailing list.
+ * - 128kB max transfer
+ *   Limit transfer size. Necessary for some old bridges.
+ *
+ * - 36 byte inquiry
+ *   When scsi_mod probes the device, let the inquiry command look like that
+ *   from MS Windows.
+ *
+ * - skip mode page 8
+ *   Suppress sending of mode_sense for mode page 8 if the device pretends to
+ *   support the SCSI Primary Block commands instead of Reduced Block Commands.
+ *
+ * - fix capacity
+ *   Tell sd_mod to correct the last sector number reported by read_capacity.
+ *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
+ *   Don't use this with devices which don't have this bug.
+ *
+ * - override internal blacklist
+ *   Instead of adding to the built-in blacklist, use only the workarounds
+ *   specified in the module load parameter.
+ *   Useful if a blacklist entry interfered with a non-broken device.
 */
+static int sbp2_default_workarounds;
+module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
+MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
+	", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
+	", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
+	", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
+	", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+	", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
+	", or a combination)");
+
+/* legacy parameter */
 static int force_inquiry_hack;
 module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
+MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");

 /*
 * Export information about protocols/devices supported by this driver.
@ -266,14 +295,55 @@ static struct hpsb_protocol_driver sbp2_driver = {
 };

 /*
- * List of device firmwares that require the inquiry hack.
- * Yields a few false positives but did not break other devices so far.
+ * List of devices with known bugs.
+ *
+ * The firmware_revision field, masked with 0xffff00, is the best indicator
+ * for the type of bridge chip of a device.  It yields a few false positives
+ * but this did not break correctly behaving devices so far.
 */
-static u32 sbp2_broken_inquiry_list[] = {
-	0x00002800,	/* Stefan Richter <stefanr@s5r6.in-berlin.de> */
-			/* DViCO Momobay CX-1 */
-	0x00000200	/* Andreas Plesch <plesch@fas.harvard.edu> */
-			/* QPS Fire DVDBurner */
+static const struct {
+	u32 firmware_revision;
+	u32 model_id;
+	unsigned workarounds;
+} sbp2_workarounds_table[] = {
+	/* TSB42AA9 */ {
+		.firmware_revision	= 0x002800,
+		.workarounds		= SBP2_WORKAROUND_INQUIRY_36 |
+					  SBP2_WORKAROUND_MODE_SENSE_8,
+	},
+	/* Initio bridges, actually only needed for some older ones */ {
+		.firmware_revision	= 0x000200,
+		.workarounds		= SBP2_WORKAROUND_INQUIRY_36,
+	},
+	/* Symbios bridge */ {
+		.firmware_revision	= 0xa0b800,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
+	},
+	/*
+	 * Note about the following Apple iPod blacklist entries:
+	 *
+	 * There are iPods (2nd gen, 3rd gen) with model_id==0.  Since our
+	 * matching logic treats 0 as a wildcard, we cannot match this ID
+	 * without rewriting the matching routine.  Fortunately these iPods
+	 * do not feature the read_capacity bug according to one report.
+	 * Read_capacity behaviour as well as model_id could change due to
+	 * Apple-supplied firmware updates though.
+	 */
+	/* iPod 4th generation */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000021,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod mini */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000023,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod Photo */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x00007e,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	}
 };

 /**************************************
@ -765,11 +835,16 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud

 	/* Register the status FIFO address range. We could use the same FIFO
 	 * for targets at different nodes. However we need different FIFOs per
-	 * target in order to support multi-unit devices. */
+	 * target in order to support multi-unit devices.
+	 * The FIFO is located out of the local host controller's physical range
+	 * but, if possible, within the posted write area. Status writes will
+	 * then be performed as unified transactions. This slightly reduces
+	 * bandwidth usage, and some Prolific based devices seem to require it.
+	 */
 	scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
 			&sbp2_highlevel, ud->ne->host, &sbp2_ops,
 			sizeof(struct sbp2_status_block), sizeof(quadlet_t),
-			~0ULL, ~0ULL);
+			0x010000000000ULL, CSR1212_ALL_SPACE_END);
 	if (!scsi_id->status_fifo_addr) {
 		SBP2_ERR("failed to allocate status FIFO address range");
 		goto failed_alloc;
@ -1450,7 +1525,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 	struct csr1212_dentry *dentry;
 	u64 management_agent_addr;
 	u32 command_set_spec_id, command_set, unit_characteristics,
-	    firmware_revision, workarounds;
+	    firmware_revision;
+	unsigned workarounds;
 	int i;

 	SBP2_DEBUG_ENTER();
@ -1506,12 +1582,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 		case SBP2_FIRMWARE_REVISION_KEY:
 			/* Firmware revision */
 			firmware_revision = kv->value.immediate;
-			if (force_inquiry_hack)
-				SBP2_INFO("sbp2_firmware_revision = %x",
-					  (unsigned int)firmware_revision);
-			else
-				SBP2_DEBUG("sbp2_firmware_revision = %x",
-					   (unsigned int)firmware_revision);
+			SBP2_DEBUG("sbp2_firmware_revision = %x",
+				   (unsigned int)firmware_revision);
 			break;

 		default:
@ -1519,41 +1591,44 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 		}
 	}

-	/* This is the start of our broken device checking. We try to hack
-	 * around oddities and known defects.  */
-	workarounds = 0x0;
-
-	/* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a
-	 * bridge with 128KB max transfer size limitation. For sanity, we
-	 * only voice this when the current max_sectors setting
-	 * exceeds the 128k limit. By default, that is not the case.
-	 *
-	 * It would be really nice if we could detect this before the scsi
-	 * host gets initialized. That way we can down-force the
-	 * max_sectors to account for it. That is not currently
-	 * possible.  */
-	if ((firmware_revision & 0xffff00) ==
-			SBP2_128KB_BROKEN_FIRMWARE &&
-			(max_sectors * 512) > (128*1024)) {
-		SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.",
-				NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
-		SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!",
-				max_sectors);
-		workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER;
+	workarounds = sbp2_default_workarounds;
+	if (force_inquiry_hack) {
+		SBP2_WARN("force_inquiry_hack is deprecated. "
+			  "Use parameter 'workarounds' instead.");
+		workarounds |= SBP2_WORKAROUND_INQUIRY_36;
 	}

-	/* Check for a blacklisted set of devices that require us to force
-	 * a 36 byte host inquiry. This can be overriden as a module param
-	 * (to force all hosts).  */
-	for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
-		if ((firmware_revision & 0xffff00) ==
-				sbp2_broken_inquiry_list[i]) {
-			SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
-					NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
-			workarounds |= SBP2_BREAKAGE_INQUIRY_HACK;
-			break; /* No need to continue. */
+	if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
+		for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
+			if (sbp2_workarounds_table[i].firmware_revision &&
+			    sbp2_workarounds_table[i].firmware_revision !=
+			    (firmware_revision & 0xffff00))
+				continue;
+			if (sbp2_workarounds_table[i].model_id &&
+			    sbp2_workarounds_table[i].model_id != ud->model_id)
+				continue;
+			workarounds |= sbp2_workarounds_table[i].workarounds;
+			break;
 		}
-	}
+
+	if (workarounds)
+		SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "
+			  "(firmware_revision 0x%06x, vendor_id 0x%06x,"
+			  " model_id 0x%06x)",
+			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+			  workarounds, firmware_revision,
+			  ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
+			  ud->model_id);
+
+	/* We would need one SCSI host template for each target to adjust
+	 * max_sectors on the fly, therefore warn only. */
+	if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+	    (max_sectors * 512) > (128 * 1024))
+		SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
+			  "max transfer size. WARNING: Current max_sectors "
+			  "setting is larger than 128KB (%d sectors)",
+			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+			  max_sectors);

 	/* If this is a logical unit directory entry, process the parent
 	 * to get the values. */
@ -2447,19 +2522,25 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev)

 	scsi_id->sdev = sdev;

-	if (force_inquiry_hack ||
-	    scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+	if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
 		sdev->inquiry_len = 36;
-		sdev->skip_ms_page_8 = 1;
-	}
 	return 0;
 }

 static int sbp2scsi_slave_configure(struct scsi_device *sdev)
 {
+	struct scsi_id_instance_data *scsi_id =
+		(struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
 	blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
+
+	if (sdev->type == TYPE_DISK &&
+	    scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+		sdev->skip_ms_page_8 = 1;
+	if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
+		sdev->fix_capacity = 1;
 	return 0;
 }

@ -2603,7 +2684,9 @@ static int sbp2_module_init(void)
 		scsi_driver_template.cmd_per_lun = 1;
 	}

-	/* Set max sectors (module load option). Default is 255 sectors. */
+	if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+	    (max_sectors * 512) > (128 * 1024))
+		max_sectors = 128 * 1024 / 512;
 	scsi_driver_template.max_sectors = max_sectors;

 	/* Register our high level driver with 1394 stack */
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@ -226,11 +226,6 @@ struct sbp2_status_block {
 #define SBP2_UNIT_SPEC_ID_ENTRY					0x0000609e
 #define SBP2_SW_VERSION_ENTRY					0x00010483

-/*
- * Other misc defines
- */
-#define SBP2_128KB_BROKEN_FIRMWARE				0xa0b800
-
 /*
 * SCSI specific stuff
 */
@ -239,6 +234,13 @@ struct sbp2_status_block {
 #define SBP2_MAX_SECTORS		255	/* Max sectors supported */
 #define SBP2_MAX_CMDS			8	/* This should be safe */

+/* Flags for detected oddities and brokeness */
+#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1
+#define SBP2_WORKAROUND_INQUIRY_36	0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8	0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY	0x8
+#define SBP2_WORKAROUND_OVERRIDE	0x100
+
 /* This is the two dma types we use for cmd_dma below */
 enum cmd_dma_types {
 	CMD_DMA_NONE,
@ -268,10 +270,6 @@ struct sbp2_command_info {

 };

-/* A list of flags for detected oddities and brokeness. */
-#define SBP2_BREAKAGE_128K_MAX_TRANSFER		0x1
-#define SBP2_BREAKAGE_INQUIRY_HACK		0x2
-
 struct sbp2scsi_host_info;

 /*
@ -345,7 +343,7 @@ struct scsi_id_instance_data {
 	struct Scsi_Host *scsi_host;

 	/* Device specific workarounds/brokeness */
-	u32 workarounds;
+	unsigned workarounds;
 };

 /* Sbp2 host data structure (one per IEEE1394 host) */
--- a/drivers/infiniband/core/uverbs_mem.c
+++ b/drivers/infiniband/core/uverbs_mem.c
@ -211,8 +211,10 @@ void ib_umem_release_on_close(struct ib_device *dev, struct ib_umem *umem)
 	 */

 	work = kmalloc(sizeof *work, GFP_KERNEL);
-	if (!work)
+	if (!work) {
+		mmput(mm);
 		return;
+	}

 	INIT_WORK(&work->work, ib_umem_account, work);
 	work->mm   = mm;
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@ -182,7 +182,7 @@ struct mthca_cmd_context {
 	u8                status;
 };

-static int fw_cmd_doorbell = 1;
+static int fw_cmd_doorbell = 0;
 module_param(fw_cmd_doorbell, int, 0644);
 MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero "
 		 "(and supported by FW)");
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@ -1727,23 +1727,7 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,

 	ind = qp->rq.next_ind;

-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
-			doorbell[1] = cpu_to_be32(qp->qpn << 8);
-
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
-			size0 = 0;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		if (mthca_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
 			mthca_err(dev, "RQ %06x full (%u head, %u tail,"
 					" %d max, %d nreq)\n", qp->qpn,
@ -1797,6 +1781,23 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 		++ind;
 		if (unlikely(ind >= qp->rq.max))
 			ind -= qp->rq.max;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
+			doorbell[1] = cpu_to_be32(qp->qpn << 8);
+
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
+			size0 = 0;
+		}
 	}

 out:
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@ -340,7 +340,10 @@ static void srp_disconnect_target(struct srp_target_port *target)
 	/* XXX should send SRP_I_LOGOUT request */

 	init_completion(&target->done);
-	ib_send_cm_dreq(target->cm_id, NULL, 0);
+	if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
+		printk(KERN_DEBUG PFX "Sending CM DREQ failed\n");
+		return;
+	}
 	wait_for_completion(&target->done);
 }

