From c56c81abe7e684bc6203632d807303eb765690dc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 8 Apr 2009 15:08:23 -0700 Subject: [PATCH 001/670] dmatest: fix max channels handling The check for reaching max_channels is short circuited by 'continuing' after successfully adding a channel. [ Impact: make the 'max_channels' module parameter actually have an effect ] Cc: Reported-by: Dan Carpenter Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index a27c0fb1bc11..fb7da5141e96 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -531,9 +531,7 @@ static int __init dmatest_init(void) chan = dma_request_channel(mask, filter, NULL); if (chan) { err = dmatest_add_channel(chan); - if (err == 0) - continue; - else { + if (err) { dma_release_channel(chan); break; /* add_channel failed, punt */ } From 295c01f90db2b8b8394e1f7cde59b96d71f98e07 Mon Sep 17 00:00:00 2001 From: Christian Hohnstaedt Date: Sun, 12 Apr 2009 13:01:44 +0800 Subject: [PATCH 002/670] crypto: ixp4xx - check firmware for crypto support - the loaded firmware may not support crypto at all or only support DES and 3DES but not AES or support DES, 3DES and AES. - in case of no crypto support of the firmware, the module load will fail. - in case of missing AES support, the AES algorithms are not registered and a warning is printed during module load. Signed-off-by: Christian Hohnstaedt Signed-off-by: Herbert Xu --- drivers/crypto/ixp4xx_crypto.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index af9761ccf9f1..9224c1f49311 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -415,6 +415,7 @@ static void crypto_done_action(unsigned long arg) static int init_ixp_crypto(void) { int ret = -ENODEV; + u32 msg[2] = { 0, 0 }; if (! ( ~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH | IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) { @@ -426,9 +427,35 @@ static int init_ixp_crypto(void) return ret; if (!npe_running(npe_c)) { - npe_load_firmware(npe_c, npe_name(npe_c), dev); + ret = npe_load_firmware(npe_c, npe_name(npe_c), dev); + if (ret) { + return ret; + } + if (npe_recv_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; + } else { + if (npe_send_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; + + if (npe_recv_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; } + switch ((msg[1]>>16) & 0xff) { + case 3: + printk(KERN_WARNING "Firmware of %s lacks AES support\n", + npe_name(npe_c)); + support_aes = 0; + break; + case 4: + case 5: + support_aes = 1; + break; + default: + printk(KERN_ERR "Firmware of %s lacks crypto support\n", + npe_name(npe_c)); + return -ENODEV; + } /* buffer_pool will also be used to sometimes store the hmac, * so assure it is large enough */ @@ -459,6 +486,10 @@ static int init_ixp_crypto(void) qmgr_enable_irq(RECV_QID); return 0; + +npe_error: + printk(KERN_ERR "%s not responding\n", npe_name(npe_c)); + ret = -EIO; err: if (ctx_pool) dma_pool_destroy(ctx_pool); From abe5fa7899fb5809ddc7336d8dd0edd5b2b96665 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 15 Apr 2009 20:45:03 +0800 Subject: [PATCH 003/670] crypto: eseqiv - Fix IV generation for sync algorithms If crypto_ablkcipher_encrypt() returns synchronous, eseqiv_complete2() is called even if req->giv is already the pointer to the generated IV. The generated IV is overwritten with some random data in this case. This patch fixes this by calling eseqiv_complete2() just if the generated IV has to be copied to req->giv. Signed-off-by: Steffen Klassert Signed-off-by: Herbert Xu --- crypto/eseqiv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/crypto/eseqiv.c b/crypto/eseqiv.c index 2a342c8e52b3..3ca3b669d5d5 100644 --- a/crypto/eseqiv.c +++ b/crypto/eseqiv.c @@ -153,7 +153,8 @@ static int eseqiv_givencrypt(struct skcipher_givcrypt_request *req) if (err) goto out; - eseqiv_complete2(req); + if (giv != req->giv) + eseqiv_complete2(req); out: return err; From 37fc334cc8eb84f5fe0a5a1cbe6a6a68049e142a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 21 Apr 2009 13:27:16 +0800 Subject: [PATCH 004/670] crypto: api - Fix algorithm module auto-loading The commit a760a6656e6f00bb0144a42a048cf0266646e22c (crypto: api - Fix module load deadlock with fallback algorithms) broke the auto-loading of algorithms that require fallbacks. The problem is that the fallback mask check is missing an and which cauess bits that should be considered to interfere with the result. Reported-by: Chuck Ebbert Signed-off-by: Herbert Xu --- crypto/api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/crypto/api.c b/crypto/api.c index 314dab96840e..fd2545decb28 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -221,7 +221,8 @@ struct crypto_alg *crypto_larval_lookup(const char *name, u32 type, u32 mask) request_module(name); - if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) && + if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask & + CRYPTO_ALG_NEED_FALLBACK) && snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp)) request_module(tmp); From acd246b7494c629aa617da49716409566cf52149 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 21 Apr 2009 13:55:20 +0800 Subject: [PATCH 005/670] crypto: padlock - Revert aes-all alias to aes Since the padlock-aes driver doesn't require a fallback (it's only padlock-sha that does), it should use the aes alias rather than aes-all so that ones that do need a fallback can use it. Signed-off-by: Herbert Xu --- drivers/crypto/padlock-aes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index 3f0fdd18255d..856b3cc25583 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -489,4 +489,4 @@ MODULE_DESCRIPTION("VIA PadLock AES algorithm support"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michal Ludvig"); -MODULE_ALIAS("aes-all"); +MODULE_ALIAS("aes"); From 66ab3a74c5ce737effc2c64391e036b0938b1c36 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 21 Apr 2009 11:44:57 +0200 Subject: [PATCH 006/670] CRIS: Merge machine dependent boot/compressed and boot/rescue Merge the machine dependent boot directories for v10 and v32. This avoids some code duplication and eases the way for further merging later on. Signed-off-by: Jesper Nilsson --- arch/cris/Makefile | 14 +- arch/cris/arch-v10/boot/compressed/README | 25 -- arch/cris/arch-v10/boot/compressed/misc.c | 246 ------------------ arch/cris/arch-v32/boot/Makefile | 20 -- arch/cris/arch-v32/boot/compressed/Makefile | 26 -- arch/cris/arch-v32/boot/rescue/Makefile | 26 -- arch/cris/{arch-v10 => }/boot/.gitignore | 0 arch/cris/{arch-v10 => }/boot/Makefile | 8 +- .../{arch-v10 => }/boot/compressed/Makefile | 19 +- .../{arch-v32 => }/boot/compressed/README | 0 .../compressed/decompress_v10.lds} | 0 .../compressed/decompress_v32.lds} | 0 .../head.S => boot/compressed/head_v10.S} | 4 +- .../head.S => boot/compressed/head_v32.S} | 10 +- .../{arch-v32 => }/boot/compressed/misc.c | 191 +++++++++----- arch/cris/{arch-v10 => }/boot/rescue/Makefile | 22 +- .../rescue/head.S => boot/rescue/head_v10.S} | 2 +- .../rescue/head.S => boot/rescue/head_v32.S} | 0 .../{arch-v10 => }/boot/rescue/kimagerescue.S | 0 .../rescue.lds => boot/rescue/rescue_v10.lds} | 0 .../rescue.lds => boot/rescue/rescue_v32.lds} | 0 .../{arch-v10 => }/boot/rescue/testrescue.S | 0 arch/cris/{arch-v10 => }/boot/tools/build.c | 0 23 files changed, 185 insertions(+), 428 deletions(-) delete mode 100644 arch/cris/arch-v10/boot/compressed/README delete mode 100644 arch/cris/arch-v10/boot/compressed/misc.c delete mode 100644 arch/cris/arch-v32/boot/Makefile delete mode 100644 arch/cris/arch-v32/boot/compressed/Makefile delete mode 100644 arch/cris/arch-v32/boot/rescue/Makefile rename arch/cris/{arch-v10 => }/boot/.gitignore (100%) rename arch/cris/{arch-v10 => }/boot/Makefile (65%) rename arch/cris/{arch-v10 => }/boot/compressed/Makefile (50%) rename arch/cris/{arch-v32 => }/boot/compressed/README (100%) rename arch/cris/{arch-v10/boot/compressed/decompress.lds => boot/compressed/decompress_v10.lds} (100%) rename arch/cris/{arch-v32/boot/compressed/decompress.lds => boot/compressed/decompress_v32.lds} (100%) rename arch/cris/{arch-v10/boot/compressed/head.S => boot/compressed/head_v10.S} (97%) rename arch/cris/{arch-v32/boot/compressed/head.S => boot/compressed/head_v32.S} (94%) rename arch/cris/{arch-v32 => }/boot/compressed/misc.c (65%) rename arch/cris/{arch-v10 => }/boot/rescue/Makefile (63%) rename arch/cris/{arch-v10/boot/rescue/head.S => boot/rescue/head_v10.S} (99%) rename arch/cris/{arch-v32/boot/rescue/head.S => boot/rescue/head_v32.S} (100%) rename arch/cris/{arch-v10 => }/boot/rescue/kimagerescue.S (100%) rename arch/cris/{arch-v10/boot/rescue/rescue.lds => boot/rescue/rescue_v10.lds} (100%) rename arch/cris/{arch-v32/boot/rescue/rescue.lds => boot/rescue/rescue_v32.lds} (100%) rename arch/cris/{arch-v10 => }/boot/rescue/testrescue.S (100%) rename arch/cris/{arch-v10 => }/boot/tools/build.c (100%) diff --git a/arch/cris/Makefile b/arch/cris/Makefile index 3662cfb7b61d..71e17d3eeddb 100644 --- a/arch/cris/Makefile +++ b/arch/cris/Makefile @@ -70,7 +70,7 @@ SRC_ARCH = $(srctree)/arch/cris # cris object files path OBJ_ARCH = $(objtree)/arch/cris -boot := arch/cris/$(SARCH)/boot +boot := arch/cris/boot MACHINE := arch/cris/$(SARCH) all: zImage @@ -81,15 +81,15 @@ zImage Image: vmlinux archprepare: archclean: - $(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \ - $(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \ + $(Q)if [ -e arch/cris/boot ]; then \ + $(MAKE) $(clean)=arch/cris/boot; \ fi CLEAN_FILES += \ - $(MACHINE)/boot/zImage \ - $(MACHINE)/boot/compressed/decompress.bin \ - $(MACHINE)/boot/compressed/piggy.gz \ - $(MACHINE)/boot/rescue/rescue.bin + $(boot)/zImage \ + $(boot)/compressed/decompress.bin \ + $(boot)/compressed/piggy.gz \ + $(boot)/rescue/rescue.bin # MRPROPER_FILES += diff --git a/arch/cris/arch-v10/boot/compressed/README b/arch/cris/arch-v10/boot/compressed/README deleted file mode 100644 index 48b3db9924b9..000000000000 --- a/arch/cris/arch-v10/boot/compressed/README +++ /dev/null @@ -1,25 +0,0 @@ -Creation of the self-extracting compressed kernel image (vmlinuz) ------------------------------------------------------------------ -$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $ - -This can be slightly confusing because it's a process with many steps. - -The kernel object built by the arch/etrax100/Makefile, vmlinux, is split -by that makefile into text and data binary files, vmlinux.text and -vmlinux.data. - -Those files together with a ROM filesystem can be catted together and -burned into a flash or executed directly at the DRAM origin. - -They can also be catted together and compressed with gzip, which is what -happens in this makefile. Together they make up piggy.img. - -The decompressor is built into the file decompress.o. It is turned into -the binary file decompress.bin, which is catted together with piggy.img -into the file vmlinuz. It can be executed in an arbitrary place in flash. - -Be careful - it assumes some things about free locations in DRAM. It -assumes the DRAM starts at 0x40000000 and that it is at least 8 MB, -so it puts its code at 0x40700000, and initial stack at 0x40800000. - --Bjorn diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c deleted file mode 100644 index a4db1507d3b1..000000000000 --- a/arch/cris/arch-v10/boot/compressed/misc.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * misc.c - * - * This is a collection of several routines from gzip-1.0.3 - * adapted for Linux. - * - * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 - * puts by Nick Holloway 1993, better puts by Martin Mares 1995 - * adaptation for Linux/CRIS Axis Communications AB, 1999 - * - */ - -/* where the piggybacked kernel image expects itself to live. - * it is the same address we use when we network load an uncompressed - * image into DRAM, and it is the address the kernel is linked to live - * at by vmlinux.lds.S - */ - -#define KERNEL_LOAD_ADR 0x40004000 - - -#include -#include - -/* - * gzip declarations - */ - -#define OF(args) args -#define STATIC static - -void *memset(void *s, int c, size_t n); -void *memcpy(void *__dest, __const void *__src, size_t __n); - -#define memzero(s, n) memset((s), 0, (n)) - -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -unsigned inptr = 0; /* index of next byte to be processed in inbuf - * After decompression it will contain the - * compressed size, and head.S will read it. - */ - -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inbuf[inptr++]) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond, msg) do { \ - if (!(cond)) \ - error(msg); \ - } while (0) -# define Trace(x) fprintf x -# define Tracev(x) do { \ - if (verbose) \ - fprintf x; \ - } while (0) -# define Tracevv(x) do { \ - if (verbose > 1) \ - fprintf x; \ - } while (0) -# define Tracec(c, x) do { \ - if (verbose && (c)) \ - fprintf x; \ - } while (0) -# define Tracecv(c, x) do { \ - if (verbose > 1 && (c)) \ - fprintf x; \ - } while (0) -#else -# define Assert(cond, msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c, x) -# define Tracecv(c, x) -#endif - -static void flush_window(void); -static void error(char *m); - -extern char *input_data; /* lives in head.S */ - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; -static void puts(const char *); - -/* the "heap" is put directly after the BSS ends, at end */ - -extern int _end; -static long free_mem_ptr = (long)&_end; -static long free_mem_end_ptr; - -#include "../../../../../lib/inflate.c" - -/* decompressor info and error messages to serial console */ - -static void -puts(const char *s) -{ -#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL - while (*s) { -#ifdef CONFIG_ETRAX_DEBUG_PORT0 - while (!(*R_SERIAL0_STATUS & (1 << 5))) ; - *R_SERIAL0_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT1 - while (!(*R_SERIAL1_STATUS & (1 << 5))) ; - *R_SERIAL1_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT2 - while (!(*R_SERIAL2_STATUS & (1 << 5))) ; - *R_SERIAL2_TR_DATA = *s++; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT3 - while (!(*R_SERIAL3_STATUS & (1 << 5))) ; - *R_SERIAL3_TR_DATA = *s++; -#endif - } -#endif -} - -void *memset(void *s, int c, size_t n) -{ - int i; - char *ss = (char *)s; - - for (i = 0; i < n; i++) - ss[i] = c; - - return s; -} - -void *memcpy(void *__dest, __const void *__src, size_t __n) -{ - int i; - char *d = (char *)__dest, *s = (char *)__src; - - for (i = 0; i < __n; i++) - d[i] = s[i]; - - return __dest; -} - -/* =========================================================================== - * Write the output window window[0..outcnt-1] and update crc and bytes_out. - * (Used for the decompressed data only.) - */ - -static void flush_window(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out = *in; - out++; - in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void error(char *x) -{ - puts("\n\n"); - puts(x); - puts("\n\n -- System halted\n"); - - while (1); /* Halt */ -} - -void setup_normal_output_buffer(void) -{ - output_data = (char *)KERNEL_LOAD_ADR; -} - -void decompress_kernel(void) -{ - char revision; - - /* input_data is set in head.S */ - inbuf = input_data; - -#ifdef CONFIG_ETRAX_DEBUG_PORT0 - *R_SERIAL0_XOFF = 0; - *R_SERIAL0_BAUD = 0x99; - *R_SERIAL0_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT1 - *R_SERIAL1_XOFF = 0; - *R_SERIAL1_BAUD = 0x99; - *R_SERIAL1_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT2 - *R_GEN_CONFIG = 0x08; - *R_SERIAL2_XOFF = 0; - *R_SERIAL2_BAUD = 0x99; - *R_SERIAL2_TR_CTRL = 0x40; -#endif -#ifdef CONFIG_ETRAX_DEBUG_PORT3 - *R_GEN_CONFIG = 0x100; - *R_SERIAL3_XOFF = 0; - *R_SERIAL3_BAUD = 0x99; - *R_SERIAL3_TR_CTRL = 0x40; -#endif - - setup_normal_output_buffer(); - - makecrc(); - - __asm__ volatile ("move $vr,%0" : "=rm" (revision)); - if (revision < 10) { - puts("You need an ETRAX 100LX to run linux 2.6\n"); - while (1); - } - - puts("Uncompressing Linux...\n"); - gunzip(); - puts("Done. Now booting the kernel.\n"); -} diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile deleted file mode 100644 index 99896ad60b30..000000000000 --- a/arch/cris/arch-v32/boot/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -# -# arch/cris/arch-v32/boot/Makefile -# - -OBJCOPYFLAGS = -O binary -R .note -R .comment - -subdir- := compressed rescue -targets := Image - -$(obj)/Image: vmlinux FORCE - $(call if_changed,objcopy) - @echo ' Kernel: $@ is ready' - -$(obj)/compressed/vmlinux: $(obj)/Image FORCE - $(Q)$(MAKE) $(build)=$(obj)/compressed $@ - $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin - -$(obj)/zImage: $(obj)/compressed/vmlinux - @cp $< $@ - @echo ' Kernel: $@ is ready' diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile deleted file mode 100644 index e176b8b69d92..000000000000 --- a/arch/cris/arch-v32/boot/compressed/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# arch/cris/arch-v32/boot/compressed/Makefile -# - -asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch -ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch -ldflags-y += -T$(srctree)/$(src)/decompress.lds -OBJECTS = $(obj)/head.o $(obj)/misc.o -OBJCOPYFLAGS = -O binary --remove-section=.bss - -quiet_cmd_image = BUILD $@ -cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ - -targets := vmlinux piggy.gz decompress.o decompress.bin - -$(obj)/decompress.o: $(OBJECTS) FORCE - $(call if_changed,ld) - -$(obj)/decompress.bin: $(obj)/decompress.o FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE - $(call if_changed,image) - -$(obj)/piggy.gz: $(obj)/../Image FORCE - $(call if_changed,gzip) diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile deleted file mode 100644 index 566aac663a38..000000000000 --- a/arch/cris/arch-v32/boot/rescue/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for rescue (bootstrap) code -# - -CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) -ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \ - -I $(srctree)/include/asm/arch -asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch -LD = gcc-cris -mlinux -march=v32 -nostdlib -ldflags-y += -T $(srctree)/$(src)/rescue.lds -LDPOSTFLAGS = -lgcc -OBJCOPYFLAGS = -O binary --remove-section=.bss -obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o -OBJECT := $(obj)/head.o - -targets := rescue.o rescue.bin - -quiet_cmd_ldlibgcc = LD $@ -cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@ - -$(obj)/rescue.o: $(OBJECTS) FORCE - $(call if_changed,ldlibgcc) - -$(obj)/rescue.bin: $(obj)/rescue.o FORCE - $(call if_changed,objcopy) - cp -p $(obj)/rescue.bin $(objtree) diff --git a/arch/cris/arch-v10/boot/.gitignore b/arch/cris/boot/.gitignore similarity index 100% rename from arch/cris/arch-v10/boot/.gitignore rename to arch/cris/boot/.gitignore diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/boot/Makefile similarity index 65% rename from arch/cris/arch-v10/boot/Makefile rename to arch/cris/boot/Makefile index 217203014433..144f3afa0119 100644 --- a/arch/cris/arch-v10/boot/Makefile +++ b/arch/cris/boot/Makefile @@ -1,8 +1,12 @@ # -# arch/cris/arch-v10/boot/Makefile +# arch/cris/boot/Makefile # -OBJCOPYFLAGS = -O binary --remove-section=.bss +objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment +objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss + +OBJCOPYFLAGS = -O binary $(objcopyflags-y) + subdir- := compressed rescue targets := Image diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/boot/compressed/Makefile similarity index 50% rename from arch/cris/arch-v10/boot/compressed/Makefile rename to arch/cris/boot/compressed/Makefile index 6fe0ffaf3be6..8fe9338c1775 100644 --- a/arch/cris/arch-v10/boot/compressed/Makefile +++ b/arch/cris/boot/compressed/Makefile @@ -1,11 +1,23 @@ # -# arch/cris/arch-v10/boot/compressed/Makefile +# arch/cris/boot/compressed/Makefile # asflags-y += $(LINUXINCLUDE) ccflags-y += -O2 $(LINUXINCLUDE) -ldflags-y += -T $(srctree)/$(src)/decompress.lds -OBJECTS = $(obj)/head.o $(obj)/misc.o + +# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \ +# -I$(srctree)/include/asm/arch +# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach +# -I$(srctree)/include/asm/arch + +arch-$(CONFIG_ETRAX_ARCH_V10) = v10 +arch-$(CONFIG_ETRAX_ARCH_V32) = v32 + +ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds + +OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o +OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o +OBJECTS= $(OBJECTS-y) $(obj)/misc.o OBJCOPYFLAGS = -O binary --remove-section=.bss quiet_cmd_image = BUILD $@ @@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE $(obj)/piggy.gz: $(obj)/../Image FORCE $(call if_changed,gzip) - diff --git a/arch/cris/arch-v32/boot/compressed/README b/arch/cris/boot/compressed/README similarity index 100% rename from arch/cris/arch-v32/boot/compressed/README rename to arch/cris/boot/compressed/README diff --git a/arch/cris/arch-v10/boot/compressed/decompress.lds b/arch/cris/boot/compressed/decompress_v10.lds similarity index 100% rename from arch/cris/arch-v10/boot/compressed/decompress.lds rename to arch/cris/boot/compressed/decompress_v10.lds diff --git a/arch/cris/arch-v32/boot/compressed/decompress.lds b/arch/cris/boot/compressed/decompress_v32.lds similarity index 100% rename from arch/cris/arch-v32/boot/compressed/decompress.lds rename to arch/cris/boot/compressed/decompress_v32.lds diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/boot/compressed/head_v10.S similarity index 97% rename from arch/cris/arch-v10/boot/compressed/head.S rename to arch/cris/boot/compressed/head_v10.S index 0bb4dcc29254..9edb8ade7e1f 100644 --- a/arch/cris/arch-v10/boot/compressed/head.S +++ b/arch/cris/boot/compressed/head_v10.S @@ -30,7 +30,7 @@ beq dram_init_finished nop -#include "../../lib/dram_init.S" +#include "../../arch-v10/lib/dram_init.S" dram_init_finished: @@ -123,4 +123,4 @@ _cmd_line_magic: .dword 0 _cmd_line_addr: .dword 0 -#include "../../lib/hw_settings.S" +#include "../../arch-v10/lib/hw_settings.S" diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/boot/compressed/head_v32.S similarity index 94% rename from arch/cris/arch-v32/boot/compressed/head.S rename to arch/cris/boot/compressed/head_v32.S index a4a65c5c669e..f483005f3d48 100644 --- a/arch/cris/arch-v32/boot/compressed/head.S +++ b/arch/cris/boot/compressed/head_v32.S @@ -17,7 +17,7 @@ .globl input_data .text -_start: +start: di ;; Start clocks for used blocks. @@ -29,9 +29,9 @@ _start: nop #if defined CONFIG_ETRAXFS -#include "../../mach-fs/dram_init.S" +#include "../../arch-v32/mach-fs/dram_init.S" #elif defined CONFIG_CRIS_MACH_ARTPEC3 -#include "../../mach-a3/dram_init.S" +#include "../../arch-v32/mach-a3/dram_init.S" #else #error Only ETRAXFS and ARTPEC-3 supported! #endif @@ -137,9 +137,9 @@ _boot_source: .dword 0 #if defined CONFIG_ETRAXFS -#include "../../mach-fs/hw_settings.S" +#include "../../arch-v32/mach-fs/hw_settings.S" #elif defined CONFIG_CRIS_MACH_ARTPEC3 -#include "../../mach-a3/hw_settings.S" +#include "../../arch-v32/mach-a3/hw_settings.S" #else #error Only ETRAXFS and ARTPEC-3 supported! #endif diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c similarity index 65% rename from arch/cris/arch-v32/boot/compressed/misc.c rename to arch/cris/boot/compressed/misc.c index 3595e16e82bc..47bc190ba6d4 100644 --- a/arch/cris/arch-v32/boot/compressed/misc.c +++ b/arch/cris/boot/compressed/misc.c @@ -18,8 +18,9 @@ #define KERNEL_LOAD_ADR 0x40004000 - #include + +#ifdef CONFIG_ETRAX_ARCH_V32 #include #include #include @@ -27,6 +28,9 @@ #ifdef CONFIG_CRIS_MACH_ARTPEC3 #include #endif +#else +#include +#endif /* * gzip declarations @@ -35,12 +39,10 @@ #define OF(args) args #define STATIC static -void* memset(void* s, int c, size_t n); -void* memcpy(void* __dest, __const void* __src, - size_t __n); - -#define memzero(s, n) memset ((s), 0, (n)) +void *memset(void *s, int c, size_t n); +void *memcpy(void *__dest, __const void *__src, size_t __n); +#define memzero(s, n) memset((s), 0, (n)) typedef unsigned char uch; typedef unsigned short ush; @@ -68,27 +70,43 @@ static unsigned outcnt = 0; /* bytes in output buffer */ #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ #define RESERVED 0xC0 /* bit 6,7: reserved */ -#define get_byte() inbuf[inptr++] +#define get_byte() (inbuf[inptr++]) /* Diagnostic functions */ #ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} +# define Assert(cond, msg) do { \ + if (!(cond)) \ + error(msg); \ + } while (0) # define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +# define Tracev(x) do { \ + if (verbose) \ + fprintf x; \ + } while (0) +# define Tracevv(x) do { \ + if (verbose > 1) \ + fprintf x; \ + } while (0) +# define Tracec(c, x) do { \ + if (verbose && (c)) \ + fprintf x; \ + } while (0) +# define Tracecv(c, x) do { \ + if (verbose > 1 && (c)) \ + fprintf x; \ + } while (0) #else -# define Assert(cond,msg) +# define Assert(cond, msg) # define Trace(x) # define Tracev(x) # define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) +# define Tracec(c, x) +# define Tracecv(c, x) #endif static void flush_window(void); static void error(char *m); +static void puts(const char *); extern char *input_data; /* lives in head.S */ @@ -96,10 +114,6 @@ static long bytes_out; static uch *output_data; static unsigned long output_ptr; -static void error(char *m); - -static void puts(const char *); - /* the "heap" is put directly after the BSS ends, at end */ extern int _end; @@ -110,8 +124,8 @@ static long free_mem_end_ptr; /* decompressor info and error messages to serial console */ -static inline void -serout(const char *s, reg_scope_instances regi_ser) +#ifdef CONFIG_ETRAX_ARCH_V32 +static inline void serout(const char *s, reg_scope_instances regi_ser) { reg_ser_rs_stat_din rs; reg_ser_rw_dout dout = {.data = *s}; @@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser) REG_WR(ser, regi_ser, rw_dout, dout); } +#endif -static void -puts(const char *s) +static void puts(const char *s) { #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL while (*s) { #ifdef CONFIG_ETRAX_DEBUG_PORT0 +#ifdef CONFIG_ETRAX_ARCH_V32 serout(s, regi_ser0); +#else + while (!(*R_SERIAL0_STATUS & (1 << 5))) + ; + *R_SERIAL0_TR_DATA = *s++; +#endif #endif #ifdef CONFIG_ETRAX_DEBUG_PORT1 +#ifdef CONFIG_ETRAX_ARCH_V32 serout(s, regi_ser1); +#else + while (!(*R_SERIAL1_STATUS & (1 << 5))) + ; + *R_SERIAL1_TR_DATA = *s++; +#endif #endif #ifdef CONFIG_ETRAX_DEBUG_PORT2 +#ifdef CONFIG_ETRAX_ARCH_V32 serout(s, regi_ser2); +#else + while (!(*R_SERIAL2_STATUS & (1 << 5))) + ; + *R_SERIAL2_TR_DATA = *s++; +#endif #endif #ifdef CONFIG_ETRAX_DEBUG_PORT3 +#ifdef CONFIG_ETRAX_ARCH_V32 serout(s, regi_ser3); +#else + while (!(*R_SERIAL3_STATUS & (1 << 5))) + ; + *R_SERIAL3_TR_DATA = *s++; +#endif #endif *s++; } @@ -147,8 +185,7 @@ puts(const char *s) #endif } -void* -memset(void* s, int c, size_t n) +void *memset(void *s, int c, size_t n) { int i; char *ss = (char*)s; @@ -158,14 +195,13 @@ memset(void* s, int c, size_t n) return s; } -void* -memcpy(void* __dest, __const void* __src, - size_t __n) +void *memcpy(void *__dest, __const void *__src, size_t __n) { int i; char *d = (char *)__dest, *s = (char *)__src; - for (i=0;i<__n;i++) d[i] = s[i]; + for (i = 0; i < __n; i++) + d[i] = s[i]; return __dest; } @@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src, * (Used for the decompressed data only.) */ -static void -flush_window() +static void flush_window(void) { - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, *out, ch; - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; + in = window; + out = &output_data[output_ptr]; + for (n = 0; n < outcnt; n++) { + ch = *out = *in; + out++; + in++; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + output_ptr += (ulg)outcnt; + outcnt = 0; } -static void -error(char *x) +static void error(char *x) { - puts("\r\n\n"); + puts("\n\n"); puts(x); - puts("\r\n\n -- System halted\n"); + puts("\n\n -- System halted\n"); while(1); /* Halt */ } -void -setup_normal_output_buffer(void) +void setup_normal_output_buffer(void) { output_data = (char *)KERNEL_LOAD_ADR; } -static inline void -serial_setup(reg_scope_instances regi_ser) +#ifdef CONFIG_ETRAX_ARCH_V32 +static inline void serial_setup(reg_scope_instances regi_ser) { reg_ser_rw_xoff xoff; reg_ser_rw_tr_ctrl tr_ctrl; @@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser) REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud); } +#endif -void -decompress_kernel(void) +void decompress_kernel(void) { char revision; + char compile_rev; +#ifdef CONFIG_ETRAX_ARCH_V32 + /* Need at least a CRISv32 to run. */ + compile_rev = 32; #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \ defined(CONFIG_ETRAX_DEBUG_PORT2) || \ defined(CONFIG_ETRAX_DEBUG_PORT3) @@ -277,6 +316,7 @@ decompress_kernel(void) hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); #endif + #ifdef CONFIG_ETRAX_DEBUG_PORT0 serial_setup(regi_ser0); #endif @@ -300,19 +340,52 @@ decompress_kernel(void) /* input_data is set in head.S */ inbuf = input_data; +#else /* CRISv10 */ + /* Need at least a crisv10 to run. */ + compile_rev = 10; + + /* input_data is set in head.S */ + inbuf = input_data; + +#ifdef CONFIG_ETRAX_DEBUG_PORT0 + *R_SERIAL0_XOFF = 0; + *R_SERIAL0_BAUD = 0x99; + *R_SERIAL0_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT1 + *R_SERIAL1_XOFF = 0; + *R_SERIAL1_BAUD = 0x99; + *R_SERIAL1_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT2 + *R_GEN_CONFIG = 0x08; + *R_SERIAL2_XOFF = 0; + *R_SERIAL2_BAUD = 0x99; + *R_SERIAL2_TR_CTRL = 0x40; +#endif +#ifdef CONFIG_ETRAX_DEBUG_PORT3 + *R_GEN_CONFIG = 0x100; + *R_SERIAL3_XOFF = 0; + *R_SERIAL3_BAUD = 0x99; + *R_SERIAL3_TR_CTRL = 0x40; +#endif +#endif setup_normal_output_buffer(); makecrc(); __asm__ volatile ("move $vr,%0" : "=rm" (revision)); - if (revision < 32) - { - puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n"); + if (revision < compile_rev) { +#ifdef CONFIG_ETRAX_ARCH_V32 + puts("You need an ETRAX FS to run Linux 2.6/crisv32\n"); +#else + puts("You need an ETRAX 100LX to run linux 2.6\n"); +#endif while(1); } - puts("Uncompressing Linux...\r\n"); + puts("Uncompressing Linux...\n"); gunzip(); - puts("Done. Now booting the kernel.\r\n"); + puts("Done. Now booting the kernel\n"); } diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/boot/rescue/Makefile similarity index 63% rename from arch/cris/arch-v10/boot/rescue/Makefile rename to arch/cris/boot/rescue/Makefile index 82ab59b968e5..52bd0bd1dd22 100644 --- a/arch/cris/arch-v10/boot/rescue/Makefile +++ b/arch/cris/boot/rescue/Makefile @@ -2,16 +2,26 @@ # Makefile for rescue (bootstrap) code # -ccflags-y += -O2 $(LINUXINCLUDE) +# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) +# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \ +# -I$(srctree)/include/asm/arch +# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch +# LD = gcc-cris -mlinux -march=v32 -nostdlib + asflags-y += $(LINUXINCLUDE) -ldflags-y += -T $(srctree)/$(src)/rescue.lds +ccflags-y += -O2 $(LINUXINCLUDE) +arch-$(CONFIG_ETRAX_ARCH_V10) = v10 +arch-$(CONFIG_ETRAX_ARCH_V32) = v32 + +ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds OBJCOPYFLAGS = -O binary --remove-section=.bss -obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o -OBJECT := $(obj)/head.o +obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o +obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o +OBJECTS := $(obj-y) targets := rescue.o rescue.bin -$(obj)/rescue.o: $(OBJECT) FORCE +$(obj)/rescue.o: $(OBJECTS) FORCE $(call if_changed,ld) $(obj)/rescue.bin: $(obj)/rescue.o FORCE @@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784 rm tr.bin tmp2423 testrescue_tmp.bin + $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin # Pad it to 784 bytes, that's what the rescue loader expects @@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o cat ktr.bin tmp2423 >kimagerescue_tmp.bin dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784 rm ktr.bin tmp2423 kimagerescue_tmp.bin + diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/boot/rescue/head_v10.S similarity index 99% rename from arch/cris/arch-v10/boot/rescue/head.S rename to arch/cris/boot/rescue/head_v10.S index fb503d1eeea4..2fafe247a25b 100644 --- a/arch/cris/arch-v10/boot/rescue/head.S +++ b/arch/cris/boot/rescue/head_v10.S @@ -155,7 +155,7 @@ no_newjump: #endif ;; We need to setup the bus registers before we start using the DRAM -#include "../../lib/dram_init.S" +#include "../../../arch-v10/lib/dram_init.S" ;; we now should go through the checksum-table and check the listed ;; partitions for errors. diff --git a/arch/cris/arch-v32/boot/rescue/head.S b/arch/cris/boot/rescue/head_v32.S similarity index 100% rename from arch/cris/arch-v32/boot/rescue/head.S rename to arch/cris/boot/rescue/head_v32.S diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S similarity index 100% rename from arch/cris/arch-v10/boot/rescue/kimagerescue.S rename to arch/cris/boot/rescue/kimagerescue.S diff --git a/arch/cris/arch-v10/boot/rescue/rescue.lds b/arch/cris/boot/rescue/rescue_v10.lds similarity index 100% rename from arch/cris/arch-v10/boot/rescue/rescue.lds rename to arch/cris/boot/rescue/rescue_v10.lds diff --git a/arch/cris/arch-v32/boot/rescue/rescue.lds b/arch/cris/boot/rescue/rescue_v32.lds similarity index 100% rename from arch/cris/arch-v32/boot/rescue/rescue.lds rename to arch/cris/boot/rescue/rescue_v32.lds diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/boot/rescue/testrescue.S similarity index 100% rename from arch/cris/arch-v10/boot/rescue/testrescue.S rename to arch/cris/boot/rescue/testrescue.S diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/boot/tools/build.c similarity index 100% rename from arch/cris/arch-v10/boot/tools/build.c rename to arch/cris/boot/tools/build.c From d7bd15f67ebaaebc842a971e600c364a73b81b22 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 21 Apr 2009 13:10:33 +0200 Subject: [PATCH 007/670] CRISv32: Remove obsolete vcs_hook.o from Makefile On Sun, Apr 19, 2009 at 10:01:50PM +0200, Robert P. J. Day wrote: > ./arch/cris/arch-v32/kernel/Makefile:obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o > > there appears to be no definition of ETRAXFS_SIM anywhere. There hasn't been a vcs_hook.c file here for ages. Remove the line from the Makefile. Signed-off-by: Jesper Nilsson Reported-by: "Robert P. J. Day" --- arch/cris/arch-v32/kernel/Makefile | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile index 993d987b0078..40358355d0cb 100644 --- a/arch/cris/arch-v32/kernel/Makefile +++ b/arch/cris/arch-v32/kernel/Makefile @@ -9,8 +9,6 @@ obj-y := entry.o traps.o irq.o debugport.o \ process.o ptrace.o setup.o signal.o traps.o time.o \ cache.o cacheflush.o -obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o - obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o From 818cf5909701806285d977f7a9365c5cadb062a7 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 23 Apr 2009 09:58:22 +0300 Subject: [PATCH 008/670] slub: enforce MAX_ORDER slub_max_order may not be equal to or greater than MAX_ORDER. Additionally, if a single object cannot be placed in a slab of slub_max_order, it still must allocate slabs below MAX_ORDER. Acked-by: Christoph Lameter Signed-off-by: David Rientjes Signed-off-by: Pekka Enberg --- mm/slub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index 7ab54ecbd3f3..0e1247ed2a06 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1909,7 +1909,7 @@ static inline int calculate_order(int size) * Doh this slab cannot be placed using slub_max_order. */ order = slab_order(size, 1, MAX_ORDER, 1); - if (order <= MAX_ORDER) + if (order < MAX_ORDER) return order; return -ENOSYS; } @@ -2522,6 +2522,7 @@ __setup("slub_min_order=", setup_slub_min_order); static int __init setup_slub_max_order(char *str) { get_option(&str, &slub_max_order); + slub_max_order = min(slub_max_order, MAX_ORDER - 1); return 1; } From 45cb50e646d1560eff01c5ad0f0df3c7fd6148dd Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 24 Apr 2009 12:13:18 -0400 Subject: [PATCH 009/670] ACPI video: dmi check for broken _BQC on Acer Aspire 5720 On Acer Aspire 5720, _BQC always returns a value 9 smaller than the actual brightness level. Add dmi quirk for this laptop. http://bugzilla.kernel.org/show_bug.cgi?id=13121 Tested-by: Maxim Levitsky Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index cd4fb7543a90..7e8ee49ebd40 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -538,6 +538,33 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level) return -EINVAL; } +/* + * For some buggy _BQC methods, we need to add a constant value to + * the _BQC return value to get the actual current brightness level + */ + +static int bqc_offset_aml_bug_workaround; +static int __init video_set_bqc_offset(const struct dmi_system_id *d) +{ + bqc_offset_aml_bug_workaround = 9; + return 0; +} + +static struct dmi_system_id video_dmi_table[] __initdata = { + /* + * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121 + */ + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5720", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), + }, + }, + {} +}; + static int acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, unsigned long long *level) @@ -557,6 +584,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, *level = device->brightness->levels[*level + 2]; } + *level += bqc_offset_aml_bug_workaround; device->brightness->curr = *level; return 0; } else { @@ -2287,6 +2315,8 @@ EXPORT_SYMBOL(acpi_video_register); static int __init acpi_video_init(void) { + dmi_check_system(video_dmi_table); + if (intel_opregion_present()) return 0; From d0687be7c7ae21461da4438d5fd059b48487bfe1 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Fri, 3 Apr 2009 15:18:24 -0500 Subject: [PATCH 010/670] svcrdma: Fix dma map direction for rdma read targets The nfs server rdma transport was mapping rdma read target pages for TO_DEVICE instead of FROM_DEVICE. This causes data corruption on non cache-coherent systems if frmrs are used. Signed-off-by: Steve Wise Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c index 629a28764da9..42a6f9f20285 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c +++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c @@ -265,7 +265,7 @@ static int fast_reg_read_chunks(struct svcxprt_rdma *xprt, frmr->page_list->page_list[page_no] = ib_dma_map_single(xprt->sc_cm_id->device, page_address(rqstp->rq_arg.pages[page_no]), - PAGE_SIZE, DMA_TO_DEVICE); + PAGE_SIZE, DMA_FROM_DEVICE); if (ib_dma_mapping_error(xprt->sc_cm_id->device, frmr->page_list->page_list[page_no])) goto fatal_err; From 51e95bed6263f6a2e558ca04fc4ff877f3b0cca3 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 24 Apr 2009 16:26:25 -0700 Subject: [PATCH 011/670] slub: add Documentation/ABI/testing/sysfs-kernel-slab Adds documentation for the slub ABI. This is placed in the `testing' directory since the meanings of these files are still subject to change as slub is developed. Acked-by: Christoph Lameter Cc: Randy Dunlap Signed-off-by: David Rientjes Signed-off-by: Pekka Enberg --- Documentation/ABI/testing/sysfs-kernel-slab | 479 ++++++++++++++++++++ 1 file changed, 479 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-kernel-slab diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab new file mode 100644 index 000000000000..6dcf75e594fb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-slab @@ -0,0 +1,479 @@ +What: /sys/kernel/slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The /sys/kernel/slab directory contains a snapshot of the + internal state of the SLUB allocator for each cache. Certain + files may be modified to change the behavior of the cache (and + any cache it aliases, if any). +Users: kernel memory tuning tools + +What: /sys/kernel/slab/cache/aliases +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The aliases file is read-only and specifies how many caches + have merged into this cache. + +What: /sys/kernel/slab/cache/align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The align file is read-only and specifies the cache's object + alignment in bytes. + +What: /sys/kernel/slab/cache/alloc_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_calls file is read-only and lists the kernel code + locations from which allocations for this cache were performed. + The alloc_calls file only contains information if debugging is + enabled for that cache (see Documentation/vm/slub.txt). + +What: /sys/kernel/slab/cache/alloc_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_fastpath file is read-only and specifies how many + objects have been allocated using the fast path. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_from_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_from_partial file is read-only and specifies how + many times a cpu slab has been full and it has been refilled + by using a slab from the list of partially used slabs. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_refill +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_refill file is read-only and specifies how many + times the per-cpu freelist was empty but there were objects + available as the result of remote cpu frees. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_slab file is read-only and specifies how many times + a new slab had to be allocated from the page allocator. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_slowpath file is read-only and specifies how many + objects have been allocated using the slow path because of a + refill or allocation from a partial or new slab. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/cache_dma +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The cache_dma file is read-only and specifies whether objects + are from ZONE_DMA. + Available when CONFIG_ZONE_DMA is enabled. + +What: /sys/kernel/slab/cache/cpu_slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The cpu_slabs file is read-only and displays how many cpu slabs + are active and their NUMA locality. + +What: /sys/kernel/slab/cache/cpuslab_flush +Date: April 2009 +KernelVersion: 2.6.31 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file cpuslab_flush is read-only and specifies how many + times a cache's cpu slabs have been flushed as the result of + destroying or shrinking a cache, a cpu going offline, or as + the result of forcing an allocation from a certain node. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/ctor +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The ctor file is read-only and specifies the cache's object + constructor function, which is invoked for each object when a + new slab is allocated. + +What: /sys/kernel/slab/cache/deactivate_empty +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_empty is read-only and specifies how many + times an empty cpu slab was deactivated. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_full +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_full is read-only and specifies how many + times a full cpu slab was deactivated. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_remote_frees +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_remote_frees is read-only and specifies how + many times a cpu slab has been deactivated and contained free + objects that were freed remotely. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_to_head +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_to_head is read-only and specifies how + many times a partial cpu slab was deactivated and added to the + head of its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_to_tail +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_to_tail is read-only and specifies how + many times a partial cpu slab was deactivated and added to the + tail of its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/destroy_by_rcu +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The destroy_by_rcu file is read-only and specifies whether + slabs (not objects) are freed by rcu. + +What: /sys/kernel/slab/cache/free_add_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file free_add_partial is read-only and specifies how many + times an object has been freed in a full slab so that it had to + added to its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_calls file is read-only and lists the locations of + object frees if slab debugging is enabled (see + Documentation/vm/slub.txt). + +What: /sys/kernel/slab/cache/free_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_fastpath file is read-only and specifies how many + objects have been freed using the fast path because it was an + object from the cpu slab. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_frozen +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_frozen file is read-only and specifies how many + objects have been freed to a frozen slab (i.e. a remote cpu + slab). + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_remove_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file free_remove_partial is read-only and specifies how + many times an object has been freed to a now-empty slab so + that it had to be removed from its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_slab file is read-only and specifies how many times an + empty slab has been freed back to the page allocator. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_slowpath file is read-only and specifies how many + objects have been freed using the slow path (i.e. to a full or + partial slab). + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/hwcache_align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The hwcache_align file is read-only and specifies whether + objects are aligned on cachelines. + +What: /sys/kernel/slab/cache/min_partial +Date: February 2009 +KernelVersion: 2.6.30 +Contact: Pekka Enberg , + David Rientjes +Description: + The min_partial file specifies how many empty slabs shall + remain on a node's partial list to avoid the overhead of + allocating new slabs. Such slabs may be reclaimed by utilizing + the shrink file. + +What: /sys/kernel/slab/cache/object_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The object_size file is read-only and specifies the cache's + object size. + +What: /sys/kernel/slab/cache/objects +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The objects file is read-only and displays how many objects are + active and from which nodes they are from. + +What: /sys/kernel/slab/cache/objects_partial +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The objects_partial file is read-only and displays how many + objects are on partial slabs and from which nodes they are + from. + +What: /sys/kernel/slab/cache/objs_per_slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file objs_per_slab is read-only and specifies how many + objects may be allocated from a single slab of the order + specified in /sys/kernel/slab/cache/order. + +What: /sys/kernel/slab/cache/order +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The order file specifies the page order at which new slabs are + allocated. It is writable and can be changed to increase the + number of objects per slab. If a slab cannot be allocated + because of fragmentation, SLUB will retry with the minimum order + possible depending on its characteristics. + +What: /sys/kernel/slab/cache/order_fallback +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file order_fallback is read-only and specifies how many + times an allocation of a new slab has not been possible at the + cache's order and instead fallen back to its minimum possible + order. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/partial +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The partial file is read-only and displays how long many + partial slabs there are and how long each node's list is. + +What: /sys/kernel/slab/cache/poison +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The poison file specifies whether objects should be poisoned + when a new slab is allocated. + +What: /sys/kernel/slab/cache/reclaim_account +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The reclaim_account file specifies whether the cache's objects + are reclaimable (and grouped by their mobility). + +What: /sys/kernel/slab/cache/red_zone +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The red_zone file specifies whether the cache's objects are red + zoned. + +What: /sys/kernel/slab/cache/remote_node_defrag_ratio +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file remote_node_defrag_ratio specifies the percentage of + times SLUB will attempt to refill the cpu slab with a partial + slab from a remote node as opposed to allocating a new slab on + the local node. This reduces the amount of wasted memory over + the entire system but can be expensive. + Available when CONFIG_NUMA is enabled. + +What: /sys/kernel/slab/cache/sanity_checks +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The sanity_checks file specifies whether expensive checks + should be performed on free and, at minimum, enables double free + checks. Caches that enable sanity_checks cannot be merged with + caches that do not. + +What: /sys/kernel/slab/cache/shrink +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The shrink file is written when memory should be reclaimed from + a cache. Empty partial slabs are freed and the partial list is + sorted so the slabs with the fewest available objects are used + first. + +What: /sys/kernel/slab/cache/slab_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The slab_size file is read-only and specifies the object size + with metadata (debugging information and alignment) in bytes. + +What: /sys/kernel/slab/cache/slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The slabs file is read-only and displays how long many slabs + there are (both cpu and partial) and from which nodes they are + from. + +What: /sys/kernel/slab/cache/store_user +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The store_user file specifies whether the location of + allocation or free should be tracked for a cache. + +What: /sys/kernel/slab/cache/total_objects +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The total_objects file is read-only and displays how many total + objects a cache has and from which nodes they are from. + +What: /sys/kernel/slab/cache/trace +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The trace file specifies whether object allocations and frees + should be traced. + +What: /sys/kernel/slab/cache/validate +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + Writing to the validate file causes SLUB to traverse all of its + cache's objects and check the validity of metadata. From fd9db7297749c05fcf5721ce5393a5a8b8772f2a Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 28 Apr 2009 16:56:35 +0200 Subject: [PATCH 012/670] fuse: destroy bdi on error Destroy bdi on error in fuse_fill_super(). This was an omission from commit 26c3679101dbccc054dcf370143941844ba70531 "fuse: destroy bdi on umount", which moved the bdi_destroy() call from fuse_conn_put() to fuse_put_super(). Signed-off-by: Miklos Szeredi CC: stable@kernel.org --- fs/fuse/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 459b73dd45e1..75ca5ac603ae 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -908,6 +908,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) err_put_root: dput(root_dentry); err_put_conn: + bdi_destroy(&fc->bdi); fuse_conn_put(fc); err_fput: fput(file); From 6d3d4be40357e3ea43b5c8837dec01d8f6cd1c67 Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 28 Apr 2009 16:42:39 +0200 Subject: [PATCH 013/670] CRIS: Wire up syscalls signalfd4 to writev. Adds sys_signalfd4, sys_eventfd2, sys_epoll_create1, sys_dup3, sys_pipe2, sys_inotify_init1, sys_preadv, sys_pwritev for both CRISv10 and CRISv32. --- arch/cris/arch-v10/kernel/entry.S | 14 +++++++++++--- arch/cris/arch-v32/kernel/entry.S | 8 ++++++++ arch/cris/include/asm/unistd.h | 12 ++++++++++-- 3 files changed, 29 insertions(+), 5 deletions(-) diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 72f5cd319b97..2c18d08cd913 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -536,10 +536,10 @@ multiple_interrupt: movem $r13, [$sp] push $r10 ; push orig_r10 clear.d [$sp=$sp-4] ; frametype == 0, normal frame - + move.d $sp, $r10 jsr do_multiple_IRQ - + jump ret_from_intr do_sigtrap: @@ -585,7 +585,7 @@ _ugdb_handle_breakpoint: pop $r0 ; Restore r0. ba do_sigtrap ; SIGTRAP the offending process. pop $dccr ; Restore dccr in delay slot. - + .global kernel_execve kernel_execve: move.d __NR_execve, $r9 @@ -929,6 +929,14 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 5e674c8f7c51..435b9671bd4b 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -852,6 +852,14 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h index 235d076379d5..c17079388bb9 100644 --- a/arch/cris/include/asm/unistd.h +++ b/arch/cris/include/asm/unistd.h @@ -281,7 +281,7 @@ #define __NR_mbind 274 #define __NR_get_mempolicy 275 #define __NR_set_mempolicy 276 -#define __NR_mq_open 277 +#define __NR_mq_open 277 #define __NR_mq_unlink (__NR_mq_open+1) #define __NR_mq_timedsend (__NR_mq_open+2) #define __NR_mq_timedreceive (__NR_mq_open+3) @@ -331,10 +331,18 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 +#define __NR_preadv 333 +#define __NR_pwritev 334 #ifdef __KERNEL__ -#define NR_syscalls 327 +#define NR_syscalls 335 #include From 999fb23ef868719b8bd55ee3f6b1f7a8fd8016af Mon Sep 17 00:00:00 2001 From: Jesper Nilsson Date: Tue, 28 Apr 2009 19:08:10 +0200 Subject: [PATCH 014/670] CRISv32: Fix typo compile error in ARTPEC-3 gpio driver. arch/cris/arch-v32/drivers/mach-a3/gpio.c: +spin_lock_irqrestore(&gpio_lock, flags); arch/cris/arch-v32/drivers/mach-a3/gpio.c: +spin_lock_irqrestore(&gpio_lock, flags); should that not be "spin_unlock_irqrestore()"? The code in question was inside an (most often) undefined ifdef. Reported-by: "Robert P. J. Day" Signed-off-by: Jesper Nilsson --- arch/cris/arch-v32/drivers/mach-a3/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c index 7a87bc0ae2e8..97357cfd17bb 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, shadow |= ~readl(dir_oe[priv->minor]) | (arg & changeable_bits[priv->minor]); i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_lock_irqrestore(&gpio_lock, flags); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_CLRBITS: spin_lock_irqsave(&gpio_lock, flags); @@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, shadow |= ~readl(dir_oe[priv->minor]) & ~(arg & changeable_bits[priv->minor]); i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); - spin_lock_irqrestore(&gpio_lock, flags); + spin_unlock_irqrestore(&gpio_lock, flags); break; case IO_HIGHALARM: /* Set alarm when bits with 1 in arg go high. */ From ec6995ddaa3db2c5f028184ed9b74c0c448c4947 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Wed, 29 Apr 2009 15:15:59 -0700 Subject: [PATCH 015/670] RDMA/cxgb3: Don't complete flushed send work requests twice When the SQ is flushed, mark the flushed entries as not signaled so the poll logic doesn't re-insert the CQ entry thinking its an out of order completion. The bug can cause the NFS/RDMA server to crash due to processing the same completed work request twice. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index 8d71086f5a1c..62f9cf2f94ec 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -410,6 +410,7 @@ int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count) ptr = wq->sq_rptr + count; sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); while (ptr != wq->sq_wptr) { + sqp->signaled = 0; insert_sq_cqe(wq, cq, sqp); ptr++; sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2); From 049ef7e40fc9959db480b2753a1dbe734d98e948 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 30 Apr 2009 14:43:43 -0700 Subject: [PATCH 016/670] drm/i915: x86 always has writeq. Add I915_READ64 for symmetry. i386 has inline code for writeq and readq, so just use those instead of ugly macros which evaluate arguments multiple times. Signed-off-by: Keith Packard Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 25065923b8a8..df08eb4240b6 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -705,13 +705,8 @@ extern void intel_modeset_cleanup(struct drm_device *dev); #define I915_WRITE16(reg, val) writel(val, dev_priv->regs + (reg)) #define I915_READ8(reg) readb(dev_priv->regs + (reg)) #define I915_WRITE8(reg, val) writeb(val, dev_priv->regs + (reg)) -#ifdef writeq #define I915_WRITE64(reg, val) writeq(val, dev_priv->regs + (reg)) -#else -#define I915_WRITE64(reg, val) (writel(val, dev_priv->regs + (reg)), \ - writel(upper_32_bits(val), dev_priv->regs + \ - (reg) + 4)) -#endif +#define I915_READ64(reg) readq(dev_priv->regs + (reg)) #define POSTING_READ(reg) (void)I915_READ(reg) #define I915_VERBOSE 0 From 79f11c19a396e8cea7dad322dcfb46c0a8517fe6 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 30 Apr 2009 14:43:44 -0700 Subject: [PATCH 017/670] drm/i915: save/restore fence registers across suspend/resume This makes software fallbacks not do tiling wrong on i965 and later after resume. It also should fix 945 performance reduction after resume which would have disabled tiling without causing any visible effect. Signed-off-by: Keith Packard [anholt: Fixed up the 915 case to not save/restore the new regs] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_suspend.c | 24 ++++++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index df08eb4240b6..b47af07f3918 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -283,6 +283,7 @@ typedef struct drm_i915_private { u8 saveAR[21]; u8 saveDACMASK; u8 saveCR[37]; + uint64_t saveFENCE[16]; struct { struct drm_mm gtt_space; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index d669cc2b42c0..ce8a21344a71 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -349,6 +349,18 @@ int i915_save_state(struct drm_device *dev) for (i = 0; i < 3; i++) dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2)); + /* Fences */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8)); + } else { + for (i = 0; i < 8; i++) + dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4)); + + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4)); + } i915_save_vga(dev); return 0; @@ -371,6 +383,18 @@ int i915_restore_state(struct drm_device *dev) /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); + /* Fences */ + if (IS_I965G(dev)) { + for (i = 0; i < 16; i++) + I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]); + } else { + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]); + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) + for (i = 0; i < 8; i++) + I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]); + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { From 21515e46bc6a6279dd13f6c01898ada9720100a3 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Wed, 29 Apr 2009 14:14:00 -0500 Subject: [PATCH 018/670] svcrdma: clean up error paths. These fixes resolved crashes due to resource leak BUG_ON checks. The resource leaks were detected by introducing asynchronous transport errors. Signed-off-by: Steve Wise Signed-off-by: Tom Tucker Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_sendto.c | 3 +++ net/sunrpc/xprtrdma/svc_rdma_transport.c | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c index 6c26a675435a..8b510c5e8777 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c +++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c @@ -183,6 +183,7 @@ static int fast_reg_xdr(struct svcxprt_rdma *xprt, fatal_err: printk("svcrdma: Error fast registering memory for xprt %p\n", xprt); + vec->frmr = NULL; svc_rdma_put_frmr(xprt, frmr); return -EIO; } @@ -516,6 +517,7 @@ static int send_reply(struct svcxprt_rdma *rdma, "svcrdma: could not post a receive buffer, err=%d." "Closing transport %p.\n", ret, rdma); set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags); + svc_rdma_put_frmr(rdma, vec->frmr); svc_rdma_put_context(ctxt, 0); return -ENOTCONN; } @@ -606,6 +608,7 @@ static int send_reply(struct svcxprt_rdma *rdma, return 0; err: + svc_rdma_unmap_dma(ctxt); svc_rdma_put_frmr(rdma, vec->frmr); svc_rdma_put_context(ctxt, 1); return -EIO; diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c index 3d810e7df3fb..4b0c2fa15e0b 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c @@ -520,8 +520,9 @@ int svc_rdma_post_recv(struct svcxprt_rdma *xprt) svc_xprt_get(&xprt->sc_xprt); ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr); if (ret) { - svc_xprt_put(&xprt->sc_xprt); + svc_rdma_unmap_dma(ctxt); svc_rdma_put_context(ctxt, 1); + svc_xprt_put(&xprt->sc_xprt); } return ret; From ccecee1e5e42981f5eb37f4411e8552b9db04d30 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Fri, 1 May 2009 11:33:53 -0400 Subject: [PATCH 019/670] nfsd41: slots are freed with session The session and slots are allocated all in one piece. Signed-off-by: Andy Adamson Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index c65a27b76a9d..3b711f5147a7 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -580,7 +580,6 @@ free_session(struct kref *kref) struct nfsd4_cache_entry *e = &ses->se_slots[i].sl_cache_entry; nfsd4_release_respages(e->ce_respages, e->ce_resused); } - kfree(ses->se_slots); kfree(ses); } From d10db3a07e38bfb1bff92c790072d85b0bcc07eb Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 23 Apr 2009 16:27:39 +0200 Subject: [PATCH 020/670] i2c-pxa.c: timeouts off by 1 With `while (timeout--)' timeout reaches -1 after the loop, so the tests below are off by one. Signed-off-by: Roel Kluin Acked-by: Wolfram Sang Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-pxa.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index c1405c8f6ba5..acc7143d9655 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -265,10 +265,10 @@ static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) show_state(i2c); } - if (timeout <= 0) + if (timeout < 0) show_state(i2c); - return timeout <= 0 ? I2C_RETRY : 0; + return timeout < 0 ? I2C_RETRY : 0; } static int i2c_pxa_wait_master(struct pxa_i2c *i2c) @@ -612,7 +612,7 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) show_state(i2c); } - if (timeout <= 0) { + if (timeout < 0) { show_state(i2c); dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); From 3ee59f8d0dcab2e114546038b2b224776c82b7f7 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 30 Apr 2009 09:58:50 +0200 Subject: [PATCH 021/670] iwlwifi: remove EXPORT_SYMBOL for static symbol It does not make sense to apply EXPORT_SYMBOL to a static symbol. Fixes this build error: drivers/net/wireless/iwlwifi/iwl3945-base.c:1697: error: __ksymtab_iwl3945_rx_queue_reset causes a section type conflict Signed-off-by: Andreas Schwab Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 70a00c8ee42e..4cce66133500 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1744,7 +1744,6 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx rxq->bd = NULL; rxq->rb_stts = NULL; } -EXPORT_SYMBOL(iwl3945_rx_queue_free); /* Convert linear signal-to-noise ratio into dB */ From 8ccd8f21122dcc30a665516d43aa8b4aa8ae51f6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 29 Apr 2009 23:35:56 +0200 Subject: [PATCH 022/670] mac80211: correct fragmentation threshold check The fragmentation threshold is defined to be including the FCS, and the code that sets the TX_FRAGMENTED flag correctly accounts for those four bytes. The code that verifies this doesn't though, which could lead to spurious warnings and frames being dropped although everything is ok. Correct the code by accounting for the FCS. (JWL -- The problem is described here: http://article.gmane.org/gmane.linux.kernel.wireless.general/32205 ) Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 3fb04a86444d..63656266d567 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -772,7 +772,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) hdrlen = ieee80211_hdrlen(hdr->frame_control); /* internal error, why is TX_FRAGMENTED set? */ - if (WARN_ON(skb->len <= frag_threshold)) + if (WARN_ON(skb->len + FCS_LEN <= frag_threshold)) return TX_DROP; /* From c0f0aac05fa84b37ed46db8cf6c8bee9a67bbcca Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 30 Apr 2009 20:09:56 +0200 Subject: [PATCH 023/670] cfg80211: fix truncated IEs Another bug in the "cfg80211: do not replace BSS structs" patch, a forgotten length update leads to bogus data being stored and passed to userspace, often truncated. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 2ae65b39b529..1f260c40b6ca 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -395,6 +395,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, memcpy(ies, res->pub.information_elements, ielen); found->ies_allocated = true; found->pub.information_elements = ies; + found->pub.len_information_elements = ielen; } } } From 299f5462087f3bc2141e6bc83ba7e2b15d8a07d2 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 30 Apr 2009 13:56:31 -0700 Subject: [PATCH 024/670] iwlwifi: update key flags at time key is set We need to be symmetrical in what is done when key is set and cleared. This is important wrt the key flags as they are used during key clearing and if they are not set when the key is set the key cannot be cleared completely. This addresses the many occurences of the WARN found in iwl_set_tkip_dynamic_key_info() and tracked in http://www.kerneloops.org/searchweek.php?search=iwl_set_dynamic_key If calling iwl_set_tkip_dynamic_key_info()/iwl_remove_dynamic_key() pair a few times in a row will cause that we run out of key space. This is because the index stored in the key flags is used by iwl_remove_dynamic_key() to decide if it should remove the key. Unfortunately the key flags, and hence the key index is currently only set at the time the key is written to the device (in iwl_update_tkip_key()) and _not_ in iwl_set_tkip_dynamic_key_info(). Fix this by setting flags in iwl_set_tkip_dynamic_key_info(). Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-sta.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 5798fe49c771..44ab03a12e40 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -719,6 +719,14 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; int ret = 0; + __le16 key_flags = 0; + + key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == priv->hw_params.bcast_sta_id) + key_flags |= STA_KEY_MULTICAST_MSK; keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; @@ -738,6 +746,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, "no space for a new key"); + priv->stations[sta_id].sta.key.key_flags = key_flags; + + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -754,9 +765,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv, { u8 sta_id = IWL_INVALID_STATION; unsigned long flags; - __le16 key_flags = 0; int i; - DECLARE_MAC_BUF(mac); sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { @@ -771,16 +780,8 @@ void iwl_update_tkip_key(struct iwl_priv *priv, return; } - key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == priv->hw_params.bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; for (i = 0; i < 5; i++) From ac46d48e00349c63650b3cc6f9460fcc183da6a6 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 1 May 2009 18:44:50 -0400 Subject: [PATCH 025/670] cfg80211: fix race condition with wiphy_apply_custom_regulatory() We forgot to lock using the cfg80211_mutex in wiphy_apply_custom_regulatory(). Without the lock there is possible race between processing a reply from CRDA and a driver calling wiphy_apply_custom_regulatory(). During the processing of the reply from CRDA we free last_request and wiphy_apply_custom_regulatory() eventually accesses an element from last_request in the through freq_reg_info_regd(). This is very difficult to reproduce (I haven't), it takes us 3 hours and you need to be banging hard, but the race is obvious by looking at the code. This should only affect those who use this caller, which currently is ath5k, ath9k, and ar9170. EIP: 0060:[] EFLAGS: 00210282 CPU: 1 EIP is at freq_reg_info_regd+0x24/0x121 [cfg80211] EAX: 00000000 EBX: f7ca0060 ECX: f5183d94 EDX: 0024cde0 ESI: f8f56edc EDI: 00000000 EBP: 00000000 ESP: f5183d44 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 14617, ti=f5182000 task=f3934d10 task.ti=f5182000) Stack: c0505300 f7ca0ab4 f5183d94 0024cde0 f8f403a6 f8f63160 f7ca0060 00000000 00000000 f8ebedf8 f5183d90 f8f56edc 00000000 00000004 00000f40 f8f56edc f7ca0060 f7ca1234 00000000 00000000 00000000 f7ca14f0 f7ca0ab4 f7ca1289 Call Trace: [] wiphy_apply_custom_regulatory+0x8f/0x122 [cfg80211] [] ath_attach+0x707/0x9e6 [ath9k] [] ath_pci_probe+0x18d/0x29a [ath9k] [] pci_device_probe+0xa3/0xe4 [] really_probe+0xd7/0x1de [] __driver_attach+0x37/0x55 [] bus_for_each_dev+0x31/0x57 [] driver_attach+0x16/0x18 [] bus_add_driver+0xec/0x21b [] driver_register+0x85/0xe2 [] __pci_register_driver+0x3c/0x69 [] ath9k_init+0x43/0x68 [ath9k] [] _stext+0x3b/0x116 [] sys_init_module+0x8a/0x19e [] sysenter_do_call+0x12/0x21 [] 0xffffe430 ======================= Code: 0f 94 c0 c3 31 c0 c3 55 57 56 53 89 c3 83 ec 14 8b 74 24 2c 89 54 24 0c 89 4c 24 08 85 f6 75 06 8b 35 c8 bb ec f8 a1 cc bb ec f8 <8b> 40 04 83 f8 03 74 3a 48 74 37 8b 43 28 85 c0 74 30 89 c6 8b EIP: [] freq_reg_info_regd+0x24/0x121 [cfg80211] SS:ESP 0068:f5183d44 Cc: stable@kernel.org Reported-by: Nataraj Sadasivam Reported-by: Vivek Natarajan Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 6c1993d99902..3a734949769d 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -907,6 +907,7 @@ EXPORT_SYMBOL(freq_reg_info); int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, const struct ieee80211_reg_rule **reg_rule) { + assert_cfg80211_lock(); return freq_reg_info_regd(wiphy, center_freq, bandwidth, reg_rule, NULL); } @@ -1176,6 +1177,8 @@ static void handle_channel_custom(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *chan; + assert_cfg80211_lock(); + sband = wiphy->bands[band]; BUG_ON(chan_idx >= sband->n_channels); chan = &sband->channels[chan_idx]; @@ -1214,10 +1217,13 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, const struct ieee80211_regdomain *regd) { enum ieee80211_band band; + + mutex_lock(&cfg80211_mutex); for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (wiphy->bands[band]) handle_band_custom(wiphy, band, regd); } + mutex_unlock(&cfg80211_mutex); } EXPORT_SYMBOL(wiphy_apply_custom_regulatory); From b1ed8ddd21a2d7acf8efbb60a112ea5c9f914159 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Sat, 2 May 2009 00:34:15 -0400 Subject: [PATCH 026/670] cfg80211: fix bug while trying to process beacon hints on init During initialization we would not have received any beacons so skip processing reg beacon hints, also adds a check to reg_is_world_roaming() for last_request before accessing its fields. This should fix this: BUG: unable to handle kernel NULL pointer dereference at IP: [] wiphy_update_regulatory+0x20f/0x295 *pdpt = 0000000008bf1001 *pde = 0000000000000000 Oops: 0000 [#1] last sysfs file: /sys/class/backlight/eeepc/brightness Modules linked in: ath5k(+) mac80211 led_class cfg80211 go_bit cfbcopyarea cfbimgblt cfbfillrect ipv6 ydev usual_tables(P) snd_hda_codec_realtek snd_hda_intel nd_hwdep uhci_hcd snd_pcm_oss snd_mixer_oss i2c_i801 e serio_raw i2c_core pcspkr atl2 snd_pcm intel_agp re agpgart eeepc_laptop snd_page_alloc ac video backlight rfkill button processor evdev thermal fan ata_generic Pid: 2909, comm: modprobe Tainted: Pc #112) 701 EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at wiphy_update_regulatory+0x20f/0x295 [cfg80211] EAX: 00000000 EBX: c5da0000 ECX: 00000000 EDX: c5da0060 ESI: 0000001a EDI: c5da0060 EBP: df3bdd70 ESP: df3bdd40 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process modprobe (pid: 2909, ti=df3bc000 task=c5d030000) Stack: df3bdd90 c5da0060 c04277e0 00000001 00000044 c04277e402 00000002 c5da0000 0000001a c5da0060 df3bdda8 e01706a2 02 00000282 000080d0 00000068 c5d53500 00000080 0000028240 Call Trace: [] ? wiphy_register+0x122/0x1b7 [cfg80211] [] ? ieee80211_register_hw+0xd8/0x346 [] ? ath5k_hw_set_bssid_mask+0x71/0x78 [ath5k] [] ? ath5k_pci_probe+0xa5c/0xd0a [ath5k] [] ? sysfs_find_dirent+0x16/0x27 [] ? local_pci_probe+0xe/0x10 [] ? pci_device_probe+0x48/0x66 [] ? driver_probe_device+0x7f/0xf2 [] ? __driver_attach+0x43/0x5f [] ? bus_for_each_dev+0x39/0x5a [] ? driver_attach+0x14/0x16 [] ? __driver_attach+0x0/0x5f [] ? bus_add_driver+0xd7/0x1e7 [] ? driver_register+0x7b/0xd7 [] ? __pci_register_driver+0x32/0x85 [] ? init_ath5k_pci+0x18/0x30 [ath5k] [] ? _stext+0x49/0x10b [] ? init_ath5k_pci+0x0/0x30 [ath5k] [] ? __blocking_notifier_call_chain+0x40/0x4c [] ? sys_init_module+0x87/0x18b [] ? sysenter_do_call+0x12/0x22 Code: b8 da 17 e0 83 c0 04 e8 92 f9 ff ff 84 c0 75 2a 8b 85 c0 74 0c 83 c0 04 e8 7c f9 ff ff 84 c0 75 14 a1 bc da 4 03 74 66 8b 4d d4 80 79 08 00 74 5d a1 e0 d2 17 e0 48 EIP: [] wiphy_update_regulatory+0x20f/0x295 SP 0068:df3bdd40 CR2: 0000000000000004 ---[ end trace 830f2dd2a95fd1a8 ]--- This issue is hard to reproduce, but it was noticed and discussed on this thread: http://marc.info/?t=123938022700005&r=1&w=2 Cc: stable@kernel.org Reported-by: Alan Jenkins Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 3a734949769d..974b127aea66 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1134,7 +1134,8 @@ static bool reg_is_world_roaming(struct wiphy *wiphy) if (is_world_regdom(cfg80211_regdomain->alpha2) || (wiphy->regd && is_world_regdom(wiphy->regd->alpha2))) return true; - if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + if (last_request && + last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && wiphy->custom_regulatory) return true; return false; @@ -1143,6 +1144,12 @@ static bool reg_is_world_roaming(struct wiphy *wiphy) /* Reap the advantages of previously found beacons */ static void reg_process_beacons(struct wiphy *wiphy) { + /* + * Means we are just firing up cfg80211, so no beacons would + * have been processed yet. + */ + if (!last_request) + return; if (!reg_is_world_roaming(wiphy)) return; wiphy_update_beacon_reg(wiphy); From 30a548c727514484b08ac06edf0a7eb0f7fd70bf Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Sat, 2 May 2009 01:17:27 -0400 Subject: [PATCH 027/670] cfg80211: fix comment on regulatory hint processing Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 974b127aea66..08265ca15785 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1436,7 +1436,7 @@ new_request: return call_crda(last_request->alpha2); } -/* This currently only processes user and driver regulatory hints */ +/* This processes *all* regulatory hints */ static void reg_process_hint(struct regulatory_request *reg_request) { int r = 0; From 8e532175277d9a5eae49768ed086555081f741a7 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 4 May 2009 18:04:55 +0200 Subject: [PATCH 028/670] mac80211: minstrel, fix memory corruption minstrel doesn't count max rate count in fact, since it doesn't use a loop variable `i' and hence allocs space only for bitrates found in the first band. Fix it by involving the `i' as an index so that it traverses all the bands now and finds the real max bitrate count. Signed-off-by: Jiri Slaby Cc: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/rc80211_minstrel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 3824990d340b..70df3dcc3cf6 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -476,7 +476,7 @@ minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) return NULL; for (i = 0; i < IEEE80211_NUM_BANDS; i++) { - sband = hw->wiphy->bands[hw->conf.channel->band]; + sband = hw->wiphy->bands[i]; if (sband->n_bitrates > max_rates) max_rates = sband->n_bitrates; } From 6909268dc93ae4b0b8e1ebb4b2fa70b1a47dd347 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 4 May 2009 18:10:28 +0200 Subject: [PATCH 029/670] mac80211: pid, fix memory corruption pid doesn't count with some band having more bitrates than the one associated the first time. Fix that by counting the maximal available bitrate count and allocate big enough space. Secondly, fix touching uninitialized memory which causes panics. Index sucked from this random memory points to the hell. The fix is to sort the rates on each band change. Signed-off-by: Jiri Slaby Signed-off-by: John W. Linville --- net/mac80211/rc80211_pid_algo.c | 93 +++++++++++++++++---------------- 1 file changed, 49 insertions(+), 44 deletions(-) diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index b16801cde06f..01d59a8e334c 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -317,57 +317,17 @@ rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta) { struct rc_pid_sta_info *spinfo = priv_sta; + struct rc_pid_info *pinfo = priv; + struct rc_pid_rateinfo *rinfo = pinfo->rinfo; struct sta_info *si; + int i, j, tmp; + bool s; /* TODO: This routine should consider using RSSI from previous packets * as we need to have IEEE 802.1X auth succeed immediately after assoc.. * Until that method is implemented, we will use the lowest supported * rate as a workaround. */ - spinfo->txrate_idx = rate_lowest_index(sband, sta); - /* HACK */ - si = container_of(sta, struct sta_info, sta); - si->fail_avg = 0; -} - -static void *rate_control_pid_alloc(struct ieee80211_hw *hw, - struct dentry *debugfsdir) -{ - struct rc_pid_info *pinfo; - struct rc_pid_rateinfo *rinfo; - struct ieee80211_supported_band *sband; - int i, j, tmp; - bool s; -#ifdef CONFIG_MAC80211_DEBUGFS - struct rc_pid_debugfs_entries *de; -#endif - - sband = hw->wiphy->bands[hw->conf.channel->band]; - - pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC); - if (!pinfo) - return NULL; - - /* We can safely assume that sband won't change unless we get - * reinitialized. */ - rinfo = kmalloc(sizeof(*rinfo) * sband->n_bitrates, GFP_ATOMIC); - if (!rinfo) { - kfree(pinfo); - return NULL; - } - - pinfo->target = RC_PID_TARGET_PF; - pinfo->sampling_period = RC_PID_INTERVAL; - pinfo->coeff_p = RC_PID_COEFF_P; - pinfo->coeff_i = RC_PID_COEFF_I; - pinfo->coeff_d = RC_PID_COEFF_D; - pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT; - pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR; - pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION; - pinfo->norm_offset = RC_PID_NORM_OFFSET; - pinfo->rinfo = rinfo; - pinfo->oldrate = 0; - /* Sort the rates. This is optimized for the most common case (i.e. * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed * mapping too. */ @@ -395,6 +355,51 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw, break; } + spinfo->txrate_idx = rate_lowest_index(sband, sta); + /* HACK */ + si = container_of(sta, struct sta_info, sta); + si->fail_avg = 0; +} + +static void *rate_control_pid_alloc(struct ieee80211_hw *hw, + struct dentry *debugfsdir) +{ + struct rc_pid_info *pinfo; + struct rc_pid_rateinfo *rinfo; + struct ieee80211_supported_band *sband; + int i, max_rates = 0; +#ifdef CONFIG_MAC80211_DEBUGFS + struct rc_pid_debugfs_entries *de; +#endif + + pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC); + if (!pinfo) + return NULL; + + for (i = 0; i < IEEE80211_NUM_BANDS; i++) { + sband = hw->wiphy->bands[i]; + if (sband->n_bitrates > max_rates) + max_rates = sband->n_bitrates; + } + + rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC); + if (!rinfo) { + kfree(pinfo); + return NULL; + } + + pinfo->target = RC_PID_TARGET_PF; + pinfo->sampling_period = RC_PID_INTERVAL; + pinfo->coeff_p = RC_PID_COEFF_P; + pinfo->coeff_i = RC_PID_COEFF_I; + pinfo->coeff_d = RC_PID_COEFF_D; + pinfo->smoothing_shift = RC_PID_SMOOTHING_SHIFT; + pinfo->sharpen_factor = RC_PID_SHARPENING_FACTOR; + pinfo->sharpen_duration = RC_PID_SHARPENING_DURATION; + pinfo->norm_offset = RC_PID_NORM_OFFSET; + pinfo->rinfo = rinfo; + pinfo->oldrate = 0; + #ifdef CONFIG_MAC80211_DEBUGFS de = &pinfo->dentries; de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR, From 97a775c49c7e1b47b016a492463486a5b86da479 Mon Sep 17 00:00:00 2001 From: Jinyoung Park Date: Fri, 1 May 2009 12:54:31 +0100 Subject: [PATCH 030/670] ASoC: Fix errors in WM8990 The mis-typing exist in dapm controller definitions and dapm route definitions, so happen mis-matched error when snd_soc_dapm_add_routes(). Cc: stable@kernel.org Signed-off-by: Jinyoung Park Signed-off-by: Mark Brown Date: Tue, 5 May 2009 14:31:12 +0200 Subject: [PATCH 031/670] netfilter: add missing linux/types.h include to xt_LED.h Pointed out by Dave Miller: CHECK include/linux/netfilter (57 files) /home/davem/src/GIT/net-2.6/usr/include/linux/netfilter/xt_LED.h:6: found __[us]{8,16,32,64} type without #include Signed-off-by: Patrick McHardy --- include/linux/netfilter/xt_LED.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/netfilter/xt_LED.h b/include/linux/netfilter/xt_LED.h index 4c91a0d770d0..f5509e7524d3 100644 --- a/include/linux/netfilter/xt_LED.h +++ b/include/linux/netfilter/xt_LED.h @@ -1,6 +1,8 @@ #ifndef _XT_LED_H #define _XT_LED_H +#include + struct xt_led_info { char id[27]; /* Unique ID for this trigger in the LED class */ __u8 always_blink; /* Blink even if the LED is already on */ From b98b4947cb79d670fceca0e951c092eea93e9baa Mon Sep 17 00:00:00 2001 From: Christoph Paasch Date: Tue, 5 May 2009 15:32:16 +0200 Subject: [PATCH 032/670] netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONE As packets ending with NEXTHDR_NONE don't have a last extension header, the check for the length needs to be after the check for NEXTHDR_NONE. Signed-off-by: Christoph Paasch Signed-off-by: Patrick McHardy --- net/ipv6/netfilter/ip6t_ipv6header.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/netfilter/ip6t_ipv6header.c b/net/ipv6/netfilter/ip6t_ipv6header.c index 14e6724d5672..91490ad9302c 100644 --- a/net/ipv6/netfilter/ip6t_ipv6header.c +++ b/net/ipv6/netfilter/ip6t_ipv6header.c @@ -50,14 +50,14 @@ ipv6header_mt6(const struct sk_buff *skb, const struct xt_match_param *par) struct ipv6_opt_hdr _hdr; int hdrlen; - /* Is there enough space for the next ext header? */ - if (len < (int)sizeof(struct ipv6_opt_hdr)) - return false; /* No more exthdr -> evaluate */ if (nexthdr == NEXTHDR_NONE) { temp |= MASK_NONE; break; } + /* Is there enough space for the next ext header? */ + if (len < (int)sizeof(struct ipv6_opt_hdr)) + return false; /* ESP -> evaluate */ if (nexthdr == NEXTHDR_ESP) { temp |= MASK_ESP; From bd0185ceaca7ef17d5c9c094882a5aabe8eff677 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 5 May 2009 15:39:39 +0200 Subject: [PATCH 033/670] sound: serial-u16550: fix buffer overflow Remove most of the serial port parameters from the card longname string because it was way too long and overflowed into the mixername string. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/drivers/serial-u16550.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c index b2b6d50c9425..a25fb7b1f441 100644 --- a/sound/drivers/serial-u16550.c +++ b/sound/drivers/serial-u16550.c @@ -963,16 +963,11 @@ static int __devinit snd_serial_probe(struct platform_device *devptr) if (err < 0) goto _err; - sprintf(card->longname, "%s at 0x%lx, irq %d speed %d div %d outs %d ins %d adaptor %s droponfull %d", + sprintf(card->longname, "%s [%s] at %#lx, irq %d", card->shortname, - uart->base, - uart->irq, - uart->speed, - (int)uart->divisor, - outs[dev], - ins[dev], adaptor_names[uart->adaptor], - uart->drop_on_full); + uart->base, + uart->irq); snd_card_set_dev(card, &devptr->dev); From b452e08e73c0e3dbb0be82130217be4b7084299e Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 5 May 2009 15:40:12 +0200 Subject: [PATCH 034/670] sound: via82xx: fix DXS volume range With 5 bits and 1.5 dB per step, the DXS volume range is only 48 dB. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/via82xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 809b233dd4a3..1ef58c51c213 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -1687,7 +1687,7 @@ static int snd_via8233_pcmdxs_volume_put(struct snd_kcontrol *kcontrol, return change; } -static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -9450, 150, 1); +static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -4650, 150, 1); static struct snd_kcontrol_new snd_via8233_pcmdxs_volume_control __devinitdata = { .name = "PCM Playback Volume", From 280f37afa2c270ff029cb420b34396aa002909c3 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 5 May 2009 17:46:07 +0200 Subject: [PATCH 035/670] netfilter: xt_cluster: fix use of cluster match with 32 nodes This patch fixes a problem when you use 32 nodes in the cluster match: % iptables -I PREROUTING -t mangle -i eth0 -m cluster \ --cluster-total-nodes 32 --cluster-local-node 32 \ --cluster-hash-seed 0xdeadbeef -j MARK --set-mark 0xffff iptables: Invalid argument. Run `dmesg' for more information. % dmesg | tail -1 xt_cluster: this node mask cannot be higher than the total number of nodes The problem is related to this checking: if (info->node_mask >= (1 << info->total_nodes)) { printk(KERN_ERR "xt_cluster: this node mask cannot be " "higher than the total number of nodes\n"); return false; } (1 << 32) is 1. Thus, the checking fails. BTW, I said this before but I insist: I have only tested the cluster match with 2 nodes getting ~45% extra performance in an active-active setup. The maximum limit of 32 nodes is still completely arbitrary. I'd really appreciate if people that have more nodes in their setups let me know. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- include/linux/netfilter/xt_cluster.h | 2 ++ net/netfilter/xt_cluster.c | 8 +++++++- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/include/linux/netfilter/xt_cluster.h b/include/linux/netfilter/xt_cluster.h index 5e0a0d07b526..886682656f09 100644 --- a/include/linux/netfilter/xt_cluster.h +++ b/include/linux/netfilter/xt_cluster.h @@ -12,4 +12,6 @@ struct xt_cluster_match_info { u_int32_t flags; }; +#define XT_CLUSTER_NODES_MAX 32 + #endif /* _XT_CLUSTER_MATCH_H */ diff --git a/net/netfilter/xt_cluster.c b/net/netfilter/xt_cluster.c index 6c4847662b85..69a639f35403 100644 --- a/net/netfilter/xt_cluster.c +++ b/net/netfilter/xt_cluster.c @@ -135,7 +135,13 @@ static bool xt_cluster_mt_checkentry(const struct xt_mtchk_param *par) { struct xt_cluster_match_info *info = par->matchinfo; - if (info->node_mask >= (1 << info->total_nodes)) { + if (info->total_nodes > XT_CLUSTER_NODES_MAX) { + printk(KERN_ERR "xt_cluster: you have exceeded the maximum " + "number of cluster nodes (%u > %u)\n", + info->total_nodes, XT_CLUSTER_NODES_MAX); + return false; + } + if (info->node_mask >= (1ULL << info->total_nodes)) { printk(KERN_ERR "xt_cluster: this node mask cannot be " "higher than the total number of nodes\n"); return false; From fecc1133b66af6e0cd49115a248f34bbb01f180a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 5 May 2009 17:48:26 +0200 Subject: [PATCH 036/670] netfilter: ctnetlink: fix wrong message type in user updates This patch fixes the wrong message type that are triggered by user updates, the following commands: (term1)# conntrack -I -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state LISTEN (term1)# conntrack -U -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state SYN_SENT (term1)# conntrack -U -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state SYN_RECV only trigger event message of type NEW, when only the first is NEW while others should be UPDATE. (term2)# conntrack -E [NEW] tcp 6 10 LISTEN src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 [NEW] tcp 6 10 SYN_SENT src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 [NEW] tcp 6 10 SYN_RECV src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 This patch also removes IPCT_REFRESH from the bitmask since it is not of any use. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_netlink.c | 48 ++++++++++++---------------- 1 file changed, 20 insertions(+), 28 deletions(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 0ea36e0c8a0e..fd77619256a8 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -1186,28 +1186,6 @@ ctnetlink_change_conntrack(struct nf_conn *ct, struct nlattr *cda[]) return 0; } -static inline void -ctnetlink_event_report(struct nf_conn *ct, u32 pid, int report) -{ - unsigned int events = 0; - - if (test_bit(IPS_EXPECTED_BIT, &ct->status)) - events |= IPCT_RELATED; - else - events |= IPCT_NEW; - - nf_conntrack_event_report(IPCT_STATUS | - IPCT_HELPER | - IPCT_REFRESH | - IPCT_PROTOINFO | - IPCT_NATSEQADJ | - IPCT_MARK | - events, - ct, - pid, - report); -} - static struct nf_conn * ctnetlink_create_conntrack(struct nlattr *cda[], struct nf_conntrack_tuple *otuple, @@ -1373,6 +1351,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, err = -ENOENT; if (nlh->nlmsg_flags & NLM_F_CREATE) { struct nf_conn *ct; + enum ip_conntrack_events events; ct = ctnetlink_create_conntrack(cda, &otuple, &rtuple, u3); @@ -1383,9 +1362,18 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, err = 0; nf_conntrack_get(&ct->ct_general); spin_unlock_bh(&nf_conntrack_lock); - ctnetlink_event_report(ct, - NETLINK_CB(skb).pid, - nlmsg_report(nlh)); + if (test_bit(IPS_EXPECTED_BIT, &ct->status)) + events = IPCT_RELATED; + else + events = IPCT_NEW; + + nf_conntrack_event_report(IPCT_STATUS | + IPCT_HELPER | + IPCT_PROTOINFO | + IPCT_NATSEQADJ | + IPCT_MARK | events, + ct, NETLINK_CB(skb).pid, + nlmsg_report(nlh)); nf_ct_put(ct); } else spin_unlock_bh(&nf_conntrack_lock); @@ -1404,9 +1392,13 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb, if (err == 0) { nf_conntrack_get(&ct->ct_general); spin_unlock_bh(&nf_conntrack_lock); - ctnetlink_event_report(ct, - NETLINK_CB(skb).pid, - nlmsg_report(nlh)); + nf_conntrack_event_report(IPCT_STATUS | + IPCT_HELPER | + IPCT_PROTOINFO | + IPCT_NATSEQADJ | + IPCT_MARK, + ct, NETLINK_CB(skb).pid, + nlmsg_report(nlh)); nf_ct_put(ct); } else spin_unlock_bh(&nf_conntrack_lock); From ca50a51e890b0a62b44b5642c1ba5049909e5a8b Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Thu, 16 Apr 2009 05:54:12 +1000 Subject: [PATCH 037/670] ipu_idmac: Use disable_irq_nosync() from within irq handlers. disable_irq() should wait for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Note the 2 handlers in question are only used #ifdef DEBUG so I imagine these code paths don't get hit often. Signed-off-by: Ben Nizette Acked-by: Guennadi Liakhovetski Signed-off-by: Dan Williams --- drivers/dma/ipu/ipu_idmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index e202a6ce5573..3a4deea78a71 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1547,7 +1547,7 @@ static irqreturn_t ic_sof_irq(int irq, void *dev_id) struct idmac_channel *ichan = dev_id; printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n", irq, ichan->dma_chan.chan_id); - disable_irq(irq); + disable_irq_nosync(irq); return IRQ_HANDLED; } @@ -1556,7 +1556,7 @@ static irqreturn_t ic_eof_irq(int irq, void *dev_id) struct idmac_channel *ichan = dev_id; printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n", irq, ichan->dma_chan.chan_id); - disable_irq(irq); + disable_irq_nosync(irq); return IRQ_HANDLED; } From 029091df01116aff8dea89ce96a0a2534401803a Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Thu, 30 Apr 2009 14:48:29 +0800 Subject: [PATCH 038/670] PCI: Fix pci-e port driver slot_reset bad default return value When an upstream port reports an AER error to root port, kernel starts error recovery procedures. The default return value of function pcie_portdrv_slot_reset is PCI_ERS_RESULT_NONE. If all port service drivers of the downstream port under the upstream port have no slot_reset method in pci_error_handlers, AER recovery would stop without resume. Below patch against 2.6.30-rc3 fixes it. Signed-off-by: Zhang Yanmin Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aer/aerdrv.h | 3 +++ drivers/pci/pcie/portdrv_pci.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index c7ad68b6c6d6..aa14482a4779 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -95,6 +95,9 @@ struct aer_broadcast_data { static inline pci_ers_result_t merge_result(enum pci_ers_result orig, enum pci_ers_result new) { + if (new == PCI_ERS_RESULT_NONE) + return orig; + switch (orig) { case PCI_ERS_RESULT_CAN_RECOVER: case PCI_ERS_RESULT_RECOVERED: diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index b924e2463f85..091ce70051e0 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -200,7 +200,7 @@ static int slot_reset_iter(struct device *device, void *data) static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev) { - pci_ers_result_t status = PCI_ERS_RESULT_NONE; + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED; int retval; /* If fatal, restore cfg space for possible link reset at upstream */ From 457ca7bb6bdf39d0832d3f88c65fa367a3b20de6 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 5 May 2009 13:09:01 -0700 Subject: [PATCH 039/670] Bluetooth: Move dev_set_name() to a context that can sleep Setting the name of a sysfs device has to be done in a context that can actually sleep. It allocates its memory with GFP_KERNEL. Previously it was a static (size limited) string and that got changed to accommodate longer device names. So move the dev_set_name() just before calling device_add() which is executed in a work queue. This fixes the following error: [ 110.012125] BUG: sleeping function called from invalid context at mm/slub.c:1595 [ 110.012135] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper [ 110.012141] 2 locks held by swapper/0: [ 110.012145] #0: (hci_task_lock){++.-.+}, at: [] hci_rx_task+0x2f/0x2d0 [bluetooth] [ 110.012173] #1: (&hdev->lock){+.-.+.}, at: [] hci_event_packet+0x72/0x25c0 [bluetooth] [ 110.012198] Pid: 0, comm: swapper Tainted: G W 2.6.30-rc4-g953cdaa #1 [ 110.012203] Call Trace: [ 110.012207] [] __might_sleep+0x14d/0x170 [ 110.012228] [] __kmalloc+0x111/0x170 [ 110.012239] [] kvasprintf+0x64/0xb0 [ 110.012248] [] kobject_set_name_vargs+0x3b/0xa0 [ 110.012257] [] dev_set_name+0x76/0xa0 [ 110.012273] [] ? hci_event_packet+0x72/0x25c0 [bluetooth] [ 110.012289] [] hci_conn_add_sysfs+0x3d/0x70 [bluetooth] [ 110.012303] [] hci_event_packet+0xbc/0x25c0 [bluetooth] [ 110.012312] [] ? sock_def_readable+0x80/0xa0 [ 110.012328] [] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth] [ 110.012343] [] ? sock_def_readable+0x80/0xa0 [ 110.012347] [] ? _read_unlock+0x75/0x80 [ 110.012354] [] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth] [ 110.012360] [] hci_rx_task+0x203/0x2d0 [bluetooth] [ 110.012365] [] tasklet_action+0xb5/0x160 [ 110.012369] [] __do_softirq+0x9c/0x150 [ 110.012372] [] ? _spin_unlock+0x3f/0x80 [ 110.012376] [] call_softirq+0x1c/0x30 [ 110.012380] [] do_softirq+0x8d/0xe0 [ 110.012383] [] irq_exit+0xc5/0xe0 [ 110.012386] [] do_IRQ+0x9d/0x120 [ 110.012389] [] ret_from_intr+0x0/0xf [ 110.012391] [] ? acpi_idle_enter_bm+0x264/0x2a6 [ 110.012399] [] ? acpi_idle_enter_bm+0x25a/0x2a6 [ 110.012403] [] ? cpuidle_idle_call+0xc5/0x130 [ 110.012407] [] ? cpu_idle+0xc4/0x130 [ 110.012411] [] ? rest_init+0x88/0xb0 [ 110.012416] [] ? start_kernel+0x3b5/0x412 [ 110.012420] [] ? x86_64_start_reservations+0x91/0xb5 [ 110.012424] [] ? x86_64_start_kernel+0xef/0x11b Based on a report by Davide Pesavento Signed-off-by: Marcel Holtmann Tested-by: Hugo Mildenberger Tested-by: Bing Zhao --- net/bluetooth/hci_sysfs.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index 582d8877078c..a05d45eb3ba1 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -88,10 +88,13 @@ static struct device_type bt_link = { static void add_conn(struct work_struct *work) { struct hci_conn *conn = container_of(work, struct hci_conn, work_add); + struct hci_dev *hdev = conn->hdev; /* ensure previous del is complete */ flush_work(&conn->work_del); + dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); + if (device_add(&conn->dev) < 0) { BT_ERR("Failed to register connection device"); return; @@ -154,12 +157,8 @@ void hci_conn_init_sysfs(struct hci_conn *conn) void hci_conn_add_sysfs(struct hci_conn *conn) { - struct hci_dev *hdev = conn->hdev; - BT_DBG("conn %p", conn); - dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); - queue_work(bt_workq, &conn->work_add); } From 1eb5ac6466d4be7b15b38ce3ab709600f1bc891f Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Tue, 5 May 2009 19:13:44 +1000 Subject: [PATCH 040/670] mm: SLUB fix reclaim_state SLUB does not correctly account reclaim_state.reclaimed_slab, so it will break memory reclaim. Account it like SLAB does. Cc: stable@kernel.org Cc: linux-mm@kvack.org Cc: Matt Mackall Acked-by: Christoph Lameter Signed-off-by: Nick Piggin Signed-off-by: Pekka Enberg --- mm/slub.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/slub.c b/mm/slub.c index 7ab54ecbd3f3..aa34913a41ea 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -9,6 +9,7 @@ */ #include +#include /* struct reclaim_state */ #include #include #include @@ -1170,6 +1171,8 @@ static void __free_slab(struct kmem_cache *s, struct page *page) __ClearPageSlab(page); reset_page_mapcount(page); + if (current->reclaim_state) + current->reclaim_state->reclaimed_slab += pages; __free_pages(page, order); } From 1f0532eb617d28f65c93593a1491f662f14f7eac Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Tue, 5 May 2009 19:13:45 +1000 Subject: [PATCH 041/670] mm: SLOB fix reclaim_state SLOB does not correctly account reclaim_state.reclaimed_slab, so it will break memory reclaim. Account it like SLAB does. Cc: stable@kernel.org Cc: linux-mm@kvack.org Acked-by: Matt Mackall Acked-by: Christoph Lameter Signed-off-by: Nick Piggin Signed-off-by: Pekka Enberg --- mm/slob.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/slob.c b/mm/slob.c index a2d4ab32198d..f92e66d558bd 100644 --- a/mm/slob.c +++ b/mm/slob.c @@ -60,6 +60,7 @@ #include #include #include +#include /* struct reclaim_state */ #include #include #include @@ -255,6 +256,8 @@ static void *slob_new_pages(gfp_t gfp, int order, int node) static void slob_free_pages(void *b, int order) { + if (current->reclaim_state) + current->reclaim_state->reclaimed_slab += 1 << order; free_pages((unsigned long)b, order); } @@ -407,7 +410,7 @@ static void slob_free(void *block, int size) spin_unlock_irqrestore(&slob_lock, flags); clear_slob_page(sp); free_slob_page(sp); - free_page((unsigned long)b); + slob_free_pages(b, 0); return; } From 35edb4003c9589c49602e29cee1e78d820a1388f Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Wed, 6 May 2009 09:06:04 +0200 Subject: [PATCH 042/670] ALSA: Release v1.0.20 Signed-off-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- include/sound/version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/sound/version.h b/include/sound/version.h index a7e74e23ad2e..456f1359e1c0 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h */ -#define CONFIG_SND_VERSION "1.0.19" +#define CONFIG_SND_VERSION "1.0.20" #define CONFIG_SND_DATE "" From b2c0cea6b1cb210e962f07047df602875564069e Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 5 May 2009 19:04:29 -0400 Subject: [PATCH 043/670] nfsd4: check for negative dentry before use in nfsv4 readdir After 2f9092e1020246168b1309b35e085ecd7ff9ff72 "Fix i_mutex vs. readdir handling in nfsd" (and 14f7dd63 "Copy XFS readdir hack into nfsd code"), an entry may be removed between the first mutex_unlock and the second mutex_lock. In this case, lookup_one_len() will return a negative dentry. Check for this case to avoid a NULL dereference. Signed-off-by: J. Bruce Fields Reviewed-by: J. R. Okajima Cc: stable@kernel.org --- fs/nfsd/nfs4xdr.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index b820c311931c..b73549d293be 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -2214,6 +2214,15 @@ nfsd4_encode_dirent_fattr(struct nfsd4_readdir *cd, dentry = lookup_one_len(name, cd->rd_fhp->fh_dentry, namlen); if (IS_ERR(dentry)) return nfserrno(PTR_ERR(dentry)); + if (!dentry->d_inode) { + /* + * nfsd_buffered_readdir drops the i_mutex between + * readdir and calling this callback, leaving a window + * where this directory entry could have gone away. + */ + dput(dentry); + return nfserr_noent; + } exp_get(exp); /* @@ -2276,6 +2285,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen, struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common); int buflen; __be32 *p = cd->buffer; + __be32 *cookiep; __be32 nfserr = nfserr_toosmall; /* In nfsv4, "." and ".." never make it onto the wire.. */ @@ -2292,7 +2302,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen, goto fail; *p++ = xdr_one; /* mark entry present */ - cd->offset = p; /* remember pointer */ + cookiep = p; p = xdr_encode_hyper(p, NFS_OFFSET_MAX); /* offset of next entry */ p = xdr_encode_array(p, name, namlen); /* name length & name */ @@ -2306,6 +2316,8 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen, goto fail; case nfserr_dropit: goto fail; + case nfserr_noent: + goto skip_entry; default: /* * If the client requested the RDATTR_ERROR attribute, @@ -2324,6 +2336,8 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen, } cd->buflen -= (p - cd->buffer); cd->buffer = p; + cd->offset = cookiep; +skip_entry: cd->common.err = nfs_ok; return 0; fail: From d1a2627a29667fe7c4a9d06e1579a2d65bd39bba Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Mon, 30 Mar 2009 17:50:17 -0700 Subject: [PATCH 044/670] wimax: fix oops if netlink fails to add attribute When sending a message to user space using wimax_msg(), if nla_put() fails, correctly interpret the return code from wimax_msg_alloc() as an err ptr and return the error code instead of crashing (as it is assuming than non-NULL means the pointer is ok). Signed-off-by: Inaky Perez-Gonzalez --- net/wimax/op-msg.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c index 5d149c1b5f0d..9ad4d893a566 100644 --- a/net/wimax/op-msg.c +++ b/net/wimax/op-msg.c @@ -149,7 +149,8 @@ struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev, } result = nla_put(skb, WIMAX_GNL_MSG_DATA, size, msg); if (result < 0) { - dev_err(dev, "no memory to add payload in attribute\n"); + dev_err(dev, "no memory to add payload (msg %p size %zu) in " + "attribute: %d\n", msg, size, result); goto error_nla_put; } genlmsg_end(skb, genl_msg); @@ -299,10 +300,10 @@ int wimax_msg(struct wimax_dev *wimax_dev, const char *pipe_name, struct sk_buff *skb; skb = wimax_msg_alloc(wimax_dev, pipe_name, buf, size, gfp_flags); - if (skb == NULL) - goto error_msg_new; - result = wimax_msg_send(wimax_dev, skb); -error_msg_new: + if (IS_ERR(skb)) + result = PTR_ERR(skb); + else + result = wimax_msg_send(wimax_dev, skb); return result; } EXPORT_SYMBOL_GPL(wimax_msg); From 94c7f2d49521b0bb3ab91cbeb3518ac34355d47f Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Sat, 2 May 2009 02:30:28 -0700 Subject: [PATCH 045/670] wimax: oops: wimax_dev_add() is the only one that can initialize the state When a new wimax_dev is created, it's state has to be __WIMAX_ST_NULL until wimax_dev_add() is succesfully called. This allows calls into the stack that happen before said time to be rejected. Until now, the state was being set (by mistake) to UNINITIALIZED, which was allowing calls such as wimax_report_rfkill_hw() to go through even when a call to wimax_dev_add() had failed; that was causing an oops when touching uninitialized data. This situation is normal when the device starts reporting state before the whole initialization has been completed. It just has to be dealt with. Signed-off-by: Inaky Perez-Gonzalez --- net/wimax/stack.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/net/wimax/stack.c b/net/wimax/stack.c index a0ee76b52510..933e1422b09f 100644 --- a/net/wimax/stack.c +++ b/net/wimax/stack.c @@ -338,8 +338,21 @@ out: */ void wimax_state_change(struct wimax_dev *wimax_dev, enum wimax_st new_state) { + /* + * A driver cannot take the wimax_dev out of the + * __WIMAX_ST_NULL state unless by calling wimax_dev_add(). If + * the wimax_dev's state is still NULL, we ignore any request + * to change its state because it means it hasn't been yet + * registered. + * + * There is no need to complain about it, as routines that + * call this might be shared from different code paths that + * are called before or after wimax_dev_add() has done its + * job. + */ mutex_lock(&wimax_dev->mutex); - __wimax_state_change(wimax_dev, new_state); + if (wimax_dev->state > __WIMAX_ST_NULL) + __wimax_state_change(wimax_dev, new_state); mutex_unlock(&wimax_dev->mutex); return; } @@ -376,7 +389,7 @@ EXPORT_SYMBOL_GPL(wimax_state_get); void wimax_dev_init(struct wimax_dev *wimax_dev) { INIT_LIST_HEAD(&wimax_dev->id_table_node); - __wimax_state_set(wimax_dev, WIMAX_ST_UNINITIALIZED); + __wimax_state_set(wimax_dev, __WIMAX_ST_NULL); mutex_init(&wimax_dev->mutex); mutex_init(&wimax_dev->mutex_reset); } From 89996df4b5b1a09c279f50b3fd03aa9df735f5cb Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Wed, 6 May 2009 16:32:54 -0400 Subject: [PATCH 046/670] lockd: fix list corruption on lockd restart If lockd is signalled soon enough after restart then locks_start_grace() will try to re-add an entry to a list and trigger a lock corruption warning. Thanks to Wang Chen for the problem report and diagnosis. WARNING: at lib/list_debug.c:26 __list_add+0x27/0x5c() ... list_add corruption. next->prev should be prev (ef8fe958), but was ef8ff128. (next=ef8ff128). ... Pid: 23062, comm: lockd Tainted: G W 2.6.30-rc2 #3 Call Trace: [] warn_slowpath+0x71/0xa0 [] ? update_curr+0x11d/0x125 [] ? trace_hardirqs_on_caller+0x18/0x150 [] ? trace_hardirqs_on+0xb/0xd [] ? _raw_spin_lock+0x53/0xfa [] __list_add+0x27/0x5c [] locks_start_grace+0x22/0x30 [lockd] [] set_grace_period+0x39/0x53 [lockd] [] ? lock_kernel+0x1c/0x28 [] lockd+0x64/0x164 [lockd] [] ? trace_hardirqs_on_caller+0x18/0x150 [] ? complete+0x34/0x3e [] ? lockd+0x0/0x164 [lockd] [] ? lockd+0x0/0x164 [lockd] [] kthread+0x45/0x6b [] ? kthread+0x0/0x6b [] kernel_thread_helper+0x7/0x10 Reported-by: Wang Chen Signed-off-by: J. Bruce Fields Cc: stable@kernel.org --- fs/lockd/svc.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c index abf83881f68a..1a54ae14a192 100644 --- a/fs/lockd/svc.c +++ b/fs/lockd/svc.c @@ -104,6 +104,16 @@ static void set_grace_period(void) schedule_delayed_work(&grace_period_end, grace_period); } +static void restart_grace(void) +{ + if (nlmsvc_ops) { + cancel_delayed_work_sync(&grace_period_end); + locks_end_grace(&lockd_manager); + nlmsvc_invalidate_all(); + set_grace_period(); + } +} + /* * This is the lockd kernel thread */ @@ -149,10 +159,7 @@ lockd(void *vrqstp) if (signalled()) { flush_signals(current); - if (nlmsvc_ops) { - nlmsvc_invalidate_all(); - set_grace_period(); - } + restart_grace(); continue; } From 77a22941f9ed052a0fdaa92753b1a1ab8072ee76 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 6 May 2009 16:43:48 -0700 Subject: [PATCH 047/670] igb: resolve panic on shutdown when SR-IOV is enabled The setup_rctl call was making a call into the ring structure after it had been freed. This was causing a panic on shutdown. This call wasn't necessary since it is possible to get the needed index from adapter->vfs_allocated_count. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 08c801490c72..e25343588fc7 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2006,7 +2006,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; u32 rctl; u32 srrctl = 0; - int i, j; + int i; rctl = rd32(E1000_RCTL); @@ -2071,8 +2071,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter) if (adapter->vfs_allocated_count) { u32 vmolr; - j = adapter->rx_ring[0].reg_idx; - /* set all queue drop enable bits */ wr32(E1000_QDE, ALL_QUEUES); srrctl |= E1000_SRRCTL_DROP_EN; @@ -2080,16 +2078,16 @@ static void igb_setup_rctl(struct igb_adapter *adapter) /* disable queue 0 to prevent tail write w/o re-config */ wr32(E1000_RXDCTL(0), 0); - vmolr = rd32(E1000_VMOLR(j)); + vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count)); if (rctl & E1000_RCTL_LPE) vmolr |= E1000_VMOLR_LPE; - if (adapter->num_rx_queues > 0) + if (adapter->num_rx_queues > 1) vmolr |= E1000_VMOLR_RSSE; - wr32(E1000_VMOLR(j), vmolr); + wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr); } for (i = 0; i < adapter->num_rx_queues; i++) { - j = adapter->rx_ring[i].reg_idx; + int j = adapter->rx_ring[i].reg_idx; wr32(E1000_SRRCTL(j), srrctl); } From 6473990c7f0565fca2007f8662395d122e30f0d8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 6 May 2009 16:45:07 -0700 Subject: [PATCH 048/670] net-sched: fix bfifo default limit When no limit is given, the bfifo uses a default of tx_queue_len * mtu. Packets handled by qdiscs include the link layer header, so this should be taken into account, similar to what other qdiscs do. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/sched/sch_fifo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_fifo.c b/net/sched/sch_fifo.c index 92cfc9d7e3b9..69188e8358b4 100644 --- a/net/sched/sch_fifo.c +++ b/net/sched/sch_fifo.c @@ -51,7 +51,7 @@ static int fifo_init(struct Qdisc *sch, struct nlattr *opt) u32 limit = qdisc_dev(sch)->tx_queue_len ? : 1; if (sch->ops == &bfifo_qdisc_ops) - limit *= qdisc_dev(sch)->mtu; + limit *= psched_mtu(qdisc_dev(sch)); q->limit = limit; } else { From 581daf7e00c5e766f26aff80a61a860a17b0d75a Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 6 May 2009 16:46:47 -0700 Subject: [PATCH 049/670] bnx2: Fix panic in bnx2_poll_work(). Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue: http://bugzilla.kernel.org/show_bug.cgi?id=12698 This issue was reported by multiple i386 users. Without barrier(), the compiled code looks like the following where %eax contains the address of the tx_cons or rx_cons in the DMA status block. The status block contents can change between the cmpb and the movzwl instruction. The driver would crash if the value was not 0xff during the cmpb instruction, but changed to 0xff during the movzwl instruction. 6828: 80 38 ff cmpb $0xff,(%eax) 682b: 0f b7 10 movzwl (%eax),%edx With the added barrier(), the compiled code now looks correct: 683d: 0f b7 10 movzwl (%eax),%edx 6840: 0f b6 c2 movzbl %dl,%eax 6843: 3d ff 00 00 00 cmp $0xff,%eax Thanks to Pascal de Bruijn for reporting the problem and Holger Noefer for patiently testing test patches for us. Also updated version to 2.0.1. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d47839184a06..b0cb29d4cc01 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -54,8 +54,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "2.0.0" -#define DRV_MODULE_RELDATE "April 2, 2009" +#define DRV_MODULE_VERSION "2.0.1" +#define DRV_MODULE_RELDATE "May 6, 2009" #define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-4.6.16.fw" #define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-4.6.16.fw" #define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-4.6.17.fw" @@ -2600,6 +2600,7 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi) /* Tell compiler that status block fields can change. */ barrier(); cons = *bnapi->hw_tx_cons_ptr; + barrier(); if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT)) cons++; return cons; @@ -2879,6 +2880,7 @@ bnx2_get_hw_rx_cons(struct bnx2_napi *bnapi) /* Tell compiler that status block fields can change. */ barrier(); cons = *bnapi->hw_rx_cons_ptr; + barrier(); if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)) cons++; return cons; From b805007545813d276c844f0f6d6c825b07c6aec6 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 6 May 2009 16:49:18 -0700 Subject: [PATCH 050/670] net: update skb_recycle_check() for hardware timestamping changes Commit ac45f602ee3d1b6f326f68bc0c2591ceebf05ba4 ("net: infrastructure for hardware time stamping") added two skb initialization actions to __alloc_skb(), which need to be added to skb_recycle_check() as well. Signed-off-by: Lennert Buytenhek Signed-off-by: Patrick Ohly Signed-off-by: David S. Miller --- net/core/skbuff.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index f091a5a845c1..d152394b2611 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -502,7 +502,9 @@ int skb_recycle_check(struct sk_buff *skb, int skb_size) shinfo->gso_segs = 0; shinfo->gso_type = 0; shinfo->ip6_frag_id = 0; + shinfo->tx_flags.flags = 0; shinfo->frag_list = NULL; + memset(&shinfo->hwtstamps, 0, sizeof(shinfo->hwtstamps)); memset(skb, 0, offsetof(struct sk_buff, tail)); skb->data = skb->head + NET_SKB_PAD; From 54f2c841fa0007e5fee3b7d01a911c774f0a6cda Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Thu, 7 May 2009 17:28:59 +0200 Subject: [PATCH 051/670] oprofile: fix cpu buffer size The unit of oprofile_cpu_buffer_size is in samples, but was allocated in bytes. This led to the allocation of too small cpu buffers. This patch recalculates the buffer size in bytes taking also the ring_buffer_event header size into account. Reported-by: Suravee Suthikulpanit Signed-off-by: Robert Richter --- drivers/oprofile/cpu_buffer.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index f0e99d4c066b..242257b19441 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -78,16 +78,20 @@ void free_cpu_buffers(void) op_ring_buffer_write = NULL; } +#define RB_EVENT_HDR_SIZE 4 + int alloc_cpu_buffers(void) { int i; unsigned long buffer_size = oprofile_cpu_buffer_size; + unsigned long byte_size = buffer_size * (sizeof(struct op_sample) + + RB_EVENT_HDR_SIZE); - op_ring_buffer_read = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS); + op_ring_buffer_read = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS); if (!op_ring_buffer_read) goto fail; - op_ring_buffer_write = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS); + op_ring_buffer_write = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS); if (!op_ring_buffer_write) goto fail; From 51991763416251f259efbfe459c16f331f31d01f Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 15:24:31 -0400 Subject: [PATCH 052/670] ACPICA: use acpi.* modparam namespace Add acpi/acpica/*.c to the acpi.* modparam namespace so that any modparams we stick into ACPICA do not expose ACPICA filenames to users. There are currently only two modparams in ACPICA, just recently added for http://bugzilla.kernel.org/show_bug.cgi?id=13041 With this change, they become acpi.gts=1 acpi.bfs=1 rather than hwsleep.gts=1 hwsleep.bfs=1 Signed-off-by: Len Brown --- drivers/acpi/acpica/Makefile | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 17e50824a6f1..72ac28da14e3 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -5,40 +5,43 @@ ccflags-y := -Os ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT -obj-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ +# use acpi.o to put all files here into acpi.o modparam namespace +obj-y += acpi.o + +acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ dsmethod.o dsobject.o dsutils.o dswload.o dswstate.o \ dsinit.o -obj-y += evevent.o evregion.o evsci.o evxfevnt.o \ +acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \ evmisc.o evrgnini.o evxface.o evxfregn.o \ evgpe.o evgpeblk.o -obj-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ +acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\ excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \ exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o -obj-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o +acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o -obj-$(ACPI_FUTURE_USAGE) += hwtimer.o +acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o -obj-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \ +acpi-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \ nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \ nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o \ nsparse.o nspredef.o -obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o +acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o -obj-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \ +acpi-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \ psopcode.o psscope.o psutils.o psxface.o -obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \ +acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \ rscalc.o rsirq.o rsmemory.o rsutils.o -obj-$(ACPI_FUTURE_USAGE) += rsdump.o +acpi-$(ACPI_FUTURE_USAGE) += rsdump.o -obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o +acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o -obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ +acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ utcopy.o utdelete.o utglobal.o utmath.o utobject.o \ utstate.o utmutex.o utobject.o utresrc.o utlock.o From d3584183d2f40f40371e288ceef187d04da213b5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 7 May 2009 15:36:13 -0700 Subject: [PATCH 053/670] sparc64: Fix SET_PERSONALITY to not clip bits outside of PER_MASK. Signed-off-by: David S. Miller --- arch/sparc/include/asm/elf_64.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index 425c2f9be6d5..d42e393078c4 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -208,8 +208,9 @@ do { unsigned long new_flags = current_thread_info()->flags; \ else \ clear_thread_flag(TIF_ABI_PENDING); \ /* flush_thread will update pgd cache */ \ - if (current->personality != PER_LINUX32) \ - set_personality(PER_LINUX); \ + if (personality(current->personality) != PER_LINUX32) \ + set_personality(PER_LINUX | \ + (current->personality & (~PER_MASK))); \ } while (0) #endif /* !(__ASM_SPARC64_ELF_H) */ From 9b05126baa146fc3f41360164141d4e1b3ea93c4 Mon Sep 17 00:00:00 2001 From: Ashish Karkare Date: Thu, 7 May 2009 16:31:01 -0700 Subject: [PATCH 054/670] net: remove stale reference to fastroute from Kconfig help text Signed-off-by: Ashish Karkare Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- net/Kconfig | 6 ------ 1 file changed, 6 deletions(-) diff --git a/net/Kconfig b/net/Kconfig index ce77db4fcec8..c19f549c8e74 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -119,12 +119,6 @@ menuconfig NETFILTER under "iptables" for the location of these packages. - Make sure to say N to "Fast switching" below if you intend to say Y - here, as Fast switching currently bypasses netfilter. - - Chances are that you should say Y here if you compile a kernel which - will run as a router and N for regular hosts. If unsure, say N. - if NETFILTER config NETFILTER_DEBUG From 5afc4abe7902b8453c248321daa9b13b12d9c838 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 21:11:56 -0400 Subject: [PATCH 055/670] ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 7e8ee49ebd40..3a3d1565a7dd 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -562,6 +562,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5710Z", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"), + }, + }, {} }; From d07a9cba6be5c0e947afc1014b5a62182a86f1f1 Mon Sep 17 00:00:00 2001 From: Tim Cole Date: Thu, 7 May 2009 17:08:42 -0700 Subject: [PATCH 056/670] Input: joydev - blacklist digitizers BTN_TOUCH is not set by the wacom driver which causes it to be handled by the joydev driver while the resulting device is broken. This causes problems with applications that try to use a joystick device. Ubuntu BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/300143 Signed-off-by: Tim Cole Signed-off-by: Stefan Bader Acked-by: Tim Gardner Acked-by: Amit Kucheria Signed-off-by: Dmitry Torokhov --- drivers/input/joydev.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 4224f0112849..012a5e753991 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -843,7 +843,13 @@ static const struct input_device_id joydev_blacklist[] = { INPUT_DEVICE_ID_MATCH_KEYBIT, .evbit = { BIT_MASK(EV_KEY) }, .keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) }, - }, /* Avoid itouchpads, touchscreens and tablets */ + }, /* Avoid itouchpads and touchscreens */ + { + .flags = INPUT_DEVICE_ID_MATCH_EVBIT | + INPUT_DEVICE_ID_MATCH_KEYBIT, + .evbit = { BIT_MASK(EV_KEY) }, + .keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) }, + }, /* Avoid tablets, digitisers and similar devices */ { } /* Terminating entry */ }; From 9e68177ef93b2f34eee5a1e1707bceef4b9ba69c Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Thu, 7 May 2009 17:14:21 -0700 Subject: [PATCH 057/670] Input: ff-memless - fix signed to unsigned bit overflow When userspace sets effect->u.rumble.strong_magnitude to 0x8001 or larger, ml_combine_effects() would always return strong_magnitude 0xffff. Problem is that 'gain' is passed in as signed integer. Multiplying magnitude (__u16) with gain (int) causes magnitude read as signed and results negative value (with magnitude > 0x8000). This signed integer is then divided and value, still negative, converted to 32bit unsigned integer. Finally checking combine overflow min(new+old, 0xffff) gives out 0xffff. Fix is to simply change 'gain' to unsigned int. Signed-off-by: Jussi Kivilinna Acked-by: Anssi Hannula Signed-off-by: Dmitry Torokhov --- drivers/input/ff-memless.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index bc4e40f3ede7..2d1415e16834 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -226,7 +226,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type) */ static void ml_combine_effects(struct ff_effect *effect, struct ml_effect_state *state, - int gain) + unsigned int gain) { struct ff_effect *new = state->effect; unsigned int strong, weak, i; From ddc50b6ad634d9ce2526a777d4b7da80effdfb60 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 8 May 2009 00:07:30 -0400 Subject: [PATCH 058/670] ACPI: power: update error message "Transitioning device [%s] to D%d" is not correct. We print this line when we attempted to transition the device, and it failed. So instead, print "Device [%s] failed to transition to D%d\n" This can happen under two conditions: 1. acpi_power_transition() fails when trying to handle the _ON/_OFF for associated power resource. 2. acpi_evaluate_object() on the explicit _PS0/_PS3 for that actual device could fail. this change clarifies, but doesn't fix http://bugzilla.kernel.org/show_bug.cgi?id=13243 Signed-off-by: Len Brown --- drivers/acpi/bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index e8f7b64e92da..ae862f1798dc 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state) end: if (result) printk(KERN_WARNING PREFIX - "Transitioning device [%s] to D%d\n", + "Device [%s] failed to transition to D%d\n", device->pnp.bus_id, state); else { device->power.state = state; From 19bde778c1fd2574cc020a618d7d576f260271ca Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 8 May 2009 00:22:29 -0400 Subject: [PATCH 059/670] ACPI: suspend: don't let device _PS3 failure prevent suspend 6328a57401dc5f5cf9931738eb7268fcd8058c49 "Enable PNPACPI _PSx Support, v3" added a call to acpi_bus_set_power(handle, ACPI_STATE_D3) to pnpacpi_disable_resource() before the existing call to evaluate _DIS on the device. This caused suspend to fail on the system in http://bugzilla.kernel.org/show_bug.cgi?id=13243 because the sanity check to verify we entered _PS3 failed on the serial port. As a work-around, that sanity check can be disabled system-wide with "acpi.power_nocheck=1" Or perhaps we should just shrug off the _PS3 failure and carry on with _DIS like we used to -- which is what this patch does. Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 9a3a682c6981..9496494f340e 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -110,11 +110,9 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev) /* acpi_unregister_gsi(pnp_irq(dev, 0)); */ ret = 0; - if (acpi_bus_power_manageable(handle)) { - ret = acpi_bus_set_power(handle, ACPI_STATE_D3); - if (ret) - return ret; - } + if (acpi_bus_power_manageable(handle)) + acpi_bus_set_power(handle, ACPI_STATE_D3); + /* continue even if acpi_bus_set_power() fails */ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL))) ret = -ENODEV; return ret; From 2b6b7d4be487bada8c727df829c25068c7b5e5a3 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 7 May 2009 21:35:13 -0700 Subject: [PATCH 060/670] IB/mlx4: Don't overwrite fast registration page list when posting work request The low-level mlx4 driver modified the page-list addresses for fast register work requests post send to big-endian, and set a "present" bit. This caused problems later when the consumer attempted to unmap the pages using the page-list (using the list addresses which were assumed to be still in CPU-endian order). Fix the mlx4 driver to allocate two buffers and use a private buffer for the hardware-format bus addresses. This patch fixes , an NFS/RDMA server crash. The cause of the crash was found by Vu Pham of Mellanox. The fix is along the lines suggested by Steve Wise in comment #21 in bug 1571. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/mlx4_ib.h | 1 + drivers/infiniband/hw/mlx4/mr.c | 10 ++++++++-- drivers/infiniband/hw/mlx4/qp.c | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 9974e886b8de..8a7dd6795fa0 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -86,6 +86,7 @@ struct mlx4_ib_mr { struct mlx4_ib_fast_reg_page_list { struct ib_fast_reg_page_list ibfrpl; + __be64 *mapped_page_list; dma_addr_t map; }; diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c index 8e4d26d56a95..8f3666b20ea4 100644 --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -231,7 +231,11 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device if (!mfrpl) return ERR_PTR(-ENOMEM); - mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev, + mfrpl->ibfrpl.page_list = kmalloc(size, GFP_KERNEL); + if (!mfrpl->ibfrpl.page_list) + goto err_free; + + mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev, size, &mfrpl->map, GFP_KERNEL); if (!mfrpl->ibfrpl.page_list) @@ -242,6 +246,7 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device return &mfrpl->ibfrpl; err_free: + kfree(mfrpl->ibfrpl.page_list); kfree(mfrpl); return ERR_PTR(-ENOMEM); } @@ -252,8 +257,9 @@ void mlx4_ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list) struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list); int size = page_list->max_page_list_len * sizeof (u64); - dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list, + dma_free_coherent(&dev->dev->pdev->dev, size, mfrpl->mapped_page_list, mfrpl->map); + kfree(mfrpl->ibfrpl.page_list); kfree(mfrpl); } diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index f385a24d31d2..20724aee76f4 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1365,7 +1365,7 @@ static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr) int i; for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i) - wr->wr.fast_reg.page_list->page_list[i] = + mfrpl->mapped_page_list[i] = cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] | MLX4_MTT_FLAG_PRESENT); From 5dd17cb992ef4c1ebb1a2d60cbef4b6967974673 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 7 May 2009 16:22:53 +0200 Subject: [PATCH 061/670] ALSA: hda - Fix line-in on Mac Mini Core2 Duo BIOS on Mac Mini Core2 Duo sets both INPUT and OUTPUT pinctl bits to the line-in jack, and it confuses the driver as if it's a valid input. This patch adds the check of OUTPUT bit so that the driver fixes the invalid pin setup. Tested-by: Tino Keitel Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 917bc5d3ac2c..03b3646018a1 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4079,7 +4079,12 @@ static int stac92xx_init(struct hda_codec *codec) pinctl = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0); /* if PINCTL already set then skip */ - if (!(pinctl & AC_PINCTL_IN_EN)) { + /* Also, if both INPUT and OUTPUT are set, + * it must be a BIOS bug; need to override, too + */ + if (!(pinctl & AC_PINCTL_IN_EN) || + (pinctl & AC_PINCTL_OUT_EN)) { + pinctl &= ~AC_PINCTL_OUT_EN; pinctl |= AC_PINCTL_IN_EN; stac92xx_auto_set_pinctl(codec, nid, pinctl); From e81963b180ac502fda0326edf059b1e29cdef1a2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 8 May 2009 12:45:26 -0700 Subject: [PATCH 062/670] ipv4: Make INET_LRO a bool instead of tristate. This code is used as a library by several device drivers, which select INET_LRO. If some are modules and some are statically built into the kernel, we get build failures if INET_LRO is modular. Signed-off-by: David S. Miller --- net/ipv4/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index b2cf91e4ccaa..9d26a3da37e5 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -407,7 +407,7 @@ config INET_XFRM_MODE_BEET If unsure, say Y. config INET_LRO - tristate "Large Receive Offload (ipv4/tcp)" + bool "Large Receive Offload (ipv4/tcp)" ---help--- Support for Large Receive Offload (ipv4/tcp). From cbec415991c0007f5c78fad76294373e8ac2d59a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 1 May 2009 02:27:45 +0400 Subject: [PATCH 063/670] powerpc/fsl_soc: Remove mpc83xx_wdt_init, again commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4 ("gianfar: Convert gianfar to an of_platform_driver"), possibly due merge issues, reintroduced completely unneded mpc83xx_wdt_init call, which I removed some time ago in commit 20d38e01d48019c578ab0ec1464454c0 ("powerpc/fsl_soc: remove mpc83xx_wdt code"). Remove it once again. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_soc.c | 46 ----------------------------------- 1 file changed, 46 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index afe8dbc964aa..5c64ccd402e2 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -208,52 +208,6 @@ static int __init of_add_fixed_phys(void) arch_initcall(of_add_fixed_phys); #endif /* CONFIG_FIXED_PHY */ -#ifdef CONFIG_PPC_83xx -static int __init mpc83xx_wdt_init(void) -{ - struct resource r; - struct device_node *np; - struct platform_device *dev; - u32 freq = fsl_get_sys_freq(); - int ret; - - np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt"); - - if (!np) { - ret = -ENODEV; - goto nodev; - } - - memset(&r, 0, sizeof(r)); - - ret = of_address_to_resource(np, 0, &r); - if (ret) - goto err; - - dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1); - if (IS_ERR(dev)) { - ret = PTR_ERR(dev); - goto err; - } - - ret = platform_device_add_data(dev, &freq, sizeof(freq)); - if (ret) - goto unreg; - - of_node_put(np); - return 0; - -unreg: - platform_device_unregister(dev); -err: - of_node_put(np); -nodev: - return ret; -} - -arch_initcall(mpc83xx_wdt_init); -#endif - static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type) { if (!phy_type) From be8be9eccbf2d908a7e56b3f7a71105cd88da06b Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 6 May 2009 15:02:29 +0000 Subject: [PATCH 064/670] ipvs: Fix IPv4 FWMARK virtual services MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes the use of fwmarks to denote IPv4 virtual services which was unfortunately broken as a result of the integration of IPv6 support into IPVS, which was included in 2.6.28. The problem arises because fwmarks are stored in the 4th octet of a union nf_inet_addr .all, however in the case of IPv4 only the first octet, corresponding to .ip, is assigned and compared. In other words, using .all = { 0, 0, 0, htonl(svc->fwmark) always results in a value of 0 (32bits) being stored for IPv4. This means that one fwmark can be used, as it ends up being mapped to 0, but things break down when multiple fwmarks are used, as they all end up being mapped to 0. As fwmarks are 32bits a reasonable fix seems to be to just store the fwmark in .ip, and comparing and storing .ip when fwmarks are used. This patch makes the assumption that in calls to ip_vs_ct_in_get() and ip_vs_sched_persist() if the proto parameter is IPPROTO_IP then we are dealing with an fwmark. I believe this is valid as ip_vs_in() does fairly strict filtering on the protocol and IPPROTO_IP should not be used in these calls unless explicitly passed when making these calls for fwmarks in ip_vs_sched_persist(). Tested-by: Fabien Duchêne Cc: Joseph Mack NA3T Cc: Julius Volz Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- net/netfilter/ipvs/ip_vs_conn.c | 9 +++++++-- net/netfilter/ipvs/ip_vs_core.c | 4 ++-- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c index 60aba45023ff..77bfdfeb966e 100644 --- a/net/netfilter/ipvs/ip_vs_conn.c +++ b/net/netfilter/ipvs/ip_vs_conn.c @@ -260,7 +260,10 @@ struct ip_vs_conn *ip_vs_ct_in_get list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) { if (cp->af == af && ip_vs_addr_equal(af, s_addr, &cp->caddr) && - ip_vs_addr_equal(af, d_addr, &cp->vaddr) && + /* protocol should only be IPPROTO_IP if + * d_addr is a fwmark */ + ip_vs_addr_equal(protocol == IPPROTO_IP ? AF_UNSPEC : af, + d_addr, &cp->vaddr) && s_port == cp->cport && d_port == cp->vport && cp->flags & IP_VS_CONN_F_TEMPLATE && protocol == cp->protocol) { @@ -698,7 +701,9 @@ ip_vs_conn_new(int af, int proto, const union nf_inet_addr *caddr, __be16 cport, cp->cport = cport; ip_vs_addr_copy(af, &cp->vaddr, vaddr); cp->vport = vport; - ip_vs_addr_copy(af, &cp->daddr, daddr); + /* proto should only be IPPROTO_IP if d_addr is a fwmark */ + ip_vs_addr_copy(proto == IPPROTO_IP ? AF_UNSPEC : af, + &cp->daddr, daddr); cp->dport = dport; cp->flags = flags; spin_lock_init(&cp->lock); diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index cb3e031335eb..8dddb17a947a 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -278,7 +278,7 @@ ip_vs_sched_persist(struct ip_vs_service *svc, */ if (svc->fwmark) { union nf_inet_addr fwmark = { - .all = { 0, 0, 0, htonl(svc->fwmark) } + .ip = htonl(svc->fwmark) }; ct = ip_vs_ct_in_get(svc->af, IPPROTO_IP, &snet, 0, @@ -306,7 +306,7 @@ ip_vs_sched_persist(struct ip_vs_service *svc, */ if (svc->fwmark) { union nf_inet_addr fwmark = { - .all = { 0, 0, 0, htonl(svc->fwmark) } + .ip = htonl(svc->fwmark) }; ct = ip_vs_conn_new(svc->af, IPPROTO_IP, From d86c1302c58e4d4ebd99d459c2daff13613ac7f4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 21 Apr 2009 07:22:53 -0700 Subject: [PATCH 065/670] Driver core: platform: fix kernel-doc warnings Fix function parameter notation in platform.c; fixes kernel-doc warnings. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index b5b6c973a2e0..ec5400c32021 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -1028,7 +1028,7 @@ static __initdata LIST_HEAD(early_platform_device_list); /** * early_platform_driver_register - * @edrv: early_platform driver structure + * @epdrv: early_platform driver structure * @buf: string passed from early_param() */ int __init early_platform_driver_register(struct early_platform_driver *epdrv, @@ -1112,7 +1112,7 @@ void __init early_platform_driver_register_all(char *class_str) /** * early_platform_match - * @edrv: early platform driver structure + * @epdrv: early platform driver structure * @id: id to match against */ static __init struct platform_device * @@ -1130,7 +1130,7 @@ early_platform_match(struct early_platform_driver *epdrv, int id) /** * early_platform_left - * @edrv: early platform driver structure + * @epdrv: early platform driver structure * @id: return true if id or above exists */ static __init int early_platform_left(struct early_platform_driver *epdrv, From 441ee4cb874622bc9a11c7b022a38919b04c105f Mon Sep 17 00:00:00 2001 From: Henrik Austad Date: Mon, 20 Apr 2009 18:42:38 -0700 Subject: [PATCH 066/670] Doc/sysfs-rules: Swap the order of the words so the sentence makes more sense Signed-off-by: Henrik Austad Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- Documentation/sysfs-rules.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index 6049a2a84dda..5d8bc2cd250c 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -113,7 +113,7 @@ versions of the sysfs interface. "devices" directory at /sys/subsystem//devices. If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be - ignored. If it does not exist, you have always to scan all three + ignored. If it does not exist, you always have to scan all three places, as the kernel is free to move a subsystem from one place to the other, as long as the devices are still reachable by the same subsystem name. From fe0e2bb9b3ca55b78e637b1260faeaa951523959 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Wed, 22 Apr 2009 15:49:31 -0400 Subject: [PATCH 067/670] Remove old PRINTK_DEBUG config item On Tue, Apr 21, 2009 at 01:55:53PM +0200, Stefan Richter wrote: > Robert P. J. Day wrote: > > lib/Kconfig.debug: select PRINTK_DEBUG > > > > should that perhaps refer to "DYNAMIC_PRINTK_DEBUG"? since there is > > no such thing as a PRINTK_DEBUG Kconfig variable. > > Looks like a rudiment from an earlier version of Jason's "driver core: > basic infrastructure for per-module dynamic debug messages", > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=346e15beb5343c2eb8216d820f2ed8f150822b08 > Search an LKML archive for '+#ifdef CONFIG_PRINTK_DEBUG'. > > Jason, should it be deleted or replaced by something? We re-named 'DYNAMIC_PRINTK_DEBUG' to 'DYNAMIC_DEBUG' in 2.6.30.... 'PRINTK_DEBUG' as pointed out never existed. So, it appears to be extraneous, and should be removed. thanks for pointing it out. Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- lib/Kconfig.debug | 1 - 1 file changed, 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 812c28207baf..6cdcf38f2da9 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -891,7 +891,6 @@ config DYNAMIC_DEBUG default n depends on PRINTK depends on DEBUG_FS - select PRINTK_DEBUG help Compiles debug level messages into the kernel, which would not From bee86321b7b2312fbb62f4cb903eba1cca45e8ad Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 13 Mar 2009 23:06:59 +0800 Subject: [PATCH 068/670] Revert driver core: fix passing platform_data This reverts commit ce21c7bcd796fc4f45d48781b7e85f493cc55ee5: We will remove platform_data field from struct device until all platform devices pass its specific data from platfom_device and all platform drivers use platform specific data passed by platform_device->platform_data. This kind of conversion will need a long time, for thousands of files is affected. To make the conversion easily, we allow platform specific data passed by struct device or struct platform_device and platform driver may use it from struct device or struct platform_device. As we really don't want to do this at all. Cc: David Brownell Cc: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index ec5400c32021..d1d0ee431926 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -247,20 +247,7 @@ int platform_device_add(struct platform_device *pdev) else dev_set_name(&pdev->dev, pdev->name); - /* We will remove platform_data field from struct device - * if all platform devices pass its platform specific data - * from platform_device. The conversion is going to be a - * long time, so we allow the two cases coexist to make - * this kind of fix more easily*/ - if (pdev->platform_data && pdev->dev.platform_data) { - printk(KERN_ERR - "%s: use which platform_data?\n", - dev_name(&pdev->dev)); - } else if (pdev->platform_data) { - pdev->dev.platform_data = pdev->platform_data; - } else if (pdev->dev.platform_data) { - pdev->platform_data = pdev->dev.platform_data; - } + pdev->platform_data = pdev->dev.platform_data; for (i = 0; i < pdev->num_resources; i++) { struct resource *p, *r = &pdev->resource[i]; From e67c85626cd02e306da1b4195bfaf68d61050796 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 8 Mar 2009 23:13:32 +0800 Subject: [PATCH 069/670] Revert driver core: move platform_data into platform_device This reverts commit 006f4571a15fae3a0575f2a0f9e9b63b3d1012f8: This patch moves platform_data from struct device into struct platform_device, based on the two ideas: 1. Now all platform_driver is registered by platform_driver_register, which makes probe()/release()/... of platform_driver passed parameter of platform_device *, so platform driver can get platform_data from platform_device; 2. Other kind of devices do not need to use platform_data, we can decrease size of device if moving it to platform_device. Taking into consideration of thousands of files to be fixed and they can't be finished in one night(maybe it will take a long time), so we keep platform_data in device to allow two kind of cases coexist until all platform devices pass its platfrom data from platform_device->platform_data. All patches to do this kind of conversion are welcome. As we don't really want to do it, it was a bad idea. Cc: David Brownell Cc: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 3 --- include/linux/device.h | 9 ++------- include/linux/platform_device.h | 1 - 3 files changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index d1d0ee431926..8b4708e06244 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -217,7 +217,6 @@ int platform_device_add_data(struct platform_device *pdev, const void *data, if (d) { memcpy(d, data, size); pdev->dev.platform_data = d; - pdev->platform_data = d; } return d ? 0 : -ENOMEM; } @@ -247,8 +246,6 @@ int platform_device_add(struct platform_device *pdev) else dev_set_name(&pdev->dev, pdev->name); - pdev->platform_data = pdev->dev.platform_data; - for (i = 0; i < pdev->num_resources; i++) { struct resource *p, *r = &pdev->resource[i]; diff --git a/include/linux/device.h b/include/linux/device.h index 6a69caaac18a..5d5c197bad45 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -384,13 +384,8 @@ struct device { struct device_driver *driver; /* which driver has allocated this device */ void *driver_data; /* data private to the driver */ - - void *platform_data; /* We will remove platform_data - field if all platform devices - pass its platform specific data - from platform_device->platform_data, - other kind of devices should not - use platform_data. */ + void *platform_data; /* Platform specific data, device + core doesn't touch it */ struct dev_pm_info power; #ifdef CONFIG_NUMA diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 72736fd8223c..b67bb5d7b221 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -20,7 +20,6 @@ struct platform_device { struct device dev; u32 num_resources; struct resource * resource; - void *platform_data; struct platform_device_id *id_entry; }; From 10107bd04fc88657204ca40af2ace33626496fd3 Mon Sep 17 00:00:00 2001 From: Simon Arlott Date: Thu, 23 Apr 2009 18:19:02 +0100 Subject: [PATCH 070/670] USB: cxacru: Fix negative dB output Values of dB between -0.99 and -0.01 will be output with the wrong sign. This converts the negative value to positive and outputs it with a "-" prefix. Signed-off-by: Simon Arlott Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/cxacru.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 6789089e2461..56802d2e994b 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -227,8 +227,14 @@ static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf) static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf) { - return snprintf(buf, PAGE_SIZE, "%d.%02u\n", - value / 100, abs(value) % 100); + if (likely(value >= 0)) { + return snprintf(buf, PAGE_SIZE, "%u.%02u\n", + value / 100, value % 100); + } else { + value = -value; + return snprintf(buf, PAGE_SIZE, "-%u.%02u\n", + value / 100, value % 100); + } } static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf) From 1002bb77c0b7f1241a5108ffa04d836ddc5060c0 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 23 Apr 2009 22:38:12 -0400 Subject: [PATCH 071/670] USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug For reference: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp Signed-off-by: Nicolas Pitre Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 6 ++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8100f1d25904..aab567644b99 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -669,6 +669,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(ADI_VID, ADI_GNICE_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, + { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index c09f658a448b..12330fa1c095 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -919,6 +919,12 @@ #define JETI_VID 0x0c6c #define JETI_SPC1201_PID 0x04b2 +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + /* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ From 72a772a9a3da47e1cdbe01c4aa1105aa8badfff2 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 28 Apr 2009 15:53:02 -0400 Subject: [PATCH 072/670] USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work. If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then cdc-wdm and usbtmc won't get built. Signed-off-by: Andy Lutomirski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 89299a5ce168..0716cdb44cd8 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -27,6 +27,8 @@ obj-$(CONFIG_USB_WUSB) += wusbcore/ obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ +obj-$(CONFIG_USB_WDM) += class/ +obj-$(CONFIG_USB_TMC) += class/ obj-$(CONFIG_USB_STORAGE) += storage/ obj-$(CONFIG_USB) += storage/ From 0f43158caddcbb110916212ebe4e39993ae70864 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 27 Apr 2009 13:22:40 -0400 Subject: [PATCH 073/670] USB: Gadget: fix UTF conversion in the usbstring library This patch (as1234) fixes a bug in the UTF8 -> UTF-16 conversion routine in the gadget/usbstring library. In a UTF-8 multi-byte sequence, all bytes after the first should have their high-order two bits set to 10, not 11. Signed-off-by: Alan Stern Acked-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/usbstring.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 4154be375c7a..58c4d37d312a 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -38,7 +38,7 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) uchar = (c & 0x1f) << 6; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c; @@ -49,13 +49,13 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len) uchar = (c & 0x0f) << 12; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c << 6; c = (u8) *s++; - if ((c & 0xc0) != 0xc0) + if ((c & 0xc0) != 0x80) goto fail; c &= 0x3f; uchar |= c; From 031defd11ee11753110098603236a4257b2cc03d Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 26 Apr 2009 12:47:51 +0200 Subject: [PATCH 074/670] USB: unusual_devs: extend nokia 6288 bcd range This patch was originaly submitted by Phillip Potter but was re-diffed to conform with SubmittingPatches and to rebase on a newer tree by me. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index fa65a3b08601..4b8b69045fe6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -160,8 +160,9 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Andrew Nayenko */ -UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592, +/* Reported by Andrew Nayenko + * Updated for new firmware by Phillip Potter */ +UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610, "Nokia", "Nokia 6288", US_SC_DEVICE, US_PR_DEVICE, NULL, From c45d63202fbaccef7ef7946c03f27f72c809b1cc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 30 Apr 2009 10:06:19 -0400 Subject: [PATCH 075/670] usb-serial: ftdi_sio: fix reference counting of ftdi_private This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern Reported-by: Daniel Mack Tested-by: Daniel Mack Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index aab567644b99..0ab8474b00cb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -56,6 +56,7 @@ static __u16 vendor = FTDI_VID; static __u16 product; struct ftdi_private { + struct kref kref; ftdi_chip_type_t chip_type; /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ @@ -1354,6 +1355,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) return -ENOMEM; } + kref_init(&priv->kref); spin_lock_init(&priv->rx_lock); spin_lock_init(&priv->tx_lock); init_waitqueue_head(&priv->delta_msr_wait); @@ -1470,6 +1472,13 @@ static void ftdi_shutdown(struct usb_serial *serial) dbg("%s", __func__); } +static void ftdi_sio_priv_release(struct kref *k) +{ + struct ftdi_private *priv = container_of(k, struct ftdi_private, kref); + + kfree(priv); +} + static int ftdi_sio_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); @@ -1484,7 +1493,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) if (priv) { usb_set_serial_port_data(port, NULL); - kfree(priv); + kref_put(&priv->kref, ftdi_sio_priv_release); } return 0; @@ -1549,7 +1558,8 @@ static int ftdi_open(struct tty_struct *tty, dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result); - + else + kref_get(&priv->kref); return result; } /* ftdi_open */ @@ -1591,11 +1601,11 @@ static void ftdi_close(struct tty_struct *tty, mutex_unlock(&port->serial->disc_mutex); /* cancel any scheduled reading */ - cancel_delayed_work(&priv->rx_work); - flush_scheduled_work(); + cancel_delayed_work_sync(&priv->rx_work); /* shutdown our bulk read */ usb_kill_urb(port->read_urb); + kref_put(&priv->kref, ftdi_sio_priv_release); } /* ftdi_close */ From 82fbb01cf3c2bd150262269bd017431d7dd74063 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 16 Apr 2009 14:43:14 +0300 Subject: [PATCH 076/670] Staging: w35und: unregister device from the ieee80211 stack upon ->disconnect() Impact: fix module removal This patch fixes an oops when the w35und module is removed from the kernel and added back. Reported-by: luoyi Tested-by: Sandro Bonazzola Cc: Pavel Machek Signed-off-by: Pekka Enberg Signed-off-by: Greg Kroah-Hartman --- drivers/staging/winbond/wbusb.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index 9c3f9439f35e..3b2d52819b4c 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -386,7 +386,7 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id if (err) goto error_free_hw; - usb_set_intfdata(intf, priv); + usb_set_intfdata(intf, dev); return 0; @@ -415,10 +415,15 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter) static void wb35_disconnect(struct usb_interface *intf) { - struct wbsoft_priv *priv = usb_get_intfdata(intf); + struct ieee80211_hw *hw = usb_get_intfdata(intf); + struct wbsoft_priv *priv = hw->priv; wb35_hw_halt(priv); + ieee80211_stop_queues(hw); + ieee80211_unregister_hw(hw); + ieee80211_free_hw(hw); + usb_set_intfdata(intf, NULL); usb_put_dev(interface_to_usbdev(intf)); } From a9ed12e5c149b05adf13bea5f1e96d68c2127faf Mon Sep 17 00:00:00 2001 From: Dave Hayes Date: Sat, 18 Apr 2009 02:18:37 -0500 Subject: [PATCH 077/670] Staging: rt2870: new device id Hey, I have an Edimax wireless USB adapter that uses the rt2870 chipset. lsusb shows it as follows: Bus 001 Device 002: ID 7392:7717 When I added that ID to rt2870.h, the device came up and worked as expected. From: Dave Hayes Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt2870/rt2870.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h index a42caa370808..a69cf338e498 100644 --- a/drivers/staging/rt2870/rt2870.h +++ b/drivers/staging/rt2870/rt2870.h @@ -145,6 +145,7 @@ {USB_DEVICE(0x0789,0x0162)}, /* Logitec */ \ {USB_DEVICE(0x0789,0x0163)}, /* Logitec */ \ {USB_DEVICE(0x0789,0x0164)}, /* Logitec */ \ + {USB_DEVICE(0x7392,0x7717)}, /* Edimax */ \ { }/* Terminating entry */ \ } From be286fd229e95658516ddf880054ea3c9ad9bb34 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 18 Apr 2009 21:09:08 -0500 Subject: [PATCH 078/670] Staging: rtl8187se: Fix compilation warnings and procfs directory leak Fix some warnings during compilation and correct a programming error that was leaking a directory in /proc. Signed-off-by: Larry Finger Tested-by: Bernhard Schiffner Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/r8180.h | 2 +- drivers/staging/rtl8187se/r8180_core.c | 46 +++++--------------------- 2 files changed, 9 insertions(+), 39 deletions(-) diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h index 12215fc61ddc..db446b7e2e08 100644 --- a/drivers/staging/rtl8187se/r8180.h +++ b/drivers/staging/rtl8187se/r8180.h @@ -19,7 +19,7 @@ #define R8180H -#define RTL8180_MODULE_NAME "rtl8180" +#define RTL8180_MODULE_NAME "r8180" #define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a) #define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a) #define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a) diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c index 6ecd12de4296..e10413cee0df 100644 --- a/drivers/staging/rtl8187se/r8180_core.c +++ b/drivers/staging/rtl8187se/r8180_core.c @@ -640,11 +640,9 @@ void rtl8180_proc_init_one(struct net_device *dev) { struct proc_dir_entry *e; struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev); - priv->dir_dev = create_proc_entry(dev->name, - S_IFDIR | S_IRUGO | S_IXUGO, - rtl8180_proc); + priv->dir_dev = rtl8180_proc; if (!priv->dir_dev) { - DMESGE("Unable to initialize /proc/net/rtl8180/%s\n", + DMESGE("Unable to initialize /proc/net/r8180/%s\n", dev->name); return; } @@ -654,7 +652,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-hw\n", + "/proc/net/r8180/%s/stats-hw\n", dev->name); } @@ -663,7 +661,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-rx\n", + "/proc/net/r8180/%s/stats-rx\n", dev->name); } @@ -673,7 +671,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/stats-tx\n", + "/proc/net/r8180/%s/stats-tx\n", dev->name); } #if 0 @@ -702,7 +700,7 @@ void rtl8180_proc_init_one(struct net_device *dev) if (!e) { DMESGE("Unable to initialize " - "/proc/net/rtl8180/%s/registers\n", + "/proc/net/r8180/%s/registers\n", dev->name); } } @@ -977,13 +975,6 @@ void check_tx_ring(struct net_device *dev, int pri) *tmp & (1<<15)? "ok": "err", *(tmp+4)); } - DMESG("nic at %d", - (nic-nicbegin) / 8 /4); - DMESG("tail at %d", ((int)tail - (int)begin) /8 /4); - DMESG("head at %d", ((int)head - (int)begin) /8 /4); - DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri)); - DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri)); - //rtl8180_reset(dev); return; } @@ -1736,17 +1727,7 @@ short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count, * descriptor's buffer must be 256 byte aligned * we shouldn't be here, since we set DMA mask ! */ - DMESGW("Fixing TX alignment"); - desc = (u32*)((u8*)desc + 256); -#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR)) - desc = (u32*)((u64)desc &~ 0xff); - dma_desc = (dma_addr_t)((u8*)dma_desc + 256); - dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff); -#else - desc = (u32*)((u32)desc &~ 0xff); - dma_desc = (dma_addr_t)((u8*)dma_desc + 256); - dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff); -#endif + WARN(1, "DMA buffer is not aligned\n"); } tmp=desc; for (i=0;irxring=desc; From ca9fc928788a02a0fe975dc3334e6d7ec521b6af Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 24 Apr 2009 17:04:44 -0700 Subject: [PATCH 079/670] Staging: comedi: David doesn't want to get comedi patches He's long moved on from the project. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/TODO | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/comedi/TODO b/drivers/staging/comedi/TODO index 557812958464..15c9348fb938 100644 --- a/drivers/staging/comedi/TODO +++ b/drivers/staging/comedi/TODO @@ -11,4 +11,3 @@ Please send patches to Greg Kroah-Hartman and copy: Ian Abbott Frank Mori Hess - David Schleef From 85c2a74fabadfc561b75fbd7decc6bcbfe873d57 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 28 Apr 2009 23:38:46 +0900 Subject: [PATCH 080/670] nilfs2: fix possible recovery failure due to block creation without writer Some function calls in nilfs_prepare_segment_for_recovery() may fail because they can create blocks on meta data files without configuring a writable FS-instance. Concretely, nilfs_mdt_create_block() routine of meta data files will fail in that case. This fixes the problem by temporarily attaching a writable FS-instace during the function is called. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/recovery.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c index 4fc081e47d70..57afa9d24061 100644 --- a/fs/nilfs2/recovery.c +++ b/fs/nilfs2/recovery.c @@ -407,6 +407,7 @@ void nilfs_dispose_segment_list(struct list_head *head) } static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs, + struct nilfs_sb_info *sbi, struct nilfs_recovery_info *ri) { struct list_head *head = &ri->ri_used_segments; @@ -421,6 +422,7 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs, segnum[2] = ri->ri_segnum; segnum[3] = ri->ri_nextnum; + nilfs_attach_writer(nilfs, sbi); /* * Releasing the next segment of the latest super root. * The next segment is invalidated by this recovery. @@ -459,10 +461,10 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs, nilfs->ns_pseg_offset = 0; nilfs->ns_seg_seq = ri->ri_seq + 2; nilfs->ns_nextnum = nilfs->ns_segnum = segnum[0]; - return 0; failed: /* No need to recover sufile because it will be destroyed on error */ + nilfs_detach_writer(nilfs, sbi); return err; } @@ -728,7 +730,7 @@ int nilfs_recover_logical_segments(struct the_nilfs *nilfs, goto failed; if (ri->ri_need_recovery == NILFS_RECOVERY_ROLLFORWARD_DONE) { - err = nilfs_prepare_segment_for_recovery(nilfs, ri); + err = nilfs_prepare_segment_for_recovery(nilfs, sbi, ri); if (unlikely(err)) { printk(KERN_ERR "NILFS: Error preparing segments for " "recovery.\n"); From 201913ed746c7724a40d33ee5a0b6a1fd2ef3193 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 28 Apr 2009 21:04:59 +0900 Subject: [PATCH 081/670] nilfs2: fix circular locking dependency of writer mutex This fixes the following circular locking dependency problem: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.30-rc3 #5 ------------------------------------------------------- segctord/3895 is trying to acquire lock: (&nilfs->ns_writer_mutex){+.+...}, at: [] nilfs_mdt_get_block+0x89/0x20f [nilfs2] but task is already holding lock: (&bmap->b_sem){++++..}, at: [] nilfs_bmap_propagate+0x14/0x2e [nilfs2] which lock already depends on the new lock. The bugfix is done by replacing call sites of nilfs_get_writer() which are never called from read-only context with direct dereferencing of pointer to a writable FS-instance. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/ioctl.c | 8 +++++--- fs/nilfs2/mdt.c | 13 +++++++------ 2 files changed, 12 insertions(+), 9 deletions(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 108d281ebca5..be387c6b2d46 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -516,14 +516,16 @@ static ssize_t nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags, void *buf, size_t size, size_t nmembs) { - struct nilfs_sb_info *sbi = nilfs_get_writer(nilfs); + struct nilfs_sb_info *sbi = nilfs->ns_writer; int ret; - if (unlikely(!sbi)) + if (unlikely(!sbi)) { + /* never happens because called for a writable mount */ + WARN_ON(1); return -EROFS; + } ret = nilfs_segctor_add_segments_to_be_freed( NILFS_SC(sbi), buf, nmembs); - nilfs_put_writer(nilfs); return (ret < 0) ? ret : nmembs; } diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c index 47dd815433fd..e1c6777931b7 100644 --- a/fs/nilfs2/mdt.c +++ b/fs/nilfs2/mdt.c @@ -77,19 +77,22 @@ static int nilfs_mdt_create_block(struct inode *inode, unsigned long block, void *)) { struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs; - struct nilfs_sb_info *writer = NULL; struct super_block *sb = inode->i_sb; struct nilfs_transaction_info ti; struct buffer_head *bh; int err; if (!sb) { - writer = nilfs_get_writer(nilfs); - if (!writer) { + /* + * Make sure this function is not called from any + * read-only context. + */ + if (!nilfs->ns_writer) { + WARN_ON(1); err = -EROFS; goto out; } - sb = writer->s_super; + sb = nilfs->ns_writer->s_super; } nilfs_transaction_begin(sb, &ti, 0); @@ -127,8 +130,6 @@ static int nilfs_mdt_create_block(struct inode *inode, unsigned long block, err = nilfs_transaction_commit(sb); else nilfs_transaction_abort(sb); - if (writer) - nilfs_put_writer(nilfs); out: return err; } From 92d23f703c608fcb2c8edd74a3fd0f4031e18606 Mon Sep 17 00:00:00 2001 From: Ron Date: Fri, 8 May 2009 22:54:49 +0930 Subject: [PATCH 082/670] sched: Fix fallback sched_clock()'s offset when using jiffies Account for the initial offset to the jiffy count. [ Impact: fix printk timestamps on architectures using fallback sched_clock() ] Signed-off-by: Ron Lee Cc: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/sched_clock.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 819f17ac796e..e1d16c9a7680 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -38,7 +38,8 @@ */ unsigned long long __attribute__((weak)) sched_clock(void) { - return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); + return (unsigned long long)(jiffies - INITIAL_JIFFIES) + * (NSEC_PER_SEC / HZ); } static __read_mostly int sched_clock_running; From 3ba8c7920552865a338e00512715786b54db4da0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 28 Apr 2009 14:54:07 +0200 Subject: [PATCH 083/670] IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization. ENOSYS makes modutils complain about missing kernel module support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof HaÅ‚asa --- arch/arm/mach-ixp4xx/ixp4xx_npe.c | 2 +- drivers/net/arm/ixp4xx_eth.c | 6 +++--- drivers/net/wan/ixp4xx_hss.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 252310234903..7bb8e778e4b6 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -714,7 +714,7 @@ static int __init npe_init_module(void) } if (!found) - return -ENOSYS; + return -ENODEV; return 0; } diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 448487e22fa3..721b5421bf1a 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -338,12 +338,12 @@ static int ixp4xx_mdio_register(void) if (cpu_is_ixp43x()) { /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH)) - return -ENOSYS; + return -ENODEV; mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; } else { /* All MII PHY accesses use NPE-B Ethernet registers */ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) - return -ENOSYS; + return -ENODEV; mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; } @@ -1174,7 +1174,7 @@ static int __devinit eth_init_one(struct platform_device *pdev) regs_phys = IXP4XX_EthC_BASE_PHYS; break; default: - err = -ENOSYS; + err = -ENODEV; goto err_free; } diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 3bf7d3f447db..765a7f5d6aa4 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -1249,7 +1249,7 @@ static int __devinit hss_init_one(struct platform_device *pdev) return -ENOMEM; if ((port->npe = npe_request(0)) == NULL) { - err = -ENOSYS; + err = -ENODEV; goto err_free; } @@ -1311,7 +1311,7 @@ static int __init hss_init_module(void) if ((ixp4xx_read_feature_bits() & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) != (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) - return -ENOSYS; + return -ENODEV; spin_lock_init(&npe_lock); From 7aa6a4786e70fe826b998d1f95ba911a28546844 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Mon, 4 May 2009 21:31:52 +0200 Subject: [PATCH 084/670] IXP4xx: complete Ethernet netdev setup before calling register_netdev(). MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof HaÅ‚asa --- drivers/net/arm/ixp4xx_eth.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 721b5421bf1a..a740053d3af3 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -1189,15 +1189,10 @@ static int __devinit eth_init_one(struct platform_device *pdev) goto err_free; } - if (register_netdev(dev)) { - err = -EIO; - goto err_npe_rel; - } - port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name); if (!port->mem_res) { err = -EBUSY; - goto err_unreg; + goto err_npe_rel; } port->plat = plat; @@ -1215,20 +1210,25 @@ static int __devinit eth_init_one(struct platform_device *pdev) snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy); port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0, PHY_INTERFACE_MODE_MII); - if (IS_ERR(port->phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(port->phydev); - } + if ((err = IS_ERR(port->phydev))) + goto err_free_mem; port->phydev->irq = PHY_POLL; + if ((err = register_netdev(dev))) + goto err_phy_dis; + printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy, npe_name(port->npe)); return 0; -err_unreg: - unregister_netdev(dev); +err_phy_dis: + phy_disconnect(port->phydev); +err_free_mem: + npe_port_tab[NPE_ID(port->id)] = NULL; + platform_set_drvdata(pdev, NULL); + release_resource(port->mem_res); err_npe_rel: npe_release(port->npe); err_free: @@ -1242,6 +1242,7 @@ static int __devexit eth_remove_one(struct platform_device *pdev) struct port *port = netdev_priv(dev); unregister_netdev(dev); + phy_disconnect(port->phydev); npe_port_tab[NPE_ID(port->id)] = NULL; platform_set_drvdata(pdev, NULL); npe_release(port->npe); From 0c7a531a200480c7bc447260376973d830da9069 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 30 Apr 2009 14:52:58 +0100 Subject: [PATCH 085/670] GFS2: Fix glock ref counting bug Depending on the ordering of events as we go around the glock shrinker loop, it is possible to drop the ref count of a glock incorrectly. It doesn't happen very often. This patch corrects the got_ref variable, fixing the problem. Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 1afd9f26bcb1..ff4981090489 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1304,6 +1304,7 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask) nr--; if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) gfs2_glock_put(gl); + got_ref = 0; } spin_lock(&lru_lock); if (may_demote) From 67e55205ec55cc7899f1d783f217961596798419 Mon Sep 17 00:00:00 2001 From: Alessio Igor Bogani Date: Fri, 24 Apr 2009 09:06:53 +0200 Subject: [PATCH 086/670] vfs: umount_begin BKL pushdown Push BKL down into ->umount_begin() Signed-off-by: Alessio Igor Bogani Signed-off-by: Al Viro --- fs/9p/vfs_super.c | 6 +++++- fs/cifs/cifsfs.c | 3 +++ fs/fuse/inode.c | 3 +++ fs/namespace.c | 2 -- fs/nfs/super.c | 7 ++++++- 5 files changed, 17 insertions(+), 4 deletions(-) diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 5f8ab8adb5f5..7d23214e5599 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -230,9 +231,12 @@ static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt) static void v9fs_umount_begin(struct super_block *sb) { - struct v9fs_session_info *v9ses = sb->s_fs_info; + struct v9fs_session_info *v9ses; + lock_kernel(); + v9ses = sb->s_fs_info; v9fs_session_cancel(v9ses); + unlock_kernel(); } static const struct super_operations v9fs_super_ops = { diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 0d6d8b573652..355e0efec0cf 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "cifsfs.h" #include "cifspdu.h" #define DECLARE_GLOBALS_HERE @@ -530,6 +531,7 @@ static void cifs_umount_begin(struct super_block *sb) if (tcon == NULL) return; + lock_kernel(); read_lock(&cifs_tcp_ses_lock); if (tcon->tc_count == 1) tcon->tidStatus = CifsExiting; @@ -548,6 +550,7 @@ static void cifs_umount_begin(struct super_block *sb) } /* BB FIXME - finish add checks for tidStatus BB */ + unlock_kernel(); return; } diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 459b73dd45e1..d1bc4d33ccbc 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -19,6 +19,7 @@ #include #include #include +#include MODULE_AUTHOR("Miklos Szeredi "); MODULE_DESCRIPTION("Filesystem in Userspace"); @@ -259,7 +260,9 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid, static void fuse_umount_begin(struct super_block *sb) { + lock_kernel(); fuse_abort_conn(get_fuse_conn_super(sb)); + unlock_kernel(); } static void fuse_send_destroy(struct fuse_conn *fc) diff --git a/fs/namespace.c b/fs/namespace.c index 41196209a906..0d2003fb4377 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1073,9 +1073,7 @@ static int do_umount(struct vfsmount *mnt, int flags) */ if (flags & MNT_FORCE && sb->s_op->umount_begin) { - lock_kernel(); sb->s_op->umount_begin(sb); - unlock_kernel(); } /* diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 6717200923fe..1679a164c8c9 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -683,9 +683,12 @@ static int nfs_show_stats(struct seq_file *m, struct vfsmount *mnt) */ static void nfs_umount_begin(struct super_block *sb) { - struct nfs_server *server = NFS_SB(sb); + struct nfs_server *server; struct rpc_clnt *rpc; + lock_kernel(); + + server = NFS_SB(sb); /* -EIO all pending I/O */ rpc = server->client_acl; if (!IS_ERR(rpc)) @@ -693,6 +696,8 @@ static void nfs_umount_begin(struct super_block *sb) rpc = server->client; if (!IS_ERR(rpc)) rpc_killall_tasks(rpc); + + unlock_kernel(); } /* From 5a6059c358d3b3004cb6b8562e3b049b1f8564f9 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 1 May 2009 12:11:12 -0400 Subject: [PATCH 087/670] reiserfs: Expand i_mutex to enclose lookup_one_len 2.6.30-rc3 introduced some sanity checks in the VFS code to avoid NFS bugs by ensuring that lookup_one_len is always called under i_mutex. This patch expands the i_mutex locking to enclose lookup_one_len. This was always required, but not not enforced in the reiserfs code since it does locking around the xattr interactions with the xattr_sem. This is obvious enough, and it survived an overnight 50 thread ACL test. Signed-off-by: Jeff Mahoney Signed-off-by: Al Viro --- fs/reiserfs/xattr.c | 32 ++++++++++++++------------------ 1 file changed, 14 insertions(+), 18 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index f83f52bae390..31a3dbb120e1 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -120,25 +120,20 @@ static struct dentry *lookup_or_create_dir(struct dentry *parent, struct dentry *dentry; BUG_ON(!parent); + mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_XATTR); dentry = lookup_one_len(name, parent, strlen(name)); - if (IS_ERR(dentry)) - return dentry; - else if (!dentry->d_inode) { + if (!IS_ERR(dentry) && !dentry->d_inode) { int err = -ENODATA; - if (xattr_may_create(flags)) { - mutex_lock_nested(&parent->d_inode->i_mutex, - I_MUTEX_XATTR); + if (xattr_may_create(flags)) err = xattr_mkdir(parent->d_inode, dentry, 0700); - mutex_unlock(&parent->d_inode->i_mutex); - } if (err) { dput(dentry); dentry = ERR_PTR(err); } } - + mutex_unlock(&parent->d_inode->i_mutex); return dentry; } @@ -184,6 +179,7 @@ fill_with_dentries(void *buf, const char *name, int namelen, loff_t offset, { struct reiserfs_dentry_buf *dbuf = buf; struct dentry *dentry; + WARN_ON_ONCE(!mutex_is_locked(&dbuf->xadir->d_inode->i_mutex)); if (dbuf->count == ARRAY_SIZE(dbuf->dentries)) return -ENOSPC; @@ -349,6 +345,7 @@ static struct dentry *xattr_lookup(struct inode *inode, const char *name, if (IS_ERR(xadir)) return ERR_CAST(xadir); + mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR); xafile = lookup_one_len(name, xadir, strlen(name)); if (IS_ERR(xafile)) { err = PTR_ERR(xafile); @@ -360,18 +357,15 @@ static struct dentry *xattr_lookup(struct inode *inode, const char *name, if (!xafile->d_inode) { err = -ENODATA; - if (xattr_may_create(flags)) { - mutex_lock_nested(&xadir->d_inode->i_mutex, - I_MUTEX_XATTR); + if (xattr_may_create(flags)) err = xattr_create(xadir->d_inode, xafile, 0700|S_IFREG); - mutex_unlock(&xadir->d_inode->i_mutex); - } } if (err) dput(xafile); out: + mutex_unlock(&xadir->d_inode->i_mutex); dput(xadir); if (err) return ERR_PTR(err); @@ -435,6 +429,7 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name) if (IS_ERR(xadir)) return PTR_ERR(xadir); + mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR); dentry = lookup_one_len(name, xadir, strlen(name)); if (IS_ERR(dentry)) { err = PTR_ERR(dentry); @@ -442,14 +437,13 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name) } if (dentry->d_inode) { - mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR); err = xattr_unlink(xadir->d_inode, dentry); - mutex_unlock(&xadir->d_inode->i_mutex); update_ctime(inode); } dput(dentry); out_dput: + mutex_unlock(&xadir->d_inode->i_mutex); dput(xadir); return err; } @@ -906,9 +900,9 @@ static int create_privroot(struct dentry *dentry) { int err; struct inode *inode = dentry->d_parent->d_inode; - mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR); + WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex)); + err = xattr_mkdir(inode, dentry, 0700); - mutex_unlock(&inode->i_mutex); if (err) { dput(dentry); dentry = NULL; @@ -980,6 +974,7 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags) /* If we don't have the privroot located yet - go find it */ if (!REISERFS_SB(s)->priv_root) { struct dentry *dentry; + mutex_lock_nested(&s->s_root->d_inode->i_mutex, I_MUTEX_CHILD); dentry = lookup_one_len(PRIVROOT_NAME, s->s_root, strlen(PRIVROOT_NAME)); if (!IS_ERR(dentry)) { @@ -993,6 +988,7 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags) } } else err = PTR_ERR(dentry); + mutex_unlock(&s->s_root->d_inode->i_mutex); if (!err && dentry) { s->s_root->d_op = &xattr_lookup_poison_ops; From edcc37a0478836b4a51eafb1bcec6a52708f681d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 3 May 2009 06:00:05 -0400 Subject: [PATCH 088/670] Always lookup priv_root on reiserfs mount and keep it ... even if it's a negative dentry. That way we can set ->d_op on root before anyone could race with us. Simplify d_compare(), while we are at it. Signed-off-by: Al Viro --- fs/reiserfs/super.c | 6 ++- fs/reiserfs/xattr.c | 86 ++++++++++++++-------------------- include/linux/reiserfs_xattr.h | 1 + 3 files changed, 41 insertions(+), 52 deletions(-) diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 0ae6486d9046..d444fe0013a4 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -1842,7 +1842,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent) goto error; } - if ((errval = reiserfs_xattr_init(s, s->s_flags))) { + if ((errval = reiserfs_lookup_privroot(s)) || + (errval = reiserfs_xattr_init(s, s->s_flags))) { dput(s->s_root); s->s_root = NULL; goto error; @@ -1855,7 +1856,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent) reiserfs_info(s, "using 3.5.x disk format\n"); } - if ((errval = reiserfs_xattr_init(s, s->s_flags))) { + if ((errval = reiserfs_lookup_privroot(s)) || + (errval = reiserfs_xattr_init(s, s->s_flags))) { dput(s->s_root); s->s_root = NULL; goto error; diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 31a3dbb120e1..2891f789f545 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -903,16 +903,19 @@ static int create_privroot(struct dentry *dentry) WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex)); err = xattr_mkdir(inode, dentry, 0700); - if (err) { - dput(dentry); - dentry = NULL; + if (err || !dentry->d_inode) { + reiserfs_warning(dentry->d_sb, "jdm-20006", + "xattrs/ACLs enabled and couldn't " + "find/create .reiserfs_priv. " + "Failing mount."); + return -EOPNOTSUPP; } - if (dentry && dentry->d_inode) - reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr " - "storage.\n", PRIVROOT_NAME); + dentry->d_inode->i_flags |= S_PRIVATE; + reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr " + "storage.\n", PRIVROOT_NAME); - return err; + return 0; } static int xattr_mount_check(struct super_block *s) @@ -944,11 +947,9 @@ static int xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name) { struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root; - if (name->len == priv_root->d_name.len && - name->hash == priv_root->d_name.hash && - !memcmp(name->name, priv_root->d_name.name, name->len)) { + if (container_of(q1, struct dentry, d_name) == priv_root) return -ENOENT; - } else if (q1->len == name->len && + if (q1->len == name->len && !memcmp(q1->name, name->name, name->len)) return 0; return 1; @@ -958,6 +959,27 @@ static const struct dentry_operations xattr_lookup_poison_ops = { .d_compare = xattr_lookup_poison, }; +int reiserfs_lookup_privroot(struct super_block *s) +{ + struct dentry *dentry; + int err = 0; + + /* If we don't have the privroot located yet - go find it */ + mutex_lock(&s->s_root->d_inode->i_mutex); + dentry = lookup_one_len(PRIVROOT_NAME, s->s_root, + strlen(PRIVROOT_NAME)); + if (!IS_ERR(dentry)) { + REISERFS_SB(s)->priv_root = dentry; + s->s_root->d_op = &xattr_lookup_poison_ops; + if (dentry->d_inode) + dentry->d_inode->i_flags |= S_PRIVATE; + } else + err = PTR_ERR(dentry); + mutex_unlock(&s->s_root->d_inode->i_mutex); + + return err; +} + /* We need to take a copy of the mount flags since things like * MS_RDONLY don't get set until *after* we're called. * mount_flags != mount_options */ @@ -969,48 +991,12 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags) err = xattr_mount_check(s); if (err) goto error; -#endif - /* If we don't have the privroot located yet - go find it */ - if (!REISERFS_SB(s)->priv_root) { - struct dentry *dentry; - mutex_lock_nested(&s->s_root->d_inode->i_mutex, I_MUTEX_CHILD); - dentry = lookup_one_len(PRIVROOT_NAME, s->s_root, - strlen(PRIVROOT_NAME)); - if (!IS_ERR(dentry)) { -#ifdef CONFIG_REISERFS_FS_XATTR - if (!(mount_flags & MS_RDONLY) && !dentry->d_inode) - err = create_privroot(dentry); -#endif - if (!dentry->d_inode) { - dput(dentry); - dentry = NULL; - } - } else - err = PTR_ERR(dentry); + if (!REISERFS_SB(s)->priv_root->d_inode && !(mount_flags & MS_RDONLY)) { + mutex_lock(&s->s_root->d_inode->i_mutex); + err = create_privroot(REISERFS_SB(s)->priv_root); mutex_unlock(&s->s_root->d_inode->i_mutex); - - if (!err && dentry) { - s->s_root->d_op = &xattr_lookup_poison_ops; - dentry->d_inode->i_flags |= S_PRIVATE; - REISERFS_SB(s)->priv_root = dentry; -#ifdef CONFIG_REISERFS_FS_XATTR - /* xattrs are unavailable */ - } else if (!(mount_flags & MS_RDONLY)) { - /* If we're read-only it just means that the dir - * hasn't been created. Not an error -- just no - * xattrs on the fs. We'll check again if we - * go read-write */ - reiserfs_warning(s, "jdm-20006", - "xattrs/ACLs enabled and couldn't " - "find/create .reiserfs_priv. " - "Failing mount."); - err = -EOPNOTSUPP; -#endif - } } - -#ifdef CONFIG_REISERFS_FS_XATTR if (!err) s->s_xattr = reiserfs_xattr_handlers; diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h index dcae01e63e40..fea1a8e65bef 100644 --- a/include/linux/reiserfs_xattr.h +++ b/include/linux/reiserfs_xattr.h @@ -38,6 +38,7 @@ struct nameidata; int reiserfs_xattr_register_handlers(void) __init; void reiserfs_xattr_unregister_handlers(void); int reiserfs_xattr_init(struct super_block *sb, int mount_flags); +int reiserfs_lookup_privroot(struct super_block *sb); int reiserfs_delete_xattrs(struct inode *inode); int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs); From ab17c4f02156c4f75d7fa43a5aa2a7f942d47201 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 5 May 2009 15:30:15 -0400 Subject: [PATCH 089/670] reiserfs: fixup xattr_root caching The xattr_root caching was broken from my previous patch set. It wouldn't cause corruption, but could cause decreased performance due to allocating a larger chunk of the journal (~ 27 blocks) than it would actually use. This patch loads the xattr root dentry at xattr initialization and creates it on-demand. Since we're using the cached dentry, there's no point in keeping lookup_or_create_dir around, so that's removed. Signed-off-by: Jeff Mahoney Signed-off-by: Al Viro --- fs/reiserfs/xattr.c | 81 +++++++++++++++++++++------------- include/linux/reiserfs_fs_sb.h | 2 +- include/linux/reiserfs_xattr.h | 2 +- 3 files changed, 52 insertions(+), 33 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 2891f789f545..c77984473db9 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -113,36 +113,28 @@ static int xattr_rmdir(struct inode *dir, struct dentry *dentry) #define xattr_may_create(flags) (!flags || flags & XATTR_CREATE) -/* Returns and possibly creates the xattr dir. */ -static struct dentry *lookup_or_create_dir(struct dentry *parent, - const char *name, int flags) -{ - struct dentry *dentry; - BUG_ON(!parent); - - mutex_lock_nested(&parent->d_inode->i_mutex, I_MUTEX_XATTR); - dentry = lookup_one_len(name, parent, strlen(name)); - if (!IS_ERR(dentry) && !dentry->d_inode) { - int err = -ENODATA; - - if (xattr_may_create(flags)) - err = xattr_mkdir(parent->d_inode, dentry, 0700); - - if (err) { - dput(dentry); - dentry = ERR_PTR(err); - } - } - mutex_unlock(&parent->d_inode->i_mutex); - return dentry; -} - static struct dentry *open_xa_root(struct super_block *sb, int flags) { struct dentry *privroot = REISERFS_SB(sb)->priv_root; - if (!privroot) + struct dentry *xaroot; + if (!privroot->d_inode) return ERR_PTR(-ENODATA); - return lookup_or_create_dir(privroot, XAROOT_NAME, flags); + + mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR); + + xaroot = dget(REISERFS_SB(sb)->xattr_root); + if (!xaroot->d_inode) { + int err = -ENODATA; + if (xattr_may_create(flags)) + err = xattr_mkdir(privroot->d_inode, xaroot, 0700); + if (err) { + dput(xaroot); + xaroot = ERR_PTR(err); + } + } + + mutex_unlock(&privroot->d_inode->i_mutex); + return xaroot; } static struct dentry *open_xa_dir(const struct inode *inode, int flags) @@ -158,10 +150,22 @@ static struct dentry *open_xa_dir(const struct inode *inode, int flags) le32_to_cpu(INODE_PKEY(inode)->k_objectid), inode->i_generation); - xadir = lookup_or_create_dir(xaroot, namebuf, flags); + mutex_lock_nested(&xaroot->d_inode->i_mutex, I_MUTEX_XATTR); + + xadir = lookup_one_len(namebuf, xaroot, strlen(namebuf)); + if (!IS_ERR(xadir) && !xadir->d_inode) { + int err = -ENODATA; + if (xattr_may_create(flags)) + err = xattr_mkdir(xaroot->d_inode, xadir, 0700); + if (err) { + dput(xadir); + xadir = ERR_PTR(err); + } + } + + mutex_unlock(&xaroot->d_inode->i_mutex); dput(xaroot); return xadir; - } /* The following are side effects of other operations that aren't explicitly @@ -986,19 +990,33 @@ int reiserfs_lookup_privroot(struct super_block *s) int reiserfs_xattr_init(struct super_block *s, int mount_flags) { int err = 0; + struct dentry *privroot = REISERFS_SB(s)->priv_root; #ifdef CONFIG_REISERFS_FS_XATTR err = xattr_mount_check(s); if (err) goto error; - if (!REISERFS_SB(s)->priv_root->d_inode && !