From 4360fa22ad5b48a1d1e10e31ffb383ed8c977435 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 6 Jun 2016 11:02:03 +0200 Subject: [PATCH 1/6] drivers: misc: ti-st: Use int instead of fuzzy char for callback status On mips and parisc: drivers/bluetooth/btwilink.c: In function 'ti_st_open': drivers/bluetooth/btwilink.c:174:21: warning: overflow in implicit constant conversion [-Woverflow] hst->reg_status = -EINPROGRESS; drivers/nfc/nfcwilink.c: In function 'nfcwilink_open': drivers/nfc/nfcwilink.c:396:31: warning: overflow in implicit constant conversion [-Woverflow] drv->st_register_cb_status = -EINPROGRESS; There are actually two issues: 1. Whether "char" is signed or unsigned depends on the architecture. As the completion callback data is used to pass a (negative) error code, it should always be signed. 2. EINPROGRESS is 150 on mips, 245 on parisc. Hence -EINPROGRESS doesn't fit in a signed 8-bit number. Change the callback status from "char" to "int" to fix these. Signed-off-by: Geert Uytterhoeven Acked-by: Mauro Carvalho Chehab Acked-by: Samuel Ortiz Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btwilink.c | 4 ++-- drivers/media/radio/wl128x/fmdrv_common.c | 2 +- drivers/misc/ti-st/st_core.c | 2 +- drivers/nfc/nfcwilink.c | 4 ++-- include/linux/ti_wilink_st.h | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c index 24a652f9252b..485281b3f167 100644 --- a/drivers/bluetooth/btwilink.c +++ b/drivers/bluetooth/btwilink.c @@ -51,7 +51,7 @@ */ struct ti_st { struct hci_dev *hdev; - char reg_status; + int reg_status; long (*st_write) (struct sk_buff *); struct completion wait_reg_completion; }; @@ -83,7 +83,7 @@ static inline void ti_st_tx_complete(struct ti_st *hst, int pkt_type) * status.ti_st_open() function will wait for signal from this * API when st_register() function returns ST_PENDING. */ -static void st_reg_completion_cb(void *priv_data, char data) +static void st_reg_completion_cb(void *priv_data, int data) { struct ti_st *lhst = priv_data; diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c index 3f9e6df7d837..642b89c66bcb 100644 --- a/drivers/media/radio/wl128x/fmdrv_common.c +++ b/drivers/media/radio/wl128x/fmdrv_common.c @@ -1472,7 +1472,7 @@ static long fm_st_receive(void *arg, struct sk_buff *skb) * Called by ST layer to indicate protocol registration completion * status. */ -static void fm_st_reg_comp_cb(void *arg, char data) +static void fm_st_reg_comp_cb(void *arg, int data) { struct fmdev *fmdev; diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index dcdbd58672cc..00051590e00f 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -141,7 +141,7 @@ static void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata) * This function is being called with spin lock held, protocol drivers are * only expected to complete their waits and do nothing more than that. */ -static void st_reg_complete(struct st_data_s *st_gdata, char err) +static void st_reg_complete(struct st_data_s *st_gdata, int err) { unsigned char i = 0; pr_info(" %s ", __func__); diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c index f81e500e7650..3fbd18b8e473 100644 --- a/drivers/nfc/nfcwilink.c +++ b/drivers/nfc/nfcwilink.c @@ -94,7 +94,7 @@ struct nfcwilink { struct nci_dev *ndev; unsigned long flags; - char st_register_cb_status; + int st_register_cb_status; long (*st_write) (struct sk_buff *); struct completion completed; @@ -320,7 +320,7 @@ exit: } /* Called by ST when registration is complete */ -static void nfcwilink_register_complete(void *priv_data, char data) +static void nfcwilink_register_complete(void *priv_data, int data) { struct nfcwilink *drv = priv_data; diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h index 0a0d56834c8e..f2293028ab9d 100644 --- a/include/linux/ti_wilink_st.h +++ b/include/linux/ti_wilink_st.h @@ -71,7 +71,7 @@ struct st_proto_s { enum proto_type type; long (*recv) (void *, struct sk_buff *); unsigned char (*match_packet) (const unsigned char *data); - void (*reg_complete_cb) (void *, char data); + void (*reg_complete_cb) (void *, int data); long (*write) (struct sk_buff *skb); void *priv_data; From 23bc6ab0a0912146fd674a0becc758c3162baabc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Amadeusz=20S=C5=82awi=C5=84ski?