@ -351,7 +354,6 @@ static void srp_remove_work(void *target_ptr)
 	spin_lock_irq(target->scsi_host->host_lock);
 	if (target->state != SRP_TARGET_DEAD) {
 		spin_unlock_irq(target->scsi_host->host_lock);
-		scsi_host_put(target->scsi_host);
 		return;
 	}
 	target->state = SRP_TARGET_REMOVED;
@ -365,8 +367,6 @@ static void srp_remove_work(void *target_ptr)
 	ib_destroy_cm_id(target->cm_id);
 	srp_free_target_ib(target);
 	scsi_host_put(target->scsi_host);
-	/* And another put to really free the target port... */
-	scsi_host_put(target->scsi_host);
 }

 static int srp_connect_target(struct srp_target_port *target)
@ -1241,7 +1241,7 @@ static int srp_reset_device(struct scsi_cmnd *scmnd)
 	list_for_each_entry_safe(req, tmp, &target->req_queue, list)
 		if (req->scmnd->device == scmnd->device) {
 			req->scmnd->result = DID_RESET << 16;
-			scmnd->scsi_done(scmnd);
+			req->scmnd->scsi_done(req->scmnd);
 			srp_remove_req(target, req);
 		}

--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@ -1499,7 +1499,6 @@ static int __init capi_init(void)
 		printk(KERN_ERR "capi20: unable to get major %d\n", capi_major);
 		return major_ret;
 	}
-	capi_major = major_ret;
 	capi_class = class_create(THIS_MODULE, "capi");
 	if (IS_ERR(capi_class)) {
 		unregister_chrdev(capi_major, "capi20");
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@ -710,8 +710,8 @@ static int gigaset_probe(struct usb_interface *interface,
 	retval = -ENODEV; //FIXME

 	/* See if the device offered us matches what we can accept */
-	if ((le16_to_cpu(udev->descriptor.idVendor  != USB_M105_VENDOR_ID)) ||
-	    (le16_to_cpu(udev->descriptor.idProduct != USB_M105_PRODUCT_ID)))
+	if ((le16_to_cpu(udev->descriptor.idVendor)  != USB_M105_VENDOR_ID) ||
+	    (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID))
 		return -ENODEV;

 	/* this starts to become ascii art... */
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@ -4,8 +4,11 @@ menu "LED devices"
 config NEW_LEDS
 	bool "LED Support"
 	help
-	  Say Y to enable Linux LED support.  This is not related to standard
-	  keyboard LEDs which are controlled via the input system.
+	  Say Y to enable Linux LED support.  This allows control of supported
+	  LEDs from both userspace and optionally, by kernel events (triggers).
+
+	  This is not related to standard keyboard LEDs which are controlled
+	  via the input system.

 config LEDS_CLASS
 	tristate "LED Class Support"
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/timer.h>
 #include <linux/err.h>
+#include <linux/ctype.h>
 #include <linux/leds.h>
 #include "leds.h"

@ -43,9 +44,13 @@ static ssize_t led_brightness_store(struct class_device *dev,
 	ssize_t ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;

-	if (after - buf > 0) {
-		ret = after - buf;
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
+		ret = count;
 		led_set_brightness(led_cdev, state);
 	}

--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/timer.h>
+#include <linux/ctype.h>
 #include <linux/leds.h>
 #include "leds.h"

@ -69,11 +70,15 @@ static ssize_t led_delay_on_store(struct class_device *dev, const char *buf,
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;

-	if (after - buf > 0) {
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
 		timer_data->delay_on = state;
 		mod_timer(&timer_data->timer, jiffies + 1);
-		ret = after - buf;
+		ret = count;
 	}

 	return ret;
@ -97,11 +102,15 @@ static ssize_t led_delay_off_store(struct class_device *dev, const char *buf,
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;

-	if (after - buf > 0) {
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
 		timer_data->delay_off = state;
 		mod_timer(&timer_data->timer, jiffies + 1);
-		ret = after - buf;
+		ret = count;
 	}

 	return ret;
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
 		}
 		else
 			data->bytes_xfered =
-				(data->blocks * (1 << data->blksz_bits)) -
+				(data->blocks * data->blksz) -
 				host->pio.len;
 	}

@ -575,7 +575,7 @@ static int
 au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 {

-	int datalen = data->blocks * (1 << data->blksz_bits);
+	int datalen = data->blocks * data->blksz;

 	if (dma != 0)
 		host->flags |= HOST_F_DMA;
@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 	if (host->dma.len == 0)
 		return MMC_ERR_TIMEOUT;

-	au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+	au_writel(data->blksz - 1, HOST_BLKSIZE(host));

 	if (host->flags & HOST_F_DMA) {
 		int i;
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@ -218,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host,
 	if(!loops)
 		return 0;

-	dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
-		loops, where, *pstat, stat_mask);
+	/* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+	if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+		dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+			loops, where, *pstat, stat_mask);
 	return loops;
 }

@ -333,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd,
 	WARN_ON(host->cmd != NULL);
 	host->cmd = cmd;

+	/* Ensure, that clock are stopped else command programming and start fails */
+	imxmci_stop_clock(host);
+
 	if (cmd->flags & MMC_RSP_BUSY)
 		cmdat |= CMD_DAT_CONT_BUSY;

@ -553,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 	int trans_done = 0;
 	unsigned int stat = *pstat;

-	if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+	if(host->actual_bus_width != MMC_BUS_WIDTH_4)
 		burst_len = 16;
 	else
 		burst_len = 64;
@ -591,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 			stat = MMC_STATUS;

 			/* Flush extra bytes from FIFO */
-			while(flush_len >= 2){
-				flush_len -= 2;
+			while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
 				i = MMC_BUFFER_ACCESS;
 				stat = MMC_STATUS;
 				stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@ -746,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data)
 			data_dir_mask = STATUS_DATA_TRANS_DONE;
 		}

-		imxmci_busy_wait_for_status(host, &stat,
-				data_dir_mask,
-				50, "imxmci_tasklet_fnc data");
-
 		if(stat & data_dir_mask) {
 			clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
 			imxmci_data_done(host, stat);
@ -865,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)

 		imxmci_stop_clock(host);
 		MMC_CLK_RATE = (prescaler<<3) | clk;
-		imxmci_start_clock(host);
+		/*
+		 * Under my understanding, clock should not be started there, because it would
+		 * initiate SDHC sequencer and send last or random command into card
+		 */
+		/*imxmci_start_clock(host);*/

 		dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
 	} else {
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@ -951,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host)
 		data.timeout_ns = card->csd.tacc_ns * 10;
 		data.timeout_clks = card->csd.tacc_clks * 10;
 		data.blksz_bits = 3;
+		data.blksz = 1 << 3;
 		data.blocks = 1;
 		data.flags = MMC_DATA_READ;
 		data.sg = &sg;
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.data.timeout_ns = card->csd.tacc_ns * 10;
 		brq.data.timeout_clks = card->csd.tacc_clks * 10;
 		brq.data.blksz_bits = md->block_bits;
+		brq.data.blksz = 1 << md->block_bits;
 		brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
 		brq.stop.opcode = MMC_STOP_TRANSMISSION;
 		brq.stop.arg = 0;
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@ -119,7 +119,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 		nob = 0xffff;

 	writel(nob, host->base + MMC_NOB);
-	writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
+	writel(data->blksz, host->base + MMC_BLKLEN);

 	clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
 	do_div(clks, 1000000000UL);
@ -283,7 +283,7 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
 	 * data blocks as being in error.
 	 */
 	if (data->error == MMC_ERR_NONE)
-		data->bytes_xfered = data->blocks << data->blksz_bits;
+		data->bytes_xfered = data->blocks * data->blksz;
 	else
 		data->bytes_xfered = 0;

--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
 	unsigned long dmaflags;

 	DBGF("blksz %04x blks %04x flags %08x\n",
-		1 << data->blksz_bits, data->blocks, data->flags);
+		data->blksz, data->blocks, data->flags);
 	DBGF("tsac %d ms nsac %d clk\n",
 		data->timeout_ns / 1000000, data->timeout_clks);

 	/*
 	 * Calculate size.
 	 */
-	host->size = data->blocks << data->blksz_bits;
+	host->size = data->blocks * data->blksz;

 	/*
 	 * Check timeout values for overflow.
@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
 	 * Two bytes are needed for each data line.
 	 */
 	if (host->bus_width == MMC_BUS_WIDTH_1) {
-		blksize = (1 << data->blksz_bits) + 2;
+		blksize = data->blksz + 2;

 		wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0);
 		wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
 	} else if (host->bus_width == MMC_BUS_WIDTH_4) {
-		blksize = (1 << data->blksz_bits) + 2 * 4;
+		blksize = data->blksz + 2 * 4;

 		wbsd_write_index(host, WBSD_IDX_PBSMSB,
 			((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@ -650,9 +650,11 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)

 	/* Hardware bug work-around, the chip is unable to do PCI DMA
 	   to/from anything above 1GB :-( */
-	if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) ||
+		mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
 		/* Sigh... */
-		pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+		if (!dma_mapping_error(mapping))
+			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 		dev_kfree_skb_any(skb);
 		skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
 		if (skb == NULL)
@ -660,8 +662,10 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 		mapping = pci_map_single(bp->pdev, skb->data,
 					 RX_PKT_BUF_SZ,
 					 PCI_DMA_FROMDEVICE);
-		if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
-			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+		if (dma_mapping_error(mapping) ||
+			mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+			if (!dma_mapping_error(mapping))
+				pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 			dev_kfree_skb_any(skb);
 			return -ENOMEM;
 		}
@ -967,9 +971,10 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}

 	mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-	if (mapping + len > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
-		pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
+		if (!dma_mapping_error(mapping))
+			pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);

 		bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
 					     GFP_ATOMIC|GFP_DMA);
@ -978,8 +983,9 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)

 		mapping = pci_map_single(bp->pdev, bounce_skb->data,
 					 len, PCI_DMA_TODEVICE);
-		if (mapping + len > B44_DMA_MASK) {
-			pci_unmap_single(bp->pdev, mapping,
+		if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
+			if (!dma_mapping_error(mapping))
+				pci_unmap_single(bp->pdev, mapping,
 					 len, PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(bounce_skb);
 			goto err_out;
@ -1203,7 +1209,8 @@ static int b44_alloc_consistent(struct b44 *bp)
 		                             DMA_TABLE_BYTES,
 		                             DMA_BIDIRECTIONAL);

-		if (rx_ring_dma + size > B44_DMA_MASK) {
+		if (dma_mapping_error(rx_ring_dma) ||
+			rx_ring_dma + size > B44_DMA_MASK) {
 			kfree(rx_ring);
 			goto out_err;
 		}
@ -1229,7 +1236,8 @@ static int b44_alloc_consistent(struct b44 *bp)
 		                             DMA_TABLE_BYTES,
 		                             DMA_TO_DEVICE);

-		if (tx_ring_dma + size > B44_DMA_MASK) {
+		if (dma_mapping_error(tx_ring_dma) ||
+			tx_ring_dma + size > B44_DMA_MASK) {
 			kfree(tx_ring);
 			goto out_err;
 		}
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@ -53,6 +53,7 @@
 #define DRV_VERSION	"v1.17b"
 #define DRV_RELDATE	"2006/03/10"
 #include "dl2k.h"
+#include <linux/dma-mapping.h>

 static char version[] __devinitdata =
      KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";	
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@ -149,6 +149,8 @@ static void enp2611_check_link_status(unsigned long __dummy)
 		int status;

 		dev = nds[i];
+		if (dev == NULL)
+			continue;

 		status = pm3386_is_link_up(i);
 		if (status && !netif_carrier_ok(dev)) {
@ -191,6 +193,7 @@ static void enp2611_set_port_admin_status(int port, int up)

 static int __init enp2611_init_module(void)
 { 
+	int ports;
 	int i;

 	if (!machine_is_enp2611())
@ -199,7 +202,8 @@ static int __init enp2611_init_module(void)
 	caleb_reset();
 	pm3386_reset();

-	for (i = 0; i < 3; i++) {
+	ports = pm3386_port_count();
+	for (i = 0; i < ports; i++) {
 		nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
 		if (nds[i] == NULL) {
 			while (--i >= 0)
@ -215,9 +219,10 @@ static int __init enp2611_init_module(void)

 	ixp2400_msf_init(&enp2611_msf_parameters);

-	if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
-		for (i = 0; i < 3; i++)
-			free_netdev(nds[i]);
+	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
+		for (i = 0; i < ports; i++)
+			if (nds[i])
+				free_netdev(nds[i]);
 		return -EINVAL;
 	}

--- a/drivers/net/ixp2000/pm3386.c
+++ b/drivers/net/ixp2000/pm3386.c
@ -86,40 +86,53 @@ static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
 	pm3386_reg_write(port >> 1, reg, value);
 }