(mount_flags & MS_RDONLY)) { + if (!privroot->d_inode && !(mount_flags & MS_RDONLY)) { mutex_lock(&s->s_root->d_inode->i_mutex); err = create_privroot(REISERFS_SB(s)->priv_root); mutex_unlock(&s->s_root->d_inode->i_mutex); } - if (!err) + + if (privroot->d_inode) { s->s_xattr = reiserfs_xattr_handlers; + mutex_lock(&privroot->d_inode->i_mutex); + if (!REISERFS_SB(s)->xattr_root) { + struct dentry *dentry; + dentry = lookup_one_len(XAROOT_NAME, privroot, + strlen(XAROOT_NAME)); + if (!IS_ERR(dentry)) + REISERFS_SB(s)->xattr_root = dentry; + else + err = PTR_ERR(dentry); + } + mutex_unlock(&privroot->d_inode->i_mutex); + } error: if (err) { @@ -1008,11 +1026,12 @@ error: #endif /* The super_block MS_POSIXACL must mirror the (no)acl mount option. */ - s->s_flags = s->s_flags & ~MS_POSIXACL; #ifdef CONFIG_REISERFS_FS_POSIX_ACL if (reiserfs_posixacl(s)) s->s_flags |= MS_POSIXACL; + else #endif + s->s_flags &= ~MS_POSIXACL; return err; } diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h index 6b361d23a499..8651640868a1 100644 --- a/include/linux/reiserfs_fs_sb.h +++ b/include/linux/reiserfs_fs_sb.h @@ -402,7 +402,7 @@ struct reiserfs_sb_info { int reserved_blocks; /* amount of blocks reserved for further allocations */ spinlock_t bitmap_lock; /* this lock on now only used to protect reserved_blocks variable */ struct dentry *priv_root; /* root of /.reiserfs_priv */ - struct dentry *xattr_root; /* root of /.reiserfs_priv/.xa */ + struct dentry *xattr_root; /* root of /.reiserfs_priv/xattrs */ int j_errno; #ifdef CONFIG_QUOTA char *s_qf_names[MAXQUOTAS]; diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h index fea1a8e65bef..cdedc01036e4 100644 --- a/include/linux/reiserfs_xattr.h +++ b/include/linux/reiserfs_xattr.h @@ -98,7 +98,7 @@ static inline size_t reiserfs_xattr_jcreate_nblocks(struct inode *inode) if ((REISERFS_I(inode)->i_flags & i_has_xattr_dir) == 0) { nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb); - if (REISERFS_SB(inode->i_sb)->xattr_root == NULL) + if (!REISERFS_SB(inode->i_sb)->xattr_root->d_inode) nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb); } From b82bb72ba7df473461c5e2368a4e7497c8ce76e9 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 5 May 2009 15:30:16 -0400 Subject: [PATCH 090/670] reiserfs: dont associate security.* with xattr files The security.* xattrs are ignored for xattr files, so don't create them. Signed-off-by: Jeff Mahoney Signed-off-by: Al Viro --- fs/reiserfs/xattr_security.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/xattr_security.c b/fs/reiserfs/xattr_security.c index 4d3c20e787c3..a92c8792c0f6 100644 --- a/fs/reiserfs/xattr_security.c +++ b/fs/reiserfs/xattr_security.c @@ -55,8 +55,16 @@ int reiserfs_security_init(struct inode *dir, struct inode *inode, struct reiserfs_security_handle *sec) { int blocks = 0; - int error = security_inode_init_security(inode, dir, &sec->name, - &sec->value, &sec->length); + int error; + + sec->name = NULL; + + /* Don't add selinux attributes on xattrs - they'll never get used */ + if (IS_PRIVATE(dir)) + return 0; + + error = security_inode_init_security(inode, dir, &sec->name, + &sec->value, &sec->length); if (error) { if (error == -EOPNOTSUPP) error = 0; From 677c9b2e393a0cd203bd54e9c18b012b2c73305a Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Tue, 5 May 2009 15:30:17 -0400 Subject: [PATCH 091/670] reiserfs: remove privroot hiding in lookup With Al Viro's patch to move privroot lookup to fs mount, there's no need to have special code to hide the privroot in reiserfs_lookup. I've also cleaned up the privroot hiding in reiserfs_readdir_dentry and removed the last user of reiserfs_xattrs(). Signed-off-by: Jeff Mahoney Signed-off-by: Al Viro --- fs/reiserfs/dir.c | 24 +++++++++++++----------- fs/reiserfs/namei.c | 17 ++--------------- fs/reiserfs/xattr.c | 2 +- include/linux/reiserfs_fs_sb.h | 1 - 4 files changed, 16 insertions(+), 28 deletions(-) diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c index 67a80d7e59e2..45ee3d357c70 100644 --- a/fs/reiserfs/dir.c +++ b/fs/reiserfs/dir.c @@ -41,6 +41,18 @@ static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry, #define store_ih(where,what) copy_item_head (where, what) +static inline bool is_privroot_deh(struct dentry *dir, + struct reiserfs_de_head *deh) +{ + int ret = 0; +#ifdef CONFIG_REISERFS_FS_XATTR + struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root; + ret = (dir == dir->d_parent && privroot->d_inode && + deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid); +#endif + return ret; +} + int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent, filldir_t filldir, loff_t *pos) { @@ -138,18 +150,8 @@ int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent, } /* Ignore the .reiserfs_priv entry */ - if (reiserfs_xattrs(inode->i_sb) && - !old_format_only(inode->i_sb) && - dentry == inode->i_sb->s_root && - REISERFS_SB(inode->i_sb)->priv_root && - REISERFS_SB(inode->i_sb)->priv_root->d_inode - && deh_objectid(deh) == - le32_to_cpu(INODE_PKEY - (REISERFS_SB(inode->i_sb)-> - priv_root->d_inode)-> - k_objectid)) { + if (is_privroot_deh(dentry, deh)) continue; - } d_off = deh_offset(deh); *pos = d_off; diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c index efd4d720718e..271579128634 100644 --- a/fs/reiserfs/namei.c +++ b/fs/reiserfs/namei.c @@ -338,21 +338,8 @@ static struct dentry *reiserfs_lookup(struct inode *dir, struct dentry *dentry, &path_to_entry, &de); pathrelse(&path_to_entry); if (retval == NAME_FOUND) { - /* Hide the .reiserfs_priv directory */ - if (reiserfs_xattrs(dir->i_sb) && - !old_format_only(dir->i_sb) && - REISERFS_SB(dir->i_sb)->priv_root && - REISERFS_SB(dir->i_sb)->priv_root->d_inode && - de.de_objectid == - le32_to_cpu(INODE_PKEY - (REISERFS_SB(dir->i_sb)->priv_root->d_inode)-> - k_objectid)) { - reiserfs_write_unlock(dir->i_sb); - return ERR_PTR(-EACCES); - } - - inode = - reiserfs_iget(dir->i_sb, (struct cpu_key *)&(de.de_dir_id)); + inode = reiserfs_iget(dir->i_sb, + (struct cpu_key *)&(de.de_dir_id)); if (!inode || IS_ERR(inode)) { reiserfs_write_unlock(dir->i_sb); return ERR_PTR(-EACCES); diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index c77984473db9..2237e10c7c7c 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -841,7 +841,7 @@ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size) if (!dentry->d_inode) return -EINVAL; - if (!reiserfs_xattrs(dentry->d_sb) || + if (!dentry->d_sb->s_xattr || get_inode_sd_version(dentry->d_inode) == STAT_DATA_V1) return -EOPNOTSUPP; diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h index 8651640868a1..6473650c28f1 100644 --- a/include/linux/reiserfs_fs_sb.h +++ b/include/linux/reiserfs_fs_sb.h @@ -488,7 +488,6 @@ enum reiserfs_mount_options { #define reiserfs_data_log(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_LOG)) #define reiserfs_data_ordered(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_ORDERED)) #define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK)) -#define reiserfs_xattrs(s) ((s)->s_xattr != NULL) #define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER)) #define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL)) #define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s)) From 74dbbdd7fdc11763f4698d2f3e684cf4446951e6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 6 May 2009 01:07:50 -0400 Subject: [PATCH 092/670] New helper: deactivate_locked_super() Does equivalent of up_write(&s->s_umount); deactivate_super(s); However, it does not does not unlock it until it's all over. As the result, it's safe to use to dispose of new superblock on ->get_sb() failure exits - nobody will see the sucker until it's all over. Equivalent using up_write/deactivate_super is safe for that purpose if superblock is either safe to use or has NULL ->s_root when we unlock. Normally filesystems take the required precautions, but a) we do have bugs in that area in some of them. b) up_write/deactivate_super sequence is extremely common, so the helper makes sense anyway. Signed-off-by: Al Viro --- fs/super.c | 46 ++++++++++++++++++++++++++++++++++------------ include/linux/fs.h | 1 + 2 files changed, 35 insertions(+), 12 deletions(-) diff --git a/fs/super.c b/fs/super.c index 786fe7d72790..a9dc4c33ef4d 100644 --- a/fs/super.c +++ b/fs/super.c @@ -207,6 +207,34 @@ void deactivate_super(struct super_block *s) EXPORT_SYMBOL(deactivate_super); +/** + * deactivate_locked_super - drop an active reference to superblock + * @s: superblock to deactivate + * + * Equivalent of up_write(&s->s_umount); deactivate_super(s);, except that + * it does not unlock it until it's all over. As the result, it's safe to + * use to dispose of new superblock on ->get_sb() failure exits - nobody + * will see the sucker until it's all over. Equivalent using up_write + + * deactivate_super is safe for that purpose only if superblock is either + * safe to use or has NULL ->s_root when we unlock. + */ +void deactivate_locked_super(struct super_block *s) +{ + struct file_system_type *fs = s->s_type; + if (atomic_dec_and_lock(&s->s_active, &sb_lock)) { + s->s_count -= S_BIAS-1; + spin_unlock(&sb_lock); + vfs_dq_off(s, 0); + fs->kill_sb(s); + put_filesystem(fs); + put_super(s); + } else { + up_write(&s->s_umount); + } +} + +EXPORT_SYMBOL(deactivate_locked_super); + /** * grab_super - acquire an active reference * @s: reference we are trying to make active @@ -797,8 +825,7 @@ int get_sb_ns(struct file_system_type *fs_type, int flags, void *data, sb->s_flags = flags; err = fill_super(sb, data, flags & MS_SILENT ? 1 : 0); if (err) { - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); return err; } @@ -854,8 +881,7 @@ int get_sb_bdev(struct file_system_type *fs_type, if (s->s_root) { if ((flags ^ s->s_flags) & MS_RDONLY) { - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); error = -EBUSY; goto error_bdev; } @@ -870,8 +896,7 @@ int get_sb_bdev(struct file_system_type *fs_type, sb_set_blocksize(s, block_size(bdev)); error = fill_super(s, data, flags & MS_SILENT ? 1 : 0); if (error) { - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); goto error; } @@ -921,8 +946,7 @@ int get_sb_nodev(struct file_system_type *fs_type, error = fill_super(s, data, flags & MS_SILENT ? 1 : 0); if (error) { - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); return error; } s->s_flags |= MS_ACTIVE; @@ -952,8 +976,7 @@ int get_sb_single(struct file_system_type *fs_type, s->s_flags = flags; error = fill_super(s, data, flags & MS_SILENT ? 1 : 0); if (error) { - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); return error; } s->s_flags |= MS_ACTIVE; @@ -1006,8 +1029,7 @@ vfs_kern_mount(struct file_system_type *type, int flags, const char *name, void return mnt; out_sb: dput(mnt->mnt_root); - up_write(&mnt->mnt_sb->s_umount); - deactivate_super(mnt->mnt_sb); + deactivate_locked_super(mnt->mnt_sb); out_free_secdata: free_secdata(secdata); out_mnt: diff --git a/include/linux/fs.h b/include/linux/fs.h index 5bed436f4353..11484d08042c 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1775,6 +1775,7 @@ void kill_block_super(struct super_block *sb); void kill_anon_super(struct super_block *sb); void kill_litter_super(struct super_block *sb); void deactivate_super(struct super_block *sb); +void deactivate_locked_super(struct super_block *sb); int set_anon_super(struct super_block *s, void *data); struct super_block *sget(struct file_system_type *type, int (*test)(struct super_block *,void *), From 6f5bbff9a1b7d6864a495763448a363bbfa96324 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 6 May 2009 01:34:22 -0400 Subject: [PATCH 093/670] Convert obvious places to deactivate_locked_super() Signed-off-by: Al Viro --- drivers/mtd/mtdsuper.c | 3 +-- fs/9p/vfs_super.c | 5 +---- fs/afs/super.c | 3 +-- fs/btrfs/super.c | 12 ++++-------- fs/cifs/cifsfs.c | 3 +-- fs/devpts/inode.c | 5 ++--- fs/ecryptfs/main.c | 5 ++--- fs/libfs.c | 3 +-- fs/nfs/super.c | 15 +++++---------- fs/proc/root.c | 3 +-- fs/ubifs/super.c | 3 +-- kernel/cgroup.c | 3 +-- 12 files changed, 21 insertions(+), 42 deletions(-) diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c index 92285d0089c2..af8b42e0a55b 100644 --- a/drivers/mtd/mtdsuper.c +++ b/drivers/mtd/mtdsuper.c @@ -74,8 +74,7 @@ static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags, ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0); if (ret < 0) { - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); return ret; } diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 7d23214e5599..0d29a57c63e6 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -174,10 +174,7 @@ P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n"); return 0; release_sb: - if (sb) { - up_write(&sb->s_umount); - deactivate_super(sb); - } + deactivate_locked_super(sb); free_stat: kfree(st); diff --git a/fs/afs/super.c b/fs/afs/super.c index aee239a048cb..2753f16dd315 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -405,8 +405,7 @@ static int afs_get_sb(struct file_system_type *fs_type, sb->s_flags = flags; ret = afs_fill_super(sb, ¶ms); if (ret < 0) { - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); goto error; } sb->s_options = new_opts; diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 3536bdb2d7cb..6dfae5b28f59 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -502,8 +502,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags, if (s->s_root) { if ((flags ^ s->s_flags) & MS_RDONLY) { - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); error = -EBUSY; goto error_close_devices; } @@ -517,8 +516,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags, error = btrfs_fill_super(s, fs_devices, data, flags & MS_SILENT ? 1 : 0); if (error) { - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); goto error_free_subvol_name; } @@ -535,15 +533,13 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags, mutex_unlock(&s->s_root->d_inode->i_mutex); if (IS_ERR(root)) { - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); error = PTR_ERR(root); goto error_free_subvol_name; } if (!root->d_inode) { dput(root); - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); error = -ENXIO; goto error_free_subvol_name; } diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 355e0efec0cf..5e6d35804d73 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -602,8 +602,7 @@ cifs_get_sb(struct file_system_type *fs_type, rc = cifs_read_super(sb, data, dev_name, flags & MS_SILENT ? 1 : 0); if (rc) { - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); return rc; } sb->s_flags |= MS_ACTIVE; diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index 63a4a59e4148..21165cf934ff 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -389,11 +389,10 @@ static int devpts_get_sb(struct file_system_type *fs_type, return 0; out_dput: - dput(s->s_root); + dput(s->s_root); /* undo dget() in simple_set_mnt() */ out_undo_sget: - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); return error; } diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index ccabd5faa04d..9f0aa9883c28 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -614,9 +614,8 @@ static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags, } goto out; out_abort: - dput(sb->s_root); - up_write(&sb->s_umount); - deactivate_super(sb); + dput(sb->s_root); /* aka mnt->mnt_root, as set by get_sb_nodev() */ + deactivate_locked_super(sb); out: return rc; } diff --git a/fs/libfs.c b/fs/libfs.c index cd223190c4e9..80046ddf5063 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -246,8 +246,7 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name, return 0; Enomem: - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); return -ENOMEM; } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 1679a164c8c9..d2d67781c579 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2111,8 +2111,7 @@ out_err_nosb: error_splat_root: dput(mntroot); error_splat_super: - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); goto out; } @@ -2208,8 +2207,7 @@ out_err_noserver: return error; error_splat_super: - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); dprintk("<-- nfs_xdev_get_sb() = %d [splat]\n", error); return error; } @@ -2469,8 +2467,7 @@ out_free: error_splat_root: dput(mntroot); error_splat_super: - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); goto out; } @@ -2564,8 +2561,7 @@ out_err_noserver: return error; error_splat_super: - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); dprintk("<-- nfs4_xdev_get_sb() = %d [splat]\n", error); return error; } @@ -2649,8 +2645,7 @@ out_err_noserver: return error; error_splat_super: - up_write(&s->s_umount); - deactivate_super(s); + deactivate_locked_super(s); dprintk("<-- nfs4_referral_get_sb() = %d [splat]\n", error); return error; } diff --git a/fs/proc/root.c b/fs/proc/root.c index 1e15a2b176e8..b080b791d9e3 100644 --- a/fs/proc/root.c +++ b/fs/proc/root.c @@ -67,8 +67,7 @@ static int proc_get_sb(struct file_system_type *fs_type, sb->s_flags = flags; err = proc_fill_super(sb); if (err) { - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); return err; } diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index faa44f90608a..e9f7a754c4f7 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -2055,8 +2055,7 @@ static int ubifs_get_sb(struct file_system_type *fs_type, int flags, return 0; out_deact: - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); out_close: ubi_close_volume(ubi); return err; diff --git a/kernel/cgroup.c b/kernel/cgroup.c index 382109b5baeb..a7267bfd3765 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1133,8 +1133,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type, free_cg_links: free_cg_links(&tmp_cg_links); drop_new_super: - up_write(&sb->s_umount); - deactivate_super(sb); + deactivate_locked_super(sb); return ret; } From c96f58573778ddf96ff67108a635f3f642ea63d3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 6 May 2009 01:35:04 -0400 Subject: [PATCH 094/670] Fix a leak in failure exit in 9p ->get_sb() Signed-off-by: Al Viro --- fs/9p/vfs_super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 0d29a57c63e6..ab5547ff29a1 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -156,6 +156,7 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags, root = d_alloc_root(inode); if (!root) { + iput(inode); retval = -ENOMEM; goto release_sb; } From 265e771e8197cdb22a1e2556663173fb62c9cd91 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 6 May 2009 01:36:04 -0400 Subject: [PATCH 095/670] Fix deadlock in ipathfs ->get_sb() forgot to unlock superblock before calling deactivate_super()... Signed-off-by: Al Viro --- drivers/infiniband/hw/ipath/ipath_fs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c index 8dc2bb781605..b3684060465e 100644 --- a/drivers/infiniband/hw/ipath/ipath_fs.c +++ b/drivers/infiniband/hw/ipath/ipath_fs.c @@ -347,7 +347,7 @@ static int ipathfs_fill_super(struct super_block *sb, void *data, spin_unlock_irqrestore(&ipath_devs_lock, flags); ret = create_device_files(sb, dd); if (ret) { - deactivate_super(sb); + deactivate_locked_super(sb); goto bail; } spin_lock_irqsave(&ipath_devs_lock, flags); From a731d12d6ddd1e703770cacb5dfecb155b03ee06 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Mon, 6 Apr 2009 16:43:42 -0700 Subject: [PATCH 096/670] ocfs2: Use nd_set_link(). ocfs2 was hand-calling vfs_follow_link(), but there's no point to that. Let's use page_follow_link_light() and nd_set_link(). Signed-off-by: Joel Becker Signed-off-by: Al Viro --- fs/ocfs2/symlink.c | 77 ++++++++++++++++++++++------------------------ 1 file changed, 37 insertions(+), 40 deletions(-) diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c index ed0a0cfd68d2..579dd1b1110f 100644 --- a/fs/ocfs2/symlink.c +++ b/fs/ocfs2/symlink.c @@ -39,6 +39,7 @@ #include #include #include +#include #define MLOG_MASK_PREFIX ML_NAMEI #include @@ -54,26 +55,6 @@ #include "buffer_head_io.h" -static char *ocfs2_page_getlink(struct dentry * dentry, - struct page **ppage); -static char *ocfs2_fast_symlink_getlink(struct inode *inode, - struct buffer_head **bh); - -/* get the link contents into pagecache */ -static char *ocfs2_page_getlink(struct dentry * dentry, - struct page **ppage) -{ - struct page * page; - struct address_space *mapping = dentry->d_inode->i_mapping; - page = read_mapping_page(mapping, 0, NULL); - if (IS_ERR(page)) - goto sync_fail; - *ppage = page; - return kmap(page); - -sync_fail: - return (char*)page; -} static char *ocfs2_fast_symlink_getlink(struct inode *inode, struct buffer_head **bh) @@ -128,40 +109,55 @@ out: return ret; } -static void *ocfs2_follow_link(struct dentry *dentry, - struct nameidata *nd) +static void *ocfs2_fast_follow_link(struct dentry *dentry, + struct nameidata *nd) { - int status; - char *link; + int status = 0; + int len; + char *target, *link = ERR_PTR(-ENOMEM); struct inode *inode = dentry->d_inode; - struct page *page = NULL; struct buffer_head *bh = NULL; - - if (ocfs2_inode_is_fast_symlink(inode)) - link = ocfs2_fast_symlink_getlink(inode, &bh); - else - link = ocfs2_page_getlink(dentry, &page); - if (IS_ERR(link)) { - status = PTR_ERR(link); + + mlog_entry_void(); + + BUG_ON(!ocfs2_inode_is_fast_symlink(inode)); + target = ocfs2_fast_symlink_getlink(inode, &bh); + if (IS_ERR(target)) { + status = PTR_ERR(target); mlog_errno(status); goto bail; } - status = vfs_follow_link(nd, link); + /* Fast symlinks can't be large */ + len = strlen(target); + link = kzalloc(len + 1, GFP_NOFS); + if (!link) { + status = -ENOMEM; + mlog_errno(status); + goto bail; + } + + memcpy(link, target, len); + nd_set_link(nd, link); bail: - if (page) { - kunmap(page); - page_cache_release(page); - } brelse(bh); - return ERR_PTR(status); + mlog_exit(status); + return status ? ERR_PTR(status) : link; +} + +static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie) +{ + char *link = cookie; + + kfree(link); } const struct inode_operations ocfs2_symlink_inode_operations = { .readlink = page_readlink, - .follow_link = ocfs2_follow_link, + .follow_link = page_follow_link_light, + .put_link = page_put_link, .getattr = ocfs2_getattr, .setattr = ocfs2_setattr, .setxattr = generic_setxattr, @@ -171,7 +167,8 @@ const struct inode_operations ocfs2_symlink_inode_operations = { }; const struct inode_operations ocfs2_fast_symlink_inode_operations = { .readlink = ocfs2_readlink, - .follow_link = ocfs2_follow_link, + .follow_link = ocfs2_fast_follow_link, + .put_link = ocfs2_fast_put_link, .getattr = ocfs2_getattr, .setattr = ocfs2_setattr, .setxattr = generic_setxattr, From c490d79bb70c549e096099576b1df40a8810b0d8 Mon Sep 17 00:00:00 2001 From: "npiggin@suse.de" Date: Sun, 26 Apr 2009 20:25:53 +1000 Subject: [PATCH 097/670] fs: dcache fix LRU ordering Fix ordering of LRU when moving referenced dentries to the head of the list (they should go to the head of the list in the same order as they were found from the tail, rather than reverse order). Signed-off-by: Nick Piggin Signed-off-by: Al Viro --- fs/dcache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/dcache.c b/fs/dcache.c index 1fcffebfb44f..75659a6fd1f8 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -481,7 +481,7 @@ restart: if ((flags & DCACHE_REFERENCED) && (dentry->d_flags & DCACHE_REFERENCED)) { dentry->d_flags &= ~DCACHE_REFERENCED; - list_move_tail(&dentry->d_lru, &referenced); + list_move(&dentry->d_lru, &referenced); spin_unlock(&dentry->d_lock); } else { list_move_tail(&dentry->d_lru, &tmp); From 774e33e70b2bffa8c602d22a5d27c0061a0039cc Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 26 Apr 2009 14:51:17 +0200 Subject: [PATCH 098/670] ROMFS: romfs_dev_read() error ignored romfs_dev_read() may return -EIO, but ret is unsigned, so the errorpath isn't taken. Signed-off-by: Roel Kluin Signed-off-by: Al Viro --- fs/romfs/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/romfs/super.c b/fs/romfs/super.c index c53b5ef8a02f..4ab3c03d8f95 100644 --- a/fs/romfs/super.c +++ b/fs/romfs/super.c @@ -298,7 +298,8 @@ static struct inode *romfs_iget(struct super_block *sb, unsigned long pos) struct romfs_inode ri; struct inode *i; unsigned long nlen; - unsigned nextfh, ret; + unsigned nextfh; + int ret; umode_t mode; /* we might have to traverse a chain of "hard link" file entries to get From db6c1fbb92eeb4cb52c6133e0c533602f49fc4bd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Apr 2009 18:07:08 +0200 Subject: [PATCH 099/670] romfs: cleanup romfs_fs.h There's no kernel-only content in it anymore, so move it to header-y and remove the superflous #ifdef __KERNEL__. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/Kbuild | 2 +- include/linux/romfs_fs.h | 5 ----- 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index ca9b9b9bd331..3f0eaa397ef5 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -138,6 +138,7 @@ header-y += qnxtypes.h header-y += radeonfb.h header-y += raw.h header-y += resource.h +header-y += romfs_fs.h header-y += rose.h header-y += serial_reg.h header-y += smbno.h @@ -314,7 +315,6 @@ unifdef-y += irqnr.h unifdef-y += reboot.h unifdef-y += reiserfs_fs.h unifdef-y += reiserfs_xattr.h -unifdef-y += romfs_fs.h unifdef-y += route.h unifdef-y += rtc.h unifdef-y += rtnetlink.h diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h index e20bbf9eb365..c490fbc43fe2 100644 --- a/include/linux/romfs_fs.h +++ b/include/linux/romfs_fs.h @@ -53,9 +53,4 @@ struct romfs_inode { #define ROMFH_PAD (ROMFH_SIZE-1) #define ROMFH_MASK (~ROMFH_PAD) -#ifdef __KERNEL__ - -/* Not much now */ - -#endif /* __KERNEL__ */ #endif From ddbaaf3024d764ced700efb2d818709b90ea6fdd Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Wed, 29 Apr 2009 20:14:57 -0400 Subject: [PATCH 100/670] NULL noise in fs/super.c:kill_bdev_super() Signed-off-by: H Hartley Sweeten Cc: Subrata Modak Signed-off-by: Al Viro --- fs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/super.c b/fs/super.c index a9dc4c33ef4d..1943fdf655fa 100644 --- a/fs/super.c +++ b/fs/super.c @@ -922,7 +922,7 @@ void kill_block_super(struct super_block *sb) struct block_device *bdev = sb->s_bdev; fmode_t mode = sb->s_mode; - bdev->bd_super = 0; + bdev->bd_super = NULL; generic_shutdown_super(sb); sync_blockdev(bdev); close_bdev_exclusive(bdev, mode); From 6b3304b531704711286c3359b06922b83fdba015 Mon Sep 17 00:00:00 2001 From: Manish Katiyar Date: Tue, 31 Mar 2009 19:35:54 +0530 Subject: [PATCH 101/670] Make checkpatch.pl shut up on fs/inode.c Code Quality According To Mingo(tm) has been vastly improved, no code has been damaged^Wchanged^Wdamaged. [commit message rewritten -- AV] Signed-off-by: Manish Katiyar Signed-off-by: Al Viro --- fs/inode.c | 81 +++++++++++++++++++++++------------------------------- 1 file changed, 35 insertions(+), 46 deletions(-) diff --git a/fs/inode.c b/fs/inode.c index 6ad14a1cd8c9..0571983755dc 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -99,7 +99,7 @@ static DEFINE_MUTEX(iprune_mutex); */ struct inodes_stat_t inodes_stat; -static struct kmem_cache * inode_cachep __read_mostly; +static struct kmem_cache *inode_cachep __read_mostly; static void wake_up_inode(struct inode *inode) { @@ -124,7 +124,7 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode) static struct inode_operations empty_iops; static const struct file_operations empty_fops; - struct address_space * const mapping = &inode->i_data; + struct address_space *const mapping = &inode->i_data; inode->i_sb = sb; inode->i_blkbits = sb->s_blocksize_bits; @@ -216,7 +216,7 @@ static struct inode *alloc_inode(struct super_block *sb) return NULL; } -void destroy_inode(struct inode *inode) +void destroy_inode(struct inode *inode) { BUG_ON(inode_has_buffers(inode)); security_inode_free(inode); @@ -252,12 +252,11 @@ void inode_init_once(struct inode *inode) mutex_init(&inode->inotify_mutex); #endif } - EXPORT_SYMBOL(inode_init_once); static void init_once(void *foo) { - struct inode * inode = (struct inode *) foo; + struct inode *inode = (struct inode *) foo; inode_init_once(inode); } @@ -265,7 +264,7 @@ static void init_once(void *foo) /* * inode_lock must be held */ -void __iget(struct inode * inode) +void __iget(struct inode *inode) { if (atomic_read(&inode->i_count)) { atomic_inc(&inode->i_count); @@ -289,7 +288,7 @@ void clear_inode(struct inode *inode) { might_sleep(); invalidate_inode_buffers(inode); - + BUG_ON(inode->i_data.nrpages); BUG_ON(!(inode->i_state & I_FREEING)); BUG_ON(inode->i_state & I_CLEAR); @@ -303,7 +302,6 @@ void clear_inode(struct inode *inode) cd_forget(inode); inode->i_state = I_CLEAR; } - EXPORT_SYMBOL(clear_inode); /* @@ -351,8 +349,8 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose) next = head->next; for (;;) { - struct list_head * tmp = next; - struct inode * inode; + struct list_head *tmp = next; + struct inode *inode; /* * We can reschedule here without worrying about the list's @@ -391,7 +389,7 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose) * fails because there are busy inodes then a non zero value is returned. * If the discard is successful all the inodes have been discarded. */ -int invalidate_inodes(struct super_block * sb) +int invalidate_inodes(struct super_block *sb) { int busy; LIST_HEAD(throw_away); @@ -407,7 +405,6 @@ int invalidate_inodes(struct super_block * sb) return busy; } - EXPORT_SYMBOL(invalidate_inodes); static int can_unuse(struct inode *inode) @@ -504,7 +501,7 @@ static int shrink_icache_memory(int nr, gfp_t gfp_mask) * Nasty deadlock avoidance. We may hold various FS locks, * and we don't want to recurse into the FS that called us * in clear_inode() and friends.. - */ + */ if (!(gfp_mask & __GFP_FS)) return -1; prune_icache(nr); @@ -524,10 +521,13 @@ static void __wait_on_freeing_inode(struct inode *inode); * by hand after calling find_inode now! This simplifies iunique and won't * add any additional branch in the common code. */ -static struct inode * find_inode(struct super_block * sb, struct hlist_head *head, int (*test)(struct inode *, void *), void *data) +static struct inode *find_inode(struct super_block *sb, + struct hlist_head *head, + int (*test)(struct inode *, void *), + void *data) { struct hlist_node *node; - struct inode * inode = NULL; + struct inode *inode = NULL; repeat: hlist_for_each_entry(inode, node, head, i_hash) { @@ -548,10 +548,11 @@ repeat: * find_inode_fast is the fast path version of find_inode, see the comment at * iget_locked for details. */ -static struct inode * find_inode_fast(struct super_block * sb, struct hlist_head *head, unsigned long ino) +static struct inode *find_inode_fast(struct super_block *sb, + struct hlist_head *head, unsigned long ino) { struct hlist_node *node; - struct inode * inode = NULL; + struct inode *inode = NULL; repeat: hlist_for_each_entry(inode, node, head, i_hash) { @@ -631,10 +632,10 @@ struct inode *new_inode(struct super_block *sb) * here to attempt to avoid that. */ static unsigned int last_ino; - struct inode * inode; + struct inode *inode; spin_lock_prefetch(&inode_lock); - + inode = alloc_inode(sb); if (inode) { spin_lock(&inode_lock); @@ -645,7 +646,6 @@ struct inode *new_inode(struct super_block *sb) } return inode; } - EXPORT_SYMBOL(new_inode); void unlock_new_inode(struct inode *inode) @@ -674,7 +674,6 @@ void unlock_new_inode(struct inode *inode) inode->i_state &= ~(I_LOCK|I_NEW); wake_up_inode(inode); } - EXPORT_SYMBOL(unlock_new_inode); /* @@ -683,13 +682,17 @@ EXPORT_SYMBOL(unlock_new_inode); * We no longer cache the sb_flags in i_flags - see fs.h * -- rmk@arm.uk.linux.org */ -static struct inode * get_new_inode(struct super_block *sb, struct hlist_head *head, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *data) +static struct inode *get_new_inode(struct super_block *sb, + struct hlist_head *head, + int (*test)(struct inode *, void *), + int (*set)(struct inode *, void *), + void *data) { - struct inode * inode; + struct inode *inode; inode = alloc_inode(sb); if (inode) { - struct inode * old; + struct inode *old; spin_lock(&inode_lock); /* We released the lock, so.. */ @@ -731,13 +734,14 @@ set_failed: * get_new_inode_fast is the fast path version of get_new_inode, see the * comment at iget_locked for details. */ -static struct inode * get_new_inode_fast(struct super_block *sb, struct hlist_head *head, unsigned long ino) +static struct inode *get_new_inode_fast(struct super_block *sb, + struct hlist_head *head, unsigned long ino) { - struct inode * inode; + struct inode *inode; inode = alloc_inode(sb); if (inode) { - struct inode * old; + struct inode *old; spin_lock(&inode_lock); /* We released the lock, so.. */ @@ -823,7 +827,6 @@ struct inode *igrab(struct inode *inode) spin_unlock(&inode_lock); return inode; } - EXPORT_SYMBOL(igrab); /** @@ -924,7 +927,6 @@ struct inode *ilookup5_nowait(struct super_block *sb, unsigned long hashval, return ifind(sb, head, test, data, 0); } - EXPORT_SYMBOL(ilookup5_nowait); /** @@ -953,7 +955,6 @@ struct inode *ilookup5(struct super_block *sb, unsigned long hashval, return ifind(sb, head, test, data, 1); } - EXPORT_SYMBOL(ilookup5); /** @@ -976,7 +977,6 @@ struct inode *ilookup(struct super_block *sb, unsigned long ino) return ifind_fast(sb, head, ino); } - EXPORT_SYMBOL(ilookup); /** @@ -1015,7 +1015,6 @@ struct inode *iget5_locked(struct super_block *sb, unsigned long hashval, */ return get_new_inode(sb, head, test, set, data); } - EXPORT_SYMBOL(iget5_locked); /** @@ -1047,7 +1046,6 @@ struct inode *iget_locked(struct super_block *sb, unsigned long ino) */ return get_new_inode_fast(sb, head, ino); } - EXPORT_SYMBOL(iget_locked); int insert_inode_locked(struct inode *inode) @@ -1076,7 +1074,6 @@ int insert_inode_locked(struct inode *inode) iput(old); } } - EXPORT_SYMBOL(insert_inode_locked); int insert_inode_locked4(struct inode *inode, unsigned long hashval, @@ -1106,7 +1103,6 @@ int insert_inode_locked4(struct inode *inode, unsigned long hashval, iput(old); } } - EXPORT_SYMBOL(insert_inode_locked4); /** @@ -1124,7 +1120,6 @@ void __insert_inode_hash(struct inode *inode, unsigned long hashval) hlist_add_head(&inode->i_hash, head); spin_unlock(&inode_lock); } - EXPORT_SYMBOL(__insert_inode_hash); /** @@ -1139,7 +1134,6 @@ void remove_inode_hash(struct inode *inode) hlist_del_init(&inode->i_hash); spin_unlock(&inode_lock); } - EXPORT_SYMBOL(remove_inode_hash); /* @@ -1187,7 +1181,6 @@ void generic_delete_inode(struct inode *inode) BUG_ON(inode->i_state != I_CLEAR); destroy_inode(inode); } - EXPORT_SYMBOL(generic_delete_inode); static void generic_forget_inode(struct inode *inode) @@ -1237,12 +1230,11 @@ void generic_drop_inode(struct inode *inode) else generic_forget_inode(inode); } - EXPORT_SYMBOL_GPL(generic_drop_inode); /* * Called when we're dropping the last reference - * to an inode. + * to an inode. * * Call the FS "drop()" function, defaulting to * the legacy UNIX filesystem behaviour.. @@ -1262,7 +1254,7 @@ static inline void iput_final(struct inode *inode) } /** - * iput - put an inode + * iput - put an inode * @inode: inode to put * * Puts an inode, dropping its usage count. If the inode use count hits @@ -1279,7 +1271,6 @@ void iput(struct inode *inode) iput_final(inode); } } - EXPORT_SYMBOL(iput); /** @@ -1290,10 +1281,10 @@ EXPORT_SYMBOL(iput); * Returns the block number on the device holding the inode that * is the disk block number for the block of the file requested. * That is, asked for block 4 of inode 1 the function will return the - * disk block relative to the disk start that holds that block of the + * disk block relative to the disk start that holds that block of the * file. */ -sector_t bmap(struct inode * inode, sector_t block) +sector_t bmap(struct inode *inode, sector_t block) { sector_t res = 0; if (inode->i_mapping->a_ops->bmap) @@ -1425,7 +1416,6 @@ void file_update_time(struct file *file) mark_inode_dirty_sync(inode); mnt_drop_write(file->f_path.mnt); } - EXPORT_SYMBOL(file_update_time); int inode_needs_sync(struct inode *inode) @@ -1436,7 +1426,6 @@ int inode_needs_sync(struct inode *inode) return 1; return 0; } - EXPORT_SYMBOL(inode_needs_sync); int inode_wait(void *word) From e24977d45f45d1675e050dc1a0aaf4bfc4ca9866 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 2 Apr 2009 21:17:03 -0400 Subject: [PATCH 102/670] Reduce path_lookup() abuses ... use kern_path() where possible [folded a fix from rdd] Signed-off-by: Al Viro --- drivers/scsi/osd/osd_uld.c | 20 ++++++++++---------- fs/gfs2/ops_fstype.c | 8 ++++---- security/tomoyo/common.c | 6 +++--- security/tomoyo/realpath.c | 16 ++++++++-------- 4 files changed, 25 insertions(+), 25 deletions(-) diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c index f644c9571eab..22b59e13ba83 100644 --- a/drivers/scsi/osd/osd_uld.c +++ b/drivers/scsi/osd/osd_uld.c @@ -173,26 +173,26 @@ static const struct file_operations osd_fops = { .unlocked_ioctl = osd_uld_ioctl, }; -struct osd_dev *osduld_path_lookup(const char *path) +struct osd_dev *osduld_path_lookup(const char *name) { - struct nameidata nd; + struct path path; struct inode *inode; struct cdev *cdev; struct osd_uld_device *uninitialized_var(oud); int error; - if (!path || !*path) { + if (!name || !*name) { OSD_ERR("Mount with !path || !*path\n"); return ERR_PTR(-EINVAL); } - error = path_lookup(path, LOOKUP_FOLLOW, &nd); + error = kern_path(name, LOOKUP_FOLLOW, &path); if (error) { - OSD_ERR("path_lookup of %s faild=>%d\n", path, error); + OSD_ERR("path_lookup of %s failed=>%d\n", name, error); return ERR_PTR(error); } - inode = nd.path.dentry->d_inode; + inode = path.dentry->d_inode; error = -EINVAL; /* Not the right device e.g osd_uld_device */ if (!S_ISCHR(inode->i_mode)) { OSD_DEBUG("!S_ISCHR()\n"); @@ -202,15 +202,15 @@ struct osd_dev *osduld_path_lookup(const char *path) cdev = inode->i_cdev; if (!cdev) { OSD_ERR("Before mounting an OSD Based filesystem\n"); - OSD_ERR(" user-mode must open+close the %s device\n", path); - OSD_ERR(" Example: bash: echo < %s\n", path); + OSD_ERR(" user-mode must open+close the %s device\n", name); + OSD_ERR(" Example: bash: echo < %s\n", name); goto out; } /* The Magic wand. Is it our char-dev */ /* TODO: Support sg devices */ if (cdev->owner != THIS_MODULE) { - OSD_ERR("Error mounting %s - is not an OSD device\n", path); + OSD_ERR("Error mounting %s - is not an OSD device\n", name); goto out; } @@ -220,7 +220,7 @@ struct osd_dev *osduld_path_lookup(const char *path) error = 0; out: - path_put(&nd.path); + path_put(&path); return error ? ERR_PTR(error) : &oud->od; } EXPORT_SYMBOL(osduld_path_lookup); diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 650a730707b7..1ff9473ea753 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -1282,21 +1282,21 @@ static int gfs2_get_sb(struct file_system_type *fs_type, int flags, static struct super_block *get_gfs2_sb(const char *dev_name) { struct super_block *sb; - struct nameidata nd; + struct path path; int error; - error = path_lookup(dev_name, LOOKUP_FOLLOW, &nd); + error = kern_path(dev_name, LOOKUP_FOLLOW, &path); if (error) { printk(KERN_WARNING "GFS2: path_lookup on %s returned error %d\n", dev_name, error); return NULL; } - sb = nd.path.dentry->d_inode->i_sb; + sb = path.dentry->d_inode->i_sb; if (sb && (sb->s_type == &gfs2_fs_type)) atomic_inc(&sb->s_active); else sb = NULL; - path_put(&nd.path); + path_put(&path); return sb; } diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c index d4d41b3efc7c..ddfb9cccf468 100644 --- a/security/tomoyo/common.c +++ b/security/tomoyo/common.c @@ -1720,14 +1720,14 @@ static bool tomoyo_policy_loader_exists(void) * policies are not loaded yet. * Thus, let do_execve() call this function everytime. */ - struct nameidata nd; + struct path path; - if (path_lookup(tomoyo_loader, LOOKUP_FOLLOW, &nd)) { + if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) { printk(KERN_INFO "Not activating Mandatory Access Control now " "since %s doesn't exist.\n", tomoyo_loader); return false; } - path_put(&nd.path); + path_put(&path); return true; } diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index bf8e2b451687..40927a84cb6e 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -165,11 +165,11 @@ char *tomoyo_realpath_from_path(struct path *path) */ char *tomoyo_realpath(const char *pathname) { - struct nameidata nd; + struct path path; - if (pathname && path_lookup(pathname, LOOKUP_FOLLOW, &nd) == 0) { - char *buf = tomoyo_realpath_from_path(&nd.path); - path_put(&nd.path); + if (pathname && kern_path(pathname, LOOKUP_FOLLOW, &path) == 0) { + char *buf = tomoyo_realpath_from_path(&path); + path_put(&path); return buf; } return NULL; @@ -184,11 +184,11 @@ char *tomoyo_realpath(const char *pathname) */ char *tomoyo_realpath_nofollow(const char *pathname) { - struct nameidata nd; + struct path path; - if (pathname && path_lookup(pathname, 0, &nd) == 0) { - char *buf = tomoyo_realpath_from_path(&nd.path); - path_put(&nd.path); + if (pathname && kern_path(pathname, 0, &path) == 0) { + char *buf = tomoyo_realpath_from_path(&path); + path_put(&path); return buf; } return NULL; From a44ddbb6d8a8ffe4e34e417048dfdd8f3dd1de4f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Apr 2009 09:38:49 -0400 Subject: [PATCH 103/670] Make open_exec() and sys_uselib() use may_open(), instead of duplicating its parts Signed-off-by: Al Viro --- fs/exec.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 639177b0eeac..41ae8e0de72d 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -126,11 +126,7 @@ SYSCALL_DEFINE1(uselib, const char __user *, library) if (nd.path.mnt->mnt_flags & MNT_NOEXEC) goto exit; - error = inode_permission(nd.path.dentry->d_inode, - MAY_READ | MAY_EXEC | MAY_OPEN); - if (error) - goto exit; - error = ima_path_check(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN); + error = may_open(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN, 0); if (error) goto exit; @@ -677,10 +673,7 @@ struct file *open_exec(const char *name) if (nd.path.mnt->mnt_flags & MNT_NOEXEC) goto out_path_put; - err = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_OPEN); - if (err) - goto out_path_put; - err = ima_path_check(&nd.path, MAY_EXEC | MAY_OPEN); + err = may_open(&nd.path, MAY_EXEC | MAY_OPEN, 0); if (err) goto out_path_put; From 6e8341a11eb21826b7192d0bb88cb5b44900a9af Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 6 Apr 2009 11:16:22 -0400 Subject: [PATCH 104/670] Switch open_exec() and sys_uselib() to do_open_filp() ... and make path_lookup_open() static Signed-off-by: Al Viro --- fs/exec.c | 76 +++++++++++++++---------------------------- fs/namei.c | 13 ++++---- fs/open.c | 2 +- include/linux/fs.h | 2 +- include/linux/namei.h | 1 - 5 files changed, 36 insertions(+), 58 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 41ae8e0de72d..895823d0149d 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -105,36 +105,28 @@ static inline void put_binfmt(struct linux_binfmt * fmt) SYSCALL_DEFINE1(uselib, const char __user *, library) { struct file *file; - struct nameidata nd; char *tmp = getname(library); int error = PTR_ERR(tmp); - if (!IS_ERR(tmp)) { - error = path_lookup_open(AT_FDCWD, tmp, - LOOKUP_FOLLOW, &nd, - FMODE_READ|FMODE_EXEC); - putname(tmp); - } - if (error) + if (IS_ERR(tmp)) goto out; - error = -EINVAL; - if (!S_ISREG(nd.path.dentry->d_inode->i_mode)) - goto exit; - - error = -EACCES; - if (nd.path.mnt->mnt_flags & MNT_NOEXEC) - goto exit; - - error = may_open(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN, 0); - if (error) - goto exit; - - file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE); + file = do_filp_open(AT_FDCWD, tmp, + O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0, + MAY_READ | MAY_EXEC | MAY_OPEN); + putname(tmp); error = PTR_ERR(file); if (IS_ERR(file)) goto out; + error = -EINVAL; + if (!S_ISREG(file->f_path.dentry->d_inode->i_mode)) + goto exit; + + error = -EACCES; + if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) + goto exit; + fsnotify_open(file->f_path.dentry); error = -ENOEXEC; @@ -156,13 +148,10 @@ SYSCALL_DEFINE1(uselib, const char __user *, library) } read_unlock(&binfmt_lock); } +exit: fput(file); out: return error; -exit: - release_open_intent(&nd); - path_put(&nd.path); - goto out; } #ifdef CONFIG_MMU @@ -657,44 +646,33 @@ EXPORT_SYMBOL(setup_arg_pages); struct file *open_exec(const char *name) { - struct nameidata nd; struct file *file; int err; - err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd, - FMODE_READ|FMODE_EXEC); - if (err) + file = do_filp_open(AT_FDCWD, name, + O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0, + MAY_EXEC | MAY_OPEN); + if (IS_ERR(file)) goto out; err = -EACCES; - if (!S_ISREG(nd.path.dentry->d_inode->i_mode)) - goto out_path_put; + if (!S_ISREG(file->f_path.dentry->d_inode->i_mode)) + goto exit; - if (nd.path.mnt->mnt_flags & MNT_NOEXEC) - goto out_path_put; - - err = may_open(&nd.path, MAY_EXEC | MAY_OPEN, 0); - if (err) - goto out_path_put; - - file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE); - if (IS_ERR(file)) - return file; + if (file->f_path.mnt->mnt_flags & MNT_NOEXEC) + goto exit; fsnotify_open(file->f_path.dentry); err = deny_write_access(file); - if (err) { - fput(file); - goto out; - } + if (err) + goto exit; +out: return file; - out_path_put: - release_open_intent(&nd); - path_put(&nd.path); - out: +exit: + fput(file); return ERR_PTR(err); } EXPORT_SYMBOL(open_exec); diff --git a/fs/namei.c b/fs/namei.c index 78f253cd2d4f..967c3db92724 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1130,8 +1130,8 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt, * @nd: pointer to nameidata * @open_flags: open intent flags */ -int path_lookup_open(int dfd, const char *name, unsigned int lookup_flags, - struct nameidata *nd, int open_flags) +static int path_lookup_open(int dfd, const char *name, + unsigned int lookup_flags, struct nameidata *nd, int open_flags) { struct file *filp = get_empty_filp(); int err; @@ -1637,18 +1637,19 @@ static int open_will_write_to_fs(int flag, struct inode *inode) * open_to_namei_flags() for more details. */ struct file *do_filp_open(int dfd, const char *pathname, - int open_flag, int mode) + int open_flag, int mode, int acc_mode) { struct file *filp; struct nameidata nd; - int acc_mode, error; + int error; struct path path; struct dentry *dir; int count = 0; int will_write; int flag = open_to_namei_flags(open_flag); - acc_mode = MAY_OPEN | ACC_MODE(flag); + if (!acc_mode) + acc_mode = MAY_OPEN | ACC_MODE(flag); /* O_TRUNC implies we need access checks for write permissions */ if (flag & O_TRUNC) @@ -1869,7 +1870,7 @@ do_link: */ struct file *filp_open(const char *filename, int flags, int mode) { - return do_filp_open(AT_FDCWD, filename, flags, mode); + return do_filp_open(AT_FDCWD, filename, flags, mode, 0); } EXPORT_SYMBOL(filp_open); diff --git a/fs/open.c b/fs/open.c index 377eb25b6abf..bdfbf03615a4 100644 --- a/fs/open.c +++ b/fs/open.c @@ -1033,7 +1033,7 @@ long do_sys_open(int dfd, const char __user *filename, int flags, int mode) if (!IS_ERR(tmp)) { fd = get_unused_fd_flags(flags); if (fd >= 0) { - struct file *f = do_filp_open(dfd, tmp, flags, mode); + struct file *f = do_filp_open(dfd, tmp, flags, mode, 0); if (IS_ERR(f)) { put_unused_fd(fd); fd = PTR_ERR(f); diff --git a/include/linux/fs.h b/include/linux/fs.h index 11484d08042c..ed788426f464 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2118,7 +2118,7 @@ extern struct file *create_write_pipe(int flags); extern void free_write_pipe(struct file *); extern struct file *do_filp_open(int dfd, const char *pathname, - int open_flag, int mode); + int open_flag, int mode, int acc_mode); extern int may_open(struct path *, int, int); extern int kernel_read(struct file *, unsigned long, char *, unsigned long); diff --git a/include/linux/namei.h b/include/linux/namei.h index fc2e03579877..518098fe63af 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -69,7 +69,6 @@ extern int path_lookup(const char *, unsigned, struct nameidata *); extern int vfs_path_lookup(struct dentry *, struct vfsmount *, const char *, unsigned int, struct nameidata *); -extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags); extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry, int (*open)(struct inode *, struct file *)); extern struct file *nameidata_to_filp(struct nameidata *nd, int flags); From f9dbd05bc97d1d4f17c2057612f6a8e4dbd039e0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 6 May 2009 19:56:21 -0400 Subject: [PATCH 105/670] switch ufs directories to ufs_sync_file() Signed-off-by: Al Viro --- fs/ufs/dir.c | 2 +- fs/ufs/file.c | 2 +- fs/ufs/ufs.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c index dbbbc4668769..6321b797061b 100644 --- a/fs/ufs/dir.c +++ b/fs/ufs/dir.c @@ -666,6 +666,6 @@ not_empty: const struct file_operations ufs_dir_operations = { .read = generic_read_dir, .readdir = ufs_readdir, - .fsync = file_fsync, + .fsync = ufs_sync_file, .llseek = generic_file_llseek, }; diff --git a/fs/ufs/file.c b/fs/ufs/file.c index 625ef17c6f83..2bd3a1615714 100644 --- a/fs/ufs/file.c +++ b/fs/ufs/file.c @@ -30,7 +30,7 @@ #include "ufs.h" -static int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync) +int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync) { struct inode *inode = dentry->d_inode; int err; diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h index 69b3427d7885..d0c4acd4f1f3 100644 --- a/fs/ufs/ufs.h +++ b/fs/ufs/ufs.h @@ -98,8 +98,8 @@ extern void ufs_set_link(struct inode *dir, struct ufs_dir_entry *de, /* file.c */ extern const struct inode_operations ufs_file_inode_operations; extern const struct file_operations ufs_file_operations; - extern const struct address_space_operations ufs_aops; +extern int ufs_sync_file(struct file *, struct dentry *, int); /* ialloc.c */ extern void ufs_free_inode (struct inode *inode); From 2a32cebd6cbcc43996c3e2d114fa32ba1e71192a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 May 2009 16:05:57 -0400 Subject: [PATCH 106/670] Fix races around the access to ->s_options Put generic_show_options read access to s_options under rcu_read_lock, split save_mount_options() into "we are setting it the first time" (uses in foo_fill_super()) and "we are relacing and freeing the old one", synchronize_rcu() before kfree() in the latter. Signed-off-by: Al Viro --- drivers/isdn/capi/capifs.c | 3 +-- fs/affs/super.c | 3 +-- fs/afs/super.c | 4 ++-- fs/hpfs/super.c | 3 +-- fs/namespace.c | 21 ++++++++++++++++++--- fs/reiserfs/super.c | 3 +-- include/linux/fs.h | 1 + 7 files changed, 25 insertions(+), 13 deletions(-) diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c index b129409925af..8f9f3b5a3e8c 100644 --- a/drivers/isdn/capi/capifs.c +++ b/drivers/isdn/capi/capifs.c @@ -75,8 +75,7 @@ static int capifs_remount(struct super_block *s, int *flags, char *data) } } - kfree(s->s_options); - s->s_options = new_opt; + replace_mount_options(s, new_opt); config.setuid = setuid; config.setgid = setgid; diff --git a/fs/affs/super.c b/fs/affs/super.c index 5ce695e707fe..63f5183f263b 100644 --- a/fs/affs/super.c +++ b/fs/affs/super.c @@ -507,8 +507,7 @@ affs_remount(struct super_block *sb, int *flags, char *data) kfree(new_opts); return -EINVAL; } - kfree(sb->s_options); - sb->s_options = new_opts; + replace_mount_options(sb, new_opts); sbi->s_flags = mount_flags; sbi->s_mode = mode; diff --git a/fs/afs/super.c b/fs/afs/super.c index 2753f16dd315..76828e5f8a39 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -408,17 +408,17 @@ static int afs_get_sb(struct file_system_type *fs_type, deactivate_locked_super(sb); goto error; } - sb->s_options = new_opts; + save_mount_options(sb, new_opts); sb->s_flags |= MS_ACTIVE; } else { _debug("reuse"); - kfree(new_opts); ASSERTCMP(sb->s_flags, &, MS_ACTIVE); } simple_set_mnt(mnt, sb); afs_put_volume(params.volume); afs_put_cell(params.cell); + kfree(new_opts); _leave(" = 0 [%p]", sb); return 0; diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c index fecf402d7b8a..fc77965be841 100644 --- a/fs/hpfs/super.c +++ b/fs/hpfs/super.c @@ -423,8 +423,7 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data) if (!(*flags & MS_RDONLY)) mark_dirty(s); - kfree(s->s_options); - s->s_options = new_opts; + replace_mount_options(s, new_opts); return 0; diff --git a/fs/namespace.c b/fs/namespace.c index 0d2003fb4377..134d494158d9 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -695,12 +695,16 @@ static inline void mangle(struct seq_file *m, const char *s) */ int generic_show_options(struct seq_file *m, struct vfsmount *mnt) { - const char *options = mnt->mnt_sb->s_options; + const char *options; + + rcu_read_lock(); + options = rcu_dereference(mnt->mnt_sb->s_options); if (options != NULL && options[0]) { seq_putc(m, ','); mangle(m, options); } + rcu_read_unlock(); return 0; } @@ -721,11 +725,22 @@ EXPORT_SYMBOL(generic_show_options); */ void save_mount_options(struct super_block *sb, char *options) { - kfree(sb->s_options); - sb->s_options = kstrdup(options, GFP_KERNEL); + BUG_ON(sb->s_options); + rcu_assign_pointer(sb->s_options, kstrdup(options, GFP_KERNEL)); } EXPORT_SYMBOL(save_mount_options); +void replace_mount_options(struct super_block *sb, char *options) +{ + char *old = sb->s_options; + rcu_assign_pointer(sb->s_options, options); + if (old) { + synchronize_rcu(); + kfree(old); + } +} +EXPORT_SYMBOL(replace_mount_options); + #ifdef CONFIG_PROC_FS /* iterator */ static void *m_start(struct seq_file *m, loff_t *pos) diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index d444fe0013a4..1215a4f50cd2 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -1316,8 +1316,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg) } out_ok: - kfree(s->s_options); - s->s_options = new_opts; + replace_mount_options(s, new_opts); return 0; out_err: diff --git a/include/linux/fs.h b/include/linux/fs.h index ed788426f464..3b534e527e09 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2368,6 +2368,7 @@ extern void file_update_time(struct file *file); extern int generic_show_options(struct seq_file *m, struct vfsmount *mnt); extern void save_mount_options(struct super_block *sb, char *options); +extern void replace_mount_options(struct super_block *sb, char *options); static inline ino_t parent_ino(struct dentry *dentry) { From b0c4f3222c7406f0aee9d52b7d604a1d36108463 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 8 May 2009 16:23:30 -0400 Subject: [PATCH 107/670] Fix the race between capifs remount and node creation we don't want to deal with half-updated config Signed-off-by: Al Viro --- drivers/isdn/capi/capifs.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c index 8f9f3b5a3e8c..bff72d81f263 100644 --- a/drivers/isdn/capi/capifs.c +++ b/drivers/isdn/capi/capifs.c @@ -75,14 +75,17 @@ static int capifs_remount(struct super_block *s, int *flags, char *data) } } - replace_mount_options(s, new_opt); + mutex_lock(&s->s_root->d_inode->i_mutex); + replace_mount_options(s, new_opt); config.setuid = setuid; config.setgid = setgid; config.uid = uid; config.gid = gid; config.mode = mode; + mutex_unlock(&s->s_root->d_inode->i_mutex); + return 0; } @@ -153,13 +156,16 @@ void capifs_new_ncci(unsigned int number, dev_t device) if (!inode) return; inode->i_ino = number+2; + + dentry = get_node(number); + + /* config contents is protected by root's i_mutex */ inode->i_uid = config.setuid ? config.uid : current_fsuid(); inode->i_gid = config.setgid ? config.gid : current_fsgid(); inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; init_special_inode(inode, S_IFCHR|config.mode, device); //inode->i_op = &capifs_file_inode_operations; - dentry = get_node(number); if (!IS_ERR(dentry) && !dentry->d_inode) d_instantiate(dentry, inode); mutex_unlock(&capifs_root->d_inode->i_mutex); From 9d34d1a20e8171be819a6c8c4de4eea6104d174e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 8 May 2009 11:49:11 +0000 Subject: [PATCH 108/670] bonding: fix panic if initialization fails If module initialisation failed (e.g. because the bonding sysfs entry cannot be created), kernel panics: IP: [] destroy_workqueue+0x2d/0x146 Call Trace: [] bond_destructor+0x28/0x78 [] netdev_run_todo+0x231/0x25a [] rtnl_unlock+0x9/0xb [] bonding_init+0x83e/0x84a Remove the calls to bond_work_cancel_all() and destroy_workqueue(); both are also called/scheduled via bond_free_all(). bond_destroy_sysfs is unecessary because the sysfs entry has not been created in the error case. Signed-off-by: Florian Westphal Signed-off-by: Jay Vosburgh Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2188a96fc090..74824028f85c 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5181,7 +5181,6 @@ static int __init bonding_init(void) { int i; int res; - struct bonding *bond; printk(KERN_INFO "%s", version); @@ -5212,13 +5211,6 @@ static int __init bonding_init(void) goto out; err: - list_for_each_entry(bond, &bond_dev_list, bond_list) { - bond_work_cancel_all(bond); - destroy_workqueue(bond->wq); - } - - bond_destroy_sysfs(); - rtnl_lock(); bond_free_all(); rtnl_unlock(); From cb1287a82281ab3ddb0768250a46603977075b91 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 17 Apr 2009 20:50:30 -0300 Subject: [PATCH 109/670] V4L/DVB (11575): uvcvideo: fix uvc resume failed Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should return packet counts allocated originally during uvc resume, instead of zero. This version uses round down to return packet counts on Linus' suggestions, or else may lead to buffer destructed if packet size is changed before calling uvc_alloc_urb_buffers() in this kind of case. Signed-off-by: Ming Lei Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index a95e17329c5b..6ce974d7362f 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video, /* Buffers are already allocated, bail out. */ if (video->urb_size) - return 0; + return video->urb_size / psize; /* Compute the number of packets. Bulk endpoints might transfer UVC * payloads accross multiple URBs. From 171f48e254339548a910867c7a77c4a4d16e7e16 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Apr 2009 21:03:34 -0300 Subject: [PATCH 110/670] V4L/DVB (11660): zoran: fix bug when enumerating format -1 If someone requests a format at fmt->index == (unsigned)-1 and the first format in the array doesn't have the requested type then num will still be -1 when it's compared to fmt->index and there will appear to be a match. Restructure the loop so this can't happen. It's simpler this way too. The unnecessary check for (unsigned)fmt->index < 0 found by Roel Kluin is removed this way too. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/zoran/zoran_driver.c | 26 +++++++++++------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 092333b1c34f..643cccaa1aab 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1863,22 +1863,20 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag) { - int num = -1, i; + unsigned int num, i; - for (i = 0; i < NUM_FORMATS; i++) { - if (zoran_formats[i].flags & flag) - num++; - if (num == fmt->index) - break; + for (num = i = 0; i < NUM_FORMATS; i++) { + if (zoran_formats[i].flags & flag && num++ == fmt->index) { + strncpy(fmt->description, zoran_formats[i].name, + sizeof(fmt->description) - 1); + /* fmt struct pre-zeroed, so adding '\0' not neeed */ + fmt->pixelformat = zoran_formats[i].fourcc; + if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + return 0; + } } - if (fmt->index < 0 /* late, but not too late */ || i == NUM_FORMATS) - return -EINVAL; - - strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1); - fmt->pixelformat = zoran_formats[i].fourcc; - if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED) - fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; - return 0; + return -EINVAL; } static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh, From 1175d6131f7a89c163227169325ca77a22b18cb2 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Apr 2009 21:03:34 -0300 Subject: [PATCH 111/670] V4L/DVB (11661): v4l2-ioctl: Check buffer types using g_fmt instead of try_fmt For a number of different ioctls, the v4l2-ioctl code checks that the passed buffer type is supported by the driver. It did this by checking that the driver defined a method for the try_fmt handler for that buffer type. However, try_fmt is optional and a driver might not provide it even though it does support that type. So use g_fmt instead, since that isn't optional. This should fix a problem with VBI capture with saa7146. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 88f10d6cbc92..feb420733027 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -544,39 +544,39 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: - if (ops->vidioc_try_fmt_vid_cap) + if (ops->vidioc_g_fmt_vid_cap) return 0; break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: - if (ops->vidioc_try_fmt_vid_overlay) + if (ops->vidioc_g_fmt_vid_overlay) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: - if (ops->vidioc_try_fmt_vid_out) + if (ops->vidioc_g_fmt_vid_out) return 0; break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - if (ops->vidioc_try_fmt_vid_out_overlay) + if (ops->vidioc_g_fmt_vid_out_overlay) return 0; break; case V4L2_BUF_TYPE_VBI_CAPTURE: - if (ops->vidioc_try_fmt_vbi_cap) + if (ops->vidioc_g_fmt_vbi_cap) return 0; break; case V4L2_BUF_TYPE_VBI_OUTPUT: - if (ops->vidioc_try_fmt_vbi_out) + if (ops->vidioc_g_fmt_vbi_out) return 0; break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: - if (ops->vidioc_try_fmt_sliced_vbi_cap) + if (ops->vidioc_g_fmt_sliced_vbi_cap) return 0; break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - if (ops->vidioc_try_fmt_sliced_vbi_out) + if (ops->vidioc_g_fmt_sliced_vbi_out) return 0; break; case V4L2_BUF_TYPE_PRIVATE: - if (ops->vidioc_try_fmt_type_private) + if (ops->vidioc_g_fmt_type_private) return 0; break; } From 7ecc0cf937e97b6116db09cd13c32467b34c164a Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Thu, 30 Apr 2009 21:03:34 -0300 Subject: [PATCH 112/670] V4L/DVB (11662): v4l2-ioctl: Clear buffer type specific trailing fields/padding Some ioctls have structs that are a different size depending on what type of buffer is being used. If the buffer type leaves a field unused or has padding space at the end, this space should be zeroed out. The problems with S_FMT and REQBUFS were original identified and patched by Marton Nemeth . Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/v4l2-ioctl.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index feb420733027..be64a502ea27 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -42,6 +42,12 @@ printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\ } while (0) +/* Zero out the end of the struct pointed to by p. Everthing after, but + * not including, the specified field is cleared. */ +#define CLEAR_AFTER_FIELD(p, field) \ + memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \ + 0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field)) + struct std_descr { v4l2_std_id std; const char *descr; @@ -782,44 +788,53 @@ static long __video_do_ioctl(struct file *file, switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.pix); v4l_print_pix_fmt(vfd, &f->fmt.pix); if (ops->vidioc_s_fmt_vid_cap) ret = ops->vidioc_s_fmt_vid_cap(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_s_fmt_vid_overlay) ret = ops->vidioc_s_fmt_vid_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.pix); v4l_print_pix_fmt(vfd, &f->fmt.pix); if (ops->vidioc_s_fmt_vid_out) ret = ops->vidioc_s_fmt_vid_out(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_s_fmt_vid_out_overlay) ret = ops->vidioc_s_fmt_vid_out_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_s_fmt_vbi_cap) ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_s_fmt_vbi_out) ret = ops->vidioc_s_fmt_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_s_fmt_sliced_vbi_cap) ret = ops->vidioc_s_fmt_sliced_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_s_fmt_sliced_vbi_out) ret = ops->vidioc_s_fmt_sliced_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_PRIVATE: + /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */ if (ops->vidioc_s_fmt_type_private) ret = ops->vidioc_s_fmt_type_private(file, fh, f); @@ -836,46 +851,55 @@ static long __video_do_ioctl(struct file *file, v4l2_type_names)); switch (f->type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.pix); if (ops->vidioc_try_fmt_vid_cap) ret = ops->vidioc_try_fmt_vid_cap(file, fh, f); if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; case V4L2_BUF_TYPE_VIDEO_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_try_fmt_vid_overlay) ret = ops->vidioc_try_fmt_vid_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.pix); if (ops->vidioc_try_fmt_vid_out) ret = ops->vidioc_try_fmt_vid_out(file, fh, f); if (!ret) v4l_print_pix_fmt(vfd, &f->fmt.pix); break; case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: + CLEAR_AFTER_FIELD(f, fmt.win); if (ops->vidioc_try_fmt_vid_out_overlay) ret = ops->vidioc_try_fmt_vid_out_overlay(file, fh, f); break; case V4L2_BUF_TYPE_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_try_fmt_vbi_cap) ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.vbi); if (ops->vidioc_try_fmt_vbi_out) ret = ops->vidioc_try_fmt_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_try_fmt_sliced_vbi_cap) ret = ops->vidioc_try_fmt_sliced_vbi_cap(file, fh, f); break; case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: + CLEAR_AFTER_FIELD(f, fmt.sliced); if (ops->vidioc_try_fmt_sliced_vbi_out) ret = ops->vidioc_try_fmt_sliced_vbi_out(file, fh, f); break; case V4L2_BUF_TYPE_PRIVATE: + /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */ if (ops->vidioc_try_fmt_type_private) ret = ops->vidioc_try_fmt_type_private(file, fh, f); @@ -898,6 +922,9 @@ static long __video_do_ioctl(struct file *file, if (ret) break; + if (p->type < V4L2_BUF_TYPE_PRIVATE) + CLEAR_AFTER_FIELD(p, memory); + ret = ops->vidioc_reqbufs(file, fh, p); dbgarg(cmd, "count=%d, type=%s, memory=%s\n", p->count, From 52c3d29cfa2fa02f525a01abf28abf48f49801bf Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Mon, 20 Apr 2009 22:42:00 -0300 Subject: [PATCH 113/670] V4L/DVB (11664): cx23885: Frontend wasn't locking on HVR-1500 The boards control struct wasn't updated when (presumably) all of the other drivers migrated from using scode_table to specifying the demod. Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx23885/cx23885-dvb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c index 0c49a98213c4..1dc070da8652 100644 --- a/drivers/media/video/cx23885/cx23885-dvb.c +++ b/drivers/media/video/cx23885/cx23885-dvb.c @@ -472,7 +472,7 @@ static int dvb_register(struct cx23885_tsport *port) static struct xc2028_ctrl ctl = { .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, - .scode_table = XC3028_FE_OREN538, + .demod = XC3028_FE_OREN538, }; fe = dvb_attach(xc2028_attach, From 34a7864db1bc6d9ceb466251957fccf90c7106f8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 2 May 2009 07:56:46 -0300 Subject: [PATCH 114/670] V4L/DVB (11668): ivtv: fix compiler warning. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-driver.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index b0195e8ee4d1..db2ac9a99acd 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -305,14 +305,17 @@ int ivtv_waitq(wait_queue_head_t *waitq) /* Generic utility functions */ int ivtv_msleep_timeout(unsigned int msecs, int intr) { - int ret; int timeout = msecs_to_jiffies(msecs); do { set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); timeout = schedule_timeout(timeout); - if (intr && (ret = signal_pending(current))) - return ret; + if (intr) { + int ret = signal_pending(current); + + if (ret) + return ret; + } } while (timeout); return 0; } From 7564f67d5b38eb814e67edd8ba0c70fd8eb475b6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 2 May 2009 08:12:36 -0300 Subject: [PATCH 115/670] V4L/DVB (11669): uvc: fix compile warning The 2.6.30 kernel generates this warning: uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function I guess some new warning flag must have been turned on since this warning didn't appear with older kernels (gcc version 4.3.1). It's also a bogus warning, but since this code didn't comply to the coding standard anyway I've modified it to 1) remove the warning and 2) conform to the coding standard. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 399412d7f020..507dc85646b2 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1726,14 +1726,17 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message) static int __uvc_resume(struct usb_interface *intf, int reset) { struct uvc_device *dev = usb_get_intfdata(intf); - int ret; uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n", intf->cur_altsetting->desc.bInterfaceNumber); if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { - if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0) - return ret; + if (reset) { + int ret = uvc_ctrl_resume_device(dev); + + if (ret < 0) + return ret; + } return uvc_status_resume(dev); } From ec105a42ac397366e05888ea96503ab3b57f79ad Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 2 May 2009 11:10:23 -0300 Subject: [PATCH 116/670] V4L/DVB (11674): ivtv: fix incorrect bit tests Found the coccinelle tool. Thanks-to: Julia Lawall Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ivtv/ivtv-ioctl.c | 5 +++-- drivers/media/video/ivtv/ivtv-irq.c | 2 +- drivers/media/video/ivtv/ivtv-yuv.c | 3 ++- drivers/media/video/ivtv/ivtvfb.c | 3 ++- 4 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 4a2d464f055e..c342a9fe983e 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -180,7 +180,7 @@ int ivtv_set_speed(struct ivtv *itv, int speed) /* Wait for any DMA to finish */ prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); - while (itv->i_flags & IVTV_F_I_DMA) { + while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) { got_sig = signal_pending(current); if (got_sig) break; @@ -1710,7 +1710,8 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg) we are waiting unlock first and later lock again. */ mutex_unlock(&itv->serialize_lock); prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE); - if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0) + if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) && + !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags)) schedule(); finish_wait(&itv->event_waitq, &wait); mutex_lock(&itv->serialize_lock); diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index 01c14d2b381a..cd9db0bf33bf 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -196,7 +196,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA bytes_needed, s->name); return -1; } - if (rc && !s->buffers_stolen && (s->s_flags & IVTV_F_S_APPL_IO)) { + if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) { IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name); IVTV_WARN("Cause: the application is not reading fast enough.\n"); } diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index 7912ed6b72ee..c0875378acc2 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1063,7 +1063,8 @@ static int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args) prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); /* if no UDMA is pending and no UDMA is in progress, then the DMA is finished */ - while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) { + while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) || + test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { /* don't interrupt if the DMA is in progress but break off a still pending DMA. */ got_sig = signal_pending(current); diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 66e6eb513076..fa6bb85cb4b0 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -298,7 +298,8 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv, prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE); /* if no UDMA is pending and no UDMA is in progress, then the DMA is finished */ - while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) { + while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) || + test_bit(IVTV_F_I_UDMA, &itv->i_flags)) { /* don't interrupt if the DMA is in progress but break off a still pending DMA. */ got_sig = signal_pending(current); From dc47b77897b33fca328bd4cd487224808b740ce3 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 2 May 2009 11:52:35 -0300 Subject: [PATCH 117/670] V4L/DVB (11675): ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB confusion V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have been used. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-sf16fmi.c | 2 +- drivers/media/radio/radio-sf16fmr2.c | 2 +- drivers/media/video/ivtv/ivtv-gpio.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c index 1dba8f0832a0..5cf6c45b91fe 100644 --- a/drivers/media/radio/radio-sf16fmi.c +++ b/drivers/media/radio/radio-sf16fmi.c @@ -153,7 +153,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000; v->rangelow = RSF16_MINFREQ / mult; v->rangehigh = RSF16_MAXFREQ / mult; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; v->capability = fmi->flags & V4L2_TUNER_CAP_LOW; v->audmode = V4L2_TUNER_MODE_STEREO; v->signal = fmi_getsigstr(fmi); diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c index c09ca8600ea1..935ff9bcdfcc 100644 --- a/drivers/media/radio/radio-sf16fmr2.c +++ b/drivers/media/radio/radio-sf16fmr2.c @@ -233,7 +233,7 @@ static int vidioc_g_tuner(struct file *file, void *priv, mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000; v->rangelow = RSF16_MINFREQ / mult; v->rangehigh = RSF16_MAXFREQ / mult; - v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW; v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO: V4L2_TUNER_MODE_MONO; diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c index ceb05bdcaf62..85ac707228e7 100644 --- a/drivers/media/video/ivtv/ivtv-gpio.c +++ b/drivers/media/video/ivtv/ivtv-gpio.c @@ -190,8 +190,8 @@ static int subdev_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) mask = itv->card->gpio_audio_detect.mask; if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask)) - vt->rxsubchans = V4L2_TUNER_MODE_STEREO | - V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2; + vt->rxsubchans = V4L2_TUNER_SUB_STEREO | + V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; else vt->rxsubchans = V4L2_TUNER_SUB_MONO; return 0; From e047a0f57dabd57957c9dab744a02da01d445b0a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 3 May 2009 04:58:04 -0300 Subject: [PATCH 118/670] V4L/DVB (11679): cafe_ccic: fix sensor detection Due to an uninitialized chip.ident field the chip identification failed. Thanks-to: Saeed Bishara Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 5f582726985d..e2d49cdb9d77 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -774,6 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam) ret = __cafe_cam_reset(cam); if (ret) goto out; + chip.ident == V4L2_IDENT_NONE; chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR; chip.match.addr = cam->sensor_addr; ret = sensor_call(cam, core, g_chip_ident, &chip); From 90c69f29cfc436b21a3181f8034f19f74543507a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Tue, 5 May 2009 08:08:38 -0300 Subject: [PATCH 119/670] V4L/DVB (11680): cafe_ccic: use = instead of == for setting a value at a var /home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init': /home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect Cc: Hans Verkuil Cc: saeed bishara Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cafe_ccic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index e2d49cdb9d77..c4d181dde1ca 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -774,7 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam) ret = __cafe_cam_reset(cam); if (ret) goto out; - chip.ident == V4L2_IDENT_NONE; + chip.ident = V4L2_IDENT_NONE; chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR; chip.match.addr = cam->sensor_addr; ret = sensor_call(cam, core, g_chip_ident, &chip); From 384943ec1bb462e410390ad8f108ff1474cd882d Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 8 May 2009 18:20:43 -0700 Subject: [PATCH 120/670] Bluetooth: Fix wrong module refcount when connection setup fails The module refcount is increased by hci_dev_hold() call in hci_conn_add() and decreased by hci_dev_put() call in del_conn(). In case the connection setup fails, hci_dev_put() is never called. Procedure to reproduce the issue: # hciconfig hci0 up # lsmod | grep btusb -> "used by" refcount = 1 # hcitool cc -> will get timeout # lsmod | grep btusb -> "used by" refcount = 2 # hciconfig hci0 down # lsmod | grep btusb -> "used by" refcount = 1 # rmmod btusb -> ERROR: Module btusb is in use The hci_dev_put() call got moved into del_conn() with the 2.6.25 kernel to fix an issue with hci_dev going away before hci_conn. However that change was wrong and introduced this problem. When calling hci_conn_del() it has to call hci_dev_put() after freeing the connection details. This handling should be fully symmetric. The execution of del_conn() is done in a work queue and needs it own calls to hci_dev_hold() and hci_dev_put() to ensure that the hci_dev stays until the connection cleanup has been finished. Based on a report by Bing Zhao Signed-off-by: Marcel Holtmann Tested-by: Bing Zhao --- net/bluetooth/hci_conn.c | 2 ++ net/bluetooth/hci_sysfs.c | 3 +++ 2 files changed, 5 insertions(+) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 61309b26f271..85a1c6be2db9 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -292,6 +292,8 @@ int hci_conn_del(struct hci_conn *conn) hci_conn_del_sysfs(conn); + hci_dev_put(hdev); + return 0; } diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index a05d45eb3ba1..4cc3624bd22d 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -99,6 +99,8 @@ static void add_conn(struct work_struct *work) BT_ERR("Failed to register connection device"); return; } + + hci_dev_hold(hdev); } /* @@ -134,6 +136,7 @@ static void del_conn(struct work_struct *work) device_del(&conn->dev); put_device(&conn->dev); + hci_dev_put(hdev); } From 1b0336bb36f88976f1210a65b62f6a3e9578ee7b Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 9 May 2009 12:04:08 -0700 Subject: [PATCH 121/670] Bluetooth: Don't use hci_acl_connect_cancel() for incoming connections The connection setup phase takes around 2 seconds or longer and in that time it is possible that the need for an ACL connection is no longer present. If that happens then, the connection attempt will be canceled. This only applies to outgoing connections, but currently it can also be triggered by incoming connection. Don't call hci_acl_connect_cancel() on incoming connection since these have to be either accepted or rejected in this state. Once they are successfully connected they need to be fully disconnected anyway. Also remove the wrong hci_acl_disconn() call for SCO and eSCO links since at this stage they can't be disconnected either, because the connection handle is still unknown. Based on a report by Johan Hedberg Signed-off-by: Marcel Holtmann Tested-by: Johan Hedberg --- net/bluetooth/hci_conn.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 85a1c6be2db9..fa47d5d84f5c 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -171,10 +171,8 @@ static void hci_conn_timeout(unsigned long arg) switch (conn->state) { case BT_CONNECT: case BT_CONNECT2: - if (conn->type == ACL_LINK) + if (conn->type == ACL_LINK && conn->out) hci_acl_connect_cancel(conn); - else - hci_acl_disconn(conn, 0x13); break; case BT_CONFIG: case BT_CONNECTED: From 3d7a9d1c7ee251a04095d43eec5a3f4ff3f710a8 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sat, 9 May 2009 12:09:21 -0700 Subject: [PATCH 122/670] Bluetooth: Don't trigger disconnect timeout for security mode 3 pairing A remote device in security mode 3 that tries to connect will require the pairing during the connection setup phase. The disconnect timeout is now triggered within 10 milliseconds and causes the pairing to fail. If a connection is not fully established and a PIN code request is received, don't trigger the disconnect timeout. The either successful or failing connection complete event will make sure that the timeout is triggered at the right time. The biggest problem with security mode 3 is that many Bluetooth 2.0 device and before use a temporary security mode 3 for dedicated bonding. Based on a report by Johan Hedberg Signed-off-by: Marcel Holtmann Tested-by: Johan Hedberg --- net/bluetooth/hci_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 4e7cb88e5da9..184ba0a88ec0 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1493,7 +1493,7 @@ static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff hci_dev_lock(hdev); conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr); - if (conn) { + if (conn && conn->state == BT_CONNECTED) { hci_conn_hold(conn); conn->disc_timeout = HCI_PAIRING_TIMEOUT; hci_conn_put(conn); From b74d446f1f337e3fe906169a3266cb65ffa4179e Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 9 May 2009 15:35:10 +0600 Subject: [PATCH 123/670] x86: Fix false positive section mismatch warnings in the apic code [ Impact: reduce kernel image size a bit, annotate away warnings ] Signed-off-by: Sam Ravnborg [ modified and tested it ] Signed-off-by: Rakib Mullick Cc: Marcin Slusarz LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/es7000_32.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 1c11b819f245..302947775575 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -254,7 +254,7 @@ static int parse_unisys_oem(char *oemptr) } #ifdef CONFIG_ACPI -static int find_unisys_acpi_oem_table(unsigned long *oem_addr) +static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) { struct acpi_table_header *header = NULL; struct es7000_oem_table *table; @@ -285,7 +285,7 @@ static int find_unisys_acpi_oem_table(unsigned long *oem_addr) return 0; } -static void unmap_unisys_acpi_oem_table(unsigned long oem_addr) +static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr) { if (!oem_addr) return; @@ -306,7 +306,7 @@ static int es7000_check_dsdt(void) static int es7000_acpi_ret; /* Hook from generic ACPI tables.c */ -static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { unsigned long oem_addr = 0; int check_dsdt; @@ -717,7 +717,7 @@ struct apic apic_es7000_cluster = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, }; -struct apic apic_es7000 = { +struct apic __refdata apic_es7000 = { .name = "es7000", .probe = probe_es7000, From 843382370ec614768ac13582405f93635cf3637c Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 5 May 2009 21:52:06 +0900 Subject: [PATCH 124/670] nilfs2: ensure to clear dirty state when deleting metadata file block This would fix the following failure during GC: nilfs_cpfile_delete_checkpoints: cannot delete block NILFS: GC failed during preparation: cannot delete checkpoints: err=-2 The problem was caused by a break in state consistency between page cache and btree; the above block was removed from the btree but the page buffering the block was remaining in the page cache in dirty state. This resolves the inconsistency by ensuring to clear dirty state of the page buffering the deleted block. Reported-by: David Arendt Signed-off-by: Ryusuke Konishi --- fs/nilfs2/mdt.c | 2 +- fs/nilfs2/page.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c index e1c6777931b7..bb78745a0e30 100644 --- a/fs/nilfs2/mdt.c +++ b/fs/nilfs2/mdt.c @@ -300,7 +300,7 @@ int nilfs_mdt_delete_block(struct inode *inode, unsigned long block) int err; err = nilfs_bmap_delete(ii->i_bmap, block); - if (likely(!err)) { + if (!err || err == -ENOENT) { nilfs_mdt_mark_dirty(inode); nilfs_mdt_forget_block(inode, block); } diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c index 1bfbba9c0e9a..a2692bbc7b50 100644 --- a/fs/nilfs2/page.c +++ b/fs/nilfs2/page.c @@ -128,7 +128,8 @@ void nilfs_forget_buffer(struct buffer_head *bh) lock_buffer(bh); clear_buffer_nilfs_volatile(bh); - if (test_clear_buffer_dirty(bh) && nilfs_page_buffers_clean(page)) + clear_buffer_dirty(bh); + if (nilfs_page_buffers_clean(page)) __nilfs_clear_page_dirty(page); clear_buffer_uptodate(bh); From 47eb6b9c8fa963c9f49967ad1d9d7ec947d15b68 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Thu, 30 Apr 2009 02:21:00 +0900 Subject: [PATCH 125/670] nilfs2: fix possible circular locking for get information ioctls This is one of two patches which are to correct possible circular locking between mm->mmap_sem and nilfs->ns_segctor_sem. The problem was detected by lockdep check as follows: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.30-rc3-nilfs-00002-g3552613 #6 ------------------------------------------------------- mmap/5418 is trying to acquire lock: (&nilfs->ns_segctor_sem){++++.+}, at: [] nilfs_transaction_begin+0xb6/0x10c [nilfs2] but task is already holding lock: (&mm->mmap_sem){++++++}, at: [] do_page_fault+0x1d8/0x30a which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mm->mmap_sem){++++++}: [] __lock_acquire+0x1066/0x13b0 [] lock_acquire+0xba/0xdd [] might_fault+0x68/0x88 [] copy_to_user+0x2c/0xfc [] nilfs_ioctl_wrap_copy+0x103/0x160 [nilfs2] [] nilfs_ioctl+0x30a/0x3b0 [nilfs2] [] vfs_ioctl+0x22/0x69 [] do_vfs_ioctl+0x460/0x499 [] sys_ioctl+0x40/0x5a [] sysenter_do_call+0x12/0x38 [] 0xffffffff -> #0 (&nilfs->ns_segctor_sem){++++.+}: [] __lock_acquire+0xdcc/0x13b0 [] lock_acquire+0xba/0xdd [] down_read+0x2a/0x3e [] nilfs_transaction_begin+0xb6/0x10c [nilfs2] [] nilfs_page_mkwrite+0xe7/0x154 [nilfs2] [] __do_fault+0x165/0x376 [] handle_mm_fault+0x287/0x5d1 [] do_page_fault+0x2fb/0x30a [] error_code+0x72/0x78 [] 0xffffffff other info that might help us debug this: 1 lock held by mmap/5418: #0: (&mm->mmap_sem){++++++}, at: [] do_page_fault+0x1d8/0x30a stack backtrace: Pid: 5418, comm: mmap Not tainted 2.6.30-rc3-nilfs-00002-g3552613 #6 Call Trace: [] ? printk+0xf/0x12 [] print_circular_bug_tail+0xaa/0xb5 [] __lock_acquire+0xdcc/0x13b0 [] ? nilfs_sufile_get_stat+0x1e/0x105 [nilfs2] [] ? up_read+0x16/0x2c [] ? nilfs_sufile_get_stat+0xfa/0x105 [nilfs2] [] lock_acquire+0xba/0xdd [] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2] [] down_read+0x2a/0x3e [] ? nilfs_transaction_begin+0xb6/0x10c [nilfs2] [] nilfs_transaction_begin+0xb6/0x10c [nilfs2] [] nilfs_page_mkwrite+0xe7/0x154 [nilfs2] [] __do_fault+0x165/0x376 [] handle_mm_fault+0x287/0x5d1 [] ? do_page_fault+0x1d8/0x30a [] ? down_read_trylock+0x39/0x43 [] do_page_fault+0x2fb/0x30a [] ? do_page_fault+0x0/0x30a [] error_code+0x72/0x78 [] ? do_page_fault+0x0/0x30a This makes the lock granularity of nilfs->ns_segctor_sem finer than that of the mmap semaphore for ioctl commands except nilfs_clean_segments(). The successive patch ("nilfs2: fix lock order reversal in nilfs_clean_segments ioctl") is required to fully resolve the problem. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/ioctl.c | 100 ++++++++++++++++++---------------------------- 1 file changed, 38 insertions(+), 62 deletions(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index be387c6b2d46..e3c693d37d69 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -147,29 +147,12 @@ static ssize_t nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags, void *buf, size_t size, size_t nmembs) { - return nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf, - nmembs); -} - -static int nilfs_ioctl_get_cpinfo(struct inode *inode, struct file *filp, - unsigned int cmd, void __user *argp) -{ - struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs; - struct nilfs_argv argv; int ret; - if (copy_from_user(&argv, argp, sizeof(argv))) - return -EFAULT; - down_read(&nilfs->ns_segctor_sem); - ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), - nilfs_ioctl_do_get_cpinfo); + ret = nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf, + nmembs); up_read(&nilfs->ns_segctor_sem); - if (ret < 0) - return ret; - - if (copy_to_user(argp, &argv, sizeof(argv))) - ret = -EFAULT; return ret; } @@ -195,28 +178,11 @@ static ssize_t nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags, void *buf, size_t size, size_t nmembs) { - return nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs); -} - -static int nilfs_ioctl_get_suinfo(struct inode *inode, struct file *filp, - unsigned int cmd, void __user *argp) -{ - struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs; - struct nilfs_argv argv; int ret; - if (copy_from_user(&argv, argp, sizeof(argv))) - return -EFAULT; - down_read(&nilfs->ns_segctor_sem); - ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), - nilfs_ioctl_do_get_suinfo); + ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs); up_read(&nilfs->ns_segctor_sem); - if (ret < 0) - return ret; - - if (copy_to_user(argp, &argv, sizeof(argv))) - ret = -EFAULT; return ret; } @@ -242,28 +208,11 @@ static ssize_t nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags, void *buf, size_t size, size_t nmembs) { - return nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs); -} - -static int nilfs_ioctl_get_vinfo(struct inode *inode, struct file *filp, - unsigned int cmd, void __user *argp) -{ - struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs; - struct nilfs_argv argv; int ret; - if (copy_from_user(&argv, argp, sizeof(argv))) - return -EFAULT; - down_read(&nilfs->ns_segctor_sem); - ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), - nilfs_ioctl_do_get_vinfo); + ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs); up_read(&nilfs->ns_segctor_sem); - if (ret < 0) - return ret; - - if (copy_to_user(argp, &argv, sizeof(argv))) - ret = -EFAULT; return ret; } @@ -276,17 +225,21 @@ nilfs_ioctl_do_get_bdescs(struct the_nilfs *nilfs, __u64 *posp, int flags, struct nilfs_bdesc *bdescs = buf; int ret, i; + down_read(&nilfs->ns_segctor_sem); for (i = 0; i < nmembs; i++) { ret = nilfs_bmap_lookup_at_level(bmap, bdescs[i].bd_offset, bdescs[i].bd_level + 1, &bdescs[i].bd_blocknr); if (ret < 0) { - if (ret != -ENOENT) + if (ret != -ENOENT) { + up_read(&nilfs->ns_segctor_sem); return ret; + } bdescs[i].bd_blocknr = 0; } } + up_read(&nilfs->ns_segctor_sem); return nmembs; } @@ -300,10 +253,8 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp, if (copy_from_user(&argv, argp, sizeof(argv))) return -EFAULT; - down_read(&nilfs->ns_segctor_sem); ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), nilfs_ioctl_do_get_bdescs); - up_read(&nilfs->ns_segctor_sem); if (ret < 0) return ret; @@ -623,6 +574,29 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp, return 0; } +static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp, + unsigned int cmd, void __user *argp, + ssize_t (*dofunc)(struct the_nilfs *, + __u64 *, int, + void *, size_t, size_t)) + +{ + struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs; + struct nilfs_argv argv; + int ret; + + if (copy_from_user(&argv, argp, sizeof(argv))) + return -EFAULT; + + ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc); + if (ret < 0) + return ret; + + if (copy_to_user(argp, &argv, sizeof(argv))) + ret = -EFAULT; + return ret; +} + long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct inode *inode = filp->f_dentry->d_inode; @@ -634,16 +608,18 @@ long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) case NILFS_IOCTL_DELETE_CHECKPOINT: return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp); case NILFS_IOCTL_GET_CPINFO: - return nilfs_ioctl_get_cpinfo(inode, filp, cmd, argp); + return nilfs_ioctl_get_info(inode, filp, cmd, argp, + nilfs_ioctl_do_get_cpinfo); case NILFS_IOCTL_GET_CPSTAT: return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp); case NILFS_IOCTL_GET_SUINFO: - return nilfs_ioctl_get_suinfo(inode, filp, cmd, argp); + return nilfs_ioctl_get_info(inode, filp, cmd, argp, + nilfs_ioctl_do_get_suinfo); case NILFS_IOCTL_GET_SUSTAT: return nilfs_ioctl_get_sustat(inode, filp, cmd, argp); case NILFS_IOCTL_GET_VINFO: - /* XXX: rename to ??? */ - return nilfs_ioctl_get_vinfo(inode, filp, cmd, argp); + return nilfs_ioctl_get_info(inode, filp, cmd, argp, + nilfs_ioctl_do_get_vinfo); case NILFS_IOCTL_GET_BDESCS: return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp); case NILFS_IOCTL_CLEAN_SEGMENTS: From 4f6b828837b4e3836f2c9ac2f0eab9773b6c1327 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 10 May 2009 22:41:43 +0900 Subject: [PATCH 126/670] nilfs2: fix lock order reversal in nilfs_clean_segments ioctl This is a companion patch to ("nilfs2: fix possible circular locking for get information ioctls"). This corrects lock order reversal between mm->mmap_sem and nilfs->ns_segctor_sem in nilfs_clean_segments() which was detected by lockdep check: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.30-rc3-nilfs-00003-g360bdc1 #7 ------------------------------------------------------- mmap/5294 is trying to acquire lock: (&nilfs->ns_segctor_sem){++++.+}, at: [] nilfs_transaction_begin+0xb6/0x10c [nilfs2] but task is already holding lock: (&mm->mmap_sem){++++++}, at: [] do_page_fault+0x1d8/0x30a which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mm->mmap_sem){++++++}: [] __lock_acquire+0x1066/0x13b0 [] lock_acquire+0xba/0xdd [] might_fault+0x68/0x88 [] copy_from_user+0x2a/0x111 [] nilfs_ioctl_prepare_clean_segments+0x1d/0xf1 [nilfs2] [] nilfs_clean_segments+0x6d/0x1b9 [nilfs2] [] nilfs_ioctl+0x2ad/0x318 [nilfs2] [] vfs_ioctl+0x22/0x69 [] do_vfs_ioctl+0x460/0x499 [] sys_ioctl+0x40/0x5a [] sysenter_do_call+0x12/0x38 [] 0xffffffff -> #0 (&nilfs->ns_segctor_sem){++++.+}: [] __lock_acquire+0xdcc/0x13b0 [] lock_acquire+0xba/0xdd [] down_read+0x2a/0x3e [] nilfs_transaction_begin+0xb6/0x10c [nilfs2] [] nilfs_page_mkwrite+0xe7/0x154 [nilfs2] [] __do_fault+0x165/0x376 [] handle_mm_fault+0x287/0x5d1 [] do_page_fault+0x2fb/0x30a [] error_code+0x72/0x78 [] 0xffffffff where nilfs_clean_segments() holds: nilfs->ns_segctor_sem -> copy_from_user() --> page fault -> mm->mmap_sem And, page fault path may hold: page fault -> mm->mmap_sem --> nilfs_page_mkwrite() -> nilfs->ns_segctor_sem Even though nilfs_clean_segments() does not perform write access on given user pages, it may cause deadlock because nilfs->ns_segctor_sem is shared per device and mm->mmap_sem can be shared with other tasks. To avoid this problem, this patch moves all calls of copy_from_user() outside the nilfs->ns_segctor_sem lock in the ioctl. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/ioctl.c | 163 +++++++++++++++++++++++++------------------- fs/nilfs2/nilfs.h | 3 +- fs/nilfs2/segment.c | 5 +- fs/nilfs2/segment.h | 3 +- 4 files changed, 100 insertions(+), 74 deletions(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index e3c693d37d69..49489f68eabe 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -25,6 +25,7 @@ #include /* lock_kernel(), unlock_kernel() */ #include /* capable() */ #include /* copy_from_user(), copy_to_user() */ +#include #include #include "nilfs.h" #include "segment.h" @@ -297,10 +298,10 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode, return 0; } -static ssize_t -nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags, - void *buf, size_t size, size_t nmembs) +static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs, + struct nilfs_argv *argv, void *buf) { + size_t nmembs = argv->v_nmembs; struct inode *inode; struct nilfs_vdesc *vdesc; struct buffer_head *bh, *n; @@ -361,19 +362,10 @@ nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags, return ret; } -static inline int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs, - struct nilfs_argv *argv, - int dir) -{ - return nilfs_ioctl_wrap_copy(nilfs, argv, dir, - nilfs_ioctl_do_move_blocks); -} - -static ssize_t -nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp, - int flags, void *buf, size_t size, - size_t nmembs) +static int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs, + struct nilfs_argv *argv, void *buf) { + size_t nmembs = argv->v_nmembs; struct inode *cpfile = nilfs->ns_cpfile; struct nilfs_period *periods = buf; int ret, i; @@ -387,36 +379,21 @@ nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp, return nmembs; } -static inline int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs, - struct nilfs_argv *argv, - int dir) +static int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs, + struct nilfs_argv *argv, void *buf) { - return nilfs_ioctl_wrap_copy(nilfs, argv, dir, - nilfs_ioctl_do_delete_checkpoints); -} + size_t nmembs = argv->v_nmembs; + int ret; -static ssize_t -nilfs_ioctl_do_free_vblocknrs(struct the_nilfs *nilfs, __u64 *posp, int flags, - void *buf, size_t size, size_t nmembs) -{ - int ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs); + ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs); return (ret < 0) ? ret : nmembs; } -static inline int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs, - struct nilfs_argv *argv, - int dir) -{ - return nilfs_ioctl_wrap_copy(nilfs, argv, dir, - nilfs_ioctl_do_free_vblocknrs); -} - -static ssize_t -nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp, - int flags, void *buf, size_t size, - size_t nmembs) +static int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs, + struct nilfs_argv *argv, void *buf) { + size_t nmembs = argv->v_nmembs; struct inode *dat = nilfs_dat_inode(nilfs); struct nilfs_bmap *bmap = NILFS_I(dat)->i_bmap; struct nilfs_bdesc *bdescs = buf; @@ -455,18 +432,10 @@ nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp, return nmembs; } -static inline int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs, - struct nilfs_argv *argv, - int dir) -{ - return nilfs_ioctl_wrap_copy(nilfs, argv, dir, - nilfs_ioctl_do_mark_blocks_dirty); -} - -static ssize_t -nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags, - void *buf, size_t size, size_t nmembs) +static int nilfs_ioctl_free_segments(struct the_nilfs *nilfs, + struct nilfs_argv *argv, void *buf) { + size_t nmembs = argv->v_nmembs; struct nilfs_sb_info *sbi = nilfs->ns_writer; int ret; @@ -481,31 +450,19 @@ nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags, return (ret < 0) ? ret : nmembs; } -static inline int nilfs_ioctl_free_segments(struct the_nilfs *nilfs, - struct nilfs_argv *argv, - int dir) -{ - return nilfs_ioctl_wrap_copy(nilfs, argv, dir, - nilfs_ioctl_do_free_segments); -} - int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs, - void __user *argp) + struct nilfs_argv *argv, void **kbufs) { - struct nilfs_argv argv[5]; const char *msg; - int dir, ret; + int ret; - if (copy_from_user(argv, argp, sizeof(argv))) - return -EFAULT; - - dir = _IOC_WRITE; - ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], dir); + ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], kbufs[0]); if (ret < 0) { msg = "cannot read source blocks"; goto failed; } - ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], dir); + + ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], kbufs[1]); if (ret < 0) { /* * can safely abort because checkpoints can be removed @@ -514,7 +471,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs, msg = "cannot delete checkpoints"; goto failed; } - ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], dir); + ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], kbufs[2]); if (ret < 0) { /* * can safely abort because DAT file is updated atomically @@ -523,7 +480,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs, msg = "cannot delete virtual blocks from DAT file"; goto failed; } - ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], dir); + ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], kbufs[3]); if (ret < 0) { /* * can safely abort because the operation is nondestructive. @@ -531,7 +488,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs, msg = "cannot mark copying blocks dirty"; goto failed; } - ret = nilfs_ioctl_free_segments(nilfs, &argv[4], dir); + ret = nilfs_ioctl_free_segments(nilfs, &argv[4], kbufs[4]); if (ret < 0) { /* * can safely abort because this operation is atomic. @@ -551,9 +508,75 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs, static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp, unsigned int cmd, void __user *argp) { + struct nilfs_argv argv[5]; + const static size_t argsz[5] = { + sizeof(struct nilfs_vdesc), + sizeof(struct nilfs_period), + sizeof(__u64), + sizeof(struct nilfs_bdesc), + sizeof(__u64), + }; + void __user *base; + void *kbufs[5]; + struct the_nilfs *nilfs; + size_t len, nsegs; + int n, ret; + if (!capable(CAP_SYS_ADMIN)) return -EPERM; - return nilfs_clean_segments(inode->i_sb, argp); + + if (copy_from_user(argv, argp, sizeof(argv))) + return -EFAULT; + + nsegs = argv[4].v_nmembs; + if (argv[4].v_size != argsz[4]) + return -EINVAL; + /* + * argv[4] points to segment numbers this ioctl cleans. We + * use kmalloc() for its buffer because memory used for the + * segment numbers is enough small. + */ + kbufs[4] = memdup_user((void __user *)(unsigned long)argv[4].v_base, + nsegs * sizeof(__u64)); + if (IS_ERR(kbufs[4])) + return PTR_ERR(kbufs[4]); + + nilfs = NILFS_SB(inode->i_sb)->s_nilfs; + + for (n = 0; n < 4; n++) { + ret = -EINVAL; + if (argv[n].v_size != argsz[n]) + goto out_free; + + if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment) + goto out_free; + + len = argv[n].v_size * argv[n].v_nmembs; + base = (void __user *)(unsigned long)argv[n].v_base; + if (len == 0) { + kbufs[n] = NULL; + continue; + } + + kbufs[n] = vmalloc(len); + if (!kbufs[n]) { + ret = -ENOMEM; + goto out_free; + } + if (copy_from_user(kbufs[n], base, len)) { + ret = -EFAULT; + vfree(kbufs[n]); + goto out_free; + } + } + + ret = nilfs_clean_segments(inode->i_sb, argv, kbufs); + + out_free: + while (--n > 0) + vfree(kbufs[n]); + kfree(kbufs[4]); + return ret; } static int nilfs_ioctl_sync(struct inode *inode, struct file *filp, diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h index 3d0c18a16db1..da6fc0bba2e5 100644 --- a/fs/nilfs2/nilfs.h +++ b/fs/nilfs2/nilfs.h @@ -236,7 +236,8 @@ extern int nilfs_sync_file(struct file *, struct dentry *, int); /* ioctl.c */ long nilfs_ioctl(struct file *, unsigned int, unsigned long); -int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, void __user *); +int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, struct nilfs_argv *, + void **); /* inode.c */ extern struct inode *nilfs_new_inode(struct inode *, int); diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index fb70ec3be20e..22c7f65c2403 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -2589,7 +2589,8 @@ nilfs_remove_written_gcinodes(struct the_nilfs *nilfs, struct list_head *head) } } -int nilfs_clean_segments(struct super_block *sb, void __user *argp) +int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv, + void **kbufs) { struct nilfs_sb_info *sbi = NILFS_SB(sb); struct nilfs_sc_info *sci = NILFS_SC(sbi); @@ -2606,7 +2607,7 @@ int nilfs_clean_segments(struct super_block *sb, void __user *argp) err = nilfs_init_gcdat_inode(nilfs); if (unlikely(err)) goto out_unlock; - err = nilfs_ioctl_prepare_clean_segments(nilfs, argp); + err = nilfs_ioctl_prepare_clean_segments(nilfs, argv, kbufs); if (unlikely(err)) goto out_unlock; diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h index a98fc1ed0bbb..476bdd5df5be 100644 --- a/fs/nilfs2/segment.h +++ b/fs/nilfs2/segment.h @@ -222,7 +222,8 @@ extern int nilfs_construct_segment(struct super_block *); extern int nilfs_construct_dsync_segment(struct super_block *, struct inode *, loff_t, loff_t); extern void nilfs_flush_segment(struct super_block *, ino_t); -extern int nilfs_clean_segments(struct super_block *, void __user *); +extern int nilfs_clean_segments(struct super_block *, struct nilfs_argv *, + void **); extern int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *, __u64 *, size_t); From 19bca6ab75d8118ae970fcc656359ddb467ac763 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 28 Apr 2009 12:45:30 +0200 Subject: [PATCH 127/670] KVM: SVM: Fix cross vendor migration issue with unusable bit AMDs VMCB does not have an explicit unusable segment descriptor field, so we emulate it by using "not present". This has to be setup before the fixups, because this field is used there. Signed-off-by: Andre Przywara Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 1821c2078199..9184e32778ab 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -796,6 +796,11 @@ static void svm_get_segment(struct kvm_vcpu *vcpu, var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1; var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1; + /* AMD's VMCB does not have an explicit unusable field, so emulate it + * for cross vendor migration purposes by "not present" + */ + var->unusable = !var->present || (var->type == 0); + switch (seg) { case VCPU_SREG_CS: /* @@ -827,8 +832,6 @@ static void svm_get_segment(struct kvm_vcpu *vcpu, var->type |= 0x1; break; } - - var->unusable = !var->present; } static int svm_get_cpl(struct kvm_vcpu *vcpu) From 334b8ad7b182fc14d720acd7729afda3ab4c7e3a Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 3 May 2009 16:34:21 +0300 Subject: [PATCH 128/670] KVM: Fix NX support reporting NX support is bit 20, not bit 1. Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 7c1ce5ac6131..834a7bf25e48 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1259,7 +1259,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) | bit(X86_FEATURE_MMX) | bit(X86_FEATURE_FXSR) | bit(X86_FEATURE_SYSCALL) | - (bit(X86_FEATURE_NX) && is_efer_nx()) | + (is_efer_nx() ? bit(X86_FEATURE_NX) : 0) | #ifdef CONFIG_X86_64 bit(X86_FEATURE_LM) | #endif From e286e86e6d2042d67d09244aa0e05ffef75c9d54 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 3 May 2009 18:50:55 +0300 Subject: [PATCH 129/670] KVM: Make EFER reads safe when EFER does not exist Some processors don't have EFER; don't oops if userspace wants us to read EFER when we check NX. Cc: stable@kernel.org Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 834a7bf25e48..49079a46687b 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1121,9 +1121,9 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) static int is_efer_nx(void) { - u64 efer; + unsigned long long efer = 0; - rdmsrl(MSR_EFER, efer); + rdmsrl_safe(MSR_EFER, &efer); return efer & EFER_NX; } From 917a0153621572e88aeb2d5df025ad2e81027287 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 21:36:16 -0700 Subject: [PATCH 130/670] x86: mtrr: Fix high_width computation when phys-addr is >= 44bit found one system where cpu address line is 44bits, mtrr printout is not right: [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0 00000000 mask FF0 00000000 write-back [ 0.000000] 1 base 10 00000000 mask FFF 80000000 write-back [ 0.000000] 2 base 0 80000000 mask FFF 80000000 uncachable [ 0.000000] 3 base 0 7F800000 mask FFF FF800000 uncachable Li Zefan and Frederic pointed out the high_width could be -4 some how. It turns out when phys_addr is 44bit, size_or_mask will be ffffffff,00000000 so ffs(size_or_mask) will be 0. Try to check low 32 bit, to get correct high_width. Signed-off-by: Yinghai Lu Also-analyzed-by: Frederic Weisbecker Also-analyzed-by: Li Zefan Cc: Jeremy Fitzhardinge Cc: Zhaolei Cc: Steven Rostedt Cc: Vegard Nossum Cc: Andrew Morton LKML-Reference: <4A026540.8060504@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 0b776c09aff3..d21d4fb161f7 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -275,7 +275,11 @@ static void __init print_mtrr_state(void) } printk(KERN_DEBUG "MTRR variable ranges %sabled:\n", mtrr_state.enabled & 2 ? "en" : "dis"); - high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4; + if (size_or_mask & 0xffffffffUL) + high_width = ffs(size_or_mask & 0xffffffffUL) - 1; + else + high_width = ffs(size_or_mask>>32) + 32 - 1; + high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4; for (i = 0; i < num_var_ranges; ++i) { if (mtrr_state.var_ranges[i].mask_lo & (1 << 11)) printk(KERN_DEBUG " %u base %0*X%05X000 mask %0*X%05X000 %s\n", From 99f85a28a78e96d28907fe036e1671a218fee597 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Mon, 11 May 2009 14:21:10 +0300 Subject: [PATCH 131/670] KVM: SVM: Remove port 80 passthrough MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit KVM optimizes guest port 80 accesses by passthing them through to the host. Some AMD machines die on port 80 writes, allowing the guest to hard-lock the host. Remove the port passthrough to avoid the problem. Cc: stable@kernel.org Reported-by: Piotr JaroszyÅ„ski Tested-by: Piotr JaroszyÅ„ski Signed-off-by: Avi Kivity --- arch/x86/kvm/svm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 9184e32778ab..1f8510c51d6e 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -411,7 +411,6 @@ static __init int svm_hardware_setup(void) iopm_va = page_address(iopm_pages); memset(iopm_va, 0xff, PAGE_SIZE * (1 << IOPM_ALLOC_ORDER)); - clear_bit(0x80, iopm_va); /* allow direct access to PC debug port */ iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT; if (boot_cpu_has(X86_FEATURE_NX)) From fd18de50b9e7965f93d231e7390436fb8900c0e6 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 10 May 2009 23:57:41 +0100 Subject: [PATCH 132/670] intel-iommu: PAE memory corruption fix PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE. So it's not sufficient to ensure that you use phys_addr_t or uint64_t everywhere you handle physical addresses -- you also have to avoid using the construct 'addr & PAGE_MASK', because that will strip the high 32 bits of the address. This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances that don't matter -- where it's being used on the virtual bus addresses we're dishing out, which are 32-bit anyway. Since PHYSICAL_PAGE_MASK is not present on other architectures, we have to define it (to PAGE_MASK) if it's not already defined. Maybe it would be better just to fix PAGE_MASK for i386/PAE? Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/pci/intel-iommu.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 001b328adf80..a563fbe559d0 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -59,6 +59,10 @@ #define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32)) #define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64)) +#ifndef PHYSICAL_PAGE_MASK +#define PHYSICAL_PAGE_MASK PAGE_MASK +#endif + /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; @@ -1216,7 +1220,7 @@ static void dmar_init_reserved_ranges(void) if (!r->flags || !(r->flags & IORESOURCE_MEM)) continue; addr = r->start; - addr &= PAGE_MASK; + addr &= PHYSICAL_PAGE_MASK; size = r->end - addr; size = PAGE_ALIGN(size); iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr), @@ -2173,7 +2177,8 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, * is not a big problem */ ret = domain_page_mapping(domain, start_paddr, - ((u64)paddr) & PAGE_MASK, size, prot); + ((u64)paddr) & PHYSICAL_PAGE_MASK, + size, prot); if (ret) goto error; @@ -2463,8 +2468,8 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne addr = page_to_phys(sg_page(sg)) + sg->offset; size = aligned_size((u64)addr, sg->length); ret = domain_page_mapping(domain, start_addr + offset, - ((u64)addr) & PAGE_MASK, - size, prot); + ((u64)addr) & PHYSICAL_PAGE_MASK, + size, prot); if (ret) { /* clear the page */ dma_pte_clear_range(domain, start_addr, From f5208997087e6eb2096532b5a313eeb236535bdc Mon Sep 17 00:00:00 2001 From: Zoltan Karcagi Date: Wed, 6 May 2009 16:30:21 +0200 Subject: [PATCH 133/670] HID: fix dropped device-specific quirks Device-specific quirks are set up correctly in their respective vendor-specific driver, then get overwritten in usbhid_parse(). This is only issue for device-specific NOGET quirks being set by driver for a few devices out there. Signed-off-by: Zoltan Karcagi Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hid-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 900ce18dd549..ac8049b5f1e9 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -898,7 +898,7 @@ static int usbhid_parse(struct hid_device *hid) goto err; } - hid->quirks = quirks; + hid->quirks |= quirks; return 0; err: From b820aabf6cb987fd03d85b0b5f599685051e0426 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 6 May 2009 15:48:49 -0400 Subject: [PATCH 134/670] HID: add NOGET quirk for devices from CH Products This patch (as1240) adds the NOGET quirk for three devices from CH Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim yoke. Without these quirks, the devices haven't worked for many kernel releases. Sometimes replugging them after boot-up would get them to work and sometimes they wouldn't work at all. Signed-off-by: Alan Stern Reported-by: Sean Hildebrand Reported-by: Sid Boyce Tested-by: Sean Hildebrand Tested-by: Sid Boyce Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 5 +++++ drivers/hid/usbhid/hid-quirks.c | 3 +++ 2 files changed, 8 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index aa1b995dd033..4d5ee2bbc62b 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -113,6 +113,11 @@ #define USB_VENDOR_ID_BERKSHIRE 0x0c98 #define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140 +#define USB_VENDOR_ID_CH 0x068e +#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2 +#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4 +#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff + #define USB_VENDOR_ID_CHERRY 0x046a #define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 4391717d2519..d8f7423f363e 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -50,6 +50,9 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET }, { USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET }, { USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET }, From 3c598766a2bae1b208470e7cc934ac462561e3cb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 11 May 2009 16:49:28 +0100 Subject: [PATCH 135/670] x86: fix percpu_{to,from}_op() - the byte operand constraints were wrong for 32-bit - the to-op's input operands weren't properly parenthesized [ Impact: fix possible miscompilation or build failure ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/percpu.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index aee103b26d01..02ecb30982a3 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -82,22 +82,22 @@ do { \ case 1: \ asm(op "b %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "qi" ((T__)(val))); \ break; \ case 2: \ asm(op "w %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "ri" ((T__)(val))); \ break; \ case 4: \ asm(op "l %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "ri" ((T__)(val))); \ break; \ case 8: \ asm(op "q %1,"__percpu_arg(0) \ : "+m" (var) \ - : "re" ((T__)val)); \ + : "re" ((T__)(val))); \ break; \ default: __bad_percpu_size(); \ } \ @@ -109,7 +109,7 @@ do { \ switch (sizeof(var)) { \ case 1: \ asm(op "b "__percpu_arg(1)",%0" \ - : "=r" (ret__) \ + : "=q" (ret__) \ : "m" (var)); \ break; \ case 2: \ From 83aca8f480fcd2d9748301a5d060cf947dc75b94 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 11 May 2009 23:24:47 +0900 Subject: [PATCH 136/670] nilfs2: check size of array structured data exchanged via ioctls Although some ioctls of nilfs2 exchange data in the form of indirectly referenced array, some of them lack size check on the array elements. This inserts the missing checks and rejects requests if data of ioctl does not have a valid format. We usually don't have to check size of structures that we associated with ioctl commands because the size is tested implicitly for identifying ioctl command; the checks this patch adds are for the cases where the implicit check is not applied. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/ioctl.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 49489f68eabe..50ff3f2cdf24 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -254,6 +254,9 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp, if (copy_from_user(&argv, argp, sizeof(argv))) return -EFAULT; + if (argv.v_size != sizeof(struct nilfs_bdesc)) + return -EINVAL; + ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), nilfs_ioctl_do_get_bdescs); if (ret < 0) @@ -599,6 +602,7 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp, static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp, unsigned int cmd, void __user *argp, + size_t membsz, ssize_t (*dofunc)(struct the_nilfs *, __u64 *, int, void *, size_t, size_t)) @@ -611,6 +615,9 @@ static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp, if (copy_from_user(&argv, argp, sizeof(argv))) return -EFAULT; + if (argv.v_size != membsz) + return -EINVAL; + ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc); if (ret < 0) return ret; @@ -632,16 +639,19 @@ long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp); case NILFS_IOCTL_GET_CPINFO: return nilfs_ioctl_get_info(inode, filp, cmd, argp, + sizeof(struct nilfs_cpinfo), nilfs_ioctl_do_get_cpinfo); case NILFS_IOCTL_GET_CPSTAT: return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp); case NILFS_IOCTL_GET_SUINFO: return nilfs_ioctl_get_info(inode, filp, cmd, argp, + sizeof(struct nilfs_suinfo), nilfs_ioctl_do_get_suinfo); case NILFS_IOCTL_GET_SUSTAT: return nilfs_ioctl_get_sustat(inode, filp, cmd, argp); case NILFS_IOCTL_GET_VINFO: return nilfs_ioctl_get_info(inode, filp, cmd, argp, + sizeof(struct nilfs_vinfo), nilfs_ioctl_do_get_vinfo); case NILFS_IOCTL_GET_BDESCS: return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp); From 72af2b363107df9cd67985ecb8495bbdff3c9857 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 11 May 2009 09:58:19 -0700 Subject: [PATCH 137/670] ARM: OMAP: Fix printing of reserved memory for frambuffer Print reserved memory only if it was actually reserved. Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/fb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index ce6b4baeedec..3746222bed10 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void) config_invalid = 1; return; } - if (rg.paddr) + if (rg.paddr) { reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT); - reserved += rg.size; + reserved += rg.size; + } omapfb_config.mem_desc.region[i] = rg; configured_regions++; } From 914dc18255e430ceabb10b57394e01814c69c5cd Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 11 May 2009 13:04:55 +0300 Subject: [PATCH 138/670] ASoC: soc-core: fix crash when removing not instantiated card If the card was not instantiated in snd_soc_instantiate_card, calling soc-remove will crash because some of codec, cpu_dai and card .remove methods are called twice. Fix this by returning from soc_remove immediately. Signed-off-by: Mike Rapoport Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 99712f652d0d..1cd149b9ce69 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -954,6 +954,9 @@ static int soc_remove(struct platform_device *pdev) struct snd_soc_platform *platform = card->platform; struct snd_soc_codec_device *codec_dev = socdev->codec_dev; + if (!card->instantiated) + return 0; + run_delayed_work(&card->delayed_work); if (platform->remove) From 1ffafeb556d50de8039e14f1cbbe58e9e4549915 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 11 May 2009 13:11:38 +0300 Subject: [PATCH 139/670] pxa2xx-ac97: fix reset gpio mode setting Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Mark Brown --- sound/arm/pxa2xx-ac97-lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index a2c12d105c9a..6fdca97186e7 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -65,7 +65,7 @@ static void set_resetgpio_mode(int resetgpio_action) switch (resetgpio_action) { case RESETGPIO_NORMAL_ALTFUNC: if (reset_gpio == 113) - mode = 113 | GPIO_OUT | GPIO_DFLT_LOW; + mode = 113 | GPIO_ALT_FN_2_OUT; if (reset_gpio == 95) mode = 95 | GPIO_ALT_FN_1_OUT; break; From 842faa6c1a1d6faddf3377948e5cf214812c6c90 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 10 May 2009 01:06:54 +0900 Subject: [PATCH 140/670] libata: fix attach error handling New device attach path in ata_eh_revalidate_and_attach() is divided into two separate loops because ATA requires IDENTIFY to be issued to slave first while the user expects to see device probe messages from the master device. new_mask is used to track which devices are the new ones between the first loop and the second. This usually works well but if an error occurs during configuration stage, ata_dev_revalidate_and_attach() returns with error code and forgets new_mask. On the retry run, dev->class is set and new_mask for the device is clear, so the device just gets revalidated and thus ends up skipping post-configuration procedure including scheduling of SCSI_HOTPLUG for the device. When this occurs, ATA part of probing works fine but SCSI probing usually doesn't happen and makes the device unreachable. The behavior has been around for a very long time but it has been uncovered with the recent addition of 1_5_GBPS horkage which uses -EAGAIN return value from ata_dev_configure() to restart the probing sequence after forcing cable speed. This can be fixed by making sure dev->class is permanently set only after all configurations are successfully complete. Fix it. Signed-off-by: Tejun Heo Reported-by: Tim Connors Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 01831312c360..eb8b94016c01 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, } else if (dev->class == ATA_DEV_UNKNOWN && ehc->tries[dev->devno] && ata_class_enabled(ehc->classes[dev->devno])) { + /* Temporarily set dev->class, it will be + * permanently set once all configurations are + * complete. This is necessary because new + * device configuration is done in two + * separate loops. + */ dev->class = ehc->classes[dev->devno]; if (dev->class == ATA_DEV_PMP) @@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, else rc = ata_dev_read_id(dev, &dev->class, readid_flags, dev->id); + + /* read_id might have changed class, store and reset */ + ehc->classes[dev->devno] = dev->class; + dev->class = ATA_DEV_UNKNOWN; + switch (rc) { case 0: /* clear error info accumulated during probe */ @@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, case -ENOENT: /* IDENTIFY was issued to non-existent * device. No need to reset. Just - * thaw and kill the device. + * thaw and ignore the device. */ ata_eh_thaw_port(ap); - dev->class = ATA_DEV_UNKNOWN; break; default: - dev->class = ATA_DEV_UNKNOWN; goto err; } } @@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, dev->class == ATA_DEV_PMP) continue; + dev->class = ehc->classes[dev->devno]; + ehc->i.flags |= ATA_EHI_PRINTINFO; rc = ata_dev_configure(dev); ehc->i.flags &= ~ATA_EHI_PRINTINFO; - if (rc) + if (rc) { + dev->class = ATA_DEV_UNKNOWN; goto err; + } spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG; From 29b7e43c310bdc20d240c7674d9073f6c1c12a3f Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Mon, 4 May 2009 20:58:50 +0200 Subject: [PATCH 141/670] sata_mv: use new sata phy register settings for new devices Marvell's new SoC (65 nano) needs different settings for its SATA PHY registers. Tested-by: Martin Michlmayr Signed-off-by: Saeed Bishara Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 69 +++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 67 insertions(+), 2 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 870dcfd82357..23714aefb825 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -293,6 +293,10 @@ enum { FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */ FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */ + PHY_MODE9_GEN2 = 0x398, + PHY_MODE9_GEN1 = 0x39c, + PHYCFG_OFS = 0x3a0, /* only in 65n devices */ + MV5_PHY_MODE = 0x74, MV5_LTMODE = 0x30, MV5_PHY_CTL = 0x0C, @@ -609,6 +613,8 @@ static int mv_soc_reset_hc(struct mv_host_priv *hpriv, static void mv_soc_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio); +static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port); static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio); static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); @@ -807,6 +813,14 @@ static const struct mv_hw_ops mv_soc_ops = { .reset_bus = mv_soc_reset_bus, }; +static const struct mv_hw_ops mv_soc_65n_ops = { + .phy_errata = mv_soc_65n_phy_errata, + .enable_leds = mv_soc_enable_leds, + .reset_hc = mv_soc_reset_hc, + .reset_flash = mv_soc_reset_flash, + .reset_bus = mv_soc_reset_bus, +}; + /* * Functions */ @@ -3397,6 +3411,53 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio) return; } +static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv, + void __iomem *mmio, unsigned int port) +{ + void __iomem *port_mmio = mv_port_base(mmio, port); + u32 reg; + + reg = readl(port_mmio + PHY_MODE3); + reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */ + reg |= (0x1 << 27); + reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */ + reg |= (0x1 << 29); + writel(reg, port_mmio + PHY_MODE3); + + reg = readl(port_mmio + PHY_MODE4); + reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */ + reg |= (0x1 << 16); + writel(reg, port_mmio + PHY_MODE4); + + reg = readl(port_mmio + PHY_MODE9_GEN2); + reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ + reg |= 0x8; + reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ + writel(reg, port_mmio + PHY_MODE9_GEN2); + + reg = readl(port_mmio + PHY_MODE9_GEN1); + reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */ + reg |= 0x8; + reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */ + writel(reg, port_mmio + PHY_MODE9_GEN1); +} + +/** + * soc_is_65 - check if the soc is 65 nano device + * + * Detect the type of the SoC, this is done by reading the PHYCFG_OFS + * register, this register should contain non-zero value and it exists only + * in the 65 nano devices, when reading it from older devices we get 0. + */ +static bool soc_is_65n(struct mv_host_priv *hpriv) +{ + void __iomem *port0_mmio = mv_port_base(hpriv->base, 0); + + if (readl(port0_mmio + PHYCFG_OFS)) + return true; + return false; +} + static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i) { u32 ifcfg = readl(port_mmio + SATA_IFCFG); @@ -3737,7 +3798,10 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) } break; case chip_soc: - hpriv->ops = &mv_soc_ops; + if (soc_is_65n(hpriv)) + hpriv->ops = &mv_soc_65n_ops; + else + hpriv->ops = &mv_soc_ops; hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE | MV_HP_ERRATA_60X1C0; break; @@ -3800,7 +3864,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) n_hc = mv_get_hc_count(host->ports[0]->flags); for (port = 0; port < host->n_ports; port++) - hpriv->ops->read_preamp(hpriv, port, mmio); + if (hpriv->ops->read_preamp) + hpriv->ops->read_preamp(hpriv, port, mmio); rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc); if (rc) From 6ad58b245a543461bd55d51b8303f555419687b2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 20 Apr 2009 22:31:25 +0200 Subject: [PATCH 142/670] pata_pdc202xx_old: fix UDMA33 handling The original driver doesn't use 66 MHz clock for UDMA33. [ The alternative solution would be to adjust UDMA33 timings for 66 MHz clock but I think that it is safer to stick with old & tested behavior for now. ] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Jeff Garzik --- drivers/ata/pata_pdc202xx_old.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 5fedb3d4032b..2f3c9bed63d9 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -2,7 +2,7 @@ * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox - * (C) 2007 Bartlomiej Zolnierkiewicz + * (C) 2007,2009 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c * @@ -158,7 +158,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) u32 len; /* Check we keep host level locking here */ - if (adev->dma_mode >= XFER_UDMA_2) + if (adev->dma_mode > XFER_UDMA_2) iowrite8(ioread8(clock) | sel66, clock); else iowrite8(ioread8(clock) & ~sel66, clock); @@ -212,7 +212,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) iowrite8(ioread8(clock) & ~sel66, clock); } /* Flip back to 33Mhz for PIO */ - if (adev->dma_mode >= XFER_UDMA_2) + if (adev->dma_mode > XFER_UDMA_2) iowrite8(ioread8(clock) & ~sel66, clock); ata_bmdma_stop(qc); pdc202xx_set_piomode(ap, adev); From 6f9c1ea2c1cea2de3e5670a7cd98d9f7316b0952 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Apr 2009 09:55:28 +0900 Subject: [PATCH 143/670] libata: clear ering on resume Error timestamps are in jiffies which doesn't run while suspended and PHY events during resume isn't too uncommon. When the two are combined, it can lead to unnecessary speed downs if the machine is suspended and resumed repeatedly. Clear error history on resume. This was reported and verified in bnc#486803 by Vladimir Botka. Signed-off-by: Tejun Heo Reported-by: Vladimir Botka Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index eb8b94016c01..94919ad03df1 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3507,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap) */ static void ata_eh_handle_port_resume(struct ata_port *ap) { + struct ata_link *link; + struct ata_device *dev; unsigned long flags; int rc = 0; @@ -3521,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap) WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); + /* + * Error timestamps are in jiffies which doesn't run while + * suspended and PHY events during resume isn't too uncommon. + * When the two are combined, it can lead to unnecessary speed + * downs if the machine is suspended and resumed repeatedly. + * Clear error history. + */ + ata_for_each_link(link, ap, HOST_FIRST) + ata_for_each_dev(dev, link, ALL) + ata_ering_clear(&dev->ering); + ata_acpi_set_state(ap, PMSG_ON); if (ap->ops->port_resume) From f0d0613dedda4891ecb1977e4d02bf9be93882a3 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sun, 26 Apr 2009 16:33:34 +0200 Subject: [PATCH 144/670] libata: fix suspend/resume for ATA SEMB devices 79b42babbac2a5a522b8e269fb2811b6e1063030 fixed identifying ATA devices reporting 3c/c3 signature which belongs to SEMB devices now. However, suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails with the following: hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected sd 1:0:0:0: [sda] Starting disk ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2: limiting SATA link speed to 1.5 Gbps ata4.00: configured for UDMA/133 ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2.00: disabled sd 1:0:0:0: rejecting I/O to offline device sd 1:0:0:0: [sda] START_STOP FAILED sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 PM: Device 1:0:0:0 failed to thaw: error 65536 sd 3:0:0:0: [sdb] Starting disk due to a class mismatch in ata_dev_revalidate(). Fix it by adding the ATA_DEV_SEMB device class to the check. CC: Tejun Heo Signed-off-by: Borislav Petkov Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 17c5d48a75d2..c9242301cfa1 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4091,7 +4091,9 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, /* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */ if (ata_class_enabled(new_class) && - new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) { + new_class != ATA_DEV_ATA && + new_class != ATA_DEV_ATAPI && + new_class != ATA_DEV_SEMB) { ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n", dev->class, new_class); rc = -ENODEV; From ea7a5ed58fa40c76ff87c0dd960f1d785009dd6d Mon Sep 17 00:00:00 2001 From: Vitaly Mayatskikh Date: Mon, 4 May 2009 15:48:45 +0200 Subject: [PATCH 145/670] Avoid world-writable sysfs files in libata driver. Signed-off-by: Vitaly Mayatskikh Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2733b0c90b75..68d9132d8f6f 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -313,7 +313,7 @@ ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, return ap->ops->em_show(ap, buf); return -EINVAL; } -DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO, +DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR, ata_scsi_em_message_show, ata_scsi_em_message_store); EXPORT_SYMBOL_GPL(dev_attr_em_message); @@ -366,7 +366,7 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, } return -EINVAL; } -DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show, +DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show, ata_scsi_activity_store); EXPORT_SYMBOL_GPL(dev_attr_sw_activity); From c611bed780a51222ece8eaf303c779ef82d9d253 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 May 2009 17:08:44 +0100 Subject: [PATCH 146/670] ata_piix: ICH7 does not support correct MWDMA timings See Errata documentation. The recommended workaround is to use PIO4 instead which will we automatically do by flagging this mode not available. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 942d14ac8792..2b5700a832a2 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -72,6 +72,7 @@ * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary * and must be dword aligned * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3 + * ICH7 errata #16 - MWDMA1 timings are incorrect * * Should have been BIOS fixed: * 450NX: errata #19 - DMA hangs on old 450NX @@ -94,7 +95,7 @@ #include #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.12" +#define DRV_VERSION "2.13" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -136,6 +137,7 @@ enum piix_controller_ids { ich_pata_33, /* ICH up to UDMA 33 only */ ich_pata_66, /* ICH up to 66 Mhz */ ich_pata_100, /* ICH up to UDMA 100 */ + ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/ ich5_sata, ich6_sata, ich6m_sata, @@ -216,8 +218,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* ICH6 (and 6) (i915) UDMA 100 */ { 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, /* ICH7/7-R (i945, i975) UDMA 100*/ - { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, - { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, + { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 }, + { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 }, /* ICH8 Mobile PATA Controller */ { 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 }, @@ -487,6 +489,15 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &ich_pata_ops, }, + [ich_pata_100_nomwdma1] = + { + .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2_ONLY, + .udma_mask = ATA_UDMA5, + .port_ops = &ich_pata_ops, + }, + [ich5_sata] = { .flags = PIIX_SATA_FLAGS, From 124a6eece386226191ec79e279a5471bd2614f81 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 6 May 2009 17:09:41 +0100 Subject: [PATCH 147/670] ata_piix: The Sony TZ90 needs the cable type hardcoding The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 2b5700a832a2..d51a17c0f59b 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -605,6 +605,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ + { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */ /* end marker */ { 0, } }; From aedec9226809ae9d1972f8f8079fc70206ee7a88 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 4 May 2009 11:18:57 -0400 Subject: [PATCH 148/670] airo: airo_get_encode{,ext} potential buffer overflow Feeding the return code of get_wep_key directly to the length parameter of memcpy is a bad idea since it could be -1... Reported-by: Eugene Teo Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index c36d3a3d655f..d73475739127 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -6501,7 +6501,10 @@ static int airo_get_encode(struct net_device *dev, /* Copy the key to the user buffer */ dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf)); - memcpy(extra, buf, dwrq->length); + if (dwrq->length != -1) + memcpy(extra, buf, dwrq->length); + else + dwrq->length = 0; return 0; } @@ -6659,7 +6662,10 @@ static int airo_get_encodeext(struct net_device *dev, /* Copy the key to the user buffer */ ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); - memcpy(extra, buf, ext->key_len); + if (ext->key_len != -1) + memcpy(extra, buf, ext->key_len); + else + ext->key_len = 0; return 0; } From 621ad7c96aa138cfeab53cd4debc5a4e08b2189b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 5 May 2009 15:18:26 -0400 Subject: [PATCH 149/670] mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel "There is another problem with this piece of code. The sband will be NULL after second iteration on single band device and cause null pointer dereference. Everything is working with dual band card. Sorry, but i don't know how to explain this clearly in English. I have looked on the second patch for pid algorithm and found similar bug." Reported-by: Karol Szuster Signed-off-by: John W. Linville --- net/mac80211/rc80211_minstrel.c | 2 +- net/mac80211/rc80211_pid_algo.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 70df3dcc3cf6..d9233ec50610 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -477,7 +477,7 @@ minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp) for (i = 0; i < IEEE80211_NUM_BANDS; i++) { sband = hw->wiphy->bands[i]; - if (sband->n_bitrates > max_rates) + if (sband && sband->n_bitrates > max_rates) max_rates = sband->n_bitrates; } diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c index 01d59a8e334c..8bef9a1262ff 100644 --- a/net/mac80211/rc80211_pid_algo.c +++ b/net/mac80211/rc80211_pid_algo.c @@ -378,7 +378,7 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw, for (i = 0; i < IEEE80211_NUM_BANDS; i++) { sband = hw->wiphy->bands[i]; - if (sband->n_bitrates > max_rates) + if (sband && sband->n_bitrates > max_rates) max_rates = sband->n_bitrates; } From 9be6f0d40d9191e6fe7e45551c7d1c1614472b53 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 6 May 2009 13:57:27 -0400 Subject: [PATCH 150/670] rtl8187: use DMA-aware buffers with usb_control_msg Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187.h | 57 ++++++++++++++----- drivers/net/wireless/rtl818x/rtl8187_dev.c | 13 ++++- .../net/wireless/rtl818x/rtl8187_rtl8225.c | 8 ++- 3 files changed, 62 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index 9718f61809cf..edeff82a4d06 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -120,6 +120,12 @@ struct rtl8187_priv { __le64 buf; struct sk_buff_head queue; } b_tx_status; /* This queue is used by both -b and non-b devices */ + struct mutex io_mutex; + union { + u8 bits8; + __le16 bits16; + __le32 bits32; + } *io_dmabuf; }; void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); @@ -129,10 +135,14 @@ static inline u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv, { u8 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits8; + mutex_unlock(&priv->io_mutex); return val; } @@ -147,10 +157,14 @@ static inline u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv, { __le16 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits16; + mutex_unlock(&priv->io_mutex); return le16_to_cpu(val); } @@ -165,10 +179,14 @@ static inline u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv, { __le32 val; + mutex_lock(&priv->io_mutex); usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0), RTL8187_REQ_GET_REG, RTL8187_REQT_READ, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); + + val = priv->io_dmabuf->bits32; + mutex_unlock(&priv->io_mutex); return le32_to_cpu(val); } @@ -181,10 +199,15 @@ static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr) static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv, u8 *addr, u8 val, u8 idx) { + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits8 = val; usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &val, - sizeof(val), HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits8, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val) @@ -195,12 +218,15 @@ static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val) static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv, __le16 *addr, u16 val, u8 idx) { - __le16 buf = cpu_to_le16(val); + mutex_lock(&priv->io_mutex); + priv->io_dmabuf->bits16 = cpu_to_le16(val); usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &buf, sizeof(buf), - HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits16, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, @@ -212,12 +238,15 @@ static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr, static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv, __le32 *addr, u32 val, u8 idx) { - __le32 buf = cpu_to_le32(val); + mutex_lock(&priv->io_mutex); + priv->io_dmabuf->bits32 = cpu_to_le32(val); usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - (unsigned long)addr, idx & 0x03, &buf, sizeof(buf), - HZ / 2); + (unsigned long)addr, idx & 0x03, + &priv->io_dmabuf->bits32, sizeof(val), HZ / 2); + + mutex_unlock(&priv->io_mutex); } static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr, diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index fd81884b9c7d..bac6cfba6abd 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -1329,6 +1329,14 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, priv = dev->priv; priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B); + /* allocate "DMA aware" buffer for register accesses */ + priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL); + if (!priv->io_dmabuf) { + err = -ENOMEM; + goto err_free_dev; + } + mutex_init(&priv->io_mutex); + SET_IEEE80211_DEV(dev, &intf->dev); usb_set_intfdata(intf, dev); priv->udev = udev; @@ -1495,7 +1503,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, err = ieee80211_register_hw(dev); if (err) { printk(KERN_ERR "rtl8187: Cannot register device\n"); - goto err_free_dev; + goto err_free_dmabuf; } mutex_init(&priv->conf_mutex); skb_queue_head_init(&priv->b_tx_status.queue); @@ -1506,6 +1514,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, return 0; + err_free_dmabuf: + kfree(priv->io_dmabuf); err_free_dev: ieee80211_free_hw(dev); usb_set_intfdata(intf, NULL); @@ -1526,6 +1536,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf) priv = dev->priv; usb_reset_device(priv->udev); usb_put_dev(interface_to_usbdev(intf)); + kfree(priv->io_dmabuf); ieee80211_free_hw(dev); } diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 78df281b297a..a09819386a1e 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -88,9 +88,15 @@ static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data) rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80); udelay(10); + mutex_lock(&priv->io_mutex); + + priv->io_dmabuf->bits16 = data; usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0), RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE, - addr, 0x8225, &data, sizeof(data), HZ / 2); + addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data), + HZ / 2); + + mutex_unlock(&priv->io_mutex); rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2)); udelay(10); From 209d889bab3d0812ee9cda4f6bbeb1af8bede9d4 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 7 May 2009 08:09:08 -0400 Subject: [PATCH 151/670] ath5k: update channel in sw state after stopping RX and TX This fixes a non-theoretical race condition when transmitting and receiving frames during a scan. If the channel or operating band changes while processing status descriptors in the tasklets, ath5k will incorrectly use the new channel and band when reporting the rates, even if the frame was actually sent on a previous channel. Typically this will manifest as a beacon found on an incorrect frequency and/or a warning in the driver while scanning: [ 4773.891944] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [ 4785.461125] ------------[ cut here ]------------ [ 4785.461135] WARNING: at drivers/net/wireless/ath/ath5k/base.c:1141 ath5k_tasklet_rx+0x2ff/0x577 [ath5k]() [ 4785.461143] Hardware name: MacBook1,1 [ 4785.461148] invalid hw_rix: 1b [ 4785.461152] Modules linked in: fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod arc4 ecb snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event ath5k snd_seq hid_apple usbhid snd_seq_device mac80211 appletouch snd_pcm_oss sky2 ohci1394 snd_mixer_oss ath ieee1394 snd_pcm bitrev snd_timer cfg80211 crc32 snd snd_page_alloc button processor ac ehci_hcd joydev uhci_hcd sg battery thermal sr_mod cdrom applesmc evdev input_polldev unix [last unloaded: microcode] [ 4785.461296] Pid: 0, comm: swapper Tainted: G W 2.6.30-rc3-wl #112 [ 4785.461302] Call Trace: [ 4785.461316] [] warn_slowpath+0x76/0xa5 [ 4785.461331] [] ? debug_dma_unmap_page+0x5a/0x62 [ 4785.461357] [] ath5k_tasklet_rx+0x2ff/0x577 [ath5k] [ 4785.461371] [] ? trace_hardirqs_off+0xb/0xd [ 4785.461381] [] ? __tasklet_schedule+0x6e/0x7c [ 4785.461392] [] tasklet_action+0x92/0xe5 [ 4785.461402] [] __do_softirq+0xb1/0x182 [ 4785.461411] [] do_softirq+0x30/0x48 [ 4785.461428] [] irq_exit+0x3d/0x74 [ 4785.461435] [] do_IRQ+0x76/0x8c [ 4785.461440] [] common_interrupt+0x2e/0x34 [ 4785.461445] [] ? timer_list_show+0x1ab/0x939 [ 4785.461457] [] ? acpi_idle_enter_bm+0x27c/0x2b9 [processor] [ 4785.461463] [] cpuidle_idle_call+0x6a/0x9c [ 4785.461468] [] cpu_idle+0x53/0x87 [ 4785.461473] [] rest_init+0x6c/0x6e [ 4785.461479] [] start_kernel+0x286/0x28b [ 4785.461484] [] __init_begin+0x37/0x3c [ 4785.461487] ---[ end trace aaf8496ba3679dfb ]--- Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/base.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index a08bc8a4fb69..32df27a9c7a2 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -214,7 +214,7 @@ static struct pci_driver ath5k_pci_driver = { * Prototypes - MAC 802.11 stack related functions */ static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb); -static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel); +static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan); static int ath5k_reset_wake(struct ath5k_softc *sc); static int ath5k_start(struct ieee80211_hw *hw); static void ath5k_stop(struct ieee80211_hw *hw); @@ -1038,16 +1038,13 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) if (chan->center_freq != sc->curchan->center_freq || chan->hw_value != sc->curchan->hw_value) { - sc->curchan = chan; - sc->curband = &sc->sbands[chan->band]; - /* * To switch channels clear any pending DMA operations; * wait long enough for the RX fifo to drain, reset the * hardware at the new frequency, and then re-enable * the relevant bits of the h/w. */ - return ath5k_reset(sc, true, true); + return ath5k_reset(sc, chan); } return 0; @@ -2314,7 +2311,7 @@ ath5k_init(struct ath5k_softc *sc) sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | AR5K_INT_FATAL | AR5K_INT_GLOBAL; - ret = ath5k_reset(sc, false, false); + ret = ath5k_reset(sc, NULL); if (ret) goto done; @@ -2599,18 +2596,25 @@ drop_packet: return NETDEV_TX_OK; } +/* + * Reset the hardware. If chan is not NULL, then also pause rx/tx + * and change to the given channel. + */ static int -ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) +ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan) { struct ath5k_hw *ah = sc->ah; int ret; ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n"); - if (stop) { + if (chan) { ath5k_hw_set_imr(ah, 0); ath5k_txq_cleanup(sc); ath5k_rx_stop(sc); + + sc->curchan = chan; + sc->curband = &sc->sbands[chan->band]; } ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true); if (ret) { @@ -2648,7 +2652,7 @@ ath5k_reset_wake(struct ath5k_softc *sc) { int ret; - ret = ath5k_reset(sc, true, true); + ret = ath5k_reset(sc, sc->curchan); if (!ret) ieee80211_wake_queues(sc->hw); From 542cc7937e6af73cb2edc455a0e456d22e254abb Mon Sep 17 00:00:00 2001 From: Jay Sternberg Date: Fri, 8 May 2009 13:44:46 -0700 Subject: [PATCH 152/670] iwlwifi: fix device id registration for 6000 series 2x2 devices Add device ids for 2x2 devices. Also fix antenna usage because these devices use antennas A and B, not B and C. Signed-off-by: Jay Sternberg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 8 ++++---- drivers/net/wireless/iwlwifi/iwl-agn.c | 2 ++ 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index edfa5e149f71..bd438d8acf55 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -101,8 +101,8 @@ struct iwl_cfg iwl6000_2agn_cfg = { .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_BC, - .valid_rx_ant = ANT_BC, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, .need_pll_cfg = false, }; @@ -117,8 +117,8 @@ struct iwl_cfg iwl6050_2agn_cfg = { .eeprom_ver = EEPROM_5000_EEPROM_VERSION, .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION, .mod_params = &iwl50_mod_params, - .valid_tx_ant = ANT_BC, - .valid_rx_ant = ANT_BC, + .valid_tx_ant = ANT_AB, + .valid_rx_ant = ANT_AB, .need_pll_cfg = false, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 1ef4192207a5..3bb28db4a40f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3636,7 +3636,9 @@ static struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)}, {IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)}, {IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)}, + {IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)}, {IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)}, {IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)}, From 2b79bc4f7ebbd5af3c8b867968f9f15602d5f802 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Mon, 11 May 2009 14:25:34 -0400 Subject: [PATCH 153/670] dup2: Fix return value with oldfd == newfd and invalid fd The return value of dup2 when oldfd == newfd and the fd isn't valid is not getting properly sign extended. We end up with 4294967287 instead of -EBADF. I've reproduced this on SLE11 (2.6.27.21), openSUSE Factory (2.6.29-rc5), and Ubuntu 9.04 (2.6.28). This patch uses a signed int for the error value so it is properly extended. Commit 6c5d0512a091480c9f981162227fdb1c9d70e555 introduced this regression. Reported-by: Jiri Dluhos Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/fcntl.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index cc8e4de2fee5..1ad703150dee 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -117,11 +117,13 @@ SYSCALL_DEFINE2(dup2, unsigned int, oldfd, unsigned int, newfd) { if (unlikely(newfd == oldfd)) { /* corner case */ struct files_struct *files = current->files; + int retval = oldfd; + rcu_read_lock(); if (!fcheck_files(files, oldfd)) - oldfd = -EBADF; + retval = -EBADF; rcu_read_unlock(); - return oldfd; + return retval; } return sys_dup3(oldfd, newfd, 0); } From 8daed1e549b55827758b3af7b8132a73fc51526f Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 11 May 2009 16:10:19 -0400 Subject: [PATCH 154/670] nfsd: silence lockdep warning Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4recover.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c index 5275097a7565..b5348405046b 100644 --- a/fs/nfsd/nfs4recover.c +++ b/fs/nfsd/nfs4recover.c @@ -229,7 +229,7 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f) goto out; status = vfs_readdir(filp, nfsd4_build_namelist, &names); fput(filp); - mutex_lock(&dir->d_inode->i_mutex); + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); while (!list_empty(&names)) { entry = list_entry(names.next, struct name_list, list); @@ -264,7 +264,7 @@ nfsd4_unlink_clid_dir(char *name, int namlen) dprintk("NFSD: nfsd4_unlink_clid_dir. name %.*s\n", namlen, name); - mutex_lock(&rec_dir.dentry->d_inode->i_mutex); + mutex_lock_nested(&rec_dir.dentry->d_inode->i_mutex, I_MUTEX_PARENT); dentry = lookup_one_len(name, rec_dir.dentry, namlen); if (IS_ERR(dentry)) { status = PTR_ERR(dentry); From 9166d0f620d5dd4a128711bdeedb3e0f534d9d49 Mon Sep 17 00:00:00 2001 From: Adrian Batzill Date: Mon, 11 May 2009 15:22:16 -0700 Subject: [PATCH 155/670] Input: atkbd - add force release keys quirk for Amilo Xi 3650 Signed-off-by: Adrian Batzill Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 444dec07e5d8..df3f8aa68115 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -894,6 +894,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { 0xb0, 0xae, -1U }; +/* + * Amilo Xi 3650 key release for light touch bar not working + */ +static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { + 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U +}; + /* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set @@ -1560,6 +1567,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkbd_amilo_pa1510_forced_release_keys, }, + { + .ident = "Fujitsu Amilo Xi 3650", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_xi3650_forced_release_keys, + }, { } }; From 705a76d2d22a2824f45f07d023a380293554e989 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 11 May 2009 08:36:39 -0700 Subject: [PATCH 156/670] Input: tsc2007 - fix locking in hrtimer handler Now that hrtimers are always running in hard irq context we can't unconditionally enable interrupts at the end of the timer function. Signed-off-by: Thierry Reding Signed-off-by: Kwangwoo Lee Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/tsc2007.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 536668fbda22..948e167557f1 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -200,8 +200,9 @@ static int tsc2007_read_values(struct tsc2007 *tsc) static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) { struct tsc2007 *ts = container_of(handle, struct tsc2007, timer); + unsigned long flags; - spin_lock_irq(&ts->lock); + spin_lock_irqsave(&ts->lock, flags); if (unlikely(!ts->get_pendown_state() && ts->pendown)) { struct input_dev *input = ts->input; @@ -222,7 +223,7 @@ static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle) tsc2007_send_event(ts); } - spin_unlock_irq(&ts->lock); + spin_unlock_irqrestore(&ts->lock, flags); return HRTIMER_NORESTART; } From 7b6c6c77732ca1d2498eda7eabb64f9648896e96 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 11 May 2009 17:03:00 -0400 Subject: [PATCH 157/670] x86, 32-bit: fix kernel_trap_sp() Use ®s->sp instead of regs for getting the top of stack in kernel mode. (on x86-64, regs->sp always points the top of stack) [ Impact: Oprofile decodes only stack for backtracing on i386 ] Signed-off-by: Masami Hiramatsu [ v2: rename the API to kernel_stack_pointer(), move variable inside ] Acked-by: Linus Torvalds Cc: systemtap@sources.redhat.com Cc: Harvey Harrison Cc: Jan Blunck Cc: Christoph Hellwig LKML-Reference: <20090511210300.17332.67549.stgit@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/ptrace.h | 7 ++++--- arch/x86/oprofile/backtrace.c | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index e304b66abeea..624f133943ed 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -187,14 +187,15 @@ static inline int v8086_mode(struct pt_regs *regs) /* * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode - * when it traps. So regs will be the current sp. + * when it traps. The previous stack will be directly underneath the saved + * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'. * * This is valid only for kernel mode traps. */ -static inline unsigned long kernel_trap_sp(struct pt_regs *regs) +static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) { #ifdef CONFIG_X86_32 - return (unsigned long)regs; + return (unsigned long)(®s->sp); #else return regs->sp; #endif diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c index 04df67f8a7ba..044897be021f 100644 --- a/arch/x86/oprofile/backtrace.c +++ b/arch/x86/oprofile/backtrace.c @@ -76,9 +76,9 @@ void x86_backtrace(struct pt_regs * const regs, unsigned int depth) { struct frame_head *head = (struct frame_head *)frame_pointer(regs); - unsigned long stack = kernel_trap_sp(regs); if (!user_mode_vm(regs)) { + unsigned long stack = kernel_stack_pointer(regs); if (depth) dump_trace(NULL, regs, (unsigned long *)stack, 0, &backtrace_ops, &depth); From 1904b03430ade1cd621bb8b6ca8e38819a2f9267 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 9 Apr 2009 11:59:52 +0200 Subject: [PATCH 158/670] i2c-mpc: bug fix for MPC52xx clock setting and printout The clock setting did not work for the MPC52xx due to a stupid bug. Furthermore, the dev info output "clock=0" for old device trees was misleading. This patch fixes both issues. Signed-off-by: Wolfgang Grandegger Acked-by: Grant Likely Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-mpc.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 4af5c09f0e8f..dd778d7ae047 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -164,7 +164,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) return 0; } -#ifdef CONFIG_PPC_52xx +#ifdef CONFIG_PPC_MPC52xx static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { {20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23}, {28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02}, @@ -188,7 +188,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = { int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler) { - const struct mpc52xx_i2c_divider *div = NULL; + const struct mpc_i2c_divider *div = NULL; unsigned int pvr = mfspr(SPRN_PVR); u32 divider; int i; @@ -203,7 +203,7 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler) * We want to choose an FDR/DFSR that generates an I2C bus speed that * is equal to or lower than the requested speed. */ - for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) { + for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) { div = &mpc_i2c_dividers_52xx[i]; /* Old MPC5200 rev A CPUs do not support the high bits */ if (div->fdr & 0xc0 && pvr == 0x80822011) @@ -219,20 +219,23 @@ static void mpc_i2c_setclock_52xx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { - int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler); + int ret, fdr; + + ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler); + fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */ - if (fdr < 0) - fdr = 0x3f; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); - dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); + + if (ret >= 0) + dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr); } -#else /* !CONFIG_PPC_52xx */ +#else /* !CONFIG_PPC_MPC52xx */ static void mpc_i2c_setclock_52xx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { } -#endif /* CONFIG_PPC_52xx*/ +#endif /* CONFIG_PPC_MPC52xx*/ #ifdef CONFIG_FSL_SOC static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = { @@ -321,14 +324,17 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node, struct mpc_i2c *i2c, u32 clock, u32 prescaler) { - int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); + int ret, fdr; + + ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler); + fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */ - if (fdr < 0) - fdr = 0x1031; /* backward compatibility */ writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR); writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR); - dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", - clock, fdr >> 8, fdr & 0xff); + + if (ret >= 0) + dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n", + clock, fdr >> 8, fdr & 0xff); } #else /* !CONFIG_FSL_SOC */ From 89bc5d4a915dc6675961f797de91748bda87efcc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 9 Apr 2009 17:03:24 +0100 Subject: [PATCH 159/670] i2c: Enable i2c-s3c2410 for S3C64XX too This controller is also present on the S3C64xx series processors so enable the driver in Kconfig for those platforms. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a48c8aee0218..f1c6ca7e2852 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -467,7 +467,7 @@ config I2C_PXA_SLAVE config I2C_S3C2410 tristate "S3C2410 I2C Driver" - depends on ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C64XX help Say Y here to include support for I2C controller in the Samsung S3C2410 based System-on-Chip devices. From 36521c271e5f93b249329ee7f321d27825970e31 Mon Sep 17 00:00:00 2001 From: Mark Ware Date: Tue, 21 Apr 2009 22:49:02 +1000 Subject: [PATCH 160/670] i2c-cpm: Pass dev ptr to dma_*_coherent rather than NULL Recent DMA changes result in a BUG() when NULL is passed to dma_alloc_coherent in place of a device. Signed-off-by: Mark Ware [ben-linux@fluff.org: fix patch moves] Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-cpm.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 3fcf78e906db..b5db8b883615 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -531,16 +531,16 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) rbdf = cpm->rbase; for (i = 0; i < CPM_MAXBD; i++) { - cpm->rxbuf[i] = dma_alloc_coherent( - NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL); + cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev, + CPM_MAX_READ + 1, + &cpm->rxdma[i], GFP_KERNEL); if (!cpm->rxbuf[i]) { ret = -ENOMEM; goto out_muram; } out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1)); - cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent( - NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); + cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); if (!cpm->txbuf[i]) { ret = -ENOMEM; goto out_muram; @@ -585,10 +585,10 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) out_muram: for (i = 0; i < CPM_MAXBD; i++) { if (cpm->rxbuf[i]) - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->rxbuf[i], cpm->rxdma[i]); if (cpm->txbuf[i]) - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->txbuf[i], cpm->txdma[i]); } cpm_muram_free(cpm->dp_addr); @@ -619,9 +619,9 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm) /* Free all memory */ for (i = 0; i < CPM_MAXBD; i++) { - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->rxbuf[i], cpm->rxdma[i]); - dma_free_coherent(NULL, CPM_MAX_READ + 1, + dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, cpm->txbuf[i], cpm->txdma[i]); } From 8d181018532dd709ec1f789e374cda92d7b01ce1 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 8 May 2009 07:13:33 -0600 Subject: [PATCH 161/670] PCI MSI: Fix MSI-X with NIU cards The NIU device refuses to allow accesses to MSI-X registers before MSI-X is enabled. This patch fixes the problem by moving the read of the mask register to after MSI-X is enabled. Reported-by: David S. Miller Tested-by: David S. Miller Reviewed-by: David S. Miller Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- drivers/pci/msi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 6f2e6295e773..362773247fbf 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -455,8 +455,6 @@ static int msix_capability_init(struct pci_dev *dev, entry->msi_attrib.default_irq = dev->irq; entry->msi_attrib.pos = pos; entry->mask_base = base; - entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE + - PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); msix_mask_irq(entry, 1); list_add_tail(&entry->list, &dev->msi_list); @@ -493,6 +491,12 @@ static int msix_capability_init(struct pci_dev *dev, msix_set_enable(dev, 1); dev->msix_enabled = 1; + list_for_each_entry(entry, &dev->msi_list, list) { + int vector = entry->msi_attrib.entry_nr; + entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET); + } + return 0; } From 35e71f90687fd904b43e3427673827ac3e77b4d1 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Thu, 16 Apr 2009 00:25:39 -0700 Subject: [PATCH 162/670] xtensa: Fix architecture specific Kconfig Move a misplace endmenu marker to enable platform options and disable PCI and automatic calibrating for the XT2K board. The on-board PCI bridge is somewhat broken, anyway, and the calibrating relies on some whacky usage of the serial port. Signed-off-by: Chris Zankel --- arch/xtensa/Kconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index fa6dc4dd3b19..30d21a9e2ef5 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -137,6 +137,8 @@ config PCI source "drivers/pci/Kconfig" +endmenu + menu "Platform options" choice @@ -153,8 +155,6 @@ config XTENSA_PLATFORM_ISS config XTENSA_PLATFORM_XT2000 bool "XT2000" - select XTENSA_CALIBRATE_CCOUNT - select PCI help XT2000 is the name of Tensilica's feature-rich emulation platform. This hardware is capable of running a full Linux distribution. @@ -192,8 +192,6 @@ config CMDLINE source "mm/Kconfig" -endmenu - config HOTPLUG bool "Support for hot-pluggable devices" help From 7dbe5c542464a511f0ea6a14e3ff08874d7e21d5 Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Thu, 16 Apr 2009 00:28:09 -0700 Subject: [PATCH 163/670] xtensa: Fix checksum header file We need to add a "memory" dependency (barrier) in assembly macros that access (read or write) memory. Otherwise, the compiler might ill-optimize the order of memory accesses. Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/checksum.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h index f84d3f00774a..e4d831a30772 100644 --- a/arch/xtensa/include/asm/checksum.h +++ b/arch/xtensa/include/asm/checksum.h @@ -113,7 +113,8 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) are modified, we must also specify them as outputs, or gcc will assume they contain their original values. */ : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr) - : "1" (iph), "2" (ihl)); + : "1" (iph), "2" (ihl) + : "memory"); return csum_fold(sum); } @@ -227,7 +228,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, "1:\t" : "=r" (sum), "=&r" (__dummy) : "r" (saddr), "r" (daddr), - "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)); + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "memory"); return csum_fold(sum); } From 586411dcd1935f91796d5e8a29aa3cfdf01a01f4 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 11 May 2009 15:43:33 +0200 Subject: [PATCH 164/670] xtensa: always use correct stack pointer for stack traces Commit '28a0ce7 xtensa: use correct stack pointer for stack traces' changed the stack tracer from always reading the stack pointer register to always using the saved value in the task descriptor. The author was too dense to consider the fact that the saved stack value is stale for a running process und thus unusable for 'current'. What we do now is to use the stack pointer register (a1) for when the task is unknown - we can't help it then - or when the task is 'current'. For everything else use the saved stack pointer value contained in the task descriptor. Signed-off-by: Johannes Weiner Signed-off-by: Chris Zankel --- arch/xtensa/kernel/traps.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index 9f0b71189e94..ba9ab9349782 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -369,6 +369,18 @@ void show_regs(struct pt_regs * regs) regs->syscall); } +static __always_inline unsigned long *stack_pointer(struct task_struct *task) +{ + unsigned long *sp; + + if (!task || task == current) + __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp)); + else + sp = (unsigned long *)task->thread.sp; + + return sp; +} + void show_trace(struct task_struct *task, unsigned long *sp) { unsigned long a0, a1, pc; @@ -377,7 +389,7 @@ void show_trace(struct task_struct *task, unsigned long *sp) if (sp) a1 = (unsigned long)sp; else - a1 = task->thread.sp; + a1 = (unsigned long)stack_pointer(task); sp_start = a1 & ~(THREAD_SIZE-1); sp_end = sp_start + THREAD_SIZE; @@ -420,7 +432,7 @@ void show_stack(struct task_struct *task, unsigned long *sp) unsigned long *stack; if (!sp) - sp = (unsigned long *)task->thread.sp; + sp = stack_pointer(task); stack = sp; printk("\nStack: "); From 1fb137c1e33cd188b40b3c0d7283412efeeb783f Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 11 May 2009 15:43:34 +0200 Subject: [PATCH 165/670] xtensa: register gpio chip before use Platform initialization sets up the LED heartbeat that is controlled via GPIO. Requesting the GPIO pins fails, however, as the chip is only initialized later by a device_initcall(). Fix this up by exporting the initialization function. Let the platform set up the chip before it starts using it. Signed-off-by: Johannes Weiner Signed-off-by: Chris Zankel --- arch/xtensa/platforms/s6105/setup.c | 3 +++ arch/xtensa/variants/s6000/gpio.c | 3 +-- arch/xtensa/variants/s6000/include/variant/gpio.h | 6 ++++++ 3 files changed, 10 insertions(+), 2 deletions(-) create mode 100644 arch/xtensa/variants/s6000/include/variant/gpio.h diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c index ae041d5027a2..855ddeadc43d 100644 --- a/arch/xtensa/platforms/s6105/setup.c +++ b/arch/xtensa/platforms/s6105/setup.c @@ -10,6 +10,8 @@ #include #include +#include + #include void platform_halt(void) @@ -47,6 +49,7 @@ void __init platform_setup(char **cmdline) void __init platform_init(bp_tag_t *first) { + s6_gpio_init(); gpio_request(GPIO_LED1_NGREEN, "led1_green"); gpio_request(GPIO_LED1_RED, "led1_red"); gpio_direction_output(GPIO_LED1_NGREEN, 1); diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c index 33a8d952934c..79317fdcf14c 100644 --- a/arch/xtensa/variants/s6000/gpio.c +++ b/arch/xtensa/variants/s6000/gpio.c @@ -64,8 +64,7 @@ static struct gpio_chip gpiochip = { .exported = 0, /* no exporting to userspace */ }; -static int gpio_init(void) +int s6_gpio_init(void) { return gpiochip_add(&gpiochip); } -device_initcall(gpio_init); diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h new file mode 100644 index 000000000000..8327f62167eb --- /dev/null +++ b/arch/xtensa/variants/s6000/include/variant/gpio.h @@ -0,0 +1,6 @@ +#ifndef _XTENSA_VARIANT_S6000_GPIO_H +#define _XTENSA_VARIANT_S6000_GPIO_H + +extern int s6_gpio_init(void); + +#endif /* _XTENSA_VARIANT_S6000_GPIO_H */ From d15f05eb8cc4ad59699c16b8ae834b85c6d39bfe Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Mon, 11 May 2009 15:43:35 +0200 Subject: [PATCH 166/670] xtensa: fix wrong extern declaration renamed in code using it The variable ccount_nsec has been renamed to nsec_per_ccount in arch/xtensa/kernel/time.c in 2b8aea74 (2007-08-05), but the fix failed to rename the variable in arch/xtensa/include/asm/timex.h as well. Signed-off-by: Oskar Schirmer Signed-off-by: Chris Zankel --- arch/xtensa/include/asm/timex.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h index b83a8181d448..053bc4272106 100644 --- a/arch/xtensa/include/asm/timex.h +++ b/arch/xtensa/include/asm/timex.h @@ -39,9 +39,9 @@ #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT extern unsigned long ccount_per_jiffy; -extern unsigned long ccount_nsec; +extern unsigned long nsec_per_ccount; #define CCOUNT_PER_JIFFY ccount_per_jiffy -#define NSEC_PER_CCOUNT ccount_nsec +#define NSEC_PER_CCOUNT nsec_per_ccount #else #define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ)) #define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK) From b070a03f6490b0ac8d95c51b55a64e433d9160ab Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Mon, 11 May 2009 15:43:36 +0200 Subject: [PATCH 167/670] xtensa: implement ccount calibration for s6000 Calculate core frequency from timers at boot time instead of assuming a fixed frequency. This is useful as the true frequency is set up by the boot loader, thus variable. Signed-off-by: Oskar Schirmer Signed-off-by: Chris Zankel --- arch/xtensa/Kconfig | 1 + arch/xtensa/variants/s6000/Makefile | 1 + arch/xtensa/variants/s6000/delay.c | 27 +++++++++++++++++++++++++++ 3 files changed, 29 insertions(+) create mode 100644 arch/xtensa/variants/s6000/delay.c diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 30d21a9e2ef5..ebe228d02b08 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -80,6 +80,7 @@ config XTENSA_VARIANT_S6000 bool "s6000 - Stretch software configurable processor" select VARIANT_IRQ_SWITCH select ARCH_REQUIRE_GPIOLIB + select XTENSA_CALIBRATE_CCOUNT endchoice config XTENSA_UNALIGNED_USER diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile index 03b3975468bd..d83f3805130c 100644 --- a/arch/xtensa/variants/s6000/Makefile +++ b/arch/xtensa/variants/s6000/Makefile @@ -1,3 +1,4 @@ # s6000 Makefile obj-y += irq.o gpio.o +obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT) += delay.o diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c new file mode 100644 index 000000000000..54b2b573f166 --- /dev/null +++ b/arch/xtensa/variants/s6000/delay.c @@ -0,0 +1,27 @@ +#include +#include +#include +#include + +#define LOOPS 10 +void platform_calibrate_ccount(void) +{ + u32 uninitialized_var(a); + u32 uninitialized_var(u); + u32 b; + u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER; + int i = LOOPS+1; + do { + u32 t = u; + asm volatile( + "1: l32i %0, %2, 0 ;" + " beq %0, %1, 1b ;" + : "=&a"(u) : "a"(t), "a"(tstamp)); + b = xtensa_get_ccount(); + if (i == LOOPS) + a = b; + } while (--i >= 0); + b -= a; + nsec_per_ccount = (LOOPS * 10000) / b; + ccount_per_jiffy = b * (100000UL / (LOOPS * HZ)); +} From 866e514d6a584810dc3ae25364f823b890b7d312 Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Mon, 11 May 2009 15:43:37 +0200 Subject: [PATCH 168/670] xtensa: update s6105_defconfig for ccount calibration The previous patch enabled ccount calibration for the s6000 variant. This patch updates the defconfig for the s6105 platform to reflect this change. Signed-off-by: Oskar Schirmer Signed-off-by: Chris Zankel --- arch/xtensa/configs/s6105_defconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig index 6e1deff41590..768bee006037 100644 --- a/arch/xtensa/configs/s6105_defconfig +++ b/arch/xtensa/configs/s6105_defconfig @@ -115,7 +115,7 @@ CONFIG_XTENSA_VARIANT_S6000=y CONFIG_PREEMPT=y # CONFIG_MATH_EMULATION is not set # CONFIG_HIGHMEM is not set -# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set +CONFIG_XTENSA_CALIBRATE_CCOUNT=y CONFIG_SERIAL_CONSOLE=y # CONFIG_XTENSA_ISS_NETWORK is not set @@ -131,7 +131,6 @@ CONFIG_SERIAL_CONSOLE=y # CONFIG_XTENSA_PLATFORM_ISS is not set # CONFIG_XTENSA_PLATFORM_XT2000 is not set CONFIG_XTENSA_PLATFORM_S6105=y -CONFIG_XTENSA_CPU_CLOCK=300 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7" From 78f3cdfa2ac0aa2b72b3ee7e4b3c3e550230179f Mon Sep 17 00:00:00 2001 From: Chris Zankel Date: Tue, 21 Apr 2009 00:34:15 -0700 Subject: [PATCH 169/670] xtensa: Fix linker script to include .literal sections Fix resembles implementation from Marc Gauthier and Piet Denaly: In the Xtensa architecture, assembly generates literals which must always precede the code (the L32R instruction that loads them only uses negative PC-relative offsets). For any *.text section, literals are placed in a corresponding *.literal section. The linker script (vmlinux.lds) must place these in the correct order. It must also combine them, when the *.text section can be larger than L32R's 256 kB range. For example, this doesn't work: *(.literal) *(.text) because L32R instructions at the end of .text can't reach the literals. The linker can solve this if they are combined in parentheses, like this: *(.literal .text) because it is now allowed mix literals in .text to bring them in range. None of this is done by standard vmlinux.lds.h macros such as TEXT_TEXT and INIT_TEXT. To avoid replicating the logic of that header file, we instead post-process the generated linker script to convert *(xxx.text) to *(xxx.literal xxx.text) for the following text sections: .text .ref.text .*init.text .*exit.text .text.* using a sed script. To do this we must override the default rule for vmlinux.lds (see scripts/Makefile.build and the top-level Makefile) to insert this extra step. Signed-off-by: Marc Gauthier Signed-off-by: Pete Delaney Signed-off-by: Chris Zankel --- arch/xtensa/kernel/Makefile | 21 ++++++++++++++++++--- arch/xtensa/kernel/vmlinux.lds.S | 4 +--- 2 files changed, 19 insertions(+), 6 deletions(-) diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 7419dbccf027..fe3186de6a33 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -4,15 +4,30 @@ extra-y := head.o vmlinux.lds - obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \ setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \ pci-dma.o init_task.o io.o -## windowspill.o - obj-$(CONFIG_KGDB) += xtensa-stub.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o +# In the Xtensa architecture, assembly generates literals which must always +# precede the L32R instruction with a relative offset less than 256 kB. +# Therefore, the .text and .literal section must be combined in parenthesis +# in the linker script, such as: *(.literal .text). +# +# We need to post-process the generated vmlinux.lds scripts to convert +# *(xxx.text) to *(xxx.literal xxx.text) for the following text sections: +# .text .ref.text .*init.text .*exit.text .text.* +# +# Replicate rules in scripts/Makefile.build +sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g' \ + -e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g' + +quiet_cmd__cpp_lds_S = LDS $@ + cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@ + +$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE + $(call if_changed_dep,_cpp_lds_S) diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 5accf51053da..41c159cd872f 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -87,7 +87,7 @@ SECTIONS { /* The HEAD_TEXT section must be the first section! */ HEAD_TEXT - *(.literal .text) + TEXT_TEXT VMLINUX_SYMBOL(__sched_text_start) = .; *(.sched.literal .sched.text) VMLINUX_SYMBOL(__sched_text_end) = .; @@ -139,8 +139,6 @@ SECTIONS __init_begin = .; .init.text : { _sinittext = .; - *(.init.literal) *(.cpuinit.literal) - *(.devinit.literal) *(.meminit.literal) INIT_TEXT _einittext = .; } From af498d7fa3e786f52650819a56e117ed9a40920c Mon Sep 17 00:00:00 2001 From: Kazuhisa Ichikawa Date: Tue, 12 May 2009 13:27:45 +0200 Subject: [PATCH 170/670] block: fix the bio_vec array index out-of-bounds test Current bio_vec array index out-of-bounds test within __end_that_request_first() does not seem correct. It checks bio->bi_idx against bio->bi_vcnt, but the subsequent code uses idx (which is, bio->bi_idx + next_idx) as the array index into bio_vec array. This means that the test really make sense only at the first iteration of !