= Date: Thu, 14 Jul 2016 10:50:23 +0200 Subject: [PATCH 2/6] Bluetooth: Fix l2cap_sock_setsockopt() with optname BT_RCVMTU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by: Amadeusz Sławiński Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org --- net/bluetooth/l2cap_sock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 388ee8b59145..1842141baedb 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -927,7 +927,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; } - if (get_user(opt, (u32 __user *) optval)) { + if (get_user(opt, (u16 __user *) optval)) { err = -EFAULT; break; } From f962fe32f2f85769cd835ddcecbff8c1d34cf561 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 17 Jul 2016 19:55:15 +0200 Subject: [PATCH 3/6] Bluetooth: Move hci_recv_frame and hci_recv_diag prototypes The protoypes for hci_recv_frame and hci_recv_diag are in the wrong location in the header file. Move them close to all the other hci_dev related exported functions. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 77d7fe115a0d..84d0273d826a 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1022,6 +1022,8 @@ void hci_unregister_dev(struct hci_dev *hdev); int hci_suspend_dev(struct hci_dev *hdev); int hci_resume_dev(struct hci_dev *hdev); int hci_reset_dev(struct hci_dev *hdev); +int hci_recv_frame(struct hci_dev *hdev, struct sk_buff *skb); +int hci_recv_diag(struct hci_dev *hdev, struct sk_buff *skb); int hci_dev_open(__u16 dev); int hci_dev_close(__u16 dev); int hci_dev_do_close(struct hci_dev *hdev); @@ -1098,9 +1100,6 @@ int hci_remove_adv_instance(struct hci_dev *hdev, u8 instance); void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb); -int hci_recv_frame(struct hci_dev *hdev, struct sk_buff *skb); -int hci_recv_diag(struct hci_dev *hdev, struct sk_buff *skb); - void hci_init_sysfs(struct hci_dev *hdev); void hci_conn_init_sysfs(struct hci_conn *conn); void hci_conn_add_sysfs(struct hci_conn *conn); From 5177a83827cd0b8cf6ce0391b00dd4417352d2f1 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 17 Jul 2016 19:55:16 +0200 Subject: [PATCH 4/6] Bluetooth: Add debugfs fields for hardware and firmware info Some Bluetooth controllers allow for reading hardware and firmware related vendor specific infos. If they are available, then they can be exposed via debugfs now. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 4 ++++ net/bluetooth/hci_core.c | 24 ++++++++++++++++++++++ net/bluetooth/hci_debugfs.c | 35 ++++++++++++++++++++++++++++++++ 3 files changed, 63 insertions(+) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 84d0273d826a..ee7fc47680a1 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -372,6 +372,8 @@ struct hci_dev { atomic_t promisc; + const char *hw_info; + const char *fw_info; struct dentry *debugfs; struct device dev; @@ -1024,6 +1026,8 @@ int hci_resume_dev(struct hci_dev *hdev); int hci_reset_dev(struct hci_dev *hdev); int hci_recv_frame(struct hci_dev *hdev, struct sk_buff *skb); int hci_recv_diag(struct hci_dev *hdev, struct sk_buff *skb); +void hci_set_hw_info(struct hci_dev *hdev, const char *fmt, ...); +void hci_set_fw_info(struct hci_dev *hdev, const char *fmt, ...); int hci_dev_open(__u16 dev); int hci_dev_close(__u16 dev); int hci_dev_do_close(struct hci_dev *hdev); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 98f6c3770736..ddf8432fe8fb 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -3163,6 +3163,8 @@ void hci_unregister_dev(struct hci_dev *hdev) device_del(&hdev->dev); debugfs_remove_recursive(hdev->debugfs); + kfree_const(hdev->hw_info); + kfree_const(hdev->fw_info); destroy_workqueue(hdev->workqueue); destroy_workqueue(hdev->req_workqueue); @@ -3266,6 +3268,28 @@ int hci_recv_diag(struct hci_dev *hdev, struct sk_buff *skb) } EXPORT_SYMBOL(hci_recv_diag); +void hci_set_hw_info(struct hci_dev *hdev, const char *fmt, ...) +{ + va_list