+int pm3386_secondary_present(void)
+{
+	return pm3386_reg_read(1, 0) == 0x3386;
+}

 void pm3386_reset(void)
 {
 	u8 mac[3][6];
+	int secondary;
+
+	secondary = pm3386_secondary_present();

 	/* Save programmed MAC addresses.  */
 	pm3386_get_mac(0, mac[0]);
 	pm3386_get_mac(1, mac[1]);
-	pm3386_get_mac(2, mac[2]);
+	if (secondary)
+		pm3386_get_mac(2, mac[2]);

 	/* Assert analog and digital reset.  */
 	pm3386_reg_write(0, 0x002, 0x0060);
-	pm3386_reg_write(1, 0x002, 0x0060);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0060);
 	mdelay(1);

 	/* Deassert analog reset.  */
 	pm3386_reg_write(0, 0x002, 0x0062);
-	pm3386_reg_write(1, 0x002, 0x0062);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0062);
 	mdelay(10);

 	/* Deassert digital reset.  */
 	pm3386_reg_write(0, 0x002, 0x0063);
-	pm3386_reg_write(1, 0x002, 0x0063);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0063);
 	mdelay(10);

 	/* Restore programmed MAC addresses.  */
 	pm3386_set_mac(0, mac[0]);
 	pm3386_set_mac(1, mac[1]);
-	pm3386_set_mac(2, mac[2]);
+	if (secondary)
+		pm3386_set_mac(2, mac[2]);

 	/* Disable carrier on all ports.  */
 	pm3386_set_carrier(0, 0);
 	pm3386_set_carrier(1, 0);
-	pm3386_set_carrier(2, 0);
+	if (secondary)
+		pm3386_set_carrier(2, 0);
 }

 static u16 swaph(u16 x)
@ -127,6 +140,11 @@ static u16 swaph(u16 x)
 	return ((x << 8) | (x >> 8)) & 0xffff;
 }

+int pm3386_port_count(void)
+{
+	return 2 + pm3386_secondary_present();
+}
+
 void pm3386_init_port(int port)
 {
 	int pm = port >> 1;
--- a/drivers/net/ixp2000/pm3386.h
+++ b/drivers/net/ixp2000/pm3386.h
@ -13,6 +13,7 @@
 #define __PM3386_H

 void pm3386_reset(void);
+int pm3386_port_count(void);
 void pm3386_init_port(int port);
 void pm3386_get_mac(int port, u8 *mac);
 void pm3386_set_mac(int port, u8 *mac);
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@ -1020,8 +1020,19 @@ static int sky2_up(struct net_device *dev)
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
 	u32 ramsize, rxspace, imask;
-	int err = -ENOMEM;
+	int err;
+	struct net_device *otherdev = hw->dev[sky2->port^1];

+	/* Block bringing up both ports at the same time on a dual port card.
+	 * There is an unfixed bug where receiver gets confused and picks up
+	 * packets out of order. Until this is fixed, prevent data corruption.
+	 */
+	if (otherdev && netif_running(otherdev)) {
+		printk(KERN_INFO PFX "dual port support is disabled.\n");
+		return -EBUSY;
+	}
+
+	err = -ENOMEM;
 	if (netif_msg_ifup(sky2))
 		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@ -634,6 +634,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_vi
 * non-x86 architectures (yes Via exists on PPC among other places),
 * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
 * interrupts delivered properly.
+ *
+ * Some of the on-chip devices are actually '586 devices' so they are
+ * listed here.
 */
 static void quirk_via_irq(struct pci_dev *dev)
 {
@ -648,6 +651,10 @@ static void quirk_via_irq(struct pci_dev *dev)
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
@ -895,6 +902,7 @@ static void __init k8t_sound_hostbridge(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);

+#ifndef CONFIG_ACPI_SLEEP
 /*
 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
 * is not activated. The myth is that Asus said that they do not want the
@ -906,8 +914,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho
 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 
 * becomes necessary to do this tweak in two steps -- I've chosen the Host
 * bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
 */
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;

 static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 {
@ -1050,6 +1062,8 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6 );

+#endif
+
 /*
 * SiS 96x south bridge: BIOS typically hides SMBus device...
 */
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@ -426,7 +426,7 @@ static int ds_open(struct inode *inode, struct file *file)

    if (!warning_printed) {
 	    printk(KERN_INFO "pcmcia: Detected deprecated PCMCIA ioctl "
-			"usage.\n");
+			"usage from process: %s.\n", current->comm);
 	    printk(KERN_INFO "pcmcia: This interface will soon be removed from "
 			"the kernel; please expect breakage unless you upgrade "
 			"to new tools.\n");
@ -601,8 +601,12 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	    ret = CS_BAD_ARGS;
 	else {
 	    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function);
-	    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
-	    pcmcia_put_dev(p_dev);
+	    if (p_dev == NULL)
+		    ret = CS_BAD_ARGS;
+	    else {
+		    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
+		    pcmcia_put_dev(p_dev);
+	    }
 	}
 	break;
    case DS_GET_FIRST_TUPLE:
@ -632,8 +636,12 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 		    ret = CS_BAD_ARGS;
 	    else {
 		    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function);
-		    ret = pccard_get_status(s, p_dev, &buf->status);
-		    pcmcia_put_dev(p_dev);
+		    if (p_dev == NULL)
+			    ret = CS_BAD_ARGS;
+		    else {
+			    ret = pccard_get_status(s, p_dev, &buf->status);
+			    pcmcia_put_dev(p_dev);
+		    }
 	    }
 	    break;
    case DS_VALIDATE_CIS:
@ -665,9 +673,10 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	if (!(buf->conf_reg.Function &&
 	     (buf->conf_reg.Function >= s->functions))) {
 		struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->conf_reg.Function);
-		if (p_dev)
+		if (p_dev) {
 			ret = pcmcia_access_configuration_register(p_dev, &buf->conf_reg);
-		pcmcia_put_dev(p_dev);
+			pcmcia_put_dev(p_dev);
+		}
 	}
 	break;
    case DS_GET_FIRST_REGION:
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@ -1348,7 +1348,7 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 		index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa) 
 			- channel->ccws;
 		if ((irb->scsw.actl & SCSW_ACTL_SUSPENDED) ||
-		    (irb->scsw.cstat | SCHN_STAT_PCI))
+		    (irb->scsw.cstat & SCHN_STAT_PCI))
 			/* Bloody io subsystem tells us lies about cpa... */
 			index = (index - 1) & (LCS_NUM_BUFFS - 1);
 		while (channel->io_idx != index) {
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@ -875,6 +875,9 @@ static unsigned int ata_id_xfermask(const u16 *id)
 /**
 *	ata_port_queue_task - Queue port_task
 *	@ap: The ata_port to queue port_task for
+ *	@fn: workqueue function to be scheduled
+ *	@data: data value to pass to workqueue function
+ *	@delay: delay time for workqueue function
 *
 *	Schedule @fn(@data) for execution after @delay jiffies using
 *	port_task.  There is one port_task per port and it's the
@ -3091,8 +3094,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
 /**
 *	ata_dev_init_params - Issue INIT DEV PARAMS command
 *	@dev: Device to which command will be sent
- *	@heads: Number of heads
- *	@sectors: Number of sectors
+ *	@heads: Number of heads (taskfile parameter)
+ *	@sectors: Number of sectors (taskfile parameter)
 *
 *	LOCKING:
 *	Kernel thread context (may sleep)
@ -5007,6 +5010,7 @@ int ata_device_resume(struct ata_device *dev)
 /**
 *	ata_device_suspend - prepare a device for suspend
 *	@dev: the device to suspend
+ *	@state: target power management state
 *
 *	Flush the cache on the drive, if appropriate, then issue a
 *	standbynow command.
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@ -37,7 +37,7 @@
 #include <asm/io.h>

 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.6"
+#define DRV_VERSION	"0.7"

 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@ -50,6 +50,12 @@ enum {

 	MV_PCI_REG_BASE		= 0,
 	MV_IRQ_COAL_REG_BASE	= 0x18000,	/* 6xxx part only */
+	MV_IRQ_COAL_CAUSE		= (MV_IRQ_COAL_REG_BASE + 0x08),
+	MV_IRQ_COAL_CAUSE_LO		= (MV_IRQ_COAL_REG_BASE + 0x88),
+	MV_IRQ_COAL_CAUSE_HI		= (MV_IRQ_COAL_REG_BASE + 0x8c),
+	MV_IRQ_COAL_THRESHOLD		= (MV_IRQ_COAL_REG_BASE + 0xcc),
+	MV_IRQ_COAL_TIME_THRESHOLD	= (MV_IRQ_COAL_REG_BASE + 0xd0),
+
 	MV_SATAHC0_REG_BASE	= 0x20000,
 	MV_FLASH_CTL		= 0x1046c,
 	MV_GPIO_PORT_CTL	= 0x104f0,
@ -302,9 +308,6 @@ struct mv_port_priv {
 	dma_addr_t		crpb_dma;
 	struct mv_sg		*sg_tbl;
 	dma_addr_t		sg_tbl_dma;
-
-	unsigned		req_producer;		/* cp of req_in_ptr */
-	unsigned		rsp_consumer;		/* cp of rsp_out_ptr */
 	u32			pp_flags;
 };

@ -937,8 +940,6 @@ static int mv_port_start(struct ata_port *ap)
 	writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
 		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);

-	pp->req_producer = pp->rsp_consumer = 0;
-
 	/* Don't turn on EDMA here...do it before DMA commands only.  Else
 	 * we'll be unable to send non-data, PIO, etc due to restricted access
 	 * to shadow regs.
@ -1022,16 +1023,16 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
 	}
 }

-static inline unsigned mv_inc_q_index(unsigned *index)
+static inline unsigned mv_inc_q_index(unsigned index)
 {
-	*index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
-	return *index;
+	return (index + 1) & MV_MAX_Q_DEPTH_MASK;
 }

 static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
 {
-	*cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+	u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
 		(last ? CRQB_CMD_LAST : 0);
+	*cmdw = cpu_to_le16(tmp);
 }

 /**
@ -1053,15 +1054,11 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	u16 *cw;
 	struct ata_taskfile *tf;
 	u16 flags = 0;
+	unsigned in_index;

 	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;

-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
-
 	/* Fill in command request block
 	 */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@ -1069,13 +1066,17 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;

-	pp->crqb[pp->req_producer].sg_addr =
-		cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
-	pp->crqb[pp->req_producer].sg_addr_hi =
-		cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
-	pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+	/* get current queue index from hardware */
+	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;

-	cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+	pp->crqb[in_index].sg_addr =
+		cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
+	pp->crqb[in_index].sg_addr_hi =
+		cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
+	pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
+
+	cw = &pp->crqb[in_index].ata_cmd[0];
 	tf = &qc->tf;

 	/* Sadly, the CRQB cannot accomodate all registers--there are
@ -1144,16 +1145,12 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	struct mv_port_priv *pp = ap->private_data;
 	struct mv_crqb_iie *crqb;
 	struct ata_taskfile *tf;
+	unsigned in_index;
 	u32 flags = 0;

 	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;

-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
-
 	/* Fill in Gen IIE command request block
 	 */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@ -1162,7 +1159,11 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;

-	crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+	/* get current queue index from hardware */
+	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+	crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
 	crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
 	crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
 	crqb->flags = cpu_to_le32(flags);
@ -1210,6 +1211,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 {
 	void __iomem *port_mmio = mv_ap_base(qc->ap);
 	struct mv_port_priv *pp = qc->ap->private_data;
+	unsigned in_index;
 	u32 in_ptr;

 	if (ATA_PROT_DMA != qc->tf.protocol) {
@ -1221,23 +1223,20 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 		return ata_qc_issue_prot(qc);
 	}

-	in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	in_ptr   = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;

-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
 	/* until we do queuing, the queue should be empty at this point */
-	WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+	WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+		>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));

-	mv_inc_q_index(&pp->req_producer);	/* now incr producer index */
+	in_index = mv_inc_q_index(in_index);	/* now incr producer index */

 	mv_start_dma(port_mmio, pp);

 	/* and write the request in pointer to kick the EDMA to life */
 	in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
-	in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+	in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
 	writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);

 	return 0;
@ -1260,28 +1259,26 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
+	unsigned out_index;
 	u32 out_ptr;
 	u8 ata_status;

-	out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	out_ptr   = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;

-	/* the response consumer index should be the same as we remember it */
-	WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->rsp_consumer);
-
-	ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+	ata_status = le16_to_cpu(pp->crpb[out_index].flags)
+					>> CRPB_FLAG_STATUS_SHIFT;

 	/* increment our consumer index... */
-	pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+	out_index = mv_inc_q_index(out_index);