(nr_bytes >=bio->bi_size) case (when next_idx == zero). Fix this by replacing bio->bi_idx with idx. (This patch applies to 2.6.30-rc4.) Signed-off-by: Kazuhisa Ichikawa Signed-off-by: Jens Axboe --- block/blk-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 2998fe3a2377..c89883be8737 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1768,10 +1768,10 @@ static int __end_that_request_first(struct request *req, int error, } else { int idx = bio->bi_idx + next_idx; - if (unlikely(bio->bi_idx >= bio->bi_vcnt)) { + if (unlikely(idx >= bio->bi_vcnt)) { blk_dump_rq_flags(req, "__end_that"); printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n", - __func__, bio->bi_idx, bio->bi_vcnt); + __func__, idx, bio->bi_vcnt); break; } From 05dc7b613481c695bb4fc476c6fbb46364b63f62 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 12 May 2009 13:28:23 +0200 Subject: [PATCH 171/670] viocd: needs to depend on BLOCK Fix this build error when CONFIG_BLOCK is not set: drivers/cdrom/viocd.c: In function 'viocd_blk_open': drivers/cdrom/viocd.c:156: error: dereferencing pointer to incomplete type drivers/cdrom/viocd.c: In function 'viocd_blk_release': drivers/cdrom/viocd.c:162: error: dereferencing pointer to incomplete type drivers/cdrom/viocd.c: In function 'viocd_blk_ioctl': drivers/cdrom/viocd.c:170: error: dereferencing pointer to incomplete type drivers/cdrom/viocd.c: In function 'viocd_blk_media_changed': drivers/cdrom/viocd.c:176: error: dereferencing pointer to incomplete type ... Signed-off-by: Alexander Beregalov Signed-off-by: Jens Axboe --- arch/powerpc/platforms/iseries/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig index 647e87787437..47a20cfb4486 100644 --- a/arch/powerpc/platforms/iseries/Kconfig +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -17,6 +17,7 @@ config VIODASD config VIOCD tristate "iSeries Virtual I/O CD support" + depends on BLOCK select VIOPATH help If you are running Linux on an IBM iSeries system and you want to From 34fd5dad46fc494c6ed3b174b2c991ea9961ebe9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 12 May 2009 11:33:39 +0100 Subject: [PATCH 172/670] Remove unreached code in drivers/net/mlx4/en_rx.c Remove the return after the goto. We want the goto because it frees memory as well as returning err. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/net/mlx4/en_rx.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 7942c4d3cd88..9ee873e872b3 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -951,7 +951,6 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, if (err) { mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn); goto out; - return err; } qp->event = mlx4_en_sqp_event; From f29ce72795bf335553ab972606bc576b5473995e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 12 May 2009 09:08:31 -0700 Subject: [PATCH 173/670] drm/i915: automatically select FRAMEBUFFER_CONSOLE if !EMBEDDED People keep getting bitten by this, so just auto-select it by default, assuming most configurations will actually want a console. Signed-off-by: Jesse Barnes --- drivers/gpu/drm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 3a22eb9be378..17b24c580c09 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -71,6 +71,7 @@ config DRM_I915 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB + select FRAMEBUFFER_CONSOLE if !EMBEDDED tristate "i915 driver" help Choose this option if you have a system that has Intel 830M, 845G, From d80c19df5fcceb8c741e96f09f275c2da719efef Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 12 May 2009 16:29:13 +0200 Subject: [PATCH 174/670] lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS Now that lockdep coverage has increased it has become easier to run out of entries: [ 21.401387] BUG: MAX_LOCKDEP_ENTRIES too low! [ 21.402007] turning off the locking correctness validator. [ 21.402007] Pid: 1555, comm: S99local Not tainted 2.6.30-rc5-tip #2 [ 21.402007] Call Trace: [ 21.402007] [] add_lock_to_list+0x53/0xba [ 21.402007] [] ? lookup_mnt+0x19/0x53 [ 21.402007] [] check_prev_add+0x14b/0x1c7 [ 21.402007] [] validate_chain+0x474/0x52a [ 21.402007] [] __lock_acquire+0x342/0x3c7 [ 21.402007] [] lock_acquire+0xc1/0xe5 [ 21.402007] [] ? lookup_mnt+0x19/0x53 [ 21.402007] [] _spin_lock+0x31/0x66 Double the size - as we've done in the past. [ Impact: allow lockdep to cover more locks ] Acked-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/lockdep_internals.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h index a2cc7e9a6e84..699a2ac3a0d7 100644 --- a/kernel/lockdep_internals.h +++ b/kernel/lockdep_internals.h @@ -54,9 +54,9 @@ enum { * table (if it's not there yet), and we check it for lock order * conflicts and deadlocks. */ -#define MAX_LOCKDEP_ENTRIES 8192UL +#define MAX_LOCKDEP_ENTRIES 16384UL -#define MAX_LOCKDEP_CHAINS_BITS 14 +#define MAX_LOCKDEP_CHAINS_BITS 15 #define MAX_LOCKDEP_CHAINS (1UL << MAX_LOCKDEP_CHAINS_BITS) #define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5) From 6f733a349c2b70a83b5451fbe61ef2cf67d41cdf Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 11 May 2009 09:58:19 -0700 Subject: [PATCH 175/670] ARM: OMAP: GPIO de-bounce clocks don't affect module idle state GPIO de-bounce clocks don't have any impact on the module idle state, so the clock code should not wait for the module to enable after the de-bounce clocks are enabled. Problem found by Kevin Hilman . Signed-off-by: Paul Walmsley Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 6763b8f73028..017a30e9aa1d 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = { static struct clk gpio1_dbck = { .name = "gpio1_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, @@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = { static struct clk gpio6_dbck = { .name = "gpio6_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, @@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = { static struct clk gpio5_dbck = { .name = "gpio5_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, @@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = { static struct clk gpio4_dbck = { .name = "gpio4_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, @@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = { static struct clk gpio3_dbck = { .name = "gpio3_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, @@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = { static struct clk gpio2_dbck = { .name = "gpio2_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, From eaf9393bb79a9c7c8e708669f9581ca466122430 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 12 May 2009 11:20:02 -0700 Subject: [PATCH 176/670] ARM: OMAP2: Fix tusb6010 init error and compilation warning Fix "tusb6010 init error 5, -19" and compilation warning from function tusb6010_platform_retime "warning: 'sysclk_ps' is used uninitialized in this function". I suppose commit c094ba34b8f780885d029ce3c2715a194b780e5d was meant to test for zero fclk_ps instead of sysclk_ps. Signed-off-by: Jarkko Nikula Cc: Roel Kluin Tested-by: Kalle Valo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/usb-tusb6010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8df55f40f4c0..8622c24cd270 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec || sysclk_ps == 0) + if (!refclk_psec || fclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; From c8a799b03a981b4b27d8fd7320c96cfbe781b2fb Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 12 May 2009 11:20:02 -0700 Subject: [PATCH 177/670] ARM: OMAP2: Fix SPI driver failure on 2420 when running multi-omap config SPI driver will do unhandled fault on OMAP2420 if trying to probe non-existing SPI busses. Register those additional busses runtime only for cpus having them. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 496983ade97e..894cc355818a 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -354,10 +354,12 @@ static void omap_init_mcspi(void) platform_device_register(&omap2_mcspi1); platform_device_register(&omap2_mcspi2); #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) - platform_device_register(&omap2_mcspi3); + if (cpu_is_omap2430() || cpu_is_omap343x()) + platform_device_register(&omap2_mcspi3); #endif #ifdef CONFIG_ARCH_OMAP3 - platform_device_register(&omap2_mcspi4); + if (cpu_is_omap343x()) + platform_device_register(&omap2_mcspi4); #endif } From 4ea60b0c7a8487af5de736d394b147baf7691f3c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 12 May 2009 11:20:03 -0700 Subject: [PATCH 178/670] ARM: OMAP2/3: Add name for musb clocks With the clkdev, musb_core.c needs to register clock with name "ick". Once all the platforms using the musb driver have been converted to use clockdev, the clock name does not need to be passed from the low-level init code. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock24xx.c | 2 +- arch/arm/mach-omap2/clock34xx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index efc59c49341b..ff9b4c0b00ae 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 0a14dca31e30..a0575393d0ea 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), From 9c1ee184a30394e54165fa4c15923cabd952c106 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 13 May 2009 18:36:58 -0400 Subject: [PATCH 179/670] ext4: Fix sub-block zeroing for writes into preallocated extents We need to mark the buffer_head mapping preallocated space as new during write_begin. Otherwise we don't zero out the page cache content properly for a partial write. This will cause file corruption with preallocation. Now that we mark the buffer_head new we also need to have a valid buffer_head blocknr so that unmap_underlying_metadata() unmaps the correct block. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 2 ++ fs/ext4/inode.c | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index e40332158340..172656c2a3bd 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2875,6 +2875,8 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, if (allocated > max_blocks) allocated = max_blocks; set_buffer_unwritten(bh_result); + bh_result->b_bdev = inode->i_sb->s_bdev; + bh_result->b_blocknr = newblock; goto out2; } diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index e91f978c7f12..d4b634ae06bd 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2323,6 +2323,13 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, set_buffer_delay(bh_result); } else if (ret > 0) { bh_result->b_size = (ret << inode->i_blkbits); + /* + * With sub-block writes into unwritten extents + * we also need to mark the buffer as new so that + * the unwritten parts of the buffer gets correctly zeroed. + */ + if (buffer_unwritten(bh_result)) + set_buffer_new(bh_result); ret = 0; } From 33b9817e2ae097c7b8d256e3510ac6c54fc6d9d0 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Tue, 12 May 2009 14:40:37 -0400 Subject: [PATCH 180/670] ext4: Use a fake block number for delayed new buffer_head Use a very large unsigned number (~0xffff) as as the fake block number for the delayed new buffer. The VFS should never try to write out this number, but if it does, this will make it obvious. Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index d4b634ae06bd..0ac31a06422b 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2297,6 +2297,10 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create) { int ret = 0; + sector_t invalid_block = ~((sector_t) 0xffff); + + if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es)) + invalid_block = ~0; BUG_ON(create == 0); BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize); @@ -2318,7 +2322,7 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, /* not enough space to reserve */ return ret; - map_bh(bh_result, inode->i_sb, 0); + map_bh(bh_result, inode->i_sb, invalid_block); set_buffer_new(bh_result); set_buffer_delay(bh_result); } else if (ret > 0) { From 7348d82a67b3fe0363e7f0679b50ecbdc65116c7 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Tue, 12 May 2009 13:19:36 -0700 Subject: [PATCH 181/670] pxa2xx_spi: prevent panic case setup() fails setup() may fail before ctldata is set, causing a kernel panic on cleanup(). Signed-off-by: Daniel Ribeiro Signed-off-by: David Brownell Cc: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 885194a07418..3f3c08c6ba4e 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1373,6 +1373,9 @@ static void cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata(spi); + if (!chip) + return; + if (gpio_is_valid(chip->gpio_cs)) gpio_free(chip->gpio_cs); From ecf4667d30dd63fa130e22f8f2da3e6ce003358b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 12 May 2009 13:19:37 -0700 Subject: [PATCH 182/670] syscalls.h add the missing sys_pipe2 declaration In order to build the generic syscall table, we need a declaration for every system call. sys_pipe2 was added without a proper declaration, so add this to syscalls.h now. Signed-off-by: Arnd Bergmann Cc: Ulrich Drepper Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/syscalls.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 40617c1d8976..30520844b8da 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -433,6 +433,7 @@ asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg); asmlinkage long sys_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg); #endif +asmlinkage long sys_pipe2(int __user *fildes, int flags); asmlinkage long sys_dup(unsigned int fildes); asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd); asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags); From f993004d73f266a02f3ac736fafb033c600972d9 Mon Sep 17 00:00:00 2001 From: Kim Kyuwon Date: Tue, 12 May 2009 13:19:38 -0700 Subject: [PATCH 183/670] rtc: rtc-twl4030 don't mask alarm interrupts on suspend This patch enables the alarm interrupt of TWL4030 RTC to wake up the system from suspend. You can test this patch with following command. # echo +10 > /sys/class/rtc/rtc0/wakealarm; echo mem > /sys/power/state; Signed-off-by: Kim Kyuwon Acked-by: David Brownell Cc: Kyungmin Park Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-twl4030.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c index a6341e4f9a0f..9c8c70c497dc 100644 --- a/drivers/rtc/rtc-twl4030.c +++ b/drivers/rtc/rtc-twl4030.c @@ -495,9 +495,7 @@ static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) { irqstat = rtc_irq_bits; - /* REVISIT alarm may need to wake us from sleep */ - mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | - BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); return 0; } From 9aa7a7d5daa7e33d7e7656bffe76af67c1bf56d2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 12 May 2009 13:19:39 -0700 Subject: [PATCH 184/670] alpha: unbreak percpu again Commit 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e ("FRV: Fix the section attribute on UP DECLARE_PER_CPU()") cleaned up DECLARE/DEFINE_PER_CPU() macros and in the process made alpha percpu.h include include/asm-generic/percpu.h which breaks compilation due to duplicate definitions. Remove inclusion of generic asm helper file and define whatever necessary in alpha header proper. In the longer term, percpu definitions will be unified and all these little subtlties will be removed. Signed-off-by: Tejun Heo Cc: Ivan Kokshaysky Cc: David Howells Cc: Andrew Morton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/percpu.h | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index e9e0bb5a23bf..06c5c7a4afd3 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -1,7 +1,9 @@ #ifndef __ALPHA_PERCPU_H #define __ALPHA_PERCPU_H + #include #include +#include /* * Determine the real variable name from the name visible in the @@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #endif /* SMP */ -#include +#ifdef CONFIG_SMP +#define PER_CPU_BASE_SECTION ".data.percpu" +#else +#define PER_CPU_BASE_SECTION ".data" +#endif + +#ifdef CONFIG_SMP + +#ifdef MODULE +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#else +#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" +#endif +#define PER_CPU_FIRST_SECTION ".first" + +#else + +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#define PER_CPU_FIRST_SECTION "" + +#endif + +#define PER_CPU_ATTRIBUTES #endif /* __ALPHA_PERCPU_H */ From ee83126bb17f6216e8815a4146e80032b4d80ba4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 12 May 2009 13:19:41 -0700 Subject: [PATCH 185/670] fbdev: remove outdated advice about I2C configuration The required I2C modules are now selected automatically by the means of select statements in Kconfig, so there is no point in confusing the users with options he/she would be supposed to enable manually. Signed-off-by: Jean Delvare Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 7826bdce4bbe..0048f1185a60 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1128,13 +1128,6 @@ config FB_INTEL 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. Say Y if you have and plan to use such a board. - If you say Y here and want DDC/I2C support you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section. - - If you say M here then "I2C support" and "I2C bit-banging support" - can be build either as modules or built-in. - To compile this driver as a module, choose M here: the module will be called intelfb. @@ -1207,11 +1200,10 @@ config FB_MATROX_G pixel and 32 bpp packed pixel. You can also use font widths different from 8. - If you need support for G400 secondary head, you must first say Y to - "I2C support" in the character devices section, and then to - "Matrox I2C support" and "G400 second head support" here in the - framebuffer section. G450/G550 secondary head and digital output - are supported without additional modules. + If you need support for G400 secondary head, you must say Y to + "Matrox I2C support" and "G400 second head support" right below. + G450/G550 secondary head and digital output are supported without + additional modules. The driver starts in monitor mode. You must use the matroxset tool (available at ) to @@ -1310,13 +1302,6 @@ config FB_RADEON a framebuffer device. There are both PCI and AGP versions. You don't need to choose this to run the Radeon in plain VGA mode. - If you say Y here and want DDC/I2C support you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section. - - If you say M here then "I2C support" and "I2C bit-banging support" - can be build either as modules or built-in. - There is a product page at http://apps.ati.com/ATIcompare/ From ee1ef82c7e6d073f881952348960bbc639687482 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Tue, 12 May 2009 13:19:42 -0700 Subject: [PATCH 186/670] viafb: make it work on x86_64 Fix a bug in viafb on x86_64 builds (e.g. for VIA Nano CPU). You cannot make the assumption that sizeof(unsigned int) == sizeof(unsigned long), so the parsing of the default mode (640x480) fails, leading to a division by zero during insmod of the driver. Signed-off-by: Harald Welte Cc: Cc: Cc: Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/via/viafbdev.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index e327b84820d2..a0fec298216e 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -2103,7 +2103,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry) static int __devinit via_pci_probe(void) { - unsigned int default_xres, default_yres; + unsigned long default_xres, default_yres; char *tmpc, *tmpm; char *tmpc_sec, *tmpm_sec; int vmode_index; @@ -2196,8 +2196,8 @@ static int __devinit via_pci_probe(void) viafb_FB_MM = viaparinfo->fbmem_virt; tmpm = viafb_mode; tmpc = strsep(&tmpm, "x"); - strict_strtoul(tmpc, 0, (unsigned long *)&default_xres); - strict_strtoul(tmpm, 0, (unsigned long *)&default_yres); + strict_strtoul(tmpc, 0, &default_xres); + strict_strtoul(tmpm, 0, &default_yres); vmode_index = viafb_get_mode_index(default_xres, default_yres, 0); DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index); From bfe3891a5f5d3b78146a45f40e435d14f5ae39dd Mon Sep 17 00:00:00 2001 From: Davide Libenzi Date: Tue, 12 May 2009 13:19:44 -0700 Subject: [PATCH 187/670] epoll: fix size check in epoll_create() Fix a size check WRT the manual pages. This was inadvertently broken by commit 9fe5ad9c8cef9ad5873d8ee55d1cf00d9b607df0 ("flag parameters add-on: remove epoll_create size param"). Signed-off-by: Davide Libenzi Cc: Cc: rohit verma Cc: Ulrich Drepper Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index a89f370fadb5..5458e80fc558 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1212,7 +1212,7 @@ SYSCALL_DEFINE1(epoll_create1, int, flags) SYSCALL_DEFINE1(epoll_create, int, size) { - if (size < 0) + if (size <= 0) return -EINVAL; return sys_epoll_create1(0); From 4f005dbe5584fe54c9f6d6d4f0acd3fb29be84da Mon Sep 17 00:00:00 2001 From: Maciej Sosnowski Date: Thu, 23 Apr 2009 12:31:51 +0200 Subject: [PATCH 188/670] ioatdma: fix "ioatdma frees DMA memory with wrong function" as reported by Alexander Beregalov ioatdma 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000007f76f800] [size=2000 bytes] [map ped as single] [unmapped as page] The ioatdma driver was unmapping all regions (either allocated as page or single) using unmap_page. This patch lets dma driver recognize if unmap_single or unmap_page should be used. It introduces two new dma control flags: DMA_COMPL_SRC_UNMAP_SINGLE and DMA_COMPL_DEST_UNMAP_SINGLE. They should be set to indicate dma driver to do dma-unmapping as single (first one for the source, tha latter for the destination). If respective flag is not set, the driver assumes dma-unmapping as page. Signed-off-by: Maciej Sosnowski Reported-by: Alexander Beregalov Tested-by: Alexander Beregalov Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 17 ++++++++++------ drivers/dma/ioat_dma.c | 43 ++++++++++++++++++++++++--------------- include/linux/dmaengine.h | 6 ++++++ 3 files changed, 44 insertions(+), 22 deletions(-) diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 92438e9dacc3..5a87384ea4ff 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -804,11 +804,14 @@ dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE); dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK | + DMA_COMPL_SRC_UNMAP_SINGLE | + DMA_COMPL_DEST_UNMAP_SINGLE; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); @@ -850,11 +853,12 @@ dma_async_memcpy_buf_to_pg(struct dma_chan *chan, struct page *page, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE); dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK | DMA_COMPL_SRC_UNMAP_SINGLE; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); @@ -898,12 +902,13 @@ dma_async_memcpy_pg_to_pg(struct dma_chan *chan, struct page *dest_pg, dma_addr_t dma_dest, dma_src; dma_cookie_t cookie; int cpu; + unsigned long flags; dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE); dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len, DMA_FROM_DEVICE); - tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, - DMA_CTRL_ACK); + flags = DMA_CTRL_ACK; + tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags); if (!tx) { dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE); diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index e4fc33c1c32f..1955ee8d6d20 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -1063,22 +1063,31 @@ static void ioat_dma_cleanup_tasklet(unsigned long data) static void ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc) { - /* - * yes we are unmapping both _page and _single - * alloc'd regions with unmap_page. Is this - * *really* that bad? - */ - if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) - pci_unmap_page(ioat_chan->device->pdev, - pci_unmap_addr(desc, dst), - pci_unmap_len(desc, len), - PCI_DMA_FROMDEVICE); + if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + pci_unmap_single(ioat_chan->device->pdev, + pci_unmap_addr(desc, dst), + pci_unmap_len(desc, len), + PCI_DMA_FROMDEVICE); + else + pci_unmap_page(ioat_chan->device->pdev, + pci_unmap_addr(desc, dst), + pci_unmap_len(desc, len), + PCI_DMA_FROMDEVICE); + } - if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) - pci_unmap_page(ioat_chan->device->pdev, - pci_unmap_addr(desc, src), - pci_unmap_len(desc, len), - PCI_DMA_TODEVICE); + if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + pci_unmap_single(ioat_chan->device->pdev, + pci_unmap_addr(desc, src), + pci_unmap_len(desc, len), + PCI_DMA_TODEVICE); + else + pci_unmap_page(ioat_chan->device->pdev, + pci_unmap_addr(desc, src), + pci_unmap_len(desc, len), + PCI_DMA_TODEVICE); + } } /** @@ -1363,6 +1372,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device) int err = 0; struct completion cmp; unsigned long tmo; + unsigned long flags; src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL); if (!src) @@ -1392,8 +1402,9 @@ static int ioat_dma_self_test(struct ioatdma_device *device) DMA_TO_DEVICE); dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE, DMA_FROM_DEVICE); + flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE; tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src, - IOAT_TEST_SIZE, 0); + IOAT_TEST_SIZE, flags); if (!tx) { dev_err(&device->pdev->dev, "Self-test prep failed, disabling\n"); diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 2e2aa3df170c..ffefba81c818 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -78,12 +78,18 @@ enum dma_transaction_type { * dependency chains * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s) * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s) + * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single + * (if not set, do the source dma-unmapping as page) + * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single + * (if not set, do the destination dma-unmapping as page) */ enum dma_ctrl_flags { DMA_PREP_INTERRUPT = (1 << 0), DMA_CTRL_ACK = (1 << 1), DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2), DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3), + DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4), + DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5), }; /** From ad567ffb32f067b30606071eb568cf637fe42185 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 12 May 2009 09:16:29 +0200 Subject: [PATCH 189/670] dma: fix ipu_idmac.c to not discard the last queued buffer This also fixes the case of a single queued buffer, for example, when taking a single frame snapshot with the mx3_camera driver. Reported-by: Agustin Ferrin Pozuelo Tested-by: Agustin Ferrin Pozuelo Signed-off-by: Guennadi Liakhovetski Signed-off-by: Dan Williams --- drivers/dma/ipu/ipu_idmac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 3a4deea78a71..9a5bc1a7389e 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1272,7 +1272,8 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id) /* Other interrupts do not interfere with this channel */ spin_lock(&ichan->lock); if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 && - ((curbuf >> chan_id) & 1) == ichan->active_buffer)) { + ((curbuf >> chan_id) & 1) == ichan->active_buffer && + !list_is_last(ichan->queue.next, &ichan->queue))) { int i = 100; /* This doesn't help. See comment in ipu_disable_channel() */ From a37b06d589f2c687a38d07569f4ef97c650fde39 Mon Sep 17 00:00:00 2001 From: Doug Chapman Date: Wed, 13 May 2009 02:56:39 +0100 Subject: [PATCH 190/670] Squashfs: fix breakage when page size > metadata block size Squashfs is broken on any system where the page size is larger than the metadata size (8192). This is easily fixed by ensuring cache->pages is always > 0. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Doug Chapman Signed-off-by: Andrew Morton Signed-off-by: Phillip Lougher --- fs/squashfs/cache.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c index 1c4739e33af6..40c98fa6b5d6 100644 --- a/fs/squashfs/cache.c +++ b/fs/squashfs/cache.c @@ -252,6 +252,7 @@ struct squashfs_cache *squashfs_cache_init(char *name, int entries, cache->entries = entries; cache->block_size = block_size; cache->pages = block_size >> PAGE_CACHE_SHIFT; + cache->pages = cache->pages ? cache->pages : 1; cache->name = name; cache->num_waiters = 0; spin_lock_init(&cache->lock); From fffb47b80e8bb3f171ef02b90b1ae22c63983979 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Wed, 13 May 2009 02:59:26 +0100 Subject: [PATCH 191/670] Squashfs: check page size is not larger than the filesystem block size Normally the block size (by default 128K) will be larger than the page size, unless a non-standard block size has been specified in Mksquashfs, and the page size is larger than 4K. Signed-off-by: Phillip Lougher --- fs/squashfs/super.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c index ffa6edcd2d0c..0adc624c956f 100644 --- a/fs/squashfs/super.c +++ b/fs/squashfs/super.c @@ -157,6 +157,16 @@ static int squashfs_fill_super(struct super_block *sb, void *data, int silent) if (msblk->block_size > SQUASHFS_FILE_MAX_SIZE) goto failed_mount; + /* + * Check the system page size is not larger than the filesystem + * block size (by default 128K). This is currently not supported. + */ + if (PAGE_CACHE_SIZE > msblk->block_size) { + ERROR("Page size > filesystem block size (%d). This is " + "currently not supported!\n", msblk->block_size); + goto failed_mount; + } + msblk->block_log = le16_to_cpu(sblk->block_log); if (msblk->block_log > SQUASHFS_FILE_MAX_LOG) goto failed_mount; From e5d287539dba264a1d9d7607a25b8c8c61c9d658 Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Wed, 13 May 2009 03:25:20 +0100 Subject: [PATCH 192/670] Squashfs: cody tidying, remove commented out line in Makefile Signed-off-by: Phillip Lougher --- fs/squashfs/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile index 8258cf9a0317..70e3244fa30f 100644 --- a/fs/squashfs/Makefile +++ b/fs/squashfs/Makefile @@ -5,4 +5,3 @@ obj-$(CONFIG_SQUASHFS) += squashfs.o squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o squashfs-y += namei.o super.o symlink.o -#squashfs-y += squashfs2_0.o From 44408ad7368906c84000e87a99c14a16dbb867fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 12 May 2009 13:31:40 -0700 Subject: [PATCH 193/670] xen: use header for EXPORT_SYMBOL_GPL mmu.c needs to #include module.h to prevent these warnings: arch/x86/xen/mmu.c:239: warning: data definition has no type or storage class arch/x86/xen/mmu.c:239: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/xen/mmu.c:239: warning: parameter names (without types) in function declaration [ Impact: cleanup ] Signed-off-by: Randy Dunlap Acked-by: Jeremy Fitzhardinge Signed-off-by: Andrew Morton LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index e25a78e1113a..fba55b1a4021 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include From f2deae9d4e70793568ef9e85d227abb7bef5b622 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 13 May 2009 15:56:10 +0100 Subject: [PATCH 194/670] Remove implementation of readpage from the hugetlbfs_aops The core VM assumes the page size used by the address_space in inode->i_mapping is PAGE_SIZE but hugetlbfs breaks this assumption by inserting pages into the page cache at offsets the core VM considers unexpected. This would not be a problem except that hugetlbfs also provide a ->readpage implementation. As it exists, the core VM can assume the base page size is being used, allocate pages on behalf of the filesystem, insert them into the page cache and call ->readpage to populate them. These pages are the wrong size and at the wrong offset for hugetlbfs causing confusion. This patch deletes the ->readpage implementation for hugetlbfs on the grounds the core VM should not be allocating and populating pages on behalf of hugetlbfs. There should be no existing users of the ->readpage implementation so it should not cause a regression. Signed-off-by: Mel Gorman Signed-off-by: Linus Torvalds --- fs/hugetlbfs/inode.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index 153d9681192b..c1462d43e721 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -312,16 +312,6 @@ out: return retval; } -/* - * Read a page. Again trivial. If it didn't already exist - * in the page cache, it is zero-filled. - */ -static int hugetlbfs_readpage(struct file *file, struct page * page) -{ - unlock_page(page); - return -EINVAL; -} - static int hugetlbfs_write_begin(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned flags, @@ -701,7 +691,6 @@ static void hugetlbfs_destroy_inode(struct inode *inode) } static const struct address_space_operations hugetlbfs_aops = { - .readpage = hugetlbfs_readpage, .write_begin = hugetlbfs_write_begin, .write_end = hugetlbfs_write_end, .set_page_dirty = hugetlbfs_set_page_dirty, From 0f181328287db30671e9997329cff71395d4af8b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 13 May 2009 08:29:12 -0700 Subject: [PATCH 195/670] Revert "Ignore madvise(MADV_WILLNEED) for hugetlbfs-backed regions" This reverts commit a425a638c858fd10370b573bde81df3ba500e271. Now that the previous commit removed the "readpage" actor for hugetlb files, read-ahead will no longer mess up the mapping, and there's no longer any reason to treat hugetlbfs mappings specially. Tested-and-acked-by: Mel Gorman Signed-off-by: Linus Torvalds --- mm/madvise.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/mm/madvise.c b/mm/madvise.c index 36d6ea2b6340..b9ce574827c8 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -112,14 +112,6 @@ static long madvise_willneed(struct vm_area_struct * vma, if (!file) return -EBADF; - /* - * Page cache readahead assumes page cache pages are order-0 which - * is not the case for hugetlbfs. Do not give a bad return value - * but ignore the advice. - */ - if (vma->vm_flags & VM_HUGETLB) - return 0; - if (file->f_mapping->a_ops->get_xip_mem) { /* no bad return value, but ignore advice */ return 0; From aa512a27e9e8ed32f31b15eec67ab1ceca33839b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 13 May 2009 13:52:19 -0400 Subject: [PATCH 196/670] x86/function-graph: fix constraint for recording old return value After upgrading from gcc 4.2.2 to 4.4.0, the function graph tracer broke. Investigating, I found that in the asm that replaces the return value, gcc was using the same register for the old value as it was for the new value. mov (addr), old mov new, (addr) But if old and new are the same register, we clobber new with old! I first thought this was a bug in gcc 4.4.0 and reported it: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40132 Andrew Pinski responded (quickly), saying that it was correct gcc behavior and the code needed to denote old as an "early clobber". Instead of "=r"(old), we need "=&r"(old). [Impact: keep function graph tracer from breaking with gcc 4.4.0 ] Signed-off-by: Steven Rostedt --- arch/x86/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 18dfa30795c9..b79c5533c421 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -442,7 +442,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) _ASM_EXTABLE(1b, 4b) _ASM_EXTABLE(2b, 4b) - : [old] "=r" (old), [faulted] "=r" (faulted) + : [old] "=&r" (old), [faulted] "=r" (faulted) : [parent] "r" (parent), [return_hooker] "r" (return_hooker) : "memory" ); From fa0b5596a69795c2cc4c937b35ee1b7a40bf9462 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:24:24 -0500 Subject: [PATCH 197/670] powerpc/83xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/asp8347_defconfig | 104 +++++++++++----- .../configs/83xx/mpc8313_rdb_defconfig | 114 ++++++++++++----- .../configs/83xx/mpc8315_rdb_defconfig | 114 ++++++++++++----- .../configs/83xx/mpc832x_mds_defconfig | 107 ++++++++++++---- .../configs/83xx/mpc832x_rdb_defconfig | 113 ++++++++++++----- .../configs/83xx/mpc834x_itx_defconfig | 108 +++++++++++----- .../configs/83xx/mpc834x_itxgp_defconfig | 108 +++++++++++----- .../configs/83xx/mpc834x_mds_defconfig | 103 ++++++++++++---- .../configs/83xx/mpc836x_mds_defconfig | 108 ++++++++++++---- .../configs/83xx/mpc836x_rdk_defconfig | 96 +++++++++++---- .../configs/83xx/mpc837x_mds_defconfig | 104 ++++++++++++---- .../configs/83xx/mpc837x_rdb_defconfig | 111 ++++++++++++----- arch/powerpc/configs/83xx/sbc834x_defconfig | 96 +++++++++++---- arch/powerpc/configs/mpc83xx_defconfig | 115 +++++++++++++----- 14 files changed, 1115 insertions(+), 386 deletions(-) diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index fc4a39a40e72..278939713775 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:47 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:05 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_ALTIVEC is not set @@ -57,6 +58,7 @@ CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,16 +124,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_ASP834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -469,7 +483,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -499,13 +512,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -532,6 +552,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -565,6 +586,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -584,6 +607,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -594,11 +618,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -608,7 +633,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -759,12 +783,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -796,6 +817,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -810,11 +832,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -959,11 +984,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_LIBUSUAL is not set @@ -991,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1006,6 +1030,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1067,8 +1092,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1079,6 +1105,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1100,6 +1127,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1154,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1166,7 +1199,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1233,6 +1265,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1248,11 +1281,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1274,13 +1308,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1309,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1381,6 +1428,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 409d017621a8..c5c0fe71a438 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:48 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:06 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -481,7 +495,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -600,6 +623,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -626,6 +650,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -660,6 +685,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -697,6 +724,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -707,11 +735,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -721,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -730,6 +760,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -737,7 +768,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -815,6 +845,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -827,6 +858,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -889,12 +921,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -914,7 +943,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -942,6 +970,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -957,12 +986,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -981,6 +1013,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -1077,7 +1110,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1135,11 +1167,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1181,7 +1213,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1228,6 +1259,7 @@ CONFIG_USB_ETH_RNDIS=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1296,8 +1328,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1308,6 +1341,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1329,6 +1363,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1383,6 +1422,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1395,7 +1435,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1427,6 +1466,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1442,11 +1482,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1464,6 +1505,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1493,9 +1537,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1503,17 +1550,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1544,10 +1593,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1616,6 +1667,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 03db97c6cf33..af4952feba36 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:49 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:06 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y CONFIG_PPC_MPC831x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -481,7 +495,6 @@ CONFIG_MTD_NAND_IDS=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -601,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +711,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -721,6 +746,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -758,6 +785,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -768,11 +796,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -782,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -791,6 +821,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -798,7 +829,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -876,6 +906,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -888,6 +919,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -950,12 +982,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -975,7 +1004,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -1003,6 +1031,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1018,12 +1047,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1042,6 +1074,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -1138,7 +1171,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1196,11 +1228,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1242,7 +1274,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1289,6 +1320,7 @@ CONFIG_USB_ETH_RNDIS=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1357,8 +1389,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1369,6 +1402,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1390,6 +1424,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1444,6 +1483,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1456,7 +1496,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1488,6 +1527,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1503,11 +1543,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1525,6 +1566,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1554,9 +1598,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1564,17 +1611,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1605,10 +1654,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1677,6 +1728,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index fb17de53cc02..8c8f660b4fc7 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:50 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:07 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC832x_MDS=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -411,13 +425,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -475,9 +496,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -515,6 +539,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -548,6 +573,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -567,6 +594,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -577,14 +605,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -594,6 +623,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -603,6 +633,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -610,7 +641,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -692,6 +722,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -753,12 +784,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -790,6 +818,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -804,11 +833,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -906,7 +938,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -920,7 +951,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -988,8 +1019,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1000,6 +1032,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1021,6 +1054,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1064,6 +1102,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1076,7 +1115,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1106,6 +1144,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1119,11 +1158,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1145,13 +1186,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1180,10 +1232,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1252,6 +1306,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index a012ce235203..227dbba76795 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:52 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:08 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC832x_RDB=y CONFIG_PPC_MPC832x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -413,13 +427,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -477,9 +499,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -501,6 +525,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -517,6 +542,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -551,6 +577,8 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -570,6 +598,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -580,14 +609,15 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -597,6 +627,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -606,6 +637,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -613,7 +645,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -691,6 +722,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -704,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -768,12 +801,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -792,7 +822,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -820,6 +849,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -835,12 +865,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -859,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -955,7 +989,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1012,11 +1045,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1058,7 +1091,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1074,6 +1106,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1101,6 +1134,7 @@ CONFIG_MMC_SPI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1111,6 +1145,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1132,6 +1167,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1178,6 +1218,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1190,7 +1231,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1264,6 +1304,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1277,11 +1318,13 @@ CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1303,13 +1346,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1338,10 +1392,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1410,6 +1466,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 4bcc4a1ff308..24ee7fcac87e 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:53 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:09 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -608,9 +629,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -633,6 +656,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -720,6 +744,7 @@ CONFIG_MD_RAID1=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -755,6 +780,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -765,11 +791,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -779,6 +806,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -788,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -795,7 +824,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -853,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -865,6 +894,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -927,12 +957,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -951,7 +978,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -1083,11 +1109,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1128,7 +1154,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1144,6 +1169,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1212,8 +1238,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1224,6 +1251,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1245,6 +1273,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1292,6 +1325,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1304,7 +1338,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1375,6 +1408,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1388,11 +1422,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1414,13 +1450,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1449,10 +1496,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,6 +1570,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 9ba5518ce8df..7f39543205a9 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:55 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:10 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -560,9 +581,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -584,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -635,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -645,11 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -659,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -668,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -675,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -733,6 +761,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -745,6 +774,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -807,12 +837,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -831,7 +858,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -963,11 +989,11 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1008,7 +1034,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1023,6 +1048,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1091,8 +1117,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1103,6 +1130,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1124,6 +1152,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1171,6 +1204,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1183,7 +1217,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1254,6 +1287,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1267,11 +1301,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1293,13 +1329,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1328,10 +1375,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1400,6 +1449,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 18e4bc0b3c11..1cd1fcac22c8 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:56 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:11 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC834x_MDS=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -443,6 +464,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -476,6 +498,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -513,6 +537,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -523,11 +548,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -537,6 +563,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -546,6 +573,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -553,7 +581,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -694,12 +721,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -731,6 +755,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -745,11 +770,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -847,7 +875,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -861,7 +888,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -929,8 +956,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -941,6 +969,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -962,6 +991,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1005,6 +1039,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1017,7 +1052,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1045,6 +1079,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1058,11 +1093,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1084,13 +1121,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1119,10 +1167,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1191,6 +1241,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 76db8138eac7..ce5177393a0d 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:58 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:12 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,16 +123,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,6 +191,8 @@ CONFIG_MPC836x_MDS=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -271,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -293,7 +308,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -349,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -361,7 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -464,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -493,13 +506,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -557,9 +577,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -581,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -597,6 +620,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -630,6 +654,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -649,6 +675,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -659,14 +686,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -676,6 +704,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -685,6 +714,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -692,7 +722,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -774,6 +803,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -835,12 +865,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -872,6 +899,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -886,11 +914,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1019,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1032,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1070,8 +1100,9 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1082,6 +1113,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1103,6 +1135,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1147,6 +1184,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1159,7 +1197,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1189,6 +1226,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1202,11 +1240,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1228,13 +1268,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1263,10 +1314,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1335,6 +1388,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index 0dc11c44306b..7f1d1383a249 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:01 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:13 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -57,6 +58,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -110,16 +124,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,6 +192,8 @@ CONFIG_MPC836x_RDK=y # CONFIG_ASP834x is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -295,7 +310,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -475,7 +489,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -506,13 +519,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -539,6 +560,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -574,6 +596,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -584,14 +607,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -601,7 +625,6 @@ CONFIG_UCC_GETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -673,6 +696,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -686,6 +710,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -749,12 +774,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -774,7 +796,6 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -924,6 +945,7 @@ CONFIG_FB_OF=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -956,7 +978,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -967,6 +988,7 @@ CONFIG_HID_COMPAT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -977,6 +999,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -998,6 +1021,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1052,6 +1080,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1064,7 +1093,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1095,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_UCC_SLOW=y CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1110,11 +1139,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1136,13 +1166,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1182,10 +1223,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1254,6 +1297,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index e42f6b3917d2..bf636fd560ad 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:59 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:12 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_MPC837x_MDS=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -474,9 +495,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -575,6 +599,7 @@ CONFIG_ATA_SFF=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -608,6 +633,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -637,11 +665,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -651,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -660,6 +690,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -667,7 +698,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -811,12 +841,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +875,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -862,11 +890,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -964,7 +995,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,7 +1008,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -994,6 +1024,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1004,6 +1035,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1025,6 +1057,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1068,6 +1105,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1080,7 +1118,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1112,6 +1149,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1125,11 +1163,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1149,13 +1189,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1184,10 +1235,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1256,6 +1309,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 408022f79a50..fe6454eacbdb 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:01 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:14 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -184,6 +193,8 @@ CONFIG_MPC837x_RDB=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -357,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -406,13 +420,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -469,9 +490,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -494,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -563,7 +587,7 @@ CONFIG_MD_AUTODETECT=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -581,6 +605,7 @@ CONFIG_MD_RAID5_RESHAPE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -614,6 +639,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -633,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -643,11 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -657,7 +686,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -811,12 +839,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +873,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -862,11 +888,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -976,15 +1005,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1050,11 +1081,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1084,7 +1115,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1099,6 +1129,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1108,6 +1139,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1118,6 +1150,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1139,6 +1172,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1182,6 +1220,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1194,7 +1233,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1226,6 +1264,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1239,11 +1278,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1263,13 +1304,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1302,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1374,6 +1428,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index a0c42fb65cb9..fe08f672cb27 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:02 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:15 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,16 +122,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,18 +162,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,6 +191,8 @@ CONFIG_SBC834x=y CONFIG_PPC_MPC834x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -242,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -270,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -292,7 +307,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -348,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -360,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -408,13 +422,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -441,6 +462,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -474,6 +496,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -493,6 +517,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -503,11 +528,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -517,7 +543,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -660,12 +685,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -697,6 +719,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -711,11 +734,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -813,7 +839,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -824,6 +849,7 @@ CONFIG_HID_COMPAT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -848,6 +874,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -891,6 +922,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -903,7 +935,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -919,6 +950,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -932,11 +964,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -956,13 +990,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -991,10 +1036,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1063,6 +1110,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 45f03cad8db6..433c303eb82b 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:36 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:58 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_FSL_EMB_PERFMON is not set # CONFIG_ALTIVEC is not set @@ -58,6 +59,7 @@ CONFIG_REDBOOT=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,10 +125,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -150,18 +166,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -189,6 +198,8 @@ CONFIG_PPC_MPC834x=y CONFIG_PPC_MPC837x=y # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y CONFIG_IPIC=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -251,9 +262,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -281,6 +295,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -303,7 +318,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -359,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -371,7 +386,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -485,7 +499,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -516,13 +529,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -580,9 +600,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -605,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -681,6 +704,7 @@ CONFIG_ATA_SFF=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -714,6 +738,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -733,6 +759,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -743,14 +770,15 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -760,6 +788,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -769,6 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -776,7 +806,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -867,6 +896,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -932,12 +962,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -992,6 +1019,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1006,11 +1034,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1121,15 +1153,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1181,6 +1215,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set @@ -1195,11 +1230,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1229,7 +1264,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1245,6 +1279,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1254,6 +1289,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1264,6 +1300,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1285,6 +1322,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1329,6 +1371,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1341,7 +1384,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1375,6 +1417,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_DLM is not set CONFIG_UCC_FAST=y CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1388,11 +1431,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1412,13 +1457,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1448,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1520,6 +1578,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # From 0ae0e7edf8c93c399b37d41e647ecc9ed13f0b9c Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:24:50 -0500 Subject: [PATCH 198/670] powerpc/85xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/ksi8560_defconfig | 86 +++- .../configs/85xx/mpc8540_ads_defconfig | 82 +++- .../configs/85xx/mpc8560_ads_defconfig | 89 +++- .../configs/85xx/mpc85xx_cds_defconfig | 88 +++- arch/powerpc/configs/85xx/sbc8548_defconfig | 84 +++- arch/powerpc/configs/85xx/sbc8560_defconfig | 83 +++- arch/powerpc/configs/85xx/socrates_defconfig | 385 ++++++++++++++---- arch/powerpc/configs/85xx/stx_gp3_defconfig | 105 +++-- arch/powerpc/configs/85xx/tqm8540_defconfig | 100 +++-- arch/powerpc/configs/85xx/tqm8541_defconfig | 101 +++-- arch/powerpc/configs/85xx/tqm8548_defconfig | 64 ++- arch/powerpc/configs/85xx/tqm8555_defconfig | 101 +++-- arch/powerpc/configs/85xx/tqm8560_defconfig | 101 +++-- 13 files changed, 1118 insertions(+), 351 deletions(-) diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 6479bb9f3f57..09146ddaa3ca 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:03 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:16 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -86,21 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -109,10 +123,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -120,6 +136,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -127,7 +144,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,11 +159,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -163,6 +174,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -444,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -467,9 +481,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -502,6 +520,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -531,6 +550,8 @@ CONFIG_MDIO_BITBANG=y # CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -544,6 +565,7 @@ CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_FCC=y CONFIG_FS_ENET_MDIO_FCC=y CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -552,7 +574,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -624,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -663,6 +685,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set @@ -726,7 +749,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -739,7 +761,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -753,6 +775,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -763,6 +786,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -785,6 +809,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -829,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -838,7 +868,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -866,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -879,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -901,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -931,9 +966,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -941,17 +979,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1045,6 +1086,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index 905e8a3388d6..7b43be7586b6 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:05 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:17 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,16 +126,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -129,7 +146,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -145,11 +161,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -165,6 +176,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -233,9 +245,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,17 +281,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -387,9 +402,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -404,6 +423,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -432,6 +452,8 @@ CONFIG_PHYLIB=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -441,6 +463,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -449,7 +472,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -607,7 +629,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -620,7 +641,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -634,6 +655,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -644,6 +666,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -665,6 +688,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -708,6 +736,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -717,7 +746,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -745,6 +773,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -758,11 +787,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -780,6 +811,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -809,9 +843,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -819,17 +856,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -922,6 +961,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 095e2ded6e8b..62adb71a5d4f 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:09 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:17 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +128,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -125,6 +141,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -132,7 +149,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,11 +164,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -168,6 +179,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -236,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +279,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -277,17 +293,17 @@ CONFIG_PCI_DEBUG=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -343,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -405,12 +421,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -437,6 +457,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -470,6 +491,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -493,6 +516,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -503,10 +527,12 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -516,6 +542,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -525,6 +552,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -532,7 +560,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -608,6 +635,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -651,6 +679,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set @@ -719,7 +748,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -733,7 +761,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -749,6 +777,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -759,6 +788,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -780,6 +810,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -823,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -832,7 +868,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -860,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -873,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -895,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -924,9 +965,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -934,17 +978,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1037,6 +1083,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index f95961c04a20..41209e3a6545 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:13 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:18 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,16 +127,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -234,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,17 +291,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -341,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -353,7 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -402,18 +418,23 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -488,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -521,6 +543,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -540,6 +564,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -550,10 +575,12 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -563,6 +590,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -572,6 +600,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -579,7 +608,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -750,7 +778,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -764,7 +791,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -780,6 +807,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -790,6 +818,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -811,6 +840,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -854,6 +888,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -863,7 +898,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -891,6 +925,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -904,11 +939,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -926,6 +963,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -955,9 +995,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -965,17 +1008,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1068,6 +1113,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index e68e80987aa9..6c36c9c7abfd 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:15 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:19 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -271,17 +287,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -337,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,7 +366,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -396,12 +412,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -428,6 +448,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -461,6 +482,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -480,6 +503,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -490,10 +514,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -503,6 +529,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -512,6 +539,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -519,7 +547,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -692,6 +719,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -716,6 +744,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -759,6 +792,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -768,7 +802,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -784,6 +817,7 @@ CONFIG_SUNRPC=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,11 +831,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -821,13 +857,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -918,6 +965,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index b1c766ef7e2e..4aaf1a6bdc7d 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:17 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:20 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -385,9 +400,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -402,6 +421,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,8 @@ CONFIG_BROADCOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -439,6 +461,7 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_NETDEV_10000=y @@ -447,7 +470,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -603,7 +625,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -616,7 +637,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -665,8 +686,9 @@ CONFIG_RTC_DRV_M48T59=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -691,6 +713,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -734,6 +761,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -743,7 +771,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -771,6 +798,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -784,11 +812,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -806,6 +836,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -834,9 +867,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -844,17 +880,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -958,6 +996,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index 0cc9048290a8..79984589db69 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26.2 -# Sat Oct 18 11:06:13 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:21 2009 # # CONFIG_PPC64 is not set @@ -15,15 +15,19 @@ CONFIG_PPC_85xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_E500=y +# CONFIG_PPC_E500MC is not set CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 -CONFIG_PPC_MERGE=y +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y @@ -33,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -43,7 +48,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -54,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,54 +77,70 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -126,12 +148,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -145,13 +165,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Platform support # -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set @@ -160,12 +178,14 @@ CONFIG_MPC85xx=y # CONFIG_MPC8560_ADS is not set # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set +# CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set CONFIG_SOCRATES=y # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set +# CONFIG_TQM8548 is not set # CONFIG_TQM8555 is not set # CONFIG_TQM8560 is not set # CONFIG_SBC8548 is not set @@ -181,14 +201,16 @@ CONFIG_MPIC=y # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set +# CONFIG_QUICC_ENGINE is not set # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options # # CONFIG_HIGHMEM is not set -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -202,6 +224,8 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set @@ -216,17 +240,24 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -238,6 +269,7 @@ CONFIG_ZONE_DMA=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y @@ -245,6 +277,8 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -256,15 +290,12 @@ CONFIG_PCI_LEGACY=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 - -# -# Networking -# CONFIG_NET=y # @@ -315,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -324,7 +356,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -339,27 +373,17 @@ CONFIG_CAN_BCM=y # CAN Device Drivers # # CONFIG_CAN_VCAN is not set -# CONFIG_CAN_OLD_DRIVERS is not set -# CONFIG_CAN_SLCAN is not set -CONFIG_CAN_SJA1000=y -CONFIG_CAN_SJA1000_MEM_OF=y -# CONFIG_CAN_EMS_PCI is not set -# CONFIG_CAN_IXXAT_PCI is not set -# CONFIG_CAN_PEAK_PCI is not set -# CONFIG_CAN_KVASER_PCI is not set -# CONFIG_CAN_MSCAN is not set # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -378,6 +402,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -458,15 +483,22 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_NAND_FSL_ELBC is not set +# CONFIG_MTD_NAND_FSL_UPM is not set CONFIG_MTD_NAND_SOCRATES=y # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -486,12 +518,24 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -533,6 +577,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -549,7 +595,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -572,6 +618,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -581,22 +630,28 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -607,10 +662,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -619,7 +677,10 @@ CONFIG_GFAR_NAPI=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -668,17 +729,23 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -CONFIG_TOUCHSCREEN_TSC2003=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_INPUT_MISC is not set # @@ -691,6 +758,7 @@ CONFIG_TOUCHSCREEN_TSC2003=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -715,16 +783,20 @@ CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -734,44 +806,62 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -785,33 +875,38 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set -CONFIG_SPI_SOCRATES=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -827,10 +922,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -849,22 +949,31 @@ CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -893,6 +1002,7 @@ CONFIG_DAB=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -914,10 +1024,6 @@ CONFIG_FB_BOTH_ENDIAN=y # # Frame buffer hardware drivers # -CONFIG_FB_MB862XX=y -# CONFIG_FB_MB862XX_PCI_GDC is not set -CONFIG_FB_MB862XX_LIME=y -# CONFIG_FB_PRE_INIT_FB is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -936,6 +1042,7 @@ CONFIG_FB_MB862XX_LIME=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -944,9 +1051,16 @@ CONFIG_FB_MB862XX_LIME=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_FSL_DIU is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +CONFIG_FB_MB862XX=y +# CONFIG_FB_MB862XX_PCI_GDC is not set +CONFIG_FB_MB862XX_LIME=y +# CONFIG_FB_PRE_INIT_FB is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -974,10 +1088,6 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -988,9 +1098,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1008,6 +1145,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1018,6 +1158,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1031,6 +1172,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1038,20 +1181,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1067,7 +1210,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1080,7 +1222,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1088,7 +1230,6 @@ CONFIG_USB_MON=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1098,7 +1239,14 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1135,33 +1283,42 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set -CONFIG_RTC_DRV_RX8025=y +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # -CONFIG_RTC_DRV_PPC=y +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1170,17 +1327,20 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1189,6 +1349,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1208,15 +1373,13 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1236,25 +1399,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1286,25 +1451,28 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1321,7 +1489,32 @@ CONFIG_FRAME_WARN=1024 # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1330,13 +1523,16 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1374,6 +1570,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1403,8 +1603,15 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index eb4ba7a5f41f..bd1bfcddbd0c 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:18 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:22 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +128,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,6 +142,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -137,7 +154,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,11 +169,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -173,6 +184,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set @@ -241,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,17 +298,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +369,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -389,6 +406,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_LOG is not set # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_RAW is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set @@ -406,6 +424,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -418,7 +437,6 @@ CONFIG_NET_PKTGEN=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -476,13 +494,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -591,9 +616,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -617,6 +644,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -633,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -666,6 +695,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -687,6 +718,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -697,10 +729,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -710,6 +744,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -719,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -726,7 +762,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -778,7 +813,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -837,6 +871,7 @@ CONFIG_PRINTER=m # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -903,12 +938,9 @@ CONFIG_I2C_ALGOBIT=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -964,6 +996,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -978,11 +1011,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1075,7 +1112,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1089,7 +1125,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1116,6 +1152,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1137,6 +1174,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1186,6 +1228,7 @@ CONFIG_CRAMFS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1197,7 +1240,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1253,6 +1295,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1266,12 +1309,13 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1289,6 +1333,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1319,9 +1366,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1329,17 +1379,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1433,6 +1485,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index f4379b1cf841..767600145fb2 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:19 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,19 +100,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,16 +125,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -164,6 +175,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y @@ -232,9 +244,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -259,6 +274,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -270,17 +286,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -348,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -448,7 +464,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -477,19 +492,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -564,6 +587,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -597,6 +621,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -634,6 +660,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -644,10 +671,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -657,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -666,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -673,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -754,6 +784,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -816,12 +847,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -853,6 +881,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -867,11 +896,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -955,7 +987,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -969,7 +1000,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -985,6 +1016,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -995,6 +1027,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1016,6 +1049,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1070,6 +1108,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1079,7 +1118,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1107,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1122,11 +1161,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1148,13 +1188,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1245,6 +1296,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index b8669231c1fe..52fafc006dd0 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:20 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 43030fea2eee..8b4faae7a9a1 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Mon Mar 16 09:03:28 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:24 2009 # # CONFIG_PPC64 is not set @@ -59,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -99,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -123,10 +127,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -134,6 +140,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -146,7 +153,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -177,6 +183,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -246,6 +253,8 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -278,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -302,7 +312,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -358,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -370,7 +380,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -514,6 +523,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -548,6 +558,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -581,6 +592,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -600,6 +613,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -610,6 +624,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -624,6 +639,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -633,6 +649,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -640,7 +657,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -785,7 +801,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -817,6 +832,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -831,11 +847,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -919,7 +938,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set @@ -982,8 +1000,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1008,6 +1027,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1062,6 +1086,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1071,7 +1096,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1099,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1114,11 +1139,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1136,6 +1162,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1166,10 +1195,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1177,17 +1208,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1281,6 +1314,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index d5a864d74461..170360934cec 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:21 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:25 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index a25009174f37..f41cc2444d48 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:22 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:26 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -112,10 +126,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -166,6 +177,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set @@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -601,6 +625,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -885,6 +913,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -988,7 +1021,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1049,6 +1083,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1155,11 +1195,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # From 08af66b137d9213dfc051a222144adceb41dee4b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:26:51 -0500 Subject: [PATCH 199/670] powerpc/86xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 92 ++++++-- .../powerpc/configs/86xx/gef_sbc310_defconfig | 92 ++++++-- .../powerpc/configs/86xx/gef_sbc610_defconfig | 122 +++++++--- .../configs/86xx/mpc8610_hpcd_defconfig | 100 ++++++--- .../configs/86xx/mpc8641_hpcn_defconfig | 211 +++++++----------- arch/powerpc/configs/86xx/sbc8641d_defconfig | 114 +++++++--- arch/powerpc/configs/mpc86xx_defconfig | 211 +++++++----------- 7 files changed, 556 insertions(+), 386 deletions(-) diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index df2c16337794..b6a23af57f46 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Fri Mar 13 15:36:11 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:31 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -100,21 +103,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -123,10 +129,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -135,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -148,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -169,8 +177,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -189,6 +195,7 @@ CONFIG_GEF_PPC9A=y # CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -250,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -281,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -303,7 +314,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -383,9 +393,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -398,6 +410,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -456,11 +469,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -495,6 +508,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -545,7 +559,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -686,6 +699,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -751,9 +765,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -776,6 +792,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -852,6 +869,7 @@ CONFIG_SATA_SIL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -885,6 +903,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -904,6 +924,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -914,8 +935,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -929,7 +950,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1056,6 +1076,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1122,7 +1143,6 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1178,6 +1198,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1192,11 +1213,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1315,15 +1340,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1393,11 +1420,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1439,7 +1466,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1456,6 +1482,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1517,8 +1544,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1531,6 +1559,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1552,6 +1581,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1609,6 +1643,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1621,7 +1656,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1682,6 +1716,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1697,11 +1732,12 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1719,6 +1755,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1747,9 +1786,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1758,17 +1800,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1790,6 +1834,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1805,10 +1850,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1878,6 +1925,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index bd236b3d915a..a66910e63345 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Wed Jan 28 23:05:34 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:29 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -96,20 +99,23 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,10 +124,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,6 +138,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -143,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -165,8 +173,6 @@ CONFIG_PPC_MSI_BITMAP=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,9 +187,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set CONFIG_GEF_SBC310=y # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -245,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -275,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,7 +300,6 @@ CONFIG_PCI_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 @@ -298,7 +309,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -382,6 +392,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -394,7 +405,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set @@ -493,7 +503,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -529,6 +538,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -594,9 +604,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -619,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -641,6 +654,7 @@ CONFIG_SATA_SIL24=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -674,6 +688,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -693,6 +709,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -703,11 +720,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -717,7 +735,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -828,6 +845,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -894,7 +912,6 @@ CONFIG_DS1682=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -949,6 +966,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -963,11 +981,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1086,15 +1108,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1164,11 +1188,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1210,7 +1234,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1226,6 +1249,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1287,8 +1311,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1301,6 +1326,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1322,6 +1348,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1382,6 +1413,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1394,7 +1426,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1455,6 +1486,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1470,11 +1502,12 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1494,13 +1527,25 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1530,10 +1575,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1602,6 +1649,7 @@ CONFIG_CRYPTO_DES=y # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 1ab5abae00a2..c6a7fc82b69a 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:26 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:30 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,10 +74,20 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -91,21 +103,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +129,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -139,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,8 +191,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set CONFIG_GEF_SBC610=y CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -244,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -275,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -298,7 +315,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -378,9 +394,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -393,6 +411,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -451,11 +470,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -490,6 +509,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -540,7 +560,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -651,7 +670,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -682,13 +700,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -746,9 +771,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -771,6 +798,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -847,6 +875,7 @@ CONFIG_SATA_SIL=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -880,6 +909,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -899,6 +930,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -909,11 +941,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -923,7 +956,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1050,6 +1082,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1113,12 +1146,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1174,6 +1204,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1188,11 +1219,15 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1311,15 +1346,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1389,11 +1426,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1435,7 +1472,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1452,6 +1488,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1513,8 +1550,9 @@ CONFIG_RTC_DRV_RX8581=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1527,6 +1565,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1548,6 +1587,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1595,6 +1639,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1607,7 +1652,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1668,6 +1712,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1681,13 +1726,14 @@ CONFIG_CRC_CCITT=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1705,6 +1751,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1733,9 +1782,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1744,17 +1796,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1776,6 +1830,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1791,10 +1846,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1864,6 +1921,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index bbdf4bfc4327..cfd2efcc6bce 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:24 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:28 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +74,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -87,21 +98,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -111,10 +125,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -150,18 +166,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -176,9 +185,13 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set # CONFIG_SBC8641D is not set CONFIG_MPC8610_HPCD=y +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8610=y # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -238,9 +251,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -291,7 +308,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -364,6 +380,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -376,7 +393,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -492,7 +508,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -521,13 +536,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -632,9 +654,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -657,6 +681,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -733,6 +758,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -747,6 +773,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set @@ -774,7 +802,6 @@ CONFIG_ULI526X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -929,12 +956,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1049,6 +1073,7 @@ CONFIG_FB_FSL_DIU=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1069,6 +1094,7 @@ CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y +CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y @@ -1116,6 +1142,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1165,7 +1193,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1179,7 +1206,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1247,8 +1274,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1259,6 +1287,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1279,6 +1308,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1323,6 +1357,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1337,7 +1372,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1409,6 +1443,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1422,11 +1457,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1444,6 +1481,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1474,9 +1514,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1484,17 +1527,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1589,6 +1634,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 92acfdf3540a..0bee3e303942 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:25 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:28 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,11 +72,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -90,22 +102,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +129,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -127,6 +143,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -140,7 +157,6 @@ CONFIG_MODVERSIONS=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -182,8 +191,11 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y # CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -245,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +289,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -297,7 +313,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -385,6 +400,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -397,7 +413,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -451,13 +466,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -516,9 +538,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -541,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -617,6 +642,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -650,6 +676,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -669,6 +697,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -679,11 +708,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -693,6 +723,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -702,6 +733,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -709,7 +741,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -875,12 +906,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -933,7 +961,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -942,6 +970,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -981,103 +1010,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1157,6 +1090,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1211,15 +1146,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1292,11 +1229,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1338,7 +1275,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1354,6 +1290,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1415,8 +1352,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1427,6 +1365,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1449,6 +1388,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1504,6 +1448,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1519,7 +1464,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1590,6 +1534,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1604,11 +1549,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1626,6 +1572,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1656,9 +1605,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1666,17 +1618,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1707,10 +1661,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1779,6 +1735,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index 04797e730c5a..c30a0c715873 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:23 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:27 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,10 +73,20 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -90,21 +102,24 @@ CONFIG_RELAY=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,10 +128,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -125,6 +142,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -138,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,18 +171,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -180,8 +190,11 @@ CONFIG_PPC_86xx=y # CONFIG_MPC8641_HPCN is not set CONFIG_SBC8641D=y # CONFIG_MPC8610_HPCD is not set +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set # CONFIG_GEF_SBC610 is not set CONFIG_MPC8641=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -243,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -274,6 +290,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -296,7 +313,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -376,9 +392,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -391,6 +409,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -449,11 +468,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -488,6 +507,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -538,7 +558,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -649,7 +668,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -678,13 +696,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -729,6 +754,7 @@ CONFIG_DM_ZERO=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -762,6 +788,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -781,6 +809,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -791,11 +820,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -805,7 +835,6 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -923,6 +952,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -985,12 +1015,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1022,6 +1049,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1036,11 +1064,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1145,7 +1176,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1159,7 +1189,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -1175,6 +1205,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1187,6 +1218,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1227,6 +1259,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1269,8 +1306,13 @@ CONFIG_MINIX_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1283,7 +1325,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1346,6 +1387,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1359,13 +1401,14 @@ CONFIG_CRC_CCITT=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1383,6 +1426,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1411,9 +1457,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1422,17 +1471,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1454,6 +1506,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1469,10 +1522,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1542,6 +1597,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index adc756e1f252..5bb1b8eb0b49 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:39 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:00 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_PHYS_64BIT is not set CONFIG_ALTIVEC=y @@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,11 +73,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -91,22 +103,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -116,10 +130,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -128,6 +144,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -141,7 +158,6 @@ CONFIG_MODVERSIONS=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,18 +173,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -183,9 +192,12 @@ CONFIG_PPC_86xx=y CONFIG_MPC8641_HPCN=y CONFIG_SBC8641D=y CONFIG_MPC8610_HPCD=y +# CONFIG_GEF_PPC9A is not set +# CONFIG_GEF_SBC310 is not set CONFIG_GEF_SBC610=y CONFIG_MPC8641=y CONFIG_MPC8610=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -247,9 +259,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -299,7 +315,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -387,6 +402,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -399,7 +415,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -454,13 +469,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -519,9 +541,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -544,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -620,6 +645,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -653,6 +679,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -672,6 +700,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -682,11 +711,12 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -696,6 +726,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -705,6 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -712,7 +744,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -879,12 +910,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -963,7 +991,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -972,6 +1000,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -1011,103 +1040,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1187,6 +1120,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1241,15 +1176,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1322,11 +1259,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1368,7 +1305,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1385,6 +1321,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1446,8 +1383,9 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1458,6 +1396,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1480,6 +1419,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1535,6 +1479,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1550,7 +1495,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1621,6 +1565,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1635,11 +1580,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1657,6 +1603,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1687,9 +1636,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1697,17 +1649,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1738,10 +1692,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1810,6 +1766,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # From 25991b90d7087c9ced2a31cacae4cb4655348a41 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:28:42 -0500 Subject: [PATCH 200/670] powerpc/embedded6xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/c2k_defconfig | 128 ++++++++++++++------ arch/powerpc/configs/ep8248e_defconfig | 74 +++++++---- arch/powerpc/configs/linkstation_defconfig | 96 +++++++++++---- arch/powerpc/configs/mgcoge_defconfig | 74 ++++++++--- arch/powerpc/configs/mpc7448_hpc2_defconfig | 91 ++++++++++---- arch/powerpc/configs/mpc8272_ads_defconfig | 77 ++++++++---- arch/powerpc/configs/pq2fads_defconfig | 90 ++++++++++---- arch/powerpc/configs/prpmc2800_defconfig | 120 +++++++++++++----- arch/powerpc/configs/storcenter_defconfig | 71 ++++++++--- 9 files changed, 600 insertions(+), 221 deletions(-) diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 5103319a7f56..9ffa8de92803 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:26 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:51 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,12 +72,22 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -92,23 +104,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,6 +134,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -133,6 +150,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -145,7 +163,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -161,18 +178,11 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -192,6 +202,8 @@ CONFIG_EMBEDDED6xx=y # CONFIG_PPC_PRPMC2800 is not set CONFIG_PPC_C2K=y CONFIG_MV64X60=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -268,9 +280,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -295,6 +310,7 @@ CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set @@ -315,15 +331,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -364,7 +376,7 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_LRO=m +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -403,9 +415,11 @@ CONFIG_BRIDGE_NETFILTER=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set +# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -419,6 +433,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -508,11 +523,11 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_MH is not set CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m # CONFIG_IP6_NF_SECURITY is not set CONFIG_BRIDGE_NF_EBTABLES=m @@ -544,6 +559,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set CONFIG_ATM=m CONFIG_ATM_CLIP=m @@ -566,6 +582,7 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -612,6 +629,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -638,7 +656,6 @@ CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -748,7 +765,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -846,9 +862,11 @@ CONFIG_MEGARAID_MM=m CONFIG_MEGARAID_MAILBOX=m # CONFIG_MEGARAID_LEGACY is not set CONFIG_MEGARAID_SAS=m +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -875,6 +893,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -891,6 +910,7 @@ CONFIG_SCSI_LPFC=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m CONFIG_BONDING=m # CONFIG_MACVLAN is not set @@ -924,6 +944,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -943,6 +965,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -957,6 +980,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -966,7 +990,6 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -1084,6 +1107,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=m CONFIG_GEN_RTC=m # CONFIG_GEN_RTC_X is not set @@ -1150,12 +1174,9 @@ CONFIG_I2C_MV64XXX=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -CONFIG_SENSORS_PCF8591=m # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1187,6 +1208,7 @@ CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set CONFIG_SENSORS_GL518SM=m # CONFIG_SENSORS_GL520SM is not set CONFIG_SENSORS_IT87=m @@ -1201,11 +1223,14 @@ CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set CONFIG_SENSORS_MAX1619=m # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +CONFIG_SENSORS_PCF8591=m # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_SMSC47M1=m @@ -1363,21 +1388,21 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m # CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set @@ -1402,7 +1427,7 @@ CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_CH341 is not set CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m @@ -1438,12 +1463,14 @@ CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m @@ -1466,7 +1493,6 @@ CONFIG_USB_LCD=m CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1487,6 +1513,7 @@ CONFIG_USB_SPEEDTOUCH=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1516,6 +1543,7 @@ CONFIG_DMADEVICES=y # # DMA Devices # +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1524,6 +1552,7 @@ CONFIG_DMADEVICES=y # # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -1553,6 +1582,11 @@ CONFIG_QUOTACTL=y CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1612,6 +1646,7 @@ CONFIG_VXFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1626,7 +1661,6 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_XPRT_RDMA=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1637,6 +1671,7 @@ CONFIG_CIFS=m CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y # CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1704,6 +1739,7 @@ CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1719,12 +1755,15 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1742,6 +1781,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1775,12 +1817,15 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1788,18 +1833,21 @@ CONFIG_TRACING=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1830,6 +1878,7 @@ CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_TOMOYO is not set CONFIG_CRYPTO=y # @@ -1845,10 +1894,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -1918,6 +1969,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index add6419c15d9..04915c3a43f6 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:27 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:52 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -104,10 +114,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -115,6 +127,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -122,7 +135,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -137,18 +149,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -167,6 +172,8 @@ CONFIG_8272=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -222,9 +229,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -250,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,7 +283,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +363,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -364,7 +375,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -468,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -517,6 +526,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -550,6 +560,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -572,6 +584,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -581,8 +594,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -594,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -603,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -610,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -662,6 +676,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -751,8 +766,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -763,6 +780,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -780,6 +798,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -894,6 +916,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -907,11 +930,11 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -927,6 +950,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -955,9 +979,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -965,16 +992,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1005,9 +1034,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1071,6 +1102,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 15900dcf0bfa..a4053ab9e244 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc6 -# Fri Mar 6 00:07:38 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:54 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +70,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -100,21 +103,24 @@ CONFIG_NAMESPACES=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -124,10 +130,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -135,6 +143,7 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -147,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -168,8 +176,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -191,6 +197,8 @@ CONFIG_LINKSTATION=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -250,9 +258,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -277,6 +288,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -299,7 +311,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -371,6 +382,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set @@ -379,6 +391,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_TARGET_TRACE is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set @@ -389,6 +402,7 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set @@ -465,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -477,7 +492,6 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -625,6 +639,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -690,9 +705,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -715,6 +732,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -791,6 +809,7 @@ CONFIG_PATA_SIL680=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -805,6 +824,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=y @@ -833,6 +854,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -843,8 +865,8 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -858,6 +880,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -867,6 +890,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -874,7 +898,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -985,6 +1008,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -1050,7 +1074,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,6 +1105,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1096,11 +1120,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1195,7 +1222,6 @@ CONFIG_HID=m # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1250,11 +1276,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1290,7 +1316,7 @@ CONFIG_USB_SERIAL_CONSOLE=y # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=y @@ -1314,11 +1340,13 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set @@ -1341,7 +1369,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1357,6 +1384,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1418,8 +1446,9 @@ CONFIG_RTC_DRV_RS5C372=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1430,6 +1459,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1455,6 +1485,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1507,6 +1542,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1524,7 +1560,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1584,6 +1619,7 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1597,15 +1633,18 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1623,6 +1662,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1652,9 +1694,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1662,17 +1707,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1703,10 +1750,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1776,6 +1825,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index c58c38d5b7a6..31e1df665157 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:30 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:55 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -57,6 +58,7 @@ CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -83,23 +94,25 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,10 +121,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -119,6 +134,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -126,7 +142,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -141,18 +156,11 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y CONFIG_PPC_CHRP=y # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -171,7 +179,9 @@ CONFIG_8272=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set CONFIG_MPIC=y @@ -231,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,7 +296,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +357,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +369,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -464,7 +477,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -517,6 +529,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -551,6 +564,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -576,7 +591,6 @@ CONFIG_FS_ENET_HAS_SCC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -631,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_RTAS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -720,8 +735,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -732,6 +749,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -750,6 +768,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -872,6 +894,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -887,11 +910,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -907,6 +931,7 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -935,9 +960,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -945,16 +973,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -986,9 +1017,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 38712e861c46..642ab67c8431 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:33 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:56 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -85,20 +96,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -108,16 +122,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -125,7 +142,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -141,18 +157,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -172,6 +181,8 @@ CONFIG_MPC7448HPC2=y # CONFIG_PPC_PRPMC2800 is not set # CONFIG_PPC_C2K is not set CONFIG_TSI108_BRIDGE=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y CONFIG_MPIC_WEIRD=y @@ -230,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +269,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -277,7 +292,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -333,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -345,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -392,12 +406,16 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -454,9 +472,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -479,6 +499,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -554,6 +575,7 @@ CONFIG_SATA_MV=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -587,6 +609,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -628,6 +652,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -639,10 +664,10 @@ CONFIG_NETDEV_1000=y # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set CONFIG_TSI108_ETH=y -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -652,6 +677,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -661,6 +687,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -668,7 +695,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -839,7 +865,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -853,7 +878,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -869,6 +894,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -879,6 +905,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -901,6 +928,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -944,6 +976,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -953,7 +986,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -985,6 +1017,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -998,11 +1031,13 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1024,13 +1059,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1122,6 +1168,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index d85a43cb821f..cb966ca2ce89 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:35 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:57 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,6 +128,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -123,7 +136,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -138,18 +150,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -169,6 +174,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -225,9 +232,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -253,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,7 +286,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -356,6 +366,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -367,7 +378,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -472,7 +482,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -521,6 +530,7 @@ CONFIG_HAVE_IDE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -554,6 +564,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -576,6 +588,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -585,8 +598,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -598,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -607,6 +621,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -614,7 +629,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -668,7 +682,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -719,6 +732,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -809,8 +823,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -821,6 +837,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -841,6 +858,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -956,6 +977,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -971,11 +993,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -993,6 +1015,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1022,9 +1047,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1032,16 +1060,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1072,9 +1102,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1138,6 +1170,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index fdded96633a1..129d80860f2a 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:42 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:02 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -81,22 +92,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -106,10 +119,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -117,6 +132,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -124,7 +140,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -139,18 +154,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -169,6 +177,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -225,9 +235,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -254,6 +267,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -276,7 +290,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -357,6 +370,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -368,7 +382,6 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -473,7 +486,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -498,10 +510,14 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -573,6 +589,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -606,6 +623,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -628,6 +647,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_R8169 is not set @@ -637,8 +657,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_JME is not set @@ -650,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -659,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -666,7 +688,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -720,7 +741,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -773,6 +793,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -868,7 +889,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set @@ -907,13 +928,16 @@ CONFIG_USB_ETH_RNDIS=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -924,6 +948,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -944,6 +969,10 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -1059,6 +1088,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1074,11 +1104,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1096,6 +1127,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1125,9 +1159,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1135,16 +1172,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1175,9 +1214,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1241,6 +1282,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index e971db171138..e9f287f313fa 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:44 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:03 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,9 +72,19 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -89,22 +101,26 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,16 +130,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -131,7 +150,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,18 +165,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -178,6 +189,8 @@ CONFIG_EMBEDDED6xx=y CONFIG_PPC_PRPMC2800=y # CONFIG_PPC_C2K is not set CONFIG_MV64X60=y +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -237,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -262,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -279,15 +296,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -318,7 +331,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -355,7 +369,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -459,7 +472,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -489,19 +501,27 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -605,9 +625,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -630,6 +652,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -707,6 +730,7 @@ CONFIG_MACINTOSH_DRIVERS=y # CONFIG_MAC_EMUMOUSEBTN is not set # CONFIG_WINDFARM is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -740,6 +764,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -781,6 +807,7 @@ CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -795,6 +822,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -804,6 +832,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -813,6 +842,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -820,7 +850,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -975,12 +1004,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1012,6 +1038,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1026,11 +1053,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1127,15 +1157,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1202,11 +1234,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1236,7 +1268,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1252,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1313,8 +1345,9 @@ CONFIG_RTC_DRV_MAX6900=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1325,6 +1358,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1347,6 +1381,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1391,6 +1430,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1400,7 +1440,6 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1432,6 +1471,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1445,11 +1485,15 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1471,13 +1515,24 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1569,6 +1624,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 94903465ea12..bd4a8d435c50 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc6 -# Fri Mar 6 00:09:08 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:04 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -95,17 +97,17 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,16 +117,19 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -137,7 +142,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,8 +162,6 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -181,6 +183,8 @@ CONFIG_STORCENTER=y CONFIG_MPC10X_BRIDGE=y CONFIG_MPC10X_OPENPIC=y # CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -239,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -266,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,7 +296,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -351,7 +359,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -486,6 +493,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -500,6 +508,7 @@ CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -604,9 +613,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -628,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -637,7 +649,7 @@ CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=y # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -655,6 +667,7 @@ CONFIG_MD_RAID5_RESHAPE=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -671,6 +684,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -681,8 +695,8 @@ CONFIG_R8169=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -696,7 +710,6 @@ CONFIG_R8169=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -766,6 +779,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -831,7 +845,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -952,11 +965,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -997,7 +1010,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1013,6 +1025,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1074,8 +1087,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1086,6 +1100,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1112,6 +1127,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1166,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_EXPORTFS=m @@ -1231,6 +1252,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1246,11 +1268,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1272,13 +1294,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 From 2e15eedffaae555085071c68cb94b9eeed2245be Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 17:29:08 -0500 Subject: [PATCH 201/670] powerpc/8xx: Update defconfigs Signed-off-by: Kumar Gala --- arch/powerpc/configs/adder875_defconfig | 65 +++++++++++++------ arch/powerpc/configs/ep88xc_defconfig | 63 +++++++++++++------ arch/powerpc/configs/mgsuvd_defconfig | 72 +++++++++++++++------ arch/powerpc/configs/mpc866_ads_defconfig | 77 ++++++++++++++++------- arch/powerpc/configs/mpc885_ads_defconfig | 63 +++++++++++++------ 5 files changed, 241 insertions(+), 99 deletions(-) diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index aaab5cc3751c..74f7f7c6fdc4 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:24 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:50 2009 # # CONFIG_PPC64 is not set @@ -53,6 +53,7 @@ CONFIG_GENERIC_BUG=y CONFIG_REDBOOT=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -85,19 +95,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -106,10 +116,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -117,13 +129,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -139,11 +151,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,6 +498,8 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -558,7 +566,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -606,6 +613,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -675,6 +683,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -698,6 +707,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -742,6 +756,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -753,7 +768,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -785,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -802,6 +817,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -819,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -845,9 +864,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -855,17 +877,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index b2fdfd9e183c..c2a439595f4d 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:28 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:53 2009 # # CONFIG_PPC64 is not set @@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -491,6 +498,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -562,6 +570,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -631,6 +640,7 @@ CONFIG_DAB=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -654,6 +664,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -698,6 +713,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -709,7 +725,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -741,6 +756,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -758,6 +774,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -775,6 +792,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -801,9 +821,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -811,17 +834,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 297b5d5042be..24fa90792c54 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:32 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:21:55 2009 # # CONFIG_PPC64 is not set @@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -82,20 +92,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -103,10 +116,12 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -114,6 +129,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -121,7 +137,6 @@ CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -137,11 +152,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -232,9 +242,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -268,14 +281,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -483,6 +492,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -511,6 +521,8 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -531,7 +543,6 @@ CONFIG_FS_ENET_HAS_SCC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -582,6 +593,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -651,6 +663,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -663,6 +676,7 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -685,6 +699,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -739,6 +758,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -750,7 +770,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -782,6 +801,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,11 +817,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -819,13 +840,25 @@ CONFIG_DEBUG_FS=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -917,6 +950,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 1793d08e9c01..3add6f62b21e 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:38 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:00 2009 # # CONFIG_PPC64 is not set @@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -83,18 +93,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -103,10 +113,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -114,6 +126,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -121,7 +134,6 @@ CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -137,11 +149,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -232,9 +239,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -268,14 +278,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -379,9 +386,13 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -396,6 +407,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -424,6 +436,8 @@ CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -437,6 +451,7 @@ CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y CONFIG_NETDEV_1000=y +# CONFIG_FSL_PQ_MDIO is not set # CONFIG_GIANFAR is not set CONFIG_NETDEV_10000=y @@ -445,7 +460,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -492,7 +506,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -540,6 +553,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -622,7 +636,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -635,7 +648,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -649,6 +662,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -661,6 +675,7 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -682,6 +697,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -725,6 +745,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -736,7 +757,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -768,6 +788,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -782,11 +803,11 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -806,13 +827,24 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 @@ -903,6 +935,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 4b76321c0ec4..42e64ebc279d 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:41 2009 +# Linux kernel version: 2.6.30-rc3 +# Wed May 13 17:22:01 2009 # # CONFIG_PPC64 is not set @@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -105,10 +115,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -240,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -277,14 +287,11 @@ CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xfd000000 -CONFIG_CONSISTENT_SIZE=0x00200000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -335,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -347,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -450,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -474,6 +480,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -502,6 +509,8 @@ CONFIG_DAVICOM_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -522,7 +531,6 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -573,6 +581,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -642,6 +651,7 @@ CONFIG_DAB=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -665,6 +675,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -709,6 +724,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -720,7 +736,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -752,6 +767,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -769,6 +785,7 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -786,6 +803,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -812,9 +832,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -822,17 +845,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set From 5df6d737dd4b0fe9eccf943abb3677cfea05a6c4 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 17 Apr 2009 18:33:26 -0700 Subject: [PATCH 202/670] [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA fnic is a driver for the Cisco PCI-Express FCoE HBA Signed-off-by: Abhijeet Joglekar Signed-off-by: Joe Eykholt Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- MAINTAINERS | 8 + drivers/scsi/Kconfig | 11 + drivers/scsi/Makefile | 1 + drivers/scsi/fnic/Makefile | 15 + drivers/scsi/fnic/cq_desc.h | 78 ++ drivers/scsi/fnic/cq_enet_desc.h | 167 +++ drivers/scsi/fnic/cq_exch_desc.h | 182 +++ drivers/scsi/fnic/fcpio.h | 780 ++++++++++++ drivers/scsi/fnic/fnic.h | 265 +++++ drivers/scsi/fnic/fnic_attrs.c | 56 + drivers/scsi/fnic/fnic_fcs.c | 742 ++++++++++++ drivers/scsi/fnic/fnic_io.h | 67 ++ drivers/scsi/fnic/fnic_isr.c | 332 ++++++ drivers/scsi/fnic/fnic_main.c | 942 +++++++++++++++ drivers/scsi/fnic/fnic_res.c | 444 +++++++ drivers/scsi/fnic/fnic_res.h | 197 +++ drivers/scsi/fnic/fnic_scsi.c | 1850 +++++++++++++++++++++++++++++ drivers/scsi/fnic/rq_enet_desc.h | 58 + drivers/scsi/fnic/vnic_cq.c | 85 ++ drivers/scsi/fnic/vnic_cq.h | 121 ++ drivers/scsi/fnic/vnic_cq_copy.h | 62 + drivers/scsi/fnic/vnic_dev.c | 690 +++++++++++ drivers/scsi/fnic/vnic_dev.h | 161 +++ drivers/scsi/fnic/vnic_devcmd.h | 281 +++++ drivers/scsi/fnic/vnic_intr.c | 60 + drivers/scsi/fnic/vnic_intr.h | 118 ++ drivers/scsi/fnic/vnic_nic.h | 69 ++ drivers/scsi/fnic/vnic_resource.h | 61 + drivers/scsi/fnic/vnic_rq.c | 196 +++ drivers/scsi/fnic/vnic_rq.h | 235 ++++ drivers/scsi/fnic/vnic_scsi.h | 99 ++ drivers/scsi/fnic/vnic_stats.h | 68 ++ drivers/scsi/fnic/vnic_wq.c | 182 +++ drivers/scsi/fnic/vnic_wq.h | 175 +++ drivers/scsi/fnic/vnic_wq_copy.c | 117 ++ drivers/scsi/fnic/vnic_wq_copy.h | 128 ++ drivers/scsi/fnic/wq_enet_desc.h | 96 ++ 37 files changed, 9199 insertions(+) create mode 100644 drivers/scsi/fnic/Makefile create mode 100644 drivers/scsi/fnic/cq_desc.h create mode 100644 drivers/scsi/fnic/cq_enet_desc.h create mode 100644 drivers/scsi/fnic/cq_exch_desc.h create mode 100644 drivers/scsi/fnic/fcpio.h create mode 100644 drivers/scsi/fnic/fnic.h create mode 100644 drivers/scsi/fnic/fnic_attrs.c create mode 100644 drivers/scsi/fnic/fnic_fcs.c create mode 100644 drivers/scsi/fnic/fnic_io.h create mode 100644 drivers/scsi/fnic/fnic_isr.c create mode 100644 drivers/scsi/fnic/fnic_main.c create mode 100644 drivers/scsi/fnic/fnic_res.c create mode 100644 drivers/scsi/fnic/fnic_res.h create mode 100644 drivers/scsi/fnic/fnic_scsi.c create mode 100644 drivers/scsi/fnic/rq_enet_desc.h create mode 100644 drivers/scsi/fnic/vnic_cq.c create mode 100644 drivers/scsi/fnic/vnic_cq.h create mode 100644 drivers/scsi/fnic/vnic_cq_copy.h create mode 100644 drivers/scsi/fnic/vnic_dev.c create mode 100644 drivers/scsi/fnic/vnic_dev.h create mode 100644 drivers/scsi/fnic/vnic_devcmd.h create mode 100644 drivers/scsi/fnic/vnic_intr.c create mode 100644 drivers/scsi/fnic/vnic_intr.h create mode 100644 drivers/scsi/fnic/vnic_nic.h create mode 100644 drivers/scsi/fnic/vnic_resource.h create mode 100644 drivers/scsi/fnic/vnic_rq.c create mode 100644 drivers/scsi/fnic/vnic_rq.h create mode 100644 drivers/scsi/fnic/vnic_scsi.h create mode 100644 drivers/scsi/fnic/vnic_stats.h create mode 100644 drivers/scsi/fnic/vnic_wq.c create mode 100644 drivers/scsi/fnic/vnic_wq.h create mode 100644 drivers/scsi/fnic/vnic_wq_copy.c create mode 100644 drivers/scsi/fnic/vnic_wq_copy.h create mode 100644 drivers/scsi/fnic/wq_enet_desc.h diff --git a/MAINTAINERS b/MAINTAINERS index 2b349ba4add4..c7bed166ad6f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1431,6 +1431,14 @@ P: Russell King M: linux@arm.linux.org.uk F: include/linux/clk.h +CISCO FCOE HBA DRIVER +P: Abhijeet Joglekar +M: abjoglek@cisco.com +P: Joe Eykholt +M: jeykholt@cisco.com +L: linux-scsi@vger.kernel.org +S: Supported + CODA FILE SYSTEM P: Jan Harkes M: jaharkes@cs.cmu.edu diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8ed2990c826e..fb2740789b68 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -628,6 +628,17 @@ config FCOE ---help--- Fibre Channel over Ethernet module +config FCOE_FNIC + tristate "Cisco FNIC Driver" + depends on PCI && X86 + select LIBFC + help + This is support for the Cisco PCI-Express FCoE HBA. + + To compile this driver as a module, choose M here and read + . + The module will be called fnic. + config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e7c861ac417d..a5049cfb40ed 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_SCSI_DH) += device_handler/ obj-$(CONFIG_LIBFC) += libfc/ obj-$(CONFIG_LIBFCOE) += fcoe/ obj-$(CONFIG_FCOE) += fcoe/ +obj-$(CONFIG_FCOE_FNIC) += fnic/ obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o diff --git a/drivers/scsi/fnic/Makefile b/drivers/scsi/fnic/Makefile new file mode 100644 index 000000000000..37c3440bc17c --- /dev/null +++ b/drivers/scsi/fnic/Makefile @@ -0,0 +1,15 @@ +obj-$(CONFIG_FCOE_FNIC) += fnic.o + +fnic-y := \ + fnic_attrs.o \ + fnic_isr.o \ + fnic_main.o \ + fnic_res.o \ + fnic_fcs.o \ + fnic_scsi.o \ + vnic_cq.o \ + vnic_dev.o \ + vnic_intr.o \ + vnic_rq.o \ + vnic_wq_copy.o \ + vnic_wq.o diff --git a/drivers/scsi/fnic/cq_desc.h b/drivers/scsi/fnic/cq_desc.h new file mode 100644 index 000000000000..d1225cf6320e --- /dev/null +++ b/drivers/scsi/fnic/cq_desc.h @@ -0,0 +1,78 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_DESC_H_ +#define _CQ_DESC_H_ + +/* + * Completion queue descriptor types + */ +enum cq_desc_types { + CQ_DESC_TYPE_WQ_ENET = 0, + CQ_DESC_TYPE_DESC_COPY = 1, + CQ_DESC_TYPE_WQ_EXCH = 2, + CQ_DESC_TYPE_RQ_ENET = 3, + CQ_DESC_TYPE_RQ_FCP = 4, +}; + +/* Completion queue descriptor: 16B + * + * All completion queues have this basic layout. The + * type_specfic area is unique for each completion + * queue type. + */ +struct cq_desc { + __le16 completed_index; + __le16 q_number; + u8 type_specfic[11]; + u8 type_color; +}; + +#define CQ_DESC_TYPE_BITS 4 +#define CQ_DESC_TYPE_MASK ((1 << CQ_DESC_TYPE_BITS) - 1) +#define CQ_DESC_COLOR_MASK 1 +#define CQ_DESC_COLOR_SHIFT 7 +#define CQ_DESC_Q_NUM_BITS 10 +#define CQ_DESC_Q_NUM_MASK ((1 << CQ_DESC_Q_NUM_BITS) - 1) +#define CQ_DESC_COMP_NDX_BITS 12 +#define CQ_DESC_COMP_NDX_MASK ((1 << CQ_DESC_COMP_NDX_BITS) - 1) + +static inline void cq_desc_dec(const struct cq_desc *desc_arg, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index) +{ + const struct cq_desc *desc = desc_arg; + const u8 type_color = desc->type_color; + + *color = (type_color >> CQ_DESC_COLOR_SHIFT) & CQ_DESC_COLOR_MASK; + + /* + * Make sure color bit is read from desc *before* other fields + * are read from desc. Hardware guarantees color bit is last + * bit (byte) written. Adding the rmb() prevents the compiler + * and/or CPU from reordering the reads which would potentially + * result in reading stale values. + */ + + rmb(); + + *type = type_color & CQ_DESC_TYPE_MASK; + *q_number = le16_to_cpu(desc->q_number) & CQ_DESC_Q_NUM_MASK; + *completed_index = le16_to_cpu(desc->completed_index) & + CQ_DESC_COMP_NDX_MASK; +} + +#endif /* _CQ_DESC_H_ */ diff --git a/drivers/scsi/fnic/cq_enet_desc.h b/drivers/scsi/fnic/cq_enet_desc.h new file mode 100644 index 000000000000..a9fa26f82ddd --- /dev/null +++ b/drivers/scsi/fnic/cq_enet_desc.h @@ -0,0 +1,167 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_ENET_DESC_H_ +#define _CQ_ENET_DESC_H_ + +#include "cq_desc.h" + +/* Ethernet completion queue descriptor: 16B */ +struct cq_enet_wq_desc { + __le16 completed_index; + __le16 q_number; + u8 reserved[11]; + u8 type_color; +}; + +static inline void cq_enet_wq_desc_dec(struct cq_enet_wq_desc *desc, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index) +{ + cq_desc_dec((struct cq_desc *)desc, type, + color, q_number, completed_index); +} + +/* Completion queue descriptor: Ethernet receive queue, 16B */ +struct cq_enet_rq_desc { + __le16 completed_index_flags; + __le16 q_number_rss_type_flags; + __le32 rss_hash; + __le16 bytes_written_flags; + __le16 vlan; + __le16 checksum_fcoe; + u8 flags; + u8 type_color; +}; + +#define CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT (0x1 << 12) +#define CQ_ENET_RQ_DESC_FLAGS_FCOE (0x1 << 13) +#define CQ_ENET_RQ_DESC_FLAGS_EOP (0x1 << 14) +#define CQ_ENET_RQ_DESC_FLAGS_SOP (0x1 << 15) + +#define CQ_ENET_RQ_DESC_RSS_TYPE_BITS 4 +#define CQ_ENET_RQ_DESC_RSS_TYPE_MASK \ + ((1 << CQ_ENET_RQ_DESC_RSS_TYPE_BITS) - 1) +#define CQ_ENET_RQ_DESC_RSS_TYPE_NONE 0 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv4 1 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv4 2 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6 3 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6 4 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6_EX 5 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6_EX 6 + +#define CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC (0x1 << 14) + +#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS 14 +#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK \ + ((1 << CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS) - 1) +#define CQ_ENET_RQ_DESC_FLAGS_TRUNCATED (0x1 << 14) +#define CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED (0x1 << 15) + +#define CQ_ENET_RQ_DESC_FCOE_SOF_BITS 4 +#define CQ_ENET_RQ_DESC_FCOE_SOF_MASK \ + ((1 << CQ_ENET_RQ_DESC_FCOE_SOF_BITS) - 1) +#define CQ_ENET_RQ_DESC_FCOE_EOF_BITS 8 +#define CQ_ENET_RQ_DESC_FCOE_EOF_MASK \ + ((1 << CQ_ENET_RQ_DESC_FCOE_EOF_BITS) - 1) +#define CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT 8 + +#define CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK (0x1 << 0) +#define CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK (0x1 << 0) +#define CQ_ENET_RQ_DESC_FLAGS_UDP (0x1 << 1) +#define CQ_ENET_RQ_DESC_FCOE_ENC_ERROR (0x1 << 1) +#define CQ_ENET_RQ_DESC_FLAGS_TCP (0x1 << 2) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK (0x1 << 3) +#define CQ_ENET_RQ_DESC_FLAGS_IPV6 (0x1 << 4) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4 (0x1 << 5) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT (0x1 << 6) +#define CQ_ENET_RQ_DESC_FLAGS_FCS_OK (0x1 << 7) + +static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index, + u8 *ingress_port, u8 *fcoe, u8 *eop, u8 *sop, u8 *rss_type, + u8 *csum_not_calc, u32 *rss_hash, u16 *bytes_written, u8 *packet_error, + u8 *vlan_stripped, u16 *vlan, u16 *checksum, u8 *fcoe_sof, + u8 *fcoe_fc_crc_ok, u8 *fcoe_enc_error, u8 *fcoe_eof, + u8 *tcp_udp_csum_ok, u8 *udp, u8 *tcp, u8 *ipv4_csum_ok, + u8 *ipv6, u8 *ipv4, u8 *ipv4_fragment, u8 *fcs_ok) +{ + u16 completed_index_flags = le16_to_cpu(desc->completed_index_flags); + u16 q_number_rss_type_flags = + le16_to_cpu(desc->q_number_rss_type_flags); + u16 bytes_written_flags = le16_to_cpu(desc->bytes_written_flags); + + cq_desc_dec((struct cq_desc *)desc, type, + color, q_number, completed_index); + + *ingress_port = (completed_index_flags & + CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT) ? 1 : 0; + *fcoe = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_FCOE) ? + 1 : 0; + *eop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_EOP) ? + 1 : 0; + *sop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_SOP) ? + 1 : 0; + + *rss_type = (u8)((q_number_rss_type_flags >> CQ_DESC_Q_NUM_BITS) & + CQ_ENET_RQ_DESC_RSS_TYPE_MASK); + *csum_not_calc = (q_number_rss_type_flags & + CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC) ? 1 : 0; + + *rss_hash = le32_to_cpu(desc->rss_hash); + + *bytes_written = bytes_written_flags & + CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK; + *packet_error = (bytes_written_flags & + CQ_ENET_RQ_DESC_FLAGS_TRUNCATED) ? 1 : 0; + *vlan_stripped = (bytes_written_flags & + CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED) ? 1 : 0; + + *vlan = le16_to_cpu(desc->vlan); + + if (*fcoe) { + *fcoe_sof = (u8)(le16_to_cpu(desc->checksum_fcoe) & + CQ_ENET_RQ_DESC_FCOE_SOF_MASK); + *fcoe_fc_crc_ok = (desc->flags & + CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0; + *fcoe_enc_error = (desc->flags & + CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0; + *fcoe_eof = (u8)((desc->checksum_fcoe >> + CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) & + CQ_ENET_RQ_DESC_FCOE_EOF_MASK); + *checksum = 0; + } else { + *fcoe_sof = 0; + *fcoe_fc_crc_ok = 0; + *fcoe_enc_error = 0; + *fcoe_eof = 0; + *checksum = le16_to_cpu(desc->checksum_fcoe); + } + + *tcp_udp_csum_ok = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK) ? 1 : 0; + *udp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_UDP) ? 1 : 0; + *tcp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP) ? 1 : 0; + *ipv4_csum_ok = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK) ? 1 : 0; + *ipv6 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV6) ? 1 : 0; + *ipv4 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4) ? 1 : 0; + *ipv4_fragment = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT) ? 1 : 0; + *fcs_ok = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_FCS_OK) ? 1 : 0; +} + +#endif /* _CQ_ENET_DESC_H_ */ diff --git a/drivers/scsi/fnic/cq_exch_desc.h b/drivers/scsi/fnic/cq_exch_desc.h new file mode 100644 index 000000000000..501660cfe228 --- /dev/null +++ b/drivers/scsi/fnic/cq_exch_desc.h @@ -0,0 +1,182 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_EXCH_DESC_H_ +#define _CQ_EXCH_DESC_H_ + +#include "cq_desc.h" + +/* Exchange completion queue descriptor: 16B */ +struct cq_exch_wq_desc { + u16 completed_index; + u16 q_number; + u16 exchange_id; + u8 tmpl; + u8 reserved0; + u32 reserved1; + u8 exch_status; + u8 reserved2[2]; + u8 type_color; +}; + +#define CQ_EXCH_WQ_STATUS_BITS 2 +#define CQ_EXCH_WQ_STATUS_MASK ((1 << CQ_EXCH_WQ_STATUS_BITS) - 1) + +enum cq_exch_status_types { + CQ_EXCH_WQ_STATUS_TYPE_COMPLETE = 0, + CQ_EXCH_WQ_STATUS_TYPE_ABORT = 1, + CQ_EXCH_WQ_STATUS_TYPE_SGL_EOF = 2, + CQ_EXCH_WQ_STATUS_TYPE_TMPL_ERR = 3, +}; + +static inline void cq_exch_wq_desc_dec(struct cq_exch_wq_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *completed_index, + u8 *exch_status) +{ + cq_desc_dec((struct cq_desc *)desc_ptr, type, + color, q_number, completed_index); + *exch_status = desc_ptr->exch_status & CQ_EXCH_WQ_STATUS_MASK; +} + +struct cq_fcp_rq_desc { + u16 completed_index_eop_sop_prt; + u16 q_number; + u16 exchange_id; + u16 tmpl; + u16 bytes_written; + u16 vlan; + u8 sof; + u8 eof; + u8 fcs_fer_fck; + u8 type_color; +}; + +#define CQ_FCP_RQ_DESC_FLAGS_SOP (1 << 15) +#define CQ_FCP_RQ_DESC_FLAGS_EOP (1 << 14) +#define CQ_FCP_RQ_DESC_FLAGS_PRT (1 << 12) +#define CQ_FCP_RQ_DESC_TMPL_MASK 0x1f +#define CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK 0x3fff +#define CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT 14 +#define CQ_FCP_RQ_DESC_PACKET_ERR_MASK (1 << CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT) +#define CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT 15 +#define CQ_FCP_RQ_DESC_VS_STRIPPED_MASK (1 << CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT) +#define CQ_FCP_RQ_DESC_FC_CRC_OK_MASK 0x1 +#define CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT 1 +#define CQ_FCP_RQ_DESC_FCOE_ERR_MASK (1 << CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT) +#define CQ_FCP_RQ_DESC_FCS_OK_SHIFT 7 +#define CQ_FCP_RQ_DESC_FCS_OK_MASK (1 << CQ_FCP_RQ_DESC_FCS_OK_SHIFT) + +static inline void cq_fcp_rq_desc_dec(struct cq_fcp_rq_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *completed_index, + u8 *eop, + u8 *sop, + u8 *fck, + u16 *exchange_id, + u16 *tmpl, + u32 *bytes_written, + u8 *sof, + u8 *eof, + u8 *ingress_port, + u8 *packet_err, + u8 *fcoe_err, + u8 *fcs_ok, + u8 *vlan_stripped, + u16 *vlan) +{ + cq_desc_dec((struct cq_desc *)desc_ptr, type, + color, q_number, completed_index); + *eop = (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_EOP) ? 1 : 0; + *sop = (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_SOP) ? 1 : 0; + *ingress_port = + (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_PRT) ? 1 : 0; + *exchange_id = desc_ptr->exchange_id; + *tmpl = desc_ptr->tmpl & CQ_FCP_RQ_DESC_TMPL_MASK; + *bytes_written = + desc_ptr->bytes_written & CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK; + *packet_err = + (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_PACKET_ERR_MASK) >> + CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT; + *vlan_stripped = + (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_VS_STRIPPED_MASK) >> + CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT; + *vlan = desc_ptr->vlan; + *sof = desc_ptr->sof; + *fck = desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FC_CRC_OK_MASK; + *fcoe_err = (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCOE_ERR_MASK) >> + CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT; + *eof = desc_ptr->eof; + *fcs_ok = + (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCS_OK_MASK) >> + CQ_FCP_RQ_DESC_FCS_OK_SHIFT; +} + +struct cq_sgl_desc { + u16 exchange_id; + u16 q_number; + u32 active_burst_offset; + u32 tot_data_bytes; + u16 tmpl; + u8 sgl_err; + u8 type_color; +}; + +enum cq_sgl_err_types { + CQ_SGL_ERR_NO_ERROR = 0, + CQ_SGL_ERR_OVERFLOW, /* data ran beyond end of SGL */ + CQ_SGL_ERR_SGL_LCL_ADDR_ERR, /* sgl access to local vnic addr illegal*/ + CQ_SGL_ERR_ADDR_RSP_ERR, /* sgl address error */ + CQ_SGL_ERR_DATA_RSP_ERR, /* sgl data rsp error */ + CQ_SGL_ERR_CNT_ZERO_ERR, /* SGL count is 0 */ + CQ_SGL_ERR_CNT_MAX_ERR, /* SGL count is larger than supported */ + CQ_SGL_ERR_ORDER_ERR, /* frames recv on both ports, order err */ + CQ_SGL_ERR_DATA_LCL_ADDR_ERR,/* sgl data buf to local vnic addr ill */ + CQ_SGL_ERR_HOST_CQ_ERR, /* host cq entry to local vnic addr ill */ +}; + +#define CQ_SGL_SGL_ERR_MASK 0x1f +#define CQ_SGL_TMPL_MASK 0x1f + +static inline void cq_sgl_desc_dec(struct cq_sgl_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *exchange_id, + u32 *active_burst_offset, + u32 *tot_data_bytes, + u16 *tmpl, + u8 *sgl_err) +{ + /* Cheat a little by assuming exchange_id is the same as completed + index */ + cq_desc_dec((struct cq_desc *)desc_ptr, type, color, q_number, + exchange_id); + *active_burst_offset = desc_ptr->active_burst_offset; + *tot_data_bytes = desc_ptr->tot_data_bytes; + *tmpl = desc_ptr->tmpl & CQ_SGL_TMPL_MASK; + *sgl_err = desc_ptr->sgl_err & CQ_SGL_SGL_ERR_MASK; +} + +#endif /* _CQ_EXCH_DESC_H_ */ diff --git a/drivers/scsi/fnic/fcpio.h b/drivers/scsi/fnic/fcpio.h new file mode 100644 index 000000000000..12d770d885c5 --- /dev/null +++ b/drivers/scsi/fnic/fcpio.h @@ -0,0 +1,780 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FCPIO_H_ +#define _FCPIO_H_ + +#include + +/* + * This header file includes all of the data structures used for + * communication by the host driver to the fcp firmware. + */ + +/* + * Exchange and sequence id space allocated to the host driver + */ +#define FCPIO_HOST_EXCH_RANGE_START 0x1000 +#define FCPIO_HOST_EXCH_RANGE_END 0x1fff +#define FCPIO_HOST_SEQ_ID_RANGE_START 0x80 +#define FCPIO_HOST_SEQ_ID_RANGE_END 0xff + +/* + * Command entry type + */ +enum fcpio_type { + /* + * Initiator request types + */ + FCPIO_ICMND_16 = 0x1, + FCPIO_ICMND_32, + FCPIO_ICMND_CMPL, + FCPIO_ITMF, + FCPIO_ITMF_CMPL, + + /* + * Target request types + */ + FCPIO_TCMND_16 = 0x11, + FCPIO_TCMND_32, + FCPIO_TDATA, + FCPIO_TXRDY, + FCPIO_TRSP, + FCPIO_TDRSP_CMPL, + FCPIO_TTMF, + FCPIO_TTMF_ACK, + FCPIO_TABORT, + FCPIO_TABORT_CMPL, + + /* + * Misc request types + */ + FCPIO_ACK = 0x20, + FCPIO_RESET, + FCPIO_RESET_CMPL, + FCPIO_FLOGI_REG, + FCPIO_FLOGI_REG_CMPL, + FCPIO_ECHO, + FCPIO_ECHO_CMPL, + FCPIO_LUNMAP_CHNG, + FCPIO_LUNMAP_REQ, + FCPIO_LUNMAP_REQ_CMPL, + FCPIO_FLOGI_FIP_REG, + FCPIO_FLOGI_FIP_REG_CMPL, +}; + +/* + * Header status codes from the firmware + */ +enum fcpio_status { + FCPIO_SUCCESS = 0, /* request was successful */ + + /* + * If a request to the firmware is rejected, the original request + * header will be returned with the status set to one of the following: + */ + FCPIO_INVALID_HEADER, /* header contains invalid data */ + FCPIO_OUT_OF_RESOURCE, /* out of resources to complete request */ + FCPIO_INVALID_PARAM, /* some parameter in request is invalid */ + FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */ + FCPIO_IO_NOT_FOUND, /* requested I/O was not found */ + + /* + * Once a request is processed, the firmware will usually return + * a cmpl message type. In cases where errors occurred, + * the header status field would be filled in with one of the following: + */ + FCPIO_ABORTED = 0x41, /* request was aborted */ + FCPIO_TIMEOUT, /* request was timed out */ + FCPIO_SGL_INVALID, /* request was aborted due to sgl error */ + FCPIO_MSS_INVALID, /* request was aborted due to mss error */ + FCPIO_DATA_CNT_MISMATCH, /* recv/sent more/less data than exp. */ + FCPIO_FW_ERR, /* request was terminated due to fw error */ + FCPIO_ITMF_REJECTED, /* itmf req was rejected by remote node */ + FCPIO_ITMF_FAILED, /* itmf req was failed by remote node */ + FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */ + FCPIO_CMND_REJECTED, /* request was invalid and rejected */ + FCPIO_NO_PATH_AVAIL, /* no paths to the lun was available */ + FCPIO_PATH_FAILED, /* i/o sent to current path failed */ + FCPIO_LUNMAP_CHNG_PEND, /* i/o rejected due to lunmap change */ +}; + +/* + * The header command tag. All host requests will use the "tag" field + * to mark commands with a unique tag. When the firmware responds to + * a host request, it will copy the tag field into the response. + * + * The only firmware requests that will use the rx_id/ox_id fields instead + * of the tag field will be the target command and target task management + * requests. These two requests do not have corresponding host requests + * since they come directly from the FC initiator on the network. + */ +struct fcpio_tag { + union { + u32 req_id; + struct { + u16 rx_id; + u16 ox_id; + } ex_id; + } u; +}; + +static inline void +fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id) +{ + tag->u.req_id = id; +} + +static inline void +fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id) +{ + *id = tag->u.req_id; +} + +static inline void +fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id) +{ + tag->u.ex_id.rx_id = rx_id; + tag->u.ex_id.ox_id = ox_id; +} + +static inline void +fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id) +{ + *rx_id = tag->u.ex_id.rx_id; + *ox_id = tag->u.ex_id.ox_id; +} + +/* + * The header for an fcpio request, whether from the firmware or from the + * host driver + */ +struct fcpio_header { + u8 type; /* enum fcpio_type */ + u8 status; /* header status entry */ + u16 _resvd; /* reserved */ + struct fcpio_tag tag; /* header tag */ +}; + +static inline void +fcpio_header_enc(struct fcpio_header *hdr, + u8 type, u8 status, + struct fcpio_tag tag) +{ + hdr->type = type; + hdr->status = status; + hdr->_resvd = 0; + hdr->tag = tag; +} + +static inline void +fcpio_header_dec(struct fcpio_header *hdr, + u8 *type, u8 *status, + struct fcpio_tag *tag) +{ + *type = hdr->type; + *status = hdr->status; + *tag = hdr->tag; +} + +#define CDB_16 16 +#define CDB_32 32 +#define LUN_ADDRESS 8 + +/* + * fcpio_icmnd_16: host -> firmware request + * + * used for sending out an initiator SCSI 16-byte command + */ +struct fcpio_icmnd_16 { + u32 lunmap_id; /* index into lunmap table */ + u8 special_req_flags; /* special exchange request flags */ + u8 _resvd0[3]; /* reserved */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 sense_len; /* sense buffer length */ + u64 sgl_addr; /* scatter-gather list addr */ + u64 sense_addr; /* sense buffer address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd1; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd2; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u16 mss; /* FC vNIC only: max burst */ + u16 _resvd3; /* reserved */ + u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */ + u32 e_d_tov; /* FC vNIC only: Err Detect Timeout */ +}; + +/* + * Special request flags + */ +#define FCPIO_ICMND_SRFLAG_RETRY 0x01 /* Enable Retry handling on exchange */ + +/* + * Priority/Task Attribute settings + */ +#define FCPIO_ICMND_PTA_SIMPLE 0 /* simple task attribute */ +#define FCPIO_ICMND_PTA_HEADQ 1 /* head of queue task attribute */ +#define FCPIO_ICMND_PTA_ORDERED 2 /* ordered task attribute */ +#define FCPIO_ICMND_PTA_ACA 4 /* auto contingent allegiance */ +#define FCPIO_ICMND_PRI_SHIFT 3 /* priority field starts in bit 3 */ + +/* + * Command flags + */ +#define FCPIO_ICMND_RDDATA 0x02 /* read data */ +#define FCPIO_ICMND_WRDATA 0x01 /* write data */ + +/* + * fcpio_icmnd_32: host -> firmware request + * + * used for sending out an initiator SCSI 32-byte command + */ +struct fcpio_icmnd_32 { + u32 lunmap_id; /* index into lunmap table */ + u8 special_req_flags; /* special exchange request flags */ + u8 _resvd0[3]; /* reserved */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 sense_len; /* sense buffer length */ + u64 sgl_addr; /* scatter-gather list addr */ + u64 sense_addr; /* sense buffer address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd1; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd2; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u16 mss; /* FC vNIC only: max burst */ + u16 _resvd3; /* reserved */ + u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */ + u32 e_d_tov; /* FC vNIC only: Error Detect Timeout */ +}; + +/* + * fcpio_itmf: host -> firmware request + * + * used for requesting the firmware to abort a request and/or send out + * a task management function + * + * The t_tag field is only needed when the request type is ABT_TASK. + */ +struct fcpio_itmf { + u32 lunmap_id; /* index into lunmap table */ + u32 tm_req; /* SCSI Task Management request */ + u32 t_tag; /* header tag of fcpio to be aborted */ + u32 _resvd; /* _reserved */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd1; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u32 r_a_tov; /* FC vNIC only: R_A_TOV in msec */ + u32 e_d_tov; /* FC vNIC only: E_D_TOV in msec */ +}; + +/* + * Task Management request + */ +enum fcpio_itmf_tm_req_type { + FCPIO_ITMF_ABT_TASK_TERM = 0x01, /* abort task and terminate */ + FCPIO_ITMF_ABT_TASK, /* abort task and issue abts */ + FCPIO_ITMF_ABT_TASK_SET, /* abort task set */ + FCPIO_ITMF_CLR_TASK_SET, /* clear task set */ + FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */ + FCPIO_ITMF_CLR_ACA, /* Clear ACA condition */ +}; + +/* + * fcpio_tdata: host -> firmware request + * + * used for requesting the firmware to send out a read data transfer for a + * target command + */ +struct fcpio_tdata { + u16 rx_id; /* FC rx_id of target command */ + u16 flags; /* command flags */ + u32 rel_offset; /* data sequence relative offset */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 data_len; /* length of data expected to send */ + u64 sgl_addr; /* scatter-gather list address */ +}; + +/* + * Command flags + */ +#define FCPIO_TDATA_SCSI_RSP 0x01 /* send a scsi resp. after last frame */ + +/* + * fcpio_txrdy: host -> firmware request + * + * used for requesting the firmware to send out a write data transfer for a + * target command + */ +struct fcpio_txrdy { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 rel_offset; /* data sequence relative offset */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 data_len; /* length of data expected to send */ + u64 sgl_addr; /* scatter-gather list address */ +}; + +/* + * fcpio_trsp: host -> firmware request + * + * used for requesting the firmware to send out a response for a target + * command + */ +struct fcpio_trsp { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 sense_len; /* sense data buffer length */ + u64 sense_addr; /* sense data buffer address */ + u16 _resvd1; /* reserved */ + u8 flags; /* response request flags */ + u8 scsi_status; /* SCSI status */ + u32 residual; /* SCSI data residual value of I/O */ +}; + +/* + * resposnse request flags + */ +#define FCPIO_TRSP_RESID_UNDER 0x08 /* residual is valid and is underflow */ +#define FCPIO_TRSP_RESID_OVER 0x04 /* residual is valid and is overflow */ + +/* + * fcpio_ttmf_ack: host -> firmware response + * + * used by the host to indicate to the firmware it has received and processed + * the target tmf request + */ +struct fcpio_ttmf_ack { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 tmf_status; /* SCSI task management status */ +}; + +/* + * fcpio_tabort: host -> firmware request + * + * used by the host to request the firmware to abort a target request that was + * received by the firmware + */ +struct fcpio_tabort { + u16 rx_id; /* rx_id of the target request */ +}; + +/* + * fcpio_reset: host -> firmware request + * + * used by the host to signal a reset of the driver to the firmware + * and to request firmware to clean up all outstanding I/O + */ +struct fcpio_reset { + u32 _resvd; +}; + +enum fcpio_flogi_reg_format_type { + FCPIO_FLOGI_REG_DEF_DEST = 0, /* Use the oui | s_id mac format */ + FCPIO_FLOGI_REG_GW_DEST, /* Use the fixed gateway mac */ +}; + +/* + * fcpio_flogi_reg: host -> firmware request + * + * fc vnic only + * used by the host to notify the firmware of the lif's s_id + * and destination mac address format + */ +struct fcpio_flogi_reg { + u8 format; + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 gateway_mac[ETH_ALEN]; /* Destination gateway mac */ + u16 _resvd; + u32 r_a_tov; /* R_A_TOV in msec */ + u32 e_d_tov; /* E_D_TOV in msec */ +}; + +/* + * fcpio_echo: host -> firmware request + * + * sends a heartbeat echo request to the firmware + */ +struct fcpio_echo { + u32 _resvd; +}; + +/* + * fcpio_lunmap_req: host -> firmware request + * + * scsi vnic only + * sends a request to retrieve the lunmap table for scsi vnics + */ +struct fcpio_lunmap_req { + u64 addr; /* address of the buffer */ + u32 len; /* len of the buffer */ +}; + +/* + * fcpio_flogi_fip_reg: host -> firmware request + * + * fc vnic only + * used by the host to notify the firmware of the lif's s_id + * and destination mac address format + */ +struct fcpio_flogi_fip_reg { + u8 _resvd0; + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 fcf_mac[ETH_ALEN]; /* FCF Target destination mac */ + u16 _resvd1; + u32 r_a_tov; /* R_A_TOV in msec */ + u32 e_d_tov; /* E_D_TOV in msec */ + u8 ha_mac[ETH_ALEN]; /* Host adapter source mac */ + u16 _resvd2; +}; + +/* + * Basic structure for all fcpio structures that are sent from the host to the + * firmware. They are 128 bytes per structure. + */ +#define FCPIO_HOST_REQ_LEN 128 /* expected length of host requests */ + +struct fcpio_host_req { + struct fcpio_header hdr; + + union { + /* + * Defines space needed for request + */ + u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)]; + + /* + * Initiator host requests + */ + struct fcpio_icmnd_16 icmnd_16; + struct fcpio_icmnd_32 icmnd_32; + struct fcpio_itmf itmf; + + /* + * Target host requests + */ + struct fcpio_tdata tdata; + struct fcpio_txrdy txrdy; + struct fcpio_trsp trsp; + struct fcpio_ttmf_ack ttmf_ack; + struct fcpio_tabort tabort; + + /* + * Misc requests + */ + struct fcpio_reset reset; + struct fcpio_flogi_reg flogi_reg; + struct fcpio_echo echo; + struct fcpio_lunmap_req lunmap_req; + struct fcpio_flogi_fip_reg flogi_fip_reg; + } u; +}; + +/* + * fcpio_icmnd_cmpl: firmware -> host response + * + * used for sending the host a response to an initiator command + */ +struct fcpio_icmnd_cmpl { + u8 _resvd0[6]; /* reserved */ + u8 flags; /* response flags */ + u8 scsi_status; /* SCSI status */ + u32 residual; /* SCSI data residual length */ + u32 sense_len; /* SCSI sense length */ +}; + +/* + * response flags + */ +#define FCPIO_ICMND_CMPL_RESID_UNDER 0x08 /* resid under and valid */ +#define FCPIO_ICMND_CMPL_RESID_OVER 0x04 /* resid over and valid */ + +/* + * fcpio_itmf_cmpl: firmware -> host response + * + * used for sending the host a response for a itmf request + */ +struct fcpio_itmf_cmpl { + u32 _resvd; /* reserved */ +}; + +/* + * fcpio_tcmnd_16: firmware -> host request + * + * used by the firmware to notify the host of an incoming target SCSI 16-Byte + * request + */ +struct fcpio_tcmnd_16 { + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd2; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 _resvd1; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ +}; + +/* + * Priority/Task Attribute settings + */ +#define FCPIO_TCMND_PTA_SIMPLE 0 /* simple task attribute */ +#define FCPIO_TCMND_PTA_HEADQ 1 /* head of queue task attribute */ +#define FCPIO_TCMND_PTA_ORDERED 2 /* ordered task attribute */ +#define FCPIO_TCMND_PTA_ACA 4 /* auto contingent allegiance */ +#define FCPIO_TCMND_PRI_SHIFT 3 /* priority field starts in bit 3 */ + +/* + * Command flags + */ +#define FCPIO_TCMND_RDDATA 0x02 /* read data */ +#define FCPIO_TCMND_WRDATA 0x01 /* write data */ + +/* + * fcpio_tcmnd_32: firmware -> host request + * + * used by the firmware to notify the host of an incoming target SCSI 32-Byte + * request + */ +struct fcpio_tcmnd_32 { + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd2; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 _resvd0; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ +}; + +/* + * fcpio_tdrsp_cmpl: firmware -> host response + * + * used by the firmware to notify the host of a response to a host target + * command + */ +struct fcpio_tdrsp_cmpl { + u16 rx_id; /* rx_id of the target request */ + u16 _resvd0; /* reserved */ +}; + +/* + * fcpio_ttmf: firmware -> host request + * + * used by the firmware to notify the host of an incoming task management + * function request + */ +struct fcpio_ttmf { + u8 _resvd0; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 _resvd2[3]; /* reserved */ + u32 tmf_type; /* task management request type */ +}; + +/* + * Task Management request + */ +#define FCPIO_TTMF_CLR_ACA 0x40 /* Clear ACA condition */ +#define FCPIO_TTMF_LUN_RESET 0x10 /* logical unit reset task mgmt */ +#define FCPIO_TTMF_CLR_TASK_SET 0x04 /* clear task set */ +#define FCPIO_TTMF_ABT_TASK_SET 0x02 /* abort task set */ +#define FCPIO_TTMF_ABT_TASK 0x01 /* abort task */ + +/* + * fcpio_tabort_cmpl: firmware -> host response + * + * used by the firmware to respond to a host's tabort request + */ +struct fcpio_tabort_cmpl { + u16 rx_id; /* rx_id of the target request */ + u16 _resvd0; /* reserved */ +}; + +/* + * fcpio_ack: firmware -> host response + * + * used by firmware to notify the host of the last work request received + */ +struct fcpio_ack { + u16 request_out; /* last host entry received */ + u16 _resvd; +}; + +/* + * fcpio_reset_cmpl: firmware -> host response + * + * use by firmware to respond to the host's reset request + */ +struct fcpio_reset_cmpl { + u16 vnic_id; +}; + +/* + * fcpio_flogi_reg_cmpl: firmware -> host response + * + * fc vnic only + * response to the fcpio_flogi_reg request + */ +struct fcpio_flogi_reg_cmpl { + u32 _resvd; +}; + +/* + * fcpio_echo_cmpl: firmware -> host response + * + * response to the fcpio_echo request + */ +struct fcpio_echo_cmpl { + u32 _resvd; +}; + +/* + * fcpio_lunmap_chng: firmware -> host notification + * + * scsi vnic only + * notifies the host that the lunmap tables have changed + */ +struct fcpio_lunmap_chng { + u32 _resvd; +}; + +/* + * fcpio_lunmap_req_cmpl: firmware -> host response + * + * scsi vnic only + * response for lunmap table request from the host + */ +struct fcpio_lunmap_req_cmpl { + u32 _resvd; +}; + +/* + * Basic structure for all fcpio structures that are sent from the firmware to + * the host. They are 64 bytes per structure. + */ +#define FCPIO_FW_REQ_LEN 64 /* expected length of fw requests */ +struct fcpio_fw_req { + struct fcpio_header hdr; + + union { + /* + * Defines space needed for request + */ + u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)]; + + /* + * Initiator firmware responses + */ + struct fcpio_icmnd_cmpl icmnd_cmpl; + struct fcpio_itmf_cmpl itmf_cmpl; + + /* + * Target firmware new requests + */ + struct fcpio_tcmnd_16 tcmnd_16; + struct fcpio_tcmnd_32 tcmnd_32; + + /* + * Target firmware responses + */ + struct fcpio_tdrsp_cmpl tdrsp_cmpl; + struct fcpio_ttmf ttmf; + struct fcpio_tabort_cmpl tabort_cmpl; + + /* + * Firmware response to work received + */ + struct fcpio_ack ack; + + /* + * Misc requests + */ + struct fcpio_reset_cmpl reset_cmpl; + struct fcpio_flogi_reg_cmpl flogi_reg_cmpl; + struct fcpio_echo_cmpl echo_cmpl; + struct fcpio_lunmap_chng lunmap_chng; + struct fcpio_lunmap_req_cmpl lunmap_req_cmpl; + } u; +}; + +/* + * Access routines to encode and decode the color bit, which is the most + * significant bit of the MSB of the structure + */ +static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color) +{ + u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1; + + if (color) + *c |= 0x80; + else + *c &= ~0x80; +} + +static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color) +{ + u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1; + + *color = *c >> 7; + + /* + * Make sure color bit is read from desc *before* other fields + * are read from desc. Hardware guarantees color bit is last + * bit (byte) written. Adding the rmb() prevents the compiler + * and/or CPU from reordering the reads which would potentially + * result in reading stale values. + */ + + rmb(); + +} + +/* + * Lunmap table entry for scsi vnics + */ +#define FCPIO_LUNMAP_TABLE_SIZE 256 +#define FCPIO_FLAGS_LUNMAP_VALID 0x80 +#define FCPIO_FLAGS_BOOT 0x01 +struct fcpio_lunmap_entry { + u8 bus; + u8 target; + u8 lun; + u8 path_cnt; + u16 flags; + u16 update_cnt; +}; + +struct fcpio_lunmap_tbl { + u32 update_cnt; + struct fcpio_lunmap_entry lunmaps[FCPIO_LUNMAP_TABLE_SIZE]; +}; + +#endif /* _FCPIO_H_ */ diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h new file mode 100644 index 000000000000..e4c0a3d7d87b --- /dev/null +++ b/drivers/scsi/fnic/fnic.h @@ -0,0 +1,265 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_H_ +#define _FNIC_H_ + +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic_res.h" +#include "vnic_dev.