vargs; + + va_start(vargs, fmt); + kfree_const(hdev->hw_info); + hdev->hw_info = kvasprintf_const(GFP_KERNEL, fmt, vargs); + va_end(vargs); +} +EXPORT_SYMBOL(hci_set_hw_info); + +void hci_set_fw_info(struct hci_dev *hdev, const char *fmt, ...) +{ + va_list vargs; + + va_start(vargs, fmt); + kfree_const(hdev->fw_info); + hdev->fw_info = kvasprintf_const(GFP_KERNEL, fmt, vargs); + va_end(vargs); +} +EXPORT_SYMBOL(hci_set_fw_info); + /* ---- Interface to upper protocols ---- */ int hci_register_cb(struct hci_cb *cb) diff --git a/net/bluetooth/hci_debugfs.c b/net/bluetooth/hci_debugfs.c index 7db4220941cc..63df63ebfb24 100644 --- a/net/bluetooth/hci_debugfs.c +++ b/net/bluetooth/hci_debugfs.c @@ -76,6 +76,30 @@ static const struct file_operations __name ## _fops = { \ .llseek = default_llseek, \ } \ +#define DEFINE_INFO_ATTRIBUTE(__name, __field) \ +static int __name ## _show(struct seq_file *f, void *ptr) \ +{ \ + struct hci_dev *hdev = f->private; \ + \ + hci_dev_lock(hdev); \ + seq_printf(f, "%s\n", hdev->__field ? : ""); \ + hci_dev_unlock(hdev); \ + \ + return 0; \ +} \ + \ +static int __name ## _open(struct inode *inode, struct file *file) \ +{ \ + return single_open(file, __name ## _show, inode->i_private); \ +} \ + \ +static const struct file_operations __name ## _fops = { \ + .open = __name ## _open, \ + .read = seq_read, \ + .llseek = seq_lseek, \ + .release = single_release, \ +} \ + static int features_show(struct seq_file *f, void *ptr) { struct hci_dev *hdev = f->private; @@ -349,6 +373,9 @@ static const struct file_operations sc_only_mode_fops = { .llseek = default_llseek, }; +DEFINE_INFO_ATTRIBUTE(hardware_info, hw_info); +DEFINE_INFO_ATTRIBUTE(firmware_info, fw_info); + void hci_debugfs_create_common(struct hci_dev *hdev) { debugfs_create_file("features", 0444, hdev->debugfs, hdev, @@ -382,6 +409,14 @@ void hci_debugfs_create_common(struct hci_dev *hdev) if (lmp_sc_capable(hdev) || lmp_le_capable(hdev)) debugfs_create_file("sc_only_mode", 0444, hdev->debugfs, hdev, &sc_only_mode_fops); + + if (hdev->hw_info) + debugfs_create_file("hardware_info", 0444, hdev->debugfs, + hdev, &hardware_info_fops); + + if (hdev->fw_info) + debugfs_create_file("firmware_info", 0444, hdev->debugfs, + hdev, &firmware_info_fops); } static int inquiry_cache_show(struct seq_file *f, void *p) From b2999c195bb5cec1a1c713f17c7f382bbcdb8b39 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 17 Jul 2016 19:55:17 +0200 Subject: [PATCH 5/6] Bluetooth: bpa10x: Add support for hci_set_fw_info The Digianswer sniffer devices allow for reading a firmware specific information string. If it is available, then inform the Bluetooth core about it via hci_set_fw_info. That exposes it via debugfs like this: # cat /sys/kernel/debug/bluetooth/hci0/firmware_info SNIF_102,BB930,02/01/18,10:37:56 Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- drivers/bluetooth/bpa10x.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c index fd6b53e9bbf2..a9932fe57d92 100644 --- a/drivers/bluetooth/bpa10x.c +++ b/drivers/bluetooth/bpa10x.c @@ -274,6 +274,8 @@ static int bpa10x_setup(struct hci_dev *hdev) BT_INFO("%s: %s", hdev->name, (char *)(skb->data + 1)); + hci_set_fw_info(hdev, "%s", skb->data + 1); + kfree_skb(skb); return 0; } From e7acf43024e95faa7460e77fe7e0fec2a3de582a Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 15 Jul 2016 16:20:52 +0530 Subject: [PATCH 6/6] Bluetooth: btmrvl: reset is_suspending flag in failure path is_suspending flag remains on when host sleep fails to enable. Data path is unnecessarily blocked after this. This patch ensures to reset the flag in failure path. Signed-off-by: Amitkumar Karwar Signed-off-by: Marcel Holtmann --- drivers/bluetooth/btmrvl_sdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index b7c3928cf494..d02f2c14df32 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -1625,6 +1625,7 @@ static int btmrvl_sdio_suspend(struct device *dev) if (priv->adapter->hs_state != HS_ACTIVATED) { if (btmrvl_enable_hs(priv)) { BT_ERR("HS not actived, suspend failed!"); + priv->adapter->is_suspending = false; return -EBUSY; } }