 	/* and, until we do NCQ, there should only be 1 CRPB waiting */
-	WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
-		  EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->rsp_consumer);
+	WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+		>> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));

 	/* write out our inc'd consumer index so EDMA knows we're caught up */
 	out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
-	out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+	out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
 	writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);

 	/* Return ATA status register for completed CRPB */
@ -1291,6 +1288,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 /**
 *      mv_err_intr - Handle error interrupts on the port
 *      @ap: ATA channel to manipulate
+ *      @reset_allowed: bool: 0 == don't trigger from reset here
 *
 *      In most cases, just clear the interrupt and move on.  However,
 *      some cases require an eDMA reset, which is done right before
@ -1301,7 +1299,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 *      LOCKING:
 *      Inherited from caller.
 */
-static void mv_err_intr(struct ata_port *ap)
+static void mv_err_intr(struct ata_port *ap, int reset_allowed)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	u32 edma_err_cause, serr = 0;
@ -1323,9 +1321,8 @@ static void mv_err_intr(struct ata_port *ap)
 	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);

 	/* check for fatal here and recover if needed */
-	if (EDMA_ERR_FATAL & edma_err_cause) {
+	if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
 		mv_stop_and_reset(ap);
-	}
 }

 /**
@ -1374,12 +1371,12 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 		struct ata_port *ap = host_set->ports[port];
 		struct mv_port_priv *pp = ap->private_data;

-		hard_port = port & MV_PORT_MASK;	/* range 0-3 */
+		hard_port = mv_hardport_from_port(port); /* range 0..3 */
 		handled = 0;	/* ensure ata_status is set if handled++ */

 		/* Note that DEV_IRQ might happen spuriously during EDMA,
-		 * and should be ignored in such cases.  We could mask it,
-		 * but it's pretty rare and may not be worth the overhead.
+		 * and should be ignored in such cases.
+		 * The cause of this is still under investigation.
 		 */ 
 		if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
 			/* EDMA: check for response queue interrupt */
@ -1393,6 +1390,11 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 				ata_status = readb((void __iomem *)
 					   ap->ioaddr.status_addr);
 				handled = 1;
+				/* ignore spurious intr if drive still BUSY */
+				if (ata_status & ATA_BUSY) {
+					ata_status = 0;
+					handled = 0;
+				}
 			}
 		}

@ -1406,7 +1408,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 			shift++;	/* skip bit 8 in the HC Main IRQ reg */
 		}
 		if ((PORT0_ERR << shift) & relevant) {
-			mv_err_intr(ap);
+			mv_err_intr(ap, 1);
 			err_mask |= AC_ERR_OTHER;
 			handled = 1;
 		}
@ -1448,6 +1450,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
 	struct ata_host_set *host_set = dev_instance;
 	unsigned int hc, handled = 0, n_hcs;
 	void __iomem *mmio = host_set->mmio_base;
+	struct mv_host_priv *hpriv;
 	u32 irq_stat;

 	irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
@ -1469,6 +1472,17 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
 			handled++;
 		}
 	}
+
+	hpriv = host_set->private_data;
+	if (IS_60XX(hpriv)) {
+		/* deal with the interrupt coalescing bits */
+		if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
+		}
+	}
+
 	if (PCI_ERR & irq_stat) {
 		printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
 		       readl(mmio + PCI_IRQ_CAUSE_OFS));
@ -1867,7 +1881,8 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,

 	if (IS_60XX(hpriv)) {
 		u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
-		ifctl |= (1 << 12) | (1 << 7);
+		ifctl |= (1 << 7);		/* enable gen2i speed */
+		ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
 		writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
 	}

@ -2033,11 +2048,14 @@ static void mv_eng_timeout(struct ata_port *ap)
 	       ap->host_set->mmio_base, ap, qc, qc->scsicmd,
 	       &qc->scsicmd->cmnd);

-	mv_err_intr(ap);
+	mv_err_intr(ap, 0);
 	mv_stop_and_reset(ap);

-	qc->err_mask |= AC_ERR_TIMEOUT;
-	ata_eh_qc_complete(qc);
+	WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
+	if (qc->flags & ATA_QCFLAG_ACTIVE) {
+		qc->err_mask |= AC_ERR_TIMEOUT;
+		ata_eh_qc_complete(qc);
+	}
 }

 /**
@ -2231,7 +2249,8 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
 			void __iomem *port_mmio = mv_port_base(mmio, port);

 			u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
-			ifctl |= (1 << 12);
+			ifctl |= (1 << 7);		/* enable gen2i speed */
+			ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
 			writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
 		}

@ -2332,6 +2351,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc) {
 		return rc;
 	}
+	pci_set_master(pdev);

 	rc = pci_request_regions(pdev, DRV_NAME);
 	if (rc) {
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@ -1907,9 +1907,12 @@ uart_set_options(struct uart_port *port, struct console *co,
 static void uart_change_pm(struct uart_state *state, int pm_state)
 {
 	struct uart_port *port = state->port;
-	if (port->ops->pm)
-		port->ops->pm(port, pm_state, state->pm_state);
-	state->pm_state = pm_state;
+
+	if (state->pm_state != pm_state) {
+		if (port->ops->pm)
+			port->ops->pm(port, pm_state, state->pm_state);
+		state->pm_state = pm_state;
+	}
 }

 int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@ -75,6 +75,14 @@ config SPI_BUTTERFLY
 	  inexpensive battery powered microcontroller evaluation board.
 	  This same cable can be used to flash new firmware.

+config SPI_PXA2XX
+	tristate "PXA2xx SSP SPI master"
+	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+	help
+	  This enables using a PXA2xx SSP port as a SPI master controller.
+	  The driver can be configured to use any SSP port and additional
+	  documentation can be found a Documentation/spi/pxa2xx.
+
 #
 # Add new SPI master controllers in alphabetical order above this line
 #
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@ -13,6 +13,7 @@ obj-$(CONFIG_SPI_MASTER)		+= spi.o
 # SPI master controller drivers (bus)
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 # 	... add above this line ...

 # SPI protocol drivers (device/link on bus)
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master);
 int __init_or_module
 spi_register_master(struct spi_master *master)
 {
-	static atomic_t		dyn_bus_id = ATOMIC_INIT(0);
+	static atomic_t		dyn_bus_id = ATOMIC_INIT((1<<16) - 1);
 	struct device		*dev = master->cdev.dev;
 	int			status = -ENODEV;
 	int			dynamic = 0;
@ -404,7 +404,7 @@ spi_register_master(struct spi_master *master)
 		return -ENODEV;

 	/* convention:  dynamically assigned bus IDs count down from the max */
-	if (master->bus_num == 0) {
+	if (master->bus_num < 0) {
 		master->bus_num = atomic_dec_return(&dyn_bus_id);
 		dynamic = 1;
 	}
@ -522,7 +522,8 @@ int spi_sync(struct spi_device *spi, struct spi_message *message)
 }
 EXPORT_SYMBOL_GPL(spi_sync);

-#define	SPI_BUFSIZ	(SMP_CACHE_BYTES)
+/* portable code must never pass more than 32 bytes */
+#define	SPI_BUFSIZ	max(32,SMP_CACHE_BYTES)

 static u8	*buf;

--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@ -138,6 +138,45 @@ static unsigned bitbang_txrx_32(
 	return t->len - count;
 }

+int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct spi_bitbang_cs	*cs = spi->controller_state;
+	u8			bits_per_word;
+	u32			hz;
+
+	if (t) {
+		bits_per_word = t->bits_per_word;
+		hz = t->speed_hz;
+	} else {
+		bits_per_word = 0;
+		hz = 0;
+	}
+
+	/* spi_transfer level calls that work per-word */
+	if (!bits_per_word)
+		bits_per_word = spi->bits_per_word;
+	if (bits_per_word <= 8)
+		cs->txrx_bufs = bitbang_txrx_8;
+	else if (bits_per_word <= 16)
+		cs->txrx_bufs = bitbang_txrx_16;
+	else if (bits_per_word <= 32)
+		cs->txrx_bufs = bitbang_txrx_32;
+	else
+		return -EINVAL;
+
+	/* nsecs = (clock period)/2 */
+	if (!hz)
+		hz = spi->max_speed_hz;
+	if (hz) {
+		cs->nsecs = (1000000000/2) / hz;
+		if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer);
+
 /**
 * spi_bitbang_setup - default setup for per-word I/O loops
 */
@ -145,8 +184,16 @@ int spi_bitbang_setup(struct spi_device *spi)
 {
 	struct spi_bitbang_cs	*cs = spi->controller_state;
 	struct spi_bitbang	*bitbang;
+	int			retval;

-	if (!spi->max_speed_hz)
+	bitbang = spi_master_get_devdata(spi->master);
+
+	/* REVISIT: some systems will want to support devices using lsb-first
+	 * bit encodings on the wire.  In pure software that would be trivial,
+	 * just bitbang_txrx_le_cphaX() routines shifting the other way, and
+	 * some hardware controllers also have this support.
+	 */
+	if ((spi->mode & SPI_LSB_FIRST) != 0)
 		return -EINVAL;

 	if (!cs) {
@ -155,32 +202,20 @@ int spi_bitbang_setup(struct spi_device *spi)
 			return -ENOMEM;
 		spi->controller_state = cs;
 	}
-	bitbang = spi_master_get_devdata(spi->master);

 	if (!spi->bits_per_word)
 		spi->bits_per_word = 8;

-	/* spi_transfer level calls that work per-word */
-	if (spi->bits_per_word <= 8)
-		cs->txrx_bufs = bitbang_txrx_8;
-	else if (spi->bits_per_word <= 16)
-		cs->txrx_bufs = bitbang_txrx_16;
-	else if (spi->bits_per_word <= 32)
-		cs->txrx_bufs = bitbang_txrx_32;
-	else
-		return -EINVAL;
-
 	/* per-word shift register access, in hardware or bitbanging */
 	cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
 	if (!cs->txrx_word)
 		return -EINVAL;

-	/* nsecs = (clock period)/2 */
-	cs->nsecs = (1000000000/2) / (spi->max_speed_hz);
-	if (cs->nsecs > MAX_UDELAY_MS * 1000)
-		return -EINVAL;
+	retval = spi_bitbang_setup_transfer(spi, NULL);
+	if (retval < 0)
+		return retval;

-	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
 			__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
 			spi->bits_per_word, 2 * cs->nsecs);

@ -246,6 +281,8 @@ static void bitbang_work(void *_bitbang)
 		unsigned		tmp;
 		unsigned		cs_change;
 		int			status;
+		int			(*setup_transfer)(struct spi_device *,
+						struct spi_transfer *);

 		m = container_of(bitbang->queue.next, struct spi_message,
 				queue);
@ -262,6 +299,7 @@ static void bitbang_work(void *_bitbang)
 		tmp = 0;
 		cs_change = 1;
 		status = 0;
+		setup_transfer = NULL;

 		list_for_each_entry (t, &m->transfers, transfer_list) {
 			if (bitbang->shutdown) {
@ -269,6 +307,20 @@ static void bitbang_work(void *_bitbang)
 				break;
 			}

+			/* override or restore speed and wordsize */
+			if (t->speed_hz || t->bits_per_word) {
+				setup_transfer = bitbang->setup_transfer;
+				if (!setup_transfer) {
+					status = -ENOPROTOOPT;
+					break;
+				}
+			}
+			if (setup_transfer) {
+				status = setup_transfer(spi, t);
+				if (status < 0)
+					break;
+			}
+
 			/* set up default clock polarity, and activate chip;
 			 * this implicitly updates clock and spi modes as
 			 * previously recorded for this device via setup().
@ -325,6 +377,10 @@ static void bitbang_work(void *_bitbang)
 		m->status = status;
 		m->complete(m->context);

+		/* restore speed and wordsize */
+		if (setup_transfer)
+			setup_transfer(spi, NULL);
+
 		/* normally deactivate chipselect ... unless no error and
 		 * cs_change has hinted that the next message will probably
 		 * be for this chip too.
@ -348,6 +404,7 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
 {
 	struct spi_bitbang	*bitbang;
 	unsigned long		flags;
+	int			status = 0;

 	m->actual_length = 0;
 	m->status = -EINPROGRESS;
@ -357,11 +414,15 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
 		return -ESHUTDOWN;

 	spin_lock_irqsave(&bitbang->lock, flags);
-	list_add_tail(&m->queue, &bitbang->queue);
-	queue_work(bitbang->workqueue, &bitbang->work);
+	if (!spi->max_speed_hz)
+		status = -ENETDOWN;
+	else {
+		list_add_tail(&m->queue, &bitbang->queue);
+		queue_work(bitbang->workqueue, &bitbang->work);
+	}
 	spin_unlock_irqrestore(&bitbang->lock, flags);