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "vnic_cq.h" +#include "vnic_wq_copy.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "vnic_scsi.h" + +#define DRV_NAME "fnic" +#define DRV_DESCRIPTION "Cisco FCoE HBA Driver" +#define DRV_VERSION "1.0.0.1121" +#define PFX DRV_NAME ": " +#define DFX DRV_NAME "%d: " + +#define DESC_CLEAN_LOW_WATERMARK 8 +#define FNIC_MAX_IO_REQ 2048 /* scsi_cmnd tag map entries */ +#define FNIC_IO_LOCKS 64 /* IO locks: power of 2 */ +#define FNIC_DFLT_QUEUE_DEPTH 32 +#define FNIC_STATS_RATE_LIMIT 4 /* limit rate at which stats are pulled up */ + +/* + * Tag bits used for special requests. + */ +#define BIT(nr) (1UL << (nr)) +#define FNIC_TAG_ABORT BIT(30) /* tag bit indicating abort */ +#define FNIC_TAG_DEV_RST BIT(29) /* indicates device reset */ +#define FNIC_TAG_MASK (BIT(24) - 1) /* mask for lookup */ +#define FNIC_NO_TAG -1 + +/* + * Usage of the scsi_cmnd scratchpad. + * These fields are locked by the hashed io_req_lock. + */ +#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr) +#define CMD_STATE(Cmnd) ((Cmnd)->SCp.phase) +#define CMD_ABTS_STATUS(Cmnd) ((Cmnd)->SCp.Message) +#define CMD_LR_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) +#define CMD_TAG(Cmnd) ((Cmnd)->SCp.sent_command) + +#define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */ + +#define FNIC_LUN_RESET_TIMEOUT 10000 /* mSec */ +#define FNIC_HOST_RESET_TIMEOUT 10000 /* mSec */ +#define FNIC_RMDEVICE_TIMEOUT 1000 /* mSec */ +#define FNIC_HOST_RESET_SETTLE_TIME 30 /* Sec */ + +#define FNIC_MAX_FCP_TARGET 256 + +extern unsigned int fnic_log_level; + +#define FNIC_MAIN_LOGGING 0x01 +#define FNIC_FCS_LOGGING 0x02 +#define FNIC_SCSI_LOGGING 0x04 +#define FNIC_ISR_LOGGING 0x08 + +#define FNIC_CHECK_LOGGING(LEVEL, CMD) \ +do { \ + if (unlikely(fnic_log_level & LEVEL)) \ + do { \ + CMD; \ + } while (0); \ +} while (0) + +#define FNIC_MAIN_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_MAIN_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_FCS_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_FCS_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_SCSI_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_SCSI_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_ISR_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_ISR_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +extern const char *fnic_state_str[]; + +enum fnic_intx_intr_index { + FNIC_INTX_WQ_RQ_COPYWQ, + FNIC_INTX_ERR, + FNIC_INTX_NOTIFY, + FNIC_INTX_INTR_MAX, +}; + +enum fnic_msix_intr_index { + FNIC_MSIX_RQ, + FNIC_MSIX_WQ, + FNIC_MSIX_WQ_COPY, + FNIC_MSIX_ERR_NOTIFY, + FNIC_MSIX_INTR_MAX, +}; + +struct fnic_msix_entry { + int requested; + char devname[IFNAMSIZ]; + irqreturn_t (*isr)(int, void *); + void *devid; +}; + +enum fnic_state { + FNIC_IN_FC_MODE = 0, + FNIC_IN_FC_TRANS_ETH_MODE, + FNIC_IN_ETH_MODE, + FNIC_IN_ETH_TRANS_FC_MODE, +}; + +#define FNIC_WQ_COPY_MAX 1 +#define FNIC_WQ_MAX 1 +#define FNIC_RQ_MAX 1 +#define FNIC_CQ_MAX (FNIC_WQ_COPY_MAX + FNIC_WQ_MAX + FNIC_RQ_MAX) + +struct mempool; + +/* Per-instance private data structure */ +struct fnic { + struct fc_lport *lport; + struct vnic_dev_bar bar0; + + struct msix_entry msix_entry[FNIC_MSIX_INTR_MAX]; + struct fnic_msix_entry msix[FNIC_MSIX_INTR_MAX]; + + struct vnic_stats *stats; + unsigned long stats_time; /* time of stats update */ + struct vnic_nic_cfg *nic_cfg; + char name[IFNAMSIZ]; + struct timer_list notify_timer; /* used for MSI interrupts */ + + unsigned int err_intr_offset; + unsigned int link_intr_offset; + + unsigned int wq_count; + unsigned int cq_count; + + u32 fcoui_mode:1; /* use fcoui address*/ + u32 vlan_hw_insert:1; /* let hw insert the tag */ + u32 in_remove:1; /* fnic device in removal */ + u32 stop_rx_link_events:1; /* stop proc. rx frames, link events */ + + struct completion *remove_wait; /* device remove thread blocks */ + + struct fc_frame *flogi; + struct fc_frame *flogi_resp; + u16 flogi_oxid; + unsigned long s_id; + enum fnic_state state; + spinlock_t fnic_lock; + + u16 vlan_id; /* VLAN tag including priority */ + u8 mac_addr[ETH_ALEN]; + u8 dest_addr[ETH_ALEN]; + u8 data_src_addr[ETH_ALEN]; + u64 fcp_input_bytes; /* internal statistic */ + u64 fcp_output_bytes; /* internal statistic */ + u32 link_down_cnt; + int link_status; + + struct list_head list; + struct pci_dev *pdev; + struct vnic_fc_config config; + struct vnic_dev *vdev; + unsigned int raw_wq_count; + unsigned int wq_copy_count; + unsigned int rq_count; + int fw_ack_index[FNIC_WQ_COPY_MAX]; + unsigned short fw_ack_recd[FNIC_WQ_COPY_MAX]; + unsigned short wq_copy_desc_low[FNIC_WQ_COPY_MAX]; + unsigned int intr_count; + u32 __iomem *legacy_pba; + struct fnic_host_tag *tags; + mempool_t *io_req_pool; + mempool_t *io_sgl_pool[FNIC_SGL_NUM_CACHES]; + spinlock_t io_req_lock[FNIC_IO_LOCKS]; /* locks for scsi cmnds */ + + struct work_struct link_work; + struct work_struct frame_work; + struct sk_buff_head frame_queue; + + /* copy work queue cache line section */ + ____cacheline_aligned struct vnic_wq_copy wq_copy[FNIC_WQ_COPY_MAX]; + /* completion queue cache line section */ + ____cacheline_aligned struct vnic_cq cq[FNIC_CQ_MAX]; + + spinlock_t wq_copy_lock[FNIC_WQ_COPY_MAX]; + + /* work queue cache line section */ + ____cacheline_aligned struct vnic_wq wq[FNIC_WQ_MAX]; + spinlock_t wq_lock[FNIC_WQ_MAX]; + + /* receive queue cache line section */ + ____cacheline_aligned struct vnic_rq rq[FNIC_RQ_MAX]; + + /* interrupt resource cache line section */ + ____cacheline_aligned struct vnic_intr intr[FNIC_MSIX_INTR_MAX]; +}; + +extern struct workqueue_struct *fnic_event_queue; +extern struct device_attribute *fnic_attrs[]; + +void fnic_clear_intr_mode(struct fnic *fnic); +int fnic_set_intr_mode(struct fnic *fnic); +void fnic_free_intr(struct fnic *fnic); +int fnic_request_intr(struct fnic *fnic); + +int fnic_send(struct fc_lport *, struct fc_frame *); +void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf); +void fnic_handle_frame(struct work_struct *work); +void fnic_handle_link(struct work_struct *work); +int fnic_rq_cmpl_handler(struct fnic *fnic, int); +int fnic_alloc_rq_frame(struct vnic_rq *rq); +void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf); +int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp); + +int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *)); +int fnic_abort_cmd(struct scsi_cmnd *); +int fnic_device_reset(struct scsi_cmnd *); +int fnic_host_reset(struct scsi_cmnd *); +int fnic_reset(struct Scsi_Host *); +void fnic_scsi_cleanup(struct fc_lport *); +void fnic_scsi_abort_io(struct fc_lport *); +void fnic_empty_scsi_cleanup(struct fc_lport *); +void fnic_exch_mgr_reset(struct fc_lport *, u32, u32); +int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int); +int fnic_wq_cmpl_handler(struct fnic *fnic, int); +int fnic_flogi_reg_handler(struct fnic *fnic); +void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, + struct fcpio_host_req *desc); +int fnic_fw_reset_handler(struct fnic *fnic); +void fnic_terminate_rport_io(struct fc_rport *); +const char *fnic_state_to_str(unsigned int state); + +void fnic_log_q_error(struct fnic *fnic); +void fnic_handle_link_event(struct fnic *fnic); + +#endif /* _FNIC_H_ */ diff --git a/drivers/scsi/fnic/fnic_attrs.c b/drivers/scsi/fnic/fnic_attrs.c new file mode 100644 index 000000000000..aea0c3becfd4 --- /dev/null +++ b/drivers/scsi/fnic/fnic_attrs.c @@ -0,0 +1,56 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "fnic.h" + +static ssize_t fnic_show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fc_lport *lp = shost_priv(class_to_shost(dev)); + struct fnic *fnic = lport_priv(lp); + + return snprintf(buf, PAGE_SIZE, "%s\n", fnic_state_str[fnic->state]); +} + +static ssize_t fnic_show_drv_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", DRV_VERSION); +} + +static ssize_t fnic_show_link_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fc_lport *lp = shost_priv(class_to_shost(dev)); + + return snprintf(buf, PAGE_SIZE, "%s\n", (lp->link_up) + ? "Link Up" : "Link Down"); +} + +static DEVICE_ATTR(fnic_state, S_IRUGO, fnic_show_state, NULL); +static DEVICE_ATTR(drv_version, S_IRUGO, fnic_show_drv_version, NULL); +static DEVICE_ATTR(link_state, S_IRUGO, fnic_show_link_state, NULL); + +struct device_attribute *fnic_attrs[] = { + &dev_attr_fnic_state, + &dev_attr_drv_version, + &dev_attr_link_state, + NULL, +}; diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c new file mode 100644 index 000000000000..07e6eedb83ce --- /dev/null +++ b/drivers/scsi/fnic/fnic_fcs.c @@ -0,0 +1,742 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic.h" +#include "cq_enet_desc.h" +#include "cq_exch_desc.h" + +struct workqueue_struct *fnic_event_queue; + +void fnic_handle_link(struct work_struct *work) +{ + struct fnic *fnic = container_of(work, struct fnic, link_work); + unsigned long flags; + int old_link_status; + u32 old_link_down_cnt; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + + old_link_down_cnt = fnic->link_down_cnt; + old_link_status = fnic->link_status; + fnic->link_status = vnic_dev_link_status(fnic->vdev); + fnic->link_down_cnt = vnic_dev_link_down_cnt(fnic->vdev); + + if (old_link_status == fnic->link_status) { + if (!fnic->link_status) + /* DOWN -> DOWN */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + else { + if (old_link_down_cnt != fnic->link_down_cnt) { + /* UP -> DOWN -> UP */ + fnic->lport->host_stats.link_failure_count++; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "link down\n"); + fc_linkdown(fnic->lport); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "link up\n"); + fc_linkup(fnic->lport); + } else + /* UP -> UP */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + } + } else if (fnic->link_status) { + /* DOWN -> UP */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link up\n"); + fc_linkup(fnic->lport); + } else { + /* UP -> DOWN */ + fnic->lport->host_stats.link_failure_count++; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link down\n"); + fc_linkdown(fnic->lport); + } + +} + +/* + * This function passes incoming fabric frames to libFC + */ +void fnic_handle_frame(struct work_struct *work) +{ + struct fnic *fnic = container_of(work, struct fnic, frame_work); + struct fc_lport *lp = fnic->lport; + unsigned long flags; + struct sk_buff *skb; + struct fc_frame *fp; + + while ((skb = skb_dequeue(&fnic->frame_queue))) { + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb(skb); + return; + } + fp = (struct fc_frame *)skb; + /* if Flogi resp frame, register the address */ + if (fr_flags(fp)) { + vnic_dev_add_addr(fnic->vdev, + fnic->data_src_addr); + fr_flags(fp) = 0; + } + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + fc_exch_recv(lp, lp->emp, fp); + } + +} + +static inline void fnic_import_rq_fc_frame(struct sk_buff *skb, + u32 len, u8 sof, u8 eof) +{ + struct fc_frame *fp = (struct fc_frame *)skb; + + skb_trim(skb, len); + fr_eof(fp) = eof; + fr_sof(fp) = sof; +} + + +static inline int fnic_import_rq_eth_pkt(struct sk_buff *skb, u32 len) +{ + struct fc_frame *fp; + struct ethhdr *eh; + struct vlan_ethhdr *vh; + struct fcoe_hdr *fcoe_hdr; + struct fcoe_crc_eof *ft; + u32 transport_len = 0; + + eh = (struct ethhdr *)skb->data; + vh = (struct vlan_ethhdr *)skb->data; + if (vh->h_vlan_proto == htons(ETH_P_8021Q) && + vh->h_vlan_encapsulated_proto == htons(ETH_P_FCOE)) { + skb_pull(skb, sizeof(struct vlan_ethhdr)); + transport_len += sizeof(struct vlan_ethhdr); + } else if (eh->h_proto == htons(ETH_P_FCOE)) { + transport_len += sizeof(struct ethhdr); + skb_pull(skb, sizeof(struct ethhdr)); + } else + return -1; + + fcoe_hdr = (struct fcoe_hdr *)skb->data; + if (FC_FCOE_DECAPS_VER(fcoe_hdr) != FC_FCOE_VER) + return -1; + + fp = (struct fc_frame *)skb; + fc_frame_init(fp); + fr_sof(fp) = fcoe_hdr->fcoe_sof; + skb_pull(skb, sizeof(struct fcoe_hdr)); + transport_len += sizeof(struct fcoe_hdr); + + ft = (struct fcoe_crc_eof *)(skb->data + len - + transport_len - sizeof(*ft)); + fr_eof(fp) = ft->fcoe_eof; + skb_trim(skb, len - transport_len - sizeof(*ft)); + return 0; +} + +static inline int fnic_handle_flogi_resp(struct fnic *fnic, + struct fc_frame *fp) +{ + u8 mac[ETH_ALEN] = FC_FCOE_FLOGI_MAC; + struct ethhdr *eth_hdr; + struct fc_frame_header *fh; + int ret = 0; + unsigned long flags; + struct fc_frame *old_flogi_resp = NULL; + + fh = (struct fc_frame_header *)fr_hdr(fp); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + if (fnic->state == FNIC_IN_ETH_MODE) { + + /* + * Check if oxid matches on taking the lock. A new Flogi + * issued by libFC might have changed the fnic cached oxid + */ + if (fnic->flogi_oxid != ntohs(fh->fh_ox_id)) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Flogi response oxid not" + " matching cached oxid, dropping frame" + "\n"); + ret = -1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb_irq(fp_skb(fp)); + goto handle_flogi_resp_end; + } + + /* Drop older cached flogi response frame, cache this frame */ + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = fp; + fnic->flogi_oxid = FC_XID_UNKNOWN; + + /* + * this frame is part of flogi get the src mac addr from this + * frame if the src mac is fcoui based then we mark the + * address mode flag to use fcoui base for dst mac addr + * otherwise we have to store the fcoe gateway addr + */ + eth_hdr = (struct ethhdr *)skb_mac_header(fp_skb(fp)); + memcpy(mac, eth_hdr->h_source, ETH_ALEN); + + if (ntoh24(mac) == FC_FCOE_OUI) + fnic->fcoui_mode = 1; + else { + fnic->fcoui_mode = 0; + memcpy(fnic->dest_addr, mac, ETH_ALEN); + } + + /* + * Except for Flogi frame, all outbound frames from us have the + * Eth Src address as FC_FCOE_OUI"our_sid". Flogi frame uses + * the vnic MAC address as the Eth Src address + */ + fc_fcoe_set_mac(fnic->data_src_addr, fh->fh_d_id); + + /* We get our s_id from the d_id of the flogi resp frame */ + fnic->s_id = ntoh24(fh->fh_d_id); + + /* Change state to reflect transition from Eth to FC mode */ + fnic->state = FNIC_IN_ETH_TRANS_FC_MODE; + + } else { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Unexpected fnic state %s while" + " processing flogi resp\n", + fnic_state_to_str(fnic->state)); + ret = -1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb_irq(fp_skb(fp)); + goto handle_flogi_resp_end; + } + + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + /* Drop older cached frame */ + if (old_flogi_resp) + dev_kfree_skb_irq(fp_skb(old_flogi_resp)); + + /* + * send flogi reg request to firmware, this will put the fnic in + * in FC mode + */ + ret = fnic_flogi_reg_handler(fnic); + + if (ret < 0) { + int free_fp = 1; + spin_lock_irqsave(&fnic->fnic_lock, flags); + /* + * free the frame is some other thread is not + * pointing to it + */ + if (fnic->flogi_resp != fp) + free_fp = 0; + else + fnic->flogi_resp = NULL; + + if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) + fnic->state = FNIC_IN_ETH_MODE; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (free_fp) + dev_kfree_skb_irq(fp_skb(fp)); + } + + handle_flogi_resp_end: + return ret; +} + +/* Returns 1 for a response that matches cached flogi oxid */ +static inline int is_matching_flogi_resp_frame(struct fnic *fnic, + struct fc_frame *fp) +{ + struct fc_frame_header *fh; + int ret = 0; + u32 f_ctl; + + fh = fc_frame_header_get(fp); + f_ctl = ntoh24(fh->fh_f_ctl); + + if (fnic->flogi_oxid == ntohs(fh->fh_ox_id) && + fh->fh_r_ctl == FC_RCTL_ELS_REP && + (f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == FC_FC_EX_CTX && + fh->fh_type == FC_TYPE_ELS) + ret = 1; + + return ret; +} + +static void fnic_rq_cmpl_frame_recv(struct vnic_rq *rq, struct cq_desc + *cq_desc, struct vnic_rq_buf *buf, + int skipped __attribute__((unused)), + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(rq->vdev); + struct sk_buff *skb; + struct fc_frame *fp; + unsigned int eth_hdrs_stripped; + u8 type, color, eop, sop, ingress_port, vlan_stripped; + u8 fcoe = 0, fcoe_sof, fcoe_eof; + u8 fcoe_fc_crc_ok = 1, fcoe_enc_error = 0; + u8 tcp_udp_csum_ok, udp, tcp, ipv4_csum_ok; + u8 ipv6, ipv4, ipv4_fragment, rss_type, csum_not_calc; + u8 fcs_ok = 1, packet_error = 0; + u16 q_number, completed_index, bytes_written = 0, vlan, checksum; + u32 rss_hash; + u16 exchange_id, tmpl; + u8 sof = 0; + u8 eof = 0; + u32 fcp_bytes_written = 0; + unsigned long flags; + + pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len, + PCI_DMA_FROMDEVICE); + skb = buf->os_buf; + buf->os_buf = NULL; + + cq_desc_dec(cq_desc, &type, &color, &q_number, &completed_index); + if (type == CQ_DESC_TYPE_RQ_FCP) { + cq_fcp_rq_desc_dec((struct cq_fcp_rq_desc *)cq_desc, + &type, &color, &q_number, &completed_index, + &eop, &sop, &fcoe_fc_crc_ok, &exchange_id, + &tmpl, &fcp_bytes_written, &sof, &eof, + &ingress_port, &packet_error, + &fcoe_enc_error, &fcs_ok, &vlan_stripped, + &vlan); + eth_hdrs_stripped = 1; + + } else if (type == CQ_DESC_TYPE_RQ_ENET) { + cq_enet_rq_desc_dec((struct cq_enet_rq_desc *)cq_desc, + &type, &color, &q_number, &completed_index, + &ingress_port, &fcoe, &eop, &sop, + &rss_type, &csum_not_calc, &rss_hash, + &bytes_written, &packet_error, + &vlan_stripped, &vlan, &checksum, + &fcoe_sof, &fcoe_fc_crc_ok, + &fcoe_enc_error, &fcoe_eof, + &tcp_udp_csum_ok, &udp, &tcp, + &ipv4_csum_ok, &ipv6, &ipv4, + &ipv4_fragment, &fcs_ok); + eth_hdrs_stripped = 0; + + } else { + /* wrong CQ type*/ + shost_printk(KERN_ERR, fnic->lport->host, + "fnic rq_cmpl wrong cq type x%x\n", type); + goto drop; + } + + if (!fcs_ok || packet_error || !fcoe_fc_crc_ok || fcoe_enc_error) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "fnic rq_cmpl fcoe x%x fcsok x%x" + " pkterr x%x fcoe_fc_crc_ok x%x, fcoe_enc_err" + " x%x\n", + fcoe, fcs_ok, packet_error, + fcoe_fc_crc_ok, fcoe_enc_error); + goto drop; + } + + if (eth_hdrs_stripped) + fnic_import_rq_fc_frame(skb, fcp_bytes_written, sof, eof); + else if (fnic_import_rq_eth_pkt(skb, bytes_written)) + goto drop; + + fp = (struct fc_frame *)skb; + + /* + * If frame is an ELS response that matches the cached FLOGI OX_ID, + * and is accept, issue flogi_reg_request copy wq request to firmware + * to register the S_ID and determine whether FC_OUI mode or GW mode. + */ + if (is_matching_flogi_resp_frame(fnic, fp)) { + if (!eth_hdrs_stripped) { + if (fc_frame_payload_op(fp) == ELS_LS_ACC) { + fnic_handle_flogi_resp(fnic, fp); + return; + } + /* + * Recd. Flogi reject. No point registering + * with fw, but forward to libFC + */ + goto forward; + } + goto drop; + } + if (!eth_hdrs_stripped) + goto drop; + +forward: + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + goto drop; + } + /* Use fr_flags to indicate whether succ. flogi resp or not */ + fr_flags(fp) = 0; + fr_dev(fp) = fnic->lport; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + skb_queue_tail(&fnic->frame_queue, skb); + queue_work(fnic_event_queue, &fnic->frame_work); + + return; +drop: + dev_kfree_skb_irq(skb); +} + +static int fnic_rq_cmpl_handler_cont(struct vnic_dev *vdev, + struct cq_desc *cq_desc, u8 type, + u16 q_number, u16 completed_index, + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + + vnic_rq_service(&fnic->rq[q_number], cq_desc, completed_index, + VNIC_RQ_RETURN_DESC, fnic_rq_cmpl_frame_recv, + NULL); + return 0; +} + +int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do) +{ + unsigned int tot_rq_work_done = 0, cur_work_done; + unsigned int i; + int err; + + for (i = 0; i < fnic->rq_count; i++) { + cur_work_done = vnic_cq_service(&fnic->cq[i], rq_work_to_do, + fnic_rq_cmpl_handler_cont, + NULL); + if (cur_work_done) { + err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame); + if (err) + shost_printk(KERN_ERR, fnic->lport->host, + "fnic_alloc_rq_frame cant alloc" + " frame\n"); + } + tot_rq_work_done += cur_work_done; + } + + return tot_rq_work_done; +} + +/* + * This function is called once at init time to allocate and fill RQ + * buffers. Subsequently, it is called in the interrupt context after RQ + * buffer processing to replenish the buffers in the RQ + */ +int fnic_alloc_rq_frame(struct vnic_rq *rq) +{ + struct fnic *fnic = vnic_dev_priv(rq->vdev); + struct sk_buff *skb; + u16 len; + dma_addr_t pa; + + len = FC_FRAME_HEADROOM + FC_MAX_FRAME + FC_FRAME_TAILROOM; + skb = dev_alloc_skb(len); + if (!skb) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Unable to allocate RQ sk_buff\n"); + return -ENOMEM; + } + skb_reset_mac_header(skb); + skb_reset_transport_header(skb); + skb_reset_network_header(skb); + skb_put(skb, len); + pa = pci_map_single(fnic->pdev, skb->data, len, PCI_DMA_FROMDEVICE); + fnic_queue_rq_desc(rq, skb, pa, len); + return 0; +} + +void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf) +{ + struct fc_frame *fp = buf->os_buf; + struct fnic *fnic = vnic_dev_priv(rq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len, + PCI_DMA_FROMDEVICE); + + dev_kfree_skb(fp_skb(fp)); + buf->os_buf = NULL; +} + +static inline int is_flogi_frame(struct fc_frame_header *fh) +{ + return fh->fh_r_ctl == FC_RCTL_ELS_REQ && *(u8 *)(fh + 1) == ELS_FLOGI; +} + +int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp) +{ + struct vnic_wq *wq = &fnic->wq[0]; + struct sk_buff *skb; + dma_addr_t pa; + struct ethhdr *eth_hdr; + struct vlan_ethhdr *vlan_hdr; + struct fcoe_hdr *fcoe_hdr; + struct fc_frame_header *fh; + u32 tot_len, eth_hdr_len; + int ret = 0; + unsigned long flags; + + fh = fc_frame_header_get(fp); + skb = fp_skb(fp); + + if (!fnic->vlan_hw_insert) { + eth_hdr_len = sizeof(*vlan_hdr) + sizeof(*fcoe_hdr); + vlan_hdr = (struct vlan_ethhdr *)skb_push(skb, eth_hdr_len); + eth_hdr = (struct ethhdr *)vlan_hdr; + vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q); + vlan_hdr->h_vlan_encapsulated_proto = htons(ETH_P_FCOE); + vlan_hdr->h_vlan_TCI = htons(fnic->vlan_id); + fcoe_hdr = (struct fcoe_hdr *)(vlan_hdr + 1); + } else { + eth_hdr_len = sizeof(*eth_hdr) + sizeof(*fcoe_hdr); + eth_hdr = (struct ethhdr *)skb_push(skb, eth_hdr_len); + eth_hdr->h_proto = htons(ETH_P_FCOE); + fcoe_hdr = (struct fcoe_hdr *)(eth_hdr + 1); + } + + if (is_flogi_frame(fh)) { + fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id); + memcpy(eth_hdr->h_source, fnic->mac_addr, ETH_ALEN); + } else { + if (fnic->fcoui_mode) + fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id); + else + memcpy(eth_hdr->h_dest, fnic->dest_addr, ETH_ALEN); + memcpy(eth_hdr->h_source, fnic->data_src_addr, ETH_ALEN); + } + + tot_len = skb->len; + BUG_ON(tot_len % 4); + + memset(fcoe_hdr, 0, sizeof(*fcoe_hdr)); + fcoe_hdr->fcoe_sof = fr_sof(fp); + if (FC_FCOE_VER) + FC_FCOE_ENCAPS_VER(fcoe_hdr, FC_FCOE_VER); + + pa = pci_map_single(fnic->pdev, eth_hdr, tot_len, PCI_DMA_TODEVICE); + + spin_lock_irqsave(&fnic->wq_lock[0], flags); + + if (!vnic_wq_desc_avail(wq)) { + pci_unmap_single(fnic->pdev, pa, + tot_len, PCI_DMA_TODEVICE); + ret = -1; + goto fnic_send_frame_end; + } + + fnic_queue_wq_desc(wq, skb, pa, tot_len, fr_eof(fp), + fnic->vlan_hw_insert, fnic->vlan_id, 1, 1, 1); +fnic_send_frame_end: + spin_unlock_irqrestore(&fnic->wq_lock[0], flags); + + if (ret) + dev_kfree_skb_any(fp_skb(fp)); + + return ret; +} + +/* + * fnic_send + * Routine to send a raw frame + */ +int fnic_send(struct fc_lport *lp, struct fc_frame *fp) +{ + struct fnic *fnic = lport_priv(lp); + struct fc_frame_header *fh; + int ret = 0; + enum fnic_state old_state; + unsigned long flags; + struct fc_frame *old_flogi = NULL; + struct fc_frame *old_flogi_resp = NULL; + + if (fnic->in_remove) { + dev_kfree_skb(fp_skb(fp)); + ret = -1; + goto fnic_send_end; + } + + fh = fc_frame_header_get(fp); + /* if not an Flogi frame, send it out, this is the common case */ + if (!is_flogi_frame(fh)) + return fnic_send_frame(fnic, fp); + + /* Flogi frame, now enter the state machine */ + + spin_lock_irqsave(&fnic->fnic_lock, flags); +again: + /* Get any old cached frames, free them after dropping lock */ + old_flogi = fnic->flogi; + fnic->flogi = NULL; + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + + fnic->flogi_oxid = FC_XID_UNKNOWN; + + old_state = fnic->state; + switch (old_state) { + case FNIC_IN_FC_MODE: + case FNIC_IN_ETH_TRANS_FC_MODE: + default: + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (old_flogi) { + dev_kfree_skb(fp_skb(old_flogi)); + old_flogi = NULL; + } + if (old_flogi_resp) { + dev_kfree_skb(fp_skb(old_flogi_resp)); + old_flogi_resp = NULL; + } + + ret = fnic_fw_reset_handler(fnic); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state != FNIC_IN_FC_TRANS_ETH_MODE) + goto again; + if (ret) { + fnic->state = old_state; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb(fp_skb(fp)); + goto fnic_send_end; + } + old_flogi = fnic->flogi; + fnic->flogi = fp; + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + break; + + case FNIC_IN_FC_TRANS_ETH_MODE: + /* + * A reset is pending with the firmware. Store the flogi + * and its oxid. The transition out of this state happens + * only when Firmware completes the reset, either with + * success or failed. If success, transition to + * FNIC_IN_ETH_MODE, if fail, then transition to + * FNIC_IN_FC_MODE + */ + fnic->flogi = fp; + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + break; + + case FNIC_IN_ETH_MODE: + /* + * The fw/hw is already in eth mode. Store the oxid, + * and send the flogi frame out. The transition out of this + * state happens only we receive flogi response from the + * network, and the oxid matches the cached oxid when the + * flogi frame was sent out. If they match, then we issue + * a flogi_reg request and transition to state + * FNIC_IN_ETH_TRANS_FC_MODE + */ + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + ret = fnic_send_frame(fnic, fp); + break; + } + +fnic_send_end: + if (old_flogi) + dev_kfree_skb(fp_skb(old_flogi)); + if (old_flogi_resp) + dev_kfree_skb(fp_skb(old_flogi_resp)); + return ret; +} + +static void fnic_wq_complete_frame_send(struct vnic_wq *wq, + struct cq_desc *cq_desc, + struct vnic_wq_buf *buf, void *opaque) +{ + struct sk_buff *skb = buf->os_buf; + struct fc_frame *fp = (struct fc_frame *)skb; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, + buf->len, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(fp_skb(fp)); + buf->os_buf = NULL; +} + +static int fnic_wq_cmpl_handler_cont(struct vnic_dev *vdev, + struct cq_desc *cq_desc, u8 type, + u16 q_number, u16 completed_index, + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_lock[q_number], flags); + vnic_wq_service(&fnic->wq[q_number], cq_desc, completed_index, + fnic_wq_complete_frame_send, NULL); + spin_unlock_irqrestore(&fnic->wq_lock[q_number], flags); + + return 0; +} + +int fnic_wq_cmpl_handler(struct fnic *fnic, int work_to_do) +{ + unsigned int wq_work_done = 0; + unsigned int i; + + for (i = 0; i < fnic->raw_wq_count; i++) { + wq_work_done += vnic_cq_service(&fnic->cq[fnic->rq_count+i], + work_to_do, + fnic_wq_cmpl_handler_cont, + NULL); + } + + return wq_work_done; +} + + +void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf) +{ + struct fc_frame *fp = buf->os_buf; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, + buf->len, PCI_DMA_TODEVICE); + + dev_kfree_skb(fp_skb(fp)); + buf->os_buf = NULL; +} diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h new file mode 100644 index 000000000000..f0b896988cd5 --- /dev/null +++ b/drivers/scsi/fnic/fnic_io.h @@ -0,0 +1,67 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_IO_H_ +#define _FNIC_IO_H_ + +#include + +#define FNIC_DFLT_SG_DESC_CNT 32 +#define FNIC_MAX_SG_DESC_CNT 1024 /* Maximum descriptors per sgl */ +#define FNIC_SG_DESC_ALIGN 16 /* Descriptor address alignment */ + +struct host_sg_desc { + __le64 addr; + __le32 len; + u32 _resvd; +}; + +struct fnic_dflt_sgl_list { + struct host_sg_desc sg_desc[FNIC_DFLT_SG_DESC_CNT]; +}; + +struct fnic_sgl_list { + struct host_sg_desc sg_desc[FNIC_MAX_SG_DESC_CNT]; +}; + +enum fnic_sgl_list_type { + FNIC_SGL_CACHE_DFLT = 0, /* cache with default size sgl */ + FNIC_SGL_CACHE_MAX, /* cache with max size sgl */ + FNIC_SGL_NUM_CACHES /* number of sgl caches */ +}; + +enum fnic_ioreq_state { + FNIC_IOREQ_CMD_PENDING = 0, + FNIC_IOREQ_ABTS_PENDING, + FNIC_IOREQ_ABTS_COMPLETE, + FNIC_IOREQ_CMD_COMPLETE, +}; + +struct fnic_io_req { + struct host_sg_desc *sgl_list; /* sgl list */ + void *sgl_list_alloc; /* sgl list address used for free */ + dma_addr_t sense_buf_pa; /* dma address for sense buffer*/ + dma_addr_t sgl_list_pa; /* dma address for sgl list */ + u16 sgl_cnt; + u8 sgl_type; /* device DMA descriptor list type */ + u8 io_completed:1; /* set to 1 when fw completes IO */ + u32 port_id; /* remote port DID */ + struct completion *abts_done; /* completion for abts */ + struct completion *dr_done; /* completion for device reset */ +}; + +#endif /* _FNIC_IO_H_ */ diff --git a/drivers/scsi/fnic/fnic_isr.c b/drivers/scsi/fnic/fnic_isr.c new file mode 100644 index 000000000000..2b3064828aea --- /dev/null +++ b/drivers/scsi/fnic/fnic_isr.c @@ -0,0 +1,332 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "fnic_io.h" +#include "fnic.h" + +static irqreturn_t fnic_isr_legacy(int irq, void *data) +{ + struct fnic *fnic = data; + u32 pba; + unsigned long work_done = 0; + + pba = vnic_intr_legacy_pba(fnic->legacy_pba); + if (!pba) + return IRQ_NONE; + + if (pba & (1 << FNIC_INTX_NOTIFY)) { + vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_NOTIFY]); + fnic_handle_link_event(fnic); + } + + if (pba & (1 << FNIC_INTX_ERR)) { + vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_ERR]); + fnic_log_q_error(fnic); + } + + if (pba & (1 << FNIC_INTX_WQ_RQ_COPYWQ)) { + work_done += fnic_wq_copy_cmpl_handler(fnic, 8); + work_done += fnic_wq_cmpl_handler(fnic, 4); + work_done += fnic_rq_cmpl_handler(fnic, 4); + + vnic_intr_return_credits(&fnic->intr[FNIC_INTX_WQ_RQ_COPYWQ], + work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + } + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msi(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long work_done = 0; + + work_done += fnic_wq_copy_cmpl_handler(fnic, 8); + work_done += fnic_wq_cmpl_handler(fnic, 4); + work_done += fnic_rq_cmpl_handler(fnic, 4); + + vnic_intr_return_credits(&fnic->intr[0], + work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_rq(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long rq_work_done = 0; + + rq_work_done = fnic_rq_cmpl_handler(fnic, 4); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_RQ], + rq_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_wq(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long wq_work_done = 0; + + wq_work_done = fnic_wq_cmpl_handler(fnic, 4); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ], + wq_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_wq_copy(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long wq_copy_work_done = 0; + + wq_copy_work_done = fnic_wq_copy_cmpl_handler(fnic, 8); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ_COPY], + wq_copy_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_err_notify(int irq, void *data) +{ + struct fnic *fnic = data; + + vnic_intr_return_all_credits(&fnic->intr[FNIC_MSIX_ERR_NOTIFY]); + fnic_log_q_error(fnic); + fnic_handle_link_event(fnic); + + return IRQ_HANDLED; +} + +void fnic_free_intr(struct fnic *fnic) +{ + int i; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_INTX: + case VNIC_DEV_INTR_MODE_MSI: + free_irq(fnic->pdev->irq, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSIX: + for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) + if (fnic->msix[i].requested) + free_irq(fnic->msix_entry[i].vector, + fnic->msix[i].devid); + break; + + default: + break; + } +} + +int fnic_request_intr(struct fnic *fnic) +{ + int err = 0; + int i; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + + case VNIC_DEV_INTR_MODE_INTX: + err = request_irq(fnic->pdev->irq, &fnic_isr_legacy, + IRQF_SHARED, DRV_NAME, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSI: + err = request_irq(fnic->pdev->irq, &fnic_isr_msi, + 0, fnic->name, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSIX: + + sprintf(fnic->msix[FNIC_MSIX_RQ].devname, + "%.11s-fcs-rq", fnic->name); + fnic->msix[FNIC_MSIX_RQ].isr = fnic_isr_msix_rq; + fnic->msix[FNIC_MSIX_RQ].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_WQ].devname, + "%.11s-fcs-wq", fnic->name); + fnic->msix[FNIC_MSIX_WQ].isr = fnic_isr_msix_wq; + fnic->msix[FNIC_MSIX_WQ].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_WQ_COPY].devname, + "%.11s-scsi-wq", fnic->name); + fnic->msix[FNIC_MSIX_WQ_COPY].isr = fnic_isr_msix_wq_copy; + fnic->msix[FNIC_MSIX_WQ_COPY].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_ERR_NOTIFY].devname, + "%.11s-err-notify", fnic->name); + fnic->msix[FNIC_MSIX_ERR_NOTIFY].isr = + fnic_isr_msix_err_notify; + fnic->msix[FNIC_MSIX_ERR_NOTIFY].devid = fnic; + + for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) { + err = request_irq(fnic->msix_entry[i].vector, + fnic->msix[i].isr, 0, + fnic->msix[i].devname, + fnic->msix[i].devid); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "MSIX: request_irq" + " failed %d\n", err); + fnic_free_intr(fnic); + break; + } + fnic->msix[i].requested = 1; + } + break; + + default: + break; + } + + return err; +} + +int fnic_set_intr_mode(struct fnic *fnic) +{ + unsigned int n = ARRAY_SIZE(fnic->rq); + unsigned int m = ARRAY_SIZE(fnic->wq); + unsigned int o = ARRAY_SIZE(fnic->wq_copy); + unsigned int i; + + /* + * Set interrupt mode (INTx, MSI, MSI-X) depending + * system capabilities. + * + * Try MSI-X first + * + * We need n RQs, m WQs, o Copy WQs, n+m+o CQs, and n+m+o+1 INTRs + * (last INTR is used for WQ/RQ errors and notification area) + */ + + BUG_ON(ARRAY_SIZE(fnic->msix_entry) < n + m + o + 1); + for (i = 0; i < n + m + o + 1; i++) + fnic->msix_entry[i].entry = i; + + if (fnic->rq_count >= n && + fnic->raw_wq_count >= m && + fnic->wq_copy_count >= o && + fnic->cq_count >= n + m + o) { + if (!pci_enable_msix(fnic->pdev, fnic->msix_entry, + n + m + o + 1)) { + fnic->rq_count = n; + fnic->raw_wq_count = m; + fnic->wq_copy_count = o; + fnic->wq_count = m + o; + fnic->cq_count = n + m + o; + fnic->intr_count = n + m + o + 1; + fnic->err_intr_offset = FNIC_MSIX_ERR_NOTIFY; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using MSI-X Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, + VNIC_DEV_INTR_MODE_MSIX); + return 0; + } + } + + /* + * Next try MSI + * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 1 INTR + */ + if (fnic->rq_count >= 1 && + fnic->raw_wq_count >= 1 && + fnic->wq_copy_count >= 1 && + fnic->cq_count >= 3 && + fnic->intr_count >= 1 && + !pci_enable_msi(fnic->pdev)) { + + fnic->rq_count = 1; + fnic->raw_wq_count = 1; + fnic->wq_copy_count = 1; + fnic->wq_count = 2; + fnic->cq_count = 3; + fnic->intr_count = 1; + fnic->err_intr_offset = 0; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using MSI Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_MSI); + + return 0; + } + + /* + * Next try INTx + * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 3 INTRs + * 1 INTR is used for all 3 queues, 1 INTR for queue errors + * 1 INTR for notification area + */ + + if (fnic->rq_count >= 1 && + fnic->raw_wq_count >= 1 && + fnic->wq_copy_count >= 1 && + fnic->cq_count >= 3 && + fnic->intr_count >= 3) { + + fnic->rq_count = 1; + fnic->raw_wq_count = 1; + fnic->wq_copy_count = 1; + fnic->cq_count = 3; + fnic->intr_count = 3; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using Legacy Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX); + + return 0; + } + + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_UNKNOWN); + + return -EINVAL; +} + +void fnic_clear_intr_mode(struct fnic *fnic) +{ + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_MSIX: + pci_disable_msix(fnic->pdev); + break; + case VNIC_DEV_INTR_MODE_MSI: + pci_disable_msi(fnic->pdev); + break; + default: + break; + } + + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX); +} + diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c new file mode 100644 index 000000000000..32ef6b87d895 --- /dev/null +++ b/drivers/scsi/fnic/fnic_main.c @@ -0,0 +1,942 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vnic_dev.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "fnic_io.h" +#include "fnic.h" + +#define PCI_DEVICE_ID_CISCO_FNIC 0x0045 + +/* Timer to poll notification area for events. Used for MSI interrupts */ +#define FNIC_NOTIFY_TIMER_PERIOD (2 * HZ) + +static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES]; +static struct kmem_cache *fnic_io_req_cache; +LIST_HEAD(fnic_list); +DEFINE_SPINLOCK(fnic_list_lock); + +/* Supported devices by fnic module */ +static struct pci_device_id fnic_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_FNIC) }, + { 0, } +}; + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("Abhijeet Joglekar , " + "Joseph R. Eykholt "); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, fnic_id_table); + +unsigned int fnic_log_level; +module_param(fnic_log_level, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels"); + + +static struct libfc_function_template fnic_transport_template = { + .frame_send = fnic_send, + .fcp_abort_io = fnic_empty_scsi_cleanup, + .fcp_cleanup = fnic_empty_scsi_cleanup, + .exch_mgr_reset = fnic_exch_mgr_reset +}; + +static int fnic_slave_alloc(struct scsi_device *sdev) +{ + struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); + struct fc_lport *lp = shost_priv(sdev->host); + struct fnic *fnic = lport_priv(lp); + + sdev->tagged_supported = 1; + + if (!rport || fc_remote_port_chkready(rport)) + return -ENXIO; + + scsi_activate_tcq(sdev, FNIC_DFLT_QUEUE_DEPTH); + rport->dev_loss_tmo = fnic->config.port_down_timeout / 1000; + + return 0; +} + +static struct scsi_host_template fnic_host_template = { + .module = THIS_MODULE, + .name = DRV_NAME, + .queuecommand = fnic_queuecommand, + .eh_abort_handler = fnic_abort_cmd, + .eh_device_reset_handler = fnic_device_reset, + .eh_host_reset_handler = fnic_host_reset, + .slave_alloc = fnic_slave_alloc, + .change_queue_depth = fc_change_queue_depth, + .change_queue_type = fc_change_queue_type, + .this_id = -1, + .cmd_per_lun = 3, + .can_queue = FNIC_MAX_IO_REQ, + .use_clustering = ENABLE_CLUSTERING, + .sg_tablesize = FNIC_MAX_SG_DESC_CNT, + .max_sectors = 0xffff, + .shost_attrs = fnic_attrs, +}; + +static void fnic_get_host_speed(struct Scsi_Host *shost); +static struct scsi_transport_template *fnic_fc_transport; +static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *); + +static struct fc_function_template fnic_fc_functions = { + + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_supported_fc4s = 1, + .show_host_active_fc4s = 1, + .show_host_maxframe_size = 1, + .show_host_port_id = 1, + .show_host_supported_speeds = 1, + .get_host_speed = fnic_get_host_speed, + .show_host_speed = 1, + .show_host_port_type = 1, + .get_host_port_state = fc_get_host_port_state, + .show_host_port_state = 1, + .show_host_symbolic_name = 1, + .show_rport_maxframe_size = 1, + .show_rport_supported_classes = 1, + .show_host_fabric_name = 1, + .show_starget_node_name = 1, + .show_starget_port_name = 1, + .show_starget_port_id = 1, + .show_rport_dev_loss_tmo = 1, + .issue_fc_host_lip = fnic_reset, + .get_fc_host_stats = fnic_get_stats, + .dd_fcrport_size = sizeof(struct fc_rport_libfc_priv), + .terminate_rport_io = fnic_terminate_rport_io, +}; + +static void fnic_get_host_speed(struct Scsi_Host *shost) +{ + struct fc_lport *lp = shost_priv(shost); + struct fnic *fnic = lport_priv(lp); + u32 port_speed = vnic_dev_port_speed(fnic->vdev); + + /* Add in other values as they get defined in fw */ + switch (port_speed) { + case 10000: + fc_host_speed(shost) = FC_PORTSPEED_10GBIT; + break; + default: + fc_host_speed(shost) = FC_PORTSPEED_10GBIT; + break; + } +} + +static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *host) +{ + int ret; + struct fc_lport *lp = shost_priv(host); + struct fnic *fnic = lport_priv(lp); + struct fc_host_statistics *stats = &lp->host_stats; + struct vnic_stats *vs; + unsigned long flags; + + if (time_before(jiffies, fnic->stats_time + HZ / FNIC_STATS_RATE_LIMIT)) + return stats; + fnic->stats_time = jiffies; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + ret = vnic_dev_stats_dump(fnic->vdev, &fnic->stats); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (ret) { + FNIC_MAIN_DBG(KERN_DEBUG, fnic->lport->host, + "fnic: Get vnic stats failed" + " 0x%x", ret); + return stats; + } + vs = fnic->stats; + stats->tx_frames = vs->tx.tx_unicast_frames_ok; + stats->tx_words = vs->tx.tx_unicast_bytes_ok / 4; + stats->rx_frames = vs->rx.rx_unicast_frames_ok; + stats->rx_words = vs->rx.rx_unicast_bytes_ok / 4; + stats->error_frames = vs->tx.tx_errors + vs->rx.rx_errors; + stats->dumped_frames = vs->tx.tx_drops + vs->rx.rx_drop; + stats->invalid_crc_count = vs->rx.rx_crc_errors; + stats->seconds_since_last_reset = (jiffies - lp->boot_time) / HZ; + stats->fcp_input_megabytes = div_u64(fnic->fcp_input_bytes, 1000000); + stats->fcp_output_megabytes = div_u64(fnic->fcp_output_bytes, 1000000); + + return stats; +} + +void fnic_log_q_error(struct fnic *fnic) +{ + unsigned int i; + u32 error_status; + + for (i = 0; i < fnic->raw_wq_count; i++) { + error_status = ioread32(&fnic->wq[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "WQ[%d] error_status" + " %d\n", i, error_status); + } + + for (i = 0; i < fnic->rq_count; i++) { + error_status = ioread32(&fnic->rq[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "RQ[%d] error_status" + " %d\n", i, error_status); + } + + for (i = 0; i < fnic->wq_copy_count; i++) { + error_status = ioread32(&fnic->wq_copy[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "CWQ[%d] error_status" + " %d\n", i, error_status); + } +} + +void fnic_handle_link_event(struct fnic *fnic) +{ + unsigned long flags; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + queue_work(fnic_event_queue, &fnic->link_work); + +} + +static int fnic_notify_set(struct fnic *fnic) +{ + int err; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_INTX: + err = vnic_dev_notify_set(fnic->vdev, FNIC_INTX_NOTIFY); + break; + case VNIC_DEV_INTR_MODE_MSI: + err = vnic_dev_notify_set(fnic->vdev, -1); + break; + case VNIC_DEV_INTR_MODE_MSIX: + err = vnic_dev_notify_set(fnic->vdev, FNIC_MSIX_ERR_NOTIFY); + break; + default: + shost_printk(KERN_ERR, fnic->lport->host, + "Interrupt mode should be set up" + " before devcmd notify set %d\n", + vnic_dev_get_intr_mode(fnic->vdev)); + err = -1; + break; + } + + return err; +} + +static void fnic_notify_timer(unsigned long data) +{ + struct fnic *fnic = (struct fnic *)data; + + fnic_handle_link_event(fnic); + mod_timer(&fnic->notify_timer, + round_jiffies(jiffies + FNIC_NOTIFY_TIMER_PERIOD)); +} + +static void fnic_notify_timer_start(struct fnic *fnic) +{ + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_MSI: + /* + * Schedule first timeout immediately. The driver is + * initiatialized and ready to look for link up notification + */ + mod_timer(&fnic->notify_timer, jiffies); + break; + default: + /* Using intr for notification for INTx/MSI-X */ + break; + }; +} + +static int fnic_dev_wait(struct vnic_dev *vdev, + int (*start)(struct vnic_dev *, int), + int (*finished)(struct vnic_dev *, int *), + int arg) +{ + unsigned long time; + int done; + int err; + + err = start(vdev, arg); + if (err) + return err; + + /* Wait for func to complete...2 seconds max */ + time = jiffies + (HZ * 2); + do { + err = finished(vdev, &done); + if (err) + return err; + if (done) + return 0; + schedule_timeout_uninterruptible(HZ / 10); + } while (time_after(time, jiffies)); + + return -ETIMEDOUT; +} + +static int fnic_cleanup(struct fnic *fnic) +{ + unsigned int i; + int err; + unsigned long flags; + struct fc_frame *flogi = NULL; + struct fc_frame *flogi_resp = NULL; + + vnic_dev_disable(fnic->vdev); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_mask(&fnic->intr[i]); + + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_disable(&fnic->rq[i]); + if (err) + return err; + } + for (i = 0; i < fnic->raw_wq_count; i++) { + err = vnic_wq_disable(&fnic->wq[i]); + if (err) + return err; + } + for (i = 0; i < fnic->wq_copy_count; i++) { + err = vnic_wq_copy_disable(&fnic->wq_copy[i]); + if (err) + return err; + } + + /* Clean up completed IOs and FCS frames */ + fnic_wq_copy_cmpl_handler(fnic, -1); + fnic_wq_cmpl_handler(fnic, -1); + fnic_rq_cmpl_handler(fnic, -1); + + /* Clean up the IOs and FCS frames that have not completed */ + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_clean(&fnic->wq[i], fnic_free_wq_buf); + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf); + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_clean(&fnic->wq_copy[i], + fnic_wq_copy_cleanup_handler); + + for (i = 0; i < fnic->cq_count; i++) + vnic_cq_clean(&fnic->cq[i]); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_clean(&fnic->intr[i]); + + /* + * Remove cached flogi and flogi resp frames if any + * These frames are not in any queue, and therefore queue + * cleanup does not clean them. So clean them explicitly + */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + flogi = fnic->flogi; + fnic->flogi = NULL; + flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (flogi) + dev_kfree_skb(fp_skb(flogi)); + + if (flogi_resp) + dev_kfree_skb(fp_skb(flogi_resp)); + + mempool_destroy(fnic->io_req_pool); + for (i = 0; i < FNIC_SGL_NUM_CACHES; i++) + mempool_destroy(fnic->io_sgl_pool[i]); + + return 0; +} + +static void fnic_iounmap(struct fnic *fnic) +{ + if (fnic->bar0.vaddr) + iounmap(fnic->bar0.vaddr); +} + +/* + * Allocate element for mempools requiring GFP_DMA flag. + * Otherwise, checks in kmem_flagcheck() hit BUG_ON(). + */ +static void *fnic_alloc_slab_dma(gfp_t gfp_mask, void *pool_data) +{ + struct kmem_cache *mem = pool_data; + + return kmem_cache_alloc(mem, gfp_mask | GFP_ATOMIC | GFP_DMA); +} + +static int __devinit fnic_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct Scsi_Host *host; + struct fc_lport *lp; + struct fnic *fnic; + mempool_t *pool; + int err; + int i; + unsigned long flags; + + /* + * Allocate SCSI Host and set up association between host, + * local port, and fnic + */ + host = scsi_host_alloc(&fnic_host_template, + sizeof(struct fc_lport) + sizeof(struct fnic)); + if (!host) { + printk(KERN_ERR PFX "Unable to alloc SCSI host\n"); + err = -ENOMEM; + goto err_out; + } + lp = shost_priv(host); + lp->host = host; + fnic = lport_priv(lp); + fnic->lport = lp; + + snprintf(fnic->name, sizeof(fnic->name) - 1, "%s%d", DRV_NAME, + host->host_no); + + host->transportt = fnic_fc_transport; + + err = scsi_init_shared_tag_map(host, FNIC_MAX_IO_REQ); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to alloc shared tag map\n"); + goto err_out_free_hba; + } + + /* Setup PCI resources */ + pci_set_drvdata(pdev, fnic); + + fnic->pdev = pdev; + + err = pci_enable_device(pdev); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot enable PCI device, aborting.\n"); + goto err_out_free_hba; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot enable PCI resources, aborting\n"); + goto err_out_disable_device; + } + + pci_set_master(pdev); + + /* Query PCI controller on system for DMA addressing + * limitation for the device. Try 40-bit first, and + * fail to 32-bit. + */ + err = pci_set_dma_mask(pdev, DMA_40BIT_MASK); + if (err) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "No usable DMA configuration " + "aborting\n"); + goto err_out_release_regions; + } + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to obtain 32-bit DMA " + "for consistent allocations, aborting.\n"); + goto err_out_release_regions; + } + } else { + err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to obtain 40-bit DMA " + "for consistent allocations, aborting.\n"); + goto err_out_release_regions; + } + } + + /* Map vNIC resources from BAR0 */ + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + shost_printk(KERN_ERR, fnic->lport->host, + "BAR0 not memory-map'able, aborting.\n"); + err = -ENODEV; + goto err_out_release_regions; + } + + fnic->bar0.vaddr = pci_iomap(pdev, 0, 0); + fnic->bar0.bus_addr = pci_resource_start(pdev, 0); + fnic->bar0.len = pci_resource_len(pdev, 0); + + if (!fnic->bar0.vaddr) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot memory-map BAR0 res hdr, " + "aborting.\n"); + err = -ENODEV; + goto err_out_release_regions; + } + + fnic->vdev = vnic_dev_register(NULL, fnic, pdev, &fnic->bar0); + if (!fnic->vdev) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC registration failed, " + "aborting.\n"); + err = -ENODEV; + goto err_out_iounmap; + } + + err = fnic_dev_wait(fnic->vdev, vnic_dev_open, + vnic_dev_open_done, 0); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC dev open failed, aborting.\n"); + goto err_out_vnic_unregister; + } + + err = vnic_dev_init(fnic->vdev, 0); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC dev init failed, aborting.\n"); + goto err_out_dev_close; + } + + err = vnic_dev_mac_addr(fnic->vdev, fnic->mac_addr); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC get MAC addr failed \n"); + goto err_out_dev_close; + } + + /* Get vNIC configuration */ + err = fnic_get_vnic_config(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Get vNIC configuration failed, " + "aborting.\n"); + goto err_out_dev_close; + } + host->max_lun = fnic->config.luns_per_tgt; + host->max_id = FNIC_MAX_FCP_TARGET; + + fnic_get_res_counts(fnic); + + err = fnic_set_intr_mode(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to set intr mode, " + "aborting.\n"); + goto err_out_dev_close; + } + + err = fnic_request_intr(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to request irq.\n"); + goto err_out_clear_intr; + } + + err = fnic_alloc_vnic_resources(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to alloc vNIC resources, " + "aborting.\n"); + goto err_out_free_intr; + } + + + /* initialize all fnic locks */ + spin_lock_init(&fnic->fnic_lock); + + for (i = 0; i < FNIC_WQ_MAX; i++) + spin_lock_init(&fnic->wq_lock[i]); + + for (i = 0; i < FNIC_WQ_COPY_MAX; i++) { + spin_lock_init(&fnic->wq_copy_lock[i]); + fnic->wq_copy_desc_low[i] = DESC_CLEAN_LOW_WATERMARK; + fnic->fw_ack_recd[i] = 0; + fnic->fw_ack_index[i] = -1; + } + + for (i = 0; i < FNIC_IO_LOCKS; i++) + spin_lock_init(&fnic->io_req_lock[i]); + + fnic->io_req_pool = mempool_create_slab_pool(2, fnic_io_req_cache); + if (!fnic->io_req_pool) + goto err_out_free_resources; + + pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab, + fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); + if (!pool) + goto err_out_free_ioreq_pool; + fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT] = pool; + + pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab, + fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); + if (!pool) + goto err_out_free_dflt_pool; + fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX] = pool; + + /* setup vlan config, hw inserts vlan header */ + fnic->vlan_hw_insert = 1; + fnic->vlan_id = 0; + + fnic->flogi_oxid = FC_XID_UNKNOWN; + fnic->flogi = NULL; + fnic->flogi_resp = NULL; + fnic->state = FNIC_IN_FC_MODE; + + /* Enable hardware stripping of vlan header on ingress */ + fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1); + + /* Setup notification buffer area */ + err = fnic_notify_set(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to alloc notify buffer, aborting.\n"); + goto err_out_free_max_pool; + } + + /* Setup notify timer when using MSI interrupts */ + if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI) + setup_timer(&fnic->notify_timer, + fnic_notify_timer, (unsigned long)fnic); + + /* allocate RQ buffers and post them to RQ*/ + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "fnic_alloc_rq_frame can't alloc " + "frame\n"); + goto err_out_free_rq_buf; + } + } + + /* + * Initialization done with PCI system, hardware, firmware. + * Add host to SCSI + */ + err = scsi_add_host(lp->host, &pdev->dev); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "fnic: scsi_add_host failed...exiting\n"); + goto err_out_free_rq_buf; + } + + /* Start local port initiatialization */ + + lp->link_up = 0; + lp->tt = fnic_transport_template; + + lp->emp = fc_exch_mgr_alloc(lp, FC_CLASS_3, + FCPIO_HOST_EXCH_RANGE_START, + FCPIO_HOST_EXCH_RANGE_END); + if (!lp->emp) { + err = -ENOMEM; + goto err_out_remove_scsi_host; + } + + lp->max_retry_count = fnic->config.flogi_retries; + lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS | + FCP_SPPF_CONF_COMPL); + if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) + lp->service_params |= FCP_SPPF_RETRY; + + lp->boot_time = jiffies; + lp->e_d_tov = fnic->config.ed_tov; + lp->r_a_tov = fnic->config.ra_tov; + lp->link_supported_speeds = FC_PORTSPEED_10GBIT; + fc_set_wwnn(lp, fnic->config.node_wwn); + fc_set_wwpn(lp, fnic->config.port_wwn); + + fc_exch_init(lp); + fc_lport_init(lp); + fc_elsct_init(lp); + fc_rport_init(lp); + fc_disc_init(lp); + + fc_lport_config(lp); + + if (fc_set_mfs(lp, fnic->config.maxdatafieldsize + + sizeof(struct fc_frame_header))) { + err = -EINVAL; + goto err_out_free_exch_mgr; + } + fc_host_maxframe_size(lp->host) = lp->mfs; + + sprintf(fc_host_symbolic_name(lp->host), + DRV_NAME " v" DRV_VERSION " over %s", fnic->name); + + spin_lock_irqsave(&fnic_list_lock, flags); + list_add_tail(&fnic->list, &fnic_list); + spin_unlock_irqrestore(&fnic_list_lock, flags); + + INIT_WORK(&fnic->link_work, fnic_handle_link); + INIT_WORK(&fnic->frame_work, fnic_handle_frame); + skb_queue_head_init(&fnic->frame_queue); + + /* Enable all queues */ + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_enable(&fnic->wq[i]); + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_enable(&fnic->rq[i]); + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_enable(&fnic->wq_copy[i]); + + fc_fabric_login(lp); + + vnic_dev_enable(fnic->vdev); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_unmask(&fnic->intr[i]); + + fnic_notify_timer_start(fnic); + + return 0; + +err_out_free_exch_mgr: + fc_exch_mgr_free(lp->emp); +err_out_remove_scsi_host: + fc_remove_host(fnic->lport->host); + scsi_remove_host(fnic->lport->host); +err_out_free_rq_buf: + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf); + vnic_dev_notify_unset(fnic->vdev); +err_out_free_max_pool: + mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX]); +err_out_free_dflt_pool: + mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT]); +err_out_free_ioreq_pool: + mempool_destroy(fnic->io_req_pool); +err_out_free_resources: + fnic_free_vnic_resources(fnic); +err_out_free_intr: + fnic_free_intr(fnic); +err_out_clear_intr: + fnic_clear_intr_mode(fnic); +err_out_dev_close: + vnic_dev_close(fnic->vdev); +err_out_vnic_unregister: + vnic_dev_unregister(fnic->vdev); +err_out_iounmap: + fnic_iounmap(fnic); +err_out_release_regions: + pci_release_regions(pdev); +err_out_disable_device: + pci_disable_device(pdev); +err_out_free_hba: + scsi_host_put(lp->host); +err_out: + return err; +} + +static void __devexit fnic_remove(struct pci_dev *pdev) +{ + struct fnic *fnic = pci_get_drvdata(pdev); + unsigned long flags; + + /* + * Mark state so that the workqueue thread stops forwarding + * received frames and link events to the local port. ISR and + * other threads that can queue work items will also stop + * creating work items on the fnic workqueue + */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->stop_rx_link_events = 1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI) + del_timer_sync(&fnic->notify_timer); + + /* + * Flush the fnic event queue. After this call, there should + * be no event queued for this fnic device in the workqueue + */ + flush_workqueue(fnic_event_queue); + skb_queue_purge(&fnic->frame_queue); + + /* + * Log off the fabric. This stops all remote ports, dns port, + * logs off the fabric. This flushes all rport, disc, lport work + * before returning + */ + fc_fabric_logoff(fnic->lport); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->in_remove = 1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + fc_lport_destroy(fnic->lport); + + /* + * This stops the fnic device, masks all interrupts. Completed + * CQ entries are drained. Posted WQ/RQ/Copy-WQ entries are + * cleaned up + */ + fnic_cleanup(fnic); + + BUG_ON(!skb_queue_empty(&fnic->frame_queue)); + + spin_lock_irqsave(&fnic_list_lock, flags); + list_del(&fnic->list); + spin_unlock_irqrestore(&fnic_list_lock, flags); + + fc_remove_host(fnic->lport->host); + scsi_remove_host(fnic->lport->host); + fc_exch_mgr_free(fnic->lport->emp); + vnic_dev_notify_unset(fnic->vdev); + fnic_free_vnic_resources(fnic); + fnic_free_intr(fnic); + fnic_clear_intr_mode(fnic); + vnic_dev_close(fnic->vdev); + vnic_dev_unregister(fnic->vdev); + fnic_iounmap(fnic); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + scsi_host_put(fnic->lport->host); +} + +static struct pci_driver fnic_driver = { + .name = DRV_NAME, + .id_table = fnic_id_table, + .probe = fnic_probe, + .remove = __devexit_p(fnic_remove), +}; + +static int __init fnic_init_module(void) +{ + size_t len; + int err = 0; + + printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION); + + /* Create a cache for allocation of default size sgls */ + len = sizeof(struct fnic_dflt_sgl_list); + fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create + ("fnic_sgl_dflt", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN, + SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA, + NULL); + if (!fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]) { + printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n"); + err = -ENOMEM; + goto err_create_fnic_sgl_slab_dflt; + } + + /* Create a cache for allocation of max size sgls*/ + len = sizeof(struct fnic_sgl_list); + fnic_sgl_cache[FNIC_SGL_CACHE_MAX] = kmem_cache_create + ("fnic_sgl_max", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN, + SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA, + NULL); + if (!fnic_sgl_cache[FNIC_SGL_CACHE_MAX]) { + printk(KERN_ERR PFX "failed to create fnic max sgl slab\n"); + err = -ENOMEM; + goto err_create_fnic_sgl_slab_max; + } + + /* Create a cache of io_req structs for use via mempool */ + fnic_io_req_cache = kmem_cache_create("fnic_io_req", + sizeof(struct fnic_io_req), + 0, SLAB_HWCACHE_ALIGN, NULL); + if (!fnic_io_req_cache) { + printk(KERN_ERR PFX "failed to create fnic io_req slab\n"); + err = -ENOMEM; + goto err_create_fnic_ioreq_slab; + } + + fnic_event_queue = create_singlethread_workqueue("fnic_event_wq"); + if (!fnic_event_queue) { + printk(KERN_ERR PFX "fnic work queue create failed\n"); + err = -ENOMEM; + goto err_create_fnic_workq; + } + + spin_lock_init(&fnic_list_lock); + INIT_LIST_HEAD(&fnic_list); + + fnic_fc_transport = fc_attach_transport(&fnic_fc_functions); + if (!fnic_fc_transport) { + printk(KERN_ERR PFX "fc_attach_transport error\n"); + err = -ENOMEM; + goto err_fc_transport; + } + + /* register the driver with PCI system */ + err = pci_register_driver(&fnic_driver); + if (err < 0) { + printk(KERN_ERR PFX "pci register error\n"); + goto err_pci_register; + } + return err; + +err_pci_register: + fc_release_transport(fnic_fc_transport); +err_fc_transport: + destroy_workqueue(fnic_event_queue); +err_create_fnic_workq: + kmem_cache_destroy(fnic_io_req_cache); +err_create_fnic_ioreq_slab: + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); +err_create_fnic_sgl_slab_max: + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); +err_create_fnic_sgl_slab_dflt: + return err; +} + +static void __exit fnic_cleanup_module(void) +{ + pci_unregister_driver(&fnic_driver); + destroy_workqueue(fnic_event_queue); + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); + kmem_cache_destroy(fnic_io_req_cache); + fc_release_transport(fnic_fc_transport); +} + +module_init(fnic_init_module); +module_exit(fnic_cleanup_module); + diff --git a/drivers/scsi/fnic/fnic_res.c b/drivers/scsi/fnic/fnic_res.c new file mode 100644 index 000000000000..7ba61ec715d2 --- /dev/null +++ b/drivers/scsi/fnic/fnic_res.c @@ -0,0 +1,444 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "wq_enet_desc.h" +#include "rq_enet_desc.h" +#include "cq_enet_desc.h" +#include "vnic_resource.h" +#include "vnic_dev.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "vnic_cq.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "vnic_nic.h" +#include "fnic.h" + +int fnic_get_vnic_config(struct fnic *fnic) +{ + struct vnic_fc_config *c = &fnic->config; + int err; + +#define GET_CONFIG(m) \ + do { \ + err = vnic_dev_spec(fnic->vdev, \ + offsetof(struct vnic_fc_config, m), \ + sizeof(c->m), &c->m); \ + if (err) { \ + shost_printk(KERN_ERR, fnic->lport->host, \ + "Error getting %s, %d\n", #m, \ + err); \ + return err; \ + } \ + } while (0); + + GET_CONFIG(node_wwn); + GET_CONFIG(port_wwn); + GET_CONFIG(wq_enet_desc_count); + GET_CONFIG(wq_copy_desc_count); + GET_CONFIG(rq_desc_count); + GET_CONFIG(maxdatafieldsize); + GET_CONFIG(ed_tov); + GET_CONFIG(ra_tov); + GET_CONFIG(intr_timer); + GET_CONFIG(intr_timer_type); + GET_CONFIG(flags); + GET_CONFIG(flogi_retries); + GET_CONFIG(flogi_timeout); + GET_CONFIG(plogi_retries); + GET_CONFIG(plogi_timeout); + GET_CONFIG(io_throttle_count); + GET_CONFIG(link_down_timeout); + GET_CONFIG(port_down_timeout); + GET_CONFIG(port_down_io_retries); + GET_CONFIG(luns_per_tgt); + + c->wq_enet_desc_count = + min_t(u32, VNIC_FNIC_WQ_DESCS_MAX, + max_t(u32, VNIC_FNIC_WQ_DESCS_MIN, + c->wq_enet_desc_count)); + c->wq_enet_desc_count = ALIGN(c->wq_enet_desc_count, 16); + + c->wq_copy_desc_count = + min_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MAX, + max_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MIN, + c->wq_copy_desc_count)); + c->wq_copy_desc_count = ALIGN(c->wq_copy_desc_count, 16); + + c->rq_desc_count = + min_t(u32, VNIC_FNIC_RQ_DESCS_MAX, + max_t(u32, VNIC_FNIC_RQ_DESCS_MIN, + c->rq_desc_count)); + c->rq_desc_count = ALIGN(c->rq_desc_count, 16); + + c->maxdatafieldsize = + min_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MAX, + max_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MIN, + c->maxdatafieldsize)); + c->ed_tov = + min_t(u32, VNIC_FNIC_EDTOV_MAX, + max_t(u32, VNIC_FNIC_EDTOV_MIN, + c->ed_tov)); + + c->ra_tov = + min_t(u32, VNIC_FNIC_RATOV_MAX, + max_t(u32, VNIC_FNIC_RATOV_MIN, + c->ra_tov)); + + c->flogi_retries = + min_t(u32, VNIC_FNIC_FLOGI_RETRIES_MAX, c->flogi_retries); + + c->flogi_timeout = + min_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MAX, + max_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MIN, + c->flogi_timeout)); + + c->plogi_retries = + min_t(u32, VNIC_FNIC_PLOGI_RETRIES_MAX, c->plogi_retries); + + c->plogi_timeout = + min_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MAX, + max_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MIN, + c->plogi_timeout)); + + c->io_throttle_count = + min_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MAX, + max_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MIN, + c->io_throttle_count)); + + c->link_down_timeout = + min_t(u32, VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX, + c->link_down_timeout); + + c->port_down_timeout = + min_t(u32, VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX, + c->port_down_timeout); + + c->port_down_io_retries = + min_t(u32, VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX, + c->port_down_io_retries); + + c->luns_per_tgt = + min_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MAX, + max_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MIN, + c->luns_per_tgt)); + + c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer); + c->intr_timer_type = c->intr_timer_type; + + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC MAC addr %02x:%02x:%02x:%02x:%02x:%02x " + "wq/wq_copy/rq %d/%d/%d\n", + fnic->mac_addr[0], fnic->mac_addr[1], fnic->mac_addr[2], + fnic->mac_addr[3], fnic->mac_addr[4], fnic->mac_addr[5], + c->wq_enet_desc_count, c->wq_copy_desc_count, + c->rq_desc_count); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC node wwn %llx port wwn %llx\n", + c->node_wwn, c->port_wwn); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC ed_tov %d ra_tov %d\n", + c->ed_tov, c->ra_tov); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC mtu %d intr timer %d\n", + c->maxdatafieldsize, c->intr_timer); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC flags 0x%x luns per tgt %d\n", + c->flags, c->luns_per_tgt); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC flogi_retries %d flogi timeout %d\n", + c->flogi_retries, c->flogi_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC plogi retries %d plogi timeout %d\n", + c->plogi_retries, c->plogi_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC io throttle count %d link dn timeout %d\n", + c->io_throttle_count, c->link_down_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC port dn io retries %d port dn timeout %d\n", + c->port_down_io_retries, c->port_down_timeout); + + return 0; +} + +int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu, + u8 rss_hash_type, + u8 rss_hash_bits, u8 rss_base_cpu, u8 rss_enable, + u8 tso_ipid_split_en, u8 ig_vlan_strip_en) +{ + u64 a0, a1; + u32 nic_cfg; + int wait = 1000; + + vnic_set_nic_cfg(&nic_cfg, rss_default_cpu, + rss_hash_type, rss_hash_bits, rss_base_cpu, + rss_enable, tso_ipid_split_en, ig_vlan_strip_en); + + a0 = nic_cfg; + a1 = 0; + + return vnic_dev_cmd(fnic->vdev, CMD_NIC_CFG, &a0, &a1, wait); +} + +void fnic_get_res_counts(struct fnic *fnic) +{ + fnic->wq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_WQ); + fnic->raw_wq_count = fnic->wq_count - 1; + fnic->wq_copy_count = fnic->wq_count - fnic->raw_wq_count; + fnic->rq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_RQ); + fnic->cq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_CQ); + fnic->intr_count = vnic_dev_get_res_count(fnic->vdev, + RES_TYPE_INTR_CTRL); +} + +void fnic_free_vnic_resources(struct fnic *fnic) +{ + unsigned int i; + + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_free(&fnic->wq[i]); + + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_free(&fnic->wq_copy[i]); + + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_free(&fnic->rq[i]); + + for (i = 0; i < fnic->cq_count; i++) + vnic_cq_free(&fnic->cq[i]); + + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_free(&fnic->intr[i]); +} + +int fnic_alloc_vnic_resources(struct fnic *fnic) +{ + enum vnic_dev_intr_mode intr_mode; + unsigned int mask_on_assertion; + unsigned int interrupt_offset; + unsigned int error_interrupt_enable; + unsigned int error_interrupt_offset; + unsigned int i, cq_index; + unsigned int wq_copy_cq_desc_count; + int err; + + intr_mode = vnic_dev_get_intr_mode(fnic->vdev); + + shost_printk(KERN_INFO, fnic->lport->host, "vNIC interrupt mode: %s\n", + intr_mode == VNIC_DEV_INTR_MODE_INTX ? "legacy PCI INTx" : + intr_mode == VNIC_DEV_INTR_MODE_MSI ? "MSI" : + intr_mode == VNIC_DEV_INTR_MODE_MSIX ? + "MSI-X" : "unknown"); + + shost_printk(KERN_INFO, fnic->lport->host, "vNIC resources avail: " + "wq %d cp_wq %d raw_wq %d rq %d cq %d intr %d\n", + fnic->wq_count, fnic->wq_copy_count, fnic->raw_wq_count, + fnic->rq_count, fnic->cq_count, fnic->intr_count); + + /* Allocate Raw WQ used for FCS frames */ + for (i = 0; i < fnic->raw_wq_count; i++) { + err = vnic_wq_alloc(fnic->vdev, &fnic->wq[i], i, + fnic->config.wq_enet_desc_count, + sizeof(struct wq_enet_desc)); + if (err) + goto err_out_cleanup; + } + + /* Allocate Copy WQs used for SCSI IOs */ + for (i = 0; i < fnic->wq_copy_count; i++) { + err = vnic_wq_copy_alloc(fnic->vdev, &fnic->wq_copy[i], + (fnic->raw_wq_count + i), + fnic->config.wq_copy_desc_count, + sizeof(struct fcpio_host_req)); + if (err) + goto err_out_cleanup; + } + + /* RQ for receiving FCS frames */ + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_alloc(fnic->vdev, &fnic->rq[i], i, + fnic->config.rq_desc_count, + sizeof(struct rq_enet_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each RQ */ + for (i = 0; i < fnic->rq_count; i++) { + cq_index = i; + err = vnic_cq_alloc(fnic->vdev, + &fnic->cq[cq_index], cq_index, + fnic->config.rq_desc_count, + sizeof(struct cq_enet_rq_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each WQ */ + for (i = 0; i < fnic->raw_wq_count; i++) { + cq_index = fnic->rq_count + i; + err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], cq_index, + fnic->config.wq_enet_desc_count, + sizeof(struct cq_enet_wq_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each COPY WQ */ + wq_copy_cq_desc_count = (fnic->config.wq_copy_desc_count * 3); + for (i = 0; i < fnic->wq_copy_count; i++) { + cq_index = fnic->raw_wq_count + fnic->rq_count + i; + err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], + cq_index, + wq_copy_cq_desc_count, + sizeof(struct fcpio_fw_req)); + if (err) + goto err_out_cleanup; + } + + for (i = 0; i < fnic->intr_count; i++) { + err = vnic_intr_alloc(fnic->vdev, &fnic->intr[i], i); + if (err) + goto err_out_cleanup; + } + + fnic->legacy_pba = vnic_dev_get_res(fnic->vdev, + RES_TYPE_INTR_PBA_LEGACY, 0); + + if (!fnic->legacy_pba && intr_mode == VNIC_DEV_INTR_MODE_INTX) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to hook legacy pba resource\n"); + err = -ENODEV; + goto err_out_cleanup; + } + + /* + * Init RQ/WQ resources. + * + * RQ[0 to n-1] point to CQ[0 to n-1] + * WQ[0 to m-1] point to CQ[n to n+m-1] + * WQ_COPY[0 to k-1] points to CQ[n+m to n+m+k-1] + * + * Note for copy wq we always initialize with cq_index = 0 + * + * Error interrupt is not enabled for MSI. + */ + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_INTX: + case VNIC_DEV_INTR_MODE_MSIX: + error_interrupt_enable = 1; + error_interrupt_offset = fnic->err_intr_offset; + break; + default: + error_interrupt_enable = 0; + error_interrupt_offset = 0; + break; + } + + for (i = 0; i < fnic->rq_count; i++) { + cq_index = i; + vnic_rq_init(&fnic->rq[i], + cq_index, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->raw_wq_count; i++) { + cq_index = i + fnic->rq_count; + vnic_wq_init(&fnic->wq[i], + cq_index, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->wq_copy_count; i++) { + vnic_wq_copy_init(&fnic->wq_copy[i], + 0 /* cq_index 0 - always */, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->cq_count; i++) { + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_MSIX: + interrupt_offset = i; + break; + default: + interrupt_offset = 0; + break; + } + + vnic_cq_init(&fnic->cq[i], + 0 /* flow_control_enable */, + 1 /* color_enable */, + 0 /* cq_head */, + 0 /* cq_tail */, + 1 /* cq_tail_color */, + 1 /* interrupt_enable */, + 1 /* cq_entry_enable */, + 0 /* cq_message_enable */, + interrupt_offset, + 0 /* cq_message_addr */); + } + + /* + * Init INTR resources + * + * mask_on_assertion is not used for INTx due to the level- + * triggered nature of INTx + */ + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_MSI: + case VNIC_DEV_INTR_MODE_MSIX: + mask_on_assertion = 1; + break; + default: + mask_on_assertion = 0; + break; + } + + for (i = 0; i < fnic->intr_count; i++) { + vnic_intr_init(&fnic->intr[i], + fnic->config.intr_timer, + fnic->config.intr_timer_type, + mask_on_assertion); + } + + /* init the stats memory by making the first call here */ + err = vnic_dev_stats_dump(fnic->vdev, &fnic->stats); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vnic_dev_stats_dump failed - x%x\n", err); + goto err_out_cleanup; + } + + /* Clear LIF stats */ + vnic_dev_stats_clear(fnic->vdev); + + return 0; + +err_out_cleanup: + fnic_free_vnic_resources(fnic); + + return err; +} diff --git a/drivers/scsi/fnic/fnic_res.h b/drivers/scsi/fnic/fnic_res.h new file mode 100644 index 000000000000..b6f310262534 --- /dev/null +++ b/drivers/scsi/fnic/fnic_res.h @@ -0,0 +1,197 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_RES_H_ +#define _FNIC_RES_H_ + +#include "wq_enet_desc.h" +#include "rq_enet_desc.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "fnic_io.h" +#include "fcpio.h" +#include "vnic_wq_copy.h" +#include "vnic_cq_copy.h" + +static inline void fnic_queue_wq_desc(struct vnic_wq *wq, + void *os_buf, dma_addr_t dma_addr, + unsigned int len, unsigned int fc_eof, + int vlan_tag_insert, + unsigned int vlan_tag, + int cq_entry, int sop, int eop) +{ + struct wq_enet_desc *desc = vnic_wq_next_desc(wq); + + wq_enet_desc_enc(desc, + (u64)dma_addr | VNIC_PADDR_TARGET, + (u16)len, + 0, /* mss_or_csum_offset */ + (u16)fc_eof, + 0, /* offload_mode */ + (u8)eop, (u8)cq_entry, + 1, /* fcoe_encap */ + (u8)vlan_tag_insert, + (u16)vlan_tag, + 0 /* loopback */); + + vnic_wq_post(wq, os_buf, dma_addr, len, sop, eop); +} + +static inline void fnic_queue_wq_copy_desc_icmnd_16(struct vnic_wq_copy *wq, + u32 req_id, + u32 lunmap_id, u8 spl_flags, + u32 sgl_cnt, u32 sense_len, + u64 sgl_addr, u64 sns_addr, + u8 crn, u8 pri_ta, + u8 flags, u8 *scsi_cdb, + u32 data_len, u8 *lun, + u32 d_id, u16 mss, + u32 ratov, u32 edtov) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_ICMND_16; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.icmnd_16.lunmap_id = lunmap_id; /* index into lunmap table */ + desc->u.icmnd_16.special_req_flags = spl_flags; /* exch req flags */ + desc->u.icmnd_16._resvd0[0] = 0; /* reserved */ + desc->u.icmnd_16._resvd0[1] = 0; /* reserved */ + desc->u.icmnd_16._resvd0[2] = 0; /* reserved */ + desc->u.icmnd_16.sgl_cnt = sgl_cnt; /* scatter-gather list count */ + desc->u.icmnd_16.sense_len = sense_len; /* sense buffer length */ + desc->u.icmnd_16.sgl_addr = sgl_addr; /* scatter-gather list addr */ + desc->u.icmnd_16.sense_addr = sns_addr; /* sense buffer address */ + desc->u.icmnd_16.crn = crn; /* SCSI Command Reference No.*/ + desc->u.icmnd_16.pri_ta = pri_ta; /* SCSI Pri & Task attribute */ + desc->u.icmnd_16._resvd1 = 0; /* reserved: should be 0 */ + desc->u.icmnd_16.flags = flags; /* command flags */ + memcpy(desc->u.icmnd_16.scsi_cdb, scsi_cdb, CDB_16); /* SCSI CDB */ + desc->u.icmnd_16.data_len = data_len; /* length of data expected */ + memcpy(desc->u.icmnd_16.lun, lun, LUN_ADDRESS); /* LUN address */ + desc->u.icmnd_16._resvd2 = 0; /* reserved */ + hton24(desc->u.icmnd_16.d_id, d_id); /* FC vNIC only: Target D_ID */ + desc->u.icmnd_16.mss = mss; /* FC vNIC only: max burst */ + desc->u.icmnd_16.r_a_tov = ratov; /*FC vNIC only: Res. Alloc Timeout */ + desc->u.icmnd_16.e_d_tov = edtov; /*FC vNIC only: Err Detect Timeout */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_itmf(struct vnic_wq_copy *wq, + u32 req_id, u32 lunmap_id, + u32 tm_req, u32 tm_id, u8 *lun, + u32 d_id, u32 r_a_tov, + u32 e_d_tov) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_ITMF; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.itmf.lunmap_id = lunmap_id; /* index into lunmap table */ + desc->u.itmf.tm_req = tm_req; /* SCSI Task Management request */ + desc->u.itmf.t_tag = tm_id; /* tag of fcpio to be aborted */ + desc->u.itmf._resvd = 0; + memcpy(desc->u.itmf.lun, lun, LUN_ADDRESS); /* LUN address */ + desc->u.itmf._resvd1 = 0; + hton24(desc->u.itmf.d_id, d_id); /* FC vNIC only: Target D_ID */ + desc->u.itmf.r_a_tov = r_a_tov; /* FC vNIC only: R_A_TOV in msec */ + desc->u.itmf.e_d_tov = e_d_tov; /* FC vNIC only: E_D_TOV in msec */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_flogi_reg(struct vnic_wq_copy *wq, + u32 req_id, u8 format, + u32 s_id, u8 *gw_mac) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_FLOGI_REG; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.flogi_reg.format = format; + hton24(desc->u.flogi_reg.s_id, s_id); + memcpy(desc->u.flogi_reg.gateway_mac, gw_mac, ETH_ALEN); + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_fw_reset(struct vnic_wq_copy *wq, + u32 req_id) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_RESET; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_lunmap(struct vnic_wq_copy *wq, + u32 req_id, u64 lunmap_addr, + u32 lunmap_len) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_LUNMAP_REQ; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.lunmap_req.addr = lunmap_addr; /* address of the buffer */ + desc->u.lunmap_req.len = lunmap_len; /* len of the buffer */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_rq_desc(struct vnic_rq *rq, + void *os_buf, dma_addr_t dma_addr, + u16 len) +{ + struct rq_enet_desc *desc = vnic_rq_next_desc(rq); + + rq_enet_desc_enc(desc, + (u64)dma_addr | VNIC_PADDR_TARGET, + RQ_ENET_TYPE_ONLY_SOP, + (u16)len); + + vnic_rq_post(rq, os_buf, 0, dma_addr, len); +} + + +struct fnic; + +int fnic_get_vnic_config(struct fnic *); +int fnic_alloc_vnic_resources(struct fnic *); +void fnic_free_vnic_resources(struct fnic *); +void fnic_get_res_counts(struct fnic *); +int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu, + u8 rss_hash_type, u8 rss_hash_bits, u8 rss_base_cpu, + u8 rss_enable, u8 tso_ipid_split_en, + u8 ig_vlan_strip_en); + +#endif /* _FNIC_RES_H_ */ diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c new file mode 100644 index 000000000000..eabf36502856 --- /dev/null +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -0,0 +1,1850 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic.h" + +const char *fnic_state_str[] = { + [FNIC_IN_FC_MODE] = "FNIC_IN_FC_MODE", + [FNIC_IN_FC_TRANS_ETH_MODE] = "FNIC_IN_FC_TRANS_ETH_MODE", + [FNIC_IN_ETH_MODE] = "FNIC_IN_ETH_MODE", + [FNIC_IN_ETH_TRANS_FC_MODE] = "FNIC_IN_ETH_TRANS_FC_MODE", +}; + +static const char *fnic_ioreq_state_str[] = { + [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING", + [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING", + [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE", + [FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE", +}; + +static const char *fcpio_status_str[] = { + [FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/ + [FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER", + [FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE", + [FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]", + [FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED", + [FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND", + [FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/ + [FCPIO_TIMEOUT] = "FCPIO_TIMEOUT", + [FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID", + [FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID", + [FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH", + [FCPIO_FW_ERR] = "FCPIO_FW_ERR", + [FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED", + [FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED", + [FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN", + [FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED", + [FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL", + [FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED", + [FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND", +}; + +const char *fnic_state_to_str(unsigned int state) +{ + if (state >= ARRAY_SIZE(fnic_state_str) || !fnic_state_str[state]) + return "unknown"; + + return fnic_state_str[state]; +} + +static const char *fnic_ioreq_state_to_str(unsigned int state) +{ + if (state >= ARRAY_SIZE(fnic_ioreq_state_str) || + !fnic_ioreq_state_str[state]) + return "unknown"; + + return fnic_ioreq_state_str[state]; +} + +static const char *fnic_fcpio_status_to_str(unsigned int status) +{ + if (status >= ARRAY_SIZE(fcpio_status_str) || !fcpio_status_str[status]) + return "unknown"; + + return fcpio_status_str[status]; +} + +static void fnic_cleanup_io(struct fnic *fnic, int exclude_id); + +static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic, + struct scsi_cmnd *sc) +{ + u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1); + + return &fnic->io_req_lock[hash]; +} + +/* + * Unmap the data buffer and sense buffer for an io_req, + * also unmap and free the device-private scatter/gather list. + */ +static void fnic_release_ioreq_buf(struct fnic *fnic, + struct fnic_io_req *io_req, + struct scsi_cmnd *sc) +{ + if (io_req->sgl_list_pa) + pci_unmap_single(fnic->pdev, io_req->sgl_list_pa, + sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt, + PCI_DMA_TODEVICE); + scsi_dma_unmap(sc); + + if (io_req->sgl_cnt) + mempool_free(io_req->sgl_list_alloc, + fnic->io_sgl_pool[io_req->sgl_type]); + if (io_req->sense_buf_pa) + pci_unmap_single(fnic->pdev, io_req->sense_buf_pa, + SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE); +} + +/* Free up Copy Wq descriptors. Called with copy_wq lock held */ +static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq) +{ + /* if no Ack received from firmware, then nothing to clean */ + if (!fnic->fw_ack_recd[0]) + return 1; + + /* + * Update desc_available count based on number of freed descriptors + * Account for wraparound + */ + if (wq->to_clean_index <= fnic->fw_ack_index[0]) + wq->ring.desc_avail += (fnic->fw_ack_index[0] + - wq->to_clean_index + 1); + else + wq->ring.desc_avail += (wq->ring.desc_count + - wq->to_clean_index + + fnic->fw_ack_index[0] + 1); + + /* + * just bump clean index to ack_index+1 accounting for wraparound + * this will essentially free up all descriptors between + * to_clean_index and fw_ack_index, both inclusive + */ + wq->to_clean_index = + (fnic->fw_ack_index[0] + 1) % wq->ring.desc_count; + + /* we have processed the acks received so far */ + fnic->fw_ack_recd[0] = 0; + return 0; +} + + +/* + * fnic_fw_reset_handler + * Routine to send reset msg to fw + */ +int fnic_fw_reset_handler(struct fnic *fnic) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) + ret = -EAGAIN; + else + fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + + if (!ret) + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Issued fw reset\n"); + else + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Failed to issue fw reset\n"); + return ret; +} + + +/* + * fnic_flogi_reg_handler + * Routine to send flogi register msg to fw + */ +int fnic_flogi_reg_handler(struct fnic *fnic) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + u8 gw_mac[ETH_ALEN]; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + ret = -EAGAIN; + goto flogi_reg_ioreq_end; + } + + if (fnic->fcoui_mode) + memset(gw_mac, 0xff, ETH_ALEN); + else + memcpy(gw_mac, fnic->dest_addr, ETH_ALEN); + + fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG, + FCPIO_FLOGI_REG_GW_DEST, + fnic->s_id, + gw_mac); + +flogi_reg_ioreq_end: + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + + if (!ret) + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "flog reg issued\n"); + + return ret; +} + +/* + * fnic_queue_wq_copy_desc + * Routine to enqueue a wq copy desc + */ +static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, + struct vnic_wq_copy *wq, + struct fnic_io_req *io_req, + struct scsi_cmnd *sc, + u32 sg_count) +{ + struct scatterlist *sg; + struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); + struct fc_rport_libfc_priv *rp = rport->dd_data; + struct host_sg_desc *desc; + u8 pri_tag = 0; + unsigned int i; + unsigned long intr_flags; + int flags; + u8 exch_flags; + struct scsi_lun fc_lun; + char msg[2]; + + if (sg_count) { + BUG_ON(sg_count < 0); + BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT); + + /* For each SGE, create a device desc entry */ + desc = io_req->sgl_list; + for_each_sg(scsi_sglist(sc), sg, sg_count, i) { + desc->addr = cpu_to_le64(sg_dma_address(sg)); + desc->len = cpu_to_le32(sg_dma_len(sg)); + desc->_resvd = 0; + desc++; + } + + io_req->sgl_list_pa = pci_map_single + (fnic->pdev, + io_req->sgl_list, + sizeof(io_req->sgl_list[0]) * sg_count, + PCI_DMA_TODEVICE); + } + + io_req->sense_buf_pa = pci_map_single(fnic->pdev, + sc->sense_buffer, + SCSI_SENSE_BUFFERSIZE, + PCI_DMA_FROMDEVICE); + + int_to_scsilun(sc->device->lun, &fc_lun); + + pri_tag = FCPIO_ICMND_PTA_SIMPLE; + msg[0] = MSG_SIMPLE_TAG; + scsi_populate_tag_msg(sc, msg); + if (msg[0] == MSG_ORDERED_TAG) + pri_tag = FCPIO_ICMND_PTA_ORDERED; + + /* Enqueue the descriptor in the Copy WQ */ + spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (unlikely(!vnic_wq_copy_desc_avail(wq))) { + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + return SCSI_MLQUEUE_HOST_BUSY; + } + + flags = 0; + if (sc->sc_data_direction == DMA_FROM_DEVICE) + flags = FCPIO_ICMND_RDDATA; + else if (sc->sc_data_direction == DMA_TO_DEVICE) + flags = FCPIO_ICMND_WRDATA; + + exch_flags = 0; + if ((fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) && + (rp->flags & FC_RP_FLAGS_RETRY)) + exch_flags |= FCPIO_ICMND_SRFLAG_RETRY; + + fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag, + 0, exch_flags, io_req->sgl_cnt, + SCSI_SENSE_BUFFERSIZE, + io_req->sgl_list_pa, + io_req->sense_buf_pa, + 0, /* scsi cmd ref, always 0 */ + pri_tag, /* scsi pri and tag */ + flags, /* command flags */ + sc->cmnd, scsi_bufflen(sc), + fc_lun.scsi_lun, io_req->port_id, + rport->maxframe_size, rp->r_a_tov, + rp->e_d_tov); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + return 0; +} + +/* + * fnic_queuecommand + * Routine to send a scsi cdb + * Called with host_lock held and interrupts disabled. + */ +int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) +{ + struct fc_lport *lp; + struct fc_rport *rport; + struct fnic_io_req *io_req; + struct fnic *fnic; + struct vnic_wq_copy *wq; + int ret; + u32 sg_count; + unsigned long flags; + unsigned long ptr; + + rport = starget_to_rport(scsi_target(sc->device)); + ret = fc_remote_port_chkready(rport); + if (ret) { + sc->result = ret; + done(sc); + return 0; + } + + lp = shost_priv(sc->device->host); + if (lp->state != LPORT_ST_READY || !(lp->link_up)) + return SCSI_MLQUEUE_HOST_BUSY; + + /* + * Release host lock, use driver resource specific locks from here. + * Don't re-enable interrupts in case they were disabled prior to the + * caller disabling them. + */ + spin_unlock(lp->host->host_lock); + + /* Get a new io_req for this SCSI IO */ + fnic = lport_priv(lp); + + io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); + if (!io_req) { + ret = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + memset(io_req, 0, sizeof(*io_req)); + + /* Map the data buffer */ + sg_count = scsi_dma_map(sc); + if (sg_count < 0) { + mempool_free(io_req, fnic->io_req_pool); + goto out; + } + + /* Determine the type of scatter/gather list we need */ + io_req->sgl_cnt = sg_count; + io_req->sgl_type = FNIC_SGL_CACHE_DFLT; + if (sg_count > FNIC_DFLT_SG_DESC_CNT) + io_req->sgl_type = FNIC_SGL_CACHE_MAX; + + if (sg_count) { + io_req->sgl_list = + mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type], + GFP_ATOMIC | GFP_DMA); + if (!io_req->sgl_list) { + ret = SCSI_MLQUEUE_HOST_BUSY; + scsi_dma_unmap(sc); + mempool_free(io_req, fnic->io_req_pool); + goto out; + } + + /* Cache sgl list allocated address before alignment */ + io_req->sgl_list_alloc = io_req->sgl_list; + ptr = (unsigned long) io_req->sgl_list; + if (ptr % FNIC_SG_DESC_ALIGN) { + io_req->sgl_list = (struct host_sg_desc *) + (((unsigned long) ptr + + FNIC_SG_DESC_ALIGN - 1) + & ~(FNIC_SG_DESC_ALIGN - 1)); + } + } + + /* initialize rest of io_req */ + io_req->port_id = rport->port_id; + CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; + CMD_SP(sc) = (char *)io_req; + sc->scsi_done = done; + + /* create copy wq desc and enqueue it */ + wq = &fnic->wq_copy[0]; + ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count); + if (ret) { + /* + * In case another thread cancelled the request, + * refetch the pointer under the lock. + */ + spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + CMD_SP(sc) = NULL; + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + spin_unlock_irqrestore(io_lock, flags); + if (io_req) { + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + } +out: + /* acquire host lock before returning to SCSI */ + spin_lock(lp->host->host_lock); + return ret; +} + +/* + * fnic_fcpio_fw_reset_cmpl_handler + * Routine to handle fw reset completion + */ +static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + int ret = 0; + struct fc_frame *flogi; + unsigned long flags; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + + /* Clean up all outstanding io requests */ + fnic_cleanup_io(fnic, SCSI_NO_TAG); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + flogi = fnic->flogi; + fnic->flogi = NULL; + + /* fnic should be in FC_TRANS_ETH_MODE */ + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) { + /* Check status of reset completion */ + if (!hdr_status) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "reset cmpl success\n"); + /* Ready to send flogi out */ + fnic->state = FNIC_IN_ETH_MODE; + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic fw_reset : failed %s\n", + fnic_fcpio_status_to_str(hdr_status)); + + /* + * Unable to change to eth mode, cannot send out flogi + * Change state to fc mode, so that subsequent Flogi + * requests from libFC will cause more attempts to + * reset the firmware. Free the cached flogi + */ + fnic->state = FNIC_IN_FC_MODE; + ret = -1; + } + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Unexpected state %s while processing" + " reset cmpl\n", fnic_state_to_str(fnic->state)); + ret = -1; + } + + /* Thread removing device blocks till firmware reset is complete */ + if (fnic->remove_wait) + complete(fnic->remove_wait); + + /* + * If fnic is being removed, or fw reset failed + * free the flogi frame. Else, send it out + */ + if (fnic->remove_wait || ret) { + fnic->flogi_oxid = FC_XID_UNKNOWN; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (flogi) + dev_kfree_skb_irq(fp_skb(flogi)); + goto reset_cmpl_handler_end; + } + + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (flogi) + ret = fnic_send_frame(fnic, flogi); + + reset_cmpl_handler_end: + return ret; +} + +/* + * fnic_fcpio_flogi_reg_cmpl_handler + * Routine to handle flogi register completion + */ +static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + int ret = 0; + struct fc_frame *flogi_resp = NULL; + unsigned long flags; + struct sk_buff *skb; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + + /* Update fnic state based on status of flogi reg completion */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + + flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + + if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) { + + /* Check flogi registration completion status */ + if (!hdr_status) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "flog reg succeeded\n"); + fnic->state = FNIC_IN_FC_MODE; + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic flogi reg :failed %s\n", + fnic_fcpio_status_to_str(hdr_status)); + fnic->state = FNIC_IN_ETH_MODE; + ret = -1; + } + } else { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Unexpected fnic state %s while" + " processing flogi reg completion\n", + fnic_state_to_str(fnic->state)); + ret = -1; + } + + /* Successful flogi reg cmpl, pass frame to LibFC */ + if (!ret && flogi_resp) { + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + goto reg_cmpl_handler_end; + } + skb = (struct sk_buff *)flogi_resp; + /* Use fr_flags to indicate whether flogi resp or not */ + fr_flags(flogi_resp) = 1; + fr_dev(flogi_resp) = fnic->lport; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + skb_queue_tail(&fnic->frame_queue, skb); + queue_work(fnic_event_queue, &fnic->frame_work); + + } else { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (flogi_resp) + dev_kfree_skb_irq(fp_skb(flogi_resp)); + } + +reg_cmpl_handler_end: + return ret; +} + +static inline int is_ack_index_in_range(struct vnic_wq_copy *wq, + u16 request_out) +{ + if (wq->to_clean_index <= wq->to_use_index) { + /* out of range, stale request_out index */ + if (request_out < wq->to_clean_index || + request_out >= wq->to_use_index) + return 0; + } else { + /* out of range, stale request_out index */ + if (request_out < wq->to_clean_index && + request_out >= wq->to_use_index) + return 0; + } + /* request_out index is in range */ + return 1; +} + + +/* + * Mark that ack received and store the Ack index. If there are multiple + * acks received before Tx thread cleans it up, the latest value will be + * used which is correct behavior. This state should be in the copy Wq + * instead of in the fnic + */ +static inline void fnic_fcpio_ack_handler(struct fnic *fnic, + unsigned int cq_index, + struct fcpio_fw_req *desc) +{ + struct vnic_wq_copy *wq; + u16 request_out = desc->u.ack.request_out; + unsigned long flags; + + /* mark the ack state */ + wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count]; + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (is_ack_index_in_range(wq, request_out)) { + fnic->fw_ack_index[0] = request_out; + fnic->fw_ack_recd[0] = 1; + } + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); +} + +/* + * fnic_fcpio_icmnd_cmpl_handler + * Routine to handle icmnd completions + */ +static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + u32 id; + u64 xfer_len = 0; + struct fcpio_icmnd_cmpl *icmnd_cmpl; + struct fnic_io_req *io_req; + struct scsi_cmnd *sc; + unsigned long flags; + spinlock_t *io_lock; + + /* Decode the cmpl description to get the io_req id */ + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + fcpio_tag_id_dec(&tag, &id); + + if (id >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id); + WARN_ON_ONCE(!sc); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + WARN_ON_ONCE(!io_req); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + /* firmware completed the io */ + io_req->io_completed = 1; + + /* + * if SCSI-ML has already issued abort on this command, + * ignore completion of the IO. The abts path will clean it up + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + /* Mark the IO as complete */ + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + + icmnd_cmpl = &desc->u.icmnd_cmpl; + + switch (hdr_status) { + case FCPIO_SUCCESS: + sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status; + xfer_len = scsi_bufflen(sc); + scsi_set_resid(sc, icmnd_cmpl->residual); + + if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER) + xfer_len -= icmnd_cmpl->residual; + + /* + * If queue_full, then try to reduce queue depth for all + * LUNS on the target. Todo: this should be accompanied + * by a periodic queue_depth rampup based on successful + * IO completion. + */ + if (icmnd_cmpl->scsi_status == QUEUE_FULL) { + struct scsi_device *t_sdev; + int qd = 0; + + shost_for_each_device(t_sdev, sc->device->host) { + if (t_sdev->id != sc->device->id) + continue; + + if (t_sdev->queue_depth > 1) { + qd = scsi_track_queue_full + (t_sdev, + t_sdev->queue_depth - 1); + if (qd == -1) + qd = t_sdev->host->cmd_per_lun; + shost_printk(KERN_INFO, + fnic->lport->host, + "scsi[%d:%d:%d:%d" + "] queue full detected," + "new depth = %d\n", + t_sdev->host->host_no, + t_sdev->channel, + t_sdev->id, t_sdev->lun, + t_sdev->queue_depth); + } + } + } + break; + + case FCPIO_TIMEOUT: /* request was timed out */ + sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_ABORTED: /* request was aborted */ + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */ + scsi_set_resid(sc, icmnd_cmpl->residual); + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_OUT_OF_RESOURCE: /* out of resources to complete request */ + sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status; + break; + case FCPIO_INVALID_HEADER: /* header contains invalid data */ + case FCPIO_INVALID_PARAM: /* some parameter in request invalid */ + case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */ + case FCPIO_IO_NOT_FOUND: /* requested I/O was not found */ + case FCPIO_SGL_INVALID: /* request was aborted due to sgl error */ + case FCPIO_MSS_INVALID: /* request was aborted due to mss error */ + case FCPIO_FW_ERR: /* request was terminated due fw error */ + default: + shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n", + fnic_fcpio_status_to_str(hdr_status)); + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + } + + /* Break link with the SCSI command */ + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + + mempool_free(io_req, fnic->io_req_pool); + + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + fnic->lport->host_stats.fcp_input_requests++; + fnic->fcp_input_bytes += xfer_len; + } else if (sc->sc_data_direction == DMA_TO_DEVICE) { + fnic->lport->host_stats.fcp_output_requests++; + fnic->fcp_output_bytes += xfer_len; + } else + fnic->lport->host_stats.fcp_control_requests++; + + /* Call SCSI completion function to complete the IO */ + if (sc->scsi_done) + sc->scsi_done(sc); + +} + +/* fnic_fcpio_itmf_cmpl_handler + * Routine to handle itmf completions + */ +static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + u32 id; + struct scsi_cmnd *sc; + struct fnic_io_req *io_req; + unsigned long flags; + spinlock_t *io_lock; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + fcpio_tag_id_dec(&tag, &id); + + if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK); + WARN_ON_ONCE(!sc); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + WARN_ON_ONCE(!io_req); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + if (id & FNIC_TAG_ABORT) { + /* Completion of abort cmd */ + if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) { + /* This is a late completion. Ignore it */ + spin_unlock_irqrestore(io_lock, flags); + return; + } + CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; + CMD_ABTS_STATUS(sc) = hdr_status; + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "abts cmpl recd. id %d status %s\n", + (int)(id & FNIC_TAG_MASK), + fnic_fcpio_status_to_str(hdr_status)); + + /* + * If scsi_eh thread is blocked waiting for abts to complete, + * signal completion to it. IO will be cleaned in the thread + * else clean it in this context + */ + if (io_req->abts_done) { + complete(io_req->abts_done); + spin_unlock_irqrestore(io_lock, flags); + } else { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "abts cmpl, completing IO\n"); + CMD_SP(sc) = NULL; + sc->result = (DID_ERROR << 16); + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + if (sc->scsi_done) + sc->scsi_done(sc); + } + + } else if (id & FNIC_TAG_DEV_RST) { + /* Completion of device reset */ + CMD_LR_STATUS(sc) = hdr_status; + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "dev reset cmpl recd. id %d status %s\n", + (int)(id & FNIC_TAG_MASK), + fnic_fcpio_status_to_str(hdr_status)); + if (io_req->dr_done) + complete(io_req->dr_done); + spin_unlock_irqrestore(io_lock, flags); + + } else { + shost_printk(KERN_ERR, fnic->lport->host, + "Unexpected itmf io state %s tag %x\n", + fnic_ioreq_state_to_str(CMD_STATE(sc)), id); + spin_unlock_irqrestore(io_lock, flags); + } + +} + +/* + * fnic_fcpio_cmpl_handler + * Routine to service the cq for wq_copy + */ +static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev, + unsigned int cq_index, + struct fcpio_fw_req *desc) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + int ret = 0; + + switch (desc->hdr.type) { + case FCPIO_ACK: /* fw copied copy wq desc to its queue */ + fnic_fcpio_ack_handler(fnic, cq_index, desc); + break; + + case FCPIO_ICMND_CMPL: /* fw completed a command */ + fnic_fcpio_icmnd_cmpl_handler(fnic, desc); + break; + + case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/ + fnic_fcpio_itmf_cmpl_handler(fnic, desc); + break; + + case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */ + ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc); + break; + + case FCPIO_RESET_CMPL: /* fw completed reset */ + ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc); + break; + + default: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "firmware completion type %d\n", + desc->hdr.type); + break; + } + + return ret; +} + +/* + * fnic_wq_copy_cmpl_handler + * Routine to process wq copy + */ +int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do) +{ + unsigned int wq_work_done = 0; + unsigned int i, cq_index; + unsigned int cur_work_done; + + for (i = 0; i < fnic->wq_copy_count; i++) { + cq_index = i + fnic->raw_wq_count + fnic->rq_count; + cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index], + fnic_fcpio_cmpl_handler, + copy_work_to_do); + wq_work_done += cur_work_done; + } + return wq_work_done; +} + +static void fnic_cleanup_io(struct fnic *fnic, int exclude_id) +{ + unsigned int i; + struct fnic_io_req *io_req; + unsigned long flags = 0; + struct scsi_cmnd *sc; + spinlock_t *io_lock; + + for (i = 0; i < FNIC_MAX_IO_REQ; i++) { + if (i == exclude_id) + continue; + + sc = scsi_host_find_tag(fnic->lport->host, i); + if (!sc) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto cleanup_scsi_cmd; + } + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + /* + * If there is a scsi_cmnd associated with this io_req, then + * free the corresponding state + */ + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +cleanup_scsi_cmd: + sc->result = DID_TRANSPORT_DISRUPTED << 16; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_cleanup_io:" + " DID_TRANSPORT_DISRUPTED\n"); + + /* Complete the command to SCSI */ + if (sc->scsi_done) + sc->scsi_done(sc); + } +} + +void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, + struct fcpio_host_req *desc) +{ + u32 id; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + struct fnic_io_req *io_req; + struct scsi_cmnd *sc; + unsigned long flags; + spinlock_t *io_lock; + + /* get the tag reference */ + fcpio_tag_id_dec(&desc->hdr.tag, &id); + id &= FNIC_TAG_MASK; + + if (id >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + /* Get the IO context which this desc refers to */ + io_req = (struct fnic_io_req *)CMD_SP(sc); + + /* fnic interrupts are turned off by now */ + + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto wq_copy_cleanup_scsi_cmd; + } + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +wq_copy_cleanup_scsi_cmd: + sc->result = DID_NO_CONNECT << 16; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:" + " DID_NO_CONNECT\n"); + + if (sc->scsi_done) + sc->scsi_done(sc); +} + +static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag, + u32 task_req, u8 *fc_lun, + struct fnic_io_req *io_req) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + return 1; + } + fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT, + 0, task_req, tag, fc_lun, io_req->port_id, + fnic->config.ra_tov, fnic->config.ed_tov); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + return 0; +} + +void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + struct scsi_cmnd *sc; + struct scsi_lun fc_lun; + enum fnic_ioreq_state old_ioreq_state; + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic_rport_reset_exch called portid 0x%06x\n", + port_id); + + if (fnic->in_remove) + return; + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + if (!sc) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || io_req->port_id != port_id) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to rport that went away + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + old_ioreq_state = CMD_STATE(sc); + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + BUG_ON(io_req->abts_done); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_rport_reset_exch: Issuing abts\n"); + + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + /* + * Revert the cmd state back to old state, if + * it hasnt changed in between. This cmd will get + * aborted later by scsi_eh, or cleaned up during + * lun reset + */ + io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) + CMD_STATE(sc) = old_ioreq_state; + spin_unlock_irqrestore(io_lock, flags); + } + } + +} + +void fnic_terminate_rport_io(struct fc_rport *rport) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + struct scsi_cmnd *sc; + struct scsi_lun fc_lun; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fnic *fnic = lport_priv(lport); + struct fc_rport *cmd_rport; + enum fnic_ioreq_state old_ioreq_state; + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, "fnic_terminate_rport_io called" + " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n", + rport->port_name, rport->node_name, + rport->port_id); + + if (fnic->in_remove) + return; + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + if (!sc) + continue; + + cmd_rport = starget_to_rport(scsi_target(sc->device)); + if (rport != cmd_rport) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || rport != cmd_rport) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to rport that went away + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + old_ioreq_state = CMD_STATE(sc); + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + BUG_ON(io_req->abts_done); + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic_terminate_rport_io: Issuing abts\n"); + + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + /* + * Revert the cmd state back to old state, if + * it hasnt changed in between. This cmd will get + * aborted later by scsi_eh, or cleaned up during + * lun reset + */ + io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) + CMD_STATE(sc) = old_ioreq_state; + spin_unlock_irqrestore(io_lock, flags); + } + } + +} + +static void fnic_block_error_handler(struct scsi_cmnd *sc) +{ + struct Scsi_Host *shost = sc->device->host; + struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + while (rport->port_state == FC_PORTSTATE_BLOCKED) { + spin_unlock_irqrestore(shost->host_lock, flags); + msleep(1000); + spin_lock_irqsave(shost->host_lock, flags); + } + spin_unlock_irqrestore(shost->host_lock, flags); + +} + +/* + * This function is exported to SCSI for sending abort cmnds. + * A SCSI IO is represented by a io_req in the driver. + * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO. + */ +int fnic_abort_cmd(struct scsi_cmnd *sc) +{ + struct fc_lport *lp; + struct fnic *fnic; + struct fnic_io_req *io_req; + struct fc_rport *rport; + spinlock_t *io_lock; + unsigned long flags; + int ret = SUCCESS; + u32 task_req; + struct scsi_lun fc_lun; + DECLARE_COMPLETION_ONSTACK(tm_done); + + /* Wait for rport to unblock */ + fnic_block_error_handler(sc); + + /* Get local-port, check ready and link up */ + lp = shost_priv(sc->device->host); + + fnic = lport_priv(lp); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n", + (starget_to_rport(scsi_target(sc->device)))->port_id, + sc->device->lun, sc->request->tag); + + if (lp->state != LPORT_ST_READY || !(lp->link_up)) { + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * Avoid a race between SCSI issuing the abort and the device + * completing the command. + * + * If the command is already completed by the fw cmpl code, + * we just return SUCCESS from here. This means that the abort + * succeeded. In the SCSI ML, since the timeout for command has + * happened, the completion wont actually complete the command + * and it will be considered as an aborted command + * + * The CMD_SP will not be cleared except while holding io_req_lock. + */ + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_abort_cmd_end; + } + + io_req->abts_done = &tm_done; + + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + goto wait_pending; + } + /* + * Command is still pending, need to abort it + * If the firmware completes the command after this point, + * the completion wont be done till mid-layer, since abort + * has already started. + */ + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + spin_unlock_irqrestore(io_lock, flags); + + /* + * Check readiness of the remote port. If the path to remote + * port is up, then send abts to the remote port to terminate + * the IO. Else, just locally terminate the IO in the firmware + */ + rport = starget_to_rport(scsi_target(sc->device)); + if (fc_remote_port_chkready(rport) == 0) + task_req = FCPIO_ITMF_ABT_TASK; + else + task_req = FCPIO_ITMF_ABT_TASK_TERM; + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req, + fc_lun.scsi_lun, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->abts_done = NULL; + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * We queued an abort IO, wait for its completion. + * Once the firmware completes the abort command, it will + * wake up this thread. + */ + wait_pending: + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies + (2 * fnic->config.ra_tov + + fnic->config.ed_tov)); + + /* Check the abort status */ + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + io_req->abts_done = NULL; + + /* fw did not complete abort, timed out */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * firmware completed the abort, check the status, + * free the io_req irrespective of failure or success + */ + if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS) + ret = FAILED; + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +fnic_abort_cmd_end: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from abort cmd %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + return ret; +} + +static inline int fnic_queue_dr_io_req(struct fnic *fnic, + struct scsi_cmnd *sc, + struct fnic_io_req *io_req) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + struct scsi_lun fc_lun; + int ret = 0; + unsigned long intr_flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + ret = -EAGAIN; + goto lr_io_req_end; + } + + /* fill in the lun info */ + int_to_scsilun(sc->device->lun, &fc_lun); + + fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST, + 0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG, + fc_lun.scsi_lun, io_req->port_id, + fnic->config.ra_tov, fnic->config.ed_tov); + +lr_io_req_end: + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + + return ret; +} + +/* + * Clean up any pending aborts on the lun + * For each outstanding IO on this lun, whose abort is not completed by fw, + * issue a local abort. Wait for abort to complete. Return 0 if all commands + * successfully aborted, 1 otherwise + */ +static int fnic_clean_pending_aborts(struct fnic *fnic, + struct scsi_cmnd *lr_sc) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + int ret = 0; + struct scsi_cmnd *sc; + struct fc_rport *rport; + struct scsi_lun fc_lun; + struct scsi_device *lun_dev = lr_sc->device; + DECLARE_COMPLETION_ONSTACK(tm_done); + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + /* + * ignore this lun reset cmd or cmds that do not belong to + * this lun + */ + if (!sc || sc == lr_sc || sc->device != lun_dev) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || sc->device != lun_dev) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to the LUN that we are resetting + */ + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Found IO in %s on lun\n", + fnic_ioreq_state_to_str(CMD_STATE(sc))); + + BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING); + + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + io_req->abts_done = &tm_done; + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + rport = starget_to_rport(scsi_target(sc->device)); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->abts_done = NULL; + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies + (fnic->config.ed_tov)); + + /* Recheck cmd state to check if it is now aborted */ + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + + io_req->abts_done = NULL; + + /* if abort is still pending with fw, fail */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + CMD_SP(sc) = NULL; + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + +clean_pending_aborts_end: + return ret; +} + +/* + * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN + * fail to get aborted. It calls driver's eh_device_reset with a SCSI command + * on the LUN. + */ +int fnic_device_reset(struct scsi_cmnd *sc) +{ + struct fc_lport *lp; + struct fnic *fnic; + struct fnic_io_req *io_req; + struct fc_rport *rport; + int status; + int ret = FAILED; + spinlock_t *io_lock; + unsigned long flags; + DECLARE_COMPLETION_ONSTACK(tm_done); + + /* Wait for rport to unblock */ + fnic_block_error_handler(sc); + + /* Get local-port, check ready and link up */ + lp = shost_priv(sc->device->host); + + fnic = lport_priv(lp); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Device reset called FCID 0x%x, LUN 0x%x\n", + (starget_to_rport(scsi_target(sc->device)))->port_id, + sc->device->lun); + + + if (lp->state != LPORT_ST_READY || !(lp->link_up)) + goto fnic_device_reset_end; + + /* Check if remote port up */ + rport = starget_to_rport(scsi_target(sc->device)); + if (fc_remote_port_chkready(rport)) + goto fnic_device_reset_end; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + + /* + * If there is a io_req attached to this command, then use it, + * else allocate a new one. + */ + if (!io_req) { + io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_device_reset_end; + } + memset(io_req, 0, sizeof(*io_req)); + io_req->port_id = rport->port_id; + CMD_SP(sc) = (char *)io_req; + } + io_req->dr_done = &tm_done; + CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; + CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE; + spin_unlock_irqrestore(io_lock, flags); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n", + sc->request->tag); + + /* + * issue the device reset, if enqueue failed, clean up the ioreq + * and break assoc with scsi cmd + */ + if (fnic_queue_dr_io_req(fnic, sc, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->dr_done = NULL; + goto fnic_device_reset_clean; + } + + /* + * Wait on the local completion for LUN reset. The io_req may be + * freed while we wait since we hold no lock. + */ + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT)); + + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_device_reset_end; + } + io_req->dr_done = NULL; + + status = CMD_LR_STATUS(sc); + spin_unlock_irqrestore(io_lock, flags); + + /* + * If lun reset not completed, bail out with failed. io_req + * gets cleaned up during higher levels of EH + */ + if (status == FCPIO_INVALID_CODE) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Device reset timed out\n"); + goto fnic_device_reset_end; + } + + /* Completed, but not successful, clean up the io_req, return fail */ + if (status != FCPIO_SUCCESS) { + spin_lock_irqsave(io_lock, flags); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Device reset completed - failed\n"); + io_req = (struct fnic_io_req *)CMD_SP(sc); + goto fnic_device_reset_clean; + } + + /* + * Clean up any aborts on this lun that have still not + * completed. If any of these fail, then LUN reset fails. + * clean_pending_aborts cleans all cmds on this lun except + * the lun reset cmd. If all cmds get cleaned, the lun reset + * succeeds + */ + if (fnic_clean_pending_aborts(fnic, sc)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Device reset failed" + " since could not abort all IOs\n"); + goto fnic_device_reset_clean; + } + + /* Clean lun reset command */ + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + /* Completed, and successful */ + ret = SUCCESS; + +fnic_device_reset_clean: + if (io_req) + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + if (io_req) { + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + +fnic_device_reset_end: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from device reset %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + return ret; +} + +/* Clean up all IOs, clean up libFC local port */ +int fnic_reset(struct Scsi_Host *shost) +{ + struct fc_lport *lp; + struct fnic *fnic; + int ret = SUCCESS; + + lp = shost_priv(shost); + fnic = lport_priv(lp); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_reset called\n"); + + /* + * Reset local port, this will clean up libFC exchanges, + * reset remote port sessions, and if link is up, begin flogi + */ + if (lp->tt.lport_reset(lp)) + ret = FAILED; + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from fnic reset %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + + return ret; +} + +/* + * SCSI Error handling calls driver's eh_host_reset if all prior + * error handling levels return FAILED. If host reset completes + * successfully, and if link is up, then Fabric login begins. + * + * Host Reset is the highest level of error recovery. If this fails, then + * host is offlined by SCSI. + * + */ +int fnic_host_reset(struct scsi_cmnd *sc) +{ + int ret; + unsigned long wait_host_tmo; + struct Scsi_Host *shost = sc->device->host; + struct fc_lport *lp = shost_priv(shost); + + /* + * If fnic_reset is successful, wait for fabric login to complete + * scsi-ml tries to send a TUR to every device if host reset is + * successful, so before returning to scsi, fabric should be up + */ + ret = fnic_reset(shost); + if (ret == SUCCESS) { + wait_host_tmo = jiffies + FNIC_HOST_RESET_SETTLE_TIME * HZ; + ret = FAILED; + while (time_before(jiffies, wait_host_tmo)) { + if ((lp->state == LPORT_ST_READY) && + (lp->link_up)) { + ret = SUCCESS; + break; + } + ssleep(1); + } + } + + return ret; +} + +/* + * This fxn is called from libFC when host is removed + */ +void fnic_scsi_abort_io(struct fc_lport *lp) +{ + int err = 0; + unsigned long flags; + enum fnic_state old_state; + struct fnic *fnic = lport_priv(lp); + DECLARE_COMPLETION_ONSTACK(remove_wait); + + /* Issue firmware reset for fnic, wait for reset to complete */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->remove_wait = &remove_wait; + old_state = fnic->state; + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + err = fnic_fw_reset_handler(fnic); + if (err) { + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) + fnic->state = old_state; + fnic->remove_wait = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + + /* Wait for firmware reset to complete */ + wait_for_completion_timeout(&remove_wait, + msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT)); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->remove_wait = NULL; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_scsi_abort_io %s\n", + (fnic->state == FNIC_IN_ETH_MODE) ? + "SUCCESS" : "FAILED"); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + +} + +/* + * This fxn called from libFC to clean up driver IO state on link down + */ +void fnic_scsi_cleanup(struct fc_lport *lp) +{ + unsigned long flags; + enum fnic_state old_state; + struct fnic *fnic = lport_priv(lp); + + /* issue fw reset */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + old_state = fnic->state; + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (fnic_fw_reset_handler(fnic)) { + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) + fnic->state = old_state; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + } + +} + +void fnic_empty_scsi_cleanup(struct fc_lport *lp) +{ +} + +void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) +{ + struct fnic *fnic = lport_priv(lp); + + /* Non-zero sid, nothing to do */ + if (sid) + goto call_fc_exch_mgr_reset; + + if (did) { + fnic_rport_exch_reset(fnic, did); + goto call_fc_exch_mgr_reset; + } + + /* + * sid = 0, did = 0 + * link down or device being removed + */ + if (!fnic->in_remove) + fnic_scsi_cleanup(lp); + else + fnic_scsi_abort_io(lp); + + /* call libFC exch mgr reset to reset its exchanges */ +call_fc_exch_mgr_reset: + fc_exch_mgr_reset(lp, sid, did); + +} diff --git a/drivers/scsi/fnic/rq_enet_desc.h b/drivers/scsi/fnic/rq_enet_desc.h new file mode 100644 index 000000000000..92e80ae6b725 --- /dev/null +++ b/drivers/scsi/fnic/rq_enet_desc.h @@ -0,0 +1,58 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _RQ_ENET_DESC_H_ +#define _RQ_ENET_DESC_H_ + +/* Ethernet receive queue descriptor: 16B */ +struct rq_enet_desc { + __le64 address; + __le16 length_type; + u8 reserved[6]; +}; + +enum rq_enet_type_types { + RQ_ENET_TYPE_ONLY_SOP = 0, + RQ_ENET_TYPE_NOT_SOP = 1, + RQ_ENET_TYPE_RESV2 = 2, + RQ_ENET_TYPE_RESV3 = 3, +}; + +#define RQ_ENET_ADDR_BITS 64 +#define RQ_ENET_LEN_BITS 14 +#define RQ_ENET_LEN_MASK ((1 << RQ_ENET_LEN_BITS) - 1) +#define RQ_ENET_TYPE_BITS 2 +#define RQ_ENET_TYPE_MASK ((1 << RQ_ENET_TYPE_BITS) - 1) + +static inline void rq_enet_desc_enc(struct rq_enet_desc *desc, + u64 address, u8 type, u16 length) +{ + desc->address = cpu_to_le64(address); + desc->length_type = cpu_to_le16((length & RQ_ENET_LEN_MASK) | + ((type & RQ_ENET_TYPE_MASK) << RQ_ENET_LEN_BITS)); +} + +static inline void rq_enet_desc_dec(struct rq_enet_desc *desc, + u64 *address, u8 *type, u16 *length) +{ + *address = le64_to_cpu(desc->address); + *length = le16_to_cpu(desc->length_type) & RQ_ENET_LEN_MASK; + *type = (u8)((le16_to_cpu(desc->length_type) >> RQ_ENET_LEN_BITS) & + RQ_ENET_TYPE_MASK); +} + +#endif /* _RQ_ENET_DESC_H_ */ diff --git a/drivers/scsi/fnic/vnic_cq.c b/drivers/scsi/fnic/vnic_cq.c new file mode 100644 index 000000000000..c5db32eda5ef --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq.c @@ -0,0 +1,85 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +void vnic_cq_free(struct vnic_cq *cq) +{ + vnic_dev_free_desc_ring(cq->vdev, &cq->ring); + + cq->ctrl = NULL; +} + +int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + cq->index = index; + cq->vdev = vdev; + + cq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_CQ, index); + if (!cq->ctrl) { + printk(KERN_ERR "Failed to hook CQ[%d] resource\n", index); + return -EINVAL; + } + + err = vnic_dev_alloc_desc_ring(vdev, &cq->ring, desc_count, desc_size); + if (err) + return err; + + return 0; +} + +void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable, + unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail, + unsigned int cq_tail_color, unsigned int interrupt_enable, + unsigned int cq_entry_enable, unsigned int cq_message_enable, + unsigned int interrupt_offset, u64 cq_message_addr) +{ + u64 paddr; + + paddr = (u64)cq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &cq->ctrl->ring_base); + iowrite32(cq->ring.desc_count, &cq->ctrl->ring_size); + iowrite32(flow_control_enable, &cq->ctrl->flow_control_enable); + iowrite32(color_enable, &cq->ctrl->color_enable); + iowrite32(cq_head, &cq->ctrl->cq_head); + iowrite32(cq_tail, &cq->ctrl->cq_tail); + iowrite32(cq_tail_color, &cq->ctrl->cq_tail_color); + iowrite32(interrupt_enable, &cq->ctrl->interrupt_enable); + iowrite32(cq_entry_enable, &cq->ctrl->cq_entry_enable); + iowrite32(cq_message_enable, &cq->ctrl->cq_message_enable); + iowrite32(interrupt_offset, &cq->ctrl->interrupt_offset); + writeq(cq_message_addr, &cq->ctrl->cq_message_addr); +} + +void vnic_cq_clean(struct vnic_cq *cq) +{ + cq->to_clean = 0; + cq->last_color = 0; + + iowrite32(0, &cq->ctrl->cq_head); + iowrite32(0, &cq->ctrl->cq_tail); + iowrite32(1, &cq->ctrl->cq_tail_color); + + vnic_dev_clear_desc_ring(&cq->ring); +} diff --git a/drivers/scsi/fnic/vnic_cq.h b/drivers/scsi/fnic/vnic_cq.h new file mode 100644 index 000000000000..4ede6809fb1e --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq.h @@ -0,0 +1,121 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_CQ_H_ +#define _VNIC_CQ_H_ + +#include "cq_desc.h" +#include "vnic_dev.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_cq_service fnic_cq_service +#define vnic_cq_free fnic_cq_free +#define vnic_cq_alloc fnic_cq_alloc +#define vnic_cq_init fnic_cq_init +#define vnic_cq_clean fnic_cq_clean + +/* Completion queue control */ +struct vnic_cq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 flow_control_enable; /* 0x10 */ + u32 pad1; + u32 color_enable; /* 0x18 */ + u32 pad2; + u32 cq_head; /* 0x20 */ + u32 pad3; + u32 cq_tail; /* 0x28 */ + u32 pad4; + u32 cq_tail_color; /* 0x30 */ + u32 pad5; + u32 interrupt_enable; /* 0x38 */ + u32 pad6; + u32 cq_entry_enable; /* 0x40 */ + u32 pad7; + u32 cq_message_enable; /* 0x48 */ + u32 pad8; + u32 interrupt_offset; /* 0x50 */ + u32 pad9; + u64 cq_message_addr; /* 0x58 */ + u32 pad10; +}; + +struct vnic_cq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_cq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + unsigned int to_clean; + unsigned int last_color; +}; + +static inline unsigned int vnic_cq_service(struct vnic_cq *cq, + unsigned int work_to_do, + int (*q_service)(struct vnic_dev *vdev, struct cq_desc *cq_desc, + u8 type, u16 q_number, u16 completed_index, void *opaque), + void *opaque) +{ + struct cq_desc *cq_desc; + unsigned int work_done = 0; + u16 q_number, completed_index; + u8 type, color; + + cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + cq_desc_dec(cq_desc, &type, &color, + &q_number, &completed_index); + + while (color != cq->last_color) { + + if ((*q_service)(cq->vdev, cq_desc, type, + q_number, completed_index, opaque)) + break; + + cq->to_clean++; + if (cq->to_clean == cq->ring.desc_count) { + cq->to_clean = 0; + cq->last_color = cq->last_color ? 0 : 1; + } + + cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + cq_desc_dec(cq_desc, &type, &color, + &q_number, &completed_index); + + work_done++; + if (work_done >= work_to_do) + break; + } + + return work_done; +} + +void vnic_cq_free(struct vnic_cq *cq); +int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable, + unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail, + unsigned int cq_tail_color, unsigned int interrupt_enable, + unsigned int cq_entry_enable, unsigned int message_enable, + unsigned int interrupt_offset, u64 message_addr); +void vnic_cq_clean(struct vnic_cq *cq); + +#endif /* _VNIC_CQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_cq_copy.h b/drivers/scsi/fnic/vnic_cq_copy.h new file mode 100644 index 000000000000..7901ce255a81 --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq_copy.h @@ -0,0 +1,62 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_CQ_COPY_H_ +#define _VNIC_CQ_COPY_H_ + +#include "fcpio.h" + +static inline unsigned int vnic_cq_copy_service( + struct vnic_cq *cq, + int (*q_service)(struct vnic_dev *vdev, + unsigned int index, + struct fcpio_fw_req *desc), + unsigned int work_to_do) + +{ + struct fcpio_fw_req *desc; + unsigned int work_done = 0; + u8 color; + + desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + fcpio_color_dec(desc, &color); + + while (color != cq->last_color) { + + if ((*q_service)(cq->vdev, cq->index, desc)) + break; + + cq->to_clean++; + if (cq->to_clean == cq->ring.desc_count) { + cq->to_clean = 0; + cq->last_color = cq->last_color ? 0 : 1; + } + + desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + fcpio_color_dec(desc, &color); + + work_done++; + if (work_done >= work_to_do) + break; + } + + return work_done; +} + +#endif /* _VNIC_CQ_COPY_H_ */ diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c new file mode 100644 index 000000000000..566770645086 --- /dev/null +++ b/drivers/scsi/fnic/vnic_dev.c @@ -0,0 +1,690 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include "vnic_resource.h" +#include "vnic_devcmd.h" +#include "vnic_dev.h" +#include "vnic_stats.h" + +struct vnic_res { + void __iomem *vaddr; + unsigned int count; +}; + +struct vnic_dev { + void *priv; + struct pci_dev *pdev; + struct vnic_res res[RES_TYPE_MAX]; + enum vnic_dev_intr_mode intr_mode; + struct vnic_devcmd __iomem *devcmd; + struct vnic_devcmd_notify *notify; + struct vnic_devcmd_notify notify_copy; + dma_addr_t notify_pa; + u32 *linkstatus; + dma_addr_t linkstatus_pa; + struct vnic_stats *stats; + dma_addr_t stats_pa; + struct vnic_devcmd_fw_info *fw_info; + dma_addr_t fw_info_pa; +}; + +#define VNIC_MAX_RES_HDR_SIZE \ + (sizeof(struct vnic_resource_header) + \ + sizeof(struct vnic_resource) * RES_TYPE_MAX) +#define VNIC_RES_STRIDE 128 + +void *vnic_dev_priv(struct vnic_dev *vdev) +{ + return vdev->priv; +} + +static int vnic_dev_discover_res(struct vnic_dev *vdev, + struct vnic_dev_bar *bar) +{ + struct vnic_resource_header __iomem *rh; + struct vnic_resource __iomem *r; + u8 type; + + if (bar->len < VNIC_MAX_RES_HDR_SIZE) { + printk(KERN_ERR "vNIC BAR0 res hdr length error\n"); + return -EINVAL; + } + + rh = bar->vaddr; + if (!rh) { + printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n"); + return -EINVAL; + } + + if (ioread32(&rh->magic) != VNIC_RES_MAGIC || + ioread32(&rh->version) != VNIC_RES_VERSION) { + printk(KERN_ERR "vNIC BAR0 res magic/version error " + "exp (%lx/%lx) curr (%x/%x)\n", + VNIC_RES_MAGIC, VNIC_RES_VERSION, + ioread32(&rh->magic), ioread32(&rh->version)); + return -EINVAL; + } + + r = (struct vnic_resource __iomem *)(rh + 1); + + while ((type = ioread8(&r->type)) != RES_TYPE_EOL) { + + u8 bar_num = ioread8(&r->bar); + u32 bar_offset = ioread32(&r->bar_offset); + u32 count = ioread32(&r->count); + u32 len; + + r++; + + if (bar_num != 0) /* only mapping in BAR0 resources */ + continue; + + switch (type) { + case RES_TYPE_WQ: + case RES_TYPE_RQ: + case RES_TYPE_CQ: + case RES_TYPE_INTR_CTRL: + /* each count is stride bytes long */ + len = count * VNIC_RES_STRIDE; + if (len + bar_offset > bar->len) { + printk(KERN_ERR "vNIC BAR0 resource %d " + "out-of-bounds, offset 0x%x + " + "size 0x%x > bar len 0x%lx\n", + type, bar_offset, + len, + bar->len); + return -EINVAL; + } + break; + case RES_TYPE_INTR_PBA_LEGACY: + case RES_TYPE_DEVCMD: + len = count; + break; + default: + continue; + } + + vdev->res[type].count = count; + vdev->res[type].vaddr = (char __iomem *)bar->vaddr + bar_offset; + } + + return 0; +} + +unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev, + enum vnic_res_type type) +{ + return vdev->res[type].count; +} + +void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type, + unsigned int index) +{ + if (!vdev->res[type].vaddr) + return NULL; + + switch (type) { + case RES_TYPE_WQ: + case RES_TYPE_RQ: + case RES_TYPE_CQ: + case RES_TYPE_INTR_CTRL: + return (char __iomem *)vdev->res[type].vaddr + + index * VNIC_RES_STRIDE; + default: + return (char __iomem *)vdev->res[type].vaddr; + } +} + +unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring, + unsigned int desc_count, + unsigned int desc_size) +{ + /* The base address of the desc rings must be 512 byte aligned. + * Descriptor count is aligned to groups of 32 descriptors. A + * count of 0 means the maximum 4096 descriptors. Descriptor + * size is aligned to 16 bytes. + */ + + unsigned int count_align = 32; + unsigned int desc_align = 16; + + ring->base_align = 512; + + if (desc_count == 0) + desc_count = 4096; + + ring->desc_count = ALIGN(desc_count, count_align); + + ring->desc_size = ALIGN(desc_size, desc_align); + + ring->size = ring->desc_count * ring->desc_size; + ring->size_unaligned = ring->size + ring->base_align; + + return ring->size_unaligned; +} + +void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring) +{ + memset(ring->descs, 0, ring->size); +} + +int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring, + unsigned int desc_count, unsigned int desc_size) +{ + vnic_dev_desc_ring_size(ring, desc_count, desc_size); + + ring->descs_unaligned = pci_alloc_consistent(vdev->pdev, + ring->size_unaligned, + &ring->base_addr_unaligned); + + if (!ring->descs_unaligned) { + printk(KERN_ERR + "Failed to allocate ring (size=%d), aborting\n", + (int)ring->size); + return -ENOMEM; + } + + ring->base_addr = ALIGN(ring->base_addr_unaligned, + ring->base_align); + ring->descs = (u8 *)ring->descs_unaligned + + (ring->base_addr - ring->base_addr_unaligned); + + vnic_dev_clear_desc_ring(ring); + + ring->desc_avail = ring->desc_count - 1; + + return 0; +} + +void vnic_dev_free_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring) +{ + if (ring->descs) { + pci_free_consistent(vdev->pdev, + ring->size_unaligned, + ring->descs_unaligned, + ring->base_addr_unaligned); + ring->descs = NULL; + } +} + +int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, + u64 *a0, u64 *a1, int wait) +{ + struct vnic_devcmd __iomem *devcmd = vdev->devcmd; + int delay; + u32 status; + int dev_cmd_err[] = { + /* convert from fw's version of error.h to host's version */ + 0, /* ERR_SUCCESS */ + EINVAL, /* ERR_EINVAL */ + EFAULT, /* ERR_EFAULT */ + EPERM, /* ERR_EPERM */ + EBUSY, /* ERR_EBUSY */ + }; + int err; + + status = ioread32(&devcmd->status); + if (status & STAT_BUSY) { + printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd)); + return -EBUSY; + } + + if (_CMD_DIR(cmd) & _CMD_DIR_WRITE) { + writeq(*a0, &devcmd->args[0]); + writeq(*a1, &devcmd->args[1]); + wmb(); + } + + iowrite32(cmd, &devcmd->cmd); + + if ((_CMD_FLAGS(cmd) & _CMD_FLAGS_NOWAIT)) + return 0; + + for (delay = 0; delay < wait; delay++) { + + udelay(100); + + status = ioread32(&devcmd->status); + if (!(status & STAT_BUSY)) { + + if (status & STAT_ERROR) { + err = dev_cmd_err[(int)readq(&devcmd->args[0])]; + printk(KERN_ERR "Error %d devcmd %d\n", + err, _CMD_N(cmd)); + return -err; + } + + if (_CMD_DIR(cmd) & _CMD_DIR_READ) { + rmb(); + *a0 = readq(&devcmd->args[0]); + *a1 = readq(&devcmd->args[1]); + } + + return 0; + } + } + + printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd)); + return -ETIMEDOUT; +} + +int vnic_dev_fw_info(struct vnic_dev *vdev, + struct vnic_devcmd_fw_info **fw_info) +{ + u64 a0, a1 = 0; + int wait = 1000; + int err = 0; + + if (!vdev->fw_info) { + vdev->fw_info = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_fw_info), + &vdev->fw_info_pa); + if (!vdev->fw_info) + return -ENOMEM; + + a0 = vdev->fw_info_pa; + + /* only get fw_info once and cache it */ + err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO, &a0, &a1, wait); + } + + *fw_info = vdev->fw_info; + + return err; +} + +int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, unsigned int size, + void *value) +{ + u64 a0, a1; + int wait = 1000; + int err; + + a0 = offset; + a1 = size; + + err = vnic_dev_cmd(vdev, CMD_DEV_SPEC, &a0, &a1, wait); + + switch (size) { + case 1: + *(u8 *)value = (u8)a0; + break; + case 2: + *(u16 *)value = (u16)a0; + break; + case 4: + *(u32 *)value = (u32)a0; + break; + case 8: + *(u64 *)value = a0; + break; + default: + BUG(); + break; + } + + return err; +} + +int vnic_dev_stats_clear(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_STATS_CLEAR, &a0, &a1, wait); +} + +int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats) +{ + u64 a0, a1; + int wait = 1000; + + if (!vdev->stats) { + vdev->stats = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_stats), &vdev->stats_pa); + if (!vdev->stats) + return -ENOMEM; + } + + *stats = vdev->stats; + a0 = vdev->stats_pa; + a1 = sizeof(struct vnic_stats); + + return vnic_dev_cmd(vdev, CMD_STATS_DUMP, &a0, &a1, wait); +} + +int vnic_dev_close(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_CLOSE, &a0, &a1, wait); +} + +int vnic_dev_enable(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_ENABLE, &a0, &a1, wait); +} + +int vnic_dev_disable(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_DISABLE, &a0, &a1, wait); +} + +int vnic_dev_open(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_OPEN, &a0, &a1, wait); +} + +int vnic_dev_open_done(struct vnic_dev *vdev, int *done) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + + *done = 0; + + err = vnic_dev_cmd(vdev, CMD_OPEN_STATUS, &a0, &a1, wait); + if (err) + return err; + + *done = (a0 == 0); + + return 0; +} + +int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_SOFT_RESET, &a0, &a1, wait); +} + +int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + + *done = 0; + + err = vnic_dev_cmd(vdev, CMD_SOFT_RESET_STATUS, &a0, &a1, wait); + if (err) + return err; + + *done = (a0 == 0); + + return 0; +} + +int vnic_dev_hang_notify(struct vnic_dev *vdev) +{ + u64 a0, a1; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_HANG_NOTIFY, &a0, &a1, wait); +} + +int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr) +{ + u64 a0, a1; + int wait = 1000; + int err, i; + + for (i = 0; i < ETH_ALEN; i++) + mac_addr[i] = 0; + + err = vnic_dev_cmd(vdev, CMD_MAC_ADDR, &a0, &a1, wait); + if (err) + return err; + + for (i = 0; i < ETH_ALEN; i++) + mac_addr[i] = ((u8 *)&a0)[i]; + + return 0; +} + +void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast, + int broadcast, int promisc, int allmulti) +{ + u64 a0, a1 = 0; + int wait = 1000; + int err; + + a0 = (directed ? CMD_PFILTER_DIRECTED : 0) | + (multicast ? CMD_PFILTER_MULTICAST : 0) | + (broadcast ? CMD_PFILTER_BROADCAST : 0) | + (promisc ? CMD_PFILTER_PROMISCUOUS : 0) | + (allmulti ? CMD_PFILTER_ALL_MULTICAST : 0); + + err = vnic_dev_cmd(vdev, CMD_PACKET_FILTER, &a0, &a1, wait); + if (err) + printk(KERN_ERR "Can't set packet filter\n"); +} + +void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + int i; + + for (i = 0; i < ETH_ALEN; i++) + ((u8 *)&a0)[i] = addr[i]; + + err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait); + if (err) + printk(KERN_ERR + "Can't add addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5], + err); +} + +void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + int i; + + for (i = 0; i < ETH_ALEN; i++) + ((u8 *)&a0)[i] = addr[i]; + + err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait); + if (err) + printk(KERN_ERR + "Can't del addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5], + err); +} + +int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr) +{ + u64 a0, a1; + int wait = 1000; + + if (!vdev->notify) { + vdev->notify = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_notify), + &vdev->notify_pa); + if (!vdev->notify) + return -ENOMEM; + } + + a0 = vdev->notify_pa; + a1 = ((u64)intr << 32) & 0x0000ffff00000000ULL; + a1 += sizeof(struct vnic_devcmd_notify); + + return vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait); +} + +void vnic_dev_notify_unset(struct vnic_dev *vdev) +{ + u64 a0, a1; + int wait = 1000; + + a0 = 0; /* paddr = 0 to unset notify buffer */ + a1 = 0x0000ffff00000000ULL; /* intr num = -1 to unreg for intr */ + a1 += sizeof(struct vnic_devcmd_notify); + + vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait); +} + +static int vnic_dev_notify_ready(struct vnic_dev *vdev) +{ + u32 *words; + unsigned int nwords = sizeof(struct vnic_devcmd_notify) / 4; + unsigned int i; + u32 csum; + + if (!vdev->notify) + return 0; + + do { + csum = 0; + memcpy(&vdev->notify_copy, vdev->notify, + sizeof(struct vnic_devcmd_notify)); + words = (u32 *)&vdev->notify_copy; + for (i = 1; i < nwords; i++) + csum += words[i]; + } while (csum != words[0]); + + return 1; +} + +int vnic_dev_init(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_INIT, &a0, &a1, wait); +} + +int vnic_dev_link_status(struct vnic_dev *vdev) +{ + if (vdev->linkstatus) + return *vdev->linkstatus; + + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.link_state; +} + +u32 vnic_dev_port_speed(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.port_speed; +} + +u32 vnic_dev_msg_lvl(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.msglvl; +} + +u32 vnic_dev_mtu(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.mtu; +} + +u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.link_down_cnt; +} + +void vnic_dev_set_intr_mode(struct vnic_dev *vdev, + enum vnic_dev_intr_mode intr_mode) +{ + vdev->intr_mode = intr_mode; +} + +enum vnic_dev_intr_mode vnic_dev_get_intr_mode( + struct vnic_dev *vdev) +{ + return vdev->intr_mode; +} + +void vnic_dev_unregister(struct vnic_dev *vdev) +{ + if (vdev) { + if (vdev->notify) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_notify), + vdev->notify, + vdev->notify_pa); + if (vdev->linkstatus) + pci_free_consistent(vdev->pdev, + sizeof(u32), + vdev->linkstatus, + vdev->linkstatus_pa); + if (vdev->stats) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_dev), + vdev->stats, vdev->stats_pa); + if (vdev->fw_info) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_fw_info), + vdev->fw_info, vdev->fw_info_pa); + kfree(vdev); + } +} + +struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev, + void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar) +{ + if (!vdev) { + vdev = kzalloc(sizeof(struct vnic_dev), GFP_KERNEL); + if (!vdev) + return NULL; + } + + vdev->priv = priv; + vdev->pdev = pdev; + + if (vnic_dev_discover_res(vdev, bar)) + goto err_out; + + vdev->devcmd = vnic_dev_get_res(vdev, RES_TYPE_DEVCMD, 0); + if (!vdev->devcmd) + goto err_out; + + return vdev; + +err_out: + vnic_dev_unregister(vdev); + return NULL; +} diff --git a/drivers/scsi/fnic/vnic_dev.h b/drivers/scsi/fnic/vnic_dev.h new file mode 100644 index 000000000000..f9935a8a5a09 --- /dev/null +++ b/drivers/scsi/fnic/vnic_dev.h @@ -0,0 +1,161 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_DEV_H_ +#define _VNIC_DEV_H_ + +#include "vnic_resource.h" +#include "vnic_devcmd.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_dev_priv fnic_dev_priv +#define vnic_dev_get_res_count fnic_dev_get_res_count +#define vnic_dev_get_res fnic_dev_get_res +#define vnic_dev_desc_ring_size fnic_dev_desc_ring_siz +#define vnic_dev_clear_desc_ring fnic_dev_clear_desc_ring +#define vnic_dev_alloc_desc_ring fnic_dev_alloc_desc_ring +#define vnic_dev_free_desc_ring fnic_dev_free_desc_ring +#define vnic_dev_cmd fnic_dev_cmd +#define vnic_dev_fw_info fnic_dev_fw_info +#define vnic_dev_spec fnic_dev_spec +#define vnic_dev_stats_clear fnic_dev_stats_clear +#define vnic_dev_stats_dump fnic_dev_stats_dump +#define vnic_dev_hang_notify fnic_dev_hang_notify +#define vnic_dev_packet_filter fnic_dev_packet_filter +#define vnic_dev_add_addr fnic_dev_add_addr +#define vnic_dev_del_addr fnic_dev_del_addr +#define vnic_dev_mac_addr fnic_dev_mac_addr +#define vnic_dev_notify_set fnic_dev_notify_set +#define vnic_dev_notify_unset fnic_dev_notify_unset +#define vnic_dev_link_status fnic_dev_link_status +#define vnic_dev_port_speed fnic_dev_port_speed +#define vnic_dev_msg_lvl fnic_dev_msg_lvl +#define vnic_dev_mtu fnic_dev_mtu +#define vnic_dev_link_down_cnt fnic_dev_link_down_cnt +#define vnic_dev_close fnic_dev_close +#define vnic_dev_enable fnic_dev_enable +#define vnic_dev_disable fnic_dev_disable +#define vnic_dev_open fnic_dev_open +#define vnic_dev_open_done fnic_dev_open_done +#define vnic_dev_init fnic_dev_init +#define vnic_dev_soft_reset fnic_dev_soft_reset +#define vnic_dev_soft_reset_done fnic_dev_soft_reset_done +#define vnic_dev_set_intr_mode fnic_dev_set_intr_mode +#define vnic_dev_get_intr_mode fnic_dev_get_intr_mode +#define vnic_dev_unregister fnic_dev_unregister +#define vnic_dev_register fnic_dev_register + +#ifndef VNIC_PADDR_TARGET +#define VNIC_PADDR_TARGET 0x0000000000000000ULL +#endif + +#ifndef readq +static inline u64 readq(void __iomem *reg) +{ + return ((u64)readl(reg + 0x4UL) << 32) | (u64)readl(reg); +} + +static inline void writeq(u64 val, void __iomem *reg) +{ + writel(val & 0xffffffff, reg); + writel(val >> 32, reg + 0x4UL); +} +#endif + +enum vnic_dev_intr_mode { + VNIC_DEV_INTR_MODE_UNKNOWN, + VNIC_DEV_INTR_MODE_INTX, + VNIC_DEV_INTR_MODE_MSI, + VNIC_DEV_INTR_MODE_MSIX, +}; + +struct vnic_dev_bar { + void __iomem *vaddr; + dma_addr_t bus_addr; + unsigned long len; +}; + +struct vnic_dev_ring { + void *descs; + size_t size; + dma_addr_t base_addr; + size_t base_align; + void *descs_unaligned; + size_t size_unaligned; + dma_addr_t base_addr_unaligned; + unsigned int desc_size; + unsigned int desc_count; + unsigned int desc_avail; +}; + +struct vnic_dev; +struct vnic_stats; + +void *vnic_dev_priv(struct vnic_dev *vdev); +unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev, + enum vnic_res_type type); +void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type, + unsigned int index); +unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring, + unsigned int desc_count, + unsigned int desc_size); +void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring); +int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring, + unsigned int desc_count, unsigned int desc_size); +void vnic_dev_free_desc_ring(struct vnic_dev *vdev, + struct vnic_dev_ring *ring); +int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, + u64 *a0, u64 *a1, int wait); +int vnic_dev_fw_info(struct vnic_dev *vdev, + struct vnic_devcmd_fw_info **fw_info); +int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, + unsigned int size, void *value); +int vnic_dev_stats_clear(struct vnic_dev *vdev); +int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats); +int vnic_dev_hang_notify(struct vnic_dev *vdev); +void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast, + int broadcast, int promisc, int allmulti); +void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr); +void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr); +int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr); +int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr); +void vnic_dev_notify_unset(struct vnic_dev *vdev); +int vnic_dev_link_status(struct vnic_dev *vdev); +u32 vnic_dev_port_speed(struct vnic_dev *vdev); +u32 vnic_dev_msg_lvl(struct vnic_dev *vdev); +u32 vnic_dev_mtu(struct vnic_dev *vdev); +u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev); +int vnic_dev_close(struct vnic_dev *vdev); +int vnic_dev_enable(struct vnic_dev *vdev); +int vnic_dev_disable(struct vnic_dev *vdev); +int vnic_dev_open(struct vnic_dev *vdev, int arg); +int vnic_dev_open_done(struct vnic_dev *vdev, int *done); +int vnic_dev_init(struct vnic_dev *vdev, int arg); +int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg); +int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done); +void vnic_dev_set_intr_mode(struct vnic_dev *vdev, + enum vnic_dev_intr_mode intr_mode); +enum vnic_dev_intr_mode vnic_dev_get_intr_mode(struct vnic_dev *vdev); +void vnic_dev_unregister(struct vnic_dev *vdev); +struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev, + void *priv, struct pci_dev *pdev, + struct vnic_dev_bar *bar); + +#endif /* _VNIC_DEV_H_ */ diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h new file mode 100644 index 000000000000..d62b9061bf12 --- /dev/null +++ b/drivers/scsi/fnic/vnic_devcmd.h @@ -0,0 +1,281 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_DEVCMD_H_ +#define _VNIC_DEVCMD_H_ + +#define _CMD_NBITS 14 +#define _CMD_VTYPEBITS 10 +#define _CMD_FLAGSBITS 6 +#define _CMD_DIRBITS 2 + +#define _CMD_NMASK ((1 << _CMD_NBITS)-1) +#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1) +#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1) +#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1) + +#define _CMD_NSHIFT 0 +#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS) +#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS) +#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS) + +/* + * Direction bits (from host perspective). + */ +#define _CMD_DIR_NONE 0U +#define _CMD_DIR_WRITE 1U +#define _CMD_DIR_READ 2U +#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ) + +/* + * Flag bits. + */ +#define _CMD_FLAGS_NONE 0U +#define _CMD_FLAGS_NOWAIT 1U + +/* + * vNIC type bits. + */ +#define _CMD_VTYPE_NONE 0U +#define _CMD_VTYPE_ENET 1U +#define _CMD_VTYPE_FC 2U +#define _CMD_VTYPE_SCSI 4U +#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI) + +/* + * Used to create cmds.. +*/ +#define _CMDCF(dir, flags, vtype, nr) \ + (((dir) << _CMD_DIRSHIFT) | \ + ((flags) << _CMD_FLAGSSHIFT) | \ + ((vtype) << _CMD_VTYPESHIFT) | \ + ((nr) << _CMD_NSHIFT)) +#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr) +#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr) + +/* + * Used to decode cmds.. +*/ +#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK) +#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK) +#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK) +#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK) + +enum vnic_devcmd_cmd { + CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0), + + /* mcpu fw info in mem: (u64)a0=paddr to struct vnic_devcmd_fw_info */ + CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1), + + /* dev-specific block member: + * in: (u16)a0=offset,(u8)a1=size + * out: a0=value */ + CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2), + + /* stats clear */ + CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3), + + /* stats dump in mem: (u64)a0=paddr to stats area, + * (u16)a1=sizeof stats area */ + CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4), + + /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */ + CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7), + + /* hang detection notification */ + CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8), + + /* MAC address in (u48)a0 */ + CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9), + + /* disable/enable promisc mode: (u8)a0=0/1 */ +/***** XXX DEPRECATED *****/ + CMD_PROMISC_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10), + + /* disable/enable all-multi mode: (u8)a0=0/1 */ +/***** XXX DEPRECATED *****/ + CMD_ALLMULTI_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11), + + /* add addr from (u48)a0 */ + CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12), + + /* del addr from (u48)a0 */ + CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13), + + /* add VLAN id in (u16)a0 */ + CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14), + + /* del VLAN id in (u16)a0 */ + CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15), + + /* nic_cfg in (u32)a0 */ + CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), + + /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */ + CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17), + + /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */ + CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18), + + /* initiate softreset */ + CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19), + + /* softreset status: + * out: a0=0 reset complete, a0=1 reset in progress */ + CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20), + + /* set struct vnic_devcmd_notify buffer in mem: + * in: + * (u64)a0=paddr to notify (set paddr=0 to unset) + * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) + * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) + * out: + * (u32)a1 = effective size + */ + CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21), + + /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct, + * (u8)a1=PXENV_UNDI_xxx */ + CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22), + + /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */ + CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23), + + /* open status: + * out: a0=0 open complete, a0=1 open in progress */ + CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24), + + /* close vnic */ + CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25), + + /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ + CMD_INIT = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26), + + /* variant of CMD_INIT, with provisioning info + * (u64)a0=paddr of vnic_devcmd_provinfo + * (u32)a1=sizeof provision info */ + CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27), + + /* enable virtual link */ + CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), + + /* disable virtual link */ + CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29), + + /* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */ + CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30), + + /* init status: + * out: a0=0 init complete, a0=1 init in progress + * if a0=0, a1=errno */ + CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31), + + /* INT13 API: (u64)a0=paddr to vnic_int13_params struct + * (u8)a1=INT13_CMD_xxx */ + CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32), + + /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */ + CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33), + + /* undo initialize of virtual link */ + CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34), +}; + +/* flags for CMD_OPEN */ +#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */ + +/* flags for CMD_INIT */ +#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */ + +/* flags for CMD_PACKET_FILTER */ +#define CMD_PFILTER_DIRECTED 0x01 +#define CMD_PFILTER_MULTICAST 0x02 +#define CMD_PFILTER_BROADCAST 0x04 +#define CMD_PFILTER_PROMISCUOUS 0x08 +#define CMD_PFILTER_ALL_MULTICAST 0x10 + +enum vnic_devcmd_status { + STAT_NONE = 0, + STAT_BUSY = 1 << 0, /* cmd in progress */ + STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */ +}; + +enum vnic_devcmd_error { + ERR_SUCCESS = 0, + ERR_EINVAL = 1, + ERR_EFAULT = 2, + ERR_EPERM = 3, + ERR_EBUSY = 4, + ERR_ECMDUNKNOWN = 5, + ERR_EBADSTATE = 6, + ERR_ENOMEM = 7, + ERR_ETIMEDOUT = 8, + ERR_ELINKDOWN = 9, +}; + +struct vnic_devcmd_fw_info { + char fw_version[32]; + char fw_build[32]; + char hw_version[32]; + char hw_serial_number[32]; +}; + +struct vnic_devcmd_notify { + u32 csum; /* checksum over following words */ + + u32 link_state; /* link up == 1 */ + u32 port_speed; /* effective port speed (rate limit) */ + u32 mtu; /* MTU */ + u32 msglvl; /* requested driver msg lvl */ + u32 uif; /* uplink interface */ + u32 status; /* status bits (see VNIC_STF_*) */ + u32 error; /* error code (see ERR_*) for first ERR */ + u32 link_down_cnt; /* running count of link down transitions */ +}; +#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */ + +struct vnic_devcmd_provinfo { + u8 oui[3]; + u8 type; + u8 data[0]; +}; + +/* + * Writing cmd register causes STAT_BUSY to get set in status register. + * When cmd completes, STAT_BUSY will be cleared. + * + * If cmd completed successfully STAT_ERROR will be clear + * and args registers contain cmd-specific results. + * + * If cmd error, STAT_ERROR will be set and args[0] contains error code. + * + * status register is read-only. While STAT_BUSY is set, + * all other register contents are read-only. + */ + +/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */ +#define VNIC_DEVCMD_NARGS 15 +struct vnic_devcmd { + u32 status; /* RO */ + u32 cmd; /* RW */ + u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */ +}; + +#endif /* _VNIC_DEVCMD_H_ */ diff --git a/drivers/scsi/fnic/vnic_intr.c b/drivers/scsi/fnic/vnic_intr.c new file mode 100644 index 000000000000..4f4dc8793d23 --- /dev/null +++ b/drivers/scsi/fnic/vnic_intr.c @@ -0,0 +1,60 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_intr.h" + +void vnic_intr_free(struct vnic_intr *intr) +{ + intr->ctrl = NULL; +} + +int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, + unsigned int index) +{ + intr->index = index; + intr->vdev = vdev; + + intr->ctrl = vnic_dev_get_res(vdev, RES_TYPE_INTR_CTRL, index); + if (!intr->ctrl) { + printk(KERN_ERR "Failed to hook INTR[%d].ctrl resource\n", + index); + return -EINVAL; + } + + return 0; +} + +void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, + unsigned int coalescing_type, unsigned int mask_on_assertion) +{ + iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer); + iowrite32(coalescing_type, &intr->ctrl->coalescing_type); + iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion); + iowrite32(0, &intr->ctrl->int_credits); +} + +void vnic_intr_clean(struct vnic_intr *intr) +{ + iowrite32(0, &intr->ctrl->int_credits); +} diff --git a/drivers/scsi/fnic/vnic_intr.h b/drivers/scsi/fnic/vnic_intr.h new file mode 100644 index 000000000000..d5fb40e7c98e --- /dev/null +++ b/drivers/scsi/fnic/vnic_intr.h @@ -0,0 +1,118 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_INTR_H_ +#define _VNIC_INTR_H_ + +#include +#include "vnic_dev.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_intr_unmask fnic_intr_unmask +#define vnic_intr_mask fnic_intr_mask +#define vnic_intr_return_credits fnic_intr_return_credits +#define vnic_intr_credits fnic_intr_credits +#define vnic_intr_return_all_credits fnic_intr_return_all_credits +#define vnic_intr_legacy_pba fnic_intr_legacy_pba +#define vnic_intr_free fnic_intr_free +#define vnic_intr_alloc fnic_intr_alloc +#define vnic_intr_init fnic_intr_init +#define vnic_intr_clean fnic_intr_clean + +#define VNIC_INTR_TIMER_MAX 0xffff + +#define VNIC_INTR_TIMER_TYPE_ABS 0 +#define VNIC_INTR_TIMER_TYPE_QUIET 1 + +/* Interrupt control */ +struct vnic_intr_ctrl { + u32 coalescing_timer; /* 0x00 */ + u32 pad0; + u32 coalescing_value; /* 0x08 */ + u32 pad1; + u32 coalescing_type; /* 0x10 */ + u32 pad2; + u32 mask_on_assertion; /* 0x18 */ + u32 pad3; + u32 mask; /* 0x20 */ + u32 pad4; + u32 int_credits; /* 0x28 */ + u32 pad5; + u32 int_credit_return; /* 0x30 */ + u32 pad6; +}; + +struct vnic_intr { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_intr_ctrl __iomem *ctrl; /* memory-mapped */ +}; + +static inline void vnic_intr_unmask(struct vnic_intr *intr) +{ + iowrite32(0, &intr->ctrl->mask); +} + +static inline void vnic_intr_mask(struct vnic_intr *intr) +{ + iowrite32(1, &intr->ctrl->mask); +} + +static inline void vnic_intr_return_credits(struct vnic_intr *intr, + unsigned int credits, int unmask, int reset_timer) +{ +#define VNIC_INTR_UNMASK_SHIFT 16 +#define VNIC_INTR_RESET_TIMER_SHIFT 17 + + u32 int_credit_return = (credits & 0xffff) | + (unmask ? (1 << VNIC_INTR_UNMASK_SHIFT) : 0) | + (reset_timer ? (1 << VNIC_INTR_RESET_TIMER_SHIFT) : 0); + + iowrite32(int_credit_return, &intr->ctrl->int_credit_return); +} + +static inline unsigned int vnic_intr_credits(struct vnic_intr *intr) +{ + return ioread32(&intr->ctrl->int_credits); +} + +static inline void vnic_intr_return_all_credits(struct vnic_intr *intr) +{ + unsigned int credits = vnic_intr_credits(intr); + int unmask = 1; + int reset_timer = 1; + + vnic_intr_return_credits(intr, credits, unmask, reset_timer); +} + +static inline u32 vnic_intr_legacy_pba(u32 __iomem *legacy_pba) +{ + /* read PBA without clearing */ + return ioread32(legacy_pba); +} + +void vnic_intr_free(struct vnic_intr *intr); +int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, + unsigned int index); +void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, + unsigned int coalescing_type, unsigned int mask_on_assertion); +void vnic_intr_clean(struct vnic_intr *intr); + +#endif /* _VNIC_INTR_H_ */ diff --git a/drivers/scsi/fnic/vnic_nic.h b/drivers/scsi/fnic/vnic_nic.h new file mode 100644 index 000000000000..f15b83eeaced --- /dev/null +++ b/drivers/scsi/fnic/vnic_nic.h @@ -0,0 +1,69 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_NIC_H_ +#define _VNIC_NIC_H_ + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_set_nic_cfg fnic_set_nic_cfg + +#define NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD 0xffUL +#define NIC_CFG_RSS_DEFAULT_CPU_SHIFT 0 +#define NIC_CFG_RSS_HASH_TYPE (0xffUL << 8) +#define NIC_CFG_RSS_HASH_TYPE_MASK_FIELD 0xffUL +#define NIC_CFG_RSS_HASH_TYPE_SHIFT 8 +#define NIC_CFG_RSS_HASH_BITS (7UL << 16) +#define NIC_CFG_RSS_HASH_BITS_MASK_FIELD 7UL +#define NIC_CFG_RSS_HASH_BITS_SHIFT 16 +#define NIC_CFG_RSS_BASE_CPU (7UL << 19) +#define NIC_CFG_RSS_BASE_CPU_MASK_FIELD 7UL +#define NIC_CFG_RSS_BASE_CPU_SHIFT 19 +#define NIC_CFG_RSS_ENABLE (1UL << 22) +#define NIC_CFG_RSS_ENABLE_MASK_FIELD 1UL +#define NIC_CFG_RSS_ENABLE_SHIFT 22 +#define NIC_CFG_TSO_IPID_SPLIT_EN (1UL << 23) +#define NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD 1UL +#define NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT 23 +#define NIC_CFG_IG_VLAN_STRIP_EN (1UL << 24) +#define NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD 1UL +#define NIC_CFG_IG_VLAN_STRIP_EN_SHIFT 24 + +static inline void vnic_set_nic_cfg(u32 *nic_cfg, + u8 rss_default_cpu, u8 rss_hash_type, + u8 rss_hash_bits, u8 rss_base_cpu, + u8 rss_enable, u8 tso_ipid_split_en, + u8 ig_vlan_strip_en) +{ + *nic_cfg = (rss_default_cpu & NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD) | + ((rss_hash_type & NIC_CFG_RSS_HASH_TYPE_MASK_FIELD) + << NIC_CFG_RSS_HASH_TYPE_SHIFT) | + ((rss_hash_bits & NIC_CFG_RSS_HASH_BITS_MASK_FIELD) + << NIC_CFG_RSS_HASH_BITS_SHIFT) | + ((rss_base_cpu & NIC_CFG_RSS_BASE_CPU_MASK_FIELD) + << NIC_CFG_RSS_BASE_CPU_SHIFT) | + ((rss_enable & NIC_CFG_RSS_ENABLE_MASK_FIELD) + << NIC_CFG_RSS_ENABLE_SHIFT) | + ((tso_ipid_split_en & NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD) + << NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT) | + ((ig_vlan_strip_en & NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD) + << NIC_CFG_IG_VLAN_STRIP_EN_SHIFT); +} + +#endif /* _VNIC_NIC_H_ */ diff --git a/drivers/scsi/fnic/vnic_resource.h b/drivers/scsi/fnic/vnic_resource.h new file mode 100644 index 000000000000..2d842f79d41a --- /dev/null +++ b/drivers/scsi/fnic/vnic_resource.h @@ -0,0 +1,61 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_RESOURCE_H_ +#define _VNIC_RESOURCE_H_ + +#define VNIC_RES_MAGIC 0x766E6963L /* 'vnic' */ +#define VNIC_RES_VERSION 0x00000000L + +/* vNIC resource types */ +enum vnic_res_type { + RES_TYPE_EOL, /* End-of-list */ + RES_TYPE_WQ, /* Work queues */ + RES_TYPE_RQ, /* Receive queues */ + RES_TYPE_CQ, /* Completion queues */ + RES_TYPE_RSVD1, + RES_TYPE_NIC_CFG, /* Enet NIC config registers */ + RES_TYPE_RSVD2, + RES_TYPE_RSVD3, + RES_TYPE_RSVD4, + RES_TYPE_RSVD5, + RES_TYPE_INTR_CTRL, /* Interrupt ctrl table */ + RES_TYPE_INTR_TABLE, /* MSI/MSI-X Interrupt table */ + RES_TYPE_INTR_PBA, /* MSI/MSI-X PBA table */ + RES_TYPE_INTR_PBA_LEGACY, /* Legacy intr status */ + RES_TYPE_RSVD6, + RES_TYPE_RSVD7, + RES_TYPE_DEVCMD, /* Device command region */ + RES_TYPE_PASS_THRU_PAGE, /* Pass-thru page */ + + RES_TYPE_MAX, /* Count of resource types */ +}; + +struct vnic_resource_header { + u32 magic; + u32 version; +}; + +struct vnic_resource { + u8 type; + u8 bar; + u8 pad[2]; + u32 bar_offset; + u32 count; +}; + +#endif /* _VNIC_RESOURCE_H_ */ diff --git a/drivers/scsi/fnic/vnic_rq.c b/drivers/scsi/fnic/vnic_rq.c new file mode 100644 index 000000000000..bedd0d285630 --- /dev/null +++ b/drivers/scsi/fnic/vnic_rq.c @@ -0,0 +1,196 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_rq.h" + +static int vnic_rq_alloc_bufs(struct vnic_rq *rq) +{ + struct vnic_rq_buf *buf; + struct vnic_dev *vdev; + unsigned int i, j, count = rq->ring.desc_count; + unsigned int blks = VNIC_RQ_BUF_BLKS_NEEDED(count); + + vdev = rq->vdev; + + for (i = 0; i < blks; i++) { + rq->bufs[i] = kzalloc(VNIC_RQ_BUF_BLK_SZ, GFP_ATOMIC); + if (!rq->bufs[i]) { + printk(KERN_ERR "Failed to alloc rq_bufs\n"); + return -ENOMEM; + } + } + + for (i = 0; i < blks; i++) { + buf = rq->bufs[i]; + for (j = 0; j < VNIC_RQ_BUF_BLK_ENTRIES; j++) { + buf->index = i * VNIC_RQ_BUF_BLK_ENTRIES + j; + buf->desc = (u8 *)rq->ring.descs + + rq->ring.desc_size * buf->index; + if (buf->index + 1 == count) { + buf->next = rq->bufs[0]; + break; + } else if (j + 1 == VNIC_RQ_BUF_BLK_ENTRIES) { + buf->next = rq->bufs[i + 1]; + } else { + buf->next = buf + 1; + buf++; + } + } + } + + rq->to_use = rq->to_clean = rq->bufs[0]; + rq->buf_index = 0; + + return 0; +} + +void vnic_rq_free(struct vnic_rq *rq) +{ + struct vnic_dev *vdev; + unsigned int i; + + vdev = rq->vdev; + + vnic_dev_free_desc_ring(vdev, &rq->ring); + + for (i = 0; i < VNIC_RQ_BUF_BLKS_MAX; i++) { + kfree(rq->bufs[i]); + rq->bufs[i] = NULL; + } + + rq->ctrl = NULL; +} + +int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + rq->index = index; + rq->vdev = vdev; + + rq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_RQ, index); + if (!rq->ctrl) { + printk(KERN_ERR "Failed to hook RQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_rq_disable(rq); + + err = vnic_dev_alloc_desc_ring(vdev, &rq->ring, desc_count, desc_size); + if (err) + return err; + + err = vnic_rq_alloc_bufs(rq); + if (err) { + vnic_rq_free(rq); + return err; + } + + return 0; +} + +void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + u32 fetch_index; + + paddr = (u64)rq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &rq->ctrl->ring_base); + iowrite32(rq->ring.desc_count, &rq->ctrl->ring_size); + iowrite32(cq_index, &rq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &rq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &rq->ctrl->error_interrupt_offset); + iowrite32(0, &rq->ctrl->dropped_packet_count); + iowrite32(0, &rq->ctrl->error_status); + + /* Use current fetch_index as the ring starting point */ + fetch_index = ioread32(&rq->ctrl->fetch_index); + rq->to_use = rq->to_clean = + &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES] + [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES]; + iowrite32(fetch_index, &rq->ctrl->posted_index); + + rq->buf_index = 0; +} + +unsigned int vnic_rq_error_status(struct vnic_rq *rq) +{ + return ioread32(&rq->ctrl->error_status); +} + +void vnic_rq_enable(struct vnic_rq *rq) +{ + iowrite32(1, &rq->ctrl->enable); +} + +int vnic_rq_disable(struct vnic_rq *rq) +{ + unsigned int wait; + + iowrite32(0, &rq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&rq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable RQ[%d]\n", rq->index); + + return -ETIMEDOUT; +} + +void vnic_rq_clean(struct vnic_rq *rq, + void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf)) +{ + struct vnic_rq_buf *buf; + u32 fetch_index; + + BUG_ON(ioread32(&rq->ctrl->enable)); + + buf = rq->to_clean; + + while (vnic_rq_desc_used(rq) > 0) { + + (*buf_clean)(rq, buf); + + buf = rq->to_clean = buf->next; + rq->ring.desc_avail++; + } + + /* Use current fetch_index as the ring starting point */ + fetch_index = ioread32(&rq->ctrl->fetch_index); + rq->to_use = rq->to_clean = + &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES] + [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES]; + iowrite32(fetch_index, &rq->ctrl->posted_index); + + rq->buf_index = 0; + + vnic_dev_clear_desc_ring(&rq->ring); +} + diff --git a/drivers/scsi/fnic/vnic_rq.h b/drivers/scsi/fnic/vnic_rq.h new file mode 100644 index 000000000000..aebdfbd6ad3c --- /dev/null +++ b/drivers/scsi/fnic/vnic_rq.h @@ -0,0 +1,235 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_RQ_H_ +#define _VNIC_RQ_H_ + +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_rq_desc_avail fnic_rq_desc_avail +#define vnic_rq_desc_used fnic_rq_desc_used +#define vnic_rq_next_desc fnic_rq_next_desc +#define vnic_rq_next_index fnic_rq_next_index +#define vnic_rq_next_buf_index fnic_rq_next_buf_index +#define vnic_rq_post fnic_rq_post +#define vnic_rq_posting_soon fnic_rq_posting_soon +#define vnic_rq_return_descs fnic_rq_return_descs +#define vnic_rq_service fnic_rq_service +#define vnic_rq_fill fnic_rq_fill +#define vnic_rq_free fnic_rq_free +#define vnic_rq_alloc fnic_rq_alloc +#define vnic_rq_init fnic_rq_init +#define vnic_rq_error_status fnic_rq_error_status +#define vnic_rq_enable fnic_rq_enable +#define vnic_rq_disable fnic_rq_disable +#define vnic_rq_clean fnic_rq_clean + +/* Receive queue control */ +struct vnic_rq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 posted_index; /* 0x10 */ + u32 pad1; + u32 cq_index; /* 0x18 */ + u32 pad2; + u32 enable; /* 0x20 */ + u32 pad3; + u32 running; /* 0x28 */ + u32 pad4; + u32 fetch_index; /* 0x30 */ + u32 pad5; + u32 error_interrupt_enable; /* 0x38 */ + u32 pad6; + u32 error_interrupt_offset; /* 0x40 */ + u32 pad7; + u32 error_status; /* 0x48 */ + u32 pad8; + u32 dropped_packet_count; /* 0x50 */ + u32 pad9; + u32 dropped_packet_count_rc; /* 0x58 */ + u32 pad10; +}; + +/* Break the vnic_rq_buf allocations into blocks of 64 entries */ +#define VNIC_RQ_BUF_BLK_ENTRIES 64 +#define VNIC_RQ_BUF_BLK_SZ \ + (VNIC_RQ_BUF_BLK_ENTRIES * sizeof(struct vnic_rq_buf)) +#define VNIC_RQ_BUF_BLKS_NEEDED(entries) \ + DIV_ROUND_UP(entries, VNIC_RQ_BUF_BLK_ENTRIES) +#define VNIC_RQ_BUF_BLKS_MAX VNIC_RQ_BUF_BLKS_NEEDED(4096) + +struct vnic_rq_buf { + struct vnic_rq_buf *next; + dma_addr_t dma_addr; + void *os_buf; + unsigned int os_buf_index; + unsigned int len; + unsigned int index; + void *desc; +}; + +struct vnic_rq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_rq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + struct vnic_rq_buf *bufs[VNIC_RQ_BUF_BLKS_MAX]; + struct vnic_rq_buf *to_use; + struct vnic_rq_buf *to_clean; + void *os_buf_head; + unsigned int buf_index; + unsigned int pkts_outstanding; +}; + +static inline unsigned int vnic_rq_desc_avail(struct vnic_rq *rq) +{ + /* how many does SW own? */ + return rq->ring.desc_avail; +} + +static inline unsigned int vnic_rq_desc_used(struct vnic_rq *rq) +{ + /* how many does HW own? */ + return rq->ring.desc_count - rq->ring.desc_avail - 1; +} + +static inline void *vnic_rq_next_desc(struct vnic_rq *rq) +{ + return rq->to_use->desc; +} + +static inline unsigned int vnic_rq_next_index(struct vnic_rq *rq) +{ + return rq->to_use->index; +} + +static inline unsigned int vnic_rq_next_buf_index(struct vnic_rq *rq) +{ + return rq->buf_index++; +} + +static inline void vnic_rq_post(struct vnic_rq *rq, + void *os_buf, unsigned int os_buf_index, + dma_addr_t dma_addr, unsigned int len) +{ + struct vnic_rq_buf *buf = rq->to_use; + + buf->os_buf = os_buf; + buf->os_buf_index = os_buf_index; + buf->dma_addr = dma_addr; + buf->len = len; + + buf = buf->next; + rq->to_use = buf; + rq->ring.desc_avail--; + + /* Move the posted_index every nth descriptor + */ + +#ifndef VNIC_RQ_RETURN_RATE +#define VNIC_RQ_RETURN_RATE 0xf /* keep 2^n - 1 */ +#endif + + if ((buf->index & VNIC_RQ_RETURN_RATE) == 0) { + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + iowrite32(buf->index, &rq->ctrl->posted_index); + } +} + +static inline int vnic_rq_posting_soon(struct vnic_rq *rq) +{ + return (rq->to_use->index & VNIC_RQ_RETURN_RATE) == 0; +} + +static inline void vnic_rq_return_descs(struct vnic_rq *rq, unsigned int count) +{ + rq->ring.desc_avail += count; +} + +enum desc_return_options { + VNIC_RQ_RETURN_DESC, + VNIC_RQ_DEFER_RETURN_DESC, +}; + +static inline void vnic_rq_service(struct vnic_rq *rq, + struct cq_desc *cq_desc, u16 completed_index, + int desc_return, void (*buf_service)(struct vnic_rq *rq, + struct cq_desc *cq_desc, struct vnic_rq_buf *buf, + int skipped, void *opaque), void *opaque) +{ + struct vnic_rq_buf *buf; + int skipped; + + buf = rq->to_clean; + while (1) { + + skipped = (buf->index != completed_index); + + (*buf_service)(rq, cq_desc, buf, skipped, opaque); + + if (desc_return == VNIC_RQ_RETURN_DESC) + rq->ring.desc_avail++; + + rq->to_clean = buf->next; + + if (!skipped) + break; + + buf = rq->to_clean; + } +} + +static inline int vnic_rq_fill(struct vnic_rq *rq, + int (*buf_fill)(struct vnic_rq *rq)) +{ + int err; + + while (vnic_rq_desc_avail(rq) > 1) { + + err = (*buf_fill)(rq); + if (err) + return err; + } + + return 0; +} + +void vnic_rq_free(struct vnic_rq *rq); +int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +unsigned int vnic_rq_error_status(struct vnic_rq *rq); +void vnic_rq_enable(struct vnic_rq *rq); +int vnic_rq_disable(struct vnic_rq *rq); +void vnic_rq_clean(struct vnic_rq *rq, + void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf)); + +#endif /* _VNIC_RQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_scsi.h b/drivers/scsi/fnic/vnic_scsi.h new file mode 100644 index 000000000000..46baa5254001 --- /dev/null +++ b/drivers/scsi/fnic/vnic_scsi.h @@ -0,0 +1,99 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_SCSI_H_ +#define _VNIC_SCSI_H_ + +#define VNIC_FNIC_WQ_COPY_COUNT_MIN 1 +#define VNIC_FNIC_WQ_COPY_COUNT_MAX 1 + +#define VNIC_FNIC_WQ_DESCS_MIN 64 +#define VNIC_FNIC_WQ_DESCS_MAX 128 + +#define VNIC_FNIC_WQ_COPY_DESCS_MIN 64 +#define VNIC_FNIC_WQ_COPY_DESCS_MAX 512 + +#define VNIC_FNIC_RQ_DESCS_MIN 64 +#define VNIC_FNIC_RQ_DESCS_MAX 128 + +#define VNIC_FNIC_EDTOV_MIN 1000 +#define VNIC_FNIC_EDTOV_MAX 255000 +#define VNIC_FNIC_EDTOV_DEF 2000 + +#define VNIC_FNIC_RATOV_MIN 1000 +#define VNIC_FNIC_RATOV_MAX 255000 + +#define VNIC_FNIC_MAXDATAFIELDSIZE_MIN 256 +#define VNIC_FNIC_MAXDATAFIELDSIZE_MAX 2112 + +#define VNIC_FNIC_FLOGI_RETRIES_MIN 0 +#define VNIC_FNIC_FLOGI_RETRIES_MAX 0xffffffff +#define VNIC_FNIC_FLOGI_RETRIES_DEF 0xffffffff + +#define VNIC_FNIC_FLOGI_TIMEOUT_MIN 1000 +#define VNIC_FNIC_FLOGI_TIMEOUT_MAX 255000 + +#define VNIC_FNIC_PLOGI_RETRIES_MIN 0 +#define VNIC_FNIC_PLOGI_RETRIES_MAX 255 +#define VNIC_FNIC_PLOGI_RETRIES_DEF 8 + +#define VNIC_FNIC_PLOGI_TIMEOUT_MIN 1000 +#define VNIC_FNIC_PLOGI_TIMEOUT_MAX 255000 + +#define VNIC_FNIC_IO_THROTTLE_COUNT_MIN 256 +#define VNIC_FNIC_IO_THROTTLE_COUNT_MAX 4096 + +#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MIN 0 +#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX 240000 + +#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MIN 0 +#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX 240000 + +#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MIN 0 +#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX 255 + +#define VNIC_FNIC_LUNS_PER_TARGET_MIN 1 +#define VNIC_FNIC_LUNS_PER_TARGET_MAX 1024 + +/* Device-specific region: scsi configuration */ +struct vnic_fc_config { + u64 node_wwn; + u64 port_wwn; + u32 flags; + u32 wq_enet_desc_count; + u32 wq_copy_desc_count; + u32 rq_desc_count; + u32 flogi_retries; + u32 flogi_timeout; + u32 plogi_retries; + u32 plogi_timeout; + u32 io_throttle_count; + u32 link_down_timeout; + u32 port_down_timeout; + u32 port_down_io_retries; + u32 luns_per_tgt; + u16 maxdatafieldsize; + u16 ed_tov; + u16 ra_tov; + u16 intr_timer; + u8 intr_timer_type; +}; + +#define VFCF_FCP_SEQ_LVL_ERR 0x1 /* Enable FCP-2 Error Recovery */ +#define VFCF_PERBI 0x2 /* persistent binding info available */ + +#endif /* _VNIC_SCSI_H_ */ diff --git a/drivers/scsi/fnic/vnic_stats.h b/drivers/scsi/fnic/vnic_stats.h new file mode 100644 index 000000000000..5372e23c1cb3 --- /dev/null +++ b/drivers/scsi/fnic/vnic_stats.h @@ -0,0 +1,68 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_STATS_H_ +#define _VNIC_STATS_H_ + +/* Tx statistics */ +struct vnic_tx_stats { + u64 tx_frames_ok; + u64 tx_unicast_frames_ok; + u64 tx_multicast_frames_ok; + u64 tx_broadcast_frames_ok; + u64 tx_bytes_ok; + u64 tx_unicast_bytes_ok; + u64 tx_multicast_bytes_ok; + u64 tx_broadcast_bytes_ok; + u64 tx_drops; + u64 tx_errors; + u64 tx_tso; + u64 rsvd[16]; +}; + +/* Rx statistics */ +struct vnic_rx_stats { + u64 rx_frames_ok; + u64 rx_frames_total; + u64 rx_unicast_frames_ok; + u64 rx_multicast_frames_ok; + u64 rx_broadcast_frames_ok; + u64 rx_bytes_ok; + u64 rx_unicast_bytes_ok; + u64 rx_multicast_bytes_ok; + u64 rx_broadcast_bytes_ok; + u64 rx_drop; + u64 rx_no_bufs; + u64 rx_errors; + u64 rx_rss; + u64 rx_crc_errors; + u64 rx_frames_64; + u64 rx_frames_127; + u64 rx_frames_255; + u64 rx_frames_511; + u64 rx_frames_1023; + u64 rx_frames_1518; + u64 rx_frames_to_max; + u64 rsvd[16]; +}; + +struct vnic_stats { + struct vnic_tx_stats tx; + struct vnic_rx_stats rx; +}; + +#endif /* _VNIC_STATS_H_ */ diff --git a/drivers/scsi/fnic/vnic_wq.c b/drivers/scsi/fnic/vnic_wq.c new file mode 100644 index 000000000000..1f9ea790d130 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq.c @@ -0,0 +1,182 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_wq.h" + +static int vnic_wq_alloc_bufs(struct vnic_wq *wq) +{ + struct vnic_wq_buf *buf; + struct vnic_dev *vdev; + unsigned int i, j, count = wq->ring.desc_count; + unsigned int blks = VNIC_WQ_BUF_BLKS_NEEDED(count); + + vdev = wq->vdev; + + for (i = 0; i < blks; i++) { + wq->bufs[i] = kzalloc(VNIC_WQ_BUF_BLK_SZ, GFP_ATOMIC); + if (!wq->bufs[i]) { + printk(KERN_ERR "Failed to alloc wq_bufs\n"); + return -ENOMEM; + } + } + + for (i = 0; i < blks; i++) { + buf = wq->bufs[i]; + for (j = 0; j < VNIC_WQ_BUF_BLK_ENTRIES; j++) { + buf->index = i * VNIC_WQ_BUF_BLK_ENTRIES + j; + buf->desc = (u8 *)wq->ring.descs + + wq->ring.desc_size * buf->index; + if (buf->index + 1 == count) { + buf->next = wq->bufs[0]; + break; + } else if (j + 1 == VNIC_WQ_BUF_BLK_ENTRIES) { + buf->next = wq->bufs[i + 1]; + } else { + buf->next = buf + 1; + buf++; + } + } + } + + wq->to_use = wq->to_clean = wq->bufs[0]; + + return 0; +} + +void vnic_wq_free(struct vnic_wq *wq) +{ + struct vnic_dev *vdev; + unsigned int i; + + vdev = wq->vdev; + + vnic_dev_free_desc_ring(vdev, &wq->ring); + + for (i = 0; i < VNIC_WQ_BUF_BLKS_MAX; i++) { + kfree(wq->bufs[i]); + wq->bufs[i] = NULL; + } + + wq->ctrl = NULL; + +} + +int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + wq->index = index; + wq->vdev = vdev; + + wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index); + if (!wq->ctrl) { + printk(KERN_ERR "Failed to hook WQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_wq_disable(wq); + + err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size); + if (err) + return err; + + err = vnic_wq_alloc_bufs(wq); + if (err) { + vnic_wq_free(wq); + return err; + } + + return 0; +} + +void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + + paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &wq->ctrl->ring_base); + iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size); + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(cq_index, &wq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset); + iowrite32(0, &wq->ctrl->error_status); +} + +unsigned int vnic_wq_error_status(struct vnic_wq *wq) +{ + return ioread32(&wq->ctrl->error_status); +} + +void vnic_wq_enable(struct vnic_wq *wq) +{ + iowrite32(1, &wq->ctrl->enable); +} + +int vnic_wq_disable(struct vnic_wq *wq) +{ + unsigned int wait; + + iowrite32(0, &wq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&wq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable WQ[%d]\n", wq->index); + + return -ETIMEDOUT; +} + +void vnic_wq_clean(struct vnic_wq *wq, + void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf)) +{ + struct vnic_wq_buf *buf; + + BUG_ON(ioread32(&wq->ctrl->enable)); + + buf = wq->to_clean; + + while (vnic_wq_desc_used(wq) > 0) { + + (*buf_clean)(wq, buf); + + buf = wq->to_clean = buf->next; + wq->ring.desc_avail++; + } + + wq->to_use = wq->to_clean = wq->bufs[0]; + + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(0, &wq->ctrl->error_status); + + vnic_dev_clear_desc_ring(&wq->ring); +} diff --git a/drivers/scsi/fnic/vnic_wq.h b/drivers/scsi/fnic/vnic_wq.h new file mode 100644 index 000000000000..5cd094f79281 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq.h @@ -0,0 +1,175 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_WQ_H_ +#define _VNIC_WQ_H_ + +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_wq_desc_avail fnic_wq_desc_avail +#define vnic_wq_desc_used fnic_wq_desc_used +#define vnic_wq_next_desc fni_cwq_next_desc +#define vnic_wq_post fnic_wq_post +#define vnic_wq_service fnic_wq_service +#define vnic_wq_free fnic_wq_free +#define vnic_wq_alloc fnic_wq_alloc +#define vnic_wq_init fnic_wq_init +#define vnic_wq_error_status fnic_wq_error_status +#define vnic_wq_enable fnic_wq_enable +#define vnic_wq_disable fnic_wq_disable +#define vnic_wq_clean fnic_wq_clean + +/* Work queue control */ +struct vnic_wq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 posted_index; /* 0x10 */ + u32 pad1; + u32 cq_index; /* 0x18 */ + u32 pad2; + u32 enable; /* 0x20 */ + u32 pad3; + u32 running; /* 0x28 */ + u32 pad4; + u32 fetch_index; /* 0x30 */ + u32 pad5; + u32 dca_value; /* 0x38 */ + u32 pad6; + u32 error_interrupt_enable; /* 0x40 */ + u32 pad7; + u32 error_interrupt_offset; /* 0x48 */ + u32 pad8; + u32 error_status; /* 0x50 */ + u32 pad9; +}; + +struct vnic_wq_buf { + struct vnic_wq_buf *next; + dma_addr_t dma_addr; + void *os_buf; + unsigned int len; + unsigned int index; + int sop; + void *desc; +}; + +/* Break the vnic_wq_buf allocations into blocks of 64 entries */ +#define VNIC_WQ_BUF_BLK_ENTRIES 64 +#define VNIC_WQ_BUF_BLK_SZ \ + (VNIC_WQ_BUF_BLK_ENTRIES * sizeof(struct vnic_wq_buf)) +#define VNIC_WQ_BUF_BLKS_NEEDED(entries) \ + DIV_ROUND_UP(entries, VNIC_WQ_BUF_BLK_ENTRIES) +#define VNIC_WQ_BUF_BLKS_MAX VNIC_WQ_BUF_BLKS_NEEDED(4096) + +struct vnic_wq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + struct vnic_wq_buf *bufs[VNIC_WQ_BUF_BLKS_MAX]; + struct vnic_wq_buf *to_use; + struct vnic_wq_buf *to_clean; + unsigned int pkts_outstanding; +}; + +static inline unsigned int vnic_wq_desc_avail(struct vnic_wq *wq) +{ + /* how many does SW own? */ + return wq->ring.desc_avail; +} + +static inline unsigned int vnic_wq_desc_used(struct vnic_wq *wq) +{ + /* how many does HW own? */ + return wq->ring.desc_count - wq->ring.desc_avail - 1; +} + +static inline void *vnic_wq_next_desc(struct vnic_wq *wq) +{ + return wq->to_use->desc; +} + +static inline void vnic_wq_post(struct vnic_wq *wq, + void *os_buf, dma_addr_t dma_addr, + unsigned int len, int sop, int eop) +{ + struct vnic_wq_buf *buf = wq->to_use; + + buf->sop = sop; + buf->os_buf = eop ? os_buf : NULL; + buf->dma_addr = dma_addr; + buf->len = len; + + buf = buf->next; + if (eop) { + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + iowrite32(buf->index, &wq->ctrl->posted_index); + } + wq->to_use = buf; + + wq->ring.desc_avail--; +} + +static inline void vnic_wq_service(struct vnic_wq *wq, + struct cq_desc *cq_desc, u16 completed_index, + void (*buf_service)(struct vnic_wq *wq, + struct cq_desc *cq_desc, struct vnic_wq_buf *buf, void *opaque), + void *opaque) +{ + struct vnic_wq_buf *buf; + + buf = wq->to_clean; + while (1) { + + (*buf_service)(wq, cq_desc, buf, opaque); + + wq->ring.desc_avail++; + + wq->to_clean = buf->next; + + if (buf->index == completed_index) + break; + + buf = wq->to_clean; + } +} + +void vnic_wq_free(struct vnic_wq *wq); +int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +unsigned int vnic_wq_error_status(struct vnic_wq *wq); +void vnic_wq_enable(struct vnic_wq *wq); +int vnic_wq_disable(struct vnic_wq *wq); +void vnic_wq_clean(struct vnic_wq *wq, + void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf)); + +#endif /* _VNIC_WQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_wq_copy.c b/drivers/scsi/fnic/vnic_wq_copy.c new file mode 100644 index 000000000000..9eab7e7caf38 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq_copy.c @@ -0,0 +1,117 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_wq_copy.h" + +void vnic_wq_copy_enable(struct vnic_wq_copy *wq) +{ + iowrite32(1, &wq->ctrl->enable); +} + +int vnic_wq_copy_disable(struct vnic_wq_copy *wq) +{ + unsigned int wait; + + iowrite32(0, &wq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&wq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable Copy WQ[%d]," + " fetch index=%d, posted_index=%d\n", + wq->index, ioread32(&wq->ctrl->fetch_index), + ioread32(&wq->ctrl->posted_index)); + + return -ENODEV; +} + +void vnic_wq_copy_clean(struct vnic_wq_copy *wq, + void (*q_clean)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)) +{ + BUG_ON(ioread32(&wq->ctrl->enable)); + + if (vnic_wq_copy_desc_in_use(wq)) + vnic_wq_copy_service(wq, -1, q_clean); + + wq->to_use_index = wq->to_clean_index = 0; + + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(0, &wq->ctrl->error_status); + + vnic_dev_clear_desc_ring(&wq->ring); +} + +void vnic_wq_copy_free(struct vnic_wq_copy *wq) +{ + struct vnic_dev *vdev; + + vdev = wq->vdev; + vnic_dev_free_desc_ring(vdev, &wq->ring); + wq->ctrl = NULL; +} + +int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq, + unsigned int index, unsigned int desc_count, + unsigned int desc_size) +{ + int err; + + wq->index = index; + wq->vdev = vdev; + wq->to_use_index = wq->to_clean_index = 0; + wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index); + if (!wq->ctrl) { + printk(KERN_ERR "Failed to hook COPY WQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_wq_copy_disable(wq); + + err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size); + if (err) + return err; + + return 0; +} + +void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + + paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &wq->ctrl->ring_base); + iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size); + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(cq_index, &wq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset); +} + diff --git a/drivers/scsi/fnic/vnic_wq_copy.h b/drivers/scsi/fnic/vnic_wq_copy.h new file mode 100644 index 000000000000..6aff9740c3df --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq_copy.h @@ -0,0 +1,128 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_WQ_COPY_H_ +#define _VNIC_WQ_COPY_H_ + +#include +#include "vnic_wq.h" +#include "fcpio.h" + +#define VNIC_WQ_COPY_MAX 1 + +struct vnic_wq_copy { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + unsigned to_use_index; + unsigned to_clean_index; +}; + +static inline unsigned int vnic_wq_copy_desc_avail(struct vnic_wq_copy *wq) +{ + return wq->ring.desc_avail; +} + +static inline unsigned int vnic_wq_copy_desc_in_use(struct vnic_wq_copy *wq) +{ + return wq->ring.desc_count - 1 - wq->ring.desc_avail; +} + +static inline void *vnic_wq_copy_next_desc(struct vnic_wq_copy *wq) +{ + struct fcpio_host_req *desc = wq->ring.descs; + return &desc[wq->to_use_index]; +} + +static inline void vnic_wq_copy_post(struct vnic_wq_copy *wq) +{ + + ((wq->to_use_index + 1) == wq->ring.desc_count) ? + (wq->to_use_index = 0) : (wq->to_use_index++); + wq->ring.desc_avail--; + + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + + iowrite32(wq->to_use_index, &wq->ctrl->posted_index); +} + +static inline void vnic_wq_copy_desc_process(struct vnic_wq_copy *wq, u16 index) +{ + unsigned int cnt; + + if (wq->to_clean_index <= index) + cnt = (index - wq->to_clean_index) + 1; + else + cnt = wq->ring.desc_count - wq->to_clean_index + index + 1; + + wq->to_clean_index = ((index + 1) % wq->ring.desc_count); + wq->ring.desc_avail += cnt; + +} + +static inline void vnic_wq_copy_service(struct vnic_wq_copy *wq, + u16 completed_index, + void (*q_service)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)) +{ + struct fcpio_host_req *wq_desc = wq->ring.descs; + unsigned int curr_index; + + while (1) { + + if (q_service) + (*q_service)(wq, &wq_desc[wq->to_clean_index]); + + wq->ring.desc_avail++; + + curr_index = wq->to_clean_index; + + /* increment the to-clean index so that we start + * with an unprocessed index next time we enter the loop + */ + ((wq->to_clean_index + 1) == wq->ring.desc_count) ? + (wq->to_clean_index = 0) : (wq->to_clean_index++); + + if (curr_index == completed_index) + break; + + /* we have cleaned all the entries */ + if ((completed_index == (u16)-1) && + (wq->to_clean_index == wq->to_use_index)) + break; + } +} + +void vnic_wq_copy_enable(struct vnic_wq_copy *wq); +int vnic_wq_copy_disable(struct vnic_wq_copy *wq); +void vnic_wq_copy_free(struct vnic_wq_copy *wq); +int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq, + unsigned int index, unsigned int desc_count, unsigned int desc_size); +void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +void vnic_wq_copy_clean(struct vnic_wq_copy *wq, + void (*q_clean)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)); + +#endif /* _VNIC_WQ_COPY_H_ */ diff --git a/drivers/scsi/fnic/wq_enet_desc.h b/drivers/scsi/fnic/wq_enet_desc.h new file mode 100644 index 000000000000..b121cbad18b8 --- /dev/null +++ b/drivers/scsi/fnic/wq_enet_desc.h @@ -0,0 +1,96 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _WQ_ENET_DESC_H_ +#define _WQ_ENET_DESC_H_ + +/* Ethernet work queue descriptor: 16B */ +struct wq_enet_desc { + __le64 address; + __le16 length; + __le16 mss_loopback; + __le16 header_length_flags; + __le16 vlan_tag; +}; + +#define WQ_ENET_ADDR_BITS 64 +#define WQ_ENET_LEN_BITS 14 +#define WQ_ENET_LEN_MASK ((1 << WQ_ENET_LEN_BITS) - 1) +#define WQ_ENET_MSS_BITS 14 +#define WQ_ENET_MSS_MASK ((1 << WQ_ENET_MSS_BITS) - 1) +#define WQ_ENET_MSS_SHIFT 2 +#define WQ_ENET_LOOPBACK_SHIFT 1 +#define WQ_ENET_HDRLEN_BITS 10 +#define WQ_ENET_HDRLEN_MASK ((1 << WQ_ENET_HDRLEN_BITS) - 1) +#define WQ_ENET_FLAGS_OM_BITS 2 +#define WQ_ENET_FLAGS_OM_MASK ((1 << WQ_ENET_FLAGS_OM_BITS) - 1) +#define WQ_ENET_FLAGS_EOP_SHIFT 12 +#define WQ_ENET_FLAGS_CQ_ENTRY_SHIFT 13 +#define WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT 14 +#define WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT 15 + +#define WQ_ENET_OFFLOAD_MODE_CSUM 0 +#define WQ_ENET_OFFLOAD_MODE_RESERVED 1 +#define WQ_ENET_OFFLOAD_MODE_CSUM_L4 2 +#define WQ_ENET_OFFLOAD_MODE_TSO 3 + +static inline void wq_enet_desc_enc(struct wq_enet_desc *desc, + u64 address, u16 length, u16 mss, u16 header_length, + u8 offload_mode, u8 eop, u8 cq_entry, u8 fcoe_encap, + u8 vlan_tag_insert, u16 vlan_tag, u8 loopback) +{ + desc->address = cpu_to_le64(address); + desc->length = cpu_to_le16(length & WQ_ENET_LEN_MASK); + desc->mss_loopback = cpu_to_le16((mss & WQ_ENET_MSS_MASK) << + WQ_ENET_MSS_SHIFT | (loopback & 1) << WQ_ENET_LOOPBACK_SHIFT); + desc->header_length_flags = cpu_to_le16( + (header_length & WQ_ENET_HDRLEN_MASK) | + (offload_mode & WQ_ENET_FLAGS_OM_MASK) << WQ_ENET_HDRLEN_BITS | + (eop & 1) << WQ_ENET_FLAGS_EOP_SHIFT | + (cq_entry & 1) << WQ_ENET_FLAGS_CQ_ENTRY_SHIFT | + (fcoe_encap & 1) << WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT | + (vlan_tag_insert & 1) << WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT); + desc->vlan_tag = cpu_to_le16(vlan_tag); +} + +static inline void wq_enet_desc_dec(struct wq_enet_desc *desc, + u64 *address, u16 *length, u16 *mss, u16 *header_length, + u8 *offload_mode, u8 *eop, u8 *cq_entry, u8 *fcoe_encap, + u8 *vlan_tag_insert, u16 *vlan_tag, u8 *loopback) +{ + *address = le64_to_cpu(desc->address); + *length = le16_to_cpu(desc->length) & WQ_ENET_LEN_MASK; + *mss = (le16_to_cpu(desc->mss_loopback) >> WQ_ENET_MSS_SHIFT) & + WQ_ENET_MSS_MASK; + *loopback = (u8)((le16_to_cpu(desc->mss_loopback) >> + WQ_ENET_LOOPBACK_SHIFT) & 1); + *header_length = le16_to_cpu(desc->header_length_flags) & + WQ_ENET_HDRLEN_MASK; + *offload_mode = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_HDRLEN_BITS) & WQ_ENET_FLAGS_OM_MASK); + *eop = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_EOP_SHIFT) & 1); + *cq_entry = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_CQ_ENTRY_SHIFT) & 1); + *fcoe_encap = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT) & 1); + *vlan_tag_insert = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT) & 1); + *vlan_tag = le16_to_cpu(desc->vlan_tag); +} + +#endif /* _WQ_ENET_DESC_H_ */ From 1b1cc7f21c51cc81992a547b59e174dd8c44d1bd Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 13 May 2009 20:44:07 +0200 Subject: [PATCH 203/670] ALSA: riptide: postfix increment and off by one With a postfix increment these variables are incremented beyond CMDIF_TIMEOUT / MAX_WRITE_RETRY. Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Takashi Iwai --- sound/pci/riptide/riptide.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c index 6f1034417a02..e51a5ef1954d 100644 --- a/sound/pci/riptide/riptide.c +++ b/sound/pci/riptide/riptide.c @@ -889,7 +889,7 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm, spin_lock_irqsave(&cif->lock, irqflags); while (i++ < CMDIF_TIMEOUT && !IS_READY(cif->hwport)) udelay(10); - if (i >= CMDIF_TIMEOUT) { + if (i > CMDIF_TIMEOUT) { err = -EBUSY; goto errout; } @@ -907,8 +907,10 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm, WRITE_PORT_ULONG(cmdport->data1, cmd); /* write cmd */ if ((flags & RESP) && ret) { while (!IS_DATF(cmdport) && - time++ < CMDIF_TIMEOUT) + time < CMDIF_TIMEOUT) { udelay(10); + time++; + } if (time < CMDIF_TIMEOUT) { /* read response */ ret->retlongs[0] = READ_PORT_ULONG(cmdport->data1); @@ -1454,7 +1456,7 @@ static int snd_riptide_trigger(struct snd_pcm_substream *substream, int cmd) SEND_GPOS(cif, 0, data->id, &rptr); udelay(1); } while (i != rptr.retlongs[1] && j++ < MAX_WRITE_RETRY); - if (j >= MAX_WRITE_RETRY) + if (j > MAX_WRITE_RETRY) snd_printk(KERN_ERR "Riptide: Could not stop stream!"); break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: @@ -1783,7 +1785,7 @@ snd_riptide_codec_write(struct snd_ac97 *ac97, unsigned short reg, SEND_SACR(cif, val, reg); SEND_RACR(cif, reg, &rptr); } while (rptr.retwords[1] != val && i++ < MAX_WRITE_RETRY); - if (i == MAX_WRITE_RETRY) + if (i > MAX_WRITE_RETRY) snd_printdd("Write AC97 reg failed\n"); } From c34e6e8bdd99c746b7844c937c3a2529ef2c4437 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 31 Mar 2009 12:59:24 +0200 Subject: [PATCH 204/670] MIPS: SMTC: Bring set/clear/change_c0_## return value semantics uptodate. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 526f327475ce..1f7987793782 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1484,14 +1484,15 @@ static inline unsigned int \ set_c0_##name(unsigned int set) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ res = read_c0_##name(); \ - res |= set; \ - write_c0_##name(res); \ + new = res | set; \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ @@ -1502,14 +1503,15 @@ static inline unsigned int \ clear_c0_##name(unsigned int clear) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ local_irq_save(flags); \ omt = __dmt(); \ res = read_c0_##name(); \ - res &= ~clear; \ - write_c0_##name(res); \ + new = res & ~clear; \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ @@ -1517,9 +1519,10 @@ clear_c0_##name(unsigned int clear) \ } \ \ static inline unsigned int \ -change_c0_##name(unsigned int change, unsigned int new) \ +change_c0_##name(unsigned int change, unsigned int newbits) \ { \ unsigned int res; \ + unsigned int new; \ unsigned int omt; \ unsigned long flags; \ \ @@ -1527,9 +1530,9 @@ change_c0_##name(unsigned int change, unsigned int new) \ \ omt = __dmt(); \ res = read_c0_##name(); \ - res &= ~change; \ - res |= (new & change); \ - write_c0_##name(res); \ + new = res & ~change; \ + new |= (newbits & change); \ + write_c0_##name(new); \ __emt(omt); \ local_irq_restore(flags); \ \ From bcf11801e77946533767bbb368130220e241d824 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 31 Mar 2009 13:10:32 +0200 Subject: [PATCH 205/670] MIPS: SMTC: Fix xxx_clockevent_init() naming conflict for SMTC Commit 779e7d41ad004946603da139da99ba775f74cb1c created a name collision in SMTC builds. The attached patch corrects this in a a not-too-terribly-ugly manner. Note that the SMTC case has to come first, because CEVT_R4K will also be true. Signed-off-by: Kevin D. Kissell Signed-off-by: Ralf Baechle --- arch/mips/include/asm/time.h | 6 +++++- arch/mips/kernel/cevt-smtc.c | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index 38a30d2ee959..e46f23f54a50 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -57,7 +57,11 @@ extern int r4k_clockevent_init(void); static inline int mips_clockevent_init(void) { -#ifdef CONFIG_CEVT_R4K +#ifdef CONFIG_MIPS_MT_SMTC + extern int smtc_clockevent_init(void); + + return smtc_clockevent_init(); +#elif CONFIG_CEVT_R4K return r4k_clockevent_init(); #else return -ENXIO; diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c index 6d45e24db5bf..df6f5bc60572 100644 --- a/arch/mips/kernel/cevt-smtc.c +++ b/arch/mips/kernel/cevt-smtc.c @@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id) } -int __cpuinit mips_clockevent_init(void) +int __cpuinit smtc_clockevent_init(void) { uint64_t mips_freq = mips_hpt_frequency; unsigned int cpu = smp_processor_id(); From b7863ee144a99ff54fee90d851e24d73f38af661 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 31 Mar 2009 18:51:27 +0200 Subject: [PATCH 206/670] MIPS: Alchemy: Fix AU1100 interrupt numbers off-by-one Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/au1000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 62f91f50b5b5..87a16598ebc3 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -715,7 +715,7 @@ enum soc_au1500_ints { #ifdef CONFIG_SOC_AU1100 enum soc_au1100_ints { AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1100_UART0_INT, + AU1100_UART0_INT = AU1100_FIRST_INT, AU1100_UART1_INT, AU1100_SD_INT, AU1100_UART3_INT, From d16797b304a4701a7d156f47773c6d2e456b64ee Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 31 Mar 2009 18:51:28 +0200 Subject: [PATCH 207/670] MIPS: Alchemy: Add missing Au1200 GPIO203 interrupt Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/au1000.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 87a16598ebc3..854e95f1b07c 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -902,8 +902,8 @@ enum soc_au1200_ints { AU1000_RTC_MATCH0_INT, AU1000_RTC_MATCH1_INT, AU1000_RTC_MATCH2_INT, - - AU1200_NAND_INT = AU1200_FIRST_INT + 23, + AU1200_GPIO_203, + AU1200_NAND_INT, AU1200_GPIO_204, AU1200_GPIO_205, AU1200_GPIO_206, From 1d9c114dc1702306215439cd608047ab639700db Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 31 Mar 2009 18:44:36 +0200 Subject: [PATCH 208/670] MIPS: au1xxx-ide: Fix build with CONFIG_PM au1xxx_power_dev_t? is never defined; get rid of all PM stuff as well since it is not in the driver source anyway. Signed-off-by: Manuel Lauss Acked-by: Sergei Shtylyov Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/au1xxx_ide.h | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h index 60638b8969ba..5656c72de6d3 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h @@ -46,20 +46,6 @@ #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 #endif -#ifdef CONFIG_PM -/* - * This will enable the device to be powered up when write() or read() - * is called. If this is not defined, the driver will return -EBUSY. - */ -#define WAKE_ON_ACCESS 1 - -typedef struct { - spinlock_t lock; /* Used to block on state transitions */ - au1xxx_power_dev_t *dev; /* Power Managers device structure */ - unsigned stopped; /* Used to signal device is stopped */ -} pm_state; -#endif - typedef struct { u32 tx_dev_id, rx_dev_id, target_dev_id; u32 tx_chan, rx_chan; @@ -72,9 +58,6 @@ typedef struct { #endif int irq; u32 regbase; -#ifdef CONFIG_PM - pm_state pm; -#endif } _auide_hwif; /******************************************************************************/ From 1291417eb61d1cd3fc69e295c2e9b83c5f6a8ff9 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 30 Mar 2009 22:53:23 +0300 Subject: [PATCH 209/670] MIPS: IP32: Two symbols can become static The file arch/mips/mm/sc-rm7k.c needlessly defines two global symbols: rm7k_sc_ops rm7k_tcache_enabled This patch makes these symbols static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mm/sc-rm7k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c index e3abfb2d7e86..de69bfbf506e 100644 --- a/arch/mips/mm/sc-rm7k.c +++ b/arch/mips/mm/sc-rm7k.c @@ -29,7 +29,7 @@ extern unsigned long icache_way_size, dcache_way_size; #include -int rm7k_tcache_enabled; +static int rm7k_tcache_enabled; /* * Writeback and invalidate the primary cache dcache before DMA. @@ -121,7 +121,7 @@ static void rm7k_sc_disable(void) clear_c0_config(RM7K_CONF_SE); } -struct bcache_ops rm7k_sc_ops = { +static struct bcache_ops rm7k_sc_ops = { .bc_enable = rm7k_sc_enable, .bc_disable = rm7k_sc_disable, .bc_wback_inv = rm7k_sc_wback_inv, From 36a09d7848abf017ea11ea949372f46edc1350da Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 30 Mar 2009 22:53:24 +0300 Subject: [PATCH 210/670] MIPS: IP32: ip32_be_handler symbol is needlessly defined global The file arch/mips/sgi-ip32/ip32-berr.c needlessly defines the function ip32_be_handler() as global, and this patch makes it static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-berr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c index a278e918a019..afc1cadbba37 100644 --- a/arch/mips/sgi-ip32/ip32-berr.c +++ b/arch/mips/sgi-ip32/ip32-berr.c @@ -16,7 +16,7 @@ #include #include -int ip32_be_handler(struct pt_regs *regs, int is_fixup) +static int ip32_be_handler(struct pt_regs *regs, int is_fixup) { int data = regs->cp0_cause & 4; From ae5373874a393d36d0fbc1a21c1b81e52736a4f2 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 30 Mar 2009 22:53:25 +0300 Subject: [PATCH 211/670] MIPS: IP32: Fix needlessly global symbols in arch/mips/sgi-ip32/ip32-irq.c The following symbols are needlessly defined global: cpuerr_irq and memerr_irq. This patch makes the symbols static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-irq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 83a0b3c359da..5c2bf111ca67 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -112,13 +112,13 @@ static void inline flush_mace_bus(void) extern irqreturn_t crime_memerr_intr(int irq, void *dev_id); extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id); -struct irqaction memerr_irq = { +static struct irqaction memerr_irq = { .handler = crime_memerr_intr, .flags = IRQF_DISABLED, .name = "CRIME memory error", }; -struct irqaction cpuerr_irq = { +static struct irqaction cpuerr_irq = { .handler = crime_cpuerr_intr, .flags = IRQF_DISABLED, .name = "CRIME CPU error", From b6d57ae97af3c38d28f066b5e47b7d58e468728a Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Mon, 30 Mar 2009 22:53:26 +0300 Subject: [PATCH 212/670] MIPS: gbe: Make needlessly global symbols static in drivers/video/gbefb.c The following symbols are needlessly defined global: default_mode default_var gbe_mem_phys gbe_turn_off gbefb_exit gbefb_init gbefb_setup This error was noticed by namespacecheck when compiling ip32_defconfig. This patch makes the symbols static. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- drivers/video/gbefb.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index fe5b519860b1..1a83709f9611 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -75,7 +75,7 @@ struct gbefb_par { static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024; static void *gbe_mem; static dma_addr_t gbe_dma_addr; -unsigned long gbe_mem_phys; +static unsigned long gbe_mem_phys; static struct { uint16_t *cpu; @@ -185,8 +185,8 @@ static struct fb_videomode default_mode_LCD __initdata = { .vmode = FB_VMODE_NONINTERLACED, }; -struct fb_videomode *default_mode __initdata = &default_mode_CRT; -struct fb_var_screeninfo *default_var __initdata = &default_var_CRT; +static struct fb_videomode *default_mode __initdata = &default_mode_CRT; +static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT; static int flat_panel_enabled = 0; @@ -205,7 +205,7 @@ static void gbe_reset(void) * console. */ -void gbe_turn_off(void) +static void gbe_turn_off(void) { int i; unsigned int val, x, y, vpixen_off; @@ -1097,7 +1097,7 @@ static void gbefb_create_sysfs(struct device *dev) * Initialization */ -int __init gbefb_setup(char *options) +static int __init gbefb_setup(char *options) { char *this_opt; @@ -1283,7 +1283,7 @@ static struct platform_driver gbefb_driver = { static struct platform_device *gbefb_device; -int __init gbefb_init(void) +static int __init gbefb_init(void) { int ret = platform_driver_register(&gbefb_driver); if (!ret) { @@ -1301,7 +1301,7 @@ int __init gbefb_init(void) return ret; } -void __exit gbefb_exit(void) +static void __exit gbefb_exit(void) { platform_device_unregister(gbefb_device); platform_driver_unregister(&gbefb_driver); From 7fc7316aa82fb3874f69689bd36134afea9c8bfd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 1 Apr 2009 16:11:53 +0200 Subject: [PATCH 213/670] MIPS: Print the actual detected I-cache associativity on bootup. Signed-off-by: Ralf Baechle --- arch/mips/mm/c-r4k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 58d9075e86fe..171951d2305b 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1041,7 +1041,7 @@ static void __cpuinit probe_pcache(void) printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n", icache_size >> 10, - cpu_has_vtag_icache ? "VIVT" : "VIPT", + c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT", way_string[c->icache.ways], c->icache.linesz); printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n", From a575b8453944c5911a2a6f51d0096fffba82dd48 Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Thu, 2 Apr 2009 15:41:45 +0800 Subject: [PATCH 214/670] MIPS: Add Loongson cpu-feature-overrides.h I have taken Wu Zhangjin's and Philippe Vachon's version as references, did a little modification and tested on 16K page size kernel. It works well. Unfornately although it already has defined cpu_has_dc_aliases as 1, 4k page size still not working. More work needed here. Signed-off-by: Zhang Le Signed-off-by: Ralf Baechle --- .../asm/mach-lemote/cpu-feature-overrides.h | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h new file mode 100644 index 000000000000..550a10dc9dba --- /dev/null +++ b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h @@ -0,0 +1,59 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wu Zhangjin + * Copyright (C) 2009 Philippe Vachon + * Copyright (C) 2009 Zhang Le + * + * reference: /proc/cpuinfo, + * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy), + * arch/mips/kernel/proc.c(show_cpuinfo), + * loongson2f user manual. + */ + +#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + + +#define cpu_has_32fpr 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_4kex 1 +#define cpu_has_64bits 1 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_counter 1 +#define cpu_has_dc_aliases 1 +#define cpu_has_divec 0 +#define cpu_has_dsp 0 +#define cpu_has_ejtag 0 +#define cpu_has_fpu 1 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_inclusive_pcaches 1 +#define cpu_has_llsc 1 +#define cpu_has_mcheck 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips16 0 +#define cpu_has_mips32r1 0 +#define cpu_has_mips32r2 0 +#define cpu_has_mips3d 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 +#define cpu_has_mipsmt 0 +#define cpu_has_prefetch 0 +#define cpu_has_smartmips 0 +#define cpu_has_tlb 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_userlocal 0 +#define cpu_has_vce 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_watch 1 +#define cpu_icache_snoops_remote_store 1 + +#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */ From 592e527f5b7c17e9be8fc58a63c3f918827b4b92 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 6 Apr 2009 00:31:22 +0200 Subject: [PATCH 215/670] MIPS: Fix build error if CONFIG_CEVT_R4K is undefined. Introduced by 99aa5029937ee926e3b249369e208d7013cd381b. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/time.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h index e46f23f54a50..df6a430de5eb 100644 --- a/arch/mips/include/asm/time.h +++ b/arch/mips/include/asm/time.h @@ -61,7 +61,7 @@ static inline int mips_clockevent_init(void) extern int smtc_clockevent_init(void); return smtc_clockevent_init(); -#elif CONFIG_CEVT_R4K +#elif defined(CONFIG_CEVT_R4K) return r4k_clockevent_init(); #else return -ENXIO; From c7d16736b8759f45a49d318bf3a8ca7fed7b6962 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 16 Apr 2009 09:20:17 -0700 Subject: [PATCH 216/670] MIPS: Compat: Use generic 32-bit wrapers for sys_timerfd_{g,s}ettime The LTP timerfd01 test is failing (blocking forever) on the 32-bit ABIs. We need to use the compat_* wrappers for these system calls. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-n32.S | 4 ++-- arch/mips/kernel/scall64-o32.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index c2c16ef9218f..93cc672f4522 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -405,8 +405,8 @@ EXPORT(sysn32_call_table) PTR sys_eventfd PTR sys_fallocate PTR sys_timerfd_create - PTR sys_timerfd_gettime /* 5285 */ - PTR sys_timerfd_settime + PTR compat_sys_timerfd_gettime /* 5285 */ + PTR compat_sys_timerfd_settime PTR sys_signalfd4 PTR sys_eventfd2 PTR sys_epoll_create1 diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 002fac27021e..a5598b2339dd 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -525,8 +525,8 @@ sys_call_table: PTR sys_eventfd PTR sys32_fallocate /* 4320 */ PTR sys_timerfd_create - PTR sys_timerfd_gettime - PTR sys_timerfd_settime + PTR compat_sys_timerfd_gettime + PTR compat_sys_timerfd_settime PTR compat_sys_signalfd4 PTR sys_eventfd2 /* 4325 */ PTR sys_epoll_create1 From dfe99b9c4ef62fa6ea20fa06b6f5c9819039c52d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 16 Apr 2009 02:22:21 +0900 Subject: [PATCH 217/670] MIPS: RBTX4939: Fix typo in system name Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4939/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c index 011e1e332f47..4199c6fd4d1d 100644 --- a/arch/mips/txx9/rbtx4939/setup.c +++ b/arch/mips/txx9/rbtx4939/setup.c @@ -536,7 +536,7 @@ static void __init rbtx4939_setup(void) } struct txx9_board_vec rbtx4939_vec __initdata = { - .system = "Tothiba RBTX4939", + .system = "Toshiba RBTX4939", .prom_init = rbtx4939_prom_init, .mem_setup = rbtx4939_setup, .irq_setup = rbtx4939_irq_setup, From 6cec2a0ac57d2ebef495a46d7866ae86e8d0e508 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sat, 11 Apr 2009 23:31:50 +0900 Subject: [PATCH 218/670] MIPS: Do not include seccomp.h from compat.h The compat.h does not need seccomp.h since TIF_32BIT was moved to thread_info.h This fixes a build error of 64-bit kernel without CONFIG_SECCOMP. Signed-off-by: Atsushi Nemoto Acked-by: : David Daney Signed-off-by: Ralf Baechle --- arch/mips/include/asm/compat.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h index 6c5b40905dd6..f58aed354bfd 100644 --- a/arch/mips/include/asm/compat.h +++ b/arch/mips/include/asm/compat.h @@ -3,7 +3,6 @@ /* * Architecture specific compatibility types */ -#include #include #include #include From 5d57c31e5790d44905af0459a21086dbad167d26 Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Wed, 15 Apr 2009 17:01:52 +0800 Subject: [PATCH 219/670] MIPS: Loongson 2 needs no hazard barriers. Quoting from Loongson2FUserGuide.pdf: 5.22.1 Hazards The processor detects most of the pipeline hazards in hardware, including CP0 hazards and load hazards. No NOP instructions are required to correct instruction sequences. Signed-off-by: Zhang Le Signed-off-by: Ralf Baechle --- arch/mips/include/asm/hazards.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index a12d971db4f9..0eaf77ffbc4f 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -138,8 +138,9 @@ do { \ __instruction_hazard(); \ } while (0) -#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ - defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY) +#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ + defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \ + defined(CONFIG_CPU_R5500) /* * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. From 47740eb887796608fb4c629aa6b8507a2fb6c0eb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sun, 19 Apr 2009 03:21:22 +0200 Subject: [PATCH 220/670] MIPS: Enable CLO / CLZ instructions via separate CPU property This is useful for IDT RC32332, RC32334 and NEC VR5500 processors which do not implement the full MIPS32 / MIPS64 architecture. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/bitops.h | 4 ++-- arch/mips/include/asm/cpu-features.h | 9 +++++++++ 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index bac4a960b24c..b1e9e97a9c78 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word) int num; if (BITS_PER_LONG == 32 && - __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) { + __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) { __asm__( " .set push \n" " .set mips32 \n" @@ -644,7 +644,7 @@ static inline int fls(int x) { int r; - if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) { + if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) { __asm__("clz %0, %1" : "=r" (x) : "r" (x)); return 32 - x; diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index a0d14f85b781..c0047f861337 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -147,6 +147,15 @@ #define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \ cpu_has_mips64r1 | cpu_has_mips64r2) +/* + * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other + * pre-MIPS32/MIPS53 processors have CLO, CLZ. For 64-bit kernels + * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ. + */ +# ifndef cpu_has_clo_clz +# define cpu_has_clo_clz cpu_has_mips_r +# endif + #ifndef cpu_has_dsp #define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP) #endif From 4f29c057aa81c5440f06b716f768ba9f8a041fe9 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 23 Jan 2009 00:42:11 +0900 Subject: [PATCH 221/670] MIPS: Synchronize dma_map_page and dma_map_single Synchronize dma_map_page/dma_unmap_page and dma_map_single/dma_unmap_single. This will reduce unnecessary writebacks and invalidates. [Ralf: make dma_unmap_page an inline function.] Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/include/asm/dma-mapping.h | 9 +++++++-- arch/mips/mm/dma-default.c | 19 +------------------ 2 files changed, 8 insertions(+), 20 deletions(-) diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index c64afb40cd06..d16afddb09a9 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction); extern dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction direction); + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction) +{ + dma_unmap_single(dev, dma_address, size, direction); +} + extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, enum dma_data_direction direction); extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index bed56f1ac837..4fdb7f5216b9 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -209,7 +209,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long addr; addr = (unsigned long) page_address(page) + offset; - dma_cache_wback_inv(addr, size); + __dma_sync(addr, size, direction); } return plat_map_dma_mem_page(dev, page) + offset; @@ -217,23 +217,6 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page, EXPORT_SYMBOL(dma_map_page); -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) { - unsigned long addr; - - addr = dma_addr_to_virt(dma_address); - dma_cache_wback_inv(addr, size); - } - - plat_unmap_dma_mem(dev, dma_address); -} - -EXPORT_SYMBOL(dma_unmap_page); - void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, enum dma_data_direction direction) { From 740ebe4a54fae1705705ec87ce511b16ffb50659 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 3 Apr 2009 01:01:21 +0900 Subject: [PATCH 222/670] MIPS: TXx9: Fix possible overflow in clock calculations Addition of -fwrapv option in 2.6.29 discloses possible overflow with signed arithmetics. For example, result of "a * 6 / 12" (int a = 400000000) is 200000000 without -fwrapv but -157913941 with -fwrapv. Change some variable to unsigned to avoid such overflows. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup_tx4927.c | 2 +- arch/mips/txx9/generic/setup_tx4938.c | 2 +- arch/mips/txx9/generic/setup_tx4939.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c index 914e93c62639..1093549df1a8 100644 --- a/arch/mips/txx9/generic/setup_tx4927.c +++ b/arch/mips/txx9/generic/setup_tx4927.c @@ -88,7 +88,7 @@ void __init tx4927_setup(void) { int i; __u32 divmode; - int cpuclk = 0; + unsigned int cpuclk = 0; u64 ccfg; txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE, diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c index f0844f891f0b..3925219b8973 100644 --- a/arch/mips/txx9/generic/setup_tx4938.c +++ b/arch/mips/txx9/generic/setup_tx4938.c @@ -93,7 +93,7 @@ void __init tx4938_setup(void) { int i; __u32 divmode; - int cpuclk = 0; + unsigned int cpuclk = 0; u64 ccfg; txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE, diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c index 7a25b573e9b0..c2bf150c8838 100644 --- a/arch/mips/txx9/generic/setup_tx4939.c +++ b/arch/mips/txx9/generic/setup_tx4939.c @@ -114,7 +114,7 @@ void __init tx4939_setup(void) int i; __u32 divmode; __u64 pcfg; - int cpuclk = 0; + unsigned int cpuclk = 0; txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE, TX4939_REG_SIZE); From c52399bece85cd4b157dd772e9f20551f9f18d2f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 2 Apr 2009 14:07:10 +0200 Subject: [PATCH 223/670] MIPS: Cavium: Add support for 8k and 32k page sizes. Beyond the requirements of the architecture standard Cavium also supports 8k and 32k pages. Signed-off-by: Ralf Baechle Acked-by: David Daney --- arch/mips/Kconfig | 16 ++++++++++++---- arch/mips/include/asm/mipsregs.h | 11 +++++++++++ arch/mips/include/asm/page.h | 3 +++ arch/mips/include/asm/pgtable-64.h | 6 ++++++ arch/mips/include/asm/thread_info.h | 3 +++ arch/mips/lib/dump_tlb.c | 9 +++++++++ 6 files changed, 44 insertions(+), 4 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 998e5db8cc0f..023aa2d46503 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB config PAGE_SIZE_8KB bool "8kB" - depends on EXPERIMENTAL && CPU_R8000 + depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON help Using 8kB page size will result in higher performance kernel at the price of higher memory consumption. This option is available - only on the R8000 processor. Not that at the time of this writing - this option is still high experimental; there are also issues with - compatibility of user applications. + only on R8000 and cnMIPS processors. Note that you will need a + suitable Linux distribution to support this. config PAGE_SIZE_16KB bool "16kB" @@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB all non-R3000 family processors. Note that you will need a suitable Linux distribution to support this. +config PAGE_SIZE_32KB + bool "32kB" + depends on CPU_CAVIUM_OCTEON + help + Using 32kB page size will result in higher performance kernel at + the price of higher memory consumption. This option is available + only on cnMIPS cores. Note that you will need a suitable Linux + distribution to support this. + config PAGE_SIZE_64KB bool "64kB" depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 1f7987793782..0ef30c81fea6 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -184,12 +184,19 @@ #else #define PM_4K 0x00000000 +#define PM_8K 0x00002000 #define PM_16K 0x00006000 +#define PM_32K 0x0000e000 #define PM_64K 0x0001e000 +#define PM_128K 0x0003e000 #define PM_256K 0x0007e000 +#define PM_512K 0x000fe000 #define PM_1M 0x001fe000 +#define PM_2M 0x003fe000 #define PM_4M 0x007fe000 +#define PM_8M 0x00ffe000 #define PM_16M 0x01ffe000 +#define PM_32M 0x03ffe000 #define PM_64M 0x07ffe000 #define PM_256M 0x1fffe000 #define PM_1G 0x7fffe000 @@ -201,8 +208,12 @@ */ #ifdef CONFIG_PAGE_SIZE_4KB #define PM_DEFAULT_MASK PM_4K +#elif defined(CONFIG_PAGE_SIZE_8KB) +#define PM_DEFAULT_MASK PM_8K #elif defined(CONFIG_PAGE_SIZE_16KB) #define PM_DEFAULT_MASK PM_16K +#elif defined(CONFIG_PAGE_SIZE_32KB) +#define PM_DEFAULT_MASK PM_32K #elif defined(CONFIG_PAGE_SIZE_64KB) #define PM_DEFAULT_MASK PM_64K #else diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index fe7a88ea066e..9f946e4ca057 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -23,6 +23,9 @@ #ifdef CONFIG_PAGE_SIZE_16KB #define PAGE_SHIFT 14 #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define PAGE_SHIFT 15 +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define PAGE_SHIFT 16 #endif diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 943515f0ef87..4ed9d1bba2ba 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -83,6 +83,12 @@ #define PMD_ORDER 0 #define PTE_ORDER 0 #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define PGD_ORDER 0 +#define PUD_ORDER aieeee_attempt_to_allocate_pud +#define PMD_ORDER 0 +#define PTE_ORDER 0 +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define PGD_ORDER 0 #define PUD_ORDER aieeee_attempt_to_allocate_pud diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 676aa2ae1913..143a48136a4b 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28"); #ifdef CONFIG_PAGE_SIZE_16KB #define THREAD_SIZE_ORDER (0) #endif +#ifdef CONFIG_PAGE_SIZE_32KB +#define THREAD_SIZE_ORDER (0) +#endif #ifdef CONFIG_PAGE_SIZE_64KB #define THREAD_SIZE_ORDER (0) #endif diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 779821cd54ab..3f69725556af 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -19,6 +19,15 @@ static inline const char *msk2str(unsigned int mask) case PM_16K: return "16kb"; case PM_64K: return "64kb"; case PM_256K: return "256kb"; +#ifdef CONFIG_CPU_CAVIUM_OCTEON + case PM_8K: return "8kb"; + case PM_32K: return "32kb"; + case PM_128K: return "128kb"; + case PM_512K: return "512kb"; + case PM_2M: return "2Mb"; + case PM_8M: return "8Mb"; + case PM_32M: return "32Mb"; +#endif #ifndef CONFIG_CPU_VR41XX case PM_1M: return "1Mb"; case PM_4M: return "4Mb"; From 237e5a3443e5531336b880bbaf3e7bac110330f7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 20 Apr 2009 13:43:05 +0200 Subject: [PATCH 224/670] MIPS: Kconfig: Delete duplicate definition of RWSEM_GENERIC_SPINLOCK. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 023aa2d46503..09b1287a92ce 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1966,10 +1966,6 @@ config SECCOMP endmenu -config RWSEM_GENERIC_SPINLOCK - bool - default y - config LOCKDEP_SUPPORT bool default y From ad058e95f943e26205aa916b83b85ccb21bd4812 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 22 Apr 2009 08:01:48 +0200 Subject: [PATCH 225/670] MIPS: Alchemy: Timer build fix Fix breakage introduced by 8e19608e8b5c001e4a66ce482edc474f05fb7355. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index f58d4ffb8945..33fbae79af5e 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -44,7 +44,7 @@ extern int allow_au1k_wait; /* default off for CP0 Counter */ -static cycle_t au1x_counter1_read(void) +static cycle_t au1x_counter1_read(struct clocksource *cs) { return au_readl(SYS_RTCREAD); } From 1699e5c9c414f0e3b393eb87c4acfc319fe7a1c4 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 21 Apr 2009 23:31:12 +0200 Subject: [PATCH 226/670] MIPS: IP27: Fix clash with NMI_OFFSET from hardirq.h There was already a define for NMI_OFFSET in asm/sn/addr.h, which now clashes with linux/hardirq.h. Rename the one in sn/addr.h to fix IP27 builds.. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/include/asm/sn/addrs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h index fec9bdd34913..3a56d90abfa6 100644 --- a/arch/mips/include/asm/sn/addrs.h +++ b/arch/mips/include/asm/sn/addrs.h @@ -359,11 +359,11 @@ TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice)) #define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size -#define NMI_OFFSET(nasid, slice) \ +#define SN_NMI_OFFSET(nasid, slice) \ (KLD_NMI(nasid)->offset + \ KLD_NMI(nasid)->stride * (slice)) #define NMI_ADDR(nasid, slice) \ - TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice)) + TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice)) #define NMI_SIZE(nasid) KLD_NMI(nasid)->size #define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset From d0aab922b19aaaef13c946236cc71ab9b7f895ee Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 27 Apr 2009 15:31:34 +0200 Subject: [PATCH 227/670] MIPS: Make access_ok() sideeffect proof. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 09ff5bb17445..42b9cec2ee96 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -104,11 +104,21 @@ #define __access_mask get_fs().seg -#define __access_ok(addr, size, mask) \ - (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0) +#define __access_ok(addr, size, mask) \ +({ \ + const volatile void __user *__up = addr; \ + unsigned long __addr = (unsigned long) __up; \ + unsigned long __size = size; \ + unsigned long __mask = mask; \ + unsigned long __ok; \ + \ + __ok = (signed long)(__mask & (__addr | (__addr + __size) | \ + __ua_size(__size))); \ + __ok == 0; \ +}) #define access_ok(type, addr, size) \ - likely(__access_ok((unsigned long)(addr), (size), __access_mask)) + likely(__access_ok((addr), (size), __access_mask)) /* * put_user: - Write a simple value into user space. From ed01b3d240b76dc1b93d08833832f9ce51a11f02 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 27 Apr 2009 16:46:21 +0200 Subject: [PATCH 228/670] MIPS: Make uaccess.h slightly more sparse friendly. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 39 +++++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 12 deletions(-) diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 42b9cec2ee96..5c0876073f13 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -104,17 +104,17 @@ #define __access_mask get_fs().seg -#define __access_ok(addr, size, mask) \ -({ \ - const volatile void __user *__up = addr; \ - unsigned long __addr = (unsigned long) __up; \ - unsigned long __size = size; \ - unsigned long __mask = mask; \ - unsigned long __ok; \ - \ - __ok = (signed long)(__mask & (__addr | (__addr + __size) | \ - __ua_size(__size))); \ - __ok == 0; \ +#define __access_ok(addr, size, mask) \ +({ \ + unsigned long __addr = (unsigned long) (addr); \ + unsigned long __size = size; \ + unsigned long __mask = mask; \ + unsigned long __ok; \ + \ + __chk_user_ptr(addr); \ + __ok = (signed long)(__mask & (__addr | (__addr + __size) | \ + __ua_size(__size))); \ + __ok == 0; \ }) #define access_ok(type, addr, size) \ @@ -235,6 +235,7 @@ do { \ ({ \ int __gu_err; \ \ + __chk_user_ptr(ptr); \ __get_user_common((x), size, ptr); \ __gu_err; \ }) @@ -315,6 +316,7 @@ do { \ __typeof__(*(ptr)) __pu_val; \ int __pu_err = 0; \ \ + __chk_user_ptr(ptr); \ __pu_val = (x); \ switch (size) { \ case 1: __put_user_asm("sb", ptr); break; \ @@ -882,7 +884,20 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); __cu_len; \ }) -#define __copy_in_user(to, from, n) __copy_from_user(to, from, n) +#define __copy_in_user(to, from, n) \ +({ \ + void __user *__cu_to; \ + const void __user *__cu_from; \ + long __cu_len; \ + \ + might_sleep(); \ + __cu_to = (to); \ + __cu_from = (from); \ + __cu_len = (n); \ + __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ + __cu_len); \ + __cu_len; \ +}) #define copy_in_user(to, from, n) \ ({ \ From 01caec8396eff7d519e6d85c5a1c860e7d4714e5 Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Mon, 27 Apr 2009 23:50:21 -0600 Subject: [PATCH 229/670] MIPS: MSP71xx: Resolve multiple definition of plat_timer_setup There have been a number of compile problems with the msp71xx configuration ever since it was included in the linux-mips.org repository. This patch resolves the "multiple definition of plat_timer_setup" problem, and creates the required get_c0_compare_int function. This patch has been compile-tested against the current HEAD. Signed-off-by: Shane McDonald Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/msp71xx/msp_time.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c index 7cfeda5a651b..cca64e15f57f 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_time.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c @@ -81,10 +81,7 @@ void __init plat_time_init(void) mips_hpt_frequency = cpu_rate/2; } -void __init plat_timer_setup(struct irqaction *irq) +unsigned int __init get_c0_compare_int(void) { -#ifdef CONFIG_IRQ_MSP_CIC - /* we are using the vpe0 counter for timer interrupts */ - setup_irq(MSP_INT_VPE0_TIMER, irq); -#endif + return MSP_INT_VPE0_TIMER; } From 005076a16bd4c5ea60905ff475e8af57d60578f1 Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Mon, 27 Apr 2009 23:52:25 -0600 Subject: [PATCH 230/670] MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx reset There have been a number of compile problems with the msp71xx configuration ever since it was included in the linux-mips.org repository. This patch resolves compilation problems with attempting to reset the board using non-existent GPIO routines. This patch has been compile-tested against the current HEAD. Signed-off-by: Shane McDonald Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/msp71xx/msp_setup.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c index c93675615f5d..a54e85b3cf29 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c @@ -21,7 +21,6 @@ #if defined(CONFIG_PMC_MSP7120_GW) #include -#include #define MSP_BOARD_RESET_GPIO 9 #endif @@ -88,11 +87,8 @@ void msp7120_reset(void) * as GPIO char driver may not be enabled and it would look up * data inRAM! */ - set_value_reg32(GPIO_CFG3_REG, - basic_mode_mask(MSP_BOARD_RESET_GPIO), - basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO)); - set_reg32(GPIO_DATA3_REG, - basic_data_mask(MSP_BOARD_RESET_GPIO)); + set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000); + set_reg32(GPIO_DATA3_REG, 8); /* * In case GPIO9 doesn't reset the board (jumper configurable!) From ef41f4600f05a4e973c3ac72869c18269567b319 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Apr 2009 14:17:54 +0200 Subject: [PATCH 231/670] MIPS: uaccess: Switch lock annotations to might_fault(). Signed-off-by: Ralf Baechle --- arch/mips/include/asm/checksum.h | 4 ++-- arch/mips/include/asm/uaccess.h | 37 ++++++++++++++++++-------------- 2 files changed, 23 insertions(+), 18 deletions(-) diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h index 290485ac5407..f2f7c6c264da 100644 --- a/arch/mips/include/asm/checksum.h +++ b/arch/mips/include/asm/checksum.h @@ -40,7 +40,7 @@ static inline __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr) { - might_sleep(); + might_fault(); return __csum_partial_copy_user((__force void *)src, dst, len, sum, err_ptr); } @@ -53,7 +53,7 @@ static inline __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len, __wsum sum, int *err_ptr) { - might_sleep(); + might_fault(); if (access_ok(VERIFY_WRITE, dst, len)) return __csum_partial_copy_user(src, (__force void *)dst, len, sum, err_ptr); diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 5c0876073f13..8de858f5449f 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -245,6 +245,7 @@ do { \ int __gu_err = -EFAULT; \ const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \ \ + might_fault(); \ if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \ __get_user_common((x), size, __gu_ptr); \ \ @@ -334,6 +335,7 @@ do { \ __typeof__(*(ptr)) __pu_val = (x); \ int __pu_err = -EFAULT; \ \ + might_fault(); \ if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \ switch (size) { \ case 1: __put_user_asm("sb", __pu_addr); break; \ @@ -708,10 +710,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n); const void *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ + might_fault(); \ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \ __cu_len; \ }) @@ -764,13 +766,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \ + if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) { \ + might_fault(); \ __cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) @@ -843,10 +846,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ __cu_len; \ @@ -874,13 +877,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ - if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \ + if (access_ok(VERIFY_READ, __cu_from, __cu_len)) { \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) @@ -890,10 +894,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ __cu_len; \ @@ -905,14 +909,15 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n); const void __user *__cu_from; \ long __cu_len; \ \ - might_sleep(); \ __cu_to = (to); \ __cu_from = (from); \ __cu_len = (n); \ if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \ - access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \ + access_ok(VERIFY_WRITE, __cu_to, __cu_len))) { \ + might_fault(); \ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \ __cu_len); \ + } \ __cu_len; \ }) @@ -932,7 +937,7 @@ __clear_user(void __user *addr, __kernel_size_t size) { __kernel_size_t res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, $0\n\t" @@ -981,7 +986,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -1018,7 +1023,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -1037,7 +1042,7 @@ static inline long __strlen_user(const char __user *s) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" __MODULE_JAL(__strlen_user_nocheck_asm) @@ -1067,7 +1072,7 @@ static inline long strlen_user(const char __user *s) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" __MODULE_JAL(__strlen_user_asm) @@ -1084,7 +1089,7 @@ static inline long __strnlen_user(const char __user *s, long n) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" @@ -1115,7 +1120,7 @@ static inline long strnlen_user(const char __user *s, long n) { long res; - might_sleep(); + might_fault(); __asm__ __volatile__( "move\t$4, %1\n\t" "move\t$5, %2\n\t" From 165533c3bd750042e7e140dff5bc2406a5104efe Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Apr 2009 17:31:50 +0200 Subject: [PATCH 232/670] MIPS: IP27: Get rid of #ident. Gcc 4.4.0 doesn't like it. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/sn/nmi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h index 6b7b0b5f3729..1af49897d4e1 100644 --- a/arch/mips/include/asm/sn/nmi.h +++ b/arch/mips/include/asm/sn/nmi.h @@ -3,13 +3,13 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * + * Derived from IRIX , Revision 1.5. + * * Copyright (C) 1992 - 1997 Silicon Graphics, Inc. */ #ifndef __ASM_SN_NMI_H #define __ASM_SN_NMI_H -#ident "$Revision: 1.5 $" - #include /* From 05e41404470662a17699af9e6d91fc80ed91e757 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Apr 2009 19:38:35 +0200 Subject: [PATCH 233/670] MIPS: Set compiler options only after the compiler prefix has ben set. Otherwise indigestable options might be passed to the host compiler. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 8d544c7c9fe9..3d5626ee0a5c 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -14,8 +14,6 @@ KBUILD_DEFCONFIG := ip22_defconfig -cflags-y := -ffunction-sections - # # Select the object file format to substitute into the linker script. # @@ -50,6 +48,8 @@ ifneq ($(SUBARCH),$(ARCH)) endif endif +cflags-y := -ffunction-sections + ifdef CONFIG_32BIT ld-emul = $(32bit-emul) vmlinux-32 = vmlinux From 1a4ba061b3c93804027b4cc4c588cfad748d9fc2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 28 Apr 2009 19:28:33 +0200 Subject: [PATCH 234/670] MIPS: Use -mno-check-zero-division I don't think that in 15 years of Linux/MIPS the zero division checking code generated by gcc by default has ever caught anything. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 3d5626ee0a5c..26947ab85260 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -49,6 +49,7 @@ ifneq ($(SUBARCH),$(ARCH)) endif cflags-y := -ffunction-sections +cflags-y += $(call cc-option, -mno-check-zero-division) ifdef CONFIG_32BIT ld-emul = $(32bit-emul) From 5c5dd1d29120affb127955277bfba9f60e27a3fe Mon Sep 17 00:00:00 2001 From: Shane McDonald Date: Tue, 28 Apr 2009 17:00:27 -0600 Subject: [PATCH 235/670] MIPS: MSP71xx: Remove the RAMROOT functions The RAMROOT function was a successful but non-portable attempt to append the root filesystem to the end of the kernel image. The preferred and portable solution is to use an initramfs instead. Signed-off-by: Shane McDonald Signed-off-by: Ralf Baechle --- arch/mips/pmc-sierra/Kconfig | 12 ----- arch/mips/pmc-sierra/msp71xx/msp_prom.c | 60 +------------------------ 2 files changed, 1 insertion(+), 71 deletions(-) diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig index 90261b83db04..c139988bb85d 100644 --- a/arch/mips/pmc-sierra/Kconfig +++ b/arch/mips/pmc-sierra/Kconfig @@ -36,18 +36,6 @@ config PMC_MSP7120_FPGA endchoice -menu "Options for PMC-Sierra MSP chipsets" - depends on PMC_MSP - -config PMC_MSP_EMBEDDED_ROOTFS - bool "Root filesystem embedded in kernel image" - select MTD - select MTD_BLOCK - select MTD_PMC_MSP_RAMROOT - select MTD_RAM - -endmenu - config HYPERTRANSPORT bool "Hypertransport Support for PMC-Sierra Yosemite" depends on PMC_YOSEMITE diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c index e5bd5481d8db..c317a3623ce9 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c @@ -40,12 +40,6 @@ #include #include #include -#ifdef CONFIG_CRAMFS -#include -#endif -#ifdef CONFIG_SQUASHFS -#include -#endif #include #include @@ -435,10 +429,6 @@ struct prom_pmemblock *__init prom_getmdesc(void) char *str; unsigned int memsize; unsigned int heaptop; -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT - void *ramroot_start; - unsigned long ramroot_size; -#endif int i; str = prom_getenv(memsz_env); @@ -506,19 +496,7 @@ struct prom_pmemblock *__init prom_getmdesc(void) i++; /* 3 */ mdesc[i].type = BOOT_MEM_RESERVED; mdesc[i].base = CPHYSADDR((u32)_text); -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT - if (get_ramroot(&ramroot_start, &ramroot_size)) { - /* - * Rootfs in RAM -- follows kernel - * Combine rootfs image with kernel block so a - * page (4k) isn't wasted between memory blocks - */ - mdesc[i].size = CPHYSADDR(PAGE_ALIGN( - (u32)ramroot_start + ramroot_size)) - mdesc[i].base; - } else -#endif - mdesc[i].size = CPHYSADDR(PAGE_ALIGN( - (u32)_end)) - mdesc[i].base; + mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base; /* Remainder of RAM -- under memsize */ i++; /* 5 */ @@ -528,39 +506,3 @@ struct prom_pmemblock *__init prom_getmdesc(void) return &mdesc[0]; } - -/* rootfs functions */ -#ifdef CONFIG_MTD_PMC_MSP_RAMROOT -bool get_ramroot(void **start, unsigned long *size) -{ - extern char _end[]; - - /* Check for start following the end of the kernel */ - void *check_start = (void *)_end; - - /* Check for supported rootfs types */ -#ifdef CONFIG_CRAMFS - if (*(__u32 *)check_start == CRAMFS_MAGIC) { - /* Get CRAMFS size */ - *start = check_start; - *size = PAGE_ALIGN(((struct cramfs_super *) - check_start)->size); - - return true; - } -#endif -#ifdef CONFIG_SQUASHFS - if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) { - /* Get SQUASHFS size */ - *start = check_start; - *size = PAGE_ALIGN(((struct squashfs_super_block *) - check_start)->bytes_used); - - return true; - } -#endif - - return false; -} -EXPORT_SYMBOL(get_ramroot); -#endif From 0b54352600b820a6d25f151cbd8975ed9b2aeb09 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 30 Apr 2009 02:16:19 +0200 Subject: [PATCH 236/670] MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware. Probably nobody does arithmetic on cp0 register values so this has never bitten. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mipsregs.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 0ef30c81fea6..32ef8bec5c85 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -728,8 +728,8 @@ do { \ ".set\tmips64\n\t" \ "dmfc0\t%M0, " #source "\n\t" \ "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ + "dsra\t%M0, %M0, 32\n\t" \ + "dsra\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ : "=r" (__val)); \ else \ @@ -737,8 +737,8 @@ do { \ ".set\tmips64\n\t" \ "dmfc0\t%M0, " #source ", " #sel "\n\t" \ "dsll\t%L0, %M0, 32\n\t" \ - "dsrl\t%M0, %M0, 32\n\t" \ - "dsrl\t%L0, %L0, 32\n\t" \ + "dsra\t%M0, %M0, 32\n\t" \ + "dsra\t%L0, %L0, 32\n\t" \ ".set\tmips0" \ : "=r" (__val)); \ local_irq_restore(__flags); \ From bb86bf28aec6d0a207ae09f38a43e94133d4d6db Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 25 Apr 2009 11:25:34 +0200 Subject: [PATCH 237/670] MIPS: Fix highmem. Commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) rsp. b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (linux-mips.org): > From: Chris Dearman > Date: Wed, 19 Sep 2007 00:58:24 +0100 > Subject: [PATCH] [MIPS] Allow setting of the cache attribute at run time. > > Slightly tacky, but there is a precedent in the sparc archirecture code. introduces the variable _page_cachable_default, which defaults to zero and. is used to create the prototype PTE for __kmap_atomic in arch/mips/mm/init.c:kmap_init before initialization in arch/mips/mm/c-r4k.c:coherency_setup, so the default value of 0 will be used as the CCA of kmap atomic pages which on many processors is not a defined CCA value and may result in writes to kmap_atomic pages getting corrupted. Debugged by Jon Fraser (jfraser@broadcom.com). Signed-off-by: Ralf Baechle --- arch/mips/include/asm/fixmap.h | 3 +++ arch/mips/include/asm/highmem.h | 6 ++++-- arch/mips/mm/highmem.c | 25 +++++++++++++++++++------ arch/mips/mm/init.c | 26 -------------------------- 4 files changed, 26 insertions(+), 34 deletions(-) diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h index 9cc8522a394f..0f5caa1307f1 100644 --- a/arch/mips/include/asm/fixmap.h +++ b/arch/mips/include/asm/fixmap.h @@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr) return __virt_to_fix(vaddr); } +#define kmap_get_fixmap_pte(vaddr) \ + pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) + /* * Called from pgtable_init() */ diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h index 4374ab2adc75..25adfb02923d 100644 --- a/arch/mips/include/asm/highmem.h +++ b/arch/mips/include/asm/highmem.h @@ -30,8 +30,6 @@ /* declarations for highmem.c */ extern unsigned long highstart_pfn, highend_pfn; -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; extern pte_t *pkmap_page_table; /* @@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr); #define flush_cache_kmaps() flush_cache_all() +extern void kmap_init(void); + +#define kmap_prot PAGE_KERNEL + #endif /* __KERNEL__ */ #endif /* _ASM_HIGHMEM_H */ diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c index 4481656d1065..2b1309b2580a 100644 --- a/arch/mips/mm/highmem.c +++ b/arch/mips/mm/highmem.c @@ -1,7 +1,12 @@ #include #include +#include #include +static pte_t *kmap_pte; + +unsigned long highstart_pfn, highend_pfn; + void *__kmap(struct page *page) { void *addr; @@ -14,6 +19,7 @@ void *__kmap(struct page *page) return addr; } +EXPORT_SYMBOL(__kmap); void __kunmap(struct page *page) { @@ -22,6 +28,7 @@ void __kunmap(struct page *page) return; kunmap_high(page); } +EXPORT_SYMBOL(__kunmap); /* * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because @@ -48,11 +55,12 @@ void *__kmap_atomic(struct page *page, enum km_type type) #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(!pte_none(*(kmap_pte - idx))); #endif - set_pte(kmap_pte-idx, mk_pte(page, kmap_prot)); + set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL)); local_flush_tlb_one((unsigned long)vaddr); return (void*) vaddr; } +EXPORT_SYMBOL(__kmap_atomic); void __kunmap_atomic(void *kvaddr, enum km_type type) { @@ -77,6 +85,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type) pagefault_enable(); } +EXPORT_SYMBOL(__kunmap_atomic); /* * This is the same as kmap_atomic() but can map memory that doesn't @@ -92,7 +101,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type) debug_kmap_atomic(type); idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); - set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot)); + set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL)); flush_tlb_one(vaddr); return (void*) vaddr; @@ -111,7 +120,11 @@ struct page *__kmap_atomic_to_page(void *ptr) return pte_page(*pte); } -EXPORT_SYMBOL(__kmap); -EXPORT_SYMBOL(__kunmap); -EXPORT_SYMBOL(__kmap_atomic); -EXPORT_SYMBOL(__kunmap_atomic); +void __init kmap_init(void) +{ + unsigned long kmap_vstart; + + /* cache the first kmap pte */ + kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN); + kmap_pte = kmap_get_fixmap_pte(kmap_vstart); +} diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index d9348946a19e..c5511294a9ee 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -104,14 +104,6 @@ unsigned long setup_zero_pages(void) return 1UL << order; } -/* - * These are almost like kmap_atomic / kunmap_atmic except they take an - * additional address argument as the hint. - */ - -#define kmap_get_fixmap_pte(vaddr) \ - pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) - #ifdef CONFIG_MIPS_MT_SMTC static pte_t *kmap_coherent_pte; static void __init kmap_coherent_init(void) @@ -264,24 +256,6 @@ void copy_from_user_page(struct vm_area_struct *vma, } } -#ifdef CONFIG_HIGHMEM -unsigned long highstart_pfn, highend_pfn; - -pte_t *kmap_pte; -pgprot_t kmap_prot; - -static void __init kmap_init(void) -{ - unsigned long kmap_vstart; - - /* cache the first kmap pte */ - kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN); - kmap_pte = kmap_get_fixmap_pte(kmap_vstart); - - kmap_prot = PAGE_KERNEL; -} -#endif /* CONFIG_HIGHMEM */ - void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { From c21004cd5b4cb7d479514d470a62366e8307412c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 30 Apr 2009 18:14:56 +0200 Subject: [PATCH 238/670] MIPS: Rewrite to work with gcc 4.4.0. The inline assembler used on 32-bit kernels was using the "h" constraint which was considered dangerous and removed for gcc 4.4.0. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/div64.h | 144 ++++++++++++---------------------- 1 file changed, 51 insertions(+), 93 deletions(-) diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h index d1d699105c11..dc5ea5736440 100644 --- a/arch/mips/include/asm/div64.h +++ b/arch/mips/include/asm/div64.h @@ -6,105 +6,63 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#ifndef _ASM_DIV64_H -#define _ASM_DIV64_H +#ifndef __ASM_DIV64_H +#define __ASM_DIV64_H + +#include + +#if BITS_PER_LONG == 64 #include -#if (_MIPS_SZLONG == 32) - -#include - /* * No traps on overflows for any of these... */ -#define do_div64_32(res, high, low, base) ({ \ - unsigned long __quot32, __mod32; \ - unsigned long __cf, __tmp, __tmp2, __i; \ - \ - __asm__(".set push\n\t" \ - ".set noat\n\t" \ - ".set noreorder\n\t" \ - "move %2, $0\n\t" \ - "move %3, $0\n\t" \ - "b 1f\n\t" \ - " li %4, 0x21\n" \ - "0:\n\t" \ - "sll $1, %0, 0x1\n\t" \ - "srl %3, %0, 0x1f\n\t" \ - "or %0, $1, %5\n\t" \ - "sll %1, %1, 0x1\n\t" \ - "sll %2, %2, 0x1\n" \ - "1:\n\t" \ - "bnez %3, 2f\n\t" \ - " sltu %5, %0, %z6\n\t" \ - "bnez %5, 3f\n" \ - "2:\n\t" \ - " addiu %4, %4, -1\n\t" \ - "subu %0, %0, %z6\n\t" \ - "addiu %2, %2, 1\n" \ - "3:\n\t" \ - "bnez %4, 0b\n\t" \ - " srl %5, %1, 0x1f\n\t" \ - ".set pop" \ - : "=&r" (__mod32), "=&r" (__tmp), \ - "=&r" (__quot32), "=&r" (__cf), \ - "=&r" (__i), "=&r" (__tmp2) \ - : "Jr" (base), "0" (high), "1" (low)); \ - \ - (res) = __quot32; \ - __mod32; }) +#define __div64_32(n, base) \ +({ \ + unsigned long __cf, __tmp, __tmp2, __i; \ + unsigned long __quot32, __mod32; \ + unsigned long __high, __low; \ + unsigned long long __n; \ + \ + __high = *__n >> 32; \ + __low = __n; \ + __asm__( \ + " .set push \n" \ + " .set noat \n" \ + " .set noreorder \n" \ + " move %2, $0 \n" \ + " move %3, $0 \n" \ + " b 1f \n" \ + " li %4, 0x21 \n" \ + "0: \n" \ + " sll $1, %0, 0x1 \n" \ + " srl %3, %0, 0x1f \n" \ + " or %0, $1, %5 \n" \ + " sll %1, %1, 0x1 \n" \ + " sll %2, %2, 0x1 \n" \ + "1: \n" \ + " bnez %3, 2f \n" \ + " sltu %5, %0, %z6 \n" \ + " bnez %5, 3f \n" \ + "2: \n" \ + " addiu %4, %4, -1 \n" \ + " subu %0, %0, %z6 \n" \ + " addiu %2, %2, 1 \n" \ + "3: \n" \ + " bnez %4, 0b\n\t" \ + " srl %5, %1, 0x1f\n\t" \ + " .set pop" \ + : "=&r" (__mod32), "=&r" (__tmp), \ + "=&r" (__quot32), "=&r" (__cf), \ + "=&r" (__i), "=&r" (__tmp2) \ + : "Jr" (base), "0" (__high), "1" (__low)); \ + \ + (__n) = __quot32; \ + __mod32; \ +}) -#define do_div(n, base) ({ \ - unsigned long long __quot; \ - unsigned long __mod; \ - unsigned long long __div; \ - unsigned long __upper, __low, __high, __base; \ - \ - __div = (n); \ - __base = (base); \ - \ - __high = __div >> 32; \ - __low = __div; \ - __upper = __high; \ - \ - if (__high) \ - __asm__("divu $0, %z2, %z3" \ - : "=h" (__upper), "=l" (__high) \ - : "Jr" (__high), "Jr" (__base) \ - : GCC_REG_ACCUM); \ - \ - __mod = do_div64_32(__low, __upper, __low, __base); \ - \ - __quot = __high; \ - __quot = __quot << 32 | __low; \ - (n) = __quot; \ - __mod; }) +#endif /* BITS_PER_LONG == 64 */ -#endif /* (_MIPS_SZLONG == 32) */ - -#if (_MIPS_SZLONG == 64) - -/* - * Hey, we're already 64-bit, no - * need to play games.. - */ -#define do_div(n, base) ({ \ - unsigned long __quot; \ - unsigned int __mod; \ - unsigned long __div; \ - unsigned int __base; \ - \ - __div = (n); \ - __base = (base); \ - \ - __mod = __div % __base; \ - __quot = __div / __base; \ - \ - (n) = __quot; \ - __mod; }) - -#endif /* (_MIPS_SZLONG == 64) */ - -#endif /* _ASM_DIV64_H */ +#endif /* __ASM_DIV64_H */ From d0ce9a5a47113eec041a0972a0b86134b8fd2828 Mon Sep 17 00:00:00 2001 From: Coly Li Date: Thu, 23 Apr 2009 03:06:06 +0800 Subject: [PATCH 239/670] MIPS: Cavium: Add struct clocksource * argument to octeon_cvmcount_read() This patch modifies parameter of octeon_cvmcount_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li Cc: David Daney Cc: Ingo Molnar Reviewed-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/csrc-octeon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c index 70fd92c31657..96110f217dcd 100644 --- a/arch/mips/cavium-octeon/csrc-octeon.c +++ b/arch/mips/cavium-octeon/csrc-octeon.c @@ -38,7 +38,7 @@ void octeon_init_cvmcount(void) local_irq_restore(flags); } -static cycle_t octeon_cvmcount_read(void) +static cycle_t octeon_cvmcount_read(struct clocksource *cs) { return read_c0_cvmcount(); } From a6d5ff04e83b36e0d5c2c50ef4d18e9f38b5abc2 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 5 May 2009 12:49:47 -0700 Subject: [PATCH 240/670] MIPS: Use force_sig when handling address errors. When init is started it is SIGNAL_UNKILLABLE. If it were to get an address error, we would try to send it SIGBUS, but it would be ignored and the faulting instruction restarted. This results in an endless loop. We need to use force_sig() instead so it will actually die and give us some useful information. Reported-by: Florian Fainelli Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/kernel/unaligned.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index bf4c4a979abb..67bd626942ab 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -482,19 +482,19 @@ fault: return; die_if_kernel("Unhandled kernel unaligned access", regs); - send_sig(SIGSEGV, current, 1); + force_sig(SIGSEGV, current); return; sigbus: die_if_kernel("Unhandled kernel unaligned access", regs); - send_sig(SIGBUS, current, 1); + force_sig(SIGBUS, current); return; sigill: die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs); - send_sig(SIGILL, current, 1); + force_sig(SIGILL, current); } asmlinkage void do_ade(struct pt_regs *regs) From 5d81b83d03eb32085c569854695e102dde7af544 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 4 May 2009 23:51:54 +0200 Subject: [PATCH 241/670] MIPS: Sibyte: Fix locking in set_irq_affinity Locking of irq_desc is now done in irq_set_affinity; don't lock it again in chip specific set_affinity function. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sibyte/bcm1480/irq.c | 7 ++----- arch/mips/sibyte/sb1250/irq.c | 7 ++----- 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 352352b3cb2f..c147c4b35d3f 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -113,7 +113,6 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) { int i = 0, old_cpu, cpu, int_on, k; u64 cur_ints; - struct irq_desc *desc = irq_desc + irq; unsigned long flags; unsigned int irq_dirty; @@ -127,8 +126,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpu_logical_map(i); /* Protect against other affinity changers and IMR manipulation */ - spin_lock_irqsave(&desc->lock, flags); - spin_lock(&bcm1480_imr_lock); + spin_lock_irqsave(&bcm1480_imr_lock, flags); /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = bcm1480_irq_owner[irq]; @@ -153,8 +151,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); } } - spin_unlock(&bcm1480_imr_lock); - spin_unlock_irqrestore(&desc->lock, flags); + spin_unlock_irqrestore(&bcm1480_imr_lock, flags); } #endif diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index c08ff582da6f..38cb998ade22 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -107,7 +107,6 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) { int i = 0, old_cpu, cpu, int_on; u64 cur_ints; - struct irq_desc *desc = irq_desc + irq; unsigned long flags; i = cpumask_first(mask); @@ -121,8 +120,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpu_logical_map(i); /* Protect against other affinity changers and IMR manipulation */ - spin_lock_irqsave(&desc->lock, flags); - spin_lock(&sb1250_imr_lock); + spin_lock_irqsave(&sb1250_imr_lock, flags); /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = sb1250_irq_owner[irq]; @@ -144,8 +142,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + R_IMR_INTERRUPT_MASK)); } - spin_unlock(&sb1250_imr_lock); - spin_unlock_irqrestore(&desc->lock, flags); + spin_unlock_irqrestore(&sb1250_imr_lock, flags); } #endif From d8e2f53ac99f4ce7d63807a84f98d1b80df598cf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 14 May 2009 07:46:59 -0400 Subject: [PATCH 242/670] cifs: fix error handling in parse_DFS_referrals cifs_strndup_from_ucs returns NULL on error, not an ERR_PTR Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 75e6623a8635..5759ba53dc96 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3976,9 +3976,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, max_len = data_end - temp; node->path_name = cifs_strndup_from_ucs(temp, max_len, is_unicode, nls_codepage); - if (IS_ERR(node->path_name)) { - rc = PTR_ERR(node->path_name); - node->path_name = NULL; + if (!node->path_name) { + rc = -ENOMEM; goto parse_DFS_referrals_exit; } @@ -3987,11 +3986,8 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, max_len = data_end - temp; node->node_name = cifs_strndup_from_ucs(temp, max_len, is_unicode, nls_codepage); - if (IS_ERR(node->node_name)) { - rc = PTR_ERR(node->node_name); - node->node_name = NULL; - goto parse_DFS_referrals_exit; - } + if (!node->node_name) + rc = -ENOMEM; } parse_DFS_referrals_exit: From fbc97e4c5c31ea198f912196b1379d7493362800 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Mon, 27 Apr 2009 09:23:37 +0200 Subject: [PATCH 243/670] eeepc-laptop: fix wlan rfkill state change during init When an rfkill device is registered, the rfkill core will change its state to the system default. So we need to prepare for state changes *before* we register it. That means installing the eeepc-specific ACPI callback which handles the hotplug of the wireless network adaptor. This problem doesn't occur during normal operation. You have to 1) Boot with wireless enabled. eeepc-laptop should load automatically. 2) modprobe -r eeepc-laptop 3) modprobe eeepc-laptop On boot, the default rfkill state will be set to enabled. With the current core code, step 2) will disable the wireless. Therefore in step 3), the wireless will change state during registration, from disabled to enabled. But without this fix, the PCI device for the wireless adaptor will not appear. Signed-off-by: Alan Jenkins Acked-by: Matthew Garrett Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 6f54fd1757cd..e21f7cd72e4e 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -649,6 +649,9 @@ static int eeepc_hotk_add(struct acpi_device *device) if (ACPI_FAILURE(status)) printk(EEEPC_ERR "Error installing notify handler\n"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); + if (get_acpi(CM_ASL_WLAN) != -1) { ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN); @@ -704,9 +707,6 @@ static int eeepc_hotk_add(struct acpi_device *device) goto bluetooth_fail; } - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); - return 0; bluetooth_fail: From 64b86b6583db832b28bb54575e32b9e2a1a7d84f Mon Sep 17 00:00:00 2001 From: Darren Salt Date: Mon, 27 Apr 2009 09:23:38 +0200 Subject: [PATCH 244/670] eeepc-laptop: report brightness control events via the input layer This maps the brightness control events to one of two keys, either KEY_BRIGHTNESSDOWN or KEY_BRIGHTNESSUP, as needed. Some mapping has to be done due to the fact that the BIOS reports them as + ; the selection is done according to the sign of the change in brightness (if this is 0, no keypress is reported). (Ref. http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-April/002001.html) Signed-off-by: Darren Salt Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index e21f7cd72e4e..f54cfeac5221 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -166,6 +166,8 @@ static struct key_entry eeepc_keymap[] = { {KE_KEY, 0x1b, KEY_ZOOM }, {KE_KEY, 0x1c, KEY_PROG2 }, {KE_KEY, 0x1d, KEY_PROG3 }, + {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, + {KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP }, {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, @@ -512,11 +514,16 @@ static int eeepc_hotk_check(void) return 0; } -static void notify_brn(void) +static int notify_brn(void) { + /* returns the *previous* brightness, or -1 */ struct backlight_device *bd = eeepc_backlight_device; - if (bd) + if (bd) { + int old = bd->props.brightness; bd->props.brightness = read_brightness(bd); + return old; + } + return -1; } static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) @@ -558,17 +565,33 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) { static struct key_entry *key; u16 count; + int brn = -ENODEV; if (!ehotk) return; if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) - notify_brn(); + brn = notify_brn(); count = ehotk->event_count[event % 128]++; acpi_bus_generate_proc_event(ehotk->device, event, count); acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class, dev_name(&ehotk->device->dev), event, count); if (ehotk->inputdev) { + if (brn != -ENODEV) { + /* brightness-change events need special + * handling for conversion to key events + */ + if (brn < 0) + brn = event; + else + brn += NOTIFY_BRN_MIN; + if (event < brn) + event = NOTIFY_BRN_MIN; /* brightness down */ + else if (event > brn) + event = NOTIFY_BRN_MIN + 2; /* ... up */ + else + event = NOTIFY_BRN_MIN + 1; /* ... unchanged */ + } key = eepc_get_entry_by_scancode(event); if (key) { switch (key->type) { From 978605c4fd8e7470f225eec7b5aab69d8796afcc Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Mon, 27 Apr 2009 09:23:39 +0200 Subject: [PATCH 245/670] eeepc-laptop: Work around rfkill firmware bug 1) Buggy firmware can change the RFKILL state by itself. This is easily detected. The RFKILL API states that in such cases, we should call rfkill_force_state() to notify the core. I have reported the bug to Asus. I believe this is the right thing to do for robustness, even if this particular firmware bug is fixed. 2) The same bug causes the wireless toggle key to be reported as 0x11 instead of 0x10. 0x11 is otherwise unused, so it should be safe to add this as a new keycode. The bug is triggered by removing the laptop battery while hibernated. On resume, the wireless toggle key causes the firmware to toggle the wireless state itself. (Also, the key is reported as 0x11 when the current wireless state is OFF). This is very poor behaviour because the OS can't predict whether the firmware is controlling the RFKILL state. Without this workaround, the bug means users have to press the wireless toggle key twice to enable, due to the OS/firmware conflict. (Assuming rfkill-input or equivalent is being used). The workaround avoids this. I believe that acpid scripts which toggle the value of the sysfs state file when the toggle key is pressed will be rendered ineffective by the bug, regardless of this workaround. If they simply toggle the state, when the firmware has already toggled it, then you will never see a state change. Tested on "EEEPC 4G" only. Signed-off-by: Alan Jenkins Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index f54cfeac5221..57f21f0a5655 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -158,6 +158,7 @@ enum { KE_KEY, KE_END }; static struct key_entry eeepc_keymap[] = { /* Sleep already handled via generic ACPI code */ {KE_KEY, 0x10, KEY_WLAN }, + {KE_KEY, 0x11, KEY_WLAN }, {KE_KEY, 0x12, KEY_PROG1 }, {KE_KEY, 0x13, KEY_MUTE }, {KE_KEY, 0x14, KEY_VOLUMEDOWN }, @@ -528,6 +529,7 @@ static int notify_brn(void) static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) { + enum rfkill_state state; struct pci_dev *dev; struct pci_bus *bus = pci_find_bus(0, 1); @@ -539,7 +541,9 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) return; } - if (get_acpi(CM_ASL_WLAN) == 1) { + eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state); + + if (state == RFKILL_STATE_UNBLOCKED) { dev = pci_get_slot(bus, 0); if (dev) { /* Device already present */ @@ -559,6 +563,8 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) pci_dev_put(dev); } } + + rfkill_force_state(ehotk->eeepc_wlan_rfkill, state); } static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) From 158ca1d75dd0d6223f3b1dd741d30777da62ab80 Mon Sep 17 00:00:00 2001 From: Grigori Goronzy Date: Mon, 27 Apr 2009 09:23:40 +0200 Subject: [PATCH 246/670] eeepc-laptop: support for super hybrid engine (SHE) The older eeepc-acpi driver allowed to control the SHE performance preset through a ACPI function for just this purpose. SHE underclocks and undervolts the FSB and undervolts the CPU (at preset 2, "powersave"), or slightly overclocks the CPU (at preset 0, "performance"). Preset 1 is the default setting with default clocks and voltage. The new eeepc-laptop driver doesn't support it anymore. The attached patch adds support for it to eeepc-laptop. It's very straight-forward and almost trivial. Signed-off-by: Grigori Goronzy Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 57f21f0a5655..7aaf5879f666 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -384,11 +384,13 @@ static ssize_t show_sys_acpi(int cm, char *buf) EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA); EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER); EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH); +EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV); static struct attribute *platform_attributes[] = { &dev_attr_camera.attr, &dev_attr_cardr.attr, &dev_attr_disp.attr, + &dev_attr_cpufv.attr, NULL }; From 309f5fbda37d5e8f1233e8b80b8e9de77262e864 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 27 Apr 2009 09:23:42 +0200 Subject: [PATCH 247/670] asus-laptop: fix input keycode KEY_STOP is now KEY_STOPCD It's the correct key to stop a media BTN_EXTRA is now KEY_SCREENLOCK: The laptop manual tells us that this key is for screenlock KEY_TV is now KEY_PROG1 So it can be reported to X server Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/361505 Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/asus-laptop.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index eeafc6c0160d..bfc1a8892a32 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -269,16 +269,16 @@ static struct key_entry asus_keymap[] = { {KE_KEY, 0x34, KEY_SWITCHVIDEOMODE}, {KE_KEY, 0x40, KEY_PREVIOUSSONG}, {KE_KEY, 0x41, KEY_NEXTSONG}, - {KE_KEY, 0x43, KEY_STOP}, + {KE_KEY, 0x43, KEY_STOPCD}, {KE_KEY, 0x45, KEY_PLAYPAUSE}, {KE_KEY, 0x50, KEY_EMAIL}, {KE_KEY, 0x51, KEY_WWW}, - {KE_KEY, 0x5C, BTN_EXTRA}, /* Performance */ + {KE_KEY, 0x5C, KEY_SCREENLOCK}, /* Screenlock */ {KE_KEY, 0x5D, KEY_WLAN}, {KE_KEY, 0x61, KEY_SWITCHVIDEOMODE}, {KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */ {KE_KEY, 0x82, KEY_CAMERA}, - {KE_KEY, 0x8A, KEY_TV}, + {KE_KEY, 0x8A, KEY_PROG1}, {KE_KEY, 0x95, KEY_MEDIA}, {KE_KEY, 0x99, KEY_PHONE}, {KE_END, 0}, From bd32005e126a465deda5d046a62f6bb842f4d9cf Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 27 Apr 2009 09:23:43 +0200 Subject: [PATCH 248/670] eeepc-laptop: unregister_rfkill_notifier on failure If there is a failure during eeepc_hotk_add() we need to remove the acpi_notify_handler. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 7aaf5879f666..353a898c3693 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -748,6 +748,8 @@ static int eeepc_hotk_add(struct acpi_device *device) wlan_fail: if (ehotk->eeepc_wlan_rfkill) rfkill_free(ehotk->eeepc_wlan_rfkill); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); ehotk_fail: kfree(ehotk); ehotk = NULL; From 5a641bcd6398841cc4606b0a732d41a09256fd94 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 14 May 2009 08:49:13 -0700 Subject: [PATCH 249/670] ALSA: pcsp: fix printk format warning Fix printk format warning: sound/drivers/pcsp/pcsp_mixer.c:54: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai --- sound/drivers/pcsp/pcsp_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c index caeb0f57fcca..771955a9be71 100644 --- a/sound/drivers/pcsp/pcsp_mixer.c +++ b/sound/drivers/pcsp/pcsp_mixer.c @@ -50,7 +50,7 @@ static int pcsp_treble_info(struct snd_kcontrol *kcontrol, uinfo->value.enumerated.items = chip->max_treble + 1; if (uinfo->value.enumerated.item > chip->max_treble) uinfo->value.enumerated.item = chip->max_treble; - sprintf(uinfo->value.enumerated.name, "%d", + sprintf(uinfo->value.enumerated.name, "%lu", PCSP_CALC_RATE(uinfo->value.enumerated.item)); return 0; } From be687518781f5aed86bcc152023b9fcb4d5c6b50 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 14 May 2009 10:23:09 -0600 Subject: [PATCH 250/670] powerpc/boot: add simpleImage.* to clean-files list Signed-off-by: Grant Likely --- arch/powerpc/boot/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4458abb67c51..bff7f127ce1b 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -367,7 +367,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ zImage.iseries zImage.miboot zImage.pmac zImage.pseries \ - otheros.bld *.dtb + simpleImage.* otheros.bld *.dtb # clean up files cached by wrapper clean-kernel := vmlinux.strip vmlinux.bin From 514a30d95f3277b9abed6044272ea97431bb9658 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 14 May 2009 10:23:10 -0600 Subject: [PATCH 251/670] powerpc/virtex: Add uImage to the default images list It is common to use U-Boot on Xilinx Virtex platforms. This patch ensures that CONFIG_DEFAULT_UIMAGE is selected for virtex Signed-off-by: Grant Likely --- arch/powerpc/platforms/40x/Kconfig | 1 + arch/powerpc/platforms/44x/Kconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 14e027f5be66..f39c953d5353 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -153,6 +153,7 @@ config 405GPR config XILINX_VIRTEX bool + select DEFAULT_UIMAGE config XILINX_VIRTEX_II_PRO bool diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index bf5c7ff2e6e5..0d83a6a0397d 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -246,6 +246,7 @@ config IBM440EP_ERR42 # Xilinx specific config options. config XILINX_VIRTEX bool + select DEFAULT_UIMAGE # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above config XILINX_VIRTEX_5_FXT From ba10eedf5a3fba991563873d4cb65a067aa13f24 Mon Sep 17 00:00:00 2001 From: John Linn Date: Thu, 14 May 2009 10:23:11 -0600 Subject: [PATCH 252/670] powerpc/virtex: Fix duplicate level irq events. The interrupt controller was not handling level interrupts correctly such that duplicate interrupts were happening. This fixes the problem and adds edge type interrupts which are needed in Xilinx hardware. Signed-off-by: John Linn Signed-off-by: Grant Likely --- arch/powerpc/sysdev/xilinx_intc.c | 117 +++++++++++++++++++++++++++--- 1 file changed, 107 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index a22e1a2df1af..c658b413c9b4 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -41,8 +41,32 @@ static struct irq_host *master_irqhost; +#define XILINX_INTC_MAXIRQS (32) + +/* The following table allows the interrupt type, edge or level, + * to be cached after being read from the device tree until the interrupt + * is mapped + */ +static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS]; + +/* Map the interrupt type from the device tree to the interrupt types + * used by the interrupt subsystem + */ +static unsigned char xilinx_intc_map_senses[] = { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_LEVEL_LOW, +}; + /* - * IRQ Chip operations + * The interrupt controller is setup such that it doesn't work well with + * the level interrupt handler in the kernel because the handler acks the + * interrupt before calling the application interrupt handler. To deal with + * that, we use 2 different irq chips so that different functions can be + * used for level and edge type interrupts. + * + * IRQ Chip common (across level and edge) operations */ static void xilinx_intc_mask(unsigned int virq) { @@ -52,15 +76,54 @@ static void xilinx_intc_mask(unsigned int virq) out_be32(regs + XINTC_CIE, 1 << irq); } -static void xilinx_intc_unmask(unsigned int virq) +static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type) +{ + struct irq_desc *desc = get_irq_desc(virq); + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + desc->status |= IRQ_LEVEL; + return 0; +} + +/* + * IRQ Chip level operations + */ +static void xilinx_intc_level_unmask(unsigned int virq) { int irq = virq_to_hw(virq); void * regs = get_irq_chip_data(virq); pr_debug("unmask: %d\n", irq); out_be32(regs + XINTC_SIE, 1 << irq); + + /* ack level irqs because they can't be acked during + * ack function since the handle_level_irq function + * acks the irq before calling the inerrupt handler + */ + out_be32(regs + XINTC_IAR, 1 << irq); } -static void xilinx_intc_ack(unsigned int virq) +static struct irq_chip xilinx_intc_level_irqchip = { + .typename = "Xilinx Level INTC", + .mask = xilinx_intc_mask, + .mask_ack = xilinx_intc_mask, + .unmask = xilinx_intc_level_unmask, + .set_type = xilinx_intc_set_type, +}; + +/* + * IRQ Chip edge operations + */ +static void xilinx_intc_edge_unmask(unsigned int virq) +{ + int irq = virq_to_hw(virq); + void *regs = get_irq_chip_data(virq); + pr_debug("unmask: %d\n", irq); + out_be32(regs + XINTC_SIE, 1 << irq); +} + +static void xilinx_intc_edge_ack(unsigned int virq) { int irq = virq_to_hw(virq); void * regs = get_irq_chip_data(virq); @@ -68,27 +131,60 @@ static void xilinx_intc_ack(unsigned int virq) out_be32(regs + XINTC_IAR, 1 << irq); } -static struct irq_chip xilinx_intc_irqchip = { - .typename = "Xilinx INTC", +static struct irq_chip xilinx_intc_edge_irqchip = { + .typename = "Xilinx Edge INTC", .mask = xilinx_intc_mask, - .unmask = xilinx_intc_unmask, - .ack = xilinx_intc_ack, + .unmask = xilinx_intc_edge_unmask, + .ack = xilinx_intc_edge_ack, + .set_type = xilinx_intc_set_type, }; /* * IRQ Host operations */ + +/** + * xilinx_intc_xlate - translate virq# from device tree interrupts property + */ +static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, + unsigned int *out_flags) +{ + if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS)) + return -EINVAL; + + /* keep a copy of the interrupt type til the interrupt is mapped + */ + xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]]; + + /* Xilinx uses 2 interrupt entries, the 1st being the h/w + * interrupt number, the 2nd being the interrupt type, edge or level + */ + *out_hwirq = intspec[0]; + *out_flags = xilinx_intc_map_senses[intspec[1]]; + + return 0; +} static int xilinx_intc_map(struct irq_host *h, unsigned int virq, irq_hw_number_t irq) { set_irq_chip_data(virq, h->host_data); - set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq); - set_irq_type(virq, IRQ_TYPE_NONE); + + if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH || + xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) { + set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip, + handle_level_irq); + } else { + set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip, + handle_edge_irq); + } return 0; } static struct irq_host_ops xilinx_intc_ops = { .map = xilinx_intc_map, + .xlate = xilinx_intc_xlate, }; struct irq_host * __init @@ -116,7 +212,8 @@ xilinx_intc_init(struct device_node *np) out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */ /* Allocate and initialize an irq_host structure. */ - irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1); + irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS, + &xilinx_intc_ops, -1); if (!irq) panic(__FILE__ ": Cannot allocate IRQ host\n"); irq->host_data = regs; From 29321357ac6db54eeb8574da1f6c3e0ce8cfbb60 Mon Sep 17 00:00:00 2001 From: Vladimir Zajac Date: Wed, 6 May 2009 19:34:21 +0200 Subject: [PATCH 253/670] thermal: fix off-by-1 error in trip point trigger condition This patch fixes a regression caused by commit b1569e99c795bf83b4ddf41c4f1c42761ab7f75e "ACPI: move thermal trip handling to generic thermal layer" which accidentally changed trip point trigger condition to temp > trip_temp This patch changes the trigger condition back to temp >= trip_temp Signed-off-by: Vladimir Zajac Acked-by: Zhang Rui Acked-by: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/thermal/thermal_sys.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index d0b093b66adc..5e38ba10a3a9 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -961,7 +961,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) switch (trip_type) { case THERMAL_TRIP_CRITICAL: - if (temp > trip_temp) { + if (temp >= trip_temp) { if (tz->ops->notify) ret = tz->ops->notify(tz, count, trip_type); @@ -974,7 +974,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) } break; case THERMAL_TRIP_HOT: - if (temp > trip_temp) + if (temp >= trip_temp) if (tz->ops->notify) tz->ops->notify(tz, count, trip_type); break; @@ -986,14 +986,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) cdev = instance->cdev; - if (temp > trip_temp) + if (temp >= trip_temp) cdev->ops->set_cur_state(cdev, 1); else cdev->ops->set_cur_state(cdev, 0); } break; case THERMAL_TRIP_PASSIVE: - if (temp > trip_temp || tz->passive) + if (temp >= trip_temp || tz->passive) thermal_zone_device_passive(tz, temp, trip_temp, count); break; From 2757495c906113896b378bf084708846273c87b2 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 14 May 2009 13:10:02 -0400 Subject: [PATCH 254/670] Btrfs: init inode ordered_data_close flag properly This flag is used to decide when we need to send a given file through the ordered code to make sure it is fully written before a transaction commits. It was not being properly set to zero when the inode was being setup. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 90c23eb28829..22450bd972df 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3122,6 +3122,7 @@ static noinline void init_btrfs_i(struct inode *inode) bi->flags = 0; bi->index_cnt = (u64)-1; bi->last_unlink_trans = 0; + bi->ordered_data_close = 0; extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS); extent_io_tree_init(&BTRFS_I(inode)->io_tree, inode->i_mapping, GFP_NOFS); From 76a05b35a320e8c968d0fec8f512a1acae227309 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 14 May 2009 13:24:30 -0400 Subject: [PATCH 255/670] Btrfs: Don't loop forever on metadata IO failures When a btrfs metadata read fails, the first thing we try to do is find a good copy on another mirror of the block. If this fails, read_tree_block() ends up returning a buffer that isn't up to date. The btrfs btree reading code was reworked to drop locks and repeat the search when IO was done, but the changes didn't add a check for failed reads. The end result was looping forever on buffers that were never going to become up to date. Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 39 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 36 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index a99f1c2a710d..fedf8b9f03a2 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1469,6 +1469,7 @@ read_block_for_search(struct btrfs_trans_handle *trans, u32 blocksize; struct extent_buffer *b = *eb_ret; struct extent_buffer *tmp; + int ret; blocknr = btrfs_node_blockptr(b, slot); gen = btrfs_node_ptr_generation(b, slot); @@ -1476,6 +1477,10 @@ read_block_for_search(struct btrfs_trans_handle *trans, tmp = btrfs_find_tree_block(root, blocknr, blocksize); if (tmp && btrfs_buffer_uptodate(tmp, gen)) { + /* + * we found an up to date block without sleeping, return + * right away + */ *eb_ret = tmp; return 0; } @@ -1483,7 +1488,9 @@ read_block_for_search(struct btrfs_trans_handle *trans, /* * reduce lock contention at high levels * of the btree by dropping locks before - * we read. + * we read. Don't release the lock on the current + * level because we need to walk this node to figure + * out which blocks to read. */ btrfs_unlock_up_safe(p, level + 1); btrfs_set_path_blocking(p); @@ -1494,10 +1501,21 @@ read_block_for_search(struct btrfs_trans_handle *trans, reada_for_search(root, p, level, slot, key->objectid); btrfs_release_path(NULL, p); + + ret = -EAGAIN; tmp = read_tree_block(root, blocknr, blocksize, gen); - if (tmp) + if (tmp) { + /* + * If the read above didn't mark this buffer up to date, + * it will never end up being up to date. Set ret to EIO now + * and give up so that our caller doesn't loop forever + * on our EAGAINs. + */ + if (!btrfs_buffer_uptodate(tmp, 0)) + ret = -EIO; free_extent_buffer(tmp); - return -EAGAIN; + } + return ret; } /* @@ -1696,6 +1714,9 @@ cow_done: if (ret == -EAGAIN) goto again; + if (ret == -EIO) + goto done; + if (!p->skip_locking) { int lret; @@ -1738,6 +1759,8 @@ done: */ if (!p->leave_spinning) btrfs_set_path_blocking(p); + if (ret < 0) + btrfs_release_path(root, p); return ret; } @@ -4212,6 +4235,11 @@ again: if (ret == -EAGAIN) goto again; + if (ret < 0) { + btrfs_release_path(root, path); + goto done; + } + if (!path->skip_locking) { ret = btrfs_try_spin_lock(next); if (!ret) { @@ -4246,6 +4274,11 @@ again: if (ret == -EAGAIN) goto again; + if (ret < 0) { + btrfs_release_path(root, path); + goto done; + } + if (!path->skip_locking) { btrfs_assert_tree_locked(path->nodes[level]); ret = btrfs_try_spin_lock(next); From cc7b0c9b701a079016183f3546b4d720194b367f Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 14 May 2009 13:31:21 -0400 Subject: [PATCH 256/670] Btrfs: remove some WARN_ONs in the IO failure path These debugging WARN_ONs make too much console noise during regular IO failures. An IO failure will still generate a number of messages as we verify checksums etc, but these two are not needed. Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 2 -- fs/btrfs/inode.c | 1 - 2 files changed, 3 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 0ff16d3331da..4b0ea0b80c23 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -848,8 +848,6 @@ struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr, if (ret == 0) set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags); - else - WARN_ON(1); return buf; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 22450bd972df..1c8b0190d031 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4296,7 +4296,6 @@ out: } if (err) { free_extent_map(em); - WARN_ON(1); return ERR_PTR(err); } return em; From 5d847a8ed970d17e2734ff9e07a74fe36cceb24e Mon Sep 17 00:00:00 2001 From: Li Hong Date: Thu, 14 May 2009 13:52:21 -0400 Subject: [PATCH 257/670] Btrfs: remove outdated comment in btrfs_ioctl_resize() In Li Zefan's commit dae7b665cf6d6e6e733f1c9c16cf55547dd37e33, a combination call of kmalloc() and copy_from_user() is replaced by memdup_user(). So btrfs_ioctl_resize() doesn't use GFP_NOFS any more. Signed-off-by: Li Hong Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 48762aa1e945..db84aa48ab7a 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -437,10 +437,6 @@ out_unlock: return 0; } -/* - * Called inside transaction, so use GFP_NOFS - */ - static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg) { u64 new_size; From 6b65c5c61bf86086817a5ed786c8f45755ac83b3 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Thu, 14 May 2009 13:52:21 -0400 Subject: [PATCH 258/670] Btrfs: make show_options result match actual option names The notreelog and flushoncommit mount options were being printed slightly differently. Signed-off-by: Sage Weil Signed-off-by: Chris Mason --- fs/btrfs/super.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index bf0e84c75607..e99510bfbffd 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -436,9 +436,9 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs) if (btrfs_test_opt(root, SSD)) seq_puts(seq, ",ssd"); if (btrfs_test_opt(root, NOTREELOG)) - seq_puts(seq, ",no-treelog"); + seq_puts(seq, ",notreelog"); if (btrfs_test_opt(root, FLUSHONCOMMIT)) - seq_puts(seq, ",flush-on-commit"); + seq_puts(seq, ",flushoncommit"); if (!(root->fs_info->sb->s_flags & MS_POSIXACL)) seq_puts(seq, ",noacl"); return 0; From 9f55684c2d9869e8cc53595a3fee679958511cfb Mon Sep 17 00:00:00 2001 From: Sankar P Date: Thu, 14 May 2009 13:52:22 -0400 Subject: [PATCH 259/670] Btrfs: Spelling fix in btrfs_lookup_first_block_group comments Signed-off-by: Sankar P Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index e4966444811b..3e2c7c738f23 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -312,7 +312,7 @@ btrfs_lookup_first_block_group(struct btrfs_fs_info *info, u64 bytenr) } /* - * return the block group that contains teh given bytenr + * return the block group that contains the given bytenr */ struct btrfs_block_group_cache *btrfs_lookup_block_group( struct btrfs_fs_info *info, From 2a8964d63d50dd2d65d71d342bc7fb6ef4117614 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 14 May 2009 17:05:39 -0400 Subject: [PATCH 260/670] ext4: Clear the unwritten buffer_head flag after the extent is initialized The BH_Unwritten flag indicates that the buffer is allocated on disk but has not been written; that is, the disk was part of a persistent preallocation area. That flag should only be set when a get_blocks() function is looking up a inode's logical to physical block mapping. When ext4_get_blocks_wrap() is called with create=1, the uninitialized extent is converted into an initialized one, so the BH_Unwritten flag is no longer appropriate. Hence, we need to make sure the BH_Unwritten is not left set, since the combination of BH_Mapped and BH_Unwritten is not allowed; among other things, it will result ext4's get_block() to be called over and over again during the write_begin phase of write(2). Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 0ac31a06422b..2a9ffd528dd1 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1149,6 +1149,7 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block, int retval; clear_buffer_mapped(bh); + clear_buffer_unwritten(bh); /* * Try to see if we can get the block without requesting @@ -1178,6 +1179,18 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block, if (retval > 0 && buffer_mapped(bh)) return retval; + /* + * When we call get_blocks without the create flag, the + * BH_Unwritten flag could have gotten set if the blocks + * requested were part of a uninitialized extent. We need to + * clear this flag now that we are committed to convert all or + * part of the uninitialized extent to be an initialized + * extent. This is because we need to avoid the combination + * of BH_Unwritten and BH_Mapped flags being simultaneously + * set on the buffer_head. + */ + clear_buffer_unwritten(bh); + /* * New blocks allocate and/or writing to uninitialized extent * will possibly result in updating i_data, so we take From c53a284f8be23735dc6b53929640a987055f2933 Mon Sep 17 00:00:00 2001 From: Edward Goggin Date: Thu, 9 Apr 2009 10:02:22 -0700 Subject: [PATCH 261/670] [SCSI] initialize max_target_blocked in scsi_alloc_target This patch initializes the max_target_blocked field of a scsi target structure so that a queuecommand return value of SCSI_MLQUEUE_TARGET_BUSY will actually result in having the scsi_queue_insert blocking the device queue before requeuing the command and running the queue. Otherwise, can and does cause livelock on single CPU configurations if/when open-iSCSI software initiator's command PDU window fills. Signed-off-by: Ed Goggin Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 6f51ca485f35..e2b50d8f57a8 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -425,6 +425,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, INIT_LIST_HEAD(&starget->devices); starget->state = STARGET_CREATED; starget->scsi_level = SCSI_2; + starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED; retry: spin_lock_irqsave(shost->host_lock, flags); From 13f4c435ebf2a7c150ffa714f3b23b8e4e8cb42f Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 12 May 2009 15:27:36 -0700 Subject: [PATCH 262/670] drm/i915: Don't allow binding objects into the last page of the aperture. This should avoid a class of bugs where the hardware prefetches past the end of the object, and walks into unallocated memory when the object is bound to the last page of the aperture. fd.o bug #21488 Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 051134c56aef..3133f991968d 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1011,8 +1011,16 @@ static int i915_load_modeset_init(struct drm_device *dev) /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); - /* Let GEM Manage from end of prealloc space to end of aperture */ - i915_gem_do_init(dev, prealloc_size, agp_size); + /* Let GEM Manage from end of prealloc space to end of aperture. + * + * However, leave one page at the end still bound to the scratch page. + * There are a number of places where the hardware apparently + * prefetches past the end of the object, and we've seen multiple + * hangs with the GPU head pointer stuck in a batchbuffer bound + * at the last page of the aperture. One page should be enough to + * keep any prefetching inside of the aperture. + */ + i915_gem_do_init(dev, prealloc_size, agp_size - 4096); ret = i915_gem_init_ringbuffer(dev); if (ret) From 0ba0e9e1f173a59ba402a253d356612c821b7a14 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 7 Apr 2009 11:02:28 +0800 Subject: [PATCH 263/670] drm/i915: workaround IGD i2c bus issue in kernel side (v2) In IGD, DPCUNIT_CLOCK_GATE_DISABLE bit should be set, otherwise i2c access will be wrong. v2: Disable CLOCK_GATE_DISABLE bit after bit bashing as suggested by Eric. Signed-off-by: Shaohua Li Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_drv.h | 2 +- drivers/gpu/drm/i915/intel_i2c.c | 17 +++++++++++++++++ drivers/gpu/drm/i915/intel_modes.c | 6 ++++++ 4 files changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 521194732266..15da44cf21b1 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -526,6 +526,7 @@ #define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) #define D_STATE 0x6104 #define CG_2D_DIS 0x6200 +#define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) #define CG_3D_DIS 0x6204 /* diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 957daef8edff..cf2943028936 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -109,7 +109,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, void intel_i2c_destroy(struct intel_i2c_chan *chan); int intel_ddc_get_modes(struct intel_output *intel_output); extern bool intel_ddc_probe(struct intel_output *intel_output); - +void intel_i2c_quirk_set(struct drm_device *dev, bool enable); extern void intel_crt_init(struct drm_device *dev); extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg); extern bool intel_sdvo_init(struct drm_device *dev, int output_device); diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index 5ee9d4c25753..f7061f68d050 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -34,6 +34,21 @@ #include "i915_drm.h" #include "i915_drv.h" +void intel_i2c_quirk_set(struct drm_device *dev, bool enable) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* When using bit bashing for I2C, this bit needs to be set to 1 */ + if (!IS_IGD(dev)) + return; + if (enable) + I915_WRITE(CG_2D_DIS, + I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE); + else + I915_WRITE(CG_2D_DIS, + I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE)); +} + /* * Intel GPIO access functions */ @@ -153,8 +168,10 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, goto out_free; /* JJJ: raise SCL and SDA? */ + intel_i2c_quirk_set(dev, true); set_data(chan, 1); set_clock(chan, 1); + intel_i2c_quirk_set(dev, false); udelay(20); return chan; diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c index 07d7ec976168..e0910fefce87 100644 --- a/drivers/gpu/drm/i915/intel_modes.c +++ b/drivers/gpu/drm/i915/intel_modes.c @@ -27,6 +27,7 @@ #include #include "drmP.h" #include "intel_drv.h" +#include "i915_drv.h" /** * intel_ddc_probe @@ -52,7 +53,10 @@ bool intel_ddc_probe(struct intel_output *intel_output) } }; + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2); + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); + if (ret == 2) return true; @@ -70,8 +74,10 @@ int intel_ddc_get_modes(struct intel_output *intel_output) struct edid *edid; int ret = 0; + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true); edid = drm_get_edid(&intel_output->base, &intel_output->ddc_bus->adapter); + intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false); if (edid) { drm_mode_connector_update_edid_property(&intel_output->base, edid); From 802c7eb646848d769a07704c16f7a3bbec9e5829 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 5 May 2009 16:03:48 -0700 Subject: [PATCH 264/670] drm/i915: sanity check IER at wait_request time We might sleep here anyway so I hope an extra uncached read is ok to add. In #20896 we found that vbetool clobbers the IER. In KMS mode this is particularly bad since we don't set the interrupt regs late (in EnterVT), so we'd fail to get *any* interrupts at all after X started (since some distros have scripts that call vbetool at X startup apparently). So this patch checks IER at wait_request time, and re-enables interrupts if it's been clobbered. In a proper config this check should never be triggered. This is really a distro issue, but having a sanity check is nice, as long as it doesn't have a real performance hit. Tested-by: Mateusz Kaduk Signed-off-by: Jesse Barnes [anholt: Moved the check inside of the sleeping case to avoid perf cost] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ee896d91c5bc..b189b49c7602 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1691,11 +1691,20 @@ static int i915_wait_request(struct drm_device *dev, uint32_t seqno) { drm_i915_private_t *dev_priv = dev->dev_private; + u32 ier; int ret = 0; BUG_ON(seqno == 0); if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) { + ier = I915_READ(IER); + if (!ier) { + DRM_ERROR("something (likely vbetool) disabled " + "interrupts, re-enabling\n"); + i915_driver_irq_preinstall(dev); + i915_driver_irq_postinstall(dev); + } + dev_priv->mm.waiting_gem_seqno = seqno; i915_user_irq_get(dev); ret = wait_event_interruptible(dev_priv->irq_queue, From 425d244c86700bdbc68d096c812336b6a5b9b4e9 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Tue, 5 May 2009 10:00:25 -0400 Subject: [PATCH 265/670] drm/i915: ignore LVDS on intel graphics systems that lie about having it There are a number of small form factor desktop systems with Intel mobile graphics chips that lie and say they have an LVDS. With kernel mode-setting, this becomes a problem, and makes native resolution boot go haywire -- for example, my Dell Studio Hybrid, hooked to a 1920x1080 display claims to have a 1024x768 LVDS, and the resulting graphical boot on the 1920x1080 display uses only the top left 1024x768, and auto-configured X will end up only 1024x768 as well. With this change, graphical boot and X both do 1920x1080 as expected. Note that we're simply embracing and extending the early bail-out code in place for the Mac Mini here. The xorg intel driver uses pci subsystem device and vendor id for matching, while we're using dmi lookups here. The MSI addition is courtesy of and tested by Bill Nottingham. Signed-off-by: Jarod Wilson Tested-by: Bill Nottingham Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_lvds.c | 54 ++++++++++++++++++++++++++----- 1 file changed, 46 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6619f26e46a5..439a86514993 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -384,7 +384,51 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = { .destroy = intel_lvds_enc_destroy, }; +static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident); + return 1; +} +/* These systems claim to have LVDS, but really don't */ +static const struct dmi_system_id __initdata intel_no_lvds[] = { + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Apple Mac Mini (Core series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Apple Mac Mini (Core 2 series)", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "MSI IM-945GSE-A", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "MSI"), + DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"), + }, + }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Dell Studio Hybrid", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"), + }, + }, + + /* FIXME: add a check for the Aopen Mini PC */ + + { } /* terminating entry */ +}; /** * intel_lvds_init - setup LVDS connectors on this device @@ -404,15 +448,9 @@ void intel_lvds_init(struct drm_device *dev) u32 lvds; int pipe; - /* Blacklist machines that we know falsely report LVDS. */ - /* FIXME: add a check for the Aopen Mini PC */ - - /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */ - if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") || - dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) { - DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n"); + /* Skip init on machines we know falsely report LVDS */ + if (dmi_check_system(intel_no_lvds)) return; - } intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL); if (!intel_output) { From e92597cffffabe9a9a85db462045330970c498d0 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 14:46:12 +0800 Subject: [PATCH 266/670] drm/i915: Use the GM45 VGA hotplug workaround on G45 as well. Although spec say CRT_HOTPLUG_ACTIVATION_PERIOD_64 is only useful for mobile platform, it is also required to detect vga on G4x desktops correctly. Tested on G45/G43/Q45 platforms with no regressions. It fixed freedesktop.org bug #21120 and part of bug #21210 Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 9bdd959260a5..19148c3df637 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -161,7 +161,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) hotplug_en &= CRT_FORCE_HOTPLUG_MASK; hotplug_en |= CRT_HOTPLUG_FORCE_DETECT; - if (IS_GM45(dev)) + if (IS_G4X(dev)) hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64; hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50; From c9ed4486bdee3b54cb544fc181057bc6bf1ae45c Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 15:08:27 +0800 Subject: [PATCH 267/670] drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS. It fixed bug #21659 Signed-off-by: Ma Ling [anholt: hand-applied because git-am is too picky] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index b47af07f3918..9b149fe824c3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -786,7 +786,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x2E22 || \ (dev)->pci_device == 0x2E32) -#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) +#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \ + (dev)->pci_device == 0x2A12) #define IS_GM45(dev) ((dev)->pci_device == 0x2A42) From 9d2949a4cdb77b9b5c243c79be6489d34d770c7c Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Mon, 11 May 2009 11:33:22 +0800 Subject: [PATCH 268/670] drm/i915: Set HDMI hot plug interrupt enable for only the output in question. We detect HDMI output connection status by writing to HOT Plug Interrupt Detect Enable bit in PORT_HOTPLUG_EN. The behavior will generate a specified interrupt, which is caught by audio driver, but during one detection driver set all Detect Enable bits of HDMIB, HDMIC HDMID, and generate wrong interrupt signals for current output, according to the signals audio driver misunderstand device status. The patch intends to handle corresponding output precisely. It fixed freedesktop.org bug #21371 Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_hdmi.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 550374225388..d0983bb93a18 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -155,11 +155,18 @@ intel_hdmi_detect(struct drm_connector *connector) temp = I915_READ(PORT_HOTPLUG_EN); - I915_WRITE(PORT_HOTPLUG_EN, - temp | - HDMIB_HOTPLUG_INT_EN | - HDMIC_HOTPLUG_INT_EN | - HDMID_HOTPLUG_INT_EN); + switch (hdmi_priv->sdvox_reg) { + case SDVOB: + temp |= HDMIB_HOTPLUG_INT_EN; + break; + case SDVOC: + temp |= HDMIC_HOTPLUG_INT_EN; + break; + default: + return connector_status_unknown; + } + + I915_WRITE(PORT_HOTPLUG_EN, temp); POSTING_READ(PORT_HOTPLUG_EN); From 08d7b3d1edff84bd673d9e9ab36b5aa62e1ba903 Mon Sep 17 00:00:00 2001 From: Carl Worth Date: Wed, 29 Apr 2009 14:43:54 -0700 Subject: [PATCH 269/670] drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl. This allows userlevel code to discover the pipe number corresponding to a given CRTC ID. This is necessary for doing pipe-specific operations such as waiting for vblank on a given CRTC. Failure to use the right pipe mapping can result in GPU hangs, or at least failure to actually sync to vblank. Signed-off-by: Carl Worth [anholt: Style touchups from review] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 1 + drivers/gpu/drm/i915/intel_display.c | 31 ++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 2 ++ include/drm/i915_drm.h | 10 +++++++++ 4 files changed, 44 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 3133f991968d..53d544552625 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1358,6 +1358,7 @@ struct drm_ioctl_desc i915_ioctls[] = { DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0), DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0), DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0), + DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0), }; int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bdcda36953b0..3387cf32f385 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1804,6 +1804,37 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) } } +int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, + struct drm_file *file_priv) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; + struct drm_crtc *crtc = NULL; + int pipe = -1; + + if (!dev_priv) { + DRM_ERROR("called with no initialization\n"); + return -EINVAL; + } + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + if (crtc->base.id == pipe_from_crtc_id->crtc_id) { + pipe = intel_crtc->pipe; + break; + } + } + + if (pipe == -1) { + DRM_ERROR("no such CRTC id\n"); + return -EINVAL; + } + + pipe_from_crtc_id->pipe = pipe; + + return 0; +} + struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe) { struct drm_crtc *crtc = NULL; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index cf2943028936..cd4b9c5f715e 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -125,6 +125,8 @@ extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector); extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, struct drm_crtc *crtc); +int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, + struct drm_file *file_priv); extern void intel_wait_for_vblank(struct drm_device *dev); extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe); extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output, diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 95962fa8398a..8e1e92583fbc 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -184,6 +184,7 @@ typedef struct _drm_i915_sarea { #define DRM_I915_GEM_GET_TILING 0x22 #define DRM_I915_GEM_GET_APERTURE 0x23 #define DRM_I915_GEM_MMAP_GTT 0x24 +#define DRM_I915_GET_PIPE_FROM_CRTC_ID 0x25 #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) #define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH) @@ -219,6 +220,7 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling) #define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling) #define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture) +#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id) /* Allow drivers to submit batchbuffers directly to hardware, relying * on the security mechanisms provided by hardware. @@ -657,4 +659,12 @@ struct drm_i915_gem_get_aperture { __u64 aper_available_size; }; +struct drm_i915_get_pipe_from_crtc_id { + /** ID of CRTC being requested **/ + __u32 crtc_id; + + /** pipe of requested CRTC **/ + __u32 pipe; +}; + #endif /* _I915_DRM_H_ */ From 4e5b6d006b61b6b998e15da850d959520f811b4c Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 14:02:32 -0700 Subject: [PATCH 270/670] wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_ws When the i2400m receives data and the device indicates there has to be reordering, we keep an sliding window implementation to sort the packets before sending them to the network stack. One of the "operations" that the device indicates is "queue a packet and update the window start". When the queue is empty, this is equivalent to "deliver the packet and update the window start". That case was optimized in i2400m_roq_queue_update_ws() so that we would not pointlessly queue and dequeue a packet. However, when the optimization was active, it wasn't updating the window start. That caused the reorder management code to get confused later on with what seemed to be wrong reorder requests from the device. Thus the fix implemented is to do the right thing and update the window start in both cases, when the queue is empty (and the optimization is done) and when not. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/rx.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 02419bfd64b5..f9fc38902322 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -819,10 +819,9 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, roq_data = (struct i2400m_roq_data *) &skb->cb; i2400m_net_erx(i2400m, skb, roq_data->cs); } - else { + else __i2400m_roq_queue(i2400m, roq, skb, sn, nsn); - __i2400m_roq_update_ws(i2400m, roq, sn + 1); - } + __i2400m_roq_update_ws(i2400m, roq, sn + 1); i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS, old_ws, len, sn, nsn, roq->ws); } From 93f1cc609c702a83e44da51cabdd353b20c24f79 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Thu, 30 Apr 2009 18:16:44 +0000 Subject: [PATCH 271/670] powerpc: Fix mktree build error on Mac OS X host The mktree utility defines some variables as "uint", although this is not a standard C type, and so cross-compiling on Mac OS X fails. Change this to "unsigned int". Signed-off-by: Timur Tabi Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/boot/mktree.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c index 45d06a8c7cd1..c2baae0a3d89 100644 --- a/arch/powerpc/boot/mktree.c +++ b/arch/powerpc/boot/mktree.c @@ -42,7 +42,7 @@ int main(int argc, char *argv[]) { int in_fd, out_fd; int nblks, i; - uint cksum, *cp; + unsigned int cksum, *cp; struct stat st; boot_block_t bt; @@ -90,7 +90,7 @@ int main(int argc, char *argv[]) cksum = 0; cp = (void *)&bt; - for (i=0; i Date: Wed, 6 May 2009 14:07:52 +0000 Subject: [PATCH 272/670] powerpc/iseries: Fix pci breakage due to bad dma_data initialization Commit 4fc665b88a79a45bae8bbf3a05563c27c7337c3d "powerpc: Merge 32 and 64-bit dma code" made changes to the PCI initialisation code that added an assignment to archdata.dma_data but only for 32 bit code. Commit 7eef440a545c7f812ed10b49d4a10a351df9cad6 "powerpc/pci: Cosmetic cleanups of pci-common.c" removed the conditional compilation. Unfortunately, the iSeries code setup the archdata.dma_data before that assignment was done - effectively overwriting the dma_data with NULL. Fix this up by moving the iSeries setup of dma_data into a pci_dma_dev_setup callback. Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/iseries/iommu.h | 4 ---- arch/powerpc/platforms/iseries/iommu.c | 6 +++++- arch/powerpc/platforms/iseries/pci.c | 1 - 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h index c59ee7e4bed1..1b9692c60899 100644 --- a/arch/powerpc/include/asm/iseries/iommu.h +++ b/arch/powerpc/include/asm/iseries/iommu.h @@ -26,10 +26,6 @@ struct vio_dev; struct device_node; struct iommu_table; -/* Creates table for an individual device node */ -extern void iommu_devnode_init_iSeries(struct pci_dev *pdev, - struct device_node *dn); - /* Get table parameters from HV */ extern void iommu_table_getparms_iSeries(unsigned long busno, unsigned char slotno, unsigned char virtbus, diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index ff43f1fd8343..40219823d9b0 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -174,9 +174,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl) } -void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn) +static void pci_dma_dev_setup_iseries(struct pci_dev *pdev) { struct iommu_table *tbl; + struct device_node *dn = pdev->sysdata; struct pci_dn *pdn = PCI_DN(dn); const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL); @@ -194,6 +195,8 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn) kfree(tbl); pdev->dev.archdata.dma_data = pdn->iommu_table; } +#else +#define pci_dma_dev_setup_iseries NULL #endif static struct iommu_table veth_iommu_table; @@ -251,5 +254,6 @@ void iommu_init_early_iSeries(void) ppc_md.tce_build = tce_build_iSeries; ppc_md.tce_free = tce_free_iSeries; + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries; set_pci_dma_ops(&dma_iommu_ops); } diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 02a634faedbe..21cddc30220b 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -444,7 +444,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev) pdev->sysdata = node; allocate_device_bars(pdev); iseries_device_information(pdev, bus, *sub_bus); - iommu_devnode_init_iSeries(pdev, node); } /* From e5fc948b11a9d0aee1cabe7c82726bc36d496875 Mon Sep 17 00:00:00 2001 From: Maynard Johnson Date: Thu, 7 May 2009 05:48:32 +0000 Subject: [PATCH 273/670] powerpc: Fix oprofile sampling of marked events on POWER7 Description ----------- Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on older processors where those bits are defined. Background ---------- The performance monitor unit of the 64-bit POWER processor family has the ability to collect accurate instruction-level samples when profiling on marked events (i.e., "PM_MRK_"). In processors prior to POWER6, the MMCRA register contained "slot information" that the oprofile kernel driver used to adjust the value latched in the SIAR at the time of a PMU interrupt. But as of POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use, since the SIAR itself holds the accurate sampled instruction address. With POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of these slot bits was, in effect, a NOP. But with POWER7, these bits are no longer zero'ed out; however, they serve some other purpose rather than slot information. Thus, using these bits on POWER7 to adjust the SIAR value results in samples being attributed to the wrong instructions. The attached patch changes the oprofile kernel driver to ignore these slot bits on all newer processors starting with POWER6. Signed-off-by: Maynard Johnson Signed-off-by: Michael Wolf Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/oprofile/op_model_power4.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 3e3d91f536e0..80774092db77 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -26,6 +26,7 @@ static unsigned long reset_value[OP_MAX_COUNTER]; static int oprofile_running; +static int use_slot_nums; /* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */ static u32 mmcr0_val; @@ -61,6 +62,12 @@ static int power4_reg_setup(struct op_counter_config *ctr, else mmcr0_val |= MMCR0_PROBLEM_DISABLE; + if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || + __is_processor(PV_970) || __is_processor(PV_970FX) || + __is_processor(PV_970MP) || __is_processor(PV_970GX) || + __is_processor(PV_POWER5) || __is_processor(PV_POWER5p)) + use_slot_nums = 1; + return 0; } @@ -206,7 +213,7 @@ static unsigned long get_pc(struct pt_regs *regs) mmcra = mfspr(SPRN_MMCRA); - if (mmcra & MMCRA_SAMPLE_ENABLE) { + if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) { slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT); if (slot > 1) pc += 4 * (slot - 1); From 31207dab7d2e63795eb15823947bd2f7025b08e2 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 8 May 2009 12:08:20 +0000 Subject: [PATCH 274/670] powerpc/mpic: Fix incorrect allocation of interrupt rev-map Before when we were setting up the irq host map for mpic we passed in just isu_size for the size of the linear map. However, for a number of mpic implementations we have no isu (thus pass in 0) and will end up with a no linear map (size = 0). This causes us to always call irq_find_mapping() from mpic_get_irq(). By moving the allocation of the host map to after we've determined the number of sources we can actually benefit from having a linear map for the non-isu users that covers all the interrupt sources. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpic.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 21b956701596..0efc12d1a3d7 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1057,13 +1057,6 @@ struct mpic * __init mpic_alloc(struct device_node *node, memset(mpic, 0, sizeof(struct mpic)); mpic->name = name; - mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, - isu_size, &mpic_host_ops, - flags & MPIC_LARGE_VECTORS ? 2048 : 256); - if (mpic->irqhost == NULL) - return NULL; - - mpic->irqhost->host_data = mpic; mpic->hc_irq = mpic_irq_chip; mpic->hc_irq.typename = name; if (flags & MPIC_PRIMARY) @@ -1213,6 +1206,15 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); mpic->isu_mask = (1 << mpic->isu_shift) - 1; + mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, + isu_size ? isu_size : mpic->num_sources, + &mpic_host_ops, + flags & MPIC_LARGE_VECTORS ? 2048 : 256); + if (mpic->irqhost == NULL) + return NULL; + + mpic->irqhost->host_data = mpic; + /* Display version */ switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) { case 1: From 49a849652513235a244dfbf5e58c54f796bd1148 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Fri, 8 May 2009 12:19:27 +0000 Subject: [PATCH 275/670] powerpc: Allow mem=x cmdline to work with 4G+ We're currently choking on mem=4g (and above) due to memory_limit being specified as an unsigned long. Make memory_limit phys_addr_t to fix this. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/system.h | 2 +- arch/powerpc/kernel/machine_kexec.c | 4 ++-- arch/powerpc/kernel/prom.c | 8 ++++---- arch/powerpc/mm/mem.c | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h index f612798e1c93..2b2420a49884 100644 --- a/arch/powerpc/include/asm/system.h +++ b/arch/powerpc/include/asm/system.h @@ -212,7 +212,7 @@ extern struct task_struct *_switch(struct thread_struct *prev, extern unsigned int rtas_data; extern int mem_init_done; /* set on boot once kmalloc can be called */ extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ -extern unsigned long memory_limit; +extern phys_addr_t memory_limit; extern unsigned long klimit; extern void *alloc_maybe_bootmem(size_t size, gfp_t mask); diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index d59e2b1bdcba..bb3d893a8353 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -125,8 +125,8 @@ void __init reserve_crashkernel(void) /* Crash kernel trumps memory limit */ if (memory_limit && memory_limit <= crashk_res.end) { memory_limit = crashk_res.end + 1; - printk("Adjusted memory limit for crashkernel, now 0x%lx\n", - memory_limit); + printk("Adjusted memory limit for crashkernel, now 0x%llx\n", + (unsigned long long)memory_limit); } printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 5ec6a9e23933..ce01ff2474da 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -426,7 +426,7 @@ static int __init early_parse_mem(char *p) return 1; memory_limit = PAGE_ALIGN(memparse(p, &p)); - DBG("memory limit = 0x%lx\n", memory_limit); + DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit); return 0; } @@ -1160,7 +1160,7 @@ static inline void __init phyp_dump_reserve_mem(void) {} void __init early_init_devtree(void *params) { - unsigned long limit; + phys_addr_t limit; DBG(" -> early_init_devtree(%p)\n", params); @@ -1204,7 +1204,7 @@ void __init early_init_devtree(void *params) limit = memory_limit; if (! limit) { - unsigned long memsize; + phys_addr_t memsize; /* Ensure that total memory size is page-aligned, because * otherwise mark_bootmem() gets upset. */ @@ -1218,7 +1218,7 @@ void __init early_init_devtree(void *params) lmb_analyze(); lmb_dump_all(); - DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); + DBG("Phys. mem: %llx\n", lmb_phys_mem_size()); /* We may need to relocate the flat tree, do it now. * FIXME .. and the initrd too? */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index f668fa9ba804..d0602a76bf7f 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -57,7 +57,7 @@ int init_bootmem_done; int mem_init_done; -unsigned long memory_limit; +phys_addr_t memory_limit; #ifdef CONFIG_HIGHMEM pte_t *kmap_pte; From 37cd8ed90fc5b11941110d2d0cea6807f86d4787 Mon Sep 17 00:00:00 2001 From: Gerhard Stenzel Date: Wed, 13 May 2009 05:50:46 +0000 Subject: [PATCH 276/670] powerpc/cell: Make ptcal more reliable There have been a series of checkstops on QS21 related to ptcal being set up incorrectly. On systems that only have memory on a single node, ptcal fails when it gets a pointer to memory on the remote node. Moreover, agressive prefetching in memcpy and other functions may accidentally touch the first cache line of the page that we reserve for ptcal, which causes an ECC checkstop. We now allocate pages only from the specified node, moves the ptcal area into the middle of the allocated page to avoid potential prefetch problems and prints the address of the ptcal area to facilitate diagnostics. Signed-off-by: Gerhard Stenzel Signed-off-by: Arnd Bergmann Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/cell/ras.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 5f961c464cc4..296b5268754e 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -122,12 +122,23 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) area->nid = nid; area->order = order; - area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order); + area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE, + area->order); - if (!area->pages) + if (!area->pages) { + printk(KERN_WARNING "%s: no page on node %d\n", + __func__, area->nid); goto out_free_area; + } - addr = __pa(page_address(area->pages)); + /* + * We move the ptcal area to the middle of the allocated + * page, in order to avoid prefetches in memcpy and similar + * functions stepping on it. + */ + addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1); + printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n", + __func__, area->nid, addr); ret = -EIO; if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid, From 951c4df5b7703137bf4eee002d98d083fbc890cc Mon Sep 17 00:00:00 2001 From: Benjamin Krill Date: Wed, 13 May 2009 05:56:54 +0000 Subject: [PATCH 277/670] serial/nwpserial: Fix wrong register read address and add interrupt acknowledge. The receive interrupt routine checks the wrong register if the receive fifo is empty. Further an explicit interrupt acknowledge write is introduced. In some circumstances another interrupt was issued. Signed-off-by: Benjamin Krill Signed-off-by: Arnd Bergmann Signed-off-by: Benjamin Herrenschmidt --- drivers/serial/nwpserial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c index 32f3eaf0d262..9e150b19d726 100644 --- a/drivers/serial/nwpserial.c +++ b/drivers/serial/nwpserial.c @@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id) ch = dcr_read(up->dcr_host, UART_RX); if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID) tty_insert_flip_char(tty, ch, TTY_NORMAL); - } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR); + } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR); tty_flip_buffer_push(tty); ret = IRQ_HANDLED; + /* clear interrupt */ + dcr_write(up->dcr_host, UART_IIR, 1); out: spin_unlock(&up->port.lock); return ret; From b173f03d7c48d3346541f26e0b29690dbadca279 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 14 May 2009 18:34:06 +0000 Subject: [PATCH 278/670] powerpc/pseries: Really fix the oprofile CPU type on pseries My previous pach for fixing the oprofile CPU type got somewhat mismerged (by my fault) when it collided with another related patch. This should finally (fingers crossed) fix the whole thing. We make sure we keep the -old- oprofile type and CPU type whenever one of them was specified in the first pass through the function. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index f9c40f869c6e..3e33fb933d99 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1836,7 +1836,7 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * and, in that case, keep the current value for * oprofile_cpu_type. */ - if (old.oprofile_cpu_type == NULL) { + if (old.oprofile_cpu_type != NULL) { t->oprofile_cpu_type = old.oprofile_cpu_type; t->oprofile_type = old.oprofile_type; } From ad892a63f64888a7b05eb2046febbcfbdd54dfcc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 14 May 2009 20:16:47 +0000 Subject: [PATCH 279/670] powerpc: Fix PCI ROM access A couple of issues crept in since about 2.6.27 related to accessing PCI device ROMs on various powerpc machines. First, historically, we don't allocate the ROM resource in the resource tree. I'm not entirely certain of why, I susepct they often contained garbage on x86 but it's hard to tell. This causes the current generic code to always call pci_assign_resource() when trying to access the said ROM from sysfs, which will try to re-assign some new address regardless of what the ROM BAR was already set to at boot time. This can be a problem on hypervisor platforms like pSeries where we aren't supposed to move PCI devices around (and in fact probably can't). Second, our code that generates the PCI tree from the OF device-tree (instead of doing config space probing) which we mostly use on pseries at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any resource. That means that any attempt at re-assigning such a resource with pci_assign_resource() would fail due to resource_alignment() returning 0. This fixes this by doing these two things: - The code that calculates resource flags based on the OF device-node is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at it also set IORESOURCE_READONLY for ROMs since we were lacking that too - We now allocate ROM resources as part of the resource tree. However to limit the chances of nasty conflicts due to busted firmwares, we only do it on the second pass of our two-passes allocation scheme, so that all valid and enabled BARs get precedence. This brings pSeries back the ability to access PCI ROMs via sysfs (and thus initialize various video cards from X etc...). Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 21 ++++++++++++++------- arch/powerpc/kernel/pci_64.c | 15 ++++++++++++--- 2 files changed, 26 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 9c69e7e145c5..4fee63cb53ff 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1366,12 +1366,17 @@ static void __init pcibios_allocate_resources(int pass) for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); - for (idx = 0; idx < 6; idx++) { + for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) { r = &dev->resource[idx]; if (r->parent) /* Already allocated */ continue; if (!r->flags || (r->flags & IORESOURCE_UNSET)) continue; /* Not assigned at all */ + /* We only allocate ROMs on pass 1 just in case they + * have been screwed up by firmware + */ + if (idx == PCI_ROM_RESOURCE ) + disabled = 1; if (r->flags & IORESOURCE_IO) disabled = !(command & PCI_COMMAND_IO); else @@ -1382,17 +1387,19 @@ static void __init pcibios_allocate_resources(int pass) if (pass) continue; r = &dev->resource[PCI_ROM_RESOURCE]; - if (r->flags & IORESOURCE_ROM_ENABLE) { + if (r->flags) { /* Turn the ROM off, leave the resource region, * but keep it unregistered. */ u32 reg; - pr_debug("PCI: Switching off ROM of %s\n", - pci_name(dev)); - r->flags &= ~IORESOURCE_ROM_ENABLE; pci_read_config_dword(dev, dev->rom_base_reg, ®); - pci_write_config_dword(dev, dev->rom_base_reg, - reg & ~PCI_ROM_ADDRESS_ENABLE); + if (reg & PCI_ROM_ADDRESS_ENABLE) { + pr_debug("PCI: Switching off ROM of %s\n", + pci_name(dev)); + r->flags &= ~IORESOURCE_ROM_ENABLE; + pci_write_config_dword(dev, dev->rom_base_reg, + reg & ~PCI_ROM_ADDRESS_ENABLE); + } } } } diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index be574fc0d92f..96edb6f8babb 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -64,7 +64,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def) return def; } -static unsigned int pci_parse_of_flags(u32 addr0) +static unsigned int pci_parse_of_flags(u32 addr0, int bridge) { unsigned int flags = 0; @@ -75,8 +75,17 @@ static unsigned int pci_parse_of_flags(u32 addr0) if (addr0 & 0x40000000) flags |= IORESOURCE_PREFETCH | PCI_BASE_ADDRESS_MEM_PREFETCH; + /* Note: We don't know whether the ROM has been left enabled + * by the firmware or not. We mark it as disabled (ie, we do + * not set the IORESOURCE_ROM_ENABLE flag) for now rather than + * do a config space read, it will be force-enabled if needed + */ + if (!bridge && (addr0 & 0xff) == 0x30) + flags |= IORESOURCE_READONLY; } else if (addr0 & 0x01000000) flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + if (flags) + flags |= IORESOURCE_SIZEALIGN; return flags; } @@ -95,7 +104,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) return; pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs); for (; proplen >= 20; proplen -= 20, addrs += 5) { - flags = pci_parse_of_flags(addrs[0]); + flags = pci_parse_of_flags(addrs[0], 0); if (!flags) continue; base = of_read_number(&addrs[1], 2); @@ -293,7 +302,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node, } i = 1; for (; len >= 32; len -= 32, ranges += 8) { - flags = pci_parse_of_flags(ranges[0]); + flags = pci_parse_of_flags(ranges[0], 1); size = of_read_number(&ranges[6], 2); if (flags == 0 || size == 0) continue; From 82075af6cb9b4918ab52a7100425b09fae6aafe3 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 14 May 2009 12:41:22 -0700 Subject: [PATCH 280/670] ASoC: davinci-pcm buildfixes This is a buildfix for the DaVinci PCM code, resyncing it with the version in the DaVinci tree. The notable change is using current EDMA interfaces, which recently merged to mainline. (The older interfaces never made it into mainline.) NOTE: open issue, the DMA should be to/from SRAM; see chip errata for more info. The artifacts are extremely easy to hear on DM355 hardware (not yet supported in mainline), but don't seem as audible on DM6446 hardwaare (which does have mainline support). Signed-off-by: David Brownell Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-pcm.c | 69 ++++++++++++++++++++------------- 1 file changed, 41 insertions(+), 28 deletions(-) diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c index 7af3b5b3a53d..a05996588489 100644 --- a/sound/soc/davinci/davinci-pcm.c +++ b/sound/soc/davinci/davinci-pcm.c @@ -22,6 +22,7 @@ #include #include +#include #include "davinci-pcm.h" @@ -51,7 +52,7 @@ struct davinci_runtime_data { spinlock_t lock; int period; /* current DMA period */ int master_lch; /* Master DMA channel */ - int slave_lch; /* Slave DMA channel */ + int slave_lch; /* linked parameter RAM reload slot */ struct davinci_pcm_dma_params *params; /* DMA params */ }; @@ -90,18 +91,18 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream) dst_bidx = data_type; } - davinci_set_dma_src_params(lch, src, INCR, W8BIT); - davinci_set_dma_dest_params(lch, dst, INCR, W8BIT); - davinci_set_dma_src_index(lch, src_bidx, 0); - davinci_set_dma_dest_index(lch, dst_bidx, 0); - davinci_set_dma_transfer_params(lch, data_type, count, 1, 0, ASYNC); + edma_set_src(lch, src, INCR, W8BIT); + edma_set_dest(lch, dst, INCR, W8BIT); + edma_set_src_index(lch, src_bidx, 0); + edma_set_dest_index(lch, dst_bidx, 0); + edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC); prtd->period++; if (unlikely(prtd->period >= runtime->periods)) prtd->period = 0; } -static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data) +static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data) { struct snd_pcm_substream *substream = data; struct davinci_runtime_data *prtd = substream->runtime->private_data; @@ -125,7 +126,7 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream) struct davinci_runtime_data *prtd = substream->runtime->private_data; struct snd_soc_pcm_runtime *rtd = substream->private_data; struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data; - int tcc = TCC_ANY; + struct edmacc_param p_ram; int ret; if (!dma_data) @@ -134,22 +135,34 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream) prtd->params = dma_data; /* Request master DMA channel */ - ret = davinci_request_dma(prtd->params->channel, prtd->params->name, + ret = edma_alloc_channel(prtd->params->channel, davinci_pcm_dma_irq, substream, - &prtd->master_lch, &tcc, EVENTQ_0); - if (ret) + EVENTQ_0); + if (ret < 0) return ret; + prtd->master_lch = ret; - /* Request slave DMA channel */ - ret = davinci_request_dma(PARAM_ANY, "Link", - NULL, NULL, &prtd->slave_lch, &tcc, EVENTQ_0); - if (ret) { - davinci_free_dma(prtd->master_lch); + /* Request parameter RAM reload slot */ + ret = edma_alloc_slot(EDMA_SLOT_ANY); + if (ret < 0) { + edma_free_channel(prtd->master_lch); return ret; } + prtd->slave_lch = ret; - /* Link slave DMA channel in loopback */ - davinci_dma_link_lch(prtd->slave_lch, prtd->slave_lch); + /* Issue transfer completion IRQ when the channel completes a + * transfer, then always reload from the same slot (by a kind + * of loopback link). The completion IRQ handler will update + * the reload slot with a new buffer. + * + * REVISIT save p_ram here after setting up everything except + * the buffer and its length (ccnt) ... use it as a template + * so davinci_pcm_enqueue_dma() takes less time in IRQ. + */ + edma_read_slot(prtd->slave_lch, &p_ram); + p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch); + p_ram.link_bcntrld = prtd->slave_lch << 5; + edma_write_slot(prtd->slave_lch, &p_ram); return 0; } @@ -165,12 +178,12 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - davinci_start_dma(prtd->master_lch); + edma_start(prtd->master_lch); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - davinci_stop_dma(prtd->master_lch); + edma_stop(prtd->master_lch); break; default: ret = -EINVAL; @@ -185,14 +198,14 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd) static int davinci_pcm_prepare(struct snd_pcm_substream *substream) { struct davinci_runtime_data *prtd = substream->runtime->private_data; - struct paramentry_descriptor temp; + struct edmacc_param temp; prtd->period = 0; davinci_pcm_enqueue_dma(substream); - /* Get slave channel dma params for master channel startup */ - davinci_get_dma_params(prtd->slave_lch, &temp); - davinci_set_dma_params(prtd->master_lch, &temp); + /* Copy self-linked parameter RAM entry into master channel */ + edma_read_slot(prtd->slave_lch, &temp); + edma_write_slot(prtd->master_lch, &temp); return 0; } @@ -208,7 +221,7 @@ davinci_pcm_pointer(struct snd_pcm_substream *substream) spin_lock(&prtd->lock); - davinci_dma_getposition(prtd->master_lch, &src, &dst); + edma_get_position(prtd->master_lch, &src, &dst); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) count = src - runtime->dma_addr; else @@ -253,10 +266,10 @@ static int davinci_pcm_close(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct davinci_runtime_data *prtd = runtime->private_data; - davinci_dma_unlink_lch(prtd->slave_lch, prtd->slave_lch); + edma_unlink(prtd->slave_lch); - davinci_free_dma(prtd->slave_lch); - davinci_free_dma(prtd->master_lch); + edma_free_slot(prtd->slave_lch); + edma_free_channel(prtd->master_lch); kfree(prtd); From a62114cb90a351016121bca02e69d6a9e24afa0e Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 14 May 2009 12:47:42 -0700 Subject: [PATCH 281/670] ASoC: DaVinci I2S updates This resyncs the DaVinci I2S code with the version in the DaVinci tree. The behavioral change uses updated clock interfaces which recently merged to mainline. Two other changes include adding a comment on the ASP/McBSP/McASP confusion, and dropping pdev->id in order to support more boards than just the DM644x EVM. Signed-off-by: David Brownell Signed-off-by: Mark Brown --- sound/soc/davinci/davinci-i2s.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c index ffdb9439d3d8..b1ea52fc83c7 100644 --- a/sound/soc/davinci/davinci-i2s.c +++ b/sound/soc/davinci/davinci-i2s.c @@ -24,6 +24,26 @@ #include "davinci-pcm.h" + +/* + * NOTE: terminology here is confusing. + * + * - This driver supports the "Audio Serial Port" (ASP), + * found on dm6446, dm355, and other DaVinci chips. + * + * - But it labels it a "Multi-channel Buffered Serial Port" + * (McBSP) as on older chips like the dm642 ... which was + * backward-compatible, possibly explaining that confusion. + * + * - OMAP chips have a controller called McBSP, which is + * incompatible with the DaVinci flavor of McBSP. + * + * - Newer DaVinci chips have a controller called McASP, + * incompatible with ASP and with either McBSP. + * + * In short: this uses ASP to implement I2S, not McBSP. + * And it won't be the only DaVinci implemention of I2S. + */ #define DAVINCI_MCBSP_DRR_REG 0x00 #define DAVINCI_MCBSP_DXR_REG 0x04 #define DAVINCI_MCBSP_SPCR_REG 0x08 @@ -421,7 +441,7 @@ static int davinci_i2s_probe(struct platform_device *pdev, { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_card *card = socdev->card; - struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai; + struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai; struct davinci_mcbsp_dev *dev; struct resource *mem, *ioarea; struct evm_snd_platform_data *pdata; @@ -448,7 +468,7 @@ static int davinci_i2s_probe(struct platform_device *pdev, cpu_dai->private_data = dev; - dev->clk = clk_get(&pdev->dev, "McBSPCLK"); + dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { ret = -ENODEV; goto err_free_mem; @@ -483,7 +503,7 @@ static void davinci_i2s_remove(struct platform_device *pdev, { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_card *card = socdev->card; - struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai; + struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai; struct davinci_mcbsp_dev *dev = cpu_dai->private_data; struct resource *mem; From f492ec9f02908579353e31949855f86909a5af14 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 14 May 2009 13:01:59 -0700 Subject: [PATCH 282/670] ASoC: DaVinci EVM board support buildfixes This is a build fix, resyncing the DaVinci EVM ASoC board code with the version in the DaVinci tree. That resync includes support for the DM355 EVM, although that board isn't yet in mainline. (NOTE: also includes a bugfix to the platform_add_resources call, recently sent by Chaithrika U S but not yet merged into the DaVinci tree.) Signed-off-by: David Brownell Signed-off-by: Mark Brown --- arch/arm/mach-davinci/include/mach/asp.h | 25 ++++++++++ sound/soc/davinci/Kconfig | 7 +-- sound/soc/davinci/davinci-evm.c | 63 +++++++++++++++++++----- 3 files changed, 81 insertions(+), 14 deletions(-) create mode 100644 arch/arm/mach-davinci/include/mach/asp.h diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h new file mode 100644 index 000000000000..e0abc437d796 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/asp.h @@ -0,0 +1,25 @@ +/* + * - DaVinci Audio Serial Port support + */ +#ifndef __ASM_ARCH_DAVINCI_ASP_H +#define __ASM_ARCH_DAVINCI_ASP_H + +#include + +/* Bases of register banks */ +#define DAVINCI_ASP0_BASE 0x01E02000 +#define DAVINCI_ASP1_BASE 0x01E04000 + +/* EDMA channels */ +#define DAVINCI_DMA_ASP0_TX 2 +#define DAVINCI_DMA_ASP0_RX 3 +#define DAVINCI_DMA_ASP1_TX 8 +#define DAVINCI_DMA_ASP1_RX 9 + +/* Interrupts */ +#define DAVINCI_ASP0_RX_INT IRQ_MBRINT +#define DAVINCI_ASP0_TX_INT IRQ_MBXINT +#define DAVINCI_ASP1_RX_INT IRQ_MBRINT +#define DAVINCI_ASP1_TX_INT IRQ_MBXINT + +#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig index bd7392c9657e..411a710be660 100644 --- a/sound/soc/davinci/Kconfig +++ b/sound/soc/davinci/Kconfig @@ -10,13 +10,14 @@ config SND_DAVINCI_SOC_I2S tristate config SND_DAVINCI_SOC_EVM - tristate "SoC Audio support for DaVinci EVM" - depends on SND_DAVINCI_SOC && MACH_DAVINCI_EVM + tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM" + depends on SND_DAVINCI_SOC + depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM select SND_DAVINCI_SOC_I2S select SND_SOC_TLV320AIC3X help Say Y if you want to add support for SoC audio on TI - DaVinci EVM platform. + DaVinci DM6446 or DM355 EVM platforms. config SND_DAVINCI_SOC_SFFSDR tristate "SoC Audio support for SFFSDR" diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 9b90b347007c..58fd1cbedd88 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -20,7 +20,11 @@ #include #include -#include +#include + +#include +#include +#include #include "../codecs/tlv320aic3x.h" #include "davinci-pcm.h" @@ -150,7 +154,7 @@ static struct snd_soc_card snd_soc_card_evm = { /* evm audio private data */ static struct aic3x_setup_data evm_aic3x_setup = { - .i2c_bus = 0, + .i2c_bus = 1, .i2c_address = 0x1b, }; @@ -161,36 +165,73 @@ static struct snd_soc_device evm_snd_devdata = { .codec_data = &evm_aic3x_setup, }; +/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */ static struct resource evm_snd_resources[] = { { - .start = DAVINCI_MCBSP_BASE, - .end = DAVINCI_MCBSP_BASE + SZ_8K - 1, + .start = DAVINCI_ASP0_BASE, + .end = DAVINCI_ASP0_BASE + SZ_8K - 1, .flags = IORESOURCE_MEM, }, }; static struct evm_snd_platform_data evm_snd_data = { - .tx_dma_ch = DM644X_DMACH_MCBSP_TX, - .rx_dma_ch = DM644X_DMACH_MCBSP_RX, + .tx_dma_ch = DAVINCI_DMA_ASP0_TX, + .rx_dma_ch = DAVINCI_DMA_ASP0_RX, +}; + +/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */ +static struct resource dm335evm_snd_resources[] = { + { + .start = DAVINCI_ASP1_BASE, + .end = DAVINCI_ASP1_BASE + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct evm_snd_platform_data dm335evm_snd_data = { + .tx_dma_ch = DAVINCI_DMA_ASP1_TX, + .rx_dma_ch = DAVINCI_DMA_ASP1_RX, }; static struct platform_device *evm_snd_device; static int __init evm_init(void) { + struct resource *resources; + unsigned num_resources; + struct evm_snd_platform_data *data; + int index; int ret; - evm_snd_device = platform_device_alloc("soc-audio", 0); + if (machine_is_davinci_evm()) { + davinci_cfg_reg(DM644X_MCBSP); + + resources = evm_snd_resources; + num_resources = ARRAY_SIZE(evm_snd_resources); + data = &evm_snd_data; + index = 0; + } else if (machine_is_davinci_dm355_evm()) { + /* we don't use ASP1 IRQs, or we'd need to mux them ... */ + davinci_cfg_reg(DM355_EVT8_ASP1_TX); + davinci_cfg_reg(DM355_EVT9_ASP1_RX); + + resources = dm335evm_snd_resources; + num_resources = ARRAY_SIZE(dm335evm_snd_resources); + data = &dm335evm_snd_data; + index = 1; + } else + return -EINVAL; + + evm_snd_device = platform_device_alloc("soc-audio", index); if (!evm_snd_device) return -ENOMEM; platform_set_drvdata(evm_snd_device, &evm_snd_devdata); evm_snd_devdata.dev = &evm_snd_device->dev; - platform_device_add_data(evm_snd_device, &evm_snd_data, - sizeof(evm_snd_data)); + platform_device_add_data(evm_snd_device, data, sizeof(*data)); - ret = platform_device_add_resources(evm_snd_device, evm_snd_resources, - ARRAY_SIZE(evm_snd_resources)); + ret = platform_device_add_resources(evm_snd_device, resources, + num_resources); if (ret) { platform_device_put(evm_snd_device); return ret; From cd17cbfda004fe5f406c01b318c6378d9895896f Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 15 May 2009 11:32:24 +0200 Subject: [PATCH 283/670] Revert "mm: add /proc controls for pdflush threads" This reverts commit fafd688e4c0c34da0f3de909881117d374e4c7af. Work is progressing to switch away from pdflush as the process backing for flushing out dirty data. So it seems pointless to add more knobs to control pdflush threads. The original author of the patch did not have any specific use cases for adding the knobs, so we can easily revert this before 2.6.30 to avoid having to maintain this API forever. Signed-off-by: Jens Axboe --- Documentation/sysctl/vm.txt | 28 ---------------------------- include/linux/writeback.h | 2 -- kernel/sysctl.c | 23 ----------------------- mm/pdflush.c | 31 ++++++++++++------------------- 4 files changed, 12 insertions(+), 72 deletions(-) diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index b716d33912d8..c302ddf629a0 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm: - nr_hugepages - nr_overcommit_hugepages - nr_pdflush_threads -- nr_pdflush_threads_min -- nr_pdflush_threads_max - nr_trim_pages (only if CONFIG_MMU=n) - numa_zonelist_order - oom_dump_tasks @@ -469,32 +467,6 @@ The default value is 0. ============================================================== -nr_pdflush_threads_min - -This value controls the minimum number of pdflush threads. - -At boot time, the kernel will create and maintain 'nr_pdflush_threads_min' -threads for the kernel's lifetime. - -The default value is 2. The minimum value you can specify is 1, and -the maximum value is the current setting of 'nr_pdflush_threads_max'. - -See 'nr_pdflush_threads_max' below for more information. - -============================================================== - -nr_pdflush_threads_max - -This value controls the maximum number of pdflush threads that can be -created. The pdflush algorithm will create a new pdflush thread (up to -this maximum) if no pdflush threads have been available for >= 1 second. - -The default value is 8. The minimum value you can specify is the -current value of 'nr_pdflush_threads_min' and the -maximum is 1000. - -============================================================== - overcommit_memory: This value contains a flag that enables memory overcommitment. diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 9c1ed1fb6ddb..93445477f86a 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -168,8 +168,6 @@ void writeback_set_ratelimit(void); /* pdflush.c */ extern int nr_pdflush_threads; /* Global so it can be exported to sysctl read-only. */ -extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */ -extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */ #endif /* WRITEBACK_H */ diff --git a/kernel/sysctl.c b/kernel/sysctl.c index ea78fa101ad6..b2970d56fb76 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -101,7 +101,6 @@ static int __maybe_unused one = 1; static int __maybe_unused two = 2; static unsigned long one_ul = 1; static int one_hundred = 100; -static int one_thousand = 1000; /* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */ static unsigned long dirty_bytes_min = 2 * PAGE_SIZE; @@ -1033,28 +1032,6 @@ static struct ctl_table vm_table[] = { .mode = 0444 /* read-only*/, .proc_handler = &proc_dointvec, }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "nr_pdflush_threads_min", - .data = &nr_pdflush_threads_min, - .maxlen = sizeof nr_pdflush_threads_min, - .mode = 0644 /* read-write */, - .proc_handler = &proc_dointvec_minmax, - .strategy = &sysctl_intvec, - .extra1 = &one, - .extra2 = &nr_pdflush_threads_max, - }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "nr_pdflush_threads_max", - .data = &nr_pdflush_threads_max, - .maxlen = sizeof nr_pdflush_threads_max, - .mode = 0644 /* read-write */, - .proc_handler = &proc_dointvec_minmax, - .strategy = &sysctl_intvec, - .extra1 = &nr_pdflush_threads_min, - .extra2 = &one_thousand, - }, { .ctl_name = VM_SWAPPINESS, .procname = "swappiness", diff --git a/mm/pdflush.c b/mm/pdflush.c index f2caf96993f8..235ac440c44e 100644 --- a/mm/pdflush.c +++ b/mm/pdflush.c @@ -57,14 +57,6 @@ static DEFINE_SPINLOCK(pdflush_lock); */ int nr_pdflush_threads = 0; -/* - * The max/min number of pdflush threads. R/W by sysctl at - * /proc/sys/vm/nr_pdflush_threads_max/min - */ -int nr_pdflush_threads_max __read_mostly = MAX_PDFLUSH_THREADS; -int nr_pdflush_threads_min __read_mostly = MIN_PDFLUSH_THREADS; - - /* * The time at which the pdflush thread pool last went empty */ @@ -76,7 +68,7 @@ static unsigned long last_empty_jifs; * Thread pool management algorithm: * * - The minimum and maximum number of pdflush instances are bound - * by nr_pdflush_threads_min and nr_pdflush_threads_max. + * by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS. * * - If there have been no idle pdflush instances for 1 second, create * a new one. @@ -142,13 +134,14 @@ static int __pdflush(struct pdflush_work *my_work) * To throttle creation, we reset last_empty_jifs. */ if (time_after(jiffies, last_empty_jifs + 1 * HZ)) { - if (list_empty(&pdflush_list) && - nr_pdflush_threads < nr_pdflush_threads_max) { - last_empty_jifs = jiffies; - nr_pdflush_threads++; - spin_unlock_irq(&pdflush_lock); - start_one_pdflush_thread(); - spin_lock_irq(&pdflush_lock); + if (list_empty(&pdflush_list)) { + if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) { + last_empty_jifs = jiffies; + nr_pdflush_threads++; + spin_unlock_irq(&pdflush_lock); + start_one_pdflush_thread(); + spin_lock_irq(&pdflush_lock); + } } } @@ -160,7 +153,7 @@ static int __pdflush(struct pdflush_work *my_work) */ if (list_empty(&pdflush_list)) continue; - if (nr_pdflush_threads <= nr_pdflush_threads_min) + if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS) continue; pdf = list_entry(pdflush_list.prev, struct pdflush_work, list); if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) { @@ -266,9 +259,9 @@ static int __init pdflush_init(void) * Pre-set nr_pdflush_threads... If we fail to create, * the count will be decremented. */ - nr_pdflush_threads = nr_pdflush_threads_min; + nr_pdflush_threads = MIN_PDFLUSH_THREADS; - for (i = 0; i < nr_pdflush_threads_min; i++) + for (i = 0; i < MIN_PDFLUSH_THREADS; i++) start_one_pdflush_thread(); return 0; } From ceec1c33c36e4783cba41416f327f4bbc05218c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:29:22 +0100 Subject: [PATCH 284/670] [ARM] nwfpe: Add decleration for ExtendedCPDO Add header file decleration for 'ExtendedCPDO' in fpa11.h to stop the following sparse warning: extended_cpdo.c:90:14: warning: symbol 'ExtendedCPDO' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/nwfpe/fpa11.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 386cbd13eaf4..d3a6f9298e9e 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData, extern unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +/* extneded_cpdo.c */ +extern unsigned int ExtendedCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); + #endif From 3ea385f061d08a9509a884e347ad1007bb6c3c66 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:21:56 +0100 Subject: [PATCH 285/670] [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning The symbol 'floatx80_is_nan' prototype was defined locally in fpa11_cprt.c when it was built outside the file in softfloat-specialisze. Move this into softfloat.h to fix the following sparse warning: softfloat-specialize:276:6: warning: symbol 'floatx80_is_nan' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/nwfpe/fpa11_cprt.c | 4 ---- arch/arm/nwfpe/softfloat.h | 2 ++ 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index 9843dc533047..31c4eeec18b0 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -27,10 +27,6 @@ #include "fpmodule.inl" #include "softfloat.h" -#ifdef CONFIG_FPE_NWFPE_XP -extern flag floatx80_is_nan(floatx80); -#endif - unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 260fe29d73f5..13e479c5da57 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 ); char floatx80_lt_quiet( floatx80, floatx80 ); char floatx80_is_signaling_nan( floatx80 ); +extern flag floatx80_is_nan(floatx80); + #endif static inline flag extractFloat32Sign(float32 a) From 364b5b7b1d793a7f98be55b6b154716dcae78dfc Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 13 May 2009 21:56:59 -0500 Subject: [PATCH 286/670] sysrq, intel_fb: fix sysrq g collision Commit 79e539453b34e35f39299a899d263b0a1f1670bd introduced a regression where you cannot use sysrq 'g' to enter kgdb. The solution is to move the intel fb sysrq over to V for video instead of G for graphics. The SMP VOYAGER code to register for the sysrq-v is not anywhere to be found in the mainline kernel, so the comments in the code were cleaned up as well. This patch also cleans up the sysrq definitions for kgdb to make it generic for the kernel debugger, such that the sysrq 'g' can be used in the future to enter a gdbstub or another kernel debugger. Signed-off-by: Jason Wessel Acked-by: Jesse Barnes Acked-by: Randy Dunlap Signed-off-by: Andrew Morton --- drivers/char/sysrq.c | 4 ++-- drivers/gpu/drm/i915/intel_fb.c | 4 ++-- kernel/kgdb.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index b0a6a3e51924..d6a807f4077d 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -406,7 +406,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { &sysrq_showlocks_op, /* d */ &sysrq_term_op, /* e */ &sysrq_moom_op, /* f */ - /* g: May be registered by ppc for kgdb */ + /* g: May be registered for the kernel debugger */ NULL, /* g */ NULL, /* h - reserved for help */ &sysrq_kill_op, /* i */ @@ -431,7 +431,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = { &sysrq_sync_op, /* s */ &sysrq_showstate_op, /* t */ &sysrq_mountro_op, /* u */ - /* v: May be registered at init time by SMP VOYAGER */ + /* v: May be registered for frame buffer console restore */ NULL, /* v */ &sysrq_showstate_blocked_op, /* w */ /* x: May be registered on ppc/powerpc for xmon */ diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 3e094beecb99..e4652dcdd9bb 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -864,7 +864,7 @@ static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3) static struct sysrq_key_op sysrq_intelfb_restore_op = { .handler = intelfb_sysrq, - .help_msg = "force-fb(G)", + .help_msg = "force-fb(V)", .action_msg = "Restore framebuffer console", }; @@ -898,7 +898,7 @@ int intelfb_probe(struct drm_device *dev) ret = intelfb_single_fb_probe(dev); } - register_sysrq_key('g', &sysrq_intelfb_restore_op); + register_sysrq_key('v', &sysrq_intelfb_restore_op); return ret; } diff --git a/kernel/kgdb.c b/kernel/kgdb.c index e4dcfb2272a4..9147a3190c9d 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -1583,8 +1583,8 @@ static void sysrq_handle_gdb(int key, struct tty_struct *tty) static struct sysrq_key_op sysrq_gdb_op = { .handler = sysrq_handle_gdb, - .help_msg = "Gdb", - .action_msg = "GDB", + .help_msg = "debug(G)", + .action_msg = "DEBUG", }; #endif From 33ab1979bc9f719213bc3f392c8fd9d012e4f4e9 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 11 Feb 2009 18:46:32 -0600 Subject: [PATCH 287/670] kgdb,i386: use address that SP register points to in the exception frame The treatment of the SP register is different on x86_64 and i386. This is a regression fix that lived outside the mainline kernel from 2.6.27 to now. The regression was a result of the original merge consolidation of the i386 and x86_64 archs to x86. The incorrectly reported SP on i386 prevented stack tracebacks from working correctly in gdb. Signed-off-by: Jason Wessel --- arch/x86/kernel/kgdb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index eedfaebe1063..b1f4dffb919e 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -88,6 +88,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_SS] = __KERNEL_DS; gdb_regs[GDB_FS] = 0xFFFF; gdb_regs[GDB_GS] = 0xFFFF; + gdb_regs[GDB_SP] = (int)®s->sp; #else gdb_regs[GDB_R8] = regs->r8; gdb_regs[GDB_R9] = regs->r9; @@ -100,8 +101,8 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs32[GDB_PS] = regs->flags; gdb_regs32[GDB_CS] = regs->cs; gdb_regs32[GDB_SS] = regs->ss; -#endif gdb_regs[GDB_SP] = regs->sp; +#endif } /** From d34a792da969a00b0f653c512414411760f55a20 Mon Sep 17 00:00:00 2001 From: Frank Rowand Date: Fri, 15 May 2009 07:56:25 -0500 Subject: [PATCH 288/670] kgdb: gdb documentation fix gdb command "set remote debug 1" is not valid, change to correct command. Signed-off-by: Frank Rowand Signed-off-by: Jason Wessel --- Documentation/DocBook/kgdb.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 372dec20c8da..5cff41a5fa7c 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -281,7 +281,7 @@ seriously wrong while debugging, it will most often be the case that you want to enable gdb to be verbose about its target communications. You do this prior to issuing the target - remote command by typing in: set remote debug 1 + remote command by typing in: set debug remote 1 From 2ec0ae3acec47f628179ee95fe2c4da01b5e9fc4 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 15 May 2009 09:07:28 -0400 Subject: [PATCH 289/670] ext4: Fix race in ext4_inode_info.i_cached_extent If two CPU's simultaneously call ext4_ext_get_blocks() at the same time, there is nothing protecting the i_cached_extent structure from being used and updated at the same time. This could potentially cause the wrong location on disk to be read or written to, including potentially causing the corruption of the block group descriptors and/or inode table. This bug has been in the ext4 code since almost the very beginning of ext4's development. Fortunately once the data is stored in the page cache cache, ext4_get_blocks() doesn't need to be called, so trying to replicate this problem to the point where we could identify its root cause was *extremely* difficult. Many thanks to Kevin Shanahan for working over several months to be able to reproduce this easily so we could finally nail down the cause of the corruption. Signed-off-by: "Theodore Ts'o" Reviewed-by: "Aneesh Kumar K.V" --- fs/ext4/extents.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 172656c2a3bd..e3a55eb8b26a 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1841,11 +1841,13 @@ ext4_ext_put_in_cache(struct inode *inode, ext4_lblk_t block, { struct ext4_ext_cache *cex; BUG_ON(len == 0); + spin_lock(&EXT4_I(inode)->i_block_reservation_lock); cex = &EXT4_I(inode)->i_cached_extent; cex->ec_type = type; cex->ec_block = block; cex->ec_len = len; cex->ec_start = start; + spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); } /* @@ -1902,12 +1904,17 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block, struct ext4_extent *ex) { struct ext4_ext_cache *cex; + int ret = EXT4_EXT_CACHE_NO; + /* + * We borrow i_block_reservation_lock to protect i_cached_extent + */ + spin_lock(&EXT4_I(inode)->i_block_reservation_lock); cex = &EXT4_I(inode)->i_cached_extent; /* has cache valid data? */ if (cex->ec_type == EXT4_EXT_CACHE_NO) - return EXT4_EXT_CACHE_NO; + goto errout; BUG_ON(cex->ec_type != EXT4_EXT_CACHE_GAP && cex->ec_type != EXT4_EXT_CACHE_EXTENT); @@ -1918,11 +1925,11 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block, ext_debug("%u cached by %u:%u:%llu\n", block, cex->ec_block, cex->ec_len, cex->ec_start); - return cex->ec_type; + ret = cex->ec_type; } - - /* not in cache */ - return EXT4_EXT_CACHE_NO; +errout: + spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); + return ret; } /* From f36dd6e7c0c04a056d3441185a17e5d4e3723192 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 May 2009 15:07:47 +0200 Subject: [PATCH 290/670] [ARM] S3C64XX: GPIO include cleanup Cleanup arm/plat-s3c64xx/include/plat/gpio-bank-h.h include file. Using shift-left operation with value >32 is a bad habit. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Ben Dooks --- .../plat-s3c64xx/include/plat/gpio-bank-h.h | 20 +++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h index 81549516572f..2ba1767512d7 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h @@ -61,14 +61,14 @@ #define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) #define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32) - -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36) +#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) +#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) +#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) +#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) +#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) +#define S3C64XX_GPH9_OUTPUT (0x01 << 4) +#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) +#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) +#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) +#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) From beb9f4ed22ee618ffcf5064ff7d5ca4cfc83104b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 May 2009 15:07:41 +0200 Subject: [PATCH 291/670] [ARM] S3C64XX: fix GPIO debug Fix compilation bug when debug was enabled Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index ee9188add8fb..78ee52cffc9e 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -57,7 +57,7 @@ #if 1 #define gpio_dbg(x...) do { } while(0) #else -#define gpio_dbg(x...) printk(KERN_DEBUG ## x) +#define gpio_dbg(x...) printk(KERN_DEBUG x) #endif /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where From 871fcd7cf791b853ae044f813db94caefbf66725 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 14:20:53 +0100 Subject: [PATCH 292/670] [ARM] S3C24XX: Fix unused code warning in arch/arm/plat-s3c24xx/dma.c Fix unused code warning in arch/arm/plat-s3c24xx/dma.c if there is no PM support enabled. The function to_dma_chan() should be marked inline so that the compiler will eliminate it without warning if it isn't used. arch/arm/plat-s3c24xx/dma.c:1239: warning: 'to_dma_chan' defined but not used Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index aee2aeb46c60..07326f632361 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d EXPORT_SYMBOL(s3c2410_dma_getposition); -static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) +static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) { return container_of(dev, struct s3c2410_dma_chan, dev); } From a8af6de00fafed316fea8f39d87c7e8e19ec1ea0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 14:57:09 +0100 Subject: [PATCH 293/670] [ARM] S3C2410: mach-bast.c registering i2c data too early The BAST support code is calling s3c_i2c0_set_platdata() from the map_io() entry, instead of the bast_init() code. This causes the registration to fail due to kmalloc() not being available at the time. This fixes the following error: s3c_i2c0_set_platdata: no memory for platform data Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 4389c160f7d0..8637dea5e150 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -588,8 +588,6 @@ static void __init bast_map_io(void) s3c_device_nand.dev.platform_data = &bast_nand_info; - s3c_i2c0_set_platdata(&bast_i2c_info); - s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); @@ -602,6 +600,7 @@ static void __init bast_init(void) sysdev_class_register(&bast_pm_sysclass); sysdev_register(&bast_pm_sysdev); + s3c_i2c0_set_platdata(&bast_i2c_info); s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); From 3ac19bb443255579b30f05af5e688b6c73b1bb91 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 15:21:57 +0100 Subject: [PATCH 294/670] [ARM] S3C: Do not set clk->owner field if unset The s3c24xx_register_clock() function has been doing a test on clk->owner to see if it is NULL, and then setting itself as the owner if clk->owner == NULL. This is not needed, arch/arm/plat-s3c/clock.c cannot be compiled as a module, and even if it was, it should not be playing with this field if it being registered from somewhere else. The best course of action is to remove this bit of code completely. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/clock.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c index b6be76e2fe51..4d01ef1a25dd 100644 --- a/arch/arm/plat-s3c/clock.c +++ b/arch/arm/plat-s3c/clock.c @@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = { int s3c24xx_register_clock(struct clk *clk) { - clk->owner = THIS_MODULE; - if (clk->enable == NULL) clk->enable = clk_null_enable; From 1f71ebedb3f8ce9108978168759c8551d873a912 Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Thu, 14 May 2009 19:38:24 -0700 Subject: [PATCH 295/670] devpts: correctly set default options devpts_get_sb() calls memset(0) to clear mount options and calls parse_mount_options() if user specified any mount options. The memset(0) is bogus since the 'mode' and 'ptmxmode' options are non-zero by default. parse_mount_options() restores options to default anyway and can properly deal with NULL mount options. So in devpts_get_sb() remove memset(0) and call parse_mount_options() even for NULL mount options. Bug reported by Eric Paris: http://lkml.org/lkml/2009/5/7/448. Signed-off-by: Sukadev Bhattiprolu Tested-by: Marc Dionne Reported-by: Eric Paris Cc: Christoph Hellwig Cc: Alan Cox Acked-by: Serge Hallyn Cc: Al Viro Cc: "Rafael J. Wysocki" Reviewed-by: "H. Peter Anvin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/devpts/inode.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c index 21165cf934ff..c68edb969441 100644 --- a/fs/devpts/inode.c +++ b/fs/devpts/inode.c @@ -90,6 +90,15 @@ static inline struct super_block *pts_sb_from_inode(struct inode *inode) #define PARSE_MOUNT 0 #define PARSE_REMOUNT 1 +/* + * parse_mount_options(): + * Set @opts to mount options specified in @data. If an option is not + * specified in @data, set it to its default value. The exception is + * 'newinstance' option which can only be set/cleared on a mount (i.e. + * cannot be changed during remount). + * + * Note: @data may be NULL (in which case all options are set to default). + */ static int parse_mount_options(char *data, int op, struct pts_mount_opts *opts) { char *p; @@ -355,12 +364,9 @@ static int devpts_get_sb(struct file_system_type *fs_type, struct pts_mount_opts opts; struct super_block *s; - memset(&opts, 0, sizeof(opts)); - if (data) { - error = parse_mount_options(data, PARSE_MOUNT, &opts); - if (error) - return error; - } + error = parse_mount_options(data, PARSE_MOUNT, &opts); + if (error) + return error; if (opts.newinstance) s = sget(fs_type, NULL, set_anon_super, NULL); From 9a1a69a1f41cbefebf3172761f197db6aba71e68 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 29 Apr 2009 13:12:39 -0500 Subject: [PATCH 296/670] [SCSI] fc-transport: Close state transition-window during rport deletion. Andrew Vasquez wrote: > fc-transport: Close state transition-window during rport deletion. > > After an rport's state has transitioned to FC_PORTSTATE_BLOCKED, > but, prior to making the upcall to 'block' the scsi-target > associated with an rport, queued commands can recycle and > ultimately run out of retries causing failures to propagate to > upper-level drivers. Close this transition-window by returning > the non-'retries' modifying DID_IMM_RETRY status for submitted > I/Os. The same can happen for iscsi when transitioning from logged in to failed and blocking the sdevs. This patch converts iscsi and fc's transitions back to use DID_IMM_RETRY instead of DID_TRANSPORT_DISRUPTED which has a limited number of retries that we do not want to use for handling this race. Signed-off-by: Andrew Vasquez [Addition of iscsi and fc port online devloss case conversion by Mike Christie] Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 2 +- include/scsi/scsi_transport_fc.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 094795455293..0a2ce7b6325c 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -357,7 +357,7 @@ int iscsi_session_chkready(struct iscsi_cls_session *session) err = 0; break; case ISCSI_SESSION_FAILED: - err = DID_TRANSPORT_DISRUPTED << 16; + err = DID_IMM_RETRY << 16; break; case ISCSI_SESSION_FREE: err = DID_TRANSPORT_FAILFAST << 16; diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index c9184f756cad..68a8d873bbd9 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -680,7 +680,7 @@ fc_remote_port_chkready(struct fc_rport *rport) if (rport->roles & FC_PORT_ROLE_FCP_TARGET) result = 0; else if (rport->flags & FC_RPORT_DEVLOSS_PENDING) - result = DID_TRANSPORT_DISRUPTED << 16; + result = DID_IMM_RETRY << 16; else result = DID_NO_CONNECT << 16; break; @@ -688,7 +688,7 @@ fc_remote_port_chkready(struct fc_rport *rport) if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT) result = DID_TRANSPORT_FAILFAST << 16; else - result = DID_TRANSPORT_DISRUPTED << 16; + result = DID_IMM_RETRY << 16; break; default: result = DID_NO_CONNECT << 16; From 5e43754fd949193252ecb470d7fb08b547a1e310 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 30 Apr 2009 19:13:41 -0700 Subject: [PATCH 297/670] [SCSI] ses: fix problems caused by empty SES provided name We use the name provided by SES to name objects. An empty name is legal in SES but causes problems in our generic device hierarchy. Fix this by falling back to a number if the name is either NULL or empty. Also fix a secondary bug spotted in that dev_set_name(dev, name) uses a string format and so would go wrong if name contained a '%'. Signed-off-by: Yinghai Lu Signed-off-by: James Bottomley --- drivers/misc/enclosure.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 3cf61ece71d7..348443bdb23b 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -119,7 +119,7 @@ enclosure_register(struct device *dev, const char *name, int components, edev->edev.class = &enclosure_class; edev->edev.parent = get_device(dev); edev->cb = cb; - dev_set_name(&edev->edev, name); + dev_set_name(&edev->edev, "%s", name); err = device_register(&edev->edev); if (err) goto err; @@ -255,8 +255,8 @@ enclosure_component_register(struct enclosure_device *edev, ecomp->number = number; cdev = &ecomp->cdev; cdev->parent = get_device(&edev->edev); - if (name) - dev_set_name(cdev, name); + if (name && name[0]) + dev_set_name(cdev, "%s", name); else dev_set_name(cdev, "%u", number); From 8454e9888cb0316dd296fd5d47c612248ed5e1d1 Mon Sep 17 00:00:00 2001 From: adam radford Date: Tue, 5 May 2009 11:45:37 -0700 Subject: [PATCH 298/670] [SCSI] 3w-9xxx: scsi_dma_unmap fix This patch fixes the following regression the occurred during the scsi_dma_map()/unmap() changes: 3w-9xxx 0001:45:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=36 bytes] Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-9xxx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 8b7983aba8f7..36c21b19e5d7 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1978,7 +1978,8 @@ static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id) { struct scsi_cmnd *cmd = tw_dev->srb[request_id]; - scsi_dma_unmap(cmd); + if (cmd->SCp.phase == TW_PHASE_SGLIST) + scsi_dma_unmap(cmd); } /* End twa_unmap_scsi_data() */ /* scsi_host_template initializer */ From 7b14f58ad65f9d74e4273fb45360cfea824495aa Mon Sep 17 00:00:00 2001 From: adam radford Date: Mon, 11 May 2009 14:55:55 -0700 Subject: [PATCH 299/670] [SCSI] 3w-xxxx: scsi_dma_unmap fix This patch fixes the following regression that occurred during the scsi_dma_map()/unmap() changes when compiling with CONFIG_DMA_API_DEBUG=y : WARNING: at lib/dma-debug.c:496 check_unmap+0x142/0x542() Hardware name: 3w-xxxx 0000:02:02.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=36 bytes] Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-xxxx.c | 5 +++-- drivers/scsi/3w-xxxx.h | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index c03f1d2c9e2e..faa0fcfed71e 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -6,7 +6,7 @@ Arnaldo Carvalho de Melo Brad Strand - Copyright (C) 1999-2007 3ware Inc. + Copyright (C) 1999-2009 3ware Inc. Kernel compatiblity By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick @@ -1294,7 +1294,8 @@ static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) { dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n"); - scsi_dma_unmap(cmd); + if (cmd->SCp.phase == TW_PHASE_SGLIST) + scsi_dma_unmap(cmd); } /* End tw_unmap_scsi_data() */ /* This function will reset a device extension */ diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h index 8e71e5e122b3..a5a2ba2561d9 100644 --- a/drivers/scsi/3w-xxxx.h +++ b/drivers/scsi/3w-xxxx.h @@ -6,7 +6,7 @@ Arnaldo Carvalho de Melo Brad Strand - Copyright (C) 1999-2007 3ware Inc. + Copyright (C) 1999-2009 3ware Inc. Kernel compatiblity By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick From 88fc86c283d9c3854e67e4155808027bc2519eb6 Mon Sep 17 00:00:00 2001 From: GeunSik Lim Date: Thu, 14 May 2009 17:23:38 +0900 Subject: [PATCH 300/670] tracing: Append prompt in /debug/tracing/README file append prompt in /debug/tracing/README file. This is trivial issue. Fix typo Mini Howto file(README) for ftrace. [ Impact: cleanup ] Signed-off-by: GeunSik Lim Acked-by: Steven Rostedt Cc: williams LKML-Reference: <1242289418.31161.45.camel@centos51> Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a884c09006c4..cda81ec58d9f 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2380,7 +2380,7 @@ static const char readme_msg[] = "# echo print-parent > /debug/tracing/trace_options\n" "# echo 1 > /debug/tracing/tracing_enabled\n" "# cat /debug/tracing/trace > /tmp/trace.txt\n" - "echo 0 > /debug/tracing/tracing_enabled\n" + "# echo 0 > /debug/tracing/tracing_enabled\n" ; static ssize_t From 67651ee5710c45ea62fae68b768d65395ccf47c2 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 8 Apr 2009 16:02:18 -0400 Subject: [PATCH 301/670] [libata] sata_sx4: convert to new exception handling methods Signed-off-by: Jeff Garzik --- drivers/ata/sata_sx4.c | 166 ++++++++++++++++++++++++++++++----------- 1 file changed, 121 insertions(+), 45 deletions(-) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index dce3dccced3f..1ce98afa69b6 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -213,8 +213,9 @@ struct pdc_host_priv { static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); -static void pdc_eng_timeout(struct ata_port *ap); -static void pdc_20621_phy_reset(struct ata_port *ap); +static void pdc_error_handler(struct ata_port *ap); +static void pdc_freeze(struct ata_port *ap); +static void pdc_thaw(struct ata_port *ap); static int pdc_port_start(struct ata_port *ap); static void pdc20621_qc_prep(struct ata_queued_cmd *qc); static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf); @@ -233,6 +234,10 @@ static void pdc20621_put_to_dimm(struct ata_host *host, void *psource, u32 offset, u32 size); static void pdc20621_irq_clear(struct ata_port *ap); static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc); +static int pdc_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc); +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc); static struct scsi_host_template pdc_sata_sht = { @@ -243,20 +248,24 @@ static struct scsi_host_template pdc_sata_sht = { /* TODO: inherit from base port_ops after converting to new EH */ static struct ata_port_operations pdc_20621_ops = { - .sff_tf_load = pdc_tf_load_mmio, - .sff_tf_read = ata_sff_tf_read, - .sff_check_status = ata_sff_check_status, - .sff_exec_command = pdc_exec_command_mmio, - .sff_dev_select = ata_sff_dev_select, - .phy_reset = pdc_20621_phy_reset, + .inherits = &ata_sff_port_ops, + + .check_atapi_dma = pdc_check_atapi_dma, .qc_prep = pdc20621_qc_prep, .qc_issue = pdc20621_qc_issue, - .qc_fill_rtf = ata_sff_qc_fill_rtf, - .sff_data_xfer = ata_sff_data_xfer, - .eng_timeout = pdc_eng_timeout, - .sff_irq_clear = pdc20621_irq_clear, - .sff_irq_on = ata_sff_irq_on, + + .freeze = pdc_freeze, + .thaw = pdc_thaw, + .softreset = pdc_softreset, + .error_handler = pdc_error_handler, + .lost_interrupt = ATA_OP_NULL, + .post_internal_cmd = pdc_post_internal_cmd, + .port_start = pdc_port_start, + + .sff_tf_load = pdc_tf_load_mmio, + .sff_exec_command = pdc_exec_command_mmio, + .sff_irq_clear = pdc20621_irq_clear, }; static const struct ata_port_info pdc_port_info[] = { @@ -310,14 +319,6 @@ static int pdc_port_start(struct ata_port *ap) return 0; } -static void pdc_20621_phy_reset(struct ata_port *ap) -{ - VPRINTK("ENTER\n"); - ap->cbl = ATA_CBL_SATA; - ata_port_probe(ap); - ata_bus_reset(ap); -} - static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf, unsigned int portno, unsigned int total_len) @@ -859,40 +860,115 @@ static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance) return IRQ_RETVAL(handled); } -static void pdc_eng_timeout(struct ata_port *ap) +static void pdc_freeze(struct ata_port *ap) { - u8 drv_stat; - struct ata_host *host = ap->host; - struct ata_queued_cmd *qc; - unsigned long flags; + void __iomem *mmio = ap->ioaddr.cmd_addr; + u32 tmp; - DPRINTK("ENTER\n"); + /* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */ - spin_lock_irqsave(&host->lock, flags); + tmp = readl(mmio + PDC_CTLSTAT); + tmp |= PDC_MASK_INT; + tmp &= ~PDC_DMA_ENABLE; + writel(tmp, mmio + PDC_CTLSTAT); + readl(mmio + PDC_CTLSTAT); /* flush */ +} - qc = ata_qc_from_tag(ap, ap->link.active_tag); +static void pdc_thaw(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr; + void __iomem *mmio_base; + u32 tmp; - switch (qc->tf.protocol) { - case ATA_PROT_DMA: - case ATA_PROT_NODATA: - ata_port_printk(ap, KERN_ERR, "command timeout\n"); - qc->err_mask |= __ac_err_mask(ata_wait_idle(ap)); - break; + /* FIXME: start HDMA engine, if zero ATA engines running */ - default: - drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000); + /* reading SEQ mask register clears IRQ */ + mmio_base = ap->host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; + readl(mmio_base + PDC_20621_SEQMASK); - ata_port_printk(ap, KERN_ERR, - "unknown timeout, cmd 0x%x stat 0x%x\n", - qc->tf.command, drv_stat); + /* turn IRQ back on */ + tmp = readl(mmio + PDC_CTLSTAT); + tmp &= ~PDC_MASK_INT; + writel(tmp, mmio + PDC_CTLSTAT); + readl(mmio + PDC_CTLSTAT); /* flush */ +} - qc->err_mask |= ac_err_mask(drv_stat); - break; +static void pdc_reset_port(struct ata_port *ap) +{ + void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT; + unsigned int i; + u32 tmp; + + /* FIXME: handle HDMA copy engine */ + + for (i = 11; i > 0; i--) { + tmp = readl(mmio); + if (tmp & PDC_RESET) + break; + + udelay(100); + + tmp |= PDC_RESET; + writel(tmp, mmio); } - spin_unlock_irqrestore(&host->lock, flags); - ata_eh_qc_complete(qc); - DPRINTK("EXIT\n"); + tmp &= ~PDC_RESET; + writel(tmp, mmio); + readl(mmio); /* flush */ +} + +static int pdc_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + pdc_reset_port(link->ap); + return ata_sff_softreset(link, class, deadline); +} + +static void pdc_error_handler(struct ata_port *ap) +{ + if (!(ap->pflags & ATA_PFLAG_FROZEN)) + pdc_reset_port(ap); + + ata_std_error_handler(ap); +} + +static void pdc_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* make DMA engine forget about the failed command */ + if (qc->flags & ATA_QCFLAG_FAILED) + pdc_reset_port(ap); +} + +static int pdc_check_atapi_dma(struct ata_queued_cmd *qc) +{ + u8 *scsicmd = qc->scsicmd->cmnd; + int pio = 1; /* atapi dma off by default */ + + /* Whitelist commands that may use DMA. */ + switch (scsicmd[0]) { + case WRITE_12: + case WRITE_10: + case WRITE_6: + case READ_12: + case READ_10: + case READ_6: + case 0xad: /* READ_DVD_STRUCTURE */ + case 0xbe: /* READ_CD */ + pio = 0; + } + /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */ + if (scsicmd[0] == WRITE_10) { + unsigned int lba = + (scsicmd[2] << 24) | + (scsicmd[3] << 16) | + (scsicmd[4] << 8) | + scsicmd[5]; + if (lba >= 0xFFFF4FA2) + pio = 1; + } + return pio; } static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) From b4ecc126991b30fe5f9a59dfacda046aeac124b2 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 13 May 2009 17:16:55 -0700 Subject: [PATCH 302/670] x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" Analysed-by: "Li Xin" Analysed-by: "Nakajima Jun" Signed-off-by: Jeremy Fitzhardinge Acked-by: H. Peter Anvin Cc: Nick Piggin Cc: Xen-devel LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 13 +++++++++++++ arch/x86/include/asm/paravirt.h | 2 +- arch/x86/include/asm/spinlock.h | 4 ++-- arch/x86/kernel/Makefile | 3 ++- arch/x86/kernel/paravirt.c | 2 ++ arch/x86/xen/Makefile | 5 +++-- arch/x86/xen/xen-ops.h | 19 +++++++++++++++---- 7 files changed, 38 insertions(+), 10 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index df9e885eee14..a6efe0a2e9ae 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -498,6 +498,19 @@ config PARAVIRT over full virtualization. However, when run without a hypervisor the kernel is theoretically slower and slightly larger. +config PARAVIRT_SPINLOCKS + bool "Paravirtualization layer for spinlocks" + depends on PARAVIRT && SMP && EXPERIMENTAL + ---help--- + Paravirtualized spinlocks allow a pvops backend to replace the + spinlock implementation with something virtualization-friendly + (for example, block the virtual CPU rather than spinning). + + Unfortunately the downside is an up to 5% performance hit on + native kernels, with various workloads. + + If you are unsure how to answer this question, answer N. + config PARAVIRT_CLOCK bool default n diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 378e3691c08c..a53da004e08e 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -1443,7 +1443,7 @@ u64 _paravirt_ident_64(u64); #define paravirt_nop ((void *)_paravirt_nop) -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS) static inline int __raw_spin_is_locked(struct raw_spinlock *lock) { diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index e5e6caffec87..b7e5db876399 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -172,7 +172,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock) return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1; } -#ifndef CONFIG_PARAVIRT +#ifndef CONFIG_PARAVIRT_SPINLOCKS static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { @@ -206,7 +206,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock, __raw_spin_lock(lock); } -#endif +#endif /* CONFIG_PARAVIRT_SPINLOCKS */ static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) { diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 145cce75cda7..88d1bfc847d3 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -89,7 +89,8 @@ obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o obj-$(CONFIG_KVM_GUEST) += kvm.o obj-$(CONFIG_KVM_CLOCK) += kvmclock.o -obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o +obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o +obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 8e45f4464880..9faf43bea336 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -134,7 +134,9 @@ static void *get_call_destination(u8 type) .pv_irq_ops = pv_irq_ops, .pv_apic_ops = pv_apic_ops, .pv_mmu_ops = pv_mmu_ops, +#ifdef CONFIG_PARAVIRT_SPINLOCKS .pv_lock_ops = pv_lock_ops, +#endif }; return *((void **)&tmpl + type); } diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3b767d03fd6a..172438f86a02 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -9,5 +9,6 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ time.o xen-asm.o xen-asm_$(BITS).o \ grant-table.o suspend.o -obj-$(CONFIG_SMP) += smp.o spinlock.o -obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o \ No newline at end of file +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o +obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 20139464943c..ca6596b05d53 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -62,15 +62,26 @@ void xen_setup_vcpu_info_placement(void); #ifdef CONFIG_SMP void xen_smp_init(void); -void __init xen_init_spinlocks(void); -__cpuinit void xen_init_lock_cpu(int cpu); -void xen_uninit_lock_cpu(int cpu); - extern cpumask_var_t xen_cpu_initialized_map; #else static inline void xen_smp_init(void) {} #endif +#ifdef CONFIG_PARAVIRT_SPINLOCKS +void __init xen_init_spinlocks(void); +__cpuinit void xen_init_lock_cpu(int cpu); +void xen_uninit_lock_cpu(int cpu); +#else +static inline void xen_init_spinlocks(void) +{ +} +static inline void xen_init_lock_cpu(int cpu) +{ +} +static inline void xen_uninit_lock_cpu(int cpu) +{ +} +#endif /* Declare an asm function, along with symbols needed to make it inlineable */ From 19799bfc5da476ad72eecc5f0f9018c5d351cbd5 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Wed, 13 May 2009 18:02:21 -0500 Subject: [PATCH 303/670] [libata] sata_sx4: fixup interrupt handling Issuing ATA_CMD_SET_FEATURES (0xef) times out because pdc20621_interrupt ignores command completion since ATA_TFLAG_POLLING flag is set. This has already been fixed for sata_promise: commit 51b94d2a5a90d4800e74d7348bcde098a28f4fb3 Author: Tejun Heo Date: Fri Jun 8 13:46:55 2007 -0700 sata_promise: use TF interface for polling NODATA commands Also, this patch includes Mikael's original patches: http://marc.info/?l=linux-ide&m=121135828227724&w=2 http://marc.info/?l=linux-ide&m=121144512109826&w=2 Signed-off-by: Mikael Pettersson Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/sata_sx4.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 1ce98afa69b6..eb05a3c82a9e 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -687,8 +687,11 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc) static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc) { switch (qc->tf.protocol) { - case ATA_PROT_DMA: case ATA_PROT_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + break; + /*FALLTHROUGH*/ + case ATA_PROT_DMA: pdc20621_packet_start(qc); return 0; @@ -787,12 +790,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap, static void pdc20621_irq_clear(struct ata_port *ap) { - struct ata_host *host = ap->host; - void __iomem *mmio = host->iomap[PDC_MMIO_BAR]; - - mmio += PDC_CHIP0_OFS; - - readl(mmio + PDC_20621_SEQMASK); + ioread8(ap->ioaddr.status_addr); } static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance) @@ -877,14 +875,12 @@ static void pdc_freeze(struct ata_port *ap) static void pdc_thaw(struct ata_port *ap) { void __iomem *mmio = ap->ioaddr.cmd_addr; - void __iomem *mmio_base; u32 tmp; /* FIXME: start HDMA engine, if zero ATA engines running */ - /* reading SEQ mask register clears IRQ */ - mmio_base = ap->host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; - readl(mmio_base + PDC_20621_SEQMASK); + /* clear IRQ */ + ioread8(ap->ioaddr.status_addr); /* turn IRQ back on */ tmp = readl(mmio + PDC_CTLSTAT); @@ -974,7 +970,7 @@ static int pdc_check_atapi_dma(struct ata_queued_cmd *qc) static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); + tf->protocol == ATAPI_PROT_DMA); ata_sff_tf_load(ap, tf); } @@ -982,7 +978,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { WARN_ON(tf->protocol == ATA_PROT_DMA || - tf->protocol == ATA_PROT_NODATA); + tf->protocol == ATAPI_PROT_DMA); ata_sff_exec_command(ap, tf); } From f48c019f1550aea7a3a1227efb9901916f5cd30d Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 22:10:50 -0500 Subject: [PATCH 304/670] sata_fsl: Fix compile warnings We we build with dma_addr_t as a 64-bit quantity we get: drivers/ata/sata_fsl.c: In function 'sata_fsl_fill_sg': drivers/ata/sata_fsl.c:340: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'dma_addr_t' Signed-off-by: Kumar Gala Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index c2e90e1fece0..5edd6549876d 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -332,13 +332,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc, dma_addr_t sg_addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); - VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n", - sg_addr, sg_len); + VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n", + (unsigned long long)sg_addr, sg_len); /* warn if each s/g element is not dword aligned */ if (sg_addr & 0x03) ata_port_printk(qc->ap, KERN_ERR, - "s/g addr unaligned : 0x%x\n", sg_addr); + "s/g addr unaligned : 0x%llx\n", + (unsigned long long)sg_addr); if (sg_len & 0x03) ata_port_printk(qc->ap, KERN_ERR, "s/g len unaligned : 0x%x\n", sg_len); From d358724385d9bb3e360f5b95c17ec4f77c913460 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Thu, 14 May 2009 09:47:07 -0500 Subject: [PATCH 305/670] sata_fsl: Fix the command description of FSL SATA controller The bit 11 of command description is reserved bit in Freescale SATA controller and needs to be set to '1'. This is needed to make sure the last write from the controller to the buffer descriptor is seen before an interrupt is raised. Signed-off-by: Dave Liu Signed-off-by: Kumar Gala Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 5edd6549876d..36b8629203be 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -205,6 +205,7 @@ struct cmdhdr_tbl_entry { * Description information bitdefs */ enum { + CMD_DESC_RES = (1 << 11), VENDOR_SPECIFIC_BIST = (1 << 10), CMD_DESC_SNOOP_ENABLE = (1 << 9), FPDMA_QUEUED_CMD = (1 << 8), @@ -388,7 +389,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) void __iomem *hcr_base = host_priv->hcr_base; unsigned int tag = sata_fsl_tag(qc->tag, hcr_base); struct command_desc *cd; - u32 desc_info = CMD_DESC_SNOOP_ENABLE; + u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE; u32 num_prde = 0; u32 ttl_dwords = 0; dma_addr_t cd_paddr; @@ -841,7 +842,7 @@ issue_srst: /* device reset/SRST is a control register update FIS, uses tag0 */ sata_fsl_setup_cmd_hdr_entry(pp, 0, - SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ ata_tf_to_fis(&tf, pmp, 0, cfis); @@ -887,7 +888,8 @@ issue_srst: * using ATA signature D2H register FIS to the host controller. */ - sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5); + sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, + 0, 0, 5); tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ ata_tf_to_fis(&tf, pmp, 0, cfis); From 61d79a8eb362f826a002d3d14c4f9a070a818542 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 15 May 2009 00:40:34 -0400 Subject: [PATCH 306/670] libata: Report disk alignment and physical block size For disks with 4KB sectors, report the correct block size and alignment when filling out the READ CAPACITY(16) response. This patch is based upon code from Matthew Wilcox' 4KB ATA tree. I fixed the bug I reported a while back caused by ATA and SCSI using different approaches to describing the alignment. Signed-off-by: Martin K. Petersen Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 68d9132d8f6f..d1718a1f278a 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2376,7 +2376,23 @@ saving_not_supp: */ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) { - u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */ + struct ata_device *dev = args->dev; + u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */ + u8 log_per_phys = 0; + u16 lowest_aligned = 0; + u16 word_106 = dev->id[106]; + u16 word_209 = dev->id[209]; + + if ((word_106 & 0xc000) == 0x4000) { + /* Number and offset of logical sectors per physical sector */ + if (word_106 & (1 << 13)) + log_per_phys = word_106 & 0xf; + if ((word_209 & 0xc000) == 0x4000) { + u16 first = dev->id[209] & 0x3fff; + if (first > 0) + lowest_aligned = (1 << log_per_phys) - first; + } + } VPRINTK("ENTER\n"); @@ -2407,6 +2423,11 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf) /* sector size */ rbuf[10] = ATA_SECT_SIZE >> 8; rbuf[11] = ATA_SECT_SIZE & 0xff; + + rbuf[12] = 0; + rbuf[13] = log_per_phys; + rbuf[14] = (lowest_aligned >> 8) & 0x3f; + rbuf[15] = lowest_aligned; } return 0; From 4bca3286433585b5f1c3e7d8ac37a2f4b3def9ca Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 15 May 2009 00:40:35 -0400 Subject: [PATCH 307/670] libata: Media rotation rate and form factor heuristics This patch provides new heuristics for parsing both the form factor and media rotation rate ATA IDENFITY words. The reported ATA version must be 7 or greater and the device must return values defined as valid in the standard. Only then are the characteristics reported to SCSI via the VPD B1 page. This seems like a reasonable compromise to me considering that we have been shipping several kernel releases that key off the rotation rate bit without any version checking whatsoever. With no complaints so far. Signed-off-by: Martin K. Petersen Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 11 ++++++----- include/linux/ata.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d1718a1f278a..342316064e9f 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2142,13 +2142,14 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) { + int form_factor = ata_id_form_factor(args->id); + int media_rotation_rate = ata_id_rotation_rate(args->id); + rbuf[1] = 0xb1; rbuf[3] = 0x3c; - if (ata_id_major_version(args->id) > 7) { - rbuf[4] = args->id[217] >> 8; - rbuf[5] = args->id[217]; - rbuf[7] = args->id[168] & 0xf; - } + rbuf[4] = media_rotation_rate >> 8; + rbuf[5] = media_rotation_rate; + rbuf[7] = form_factor; return 0; } diff --git a/include/linux/ata.h b/include/linux/ata.h index cb79b7a208e1..915da43edee1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -730,6 +730,34 @@ static inline int ata_id_has_unload(const u16 *id) return 0; } +static inline int ata_id_form_factor(const u16 *id) +{ + u16 val = id[168]; + + if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff) + return 0; + + val &= 0xf; + + if (val > 5) + return 0; + + return val; +} + +static inline int ata_id_rotation_rate(const u16 *id) +{ + u16 val = id[217]; + + if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff) + return 0; + + if (val > 1 && val < 0x401) + return 0; + + return val; +} + static inline int ata_id_has_trim(const u16 *id) { if (ata_id_major_version(id) >= 7 && From 4484079d517c2b6521621be0b1ea246ccc55c7d7 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 15 May 2009 23:30:50 +0200 Subject: [PATCH 308/670] PM: check sysdev_suspend(PMSG_FREEZE) return value Check the return value of sysdev_suspend(). I think this was a typo. Without this change, the following "if" check is always false. I also changed the error message so it's distinguishable from the similar message a few lines above. Signed-off-by: Bjorn Helgaas Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- kernel/power/disk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/power/disk.c b/kernel/power/disk.c index e71ca9cd81b2..b0dc9e7a0d17 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -241,9 +241,9 @@ static int create_image(int platform_mode) local_irq_disable(); - sysdev_suspend(PMSG_FREEZE); + error = sysdev_suspend(PMSG_FREEZE); if (error) { - printk(KERN_ERR "PM: Some devices failed to power down, " + printk(KERN_ERR "PM: Some system devices failed to power down, " "aborting hibernation\n"); goto Enable_irqs; } From 975b3c474c13d29337eaf7da8f5f5c0299e4943f Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Fri, 15 May 2009 22:27:49 -0400 Subject: [PATCH 309/670] ACPI: resume: re-enable SCI-enable workaround The BIOS bug workaround mistakenly got disabled when we followed the ACPI specification more closely by ignoring OS updates to that bit. (The BIOS is supposed to update SCI_EN, not the OS) http://bugzilla.kernel.org/show_bug.cgi?id=13289 Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/aclocal.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 772ee5c4ccca..2ec394a328e9 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -787,7 +787,12 @@ struct acpi_bit_register_info { /* For control registers, both ignored and reserved bits must be preserved */ -#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0201 /* Bits 9, 0(SCI_EN) */ +/* + * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0) + * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly + * as a BIOS workaround on some machines. + */ +#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0200 /* Bits 9 */ #define ACPI_PM1_CONTROL_RESERVED_BITS 0xC1F8 /* Bits 14-15, 3-8 */ #define ACPI_PM1_CONTROL_PRESERVED_BITS \ (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS) From 815ab0fd40579ad2aa42058298073503648762b9 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 22:19:45 -0400 Subject: [PATCH 310/670] ACPI: suspend: restore BM_RLD on resume In 2.6.29, 31878dd86b7df9a147f5e6cc6e07092b4308782b "ACPI: remove BM_RLD access from idle entry path" moved BM_RLD initialization to init-time from run time. But we discovered that some BIOS do not restore BM_RLD after suspend, causing device errors on C3 and C4 after resume. So now the kernel restores BM_RLD. http://bugzilla.kernel.org/show_bug.cgi?id=13032 Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f7ca8c55956b..c1d59cfdb5fb 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -202,15 +202,38 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr, * Suspend / resume control */ static int acpi_idle_suspend; +static u32 saved_bm_rld; + +static void acpi_idle_bm_rld_save(void) +{ + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); +} +static void acpi_idle_bm_rld_restore(void) +{ + u32 resumed_bm_rld; + + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + + if (resumed_bm_rld != saved_bm_rld) + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); +} int acpi_processor_suspend(struct acpi_device * device, pm_message_t state) { + if (acpi_idle_suspend == 1) + return 0; + + acpi_idle_bm_rld_save(); acpi_idle_suspend = 1; return 0; } int acpi_processor_resume(struct acpi_device * device) { + if (acpi_idle_suspend == 0) + return 0; + + acpi_idle_bm_rld_restore(); acpi_idle_suspend = 0; return 0; } From ecb4aed78dcf09e48c8c34c8c2fa7f5c69344be6 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 24 Apr 2009 11:33:47 -0400 Subject: [PATCH 311/670] ACPI, i915: build fix drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' http://bugzilla.kernel.org/show_bug.cgi?id=13165 Signed-off-by: Len Brown --- drivers/gpu/drm/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 3a22eb9be378..f33d25279912 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -83,6 +83,12 @@ config DRM_I915 config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 + # i915 KMS depends on ACPI_VIDEO when ACPI is enabled + # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI + select ACPI_VIDEO if ACPI help Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old From 56c213fa012f2bad9eff908292ff2500f840b020 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 11 May 2009 09:35:57 +0800 Subject: [PATCH 312/670] ACPI processor: introduce module parameter processor.ignore_tpc Introduce module parameter processor.ignore_tpc. Some laptops are shipped with buggy _TPC, this module parameter is used to to disable the buggy support. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui Tested-by: James Ettle Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index d0d1f4d50434..5f09fb8c0e05 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -45,6 +45,14 @@ #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); +/* ignore_tpc: + * 0 -> acpi processor driver doesn't ignore _TPC values + * 1 -> acpi processor driver ignores _TPC values + */ +static int ignore_tpc; +module_param(ignore_tpc, int, 0644); +MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support"); + struct throttling_tstate { unsigned int cpu; /* cpu nr */ int target_state; /* target T-state */ @@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) if (!pr) return -EINVAL; + + if (ignore_tpc) + goto end; + status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc); if (ACPI_FAILURE(status)) { if (status != AE_NOT_FOUND) { @@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) } return -ENODEV; } + +end: pr->throttling_platform_limit = (int)tpc; return 0; } @@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr) struct acpi_processor_limit *limit; int target_state; + if (ignore_tpc) + return 0; + result = acpi_processor_get_platform_limit(pr); if (result) { /* Throttling Limit is unsupported */ From 4973b22aa8c70fe036e3e0039f104cf5bb7fe2b1 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 11 May 2009 09:36:01 +0800 Subject: [PATCH 313/670] ACPI processor: reset the throttling state once it's invalid If the BIOS hands us an invalid throttling state, write a valid state. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui Tested-by: James Ettle Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 5f09fb8c0e05..7f16f5f8e7d3 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -838,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) ret = acpi_read_throttling_status(pr, &value); if (ret >= 0) { state = acpi_get_throttling_state(pr, value); + if (state == -1) { + ACPI_WARNING((AE_INFO, + "Invalid throttling state, reset\n")); + state = 0; + ret = acpi_processor_set_throttling(pr, state); + if (ret) + return ret; + } pr->throttling.state = state; } From 1406de8e11eb043681297adf86d6892ff8efc27a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 15 May 2009 21:12:57 -0700 Subject: [PATCH 314/670] Linux 2.6.30-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9b2b58c3b3db..b57e1f539e83 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Vindictive Armadillo # *DOCUMENTATION* From 520daf7217bc1806c02eb4cfa7805447a3da2f66 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 14 May 2009 17:27:38 -0400 Subject: [PATCH 315/670] ACPI: idle: fix init-time TSC check regression A previous 2.6.30 patch, a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2, (ACPI: idle: mark_tsc_unstable() at init-time, not run-time) erroneously disabled the TSC on systems that did not actually have valid deep C-states. Move the check after the deep-C-states are validated, via new helper, tsc_check_state(), hich replaces tsc_halts_in_c(). Signed-off-by: Len Brown Acked-by: Venkatesh Pallipadi Acked-by: Thomas Gleixner Tested-by: Frans Pop --- drivers/acpi/processor_idle.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f7ca8c55956b..e39a40a2ceae 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -216,7 +216,7 @@ int acpi_processor_resume(struct acpi_device * device) } #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) -static int tsc_halts_in_c(int state) +static void tsc_check_state(int state) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: @@ -226,13 +226,17 @@ static int tsc_halts_in_c(int state) * C/P/S0/S1 states when this bit is set. */ if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) - return 0; + return; /*FALL THROUGH*/ default: - return state > ACPI_STATE_C1; + /* TSC could halt in idle, so notify users */ + if (state > ACPI_STATE_C1) + mark_tsc_unstable("TSC halts in idle"); } } +#else +static void tsc_check_state(int state) { return; } #endif static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) @@ -581,11 +585,6 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC could halt in idle, so notify users */ - if (tsc_halts_in_c(cx->type)) - mark_tsc_unstable("TSC halts in idle");; -#endif switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; @@ -603,6 +602,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) acpi_timer_check_state(i, pr, cx); break; } + if (cx->valid) + tsc_check_state(cx->type); if (cx->valid) working++; From a0bf284bfedd6dc95bbee7ebf5ccf3b5f753a008 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 15 May 2009 01:29:31 -0400 Subject: [PATCH 316/670] ACPI: Idle C-states disabled by max_cstate should not disable the TSC Processor idle power states C2 and C3 stop the TSC on many machines. Linux recognizes this situation and marks the TSC as unstable: Marking TSC unstable due to TSC halts in idle But if those same machines are booted with "processor.max_cstate=1", then there is no need to validate C2 and C3, and no need to disable the TSC, which can be reliably used as a clocksource. Signed-off-by: Len Brown Acked-by: Thomas Gleixner --- drivers/acpi/processor_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index e39a40a2ceae..e65476fdf40d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -582,7 +582,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) pr->power.timer_broadcast_on_state = INT_MAX; - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; switch (cx->type) { From e102657ed16bbed49820d9c58509220fc8d9289a Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Sat, 16 May 2009 08:28:16 -0700 Subject: [PATCH 317/670] ARM: OMAP3: Fix number of GPIO lines for 34xx As per 3430 TRM, there are 6 banks [0 to 191] Signed-off-by: Tom Rix Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 17d7afe42b83..ee0b21f5b094 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; - if (cpu_is_omap34xx() && gpio < 160) + if (cpu_is_omap34xx() && gpio < 192) return 0; return -1; } From 8dbe43930a4e9bede88eb67a9c613773a2747caf Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Sat, 16 May 2009 08:28:17 -0700 Subject: [PATCH 318/670] ARM: OMAP3: Fix HW SAVEANDRESTORE shift define The OMAP3430ES2_SAVEANDRESTORE_SHIFT macro is used by powerdomain code in "1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT" manner, but the definition was also (1 << 4), meaning we actually modified bit 16. So the definition needs to be 4. This fixes also a cold reset HW bug in OMAP3430 ES3.x where some of the efuse bits are not isolated during wake-up from off mode. This can cause randomish cold resets with off mode. Enabling the USBTLL hardware SAVEANDRESTORE causes the core power up assert to be delayed in a way that we will not get faulty values when boot ROM is reading the unisolated registers. Signed-off-by: Kalle Jokiniemi Acked-by: Kevin Hilman Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm-regbits-34xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index c6a7940f4287..9fd03a2ec95c 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -409,7 +409,7 @@ /* PM_PREPWSTST_CAM specific bits */ /* PM_PWSTCTRL_USBHOST specific bits */ -#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4) +#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4 /* RM_RSTST_PER specific bits */ From 005187eecaa400b4b43d9f640fbde9fcc50f37c1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 16 May 2009 08:28:17 -0700 Subject: [PATCH 319/670] ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2 This makes the framebuffer work on omap3. Also fix the clk_get usage for checkpatch.pl "ERROR: do not use assignment in if condition". Cc: Imre Deak Cc: linux-fbdev-devel@lists.sourceforge.net Acked-by: Krzysztof Helt Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock24xx.c | 8 ++++---- arch/arm/mach-omap2/clock34xx.c | 10 +++++----- drivers/video/omap/dispc.c | 14 ++++++++------ drivers/video/omap/rfbi.c | 8 +++++--- 4 files changed, 22 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index ff9b4c0b00ae..e4cef333e291 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X), + CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index a0575393d0ea..ba05aa42bd8e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X), - CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X), - CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X), - CLK(NULL, "dss_ick", &dss_ick, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapfb", "ick", &dss_ick, CK_343X), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index dfb72f5e4c96..148cbcc39602 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -880,20 +880,22 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) static int get_dss_clocks(void) { - if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) { - dev_err(dispc.fbdev->dev, "can't get dss_ick\n"); + dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick"); + if (IS_ERR(dispc.dss_ick)) { + dev_err(dispc.fbdev->dev, "can't get ick\n"); return PTR_ERR(dispc.dss_ick); } - if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) { + dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck"); + if (IS_ERR(dispc.dss1_fck)) { dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); clk_put(dispc.dss_ick); return PTR_ERR(dispc.dss1_fck); } - if (IS_ERR((dispc.dss_54m_fck = - clk_get(dispc.fbdev->dev, "dss_54m_fck")))) { - dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n"); + dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck"); + if (IS_ERR(dispc.dss_54m_fck)) { + dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); clk_put(dispc.dss_ick); clk_put(dispc.dss1_fck); return PTR_ERR(dispc.dss_54m_fck); diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index a13c8dcad2a8..9332d6ca6456 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c @@ -83,12 +83,14 @@ static inline u32 rfbi_read_reg(int idx) static int rfbi_get_clocks(void) { - if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) { - dev_err(rfbi.fbdev->dev, "can't get dss_ick\n"); + rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick"); + if (IS_ERR(rfbi.dss_ick)) { + dev_err(rfbi.fbdev->dev, "can't get ick\n"); return PTR_ERR(rfbi.dss_ick); } - if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) { + rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck"); + if (IS_ERR(rfbi.dss1_fck)) { dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n"); clk_put(rfbi.dss_ick); return PTR_ERR(rfbi.dss1_fck); From 36999a5af1b6c5379e59f0ddf434db08d03c19e4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: [PATCH 320/670] ide-tape: remove back-to-back REQUEST_SENSE detection Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cb942a9b580f..3a53e0834cf7 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, { idetape_tape_t *tape = drive->driver_data; - if (drive->pc->c[0] == REQUEST_SENSE && - pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " - "Two request sense in serial were issued\n"); - } - if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) drive->failed_pc = pc; From b019447ce73513432af052f30fa239d6dc93e111 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 16 May 2009 19:03:36 +0200 Subject: [PATCH 321/670] icside: register second channel of version 6 PCB The second IDE channel of version 6 PCB is not being registered anymore since the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host (take 3)). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/icside.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 4e16ce68b063..36da913cc553 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -466,7 +466,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) struct ide_host *host; unsigned int sel = 0; int ret; - hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL }; + hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL }; struct ide_port_info d = icside_v6_port_info; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); From d8788298d491ee5026981eb751b0341a996b22e4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 16 May 2009 19:03:36 +0200 Subject: [PATCH 322/670] piix: The Sony TZ90 needs the cable type hardcoding The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox Reported-by: Jonathan E. Snow [bart: port it from ata_piix to piix and give reporter the proper credit] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/piix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index 2aa699933064..69860dea3820 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -263,6 +263,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ + { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */ /* end marker */ { 0, } }; From ff05c0330b9880f9ccbb7fa40f2ed3b5842f5693 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 7 May 2009 18:41:47 +0100 Subject: [PATCH 323/670] [ARM] 5509/1: ep93xx: clkdev enable UARTS Fix the clkdev API support for the ep93xx uart clocks. The uarts available in the ep93xx have individual clock controls. The current implementation assumes that the bootloader has enabled the clocks before the kernel has booted. It also assumes that the bootloader has set the UARTBAUD bit indicating that the uarts are running off the 14.7456MHz external crystal. This fixes both issues. It also allows the uart clocks to be stopped when there are no users. Tested-by: Matthias Kaehlcke Cc: Ryan Mallon Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/clock.c | 69 ++++++++++++++++--- .../mach-ep93xx/include/mach/ep93xx-regs.h | 5 +- 2 files changed, 65 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index e8ebeaea6c48..b2eede5531c8 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -21,15 +21,50 @@ #include #include + +/* + * The EP93xx has two external crystal oscillators. To generate the + * required high-frequency clocks, the processor uses two phase-locked- + * loops (PLLs) to multiply the incoming external clock signal to much + * higher frequencies that are then divided down by programmable dividers + * to produce the needed clocks. The PLLs operate independently of one + * another. + */ +#define EP93XX_EXT_CLK_RATE 14745600 +#define EP93XX_EXT_RTC_RATE 32768 + + struct clk { unsigned long rate; int users; + int sw_locked; u32 enable_reg; u32 enable_mask; + + unsigned long (*get_rate)(struct clk *clk); }; -static struct clk clk_uart = { - .rate = 14745600, + +static unsigned long get_uart_rate(struct clk *clk); + + +static struct clk clk_uart1 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart2 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart3 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN, + .get_rate = get_uart_rate, }; static struct clk clk_pll1; static struct clk clk_f; @@ -95,9 +130,9 @@ static struct clk clk_m2m1 = { { .dev_id = dev, .con_id = con, .clk = ck } static struct clk_lookup clocks[] = { - INIT_CK("apb:uart1", NULL, &clk_uart), - INIT_CK("apb:uart2", NULL, &clk_uart), - INIT_CK("apb:uart3", NULL, &clk_uart), + INIT_CK("apb:uart1", NULL, &clk_uart1), + INIT_CK("apb:uart2", NULL, &clk_uart2), + INIT_CK("apb:uart3", NULL, &clk_uart3), INIT_CK(NULL, "pll1", &clk_pll1), INIT_CK(NULL, "fclk", &clk_f), INIT_CK(NULL, "hclk", &clk_h), @@ -125,6 +160,8 @@ int clk_enable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value | clk->enable_mask, clk->enable_reg); } @@ -138,13 +175,29 @@ void clk_disable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value & ~clk->enable_mask, clk->enable_reg); } } EXPORT_SYMBOL(clk_disable); +static unsigned long get_uart_rate(struct clk *clk) +{ + u32 value; + + value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL); + if (value & EP93XX_SYSCON_CLOCK_UARTBAUD) + return EP93XX_EXT_CLK_RATE; + else + return EP93XX_EXT_CLK_RATE / 2; +} + unsigned long clk_get_rate(struct clk *clk) { + if (clk->get_rate) + return clk->get_rate(clk); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word) unsigned long long rate; int i; - rate = 14745600; + rate = EP93XX_EXT_CLK_RATE; rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ @@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1); if (!(value & 0x00800000)) { /* PLL1 bypassed? */ - clk_pll1.rate = 14745600; + clk_pll1.rate = EP93XX_EXT_CLK_RATE; } else { clk_pll1.rate = calc_pll_rate(value); } @@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2); if (!(value & 0x00080000)) { /* PLL2 bypassed? */ - clk_pll2.rate = 14745600; + clk_pll2.rate = EP93XX_EXT_CLK_RATE; } else if (value & 0x00040000) { /* PLL2 enabled? */ clk_pll2.rate = calc_pll_rate(value); } else { diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index f66be12b856e..1732de7629a5 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -159,7 +159,10 @@ #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) #define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) #define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 +#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23) +#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) #define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) From 776abac81764847338a6a02c34609d4b8dfb4918 Mon Sep 17 00:00:00 2001 From: Ricardo Martins Date: Mon, 11 May 2009 00:15:08 +0100 Subject: [PATCH 324/670] [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error Compilation for this board yields the following errors: arch/arm/mach-pxa/viper.c:511: error: 'FFUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:520: error: 'BTUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:529: error: 'STUART' undeclared here (not in a function) Fix them by including the necessary header. Signed-off-by: Ricardo Martins Signed-off-by: Russell King --- arch/arm/mach-pxa/viper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 0e65344e9f53..dd031cc41847 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include From 0f6f49a8cd0163fdb1723ed29f01fc65177108dc Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 May 2009 13:41:28 -0700 Subject: [PATCH 325/670] Fix caller information for warn_slowpath_null Ian Campbell noticed that since "Eliminate thousands of warnings with gcc 3.2 build" (commit 57adc4d2dbf968fdbe516359688094eef4d46581) all WARN_ON()'s currently appear to come from warn_slowpath_null(), eg: WARNING: at kernel/softirq.c:143 warn_slowpath_null+0x1c/0x20() because now that warn_slowpath_null() is in the call path, the __builtin_return_address(0) returns that, rather than the place that caused the warning. Fix this by splitting up the warn_slowpath_null/fmt cases differently, using a common helper function, and getting the return address in the right place. This also happens to avoid the unnecessary stack usage for the non-stdargs case, and just generally cleans things up. Make the function name printout use %pS while at it. Cc: Ian Campbell Cc: Jesper Nilsson Cc: Johannes Weiner Cc: Arjan van de Ven Cc: Andi Kleen Cc: Hugh Dickins Cc: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/panic.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-) diff --git a/kernel/panic.c b/kernel/panic.c index 874ecf1307ae..984b3ecbd72c 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -340,39 +340,44 @@ void oops_exit(void) } #ifdef WANT_WARN_ON_SLOWPATH -void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) -{ +struct slowpath_args { + const char *fmt; va_list args; - char function[KSYM_SYMBOL_LEN]; - unsigned long caller = (unsigned long)__builtin_return_address(0); +}; + +static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args) +{ const char *board; - sprint_symbol(function, caller); - printk(KERN_WARNING "------------[ cut here ]------------\n"); - printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file, - line, function); + printk(KERN_WARNING "WARNING: at %s:%d %pS()\n", file, line, caller); board = dmi_get_system_info(DMI_PRODUCT_NAME); if (board) printk(KERN_WARNING "Hardware name: %s\n", board); - if (*fmt) { - va_start(args, fmt); - vprintk(fmt, args); - va_end(args); - } + if (args) + vprintk(args->fmt, args->args); print_modules(); dump_stack(); print_oops_end_marker(); add_taint(TAINT_WARN); } + +void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) +{ + struct slowpath_args args; + + args.fmt = fmt; + va_start(args.args, fmt); + warn_slowpath_common(file, line, __builtin_return_address(0), &args); + va_end(args.args); +} EXPORT_SYMBOL(warn_slowpath_fmt); void warn_slowpath_null(const char *file, int line) { - static const char *empty = ""; - warn_slowpath_fmt(file, line, empty); + warn_slowpath_common(file, line, __builtin_return_address(0), NULL); } EXPORT_SYMBOL(warn_slowpath_null); #endif From 826681043d7184b4d650cab5b007b9a86b628eb5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 16:20:18 +0100 Subject: [PATCH 326/670] [ARM] smp: fix cpumask usage in ARM SMP code The ARM SMP code wasn't properly updated for the cpumask changes, which results in smp_timer_broadcast() broadcasting ticks to non-online CPUs. Signed-off-by: Russell King --- arch/arm/common/gic.c | 4 +- arch/arm/include/asm/hardware/gic.h | 2 +- arch/arm/include/asm/smp.h | 12 ++---- arch/arm/kernel/smp.c | 46 ++++++++--------------- arch/arm/mach-realview/include/mach/smp.h | 6 +-- arch/arm/mach-realview/platsmp.c | 4 +- 6 files changed, 28 insertions(+), 46 deletions(-) diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index c6884ba1d5ed..3e1714c6523f 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) } #ifdef CONFIG_SMP -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq) +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(cpumask); + unsigned long map = *cpus_addr(*mask); /* this always happens on GIC0 */ writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 4924914af188..7f34333bb545 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -36,7 +36,7 @@ void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); void gic_cpu_init(unsigned int gic_nr, void __iomem *base); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); #endif #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index fad70da5911d..5995935338e1 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid); /* * Raise an IPI cross call on CPUs in callmap. */ -extern void smp_cross_call(cpumask_t callmap); - -/* - * Broadcast a timer interrupt to the other CPUs. - */ -extern void smp_send_timer(void); +extern void smp_cross_call(const struct cpumask *mask); /* * Broadcast a clock event to other CPUs. */ -extern void smp_timer_broadcast(cpumask_t mask); +extern void smp_timer_broadcast(const struct cpumask *mask); /* * Boot a secondary CPU, and assign it the specified idle task. @@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu); extern void platform_cpu_enable(unsigned int cpu); extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask /* * Local timer interrupt handling function (can be IPI'ed). diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 7801aac3c043..6014dfd22af4 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void) per_cpu(cpu_data, cpu).idle = current; } -static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) +static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg) { unsigned long flags; unsigned int cpu; local_irq_save(flags); - for_each_cpu_mask(cpu, callmap) { + for_each_cpu(cpu, mask) { struct ipi_data *ipi = &per_cpu(ipi_data, cpu); spin_lock(&ipi->lock); @@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) /* * Call the platform specific cross-CPU call function. */ - smp_cross_call(callmap); + smp_cross_call(mask); local_irq_restore(flags); } -void arch_send_call_function_ipi(cpumask_t mask) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { send_ipi_message(mask, IPI_CALL_FUNC); } void arch_send_call_function_single_ipi(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE); + send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); } void show_ipi_list(struct seq_file *p) @@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs) void smp_send_reschedule(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE); + send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); } -void smp_send_timer(void) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_TIMER); -} - -void smp_timer_broadcast(cpumask_t mask) +void smp_timer_broadcast(const struct cpumask *mask) { send_ipi_message(mask, IPI_TIMER); } @@ -517,7 +510,7 @@ void smp_send_stop(void) { cpumask_t mask = cpu_online_map; cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_CPU_STOP); + send_ipi_message(&mask, IPI_CPU_STOP); } /* @@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier) return -EINVAL; } -static int -on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask) +static void +on_each_cpu_mask(void (*func)(void *), void *info, int wait, + const struct cpumask *mask) { - int ret = 0; - preempt_disable(); - ret = smp_call_function_mask(mask, func, info, wait); - if (cpu_isset(smp_processor_id(), mask)) + smp_call_function_many(mask, func, info, wait); + if (cpumask_test_cpu(smp_processor_id(), mask)) func(info); preempt_enable(); - - return ret; } /**********************************************************************/ @@ -602,20 +592,17 @@ void flush_tlb_all(void) void flush_tlb_mm(struct mm_struct *mm) { - cpumask_t mask = mm->cpu_vm_mask; - - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = uaddr; - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_page(unsigned long kaddr) @@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr) void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = start; ta.ta_end = end; - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index 515819efd046..e2ff53402f8c 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -15,15 +15,15 @@ /* * We use IRQ1 as the IPI */ -static inline void smp_cross_call(cpumask_t callmap) +static inline void smp_cross_call(const struct cpumask *mask) { - gic_raise_softirq(callmap, 1); + gic_raise_softirq(mask, 1); } /* * Do nothing on MPcore. */ -static inline void smp_cross_call_done(cpumask_t callmap) +static inline void smp_cross_call_done(const struct cpumask *mask) { } diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index ea3c75595fa9..a5730466dff5 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -82,7 +82,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * to get this processor out of WFI in the BootMonitor - make * sure that we are no longer being sent this soft interrupt */ - smp_cross_call_done(cpumask_of_cpu(cpu)); + smp_cross_call_done(cpumask_of(cpu)); /* * if any interrupts are already enabled for the primary @@ -136,7 +136,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Use smp_cross_call() for this, since there's little * point duplicating the code here */ - smp_cross_call(cpumask_of_cpu(cpu)); + smp_cross_call(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { From 78d236c2b30d4712c1fd8c9768b163c94b39e77d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 16:23:45 +0100 Subject: [PATCH 327/670] [ARM] realview: remove useless smp_cross_call_done() smp_cross_call_done() is a no-op for MPCore, and since it's only used by platform code, there's no point in having it unless it's doing something. Signed-off-by: Russell King --- arch/arm/mach-realview/include/mach/smp.h | 7 ------- arch/arm/mach-realview/platsmp.c | 7 ------- 2 files changed, 14 deletions(-) diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index e2ff53402f8c..dd53892d44a7 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -20,11 +20,4 @@ static inline void smp_cross_call(const struct cpumask *mask) gic_raise_softirq(mask, 1); } -/* - * Do nothing on MPcore. - */ -static inline void smp_cross_call_done(const struct cpumask *mask) -{ -} - #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a5730466dff5..b037fd6c82dc 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) { trace_hardirqs_off(); - /* - * the primary core may have used a "cross call" soft interrupt - * to get this processor out of WFI in the BootMonitor - make - * sure that we are no longer being sent this soft interrupt - */ - smp_cross_call_done(cpumask_of(cpu)); - /* * if any interrupts are already enabled for the primary * core (e.g. timer irq), then they will not have been enabled From ee348d5a1d810bc9958cabb7c27302aab235d36e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 17:00:47 +0100 Subject: [PATCH 328/670] [ARM] realview: fix broadcast tick support Having discussed broadcast tick support with Thomas Glexiner, the broadcast tick devices should be registered with a higher rating than the global tick device, and it should have the ONESHOT and PERIODIC feature flags set. Signed-off-by: Russell King Acked-by: Thomas Glexiner --- arch/arm/mach-realview/core.c | 8 -------- arch/arm/mach-realview/localtimer.c | 6 ++++-- arch/arm/mach-realview/platsmp.c | 6 ++---- 3 files changed, 6 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 942e1a7eb9b2..076acbc50706 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; -#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST - /* - * The dummy clock device has to be registered before the main device - * so that the latter will broadcast the clock events - */ - local_timer_setup(); -#endif - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index d0d39adf6407..1c01d13460f0 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void) struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); clk->name = "dummy_timer"; - clk->features = CLOCK_EVT_FEAT_DUMMY; - clk->rating = 200; + clk->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DUMMY; + clk->rating = 400; clk->mult = 1; clk->set_mode = dummy_timer_set_mode; clk->broadcast = smp_timer_broadcast; diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index b037fd6c82dc..30a9c68591f6 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -217,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; -#ifdef CONFIG_LOCAL_TIMERS +#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) /* - * Enable the local timer for primary CPU. If the device is - * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in - * realview_timer_init + * Enable the local timer or broadcast device for the boot CPU. */ local_timer_setup(); #endif From 12abb35a03e32c97235fcefdcf2d851be9f82dc2 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 17 May 2009 01:02:01 -0400 Subject: [PATCH 329/670] reiserfs: clean up ifdefs With xattr cleanup even with xattrs disabled, much of the initial setup is still performed. Some #ifdefs are just not needed since the options they protect wouldn't be available anyway. This cleans those up. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/reiserfs/xattr.c | 45 ++++++++++++++++++++++----------------------- 1 file changed, 22 insertions(+), 23 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 2237e10c7c7c..cf949646dd57 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -685,20 +685,6 @@ out: return err; } -/* Actual operations that are exported to VFS-land */ -struct xattr_handler *reiserfs_xattr_handlers[] = { - &reiserfs_xattr_user_handler, - &reiserfs_xattr_trusted_handler, -#ifdef CONFIG_REISERFS_FS_SECURITY - &reiserfs_xattr_security_handler, -#endif -#ifdef CONFIG_REISERFS_FS_POSIX_ACL - &reiserfs_posix_acl_access_handler, - &reiserfs_posix_acl_default_handler, -#endif - NULL -}; - /* * In order to implement different sets of xattr operations for each xattr * prefix with the generic xattr API, a filesystem should create a @@ -922,6 +908,28 @@ static int create_privroot(struct dentry *dentry) return 0; } +#else +int __init reiserfs_xattr_register_handlers(void) { return 0; } +void reiserfs_xattr_unregister_handlers(void) {} +static int create_privroot(struct dentry *dentry) { return 0; } +#endif + +/* Actual operations that are exported to VFS-land */ +struct xattr_handler *reiserfs_xattr_handlers[] = { +#ifdef CONFIG_REISERFS_FS_XATTR + &reiserfs_xattr_user_handler, + &reiserfs_xattr_trusted_handler, +#endif +#ifdef CONFIG_REISERFS_FS_SECURITY + &reiserfs_xattr_security_handler, +#endif +#ifdef CONFIG_REISERFS_FS_POSIX_ACL + &reiserfs_posix_acl_access_handler, + &reiserfs_posix_acl_default_handler, +#endif + NULL +}; + static int xattr_mount_check(struct super_block *s) { /* We need generation numbers to ensure that the oid mapping is correct @@ -941,11 +949,6 @@ static int xattr_mount_check(struct super_block *s) return 0; } -#else -int __init reiserfs_xattr_register_handlers(void) { return 0; } -void reiserfs_xattr_unregister_handlers(void) {} -#endif - /* This will catch lookups from the fs root to .reiserfs_priv */ static int xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name) @@ -992,7 +995,6 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags) int err = 0; struct dentry *privroot = REISERFS_SB(s)->priv_root; -#ifdef CONFIG_REISERFS_FS_XATTR err = xattr_mount_check(s); if (err) goto error; @@ -1023,14 +1025,11 @@ error: clear_bit(REISERFS_XATTRS_USER, &(REISERFS_SB(s)->s_mount_opt)); clear_bit(REISERFS_POSIXACL, &(REISERFS_SB(s)->s_mount_opt)); } -#endif /* The super_block MS_POSIXACL must mirror the (no)acl mount option. */ -#ifdef CONFIG_REISERFS_FS_POSIX_ACL if (reiserfs_posixacl(s)) s->s_flags |= MS_POSIXACL; else -#endif s->s_flags &= ~MS_POSIXACL; return err; From ceb5edc457f07956c82dccfb54ca8ae7e2a399f0 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 17 May 2009 01:02:02 -0400 Subject: [PATCH 330/670] reiserfs: deal with NULL xattr root w/ xattrs disabled This avoids an Oops in open_xa_root that can occur when deleting a file with xattrs disabled. It assumes that the xattr root will be there, and that is not guaranteed. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/reiserfs/super.c | 2 -- fs/reiserfs/xattr.c | 4 +++- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 1215a4f50cd2..3567fb9e3fb1 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -448,13 +448,11 @@ int remove_save_link(struct inode *inode, int truncate) static void reiserfs_kill_sb(struct super_block *s) { if (REISERFS_SB(s)) { -#ifdef CONFIG_REISERFS_FS_XATTR if (REISERFS_SB(s)->xattr_root) { d_invalidate(REISERFS_SB(s)->xattr_root); dput(REISERFS_SB(s)->xattr_root); REISERFS_SB(s)->xattr_root = NULL; } -#endif if (REISERFS_SB(s)->priv_root) { d_invalidate(REISERFS_SB(s)->priv_root); dput(REISERFS_SB(s)->priv_root); diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index cf949646dd57..628075ca82c1 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -123,7 +123,9 @@ static struct dentry *open_xa_root(struct super_block *sb, int flags) mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR); xaroot = dget(REISERFS_SB(sb)->xattr_root); - if (!xaroot->d_inode) { + if (!xaroot) + xaroot = ERR_PTR(-ENODATA); + else if (!xaroot->d_inode) { int err = -ENODATA; if (xattr_may_create(flags)) err = xattr_mkdir(privroot->d_inode, xaroot, 0700); From b83674c0da6558e357c6b482ccf299eeea77d8ef Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 17 May 2009 01:02:03 -0400 Subject: [PATCH 331/670] reiserfs: fixup perms when xattrs are disabled This adds CONFIG_REISERFS_FS_XATTR protection from reiserfs_permission. This is needed to avoid warnings during file deletions and chowns with xattrs disabled. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/reiserfs/xattr.c | 36 ++++++++++++++++++---------------- include/linux/reiserfs_xattr.h | 4 +--- 2 files changed, 20 insertions(+), 20 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 628075ca82c1..8e7deb0e6964 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -871,23 +871,6 @@ static int reiserfs_check_acl(struct inode *inode, int mask) return error; } -int reiserfs_permission(struct inode *inode, int mask) -{ - /* - * We don't do permission checks on the internal objects. - * Permissions are determined by the "owning" object. - */ - if (IS_PRIVATE(inode)) - return 0; - /* - * Stat data v1 doesn't support ACLs. - */ - if (get_inode_sd_version(inode) == STAT_DATA_V1) - return generic_permission(inode, mask, NULL); - else - return generic_permission(inode, mask, reiserfs_check_acl); -} - static int create_privroot(struct dentry *dentry) { int err; @@ -951,6 +934,25 @@ static int xattr_mount_check(struct super_block *s) return 0; } +int reiserfs_permission(struct inode *inode, int mask) +{ + /* + * We don't do permission checks on the internal objects. + * Permissions are determined by the "owning" object. + */ + if (IS_PRIVATE(inode)) + return 0; + +#ifdef CONFIG_REISERFS_FS_XATTR + /* + * Stat data v1 doesn't support ACLs. + */ + if (get_inode_sd_version(inode) != STAT_DATA_V1) + return generic_permission(inode, mask, reiserfs_check_acl); +#endif + return generic_permission(inode, mask, NULL); +} + /* This will catch lookups from the fs root to .reiserfs_priv */ static int xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name) diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h index cdedc01036e4..99928dce37ea 100644 --- a/include/linux/reiserfs_xattr.h +++ b/include/linux/reiserfs_xattr.h @@ -41,6 +41,7 @@ int reiserfs_xattr_init(struct super_block *sb, int mount_flags); int reiserfs_lookup_privroot(struct super_block *sb); int reiserfs_delete_xattrs(struct inode *inode); int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs); +int reiserfs_permission(struct inode *inode, int mask); #ifdef CONFIG_REISERFS_FS_XATTR #define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir) @@ -50,7 +51,6 @@ int reiserfs_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags); ssize_t reiserfs_listxattr(struct dentry *dentry, char *buffer, size_t size); int reiserfs_removexattr(struct dentry *dentry, const char *name); -int reiserfs_permission(struct inode *inode, int mask); int reiserfs_xattr_get(struct inode *, const char *, void *, size_t); int reiserfs_xattr_set(struct inode *, const char *, const void *, size_t, int); @@ -117,8 +117,6 @@ static inline void reiserfs_init_xattr_rwsem(struct inode *inode) #define reiserfs_listxattr NULL #define reiserfs_removexattr NULL -#define reiserfs_permission NULL - static inline void reiserfs_init_xattr_rwsem(struct inode *inode) { } From 22ef37eed673587ac984965dc88ba94c68873291 Mon Sep 17 00:00:00 2001 From: Toshiyuki Okajima Date: Sat, 16 May 2009 22:56:28 -0700 Subject: [PATCH 332/670] page-writeback: fix the calculation of the oldest_jif in wb_kupdate() wb_kupdate() function has a bug on linux-2.6.30-rc5. This bug causes generic_sync_sb_inodes() to start to write inodes back much earlier than our expectations because it miscalculates oldest_jif in wb_kupdate(). This bug was introduced in 704503d836042d4a4c7685b7036e7de0418fbc0f ('mm: fix proc_dointvec_userhz_jiffies "breakage"'). Signed-off-by: Toshiyuki Okajima Cc: Alexey Dobriyan Cc: Peter Zijlstra Cc: Nick Piggin Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page-writeback.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 30351f0063ac..bb553c3e955d 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -94,12 +94,12 @@ unsigned long vm_dirty_bytes; /* * The interval between `kupdate'-style writebacks */ -unsigned int dirty_writeback_interval = 5 * 100; /* sentiseconds */ +unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */ /* * The longest time for which data is allowed to remain dirty */ -unsigned int dirty_expire_interval = 30 * 100; /* sentiseconds */ +unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */ /* * Flag that makes the machine dump writes/reads and block dirtyings. @@ -770,7 +770,7 @@ static void wb_kupdate(unsigned long arg) sync_supers(); - oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval); + oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10); start_jif = jiffies; next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10); nr_to_write = global_page_state(NR_FILE_DIRTY) + From 5e392739d6ab72f7c35040aa07f4097904bce6e7 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Mon, 11 May 2009 00:36:35 +0000 Subject: [PATCH 333/670] netpoll: don't dereference NULL dev from np It looks like the dev in netpoll_poll can be NULL - at lease it's checked at the function beginning. Thus the dev->netde_ops dereference looks dangerous. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/core/netpoll.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index b5873bdff612..64f51eec6576 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -175,9 +175,13 @@ static void service_arp_queue(struct netpoll_info *npi) void netpoll_poll(struct netpoll *np) { struct net_device *dev = np->dev; - const struct net_device_ops *ops = dev->netdev_ops; + const struct net_device_ops *ops; - if (!dev || !netif_running(dev) || !ops->ndo_poll_controller) + if (!dev || !netif_running(dev)) + return; + + ops = dev->netdev_ops; + if (!ops->ndo_poll_controller) return; /* Process pending work on NIC */ From 2513dfb83fc775364fe85803d3a84d7ebe5763a5 Mon Sep 17 00:00:00 2001 From: Chris Friesen Date: Sun, 17 May 2009 20:39:33 -0700 Subject: [PATCH 334/670] ipconfig: handle case of delayed DHCP server If a DHCP server is delayed, it's possible for the client to receive the DHCPOFFER after it has already sent out a new DHCPDISCOVER message from a second interface. The client then sends out a DHCPREQUEST from the second interface, but the server doesn't recognize the device and rejects the request. This patch simply tracks the current device being configured and throws away the OFFER if it is not intended for the current device. A more sophisticated approach would be to put the OFFER information into the struct ic_device rather than storing it globally. Signed-off-by: Chris Friesen Signed-off-by: David S. Miller --- net/ipv4/ipconfig.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 90d22ae0a419..88bf051d0cbb 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -139,6 +139,8 @@ __be32 ic_servaddr = NONE; /* Boot server IP address */ __be32 root_server_addr = NONE; /* Address of NFS server */ u8 root_server_path[256] = { 0, }; /* Path to mount as root */ +u32 ic_dev_xid; /* Device under configuration */ + /* vendor class identifier */ static char vendor_class_identifier[253] __initdata; @@ -932,6 +934,13 @@ static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, str goto drop_unlock; } + /* Is it a reply for the device we are configuring? */ + if (b->xid != ic_dev_xid) { + if (net_ratelimit()) + printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet \n"); + goto drop_unlock; + } + /* Parse extensions */ if (ext_len >= 4 && !memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */ @@ -1115,6 +1124,9 @@ static int __init ic_dynamic(void) get_random_bytes(&timeout, sizeof(timeout)); timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned) CONF_TIMEOUT_RANDOM); for (;;) { + /* Track the device we are configuring */ + ic_dev_xid = d->xid; + #ifdef IPCONFIG_BOOTP if (do_bootp && (d->able & IC_BOOTP)) ic_bootp_send_if(d, jiffies - start_jiffies); From 72876a603422d3767273ffb3918033fa1bfda0f3 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Sun, 17 May 2009 20:48:59 -0700 Subject: [PATCH 335/670] mlx4_en: Fix not deleted napi structures Napi structures are being created each time we open a port, but when the port is closed the napi structure is only disabled but not removed. This bug caused hang while removing the driver. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_cq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c index 91f50de84be9..a276125b709b 100644 --- a/drivers/net/mlx4/en_cq.c +++ b/drivers/net/mlx4/en_cq.c @@ -125,8 +125,10 @@ void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) if (cq->is_tx) del_timer(&cq->timer); - else + else { napi_disable(&cq->napi); + netif_napi_del(&cq->napi); + } mlx4_cq_free(mdev->dev, &cq->mcq); } From a8f492c6ac6072d6c5bce4b2f13dc44612991051 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 16 May 2009 01:21:58 +0000 Subject: [PATCH 336/670] NET: Meth: Fix unsafe mix of irq and non-irq spinlocks. Mixing of normal and irq spinlocks results in the following lockdep messages on bootup on IP32: [...] Sending DHCP requests . ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.30-rc5-00164-g41baeef #30 ------------------------------------------------------ swapper/1 [HC0[0]:SC0[1]:HE0:SE0] is trying to acquire: (&priv->meth_lock){+.+...}, at: [] meth_tx+0x48/0x43c and this task is already holding: (_xmit_ETHER#2){+.-...}, at: [] __qdisc_run+0x118/0x30c which would create a new lock dependency: (_xmit_ETHER#2){+.-...} -> (&priv->meth_lock){+.+...} but this new dependency connects a SOFTIRQ-irq-safe lock: (_xmit_ETHER#2){+.-...} ... which became SOFTIRQ-irq-safe at: [] __lock_acquire+0x784/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 to a SOFTIRQ-irq-unsafe lock: (&priv->meth_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [] __lock_acquire+0x824/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 other info that might help us debug this: 2 locks held by swapper/1: #0: (rcu_read_lock){.+.+..}, at: [] dev_queue_xmit+0x1e0/0x4b0 #1: (_xmit_ETHER#2){+.-...}, at: [] __qdisc_run+0x118/0x30c the SOFTIRQ-irq-safe lock's dependencies: -> (_xmit_ETHER#2){+.-...} ops: 0 { HARDIRQ-ON-W at: [] __lock_acquire+0x7fc/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 IN-SOFTIRQ-W at: [] __lock_acquire+0x784/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 INITIAL USE at: [] __lock_acquire+0x89c/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 } ... key at: [] netdev_xmit_lock_key+0x8/0x1c8 the SOFTIRQ-irq-unsafe lock's dependencies: -> (&priv->meth_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [] __lock_acquire+0x7fc/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 SOFTIRQ-ON-W at: [] __lock_acquire+0x824/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 INITIAL USE at: [] __lock_acquire+0x89c/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 } ... key at: [] __key.32424+0x0/0x8 stack backtrace: Call Trace: [] dump_stack+0x8/0x34 [] check_usage+0x470/0x4a0 [] check_irq_usage+0x90/0x130 [] __lock_acquire+0x12a4/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock_irqsave+0x60/0x84 [] meth_tx+0x48/0x43c [] __qdisc_run+0x150/0x30c [] dev_queue_xmit+0x334/0x4b0 [] ip_auto_config+0x8d0/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 ..... timed out! IP-Config: Retrying forever (NFS root)... Sending DHCP requests ., OK [...] Fixed by converting all locks to irq locks. Signed-off-by: Ralf Baechle Tested-by: Andrew Randrianasulu Signed-off-by: David S. Miller --- drivers/net/meth.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/net/meth.c b/drivers/net/meth.c index aa08987f6e81..dbd3436912b8 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -127,11 +127,11 @@ static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg) static int mdio_probe(struct meth_private *priv) { int i; - unsigned long p2, p3; + unsigned long p2, p3, flags; /* check if phy is detected already */ if(priv->phy_addr>=0&&priv->phy_addr<32) return 0; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); for (i=0;i<32;++i){ priv->phy_addr=i; p2=mdio_read(priv,2); @@ -157,7 +157,7 @@ static int mdio_probe(struct meth_private *priv) break; } } - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); if(priv->phy_addr<32) { return 0; } @@ -373,14 +373,14 @@ static int meth_release(struct net_device *dev) static void meth_rx(struct net_device* dev, unsigned long int_status) { struct sk_buff *skb; - unsigned long status; + unsigned long status, flags; struct meth_private *priv = netdev_priv(dev); unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); priv->dma_ctrl &= ~METH_DMA_RX_INT_EN; mace->eth.dma_ctrl = priv->dma_ctrl; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); if (int_status & METH_INT_RX_UNDERFLOW) { fifo_rptr = (fifo_rptr - 1) & 0x0f; @@ -452,12 +452,12 @@ static void meth_rx(struct net_device* dev, unsigned long int_status) mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write]; ADVANCE_RX_PTR(priv->rx_write); } - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); /* In case there was underflow, and Rx DMA was disabled */ priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN; mace->eth.dma_ctrl = priv->dma_ctrl; mace->eth.int_stat = METH_INT_RX_THRESHOLD; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } static int meth_tx_full(struct net_device *dev) @@ -470,11 +470,11 @@ static int meth_tx_full(struct net_device *dev) static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) { struct meth_private *priv = netdev_priv(dev); - unsigned long status; + unsigned long status, flags; struct sk_buff *skb; unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); /* Stop DMA notification */ priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN); @@ -527,12 +527,13 @@ static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) } mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } static void meth_error(struct net_device* dev, unsigned status) { struct meth_private *priv = netdev_priv(dev); + unsigned long flags; printk(KERN_WARNING "meth: error status: 0x%08x\n",status); /* check for errors too... */ @@ -547,7 +548,7 @@ static void meth_error(struct net_device* dev, unsigned status) printk(KERN_WARNING "meth: Rx overflow\n"); if (status & (METH_INT_RX_UNDERFLOW)) { printk(KERN_WARNING "meth: Rx underflow\n"); - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); mace->eth.int_stat = METH_INT_RX_UNDERFLOW; /* more underflow interrupts will be delivered, * effectively throwing us into an infinite loop. @@ -555,7 +556,7 @@ static void meth_error(struct net_device* dev, unsigned status) priv->dma_ctrl &= ~METH_DMA_RX_EN; mace->eth.dma_ctrl = priv->dma_ctrl; DPRINTK("Disabled meth Rx DMA temporarily\n"); - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } mace->eth.int_stat = METH_INT_ERROR; } From a598f6aebea2481531b0757ed90cfb0d8cf1d8f5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 15 May 2009 06:10:13 +0000 Subject: [PATCH 337/670] bridge: relay bridge multicast pkgs if !STP Currently the bridge catches all STP packets; even if STP is turned off. This prevents other systems (which do have STP turned on) from being able to detect loops in the network. With this patch, if STP is off, then any packet sent to the STP multicast group address is forwarded to all ports. Based on earlier patch by Joakim Tjernlund with changes to go through forwarding (not local chain), and optimization that only last octet needs to be checked. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_input.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 30b88777c3df..5ee1a3682bf2 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -134,6 +134,10 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb) if (skb->protocol == htons(ETH_P_PAUSE)) goto drop; + /* If STP is turned off, then forward */ + if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0) + goto forward; + if (NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev, NULL, br_handle_local_finish)) return NULL; /* frame consumed by filter */ @@ -141,6 +145,7 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb) return skb; /* continue processing */ } +forward: switch (p->state) { case BR_STATE_FORWARDING: rhook = rcu_dereference(br_should_route_hook); From 4f0611af47e25807cf18cd2b4d4e94206c75b29e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 15 May 2009 06:11:58 +0000 Subject: [PATCH 338/670] bridge: fix initial packet flood if !STP If bridge is configured with no STP and forwarding delay of 0 (which is typical for virtualization) then when link starts it will flood all packets for the first 20 seconds. This bug was introduced by a combination of earlier changes: * forwarding database uses hold time of zero to indicate user wants to always flood packets * optimzation of the case of forwarding delay of 0 avoids the initial timer tick The fix is to just skip all the topology change detection code if kernel STP is not being used. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_stp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index 6e63ec3f1fcf..0660515f3992 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -297,6 +297,9 @@ void br_topology_change_detection(struct net_bridge *br) { int isroot = br_is_root_bridge(br); + if (br->stp_enabled != BR_KERNEL_STP) + return; + pr_info("%s: topology change detected, %s\n", br->dev->name, isroot ? "propagating" : "sending tcn bpdu"); From 4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 15 May 2009 08:44:32 +0000 Subject: [PATCH 339/670] bonding: fix link down handling in 802.3ad mode One of the purposes of bonding is to allow for redundant links, and failover correctly if the cable is pulled. If all the members of a bonded device have no carrier present, the bonded device itself needs to report no carrier present to user space so management tools (like routing daemons) can respond. Bonding in 802.3ad mode does not work correctly for this because it incorrectly chooses a link that is down as a possible aggregator. Signed-off-by: Stephen Hemminger Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 8c2e5ab51f08..faf094abef7f 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1465,6 +1465,12 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, return best; } +static int agg_device_up(const struct aggregator *agg) +{ + return (netif_running(agg->slave->dev) && + netif_carrier_ok(agg->slave->dev)); +} + /** * ad_agg_selection_logic - select an aggregation group for a team * @aggregator: the aggregator we're looking at @@ -1496,14 +1502,13 @@ static void ad_agg_selection_logic(struct aggregator *agg) struct port *port; origin = agg; - active = __get_active_agg(agg); - best = active; + best = (active && agg_device_up(active)) ? active : NULL; do { agg->is_active = 0; - if (agg->num_of_ports) + if (agg->num_of_ports && agg_device_up(agg)) best = ad_agg_selection_test(best, agg); } while ((agg = __get_next_agg(agg))); From eb0519b5a1cf07d5a1b919cffa0304cdaaa97a7e Mon Sep 17 00:00:00 2001 From: Gabriel Paubert Date: Sun, 17 May 2009 21:16:47 -0700 Subject: [PATCH 340/670] mv643xx_eth: fix PPC DMA breakage After 2.6.29, PPC no more admits passing NULL to the dev parameter of the DMA API. The result is a BUG followed by solid lock-up when the mv643xx_eth driver brings an interface up. The following patch makes the driver work on my Pegasos again; it is mostly a search and replace of NULL by mp->dev->dev.parent in dma allocation/freeing/mapping/unmapping functions. Signed-off-by: Gabriel Paubert Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 41 +++++++++++++++++++++------------------ 1 file changed, 22 insertions(+), 19 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a400d7115f78..6bb5af35eda6 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -569,7 +569,7 @@ static int rxq_process(struct rx_queue *rxq, int budget) if (rxq->rx_curr_desc == rxq->rx_ring_size) rxq->rx_curr_desc = 0; - dma_unmap_single(NULL, rx_desc->buf_ptr, + dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr, rx_desc->buf_size, DMA_FROM_DEVICE); rxq->rx_desc_count--; rx++; @@ -678,8 +678,9 @@ static int rxq_refill(struct rx_queue *rxq, int budget) rx_desc = rxq->rx_desc_area + rx; - rx_desc->buf_ptr = dma_map_single(NULL, skb->data, - mp->skb_size, DMA_FROM_DEVICE); + rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent, + skb->data, mp->skb_size, + DMA_FROM_DEVICE); rx_desc->buf_size = mp->skb_size; rxq->rx_skb[rx] = skb; wmb(); @@ -718,6 +719,7 @@ static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb) static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb) { + struct mv643xx_eth_private *mp = txq_to_mp(txq); int nr_frags = skb_shinfo(skb)->nr_frags; int frag; @@ -746,10 +748,10 @@ static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb) desc->l4i_chk = 0; desc->byte_cnt = this_frag->size; - desc->buf_ptr = dma_map_page(NULL, this_frag->page, - this_frag->page_offset, - this_frag->size, - DMA_TO_DEVICE); + desc->buf_ptr = dma_map_page(mp->dev->dev.parent, + this_frag->page, + this_frag->page_offset, + this_frag->size, DMA_TO_DEVICE); } } @@ -826,7 +828,8 @@ no_csum: desc->l4i_chk = l4i_chk; desc->byte_cnt = length; - desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); + desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data, + length, DMA_TO_DEVICE); __skb_queue_tail(&txq->tx_skb, skb); @@ -956,10 +959,10 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) } if (cmd_sts & TX_FIRST_DESC) { - dma_unmap_single(NULL, desc->buf_ptr, + dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr, desc->byte_cnt, DMA_TO_DEVICE); } else { - dma_unmap_page(NULL, desc->buf_ptr, + dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr, desc->byte_cnt, DMA_TO_DEVICE); } @@ -1894,9 +1897,9 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index) mp->rx_desc_sram_size); rxq->rx_desc_dma = mp->rx_desc_sram_addr; } else { - rxq->rx_desc_area = dma_alloc_coherent(NULL, size, - &rxq->rx_desc_dma, - GFP_KERNEL); + rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent, + size, &rxq->rx_desc_dma, + GFP_KERNEL); } if (rxq->rx_desc_area == NULL) { @@ -1947,7 +1950,7 @@ out_free: if (index == 0 && size <= mp->rx_desc_sram_size) iounmap(rxq->rx_desc_area); else - dma_free_coherent(NULL, size, + dma_free_coherent(mp->dev->dev.parent, size, rxq->rx_desc_area, rxq->rx_desc_dma); @@ -1979,7 +1982,7 @@ static void rxq_deinit(struct rx_queue *rxq) rxq->rx_desc_area_size <= mp->rx_desc_sram_size) iounmap(rxq->rx_desc_area); else - dma_free_coherent(NULL, rxq->rx_desc_area_size, + dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size, rxq->rx_desc_area, rxq->rx_desc_dma); kfree(rxq->rx_skb); @@ -2007,9 +2010,9 @@ static int txq_init(struct mv643xx_eth_private *mp, int index) mp->tx_desc_sram_size); txq->tx_desc_dma = mp->tx_desc_sram_addr; } else { - txq->tx_desc_area = dma_alloc_coherent(NULL, size, - &txq->tx_desc_dma, - GFP_KERNEL); + txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent, + size, &txq->tx_desc_dma, + GFP_KERNEL); } if (txq->tx_desc_area == NULL) { @@ -2053,7 +2056,7 @@ static void txq_deinit(struct tx_queue *txq) txq->tx_desc_area_size <= mp->tx_desc_sram_size) iounmap(txq->tx_desc_area); else - dma_free_coherent(NULL, txq->tx_desc_area_size, + dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size, txq->tx_desc_area, txq->tx_desc_dma); } From d77dd8d27e73a9277096453eb901aae0bfd4ca3c Mon Sep 17 00:00:00 2001 From: roel kluin Date: Fri, 15 May 2009 10:19:51 +0000 Subject: [PATCH 341/670] Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR? FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR. Signed-off-by: Roel Kluin Acked-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-traffic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c index 7be0ae10d69b..c2eeac4125f3 100644 --- a/drivers/net/vxge/vxge-traffic.c +++ b/drivers/net/vxge/vxge-traffic.c @@ -115,7 +115,7 @@ enum vxge_hw_status vxge_hw_vpath_intr_enable(struct __vxge_hw_vpath_handle *vp) VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON| VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON| VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR| - VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32), + VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32), &vp_reg->kdfcctl_errors_mask); __vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask); From 705efc3b03cbee449e4d83b230423894152f7982 Mon Sep 17 00:00:00 2001 From: Wang Tinggong Date: Thu, 14 May 2009 22:49:36 +0000 Subject: [PATCH 342/670] Doc: fixed descriptions on /proc/sys/net/core/* and /proc/sys/net/unix/* Signed-off-by: Wang Tinggong Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ec5de02f543f..b121c5db707f 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max sctp_wmem - vector of 3 INTEGERs: min, default, max See tcp_wmem for a description. -UNDOCUMENTED: /proc/sys/net/core/* - dev_weight FIXME +dev_weight - INTEGER + The maximum number of packets that kernel can handle on a NAPI + interrupt, it's a Per-CPU variable. + + Default: 64 /proc/sys/net/unix/* - max_dgram_qlen FIXME +max_dgram_qlen - INTEGER + The maximum length of dgram socket receive queue + + Default: 10 + + +UNDOCUMENTED: /proc/sys/net/irda/* fast_poll_increase FIXME From af3e4aca47d2e05a545a5e10ba5c7193e0b665e0 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 30 Apr 2009 10:59:19 +0000 Subject: [PATCH 343/670] powerpc: Do not assert pte_locked for hugepage PTE entries With CONFIG_DEBUG_VM, an assertion is made when changing the protection flags of a PTE that the PTE is locked. Huge pages use a different pagetable format and the assertion is bogus and will always trigger with a bug looking something like Unable to handle kernel paging request for data at address 0xf1a00235800006f8 Faulting instruction address: 0xc000000000034a80 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=32 NUMA Maple Modules linked in: dm_snapshot dm_mirror dm_region_hash dm_log dm_mod loop evdev ext3 jbd mbcache sg sd_mod ide_pci_generic pata_amd ata_generic ipr libata tg3 libphy scsi_mod windfarm_pid windfarm_smu_sat windfarm_max6690_sensor windfarm_lm75_sensor windfarm_cpufreq_clamp windfarm_core i2c_powermac NIP: c000000000034a80 LR: c000000000034b18 CTR: 0000000000000003 REGS: c000000003037600 TRAP: 0300 Not tainted (2.6.30-rc3-autokern1) MSR: 9000000000009032 CR: 28002484 XER: 200fffff DAR: f1a00235800006f8, DSISR: 0000000040010000 TASK = c0000002e54cc740[2960] 'map_high_trunca' THREAD: c000000003034000 CPU: 2 GPR00: 4000000000000000 c000000003037880 c000000000895d30 c0000002e5a2e500 GPR04: 00000000a0000000 c0000002edc40880 0000005700000393 0000000000000001 GPR08: f000000011ac0000 01a00235800006e8 00000000000000f5 f1a00235800006e8 GPR12: 0000000028000484 c0000000008dd780 0000000000001000 0000000000000000 GPR16: fffffffffffff000 0000000000000000 00000000a0000000 c000000003037a20 GPR20: c0000002e5f4ece8 0000000000001000 c0000002edc40880 0000000000000000 GPR24: c0000002e5f4ece8 0000000000000000 00000000a0000000 c0000002e5f4ece8 GPR28: 0000005700000393 c0000002e5a2e500 00000000a0000000 c000000003037880 NIP [c000000000034a80] .assert_pte_locked+0xa4/0xd0 LR [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4 Call Trace: [c000000003037880] [c000000003037990] 0xc000000003037990 (unreliable) [c000000003037910] [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4 [c0000000030379b0] [c00000000014bef8] .hugetlb_cow+0x124/0x674 [c000000003037b00] [c00000000014c930] .hugetlb_fault+0x4e8/0x6f8 [c000000003037c00] [c00000000013443c] .handle_mm_fault+0xac/0x828 [c000000003037cf0] [c0000000000340a8] .do_page_fault+0x39c/0x584 [c000000003037e30] [c0000000000057b0] handle_page_fault+0x20/0x5c Instruction dump: 7d29582a 7d200074 7800d182 0b000000 3c004000 3960ffff 780007c6 796b00c4 7d290214 7929a302 1d290068 7d6b4a14 <800b0010> 7c000074 7800d182 0b000000 This patch fixes the problem by not asseting the PTE is locked for VMAs backed by huge pages. Signed-off-by: Mel Gorman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index f5c6fd42265c..ae1d67cc090c 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -219,7 +219,8 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, entry = do_dcache_icache_coherency(entry); changed = !pte_same(*(ptep), entry); if (changed) { - assert_pte_locked(vma->vm_mm, address); + if (!(vma->vm_flags & VM_HUGETLB)) + assert_pte_locked(vma->vm_mm, address); __ptep_set_access_flags(ptep, entry); flush_tlb_page_nohash(vma, address); } From 021376a3b655364c92c10be544a3319946a792e8 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 13 May 2009 20:30:24 +0000 Subject: [PATCH 344/670] powerpc/ftrace: Use pr_devel() in ftrace.c pr_debug() can now result in code being generated even when #DEBUG is not defined. That's not really desirable in the ftrace code which we want to be snappy. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3334 672 4 4010 faa arch/powerpc/kernel/ftrace.o size after: text data bss dec hex filename 2616 360 4 2980 ba4 arch/powerpc/kernel/ftrace.o Signed-off-by: Michael Ellerman Acked-by: Steven Rostedt Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ftrace.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 70e2a736be1f..5b078ee391fc 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -157,7 +157,7 @@ __ftrace_make_nop(struct module *mod, * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12) */ - pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); + pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -165,7 +165,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x", jmp[0], jmp[1]); + pr_devel(" %08x %08x", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d820000) || @@ -181,18 +181,18 @@ __ftrace_make_nop(struct module *mod, offset = ((unsigned)((unsigned short)jmp[0]) << 16) + (int)((short)jmp[1]); - pr_debug(" %x ", offset); + pr_devel(" %x ", offset); /* get the address this jumps too */ tramp = mod->arch.toc + offset + 32; - pr_debug("toc: %lx", tramp); + pr_devel("toc: %lx", tramp); if (probe_kernel_read(jmp, (void *)tramp, 8)) { printk(KERN_ERR "Failed to read %lx\n", tramp); return -EFAULT; } - pr_debug(" %08x %08x\n", jmp[0], jmp[1]); + pr_devel(" %08x %08x\n", jmp[0], jmp[1]); ptr = ((unsigned long)jmp[0] << 32) + jmp[1]; @@ -269,7 +269,7 @@ __ftrace_make_nop(struct module *mod, * 0x4e, 0x80, 0x04, 0x20 bctr */ - pr_debug("ip:%lx jumps to %lx", ip, tramp); + pr_devel("ip:%lx jumps to %lx", ip, tramp); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -277,7 +277,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x ", jmp[0], jmp[1]); + pr_devel(" %08x %08x ", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d600000) || @@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod, if (tramp & 0x8000) tramp -= 0x10000; - pr_debug(" %lx ", tramp); + pr_devel(" %lx ", tramp); if (tramp != addr) { printk(KERN_ERR @@ -402,7 +402,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) /* ld r2,40(r1) */ op[1] = 0xe8410028; - pr_debug("write to %lx\n", rec->ip); + pr_devel("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2)) return -EPERM; @@ -442,7 +442,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return -EINVAL; } - pr_debug("write to %lx\n", rec->ip); + pr_devel("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) return -EPERM; From c3cf8667ed7db58c1960958cbb0a9098d513cc60 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 15 May 2009 04:33:54 +0000 Subject: [PATCH 345/670] powerpc/ftrace: Fix constraint to be early clobber After upgrading my distcc boxes from gcc 4.2.2 to 4.4.0, the function graph tracer broke. This was discovered on my x86 boxes. The issue is that gcc used the same register for an output as it did for an input in an asm statement. I first thought this was a bug in gcc and reported it. I was notified that gcc was correct and that the output had to be flagged as an "early clobber". I noticed that powerpc had the same issue and this patch fixes it. Signed-off-by: Steven Rostedt Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 5b078ee391fc..2d182f119d1d 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -594,7 +594,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) PPC_LONG "2b,4b\n" ".previous" - : [old] "=r" (old), [faulted] "=r" (faulted) + : [old] "=&r" (old), [faulted] "=r" (faulted) : [parent] "r" (parent), [return_hooker] "r" (return_hooker) : "memory" ); From dc892288f42661a140124ecbf9d44850a95de222 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 15 May 2009 08:01:59 +0000 Subject: [PATCH 346/670] powerpc/ps3: Update ps3_defconfig Refresh and set these options: CONFIG_SYSFS_DEPRECATED_V2: y -> n CONFIG_INPUT_JOYSTICK: y -> n CONFIG_HID_SONY: n -> m CONFIG_RTC_DRV_PS3: - -> m Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ps3_defconfig | 105 +++++++++++++++++------------ 1 file changed, 62 insertions(+), 43 deletions(-) diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index ac14f5245d2a..e28e65e7a0e1 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc8 -# Fri Mar 13 09:28:45 2009 +# Linux kernel version: 2.6.30-rc5 +# Fri May 15 10:37:00 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y CONFIG_POWER4=y @@ -55,9 +56,11 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +75,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -88,8 +92,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -99,6 +102,9 @@ CONFIG_NAMESPACES=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -107,6 +113,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -138,6 +145,7 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,7 +158,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -172,7 +179,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_PMAC is not set @@ -209,6 +215,7 @@ CONFIG_SPU_FS_64K_LS=y # CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y # CONFIG_PQ2ADS is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -279,11 +286,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -316,7 +326,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -389,6 +398,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -396,6 +406,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -419,11 +430,9 @@ CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y # CONFIG_WIRELESS_EXT_SYSFS is not set @@ -602,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set @@ -616,6 +626,7 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_UEVENT is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -625,6 +636,8 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -646,12 +659,13 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set -# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_AR9170_USB is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set @@ -673,6 +687,7 @@ CONFIG_USB_PEGASUS=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m # CONFIG_USB_NET_CDCETHER is not set +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -724,28 +739,7 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_JOYSTICK=y -# CONFIG_JOYSTICK_ANALOG is not set -# CONFIG_JOYSTICK_A3D is not set -# CONFIG_JOYSTICK_ADI is not set -# CONFIG_JOYSTICK_COBRA is not set -# CONFIG_JOYSTICK_GF2K is not set -# CONFIG_JOYSTICK_GRIP is not set -# CONFIG_JOYSTICK_GRIP_MP is not set -# CONFIG_JOYSTICK_GUILLEMOT is not set -# CONFIG_JOYSTICK_INTERACT is not set -# CONFIG_JOYSTICK_SIDEWINDER is not set -# CONFIG_JOYSTICK_TMDC is not set -# CONFIG_JOYSTICK_IFORCE is not set -# CONFIG_JOYSTICK_WARRIOR is not set -# CONFIG_JOYSTICK_MAGELLAN is not set -# CONFIG_JOYSTICK_SPACEORB is not set -# CONFIG_JOYSTICK_SPACEBALL is not set -# CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDJOY is not set -# CONFIG_JOYSTICK_ZHENHUA is not set -# CONFIG_JOYSTICK_JOYDUMP is not set -# CONFIG_JOYSTICK_XPAD is not set +# CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -864,6 +858,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=9 # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -934,15 +929,17 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -# CONFIG_HID_COMPAT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set # CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set @@ -950,7 +947,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set +CONFIG_HID_SONY=m # CONFIG_HID_SUNPLUS is not set # CONFIG_GREENASIA_FF is not set # CONFIG_HID_TOPSEED is not set @@ -1012,11 +1009,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1058,7 +1055,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1074,6 +1070,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1113,8 +1110,10 @@ CONFIG_RTC_INTF_DEV=y # # on-CPU RTC drivers # -CONFIG_RTC_DRV_PPC=m +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_RTC_DRV_PS3=m # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1125,6 +1124,7 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1160,6 +1160,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1211,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1223,7 +1229,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1283,6 +1288,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1296,15 +1302,16 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1322,6 +1329,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1357,12 +1367,15 @@ CONFIG_DEBUG_LIST=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1371,18 +1384,21 @@ CONFIG_TRACING=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1415,10 +1431,12 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1487,6 +1505,7 @@ CONFIG_CRYPTO_SALSA20=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # From 0e337b42d620ca7c45fe64e64dd71957c56216c9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 17 May 2009 18:29:03 +0000 Subject: [PATCH 347/670] powerpc: Explicit alignment for .data.cacheline_aligned I don't think anything guarantees that the objects in data.page_aligned are a multiple of PAGE_SIZE, thus the section may end on any boundary. So the following section, .data.cacheline_aligned needs an explicit alignment. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index a047a6cfca4d..8ef8a14abc95 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -264,6 +264,7 @@ SECTIONS *(.data.page_aligned) } + . = ALIGN(L1_CACHE_BYTES); .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { *(.data.cacheline_aligned) } From 5b4662f098b47f68d7fcea9b065d1513547fef12 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 15 May 2009 14:50:33 -0400 Subject: [PATCH 348/670] regulator: da903x: add missing __devexit_p() The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger CC: Liam Girdwood CC: Mike Rapoport CC: Eric Miao Acked-by: Eric Miao Signed-off-by: Liam Girdwood --- drivers/regulator/da903x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 72b15495183c..c6628f5a0af7 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -497,7 +497,7 @@ static struct platform_driver da903x_regulator_driver = { .owner = THIS_MODULE, }, .probe = da903x_regulator_probe, - .remove = da903x_regulator_remove, + .remove = __devexit_p(da903x_regulator_remove), }; static int __init da903x_regulator_init(void) From eb33575cf67d3f35fa2510210ef92631266e2465 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 13 May 2009 17:34:48 +0100 Subject: [PATCH 349/670] [ARM] Double check memmap is actually valid with a memmap has unexpected holes V2 pfn_valid() is meant to be able to tell if a given PFN has valid memmap associated with it or not. In FLATMEM, it is expected that holes always have valid memmap as long as there is valid PFNs either side of the hole. In SPARSEMEM, it is assumed that a valid section has a memmap for the entire section. However, ARM and maybe other embedded architectures in the future free memmap backing holes to save memory on the assumption the memmap is never used. The page_zone linkages are then broken even though pfn_valid() returns true. A walker of the full memmap must then do this additional check to ensure the memmap they are looking at is sane by making sure the zone and PFN linkages are still valid. This is expensive, but walkers of the full memmap are extremely rare. This was caught before for FLATMEM and hacked around but it hits again for SPARSEMEM because the page_zone linkages can look ok where the PFN linkages are totally screwed. This looks like a hatchet job but the reality is that any clean solution would end up consumning all the memory saved by punching these unexpected holes in the memmap. For example, we tried marking the memmap within the section invalid but the section size exceeds the size of the hole in most cases so pfn_valid() starts returning false where valid memmap exists. Shrinking the size of the section would increase memory consumption offsetting the gains. This patch identifies when an architecture is punching unexpected holes in the memmap that the memory model cannot automatically detect and sets ARCH_HAS_HOLES_MEMORYMODEL. At the moment, this is restricted to EP93xx which is the model sub-architecture this has been reported on but may expand later. When set, walkers of the full memmap must call memmap_valid_within() for each PFN and passing in what it expects the page and zone to be for that PFN. If it finds the linkages to be broken, it assumes the memmap is invalid for that PFN. Signed-off-by: Mel Gorman Signed-off-by: Russell King --- arch/arm/Kconfig | 6 +++--- include/linux/mmzone.h | 26 ++++++++++++++++++++++++++ mm/mmzone.c | 15 +++++++++++++++ mm/vmstat.c | 19 ++++--------------- 4 files changed, 48 insertions(+), 18 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e60ec54df334..9d02cdb15b23 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -273,6 +273,7 @@ config ARCH_EP93XX select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_HOLES_MEMORYMODEL help This enables support for the Cirrus EP93xx series of CPUs. @@ -976,10 +977,9 @@ config OABI_COMPAT UNPREDICTABLE (in fact it can be predicted that it won't work at all). If in doubt say Y. -config ARCH_FLATMEM_HAS_HOLES +config ARCH_HAS_HOLES_MEMORYMODEL bool - default y - depends on FLATMEM + default n # Discontigmem is deprecated config ARCH_DISCONTIGMEM_ENABLE diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 186ec6ab334d..a47c879e1304 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -1097,6 +1097,32 @@ unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long); #define pfn_valid_within(pfn) (1) #endif +#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL +/* + * pfn_valid() is meant to be able to tell if a given PFN has valid memmap + * associated with it or not. In FLATMEM, it is expected that holes always + * have valid memmap as long as there is valid PFNs either side of the hole. + * In SPARSEMEM, it is assumed that a valid section has a memmap for the + * entire section. + * + * However, an ARM, and maybe other embedded architectures in the future + * free memmap backing holes to save memory on the assumption the memmap is + * never used. The page_zone linkages are then broken even though pfn_valid() + * returns true. A walker of the full memmap must then do this additional + * check to ensure the memmap they are looking at is sane by making sure + * the zone and PFN linkages are still valid. This is expensive, but walkers + * of the full memmap are extremely rare. + */ +int memmap_valid_within(unsigned long pfn, + struct page *page, struct zone *zone); +#else +static inline int memmap_valid_within(unsigned long pfn, + struct page *page, struct zone *zone) +{ + return 1; +} +#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */ + #endif /* !__GENERATING_BOUNDS.H */ #endif /* !__ASSEMBLY__ */ #endif /* _LINUX_MMZONE_H */ diff --git a/mm/mmzone.c b/mm/mmzone.c index 16ce8b955dcf..f5b7d1760213 100644 --- a/mm/mmzone.c +++ b/mm/mmzone.c @@ -6,6 +6,7 @@ #include +#include #include #include @@ -72,3 +73,17 @@ struct zoneref *next_zones_zonelist(struct zoneref *z, *zone = zonelist_zone(z); return z; } + +#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL +int memmap_valid_within(unsigned long pfn, + struct page *page, struct zone *zone) +{ + if (page_to_pfn(page) != pfn) + return 0; + + if (page_zone(page) != zone) + return 0; + + return 1; +} +#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */ diff --git a/mm/vmstat.c b/mm/vmstat.c index 66f6130976cb..74d66dba0cbe 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -509,22 +509,11 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m, continue; page = pfn_to_page(pfn); -#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES - /* - * Ordinarily, memory holes in flatmem still have a valid - * memmap for the PFN range. However, an architecture for - * embedded systems (e.g. ARM) can free up the memmap backing - * holes to save memory on the assumption the memmap is - * never used. The page_zone linkages are then broken even - * though pfn_valid() returns true. Skip the page if the - * linkages are broken. Even if this test passed, the impact - * is that the counters for the movable type are off but - * fragmentation monitoring is likely meaningless on small - * systems. - */ - if (page_zone(page) != zone) + + /* Watch for unexpected holes punched in the memmap */ + if (!memmap_valid_within(pfn, page, zone)) continue; -#endif + mtype = get_pageblock_migratetype(page); if (mtype < MIGRATE_TYPES) From 8190b37f6483fedc530110d8c7d710d1c0317ba4 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Tue, 12 May 2009 13:36:46 -0700 Subject: [PATCH 350/670] [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF Signed-off-by: Pavel Roskin Signed-off-by: Andrew Morton Signed-off-by: Russell King --- arch/arm/mach-l7200/include/mach/sys-clock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h index 2d7722be60ea..e9729a35751d 100644 --- a/arch/arm/mach-l7200/include/mach/sys-clock.h +++ b/arch/arm/mach-l7200/include/mach/sys-clock.h @@ -18,7 +18,7 @@ /* IO_START and IO_BASE are defined in hardware.h */ -#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */ +#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */ #define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */ /* Define the interface to the SYS_CLOCK */ From 3026589c1bc17b0c389b95afec127e92e2a745e2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 11 May 2009 09:24:47 +0200 Subject: [PATCH 351/670] microblaze: Update Microblaze defconfig Signed-off-by: Michal Simek --- arch/microblaze/configs/nommu_defconfig | 50 ++++++++++++++++--------- 1 file changed, 32 insertions(+), 18 deletions(-) diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index beb7ecd72793..4ef6af0a8f31 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Tue Mar 24 10:23:20 2009 +# Linux kernel version: 2.6.30-rc5 +# Mon May 11 09:01:02 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -80,6 +82,8 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # # Exectuable file formats @@ -180,7 +185,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -562,6 +569,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -601,8 +613,13 @@ CONFIG_CRAMFS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y CONFIG_HEART_BEAT=y @@ -777,6 +789,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -784,6 +797,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y From 7b7210d7a9d260becef4dba98b9075e2c9b41f93 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 14 May 2009 13:35:52 +0200 Subject: [PATCH 352/670] microblaze: Fix kind-of-intr checking against number of interrupts + Fix typographic fault. Signed-off-by: Michal Simek --- arch/microblaze/kernel/intc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index a69d3e3c2fd4..b15605299a57 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -137,8 +137,8 @@ void __init init_IRQ(void) intr_type = *(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL); - if (intr_type >= (1 << nr_irq)) - printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n"); + if (intr_type >= (1 << (nr_irq + 1))) + printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n"); #ifdef CONFIG_SELFMOD_INTC selfmod_function((int *) arr_func, intc_baseaddr); From 818bc814447a35350ae90a329133e474bf1a2bd7 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Sat, 2 May 2009 15:05:59 -0300 Subject: [PATCH 353/670] [ARM] pxa: save/restore PGSR on suspend/resume. Signed-off-by: Daniel Ribeiro Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mfp-pxa2xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 7ffb91d64c39..6ae50604170d 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) { @@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state) saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_pgsr[i] = PGSR(i); GPDR(i * 32) = gpdr_lpm[i]; } @@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d) GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; GPDR(i * 32) = saved_gpdr[i]; + PGSR(i) = saved_pgsr[i]; } PSSR = PSSR_RDH | PSSR_PH; return 0; From 216e3b7abbd05c35d2d1a3f86629ade485351f0d Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Tue, 5 May 2009 22:43:18 -0300 Subject: [PATCH 354/670] [ARM] pxa: allow gpio_reset drive high during normal work I want to reuse tosa/spitz gpio_reset code, but my board needs the reset gpio to be driven high during normal operation. Signed-off-by: Daniel Ribeiro Acked-by: Dmitry Eremin-Solenikov Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/reset.h | 5 +++-- arch/arm/mach-pxa/reset.c | 4 ++-- arch/arm/mach-pxa/spitz.c | 2 +- arch/arm/mach-pxa/tosa.c | 2 +- 4 files changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h index 31e6a7b6ad80..b6c10556fbc7 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/include/mach/reset.h @@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask); /** * init_gpio_reset() - register GPIO as reset generator * @gpio: gpio nr - * @output: set gpio as out/low instead of input during normal work + * @output: set gpio as output instead of input during normal work + * @level: output level */ -extern int init_gpio_reset(int gpio, int output); +extern int init_gpio_reset(int gpio, int output, int level); #endif /* __ASM_ARCH_RESET_H */ diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index df29d45fb4e7..01e9d643394a 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -20,7 +20,7 @@ static void do_hw_reset(void); static int reset_gpio = -1; -int init_gpio_reset(int gpio, int output) +int init_gpio_reset(int gpio, int output, int level) { int rc; @@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output) } if (output) - rc = gpio_direction_output(gpio, 0); + rc = gpio_direction_output(gpio, level); else rc = gpio_direction_input(gpio); if (rc) { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index c18e34acafcb..cdacea09abfa 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -731,7 +731,7 @@ static void spitz_restart(char mode, const char *cmd) static void __init common_init(void) { - init_gpio_reset(SPITZ_GPIO_ON_RESET, 1); + init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index afac5b6d3d78..a0bd46ef5d30 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -897,7 +897,7 @@ static void __init tosa_init(void) gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ - init_gpio_reset(TOSA_GPIO_ON_RESET, 0); + init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0); pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; From 866bd435819df8d97767c407f8828a7a2ff971e6 Mon Sep 17 00:00:00 2001 From: Timothy Clacy Date: Thu, 7 May 2009 19:40:33 +0200 Subject: [PATCH 355/670] [ARM] pxa: enable GPIO receivers after configuring pins 'mach-pxa' platforms currently rely on a bootloader to setup GPIO pins and clear RDH (to enable inputs). A kernel loaded by a 'minimal' bootloader, that doesn't touch any pins, will not function correctly; inputs will remain disabled, even after the pins are configured. The following change fixes the issue and has been verified on Gumstix Verdex XL6P and a custom PXA270 platform. Signed-off-by: Timothy Clacy Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mfp-pxa2xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 6ae50604170d..cf6b720c055f 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -377,6 +377,9 @@ static int __init pxa2xx_mfp_init(void) if (cpu_is_pxa27x()) pxa27x_mfp_init(); + /* clear RDH bit to enable GPIO receivers after reset/sleep exit */ + PSSR = PSSR_RDH; + /* initialize gafr_run[], pgsr_lpm[] from existing values */ for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) gpdr_lpm[i] = GPDR(i * 32); From a81b38688f50f51123490d45d51f4a10e8dc1184 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Fri, 15 May 2009 10:11:22 +0400 Subject: [PATCH 356/670] [ARM] pxa/spitz: provide spitz_ohci_exit() that unregisters USB_HOST GPIO Currently spitz_ohci_init() that requests GPIO doesn't have corresponding spitz_ohci_exit() which will gpio_free(). This causes minor problems e.g. during resume when the OHCI device can't be resumed. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cdacea09abfa..5a45fe340a10 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev) return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1); } +static void spitz_ohci_exit(struct device *dev) +{ + gpio_free(SPITZ_GPIO_USB_HOST); +} + static struct pxaohci_platform_data spitz_ohci_platform_data = { .port_mode = PMM_NPS_MODE, .init = spitz_ohci_init, + .exit = spitz_ohci_exit, .flags = ENABLE_PORT_ALL | NO_OC_PROTECTION, .power_budget = 150, }; From bac9caf016bf147af7d3afbe7580a7f773cb1566 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 17 May 2009 18:18:58 -0700 Subject: [PATCH 357/670] asm-generic: fix local_add_unless macro `local_add_unless(x, y, z)' will be expanded to `(&(x)->y, (y), (x))', but `&(x)->y' should be `&(x)->a' Signed-off-by: Roel Kluin Cc: Mathieu Desnoyers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/local.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h index dbd6150763e9..fc218444e315 100644 --- a/include/asm-generic/local.h +++ b/include/asm-generic/local.h @@ -42,7 +42,7 @@ typedef struct #define local_cmpxchg(l, o, n) atomic_long_cmpxchg((&(l)->a), (o), (n)) #define local_xchg(l, n) atomic_long_xchg((&(l)->a), (n)) -#define local_add_unless(l, a, u) atomic_long_add_unless((&(l)->a), (a), (u)) +#define local_add_unless(l, _a, u) atomic_long_add_unless((&(l)->a), (_a), (u)) #define local_inc_not_zero(l) atomic_long_inc_not_zero(&(l)->a) /* Non-atomic variants, ie. preemption disabled and won't be touched From dbf8c11f821b6ff83302c34f2403b4f7231f50ae Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 18 May 2009 11:13:54 +0100 Subject: [PATCH 358/670] mtd_dataflash: unbreak erase support Commit 5b7f3a50 (fix dataflash 64-bit divisions) unfortunately introduced a typo. Erase addr and len were swapped in the pageaddr calculation, causing the wrong sectors to get erased. Signed-off-by: Peter Korsgaard Acked-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/devices/mtd_dataflash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 62dee54af0a5..43976aa4dbb1 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -178,7 +178,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) /* Calculate flash page address; use block erase (for speed) if * we're at a block boundary and need to erase the whole block. */ - pageaddr = div_u64(instr->len, priv->page_size); + pageaddr = div_u64(instr->addr, priv->page_size); do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize; pageaddr = pageaddr << priv->page_offset; From 80193195f87ebca6d7417516d6edeb3969631c15 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 18 May 2009 13:07:35 +0100 Subject: [PATCH 359/670] Fix oops on close of hot-unplugged FTDI serial converter Commit c45d6320 ("fix reference counting of ftdi_private") stopped ftdi_sio_port_remove() from directly freeing the port-private data, with the intention if the port was still open, it would be freed when ftdi_close() is eventually called and releases the last refcount on the structure. That's all very well, but ftdi_sio_port_remove() still contains a call to usb_set_serial_port_data(port, NULL) -- so by the time we get to ftdi_close() for the port which was unplugged, it _still_ oopses on dereferencing that NULL pointer, as it did before (and does in 2.6.29). The fix is just not to clear the private data in ftdi_sio_port_remove(). Then the refcount is properly reduced to zero when the final kref_put() happens in ftdi_close(). Remove a bogus comment too, while we're at it. And stop doing things inside "if (priv)" -- it must _always_ be there. Based loosely on an earlier patch by Daniel Mack, and suggestions by Alan Stern. Signed-off-by: David Woodhouse Tested-by: Daniel Mack Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/usb/serial/ftdi_sio.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0ab8474b00cb..d9fcdaedf389 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1487,14 +1487,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) remove_sysfs_attrs(port); - /* all open ports are closed at this point - * (by usbserial.c:__serial_close, which calls ftdi_close) - */ - - if (priv) { - usb_set_serial_port_data(port, NULL); - kref_put(&priv->kref, ftdi_sio_priv_release); - } + kref_put(&priv->kref, ftdi_sio_priv_release); return 0; } From 982db66352d31892f624390cfb64a1cea5df765a Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 18 May 2009 17:29:30 +0100 Subject: [PATCH 360/670] [ARM] 5518/1: versatile: don't put clock lookups in __initdata Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 1f929c391af7..b3bebcc5623b 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -413,7 +413,7 @@ static struct clk ref24_clk = { .rate = 24000000, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "dev:f1", .clk = &ref24_clk, From a93ea9b357a4d4fce9a1f65bf9c152fb67c30716 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 18 May 2009 17:26:08 +0100 Subject: [PATCH 361/670] [ARM] 5517/1: integrator: don't put clock lookups in __initdata Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/mach-integrator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 6f8872913073..a0f60e55da6a 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -121,7 +121,7 @@ static struct clk uartclk = { .rate = 14745600, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, From 2b69a8a2b6e5f5d26a038a6494a88a1a776ac88f Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Mon, 18 May 2009 12:57:24 -0600 Subject: [PATCH 362/670] [SCSI] mpt2sas: fix driver version inconsistency In Commit commit 3b8b5c9b1f08660583e5dfe095c24170df62f1d2 Author: Eric Moore Date: Tue Apr 21 15:44:27 2009 -0600 [SCSI] mpt2sas : bump driver version to 01.100.02.00 The MPT2SAS_MAJOR_VERSION didn't get bumped from 00 to 01 so applications will see it incorrectly as 00.100.02.00 driver instead of 01.100.02.00. Fix by making MPT2SAS_MAJOR_VERSION match the major number in MPT2SAS_DRIVER_VERSION Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index babd4cc0cb25..36b1d1052ba1 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,7 +69,7 @@ #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" #define MPT2SAS_DRIVER_VERSION "01.100.02.00" -#define MPT2SAS_MAJOR_VERSION 00 +#define MPT2SAS_MAJOR_VERSION 01 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 02 #define MPT2SAS_RELEASE_VERSION 00 From 775273131810caa41dfc7f9e552ea5d8508caf40 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Sun, 10 May 2009 20:32:34 +0000 Subject: [PATCH 363/670] tcp: fix MSG_PEEK race check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 518a09ef11 (tcp: Fix recvmsg MSG_PEEK influence of blocking behavior) lets the loop run longer than the race check did previously expect, so we need to be more careful with this check and consider the work we have been doing. I tried my best to deal with urg hole madness too which happens here: if (!sock_flag(sk, SOCK_URGINLINE)) { ++*seq; ... by using additional offset by one but I certainly have very little interest in testing that part. Signed-off-by: Ilpo Järvinen Tested-by: Frans Pop Tested-by: Ian Zimmermann Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 1d7f49c6f0ca..7a0f0b27bf1f 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1321,6 +1321,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, struct task_struct *user_recv = NULL; int copied_early = 0; struct sk_buff *skb; + u32 urg_hole = 0; lock_sock(sk); @@ -1532,7 +1533,8 @@ do_prequeue: } } } - if ((flags & MSG_PEEK) && peek_seq != tp->copied_seq) { + if ((flags & MSG_PEEK) && + (peek_seq - copied - urg_hole != tp->copied_seq)) { if (net_ratelimit()) printk(KERN_DEBUG "TCP(%s:%d): Application bug, race in MSG_PEEK.\n", current->comm, task_pid_nr(current)); @@ -1553,6 +1555,7 @@ do_prequeue: if (!urg_offset) { if (!sock_flag(sk, SOCK_URGINLINE)) { ++*seq; + urg_hole++; offset++; used--; if (!used) From c0f84d0d4be3f7d818b4ffb04d27f9bae64397f0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 May 2009 15:12:31 -0700 Subject: [PATCH 364/670] sch_teql: should not dereference skb after ndo_start_xmit() It is illegal to dereference a skb after a successful ndo_start_xmit() call. We must store skb length in a local variable instead. Bug was introduced in 2.6.27 by commit 0abf77e55a2459aa9905be4b226e4729d5b4f0cb (net_sched: Add accessor function for packet length for qdiscs) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_teql.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index ec697cebb63b..3b6418297231 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -303,6 +303,8 @@ restart: switch (teql_resolve(skb, skb_res, slave)) { case 0: if (__netif_tx_trylock(slave_txq)) { + unsigned int length = qdisc_pkt_len(skb); + if (!netif_tx_queue_stopped(slave_txq) && !netif_tx_queue_frozen(slave_txq) && slave_ops->ndo_start_xmit(skb, slave) == 0) { @@ -310,8 +312,7 @@ restart: master->slaves = NEXT_SLAVE(q); netif_wake_queue(dev); master->stats.tx_packets++; - master->stats.tx_bytes += - qdisc_pkt_len(skb); + master->stats.tx_bytes += length; return 0; } __netif_tx_unlock(slave_txq); From c4ca2374312b4de819dd700e72a68395eddb5fcb Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Mon, 18 May 2009 15:38:55 -0700 Subject: [PATCH 365/670] be2net: add two new pci device ids to pci device table Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 14 ++++++++++++++ drivers/net/benet/be_main.c | 10 +++++----- 2 files changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index c49ddd08b2aa..b4bb06fdf307 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -35,8 +35,22 @@ #define DRV_VER "2.0.348" #define DRV_NAME "be2net" #define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC" +#define OC_NAME "Emulex OneConnect 10Gbps NIC" #define DRV_DESC BE_NAME "Driver" +#define BE_VENDOR_ID 0x19a2 +#define BE_DEVICE_ID1 0x211 +#define OC_DEVICE_ID1 0x700 +#define OC_DEVICE_ID2 0x701 + +static inline char *nic_name(struct pci_dev *pdev) +{ + if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2) + return OC_NAME; + else + return BE_NAME; +} + /* Number of bytes of an RX frame that are copied to skb->data */ #define BE_HDR_LEN 64 #define BE_MAX_JUMBO_FRAME_SIZE 9018 diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 30d0c81c989e..5c378b5e8e41 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -28,10 +28,10 @@ static unsigned int rx_frag_size = 2048; module_param(rx_frag_size, uint, S_IRUGO); MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data."); -#define BE_VENDOR_ID 0x19a2 -#define BE2_DEVICE_ID_1 0x0211 static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = { - { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) }, + { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) }, + { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) }, + { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) }, { 0 } }; MODULE_DEVICE_TABLE(pci, be_dev_ids); @@ -1859,7 +1859,7 @@ static int __devinit be_probe(struct pci_dev *pdev, if (status != 0) goto stats_clean; - dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num); + dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num); return 0; stats_clean: @@ -1873,7 +1873,7 @@ rel_reg: disable_dev: pci_disable_device(pdev); do_none: - dev_warn(&pdev->dev, BE_NAME " initialization failed\n"); + dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev)); return status; } From 511e11e396dc596825ce04d53d7f6d579404bc01 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 May 2009 19:26:37 -0700 Subject: [PATCH 366/670] pkt_sched: gen_estimator: use 64 bit intermediate counters for bps gen_estimator can overflow bps (bytes per second) with Gb links, while it was designed with a u32 API, with a theorical limit of 34360Mbit (2^32 bytes) Using 64 bit intermediate avbps/brate counters can allow us to reach this theorical limit. Signed-off-by: Eric Dumazet Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- net/core/gen_estimator.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c index 9cc9f95b109e..6d62d4618cfc 100644 --- a/net/core/gen_estimator.c +++ b/net/core/gen_estimator.c @@ -66,9 +66,9 @@ NOTES. - * The stored value for avbps is scaled by 2^5, so that maximal - rate is ~1Gbit, avpps is scaled by 2^10. - + * avbps is scaled by 2^5, avpps is scaled by 2^10. + * both values are reported as 32 bit unsigned values. bps can + overflow for fast links : max speed being 34360Mbit/sec * Minimal interval is HZ/4=250msec (it is the greatest common divisor for HZ=100 and HZ=1024 8)), maximal interval is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals @@ -86,9 +86,9 @@ struct gen_estimator spinlock_t *stats_lock; int ewma_log; u64 last_bytes; + u64 avbps; u32 last_packets; u32 avpps; - u32 avbps; struct rcu_head e_rcu; struct rb_node node; }; @@ -115,6 +115,7 @@ static void est_timer(unsigned long arg) rcu_read_lock(); list_for_each_entry_rcu(e, &elist[idx].list, list) { u64 nbytes; + u64 brate; u32 npackets; u32 rate; @@ -125,9 +126,9 @@ static void est_timer(unsigned long arg) nbytes = e->bstats->bytes; npackets = e->bstats->packets; - rate = (nbytes - e->last_bytes)<<(7 - idx); + brate = (nbytes - e->last_bytes)<<(7 - idx); e->last_bytes = nbytes; - e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log; + e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log; e->rate_est->bps = (e->avbps+0xF)>>5; rate = (npackets - e->last_packets)<<(12 - idx); From 7ee2cb7f32b299c2b06a31fde155457203e4b7dd Mon Sep 17 00:00:00 2001 From: Frank Filz Date: Mon, 18 May 2009 17:41:40 -0400 Subject: [PATCH 367/670] nfs: Fix NFS v4 client handling of MAY_EXEC in nfs_permission. The problem is that permission checking is skipped if atomic open is possible, but when exec opens a file, it just opens it O_READONLY which means EXEC permission will not be checked at that time. This problem is observed by the following sequence (executed as root): mount -t nfs4 server:/ /mnt4 echo "ls" >/mnt4/foo chmod 744 /mnt4/foo su guest -c "mnt4/foo" Signed-off-by: Frank Filz Signed-off-by: Trond Myklebust Cc: stable@kernel.org Tested-by: Eugene Teo Signed-off-by: Linus Torvalds --- fs/nfs/dir.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 370b190a09d1..89f98e9a024b 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1943,7 +1943,8 @@ int nfs_permission(struct inode *inode, int mask) case S_IFREG: /* NFSv4 has atomic_open... */ if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN) - && (mask & MAY_OPEN)) + && (mask & MAY_OPEN) + && !(mask & MAY_EXEC)) goto out; break; case S_IFDIR: From 995b337952cdf7e05d288eede580257b632a8343 Mon Sep 17 00:00:00 2001 From: Thomas Chenault Date: Mon, 18 May 2009 21:43:27 -0700 Subject: [PATCH 368/670] net: fix skb_seq_read returning wrong offset/length for page frag data When called with a consumed value that is less than skb_headlen(skb) bytes into a page frag, skb_seq_read() incorrectly returns an offset/length relative to skb->data. Ensure that data which should come from a page frag does. Signed-off-by: Thomas Chenault Tested-by: Shyam Iyer Signed-off-by: David S. Miller --- net/core/skbuff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index d152394b2611..e505b5392e1e 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2288,7 +2288,7 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data, next_skb: block_limit = skb_headlen(st->cur_skb) + st->stepped_offset; - if (abs_offset < block_limit) { + if (abs_offset < block_limit && !st->frag_data) { *data = st->cur_skb->data + (abs_offset - st->stepped_offset); return block_limit - abs_offset; } From bc8a5397433e4effbaddfa7e462d10b3c060cabb Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 18 May 2009 21:48:38 -0700 Subject: [PATCH 369/670] ipv4: make default for INET_LRO consistent with help text Commit e81963b1 ("ipv4: Make INET_LRO a bool instead of tristate.") changed this config from tristate to bool. Add default so that it is consistent with the help text. Signed-off-by: Frans Pop Signed-off-by: David S. Miller --- net/ipv4/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 9d26a3da37e5..5b919f7b45db 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -408,7 +408,7 @@ config INET_XFRM_MODE_BEET config INET_LRO bool "Large Receive Offload (ipv4/tcp)" - + default y ---help--- Support for Large Receive Offload (ipv4/tcp). From 28afea5b2ffaa48f4f43d22ae8edcc384c05df80 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 19 May 2009 08:25:48 +0200 Subject: [PATCH 370/670] xen/blkfront: allow xenbus state transition to Closing->Closed when not Connected This situation can occur when attempting to attach a block device whose backend is an empty physical CD-ROM driver. The backend in this case will go directly from the Initialising state to Closing->Closed. Previously this would result in a NULL pointer deref on info->gd (xenbus_dev_fatal does not return as a1a15ac5 seems to expect) Cc: stable@kernel.org Signed-off-by: Ian Campbell Acked-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 8f905089b72b..6971a12e8b9b 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -977,8 +977,10 @@ static void backend_changed(struct xenbus_device *dev, break; case XenbusStateClosing: - if (info->gd == NULL) - xenbus_dev_fatal(dev, -ENODEV, "gd is NULL"); + if (info->gd == NULL) { + xenbus_frontend_closed(dev); + break; + } bd = bdget_disk(info->gd, 0); if (bd == NULL) xenbus_dev_fatal(dev, -ENODEV, "bdget failed"); From 31a14400e8f365e5d4d1a0b2a1ef4d5405d6091e Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 19 May 2009 08:27:42 +0200 Subject: [PATCH 371/670] xen/blkfront: fix warning when deleting gendisk on unplug/shutdown Currently blkfront gives a warning when hot unplugging due to calling del_gendisk() with interrupts disabled (due to blkif_io_lock). WARNING: at kernel/softirq.c:124 local_bh_enable+0x36/0x84() Modules linked in: xenfs xen_netfront ext3 jbd mbcache xen_blkfront Pid: 13, comm: xenwatch Not tainted 2.6.29-xs5.5.0.13 #3 Call Trace: [] warn_slowpath+0x80/0xb6 [] xen_sched_clock+0x16/0x63 [] xen_force_evtchn_callback+0xc/0x10 [] check_events+0x8/0xe [] xen_restore_fl_direct_end+0x0/0x1 [] xen_mc_flush+0x10a/0x13f [] __switch_to+0x114/0x14e [] dequeue_task+0x62/0x70 [] finish_task_switch+0x2b/0x84 [] schedule+0x66d/0x6e7 [] xen_force_evtchn_callback+0xc/0x10 [] xen_force_evtchn_callback+0xc/0x10 [] local_bh_enable+0x36/0x84 [] sk_filter+0x57/0x5c [] netlink_broadcast+0x1d5/0x315 [] kobject_uevent_env+0x28d/0x331 [] device_del+0x10f/0x120 [] device_unregister+0x8/0x10 [] bdi_unregister+0x2d/0x39 [] unlink_gendisk+0x23/0x3e [] del_gendisk+0x7b/0xe7 [] blkfront_closing+0x28/0x6e [xen_blkfront] [] backend_changed+0x3ad/0x41d [xen_blkfront] We can fix this by calling del_gendisk() later in blkfront_closing, after releasing blkif_io_lock. Since the queue is stopped during the interrupts disabled phase I don't think there is any danger of an event occuring between releasing the blkif_io_lock and deleting the disk. Signed-off-by: Ian Campbell Cc: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 6971a12e8b9b..a6cbf7b808e6 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -934,8 +934,6 @@ static void blkfront_closing(struct xenbus_device *dev) spin_lock_irqsave(&blkif_io_lock, flags); - del_gendisk(info->gd); - /* No more blkif_request(). */ blk_stop_queue(info->rq); @@ -949,6 +947,8 @@ static void blkfront_closing(struct xenbus_device *dev) blk_cleanup_queue(info->rq); info->rq = NULL; + del_gendisk(info->gd); + out: xenbus_frontend_closed(dev); } From 8b6427a2a8f7dd43e9208fb33a3b116d66db4979 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 19 May 2009 09:57:03 -0400 Subject: [PATCH 372/670] cifs: fix pointer initialization and checks in cifs_follow_symlink (try #4) This is the third respin of the patch posted yesterday to fix the error handling in cifs_follow_symlink. It also includes a fix for a bogus NULL pointer check in CIFSSMBQueryUnixSymLink that Jeff Moyer spotted. It's possible for CIFSSMBQueryUnixSymLink to return without setting target_path to a valid pointer. If that happens then the current value to which we're initializing this pointer could cause an oops when it's kfree'd. This patch is a little more comprehensive than the last patches. It reorganizes cifs_follow_link a bit for (hopefully) better readability. It should also eliminate the uneeded allocation of full_path on servers without unix extensions (assuming they can get to this point anyway, of which I'm not convinced). On a side note, I'm not sure I agree with the logic of enabling this query even when unix extensions are disabled on the client. It seems like that should disable this as well. But, changing that is outside the scope of this fix, so I've left it alone for now. Reported-by: Jeff Moyer Signed-off-by: Jeff Layton Reviewed-by: Jeff Moyer Reviewed-by: Christoph Hellwig Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 2 +- fs/cifs/link.c | 52 +++++++++++++++++++++++------------------------ 2 files changed, 27 insertions(+), 27 deletions(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 5759ba53dc96..d06260251c30 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -2475,7 +2475,7 @@ querySymLinkRetry: /* BB FIXME investigate remapping reserved chars here */ *symlinkinfo = cifs_strndup_from_ucs(data_start, count, is_unicode, nls_codepage); - if (!symlinkinfo) + if (!*symlinkinfo) rc = -ENOMEM; } } diff --git a/fs/cifs/link.c b/fs/cifs/link.c index ea9d11e3dcbb..cd83c53fcbb5 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -107,48 +107,48 @@ void * cifs_follow_link(struct dentry *direntry, struct nameidata *nd) { struct inode *inode = direntry->d_inode; - int rc = -EACCES; + int rc = -ENOMEM; int xid; char *full_path = NULL; - char *target_path = ERR_PTR(-ENOMEM); - struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + char *target_path = NULL; + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *tcon = cifs_sb->tcon; xid = GetXid(); - full_path = build_path_from_dentry(direntry); + /* + * For now, we just handle symlinks with unix extensions enabled. + * Eventually we should handle NTFS reparse points, and MacOS + * symlink support. For instance... + * + * rc = CIFSSMBQueryReparseLinkInfo(...) + * + * For now, just return -EACCES when the server doesn't support posix + * extensions. Note that we still allow querying symlinks when posix + * extensions are manually disabled. We could disable these as well + * but there doesn't seem to be any harm in allowing the client to + * read them. + */ + if (!(tcon->ses->capabilities & CAP_UNIX)) { + rc = -EACCES; + goto out; + } + full_path = build_path_from_dentry(direntry); if (!full_path) goto out; cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode)); - cifs_sb = CIFS_SB(inode->i_sb); - pTcon = cifs_sb->tcon; - - /* We could change this to: - if (pTcon->unix_ext) - but there does not seem any point in refusing to - get symlink info if we can, even if unix extensions - turned off for this mount */ - - if (pTcon->ses->capabilities & CAP_UNIX) - rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path, - &target_path, - cifs_sb->local_nls); - else { - /* BB add read reparse point symlink code here */ - /* rc = CIFSSMBQueryReparseLinkInfo */ - /* BB Add code to Query ReparsePoint info */ - /* BB Add MAC style xsymlink check here if enabled */ - } + rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, &target_path, + cifs_sb->local_nls); + kfree(full_path); +out: if (rc != 0) { kfree(target_path); target_path = ERR_PTR(rc); } - kfree(full_path); -out: FreeXid(xid); nd_set_link(nd, target_path); return NULL; From 8e7d2b2c6ecd3c21a54b877eae3d5be48292e6b5 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 8 May 2009 16:13:25 -0700 Subject: [PATCH 373/670] drm/i915: allocate large pointer arrays with vmalloc For awhile now, many of the GEM code paths have allocated page or object arrays with the slab allocator. This is nice and fast, but won't work well if memory is fragmented, since the slab allocator works with physically contiguous memory (i.e. order > 2 allocations are likely to fail fairly early after booting and doing some work). This patch works around the issue by falling back to vmalloc for >PAGE_SIZE allocations. This is ugly, but much less work than chaining a bunch of pages together by hand (suprisingly there's not a bunch of generic kernel helpers for this yet afaik). vmalloc space is somewhat precious on 32 bit kernels, but our allocations shouldn't be big enough to cause problems, though they're routinely more than a page. Note that this patch doesn't address the unchecked alloc-based-on-ioctl-args in GEM; that needs to be fixed in a separate patch. Also, I've deliberately ignored the DRM's "area" junk. I don't think anyone actually uses it anymore and I'm hoping it gets ripped out soon. [Updated: removed size arg to new free function. We could unify the free functions as well once the DRM mem tracking is ripped out.] fd.o bug #20152 (part 1/3) Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 38 +++++++++++++-------------------- include/drm/drmP.h | 24 +++++++++++++++++++++ 2 files changed, 39 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index b189b49c7602..4a24c90fb940 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -349,7 +349,7 @@ i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -429,7 +429,7 @@ fail_put_user_pages: SetPageDirty(user_pages[i]); page_cache_release(user_pages[i]); } - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -649,7 +649,7 @@ i915_gem_gtt_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -719,7 +719,7 @@ out_unlock: out_unpin_pages: for (i = 0; i < pinned_pages; i++) page_cache_release(user_pages[i]); - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -824,7 +824,7 @@ i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; - user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); + user_pages = drm_calloc_large(num_pages, sizeof(struct page *)); if (user_pages == NULL) return -ENOMEM; @@ -902,7 +902,7 @@ fail_unlock: fail_put_user_pages: for (i = 0; i < pinned_pages; i++) page_cache_release(user_pages[i]); - kfree(user_pages); + drm_free_large(user_pages); return ret; } @@ -1408,9 +1408,7 @@ i915_gem_object_put_pages(struct drm_gem_object *obj) } obj_priv->dirty = 0; - drm_free(obj_priv->pages, - page_count * sizeof(struct page *), - DRM_MEM_DRIVER); + drm_free_large(obj_priv->pages); obj_priv->pages = NULL; } @@ -2024,8 +2022,7 @@ i915_gem_object_get_pages(struct drm_gem_object *obj) */ page_count = obj->size / PAGE_SIZE; BUG_ON(obj_priv->pages != NULL); - obj_priv->pages = drm_calloc(page_count, sizeof(struct page *), - DRM_MEM_DRIVER); + obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *)); if (obj_priv->pages == NULL) { DRM_ERROR("Faled to allocate page list\n"); obj_priv->pages_refcount--; @@ -3111,7 +3108,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, reloc_count += exec_list[i].relocation_count; } - *relocs = drm_calloc(reloc_count, sizeof(**relocs), DRM_MEM_DRIVER); + *relocs = drm_calloc_large(reloc_count, sizeof(**relocs)); if (*relocs == NULL) return -ENOMEM; @@ -3125,8 +3122,7 @@ i915_gem_get_relocs_from_user(struct drm_i915_gem_exec_object *exec_list, exec_list[i].relocation_count * sizeof(**relocs)); if (ret != 0) { - drm_free(*relocs, reloc_count * sizeof(**relocs), - DRM_MEM_DRIVER); + drm_free_large(*relocs); *relocs = NULL; return -EFAULT; } @@ -3165,7 +3161,7 @@ i915_gem_put_relocs_to_user(struct drm_i915_gem_exec_object *exec_list, } err: - drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER); + drm_free_large(relocs); return ret; } @@ -3198,10 +3194,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, return -EINVAL; } /* Copy in the exec list from userland */ - exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count, - DRM_MEM_DRIVER); - object_list = drm_calloc(sizeof(*object_list), args->buffer_count, - DRM_MEM_DRIVER); + exec_list = drm_calloc_large(sizeof(*exec_list), args->buffer_count); + object_list = drm_calloc_large(sizeof(*object_list), args->buffer_count); if (exec_list == NULL || object_list == NULL) { DRM_ERROR("Failed to allocate exec or object list " "for %d buffers\n", @@ -3462,10 +3456,8 @@ err: } pre_mutex_err: - drm_free(object_list, sizeof(*object_list) * args->buffer_count, - DRM_MEM_DRIVER); - drm_free(exec_list, sizeof(*exec_list) * args->buffer_count, - DRM_MEM_DRIVER); + drm_free_large(object_list); + drm_free_large(exec_list); drm_free(cliprects, sizeof(*cliprects) * args->num_cliprects, DRM_MEM_DRIVER); diff --git a/include/drm/drmP.h b/include/drm/drmP.h index c8c422151431..b84d8ae35e6f 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1519,6 +1519,30 @@ static __inline__ void *drm_calloc(size_t nmemb, size_t size, int area) { return kcalloc(nmemb, size, GFP_KERNEL); } + +static __inline__ void *drm_calloc_large(size_t nmemb, size_t size) +{ + u8 *addr; + + if (size <= PAGE_SIZE) + return kcalloc(nmemb, size, GFP_KERNEL); + + addr = vmalloc(nmemb * size); + if (!addr) + return NULL; + + memset(addr, 0, nmemb * size); + + return addr; +} + +static __inline void drm_free_large(void *ptr) +{ + if (!is_vmalloc_addr(ptr)) + return kfree(ptr); + + vfree(ptr); +} #else extern void *drm_alloc(size_t size, int area); extern void drm_free(void *pt, size_t size, int area); From 26a9a418237c0b06528941bca693c49c8d97edbe Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 19 May 2009 11:25:35 -0700 Subject: [PATCH 374/670] Avoid ICE in get_random_int() with gcc-3.4.5 Martin Knoblauch reports that trying to build 2.6.30-rc6-git3 with RHEL4.3 userspace (gcc (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2)) causes an internal compiler error (ICE): drivers/char/random.c: In function `get_random_int': drivers/char/random.c:1672: error: unrecognizable insn: (insn 202 148 150 0 /scratch/build/linux-2.6.30-rc6-git3/arch/x86/include/asm/tsc.h:23 (set (reg:SI 0 ax [91]) (subreg:SI (plus:DI (plus:DI (reg:DI 0 ax [88]) (subreg:DI (reg:SI 6 bp) 0)) (const_int -4 [0xfffffffffffffffc])) 0)) -1 (nil) (nil)) drivers/char/random.c:1672: internal compiler error: in extract_insn, at recog.c:2083 and after some debugging it turns out that it's due to the code trying to figure out the rough value of the current stack pointer by taking an address of an uninitialized variable and casting that to an integer. This is clearly a compiler bug, but it's not worth fighting - while the current stack kernel pointer might be somewhat hard to predict in user space, it's also not generally going to change for a lot of the call chains for a particular process. So just drop it, and mumble some incoherent curses at the compiler. Tested-by: Martin Knoblauch Cc: Matt Mackall Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index b2ced39d76b2..8c7444857a4b 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1673,7 +1673,7 @@ unsigned int get_random_int(void) int ret; keyptr = get_keyptr(); - hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret; + hash[0] += current->pid + jiffies + get_cycles(); ret = half_md4_transform(hash, keyptr->secret); put_cpu_var(get_random_int_hash); From b126d113484886d900179b4ae55ea7fabe15f936 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 30 Apr 2009 14:48:36 +0100 Subject: [PATCH 375/670] mfd: Keep a cache of WM8350 volatile values Due to the way that the WM8350 audio driver handles CODEC_ENA many of the WM8350 audio registers are marked as volatile when they aren't actually so. Allow the audio driver to see a cache of these values for inspection during interrupt context. To do this we need to stop satisfying any bits from volatile registers from cache - there's no real benefit from doing so anyway, we did the read already. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index c2be3088e2e1..fe24079387c5 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -79,10 +79,6 @@ static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs, /* Cache is CPU endian */ dest[i - reg] = be16_to_cpu(dest[i - reg]); - /* Satisfy non-volatile bits from cache */ - dest[i - reg] &= wm8350_reg_io_map[i].vol; - dest[i - reg] |= wm8350->reg_cache[i]; - /* Mask out non-readable bits */ dest[i - reg] &= wm8350_reg_io_map[i].readable; } @@ -182,9 +178,6 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) | src[i - reg]; - /* Don't store volatile bits */ - wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol; - src[i - reg] = cpu_to_be16(src[i - reg]); } @@ -1261,7 +1254,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) { value = be16_to_cpu(wm8350->reg_cache[i]); value &= wm8350_reg_io_map[i].readable; - value &= ~wm8350_reg_io_map[i].vol; wm8350->reg_cache[i] = value; } else wm8350->reg_cache[i] = reg_map[i]; From f43ab901005c2bb3c5440e91b6efae9f5db02e7c Mon Sep 17 00:00:00 2001 From: Nelson Castillo Date: Tue, 12 May 2009 13:26:47 -0700 Subject: [PATCH 376/670] mfd: pcf50633: fix unsafe disable_irq() Without this change Openmoko Freerunner (GTA02) bootstrap will deadlock. As pointed out in other patches this issue is in the wild since the merge of: : commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 : Author: Thomas Gleixner : Date: Mon Mar 23 18:28:15 2009 +0100 : : genirq: add threaded interrupt handler support : : Add support for threaded interrupt handlers Signed-off-by: Nelson Castillo Cc: Ingo Molnar Cc: Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Samuel Ortiz --- drivers/mfd/pcf50633-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 7793932a513b..11a6248cc1c1 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -443,7 +443,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data) dev_dbg(pcf->dev, "pcf50633_irq\n"); get_device(pcf->dev); - disable_irq(pcf->irq); + disable_irq_nosync(pcf->irq); schedule_work(&pcf->irq_work); return IRQ_HANDLED; From 33252572e727ccdcc54efdb67157e7ab3d6942db Mon Sep 17 00:00:00 2001 From: Nico Schottelius Date: Sat, 16 May 2009 14:00:56 +0200 Subject: [PATCH 377/670] Fix scripts/setlocalversion with tagged git commit Produce correct output for - tagged commit (v2.6.30-rc6) - past tagged commit (v2.6.30-rc5-299-g7c7327d) - no tag Signed-off-by: Linus Torvalds --- scripts/setlocalversion | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 32c8554f3946..00790472f641 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -1,5 +1,13 @@ #!/bin/sh -# Print additional version information for non-release trees. +# +# This scripts adds local version information from the version +# control systems git, mercurial (hg) and subversion (svn). +# +# If something goes wrong, send a mail the kernel build mailinglist +# (see MAINTAINERS) and CC Nico Schottelius +# . +# +# usage() { echo "Usage: $0 [srctree]" >&2 @@ -10,12 +18,20 @@ cd "${1:-.}" || usage # Check for git and a git repo. if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then - # Do we have an untagged tag? - if atag=`git describe 2>/dev/null`; then - echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' - # add -g${head}, if there is no usable tag - else - printf '%s%s' -g $head + + # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it, + # because this version is defined in the top level Makefile. + if [ -z "`git describe --exact-match 2>/dev/null`" ]; then + + # If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"), + # we pretty print it. + if atag="`git describe 2>/dev/null`"; then + echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' + + # If we don't have a tag at all we print -g{commitish}. + else + printf '%s%s' -g $head + fi fi # Is this git on svn? From 64d1304a64477629cb16b75491a77bafe6f86963 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 18 May 2009 21:20:10 +0200 Subject: [PATCH 378/670] futex: setup writeable mapping for futex ops which modify user space data The futex code installs a read only mapping via get_user_pages_fast() even if the futex op function has to modify user space data. The eventual fault was fixed up by futex_handle_fault() which walked the VMA with mmap_sem held. After the cleanup patches which removed the mmap_sem dependency of the futex code commit 4dc5b7a36a49eff97050894cf1b3a9a02523717 (futex: clean up fault logic) removed the private VMA walk logic from the futex code. This change results in a stale RO mapping which is not fixed up. Instead of reintroducing the previous fault logic we set up the mapping in get_user_pages_fast() read/write for all operations which modify user space data. Also handle private futexes in the same way and make the current unconditional access_ok(VERIFY_WRITE) depend on the futex op. Reported-by: Andreas Schwab Signed-off-by: Thomas Gleixner CC: stable@kernel.org --- kernel/futex.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index eef8cd26b5e5..d546b2d53a62 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -193,6 +193,7 @@ static void drop_futex_key_refs(union futex_key *key) * @uaddr: virtual address of the futex * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED * @key: address where result is stored. + * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE) * * Returns a negative error code or 0 * The key words are stored in *key on success. @@ -203,7 +204,8 @@ static void drop_futex_key_refs(union futex_key *key) * * lock_page() might sleep, the caller should not hold a spinlock. */ -static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key) +static int +get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw) { unsigned long address = (unsigned long)uaddr; struct mm_struct *mm = current->mm; @@ -226,7 +228,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key) * but access_ok() should be faster than find_vma() */ if (!fshared) { - if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))) + if (unlikely(!access_ok(rw, uaddr, sizeof(u32)))) return -EFAULT; key->private.mm = mm; key->private.address = address; @@ -235,7 +237,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key) } again: - err = get_user_pages_fast(address, 1, 0, &page); + err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page); if (err < 0) return err; @@ -677,7 +679,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset) if (!bitset) return -EINVAL; - ret = get_futex_key(uaddr, fshared, &key); + ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ); if (unlikely(ret != 0)) goto out; @@ -723,10 +725,10 @@ futex_wake_op(u32 __user *uaddr1, int fshared, u32 __user *uaddr2, int ret, op_ret; retry: - ret = get_futex_key(uaddr1, fshared, &key1); + ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ); if (unlikely(ret != 0)) goto out; - ret = get_futex_key(uaddr2, fshared, &key2); + ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); if (unlikely(ret != 0)) goto out_put_key1; @@ -814,10 +816,10 @@ static int futex_requeue(u32 __user *uaddr1, int fshared, u32 __user *uaddr2, int ret, drop_count = 0; retry: - ret = get_futex_key(uaddr1, fshared, &key1); + ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ); if (unlikely(ret != 0)) goto out; - ret = get_futex_key(uaddr2, fshared, &key2); + ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_READ); if (unlikely(ret != 0)) goto out_put_key1; @@ -1140,7 +1142,7 @@ static int futex_wait(u32 __user *uaddr, int fshared, q.bitset = bitset; retry: q.key = FUTEX_KEY_INIT; - ret = get_futex_key(uaddr, fshared, &q.key); + ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_READ); if (unlikely(ret != 0)) goto out; @@ -1330,7 +1332,7 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared, q.pi_state = NULL; retry: q.key = FUTEX_KEY_INIT; - ret = get_futex_key(uaddr, fshared, &q.key); + ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE); if (unlikely(ret != 0)) goto out; @@ -1594,7 +1596,7 @@ retry: if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current)) return -EPERM; - ret = get_futex_key(uaddr, fshared, &key); + ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE); if (unlikely(ret != 0)) goto out; From b3bad72e494fb2ff0c81be4ca2ddb94adf6a47c2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 17 May 2009 20:17:06 +0200 Subject: [PATCH 379/670] PCI PM: Fix initialization and kexec breakage for some devices Recent PCI PM changes introduced a bug that causes some devices to be mishandled after kexec and during early initialization. The failure scenario in the kexec case is the following: * Assume a PCI device is not power-manageable by the platform and has PCI_PM_CTRL_NO_SOFT_RESET set in PMCSR. * The device is put into D3 before kexec (using the native PCI PM). * After kexec, pci_setup_device() sets the device's power state to PCI_UNKNOWN. * pci_set_power_state(dev, PCI_D0) is called by the device's driver. * __pci_start_power_transition(dev, PCI_D0) is called and since the device is not power-manageable by the platform, it causes pci_update_current_state(dev, PCI_D0) to be called. As a result the device's current_state field is updated to PCI_D3, in accordance with the contents of its PCI PM registers. * pci_raw_set_power_state() is called and it changes the device power state to D0. *However*, it should also call pci_restore_bars() to reinitialize the device, but it doesn't, because the device's current_state field has been modified earlier. To prevent this from happening, modify pci_platform_power_transition() so that it doesn't use pci_update_current_state() to update the current_state field for devices that aren't power-manageable by the platform. Instead, this field should be updated directly for devices that don't support the native PCI PM. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 34bf0fdf5047..1a91bf9687af 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -557,7 +557,8 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ - pci_update_current_state(dev, PCI_D0); + if (!dev->pm_cap) + dev->current_state = PCI_D0; } return error; From fbaa58696cef848de818768783ef185bd3f05158 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 13 May 2009 12:50:40 -0400 Subject: [PATCH 380/670] TPM: get_event_name stack corruption get_event_name uses sprintf to fill a buffer declared on the stack. It fills the buffer 2 bytes at a time. What the code doesn't take into account is that sprintf(buf, "%02x", data) actually writes 3 bytes. 2 bytes for the data and then it nul terminates the string. Since we declare buf to be 40 characters long and then we write 40 bytes of data into buf sprintf is going to write 41 characters. The fix is to leave room in buf for the nul terminator. Signed-off-by: Eric Paris Signed-off-by: James Morris --- drivers/char/tpm/tpm_bios.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index ed306eb1057f..0c2f55a38b95 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -212,7 +212,8 @@ static int get_event_name(char *dest, struct tcpa_event *event, unsigned char * event_entry) { const char *name = ""; - char data[40] = ""; + /* 41 so there is room for 40 data and 1 nul */ + char data[41] = ""; int i, n_len = 0, d_len = 0; struct tcpa_pc_event *pc_event; From b674137755bbe2750f997a2a1264db3cdf8abcb3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 18 May 2009 11:56:16 +1000 Subject: [PATCH 381/670] drm: Round size of SHM maps to PAGE_SIZE Currently, userspace can fail to obtain the SAREA mapping (among other reasons) if it passes SAREA_MAX to drmAddMap without aligning it to the page size. This breaks for example on PowerPC with 64K pages and radeon despite the kernel radeon actually doing the right rouding in the first place. The way SAREA_MAX is defined with a bunch of ifdef's and duplicated between libdrm and the X server is gross, ultimately it should be retrieved by userspace from the kernel, but in the meantime, we have plenty of existing userspace built with bad values that need to work. This patch works around broken userspace by rounding the requested size in drm_addmap_core() of any SHM map to the page size. Since the backing memory for SHM maps is also allocated within addmap_core, there is no danger of adjacent memory being exposed due to the increased map size. The only side effect is that drivers that previously tried to create or access SHM maps using a size < PAGE_SIZE and failed (getting -EINVAL), will now succeed at the cost of a little bit more memory used if that happens to be when the map is created. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- drivers/gpu/drm/drm_bufs.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 6d80d17f1e96..0411d912d82a 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -170,6 +170,14 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, } DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n", (unsigned long long)map->offset, map->size, map->type); + + /* page-align _DRM_SHM maps. They are allocated here so there is no security + * hole created by that and it works around various broken drivers that use + * a non-aligned quantity to map the SAREA. --BenH + */ + if (map->type == _DRM_SHM) + map->size = PAGE_ALIGN(map->size); + if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) { drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EINVAL; From ff71338ed31398384b2e5992623d52f9aaba1da1 Mon Sep 17 00:00:00 2001 From: Daniel Ribeiro Date: Fri, 15 May 2009 06:33:50 -0300 Subject: [PATCH 382/670] [ARM] pxa/ezx: fix pin configuration for low power mode Fix LPM configuration on ezx.c Signed-off-by: Daniel Ribeiro Signed-off-by: Eric Miao --- arch/arm/mach-pxa/ezx.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 92ba16e1b6fc..7db966dc29ce 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = { GPIO25_SSP1_TXD, GPIO26_SSP1_RXD, GPIO24_GPIO, /* pcap chip select */ - GPIO1_GPIO, /* pcap interrupt */ - GPIO4_GPIO, /* WDI_AP */ - GPIO55_GPIO, /* SYS_RESTART */ + GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */ + GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */ + GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */ /* MMC */ GPIO32_MMC_CLK, @@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = { #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680) static unsigned long gen1_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO12_GPIO, + GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH, /* bluetooth (bcm2035) */ - GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO48_GPIO, /* RESET */ GPIO28_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO57_GPIO, /* AP_RDY */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */ - GPIO82_GPIO, /* RESET */ - GPIO99_GPIO, /* TC_MM_EN */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */ + GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */ + GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ + GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */ /* sound */ GPIO52_SSP3_SCLK, @@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = { defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6) static unsigned long gen2_pin_config[] __initdata = { /* flip / lockswitch */ - GPIO15_GPIO, + GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH, /* EOC */ - GPIO10_GPIO, + GPIO10_GPIO | WAKEUP_ON_EDGE_RISE, /* bluetooth (bcm2045) */ - GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */ + GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */ GPIO37_GPIO, /* RESET */ GPIO57_GPIO, /* WAKEUP */ /* Neptune handshake */ - GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */ - GPIO96_GPIO, /* AP_RDY */ - GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */ - GPIO116_GPIO, /* RESET */ + GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */ + GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */ + GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */ GPIO41_GPIO, /* BP_FLASH */ /* sound */ From d3375ea7213d09284ee3683d8bc075b9d3786a03 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 20 May 2009 08:42:06 +0200 Subject: [PATCH 383/670] cdrom: beyond ARRAY_SIZE of viocd_diskinfo Do not go beyond ARRAY_SIZE of viocd_diskinfo Signed-off-by: Roel Kluin Signed-off-by: Jens Axboe --- drivers/cdrom/viocd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 13929356135c..9b1624e0ddeb 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -587,7 +587,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id) struct device_node *node = vdev->dev.archdata.of_node; deviceno = vdev->unit_address; - if (deviceno > VIOCD_MAX_CD) + if (deviceno >= VIOCD_MAX_CD) return -ENODEV; if (!node) return -ENODEV; From b3b778b387ed3849ebc4a51baf8617be90df6625 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 20 May 2009 17:05:52 +0200 Subject: [PATCH 384/670] ALSA: pcsp - fix printk format warning again The commit 5a641bcd6398841cc4606b0a732d41a09256fd94 changed the printk format to '%lu', but the value passed seems to be dependent on the architecture. On x86-64, I got a new warning now because an int value is passed actaully. As a workaround, just cast the value always to unsigned long. Signed-off-by: Takashi Iwai --- sound/drivers/pcsp/pcsp_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c index 771955a9be71..199b03377142 100644 --- a/sound/drivers/pcsp/pcsp_mixer.c +++ b/sound/drivers/pcsp/pcsp_mixer.c @@ -51,7 +51,7 @@ static int pcsp_treble_info(struct snd_kcontrol *kcontrol, if (uinfo->value.enumerated.item > chip->max_treble) uinfo->value.enumerated.item = chip->max_treble; sprintf(uinfo->value.enumerated.name, "%lu", - PCSP_CALC_RATE(uinfo->value.enumerated.item)); + (unsigned long)PCSP_CALC_RATE(uinfo->value.enumerated.item)); return 0; } From 950312ce22696ddfa42a957bdadaa9c24151e679 Mon Sep 17 00:00:00 2001 From: Andrew Randrianasulu Date: Thu, 14 May 2009 11:29:27 -0700 Subject: [PATCH 385/670] MIPS: IP32: Fix hang on shutdown in power button interrupt handler. The hang was caused by the use of disable_irq() from the interrupt handler itself. Fixed by the use of disable_irq_nosync(). The issue was triggered by: commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 Author: Thomas Gleixner Date: Mon Mar 23 18:28:15 2009 +0100 genirq: add threaded interrupt handler support Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index b6cab089561e..667da932b7b2 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -145,7 +145,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id) "%s: RTC IRQ without RTC_IRQF\n", __func__); } /* Wait until interrupt goes away */ - disable_irq(MACEISA_RTC_IRQ); + disable_irq_nosync(MACEISA_RTC_IRQ); init_timer(&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies + 50; From 7e9e05cad94217498e4d9bd6ef7137b4e9e7ed64 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 16 May 2009 12:23:45 +0100 Subject: [PATCH 386/670] MIPS: IP22: Fix hang in power button interrupt handler The hang was caused by the use of disable_irq() from the interrupt handler itself. Fixed by the use of disable_irq_nosync(). The issue was triggered by: commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 Author: Thomas Gleixner Date: Mon Mar 23 18:28:15 2009 +0100 genirq: add threaded interrupt handler support Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip22/ip22-reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index 4ad5c3393fd3..45b6694c2079 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -148,7 +148,7 @@ static irqreturn_t panel_int(int irq, void *dev_id) if (sgint->istat1 & SGINT_ISTAT1_PWR) { /* Wait until interrupt goes away */ - disable_irq(SGI_PANEL_IRQ); + disable_irq_nosync(SGI_PANEL_IRQ); init_timer(&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies + 5; From 195d1a96ae5fdfbedb8dc4b97afee578921fa99e Mon Sep 17 00:00:00 2001 From: peter fuerst Date: Sun, 17 May 2009 23:49:45 +0200 Subject: [PATCH 387/670] MIPS: IP28: Change to build with -mr10k-cache-barrier=store Richard Sandiford's new code for inserting the cache-barriers, for GCC 4.3 and above and already incorporated in the current GCC-release, uses a slightly different option-syntax. Signed-off-by: peter fuerst Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 26947ab85260..c4cae9e6b802 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -473,12 +473,12 @@ endif # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys # ifdef CONFIG_SGI_IP28 - ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n) - $(error gcc doesn't support needed option -mr10k-cache-barrier=1) + ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n) + $(error gcc doesn't support needed option -mr10k-cache-barrier=store) endif endif core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ -cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28 +cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # From a5e696e5d0f1377ff6beb10d2f40edb6a3d1de18 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 20 May 2009 16:12:32 +1000 Subject: [PATCH 388/670] MIPS: 64-bit: Fix system lockup. The address range size calculation inside local_flush_tlb_kernel_range() is being truncated by a too small size variable holder on 64-bit systems. The truncated size can result in an erroneous tlbsize check that means we sit spinning inside a loop trying to flush a hige number of TLB entries. This is for all intents and purposes a system hang. Fix by using an appropriately sized valiable to hold the size. [Ralf: Greg's original patch submission identified the issue and fixed one instance in tlb-r4k.c but there there were several more. For consistency I also modified tlb-r3k.c even though that file is only used on 32-bit.] Signed-off-by: Greg Ungerer Signed-off-by: Ralf Baechle --- arch/mips/mm/tlb-r3k.c | 6 ++---- arch/mips/mm/tlb-r4k.c | 6 ++---- arch/mips/mm/tlb-r8k.c | 3 +-- 3 files changed, 5 insertions(+), 10 deletions(-) diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index f0cf46adb978..1c0048a6f5cf 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -82,8 +82,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; + unsigned long size, flags; #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", @@ -121,8 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end); diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 9619f66e531e..892be426787c 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -117,8 +117,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; + unsigned long size, flags; ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; @@ -160,8 +159,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c index 4f01a3be215c..4ec95cc2df2f 100644 --- a/arch/mips/mm/tlb-r8k.c +++ b/arch/mips/mm/tlb-r8k.c @@ -111,8 +111,7 @@ out_restore: /* Usable for KV1 addresses only! */ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; From 2b611cb6eed04062d0a9861c82248e02c844ba3f Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Mar 2009 17:47:27 -0400 Subject: [PATCH 389/670] ath5k: fix scanning in AR2424 AR5K_PHY_PLL_40MHZ_5413 should not be ORed with AR5K_PHY_MODE_RAD_RF5112 for 5 GHz channels. The incorrect PLL value breaks scanning in the countries where 5 GHz channels are allowed. Signed-off-by: Pavel Roskin Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 7a17d31b2fd9..faede828c8ff 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -359,7 +359,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial) mode |= AR5K_PHY_MODE_FREQ_5GHZ; if (ah->ah_radio == AR5K_RF5413) - clock |= AR5K_PHY_PLL_40MHZ_5413; + clock = AR5K_PHY_PLL_40MHZ_5413; else clock |= AR5K_PHY_PLL_40MHZ; From 88f16db7a2fa63b9242e8a0fbc40d51722f2e2f9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 May 2009 12:04:30 +0200 Subject: [PATCH 390/670] wext: verify buffer size for SIOCSIWENCODEEXT Another design flaw in wireless extensions (is anybody surprised?) in the way it handles the iw_encode_ext structure: The structure is part of the 'extra' memory but contains the key length explicitly, instead of it just being the length of the extra buffer - size of the struct and using the explicit key length only for the get operation (which only writes it). Therefore, we have this layout: extra: +-------------------------+ | struct iw_encode_ext { | | ... | | u16 key_len; | | u8 key[0]; | | }; | +-------------------------+ | key material | +-------------------------+ Now, all drivers I checked use ext->key_len without checking that both key_len and the struct fit into the extra buffer that has been copied from userspace. This leads to a buffer overrun while reading that buffer, depending on the driver it may be possible to specify arbitrary key_len or it may need to be a proper length for the key algorithm specified. Thankfully, this is only exploitable by root, but root can actually cause a segfault or use kernel memory as a key (which you can even get back with siocgiwencode or siocgiwencodeext from the key buffer). Fix this by verifying that key_len fits into the buffer along with struct iw_encode_ext. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/wext.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/wireless/wext.c b/net/wireless/wext.c index cb6a5bb85d80..0e59f9ae9b81 100644 --- a/net/wireless/wext.c +++ b/net/wireless/wext.c @@ -786,6 +786,13 @@ static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd, err = -EFAULT; goto out; } + + if (cmd == SIOCSIWENCODEEXT) { + struct iw_encode_ext *ee = (void *) extra; + + if (iwp->length < sizeof(*ee) + ee->key_len) + return -EFAULT; + } } err = handler(dev, info, (union iwreq_data *) iwp, extra); From a54be5d43aa2d6febc5a4f8dd3b87b9429b60437 Mon Sep 17 00:00:00 2001 From: Forrest Zhang Date: Wed, 13 May 2009 11:14:39 -0400 Subject: [PATCH 391/670] ath5k: fix exp off-by-one when computing OFDM delta slope Commit e8f055f0c3b ("ath5k: Update reset code") subtly changed the code that computes floating point values for the PHY3_TIMING register such that the exponent is off by a decimal point, which can cause problems with OFDM channel operation. get_bitmask_order() actually returns the highest bit set plus one, whereas the previous code wanted the highest bit set. Instead, use ilog2 which is what this code is really calculating. Also check coef_scaled to handle the (invalid) case where we need log2(0). Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/reset.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index faede828c8ff..5f72c111c2e8 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -26,7 +26,7 @@ \*****************************/ #include /* To determine if a card is pci-e */ -#include /* For get_bitmask_order */ +#include #include "ath5k.h" #include "reg.h" #include "base.h" @@ -69,10 +69,10 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah, /* Get exponent * ALGO: coef_exp = 14 - highest set bit position */ - coef_exp = get_bitmask_order(coef_scaled); + coef_exp = ilog2(coef_scaled); /* Doesn't make sense if it's zero*/ - if (!coef_exp) + if (!coef_scaled || !coef_exp) return -EINVAL; /* Note: we've shifted coef_scaled by 24 */ From fbc9f97bbf5e1eaee562eba93dc60faaff3f3bfa Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Fri, 15 May 2009 16:13:46 -0700 Subject: [PATCH 392/670] iwlwifi: do not cancel delayed work inside spin_lock_irqsave Calling cancel_delayed_work() from inside spin_lock_irqsave, introduces a potential deadlock. As explained by Johannes Berg A - lock T - timer phase CPU 1 CPU 2 --------------------------------------------- some place that calls cancel_timer_sync() (which is the | code) lock-irq(A) | "lock-irq"(T) | "unlock"(T) | wait(T) unlock(A) timer softirq "lock"(T) run(T) "unlock"(T) irq handler lock(A) unlock(A) Now all that again, interleaved, leading to deadlock: lock-irq(A) "lock"(T) run(T) IRQ during or maybe before run(T) --> lock(A) "lock-irq"(T) wait(T) We fix this by moving the call to cancel_delayed_work() into workqueue. There are cases where the work may not actually be queued or running at the time we are trying to cancel it, but cancel_delayed_work() is able to deal with this. Also cleanup iwl_set_mode related to this call. This function (iwl_set_mode) is only called when bringing interface up and there will thus not be any scanning done. No need to try to cancel scanning. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13224, which was also reported at http://marc.info/?l=linux-wireless&m=124081921903223&w=2 . Tested-by: Miles Lane Signed-off-by: Reinette Chatre Acked-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 7 ------- drivers/net/wireless/iwlwifi/iwl-scan.c | 7 ++++--- drivers/net/wireless/iwlwifi/iwl3945-base.c | 9 ++------- 3 files changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 3bb28db4a40f..f46ba2475776 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -669,13 +669,6 @@ static int iwl_set_mode(struct iwl_priv *priv, int mode) if (!iwl_is_ready_rf(priv)) return -EAGAIN; - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - return -EAGAIN; - } - iwl_commit_rxon(priv); return 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index e7c65c4f741b..6330b91e37ce 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -227,9 +227,6 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv, /* The HW is no longer scanning */ clear_bit(STATUS_SCAN_HW, &priv->status); - /* The scan completion notification came in, so kill that timer... */ - cancel_delayed_work(&priv->scan_check); - IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n", (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? "2.4" : "5.2", @@ -712,6 +709,8 @@ static void iwl_bg_request_scan(struct work_struct *data) mutex_lock(&priv->mutex); + cancel_delayed_work(&priv->scan_check); + if (!iwl_is_ready(priv)) { IWL_WARN(priv, "request scan called when driver not ready.\n"); goto done; @@ -925,6 +924,8 @@ void iwl_bg_scan_completed(struct work_struct *work) IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); + cancel_delayed_work(&priv->scan_check); + ieee80211_scan_completed(priv->hw, false); if (test_bit(STATUS_EXIT_PENDING, &priv->status)) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4cce66133500..ff4d0e41d7c4 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -782,13 +782,6 @@ static int iwl3945_set_mode(struct iwl_priv *priv, int mode) if (!iwl_is_ready_rf(priv)) return -EAGAIN; - cancel_delayed_work(&priv->scan_check); - if (iwl_scan_cancel_timeout(priv, 100)) { - IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); - IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); - return -EAGAIN; - } - iwl3945_commit_rxon(priv); return 0; @@ -3298,6 +3291,8 @@ static void iwl3945_bg_request_scan(struct work_struct *data) mutex_lock(&priv->mutex); + cancel_delayed_work(&priv->scan_check); + if (!iwl_is_ready(priv)) { IWL_WARN(priv, "request scan called when driver not ready.\n"); goto done; From 875690c378d64d9ee2de15cad8206d3f11ae5096 Mon Sep 17 00:00:00 2001 From: Fabio Rossi Date: Wed, 1 Apr 2009 20:37:50 +0200 Subject: [PATCH 393/670] ath5k: fix interpolation with equal power levels When the EEPROM contains weird values for the power levels we have to fix the interpolation process. Signed-off-by: Fabio Rossi Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- drivers/net/wireless/ath5k/phy.c | 43 +++++++++++++++++++------------- 1 file changed, 25 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index 9e2faae5ae94..b48b29dca3d2 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -1487,28 +1487,35 @@ ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, { s8 tmp; s16 min_pwrL, min_pwrR; - s16 pwr_i = pwrL[0]; + s16 pwr_i; - do { - pwr_i--; - tmp = (s8) ath5k_get_interpolated_value(pwr_i, - pwrL[0], pwrL[1], - stepL[0], stepL[1]); + if (pwrL[0] == pwrL[1]) + min_pwrL = pwrL[0]; + else { + pwr_i = pwrL[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrL[0], pwrL[1], + stepL[0], stepL[1]); + } while (tmp > 1); - } while (tmp > 1); + min_pwrL = pwr_i; + } - min_pwrL = pwr_i; + if (pwrR[0] == pwrR[1]) + min_pwrR = pwrR[0]; + else { + pwr_i = pwrR[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrR[0], pwrR[1], + stepR[0], stepR[1]); + } while (tmp > 1); - pwr_i = pwrR[0]; - do { - pwr_i--; - tmp = (s8) ath5k_get_interpolated_value(pwr_i, - pwrR[0], pwrR[1], - stepR[0], stepR[1]); - - } while (tmp > 1); - - min_pwrR = pwr_i; + min_pwrR = pwr_i; + } /* Keep the right boundary so that it works for both curves */ return max(min_pwrL, min_pwrR); From 267d493b322b05984048aef8ea9b5b213490bbe0 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 20 May 2009 10:51:41 -0400 Subject: [PATCH 394/670] airo: fix airo_get_encode{,ext} buffer overflow like I mean it... "airo: airo_get_encode{,ext} potential buffer overflow" was actually a no-op, due to an unrecognized type overflow in an assignment. Oddly, gcc only seems to tell me about it when using -Wextra...grrr... Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index d73475739127..9eabf4d1f2e7 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -6467,6 +6467,7 @@ static int airo_get_encode(struct net_device *dev, { struct airo_info *local = dev->ml_priv; int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; + int wep_key_len; u8 buf[16]; if (!local->wep_capable) @@ -6500,11 +6501,13 @@ static int airo_get_encode(struct net_device *dev, dwrq->flags |= index + 1; /* Copy the key to the user buffer */ - dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf)); - if (dwrq->length != -1) - memcpy(extra, buf, dwrq->length); - else + wep_key_len = get_wep_key(local, index, &buf[0], sizeof(buf)); + if (wep_key_len < 0) { dwrq->length = 0; + } else { + dwrq->length = wep_key_len; + memcpy(extra, buf, dwrq->length); + } return 0; } @@ -6617,7 +6620,7 @@ static int airo_get_encodeext(struct net_device *dev, struct airo_info *local = dev->ml_priv; struct iw_point *encoding = &wrqu->encoding; struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; - int idx, max_key_len; + int idx, max_key_len, wep_key_len; u8 buf[16]; if (!local->wep_capable) @@ -6661,11 +6664,13 @@ static int airo_get_encodeext(struct net_device *dev, memset(extra, 0, 16); /* Copy the key to the user buffer */ - ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); - if (ext->key_len != -1) - memcpy(extra, buf, ext->key_len); - else + wep_key_len = get_wep_key(local, idx, &buf[0], sizeof(buf)); + if (wep_key_len < 0) { ext->key_len = 0; + } else { + ext->key_len = wep_key_len; + memcpy(extra, buf, ext->key_len); + } return 0; } From 5078b2e32ad4b1f753b1c837c15892202f753c97 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 13 May 2009 17:04:42 -0400 Subject: [PATCH 395/670] cfg80211: fix race between core hint and driver's custom apply Its possible for cfg80211 to have scheduled the work and for the global workqueue to not have kicked in prior to a cfg80211 driver's regulatory hint or wiphy_apply_custom_regulatory(). Although this is very unlikely its possible and should fix this race. When this race would happen you are expected to have hit a null pointer dereference panic. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez Tested-by: Alan Jenkins Signed-off-by: John W. Linville --- net/wireless/reg.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 08265ca15785..487cb627ddba 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1551,6 +1551,13 @@ static int regulatory_hint_core(const char *alpha2) queue_regulatory_request(request); + /* + * This ensures last_request is populated once modules + * come swinging in and calling regulatory hints and + * wiphy_apply_custom_regulatory(). + */ + flush_scheduled_work(); + return 0; } From c9d2fbf36df5e04efa226614093bb1bacc6fe131 Mon Sep 17 00:00:00 2001 From: Jay Sternberg Date: Tue, 19 May 2009 14:56:36 -0700 Subject: [PATCH 396/670] iwlwifi: update 5000 ucode support to version 2 of API enable iwl driver to support 5000 ucode having version 2 of API Signed-off-by: Jay Sternberg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index e5ca2511a81a..9452461ce864 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -46,7 +46,7 @@ #include "iwl-6000-hw.h" /* Highest firmware API version supported */ -#define IWL5000_UCODE_API_MAX 1 +#define IWL5000_UCODE_API_MAX 2 #define IWL5150_UCODE_API_MAX 2 /* Lowest firmware API version supported */ From a6c67339784db5763d6f20ae1881aeebe8c5a9f4 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 20 May 2009 02:12:56 +0200 Subject: [PATCH 397/670] wireless: beyond ARRAY_SIZE of intf->crypto_stats Do not go beyond ARRAY_SIZE of intf->crypto_stats Signed-off-by: Roel Kluin Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index 07d378ef0b46..7b3ee8c2eaef 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -138,7 +138,7 @@ void rt2x00debug_update_crypto(struct rt2x00_dev *rt2x00dev, if (cipher == CIPHER_TKIP_NO_MIC) cipher = CIPHER_TKIP; - if (cipher == CIPHER_NONE || cipher > CIPHER_MAX) + if (cipher == CIPHER_NONE || cipher >= CIPHER_MAX) return; /* Remove CIPHER_NONE index */ From 9b6fe313bfce27d4a261257da70196be0ac2bef5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Wed, 20 May 2009 13:32:00 +0200 Subject: [PATCH 398/670] drm: Copy back ioctl data to userspace regardless of return code. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes a regression from commit 9d5b3ffc42f7820e8ee07705496955e4c2c38dd9 ('drm: fixup some of the ioctl function exit paths'): The vblank ioctl needs to update the userspace parameters when interrupted by a signal, which was prevented by the return code check. This could cause the X server to hang in drmWaitVBlank(). Signed-off-by: Michel Dänzer Signed-off-by: Jesse Barnes --- drivers/gpu/drm/drm_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index f01def16a669..019b7c578236 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -481,7 +481,7 @@ int drm_ioctl(struct inode *inode, struct file *filp, } retcode = func(dev, kdata, file_priv); - if ((retcode == 0) && (cmd & IOC_OUT)) { + if (cmd & IOC_OUT) { if (copy_to_user((void __user *)arg, kdata, _IOC_SIZE(cmd)) != 0) retcode = -EFAULT; From 03fbdb15c14e9746c63168e3ff2c64b9c8336d33 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Wed, 20 May 2009 22:39:08 +0100 Subject: [PATCH 399/670] [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void * The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini Signed-off-by: Russell King --- drivers/input/serio/ambakmi.c | 2 +- drivers/mmc/host/mmci.c | 2 +- drivers/rtc/rtc-pl030.c | 2 +- drivers/rtc/rtc-pl031.c | 2 +- drivers/serial/amba-pl010.c | 2 +- drivers/serial/amba-pl011.c | 2 +- drivers/video/amba-clcd.c | 2 +- include/linux/amba/bus.h | 2 +- sound/arm/aaci.c | 2 +- 9 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index e29cdc13a199..a28c06d686e1 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -107,7 +107,7 @@ static void amba_kmi_close(struct serio *io) clk_disable(kmi->clk); } -static int amba_kmi_probe(struct amba_device *dev, void *id) +static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id) { struct amba_kmi_port *kmi; struct serio *io; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 36875dcfa492..7d4febdab286 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data) mod_timer(&host->timer, jiffies + HZ); } -static int __devinit mmci_probe(struct amba_device *dev, void *id) +static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) { struct mmc_platform_data *plat = dev->dev.platform_data; struct mmci_host *host; diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c index 826153552157..aaf1f75fa293 100644 --- a/drivers/rtc/rtc-pl030.c +++ b/drivers/rtc/rtc-pl030.c @@ -102,7 +102,7 @@ static const struct rtc_class_ops pl030_ops = { .set_alarm = pl030_set_alarm, }; -static int pl030_probe(struct amba_device *dev, void *id) +static int pl030_probe(struct amba_device *dev, struct amba_id *id) { struct pl030_rtc *rtc; int ret; diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 333eec689d2f..451fc13784d1 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -127,7 +127,7 @@ static int pl031_remove(struct amba_device *adev) return 0; } -static int pl031_probe(struct amba_device *adev, void *id) +static int pl031_probe(struct amba_device *adev, struct amba_id *id) { int ret; struct pl031_local *ldata; diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index e3a5ad5ef1d6..cdc049d4350f 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -665,7 +665,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl010_probe(struct amba_device *dev, void *id) +static int pl010_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 8b2b9700f3e4..88fdac51b6c5 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -729,7 +729,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl011_probe(struct amba_device *dev, void *id) +static int pl011_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 61050ab14128..d1f80bac54f0 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -437,7 +437,7 @@ static int clcdfb_register(struct clcd_fb *fb) return ret; } -static int clcdfb_probe(struct amba_device *dev, void *id) +static int clcdfb_probe(struct amba_device *dev, struct amba_id *id) { struct clcd_board *board = dev->dev.platform_data; struct clcd_fb *fb; diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 51e6e54b2aa1..9b93cafa82a0 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -28,7 +28,7 @@ struct amba_id { struct amba_driver { struct device_driver drv; - int (*probe)(struct amba_device *, void *); + int (*probe)(struct amba_device *, struct amba_id *); int (*remove)(struct amba_device *); void (*shutdown)(struct amba_device *); int (*suspend)(struct amba_device *, pm_message_t); diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 7fbd68fab944..5c48e36038f2 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -1074,7 +1074,7 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci) return i; } -static int __devinit aaci_probe(struct amba_device *dev, void *id) +static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) { struct aaci *aaci; int ret, i; From cf8da764fc6959b7efb482f375dfef9830e98205 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 19 May 2009 18:54:22 +0000 Subject: [PATCH 400/670] net: fix length computation in rt_check_expire() rt_check_expire() computes average and standard deviation of chain lengths, but not correclty reset length to 0 at beginning of each chain. This probably gives overflows for sum2 (and sum) on loaded machines instead of meaningful results. Signed-off-by: Eric Dumazet Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/ipv4/route.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index c4c60e9f068a..869cf1c44b78 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -785,7 +785,7 @@ static void rt_check_expire(void) static unsigned int rover; unsigned int i = rover, goal; struct rtable *rth, **rthp; - unsigned long length = 0, samples = 0; + unsigned long samples = 0; unsigned long sum = 0, sum2 = 0; u64 mult; @@ -795,9 +795,9 @@ static void rt_check_expire(void) goal = (unsigned int)mult; if (goal > rt_hash_mask) goal = rt_hash_mask + 1; - length = 0; for (; goal > 0; goal--) { unsigned long tmo = ip_rt_gc_timeout; + unsigned long length; i = (i + 1) & rt_hash_mask; rthp = &rt_hash_table[i].chain; @@ -809,6 +809,7 @@ static void rt_check_expire(void) if (*rthp == NULL) continue; + length = 0; spin_lock_bh(rt_hash_lock_addr(i)); while ((rth = *rthp) != NULL) { if (rt_is_expired(rth)) { From 1ddbcb005c395518c2cd0df504cff3d4b5c85853 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 19 May 2009 20:14:28 +0000 Subject: [PATCH 401/670] net: fix rtable leak in net/ipv4/route.c Alexander V. Lukyanov found a regression in 2.6.29 and made a complete analysis found in http://bugzilla.kernel.org/show_bug.cgi?id=13339 Quoted here because its a perfect one : begin_of_quotation 2.6.29 patch has introduced flexible route cache rebuilding. Unfortunately the patch has at least one critical flaw, and another problem. rt_intern_hash calculates rthi pointer, which is later used for new entry insertion. The same loop calculates cand pointer which is used to clean the list. If the pointers are the same, rtable leak occurs, as first the cand is removed then the new entry is appended to it. This leak leads to unregister_netdevice problem (usage count > 0). Another problem of the patch is that it tries to insert the entries in certain order, to facilitate counting of entries distinct by all but QoS parameters. Unfortunately, referencing an existing rtable entry moves it to list beginning, to speed up further lookups, so the carefully built order is destroyed. For the first problem the simplest patch it to set rthi=0 when rthi==cand, but it will also destroy the ordering. end_of_quotation Problematic commit is 1080d709fb9d8cd4392f93476ee46a9d6ea05a5b (net: implement emergency route cache rebulds when gc_elasticity is exceeded) Trying to keep dst_entries ordered is too complex and breaks the fact that order should depend on the frequency of use for garbage collection. A possible fix is to make rt_intern_hash() simpler, and only makes rt_check_expire() a litle bit smarter, being able to cope with an arbitrary entries order. The added loop is running on cache hot data, while cpu is prefetching next object, so should be unnoticied. Reported-and-analyzed-by: Alexander V. Lukyanov Signed-off-by: Eric Dumazet Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/ipv4/route.c | 55 +++++++++++++++--------------------------------- 1 file changed, 17 insertions(+), 38 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 869cf1c44b78..28205e5bfa9b 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -784,7 +784,7 @@ static void rt_check_expire(void) { static unsigned int rover; unsigned int i = rover, goal; - struct rtable *rth, **rthp; + struct rtable *rth, *aux, **rthp; unsigned long samples = 0; unsigned long sum = 0, sum2 = 0; u64 mult; @@ -812,6 +812,7 @@ static void rt_check_expire(void) length = 0; spin_lock_bh(rt_hash_lock_addr(i)); while ((rth = *rthp) != NULL) { + prefetch(rth->u.dst.rt_next); if (rt_is_expired(rth)) { *rthp = rth->u.dst.rt_next; rt_free(rth); @@ -820,33 +821,30 @@ static void rt_check_expire(void) if (rth->u.dst.expires) { /* Entry is expired even if it is in use */ if (time_before_eq(jiffies, rth->u.dst.expires)) { +nofree: tmo >>= 1; rthp = &rth->u.dst.rt_next; /* - * Only bump our length if the hash - * inputs on entries n and n+1 are not - * the same, we only count entries on + * We only count entries on * a chain with equal hash inputs once * so that entries for different QOS * levels, and other non-hash input * attributes don't unfairly skew * the length computation */ - if ((*rthp == NULL) || - !compare_hash_inputs(&(*rthp)->fl, - &rth->fl)) - length += ONE; + for (aux = rt_hash_table[i].chain;;) { + if (aux == rth) { + length += ONE; + break; + } + if (compare_hash_inputs(&aux->fl, &rth->fl)) + break; + aux = aux->u.dst.rt_next; + } continue; } - } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout)) { - tmo >>= 1; - rthp = &rth->u.dst.rt_next; - if ((*rthp == NULL) || - !compare_hash_inputs(&(*rthp)->fl, - &rth->fl)) - length += ONE; - continue; - } + } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout)) + goto nofree; /* Cleanup aged off entries. */ *rthp = rth->u.dst.rt_next; @@ -1069,7 +1067,6 @@ out: return 0; static int rt_intern_hash(unsigned hash, struct rtable *rt, struct rtable **rp) { struct rtable *rth, **rthp; - struct rtable *rthi; unsigned long now; struct rtable *cand, **candp; u32 min_score; @@ -1089,7 +1086,6 @@ restart: } rthp = &rt_hash_table[hash].chain; - rthi = NULL; spin_lock_bh(rt_hash_lock_addr(hash)); while ((rth = *rthp) != NULL) { @@ -1135,17 +1131,6 @@ restart: chain_length++; rthp = &rth->u.dst.rt_next; - - /* - * check to see if the next entry in the chain - * contains the same hash input values as rt. If it does - * This is where we will insert into the list, instead of - * at the head. This groups entries that differ by aspects not - * relvant to the hash function together, which we use to adjust - * our chain length - */ - if (*rthp && compare_hash_inputs(&(*rthp)->fl, &rt->fl)) - rthi = rth; } if (cand) { @@ -1206,10 +1191,7 @@ restart: } } - if (rthi) - rt->u.dst.rt_next = rthi->u.dst.rt_next; - else - rt->u.dst.rt_next = rt_hash_table[hash].chain; + rt->u.dst.rt_next = rt_hash_table[hash].chain; #if RT_CACHE_DEBUG >= 2 if (rt->u.dst.rt_next) { @@ -1225,10 +1207,7 @@ restart: * previous writes to rt are comitted to memory * before making rt visible to other CPUS. */ - if (rthi) - rcu_assign_pointer(rthi->u.dst.rt_next, rt); - else - rcu_assign_pointer(rt_hash_table[hash].chain, rt); + rcu_assign_pointer(rt_hash_table[hash].chain, rt); spin_unlock_bh(rt_hash_lock_addr(hash)); *rp = rt; From 4f72427998b105392e60bae7a6798a0c96fe4f0a Mon Sep 17 00:00:00 2001 From: Jean-Mickael Guerin Date: Wed, 20 May 2009 17:38:59 -0700 Subject: [PATCH 402/670] IPv6: set RTPROT_KERNEL to initial route The use of unspecified protocol in IPv6 initial route prevents quagga to install IPv6 default route: # show ipv6 route S ::/0 [1/0] via fe80::1, eth1_0 K>* ::/0 is directly connected, lo, rej C>* ::1/128 is directly connected, lo C>* fe80::/64 is directly connected, eth1_0 # ip -6 route fe80::/64 dev eth1_0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit -1 ff00::/8 dev eth1_0 metric 256 mtu 1500 advmss 1440 hoplimit -1 unreachable default dev lo proto none metric -1 error -101 hoplimit 255 The attached patch ensures RTPROT_KERNEL to the default initial route and fixes the problem for quagga. This is similar to "ipv6: protocol for address routes" f410a1fba7afa79d2992620e874a343fdba28332. # show ipv6 route S>* ::/0 [1/0] via fe80::1, eth1_0 C>* ::1/128 is directly connected, lo C>* fe80::/64 is directly connected, eth1_0 # ip -6 route fe80::/64 dev eth1_0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit -1 fe80::/64 dev eth1_0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit -1 ff00::/8 dev eth1_0 metric 256 mtu 1500 advmss 1440 hoplimit -1 default via fe80::1 dev eth1_0 proto zebra metric 1024 mtu 1500 advmss 1440 hoplimit -1 unreachable default dev lo proto kernel metric -1 error -101 hoplimit 255 Signed-off-by: Jean-Mickael Guerin Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv6/route.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 1394ddb6e35c..032a5ec391c5 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -137,6 +137,7 @@ static struct rt6_info ip6_null_entry_template = { } }, .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP), + .rt6i_protocol = RTPROT_KERNEL, .rt6i_metric = ~(u32) 0, .rt6i_ref = ATOMIC_INIT(1), }; @@ -159,6 +160,7 @@ static struct rt6_info ip6_prohibit_entry_template = { } }, .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP), + .rt6i_protocol = RTPROT_KERNEL, .rt6i_metric = ~(u32) 0, .rt6i_ref = ATOMIC_INIT(1), }; @@ -176,6 +178,7 @@ static struct rt6_info ip6_blk_hole_entry_template = { } }, .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP), + .rt6i_protocol = RTPROT_KERNEL, .rt6i_metric = ~(u32) 0, .rt6i_ref = ATOMIC_INIT(1), }; From 385aa9e7012d35b017981e67b3464aef4e1e7108 Mon Sep 17 00:00:00 2001 From: Thomas Reitmayr Date: Tue, 19 May 2009 19:35:26 +0200 Subject: [PATCH 403/670] [ARM] Kirkwood: Correct MPP for SATA activity/presence LEDs of QNAP TS-119/TS-219. For the QNAP TS-119 and TS-219 the wrong MPPs were used for the SATA activity/presence LEDs. The new settings make these LEDs work as expected. Signed-off-by: Thomas Reitmayr Tested-by: Martin Michlmayr Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/ts219-setup.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c index dda5743cf3e0..01aa213c0a6f 100644 --- a/arch/arm/mach-kirkwood/ts219-setup.c +++ b/arch/arm/mach-kirkwood/ts219-setup.c @@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP1_SPI_MOSI, MPP2_SPI_SCK, MPP3_SPI_MISO, + MPP4_SATA1_ACTn, + MPP5_SATA0_ACTn, MPP8_TW_SDA, MPP9_TW_SCK, MPP10_UART0_TXD, @@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP14_UART1_RXD, /* PIC controller */ MPP15_GPIO, /* USB Copy button */ MPP16_GPIO, /* Reset button */ - MPP20_SATA1_ACTn, - MPP21_SATA0_ACTn, - MPP22_SATA1_PRESENTn, - MPP23_SATA0_PRESENTn, 0 }; From 98f32602d42951e61a059685f842aa7d778ffab0 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 21 May 2009 20:33:58 +0100 Subject: [PATCH 404/670] hugh: update email address My old address will shut down in a few days time: remove it from the tree, and add a tmpfs (shmem filesystem) maintainer entry with the new address. Signed-off-by: Hugh Dickins Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- Documentation/filesystems/tmpfs.txt | 2 +- MAINTAINERS | 8 ++++++++ mm/rmap.c | 2 +- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt index 222437efd75a..3015da0c6b2a 100644 --- a/Documentation/filesystems/tmpfs.txt +++ b/Documentation/filesystems/tmpfs.txt @@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root. Author: Christoph Rohland , 1.12.01 Updated: - Hugh Dickins , 4 June 2007 + Hugh Dickins, 4 June 2007 diff --git a/MAINTAINERS b/MAINTAINERS index 2b349ba4add4..64ea80e45e3b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5579,6 +5579,14 @@ M: ian@mnementh.co.uk S: Maintained F: drivers/mmc/host/tmio_mmc.* +TMPFS (SHMEM FILESYSTEM) +P: Hugh Dickins +M: hugh.dickins@tiscali.co.uk +L: linux-mm@kvack.org +S: Maintained +F: include/linux/shmem_fs.h +F: mm/shmem.c + TPM DEVICE DRIVER P: Debora Velarde M: debora@linux.vnet.ibm.com diff --git a/mm/rmap.c b/mm/rmap.c index 16521664010d..23122af32611 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -14,7 +14,7 @@ * Original design by Rik van Riel 2001 * File methods by Dave McCracken 2003, 2004 * Anonymous methods by Andrea Arcangeli 2004 - * Contributions by Hugh Dickins 2003, 2004 + * Contributions by Hugh Dickins 2003, 2004 */ /* From 85bc26211c6a2c6e82c2403697f8ce44e9587215 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Tue, 19 May 2009 12:30:52 +0200 Subject: [PATCH 405/670] [ARM] Orion: Remove explicit name for platform device resources Remove explicit names from platform device resources since they will automatically be named after the platform device they're associated with. Signed-off-by: Martin Michlmayr Acked-by: Russell King Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 2 -- arch/arm/mach-mv78xx0/common.c | 4 ---- arch/arm/mach-orion5x/common.c | 2 -- 3 files changed, 8 deletions(-) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index eeb00240d784..3fab82a4c8fc 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -386,12 +386,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = { static struct resource kirkwood_i2c_resources[] = { { - .name = "i2c", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c", .start = IRQ_KIRKWOOD_TWSI, .end = IRQ_KIRKWOOD_TWSI, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 9ba595083dab..0d88eea6a09c 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -532,12 +532,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = { static struct resource mv78xx0_i2c_0_resources[] = { { - .name = "i2c 0 base", .start = I2C_0_PHYS_BASE, .end = I2C_0_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 0 irq", .start = IRQ_MV78XX0_I2C_0, .end = IRQ_MV78XX0_I2C_0, .flags = IORESOURCE_IRQ, @@ -567,12 +565,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = { static struct resource mv78xx0_i2c_1_resources[] = { { - .name = "i2c 1 base", .start = I2C_1_PHYS_BASE, .end = I2C_1_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c 1 irq", .start = IRQ_MV78XX0_I2C_1, .end = IRQ_MV78XX0_I2C_1, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 6af99ddabdfb..a51fb9dd65a7 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -248,12 +248,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { static struct resource orion5x_i2c_resources[] = { { - .name = "i2c base", .start = I2C_PHYS_BASE, .end = I2C_PHYS_BASE + 0x1f, .flags = IORESOURCE_MEM, }, { - .name = "i2c irq", .start = IRQ_ORION5X_I2C, .end = IRQ_ORION5X_I2C, .flags = IORESOURCE_IRQ, From c40499e04b2005e61f989824251f9343b55f96bb Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 21 May 2009 15:04:15 -0700 Subject: [PATCH 406/670] gigaset: beyond ARRAY_SIZE of iwb->data Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/isdn/gigaset/isocdata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c index b171e75cb52e..29808c4fb1cb 100644 --- a/drivers/isdn/gigaset/isocdata.c +++ b/drivers/isdn/gigaset/isocdata.c @@ -175,7 +175,7 @@ int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size) return -EINVAL; } src = iwb->read; - if (unlikely(limit > BAS_OUTBUFSIZE + BAS_OUTBUFPAD || + if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD || (read < src && limit >= src))) { pr_err("isoc write buffer frame reservation violated\n"); return -EFAULT; From 5b5f792a6a9a2f9ae812d151ed621f72e99b1725 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 21 May 2009 15:07:12 -0700 Subject: [PATCH 407/670] pktgen: do not access flows[] beyond its length typo -- pkt_dev->nflows is for stats only, the number of concurrent flows is stored in cflows. Reported-By: Vladimir Ivashchenko Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- net/core/pktgen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 3779c1438c11..0666a827bc62 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2447,7 +2447,7 @@ static inline void free_SAs(struct pktgen_dev *pkt_dev) if (pkt_dev->cflows) { /* let go of the SAs if we have them */ int i = 0; - for (; i < pkt_dev->nflows; i++){ + for (; i < pkt_dev->cflows; i++) { struct xfrm_state *x = pkt_dev->flows[i].x; if (x) { xfrm_state_put(x); From 3ed18d76d959e5cbfa5d70c8f7ba95476582a556 Mon Sep 17 00:00:00 2001 From: Robert Olsson Date: Thu, 21 May 2009 15:20:59 -0700 Subject: [PATCH 408/670] ipv4: Fix oops with FIB_TRIE It seems we can fix this by disabling preemption while we re-balance the trie. This is with the CONFIG_CLASSIC_RCU. It's been stress-tested at high loads continuesly taking a full BGP table up/down via iproute -batch. Note. fib_trie is not updated for CONFIG_PREEMPT_RCU Reported-by: Andrei Popa Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index ec0ae490f0b6..33c7c85dfe40 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -986,9 +986,12 @@ fib_find_node(struct trie *t, u32 key) static struct node *trie_rebalance(struct trie *t, struct tnode *tn) { int wasfull; - t_key cindex, key = tn->key; + t_key cindex, key; struct tnode *tp; + preempt_disable(); + key = tn->key; + while (tn != NULL && (tp = node_parent((struct node *)tn)) != NULL) { cindex = tkey_extract_bits(key, tp->pos, tp->bits); wasfull = tnode_full(tp, tnode_get_child(tp, cindex)); @@ -1007,6 +1010,7 @@ static struct node *trie_rebalance(struct trie *t, struct tnode *tn) if (IS_TNODE(tn)) tn = (struct tnode *)resize(t, (struct tnode *)tn); + preempt_enable(); return (struct node *)tn; } From 0975ecba3b670df7c488a5e0e6fe9f1f370a8ad8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 21 May 2009 15:22:02 -0700 Subject: [PATCH 409/670] RxRPC: Error handling for rxrpc_alloc_connection() rxrpc_alloc_connection() doesn't return an error code on failure, it just returns NULL. IS_ERR(NULL) is false. Signed-off-by: Dan Carpenter Signed-off-by: David Howells Signed-off-by: David S. Miller --- net/rxrpc/ar-connection.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/rxrpc/ar-connection.c b/net/rxrpc/ar-connection.c index 0f1218b8d289..67e38a056240 100644 --- a/net/rxrpc/ar-connection.c +++ b/net/rxrpc/ar-connection.c @@ -343,9 +343,9 @@ static int rxrpc_connect_exclusive(struct rxrpc_sock *rx, /* not yet present - create a candidate for a new connection * and then redo the check */ conn = rxrpc_alloc_connection(gfp); - if (IS_ERR(conn)) { - _leave(" = %ld", PTR_ERR(conn)); - return PTR_ERR(conn); + if (!conn) { + _leave(" = -ENOMEM"); + return -ENOMEM; } conn->trans = trans; @@ -508,9 +508,9 @@ int rxrpc_connect_call(struct rxrpc_sock *rx, /* not yet present - create a candidate for a new connection and then * redo the check */ candidate = rxrpc_alloc_connection(gfp); - if (IS_ERR(candidate)) { - _leave(" = %ld", PTR_ERR(candidate)); - return PTR_ERR(candidate); + if (!candidate) { + _leave(" = -ENOMEM"); + return -ENOMEM; } candidate->trans = trans; From 703a3b8e5c01cf6fb33c6d8dc99905f889a4e992 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 21 May 2009 22:21:53 +0000 Subject: [PATCH 410/670] [CIFS] fix posix open regression Posix open code was not properly adding the file to the list of open files. Fix allocating cifsFileInfo more than once, and adding twice to flist and tlist. Also fix mode setting to be done in one place in these paths. Signed-off-by: Steve French Reviewed-by: Shirish Pargaonkar Tested-by: Jeff Layton Tested-by: Luca Tettamanti --- fs/cifs/dir.c | 14 +++++------ fs/cifs/file.c | 66 ++++++++++++++++++++++++++++---------------------- 2 files changed, 44 insertions(+), 36 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 11431ed72a7f..f49d684edd96 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -225,6 +225,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode, if (!(oflags & FMODE_READ)) write_only = true; + mode &= ~current_umask(); rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode, pnetfid, presp_data, &oplock, full_path, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & @@ -310,7 +311,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, return -ENOMEM; } - mode &= ~current_umask(); if (oplockEnabled) oplock = REQ_OPLOCK; @@ -336,7 +336,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, else /* success, no need to query */ goto cifs_create_set_dentry; } else if ((rc != -EIO) && (rc != -EREMOTE) && - (rc != -EOPNOTSUPP)) /* path not found or net err */ + (rc != -EOPNOTSUPP) && (rc != -EINVAL)) goto cifs_create_out; /* else fallthrough to retry, using older open call, this is case where server does not support this SMB level, and @@ -609,7 +609,6 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, int xid; int rc = 0; /* to get around spurious gcc warning, set to zero here */ int oplock = 0; - int mode; __u16 fileHandle = 0; bool posix_open = false; struct cifs_sb_info *cifs_sb; @@ -660,13 +659,12 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, if (pTcon->unix_ext) { if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && - (nd->flags & LOOKUP_OPEN)) { + (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open) { if (!((nd->intent.open.flags & O_CREAT) && (nd->intent.open.flags & O_EXCL))) { - mode = nd->intent.open.create_mode & - ~current_umask(); rc = cifs_posix_open(full_path, &newInode, - parent_dir_inode->i_sb, mode, + parent_dir_inode->i_sb, + nd->intent.open.create_mode, nd->intent.open.flags, &oplock, &fileHandle, xid); /* @@ -681,6 +679,8 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, */ if ((rc != -EINVAL) && (rc != -EOPNOTSUPP)) posix_open = true; + else + pTcon->broken_posix_open = true; } } if (!posix_open) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 38c06f826575..302ea15f02e6 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -130,10 +130,6 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode, struct cifsFileInfo *pCifsFile, int oplock, u16 netfid) { - file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); - if (file->private_data == NULL) - return -ENOMEM; - pCifsFile = cifs_init_private(file->private_data, inode, file, netfid); write_lock(&GlobalSMBSeslock); pCifsInode = CIFS_I(file->f_path.dentry->d_inode); @@ -184,6 +180,38 @@ psx_client_can_cache: return 0; } +static struct cifsFileInfo * +cifs_fill_filedata(struct file *file) +{ + struct list_head *tmp; + struct cifsFileInfo *pCifsFile = NULL; + struct cifsInodeInfo *pCifsInode = NULL; + + /* search inode for this file and fill in file->private_data */ + pCifsInode = CIFS_I(file->f_path.dentry->d_inode); + read_lock(&GlobalSMBSeslock); + list_for_each(tmp, &pCifsInode->openFileList) { + pCifsFile = list_entry(tmp, struct cifsFileInfo, flist); + if ((pCifsFile->pfile == NULL) && + (pCifsFile->pid == current->tgid)) { + /* mode set in cifs_create */ + + /* needed for writepage */ + pCifsFile->pfile = file; + file->private_data = pCifsFile; + break; + } + } + read_unlock(&GlobalSMBSeslock); + + if (file->private_data != NULL) { + return pCifsFile; + } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL)) + cERROR(1, ("could not find file instance for " + "new file %p", file)); + return NULL; +} + /* all arguments to this function must be checked for validity in caller */ static inline int cifs_open_inode_helper(struct inode *inode, struct file *file, struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile, @@ -258,7 +286,6 @@ int cifs_open(struct inode *inode, struct file *file) struct cifsTconInfo *tcon; struct cifsFileInfo *pCifsFile; struct cifsInodeInfo *pCifsInode; - struct list_head *tmp; char *full_path = NULL; int desiredAccess; int disposition; @@ -270,32 +297,12 @@ int cifs_open(struct inode *inode, struct file *file) cifs_sb = CIFS_SB(inode->i_sb); tcon = cifs_sb->tcon; - /* search inode for this file and fill in file->private_data */ pCifsInode = CIFS_I(file->f_path.dentry->d_inode); - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &pCifsInode->openFileList) { - pCifsFile = list_entry(tmp, struct cifsFileInfo, - flist); - if ((pCifsFile->pfile == NULL) && - (pCifsFile->pid == current->tgid)) { - /* mode set in cifs_create */ - - /* needed for writepage */ - pCifsFile->pfile = file; - - file->private_data = pCifsFile; - break; - } - } - read_unlock(&GlobalSMBSeslock); - - if (file->private_data != NULL) { - rc = 0; + pCifsFile = cifs_fill_filedata(file); + if (pCifsFile) { FreeXid(xid); - return rc; - } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL)) - cERROR(1, ("could not find file instance for " - "new file %p", file)); + return 0; + } full_path = build_path_from_dentry(file->f_path.dentry); if (full_path == NULL) { @@ -325,6 +332,7 @@ int cifs_open(struct inode *inode, struct file *file) /* no need for special case handling of setting mode on read only files needed here */ + pCifsFile = cifs_fill_filedata(file); cifs_posix_open_inode_helper(inode, file, pCifsInode, pCifsFile, oplock, netfid); goto out; From 37869fa2da1a952ed736858f8b9e45c0b9131ae9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 20 May 2009 14:30:06 +0000 Subject: [PATCH 411/670] sh: ap325 camera without i2c driver fix This patch fixes the ap325rxa ncm03j camera code to handle the case where no i2c driver is present. Without this fix i2c_transfer() may be passed NULL as adapter which results in a crash. Triggered when i2c-sh_mobile.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/board-ap325rxa.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 39e46919df14..f2a29641b6a3 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -263,6 +263,9 @@ static int camera_probe(void) struct i2c_msg msg; int ret; + if (!a) + return -ENODEV; + camera_power(1); msg.addr = 0x6e; msg.buf = camera_ncm03j_magic; From 8e9bb19ef97d6594e735bee64b6d72103e350854 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 20 May 2009 14:34:43 +0000 Subject: [PATCH 412/670] video: stop sh_mobile_lcdcfb only if started This patch fixes the LCDC driver to avoid calling the function sh_mobile_lcdc_start_stop(priv, 0) unless the same function has been called before to start the LCDC hardware. Triggered when sh_mobile_lcdcfb.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/video/sh_mobile_lcdcfb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 92ea0ab44ce2..f10d2fbeda06 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -47,6 +47,7 @@ struct sh_mobile_lcdc_priv { #endif unsigned long lddckr; struct sh_mobile_lcdc_chan ch[2]; + int started; }; /* shared registers */ @@ -451,6 +452,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* start the lcdc */ sh_mobile_lcdc_start_stop(priv, 1); + priv->started = 1; /* tell the board code to enable the panel */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { @@ -493,7 +495,10 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) } /* stop the lcdc */ - sh_mobile_lcdc_start_stop(priv, 0); + if (priv->started) { + sh_mobile_lcdc_start_stop(priv, 0); + priv->started = 0; + } /* stop clocks */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) From 6eb0ac03899a1363ba176abe0830a9e6698c0503 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 21 May 2009 19:10:23 +0000 Subject: [PATCH 413/670] powerpc/maple: Add a quirk to disable MSI for IPR on Bimini Something in the HW or FW setup is busted and MSIs aren't working with IPR on Bimini, so until we figure out exaxtly what's up, we quirk them out Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/maple/pci.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 301855263b81..04296ffff8bf 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -592,3 +592,17 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) } return irq; } + +static void __devinit quirk_ipr_msi(struct pci_dev *dev) +{ + /* Something prevents MSIs from the IPR from working on Bimini, + * and the driver has no smarts to recover. So disable MSI + * on it for now. */ + + if (machine_is(maple)) { + dev->no_msi = 1; + dev_info(&dev->dev, "Quirk disabled MSI\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, + quirk_ipr_msi); From 87488957a68293357a94c8142de7d0ae17914912 Mon Sep 17 00:00:00 2001 From: Adam Williamson Date: Thu, 21 May 2009 18:32:59 -0400 Subject: [PATCH 414/670] ALSA: hda - fix audio on HP TX25xx series notebooks Fixes https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4121 Taken from https://bugzilla.redhat.com/show_bug.cgi?id=498060 Signed-off-by: Adam Williamson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b8a0d3e79272..bcbb736f94f0 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12058,6 +12058,7 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL), SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL), SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA), + SND_PCI_QUIRK(0x103c, 0x30f1, "HP TX25xx series", ALC268_TOSHIBA), SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST), SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA), SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA), From 88dff4936c0a5fa53080cca68dc963a8a2a674b0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 22 May 2009 11:35:50 +0800 Subject: [PATCH 415/670] x86: DMI match for the Sony VGN-Z540N as it needs BIOS reboot x86: DMI match for the Sony VGN-Z540N as it needs BIOS reboot, see: http://bugzilla.kernel.org/show_bug.cgi?id=12901 [ Impact: fix hung reboot on certain systems ] Signed-off-by: Zhang Rui Cc: Len Brown LKML-Reference: <1242963350.32574.53.camel@rzhang-dt> Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 1340dad417f4..667188e0b5a0 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -232,6 +232,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"), }, }, + { /* Handle problems with rebooting on Sony VGN-Z540N */ + .callback = set_bios_reboot, + .ident = "Sony VGN-Z540N", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"), + }, + }, { } }; From e069c0cf7c169ae5a8bfdc8d083a5d66fbef73d8 Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 15:51:44 -0700 Subject: [PATCH 416/670] wimax/i2400m: usb: fix device reset on autosuspend while not yet idle When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is rejected (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/usb.c | 35 +++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index ca4151a9e222..17851321b7fd 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -505,27 +505,52 @@ int i2400mu_suspend(struct usb_interface *iface, pm_message_t pm_msg) #ifdef CONFIG_PM struct usb_device *usb_dev = i2400mu->usb_dev; #endif + unsigned is_autosuspend = 0; struct i2400m *i2400m = &i2400mu->i2400m; +#ifdef CONFIG_PM + if (usb_dev->auto_pm > 0) + is_autosuspend = 1; +#endif + d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event); if (i2400m->updown == 0) goto no_firmware; - d_printf(1, dev, "fw up, requesting standby\n"); + if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) { + /* ugh -- the device is connected and this suspend + * request is an autosuspend one (not a system standby + * / hibernate). + * + * The only way the device can go to standby is if the + * link with the base station is in IDLE mode; that + * were the case, we'd be in status + * I2400M_SS_CONNECTED_IDLE. But we are not. + * + * If we *tell* him to go power save now, it'll reset + * as a precautionary measure, so if this is an + * autosuspend thing, say no and it'll come back + * later, when the link is IDLE + */ + result = -EBADF; + d_printf(1, dev, "fw up, link up, not-idle, autosuspend: " + "not entering powersave\n"); + goto error_not_now; + } + d_printf(1, dev, "fw up: entering powersave\n"); atomic_dec(&i2400mu->do_autopm); result = i2400m_cmd_enter_powersave(i2400m); atomic_inc(&i2400mu->do_autopm); -#ifdef CONFIG_PM - if (result < 0 && usb_dev->auto_pm == 0) { + if (result < 0 && !is_autosuspend) { /* System suspend, can't fail */ dev_err(dev, "failed to suspend, will reset on resume\n"); result = 0; } -#endif if (result < 0) goto error_enter_powersave; i2400mu_notification_release(i2400mu); - d_printf(1, dev, "fw up, got standby\n"); + d_printf(1, dev, "powersave requested\n"); error_enter_powersave: +error_not_now: no_firmware: d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n", iface, pm_msg.event, result); From 0899d6349c60e4021224b51c8c97f49b829dfefd Mon Sep 17 00:00:00 2001 From: Li Yang Date: Fri, 22 May 2009 16:39:59 +0800 Subject: [PATCH 417/670] fsldma: update mailling list address in MAINTAINERS linuxppc-embedded has been merged into linuxppc-dev. Signed-off-by: Li Yang --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2b349ba4add4..cac3e3b71d35 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2241,7 +2241,7 @@ P: Li Yang M: leoli@freescale.com P: Zhang Wei M: zw@zh-kernel.org -L: linuxppc-embedded@ozlabs.org +L: linuxppc-dev@ozlabs.org L: linux-kernel@vger.kernel.org S: Maintained F: drivers/dma/fsldma.* From f47edc6dab11801c2e97088ba7bbce042ded867c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 22 May 2009 16:46:52 +0800 Subject: [PATCH 418/670] fsldma: fix check on potential fdev->chan[] overflow Fix the check of potential array overflow when using corrupted channel device tree nodes. Signed-off-by: Roel Kluin Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index da8a8ed9e411..391b1bd7098b 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -830,7 +830,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1); new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7; - if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) { + if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) { dev_err(fdev->dev, "There is no %d channel!\n", new_fsl_chan->id); err = -EINVAL; From 138ef0185177a6d221d24b6aa8f12d867fbbef90 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Tue, 19 May 2009 15:42:13 -0700 Subject: [PATCH 419/670] fsldma: fix "DMA halt timeout!" errors When using the DMA controller from multiple threads at the same time, it is possible to get lots of "DMA halt timeout!" errors printed to the kernel log. This occurs due to a race between fsl_dma_memcpy_issue_pending() and the interrupt handler, fsl_dma_chan_do_interrupt(). Both call the fsl_chan_xfer_ld_queue() function, which does not protect against concurrent accesses to dma_halt() and dma_start(). The existing spinlock is moved to cover the dma_halt() and dma_start() functions. Testing shows that the "DMA halt timeout!" errors disappear. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 391b1bd7098b..a4151c3bb78b 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -598,15 +598,16 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) dma_addr_t next_dest_addr; unsigned long flags; + spin_lock_irqsave(&fsl_chan->desc_lock, flags); + if (!dma_is_idle(fsl_chan)) - return; + goto out_unlock; dma_halt(fsl_chan); /* If there are some link descriptors * not transfered in queue. We need to start it. */ - spin_lock_irqsave(&fsl_chan->desc_lock, flags); /* Find the first un-transfer desciptor */ for (ld_node = fsl_chan->ld_queue.next; @@ -617,8 +618,6 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) fsl_chan->common.cookie) == DMA_SUCCESS); ld_node = ld_node->next); - spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); - if (ld_node != &fsl_chan->ld_queue) { /* Get the ld start address from ld_queue */ next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys; @@ -630,6 +629,9 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) set_cdar(fsl_chan, 0); set_ndar(fsl_chan, 0); } + +out_unlock: + spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); } /** From bcfb7465c03a8c62c89da374677df56f6b894d44 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 14:27:16 -0700 Subject: [PATCH 420/670] fsldma: fix infinite loop on multi-descriptor DMA chain completion When creating a DMA transaction with multiple descriptors, the async_tx cookie is set to 0 for each descriptor in the chain, excluding the last descriptor, whose cookie is set to -EBUSY. When fsl_dma_tx_submit() is run, it only assigns a cookie to the first descriptor. All of the remaining descriptors keep their original value, including the last descriptor, which is set to -EBUSY. After the DMA completes, the driver will update the last completed cookie to be -EBUSY, which is an error code instead of a valid cookie. This causes dma_async_is_complete() to always return DMA_IN_PROGRESS. This causes the fsldma driver to never cleanup the queue of link descriptors, and the driver will re-run the DMA transaction on the hardware each time it receives the End-of-Chain interrupt. This causes an infinite loop. With this patch, fsl_dma_tx_submit() is changed to assign a cookie to every descriptor in the chain. The rest of the code then works without problems. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index a4151c3bb78b..7313a1ae5f83 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -313,8 +313,8 @@ static void fsl_chan_toggle_ext_start(struct fsl_dma_chan *fsl_chan, int enable) static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) { - struct fsl_desc_sw *desc = tx_to_fsl_desc(tx); struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan); + struct fsl_desc_sw *desc; unsigned long flags; dma_cookie_t cookie; @@ -322,14 +322,17 @@ static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx) spin_lock_irqsave(&fsl_chan->desc_lock, flags); cookie = fsl_chan->common.cookie; - cookie++; - if (cookie < 0) - cookie = 1; - desc->async_tx.cookie = cookie; - fsl_chan->common.cookie = desc->async_tx.cookie; + list_for_each_entry(desc, &tx->tx_list, node) { + cookie++; + if (cookie < 0) + cookie = 1; - append_ld_queue(fsl_chan, desc); - list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev); + desc->async_tx.cookie = cookie; + } + + fsl_chan->common.cookie = cookie; + append_ld_queue(fsl_chan, tx_to_fsl_desc(tx)); + list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev); spin_unlock_irqrestore(&fsl_chan->desc_lock, flags); From 776c8943f2766f2819fafd88fdfbaf418ecd6e41 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 11:33:20 -0700 Subject: [PATCH 421/670] fsldma: snooping is not enabled for last entry in descriptor chain On the 83xx controller, snooping is necessary for the DMA controller to ensure cache coherence with the CPU when transferring to/from RAM. The last descriptor in a chain will always have the End-of-Chain interrupt bit set, so we can set the snoop bit while adding the End-of-Chain interrupt bit. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 7313a1ae5f83..ff9194d7ebb7 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -179,9 +179,14 @@ static void dma_halt(struct fsl_dma_chan *fsl_chan) static void set_ld_eol(struct fsl_dma_chan *fsl_chan, struct fsl_desc_sw *desc) { + u64 snoop_bits; + + snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX) + ? FSL_DMA_SNEN : 0; + desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan, - DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL, - 64); + DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL + | snoop_bits, 64); } static void append_ld_queue(struct fsl_dma_chan *fsl_chan, From 2e077f8e8337e52eef3c39c24c31e103b11a0326 Mon Sep 17 00:00:00 2001 From: Ira Snyder Date: Fri, 15 May 2009 09:59:46 -0700 Subject: [PATCH 422/670] fsldma: fix memory leak on error path in fsl_dma_prep_memcpy() When preparing a memcpy operation, if the kernel fails to allocate memory for a link descriptor after the first link descriptor has already been allocated, then some memory will never be released. Fix the problem by walking the list of allocated descriptors backwards, and freeing the allocated descriptors back into the DMA pool. Signed-off-by: Ira W. Snyder Signed-off-by: Li Yang --- drivers/dma/fsldma.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index ff9194d7ebb7..15783102bf17 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -462,8 +462,8 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( { struct fsl_dma_chan *fsl_chan; struct fsl_desc_sw *first = NULL, *prev = NULL, *new; + struct list_head *list; size_t copy; - LIST_HEAD(link_chain); if (!chan) return NULL; @@ -480,7 +480,7 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( if (!new) { dev_err(fsl_chan->dev, "No free memory for link descriptor\n"); - return NULL; + goto fail; } #ifdef FSL_DMA_LD_DEBUG dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new); @@ -515,7 +515,19 @@ static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy( /* Set End-of-link to the last link descriptor of new list*/ set_ld_eol(fsl_chan, new); - return first ? &first->async_tx : NULL; + return &first->async_tx; + +fail: + if (!first) + return NULL; + + list = &first->async_tx.tx_list; + list_for_each_entry_safe_reverse(new, prev, list, node) { + list_del(&new->node); + dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys); + } + + return NULL; } /** From 0e1b74df992c1ef92213ab26f952befda2087f59 Mon Sep 17 00:00:00 2001 From: Mingwei Wang Date: Wed, 20 May 2009 16:49:57 +0800 Subject: [PATCH 423/670] [ARM] pxa: fix the incorrectly defined drive strength macros for pxa{168,910} Signed-off-by: Mingwei Wang Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/mfp-pxa168.h | 5 +++++ arch/arm/mach-mmp/include/mach/mfp-pxa910.h | 5 +++++ arch/arm/mach-mmp/include/mach/mfp.h | 9 +++------ 3 files changed, 13 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index d0bdb6e3682b..2e914649b9e4 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -3,6 +3,11 @@ #include +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x1 << 13) +#define MFP_DRIVE_MEDIUM (0x2 << 13) +#define MFP_DRIVE_FAST (0x3 << 13) + /* GPIO */ #define GPIO0_GPIO MFP_CFG(GPIO0, AF5) #define GPIO1_GPIO MFP_CFG(GPIO1, AF5) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index 48a1cbc7c56b..d97de36c50ad 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -3,6 +3,11 @@ #include +#define MFP_DRIVE_VERY_SLOW (0x0 << 13) +#define MFP_DRIVE_SLOW (0x2 << 13) +#define MFP_DRIVE_MEDIUM (0x4 << 13) +#define MFP_DRIVE_FAST (0x8 << 13) + /* UART2 */ #define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6) #define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6) diff --git a/arch/arm/mach-mmp/include/mach/mfp.h b/arch/arm/mach-mmp/include/mach/mfp.h index 277ea4cd0f9f..62e510e80a58 100644 --- a/arch/arm/mach-mmp/include/mach/mfp.h +++ b/arch/arm/mach-mmp/include/mach/mfp.h @@ -12,16 +12,13 @@ * possible, we make the following compromise: * * 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT) - * 2. DRIVE strength definitions redefined to include the reserved bit10 + * 2. DRIVE strength definitions redefined to include the reserved bit + * - the reserved bit differs between pxa168 and pxa910, and the + * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h * 3. Override MFP_CFG() and MFP_CFG_DRV() * 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X() */ -#define MFP_DRIVE_VERY_SLOW (0x0 << 13) -#define MFP_DRIVE_SLOW (0x2 << 13) -#define MFP_DRIVE_MEDIUM (0x4 << 13) -#define MFP_DRIVE_FAST (0x8 << 13) - #undef MFP_CFG #undef MFP_CFG_DRV #undef MFP_CFG_LPM From f5c81a327015844eb91087dd102648b5d984f33c Mon Sep 17 00:00:00 2001 From: Coly Li Date: Thu, 23 Apr 2009 03:04:45 +0800 Subject: [PATCH 424/670] [ARM] pxa: add parameter to clksrc_read() for pxa168/910 This patch modifies parameter of clksrc_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li Cc: Thomas Gleixner Signed-off-by: Eric Miao --- arch/arm/mach-mmp/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index b03a6eda7419..a8400bb891e7 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -136,7 +136,7 @@ static struct clock_event_device ckevt = { .set_mode = timer_set_mode, }; -static cycle_t clksrc_read(void) +static cycle_t clksrc_read(struct clocksource *cs) { return timer_read(); } From 6ec04f434d29aed33608e0ca4d8b100190e71e96 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 22 May 2009 01:39:10 +0200 Subject: [PATCH 425/670] [ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmld.c | 2 ++ arch/arm/mach-pxa/palmt5.c | 1 + arch/arm/mach-pxa/palmtx.c | 1 + 3 files changed, 4 insertions(+) diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 1cec1806f002..471a853e548b 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, + GPIO95_AC97_nRESET, /* IrDA */ GPIO108_GPIO, /* ir disable */ diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 30662363907b..05bf979b78a6 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index e2d44b1a8a9b..e99a893c58a7 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + GPIO89_AC97_SYSCLK, GPIO95_AC97_nRESET, /* IrDA */ From d5046853634a8d73f28bad3cf68d182c4a99035d Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 22 May 2009 20:36:21 +0900 Subject: [PATCH 426/670] nilfs2: fix memory leak in nilfs_ioctl_clean_segments This fixes a new memory leak problem in garbage collection. The problem was brought by the bugfix patch ("nilfs2: fix lock order reversal in nilfs_clean_segments ioctl"). Thanks to Kentaro Suzuki for finding this problem. Reported-by: Kentaro Suzuki Signed-off-by: Ryusuke Konishi --- fs/nilfs2/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 50ff3f2cdf24..d6759b92006f 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -576,7 +576,7 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp, ret = nilfs_clean_segments(inode->i_sb, argv, kbufs); out_free: - while (--n > 0) + while (--n >= 0) vfree(kbufs[n]); kfree(kbufs[4]); return ret; From 63d3892379f93b73ef905fb3449f4e4438a53b40 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 21 May 2009 05:50:01 +0800 Subject: [PATCH 427/670] MIPS: Fix sparse warning in incompatiable argument type of clear_user. The type of the second argument of access_ok should be (void __user *). The unnecessary conversion of the clear_user address argument was causing sparse to emit warnings on the __chk_user_ptr check. Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 8de858f5449f..c2d53c18fd36 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -956,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size) void __user * __cl_addr = (addr); \ unsigned long __cl_size = (n); \ if (__cl_size && access_ok(VERIFY_WRITE, \ - ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_addr, __cl_size)) \ __cl_size = __clear_user(__cl_addr, __cl_size); \ __cl_size; \ }) From 63c901c7e6fb878805cd2f8f14fa3eee8c03ee84 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 22 May 2009 10:48:17 +0100 Subject: [PATCH 428/670] MIPS: IP32: Fix build error due to uninitialized variable. CC arch/mips/sgi-ip32/ip32-reset.o cc1: warnings being treated as errors arch/mips/sgi-ip32/ip32-reset.c: In function 'debounce': arch/mips/sgi-ip32/ip32-reset.c:97: error: 'reg_a' is used uninitialized in this function The issues is old but due to the volatile keyword gcc older than 4.4 did not warn about this obvious bug. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index 667da932b7b2..cc549a9a99e8 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -94,6 +94,7 @@ static void debounce(unsigned long data) volatile unsigned char reg_a, reg_c, xctrl_a; reg_c = CMOS_READ(RTC_INTR_FLAGS); + reg_a = CMOS_READ(RTC_REG_A); CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A); wbflush(); xctrl_a = CMOS_READ(DS_B1_XCTRL4A); From d2f82c2f70d56ba4623de25edb383fec01f43b89 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 22 May 2009 10:58:43 +0100 Subject: [PATCH 429/670] MIPS: IP32: Remove unnecessary if not even harmful volatile keywords. They are unneeded and as the issue fixed in lmo commit 63f7ec59053e3f850ab67a9938e631bcba64c6ce shows even harmful. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index cc549a9a99e8..9b95d80ebc6e 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void) static void ip32_machine_power_off(void) { - volatile unsigned char reg_a, xctrl_a, xctrl_b; + unsigned char reg_a, xctrl_a, xctrl_b; disable_irq(MACEISA_RTC_IRQ); reg_a = CMOS_READ(RTC_REG_A); @@ -91,7 +91,7 @@ static void blink_timeout(unsigned long data) static void debounce(unsigned long data) { - volatile unsigned char reg_a, reg_c, xctrl_a; + unsigned char reg_a, reg_c, xctrl_a; reg_c = CMOS_READ(RTC_INTR_FLAGS); reg_a = CMOS_READ(RTC_REG_A); @@ -138,7 +138,7 @@ static inline void ip32_power_button(void) static irqreturn_t ip32_rtc_int(int irq, void *dev_id) { - volatile unsigned char reg_c; + unsigned char reg_c; reg_c = CMOS_READ(RTC_INTR_FLAGS); if (!(reg_c & RTC_IRQF)) { From 8369d5fa63260cc54464b4687aa6a0f78402d98e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:36 +0200 Subject: [PATCH 430/670] ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2) Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk: commit 8588a2b732928b343233af9b1855705b8286bed4 ("ide: add SH-S202J to ivb_list[]") We also later added support for more such devices in: commit e97564f362a93f8c248246c19828895950341252 ("ide: More TSST drives with broken cable detection") and in: commit 3ced5c49bd2d1f2c7f769e3a54385883de63a652 ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]") It turns out that such devices lack cable detection altogether (which in turn results in incorrect detection of 40-wire cables by our current cable detection strategy) so always handle them by trusting host-side cable detection only. v2: Model detection fixup from Martin. Reported-and-tested-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c19a221b1e18..06fe002116ec 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); /* * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid. - * We list them here and depend on the device side cable detection for them. - * * Some optical devices with the buggy firmwares have the same problem. */ static const struct drive_list_entry ivb_list[] = { @@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive) * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ - if ((id[ATA_ID_HW_CONFIG] & 0x4000) || - (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000))) + if (id[ATA_ID_HW_CONFIG] & 0x4000) return 1; + if (ivb) { + const char *model = (char *)&id[ATA_ID_PROD]; + + if (strstr(model, "TSSTcorp CDDVDW SH-S202")) { + /* + * These ATAPI devices always report 80c cable + * so we have to depend on the host in this case. + */ + if (hwif->cbl == ATA_CBL_PATA80) + return 1; + } else { + /* Depend on the device side cable detection. */ + if (id[ATA_ID_HW_CONFIG] & 0x2000) + return 1; + } + } no_80w: if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED) return 0; From e3b29f05124b07303088795396ff858811d2acb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: [PATCH 431/670] ide: fix OOPS during ide-cd error recovery On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser Reported-and-tested-by: Modestas Vainius Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d3b2c5..6415a2e2ba87 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -696,7 +696,7 @@ void ide_timer_expiry (unsigned long data) } spin_lock_irq(&hwif->lock); enable_irq(hwif->irq); - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { ide_unlock_port(hwif); plug_device = 1; } @@ -868,7 +868,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) * same irq as is currently being serviced here, and Linux * won't allow another of the same (on any CPU) until we return. */ - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { BUG_ON(hwif->handler); ide_unlock_port(hwif); plug_device = 1; From 26bfcf21e25fa090f099fa0ccf201424989cbd7b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: [PATCH 432/670] ide: fix printk() levels in ide_dump_ata[pi]_error() Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 56ff8c46c7d1..85b9bae111f6 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -91,7 +91,7 @@ static void ide_dump_sector(ide_drive_t *drive) static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATA_ABORTED) printk(KERN_CONT "DriveStatusError "); if (err & ATA_ICRC) @@ -121,7 +121,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATAPI_ILI) printk(KERN_CONT "IllegalLengthIndication "); if (err & ATAPI_EOM) From cc30137a221372c67a943ad9ea68121a2bd57a6e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: [PATCH 433/670] ide: improve failed opcode reporting Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 85b9bae111f6..2148df836ce7 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -31,24 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } -static void ide_dump_opcode(ide_drive_t *drive) -{ - struct request *rq = drive->hwif->rq; - struct ide_cmd *cmd = NULL; - - if (!rq) - return; - - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) - cmd = rq->special; - - printk(KERN_ERR "ide: failed opcode was: "); - if (cmd == NULL) - printk(KERN_CONT "unknown\n"); - else - printk(KERN_CONT "0x%02x\n", cmd->tf.command); -} - u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { struct ide_taskfile *tf = &cmd->tf; @@ -179,7 +161,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) else ide_dump_atapi_error(drive, err); } - ide_dump_opcode(drive); + + printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n", + drive->name, drive->hwif->cmd.tf.command); + return err; } EXPORT_SYMBOL(ide_dump_status); From 28ee9bc5cc42776e0364399b401a64906ac1ac8e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: [PATCH 434/670] ide: report timeouts in ide_busy_sleep() * change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 9 ++++++--- include/linux/ide.h | 2 +- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 7f264ed1141b..c895ed52b2e8 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -295,7 +295,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - if (ide_busy_sleep(hwif, timeout, use_altstatus)) + if (ide_busy_sleep(drive, timeout, use_altstatus)) return 1; /* wait for IRQ and ATA_DRQ */ @@ -316,8 +316,9 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) return rc; } -int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) +int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus) { + ide_hwif_t *hwif = drive->hwif; u8 stat; timeout += jiffies; @@ -330,6 +331,8 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) return 0; } while (time_before(jiffies, timeout)); + printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__); + return 1; /* drive timed-out */ } @@ -420,7 +423,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) tp_ops->dev_select(drive); msleep(50); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0); + (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0); rc = ide_dev_read_id(drive, cmd, id); } diff --git a/include/linux/ide.h b/include/linux/ide.h index ff65fffb078f..9fed365a598b 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1109,7 +1109,7 @@ void ide_fix_driveid(u16 *); extern void ide_fixstring(u8 *, const int, const int); -int ide_busy_sleep(ide_hwif_t *, unsigned long, int); +int ide_busy_sleep(ide_drive_t *, unsigned long, int); int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); From 5993856e53fbc4b4f28e2d481deaebeb715b1267 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Fri, 22 May 2009 16:23:39 +0200 Subject: [PATCH 435/670] via82cxxx: Add VIA VX855 PCI Device ID This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte Cc: Joseph Chan Cc: Bruce Chang Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/via82cxxx.c | 2 ++ include/linux/pci_ids.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 3ff7231e4858..028de26a25fe 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -67,6 +67,7 @@ static struct via_isa_bridge { u8 udma_mask; u8 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -474,6 +475,7 @@ static const struct pci_device_id via_pci_tbl[] = { { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, { 0, }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 06ba90c211a5..0f71812d67d3 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1406,7 +1406,7 @@ #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 #define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 -#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409 +#define PCI_DEVICE_ID_VIA_VX855_IDE 0xC409 #define PCI_DEVICE_ID_VIA_ANON 0xFFFF #define PCI_VENDOR_ID_SIEMENS 0x110A From 9a2845c453d170e4e9b1437fa671dbf39b0e7bd8 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 20 May 2009 13:36:17 -0500 Subject: [PATCH 436/670] ipmi: fix ipmi_si modprobe hang Instead of queuing IPMB messages before channel initialization, just throw them away. Nobody will be listening for them at this point, anyway, and they will clog up the queue and nothing will be delivered if we queue them. Also set the current channel to the number of channels, as this value is used to tell if the channel information has been initialized. Signed-off-by: Corey Minyard Cc: Ferenc Wagner Cc: Dan Frazier Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index aa83a0865ec1..09050797c76a 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2856,6 +2856,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, /* Assume a single IPMB channel at zero. */ intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB; + intf->curr_channel = IPMI_MAX_CHANNELS; } if (rv == 0) @@ -3648,13 +3649,13 @@ static int handle_new_recv_msg(ipmi_smi_t intf, } /* - ** We need to make sure the channels have been initialized. - ** The channel_handler routine will set the "curr_channel" - ** equal to or greater than IPMI_MAX_CHANNELS when all the - ** channels for this interface have been initialized. - */ + * We need to make sure the channels have been initialized. + * The channel_handler routine will set the "curr_channel" + * equal to or greater than IPMI_MAX_CHANNELS when all the + * channels for this interface have been initialized. + */ if (intf->curr_channel < IPMI_MAX_CHANNELS) { - requeue = 1; /* Just put the message back for now */ + requeue = 0; /* Throw the message away */ goto out; } From afe6d7e3c4a9aba020637f4ae15527a89ba31f21 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Fri, 22 May 2009 17:48:58 +0200 Subject: [PATCH 437/670] ALSA: Kill truncate warning by shortening Sigmatel-specific AC97 control name ALSA sound/core/control.c:232: Control name 'Sigmatel Surround Phase Inversion Playback Switch' truncated to 'Sigmatel Surround Phase Inversion Playback ' bootup message by omitting weird Sigmatel prefix in this case; also fix up the related ca0106 mixer control removal part by using identical naming there. Signed-off-by: Andreas Mohr Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_patch.c | 7 +++++-- sound/pci/ca0106/ca0106_mixer.c | 2 +- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 81bc93e5f1e3..7337abdbe4e3 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -958,10 +958,13 @@ static int patch_sigmatel_stac9708_3d(struct snd_ac97 * ac97) } static const struct snd_kcontrol_new snd_ac97_sigmatel_4speaker = -AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch", AC97_SIGMATEL_DAC2INVERT, 2, 1, 0); +AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch", + AC97_SIGMATEL_DAC2INVERT, 2, 1, 0); +/* "Sigmatel " removed due to excessive name length: */ static const struct snd_kcontrol_new snd_ac97_sigmatel_phaseinvert = -AC97_SINGLE("Sigmatel Surround Phase Inversion Playback Switch", AC97_SIGMATEL_DAC2INVERT, 3, 1, 0); +AC97_SINGLE("Surround Phase Inversion Playback Switch", + AC97_SIGMATEL_DAC2INVERT, 3, 1, 0); static const struct snd_kcontrol_new snd_ac97_sigmatel_controls[] = { AC97_SINGLE("Sigmatel DAC 6dB Attenuate", AC97_SIGMATEL_ANALOG, 1, 1, 0), diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c index ad2888705d2a..c111efe61c3c 100644 --- a/sound/pci/ca0106/ca0106_mixer.c +++ b/sound/pci/ca0106/ca0106_mixer.c @@ -800,7 +800,7 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu) "Capture Volume", "External Amplifier", "Sigmatel 4-Speaker Stereo Playback Switch", - "Sigmatel Surround Phase Inversion Playback ", + "Surround Phase Inversion Playback Switch", NULL }; static char *ca0106_rename_ctls[] = { From bca23dba760d6705c013f89113c46570378fb626 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Thu, 21 May 2009 11:46:16 -0700 Subject: [PATCH 438/670] x86, setup: revert ACPI 3 E820 extended attributes support Remove ACPI 3 E820 extended memory attributes support. At least one vendor actively set all the flags to zero, but left ECX on return at 24. This bug may be present in other BIOSes. The breakage functionally means the ACPI 3 flags are probably completely useless, and that no OS any time soon is going to rely on their existence. Therefore, drop support completely. We may want to revisit this question in the future, if we find ourselves actually needing the flags. This reverts all or part of the following checkins: cd670599b7b00d9263f6f11a05c0edeb9cbedaf3 c549e71d073a6e9a4847497344db28a784061455 However, retain the part from the latter commit that copies e820 into a temporary buffer; that is an unrelated BIOS workaround. Put in a comment to explain that part. See https://bugzilla.redhat.com/show_bug.cgi?id=499396 for some additional information. [ Impact: detect all memory on affected machines ] Reported-by: Thomas J. Baker Signed-off-by: H. Peter Anvin Acked-by: Len Brown Cc: Chuck Ebbert Cc: Kyle McMartin Cc: Matt Domsch --- arch/x86/boot/memory.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c index 5054c2ddd1a0..74b3d2ba84e9 100644 --- a/arch/x86/boot/memory.c +++ b/arch/x86/boot/memory.c @@ -17,11 +17,6 @@ #define SMAP 0x534d4150 /* ASCII "SMAP" */ -struct e820_ext_entry { - struct e820entry std; - u32 ext_flags; -} __attribute__((packed)); - static int detect_memory_e820(void) { int count = 0; @@ -29,13 +24,21 @@ static int detect_memory_e820(void) u32 size, id, edi; u8 err; struct e820entry *desc = boot_params.e820_map; - static struct e820_ext_entry buf; /* static so it is zeroed */ + static struct e820entry buf; /* static so it is zeroed */ /* - * Set this here so that if the BIOS doesn't change this field - * but still doesn't change %ecx, we're still okay... + * Note: at least one BIOS is known which assumes that the + * buffer pointed to by one e820 call is the same one as + * the previous call, and only changes modified fields. Therefore, + * we use a temporary buffer and copy the results entry by entry. + * + * This routine deliberately does not try to account for + * ACPI 3+ extended attributes. This is because there are + * BIOSes in the field which report zero for the valid bit for + * all ranges, and we don't currently make any use of the + * other attribute bits. Revisit this if we see the extended + * attribute bits deployed in a meaningful way in the future. */ - buf.ext_flags = 1; do { size = sizeof buf; @@ -66,13 +69,7 @@ static int detect_memory_e820(void) break; } - /* ACPI 3.0 added the extended flags support. If bit 0 - in the extended flags is zero, we're supposed to simply - ignore the entry -- a backwards incompatible change! */ - if (size > 20 && !(buf.ext_flags & 1)) - continue; - - *desc++ = buf.std; + *desc++ = buf; count++; } while (next && count < ARRAY_SIZE(boot_params.e820_map)); From 14b60391587ab9b2207c4fb6281763a93ae85e0f Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 20 May 2009 16:47:08 -0400 Subject: [PATCH 439/670] i915: support 8xx desktop cursors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For some reason we never added 8xx desktop cursor support to the kernel. This patch fixes that. [krh: Also set the size on pre-i915 hw.] Tested-by: Kristian Høgsberg Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 4 ++-- drivers/gpu/drm/i915/i915_reg.h | 17 +++++++++++++++++ drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++------ 3 files changed, 39 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 4a24c90fb940..717b6a854bcd 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1145,7 +1145,7 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } - list_add(&obj_priv->list, &dev_priv->mm.inactive_list); + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } /* Need a new fence register? */ @@ -1375,7 +1375,7 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, mutex_unlock(&dev->struct_mutex); return ret; } - list_add(&obj_priv->list, &dev_priv->mm.inactive_list); + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } drm_gem_object_unreference(obj); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 15da44cf21b1..9668cc0d7f4e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1410,9 +1410,25 @@ /* Cursor A & B regs */ #define CURACNTR 0x70080 +/* Old style CUR*CNTR flags (desktop 8xx) */ +#define CURSOR_ENABLE 0x80000000 +#define CURSOR_GAMMA_ENABLE 0x40000000 +#define CURSOR_STRIDE_MASK 0x30000000 +#define CURSOR_FORMAT_SHIFT 24 +#define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT) +#define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT) +/* New style CUR*CNTR flags */ +#define CURSOR_MODE 0x27 #define CURSOR_MODE_DISABLE 0x00 #define CURSOR_MODE_64_32B_AX 0x07 #define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) +#define MCURSOR_PIPE_SELECT (1 << 28) +#define MCURSOR_PIPE_A 0x00 +#define MCURSOR_PIPE_B (1 << 28) #define MCURSOR_GAMMA_ENABLE (1 << 26) #define CURABASE 0x70084 #define CURAPOS 0x70088 @@ -1420,6 +1436,7 @@ #define CURSOR_POS_SIGN 0x8000 #define CURSOR_X_SHIFT 0 #define CURSOR_Y_SHIFT 16 +#define CURSIZE 0x700a0 #define CURBCNTR 0x700c0 #define CURBBASE 0x700c4 #define CURBPOS 0x700c8 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3387cf32f385..c9d6f10ba92e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1357,7 +1357,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, int pipe = intel_crtc->pipe; uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR; uint32_t base = (pipe == 0) ? CURABASE : CURBBASE; - uint32_t temp; + uint32_t temp = I915_READ(control); size_t addr; int ret; @@ -1366,7 +1366,12 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, /* if we want to turn off the cursor ignore width and height */ if (!handle) { DRM_DEBUG("cursor off\n"); - temp = CURSOR_MODE_DISABLE; + if (IS_MOBILE(dev) || IS_I9XX(dev)) { + temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); + temp |= CURSOR_MODE_DISABLE; + } else { + temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); + } addr = 0; bo = NULL; mutex_lock(&dev->struct_mutex); @@ -1409,10 +1414,19 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, addr = obj_priv->phys_obj->handle->busaddr; } - temp = 0; - /* set the pipe for the cursor */ - temp |= (pipe << 28); - temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + if (!IS_I9XX(dev)) + I915_WRITE(CURSIZE, (height << 12) | width); + + /* Hooray for CUR*CNTR differences */ + if (IS_MOBILE(dev) || IS_I9XX(dev)) { + temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); + temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; + temp |= (pipe << 28); /* Connect to correct pipe */ + } else { + temp &= ~(CURSOR_FORMAT_MASK); + temp |= CURSOR_ENABLE; + temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE; + } finish: I915_WRITE(control, temp); From 8863170628da4b0b461eb96bf797df1dca0bd03e Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 11:19:55 +0800 Subject: [PATCH 440/670] drm/i915: Fetch SDVO LVDS mode lines from VBT, then reserve them Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 3 +- drivers/gpu/drm/i915/intel_bios.c | 104 +++++++++++++++++++++--------- drivers/gpu/drm/i915/intel_bios.h | 17 +++++ drivers/gpu/drm/i915/intel_lvds.c | 4 +- 4 files changed, 94 insertions(+), 34 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 9b149fe824c3..c431fa54bbb5 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -180,7 +180,8 @@ typedef struct drm_i915_private { int backlight_duty_cycle; /* restore backlight to this value */ bool panel_wants_dither; struct drm_display_mode *panel_fixed_mode; - struct drm_display_mode *vbt_mode; /* if any */ + struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */ + struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */ /* Feature bits from the VBIOS */ unsigned int int_tv_support:1; diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index fc28e2bbd542..9d78cff33b24 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -57,9 +57,43 @@ find_section(struct bdb_header *bdb, int section_id) return NULL; } -/* Try to find panel data */ static void -parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) +fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode, + struct lvds_dvo_timing *dvo_timing) +{ + panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | + dvo_timing->hactive_lo; + panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + + ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); + panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + + dvo_timing->hsync_pulse_width; + panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + + ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + + panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | + dvo_timing->vactive_lo; + panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + + dvo_timing->vsync_off; + panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + + dvo_timing->vsync_pulse_width; + panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + + ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); + panel_fixed_mode->clock = dvo_timing->clock * 10; + panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; + + /* Some VBTs have bogus h/vtotal values */ + if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) + panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; + if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) + panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; + + drm_mode_set_name(panel_fixed_mode); +} + +/* Try to find integrated panel data */ +static void +parse_lfp_panel_data(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) { struct bdb_lvds_options *lvds_options; struct bdb_lvds_lfp_data *lvds_lfp_data; @@ -91,35 +125,9 @@ parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode), DRM_MEM_DRIVER); - panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) | - dvo_timing->hactive_lo; - panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay + - ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo); - panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start + - dvo_timing->hsync_pulse_width; - panel_fixed_mode->htotal = panel_fixed_mode->hdisplay + - ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo); + fill_detail_timing_data(panel_fixed_mode, dvo_timing); - panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) | - dvo_timing->vactive_lo; - panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay + - dvo_timing->vsync_off; - panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start + - dvo_timing->vsync_pulse_width; - panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay + - ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo); - panel_fixed_mode->clock = dvo_timing->clock * 10; - panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED; - - /* Some VBTs have bogus h/vtotal values */ - if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal) - panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1; - if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal) - panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1; - - drm_mode_set_name(panel_fixed_mode); - - dev_priv->vbt_mode = panel_fixed_mode; + dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode; DRM_DEBUG("Found panel mode in BIOS VBT tables:\n"); drm_mode_debug_printmodeline(panel_fixed_mode); @@ -127,6 +135,39 @@ parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb) return; } +/* Try to find sdvo panel data */ +static void +parse_sdvo_panel_data(struct drm_i915_private *dev_priv, + struct bdb_header *bdb) +{ + struct bdb_sdvo_lvds_options *sdvo_lvds_options; + struct lvds_dvo_timing *dvo_timing; + struct drm_display_mode *panel_fixed_mode; + + dev_priv->sdvo_lvds_vbt_mode = NULL; + + sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS); + if (!sdvo_lvds_options) + return; + + dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS); + if (!dvo_timing) + return; + + panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode), + DRM_MEM_DRIVER); + + if (!panel_fixed_mode) + return; + + fill_detail_timing_data(panel_fixed_mode, + dvo_timing + sdvo_lvds_options->panel_type); + + dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode; + + return; +} + static void parse_general_features(struct drm_i915_private *dev_priv, struct bdb_header *bdb) @@ -199,7 +240,8 @@ intel_init_bios(struct drm_device *dev) /* Grab useful general definitions */ parse_general_features(dev_priv, bdb); - parse_panel_data(dev_priv, bdb); + parse_lfp_panel_data(dev_priv, bdb); + parse_sdvo_panel_data(dev_priv, bdb); pci_unmap_rom(pdev, bios); diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index de621aad85b5..8ca2cde15804 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -279,6 +279,23 @@ struct vch_bdb_22 { struct vch_panel_data panels[16]; } __attribute__((packed)); +struct bdb_sdvo_lvds_options { + u8 panel_backlight; + u8 h40_set_panel_type; + u8 panel_type; + u8 ssc_clk_freq; + u16 als_low_trip; + u16 als_high_trip; + u8 sclalarcoeff_tab_row_num; + u8 sclalarcoeff_tab_row_size; + u8 coefficient[8]; + u8 panel_misc_bits_1; + u8 panel_misc_bits_2; + u8 panel_misc_bits_3; + u8 panel_misc_bits_4; +} __attribute__((packed)); + + bool intel_init_bios(struct drm_device *dev); /* diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 439a86514993..53731f0ffcb5 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -511,10 +511,10 @@ void intel_lvds_init(struct drm_device *dev) } /* Failed to get EDID, what about VBT? */ - if (dev_priv->vbt_mode) { + if (dev_priv->lfp_lvds_vbt_mode) { mutex_lock(&dev->mode_config.mutex); dev_priv->panel_fixed_mode = - drm_mode_duplicate(dev, dev_priv->vbt_mode); + drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); mutex_unlock(&dev->mode_config.mutex); if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= From 7086c87fb1446ceb37918ffa0941359a7c2ec6cf Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Wed, 13 May 2009 11:20:06 +0800 Subject: [PATCH 441/670] drm/i915: Return SDVO LVDS VBT mode if no EDID modes are detected. Some new SDVO LVDS hardware doesn't have DDC available, and this should fix the display on it. Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 41 +++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 9913651c1e17..f79ebf4de63c 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -69,6 +69,10 @@ struct intel_sdvo_priv { * This is set if we treat the device as HDMI, instead of DVI. */ bool is_hdmi; + /** + * This is set if we detect output of sdvo device as LVDS. + */ + bool is_lvds; /** * Returned SDTV resolutions allowed for the current format, if the @@ -1543,6 +1547,37 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector) } } +static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) +{ + struct intel_output *intel_output = to_intel_output(connector); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + struct drm_i915_private *dev_priv = connector->dev->dev_private; + + /* + * Attempt to get the mode list from DDC. + * Assume that the preferred modes are + * arranged in priority order. + */ + /* set the bus switch and get the modes */ + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); + intel_ddc_get_modes(intel_output); + if (list_empty(&connector->probed_modes) == false) + return; + + /* Fetch modes from VBT */ + if (dev_priv->sdvo_lvds_vbt_mode != NULL) { + struct drm_display_mode *newmode; + newmode = drm_mode_duplicate(connector->dev, + dev_priv->sdvo_lvds_vbt_mode); + if (newmode != NULL) { + /* Guarantee the mode is preferred */ + newmode->type = (DRM_MODE_TYPE_PREFERRED | + DRM_MODE_TYPE_DRIVER); + drm_mode_probed_add(connector, newmode); + } + } +} + static int intel_sdvo_get_modes(struct drm_connector *connector) { struct intel_output *output = to_intel_output(connector); @@ -1550,6 +1585,8 @@ static int intel_sdvo_get_modes(struct drm_connector *connector) if (sdvo_priv->is_tv) intel_sdvo_get_tv_modes(connector); + else if (sdvo_priv->is_lvds == true) + intel_sdvo_get_lvds_modes(connector); else intel_sdvo_get_ddc_modes(connector); @@ -1720,6 +1757,8 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } } + /* In defaut case sdvo lvds is false */ + sdvo_priv->is_lvds = false; intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); if (sdvo_priv->caps.output_flags & @@ -1773,6 +1812,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; + sdvo_priv->is_lvds = true; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1) { @@ -1780,6 +1820,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; + sdvo_priv->is_lvds = true; } else { From ad5b2a6db3eddc41358d8a73f5cfe1c38e7e3a19 Mon Sep 17 00:00:00 2001 From: Jonas Bonn Date: Fri, 15 May 2009 09:10:41 +0200 Subject: [PATCH 442/670] drm/i915: Determine type before initialising connector drm_connector_init sets both the connector type and the connector type_id on the newly initialised connector. As the connector type_id is coupled to the connector type, the connector type cannot simply be modified on an initialised connector. This patch changes the order of operations on intel_sdvo_init so that the type is determined before the connector is intialised. This fixes a bug whereby the name card0-VGA-1 would be allocted to both a CRT and an SDVO connector since the SDVO connector would be initialised with type 'unknown' and hence have its type_id assigned from the wrong pool. Signed-off-by: Jonas Bonn Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f79ebf4de63c..ded122c1ae2d 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1713,17 +1713,9 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) return false; } - connector = &intel_output->base; - - drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, - DRM_MODE_CONNECTOR_Unknown); - drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1); intel_output->type = INTEL_OUTPUT_SDVO; - connector->interlace_allowed = 0; - connector->doublescan_allowed = 0; - /* setup the DDC bus. */ if (output_device == SDVOB) i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB"); @@ -1731,7 +1723,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC"); if (!i2cbus) - goto err_connector; + goto err_inteloutput; sdvo_priv->i2c_bus = i2cbus; @@ -1747,7 +1739,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_output->i2c_bus = i2cbus; intel_output->dev_priv = sdvo_priv; - /* Read the regs to test if we can talk to the device */ for (i = 0; i < 0x40; i++) { if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) { @@ -1768,7 +1759,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_TMDS; connector_type = DRM_MODE_CONNECTOR_DVID; @@ -1786,7 +1776,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0) { sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_TVDAC; connector_type = DRM_MODE_CONNECTOR_SVIDEO; sdvo_priv->is_tv = true; @@ -1795,21 +1784,18 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0) { sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1) { sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_DAC; connector_type = DRM_MODE_CONNECTOR_VGA; } else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; sdvo_priv->is_lvds = true; @@ -1817,7 +1803,6 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1; - connector->display_info.subpixel_order = SubPixelHorizontalRGB; encoder_type = DRM_MODE_ENCODER_LVDS; connector_type = DRM_MODE_CONNECTOR_LVDS; sdvo_priv->is_lvds = true; @@ -1836,9 +1821,16 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) goto err_i2c; } + connector = &intel_output->base; + drm_connector_init(dev, connector, &intel_sdvo_connector_funcs, + connector_type); + drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs); + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type); drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs); - connector->connector_type = connector_type; drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc); drm_sysfs_connector_add(connector); @@ -1876,8 +1868,7 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) err_i2c: intel_i2c_destroy(intel_output->i2c_bus); -err_connector: - drm_connector_cleanup(connector); +err_inteloutput: kfree(intel_output); return false; From 0c752a93353d9b17dbe148312d732fbe06d235e1 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 22 May 2009 12:17:45 -0700 Subject: [PATCH 443/670] x86: introduce noxsave boot parameter Introduce "noxsave" boot parameter which will disable the cpu's xsave/xrstor capabilities. Useful for debugging and working around xsave related issues. [ Impact: make it possible to debug problems in the field ] Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- Documentation/kernel-parameters.txt | 4 ++++ arch/x86/kernel/cpu/common.c | 7 +++++++ 2 files changed, 11 insertions(+) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e87bdbfbcc75..fd5cac013037 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1535,6 +1535,10 @@ and is between 256 and 4096 characters. It is defined in the file register save and restore. The kernel will only save legacy floating-point registers on task switch. + noxsave [BUGS=X86] Disables x86 extended register state save + and restore using xsave. The kernel will fallback to + enabling legacy floating-point and sse state. + nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or wfi(ARM) instruction doesn't work correctly and not to use it. This is also useful when using JTAG debugger. diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c1caefc82e62..77848d9fca68 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -114,6 +114,13 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { } }; EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); +static int __init x86_xsave_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_XSAVE); + return 1; +} +__setup("noxsave", x86_xsave_setup); + #ifdef CONFIG_X86_32 static int cachesize_override __cpuinitdata = -1; static int disable_x86_serial_nr __cpuinitdata = 1; From 619ac3b75a1e9b2df66857f6a0fb466f1da5fa9e Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Mon, 18 May 2009 16:12:46 +0800 Subject: [PATCH 444/670] drm/i915: Use an I2C algo to do the flip to SDVO DDC bus. Previously, we would set the control bus switch before calls were made to request EDID information over DDC. But recently the DDC code started doing multiple I2C transfers to get the EDID extensions as well. This tripped up SDVO, because the control bus switch is only in effect until the next STOP after a START. By doing our own algo, we can wrap each i2c transaction on the DDC I2C bus with the control bus switch it requires. freedesktop.org bug #21042 Signed-off-by: Ma Ling [anholt: Hand application for conflict, fixed error path] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_sdvo.c | 67 +++++++++++++++++++++++++++++-- 1 file changed, 63 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index ded122c1ae2d..f3ef6bfd8ffc 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1402,10 +1402,8 @@ static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connect static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) { struct intel_output *intel_output = to_intel_output(connector); - struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; /* set the bus switch and get the modes */ - intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); intel_ddc_get_modes(intel_output); #if 0 @@ -1601,6 +1599,9 @@ static void intel_sdvo_destroy(struct drm_connector *connector) if (intel_output->i2c_bus) intel_i2c_destroy(intel_output->i2c_bus); + if (intel_output->ddc_bus) + intel_i2c_destroy(intel_output->ddc_bus); + drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); kfree(intel_output); @@ -1697,12 +1698,56 @@ intel_sdvo_get_digital_encoding_mode(struct intel_output *output) return true; } +static struct intel_output * +intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan) +{ + struct drm_device *dev = chan->drm_dev; + struct drm_connector *connector; + struct intel_output *intel_output = NULL; + + list_for_each_entry(connector, + &dev->mode_config.connector_list, head) { + if (to_intel_output(connector)->ddc_bus == chan) { + intel_output = to_intel_output(connector); + break; + } + } + return intel_output; +} + +static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) +{ + struct intel_output *intel_output; + struct intel_sdvo_priv *sdvo_priv; + struct i2c_algo_bit_data *algo_data; + struct i2c_algorithm *algo; + + algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data; + intel_output = + intel_sdvo_chan_to_intel_output( + (struct intel_i2c_chan *)(algo_data->data)); + if (intel_output == NULL) + return -EINVAL; + + sdvo_priv = intel_output->dev_priv; + algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo; + + intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus); + return algo->master_xfer(i2c_adap, msgs, num); +} + +static struct i2c_algorithm intel_sdvo_i2c_bit_algo = { + .master_xfer = intel_sdvo_master_xfer, +}; + bool intel_sdvo_init(struct drm_device *dev, int output_device) { struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; struct intel_i2c_chan *i2cbus = NULL; + struct intel_i2c_chan *ddcbus = NULL; int connector_type; u8 ch[0x40]; int i; @@ -1748,6 +1793,20 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) } } + /* setup the DDC bus. */ + if (output_device == SDVOB) + ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); + else + ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); + + if (ddcbus == NULL) + goto err_i2c; + + intel_sdvo_i2c_bit_algo.functionality = + intel_output->i2c_bus->adapter.algo->functionality; + ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo; + intel_output->ddc_bus = ddcbus; + /* In defaut case sdvo lvds is false */ sdvo_priv->is_lvds = false; intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps); @@ -1862,11 +1921,11 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) sdvo_priv->caps.output_flags & (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); - intel_output->ddc_bus = i2cbus; - return true; err_i2c: + if (ddcbus != NULL) + intel_i2c_destroy(intel_output->ddc_bus); intel_i2c_destroy(intel_output->i2c_bus); err_inteloutput: kfree(intel_output); From 0b827537e339c084ac9384df588969d400be9e0d Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Fri, 22 May 2009 13:23:37 -0700 Subject: [PATCH 445/670] x86: bugfix wbinvd() model check instead of family check wbinvd is supported on all CPUs 486 or later. But, pageattr.c is checking x86_model >= 4 before wbinvd(), which looks like an oversight bug. It was first introduced at one place by changeset d7c8f21a8cad0228c7c5ce2bb6dbd95d1ee49d13 and got copied over to second place in the same file later. [ Impact: fix missing cache flush on early-model CPUs, potential data corruption ] Signed-off-by: Venkatesh Pallipadi Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 797f9f107cb6..2cc019a3f71b 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -153,7 +153,7 @@ static void __cpa_flush_all(void *arg) */ __flush_tlb_all(); - if (cache && boot_cpu_data.x86_model >= 4) + if (cache && boot_cpu_data.x86 >= 4) wbinvd(); } @@ -218,7 +218,7 @@ static void cpa_flush_array(unsigned long *start, int numpages, int cache, /* 4M threshold */ if (numpages >= 1024) { - if (boot_cpu_data.x86_model >= 4) + if (boot_cpu_data.x86 >= 4) wbinvd(); return; } From 0af48f42df15b97080b450d24219dd95db7b929a Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Fri, 22 May 2009 13:23:38 -0700 Subject: [PATCH 446/670] x86: cpa_flush_array wbinvd should be done on all CPUs cpa_flush_array seems to prefer wbinvd() over clflush at 4M threshold. clflush needs to be done on only one CPU as per instruction definition. wbinvd() however, should be done on all CPUs. [ Impact: fix missing flush which could cause data corruption ] Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 2cc019a3f71b..0f9052bcec4b 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -204,6 +204,11 @@ static void cpa_flush_range(unsigned long start, int numpages, int cache) } } +static void wbinvd_local(void *unused) +{ + wbinvd(); +} + static void cpa_flush_array(unsigned long *start, int numpages, int cache, int in_flags, struct page **pages) { @@ -219,7 +224,8 @@ static void cpa_flush_array(unsigned long *start, int numpages, int cache, /* 4M threshold */ if (numpages >= 1024) { if (boot_cpu_data.x86 >= 4) - wbinvd(); + on_each_cpu(wbinvd_local, NULL, 1); + return; } /* From a49a018a6ea6d73742a81d673fe5ec4a7d2137b3 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 22 May 2009 16:53:40 -0400 Subject: [PATCH 447/670] [ARM] add coherent DMA mask for mv643xx_eth Since commit eb0519b5a1cf, mv643xx_eth is non functional on ARM because the platform device declaration does not include any coherent DMA mask and coherent memory allocations fail. Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 6 ++++++ arch/arm/mach-loki/common.c | 6 ++++++ arch/arm/mach-mv78xx0/common.c | 12 ++++++++++++ arch/arm/mach-orion5x/common.c | 3 +++ 4 files changed, 27 insertions(+) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 3fab82a4c8fc..be1ca28fed3f 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -144,6 +144,9 @@ static struct platform_device kirkwood_ge00 = { .id = 0, .num_resources = 1, .resource = kirkwood_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -202,6 +205,9 @@ static struct platform_device kirkwood_ge01 = { .id = 1, .num_resources = 1, .resource = kirkwood_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c index c0d2d9d12e74..818f19d7ab1f 100644 --- a/arch/arm/mach-loki/common.c +++ b/arch/arm/mach-loki/common.c @@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = { .id = 0, .num_resources = 1, .resource = loki_ge0_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) @@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = { .id = 1, .num_resources = 1, .resource = loki_ge1_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 0d88eea6a09c..1b22e4af8791 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = { .id = 0, .num_resources = 1, .resource = mv78xx0_ge00_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) @@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = { .id = 1, .num_resources = 1, .resource = mv78xx0_ge01_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) @@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = { .id = 2, .num_resources = 1, .resource = mv78xx0_ge10_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data) @@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = { .id = 3, .num_resources = 1, .resource = mv78xx0_ge11_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data) diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index a51fb9dd65a7..b1c7778d9f96 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = { .id = 0, .num_resources = 1, .resource = orion5x_eth_resources, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, }; void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) From 95caa0a9bdaf93607bd0cc8932f53112496f2f22 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 22 May 2009 21:30:39 -0300 Subject: [PATCH 448/670] icom: fix rmmod crash Actually the icom driver is crashing when is being removed because the driver is kfreeing the adapter structure before calling pci_release_regions(), which result in the following error: Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d33 Faulting instruction address: 0xc000000000246b80 Oops: Kernel access of bad area, sig: 11 [#1] .... [c000000012d436a0] [c0000000001002d0] .kfree+0x120/0x34c (unreliable) [c000000012d43730] [c000000000246d60] .pci_release_selected_regions+0x3c/0x68 [c000000012d437c0] [d000000002d54700] .icom_kref_release+0xf4/0x118 [icom] [c000000012d43850] [c000000000232e50] .kref_put+0x74/0x94 [c000000012d438d0] [d000000002d56c58] .icom_remove+0x40/0xa4 [icom] [c000000012d43960] [c000000000249e48] .pci_device_remove+0x50/0x90 [c000000012d439e0] [c0000000002d68d8] .__device_release_driver+0x94/0xd4 [c000000012d43a70] [c0000000002d7104] .driver_detach+0xf8/0x12c [c000000012d43b00] [c0000000002d549c] .bus_remove_driver+0xbc/0x11c [c000000012d43b90] [c0000000002d71dc] .driver_unregister+0x60/0x80 [c000000012d43c20] [c00000000024a07c] .pci_unregister_driver+0x44/0xe8 [c000000012d43cb0] [d000000002d56bf4] .icom_exit+0x1c/0x40 [icom] [c000000012d43d30] [c000000000095fa8] .SyS_delete_module+0x214/0x2a8 [c000000012d43e30] [c00000000000852c] syscall_exit+0x0/0x40 Signed-off-by: Breno Leitao Cc: stable@kernel.org Cc: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/icom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 6579e2be1dd1..a461b3b2c72d 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1472,8 +1472,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter) free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); iounmap(icom_adapter->base_addr); - icom_free_adapter(icom_adapter); pci_release_regions(icom_adapter->pci_dev); + icom_free_adapter(icom_adapter); } static void icom_kref_release(struct kref *kref) From 14f0aa359365e8a93a77b71e3b840274b9b4dcb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 23 May 2009 11:36:20 +0100 Subject: [PATCH 449/670] [ARM] disable NX support for OABI-supporting kernels Our signal syscall restart handling for these kernels still uses the userspace stack to build code for restarting the syscall. Unfortunately, fixing this is non-trivial, and so for the time being, we resolve the problem by disabling NX support. Signed-off-by: Russell King --- arch/arm/kernel/elf.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c index d4a0da1e48f4..950391f194c4 100644 --- a/arch/arm/kernel/elf.c +++ b/arch/arm/kernel/elf.c @@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack) return 1; if (cpu_architecture() < CPU_ARCH_ARMv6) return 1; +#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT) + /* + * If we have support for OABI programs, we can never allow NX + * support - our signal syscall restart mechanism relies upon + * being able to execute code placed on the user stack. + */ + return 1; +#else return 0; +#endif } EXPORT_SYMBOL(arm_elf_read_implies_exec); From df391e0eda1e678add56a8e34226edf05d89af6a Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 23 May 2009 09:51:20 -0700 Subject: [PATCH 450/670] Input: multitouch - add tracking ID to the protocol MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are a few multi-touch devices that support finger tracking well in hardware, Stantum being the prime example. By exposing the tracking ID in the MT protocol, evdev bandwidth and cpu usage in user space can be reduced. This patch adds the ABS_MT_TRACKING_ID to the MT protocol. Signed-off-by: Henrik Rydberg Tested-by: Stéphane Chatty Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 1 + include/linux/input.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/input/input.c b/drivers/input/input.c index e54e002665b0..5d445f48789b 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -42,6 +42,7 @@ static unsigned int input_abs_bypass_init_data[] __initdata = { ABS_MT_POSITION_Y, ABS_MT_TOOL_TYPE, ABS_MT_BLOB_ID, + ABS_MT_TRACKING_ID, 0 }; static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)]; diff --git a/include/linux/input.h b/include/linux/input.h index 0e6ff5de3588..6fed4f6a9c9e 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -656,6 +656,7 @@ struct input_absinfo { #define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ #define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ +#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) From f9fcfc3b4627a1ec9b50411060f1b384926d6610 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 23 May 2009 09:51:21 -0700 Subject: [PATCH 451/670] Input: multitouch - augment event semantics documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Through the collaboration to adapt the N-trig and Stantum HID drivers to the MT protocol, some semantic clarifications to the protocol have been made. This patch adds them to the MT documentation. Signed-off-by: Henrik Rydberg Tested-by: Stéphane Chatty Signed-off-by: Dmitry Torokhov --- Documentation/input/multi-touch-protocol.txt | 103 ++++++++++++++----- 1 file changed, 79 insertions(+), 24 deletions(-) diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 9f09557aea39..a12ea3b586e6 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -18,8 +18,12 @@ Usage Anonymous finger details are sent sequentially as separate packets of ABS events. Only the ABS_MT events are recognized as part of a finger packet. The end of a packet is marked by calling the input_mt_sync() -function, which generates a SYN_MT_REPORT event. The end of multi-touch -transfer is marked by calling the usual input_sync() function. +function, which generates a SYN_MT_REPORT event. This instructs the +receiver to accept the data for the current finger and prepare to receive +another. The end of a multi-touch transfer is marked by calling the usual +input_sync() function. This instructs the receiver to act upon events +accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new +set of events/packets. A set of ABS_MT events with the desired properties is defined. The events are divided into categories, to allow for partial implementation. The @@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size of the approaching finger. Anisotropy and direction may be specified with -ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with -more granular information may specify general shapes as blobs, i.e., as a -sequence of rectangular shapes grouped together by an -ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify -whether the touching tool is a finger or a pen or something else. +ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The +ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a +finger or a pen or something else. Devices with more granular information +may specify general shapes as blobs, i.e., as a sequence of rectangular +shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices +that currently support it, the ABS_MT_TRACKING_ID event may be used to +report finger tracking from hardware [5]. + +Here is what a minimal event sequence for a two-finger touch would look +like: + + ABS_MT_TOUCH_MAJOR + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + ABS_MT_TOUCH_MAJOR + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + SYN_REPORT Event Semantics @@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR The length of the major axis of the contact. The length should be given in surface units. If the surface has an X times Y resolution, the largest -possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal. +possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4]. ABS_MT_TOUCH_MINOR The length, in surface units, of the minor axis of the contact. If the -contact is circular, this event can be omitted. +contact is circular, this event can be omitted [4]. ABS_MT_WIDTH_MAJOR The length, in surface units, of the major axis of the approaching tool. This should be understood as the size of the tool itself. The orientation of the contact and the approaching tool are assumed to be the -same. +same [4]. ABS_MT_WIDTH_MINOR The length, in surface units, of the minor axis of the approaching -tool. Omit if circular. +tool. Omit if circular [4]. The above four values can be used to derive additional information about the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates @@ -70,14 +89,17 @@ different characteristic widths [1]. ABS_MT_ORIENTATION -The orientation of the ellipse. The value should describe half a revolution -clockwise around the touch center. The scale of the value is arbitrary, but -zero should be returned for an ellipse aligned along the Y axis of the -surface. As an example, an index finger placed straight onto the axis could -return zero orientation, something negative when twisted to the left, and -something positive when twisted to the right. This value can be omitted if -the touching object is circular, or if the information is not available in -the kernel driver. +The orientation of the ellipse. The value should describe a signed quarter +of a revolution clockwise around the touch center. The signed value range +is arbitrary, but zero should be returned for a finger aligned along the Y +axis of the surface, a negative value when finger is turned to the left, and +a positive value when finger turned to the right. When completely aligned with +the X axis, the range max should be returned. Orientation can be omitted +if the touching object is circular, or if the information is not available +in the kernel driver. Partial orientation support is possible if the device +can distinguish between the two axis, but not (uniquely) any values in +between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1] +[4]. ABS_MT_POSITION_X @@ -98,8 +120,35 @@ ABS_MT_BLOB_ID The BLOB_ID groups several packets together into one arbitrarily shaped contact. This is a low-level anonymous grouping, and should not be confused -with the high-level contactID, explained below. Most kernel drivers will -not have this capability, and can safely omit the event. +with the high-level trackingID [5]. Most kernel drivers will not have blob +capability, and can safely omit the event. + +ABS_MT_TRACKING_ID + +The TRACKING_ID identifies an initiated contact throughout its life cycle +[5]. There are currently only a few devices that support it, so this event +should normally be omitted. + + +Event Computation +----------------- + +The flora of different hardware unavoidably leads to some devices fitting +better to the MT protocol than others. To simplify and unify the mapping, +this section gives recipes for how to compute certain events. + +For devices reporting contacts as rectangular shapes, signed orientation +cannot be obtained. Assuming X and Y are the lengths of the sides of the +touching rectangle, here is a simple formula that retains the most +information possible: + + ABS_MT_TOUCH_MAJOR := max(X, Y) + ABS_MT_TOUCH_MINOR := min(X, Y) + ABS_MT_ORIENTATION := bool(X > Y) + +The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that +the device can distinguish between a finger along the Y axis (0) and a +finger along the X axis (1). Finger Tracking @@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of anonymous contacts currently on the surface. The order in which the packets appear in the event stream is not important. -The process of finger tracking, i.e., to assign a unique contactID to each +The process of finger tracking, i.e., to assign a unique trackingID to each initiated contact on the surface, is left to user space; preferably the -multi-touch X driver [3]. In that driver, the contactID stays the same and +multi-touch X driver [3]. In that driver, the trackingID stays the same and unique until the contact vanishes (when the finger leaves the surface). The problem of assigning a set of anonymous fingers to a set of identified fingers is a euclidian bipartite matching problem at each event update, and relies on a sufficiently rapid update rate. +There are a few devices that support trackingID in hardware. User space can +make use of these native identifiers to reduce bandwidth and cpu usage. + + Notes ----- @@ -136,5 +189,7 @@ could be used to derive tilt. time of writing (April 2009), the MT protocol is not yet merged, and the prototype implements finger matching, basic mouse support and two-finger scrolling. The project aims at improving the quality of current multi-touch -functionality available in the synaptics X driver, and in addition +functionality available in the Synaptics X driver, and in addition implement more advanced gestures. +[4] See the section on event computation. +[5] See the section on finger tracking. From 8db14ca12569fe885694bd3d5ff84c2d973d3cb0 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 23 May 2009 18:57:25 +0000 Subject: [PATCH 452/670] [CIFS] Avoid open on possible directories since Samba now rejects them Small change (mostly formatting) to limit lookup based open calls to file create only. After discussion yesteday on samba-technical about the posix lookup regression, and looking at a problem with cifs posix open to one particular Samba version, Jeff and JRA realized that Samba server's behavior changed in this area (posix open behavior on files vs. directories). To make this behavior consistent, JRA just made a fix to Samba server to alter how it handles open of directories (now returning the equivalent of EISDIR instead of success). Since we don't know at lookup time whether the inode is a directory or file (and thus whether posix open will succeed with most current Samba server), this change avoids the posix open code on lookup open (just issues posix open on creates). This gets the semantic benefits we want (atomicity, posix byte range locks, improved write semantics on newly created files) and file create still is fast, and we avoid the problem that Jeff noticed yesterday with "openat" (and some open directory calls) of non-cached directories to one version of Samba server, and will work with future Samba versions (which include the fix jra just pushed into Samba server). I confirmed this approach with jra yesterday and with Shirish today. Posix open is only called (at lookup time) for file create now. For opens (rather than creates), because we do not know if it is a file or directory yet, and current Samba no longer allows us to do posix open on dirs, we could end up wasting an open call on what turns out to be a dir. For file opens, we wait to call posix open till cifs_open. It could be added here (lookup) in the future but the performance tradeoff of the extra network request when EISDIR or EACCES is returned would have to be weighed against the 50% reduction in network traffic in the other paths. Reviewed-by: Shirish Pargaonkar Tested-by: Jeff Layton CC: Jeremy Allison Signed-off-by: Steve French --- fs/cifs/dir.c | 43 ++++++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index f49d684edd96..3758965d73d5 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -657,31 +657,36 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, } cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode)); + /* Posix open is only called (at lookup time) for file create now. + * For opens (rather than creates), because we do not know if it + * is a file or directory yet, and current Samba no longer allows + * us to do posix open on dirs, we could end up wasting an open call + * on what turns out to be a dir. For file opens, we wait to call posix + * open till cifs_open. It could be added here (lookup) in the future + * but the performance tradeoff of the extra network request when EISDIR + * or EACCES is returned would have to be weighed against the 50% + * reduction in network traffic in the other paths. + */ if (pTcon->unix_ext) { if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && - (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open) { - if (!((nd->intent.open.flags & O_CREAT) && - (nd->intent.open.flags & O_EXCL))) { - rc = cifs_posix_open(full_path, &newInode, + (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open && + (nd->intent.open.flags & O_CREAT)) { + rc = cifs_posix_open(full_path, &newInode, parent_dir_inode->i_sb, nd->intent.open.create_mode, nd->intent.open.flags, &oplock, &fileHandle, xid); - /* - * This code works around a bug in - * samba posix open in samba versions 3.3.1 - * and earlier where create works - * but open fails with invalid parameter. - * If either of these error codes are - * returned, follow the normal lookup. - * Otherwise, the error during posix open - * is handled. - */ - if ((rc != -EINVAL) && (rc != -EOPNOTSUPP)) - posix_open = true; - else - pTcon->broken_posix_open = true; - } + /* + * The check below works around a bug in POSIX + * open in samba versions 3.3.1 and earlier where + * open could incorrectly fail with invalid parameter. + * If either that or op not supported returned, follow + * the normal lookup. + */ + if ((rc == 0) || (rc == -ENOENT)) + posix_open = true; + else if ((rc == -EINVAL) || (rc != -EOPNOTSUPP)) + pTcon->broken_posix_open = true; } if (!posix_open) rc = cifs_get_inode_info_unix(&newInode, full_path, From 59a3759d0fe8d969888c741bb33f4946e4d3750d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 23 May 2009 14:47:00 -0700 Subject: [PATCH 453/670] Linux 2.6.30-rc7 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index b57e1f539e83..739fd34a72a2 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc6 -NAME = Vindictive Armadillo +EXTRAVERSION = -rc7 +NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* # To see a list of typical targets execute "make help" From 93574844bc3906941b89d6b6f72e01e87413f3c4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ozan=20=C3=87a=C4=9Flayan?= Date: Sat, 23 May 2009 15:00:04 +0300 Subject: [PATCH 454/670] ALSA: hda - Add forced codec-slots for ASUS W5Fm MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ASUS W5Fm needs the fixed codec-slots to probe to override the BIOS problem like W5F. Tested-by: Alp Kılıç Signed-off-by: Ozan ÇaÄŸlayan Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 21e99cfa8c49..3128e1a6bc65 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2141,6 +2141,7 @@ static struct snd_pci_quirk probe_mask_list[] __devinitdata = { /* including bogus ALC268 in slot#2 that conflicts with ALC888 */ SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01), /* forced codec slots */ + SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103), SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103), {} }; From 679d92ed1403b6cf9a19aa42ec62b81cae1aa017 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 24 May 2009 19:00:08 +0200 Subject: [PATCH 455/670] ALSA: hda - Add 5stack-no-fp model for STAC927x The recent fix for the headphone volume control on IDT/STAC codecs resulted in the removal of invalid "Side" volume eventually. But, if the front panel doesn't exist, this setup could be regarded as a sort of regression, as reported in kernel bug #13250. Now as a workaround, a new model 5stack-no-fp is added so that the user without the front panel can choose this one explicitly. Reference: bko#13250 http://bugzilla.kernel.org/show_bug.cgi?id=13250 Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_sigmatel.c | 10 ++++++++++ 2 files changed, 11 insertions(+) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 8eec05bc079e..322869fc8a9e 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -334,6 +334,7 @@ STAC9227/9228/9229/927x ref-no-jd Reference board without HP/Mic jack detection 3stack D965 3stack 5stack D965 5stack + SPDIF + 5stack-no-fp D965 5stack without front panel dell-3stack Dell Dimension E520 dell-bios Fixes with Dell BIOS setup auto BIOS setup (default) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 03b3646018a1..d2fd8ef6aef8 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -150,6 +150,7 @@ enum { STAC_D965_REF, STAC_D965_3ST, STAC_D965_5ST, + STAC_D965_5ST_NO_FP, STAC_DELL_3ST, STAC_DELL_BIOS, STAC_927X_MODELS @@ -2154,6 +2155,13 @@ static unsigned int d965_5st_pin_configs[14] = { 0x40000100, 0x40000100 }; +static unsigned int d965_5st_no_fp_pin_configs[14] = { + 0x40000100, 0x40000100, 0x0181304e, 0x01014010, + 0x01a19040, 0x01011012, 0x01016011, 0x40000100, + 0x40000100, 0x40000100, 0x40000100, 0x01442070, + 0x40000100, 0x40000100 +}; + static unsigned int dell_3st_pin_configs[14] = { 0x02211230, 0x02a11220, 0x01a19040, 0x01114210, 0x01111212, 0x01116211, 0x01813050, 0x01112214, @@ -2166,6 +2174,7 @@ static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = { [STAC_D965_REF] = ref927x_pin_configs, [STAC_D965_3ST] = d965_3st_pin_configs, [STAC_D965_5ST] = d965_5st_pin_configs, + [STAC_D965_5ST_NO_FP] = d965_5st_no_fp_pin_configs, [STAC_DELL_3ST] = dell_3st_pin_configs, [STAC_DELL_BIOS] = NULL, }; @@ -2176,6 +2185,7 @@ static const char *stac927x_models[STAC_927X_MODELS] = { [STAC_D965_REF] = "ref", [STAC_D965_3ST] = "3stack", [STAC_D965_5ST] = "5stack", + [STAC_D965_5ST_NO_FP] = "5stack-no-fp", [STAC_DELL_3ST] = "dell-3stack", [STAC_DELL_BIOS] = "dell-bios", }; From 657cafa6b0f5296424d6f43f6f6eeb4a3222117e Mon Sep 17 00:00:00 2001 From: Alex Riesen Date: Sun, 24 May 2009 15:30:48 +0200 Subject: [PATCH 456/670] Use a format for linux_banner There is no format specifiers left in the linux_banner, and gcc-4.3 complains seeing the printk. Signed-off-by: Alex Riesen Signed-off-by: Linus Torvalds --- init/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/init/main.c b/init/main.c index 3bbf93be744c..d721dad05dd7 100644 --- a/init/main.c +++ b/init/main.c @@ -566,8 +566,7 @@ asmlinkage void __init start_kernel(void) tick_init(); boot_cpu_init(); page_address_init(); - printk(KERN_NOTICE); - printk(linux_banner); + printk(KERN_NOTICE "%s", linux_banner); setup_arch(&command_line); mm_init_owner(&init_mm, &init_task); setup_command_line(command_line); From 32bdfac5462d777f35b00838893c4f87baf23efe Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 24 May 2009 21:15:07 +0200 Subject: [PATCH 457/670] PM: Do not hold dpm_list_mtx while disabling/enabling nonboot CPUs We shouldn't hold dpm_list_mtx while executing [disable|enable]_nonboot_cpus(), because theoretically this may lead to a deadlock as shown by the following example (provided by Johannes Berg): CPU 3 CPU 2 CPU 1 suspend/hibernate something: rtnl_lock() device_pm_lock() -> mutex_lock(&dpm_list_mtx) mutex_lock(&dpm_list_mtx) linkwatch_work -> rtnl_lock() disable_nonboot_cpus() -> flush CPU 3 workqueue Fortunately, device drivers are supposed to stop any activities that might lead to the registration of new device objects way before disable_nonboot_cpus() is called, so it shouldn't be necessary to hold dpm_list_mtx over the entire late part of device suspend and early part of device resume. Thus, during the late suspend and the early resume of devices acquire dpm_list_mtx only when dpm_list is going to be traversed and release it right after that. This patch is reported to fix the regressions tracked as http://bugzilla.kernel.org/show_bug.cgi?id=13245. Signed-off-by: Rafael J. Wysocki Acked-by: Alan Stern Reported-by: Miles Lane Tested-by: Ming Lei --- drivers/base/power/main.c | 4 ++++ kernel/kexec.c | 2 -- kernel/power/disk.c | 21 +++------------------ kernel/power/main.c | 7 +------ 4 files changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 69b4ddb7de3b..3e4bc699bc0f 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -357,6 +357,7 @@ static void dpm_power_up(pm_message_t state) { struct device *dev; + mutex_lock(&dpm_list_mtx); list_for_each_entry(dev, &dpm_list, power.entry) if (dev->power.status > DPM_OFF) { int error; @@ -366,6 +367,7 @@ static void dpm_power_up(pm_message_t state) if (error) pm_dev_err(dev, state, " early", error); } + mutex_unlock(&dpm_list_mtx); } /** @@ -614,6 +616,7 @@ int device_power_down(pm_message_t state) int error = 0; suspend_device_irqs(); + mutex_lock(&dpm_list_mtx); list_for_each_entry_reverse(dev, &dpm_list, power.entry) { error = suspend_device_noirq(dev, state); if (error) { @@ -622,6 +625,7 @@ int device_power_down(pm_message_t state) } dev->power.status = DPM_OFF_IRQ; } + mutex_unlock(&dpm_list_mtx); if (error) device_power_up(resume_event(state)); return error; diff --git a/kernel/kexec.c b/kernel/kexec.c index 5a758c6e4950..e4983770913b 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -1451,7 +1451,6 @@ int kernel_kexec(void) error = device_suspend(PMSG_FREEZE); if (error) goto Resume_console; - device_pm_lock(); /* At this point, device_suspend() has been called, * but *not* device_power_down(). We *must* * device_power_down() now. Otherwise, drivers for @@ -1489,7 +1488,6 @@ int kernel_kexec(void) enable_nonboot_cpus(); device_power_up(PMSG_RESTORE); Resume_devices: - device_pm_unlock(); device_resume(PMSG_RESTORE); Resume_console: resume_console(); diff --git a/kernel/power/disk.c b/kernel/power/disk.c index b0dc9e7a0d17..5cb080e7eebd 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -215,8 +215,6 @@ static int create_image(int platform_mode) if (error) return error; - device_pm_lock(); - /* At this point, device_suspend() has been called, but *not* * device_power_down(). We *must* call device_power_down() now. * Otherwise, drivers for some devices (e.g. interrupt controllers) @@ -227,7 +225,7 @@ static int create_image(int platform_mode) if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " "aborting hibernation\n"); - goto Unlock; + return error; } error = platform_pre_snapshot(platform_mode); @@ -280,9 +278,6 @@ static int create_image(int platform_mode) device_power_up(in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); - Unlock: - device_pm_unlock(); - return error; } @@ -344,13 +339,11 @@ static int resume_target_kernel(bool platform_mode) { int error; - device_pm_lock(); - error = device_power_down(PMSG_QUIESCE); if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " "aborting resume\n"); - goto Unlock; + return error; } error = platform_pre_restore(platform_mode); @@ -403,9 +396,6 @@ static int resume_target_kernel(bool platform_mode) device_power_up(PMSG_RECOVER); - Unlock: - device_pm_unlock(); - return error; } @@ -464,11 +454,9 @@ int hibernation_platform_enter(void) goto Resume_devices; } - device_pm_lock(); - error = device_power_down(PMSG_HIBERNATE); if (error) - goto Unlock; + goto Resume_devices; error = hibernation_ops->prepare(); if (error) @@ -493,9 +481,6 @@ int hibernation_platform_enter(void) device_power_up(PMSG_RESTORE); - Unlock: - device_pm_unlock(); - Resume_devices: entering_platform_hibernation = false; device_resume(PMSG_RESTORE); diff --git a/kernel/power/main.c b/kernel/power/main.c index f99ed6a75eac..868028280d13 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -289,12 +289,10 @@ static int suspend_enter(suspend_state_t state) { int error; - device_pm_lock(); - if (suspend_ops->prepare) { error = suspend_ops->prepare(); if (error) - goto Done; + return error; } error = device_power_down(PMSG_SUSPEND); @@ -343,9 +341,6 @@ static int suspend_enter(suspend_state_t state) if (suspend_ops->finish) suspend_ops->finish(); - Done: - device_pm_unlock(); - return error; } From d5a877e8dd409d8c702986d06485c374b705d340 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Sun, 24 May 2009 13:03:43 -0700 Subject: [PATCH 458/670] async: make sure independent async domains can't accidentally entangle The problem occurs when async_synchronize_full_domain() is called when the async_pending list is not empty. This will cause lowest_running() to return the cookie of the first entry on the async_pending list, which might be nothing at all to do with the domain being asked for and thus cause the domain synchronization to wait for an unrelated domain. This can cause a deadlock if domain synchronization is used from one domain to wait for another. Fix by running over the async_pending list to see if any pending items actually belong to our domain (and return their cookies if they do). Signed-off-by: James Bottomley Signed-off-by: Arjan van de Ven Signed-off-by: Linus Torvalds --- kernel/async.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/kernel/async.c b/kernel/async.c index 968ef9457d4e..50540301ed0f 100644 --- a/kernel/async.c +++ b/kernel/async.c @@ -92,19 +92,23 @@ extern int initcall_debug; static async_cookie_t __lowest_in_progress(struct list_head *running) { struct async_entry *entry; + async_cookie_t ret = next_cookie; /* begin with "infinity" value */ + if (!list_empty(running)) { entry = list_first_entry(running, struct async_entry, list); - return entry->cookie; - } else if (!list_empty(&async_pending)) { - entry = list_first_entry(&async_pending, - struct async_entry, list); - return entry->cookie; - } else { - /* nothing in progress... next_cookie is "infinity" */ - return next_cookie; + ret = entry->cookie; } + if (!list_empty(&async_pending)) { + list_for_each_entry(entry, &async_pending, list) + if (entry->running == running) { + ret = entry->cookie; + break; + } + } + + return ret; } static async_cookie_t lowest_in_progress(struct list_head *running) From 71c9d8b68b299bef614afc7907393564a9f1476f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 25 May 2009 12:01:59 +0900 Subject: [PATCH 459/670] x86: Remove remap percpu allocator for the time being Remap percpu allocator has subtle bug when combined with page attribute changing. Remap percpu allocator aliases PMD pages for the first chunk and as pageattr doesn't know about the alias it ends up updating page attributes of the original mapping thus leaving the alises in inconsistent state which might lead to subtle data corruption. Please read the following threads for more information: http://thread.gmane.org/gmane.linux.kernel/835783 The following is the proposed fix which teaches pageattr about percpu aliases. http://thread.gmane.org/gmane.linux.kernel/837157 However, the above changes are deemed too pervasive for upstream inclusion for 2.6.30 release, so this patch essentially disables the remap allocator for the time being. Signed-off-by: Tejun Heo LKML-Reference: <4A1A0A27.4050301@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_percpu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 3a97a4cf1872..8f0e13be36b3 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -160,8 +160,10 @@ static ssize_t __init setup_pcpu_remap(size_t static_size) /* * If large page isn't supported, there's no benefit in doing * this. Also, on non-NUMA, embedding is better. + * + * NOTE: disabled for now. */ - if (!cpu_has_pse || !pcpu_need_numa()) + if (true || !cpu_has_pse || !pcpu_need_numa()) return -EINVAL; /* From 461c6c3a0a23a8fac1a4b636e93ff5dfe599a241 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 25 May 2009 08:06:02 +0200 Subject: [PATCH 460/670] ALSA: hda - Add missing check of pin vref 50 and others in Realtek codecs Some Realtek codecs like ALC861 seem to support only VREF50 while the current driver assumes it's only VREF80. Check other VREF bits to set the correct value. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index bcbb736f94f0..0fd258eba3a5 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -776,6 +776,12 @@ static void alc_set_input_pin(struct hda_codec *codec, hda_nid_t nid, pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT; if (pincap & AC_PINCAP_VREF_80) val = PIN_VREF80; + else if (pincap & AC_PINCAP_VREF_50) + val = PIN_VREF50; + else if (pincap & AC_PINCAP_VREF_100) + val = PIN_VREF100; + else if (pincap & AC_PINCAP_VREF_GRD) + val = PIN_VREFGRD; } snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, val); } From 4e2fd555199977c5994d1a4d2d3b8761b20ca4c7 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 25 May 2009 00:42:34 -0700 Subject: [PATCH 461/670] gianfar: fix BUG under load after introduction of skb recycling Since commit 0fd56bb5be6455d0d42241e65aed057244665e5e ("gianfar: Add support for skb recycling"), gianfar puts skbuffs that are in the rx ring back onto the recycle list as-is in case there was a receive error, but this breaks the following invariant: that all skbuffs on the recycle list have skb->data = skb->head + NET_SKB_PAD. The RXBUF_ALIGNMENT realignment done in gfar_new_skb() will be done twice on skbuffs recycled in this way, causing there not to be enough room in the skb anymore to receive a full packet, eventually leading to an skb_over_panic from gfar_clean_rx_ring() -> skb_put(). Resetting the skb->data pointer to skb->head + NET_SKB_PAD before putting the skb back onto the recycle list restores the mentioned invariant, and should fix this issue. Reported-by: Michael Guntsche Tested-by: Michael Guntsche Signed-off-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/gianfar.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index b2c49679bba7..a0519184e54e 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1885,8 +1885,17 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - else if (skb) + else if (skb) { + /* + * We need to reset ->data to what it + * was before gfar_new_skb() re-aligned + * it to an RXBUF_ALIGNMENT boundary + * before we put the skb back on the + * recycle list. + */ + skb->data = skb->head + NET_SKB_PAD; __skb_queue_head(&priv->rx_recycle, skb); + } } else { /* Increment the number of packets */ dev->stats.rx_packets++; From bfcaa50270e18f35220a11d46e98fc6232c24606 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 25 May 2009 17:23:15 +0200 Subject: [PATCH 462/670] netfilter: nf_ct_tcp: fix accepting invalid RST segments Robert L Mathews discovered that some clients send evil TCP RST segments, which are accepted by netfilter conntrack but discarded by the destination. Thus the conntrack entry is destroyed but the destination retransmits data until timeout. The same technique, i.e. sending properly crafted RST segments, can easily be used to bypass connlimit/connbytes based restrictions (the sample script written by Robert can be found in the netfilter mailing list archives). The patch below adds a new flag and new field to struct ip_ct_tcp_state so that checking RST segments can be made more strict and thus TCP conntrack can catch the invalid ones: the RST segment is accepted only if its sequence number higher than or equal to the highest ack we seen from the other direction. (The last_ack field cannot be reused because it is used to catch resent packets.) Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy --- include/linux/netfilter/nf_conntrack_tcp.h | 4 ++++ net/netfilter/nf_conntrack_proto_tcp.c | 18 ++++++++++++++++++ 2 files changed, 22 insertions(+) diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index 3066789b972a..b2f384d42611 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -35,6 +35,9 @@ enum tcp_conntrack { /* Has unacknowledged data */ #define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED 0x10 +/* The field td_maxack has been set */ +#define IP_CT_TCP_FLAG_MAXACK_SET 0x20 + struct nf_ct_tcp_flags { __u8 flags; __u8 mask; @@ -46,6 +49,7 @@ struct ip_ct_tcp_state { u_int32_t td_end; /* max of seq + len */ u_int32_t td_maxend; /* max of ack + max(win, 1) */ u_int32_t td_maxwin; /* max(win) */ + u_int32_t td_maxack; /* max of ack */ u_int8_t td_scale; /* window scale factor */ u_int8_t flags; /* per direction options */ }; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index b5ccf2b4b2e7..97a6e93d742e 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -634,6 +634,14 @@ static bool tcp_in_window(const struct nf_conn *ct, sender->td_end = end; sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED; } + if (tcph->ack) { + if (!(sender->flags & IP_CT_TCP_FLAG_MAXACK_SET)) { + sender->td_maxack = ack; + sender->flags |= IP_CT_TCP_FLAG_MAXACK_SET; + } else if (after(ack, sender->td_maxack)) + sender->td_maxack = ack; + } + /* * Update receiver data. */ @@ -918,6 +926,16 @@ static int tcp_packet(struct nf_conn *ct, "nf_ct_tcp: invalid state "); return -NF_ACCEPT; case TCP_CONNTRACK_CLOSE: + if (index == TCP_RST_SET + && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET) + && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) { + /* Invalid RST */ + write_unlock_bh(&tcp_lock); + if (LOG_INVALID(net, IPPROTO_TCP)) + nf_log_packet(pf, 0, skb, NULL, NULL, NULL, + "nf_ct_tcp: invalid RST "); + return -NF_ACCEPT; + } if (index == TCP_RST_SET && ((test_bit(IPS_SEEN_REPLY_BIT, &ct->status) && ct->proto.tcp.last_index == TCP_SYN_SET) From b38b1f616867c832301f24eaf259889494d495b3 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 25 May 2009 17:29:43 +0200 Subject: [PATCH 463/670] netfilter: nf_ct_dccp: add missing DCCP protocol changes in event cache This patch adds the missing protocol state-change event reporting for DCCP. $ sudo conntrack -E [NEW] dccp 33 240 src=192.168.0.2 dst=192.168.1.2 sport=57040 dport=5001 [UNREPLIED] src=192.168.1.2 dst=192.168.1.100 sport=5001 dport=57040 With this patch: $ sudo conntrack -E [NEW] dccp 33 240 REQUEST src=192.168.0.2 dst=192.168.1.2 sport=57040 dport=5001 [UNREPLIED] src=192.168.1.2 dst=192.168.1.100 sport=5001 dport=57040 Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_proto_dccp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/netfilter/nf_conntrack_proto_dccp.c b/net/netfilter/nf_conntrack_proto_dccp.c index 8e757dd53396..aee0d6bea309 100644 --- a/net/netfilter/nf_conntrack_proto_dccp.c +++ b/net/netfilter/nf_conntrack_proto_dccp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include static DEFINE_RWLOCK(dccp_lock); @@ -553,6 +554,9 @@ static int dccp_packet(struct nf_conn *ct, const struct sk_buff *skb, ct->proto.dccp.state = new_state; write_unlock_bh(&dccp_lock); + if (new_state != old_state) + nf_conntrack_event_cache(IPCT_PROTOINFO, ct); + dn = dccp_pernet(net); nf_ct_refresh_acct(ct, ctinfo, skb, dn->dccp_timeout[new_state]); From a8cd0244e9cebcf9b358d24c7e7410062f3665cb Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 24 May 2009 22:15:25 +0300 Subject: [PATCH 464/670] KVM: Make paravirt tlb flush also reload the PAE PDPTRs The paravirt tlb flush may be used not only to flush TLBs, but also to reload the four page-directory-pointer-table entries, as it is used as a replacement for reloading CR3. Change the code to do the entire CR3 reloading dance instead of simply flushing the TLB. Cc: stable@kernel.org Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index b6caf1329b1b..32cf11e5728a 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -2897,8 +2897,7 @@ static int kvm_pv_mmu_write(struct kvm_vcpu *vcpu, static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu) { - kvm_x86_ops->tlb_flush(vcpu); - set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests); + kvm_set_cr3(vcpu, vcpu->arch.cr3); return 1; } From a2edf57f510cce6a389cc14e58c6ad0a4296d6f9 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 24 May 2009 22:19:00 +0300 Subject: [PATCH 465/670] KVM: Fix PDPTR reloading on CR4 writes The processor is documented to reload the PDPTRs while in PAE mode if any of the CR4 bits PSE, PGE, or PAE change. Linux relies on this behaviour when zapping the low mappings of PAE kernels during boot. The code already handled changes to CR4.PAE; augment it to also notice changes to PSE and PGE. This triggered while booting an F11 PAE kernel; the futex initialization code runs before any CR3 reloads and writes to a NULL pointer; the futex subsystem ended up uninitialized, killing PI futexes and pulseaudio which uses them. Cc: stable@kernel.org Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 49079a46687b..3944e917e794 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -338,6 +338,9 @@ EXPORT_SYMBOL_GPL(kvm_lmsw); void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) { + unsigned long old_cr4 = vcpu->arch.cr4; + unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE; + if (cr4 & CR4_RESERVED_BITS) { printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n"); kvm_inject_gp(vcpu, 0); @@ -351,7 +354,8 @@ void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4) kvm_inject_gp(vcpu, 0); return; } - } else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & X86_CR4_PAE) + } else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE) + && ((cr4 ^ old_cr4) & pdptr_bits) && !load_pdptrs(vcpu, vcpu->arch.cr3)) { printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n"); kvm_inject_gp(vcpu, 0); From 62e1e389f87a8839ad83b08c44691d1df8320846 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:40:59 +1000 Subject: [PATCH 466/670] md: always update level / chunk_size / layout when writing v1.x metadata. We previously didn't update these fields when writing the metadata because they could never change. They can now, so we better write them. v0.90 metadata always updated these fields. Signed-off-by: NeilBrown --- drivers/md/md.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index fccc8343a250..aa79d55875f0 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1375,6 +1375,9 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) sb->raid_disks = cpu_to_le32(mddev->raid_disks); sb->size = cpu_to_le64(mddev->dev_sectors); + sb->chunksize = cpu_to_le32(mddev->chunk_size >> 9); + sb->level = cpu_to_le32(mddev->level); + sb->layout = cpu_to_le32(mddev->layout); if (mddev->bitmap && mddev->bitmap_file == NULL) { sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset); From 2b69c83924396ad1eda36fdd267c9d2f360f5555 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: [PATCH 467/670] md: improve errno return when setting array_size Instead of always returns EINVAL if anything goes wrong when setting the array size, add the option of E2BIG if the size requested is too large. This makes it easier for user-space to be sure what went wrong. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index aa79d55875f0..58e0b02a74c2 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3683,7 +3683,7 @@ array_size_store(mddev_t *mddev, const char *buf, size_t len) if (strict_blocks_to_sectors(buf, §ors) < 0) return -EINVAL; if (mddev->pers && mddev->pers->size(mddev, 0, 0) < sectors) - return -EINVAL; + return -E2BIG; mddev->external_size = 1; } From be512691036cc989c11d0f418187efbbf14468e6 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: [PATCH 468/670] md: bitmap: improve bitmap maintenance code. The code for checking which bits in the bitmap can be cleared has 2 problems: 1/ it repeatedly takes and drops a spinlock, where it would make more sense to just hold on to it most of the time. 2/ it doesn't make use of some opportunities to skip large sections of the bitmap This patch fixes those. It will only affect CPU consumption, not correctness. Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 47c68bc75a17..56df1cee8fb3 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1097,14 +1097,12 @@ void bitmap_daemon_work(struct bitmap *bitmap) } bitmap->allclean = 1; + spin_lock_irqsave(&bitmap->lock, flags); for (j = 0; j < bitmap->chunks; j++) { bitmap_counter_t *bmc; - spin_lock_irqsave(&bitmap->lock, flags); - if (!bitmap->filemap) { + if (!bitmap->filemap) /* error or shutdown */ - spin_unlock_irqrestore(&bitmap->lock, flags); break; - } page = filemap_get_page(bitmap, j); @@ -1121,6 +1119,8 @@ void bitmap_daemon_work(struct bitmap *bitmap) write_page(bitmap, page, 0); bitmap->allclean = 0; } + spin_lock_irqsave(&bitmap->lock, flags); + j |= (PAGE_BITS - 1); continue; } @@ -1181,9 +1181,10 @@ void bitmap_daemon_work(struct bitmap *bitmap) ext2_clear_bit(file_page_offset(j), paddr); kunmap_atomic(paddr, KM_USER0); } - } - spin_unlock_irqrestore(&bitmap->lock, flags); + } else + j |= PAGE_COUNTER_MASK; } + spin_unlock_irqrestore(&bitmap->lock, flags); /* now sync the final page */ if (lastpage != NULL) { From b6a9ce688f613e2ee5f15e6720e0bb8520efc36e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 09:41:17 +1000 Subject: [PATCH 469/670] md: export 'frozen' resync state through sysfs The md resync engine has a 'frozen' state which ensures that no resync/recovery. This is used to avoid races. Export this state through the 'sync_action' sysfs attribute so that user-space can benefit and also avoid some races. Signed-off-by: NeilBrown --- drivers/md/md.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 58e0b02a74c2..384e4f0904c8 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3306,7 +3306,9 @@ static ssize_t action_show(mddev_t *mddev, char *page) { char *type = "idle"; - if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || + if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery)) + type = "frozen"; + else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) || (!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))) { if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) type = "reshape"; @@ -3329,7 +3331,12 @@ action_store(mddev_t *mddev, const char *page, size_t len) if (!mddev->pers || !mddev->pers->sync_request) return -EINVAL; - if (cmd_match(page, "idle")) { + if (cmd_match(page, "frozen")) + set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + else + clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); + + if (cmd_match(page, "idle") || cmd_match(page, "frozen")) { if (mddev->sync_thread) { set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_unregister_thread(mddev->sync_thread); From 848b3182365fdf5a05bcd5ed949071cac2c894b3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:41:08 +1000 Subject: [PATCH 470/670] md: raid5: avoid sector values going negative when testing reshape progress. As sector_t in unsigned, we cannot afford to let 'safepos' etc go negative. So replace a -= b; by a -= min(b,a); Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 4616bc3a6e71..3c3626d2a1f9 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped safepos = conf->reshape_safe; sector_div(safepos, data_disks); if (mddev->delta_disks < 0) { - writepos -= reshape_sectors; + writepos -= min(reshape_sectors, writepos); readpos += reshape_sectors; safepos += reshape_sectors; } else { writepos += reshape_sectors; - readpos -= reshape_sectors; - safepos -= reshape_sectors; + readpos -= min(reshape_sectors, readpos); + safepos -= min(reshape_sectors, safepos); } /* 'writepos' is the most advanced device address we might write. From 7a91ee1f628ef6bfe3f13067c0ddf9db520cb86b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:57:21 +1000 Subject: [PATCH 471/670] md: don't update curr_resync_completed without also updating reshape_position. In order for the metadata to always be consistent, we mustn't updated curr_resync_completed without also updating reshape_position. The reshape code updates both at the same time. However since commit 97e4f42d62badb0f9fbc27c013e89bc1336a03bc the common md_do_sync will sometimes update curr_resync_completed but is not in a position to update reshape_position. So if MD_RECOVERY_RESHAPE is set (indicating that a reshape is happening, so reshape_position might change), don't update curr_resync_completed in md_do_sync, leave it to the per-personality reshape code. Signed-off-by: NeilBrown --- drivers/md/md.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 384e4f0904c8..954456532acc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6362,12 +6362,13 @@ void md_do_sync(mddev_t *mddev) skipped = 0; - if ((mddev->curr_resync > mddev->curr_resync_completed && - (mddev->curr_resync - mddev->curr_resync_completed) - > (max_sectors >> 4)) || - (j - mddev->curr_resync_completed)*2 - >= mddev->resync_max - mddev->curr_resync_completed - ) { + if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && + ((mddev->curr_resync > mddev->curr_resync_completed && + (mddev->curr_resync - mddev->curr_resync_completed) + > (max_sectors >> 4)) || + (j - mddev->curr_resync_completed)*2 + >= mddev->resync_max - mddev->curr_resync_completed + )) { /* time to update curr_resync_completed */ blk_unplug(mddev->queue); wait_event(mddev->recovery_wait, From b492b852cd8c99505708152c29a5e09a787af9de Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 26 May 2009 12:57:36 +1000 Subject: [PATCH 472/670] md: don't use locked_ioctl. md has no need for the BKL - it does its own locking. So md_ioctl doesn't need to be a locked_ioctl. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 954456532acc..641b211fe3fe 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5567,7 +5567,7 @@ static struct block_device_operations md_fops = .owner = THIS_MODULE, .open = md_open, .release = md_release, - .locked_ioctl = md_ioctl, + .ioctl = md_ioctl, .getgeo = md_getgeo, .media_changed = md_media_changed, .revalidate_disk= md_revalidate, From 8e35961b57da14cb64cb0e4e1b7e3aabda6396fe Mon Sep 17 00:00:00 2001 From: Hideo Saito Date: Sun, 24 May 2009 15:33:34 +0000 Subject: [PATCH 473/670] powerpc/mm: Fix broken MMU PID stealing on !SMP The recent rework of the MMU PID handling for non-hash CPUs has a subtle bug in the !SMP "optimized" variant of the PID stealing function. It clears the PID in the mm context before it calls local_flush_tlb_mm(). However, the later will not flush anything if the PID in the context is clear... Signed-off-by: Hideo Saito Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mmu_context_nohash.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index a70e311bd457..030d0005b4d2 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -127,12 +127,12 @@ static unsigned int steal_context_up(unsigned int id) pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm); - /* Mark this mm has having no context anymore */ - mm->context.id = MMU_NO_CONTEXT; - /* Flush the TLB for that context */ local_flush_tlb_mm(mm); + /* Mark this mm has having no context anymore */ + mm->context.id = MMU_NO_CONTEXT; + /* XXX This clear should ultimately be part of local_flush_tlb_mm */ __clear_bit(id, stale_map[cpu]); From 217cbfa856dc1cbc2890781626c4032d9e3ec59f Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 25 May 2009 22:43:49 -0700 Subject: [PATCH 474/670] mac8390: fix regression caused during net_device_ops conversion Changeset ca17584bf2ad1b1e37a5c0e4386728cc5fc9dabc ("mac8390: update to net_device_ops") broke mac8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in mac8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. They seem to be of no value since COMPAT_NET_DEV_OPS is going away soon. Tested with a Kinetics EtherPort card. Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/Makefile | 2 +- drivers/net/mac8390.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 1fc4602a6ff2..a1c25cb4669f 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -102,7 +102,7 @@ obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o -obj-$(CONFIG_MAC8390) += mac8390.o 8390.o +obj-$(CONFIG_MAC8390) += mac8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_HP100) += hp100.o diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index 8e884869a05b..f26667d5eaae 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -304,7 +304,7 @@ struct net_device * __init mac8390_probe(int unit) if (!MACH_IS_MAC) return ERR_PTR(-ENODEV); - dev = alloc_ei_netdev(); + dev = ____alloc_ei_netdev(0); if (!dev) return ERR_PTR(-ENOMEM); @@ -481,10 +481,10 @@ void cleanup_module(void) static const struct net_device_ops mac8390_netdev_ops = { .ndo_open = mac8390_open, .ndo_stop = mac8390_close, - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_multicast_list = ei_set_multicast_list, + .ndo_start_xmit = __ei_start_xmit, + .ndo_tx_timeout = __ei_tx_timeout, + .ndo_get_stats = __ei_get_stats, + .ndo_set_multicast_list = __ei_set_multicast_list, .ndo_validate_addr = eth_validate_addr, .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, From c80a5cdfc5ca6533cb893154f546370da1fdb8f0 Mon Sep 17 00:00:00 2001 From: Doug Leith Date: Mon, 25 May 2009 22:44:59 -0700 Subject: [PATCH 475/670] tcp: tcp_vegas ssthresh bugfix This patch fixes ssthresh accounting issues in tcp_vegas when cwnd decreases Signed-off-by: Doug Leith Signed-off-by: David S. Miller --- net/ipv4/tcp_vegas.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp_vegas.c b/net/ipv4/tcp_vegas.c index a453aac91bd3..c6743eec9b7d 100644 --- a/net/ipv4/tcp_vegas.c +++ b/net/ipv4/tcp_vegas.c @@ -158,6 +158,11 @@ void tcp_vegas_cwnd_event(struct sock *sk, enum tcp_ca_event event) } EXPORT_SYMBOL_GPL(tcp_vegas_cwnd_event); +static inline u32 tcp_vegas_ssthresh(struct tcp_sock *tp) +{ + return min(tp->snd_ssthresh, tp->snd_cwnd-1); +} + static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) { struct tcp_sock *tp = tcp_sk(sk); @@ -221,11 +226,10 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) */ diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT; - if (diff > gamma && tp->snd_ssthresh > 2 ) { + if (diff > gamma && tp->snd_cwnd <= tp->snd_ssthresh) { /* Going too fast. Time to slow down * and switch to congestion avoidance. */ - tp->snd_ssthresh = 2; /* Set cwnd to match the actual rate * exactly: @@ -235,6 +239,7 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) * utilization. */ tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1); + tp->snd_ssthresh = tcp_vegas_ssthresh(tp); } else if (tp->snd_cwnd <= tp->snd_ssthresh) { /* Slow start. */ @@ -250,6 +255,8 @@ static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight) * we slow down. */ tp->snd_cwnd--; + tp->snd_ssthresh + = tcp_vegas_ssthresh(tp); } else if (diff < alpha) { /* We don't have enough extra packets * in the network, so speed up. From 46176b4f6bac19454b7b5c35f68594b85850a600 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 26 May 2009 14:42:40 +0900 Subject: [PATCH 476/670] x86, relocs: ignore R_386_NONE in kernel relocation entries For relocatable 32bit kernels, boot/compressed/relocs.c processes relocation entries in the kernel image and appends it to the kernel image such that boot/compressed/head_32.S can relocate the kernel. The kernel image is one statically linked object and only uses two relocation types - R_386_PC32 and R_386_32, of the two only the latter needs massaging during kernel relocation and thus handled by relocs. R_386_PC32 is ignored and all other relocation types are considered error. When the target of a relocation resides in a discarded section, binutils doesn't throw away the relocation record but nullifies it by changing it to R_386_NONE, which unfortunately makes relocs fail. The problem was triggered by yet out-of-tree x86 stack unwind patches but given the binutils behavior, ignoring R_386_NONE is the right thing to do. The problem has been tracked down to binutils behavior by Jan Beulich. [ Impact: fix build with certain binutils by ignoring R_386_NONE ] Signed-off-by: Tejun Heo Cc: Jan Beulich Cc: Ingo Molnar LKML-Reference: <4A1B8150.40702@kernel.org> Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/relocs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c index 857e492c571e..bbeb0c3fbd90 100644 --- a/arch/x86/boot/compressed/relocs.c +++ b/arch/x86/boot/compressed/relocs.c @@ -504,8 +504,11 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym)) if (sym->st_shndx == SHN_ABS) { continue; } - if (r_type == R_386_PC32) { - /* PC relative relocations don't need to be adjusted */ + if (r_type == R_386_NONE || r_type == R_386_PC32) { + /* + * NONE can be ignored and and PC relative + * relocations don't need to be adjusted. + */ } else if (r_type == R_386_32) { /* Visit relocations that need to be adjusted */ From f11a377b3f4e897d11f0e8d1fc688667e2f19708 Mon Sep 17 00:00:00 2001 From: David Dillow Date: Fri, 22 May 2009 15:29:34 +0000 Subject: [PATCH 477/670] r8169: avoid losing MSI interrupts The 8169 chip only generates MSI interrupts when all enabled event sources are quiescent and one or more sources transition to active. If not all of the active events are acknowledged, or a new event becomes active while the existing ones are cleared in the handler, we will not see a new interrupt. The current interrupt handler masks off the Rx and Tx events once the NAPI handler has been scheduled, which opens a race window in which we can get another Rx or Tx event and never ACK'ing it, stopping all activity until the link is reset (ifconfig down/up). Fix this by always ACK'ing all event sources, and loop in the handler until we have all sources quiescent. Signed-off-by: David Dillow Tested-by: Michael Buesch Signed-off-by: David S. Miller --- drivers/net/r8169.c | 112 ++++++++++++++++++++++++-------------------- 1 file changed, 62 insertions(+), 50 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 0b6e8c896835..8247a945a1d9 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3554,54 +3554,64 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) int handled = 0; int status; + /* loop handling interrupts until we have no new ones or + * we hit a invalid/hotplug case. + */ status = RTL_R16(IntrStatus); + while (status && status != 0xffff) { + handled = 1; - /* hotplug/major error/no more work/shared irq */ - if ((status == 0xffff) || !status) - goto out; - - handled = 1; - - if (unlikely(!netif_running(dev))) { - rtl8169_asic_down(ioaddr); - goto out; - } - - status &= tp->intr_mask; - RTL_W16(IntrStatus, - (status & RxFIFOOver) ? (status | RxOverflow) : status); - - if (!(status & tp->intr_event)) - goto out; - - /* Work around for rx fifo overflow */ - if (unlikely(status & RxFIFOOver) && - (tp->mac_version == RTL_GIGA_MAC_VER_11)) { - netif_stop_queue(dev); - rtl8169_tx_timeout(dev); - goto out; - } - - if (unlikely(status & SYSErr)) { - rtl8169_pcierr_interrupt(dev); - goto out; - } - - if (status & LinkChg) - rtl8169_check_link_status(dev, tp, ioaddr); - - if (status & tp->napi_event) { - RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); - tp->intr_mask = ~tp->napi_event; - - if (likely(napi_schedule_prep(&tp->napi))) - __napi_schedule(&tp->napi); - else if (netif_msg_intr(tp)) { - printk(KERN_INFO "%s: interrupt %04x in poll\n", - dev->name, status); + /* Handle all of the error cases first. These will reset + * the chip, so just exit the loop. + */ + if (unlikely(!netif_running(dev))) { + rtl8169_asic_down(ioaddr); + break; } + + /* Work around for rx fifo overflow */ + if (unlikely(status & RxFIFOOver) && + (tp->mac_version == RTL_GIGA_MAC_VER_11)) { + netif_stop_queue(dev); + rtl8169_tx_timeout(dev); + break; + } + + if (unlikely(status & SYSErr)) { + rtl8169_pcierr_interrupt(dev); + break; + } + + if (status & LinkChg) + rtl8169_check_link_status(dev, tp, ioaddr); + + /* We need to see the lastest version of tp->intr_mask to + * avoid ignoring an MSI interrupt and having to wait for + * another event which may never come. + */ + smp_rmb(); + if (status & tp->intr_mask & tp->napi_event) { + RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event); + tp->intr_mask = ~tp->napi_event; + + if (likely(napi_schedule_prep(&tp->napi))) + __napi_schedule(&tp->napi); + else if (netif_msg_intr(tp)) { + printk(KERN_INFO "%s: interrupt %04x in poll\n", + dev->name, status); + } + } + + /* We only get a new MSI interrupt when all active irq + * sources on the chip have been acknowledged. So, ack + * everything we've seen and check if new sources have become + * active to avoid blocking all interrupts from the chip. + */ + RTL_W16(IntrStatus, + (status & RxFIFOOver) ? (status | RxOverflow) : status); + status = RTL_R16(IntrStatus); } -out: + return IRQ_RETVAL(handled); } @@ -3617,13 +3627,15 @@ static int rtl8169_poll(struct napi_struct *napi, int budget) if (work_done < budget) { napi_complete(napi); - tp->intr_mask = 0xffff; - /* - * 20040426: the barrier is not strictly required but the - * behavior of the irq handler could be less predictable - * without it. Btw, the lack of flush for the posted pci - * write is safe - FR + + /* We need for force the visibility of tp->intr_mask + * for other CPUs, as we can loose an MSI interrupt + * and potentially wait for a retransmit timeout if we don't. + * The posted write to IntrMask is safe, as it will + * eventually make it to the chip and we won't loose anything + * until it does. */ + tp->intr_mask = 0xffff; smp_wmb(); RTL_W16(IntrMask, tp->intr_event); } From 4319503779060120fa5de9b8fde056603bb6e0fd Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Fri, 6 Mar 2009 20:24:57 +0000 Subject: [PATCH 478/670] [CPUFREQ] add atom family to p4-clockmod Some atom procs don't do freq scaling (such as the atom 330 on my own littlefalls2 board). By adding the atom family here, we at least get the benefit of passive cooling in a thermal emergency. Not sure how to see that its actually helping any, but the driver does bind and claim its functioning on my atom 330. Signed-off-by: Jarod Wilson Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/p4-clockmod.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index 6ac55bd341ae..869615193720 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -168,6 +168,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) case 0x0E: /* Core */ case 0x0F: /* Core Duo */ case 0x16: /* Celeron Core */ + case 0x1C: /* Atom */ p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS; return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE); case 0x0D: /* Pentium M (Dothan) */ From d38e73e8dad454a5916f446b0d3523c1161ae95a Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 23 Apr 2009 13:36:12 -0400 Subject: [PATCH 479/670] [CPUFREQ] powernow-k7 build fix when ACPI=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit arch/x86/kernel/cpu/cpufreq/powernow-k7.c:172: warning: 'invalidate_entry' defined but not used Reported-by: Toralf Förster Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k7.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index 3c28ccd49742..a8363e5be4ef 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -168,10 +168,12 @@ static int check_powernow(void) return 1; } +#ifdef CONFIG_X86_POWERNOW_K7_ACPI static void invalidate_entry(unsigned int entry) { powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID; } +#endif static int get_ranges(unsigned char *pst) { From 42a06f2166f2f6f7bf04f32b4e823eacdceafdc9 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:23:52 -0400 Subject: [PATCH 480/670] [CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ The patches linked above depend on the following patch to remove circular locking dependency : cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call (the following issue was faced when using cancel_delayed_work_sync() in the timer teardown (which fixes a race). * KOSAKI Motohiro (kosaki.motohiro@jp.fujitsu.com) wrote: > Hi > > my box output following warnings. > it seems regression by commit 7ccc7608b836e58fbacf65ee4f8eefa288e86fac. > > A: work -> do_dbs_timer() -> cpu_policy_rwsem > B: store() -> cpu_policy_rwsem -> cpufreq_governor_dbs() -> work > > Hrm, I think it must be due to my attempt to fix the timer teardown race in ondemand governor mixed with new locking behavior in 2.6.30-rc. The rwlock seems to be taken around the whole call to cpufreq_governor_dbs(), when it should be only taken around accesses to the locked data, and especially *not* around the call to dbs_timer_exit(). Reverting my fix attempt would put the teardown race back in place (replacing the cancel_delayed_work_sync by cancel_delayed_work). Instead, a proper fix would imply modifying this critical section : cpufreq.c: __cpufreq_remove_dev() ... if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); unlock_policy_rwsem_write(cpu); To make sure the __cpufreq_governor() callback is not called with rwsem held. This would allow execution of cancel_delayed_work_sync() without being nested within the rwsem. Applies on top of the 2.6.30-rc5 tree. Required to remove circular dep in teardown of both conservative and ondemande governors so they can use cancel_delayed_work_sync(). CPUFREQ_GOV_STOP does not modify the policy, therefore this locking seemed unneeded. Signed-off-by: Mathieu Desnoyers CC: KOSAKI Motohiro Cc: Greg KH CC: Ingo Molnar CC: "Rafael J. Wysocki" CC: Ben Slusky CC: Chris Wright CC: Andrew Morton Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index d270e8eb3e67..47d2ad0ae079 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1070,11 +1070,11 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) spin_unlock_irqrestore(&cpufreq_driver_lock, flags); #endif + unlock_policy_rwsem_write(cpu); + if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); - unlock_policy_rwsem_write(cpu); - kobject_put(&data->kobj); /* we need to make sure that the underlying kobj is actually From b253d2b2d28ead6fed012feb54694b3d0562839a Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:29:33 -0400 Subject: [PATCH 481/670] [CPUFREQ] fix timer teardown in conservative governor * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ > (re-send with updated changelog) cpufreq fix timer teardown in conservative governor The problem is that dbs_timer_exit() uses cancel_delayed_work() when it should use cancel_delayed_work_sync(). cancel_delayed_work() does not wait for the workqueue handler to exit. The ondemand governor does not seem to be affected because the "if (!dbs_info->enable)" check at the beginning of the workqueue handler returns immediately without rescheduling the work. The conservative governor in 2.6.30-rc has the same check as the ondemand governor, which makes things usually run smoothly. However, if the governor is quickly stopped and then started, this could lead to the following race : dbs_enable could be reenabled and multiple do_dbs_timer handlers would run. This is why a synchronized teardown is required. Depends on patch cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call The following patch applies to 2.6.30-rc2. Stable kernels have a similar issue which should also be fixed, but the code changed between 2.6.29 and 2.6.30, so this patch only applies to 2.6.30-rc. Signed-off-by: Mathieu Desnoyers CC: Andrew Morton CC: gregkh@suse.de CC: stable@kernel.org CC: cpufreq@vger.kernel.org CC: Ingo Molnar CC: rjw@sisk.pl CC: Ben Slusky Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index 2ecd95e4ab1a..7a74d175287b 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -91,6 +91,9 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */ * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock * is recursive for the same process. -Venki + * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it + * would deadlock with cancel_delayed_work_sync(), which is needed for proper + * raceless workqueue teardown. */ static DEFINE_MUTEX(dbs_mutex); @@ -542,7 +545,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { dbs_info->enable = 0; - cancel_delayed_work(&dbs_info->work); + cancel_delayed_work_sync(&dbs_info->work); } static int cpufreq_governor_dbs(struct cpufreq_policy *policy, From b14893a62c73af0eca414cfed505b8c09efc613c Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Sun, 17 May 2009 10:30:45 -0400 Subject: [PATCH 482/670] [CPUFREQ] fix timer teardown in ondemand governor * Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ > (updated changelog) cpufreq fix timer teardown in ondemand governor The problem is that dbs_timer_exit() uses cancel_delayed_work() when it should use cancel_delayed_work_sync(). cancel_delayed_work() does not wait for the workqueue handler to exit. The ondemand governor does not seem to be affected because the "if (!dbs_info->enable)" check at the beginning of the workqueue handler returns immediately without rescheduling the work. The conservative governor in 2.6.30-rc has the same check as the ondemand governor, which makes things usually run smoothly. However, if the governor is quickly stopped and then started, this could lead to the following race : dbs_enable could be reenabled and multiple do_dbs_timer handlers would run. This is why a synchronized teardown is required. The following patch applies to, at least, 2.6.28.x, 2.6.29.1, 2.6.30-rc2. Depends on patch cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call Signed-off-by: Mathieu Desnoyers CC: Andrew Morton CC: gregkh@suse.de CC: stable@kernel.org CC: cpufreq@vger.kernel.org CC: Ingo Molnar CC: rjw@sisk.pl CC: Ben Slusky Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_ondemand.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 338f428a15b7..e741c339df76 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -98,6 +98,9 @@ static unsigned int dbs_enable; /* number of CPUs using this policy */ * (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then * cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock * is recursive for the same process. -Venki + * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it + * would deadlock with cancel_delayed_work_sync(), which is needed for proper + * raceless workqueue teardown. */ static DEFINE_MUTEX(dbs_mutex); @@ -562,7 +565,7 @@ static inline void dbs_timer_init(struct cpu_dbs_info_s *dbs_info) static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info) { dbs_info->enable = 0; - cancel_delayed_work(&dbs_info->work); + cancel_delayed_work_sync(&dbs_info->work); } static int cpufreq_governor_dbs(struct cpufreq_policy *policy, From df1829770db415dc5a5ed5ada3bd70176c6f0a01 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Wed, 22 Apr 2009 13:48:32 +0200 Subject: [PATCH 483/670] [CPUFREQ] powernow-k8 cleanup msg if BIOS does not export ACPI _PSS cpufreq data - Make the message shorter and easier to grep for - Use printk_once instead of WARN_ONCE (functionality of these was mixed) Signed-off-by: Thomas Renninger Cc: Langsdorf, Mark Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 4709ead2db52..feef10c085a1 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1215,13 +1215,16 @@ static int powernowk8_verify(struct cpufreq_policy *pol) return cpufreq_frequency_table_verify(pol, data->powernow_table); } +static const char ACPI_PSS_BIOS_BUG_MSG[] = + KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n" + KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n"; + /* per CPU init entry point to the driver */ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) { struct powernow_k8_data *data; cpumask_t oldmask; int rc; - static int print_once; if (!cpu_online(pol->cpu)) return -ENODEV; @@ -1244,19 +1247,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { - /* - * Replace this one with print_once as soon as such a - * thing gets introduced - */ - if (!print_once) { - WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS " - "does not provide ACPI _PSS objects " - "in a way that Linux understands. " - "Please report this to the Linux ACPI" - " maintainers and complain to your " - "BIOS vendor.