-	return 0;
+	return status;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_transfer);

@ -406,6 +467,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 		bitbang->use_dma = 0;
 		bitbang->txrx_bufs = spi_bitbang_bufs;
 		if (!bitbang->master->setup) {
+			if (!bitbang->setup_transfer)
+				bitbang->setup_transfer =
+					 spi_bitbang_setup_transfer;
 			bitbang->master->setup = spi_bitbang_setup;
 			bitbang->master->cleanup = spi_bitbang_cleanup;
 		}
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@ -29,12 +29,15 @@ static ssize_t backlight_show_power(struct class_device *cdev, char *buf)

 static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc = -ENXIO, power;
+	int rc = -ENXIO;
 	char *endp;
 	struct backlight_device *bd = to_backlight_device(cdev);
+	int power = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;

-	power = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;

 	down(&bd->sem);
@ -65,12 +68,15 @@ static ssize_t backlight_show_brightness(struct class_device *cdev, char *buf)

 static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc = -ENXIO, brightness;
+	int rc = -ENXIO;
 	char *endp;
 	struct backlight_device *bd = to_backlight_device(cdev);
+	int brightness = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;

-	brightness = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;

 	down(&bd->sem);
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@ -31,12 +31,15 @@ static ssize_t lcd_show_power(struct class_device *cdev, char *buf)

 static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc, power;
+	int rc = -ENXIO;
 	char *endp;
 	struct lcd_device *ld = to_lcd_device(cdev);
+	int power = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;

-	power = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;

 	down(&ld->sem);
@ -44,8 +47,7 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_
 		pr_debug("lcd: set power to %d\n", power);
 		ld->props->set_power(ld, power);
 		rc = count;
-	} else
-		rc = -ENXIO;
+	}
 	up(&ld->sem);

 	return rc;
@ -53,14 +55,12 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_

 static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)
 {
-	int rc;
+	int rc = -ENXIO;
 	struct lcd_device *ld = to_lcd_device(cdev);

 	down(&ld->sem);
 	if (likely(ld->props && ld->props->get_contrast))
 		rc = sprintf(buf, "%d\n", ld->props->get_contrast(ld));
-	else
-		rc = -ENXIO;
 	up(&ld->sem);

 	return rc;
@ -68,12 +68,15 @@ static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)

 static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc, contrast;
+	int rc = -ENXIO;
 	char *endp;
 	struct lcd_device *ld = to_lcd_device(cdev);
+	int contrast = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;

-	contrast = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;

 	down(&ld->sem);
@ -81,8 +84,7 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si
 		pr_debug("lcd: set contrast to %d\n", contrast);
 		ld->props->set_contrast(ld, contrast);
 		rc = count;
-	} else
-		rc = -ENXIO;
+	}
 	up(&ld->sem);

 	return rc;
@ -90,14 +92,12 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si

 static ssize_t lcd_show_max_contrast(struct class_device *cdev, char *buf)
 {
-	int rc;
+	int rc = -ENXIO;
 	struct lcd_device *ld = to_lcd_device(cdev);

 	down(&ld->sem);
 	if (likely(ld->props))
 		rc = sprintf(buf, "%d\n", ld->props->max_contrast);
-	else
-		rc = -ENXIO;
 	up(&ld->sem);

 	return rc;
--- a/fs/9p/fcall.c
+++ b/fs/9p/fcall.c
@ -98,23 +98,20 @@ v9fs_t_attach(struct v9fs_session_info *v9ses, char *uname, char *aname,
 static void v9fs_t_clunk_cb(void *a, struct v9fs_fcall *tc,
 	struct v9fs_fcall *rc, int err)
 {
-	int fid;
+	int fid, id;
 	struct v9fs_session_info *v9ses;

-	if (err)
-		return;
-
+	id = 0;
 	fid = tc->params.tclunk.fid;
+	if (rc)
+		id = rc->id;
+
 	kfree(tc);
-
-	if (!rc)
-		return;
-
-	v9ses = a;
-	if (rc->id == RCLUNK)
-		v9fs_put_idpool(fid, &v9ses->fidpool);
-
 	kfree(rc);
+	if (id == RCLUNK) {
+		v9ses = a;
+		v9fs_put_idpool(fid, &v9ses->fidpool);
+	}
 }

 /**
--- a/fs/9p/mux.c
+++ b/fs/9p/mux.c
@ -50,15 +50,23 @@ enum {
 	Wpending = 8,		/* can write */
 };

+enum {
+	None,
+	Flushing,
+	Flushed,
+};
+
 struct v9fs_mux_poll_task;

 struct v9fs_req {
+	spinlock_t lock;
 	int tag;
 	struct v9fs_fcall *tcall;
 	struct v9fs_fcall *rcall;
 	int err;
 	v9fs_mux_req_callback cb;
 	void *cba;
+	int flush;
 	struct list_head req_list;
 };

@ -96,8 +104,8 @@ struct v9fs_mux_poll_task {

 struct v9fs_mux_rpc {
 	struct v9fs_mux_data *m;
-	struct v9fs_req *req;
 	int err;
+	struct v9fs_fcall *tcall;
 	struct v9fs_fcall *rcall;
 	wait_queue_head_t wqueue;
 };
@ -524,10 +532,9 @@ again:

 static void process_request(struct v9fs_mux_data *m, struct v9fs_req *req)
 {
-	int ecode, tag;
+	int ecode;
 	struct v9fs_str *ename;

-	tag = req->tag;
 	if (!req->err && req->rcall->id == RERROR) {
 		ecode = req->rcall->params.rerror.errno;
 		ename = &req->rcall->params.rerror.error;
@ -553,23 +560,6 @@ static void process_request(struct v9fs_mux_data *m, struct v9fs_req *req)
 		if (!req->err)
 			req->err = -EIO;
 	}
-
-	if (req->err == ERREQFLUSH)
-		return;
-
-	if (req->cb) {
-		dprintk(DEBUG_MUX, "calling callback tcall %p rcall %p\n",
-			req->tcall, req->rcall);
-
-		(*req->cb) (req->cba, req->tcall, req->rcall, req->err);
-		req->cb = NULL;
-	} else
-		kfree(req->rcall);
-
-	v9fs_mux_put_tag(m, tag);
-
-	wake_up(&m->equeue);
-	kfree(req);
 }

 /**
@ -669,17 +659,26 @@ static void v9fs_read_work(void *a)
 		list_for_each_entry_safe(rreq, rptr, &m->req_list, req_list) {
 			if (rreq->tag == rcall->tag) {
 				req = rreq;
-				req->rcall = rcall;
-				list_del(&req->req_list);
-				spin_unlock(&m->lock);
-				process_request(m, req);
+				if (req->flush != Flushing)
+					list_del(&req->req_list);
 				break;
 			}
-
 		}
+		spin_unlock(&m->lock);

-		if (!req) {
-			spin_unlock(&m->lock);
+		if (req) {
+			req->rcall = rcall;
+			process_request(m, req);
+
+			if (req->flush != Flushing) {
+				if (req->cb)
+					(*req->cb) (req, req->cba);
+				else
+					kfree(req->rcall);
+
+				wake_up(&m->equeue);
+			}
+		} else {
 			if (err >= 0 && rcall->id != RFLUSH)
 				dprintk(DEBUG_ERROR,
 					"unexpected response mux %p id %d tag %d\n",
@ -746,7 +745,6 @@ static struct v9fs_req *v9fs_send_request(struct v9fs_mux_data *m,
 		return ERR_PTR(-ENOMEM);

 	v9fs_set_tag(tc, n);
-
 	if ((v9fs_debug_level&DEBUG_FCALL) == DEBUG_FCALL) {
 		char buf[150];

@ -754,12 +752,14 @@ static struct v9fs_req *v9fs_send_request(struct v9fs_mux_data *m,
 		printk(KERN_NOTICE "<<< %p %s\n", m, buf);
 	}

+	spin_lock_init(&req->lock);
 	req->tag = n;
 	req->tcall = tc;
 	req->rcall = NULL;
 	req->err = 0;
 	req->cb = cb;
 	req->cba = cba;
+	req->flush = None;

 	spin_lock(&m->lock);
 	list_add_tail(&req->req_list, &m->unsent_req_list);
@ -776,72 +776,108 @@ static struct v9fs_req *v9fs_send_request(struct v9fs_mux_data *m,
 	return req;
 }

-static void v9fs_mux_flush_cb(void *a, struct v9fs_fcall *tc,
-			      struct v9fs_fcall *rc, int err)
+static void v9fs_mux_free_request(struct v9fs_mux_data *m, struct v9fs_req *req)
+{
+	v9fs_mux_put_tag(m, req->tag);
+	kfree(req);
+}
+
+static void v9fs_mux_flush_cb(struct v9fs_req *freq, void *a)
 {
 	v9fs_mux_req_callback cb;
 	int tag;
 	struct v9fs_mux_data *m;
-	struct v9fs_req *req, *rptr;
+	struct v9fs_req *req, *rreq, *rptr;

 	m = a;
-	dprintk(DEBUG_MUX, "mux %p tc %p rc %p err %d oldtag %d\n", m, tc,
-		rc, err, tc->params.tflush.oldtag);
+	dprintk(DEBUG_MUX, "mux %p tc %p rc %p err %d oldtag %d\n", m,
+		freq->tcall, freq->rcall, freq->err,
+		freq->tcall->params.tflush.oldtag);

 	spin_lock(&m->lock);
 	cb = NULL;
-	tag = tc->params.tflush.oldtag;
-	list_for_each_entry_safe(req, rptr, &m->req_list, req_list) {
-		if (req->tag == tag) {
+	tag = freq->tcall->params.tflush.oldtag;
+	req = NULL;
+	list_for_each_entry_safe(rreq, rptr, &m->req_list, req_list) {
+		if (rreq->tag == tag) {
+			req = rreq;
 			list_del(&req->req_list);
-			if (req->cb) {
-				cb = req->cb;
-				req->cb = NULL;
-				spin_unlock(&m->lock);
-				(*cb) (req->cba, req->tcall, req->rcall,
-				       req->err);
-			}
-			kfree(req);
-			wake_up(&m->equeue);
 			break;
 		}
 	}
+	spin_unlock(&m->lock);

-	if (!cb)
-		spin_unlock(&m->lock);
+	if (req) {
+		spin_lock(&req->lock);
+		req->flush = Flushed;
+		spin_unlock(&req->lock);

-	v9fs_mux_put_tag(m, tag);
-	kfree(tc);
-	kfree(rc);
+		if (req->cb)
+			(*req->cb) (req, req->cba);
+		else
+			kfree(req->rcall);
+
+		wake_up(&m->equeue);
+	}
+
+	kfree(freq->tcall);
+	kfree(freq->rcall);
+	v9fs_mux_free_request(m, freq);
 }

-static void
+static int
 v9fs_mux_flush_request(struct v9fs_mux_data *m, struct v9fs_req *req)
 {
 	struct v9fs_fcall *fc;
+	struct v9fs_req *rreq, *rptr;

 	dprintk(DEBUG_MUX, "mux %p req %p tag %d\n", m, req, req->tag);

+	/* if a response was received for a request, do nothing */
+	spin_lock(&req->lock);
+	if (req->rcall || req->err) {
+		spin_unlock(&req->lock);
+		dprintk(DEBUG_MUX, "mux %p req %p response already received\n", m, req);
+		return 0;
+	}
+
+	req->flush = Flushing;
+	spin_unlock(&req->lock);
+
+	spin_lock(&m->lock);
+	/* if the request is not sent yet, just remove it from the list */
+	list_for_each_entry_safe(rreq, rptr, &m->unsent_req_list, req_list) {
+		if (rreq->tag == req->tag) {
+			dprintk(DEBUG_MUX, "mux %p req %p request is not sent yet\n", m, req);
+			list_del(&rreq->req_list);
+			req->flush = Flushed;
+			spin_unlock(&m->lock);
+			if (req->cb)
+				(*req->cb) (req, req->cba);
+			return 0;
+		}
+	}
+	spin_unlock(&m->lock);
+
+	clear_thread_flag(TIF_SIGPENDING);
 	fc = v9fs_create_tflush(req->tag);
 	v9fs_send_request(m, fc, v9fs_mux_flush_cb, m);
+	return 1;
 }

 static void
-v9fs_mux_rpc_cb(void *a, struct v9fs_fcall *tc, struct v9fs_fcall *rc, int err)
+v9fs_mux_rpc_cb(struct v9fs_req *req, void *a)
 {
 	struct v9fs_mux_rpc *r;

-	if (err == ERREQFLUSH) {
-		kfree(rc);
-		dprintk(DEBUG_MUX, "err req flush\n");
-		return;
-	}
-
+	dprintk(DEBUG_MUX, "req %p r %p\n", req, a);
 	r = a;
-	dprintk(DEBUG_MUX, "mux %p req %p tc %p rc %p err %d\n", r->m, r->req,
-		tc, rc, err);
-	r->rcall = rc;
-	r->err = err;
+	r->rcall = req->rcall;
+	r->err = req->err;
+
+	if (req->flush!=None && !req->err)
+		r->err = -ERESTARTSYS;
+
 	wake_up(&r->wqueue);
 }

@ -856,12 +892,13 @@ int
 v9fs_mux_rpc(struct v9fs_mux_data *m, struct v9fs_fcall *tc,
 	     struct v9fs_fcall **rc)
 {
-	int err;
+	int err, sigpending;
 	unsigned long flags;
 	struct v9fs_req *req;
 	struct v9fs_mux_rpc r;

 	r.err = 0;
+	r.tcall = tc;
 	r.rcall = NULL;
 	r.m = m;
 	init_waitqueue_head(&r.wqueue);
@ -869,48 +906,50 @@ v9fs_mux_rpc(struct v9fs_mux_data *m, struct v9fs_fcall *tc,
 	if (rc)
 		*rc = NULL;

+	sigpending = 0;
+	if (signal_pending(current)) {
+		sigpending = 1;
+		clear_thread_flag(TIF_SIGPENDING);
+	}
+
 	req = v9fs_send_request(m, tc, v9fs_mux_rpc_cb, &r);
 	if (IS_ERR(req)) {
 		err = PTR_ERR(req);
 		dprintk(DEBUG_MUX, "error %d\n", err);
-		return PTR_ERR(req);
+		return err;
 	}

-	r.req = req;
-	dprintk(DEBUG_MUX, "mux %p tc %p tag %d rpc %p req %p\n", m, tc,
-		req->tag, &r, req);
 	err = wait_event_interruptible(r.wqueue, r.rcall != NULL || r.err < 0);
 	if (r.err < 0)
 		err = r.err;

 	if (err == -ERESTARTSYS && m->trans->status == Connected && m->err == 0) {
-		spin_lock(&m->lock);
-		req->tcall = NULL;
-		req->err = ERREQFLUSH;
-		spin_unlock(&m->lock);
+		if (v9fs_mux_flush_request(m, req)) {
+			/* wait until we get response of the flush message */
+			do {
+				clear_thread_flag(TIF_SIGPENDING);
+				err = wait_event_interruptible(r.wqueue,
+					r.rcall || r.err);
+			} while (!r.rcall && !r.err && err==-ERESTARTSYS &&
+				m->trans->status==Connected && !m->err);
+		}
+		sigpending = 1;
+	}

-		clear_thread_flag(TIF_SIGPENDING);
-		v9fs_mux_flush_request(m, req);
+	if (sigpending) {
 		spin_lock_irqsave(&current->sighand->siglock, flags);
 		recalc_sigpending();
 		spin_unlock_irqrestore(&current->sighand->siglock, flags);
 	}

-	if (!err) {
-		if (r.rcall)
-			dprintk(DEBUG_MUX, "got response id %d tag %d\n",
-				r.rcall->id, r.rcall->tag);
-
-		if (rc)
-			*rc = r.rcall;
-		else
-			kfree(r.rcall);
-	} else {
+	if (rc)
+		*rc = r.rcall;
+	else
 		kfree(r.rcall);
-		dprintk(DEBUG_MUX, "got error %d\n", err);
-		if (err > 0)
-			err = -EIO;
-	}
+
+	v9fs_mux_free_request(m, req);
+	if (err > 0)
+		err = -EIO;

 	return err;
 }
@ -951,12 +990,15 @@ void v9fs_mux_cancel(struct v9fs_mux_data *m, int err)
 	struct v9fs_req *req, *rtmp;
 	LIST_HEAD(cancel_list);

-	dprintk(DEBUG_MUX, "mux %p err %d\n", m, err);
+	dprintk(DEBUG_ERROR, "mux %p err %d\n", m, err);
 	m->err = err;
 	spin_lock(&m->lock);
 	list_for_each_entry_safe(req, rtmp, &m->req_list, req_list) {
 		list_move(&req->req_list, &cancel_list);
 	}
+	list_for_each_entry_safe(req, rtmp, &m->unsent_req_list, req_list) {
+		list_move(&req->req_list, &cancel_list);
+	}
 	spin_unlock(&m->lock);

 	list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
@ -965,11 +1007,9 @@ void v9fs_mux_cancel(struct v9fs_mux_data *m, int err)
 			req->err = err;

 		if (req->cb)
-			(*req->cb) (req->cba, req->tcall, req->rcall, req->err);
+			(*req->cb) (req, req->cba);
 		else
 			kfree(req->rcall);
-
-		kfree(req);
 	}

 	wake_up(&m->equeue);
--- a/fs/9p/mux.h
+++ b/fs/9p/mux.h
@ -24,6 +24,7 @@
 */

 struct v9fs_mux_data;
+struct v9fs_req;

 /**
 * v9fs_mux_req_callback - callback function that is called when the
@ -36,8 +37,7 @@ struct v9fs_mux_data;
 * @rc - response call
 * @err - error code (non-zero if error occured)
 */
-typedef void (*v9fs_mux_req_callback)(void *a, struct v9fs_fcall *tc,
-	struct v9fs_fcall *rc, int err);
+typedef void (*v9fs_mux_req_callback)(struct v9fs_req *req, void *a);

 int v9fs_mux_global_init(void);
 void v9fs_mux_global_exit(void);
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@ -72,11 +72,17 @@ int v9fs_file_open(struct inode *inode, struct file *file)
 		return -ENOSPC;
 	}

-	err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, NULL);
+	err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, &fcall);
 	if (err < 0) {
 		dprintk(DEBUG_ERROR, "rewalk didn't work\n");
-		goto put_fid;
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+		else {
+			v9fs_put_idpool(fid, &v9ses->fidpool);
+			goto free_fcall;
+		}
 	}
+	kfree(fcall);

 	/* TODO: do special things for O_EXCL, O_NOFOLLOW, O_SYNC */
 	/* translate open mode appropriately */
@ -109,8 +115,7 @@ int v9fs_file_open(struct inode *inode, struct file *file)
 clunk_fid:
 	v9fs_t_clunk(v9ses, fid);

-put_fid:
-	v9fs_put_idpool(fid, &v9ses->fidpool);
+free_fcall:
 	kfree(fcall);

 	return err;
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@ -270,7 +270,10 @@ v9fs_create(struct v9fs_session_info *v9ses, u32 pfid, char *name, u32 perm,
 	err = v9fs_t_walk(v9ses, pfid, fid, NULL, &fcall);
 	if (err < 0) {
 		PRINT_FCALL_ERROR("clone error", fcall);
-		goto put_fid;
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+		else
+			goto put_fid;
 	}
 	kfree(fcall);

@ -322,6 +325,9 @@ v9fs_clone_walk(struct v9fs_session_info *v9ses, u32 fid, struct dentry *dentry)
 		&fcall);

 	if (err < 0) {
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+
 		PRINT_FCALL_ERROR("walk error", fcall);
 		v9fs_put_idpool(nfid, &v9ses->fidpool);
 		goto error;
@ -640,19 +646,26 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
 	}

 	result = v9fs_t_walk(v9ses, dirfidnum, newfid,
-		(char *)dentry->d_name.name, NULL);
+		(char *)dentry->d_name.name, &fcall);
+
 	if (result < 0) {
-		v9fs_put_idpool(newfid, &v9ses->fidpool);
+		if (fcall && fcall->id == RWALK)
+			v9fs_t_clunk(v9ses, newfid);
+		else
+			v9fs_put_idpool(newfid, &v9ses->fidpool);
+
 		if (result == -ENOENT) {
 			d_add(dentry, NULL);
 			dprintk(DEBUG_VFS,
 				"Return negative dentry %p count %d\n",
 				dentry, atomic_read(&dentry->d_count));
+			kfree(fcall);
 			return NULL;
 		}
 		dprintk(DEBUG_ERROR, "walk error:%d\n", result);
 		goto FreeFcall;
 	}
+	kfree(fcall);

 	result = v9fs_t_stat(v9ses, newfid, &fcall);
 	if (result < 0) {
--- a/fs/Makefile
+++ b/fs/Makefile
@ -45,6 +45,7 @@ obj-$(CONFIG_DNOTIFY)		+= dnotify.o
 obj-$(CONFIG_PROC_FS)		+= proc/
 obj-y				+= partitions/
 obj-$(CONFIG_SYSFS)		+= sysfs/
+obj-$(CONFIG_CONFIGFS_FS)	+= configfs/
 obj-y				+= devpts/

 obj-$(CONFIG_PROFILING)		+= dcookies.o
@ -100,5 +101,4 @@ obj-$(CONFIG_BEFS_FS)		+= befs/
 obj-$(CONFIG_HOSTFS)		+= hostfs/
 obj-$(CONFIG_HPPFS)		+= hppfs/
 obj-$(CONFIG_DEBUG_FS)		+= debugfs/
-obj-$(CONFIG_CONFIGFS_FS)	+= configfs/
 obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@ -74,8 +74,8 @@ struct autofs_wait_queue {
 	struct autofs_wait_queue *next;
 	autofs_wqt_t wait_queue_token;
 	/* We use the following to see what we are waiting for */
-	int hash;
-	int len;
+	unsigned int hash;
+	unsigned int len;
 	char *name;
 	u32 dev;
 	u64 ino;
@ -85,7 +85,6 @@ struct autofs_wait_queue {
 	pid_t tgid;
 	/* This is for status reporting upon return */
 	int status;
-	atomic_t notify;
 	atomic_t wait_ctr;
 };

--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@ -327,6 +327,7 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 {
 	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
+	struct autofs_info *ino = autofs4_dentry_ino(dentry);
 	int oz_mode = autofs4_oz_mode(sbi);
 	unsigned int lookup_type;
 	int status;
@ -340,13 +341,8 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 	if (oz_mode || !lookup_type)
 		goto done;

-	/*
-	 * If a request is pending wait for it.
-	 * If it's a mount then it won't be expired till at least
-	 * a liitle later and if it's an expire then we might need
-	 * to mount it again.
-	 */
-	if (autofs4_ispending(dentry)) {
+	/* If an expire request is pending wait for it. */
+	if (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
 		DPRINTK("waiting for active request %p name=%.*s",
 			dentry, dentry->d_name.len, dentry->d_name.name);

--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@ -189,14 +189,30 @@ static int autofs4_getpath(struct autofs_sb_info *sbi,
 	return len;
 }

+static struct autofs_wait_queue *
+autofs4_find_wait(struct autofs_sb_info *sbi,
+		  char *name, unsigned int hash, unsigned int len)
+{
+	struct autofs_wait_queue *wq;
+
+	for (wq = sbi->queues; wq; wq = wq->next) {
+		if (wq->hash == hash &&
+		    wq->len == len &&
+		    wq->name && !memcmp(wq->name, name, len))
+			break;
+	}
+	return wq;
+}
+
 int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		enum autofs_notify notify)
 {
+	struct autofs_info *ino;
 	struct autofs_wait_queue *wq;
 	char *name;
 	unsigned int len = 0;
 	unsigned int hash = 0;
-	int status;
+	int status, type;

 	/* In catatonic mode, we don't wait for nobody */
 	if (sbi->catatonic)
@ -223,21 +239,41 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		return -EINTR;
 	}

-	for (wq = sbi->queues ; wq ; wq = wq->next) {
-		if (wq->hash == dentry->d_name.hash &&
-		    wq->len == len &&
-		    wq->name && !memcmp(wq->name, name, len))
-			break;
+	wq = autofs4_find_wait(sbi, name, hash, len);
+	ino = autofs4_dentry_ino(dentry);
+	if (!wq && ino && notify == NFY_NONE) {
+		/*
+		 * Either we've betean the pending expire to post it's
+		 * wait or it finished while we waited on the mutex.
+		 * So we need to wait till either, the wait appears
+		 * or the expire finishes.
+		 */
+
+		while (ino->flags & AUTOFS_INF_EXPIRING) {
+			mutex_unlock(&sbi->wq_mutex);
+			schedule_timeout_interruptible(HZ/10);
+			if (mutex_lock_interruptible(&sbi->wq_mutex)) {
+				kfree(name);
+				return -EINTR;
+			}
+			wq = autofs4_find_wait(sbi, name, hash, len);
+			if (wq)
+				break;
+		}
+
+		/*
+		 * Not ideal but the status has already gone. Of the two
+		 * cases where we wait on NFY_NONE neither depend on the
+		 * return status of the wait.
+		 */
+		if (!wq) {
+			kfree(name);
+			mutex_unlock(&sbi->wq_mutex);
+			return 0;
+		}
 	}

 	if (!wq) {
-		/* Can't wait for an expire if there's no mount */
-		if (notify == NFY_NONE && !d_mountpoint(dentry)) {
-			kfree(name);
-			mutex_unlock(&sbi->wq_mutex);
-			return -ENOENT;
-		}
-
 		/* Create a new wait queue */
 		wq = kmalloc(sizeof(struct autofs_wait_queue),GFP_KERNEL);
 		if (!wq) {
@ -263,20 +299,7 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		wq->tgid = current->tgid;
 		wq->status = -EINTR; /* Status return if interrupted */
 		atomic_set(&wq->wait_ctr, 2);
-		atomic_set(&wq->notify, 1);
 		mutex_unlock(&sbi->wq_mutex);
-	} else {
-		atomic_inc(&wq->wait_ctr);
-		mutex_unlock(&sbi->wq_mutex);
-		kfree(name);
-		DPRINTK("existing wait id = 0x%08lx, name = %.*s, nfy=%d",
-			(unsigned long) wq->wait_queue_token, wq->len, wq->name, notify);
-	}
-
-	if (notify != NFY_NONE && atomic_read(&wq->notify)) {
-		int type;
-
-		atomic_dec(&wq->notify);

 		if (sbi->version < 5) {
 			if (notify == NFY_MOUNT)
@ -299,6 +322,12 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,

 		/* autofs4_notify_daemon() may block */
 		autofs4_notify_daemon(sbi, wq, type);
+	} else {
+		atomic_inc(&wq->wait_ctr);
+		mutex_unlock(&sbi->wq_mutex);
+		kfree(name);
+		DPRINTK("existing wait id = 0x%08lx, name = %.*s, nfy=%d",
+			(unsigned long) wq->wait_queue_token, wq->len, wq->name, notify);
 	}

 	/* wq->name is NULL if and only if the lock is already released */
--- a/fs/compat.c
+++ b/fs/compat.c
@ -1913,7 +1913,7 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
 	}

 	if (sigmask) {
-		if (sigsetsize |= sizeof(compat_sigset_t))
+		if (sigsetsize != sizeof(compat_sigset_t))
 			return -EINVAL;
 		if (copy_from_user(&ss32, sigmask, sizeof(ss32)))
 			return -EFAULT;
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@ -505,13 +505,15 @@ static int populate_groups(struct config_group *group)
 	int i;

 	if (group->default_groups) {
-		/* FYI, we're faking mkdir here
+		/*
+		 * FYI, we're faking mkdir here
 		 * I'm not sure we need this semaphore, as we're called
 		 * from our parent's mkdir.  That holds our parent's
 		 * i_mutex, so afaik lookup cannot continue through our
 		 * parent to find us, let alone mess with our tree.
 		 * That said, taking our i_mutex is closer to mkdir
-		 * emulation, and shouldn't hurt. */
+		 * emulation, and shouldn't hurt.
+		 */
 		mutex_lock(&dentry->d_inode->i_mutex);

 		for (i = 0; group->default_groups[i]; i++) {
@ -546,20 +548,34 @@ static void unlink_obj(struct config_item *item)

 		item->ci_group = NULL;
 		item->ci_parent = NULL;
+
+		/* Drop the reference for ci_entry */
 		config_item_put(item);

+		/* Drop the reference for ci_parent */
 		config_group_put(group);
 	}
 }

 static void link_obj(struct config_item *parent_item, struct config_item *item)
 {
-	/* Parent seems redundant with group, but it makes certain
-	 * traversals much nicer. */
+	/*
+	 * Parent seems redundant with group, but it makes certain
+	 * traversals much nicer.
+	 */
 	item->ci_parent = parent_item;
+
+	/*
+	 * We hold a reference on the parent for the child's ci_parent
+	 * link.
+	 */
 	item->ci_group = config_group_get(to_config_group(parent_item));
 	list_add_tail(&item->ci_entry, &item->ci_group->cg_children);

+	/*
+	 * We hold a reference on the child for ci_entry on the parent's
+	 * cg_children
+	 */
 	config_item_get(item);
 }

@ -684,6 +700,10 @@ static void client_drop_item(struct config_item *parent_item,
 	type = parent_item->ci_type;
 	BUG_ON(!type);

+	/*
+	 * If ->drop_item() exists, it is responsible for the
+	 * config_item_put().
+	 */
 	if (type->ct_group_ops && type->ct_group_ops->drop_item)
 		type->ct_group_ops->drop_item(to_config_group(parent_item),
 						item);
@ -694,23 +714,28 @@ static void client_drop_item(struct config_item *parent_item,

 static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 {
-	int ret;
+	int ret, module_got = 0;
 	struct config_group *group;
 	struct config_item *item;
 	struct config_item *parent_item;
 	struct configfs_subsystem *subsys;
 	struct configfs_dirent *sd;
 	struct config_item_type *type;
-	struct module *owner;
+	struct module *owner = NULL;
 	char *name;

-	if (dentry->d_parent == configfs_sb->s_root)
-		return -EPERM;
+	if (dentry->d_parent == configfs_sb->s_root) {
+		ret = -EPERM;
+		goto out;
+	}

 	sd = dentry->d_parent->d_fsdata;
-	if (!(sd->s_type & CONFIGFS_USET_DIR))
-		return -EPERM;
+	if (!(sd->s_type & CONFIGFS_USET_DIR)) {
+		ret = -EPERM;
+		goto out;
+	}

+	/* Get a working ref for the duration of this function */
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	type = parent_item->ci_type;
 	subsys = to_config_group(parent_item)->cg_subsys;
@ -719,15 +744,16 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	if (!type || !type->ct_group_ops ||
 	    (!type->ct_group_ops->make_group &&
 	     !type->ct_group_ops->make_item)) {
-		config_item_put(parent_item);
-		return -EPERM;  /* What lack-of-mkdir returns */
+		ret = -EPERM;  /* Lack-of-mkdir returns -EPERM */
+		goto out_put;
 	}

 	name = kmalloc(dentry->d_name.len + 1, GFP_KERNEL);
 	if (!name) {
-		config_item_put(parent_item);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_put;
 	}
+
 	snprintf(name, dentry->d_name.len + 1, "%s", dentry->d_name.name);

 	down(&subsys->su_sem);
@ -748,40 +774,67 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)

 	kfree(name);
 	if (!item) {
-		config_item_put(parent_item);
-		return -ENOMEM;
+		/*
+		 * If item == NULL, then link_obj() was never called.
+		 * There are no extra references to clean up.
+		 */
+		ret = -ENOMEM;
+		goto out_put;
 	}

-	ret = -EINVAL;
+	/*
+	 * link_obj() has been called (via link_group() for groups).
+	 * From here on out, errors must clean that up.
+	 */
+
 	type = item->ci_type;
-	if (type) {
-		owner = type->ct_owner;
-		if (try_module_get(owner)) {
-			if (group) {
-				ret = configfs_attach_group(parent_item,
-							    item,
-							    dentry);
-			} else {
-				ret = configfs_attach_item(parent_item,
-							   item,
-							   dentry);
-			}
-
-			if (ret) {
-				down(&subsys->su_sem);
-				if (group)
-					unlink_group(group);
-				else
-					unlink_obj(item);
-				client_drop_item(parent_item, item);
-				up(&subsys->su_sem);
-
-				config_item_put(parent_item);
-				module_put(owner);
-			}
-		}
+	if (!type) {
+		ret = -EINVAL;
+		goto out_unlink;
 	}

+	owner = type->ct_owner;
+	if (!try_module_get(owner)) {
+		ret = -EINVAL;
+		goto out_unlink;
+	}
+
+	/*
+	 * I hate doing it this way, but if there is
+	 * an error,  module_put() probably should
+	 * happen after any cleanup.
+	 */
+	module_got = 1;
+
+	if (group)
+		ret = configfs_attach_group(parent_item, item, dentry);
+	else
+		ret = configfs_attach_item(parent_item, item, dentry);
+
+out_unlink:
+	if (ret) {
+		/* Tear down everything we built up */
+		down(&subsys->su_sem);
+		if (group)
+			unlink_group(group);
+		else
+			unlink_obj(item);
+		client_drop_item(parent_item, item);
+		up(&subsys->su_sem);
+
+		if (module_got)
+			module_put(owner);
+	}
+
+out_put:
+	/*
+	 * link_obj()/link_group() took a reference from child->parent,
+	 * so the parent is safely pinned.  We can drop our working
+	 * reference.
+	 */
+	config_item_put(parent_item);
+
+out:
 	return ret;
 }

@ -801,6 +854,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	if (sd->s_type & CONFIGFS_USET_DEFAULT)
 		return -EPERM;

+	/* Get a working ref until we have the child */
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	subsys = to_config_group(parent_item)->cg_subsys;
 	BUG_ON(!subsys);
@ -817,6 +871,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 		return ret;
 	}

+	/* Get a working ref for the duration of this function */
 	item = configfs_get_config_item(dentry);

 	/* Drop reference from above, item already holds one. */
--- a/fs/jffs2/nodelist.c
+++ b/fs/jffs2/nodelist.c
@ -438,7 +438,8 @@ static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info
 	if (c->mtd->point) {
 		err = c->mtd->point(c->mtd, ofs, len, &retlen, &buffer);
 		if (!err && retlen < tn->csize) {
-			JFFS2_WARNING("MTD point returned len too short: %u instead of %u.\n", retlen, tn->csize);
+			JFFS2_WARNING("MTD point returned len too short: %zu "
+					"instead of %u.\n", retlen, tn->csize);
 			c->mtd->unpoint(c->mtd, buffer, ofs, len);
 		} else if (err)
 			JFFS2_WARNING("MTD point failed: error code %d.\n", err);
@ -461,7 +462,8 @@ static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info
 		}

 		if (retlen != len) {
-			JFFS2_ERROR("short read at %#08x: %d instead of %d.\n", ofs, retlen, len);
+			JFFS2_ERROR("short read at %#08x: %zd instead of %d.\n",
+					ofs, retlen, len);
 			err = -EIO;
 			goto free_out;
 		}
--- a/fs/namespace.c
+++ b/fs/namespace.c
@ -899,13 +899,11 @@ static int do_change_type(struct nameidata *nd, int flag)
 /*
 * do loopback mount.
 */
-static int do_loopback(struct nameidata *nd, char *old_name, unsigned long flags, int mnt_flags)
+static int do_loopback(struct nameidata *nd, char *old_name, int recurse)
 {
 	struct nameidata old_nd;
 	struct vfsmount *mnt = NULL;
-	int recurse = flags & MS_REC;
 	int err = mount_is_safe(nd);
-
 	if (err)
 		return err;
 	if (!old_name || !*old_name)
@ -939,7 +937,6 @@ static int do_loopback(struct nameidata *nd, char *old_name, unsigned long flags
 		spin_unlock(&vfsmount_lock);
 		release_mounts(&umount_list);
 	}
-	mnt->mnt_flags = mnt_flags;

 out:
 	up_write(&namespace_sem);
@ -1353,7 +1350,7 @@ long do_mount(char *dev_name, char *dir_name, char *type_page,
 		retval = do_remount(&nd, flags & ~MS_REMOUNT, mnt_flags,
 				    data_page);
 	else if (flags & MS_BIND)
-		retval = do_loopback(&nd, dev_name, flags, mnt_flags);
+		retval = do_loopback(&nd, dev_name, flags & MS_REC);
 	else if (flags & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
 		retval = do_change_type(&nd, flags);
 	else if (flags & MS_MOVE)
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@ -276,13 +276,29 @@ static int ocfs2_writepage(struct page *page, struct writeback_control *wbc)
 	return ret;
 }

+/* This can also be called from ocfs2_write_zero_page() which has done
+ * it's own cluster locking. */
+int ocfs2_prepare_write_nolock(struct inode *inode, struct page *page,
+			       unsigned from, unsigned to)
+{
+	int ret;
+
+	down_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+	ret = block_prepare_write(page, from, to, ocfs2_get_block);
+
+	up_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+	return ret;
+}
+
 /*
 * ocfs2_prepare_write() can be an outer-most ocfs2 call when it is called
 * from loopback.  It must be able to perform its own locking around
 * ocfs2_get_block().
 */
-int ocfs2_prepare_write(struct file *file, struct page *page,
-			unsigned from, unsigned to)
+static int ocfs2_prepare_write(struct file *file, struct page *page,
+			       unsigned from, unsigned to)
 {
 	struct inode *inode = page->mapping->host;
 	int ret;
@ -295,11 +311,7 @@ int ocfs2_prepare_write(struct file *file, struct page *page,
 		goto out;
 	}

-	down_read(&OCFS2_I(inode)->ip_alloc_sem);
-
-	ret = block_prepare_write(page, from, to, ocfs2_get_block);
-
-	up_read(&OCFS2_I(inode)->ip_alloc_sem);
+	ret = ocfs2_prepare_write_nolock(inode, page, from, to);

 	ocfs2_meta_unlock(inode, 0);
 out:
@ -625,11 +637,31 @@ static ssize_t ocfs2_direct_IO(int rw,
 	int ret;

 	mlog_entry_void();
+
+	/*
+	 * We get PR data locks even for O_DIRECT.  This allows
+	 * concurrent O_DIRECT I/O but doesn't let O_DIRECT with
+	 * extending and buffered zeroing writes race.  If they did
+	 * race then the buffered zeroing could be written back after
+	 * the O_DIRECT I/O.  It's one thing to tell people not to mix
+	 * buffered and O_DIRECT writes, but expecting them to
+	 * understand that file extension is also an implicit buffered
+	 * write is too much.  By getting the PR we force writeback of
+	 * the buffered zeroing before proceeding.
+	 */
+	ret = ocfs2_data_lock(inode, 0);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+	ocfs2_data_unlock(inode, 0);
+
 	ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
 					    inode->i_sb->s_bdev, iov, offset,
 					    nr_segs, 
 					    ocfs2_direct_IO_get_blocks,
 					    ocfs2_dio_end_io);
+out:
 	mlog_exit(ret);
 	return ret;
 }
--- a/fs/ocfs2/aops.h
+++ b/fs/ocfs2/aops.h
@ -22,8 +22,8 @@
 #ifndef OCFS2_AOPS_H
 #define OCFS2_AOPS_H

-int ocfs2_prepare_write(struct file *file, struct page *page,
-			unsigned from, unsigned to);
+int ocfs2_prepare_write_nolock(struct inode *inode, struct page *page,
+			       unsigned from, unsigned to);

 struct ocfs2_journal_handle *ocfs2_start_walk_page_trans(struct inode *inode,
 							 struct page *page,
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@ -569,7 +569,7 @@ static int ocfs2_extent_map_insert(struct inode *inode,

 	ret = -ENOMEM;
 	ctxt.new_ent = kmem_cache_alloc(ocfs2_em_ent_cachep,
-					GFP_KERNEL);
+					GFP_NOFS);
 	if (!ctxt.new_ent) {
 		mlog_errno(ret);
 		return ret;
@ -583,14 +583,14 @@ static int ocfs2_extent_map_insert(struct inode *inode,
 		if (ctxt.need_left && !ctxt.left_ent) {
 			ctxt.left_ent =
 				kmem_cache_alloc(ocfs2_em_ent_cachep,
-						 GFP_KERNEL);
+						 GFP_NOFS);
 			if (!ctxt.left_ent)
 				break;
 		}
 		if (ctxt.need_right && !ctxt.right_ent) {
 			ctxt.right_ent =
 				kmem_cache_alloc(ocfs2_em_ent_cachep,
-						 GFP_KERNEL);
+						 GFP_NOFS);
 			if (!ctxt.right_ent)
 				break;
 		}
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@ -613,7 +613,8 @@ leave:

 /* Some parts of this taken from generic_cont_expand, which turned out
 * to be too fragile to do exactly what we need without us having to
- * worry about recursive locking in ->commit_write(). */
+ * worry about recursive locking in ->prepare_write() and
+ * ->commit_write(). */
 static int ocfs2_write_zero_page(struct inode *inode,
 				 u64 size)
 {
@ -641,7 +642,7 @@ static int ocfs2_write_zero_page(struct inode *inode,
 		goto out;
 	}

-	ret = ocfs2_prepare_write(NULL, page, offset, offset);
+	ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
 	if (ret < 0) {
 		mlog_errno(ret);
 		goto out_unlock;
@ -695,13 +696,26 @@ out:
 	return ret;
 }

+/* 
+ * A tail_to_skip value > 0 indicates that we're being called from
+ * ocfs2_file_aio_write(). This has the following implications:
+ *
+ * - we don't want to update i_size
+ * - di_bh will be NULL, which is fine because it's only used in the
+ *   case where we want to update i_size.
+ * - ocfs2_zero_extend() will then only be filling the hole created
+ *   between i_size and the start of the write.
+ */
 static int ocfs2_extend_file(struct inode *inode,
 			     struct buffer_head *di_bh,
-			     u64 new_i_size)
+			     u64 new_i_size,
+			     size_t tail_to_skip)
 {
 	int ret = 0;
 	u32 clusters_to_add;

+	BUG_ON(!tail_to_skip && !di_bh);
+
 	/* setattr sometimes calls us like this. */
 	if (new_i_size == 0)
 		goto out;
@ -714,27 +728,44 @@ static int ocfs2_extend_file(struct inode *inode,
 		OCFS2_I(inode)->ip_clusters;

 	if (clusters_to_add) {
+		/* 
+		 * protect the pages that ocfs2_zero_extend is going to
+		 * be pulling into the page cache.. we do this before the
+		 * metadata extend so that we don't get into the situation
+		 * where we've extended the metadata but can't get the data
+		 * lock to zero.
+		 */
+		ret = ocfs2_data_lock(inode, 1);
+		if (ret < 0) {
+			mlog_errno(ret);
+			goto out;
+		}
+
 		ret = ocfs2_extend_allocation(inode, clusters_to_add);
 		if (ret < 0) {
 			mlog_errno(ret);
-			goto out;
+			goto out_unlock;
 		}

-		ret = ocfs2_zero_extend(inode, new_i_size);
+		ret = ocfs2_zero_extend(inode, (u64)new_i_size - tail_to_skip);
 		if (ret < 0) {
 			mlog_errno(ret);
-			goto out;
+			goto out_unlock;
 		}
-	} 
-
-	/* No allocation required, we just use this helper to
-	 * do a trivial update of i_size. */
-	ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out;
 	}

+	if (!tail_to_skip) {
+		/* We're being called from ocfs2_setattr() which wants
+		 * us to update i_size */
+		ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
+		if (ret < 0)
+			mlog_errno(ret);
+	}
+
+out_unlock:
+	if (clusters_to_add) /* this is the only case in which we lock */
+		ocfs2_data_unlock(inode, 1);
+
 out:
 	return ret;
 }
@ -793,7 +824,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 		if (i_size_read(inode) > attr->ia_size)
 			status = ocfs2_truncate_file(inode, bh, attr->ia_size);
 		else
-			status = ocfs2_extend_file(inode, bh, attr->ia_size);
+			status = ocfs2_extend_file(inode, bh, attr->ia_size, 0);
 		if (status < 0) {
 			if (status != -ENOSPC)
 				mlog_errno(status);
@ -1049,21 +1080,12 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
 		if (!clusters)
 			break;

-		ret = ocfs2_extend_allocation(inode, clusters);
+		ret = ocfs2_extend_file(inode, NULL, newsize, count);
 		if (ret < 0) {
 			if (ret != -ENOSPC)
 				mlog_errno(ret);
 			goto out;
 		}
-
-		/* Fill any holes which would've been created by this
-		 * write. If we're O_APPEND, this will wind up
-		 * (correctly) being a noop. */
-		ret = ocfs2_zero_extend(inode, (u64) newsize - count);
-		if (ret < 0) {
-			mlog_errno(ret);
-			goto out;
-		}
 		break;
 	}

@ -1146,6 +1168,22 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
 		ocfs2_iocb_set_rw_locked(iocb);
 	}

+	/*
+	 * We're fine letting folks race truncates and extending
+	 * writes with read across the cluster, just like they can
+	 * locally. Hence no rw_lock during read.
+	 * 
+	 * Take and drop the meta data lock to update inode fields
+	 * like i_size. This allows the checks down below
+	 * generic_file_aio_read() a chance of actually working. 
+	 */
+	ret = ocfs2_meta_lock(inode, NULL, NULL, 0);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto bail;
+	}
+	ocfs2_meta_unlock(inode, 0);
+
 	ret = generic_file_aio_read(iocb, buf, count, iocb->ki_pos);
 	if (ret == -EINVAL)
 		mlog(ML_ERROR, "generic_file_aio_read returned -EINVAL\n");
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@ -117,7 +117,7 @@ struct ocfs2_journal_handle *ocfs2_alloc_handle(struct ocfs2_super *osb)
 {
 	struct ocfs2_journal_handle *retval = NULL;

-	retval = kcalloc(1, sizeof(*retval), GFP_KERNEL);
+	retval = kcalloc(1, sizeof(*retval), GFP_NOFS);
 	if (!retval) {
 		mlog(ML_ERROR, "Failed to allocate memory for journal "
 		     "handle!\n");
@ -870,9 +870,11 @@ static int ocfs2_force_read_journal(struct inode *inode)
 		if (p_blocks > CONCURRENT_JOURNAL_FILL)
 			p_blocks = CONCURRENT_JOURNAL_FILL;

+		/* We are reading journal data which should not
+		 * be put in the uptodate cache */
 		status = ocfs2_read_blocks(OCFS2_SB(inode->i_sb),
 					   p_blkno, p_blocks, bhs, 0,
-					   inode);
+					   NULL);
 		if (status < 0) {
 			mlog_errno(status);
 			goto bail;
@ -982,7 +984,7 @@ static void ocfs2_queue_recovery_completion(struct ocfs2_journal *journal,
 {
 	struct ocfs2_la_recovery_item *item;

-	item = kmalloc(sizeof(struct ocfs2_la_recovery_item), GFP_KERNEL);
+	item = kmalloc(sizeof(struct ocfs2_la_recovery_item), GFP_NOFS);
 	if (!item) {
 		/* Though we wish to avoid it, we are in fact safe in
 		 * skipping local alloc cleanup as fsck.ocfs2 is more
--- a/fs/ocfs2/uptodate.c
+++ b/fs/ocfs2/uptodate.c
@ -337,7 +337,7 @@ static void __ocfs2_set_buffer_uptodate(struct ocfs2_inode_info *oi,
 	     (unsigned long long)oi->ip_blkno,
 	     (unsigned long long)block, expand_tree);

-	new = kmem_cache_alloc(ocfs2_uptodate_cachep, GFP_KERNEL);
+	new = kmem_cache_alloc(ocfs2_uptodate_cachep, GFP_NOFS);
 	if (!new) {
 		mlog_errno(-ENOMEM);
 		return;
@ -349,7 +349,7 @@ static void __ocfs2_set_buffer_uptodate(struct ocfs2_inode_info *oi,
 		 * has no way of tracking that. */
 		for(i = 0; i < OCFS2_INODE_MAX_CACHE_ARRAY; i++) {
 			tree[i] = kmem_cache_alloc(ocfs2_uptodate_cachep,
-						   GFP_KERNEL);
+						   GFP_NOFS);
 			if (!tree[i]) {
 				mlog_errno(-ENOMEM);
 				goto out_free;
--- a/fs/ocfs2/vote.c
+++ b/fs/ocfs2/vote.c
@ -586,7 +586,7 @@ static struct ocfs2_net_wait_ctxt *ocfs2_new_net_wait_ctxt(unsigned int response
 {
 	struct ocfs2_net_wait_ctxt *w;

-	w = kcalloc(1, sizeof(*w), GFP_KERNEL);
+	w = kcalloc(1, sizeof(*w), GFP_NOFS);
 	if (!w) {
 		mlog_errno(-ENOMEM);
 		goto bail;
@ -749,7 +749,7 @@ static struct ocfs2_vote_msg * ocfs2_new_vote_request(struct ocfs2_super *osb,

 	BUG_ON(!ocfs2_is_valid_vote_request(type));

-	request = kcalloc(1, sizeof(*request), GFP_KERNEL);
+	request = kcalloc(1, sizeof(*request), GFP_NOFS);
 	if (!request) {
 		mlog_errno(-ENOMEM);
 	} else {
@ -1129,7 +1129,7 @@ static int ocfs2_handle_vote_message(struct o2net_msg *msg,
 	struct ocfs2_super *osb = data;
 	struct ocfs2_vote_work *work;

-	work = kmalloc(sizeof(struct ocfs2_vote_work), GFP_KERNEL);
+	work = kmalloc(sizeof(struct ocfs2_vote_work), GFP_NOFS);
 	if (!work) {
 		status = -ENOMEM;
 		mlog_errno(status);
--- a/Show More
+++ b/Show More