\n"); - print_once++; - } + printk_once(ACPI_PSS_BIOS_BUG_MSG); goto err_out; } if (pol->cpu != 0) { From ca446d06351992e4f1a7c1e5e99870ab4ec5188f Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 22 Apr 2009 13:48:33 +0200 Subject: [PATCH 484/670] [CPUFREQ] powernow-k8: determine exact CPU frequency for HW Pstates Slightly modified by trenn@suse.de -> only do this on fam 10h and fam 11h. Currently powernow-k8 determines CPU frequency from ACPI PSS objects, but according to AMD family 11h BKDG this frequency is just a rounded value: "CoreFreq (MHz) = The CPU COF specified by MSRC001_00[6B:64][CpuFid] rounded to the nearest 100 Mhz." As a consequnce powernow-k8 reports wrong CPU frequency on some systems, e.g. on Turion X2 Ultra: powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 1 (1100 MHz) powernow-k8: 2 : pstate 2 (600 MHz) But this is wrong as frequency for Pstate2 is 550 MHz. x86info reports it correctly: #x86info -a |grep Pstate ... Pstate-0: fid=e, did=0, vid=24 (2200MHz) Pstate-1: fid=e, did=1, vid=30 (1100MHz) Pstate-2: fid=e, did=2, vid=3c (550MHz) (current) Solution is to determine the frequency directly from Pstate MSRs instead of using rounded values from ACPI table. Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Renninger Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index feef10c085a1..f6b32d112357 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -649,6 +649,20 @@ static void print_basics(struct powernow_k8_data *data) data->batps); } +static u32 freq_from_fid_did(u32 fid, u32 did) +{ + u32 mhz = 0; + + if (boot_cpu_data.x86 == 0x10) + mhz = (100 * (fid + 0x10)) >> did; + else if (boot_cpu_data.x86 == 0x11) + mhz = (100 * (fid + 8)) >> did; + else + BUG(); + + return mhz * 1000; +} + static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst, u8 maxvid) { @@ -923,8 +937,13 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, powernow_table[i].index = index; - powernow_table[i].frequency = - data->acpi_data.states[i].core_frequency * 1000; + /* Frequency may be rounded for these */ + if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) { + powernow_table[i].frequency = + freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7); + } else + powernow_table[i].frequency = + data->acpi_data.states[i].core_frequency * 1000; } return 0; } From e4a5d54f924ea5ce2913d9d0687d034004816465 Mon Sep 17 00:00:00 2001 From: Ma Ling Date: Tue, 26 May 2009 11:31:00 +0800 Subject: [PATCH 485/670] drm/i915: Add support for VGA load detection (pre-945). Two approaches for VGA detections: hot plug detection for 945G onwards and load pipe detection for Pre-945G. Load pipe detection will get one free pipe, set border color as red and blue, then check CRT status by swf register. This is a sync-up with the 2D driver. Signed-off-by: Ma Ling Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 149 ++++++++++++++++++++++++++++++- 1 file changed, 147 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 19148c3df637..640f5158effc 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -198,9 +198,142 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector) return intel_ddc_probe(intel_output); } +static enum drm_connector_status +intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output) +{ + struct drm_encoder *encoder = &intel_output->enc; + struct drm_device *dev = encoder->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + uint32_t pipe = intel_crtc->pipe; + uint32_t save_bclrpat; + uint32_t save_vtotal; + uint32_t vtotal, vactive; + uint32_t vsample; + uint32_t vblank, vblank_start, vblank_end; + uint32_t dsl; + uint32_t bclrpat_reg; + uint32_t vtotal_reg; + uint32_t vblank_reg; + uint32_t vsync_reg; + uint32_t pipeconf_reg; + uint32_t pipe_dsl_reg; + uint8_t st00; + enum drm_connector_status status; + + if (pipe == 0) { + bclrpat_reg = BCLRPAT_A; + vtotal_reg = VTOTAL_A; + vblank_reg = VBLANK_A; + vsync_reg = VSYNC_A; + pipeconf_reg = PIPEACONF; + pipe_dsl_reg = PIPEADSL; + } else { + bclrpat_reg = BCLRPAT_B; + vtotal_reg = VTOTAL_B; + vblank_reg = VBLANK_B; + vsync_reg = VSYNC_B; + pipeconf_reg = PIPEBCONF; + pipe_dsl_reg = PIPEBDSL; + } + + save_bclrpat = I915_READ(bclrpat_reg); + save_vtotal = I915_READ(vtotal_reg); + vblank = I915_READ(vblank_reg); + + vtotal = ((save_vtotal >> 16) & 0xfff) + 1; + vactive = (save_vtotal & 0x7ff) + 1; + + vblank_start = (vblank & 0xfff) + 1; + vblank_end = ((vblank >> 16) & 0xfff) + 1; + + /* Set the border color to purple. */ + I915_WRITE(bclrpat_reg, 0x500050); + + if (IS_I9XX(dev)) { + uint32_t pipeconf = I915_READ(pipeconf_reg); + I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER); + /* Wait for next Vblank to substitue + * border color for Color info */ + intel_wait_for_vblank(dev); + st00 = I915_READ8(VGA_MSR_WRITE); + status = ((st00 & (1 << 4)) != 0) ? + connector_status_connected : + connector_status_disconnected; + + I915_WRITE(pipeconf_reg, pipeconf); + } else { + bool restore_vblank = false; + int count, detect; + + /* + * If there isn't any border, add some. + * Yes, this will flicker + */ + if (vblank_start <= vactive && vblank_end >= vtotal) { + uint32_t vsync = I915_READ(vsync_reg); + uint32_t vsync_start = (vsync & 0xffff) + 1; + + vblank_start = vsync_start; + I915_WRITE(vblank_reg, + (vblank_start - 1) | + ((vblank_end - 1) << 16)); + restore_vblank = true; + } + /* sample in the vertical border, selecting the larger one */ + if (vblank_start - vactive >= vtotal - vblank_end) + vsample = (vblank_start + vactive) >> 1; + else + vsample = (vtotal + vblank_end) >> 1; + + /* + * Wait for the border to be displayed + */ + while (I915_READ(pipe_dsl_reg) >= vactive) + ; + while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample) + ; + /* + * Watch ST00 for an entire scanline + */ + detect = 0; + count = 0; + do { + count++; + /* Read the ST00 VGA status register */ + st00 = I915_READ8(VGA_MSR_WRITE); + if (st00 & (1 << 4)) + detect++; + } while ((I915_READ(pipe_dsl_reg) == dsl)); + + /* restore vblank if necessary */ + if (restore_vblank) + I915_WRITE(vblank_reg, vblank); + /* + * If more than 3/4 of the scanline detected a monitor, + * then it is assumed to be present. This works even on i830, + * where there isn't any way to force the border color across + * the screen + */ + status = detect * 4 > count * 3 ? + connector_status_connected : + connector_status_disconnected; + } + + /* Restore previous settings */ + I915_WRITE(bclrpat_reg, save_bclrpat); + + return status; +} + static enum drm_connector_status intel_crt_detect(struct drm_connector *connector) { struct drm_device *dev = connector->dev; + struct intel_output *intel_output = to_intel_output(connector); + struct drm_encoder *encoder = &intel_output->enc; + struct drm_crtc *crtc; + int dpms_mode; + enum drm_connector_status status; if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) { if (intel_crt_detect_hotplug(connector)) @@ -212,8 +345,20 @@ static enum drm_connector_status intel_crt_detect(struct drm_connector *connecto if (intel_crt_detect_ddc(connector)) return connector_status_connected; - /* TODO use load detect */ - return connector_status_unknown; + /* for pre-945g platforms use load detect */ + if (encoder->crtc && encoder->crtc->enabled) { + status = intel_crt_load_detect(encoder->crtc, intel_output); + } else { + crtc = intel_get_load_detect_pipe(intel_output, + NULL, &dpms_mode); + if (crtc) { + status = intel_crt_load_detect(crtc, intel_output); + intel_release_load_detect_pipe(intel_output, dpms_mode); + } else + status = connector_status_unknown; + } + + return status; } static void intel_crt_destroy(struct drm_connector *connector) From 68743082b560067e3e93eab8b2568f238e486865 Mon Sep 17 00:00:00 2001 From: Vu Pham Date: Tue, 26 May 2009 14:51:00 -0400 Subject: [PATCH 486/670] XPRTRDMA: fix client rpcrdma FRMR registration on mlx4 devices mlx4/connectX FRMR requires local write enable together with remote rdma write enable. This fixes NFS/RDMA operation over the ConnectX Infiniband HCA in the default memreg mode. Signed-off-by: Vu Pham Signed-off-by: Tom Talpey Signed-off-by: Trond Myklebust --- net/sunrpc/xprtrdma/verbs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 3b21e0cc5e69..465aafc2007f 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -1495,7 +1495,8 @@ rpcrdma_register_frmr_external(struct rpcrdma_mr_seg *seg, frmr_wr.wr.fast_reg.page_shift = PAGE_SHIFT; frmr_wr.wr.fast_reg.length = i << PAGE_SHIFT; frmr_wr.wr.fast_reg.access_flags = (writing ? - IB_ACCESS_REMOTE_WRITE : IB_ACCESS_REMOTE_READ); + IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE : + IB_ACCESS_REMOTE_READ); frmr_wr.wr.fast_reg.rkey = seg1->mr_chunk.rl_mw->r.frmr.fr_mr->rkey; DECR_CQCOUNT(&r_xprt->rx_ep); From d0367a508af9cf97beb202935bb9ad8883d30cd1 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Tue, 26 May 2009 14:51:00 -0400 Subject: [PATCH 487/670] nfs: fix build error in nfsroot with initconst fix build error with latest kbuild adjustments to initconst. The commit a447c0932445f92ce6f4c1bd020f62c5097a7842 ("vfs: Use const for kernel parser table") changed: static match_table_t __initdata tokens = { to static match_table_t __initconst tokens = { But the missing const causes popwerpc to fail with latest updates to __initconst like this: fs/nfs/nfsroot.c:400: error: __setup_str_nfs_root_setup causes a section type conflict fs/nfs/nfsroot.c:400: error: __setup_str_nfs_root_setup causes a section type conflict The bug is only present with kbuild-next. Following patch has been build tested. Signed-off-by: Sam Ravnborg Cc: Steven Whitehouse Cc: Stephen Rothwell Acked-by: Jan Beulich Signed-off-by: Trond Myklebust --- fs/nfs/nfsroot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c index d9ef602fbc5a..e3ed5908820b 100644 --- a/fs/nfs/nfsroot.c +++ b/fs/nfs/nfsroot.c @@ -129,7 +129,7 @@ enum { Opt_err }; -static match_table_t __initconst tokens = { +static const match_table_t tokens __initconst = { {Opt_port, "port=%u"}, {Opt_rsize, "rsize=%u"}, {Opt_wsize, "wsize=%u"}, From 95baa25c7321eb8613246acbf61b97911cc748d3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 26 May 2009 14:51:00 -0400 Subject: [PATCH 488/670] NFSv4: Fix the case where NFSv4 renewal fails If the asynchronous lease renewal fails (usually due to a soft timeout), then we _must_ schedule state recovery in order to ensure that we don't lose the lease unnecessarily or, if the lease is already lost, that we recover the locking state promptly... Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index a4d242680299..4674f8092da8 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2594,12 +2594,9 @@ static void nfs4_renew_done(struct rpc_task *task, void *data) unsigned long timestamp = (unsigned long)data; if (task->tk_status < 0) { - switch (task->tk_status) { - case -NFS4ERR_STALE_CLIENTID: - case -NFS4ERR_EXPIRED: - case -NFS4ERR_CB_PATH_DOWN: - nfs4_schedule_state_recovery(clp); - } + /* Unless we're shutting down, schedule state recovery! */ + if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0) + nfs4_schedule_state_recovery(clp); return; } spin_lock(&clp->cl_lock); From ab2b7ebaad16226c9a5e85c5f384d19fa58a7459 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Tue, 26 May 2009 09:11:03 +0100 Subject: [PATCH 489/670] kmod: Release sub_info on cred allocation failure. call_usermodehelper_setup() forgot to kfree(sub_info) when prepare_usermodehelper_creds() failed. Signed-off-by: Tetsuo Handa Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- kernel/kmod.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/kmod.c b/kernel/kmod.c index b750675251e5..7e95bedb2bfc 100644 --- a/kernel/kmod.c +++ b/kernel/kmod.c @@ -370,8 +370,10 @@ struct subprocess_info *call_usermodehelper_setup(char *path, char **argv, sub_info->argv = argv; sub_info->envp = envp; sub_info->cred = prepare_usermodehelper_creds(); - if (!sub_info->cred) + if (!sub_info->cred) { + kfree(sub_info); return NULL; + } out: return sub_info; From 564346224daaa8f7222d7a92cdbb7bafde59ae6e Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 26 May 2009 20:54:41 +0930 Subject: [PATCH 490/670] lguest: fix on Intel when KVM loaded (unhandled trap 13) When KVM is loaded, and hence VT set up, the vmcall instruction in an lguest guest causes a #GP, not #UD. Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- drivers/lguest/x86/core.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index 1a83910f674f..eaf722fe309a 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -358,6 +358,16 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu) if (emulate_insn(cpu)) return; } + /* If KVM is active, the vmcall instruction triggers a + * General Protection Fault. Normally it triggers an + * invalid opcode fault (6): */ + case 6: + /* We need to check if ring == GUEST_PL and + * faulting instruction == vmcall. */ + if (is_hypercall(cpu)) { + rewrite_hypercall(cpu); + return; + } break; case 14: /* We've intercepted a Page Fault. */ /* The Guest accessed a virtual address that wasn't mapped. @@ -403,15 +413,6 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu) * up the pointer now to indicate a hypercall is pending. */ cpu->hcall = (struct hcall_args *)cpu->regs; return; - case 6: - /* kvm hypercalls trigger an invalid opcode fault (6). - * We need to check if ring == GUEST_PL and - * faulting instruction == vmcall. */ - if (is_hypercall(cpu)) { - rewrite_hypercall(cpu); - return; - } - break; } /* We didn't handle the trap, so it needs to go to the Guest. */ From 2171787be2e71ff71159857bfeb21398b61eb615 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Tue, 26 May 2009 10:33:35 -0700 Subject: [PATCH 491/670] x86: avoid back to back on_each_cpu in cpa_flush_array Cleanup cpa_flush_array() to avoid back to back on_each_cpu() calls. [ Impact: optimizes fix 0af48f42df15b97080b450d24219dd95db7b929a ] Signed-off-by: Venkatesh Pallipadi Signed-off-by: H. Peter Anvin --- arch/x86/mm/pageattr.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 0f9052bcec4b..e17efed088c5 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -204,30 +204,19 @@ static void cpa_flush_range(unsigned long start, int numpages, int cache) } } -static void wbinvd_local(void *unused) -{ - wbinvd(); -} - static void cpa_flush_array(unsigned long *start, int numpages, int cache, int in_flags, struct page **pages) { unsigned int i, level; + unsigned long do_wbinvd = cache && numpages >= 1024; /* 4M threshold */ BUG_ON(irqs_disabled()); - on_each_cpu(__cpa_flush_range, NULL, 1); + on_each_cpu(__cpa_flush_all, (void *) do_wbinvd, 1); - if (!cache) + if (!cache || do_wbinvd) return; - /* 4M threshold */ - if (numpages >= 1024) { - if (boot_cpu_data.x86 >= 4) - on_each_cpu(wbinvd_local, NULL, 1); - - return; - } /* * We only need to flush on one CPU, * clflush is a MESI-coherent instruction that From b1338d199dda6681d9af0297928af0a7eb9cba7b Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Tue, 26 May 2009 12:15:53 +0900 Subject: [PATCH 492/670] tomoyo: add missing call to cap_bprm_set_creds cap_bprm_set_creds() has to be called from security_bprm_set_creds(). TOMOYO forgot to call cap_bprm_set_creds() from tomoyo_bprm_set_creds() and suid executables were not being working. Make sure we call cap_bprm_set_creds() with TOMOYO, to set credentials properly inside tomoyo_bprm_set_creds(). Signed-off-by: Herton Ronaldo Krzesinski Acked-by: Tetsuo Handa Signed-off-by: James Morris --- security/tomoyo/tomoyo.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/security/tomoyo/tomoyo.c b/security/tomoyo/tomoyo.c index 5b481912752a..e42be5c4f055 100644 --- a/security/tomoyo/tomoyo.c +++ b/security/tomoyo/tomoyo.c @@ -27,6 +27,12 @@ static int tomoyo_cred_prepare(struct cred *new, const struct cred *old, static int tomoyo_bprm_set_creds(struct linux_binprm *bprm) { + int rc; + + rc = cap_bprm_set_creds(bprm); + if (rc) + return rc; + /* * Do only if this function is called for the first time of an execve * operation. From e76a16deb8785317a23cca7204331af053e0fb4e Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 May 2009 17:44:56 -0700 Subject: [PATCH 493/670] drm/i915: Fix tiling pitch handling on 8xx. The pitch field is an exponent on pre-965, so we were rejecting buffers on 8xx that we shouldn't have. 915 got lucky in that the largest legal value happened to match (8KB / 512 = 0x10), but 8xx has a smaller tile width. Additionally, we programmed that bad value into the register on 8xx, so the only pitch that would work correctly was 4096 (512-1023 pixels), while others would probably give bad rendering or hangs. Signed-off-by: Eric Anholt fd.o bug #20473. --- drivers/gpu/drm/i915/i915_gem.c | 6 ++++-- drivers/gpu/drm/i915/i915_gem_tiling.c | 14 +++++++++++--- drivers/gpu/drm/i915/i915_reg.h | 3 ++- 3 files changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 717b6a854bcd..e4408daf8cef 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2128,8 +2128,10 @@ static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) return; } - pitch_val = (obj_priv->stride / 128) - 1; - WARN_ON(pitch_val & ~0x0000000f); + pitch_val = obj_priv->stride / 128; + pitch_val = ffs(pitch_val) - 1; + WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL); + val = obj_priv->gtt_offset; if (obj_priv->tiling_mode == I915_TILING_Y) val |= 1 << I830_FENCE_TILING_Y_SHIFT; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 52a059354e83..540dd336e6ec 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -213,7 +213,8 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (tiling_mode == I915_TILING_NONE) return true; - if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)) + if (!IS_I9XX(dev) || + (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) tile_width = 128; else tile_width = 512; @@ -225,11 +226,18 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) if (stride / 128 > I965_FENCE_MAX_PITCH_VAL) return false; } else if (IS_I9XX(dev)) { - if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL || + uint32_t pitch_val = ffs(stride / tile_width) - 1; + + /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB) + * instead of 4 (2KB) on 945s. + */ + if (pitch_val > I915_FENCE_MAX_PITCH_VAL || size > (I830_FENCE_MAX_SIZE_VAL << 20)) return false; } else { - if (stride / 128 > I830_FENCE_MAX_PITCH_VAL || + uint32_t pitch_val = ffs(stride / tile_width) - 1; + + if (pitch_val > I830_FENCE_MAX_PITCH_VAL || size > (I830_FENCE_MAX_SIZE_VAL << 19)) return false; } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 9668cc0d7f4e..375569d01d01 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -190,7 +190,8 @@ #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) #define I830_FENCE_PITCH_SHIFT 4 #define I830_FENCE_REG_VALID (1<<0) -#define I830_FENCE_MAX_PITCH_VAL 0x10 +#define I915_FENCE_MAX_PITCH_VAL 0x10 +#define I830_FENCE_MAX_PITCH_VAL 6 #define I830_FENCE_MAX_SIZE_VAL (1<<8) #define I915_FENCE_START_MASK 0x0ff00000 From cfa16a0de5392c54db553ec2233a7110e4b4da7a Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 26 May 2009 18:46:16 -0700 Subject: [PATCH 494/670] drm/i915: Apply a big hammer to 865 GEM object CPU cache flushing. On the 865, but not the 855, the clflush we do appears to not actually make it out to the hardware all the time. An easy way to safely reproduce was X -retro, which would show that some of the blits involved in drawing the lovely root weave didn't make it out to the hardware. Those blits are 32 bytes each, and 1-2 would be missing at various points around the screen. Other experimentation (doing more clflush, doing more AGP chipset flush, poking at some more device registers to maybe trigger more flushing) didn't help. krh came up with the wbinvd as a way to successfully get all those blits to appear. Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e4408daf8cef..e2421869a40c 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2423,6 +2423,16 @@ i915_gem_clflush_object(struct drm_gem_object *obj) if (obj_priv->pages == NULL) return; + /* XXX: The 865 in particular appears to be weird in how it handles + * cache flushing. We haven't figured it out, but the + * clflush+agp_chipset_flush doesn't appear to successfully get the + * data visible to the PGU, while wbinvd + agp_chipset_flush does. + */ + if (IS_I865G(obj->dev)) { + wbinvd(); + return; + } + drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE); } From 84532a0fc3d5811dca8e3726fe4d372ea87bd7c6 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 May 2009 13:33:14 +1000 Subject: [PATCH 495/670] Revert "powerpc: Rework dma-noncoherent to use generic vmalloc layer" This reverts commit 33f00dcedb0e22cdb156a23632814fc580fcfcf8. While it was a good idea to try to use the mm/vmalloc.c allocator instead of our own (in fact, ours is itself a dup on an old variant of the vmalloc one), unfortunately, the approach is terminally busted since dma_alloc_coherent() can be called at interrupt time or in atomic contexts and there's little chances we'll make the code in mm/vmalloc.c cope with\ that :-( Until we can get the generic code to forbid that idiocy and fix all drivers abusing it, we pretty much have no choice but revert to our custom virtual space allocator. There's also a problem with SMP safety since freeing such mapping would require an IPI which cannot be done at interrupt time. However, right now, I don't think we support any platform that is both SMP and has non-coherent DMA (don't laugh, I know such things do exist !) so we can sort that out later. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 25 +++ arch/powerpc/lib/dma-noncoherent.c | 299 +++++++++++++++++++++++------ 2 files changed, 269 insertions(+), 55 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a0d1146a0578..3bb43adce44d 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -868,6 +868,31 @@ config TASK_SIZE default "0x80000000" if PPC_PREP || PPC_8xx default "0xc0000000" +config CONSISTENT_START_BOOL + bool "Set custom consistent memory pool address" + depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE + help + This option allows you to set the base virtual address + of the consistent memory pool. This pool of virtual + memory is used to make consistent memory allocations. + +config CONSISTENT_START + hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL + default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx) + default "0xff100000" if NOT_COHERENT_CACHE + +config CONSISTENT_SIZE_BOOL + bool "Set custom consistent memory pool size" + depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE + help + This option allows you to set the size of the + consistent memory pool. This pool of virtual memory + is used to make consistent memory allocations. + +config CONSISTENT_SIZE + hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL + default "0x00200000" if NOT_COHERENT_CACHE + config PIN_TLB bool "Pinned Kernel TLBs (860 ONLY)" depends on ADVANCED_OPTIONS && 8xx diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c index 005a28d380af..b7dc4c19f582 100644 --- a/arch/powerpc/lib/dma-noncoherent.c +++ b/arch/powerpc/lib/dma-noncoherent.c @@ -29,10 +29,120 @@ #include #include #include -#include #include +/* + * This address range defaults to a value that is safe for all + * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It + * can be further configured for specific applications under + * the "Advanced Setup" menu. -Matt + */ +#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) +#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) + +/* + * This is the page table (2MB) covering uncached, DMA consistent allocations + */ +static pte_t *consistent_pte; +static DEFINE_SPINLOCK(consistent_lock); + +/* + * VM region handling support. + * + * This should become something generic, handling VM region allocations for + * vmalloc and similar (ioremap, module space, etc). + * + * I envisage vmalloc()'s supporting vm_struct becoming: + * + * struct vm_struct { + * struct vm_region region; + * unsigned long flags; + * struct page **pages; + * unsigned int nr_pages; + * unsigned long phys_addr; + * }; + * + * get_vm_area() would then call vm_region_alloc with an appropriate + * struct vm_region head (eg): + * + * struct vm_region vmalloc_head = { + * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list), + * .vm_start = VMALLOC_START, + * .vm_end = VMALLOC_END, + * }; + * + * However, vmalloc_head.vm_start is variable (typically, it is dependent on + * the amount of RAM found at boot time.) I would imagine that get_vm_area() + * would have to initialise this each time prior to calling vm_region_alloc(). + */ +struct ppc_vm_region { + struct list_head vm_list; + unsigned long vm_start; + unsigned long vm_end; +}; + +static struct ppc_vm_region consistent_head = { + .vm_list = LIST_HEAD_INIT(consistent_head.vm_list), + .vm_start = CONSISTENT_BASE, + .vm_end = CONSISTENT_END, +}; + +static struct ppc_vm_region * +ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp) +{ + unsigned long addr = head->vm_start, end = head->vm_end - size; + unsigned long flags; + struct ppc_vm_region *c, *new; + + new = kmalloc(sizeof(struct ppc_vm_region), gfp); + if (!new) + goto out; + + spin_lock_irqsave(&consistent_lock, flags); + + list_for_each_entry(c, &head->vm_list, vm_list) { + if ((addr + size) < addr) + goto nospc; + if ((addr + size) <= c->vm_start) + goto found; + addr = c->vm_end; + if (addr > end) + goto nospc; + } + + found: + /* + * Insert this entry _before_ the one we found. + */ + list_add_tail(&new->vm_list, &c->vm_list); + new->vm_start = addr; + new->vm_end = addr + size; + + spin_unlock_irqrestore(&consistent_lock, flags); + return new; + + nospc: + spin_unlock_irqrestore(&consistent_lock, flags); + kfree(new); + out: + return NULL; +} + +static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr) +{ + struct ppc_vm_region *c; + + list_for_each_entry(c, &head->vm_list, vm_list) { + if (c->vm_start == addr) + goto out; + } + c = NULL; + out: + return c; +} + /* * Allocate DMA-coherent memory space and return both the kernel remapped * virtual and bus address for that space. @@ -41,21 +151,21 @@ void * __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) { struct page *page; + struct ppc_vm_region *c; unsigned long order; - int i; - unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT; - unsigned int array_size = nr_pages * sizeof(struct page *); - struct page **pages; - struct page *end; u64 mask = 0x00ffffff, limit; /* ISA default */ - struct vm_struct *area; - BUG_ON(!mem_init_done); + if (!consistent_pte) { + printk(KERN_ERR "%s: not initialised\n", __func__); + dump_stack(); + return NULL; + } + size = PAGE_ALIGN(size); limit = (mask + 1) & ~mask; - if (limit && size >= limit) { - printk(KERN_WARNING "coherent allocation too big (requested " - "%#x mask %#Lx)\n", size, mask); + if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { + printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", + size, mask); return NULL; } @@ -68,8 +178,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) if (!page) goto no_page; - end = page + (1 << order); - /* * Invalidate any data that might be lurking in the * kernel direct-mapped region for device DMA. @@ -80,59 +188,48 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) flush_dcache_range(kaddr, kaddr + size); } - split_page(page, order); - /* - * Set the "dma handle" + * Allocate a virtual address in the consistent mapping region. */ - *handle = page_to_phys(page); + c = ppc_vm_region_alloc(&consistent_head, size, + gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + if (c) { + unsigned long vaddr = c->vm_start; + pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); + struct page *end = page + (1 << order); - area = get_vm_area_caller(size, VM_IOREMAP, - __builtin_return_address(1)); - if (!area) - goto out_free_pages; + split_page(page, order); - if (array_size > PAGE_SIZE) { - pages = vmalloc(array_size); - area->flags |= VM_VPAGES; - } else { - pages = kmalloc(array_size, GFP_KERNEL); - } - if (!pages) - goto out_free_area; + /* + * Set the "dma handle" + */ + *handle = page_to_phys(page); - area->pages = pages; - area->nr_pages = nr_pages; + do { + BUG_ON(!pte_none(*pte)); - for (i = 0; i < nr_pages; i++) - pages[i] = page + i; + SetPageReserved(page); + set_pte_at(&init_mm, vaddr, + pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); + page++; + pte++; + vaddr += PAGE_SIZE; + } while (size -= PAGE_SIZE); - if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages)) - goto out_unmap; + /* + * Free the otherwise unused pages. + */ + while (page < end) { + __free_page(page); + page++; + } - /* - * Free the otherwise unused pages. - */ - page += nr_pages; - while (page < end) { - __free_page(page); - page++; + return (void *)c->vm_start; } - return area->addr; -out_unmap: - vunmap(area->addr); - if (array_size > PAGE_SIZE) - vfree(pages); - else - kfree(pages); - goto out_free_pages; -out_free_area: - free_vm_area(area); -out_free_pages: if (page) __free_pages(page, order); -no_page: + no_page: return NULL; } EXPORT_SYMBOL(__dma_alloc_coherent); @@ -142,11 +239,103 @@ EXPORT_SYMBOL(__dma_alloc_coherent); */ void __dma_free_coherent(size_t size, void *vaddr) { - vfree(vaddr); + struct ppc_vm_region *c; + unsigned long flags, addr; + pte_t *ptep; + size = PAGE_ALIGN(size); + + spin_lock_irqsave(&consistent_lock, flags); + + c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr); + if (!c) + goto no_area; + + if ((c->vm_end - c->vm_start) != size) { + printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n", + __func__, c->vm_end - c->vm_start, size); + dump_stack(); + size = c->vm_end - c->vm_start; + } + + ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); + addr = c->vm_start; + do { + pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); + unsigned long pfn; + + ptep++; + addr += PAGE_SIZE; + + if (!pte_none(pte) && pte_present(pte)) { + pfn = pte_pfn(pte); + + if (pfn_valid(pfn)) { + struct page *page = pfn_to_page(pfn); + ClearPageReserved(page); + + __free_page(page); + continue; + } + } + + printk(KERN_CRIT "%s: bad page in kernel page table\n", + __func__); + } while (size -= PAGE_SIZE); + + flush_tlb_kernel_range(c->vm_start, c->vm_end); + + list_del(&c->vm_list); + + spin_unlock_irqrestore(&consistent_lock, flags); + + kfree(c); + return; + + no_area: + spin_unlock_irqrestore(&consistent_lock, flags); + printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n", + __func__, vaddr); + dump_stack(); } EXPORT_SYMBOL(__dma_free_coherent); +/* + * Initialise the consistent memory allocation. + */ +static int __init dma_alloc_init(void) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + int ret = 0; + + do { + pgd = pgd_offset(&init_mm, CONSISTENT_BASE); + pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE); + pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE); + if (!pmd) { + printk(KERN_ERR "%s: no pmd tables\n", __func__); + ret = -ENOMEM; + break; + } + + pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); + if (!pte) { + printk(KERN_ERR "%s: no pte tables\n", __func__); + ret = -ENOMEM; + break; + } + + consistent_pte = pte; + } while (0); + + return ret; +} + +core_initcall(dma_alloc_init); + /* * make an area consistent. */ From 87ad57bacb25c3f24c54f142ef445f68277705f0 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 19 May 2009 16:09:42 +0800 Subject: [PATCH 496/670] cpuidle: makes AMD C1E work in acpi_idle When AMD C1E is enabled, local APIC timer will stop even in C1. This patch uses broadcast IPI to replace local APIC timer in C1. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid boot hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn Signed-off-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 72069ba5f1ed..6b7bcc7e3e1d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -148,6 +148,9 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr, if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) return; + if (boot_cpu_has(X86_FEATURE_AMDC1E)) + type = ACPI_STATE_C1; + /* * Check, if one of the previous states already marked the lapic * unstable @@ -611,6 +614,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; + acpi_timer_check_state(i, pr, cx); break; case ACPI_STATE_C2: @@ -835,6 +839,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, return 0; } + acpi_state_timer_broadcast(pr, cx, 1); kt1 = ktime_get_real(); acpi_idle_do_entry(cx); kt2 = ktime_get_real(); @@ -842,6 +847,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, local_irq_enable(); cx->usage++; + acpi_state_timer_broadcast(pr, cx, 0); return idle_time; } From 7d60e8ab0d5507229dfbdf456501cc378610fa01 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 19 May 2009 16:09:54 +0800 Subject: [PATCH 497/670] cpuidle: fix AMD C1E suspend hang When AMD C1E is enabled, local APIC timer will stop even in C1. To avoid suspend/resume hang, this patch removes C1 and replace it with a cpu_relax() in suspend/resume path. This hasn't any impact in runtime path. http://bugzilla.kernel.org/show_bug.cgi?id=13233 [ impact: avoid suspend/resume hang in AMD CPU with C1E enabled ] Tested-by: Dmitry Lyzhyn Signed-off-by: Shaohua Li Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6b7bcc7e3e1d..10a2d913635a 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -834,8 +834,8 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, /* Do not access any ACPI IO ports in suspend path */ if (acpi_idle_suspend) { - acpi_safe_halt(); local_irq_enable(); + cpu_relax(); return 0; } From e65fcfd63a9a62baa5708484ff8edbe56eb3e7ec Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Tue, 26 May 2009 20:47:02 -0700 Subject: [PATCH 498/670] cls_cgroup: read classid atomically in classifier Avoid reading the unsynchronized value cs->classid multiple times, since it could change concurrently from non-zero to zero; this would result in the classifier returning a positive result with a bogus (zero) classid. Signed-off-by: Paul Menage Reviewed-by: Li Zefan Signed-off-by: David S. Miller --- net/sched/cls_cgroup.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/net/sched/cls_cgroup.c b/net/sched/cls_cgroup.c index 91a3db4a76f8..cc29b44b1500 100644 --- a/net/sched/cls_cgroup.c +++ b/net/sched/cls_cgroup.c @@ -104,8 +104,7 @@ static int cls_cgroup_classify(struct sk_buff *skb, struct tcf_proto *tp, struct tcf_result *res) { struct cls_cgroup_head *head = tp->root; - struct cgroup_cls_state *cs; - int ret = 0; + u32 classid; /* * Due to the nature of the classifier it is required to ignore all @@ -121,17 +120,18 @@ static int cls_cgroup_classify(struct sk_buff *skb, struct tcf_proto *tp, return -1; rcu_read_lock(); - cs = task_cls_state(current); - if (cs->classid && tcf_em_tree_match(skb, &head->ematches, NULL)) { - res->classid = cs->classid; - res->class = 0; - ret = tcf_exts_exec(skb, &head->exts, res); - } else - ret = -1; - + classid = task_cls_state(current)->classid; rcu_read_unlock(); - return ret; + if (!classid) + return -1; + + if (!tcf_em_tree_match(skb, &head->ematches, NULL)) + return -1; + + res->classid = classid; + res->class = 0; + return tcf_exts_exec(skb, &head->exts, res); } static unsigned long cls_cgroup_get(struct tcf_proto *tp, u32 handle) From 18a36c1a398055e87a3646738abf3c1b0e98e7e2 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 26 May 2009 20:48:04 -0700 Subject: [PATCH 499/670] gianfar: fix babbling rx error event bug Gianfar interrupt handler uses IEVENT_ERR_MASK to check and handle errors. Babbling RX error (IEVENT_BABR) should be included in IEVENT_ERROR_MASK. Otherwise if BABR is raised, it never gets handled nor cleared, and an interrupt storm results. This has been observed to happen on sending a burst of ethernet frames to a gianfar based board. Signed-off-by: Xiaotian Feng Signed-off-by: David S. Miller --- drivers/net/gianfar.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h index 0642d52aef5c..cf352961ae9b 100644 --- a/drivers/net/gianfar.h +++ b/drivers/net/gianfar.h @@ -259,7 +259,7 @@ extern const char gfar_driver_version[]; (IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \ IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \ | IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \ - | IEVENT_MAG) + | IEVENT_MAG | IEVENT_BABR) #define IMASK_INIT_CLEAR 0x00000000 #define IMASK_BABR 0x80000000 From 5ad18900355743757e7f415bcb850ea8406a13e2 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 26 May 2009 20:50:12 -0700 Subject: [PATCH 500/670] atlx: move modinfo data from atlx.h to atl1.c Both atl1.c and atl2.c include atlx.h, which defines some modinfo stuff. But atl2.c seems like it doesn't want the modinfo data from atlx.h, as it defines its own. Running modinfo on atl2.ko, we get conflicting information: $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation , Chris Snook version: 2.1.3 author: Xiong Huang , Chris Snook , Jay Cliburn Move the modinfo data out of atlx.h and into atl1.c to eliminate the confusion: $ /sbin/modinfo drivers/net/atlx/atl1.ko | egrep "version|description|author" version: 2.1.3 author: Xiong Huang , Chris Snook , Jay Cliburn description: Atheros L1 Gigabit Ethernet Driver $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation , Chris Snook Reported-by: Scott Scriven Signed-off-by: Alex Chiang Acked-by: Jay Cliburn Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 6 ++++++ drivers/net/atlx/atlx.h | 6 ------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 0ab22540bf59..4e817126e280 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -82,6 +82,12 @@ #include "atl1.h" +#define ATLX_DRIVER_VERSION "2.1.3" +MODULE_AUTHOR("Xiong Huang , \ + Chris Snook , Jay Cliburn "); +MODULE_LICENSE("GPL"); +MODULE_VERSION(ATLX_DRIVER_VERSION); + /* Temporary hack for merging atl1 and atl2 */ #include "atlx.c" diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h index 297a03da6b7f..14054b75aa62 100644 --- a/drivers/net/atlx/atlx.h +++ b/drivers/net/atlx/atlx.h @@ -29,12 +29,6 @@ #include #include -#define ATLX_DRIVER_VERSION "2.1.3" -MODULE_AUTHOR("Xiong Huang , \ - Chris Snook , Jay Cliburn "); -MODULE_LICENSE("GPL"); -MODULE_VERSION(ATLX_DRIVER_VERSION); - #define ATLX_ERR_PHY 2 #define ATLX_ERR_PHY_SPEED 7 #define ATLX_ERR_PHY_RES 8 From b63dc8fef7ca5c51d163295d824e78c770d48ccf Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 20:55:33 -0700 Subject: [PATCH 501/670] bfin_mac: fix build error due to net_device_ops convert MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The previous commit "convert to net_device_ops" broke the Blackfin MAC driver as it declared the new structure before the function it used: CC drivers/net/bfin_mac.o drivers/net/bfin_mac.c:984: error: ‘bfin_mac_close’ undeclared here (not in a function) make[1]: *** [drivers/net/bfin_mac.o] Error 1 Signed-off-by: Mike Frysinger Signed-off-by: David S. Miller --- drivers/net/bfin_mac.c | 29 ++++++++++++++--------------- 1 file changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 9f971ed6b58d..b4da18213324 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -979,22 +979,7 @@ static int bfin_mac_open(struct net_device *dev) return 0; } -static const struct net_device_ops bfin_mac_netdev_ops = { - .ndo_open = bfin_mac_open, - .ndo_stop = bfin_mac_close, - .ndo_start_xmit = bfin_mac_hard_start_xmit, - .ndo_set_mac_address = bfin_mac_set_mac_address, - .ndo_tx_timeout = bfin_mac_timeout, - .ndo_set_multicast_list = bfin_mac_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = bfin_mac_poll, -#endif -}; - /* - * * this makes the board clean up everything that it can * and not talk to the outside world. Caused by * an 'ifconfig ethX down' @@ -1019,6 +1004,20 @@ static int bfin_mac_close(struct net_device *dev) return 0; } +static const struct net_device_ops bfin_mac_netdev_ops = { + .ndo_open = bfin_mac_open, + .ndo_stop = bfin_mac_close, + .ndo_start_xmit = bfin_mac_hard_start_xmit, + .ndo_set_mac_address = bfin_mac_set_mac_address, + .ndo_tx_timeout = bfin_mac_timeout, + .ndo_set_multicast_list = bfin_mac_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = bfin_mac_poll, +#endif +}; + static int __devinit bfin_mac_probe(struct platform_device *pdev) { struct net_device *ndev; From 7a1450fdf4c69961f3926352fd8bc4ea19676756 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 04:55:38 -0400 Subject: [PATCH 502/670] Blackfin: hook up preadv/pwritev syscalls Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/unistd.h | 4 +++- arch/blackfin/mach-common/entry.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 1e57b636e0bc..cf5066d3efd2 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_dup3 363 #define __NR_pipe2 364 #define __NR_inotify_init1 365 +#define __NR_preadv 366 +#define __NR_pwritev 367 -#define __NR_syscall 366 +#define __NR_syscall 368 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 21e65a339a22..a063a434f7e3 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table) .long _sys_dup3 .long _sys_pipe2 .long _sys_inotify_init1 /* 365 */ + .long _sys_preadv + .long _sys_pwritev .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall From 6c83429a1c32c914dfb81939cc2ddece97e48294 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 24 May 2009 02:13:15 -0400 Subject: [PATCH 503/670] MAINTAINERS: update Blackfin items With Bryan Wu having moved on to another job, push the slack onto some other ADI lackeys. Signed-off-by: Mike Frysinger --- MAINTAINERS | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 77cbfb1a696c..7dd34750264f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1132,16 +1132,16 @@ F: fs/bfs/ F: include/linux/bfs_fs.h BLACKFIN ARCHITECTURE -P: Bryan Wu -M: cooloney@kernel.org +P: Mike Frysinger +M: vapier@gentoo.org L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: arch/blackfin/ BLACKFIN EMAC DRIVER -P: Bryan Wu -M: cooloney@kernel.org +P: Michael Hennerich +M: michael.hennerich@analog.com L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) W: http://blackfin.uclinux.org S: Supported From 49afa60948f859e71d68a74c1af6ccd7b5b94d82 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 18 May 2009 04:33:07 -0400 Subject: [PATCH 504/670] MAINTAINERS: drop (subscribers-only) markings on Blackfin lists All of the Blackfin lists are transparently moderated for non-subscribers. i.e. there are no annoying notices and people get whitelisted after first their posting. Signed-off-by: Mike Frysinger --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 7dd34750264f..5ee166e27b9f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1142,7 +1142,7 @@ F: arch/blackfin/ BLACKFIN EMAC DRIVER P: Michael Hennerich M: michael.hennerich@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/net/bfin_mac.* @@ -1150,7 +1150,7 @@ F: drivers/net/bfin_mac.* BLACKFIN RTC DRIVER P: Mike Frysinger M: vapier.adi@gmail.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/rtc/rtc-bfin.c @@ -1158,7 +1158,7 @@ F: drivers/rtc/rtc-bfin.c BLACKFIN SERIAL DRIVER P: Sonic Zhang M: sonic.zhang@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/serial/bfin_5xx.c @@ -1166,7 +1166,7 @@ F: drivers/serial/bfin_5xx.c BLACKFIN WATCHDOG DRIVER P: Mike Frysinger M: vapier.adi@gmail.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported F: drivers/watchdog/bfin_wdt.c @@ -1174,7 +1174,7 @@ F: drivers/watchdog/bfin_wdt.c BLACKFIN I2C TWI DRIVER P: Sonic Zhang M: sonic.zhang@analog.com -L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only) +L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org/ S: Supported F: drivers/i2c/busses/i2c-bfin-twi.c From 6b50520b2fd9bf521f9c947b5f6999bad273a51d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 19 May 2009 10:03:22 -0400 Subject: [PATCH 505/670] Blackfin: ignore generated vmlinux.lds Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 arch/blackfin/kernel/.gitignore diff --git a/arch/blackfin/kernel/.gitignore b/arch/blackfin/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/arch/blackfin/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds From 2ec10ea91bf3688013b00638f29df4f8f6b5c18b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 May 2009 19:45:39 -0400 Subject: [PATCH 506/670] Blackfin: drop unneeded asm/.gitignore We don't create a include/asm/mach/ symlink anymore, so we don't need the .gitignore for it. Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/.gitignore | 1 - 1 file changed, 1 deletion(-) delete mode 100644 arch/blackfin/include/asm/.gitignore diff --git a/arch/blackfin/include/asm/.gitignore b/arch/blackfin/include/asm/.gitignore deleted file mode 100644 index 7858564a4466..000000000000 --- a/arch/blackfin/include/asm/.gitignore +++ /dev/null @@ -1 +0,0 @@ -+mach From add8a5050a52f1bd1be6b97be86fdd1cfbea2d1d Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 26 May 2009 05:03:52 -0400 Subject: [PATCH 507/670] Blackfin: fix strncmp.o build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix some more fallout of the string changes: CC arch/blackfin/lib/strncmp.o In file included from include/linux/bitmap.h:9, from include/linux/nodemask.h:90, from include/linux/mmzone.h:17, from include/linux/gfp.h:5, from include/linux/kmod.h:23, from include/linux/module.h:14, from arch/blackfin/lib/strncmp.c:14: include/linux/string.h: In function ‘strstarts’: include/linux/string.h:132: error: implicit declaration of function ‘strncmp’ make[1]: *** [arch/blackfin/lib/strncmp.o] Error 1 Signed-off-by: Mike Frysinger CC: Rusty Russell --- arch/blackfin/lib/strncmp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/blackfin/lib/strncmp.c b/arch/blackfin/lib/strncmp.c index 2aaae78a68e0..46518b1d2983 100644 --- a/arch/blackfin/lib/strncmp.c +++ b/arch/blackfin/lib/strncmp.c @@ -8,9 +8,8 @@ #define strncmp __inline_strncmp #include -#undef strncmp - #include +#undef strncmp int strncmp(const char *cs, const char *ct, size_t count) { From b16e7766d6436835f473ba823ad04fbdfe5e9cbd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 May 2009 13:36:10 +1000 Subject: [PATCH 508/670] powerpc: Move dma-noncoherent.c from arch/powerpc/lib to arch/powerpc/mm (pre-requisite to make the next patches more palatable) Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/lib/Makefile | 1 - arch/powerpc/mm/Makefile | 1 + arch/powerpc/{lib => mm}/dma-noncoherent.c | 0 3 files changed, 1 insertion(+), 1 deletion(-) rename arch/powerpc/{lib => mm}/dma-noncoherent.c (100%) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 8db35278a4b4..29b742b90f1f 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o obj-$(CONFIG_XMON) += sstep.o obj-$(CONFIG_KPROBES) += sstep.o -obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 17290bcedc5e..b746f4ca4209 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_PPC_MM_SLICES) += slice.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o +obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c similarity index 100% rename from arch/powerpc/lib/dma-noncoherent.c rename to arch/powerpc/mm/dma-noncoherent.c From f637a49e507c88354ab32b5d914e06acfb7ee00d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 May 2009 13:44:50 +1000 Subject: [PATCH 509/670] powerpc: Minor cleanups of kernel virt address space definitions Make FIXADDR_TOP a compile time constant and cleanup a couple of definitions relative to the layout of the kernel address space on ppc32. We also print out that layout at boot time for debugging purposes. This is a pre-requisite for properly fixing non-coherent DMA allocactions. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/fixmap.h | 4 ++-- arch/powerpc/include/asm/pgtable-ppc32.h | 22 ++++++++++++++++++++-- arch/powerpc/mm/init_32.c | 8 ++------ arch/powerpc/mm/mem.c | 13 +++++++++++++ arch/powerpc/mm/pgtable_32.c | 2 -- 5 files changed, 37 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h index d60fd18f428c..f1f4e23a84e9 100644 --- a/arch/powerpc/include/asm/fixmap.h +++ b/arch/powerpc/include/asm/fixmap.h @@ -14,8 +14,6 @@ #ifndef _ASM_FIXMAP_H #define _ASM_FIXMAP_H -extern unsigned long FIXADDR_TOP; - #ifndef __ASSEMBLY__ #include #include @@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP; #include #endif +#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) + /* * Here we define all the compile-time 'special' virtual * addresses. The point is to have a constant address at diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index ba45c997830f..28fe9d4bae35 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -10,7 +10,7 @@ extern unsigned long va_to_phys(unsigned long address); extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; +extern unsigned long ioremap_bot; #ifdef CONFIG_44x extern int icache_44x_need_flush; @@ -55,9 +55,27 @@ extern int icache_44x_need_flush; #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +/* + * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary + * value (for now) on others, from where we can start layout kernel + * virtual space that goes below PKMAP and FIXMAP + */ +#ifdef CONFIG_HIGHMEM +#define KVIRT_TOP PKMAP_BASE +#else +#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */ +#endif + +/* + * ioremap_bot starts at that address. Early ioremaps move down from there, + * until mem_init() at which point this becomes the top of the vmalloc + * and ioremap space + */ +#define IOREMAP_TOP KVIRT_TOP + /* * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 64MB value just means that there will be a 64MB "hole" after the + * current 16MB value just means that there will be a 64MB "hole" after the * physical memory until the kernel virtual memory starts. That means that * any out-of-bounds memory accesses will hopefully be caught. * The vmalloc() routines leaves a hole of 4kB between each vmalloced diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 666a5e8a5be1..3de6a0d93824 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -168,12 +168,8 @@ void __init MMU_init(void) ppc_md.progress("MMU:mapin", 0x301); mapin_ram(); -#ifdef CONFIG_HIGHMEM - ioremap_base = PKMAP_BASE; -#else - ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */ -#endif /* CONFIG_HIGHMEM */ - ioremap_bot = ioremap_base; + /* Initialize early top-down ioremap allocator */ + ioremap_bot = IOREMAP_TOP; /* Map in I/O resources */ if (ppc_md.progress) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index d0602a76bf7f..d3a4e67561fa 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -380,6 +380,19 @@ void __init mem_init(void) bsssize >> 10, initsize >> 10); +#ifdef CONFIG_PPC32 + pr_info("Kernel virtual memory layout:\n"); + pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP); +#ifdef CONFIG_HIGHMEM + pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n", + PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP)); +#endif /* CONFIG_HIGHMEM */ + pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", + ioremap_bot, IOREMAP_TOP); + pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n", + VMALLOC_START, VMALLOC_END); +#endif /* CONFIG_PPC32 */ + mem_init_done = 1; } diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 430d0908fa50..5422169626ba 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -399,8 +399,6 @@ void kernel_map_pages(struct page *page, int numpages, int enable) #endif /* CONFIG_DEBUG_PAGEALLOC */ static int fixmaps; -unsigned long FIXADDR_TOP = (-PAGE_SIZE); -EXPORT_SYMBOL(FIXADDR_TOP); void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) { From 8b31e49d1d75729c1da9009664ba52abd1adc628 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 27 May 2009 13:50:33 +1000 Subject: [PATCH 510/670] powerpc: Fix up dma_alloc_coherent() on platforms without cache coherency. The implementation we just revived has issues, such as using a Kconfig-defined virtual address area in kernel space that nothing actually carves out (and thus will overlap whatever is there), or having some dependencies on being self contained in a single PTE page which adds unnecessary constraints on the kernel virtual address space. This fixes it by using more classic PTE accessors and automatically locating the area for consistent memory, carving an appropriate hole in the kernel virtual address space, leaving only the size of that area as a Kconfig option. It also brings some dma-mask related fixes from the ARM implementation which was almost identical initially but grew its own fixes. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 13 --- arch/powerpc/include/asm/dma-mapping.h | 6 +- arch/powerpc/include/asm/pgtable-ppc32.h | 4 + arch/powerpc/kernel/dma.c | 2 +- arch/powerpc/mm/dma-noncoherent.c | 108 +++++++++-------------- arch/powerpc/mm/mem.c | 4 + 6 files changed, 54 insertions(+), 83 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3bb43adce44d..cdc9a6ff4be8 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -868,19 +868,6 @@ config TASK_SIZE default "0x80000000" if PPC_PREP || PPC_8xx default "0xc0000000" -config CONSISTENT_START_BOOL - bool "Set custom consistent memory pool address" - depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE - help - This option allows you to set the base virtual address - of the consistent memory pool. This pool of virtual - memory is used to make consistent memory allocations. - -config CONSISTENT_START - hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL - default "0xfd000000" if (NOT_COHERENT_CACHE && 8xx) - default "0xff100000" if NOT_COHERENT_CACHE - config CONSISTENT_SIZE_BOOL bool "Set custom consistent memory pool size" depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index c69f2b5f0cc4..cb448d68452c 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -26,7 +26,9 @@ * allocate the space "normally" and use the cache management functions * to ensure it is consistent. */ -extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp); +struct device; +extern void *__dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp); extern void __dma_free_coherent(size_t size, void *vaddr); extern void __dma_sync(void *vaddr, size_t size, int direction); extern void __dma_sync_page(struct page *page, unsigned long offset, @@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, * Cache coherent cores. */ -#define __dma_alloc_coherent(gfp, size, handle) NULL +#define __dma_alloc_coherent(dev, gfp, size, handle) NULL #define __dma_free_coherent(size, addr) ((void)0) #define __dma_sync(addr, size, rw) ((void)0) #define __dma_sync_page(pg, off, sz, rw) ((void)0) diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index 28fe9d4bae35..c9ff9d75990e 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -71,7 +71,11 @@ extern int icache_44x_need_flush; * until mem_init() at which point this becomes the top of the vmalloc * and ioremap space */ +#ifdef CONFIG_NOT_COHERENT_CACHE +#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK) +#else #define IOREMAP_TOP KVIRT_TOP +#endif /* * Just any arbitrary offset to the start of the vmalloc VM area: the diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 53c7788cba78..6b02793dc75b 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size, { void *ret; #ifdef CONFIG_NOT_COHERENT_CACHE - ret = __dma_alloc_coherent(size, dma_handle, flag); + ret = __dma_alloc_coherent(dev, size, dma_handle, flag); if (ret == NULL) return NULL; *dma_handle += get_dma_direct_offset(dev); diff --git a/arch/powerpc/mm/dma-noncoherent.c b/arch/powerpc/mm/dma-noncoherent.c index b7dc4c19f582..36692f5c9a76 100644 --- a/arch/powerpc/mm/dma-noncoherent.c +++ b/arch/powerpc/mm/dma-noncoherent.c @@ -32,20 +32,21 @@ #include +#include "mmu_decl.h" + /* * This address range defaults to a value that is safe for all * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It * can be further configured for specific applications under * the "Advanced Setup" menu. -Matt */ -#define CONSISTENT_BASE (CONFIG_CONSISTENT_START) -#define CONSISTENT_END (CONFIG_CONSISTENT_START + CONFIG_CONSISTENT_SIZE) +#define CONSISTENT_BASE (IOREMAP_TOP) +#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE) #define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) /* * This is the page table (2MB) covering uncached, DMA consistent allocations */ -static pte_t *consistent_pte; static DEFINE_SPINLOCK(consistent_lock); /* @@ -148,22 +149,38 @@ static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsi * virtual and bus address for that space. */ void * -__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) +__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { struct page *page; struct ppc_vm_region *c; unsigned long order; - u64 mask = 0x00ffffff, limit; /* ISA default */ + u64 mask = ISA_DMA_THRESHOLD, limit; - if (!consistent_pte) { - printk(KERN_ERR "%s: not initialised\n", __func__); - dump_stack(); - return NULL; + if (dev) { + mask = dev->coherent_dma_mask; + + /* + * Sanity check the DMA mask - it must be non-zero, and + * must be able to be satisfied by a DMA allocation. + */ + if (mask == 0) { + dev_warn(dev, "coherent DMA mask is unset\n"); + goto no_page; + } + + if ((~mask) & ISA_DMA_THRESHOLD) { + dev_warn(dev, "coherent DMA mask %#llx is smaller " + "than system GFP_DMA mask %#llx\n", + mask, (unsigned long long)ISA_DMA_THRESHOLD); + goto no_page; + } } + size = PAGE_ALIGN(size); limit = (mask + 1) & ~mask; - if ((limit && size >= limit) || size >= (CONSISTENT_END - CONSISTENT_BASE)) { + if ((limit && size >= limit) || + size >= (CONSISTENT_END - CONSISTENT_BASE)) { printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n", size, mask); return NULL; @@ -171,6 +188,7 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) order = get_order(size); + /* Might be useful if we ever have a real legacy DMA zone... */ if (mask != 0xffffffff) gfp |= GFP_DMA; @@ -195,7 +213,6 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); if (c) { unsigned long vaddr = c->vm_start; - pte_t *pte = consistent_pte + CONSISTENT_OFFSET(vaddr); struct page *end = page + (1 << order); split_page(page, order); @@ -206,13 +223,10 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp) *handle = page_to_phys(page); do { - BUG_ON(!pte_none(*pte)); - SetPageReserved(page); - set_pte_at(&init_mm, vaddr, - pte, mk_pte(page, pgprot_noncached(PAGE_KERNEL))); + map_page(vaddr, page_to_phys(page), + pgprot_noncached(PAGE_KERNEL)); page++; - pte++; vaddr += PAGE_SIZE; } while (size -= PAGE_SIZE); @@ -241,8 +255,7 @@ void __dma_free_coherent(size_t size, void *vaddr) { struct ppc_vm_region *c; unsigned long flags, addr; - pte_t *ptep; - + size = PAGE_ALIGN(size); spin_lock_irqsave(&consistent_lock, flags); @@ -258,29 +271,26 @@ void __dma_free_coherent(size_t size, void *vaddr) size = c->vm_end - c->vm_start; } - ptep = consistent_pte + CONSISTENT_OFFSET(c->vm_start); addr = c->vm_start; do { - pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep); + pte_t *ptep; unsigned long pfn; - ptep++; - addr += PAGE_SIZE; - - if (!pte_none(pte) && pte_present(pte)) { - pfn = pte_pfn(pte); - + ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr), + addr), + addr), + addr); + if (!pte_none(*ptep) && pte_present(*ptep)) { + pfn = pte_pfn(*ptep); + pte_clear(&init_mm, addr, ptep); if (pfn_valid(pfn)) { struct page *page = pfn_to_page(pfn); - ClearPageReserved(page); + ClearPageReserved(page); __free_page(page); - continue; } } - - printk(KERN_CRIT "%s: bad page in kernel page table\n", - __func__); + addr += PAGE_SIZE; } while (size -= PAGE_SIZE); flush_tlb_kernel_range(c->vm_start, c->vm_end); @@ -300,42 +310,6 @@ void __dma_free_coherent(size_t size, void *vaddr) } EXPORT_SYMBOL(__dma_free_coherent); -/* - * Initialise the consistent memory allocation. - */ -static int __init dma_alloc_init(void) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - int ret = 0; - - do { - pgd = pgd_offset(&init_mm, CONSISTENT_BASE); - pud = pud_alloc(&init_mm, pgd, CONSISTENT_BASE); - pmd = pmd_alloc(&init_mm, pud, CONSISTENT_BASE); - if (!pmd) { - printk(KERN_ERR "%s: no pmd tables\n", __func__); - ret = -ENOMEM; - break; - } - - pte = pte_alloc_kernel(pmd, CONSISTENT_BASE); - if (!pte) { - printk(KERN_ERR "%s: no pte tables\n", __func__); - ret = -ENOMEM; - break; - } - - consistent_pte = pte; - } while (0); - - return ret; -} - -core_initcall(dma_alloc_init); - /* * make an area consistent. */ diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index d3a4e67561fa..579382c163a9 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -387,6 +387,10 @@ void __init mem_init(void) pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n", PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP)); #endif /* CONFIG_HIGHMEM */ +#ifdef CONFIG_NOT_COHERENT_CACHE + pr_info(" * 0x%08lx..0x%08lx : consistent mem\n", + IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE); +#endif /* CONFIG_NOT_COHERENT_CACHE */ pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", ioremap_bot, IOREMAP_TOP); pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n", From 4c713189485dbea875aecd1990daed74908e181d Mon Sep 17 00:00:00 2001 From: Dave Young Date: Wed, 27 May 2009 09:10:28 +0200 Subject: [PATCH 511/670] Bluetooth: Remove useless flush_work() causing lockdep warnings The calls to flush_work() are pointless in a single thread workqueue and they are actually causing a lockdep warning. ============================================= [ INFO: possible recursive locking detected ] 2.6.30-rc6-02911-gbb803cf #16 --------------------------------------------- bluetooth/2518 is trying to acquire lock: (bluetooth){+.+.+.}, at: [] flush_work+0x28/0xb0 but task is already holding lock: (bluetooth){+.+.+.}, at: [] worker_thread+0x149/0x25e other info that might help us debug this: 2 locks held by bluetooth/2518: #0: (bluetooth){+.+.+.}, at: [] worker_thread+0x149/0x25e #1: (&conn->work_del){+.+...}, at: [] worker_thread+0x149/0x25e stack backtrace: Pid: 2518, comm: bluetooth Not tainted 2.6.30-rc6-02911-gbb803cf #16 Call Trace: [] ? printk+0xf/0x11 [] __lock_acquire+0x7ce/0xb1b [] lock_acquire+0x90/0xad [] ? flush_work+0x28/0xb0 [] flush_work+0x42/0xb0 [] ? flush_work+0x28/0xb0 [] del_conn+0x1c/0x84 [bluetooth] [] worker_thread+0x18e/0x25e [] ? worker_thread+0x149/0x25e [] ? del_conn+0x0/0x84 [bluetooth] [] ? autoremove_wake_function+0x0/0x33 [] ? worker_thread+0x0/0x25e [] kthread+0x45/0x6b [] ? kthread+0x0/0x6b [] kernel_thread_helper+0x7/0x10 Based on a report by Oliver Hartkopp Signed-off-by: Dave Young Tested-by: Oliver Hartkopp Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_sysfs.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index 4cc3624bd22d..95f7a7a544b4 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -90,9 +90,6 @@ static void add_conn(struct work_struct *work) struct hci_conn *conn = container_of(work, struct hci_conn, work_add); struct hci_dev *hdev = conn->hdev; - /* ensure previous del is complete */ - flush_work(&conn->work_del); - dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); if (device_add(&conn->dev) < 0) { @@ -118,9 +115,6 @@ static void del_conn(struct work_struct *work) struct hci_conn *conn = container_of(work, struct hci_conn, work_del); struct hci_dev *hdev = conn->hdev; - /* ensure previous add is complete */ - flush_work(&conn->work_add); - if (!device_is_registered(&conn->dev)) return; From 6af3fb72d2437239e5eb13a59e95dc43ccab3e8f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 May 2009 10:49:26 +0200 Subject: [PATCH 512/670] ALSA: Fix invalid jiffies check after pause The hw_ptr_jiffies has to be reset properly to avoid the invalid check of jiffies delta in snd_pcm_update_hw_ptr*() functions. Especailly this patch fixes the bogus jiffies check after the puase and resume. This patch is a modified version of the original patch by Jaroslav. Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 1 - sound/core/pcm_native.c | 6 ++++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index a2a792c18c40..3eea98a4e65a 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -1478,7 +1478,6 @@ static int snd_pcm_lib_ioctl_reset(struct snd_pcm_substream *substream, runtime->status->hw_ptr %= runtime->buffer_size; else runtime->status->hw_ptr = 0; - runtime->hw_ptr_jiffies = jiffies; snd_pcm_stream_unlock_irqrestore(substream, flags); return 0; } diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index fc6f98e257df..b5da656d1ece 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -848,6 +848,7 @@ static void snd_pcm_post_start(struct snd_pcm_substream *substream, int state) { struct snd_pcm_runtime *runtime = substream->runtime; snd_pcm_trigger_tstamp(substream); + runtime->hw_ptr_jiffies = jiffies; runtime->status->state = state; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && runtime->silence_size > 0) @@ -961,6 +962,11 @@ static int snd_pcm_do_pause(struct snd_pcm_substream *substream, int push) { if (substream->runtime->trigger_master != substream) return 0; + /* The jiffies check in snd_pcm_update_hw_ptr*() is done by + * a delta betwen the current jiffies, this gives a large enough + * delta, effectively to skip the check once. + */ + substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000; return substream->ops->trigger(substream, push ? SNDRV_PCM_TRIGGER_PAUSE_PUSH : SNDRV_PCM_TRIGGER_PAUSE_RELEASE); From 9d911d7903926a65ef49ec671bacd86bcee5eb51 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Thu, 21 May 2009 16:21:15 -0600 Subject: [PATCH 513/670] PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_func An oops can occur if a user attempts to use both PCI logical hotplug and the ACPI physical hotplug driver (acpiphp) in this sequence, where $slot/address == $device. In other words, if acpiphp has claimed a PCI device, and that device is logically removed, then acpiphp may oops when it attempts to access it again. # echo 1 > /sys/bus/pci/devices/$device/remove # echo 0 > /sys/bus/pci/slots/$slot/power Unable to handle kernel NULL pointer dereference (address 0000000000000000) Call Trace: [] show_stack+0x50/0xa0 [] show_regs+0x820/0x860 [] die+0x190/0x2a0 [] ia64_do_page_fault+0x8e0/0xa40 [] ia64_native_leave_kernel+0x0/0x270 [] pci_remove_bus_device+0x120/0x260 [] acpiphp_disable_slot+0x410/0x540 [acpiphp] [] disable_slot+0xc0/0x120 [acpiphp] [] power_write_file+0x1e0/0x2a0 [pci_hotplug] [] pci_slot_attr_store+0x60/0xa0 [] sysfs_write_file+0x230/0x2c0 [] vfs_write+0x190/0x2e0 [] sys_write+0x80/0x100 [] ia64_ret_from_syscall+0x0/0x20 [] __kernel_syscall_via_break+0x0/0x20 The root cause of this oops is that the logical remove ("echo 1 > /sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The pci_dev struct itself wasn't deallocated because acpiphp kept a reference, but some of its fields became invalid. acpiphp doesn't have any real reason to keep a pointer to a pci_dev around. It can always derive it using pci_get_slot(). If a logical remove destroys the pci_dev, acpiphp won't find it and is thus prevented from causing mischief. Reviewed-by: Matthew Wilcox Reviewed-by: Kenji Kaneshige Tested-by: Kenji Kaneshige Reported-by: Kenji Kaneshige Acked-by: Bjorn Helgaas Signed-off-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp.h | 1 - drivers/pci/hotplug/acpiphp_glue.c | 63 ++++++++++++------------------ 2 files changed, 26 insertions(+), 38 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 4fc168b70095..e68d5f20ffb3 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -129,7 +129,6 @@ struct acpiphp_func { struct acpiphp_bridge *bridge; /* Ejectable PCI-to-PCI bridge */ struct list_head sibling; - struct pci_dev *pci_dev; struct notifier_block nb; acpi_handle handle; diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index a33794d9e0dc..3a6064bce561 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -32,9 +32,6 @@ /* * Lifetime rules for pci_dev: - * - The one in acpiphp_func has its refcount elevated by pci_get_slot() - * when the driver is loaded or when an insertion event occurs. It loses - * a refcount when its ejected or the driver unloads. * - The one in acpiphp_bridge has its refcount elevated by pci_get_slot() * when the bridge is scanned and it loses a refcount when the bridge * is removed. @@ -130,6 +127,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) unsigned long long adr, sun; int device, function, retval; struct pci_bus *pbus = bridge->pci_bus; + struct pci_dev *pdev; if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle)) return AE_OK; @@ -213,10 +211,10 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) newfunc->slot = slot; list_add_tail(&newfunc->sibling, &slot->funcs); - /* associate corresponding pci_dev */ - newfunc->pci_dev = pci_get_slot(pbus, PCI_DEVFN(device, function)); - if (newfunc->pci_dev) { + pdev = pci_get_slot(pbus, PCI_DEVFN(device, function)); + if (pdev) { slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); + pci_dev_put(pdev); } if (is_dock_device(handle)) { @@ -617,7 +615,6 @@ static void cleanup_bridge(struct acpiphp_bridge *bridge) if (ACPI_FAILURE(status)) err("failed to remove notify handler\n"); } - pci_dev_put(func->pci_dev); list_del(list); kfree(func); } @@ -1101,22 +1098,24 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_enable_bridges(bus); pci_bus_add_devices(bus); - /* associate pci_dev to our representation */ list_for_each (l, &slot->funcs) { func = list_entry(l, struct acpiphp_func, sibling); - func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device, - func->function)); - if (!func->pci_dev) + dev = pci_get_slot(bus, PCI_DEVFN(slot->device, + func->function)); + if (!dev) continue; - if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && - func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) + if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE && + dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) { + pci_dev_put(dev); continue; + } status = find_p2p_bridge(func->handle, (u32)1, bus, NULL); if (ACPI_FAILURE(status)) warn("find_p2p_bridge failed (error code = 0x%x)\n", status); + pci_dev_put(dev); } slot->flags |= SLOT_ENABLED; @@ -1142,17 +1141,14 @@ static void disable_bridges(struct pci_bus *bus) */ static int disable_device(struct acpiphp_slot *slot) { - int retval = 0; struct acpiphp_func *func; - struct list_head *l; + struct pci_dev *pdev; /* is this slot already disabled? */ if (!(slot->flags & SLOT_ENABLED)) goto err_exit; - list_for_each (l, &slot->funcs) { - func = list_entry(l, struct acpiphp_func, sibling); - + list_for_each_entry(func, &slot->funcs, sibling) { if (func->bridge) { /* cleanup p2p bridges under this P2P bridge */ cleanup_p2p_bridge(func->bridge->handle, @@ -1160,35 +1156,28 @@ static int disable_device(struct acpiphp_slot *slot) func->bridge = NULL; } - if (func->pci_dev) { - pci_stop_bus_device(func->pci_dev); - if (func->pci_dev->subordinate) { - disable_bridges(func->pci_dev->subordinate); - pci_disable_device(func->pci_dev); + pdev = pci_get_slot(slot->bridge->pci_bus, + PCI_DEVFN(slot->device, func->function)); + if (pdev) { + pci_stop_bus_device(pdev); + if (pdev->subordinate) { + disable_bridges(pdev->subordinate); + pci_disable_device(pdev); } + pci_remove_bus_device(pdev); + pci_dev_put(pdev); } } - list_for_each (l, &slot->funcs) { - func = list_entry(l, struct acpiphp_func, sibling); - + list_for_each_entry(func, &slot->funcs, sibling) { acpiphp_unconfigure_ioapics(func->handle); acpiphp_bus_trim(func->handle); - /* try to remove anyway. - * acpiphp_bus_add might have been failed */ - - if (!func->pci_dev) - continue; - - pci_remove_bus_device(func->pci_dev); - pci_dev_put(func->pci_dev); - func->pci_dev = NULL; } slot->flags &= (~SLOT_ENABLED); - err_exit: - return retval; +err_exit: + return 0; } From c87d9732004b3f8fd82d729f12ccfb96c0df279e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 May 2009 10:53:33 +0200 Subject: [PATCH 514/670] ALSA: Enable PCM hw_ptr_jiffies check only in xrun_debug mode The PCM hw_ptr jiffies check results sometimes in problems when a hardware doesn't give smooth hw_ptr updates. So far, au88x0 and some other drivers appear not working due to this strict check. However, this check is a nice debug tool, and the capability should be still kept. Hence, we disable this check now as default unless the user enables it by setting the xrun_debug mode to the specific stream via a proc file. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/Procfile.txt | 5 +++++ sound/core/pcm_lib.c | 9 ++++++++- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index bba2dbb79d81..cfac20cf9e33 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -104,6 +104,11 @@ card*/pcm*/xrun_debug When this value is greater than 1, the driver will show the stack trace additionally. This may help the debugging. + Since 2.6.30, this option also enables the hwptr check using + jiffies. This detects spontaneous invalid pointer callback + values, but can be lead to too much corrections for a (mostly + buggy) hardware that doesn't give smooth pointer updates. + card*/pcm*/sub*/info The general information of this PCM sub-stream. diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 3eea98a4e65a..d659995ac3ac 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -249,6 +249,11 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; } } + + /* Do jiffies check only in xrun_debug mode */ + if (!xrun_debug(substream)) + goto no_jiffies_check; + /* Skip the jiffies check for hardwares with BATCH flag. * Such hardware usually just increases the position at each IRQ, * thus it can't give any strange position. @@ -336,7 +341,9 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream) hw_base = 0; new_hw_ptr = hw_base + pos; } - if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) { + /* Do jiffies check only in xrun_debug mode */ + if (xrun_debug(substream) && + ((delta * HZ) / runtime->rate) > jdelta + HZ/100) { hw_ptr_error(substream, "hw_ptr skipping! " "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n", From 55de5ef970c680d8d75f2a9aa7e4f172140dbd9c Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 27 May 2009 10:49:30 +0200 Subject: [PATCH 515/670] sound: usb-audio: make the MotU Fastlane work again Kernel 2.6.18 broke the MotU Fastlane, which uses duplicate endpoint numbers in a manner that is not only illegal but also confuses the kernel's endpoint descriptor caching mechanism. To work around this, we have to add a separate usb_set_interface() call to guide the USB core to the correct descriptors. Signed-off-by: Clemens Ladisch Reported-and-tested-by: David Fries Cc: Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.c | 2 +- sound/usb/usbaudio.h | 2 +- sound/usb/usbmidi.c | 12 +++++++++++- sound/usb/usbquirks.h | 2 +- 4 files changed, 14 insertions(+), 4 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 823296d7d578..a6b88482637b 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -3347,7 +3347,7 @@ static int snd_usb_create_quirk(struct snd_usb_audio *chip, [QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface, [QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface, [QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface, - [QUIRK_MIDI_RAW] = snd_usb_create_midi_interface, + [QUIRK_MIDI_FASTLANE] = snd_usb_create_midi_interface, [QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface, [QUIRK_MIDI_CME] = snd_usb_create_midi_interface, [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 36e4f7a29adc..8e7f78941ba6 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -153,7 +153,7 @@ enum quirk_type { QUIRK_MIDI_YAMAHA, QUIRK_MIDI_MIDIMAN, QUIRK_MIDI_NOVATION, - QUIRK_MIDI_RAW, + QUIRK_MIDI_FASTLANE, QUIRK_MIDI_EMAGIC, QUIRK_MIDI_CME, QUIRK_MIDI_US122L, diff --git a/sound/usb/usbmidi.c b/sound/usb/usbmidi.c index 26bad373fe65..2fb35cc22a30 100644 --- a/sound/usb/usbmidi.c +++ b/sound/usb/usbmidi.c @@ -1778,8 +1778,18 @@ int snd_usb_create_midi_interface(struct snd_usb_audio* chip, umidi->usb_protocol_ops = &snd_usbmidi_novation_ops; err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); break; - case QUIRK_MIDI_RAW: + case QUIRK_MIDI_FASTLANE: umidi->usb_protocol_ops = &snd_usbmidi_raw_ops; + /* + * Interface 1 contains isochronous endpoints, but with the same + * numbers as in interface 0. Since it is interface 1 that the + * USB core has most recently seen, these descriptors are now + * associated with the endpoint numbers. This will foul up our + * attempts to submit bulk/interrupt URBs to the endpoints in + * interface 0, so we have to make sure that the USB core looks + * again at interface 0 by calling usb_set_interface() on it. + */ + usb_set_interface(umidi->chip->dev, 0, 0); err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints); break; case QUIRK_MIDI_EMAGIC: diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 647ef5029651..5d955aaad85f 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -1868,7 +1868,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .data = & (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, - .type = QUIRK_MIDI_RAW + .type = QUIRK_MIDI_FASTLANE }, { .ifnum = 1, From ed37d83e6aa218192fb28bb6b82498d2a8c74070 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 27 May 2009 21:39:05 +1000 Subject: [PATCH 516/670] md: raid5: change incorrect usage of 'min' macro to 'min_t' A recent patch to raid5.c use min on an int and a sector_t. This isn't allowed. So change it to min_t(sector_t,x,y). Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 3c3626d2a1f9..5d400aef8d9b 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3811,13 +3811,13 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped safepos = conf->reshape_safe; sector_div(safepos, data_disks); if (mddev->delta_disks < 0) { - writepos -= min(reshape_sectors, writepos); + writepos -= min_t(sector_t, reshape_sectors, writepos); readpos += reshape_sectors; safepos += reshape_sectors; } else { writepos += reshape_sectors; - readpos -= min(reshape_sectors, readpos); - safepos -= min(reshape_sectors, safepos); + readpos -= min_t(sector_t, reshape_sectors, readpos); + safepos -= min_t(sector_t, reshape_sectors, safepos); } /* 'writepos' is the most advanced device address we might write. From 346a850e3c3a20159cef2b79235e6d34aa497c65 Mon Sep 17 00:00:00 2001 From: Manuel Traut Date: Wed, 27 May 2009 06:20:05 -0700 Subject: [PATCH 517/670] Input: usb1400_ts - fix access to "device data" in resume function platform_data != driver_data driver data is actually the "correct" place of the struct however it is not placed there due to the need of the ac97 struct. This is broken since d9105c2b01 aka "[ARM] 5184/1: Split ucb1400_ts into core and touchscreen" Signed-off-by: Manuel Traut Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ucb1400_ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index f100c7f4c1db..6954f5500108 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -419,7 +419,7 @@ static int ucb1400_ts_remove(struct platform_device *dev) #ifdef CONFIG_PM static int ucb1400_ts_resume(struct platform_device *dev) { - struct ucb1400_ts *ucb = platform_get_drvdata(dev); + struct ucb1400_ts *ucb = dev->dev.platform_data; if (ucb->ts_task) { /* From 683a04cebc63819a36b1db19843bd17771f05b55 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Wed, 27 May 2009 15:45:34 +0200 Subject: [PATCH 518/670] netfilter: xt_hashlimit does a wrong SEQ_SKIP The function dl_seq_show() returns 1 (equal to SEQ_SKIP) in case a seq_printf() call return -1. It should return -1. This SEQ_SKIP behavior brakes processing the proc file e.g. via a pipe or just through less. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Patrick McHardy --- net/netfilter/xt_hashlimit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index a5b5369c30f9..219dcdbe388c 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -926,7 +926,7 @@ static int dl_seq_show(struct seq_file *s, void *v) if (!hlist_empty(&htable->hash[*bucket])) { hlist_for_each_entry(ent, pos, &htable->hash[*bucket], node) if (dl_seq_real_show(ent, htable->family, s)) - return 1; + return -1; } return 0; } From eeff9beec3d2563c42cca41e66d4169592bb5475 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 27 May 2009 15:49:11 +0200 Subject: [PATCH 519/670] netfilter: nfnetlink_log: fix wrong skbuff size calculation This problem was introduced in 72961ecf84d67d6359a1b30f9b2a8427f13e1e71 since no space was reserved for the new attributes NFULA_HWTYPE, NFULA_HWLEN and NFULA_HWHEADER. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- net/netfilter/nfnetlink_log.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index fd326ac27ec8..66a6dd5c519a 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -581,6 +581,12 @@ nfulnl_log_packet(u_int8_t pf, + nla_total_size(sizeof(struct nfulnl_msg_packet_hw)) + nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp)); + if (in && skb_mac_header_was_set(skb)) { + size += nla_total_size(skb->dev->hard_header_len) + + nla_total_size(sizeof(u_int16_t)) /* hwtype */ + + nla_total_size(sizeof(u_int16_t)); /* hwlen */ + } + spin_lock_bh(&inst->lock); if (inst->flags & NFULNL_CFG_F_SEQ) From 348ca1029e8bae6e0c49097ad25439b17c5326f4 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 May 2009 15:46:50 +0100 Subject: [PATCH 520/670] FS-Cache: Fixup renamed filenames in comments in internal.h Fix up renamed filenames in comments in fs/fscache/internal.h. Originally, the files were all called fsc-xxx.c, but they got renamed to just xxx.c. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/fscache/internal.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index e0cbd16f6dc9..1c341304621f 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -28,7 +28,7 @@ #define FSCACHE_MAX_THREADS 32 /* - * fsc-cache.c + * cache.c */ extern struct list_head fscache_cache_list; extern struct rw_semaphore fscache_addremove_sem; @@ -37,7 +37,7 @@ extern struct fscache_cache *fscache_select_cache_for_object( struct fscache_cookie *); /* - * fsc-cookie.c + * cookie.c */ extern struct kmem_cache *fscache_cookie_jar; @@ -45,13 +45,13 @@ extern void fscache_cookie_init_once(void *); extern void __fscache_cookie_put(struct fscache_cookie *); /* - * fsc-fsdef.c + * fsdef.c */ extern struct fscache_cookie fscache_fsdef_index; extern struct fscache_cookie_def fscache_fsdef_netfs_def; /* - * fsc-histogram.c + * histogram.c */ #ifdef CONFIG_FSCACHE_HISTOGRAM extern atomic_t fscache_obj_instantiate_histogram[HZ]; @@ -75,7 +75,7 @@ extern const struct file_operations fscache_histogram_fops; #endif /* - * fsc-main.c + * main.c */ extern unsigned fscache_defer_lookup; extern unsigned fscache_defer_create; @@ -86,14 +86,14 @@ extern int fscache_wait_bit(void *); extern int fscache_wait_bit_interruptible(void *); /* - * fsc-object.c + * object.c */ extern void fscache_withdrawing_object(struct fscache_cache *, struct fscache_object *); extern void fscache_enqueue_object(struct fscache_object *); /* - * fsc-operation.c + * operation.c */ extern int fscache_submit_exclusive_op(struct fscache_object *, struct fscache_operation *); @@ -104,7 +104,7 @@ extern void fscache_start_operations(struct fscache_object *); extern void fscache_operation_gc(struct work_struct *); /* - * fsc-proc.c + * proc.c */ #ifdef CONFIG_PROC_FS extern int __init fscache_proc_init(void); @@ -115,7 +115,7 @@ extern void fscache_proc_cleanup(void); #endif /* - * fsc-stats.c + * stats.c */ #ifdef CONFIG_FSCACHE_STATS extern atomic_t fscache_n_ops_processed[FSCACHE_MAX_THREADS]; From 911e690e70540f009125bacd16c017eb1a7b1916 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 27 May 2009 15:46:55 +0100 Subject: [PATCH 521/670] CacheFiles: Fixup renamed filenames in comments in internal.h Fix up renamed filenames in comments in fs/cachefiles/internal.h. Originally, the files were all called cf-xxx.c, but they got renamed to just xxx.c. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/cachefiles/internal.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/fs/cachefiles/internal.h b/fs/cachefiles/internal.h index 19218e1463d6..f7c255f9c624 100644 --- a/fs/cachefiles/internal.h +++ b/fs/cachefiles/internal.h @@ -122,13 +122,13 @@ static inline void cachefiles_state_changed(struct cachefiles_cache *cache) } /* - * cf-bind.c + * bind.c */ extern int cachefiles_daemon_bind(struct cachefiles_cache *cache, char *args); extern void cachefiles_daemon_unbind(struct cachefiles_cache *cache); /* - * cf-daemon.c + * daemon.c */ extern const struct file_operations cachefiles_daemon_fops; @@ -136,17 +136,17 @@ extern int cachefiles_has_space(struct cachefiles_cache *cache, unsigned fnr, unsigned bnr); /* - * cf-interface.c + * interface.c */ extern const struct fscache_cache_ops cachefiles_cache_ops; /* - * cf-key.c + * key.c */ extern char *cachefiles_cook_key(const u8 *raw, int keylen, uint8_t type); /* - * cf-namei.c + * namei.c */ extern int cachefiles_delete_object(struct cachefiles_cache *cache, struct cachefiles_object *object); @@ -165,7 +165,7 @@ extern int cachefiles_check_in_use(struct cachefiles_cache *cache, struct dentry *dir, char *filename); /* - * cf-proc.c + * proc.c */ #ifdef CONFIG_CACHEFILES_HISTOGRAM extern atomic_t cachefiles_lookup_histogram[HZ]; @@ -190,7 +190,7 @@ void cachefiles_hist(atomic_t histogram[], unsigned long start_jif) #endif /* - * cf-rdwr.c + * rdwr.c */ extern int cachefiles_read_or_alloc_page(struct fscache_retrieval *, struct page *, gfp_t); @@ -205,7 +205,7 @@ extern int cachefiles_write_page(struct fscache_storage *, struct page *); extern void cachefiles_uncache_page(struct fscache_object *, struct page *); /* - * cf-security.c + * security.c */ extern int cachefiles_get_security_ID(struct cachefiles_cache *cache); extern int cachefiles_determine_cache_security(struct cachefiles_cache *cache, @@ -225,7 +225,7 @@ static inline void cachefiles_end_secure(struct cachefiles_cache *cache, } /* - * cf-xattr.c + * xattr.c */ extern int cachefiles_check_object_type(struct cachefiles_object *object); extern int cachefiles_set_object_xattr(struct cachefiles_object *object, From 07f4f3e8a24138ca2f3650723d670df25687cd05 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Kristian=20H=C3=B8gsberg?= Date: Wed, 27 May 2009 14:37:28 -0400 Subject: [PATCH 522/670] i915: Set object to gtt domain when faulting it back in MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a GEM object is evicted from the GTT we set it to the CPU domain, as it might get swapped in and out or ever mmapped regularly. If the object is mmapped through the GTT it can still get evicted in this way by other objects requiring GTT space. When the GTT mapping is touched again we fault it back into the GTT, but fail to set it back to the GTT domain. This means we fail to flush any cached CPU writes to the pages backing the object which will then happen "eventually", typically after we write to the page through the uncached GTT mapping. [anholt: Note that userland does do a set_domain(GTT, GTT) when starting to access the GTT mapping. That covers getting the existing mapping of the object synchronized if it's bound to the GTT. But set_domain(GTT, GTT) doesn't do anything if the object is currently unbound. This fix covers the transition to being bound for GTT mapping.] Fixes glyph and other pixmap corruption during swapping. fd.o bug #21790 Signed-off-by: Kristian Høgsberg Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e2421869a40c..670d12881468 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1145,6 +1145,13 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } + + ret = i915_gem_object_set_to_gtt_domain(obj, write); + if (ret) { + mutex_unlock(&dev->struct_mutex); + return VM_FAULT_SIGBUS; + } + list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list); } From b787f2e2a37a373a045f4d9b9bed941ccff01663 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 13 May 2009 16:25:57 -0500 Subject: [PATCH 523/670] fsldma: Fix compile warnings We we build with dma_addr_t as a 64-bit quantity we get: drivers/dma/fsldma.c: In function 'fsl_chan_xfer_ld_queue': drivers/dma/fsldma.c:625: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'fsl_dma_chan_do_interrupt': drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c:737: warning: cast to pointer from integer of different size drivers/dma/fsldma.c: In function 'of_fsl_dma_probe': drivers/dma/fsldma.c:927: warning: cast to pointer from integer of different Signed-off-by: Kumar Gala Signed-off-by: Dan Williams --- drivers/dma/fsldma.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index 15783102bf17..f18d1bde0439 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -641,8 +641,8 @@ static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan) if (ld_node != &fsl_chan->ld_queue) { /* Get the ld start address from ld_queue */ next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys; - dev_dbg(fsl_chan->dev, "xfer LDs staring from %p\n", - (void *)next_dest_addr); + dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n", + (unsigned long long)next_dest_addr); set_cdar(fsl_chan, next_dest_addr); dma_start(fsl_chan); } else { @@ -756,8 +756,9 @@ static irqreturn_t fsl_dma_chan_do_interrupt(int irq, void *data) */ if (stat & FSL_DMA_SR_EOSI) { dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n"); - dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n", - (void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan)); + dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n", + (unsigned long long)get_cdar(fsl_chan), + (unsigned long long)get_ndar(fsl_chan)); stat &= ~FSL_DMA_SR_EOSI; update_cookie = 1; } @@ -947,8 +948,8 @@ static int __devinit of_fsl_dma_probe(struct of_device *dev, } dev_info(&dev->dev, "Probe the Freescale DMA driver for %s " - "controller at %p...\n", - match->compatible, (void *)fdev->reg.start); + "controller at 0x%llx...\n", + match->compatible, (unsigned long long)fdev->reg.start); fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end - fdev->reg.start + 1); From a0d24b295aed7a9daf4ca36bd4784e4d40f82303 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 19 May 2009 12:03:15 +0800 Subject: [PATCH 524/670] nfsd: fix hung up of nfs client while sync write data to nfs server Commit 'Short write in nfsd becomes a full write to the client' (31dec2538e45e9fff2007ea1f4c6bae9f78db724) broken the sync write. With the following commands to reproduce: $ mount -t nfs -o sync 192.168.0.21:/nfsroot /mnt $ cd /mnt $ echo aaaa > temp.txt Then nfs client is hung up. In SYNC mode the server alaways return the write count 0 to the client. This is because the value of host_err in nfsd_vfs_write() will be overwrite in SYNC mode by 'host_err=nfsd_sync(file);', and then we return host_err(which is now 0) as write count. This patch fixed the problem. Signed-off-by: Wei Yongjun Signed-off-by: J. Bruce Fields --- fs/nfsd/vfs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 6c68ffd6b4bb..b660435978d2 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1015,6 +1015,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file, host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset); set_fs(oldfs); if (host_err >= 0) { + *cnt = host_err; nfsdstats.io_write += host_err; fsnotify_modify(file->f_path.dentry); } @@ -1060,10 +1061,9 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file, } dprintk("nfsd: write complete host_err=%d\n", host_err); - if (host_err >= 0) { + if (host_err >= 0) err = 0; - *cnt = host_err; - } else + else err = nfserrno(host_err); out: return err; From dacd2549ca61ddbdd1ed62a76ca95dea3f0e02c6 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 26 May 2009 09:08:03 +0900 Subject: [PATCH 525/670] PCI/ACPI: fix wrong ref count handling in acpi_pci_bind() The 'dev' field of struct acpi_pci_data is having a pointer to struct pci_dev without incrementing the reference counter. Because of this, I got the following kernel oops when I was doing some pci hotplug operations. This patch fixes this bug by replacing wrong hand-made pci_find_slot() with pci_get_slot() in acpi_pci_bind(). BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 IP: [] acpi_pci_unbind+0xb1/0xdd Call Trace: [] acpi_bus_remove+0x54/0x68 [] acpi_bus_trim+0x75/0xe3 [] acpiphp_disable_slot+0x16d/0x1e0 [acpiphp] [] disable_slot+0x20/0x60 [acpiphp] [] power_write_file+0xc8/0x110 [] pci_slot_attr_store+0x24/0x30 [] sysfs_write_file+0xce/0x140 [] vfs_write+0xc7/0x170 [] sys_write+0x50/0x90 [] system_call_fastpath+0x16/0x1b Signed-off-by: Kenji Kaneshige Reviewed-by: Bjorn Helgaas Reviewed-by: Alex Chiang Tested-by: Alex Chiang Signed-off-by: Len Brown --- drivers/acpi/pci_bind.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c index 95650f83ce2e..bc46de3d967f 100644 --- a/drivers/acpi/pci_bind.c +++ b/drivers/acpi/pci_bind.c @@ -116,9 +116,6 @@ int acpi_pci_bind(struct acpi_device *device) struct acpi_pci_data *pdata; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; acpi_handle handle; - struct pci_dev *dev; - struct pci_bus *bus; - if (!device || !device->parent) return -EINVAL; @@ -176,20 +173,9 @@ int acpi_pci_bind(struct acpi_device *device) * Locate matching device in PCI namespace. If it doesn't exist * this typically means that the device isn't currently inserted * (e.g. docking station, port replicator, etc.). - * We cannot simply search the global pci device list, since - * PCI devices are added to the global pci list when the root - * bridge start ops are run, which may not have happened yet. */ - bus = pci_find_bus(data->id.segment, data->id.bus); - if (bus) { - list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->devfn == PCI_DEVFN(data->id.device, - data->id.function)) { - data->dev = dev; - break; - } - } - } + data->dev = pci_get_slot(pdata->bus, + PCI_DEVFN(data->id.device, data->id.function)); if (!data->dev) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device %04x:%02x:%02x.%d not present in PCI namespace\n", @@ -259,9 +245,10 @@ int acpi_pci_bind(struct acpi_device *device) end: kfree(buffer.pointer); - if (result) + if (result) { + pci_dev_put(data->dev); kfree(data); - + } return result; } @@ -303,6 +290,7 @@ static int acpi_pci_unbind(struct acpi_device *device) if (data->dev->subordinate) { acpi_pci_irq_del_prt(data->id.segment, data->bus->number); } + pci_dev_put(data->dev); kfree(data); end: From 7f4218354fe312b327af06c3d8c95ed5f214c8ca Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Wed, 27 May 2009 18:51:06 -0400 Subject: [PATCH 526/670] nfsd: Revert "svcrpc: take advantage of tcp autotuning" This reverts commit 47a14ef1af48c696b214ac168f056ddc79793d0e "svcrpc: take advantage of tcp autotuning", which uncovered some further problems in the server rpc code, causing significant performance regressions in common cases. We will likely reinstate this patch after releasing 2.6.30 and applying some work on the underlying fixes to the problem (developed by Trond). Reported-by: Jeff Moyer Cc: Olga Kornievskaia Cc: Jim Rees Cc: Trond Myklebust Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index af3198814c15..9d504234af4a 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -345,6 +345,7 @@ static void svc_sock_setbufsize(struct socket *sock, unsigned int snd, lock_sock(sock->sk); sock->sk->sk_sndbuf = snd * 2; sock->sk->sk_rcvbuf = rcv * 2; + sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK; release_sock(sock->sk); #endif } @@ -796,6 +797,23 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags), test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags)); + if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags)) + /* sndbuf needs to have room for one request + * per thread, otherwise we can stall even when the + * network isn't a bottleneck. + * + * We count all threads rather than threads in a + * particular pool, which provides an upper bound + * on the number of threads which will access the socket. + * + * rcvbuf just needs to be able to hold a few requests. + * Normally they will be removed from the queue + * as soon a a complete request arrives. + */ + svc_sock_setbufsize(svsk->sk_sock, + (serv->sv_nrthreads+3) * serv->sv_max_mesg, + 3 * serv->sv_max_mesg); + clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); /* Receive data. If we haven't got the record length yet, get @@ -1043,6 +1061,15 @@ static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv) tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF; + /* initialise setting must have enough space to + * receive and respond to one request. + * svc_tcp_recvfrom will re-adjust if necessary + */ + svc_sock_setbufsize(svsk->sk_sock, + 3 * svsk->sk_xprt.xpt_server->sv_max_mesg, + 3 * svsk->sk_xprt.xpt_server->sv_max_mesg); + + set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags); set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); if (sk->sk_state != TCP_ESTABLISHED) set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags); @@ -1112,14 +1139,8 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv, /* Initialize the socket */ if (sock->type == SOCK_DGRAM) svc_udp_init(svsk, serv); - else { - /* initialise setting must have enough space to - * receive and respond to one request. - */ - svc_sock_setbufsize(svsk->sk_sock, 4 * serv->sv_max_mesg, - 4 * serv->sv_max_mesg); + else svc_tcp_init(svsk, serv); - } dprintk("svc: svc_setup_socket created %p (inet %p)\n", svsk, svsk->sk_sk); From 98779be861a05c4cb75bed916df72ec0cba8b53d Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 14 May 2009 16:34:28 -0500 Subject: [PATCH 527/670] svcrdma: dma unmap the correct length for the RPCRDMA header page. The svcrdma module was incorrectly unmapping the RPCRDMA header page. On IBM pserver systems this causes a resource leak that results in running out of bus address space (10 cthon iterations will reproduce it). The code was mapping the full page but only unmapping the actual header length. The fix is to only map the header length. I also cleaned up the use of ib_dma_map_page() calls since the unmap logic always uses ib_dma_unmap_single(). I made these symmetrical. Signed-off-by: Steve Wise Signed-off-by: Tom Tucker Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_sendto.c | 12 ++++++------ net/sunrpc/xprtrdma/svc_rdma_transport.c | 10 +++++----- 2 files changed, 11 insertions(+), 11 deletions(-) diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c index 8b510c5e8777..f11be72a1a80 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c +++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c @@ -128,7 +128,8 @@ static int fast_reg_xdr(struct svcxprt_rdma *xprt, page_bytes -= sge_bytes; frmr->page_list->page_list[page_no] = - ib_dma_map_page(xprt->sc_cm_id->device, page, 0, + ib_dma_map_single(xprt->sc_cm_id->device, + page_address(page), PAGE_SIZE, DMA_TO_DEVICE); if (ib_dma_mapping_error(xprt->sc_cm_id->device, frmr->page_list->page_list[page_no])) @@ -532,18 +533,17 @@ static int send_reply(struct svcxprt_rdma *rdma, clear_bit(RDMACTXT_F_FAST_UNREG, &ctxt->flags); /* Prepare the SGE for the RPCRDMA Header */ + ctxt->sge[0].lkey = rdma->sc_dma_lkey; + ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp); ctxt->sge[0].addr = - ib_dma_map_page(rdma->sc_cm_id->device, - page, 0, PAGE_SIZE, DMA_TO_DEVICE); + ib_dma_map_single(rdma->sc_cm_id->device, page_address(page), + ctxt->sge[0].length, DMA_TO_DEVICE); if (ib_dma_mapping_error(rdma->sc_cm_id->device, ctxt->sge[0].addr)) goto err; atomic_inc(&rdma->sc_dma_used); ctxt->direction = DMA_TO_DEVICE; - ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp); - ctxt->sge[0].lkey = rdma->sc_dma_lkey; - /* Determine how many of our SGE are to be transmitted */ for (sge_no = 1; byte_count && sge_no < vec->count; sge_no++) { sge_bytes = min_t(size_t, vec->sge[sge_no].iov_len, byte_count); diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c index 4b0c2fa15e0b..5151f9f6c573 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c @@ -500,8 +500,8 @@ int svc_rdma_post_recv(struct svcxprt_rdma *xprt) BUG_ON(sge_no >= xprt->sc_max_sge); page = svc_rdma_get_page(); ctxt->pages[sge_no] = page; - pa = ib_dma_map_page(xprt->sc_cm_id->device, - page, 0, PAGE_SIZE, + pa = ib_dma_map_single(xprt->sc_cm_id->device, + page_address(page), PAGE_SIZE, DMA_FROM_DEVICE); if (ib_dma_mapping_error(xprt->sc_cm_id->device, pa)) goto err_put_ctxt; @@ -1315,8 +1315,8 @@ void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp, length = svc_rdma_xdr_encode_error(xprt, rmsgp, err, va); /* Prepare SGE for local address */ - sge.addr = ib_dma_map_page(xprt->sc_cm_id->device, - p, 0, PAGE_SIZE, DMA_FROM_DEVICE); + sge.addr = ib_dma_map_single(xprt->sc_cm_id->device, + page_address(p), PAGE_SIZE, DMA_FROM_DEVICE); if (ib_dma_mapping_error(xprt->sc_cm_id->device, sge.addr)) { put_page(p); return; @@ -1343,7 +1343,7 @@ void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp, if (ret) { dprintk("svcrdma: Error %d posting send for protocol error\n", ret); - ib_dma_unmap_page(xprt->sc_cm_id->device, + ib_dma_unmap_single(xprt->sc_cm_id->device, sge.addr, PAGE_SIZE, DMA_FROM_DEVICE); svc_rdma_put_context(ctxt, 1); From 1812e67c7410c8d0d57f14a3dc81a99bd5b30e3e Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Wed, 27 May 2009 21:00:41 +0100 Subject: [PATCH 528/670] ALSA: hda - Compaq Presario CQ60 patching for Conexant A docking mic control is shown by default. The Compaq Presario CQ60 laptop has no docking connector, so designate it as a CXT5051_HP model. This makes the phantom mixer slider disappear. Signed-off-by: Tony Vroon Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 56ce19e68cb5..4fcbe21829ab 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -1848,6 +1848,7 @@ static const char *cxt5051_models[CXT5051_MODELS] = { static struct snd_pci_quirk cxt5051_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736), + SND_PCI_QUIRK(0x103c, 0x360b, "Compaq Presario CQ60", CXT5051_HP), SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board", CXT5051_LAPTOP), SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP), From f49afbb572d5e08ae12f1a979dc2e41745040339 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Thu, 28 May 2009 16:41:36 +0300 Subject: [PATCH 529/670] MAINTAINER: Add F: entries for Gemini and FA526 Signed-off-by: Paulius Zaleckas --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 5ee166e27b9f..42c53ab6b9fa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -624,6 +624,7 @@ M: paulius.zaleckas@teltonika.lt L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) T: git git://gitorious.org/linux-gemini/mainline.git S: Maintained +F: arch/arm/mach-gemini/ ARM/EBSA110 MACHINE SUPPORT P: Russell King @@ -650,6 +651,7 @@ P: Paulius Zaleckas M: paulius.zaleckas@teltonika.lt L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +F: arch/arm/mm/*-fa* ARM/FOOTBRIDGE ARCHITECTURE P: Russell King From 67a433ce278b98f47272726a22537fab7fd99de9 Mon Sep 17 00:00:00 2001 From: Paulius Zaleckas Date: Thu, 28 May 2009 16:42:25 +0300 Subject: [PATCH 530/670] Gemini: Fix SRAM/ROM location after memory swap Signed-off-by: Paulius Zaleckas --- arch/arm/mach-gemini/include/mach/hardware.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h index de6752674c05..213a4fcfeb1c 100644 --- a/arch/arm/mach-gemini/include/mach/hardware.h +++ b/arch/arm/mach-gemini/include/mach/hardware.h @@ -15,10 +15,9 @@ /* * Memory Map definitions */ -/* FIXME: Does it really swap SRAM like this? */ #ifdef CONFIG_GEMINI_MEM_SWAP # define GEMINI_DRAM_BASE 0x00000000 -# define GEMINI_SRAM_BASE 0x20000000 +# define GEMINI_SRAM_BASE 0x70000000 #else # define GEMINI_SRAM_BASE 0x00000000 # define GEMINI_DRAM_BASE 0x10000000 From a3ce6ea46cc0d6397d1b92b1a5983bb2935306ed Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 28 May 2009 09:51:31 -0700 Subject: [PATCH 531/670] Input: libps2 - better handle bad scheduler decisions Sometimes devices send us their responses in time but due to unfortunate scheduling decisions the receiving thread does not get scheduled till much later and we erroneously decide that device timed out. Work around this problem by checking whether we received the data we needed instead of checking timeout condition. Tested-by: Sitsofe Wheeler Signed-off-by: Dmitry Torokhov --- drivers/input/serio/libps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c index 67248c31e19a..be5bbbb8ae4e 100644 --- a/drivers/input/serio/libps2.c +++ b/drivers/input/serio/libps2.c @@ -210,7 +210,7 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command) timeout = wait_event_timeout(ps2dev->wait, !(ps2dev->flags & PS2_FLAG_CMD1), timeout); - if (ps2dev->cmdcnt && timeout > 0) { + if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) { timeout = ps2_adjust_timeout(ps2dev, command, timeout); wait_event_timeout(ps2dev->wait, From bac4e960b5ce2453d862beaf20e59aa68af3b43a Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 25 May 2009 20:58:00 +0100 Subject: [PATCH 532/670] [ARM] barriers: improve xchg, bitops and atomic SMP barriers Mathieu Desnoyers pointed out that the ARM barriers were lacking: - cmpxchg, xchg and atomic add return need memory barriers on architectures which can reorder the relative order in which memory read/writes can be seen between CPUs, which seems to include recent ARM architectures. Those barriers are currently missing on ARM. - test_and_xxx_bit were missing SMP barriers. So put these barriers in. Provide separate atomic_add/atomic_sub operations which do not require barriers. Reported-Reviewed-and-Acked-by: Mathieu Desnoyers Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 13 +++++++ arch/arm/include/asm/atomic.h | 61 +++++++++++++++++++++++++++----- arch/arm/include/asm/system.h | 3 ++ arch/arm/kernel/entry-armv.S | 5 +-- arch/arm/lib/bitops.h | 2 ++ 5 files changed, 71 insertions(+), 13 deletions(-) diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 6116e4893c0a..15f8a092b700 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -114,3 +114,16 @@ .align 3; \ .long 9999b,9001f; \ .previous + +/* + * SMP data memory barrier + */ + .macro smp_dmb +#ifdef CONFIG_SMP +#if __LINUX_ARM_ARCH__ >= 7 + dmb +#elif __LINUX_ARM_ARCH__ == 6 + mcr p15, 0, r0, c7, c10, 5 @ dmb +#endif +#endif + .endm diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index ee99723b3a6c..16b52f397983 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i) : "cc"); } +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_add\n" +"1: ldrex %0, [%2]\n" +" add %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_add_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_add_return\n" "1: ldrex %0, [%2]\n" " add %0, %0, %3\n" @@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + int result; + + __asm__ __volatile__("@ atomic_sub\n" +"1: ldrex %0, [%2]\n" +" sub %0, %0, %3\n" +" strex %1, %0, [%2]\n" +" teq %1, #0\n" +" bne 1b" + : "=&r" (result), "=&r" (tmp) + : "r" (&v->counter), "Ir" (i) + : "cc"); +} + static inline int atomic_sub_return(int i, atomic_t *v) { unsigned long tmp; int result; + smp_mb(); + __asm__ __volatile__("@ atomic_sub_return\n" "1: ldrex %0, [%2]\n" " sub %0, %0, %3\n" @@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v) : "r" (&v->counter), "Ir" (i) : "cc"); + smp_mb(); + return result; } @@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) { unsigned long oldval, res; + smp_mb(); + do { __asm__ __volatile__("@ atomic_cmpxchg\n" "ldrex %1, [%2]\n" @@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new) : "cc"); } while (res); + smp_mb(); + return oldval; } @@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v) return val; } +#define atomic_add(i, v) (void) atomic_add_return(i, v) static inline int atomic_sub_return(int i, atomic_t *v) { @@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v) return val; } +#define atomic_sub(i, v) (void) atomic_sub_return(i, v) static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { @@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) } #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define atomic_add(i, v) (void) atomic_add_return(i, v) -#define atomic_inc(v) (void) atomic_add_return(1, v) -#define atomic_sub(i, v) (void) atomic_sub_return(i, v) -#define atomic_dec(v) (void) atomic_sub_return(1, v) +#define atomic_inc(v) atomic_add(1, v) +#define atomic_dec(v) atomic_sub(1, v) #define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) #define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) @@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() #include #endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index bd4dc8ed53d5..7fce8f3b391d 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size unsigned int tmp; #endif + smp_mb(); + switch (size) { #if __LINUX_ARM_ARCH__ >= 6 case 1: @@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size __bad_xchg(ptr, size), ret = 0; break; } + smp_mb(); return ret; } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index d662a2f1fd85..83b1da6b7baa 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -815,10 +815,7 @@ __kuser_helper_start: */ __kuser_memory_barrier: @ 0xffff0fa0 - -#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP) - mcr p15, 0, r0, c7, c10, 5 @ dmb -#endif + smp_dmb usr_ret lr .align 5 diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 2e787d40d599..c7f2627385e7 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -18,12 +18,14 @@ mov r2, #1 add r1, r1, r0, lsr #3 @ Get byte offset mov r3, r2, lsl r3 @ create mask + smp_dmb 1: ldrexb r2, [r1] ands r0, r2, r3 @ save old value of bit \instr r2, r2, r3 @ toggle bit strexb ip, r2, [r1] cmp ip, #0 bne 1b + smp_dmb cmp r0, #0 movne r0, #1 2: mov pc, lr From ecd322c9b3e4ac70f9f108badde3eb6b99c7993d Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Thu, 28 May 2009 16:07:39 -0400 Subject: [PATCH 533/670] [ARM] Add cmpxchg support for ARMv6+ systems (v5) Add cmpxchg/cmpxchg64 support for ARMv6K and ARMv7 systems (original patch from Catalin Marinas ) The cmpxchg and cmpxchg64 functions can be implemented using the LDREX*/STREX* instructions. Since operand lengths other than 32bit are required, the full implementations are only available if the ARMv6K extensions are present (for the LDREXB, LDREXH and LDREXD instructions). For ARMv6, only 32-bits cmpxchg is available. Mathieu : Make cmpxchg_local always available with best implementation for all type sizes (1, 2, 4 bytes). Make cmpxchg64_local always available. Use "Ir" constraint for "old" operand, like atomic.h atomic_cmpxchg does. Change since v3 : - Add "memory" clobbers (thanks to Nicolas Pitre) - removed __asmeq(), only needed for old compilers, very unlikely on ARMv6+. Note : ARMv7-M should eventually be ifdefed-out of cmpxchg64. But it's not supported by the Linux kernel currently. Put back arm < v6 cmpxchg support. Signed-off-by: Mathieu Desnoyers CC: Catalin Marinas CC: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/system.h | 173 ++++++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+) diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 7fce8f3b391d..d65b2f5bf41f 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -319,6 +319,12 @@ extern void enable_hlt(void); #include +#if __LINUX_ARM_ARCH__ < 6 + +#ifdef CONFIG_SMP +#error "SMP is not supported on this platform" +#endif + /* * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make * them available. @@ -332,6 +338,173 @@ extern void enable_hlt(void); #include #endif +#else /* __LINUX_ARM_ARCH__ >= 6 */ + +extern void __bad_cmpxchg(volatile void *ptr, int size); + +/* + * cmpxchg only support 32-bits operands on ARMv6. + */ + +static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long oldval, res; + + switch (size) { +#ifdef CONFIG_CPU_32v6K + case 1: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexb %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexbeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + case 2: + do { + asm volatile("@ __cmpxchg1\n" + " ldrexh %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexheq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; +#endif /* CONFIG_CPU_32v6K */ + case 4: + do { + asm volatile("@ __cmpxchg4\n" + " ldrex %1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " strexeq %0, %4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (old), "r" (new) + : "memory", "cc"); + } while (res); + break; + default: + __bad_cmpxchg(ptr, size); + oldval = 0; + } + + return oldval; +} + +static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + smp_mb(); + ret = __cmpxchg(ptr, old, new, size); + smp_mb(); + + return ret; +} + +#define cmpxchg(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +static inline unsigned long __cmpxchg_local(volatile void *ptr, + unsigned long old, + unsigned long new, int size) +{ + unsigned long ret; + + switch (size) { +#ifndef CONFIG_CPU_32v6K + case 1: + case 2: + ret = __cmpxchg_local_generic(ptr, old, new, size); + break; +#endif /* !CONFIG_CPU_32v6K */ + default: + ret = __cmpxchg(ptr, old, new, size); + } + + return ret; +} + +#define cmpxchg_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr)))) + +#ifdef CONFIG_CPU_32v6K + +/* + * Note : ARMv7-M (currently unsupported by Linux) does not support + * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should + * not be allowed to use __cmpxchg64. + */ +static inline unsigned long long __cmpxchg64(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + register unsigned long long oldval asm("r0"); + register unsigned long long __old asm("r2") = old; + register unsigned long long __new asm("r4") = new; + unsigned long res; + + do { + asm volatile( + " @ __cmpxchg8\n" + " ldrexd %1, %H1, [%2]\n" + " mov %0, #0\n" + " teq %1, %3\n" + " teqeq %H1, %H3\n" + " strexdeq %0, %4, %H4, [%2]\n" + : "=&r" (res), "=&r" (oldval) + : "r" (ptr), "Ir" (__old), "r" (__new) + : "memory", "cc"); + } while (res); + + return oldval; +} + +static inline unsigned long long __cmpxchg64_mb(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + unsigned long long ret; + + smp_mb(); + ret = __cmpxchg64(ptr, old, new); + smp_mb(); + + return ret; +} + +#define cmpxchg64(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#define cmpxchg64_local(ptr,o,n) \ + ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n))) + +#else /* !CONFIG_CPU_32v6K */ + +#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +#endif /* CONFIG_CPU_32v6K */ + +#endif /* __LINUX_ARM_ARCH__ >= 6 */ + #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) From f42706c90470851fd2e97eda7a4109e8949bde8a Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 1 May 2009 17:21:11 +0200 Subject: [PATCH 534/670] USB: atmel-usba-udc : fix control out requests. usbtest #14 was failing with "udc: ep0: TXCOMP: Invalid endpoint state 2, halting endpoint..." This occured since ep0 is bidirectional and ep->is_in is not valid (must always use ep->state) Signed-off-by: Martin Fuzzey Acked-by: David Brownell Acked-by: Haavard Skinnemoen Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/atmel_usba_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 563d57275448..5644897c1c5d 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -794,7 +794,8 @@ usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) if (ep->desc) { list_add_tail(&req->queue, &ep->queue); - if (ep->is_in || (ep_is_control(ep) + if ((!ep_is_control(ep) && ep->is_in) || + (ep_is_control(ep) && (ep->state == DATA_STAGE_IN || ep->state == STATUS_STAGE_IN))) usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); From fe92c9e481a147a9e1e14f55870f32903b967777 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 4 May 2009 17:22:43 -0700 Subject: [PATCH 535/670] USB: atmel_usb_udc: Use kzalloc() to allocate ep structures This ensures that all fields are properly initialized. Signed-off-by: Haavard Skinnemoen Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/atmel_usba_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 5644897c1c5d..05c913cc3658 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1941,7 +1941,7 @@ static int __init usba_udc_probe(struct platform_device *pdev) usba_writel(udc, CTRL, USBA_DISABLE_MASK); clk_disable(pclk); - usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep, + usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep, GFP_KERNEL); if (!usba_ep) goto err_alloc_ep; From cab98a0a349829b145d924c0649a2d30cd6a9e3d Mon Sep 17 00:00:00 2001 From: Xiao Kaijian Date: Fri, 8 May 2009 00:48:23 +0800 Subject: [PATCH 536/670] USB: Yet another Conexant Clone to add to cdc-acm.c This patch adds another quirky Conexant USB Modem Clone to usb cdc-acm.c Signed-off-by: Xiao Kaijian Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 0a69c0977e3f..7a1164dd1d37 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1375,6 +1375,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ From 0afb20e00b5053170c85298fed842b32d20b4ea9 Mon Sep 17 00:00:00 2001 From: Warren Free Date: Fri, 8 May 2009 10:27:08 +0200 Subject: [PATCH 537/670] USB: isp1760: urb_dequeue doesn't always find the urbs The option driver (and presumably others) allocates several URBs when it opens and tries to free them when it closes. The isp1760_urb_dequeue function gets called, but the packet being dequeued is not necessarily at the front of one of the 32 queues. If not, the isp1760_urb_done function doesn't get called for the URB and the process trying to free it hangs forever on a wait_queue. This patch does two things. If the URB being dequeued has others queued behind it, it re-queues them. And it searches the queues looking for the URB being dequeued rather than just looking at the one at the front of the queue. [bigeasy@linutronix] whitespace fixes, reformating Cc: stable Signed-off-by: Warren Free Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index cd07ea3f0c63..15438469f21a 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1658,6 +1658,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 reg_base, or_reg, skip_reg; unsigned long flags; struct ptd ptd; + packet_enqueue *pe; switch (usb_pipetype(urb->pipe)) { case PIPE_ISOCHRONOUS: @@ -1669,6 +1670,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = INT_REGS_OFFSET; or_reg = HC_INT_IRQ_MASK_OR_REG; skip_reg = HC_INT_PTD_SKIPMAP_REG; + pe = enqueue_an_INT_packet; break; default: @@ -1676,6 +1678,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, reg_base = ATL_REGS_OFFSET; or_reg = HC_ATL_IRQ_MASK_OR_REG; skip_reg = HC_ATL_PTD_SKIPMAP_REG; + pe = enqueue_an_ATL_packet; break; } @@ -1687,6 +1690,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, u32 skip_map; u32 or_map; struct isp1760_qtd *qtd; + struct isp1760_qh *qh = ints->qh; skip_map = isp1760_readl(hcd->regs + skip_reg); skip_map |= 1 << i; @@ -1699,8 +1703,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base + i * sizeof(ptd), sizeof(ptd)); qtd = ints->qtd; - - clean_up_qtdlist(qtd); + qtd = clean_up_qtdlist(qtd); free_mem(priv, ints->payload); @@ -1711,7 +1714,24 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, ints->payload = 0; isp1760_urb_done(priv, urb, status); + if (qtd) + pe(hcd, qh, qtd); break; + + } else if (ints->qtd) { + struct isp1760_qtd *qtd, *prev_qtd = ints->qtd; + + for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) { + if (qtd->urb == urb) { + prev_qtd->hw_next = clean_up_qtdlist(qtd); + isp1760_urb_done(priv, urb, status); + break; + } + prev_qtd = qtd; + } + /* we found the urb before the end of the list */ + if (qtd) + break; } ints++; } From 0a3c8549ea7e94d74a41096d42bc6cdf43d183bf Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 27 May 2009 11:25:52 -0400 Subject: [PATCH 538/670] usb-serial: fix crash when sub-driver updates firmware This patch (as1244) fixes a crash in usb-serial that occurs when a sub-driver returns a positive value from its attach method, indicating that new firmware was loaded and the device will disconnect and reconnect. The usb-serial core then skips the step of registering the port devices; when the disconnect occurs, the attempt to unregister the ports fails dramatically. This problem shows up with Keyspan devices and it might affect others as well. When the attach method returns a positive value, the patch sets num_ports to 0. This tells usb_serial_disconnect() not to try unregistering any of the ports; instead they are cleaned up by destroy_serial(). Signed-off-by: Alan Stern Tested-by: Benjamin Herrenschmidt Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 0a566eea49c0..f331e2bde88a 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -974,6 +974,7 @@ int usb_serial_probe(struct usb_interface *interface, if (retval > 0) { /* quietly accept this device, but don't bind to a serial port as it's about to disappear */ + serial->num_ports = 0; goto exit; } } From 29868b281f6d057b4cbe348f4483f1717c021c5c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 20 May 2009 08:49:48 -0400 Subject: [PATCH 539/670] Revert "USB: Correct Makefile to make isp1760 buildable" This reverts commit 26e1287594864169577327fef233befc9739be3b. A larger patch (f7e7aa585) a few days after this one added the same line to the Makefile, but in a different place. While it'd be more correct to revert that one, it's easier to revert this one because this is a one-liner. Signed-off-by: Mike Frysinger CC: Greg Kroah-Hartman CC: linux-usb@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 0716cdb44cd8..0a3dc5ece634 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ -obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_FHCI_HCD) += host/ From 086a377edc969aea6c761176a7e4ff68f264d6fe Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 7 May 2009 12:36:53 -0700 Subject: [PATCH 540/670] sysfs: file.c: use create_singlethread_workqueue() We don't need a kernel thread per CPU for this application. Acked-by: Alex Chiang Cc: Lai Jiangshan Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index b1606e07b7a3..561a9c050cef 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -723,7 +723,7 @@ int sysfs_schedule_callback(struct kobject *kobj, void (*func)(void *), mutex_unlock(&sysfs_workq_mutex); if (sysfs_workqueue == NULL) { - sysfs_workqueue = create_workqueue("sysfsd"); + sysfs_workqueue = create_singlethread_workqueue("sysfsd"); if (sysfs_workqueue == NULL) { module_put(owner); return -ENOMEM; From 5c8563d773c0e9f0ac2a552e84806decd98ce732 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Thu, 28 May 2009 14:24:07 -0700 Subject: [PATCH 541/670] Driver Core: do not oops when driver_unregister() is called for unregistered drivers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We also fix a problem with cleaning up properly when initializing drivers and devices, so checks like this will work successfully. Portions of the patch by Linus and Greg and Ingo. Reported-by: Ozan Çağlayan Signed-off-by: Kay Sievers Cc: Linus Torvalds Cc: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 4 +++- drivers/base/core.c | 5 ++++- drivers/base/driver.c | 4 ++++ 3 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index dc030f1f00f1..c6599618523e 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -700,8 +700,10 @@ int bus_add_driver(struct device_driver *drv) } kobject_uevent(&priv->kobj, KOBJ_ADD); - return error; + return 0; out_unregister: + kfree(drv->p); + drv->p = NULL; kobject_put(&priv->kobj); out_put_bus: bus_put(bus); diff --git a/drivers/base/core.c b/drivers/base/core.c index 4aa527b8a913..1977d4beb89e 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -879,7 +879,7 @@ int device_add(struct device *dev) } if (!dev_name(dev)) - goto done; + goto name_error; pr_debug("device: '%s': %s\n", dev_name(dev), __func__); @@ -978,6 +978,9 @@ done: cleanup_device_parent(dev); if (parent) put_device(parent); +name_error: + kfree(dev->p); + dev->p = NULL; goto done; } diff --git a/drivers/base/driver.c b/drivers/base/driver.c index c51f11bb29ae..8ae0f63602e0 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -257,6 +257,10 @@ EXPORT_SYMBOL_GPL(driver_register); */ void driver_unregister(struct device_driver *drv) { + if (!drv || !drv->p) { + WARN(1, "Unexpected driver unregister!\n"); + return; + } driver_remove_groups(drv, drv->groups); bus_remove_driver(drv); } From 2f102607ac77354b02a76cf2748598ce9f270f08 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 27 May 2009 23:59:58 -0400 Subject: [PATCH 542/670] i7300_idle: allow testing on i5000-series hardware w/o re-compile Testing the i7300_idle driver on i5000-series hardware required an edit to i7300_idle.h to "#define SUPPORT_I5000 1" and a re-build of both i7300_idle and ioat_dma. Replace that build-time scheme with a load-time module parameter: "7300_idle.forceload=1" to make it easier to test the driver on hardware that while not officially validated, works fine and is much more commonly available. By default (no modparam) the driver will continue to load only on the i7300. Note that ioat_dma runs a copy of i7300_idle's probe routine to know to reserve an IOAT channel for i7300_idle. This change makes ioat_dma do that always on the i5000, just like it does on the i7300. Signed-off-by: Len Brown Acked-by: Andrew Henroid --- drivers/dma/ioat_dma.c | 2 +- drivers/idle/i7300_idle.c | 6 +++++- include/linux/i7300_idle.h | 20 ++++++++++---------- 3 files changed, 16 insertions(+), 12 deletions(-) diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c index 1955ee8d6d20..a600fc0f7962 100644 --- a/drivers/dma/ioat_dma.c +++ b/drivers/dma/ioat_dma.c @@ -173,7 +173,7 @@ static int ioat_dma_enumerate_channels(struct ioatdma_device *device) xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale)); #ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL - if (i7300_idle_platform_probe(NULL, NULL) == 0) { + if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) { device->common.chancnt--; } #endif diff --git a/drivers/idle/i7300_idle.c b/drivers/idle/i7300_idle.c index bf740394d704..949c97ff57e3 100644 --- a/drivers/idle/i7300_idle.c +++ b/drivers/idle/i7300_idle.c @@ -41,6 +41,10 @@ static int debug; module_param_named(debug, debug, uint, 0644); MODULE_PARM_DESC(debug, "Enable debug printks in this driver"); +static int forceload; +module_param_named(forceload, forceload, uint, 0644); +MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000"); + #define dprintk(fmt, arg...) \ do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0) @@ -552,7 +556,7 @@ static int __init i7300_idle_init(void) cpus_clear(idle_cpumask); total_us = 0; - if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev)) + if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload)) return -ENODEV; if (i7300_idle_thrt_save()) diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h index 05a80c44513c..1587b7dec505 100644 --- a/include/linux/i7300_idle.h +++ b/include/linux/i7300_idle.h @@ -16,35 +16,33 @@ struct fbd_ioat { unsigned int vendor; unsigned int ioat_dev; + unsigned int enabled; }; /* * The i5000 chip-set has the same hooks as the i7300 - * but support is disabled by default because this driver - * has not been validated on that platform. + * but it is not enabled by default and must be manually + * manually enabled with "forceload=1" because it is + * only lightly validated. */ -#define SUPPORT_I5000 0 static const struct fbd_ioat fbd_ioat_list[] = { - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB}, -#if SUPPORT_I5000 - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT}, -#endif + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1}, + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0}, {0, 0} }; /* table of devices that work with this driver */ static const struct pci_device_id pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) }, -#if SUPPORT_I5000 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) }, -#endif { } /* Terminating entry */ }; /* Check for known platforms with I/O-AT */ static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev, - struct pci_dev **ioat_dev) + struct pci_dev **ioat_dev, + int enable_all) { int i; struct pci_dev *memdev, *dmadev; @@ -69,6 +67,8 @@ static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev, for (i = 0; fbd_ioat_list[i].vendor != 0; i++) { if (dmadev->vendor == fbd_ioat_list[i].vendor && dmadev->device == fbd_ioat_list[i].ioat_dev) { + if (!(fbd_ioat_list[i].enabled || enable_all)) + continue; if (fbd_dev) *fbd_dev = memdev; if (ioat_dev) From 10b6d95612672f89deb39b5a60fb677c78ba4844 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 28 May 2009 11:23:02 +0000 Subject: [PATCH 543/670] cxgb3: fix dma mapping regression Commit 5e68b772e6efd189d6aca76f6872fb75d51ace60 cxgb3: map entire Rx page, feed map+offset to Rx ring. introduced a regression on platforms defining DECLARE_PCI_UNMAP_ADDR() and related macros as no-ops. Rx descriptors are fed with the a page buffer bus address + page chunk offset. The page buffer bus address is set and retrieved through pci_unamp_addr_set(), pci_unmap_addr(). These functions being meaningless on x86 (if CONFIG_DMA_API_DEBUG is not set). The HW ends up with a bogus bus address. This patch saves the page buffer bus address for all plaftorms. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/adapter.h | 4 ++-- drivers/net/cxgb3/sge.c | 11 +++++------ 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h index 714df2b675e6..c888e97c9671 100644 --- a/drivers/net/cxgb3/adapter.h +++ b/drivers/net/cxgb3/adapter.h @@ -85,8 +85,8 @@ struct fl_pg_chunk { struct page *page; void *va; unsigned int offset; - u64 *p_cnt; - DECLARE_PCI_UNMAP_ADDR(mapping); + unsigned long *p_cnt; + dma_addr_t mapping; }; struct rx_desc; diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 26d3587f3399..b3ee2bc1a005 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -355,7 +355,7 @@ static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q, (*d->pg_chunk.p_cnt)--; if (!*d->pg_chunk.p_cnt) pci_unmap_page(pdev, - pci_unmap_addr(&d->pg_chunk, mapping), + d->pg_chunk.mapping, q->alloc_size, PCI_DMA_FROMDEVICE); put_page(d->pg_chunk.page); @@ -454,7 +454,7 @@ static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q, q->pg_chunk.offset = 0; mapping = pci_map_page(adapter->pdev, q->pg_chunk.page, 0, q->alloc_size, PCI_DMA_FROMDEVICE); - pci_unmap_addr_set(&q->pg_chunk, mapping, mapping); + q->pg_chunk.mapping = mapping; } sd->pg_chunk = q->pg_chunk; @@ -511,8 +511,7 @@ static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp) nomem: q->alloc_failed++; break; } - mapping = pci_unmap_addr(&sd->pg_chunk, mapping) + - sd->pg_chunk.offset; + mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset; pci_unmap_addr_set(sd, dma_addr, mapping); add_one_rx_chunk(mapping, d, q->gen); @@ -881,7 +880,7 @@ recycle: (*sd->pg_chunk.p_cnt)--; if (!*sd->pg_chunk.p_cnt) pci_unmap_page(adap->pdev, - pci_unmap_addr(&sd->pg_chunk, mapping), + sd->pg_chunk.mapping, fl->alloc_size, PCI_DMA_FROMDEVICE); if (!skb) { @@ -2096,7 +2095,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, (*sd->pg_chunk.p_cnt)--; if (!*sd->pg_chunk.p_cnt) pci_unmap_page(adap->pdev, - pci_unmap_addr(&sd->pg_chunk, mapping), + sd->pg_chunk.mapping, fl->alloc_size, PCI_DMA_FROMDEVICE); From c22c8149313ee85c912e7b77a7afd04be8b8cba8 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Thu, 28 May 2009 11:23:08 +0000 Subject: [PATCH 544/670] cxgb3: link fault fixes Do not call t3_link_fault() under spinlock, as it calls msleep(). Besides, only the access to pi->link_fault needs to be serialized. Also initialize local variables before checking the link status, link state fields might otherwise end up containing garbage. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 8 +++++--- drivers/net/cxgb3/t3_hw.c | 5 +++++ 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 7ea48414c6cb..17858b9a5830 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2496,14 +2496,16 @@ static void check_link_status(struct adapter *adapter) for_each_port(adapter, i) { struct net_device *dev = adapter->port[i]; struct port_info *p = netdev_priv(dev); + int link_fault; spin_lock_irq(&adapter->work_lock); - if (p->link_fault) { + link_fault = p->link_fault; + spin_unlock_irq(&adapter->work_lock); + + if (link_fault) { t3_link_fault(adapter, i); - spin_unlock_irq(&adapter->work_lock); continue; } - spin_unlock_irq(&adapter->work_lock); if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) { t3_xgm_intr_disable(adapter, i); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 4f68aeb2679a..4950d5d789ae 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -1274,6 +1274,11 @@ void t3_link_fault(struct adapter *adapter, int port_id) A_XGM_INT_STATUS + mac->offset); link_fault &= F_LINKFAULTCHANGE; + link_ok = lc->link_ok; + speed = lc->speed; + duplex = lc->duplex; + fc = lc->fc; + phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); if (link_fault) { From 4e0168fa4842e27795a75b205a510f25b62181d9 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Thu, 28 May 2009 02:05:53 +0000 Subject: [PATCH 545/670] mac8390: fix build with NET_POLL_CONTROLLER Fix the build for CONFIG_NET_POLL_CONTROLLER that I broke with 217cbfa856dc1cbc2890781626c4032d9e3ec59f ("mac8390: fix regression caused during net_device_ops conversion"). Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/mac8390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c index f26667d5eaae..22e74a0e0361 100644 --- a/drivers/net/mac8390.c +++ b/drivers/net/mac8390.c @@ -489,7 +489,7 @@ static const struct net_device_ops mac8390_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, + .ndo_poll_controller = __ei_poll, #endif }; From 6daad5c6c586bf07528ae5b39e801b204468f907 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 29 May 2009 10:15:08 +0100 Subject: [PATCH 546/670] [ARM] update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 131 +++++++++++++++++++++++++++++++++++--- 1 file changed, 122 insertions(+), 9 deletions(-) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 945e0d237a1d..fec64678a63a 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Mar 23 20:09:01 2009 +# Last update: Fri May 29 10:14:20 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905 apf9328 MACH_APF9328 APF9328 906 omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -palmt650 MACH_PALMT650 PALMT650 909 +treo650 MACH_TREO650 TREO650 909 acumen MACH_ACUMEN ACUMEN 910 xp100 MACH_XP100 XP100 911 fs2410 MACH_FS2410 FS2410 912 @@ -1232,7 +1232,7 @@ ql202b MACH_QL202B QL202B 1226 vpac270 MACH_VPAC270 VPAC270 1227 rd129 MACH_RD129 RD129 1228 htcwizard MACH_HTCWIZARD HTCWIZARD 1229 -xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230 +treo680 MACH_TREO680 TREO680 1230 tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231 zylonite MACH_ZYLONITE ZYLONITE 1233 gene1270 MACH_GENE1270 GENE1270 1234 @@ -1418,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417 cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 app3xx MACH_APP3XX APP3XX 1419 sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421 -palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422 -palmtreo750 MACH_PALMTREO750 PALMTREO750 1423 -palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424 +treo700p MACH_TREO700P TREO700P 1421 +treo700w MACH_TREO700W TREO700W 1422 +treo750 MACH_TREO750 TREO750 1423 +treo755p MACH_TREO755P TREO755P 1424 ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 sarge MACH_SARGE SARGE 1426 a696 MACH_A696 A696 1427 @@ -1721,7 +1721,7 @@ sapphire MACH_SAPPHIRE SAPPHIRE 1729 csb637xo MACH_CSB637XO CSB637XO 1730 evisiong MACH_EVISIONG EVISIONG 1731 stmp37xx MACH_STMP37XX STMP37XX 1732 -stmp378x MACH_STMP38XX STMP38XX 1733 +stmp378x MACH_STMP378X STMP378X 1733 tnt MACH_TNT TNT 1734 tbxt MACH_TBXT TBXT 1735 playmate MACH_PLAYMATE PLAYMATE 1736 @@ -1817,7 +1817,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826 tavorevb MACH_TAVOREVB TAVOREVB 1827 saar MACH_SAAR SAAR 1828 deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829 -at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830 +at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830 linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831 hit_b0 MACH_HIT_B0 HIT_B0 1832 adx_rmu MACH_ADX_RMU ADX_RMU 1833 @@ -2132,3 +2132,116 @@ apollo MACH_APOLLO APOLLO 2141 at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142 spc300 MACH_SPC300 SPC300 2143 eko MACH_EKO EKO 2144 +ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145 +ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146 +m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147 +str9104nas MACH_STAR9104NAS STAR9104NAS 2148 +pca100 MACH_PCA100 PCA100 2149 +z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150 +hipox MACH_HIPOX HIPOX 2151 +omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152 +bm150r MACH_BM150R BM150R 2153 +tbone MACH_TBONE TBONE 2154 +merlin MACH_MERLIN MERLIN 2155 +falcon MACH_FALCON FALCON 2156 +davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157 +s5p6440 MACH_S5P6440 S5P6440 2158 +at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159 +omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160 +lpc313x MACH_LPC313X LPC313X 2161 +magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162 +magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163 +magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164 +meesc MACH_MEESC MEESC 2165 +otc570 MACH_OTC570 OTC570 2166 +bcu2412 MACH_BCU2412 BCU2412 2167 +beacon MACH_BEACON BEACON 2168 +actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169 +e4430 MACH_E4430 E4430 2170 +ql300 MACH_QL300 QL300 2171 +btmavb101 MACH_BTMAVB101 BTMAVB101 2172 +btmawb101 MACH_BTMAWB101 BTMAWB101 2173 +sq201 MACH_SQ201 SQ201 2174 +quatro45xx MACH_QUATRO45XX QUATRO45XX 2175 +openpad MACH_OPENPAD OPENPAD 2176 +tx25 MACH_TX25 TX25 2177 +omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178 +htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179 +lal43 MACH_LAL43 LAL43 2181 +htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182 +anw6410 MACH_ANW6410 ANW6410 2183 +htcprophet MACH_HTCPROPHET HTCPROPHET 2185 +cfa_10022 MACH_CFA_10022 CFA_10022 2186 +imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187 +px2imx27 MACH_PX2IMX27 PX2IMX27 2188 +stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189 +dvs10 MACH_DVS10 DVS10 2190 +portuxg20 MACH_PORTUXG20 PORTUXG20 2191 +arm_spv MACH_ARM_SPV ARM_SPV 2192 +smdkc110 MACH_SMDKC110 SMDKC110 2193 +cabespresso MACH_CABESPRESSO CABESPRESSO 2194 +hmc800 MACH_HMC800 HMC800 2195 +sholes MACH_SHOLES SHOLES 2196 +btmxc31 MACH_BTMXC31 BTMXC31 2197 +dt501 MACH_DT501 DT501 2198 +ktx MACH_KTX KTX 2199 +omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200 +netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201 +netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202 +d2net_v2 MACH_D2NET_V2 D2NET_V2 2203 +net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204 +net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205 +net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206 +endb2443 MACH_ENDB2443 ENDB2443 2207 +inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208 +tros MACH_TROS TROS 2209 +pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210 +ofsp8 MACH_OFSP8 OFSP8 2211 +at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212 +guf_cupid MACH_GUF_CUPID GUF_CUPID 2213 +eab1r MACH_EAB1R EAB1R 2214 +desirec MACH_DESIREC DESIREC 2215 +cordoba MACH_CORDOBA CORDOBA 2216 +irvine MACH_IRVINE IRVINE 2217 +sff772 MACH_SFF772 SFF772 2218 +pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219 +pc7302 MACH_PC7302 PC7302 2220 +bip6000 MACH_BIP6000 BIP6000 2221 +silvermoon MACH_SILVERMOON SILVERMOON 2222 +vc0830 MACH_VC0830 VC0830 2223 +dt430 MACH_DT430 DT430 2224 +ji42pf MACH_JI42PF JI42PF 2225 +gnet_ksm MACH_GNET_KSM GNET_KSM 2226 +gnet_sgm MACH_GNET_SGM GNET_SGM 2227 +gnet_sgr MACH_GNET_SGR GNET_SGR 2228 +omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229 +pnp MACH_PNP PNP 2230 +ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231 +ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232 +sas_c MACH_SAS_C SAS_C 2233 +vma2315 MACH_VMA2315 VMA2315 2234 +vcs MACH_VCS VCS 2235 +spear600 MACH_SPEAR600 SPEAR600 2236 +spear300 MACH_SPEAR300 SPEAR300 2237 +spear1300 MACH_SPEAR1300 SPEAR1300 2238 +lilly1131 MACH_LILLY1131 LILLY1131 2239 +arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240 +mapphone MACH_MAPPHONE MAPPHONE 2241 +legend MACH_LEGEND LEGEND 2242 +salsa MACH_SALSA SALSA 2243 +lounge MACH_LOUNGE LOUNGE 2244 +vision MACH_VISION VISION 2245 +vmb20 MACH_VMB20 VMB20 2246 +hy2410 MACH_HY2410 HY2410 2247 +hy9315 MACH_HY9315 HY9315 2248 +bullwinkle MACH_BULLWINKLE BULLWINKLE 2249 +arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250 +vs_v210 MACH_VS_V210 VS_V210 2252 +vs_v212 MACH_VS_V212 VS_V212 2253 +hmt MACH_HMT HMT 2254 +suen3 MACH_SUEN3 SUEN3 2255 +vesper MACH_VESPER VESPER 2256 +str9 MACH_STR9 STR9 2257 +omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258 +simcom MACH_SIMCOM SIMCOM 2259 +mcwebio MACH_MCWEBIO MCWEBIO 2260 From 8541c1180a355c4da283fc6b03a92c0233823c1b Mon Sep 17 00:00:00 2001 From: Vladimir Barinov Date: Thu, 23 Apr 2009 15:47:22 +0400 Subject: [PATCH 547/670] mtd: MXC NAND driver fixes (v5) The following patch fixes: - re-initialization of host->col_addr which is used as byte index between the successive READID flash commands. - compile error when CONFIG_PM is enabled - pass on the error code from clk_get() - return -ENOMEM in case of failed ioremap() - pass on the return value of platform_driver_probe() directly - remove excessive printk - let command line partition table parsing with mxc_nand name. The cmd_line parsing is done via name that differs from mxc_nand by default and looks like "NAND 256MiB 1,8V 8-bit" Signed-off-by: Vladimir Barinov Signed-off-by: Lothar Wassmann Acked-by: Sascha Hauer Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/mxc_nand.c | 43 ++++++++++++++++++++----------------- 1 file changed, 23 insertions(+), 20 deletions(-) diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index f3548d048014..40c26080ecda 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -831,6 +831,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command, break; case NAND_CMD_READID: + host->col_addr = 0; send_read_id(host); break; @@ -867,6 +868,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) mtd->priv = this; mtd->owner = THIS_MODULE; mtd->dev.parent = &pdev->dev; + mtd->name = "mxc_nand"; /* 50 us command delay time */ this->chip_delay = 5; @@ -882,8 +884,10 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->verify_buf = mxc_nand_verify_buf; host->clk = clk_get(&pdev->dev, "nfc"); - if (IS_ERR(host->clk)) + if (IS_ERR(host->clk)) { + err = PTR_ERR(host->clk); goto eclk; + } clk_enable(host->clk); host->clk_act = 1; @@ -896,7 +900,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) host->regs = ioremap(res->start, res->end - res->start + 1); if (!host->regs) { - err = -EIO; + err = -ENOMEM; goto eres; } @@ -1011,30 +1015,35 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n"); - if (info) - ret = info->suspend(info); - - /* Disable the NFC clock */ - clk_disable(nfc_clk); /* FIXME */ + if (mtd) { + ret = mtd->suspend(mtd); + /* Disable the NFC clock */ + clk_disable(host->clk); + } return ret; } static int mxcnd_resume(struct platform_device *pdev) { - struct mtd_info *info = platform_get_drvdata(pdev); + struct mtd_info *mtd = platform_get_drvdata(pdev); + struct nand_chip *nand_chip = mtd->priv; + struct mxc_nand_host *host = nand_chip->priv; int ret = 0; DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n"); - /* Enable the NFC clock */ - clk_enable(nfc_clk); /* FIXME */ - if (info) - info->resume(info); + if (mtd) { + /* Enable the NFC clock */ + clk_enable(host->clk); + mtd->resume(mtd); + } return ret; } @@ -1055,13 +1064,7 @@ static struct platform_driver mxcnd_driver = { static int __init mxc_nd_init(void) { - /* Register the device driver structure. */ - pr_info("MXC MTD nand Driver\n"); - if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) { - printk(KERN_ERR "Driver register failed for mxcnd_driver\n"); - return -ENODEV; - } - return 0; + return platform_driver_probe(&mxcnd_driver, mxcnd_probe); } static void __exit mxc_nd_cleanup(void) From 81e2962801bbb4e740c501ca687d5cb857929c04 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Thu, 28 May 2009 17:43:59 +0200 Subject: [PATCH 548/670] jffs2: Fix corruption when flash erase/write failure Erase errors such as: "Newly-erased block contained word 0xa4ef223e at offset 0x0296a014" and failure to write the clean marker, moves the offending erase block to erasing list before calling jffs2_erase_failed(). This is bad as jffs2_erase_failed() will also move the block to the bad_list, but is now moving the wrong block, causing FS corruption. Signed-off-by: Joakim Tjernlund Signed-off-by: David Woodhouse --- fs/jffs2/erase.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index c32b4a1ad6cf..a0244740b75a 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -480,13 +480,6 @@ static void jffs2_mark_erased_block(struct jffs2_sb_info *c, struct jffs2_eraseb return; filebad: - mutex_lock(&c->erase_free_sem); - spin_lock(&c->erase_completion_lock); - /* Stick it on a list (any list) so erase_failed can take it - right off again. Silly, but shouldn't happen often. */ - list_move(&jeb->list, &c->erasing_list); - spin_unlock(&c->erase_completion_lock); - mutex_unlock(&c->erase_free_sem); jffs2_erase_failed(c, jeb, bad_offset); return; From 21a4cc00e8e67edcfc1bdb9af6d370ed1226eb86 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 28 May 2009 11:39:02 +0200 Subject: [PATCH 549/670] at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan http://bugzilla.kernel.org/show_bug.cgi?id=13312 at76_dwork_hw_scan holds a mutex while calling ieee80211_scan_completed, which then calls at76_config which needs the same mutex. This reworks the ordering to not hold the lock while calling ieee80211_scan_completed. Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 744f4f4dd3d1..8d93ca4651b9 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1873,18 +1873,18 @@ static void at76_dwork_hw_scan(struct work_struct *work) if (ret != CMD_STATUS_COMPLETE) { queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan, SCAN_POLL_INTERVAL); - goto exit; + mutex_unlock(&priv->mtx); + return; } - ieee80211_scan_completed(priv->hw, false); - if (is_valid_ether_addr(priv->bssid)) at76_join(priv); - ieee80211_wake_queues(priv->hw); - -exit: mutex_unlock(&priv->mtx); + + ieee80211_scan_completed(priv->hw, false); + + ieee80211_wake_queues(priv->hw); } static int at76_hw_scan(struct ieee80211_hw *hw, From aeeab4ff06b8e29cfe2fe730ba626f7e2487ba03 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 27 May 2009 09:21:57 +0200 Subject: [PATCH 550/670] rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle http://bugzilla.kernel.org/show_bug.cgi?id=13383 Reported-by: Przemyslaw Kulczycki Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/rtl818x/rtl8187_dev.c | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 8a0823588c51..3d94e7dfea69 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -430,6 +430,7 @@ config RTL8187 ASUS P5B Deluxe Toshiba Satellite Pro series of laptops Asus Wireless Link + Linksys WUSB54GC-EU Thanks to Realtek for their support! diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index bac6cfba6abd..d51ba0a88c23 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -71,6 +71,8 @@ static struct usb_device_id rtl8187_table[] __devinitdata = { {USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187}, /* AirLive */ {USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187}, + /* Linksys */ + {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B}, {} }; From 681a1b4032d72f4ad6d4beed751bc65574572746 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 28 May 2009 14:34:18 -0700 Subject: [PATCH 551/670] MAINTAINERS: pair EDAC-E752X P: and M: entries Entries should be P: name then M: email address. Signed-off-by: Joe Perches Acked-by: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5ee166e27b9f..ea4eced29a5c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1971,8 +1971,8 @@ F: include/linux/edac.h EDAC-E752X P: Mark Gross -P: Doug Thompson M: mark.gross@intel.com +P: Doug Thompson M: dougthompson@xmission.com L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers) W: bluesmoke.sourceforge.net From 6d2661ede5f20f968422e790af3334908c3bc857 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 28 May 2009 14:34:19 -0700 Subject: [PATCH 552/670] oom: fix possible oom_dump_tasks NULL pointer When /proc/sys/vm/oom_dump_tasks is enabled, it is possible to get a NULL pointer for tasks that have detached mm's since task_lock() is not held during the tasklist scan. Add the task_lock(). Acked-by: Nick Piggin Acked-by: Mel Gorman Cc: Rik van Riel Signed-off-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/oom_kill.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 92bcf1db16b2..a7b2460e922b 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -284,22 +284,28 @@ static void dump_tasks(const struct mem_cgroup *mem) printk(KERN_INFO "[ pid ] uid tgid total_vm rss cpu oom_adj " "name\n"); do_each_thread(g, p) { - /* - * total_vm and rss sizes do not exist for tasks with a - * detached mm so there's no need to report them. - */ - if (!p->mm) - continue; + struct mm_struct *mm; + if (mem && !task_in_mem_cgroup(p, mem)) continue; if (!thread_group_leader(p)) continue; task_lock(p); + mm = p->mm; + if (!mm) { + /* + * total_vm and rss sizes do not exist for tasks with no + * mm so there's no need to report them; they can't be + * oom killed anyway. + */ + task_unlock(p); + continue; + } printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n", - p->pid, __task_cred(p)->uid, p->tgid, - p->mm->total_vm, get_mm_rss(p->mm), (int)task_cpu(p), - p->oomkilladj, p->comm); + p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm, + get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj, + p->comm); task_unlock(p); } while_each_thread(g, p); } From b2e1feaf0af6b8a826b86748a19ddc2013ab7dbd Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 28 May 2009 14:34:20 -0700 Subject: [PATCH 553/670] cred: #include init.h in cred.h linux/cred.h can't be included as first header (alphabetical order) because it uses __init which is enough to break compilation on some archs. Signed-off-by: Alexey Dobriyan Acked-by: James Morris Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cred.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/cred.h b/include/linux/cred.h index 3282ee4318e7..4fa999696310 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -13,6 +13,7 @@ #define _LINUX_CRED_H #include +#include #include #include From bd6daba909d8484bd2ccf6017db4028d7a420927 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 28 May 2009 14:34:21 -0700 Subject: [PATCH 554/670] procfs: make errno values consistent when open pident vs exit(2) race occurs proc_pident_instantiate() has following call flow. proc_pident_lookup() proc_pident_instantiate() proc_pid_make_inode() And, proc_pident_lookup() has following error handling. const struct pid_entry *p, *last; error = ERR_PTR(-ENOENT); if (!task) goto out_no_task; Then, proc_pident_instantiate should return ENOENT too when racing against exit(2) occur. EINAL has two bad reason. - it implies caller is wrong. bad the race isn't caller's mistake. - man 2 open don't explain EINVAL. user often don't handle it. Note: Other proc_pid_make_inode() caller already use ENOENT properly. Acked-by: Eric W. Biederman Cc: Alexey Dobriyan Signed-off-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index fb45615943c2..3326bbf9ab95 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1956,7 +1956,7 @@ static struct dentry *proc_pident_instantiate(struct inode *dir, const struct pid_entry *p = ptr; struct inode *inode; struct proc_inode *ei; - struct dentry *error = ERR_PTR(-EINVAL); + struct dentry *error = ERR_PTR(-ENOENT); inode = proc_pid_make_inode(dir->i_sb, task); if (!inode) From e767e0561d7fd2333df1921f1ab4176211f9036b Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Thu, 28 May 2009 14:34:28 -0700 Subject: [PATCH 555/670] memcg: fix deadlock between lock_page_cgroup and mapping tree_lock mapping->tree_lock can be acquired from interrupt context. Then, following dead lock can occur. Assume "A" as a page. CPU0: lock_page_cgroup(A) interrupted -> take mapping->tree_lock. CPU1: take mapping->tree_lock -> lock_page_cgroup(A) This patch tries to fix above deadlock by moving memcg's hook to out of mapping->tree_lock. charge/uncharge of pagecache/swapcache is protected by page lock, not tree_lock. After this patch, lock_page_cgroup() is not called under mapping->tree_lock. Signed-off-by: KAMEZAWA Hiroyuki Signed-off-by: Daisuke Nishimura Cc: Balbir Singh Cc: Daisuke Nishimura Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/swap.h | 5 +++++ mm/filemap.c | 6 +++--- mm/memcontrol.c | 4 +++- mm/swap_state.c | 4 +--- mm/truncate.c | 1 + mm/vmscan.c | 2 ++ 6 files changed, 15 insertions(+), 7 deletions(-) diff --git a/include/linux/swap.h b/include/linux/swap.h index 62d81435347a..d476aad3ff57 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -437,6 +437,11 @@ static inline int mem_cgroup_cache_charge_swapin(struct page *page, return 0; } +static inline void +mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) +{ +} + #endif /* CONFIG_SWAP */ #endif /* __KERNEL__*/ #endif /* _LINUX_SWAP_H */ diff --git a/mm/filemap.c b/mm/filemap.c index 379ff0bcbf6e..1b60f30cebfa 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -121,7 +121,6 @@ void __remove_from_page_cache(struct page *page) mapping->nrpages--; __dec_zone_page_state(page, NR_FILE_PAGES); BUG_ON(page_mapped(page)); - mem_cgroup_uncharge_cache_page(page); /* * Some filesystems seem to re-dirty the page even after @@ -145,6 +144,7 @@ void remove_from_page_cache(struct page *page) spin_lock_irq(&mapping->tree_lock); __remove_from_page_cache(page); spin_unlock_irq(&mapping->tree_lock); + mem_cgroup_uncharge_cache_page(page); } static int sync_page(void *word) @@ -476,13 +476,13 @@ int add_to_page_cache_locked(struct page *page, struct address_space *mapping, if (likely(!error)) { mapping->nrpages++; __inc_zone_page_state(page, NR_FILE_PAGES); + spin_unlock_irq(&mapping->tree_lock); } else { page->mapping = NULL; + spin_unlock_irq(&mapping->tree_lock); mem_cgroup_uncharge_cache_page(page); page_cache_release(page); } - - spin_unlock_irq(&mapping->tree_lock); radix_tree_preload_end(); } else mem_cgroup_uncharge_cache_page(page); diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 01c2d8f14685..4a747a27a22f 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1488,8 +1488,9 @@ void mem_cgroup_uncharge_cache_page(struct page *page) __mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE); } +#ifdef CONFIG_SWAP /* - * called from __delete_from_swap_cache() and drop "page" account. + * called after __delete_from_swap_cache() and drop "page" account. * memcg information is recorded to swap_cgroup of "ent" */ void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) @@ -1506,6 +1507,7 @@ void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent) if (memcg) css_put(&memcg->css); } +#endif #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP /* diff --git a/mm/swap_state.c b/mm/swap_state.c index 3ecea98ecb45..1416e7e9e02d 100644 --- a/mm/swap_state.c +++ b/mm/swap_state.c @@ -109,8 +109,6 @@ int add_to_swap_cache(struct page *page, swp_entry_t entry, gfp_t gfp_mask) */ void __delete_from_swap_cache(struct page *page) { - swp_entry_t ent = {.val = page_private(page)}; - VM_BUG_ON(!PageLocked(page)); VM_BUG_ON(!PageSwapCache(page)); VM_BUG_ON(PageWriteback(page)); @@ -121,7 +119,6 @@ void __delete_from_swap_cache(struct page *page) total_swapcache_pages--; __dec_zone_page_state(page, NR_FILE_PAGES); INC_CACHE_INFO(del_total); - mem_cgroup_uncharge_swapcache(page, ent); } /** @@ -191,6 +188,7 @@ void delete_from_swap_cache(struct page *page) __delete_from_swap_cache(page); spin_unlock_irq(&swapper_space.tree_lock); + mem_cgroup_uncharge_swapcache(page, entry); swap_free(entry); page_cache_release(page); } diff --git a/mm/truncate.c b/mm/truncate.c index 55206fab7b99..12e1579f9165 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -359,6 +359,7 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page) BUG_ON(page_has_private(page)); __remove_from_page_cache(page); spin_unlock_irq(&mapping->tree_lock); + mem_cgroup_uncharge_cache_page(page); page_cache_release(page); /* pagecache ref */ return 1; failed: diff --git a/mm/vmscan.c b/mm/vmscan.c index 5fa3eda1f03f..d254306562cd 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -470,10 +470,12 @@ static int __remove_mapping(struct address_space *mapping, struct page *page) swp_entry_t swap = { .val = page_private(page) }; __delete_from_swap_cache(page); spin_unlock_irq(&mapping->tree_lock); + mem_cgroup_uncharge_swapcache(page, swap); swap_free(swap); } else { __remove_from_page_cache(page); spin_unlock_irq(&mapping->tree_lock); + mem_cgroup_uncharge_cache_page(page); } return 1; From b898f4f869da5b9d41f297fff87aca4cd42d80b3 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 28 May 2009 14:34:29 -0700 Subject: [PATCH 556/670] drivers/serial/mpc52xx_uart.c: fix array overindexing check The check for an overindexing of mpc52xx_uart_{ports,nodes} has an off-by-one. Signed-off-by: Roel Kluin Acked-by: Wolfram Sang Acked-by: Grant Likely Cc: Benjamin Herrenschmidt Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/mpc52xx_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 7f72f8ceaa6f..b3feb6198d57 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options) pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n", co, co->index, options); - if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) { + if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) { pr_debug("PSC%x out of range\n", co->index); return -EINVAL; } From ba9447198bdd945666a9bac5e556632a7acb235d Mon Sep 17 00:00:00 2001 From: Thomas Dahlmann Date: Thu, 28 May 2009 14:34:30 -0700 Subject: [PATCH 557/670] MAINTAINERS: change email address for Thomas Dahlmann Signed-off-by: Thomas Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index ea4eced29a5c..41c6605feb0a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -434,7 +434,7 @@ F: arch/alpha/ AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER P: Thomas Dahlmann -M: thomas.dahlmann@amd.com +M: dahlmann.thomas@arcor.de L: linux-geode@lists.infradead.org (moderated for non-subscribers) S: Supported F: drivers/usb/gadget/amd5536udc.* From c3dc5bec05a2ae03a72ef82e321d77fb549d951c Mon Sep 17 00:00:00 2001 From: Oskar Schirmer Date: Thu, 28 May 2009 14:34:31 -0700 Subject: [PATCH 558/670] flat: fix data sections alignment The flat loader uses an architecture's flat_stack_align() to align the stack but assumes word-alignment is enough for the data sections. However, on the Xtensa S6000 we have registers up to 128bit width which can be used from userspace and therefor need userspace stack and data-section alignment of at least this size. This patch drops flat_stack_align() and uses the same alignment that is required for slab caches, ARCH_SLAB_MINALIGN, or wordsize if it's not defined by the architecture. It also fixes m32r which was obviously kaput, aligning an uninitialized stack entry instead of the stack pointer. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Oskar Schirmer Cc: David Howells Cc: Russell King Cc: Bryan Wu Cc: Geert Uytterhoeven Acked-by: Paul Mundt Cc: Greg Ungerer Signed-off-by: Johannes Weiner Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/include/asm/flat.h | 3 --- arch/blackfin/include/asm/flat.h | 1 - arch/h8300/include/asm/flat.h | 1 - arch/m32r/include/asm/flat.h | 1 - arch/m68k/include/asm/flat.h | 1 - arch/sh/include/asm/flat.h | 1 - fs/binfmt_flat.c | 46 +++++++++++++++++++++----------- 7 files changed, 31 insertions(+), 23 deletions(-) diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h index 1d77e51907f6..59426a4595c9 100644 --- a/arch/arm/include/asm/flat.h +++ b/arch/arm/include/asm/flat.h @@ -5,9 +5,6 @@ #ifndef __ARM_FLAT_H__ #define __ARM_FLAT_H__ -/* An odd number of words will be pushed after this alignment, so - deliberately misalign the value. */ -#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4) #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/blackfin/include/asm/flat.h b/arch/blackfin/include/asm/flat.h index e70074e05f4e..733a178d782d 100644 --- a/arch/blackfin/include/asm/flat.h +++ b/arch/blackfin/include/asm/flat.h @@ -10,7 +10,6 @@ #include -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) diff --git a/arch/h8300/include/asm/flat.h b/arch/h8300/include/asm/flat.h index 2a873508a9a1..bd12b31b90e6 100644 --- a/arch/h8300/include/asm/flat.h +++ b/arch/h8300/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __H8300_FLAT_H__ #define __H8300_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) 1 #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/m32r/include/asm/flat.h b/arch/m32r/include/asm/flat.h index d851cf0c4aa5..5d711c4688fb 100644 --- a/arch/m32r/include/asm/flat.h +++ b/arch/m32r/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_M32R_FLAT_H #define __ASM_M32R_FLAT_H -#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0)) #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_set_persistent(relval, p) 0 diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h index 814b5174a8e0..a0e290793978 100644 --- a/arch/m68k/include/asm/flat.h +++ b/arch/m68k/include/asm/flat.h @@ -5,7 +5,6 @@ #ifndef __M68KNOMMU_FLAT_H__ #define __M68KNOMMU_FLAT_H__ -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 1 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h index d3b2b4f109e3..5d84df5e27f6 100644 --- a/arch/sh/include/asm/flat.h +++ b/arch/sh/include/asm/flat.h @@ -12,7 +12,6 @@ #ifndef __ASM_SH_FLAT_H #define __ASM_SH_FLAT_H -#define flat_stack_align(sp) /* nothing needed */ #define flat_argvp_envp_on_stack() 0 #define flat_old_ram_flag(flags) (flags) #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index 5cebf0b37798..697f6b5f1313 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -41,6 +41,7 @@ #include #include #include +#include /****************************************************************************/ @@ -54,6 +55,18 @@ #define DBG_FLT(a...) #endif +/* + * User data (stack, data section and bss) needs to be aligned + * for the same reasons as SLAB memory is, and to the same amount. + * Avoid duplicating architecture specific code by using the same + * macro as with SLAB allocation: + */ +#ifdef ARCH_SLAB_MINALIGN +#define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN) +#else +#define FLAT_DATA_ALIGN (sizeof(void *)) +#endif + #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */ #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */ @@ -114,20 +127,18 @@ static unsigned long create_flat_tables( int envc = bprm->envc; char uninitialized_var(dummy); - sp = (unsigned long *) ((-(unsigned long)sizeof(char *))&(unsigned long) p); + sp = (unsigned long *)p; + sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0); + sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN); + argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0); + envp = argv + (argc + 1); - sp -= envc+1; - envp = sp; - sp -= argc+1; - argv = sp; - - flat_stack_align(sp); if (flat_argvp_envp_on_stack()) { - --sp; put_user((unsigned long) envp, sp); - --sp; put_user((unsigned long) argv, sp); + put_user((unsigned long) envp, sp + 2); + put_user((unsigned long) argv, sp + 1); } - put_user(argc,--sp); + put_user(argc, sp); current->mm->arg_start = (unsigned long) p; while (argc-->0) { put_user((unsigned long) p, argv++); @@ -558,7 +569,9 @@ static int load_flat_file(struct linux_binprm * bprm, ret = realdatastart; goto err; } - datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long); + datapos = ALIGN(realdatastart + + MAX_SHARED_LIBS * sizeof(unsigned long), + FLAT_DATA_ALIGN); DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n", (int)(data_len + bss_len + stack_len), (int)datapos); @@ -604,9 +617,12 @@ static int load_flat_file(struct linux_binprm * bprm, } realdatastart = textpos + ntohl(hdr->data_start); - datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long); - reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) + - MAX_SHARED_LIBS * sizeof(unsigned long)); + datapos = ALIGN(realdatastart + + MAX_SHARED_LIBS * sizeof(unsigned long), + FLAT_DATA_ALIGN); + + reloc = (unsigned long *) + (datapos + (ntohl(hdr->reloc_start) - text_len)); memp = textpos; memp_size = len; #ifdef CONFIG_BINFMT_ZFLAT @@ -854,7 +870,7 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs) stack_len = TOP_OF_ARGS - bprm->p; /* the strings */ stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */ stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */ - + stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */ res = load_flat_file(bprm, &libinfo, 0, &stack_len); if (res > (unsigned long)-4096) From b5d598b41aebee67bf95802b68b888e98a449687 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 28 May 2009 14:34:33 -0700 Subject: [PATCH 559/670] parport_gsc: fix printk format error drivers/parport/parport_gsc.c:356: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' [akpm@linux-foundation.org: fix it to handle u64's] Signed-off-by: Alexander Beregalov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/parport_gsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c index e6a7e847ee80..ea31a452b153 100644 --- a/drivers/parport/parport_gsc.c +++ b/drivers/parport/parport_gsc.c @@ -352,8 +352,8 @@ static int __devinit parport_init_chip(struct parisc_device *dev) unsigned long port; if (!dev->irq) { - printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n", - dev->hpa.start); + printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n", + (unsigned long long)dev->hpa.start); return -ENODEV; } From 8e8e8267f0a08c2415d5f51bc9a9fde6d5400619 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Thu, 28 May 2009 14:34:34 -0700 Subject: [PATCH 560/670] serial: 8250_gsc: fix printk format error drivers/serial/8250_gsc.c:44: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' [akpm@linux-foundation.org: fix it to handle u64's] Signed-off-by: Alexander Beregalov Cc: Alan Cox Cc: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_gsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c index 418b4fe9a0a1..33149d982e82 100644 --- a/drivers/serial/8250_gsc.c +++ b/drivers/serial/8250_gsc.c @@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev) */ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) printk(KERN_INFO - "Serial: device 0x%lx not configured.\n" + "Serial: device 0x%llx not configured.\n" "Enable support for Wax, Lasi, Asp or Dino.\n", - dev->hpa.start); + (unsigned long long)dev->hpa.start); return -ENODEV; } From 17663e59704bea838a9236f299104e30909a43b1 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 28 May 2009 14:34:35 -0700 Subject: [PATCH 561/670] S3C-fb: PM fix Correctly restore the FrameBuffer register state in the resume function. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Cc: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/s3c-fb.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index 5e9c6302433b..d3a568e6b169 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -947,7 +947,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev) int win; for (win = 0; win <= S3C_FB_MAX_WIN; win++) - s3c_fb_release_win(sfb, sfb->windows[win]); + if (sfb->windows[win]) + s3c_fb_release_win(sfb, sfb->windows[win]); iounmap(sfb->regs); @@ -985,11 +986,20 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state) static int s3c_fb_resume(struct platform_device *pdev) { struct s3c_fb *sfb = platform_get_drvdata(pdev); + struct s3c_fb_platdata *pd = sfb->pdata; struct s3c_fb_win *win; int win_no; clk_enable(sfb->bus_clk); + /* setup registers */ + writel(pd->vidcon1, sfb->regs + VIDCON1); + + /* zero all windows before we do anything */ + for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) + s3c_fb_clear_win(sfb, win_no); + + /* restore framebuffers */ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) { win = sfb->windows[win_no]; if (!win) From 53b7479bbdaedcc7846c66fd608fe66f1b5aa35b Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Thu, 28 May 2009 14:34:36 -0700 Subject: [PATCH 562/670] atmel_lcdfb: correct fifo size for some products Remove wrong fifo size definition for some AT91 products. Due to a misunderstanding of some AT91 datasheets, a fifo size of 2048 (words) has been introduced by mistake. In fact, all products (AT91/AT32) are sharing the same fifo size of 512 words. Signed-off-by: Nicolas Ferre Cc: Andrew Victor Acked-by: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 9a577a800db5..2fb63f6ea2f1 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -29,14 +29,8 @@ /* configurable parameters */ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 -#define ATMEL_LCDC_DMA_BURST_LEN 8 - -#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \ - defined(CONFIG_ARCH_AT91SAM9RL) -#define ATMEL_LCDC_FIFO_SIZE 2048 -#else -#define ATMEL_LCDC_FIFO_SIZE 512 -#endif +#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */ +#define ATMEL_LCDC_FIFO_SIZE 512 /* words */ #if defined(CONFIG_ARCH_AT91) #define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \ From 32b154c0b0bae2879bf4e549d861caf1759a3546 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 28 May 2009 14:34:37 -0700 Subject: [PATCH 563/670] x86: ignore VM_LOCKED when determining if hugetlb-backed page tables can be shared or not Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302 On x86 and x86-64, it is possible that page tables are shared beween shared mappings backed by hugetlbfs. As part of this, page_table_shareable() checks a pair of vma->vm_flags and they must match if they are to be shared. All VMA flags are taken into account, including VM_LOCKED. The problem is that VM_LOCKED is cleared on fork(). When a process with a shared memory segment forks() to exec() a helper, there will be shared VMAs with different flags. The impact is that the shared segment is sometimes considered shareable and other times not, depending on what process is checking. What happens is that the segment page tables are being shared but the count is inaccurate depending on the ordering of events. As the page tables are freed with put_page(), bad pmd's are found when some of the children exit. The hugepage counters also get corrupted and the Total and Free count will no longer match even when all the hugepage-backed regions are freed. This requires a reboot of the machine to "fix". This patch addresses the problem by comparing all flags except VM_LOCKED when deciding if pagetables should be shared or not for hugetlbfs-backed mapping. Signed-off-by: Mel Gorman Acked-by: Hugh Dickins Cc: Ingo Molnar Cc: Cc: Lee Schermerhorn Cc: KOSAKI Motohiro Cc: Cc: Eric B Munson Cc: Adam Litke Cc: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/hugetlbpage.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 8f307d914c2e..f46c340727b8 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -26,12 +26,16 @@ static unsigned long page_table_shareable(struct vm_area_struct *svma, unsigned long sbase = saddr & PUD_MASK; unsigned long s_end = sbase + PUD_SIZE; + /* Allow segments to share if only one is marked locked */ + unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED; + unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED; + /* * match the virtual addresses, permission and the alignment of the * page table page. */ if (pmd_index(addr) != pmd_index(saddr) || - vma->vm_flags != svma->vm_flags || + vm_flags != svm_flags || sbase < svma->vm_start || svma->vm_end < s_end) return 0; From f83a275dbc5ca1721143698e844243fcadfabf6a Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 28 May 2009 14:34:40 -0700 Subject: [PATCH 564/670] mm: account for MAP_SHARED mappings using VM_MAYSHARE and not VM_SHARED in hugetlbfs Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13302 hugetlbfs reserves huge pages but does not fault them at mmap() time to ensure that future faults succeed. The reservation behaviour differs depending on whether the mapping was mapped MAP_SHARED or MAP_PRIVATE. For MAP_SHARED mappings, hugepages are reserved when mmap() is first called and are tracked based on information associated with the inode. Other processes mapping MAP_SHARED use the same reservation. MAP_PRIVATE track the reservations based on the VMA created as part of the mmap() operation. Each process mapping MAP_PRIVATE must make its own reservation. hugetlbfs currently checks if a VMA is MAP_SHARED with the VM_SHARED flag and not VM_MAYSHARE. For file-backed mappings, such as hugetlbfs, VM_SHARED is set only if the mapping is MAP_SHARED and the file was opened read-write. If a shared memory mapping was mapped shared-read-write for populating of data and mapped shared-read-only by other processes, then hugetlbfs would account for the mapping as if it was MAP_PRIVATE. This causes processes to fail to map the file MAP_SHARED even though it should succeed as the reservation is there. This patch alters mm/hugetlb.c and replaces VM_SHARED with VM_MAYSHARE when the intent of the code was to check whether the VMA was mapped MAP_SHARED or MAP_PRIVATE. Signed-off-by: Mel Gorman Cc: Hugh Dickins Cc: Ingo Molnar Cc: Cc: Lee Schermerhorn Cc: KOSAKI Motohiro Cc: Cc: Eric B Munson Cc: Adam Litke Cc: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index 28c655ba9353..e83ad2c9228c 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -316,7 +316,7 @@ static void resv_map_release(struct kref *ref) static struct resv_map *vma_resv_map(struct vm_area_struct *vma) { VM_BUG_ON(!is_vm_hugetlb_page(vma)); - if (!(vma->vm_flags & VM_SHARED)) + if (!(vma->vm_flags & VM_MAYSHARE)) return (struct resv_map *)(get_vma_private_data(vma) & ~HPAGE_RESV_MASK); return NULL; @@ -325,7 +325,7 @@ static struct resv_map *vma_resv_map(struct vm_area_struct *vma) static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map) { VM_BUG_ON(!is_vm_hugetlb_page(vma)); - VM_BUG_ON(vma->vm_flags & VM_SHARED); + VM_BUG_ON(vma->vm_flags & VM_MAYSHARE); set_vma_private_data(vma, (get_vma_private_data(vma) & HPAGE_RESV_MASK) | (unsigned long)map); @@ -334,7 +334,7 @@ static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map) static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags) { VM_BUG_ON(!is_vm_hugetlb_page(vma)); - VM_BUG_ON(vma->vm_flags & VM_SHARED); + VM_BUG_ON(vma->vm_flags & VM_MAYSHARE); set_vma_private_data(vma, get_vma_private_data(vma) | flags); } @@ -353,7 +353,7 @@ static void decrement_hugepage_resv_vma(struct hstate *h, if (vma->vm_flags & VM_NORESERVE) return; - if (vma->vm_flags & VM_SHARED) { + if (vma->vm_flags & VM_MAYSHARE) { /* Shared mappings always use reserves */ h->resv_huge_pages--; } else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) { @@ -369,14 +369,14 @@ static void decrement_hugepage_resv_vma(struct hstate *h, void reset_vma_resv_huge_pages(struct vm_area_struct *vma) { VM_BUG_ON(!is_vm_hugetlb_page(vma)); - if (!(vma->vm_flags & VM_SHARED)) + if (!(vma->vm_flags & VM_MAYSHARE)) vma->vm_private_data = (void *)0; } /* Returns true if the VMA has associated reserve pages */ static int vma_has_reserves(struct vm_area_struct *vma) { - if (vma->vm_flags & VM_SHARED) + if (vma->vm_flags & VM_MAYSHARE) return 1; if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) return 1; @@ -924,7 +924,7 @@ static long vma_needs_reservation(struct hstate *h, struct address_space *mapping = vma->vm_file->f_mapping; struct inode *inode = mapping->host; - if (vma->vm_flags & VM_SHARED) { + if (vma->vm_flags & VM_MAYSHARE) { pgoff_t idx = vma_hugecache_offset(h, vma, addr); return region_chg(&inode->i_mapping->private_list, idx, idx + 1); @@ -949,7 +949,7 @@ static void vma_commit_reservation(struct hstate *h, struct address_space *mapping = vma->vm_file->f_mapping; struct inode *inode = mapping->host; - if (vma->vm_flags & VM_SHARED) { + if (vma->vm_flags & VM_MAYSHARE) { pgoff_t idx = vma_hugecache_offset(h, vma, addr); region_add(&inode->i_mapping->private_list, idx, idx + 1); @@ -1893,7 +1893,7 @@ retry_avoidcopy: * at the time of fork() could consume its reserves on COW instead * of the full address range. */ - if (!(vma->vm_flags & VM_SHARED) && + if (!(vma->vm_flags & VM_MAYSHARE) && is_vma_resv_set(vma, HPAGE_RESV_OWNER) && old_page != pagecache_page) outside_reserve = 1; @@ -2000,7 +2000,7 @@ retry: clear_huge_page(page, address, huge_page_size(h)); __SetPageUptodate(page); - if (vma->vm_flags & VM_SHARED) { + if (vma->vm_flags & VM_MAYSHARE) { int err; struct inode *inode = mapping->host; @@ -2104,7 +2104,7 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, goto out_mutex; } - if (!(vma->vm_flags & VM_SHARED)) + if (!(vma->vm_flags & VM_MAYSHARE)) pagecache_page = hugetlbfs_pagecache_page(h, vma, address); } @@ -2289,7 +2289,7 @@ int hugetlb_reserve_pages(struct inode *inode, * to reserve the full area even if read-only as mprotect() may be * called to make the mapping read-write. Assume !vma is a shm mapping */ - if (!vma || vma->vm_flags & VM_SHARED) + if (!vma || vma->vm_flags & VM_MAYSHARE) chg = region_chg(&inode->i_mapping->private_list, from, to); else { struct resv_map *resv_map = resv_map_alloc(); @@ -2330,7 +2330,7 @@ int hugetlb_reserve_pages(struct inode *inode, * consumed reservations are stored in the map. Hence, nothing * else has to be done for private mappings here */ - if (!vma || vma->vm_flags & VM_SHARED) + if (!vma || vma->vm_flags & VM_MAYSHARE) region_add(&inode->i_mapping->private_list, from, to); return 0; } From 46f7e602fb32e02145ef14f8c0ca6d399f0a96b9 Mon Sep 17 00:00:00 2001 From: Nikanth Karthikesan Date: Thu, 28 May 2009 14:34:41 -0700 Subject: [PATCH 565/670] memcg: fix build warning and avoid checking for mem != null again and again Fix build warning, "mem_cgroup_is_obsolete defined but not used" when CONFIG_DEBUG_VM is not set. Also avoid checking for !mem again and again. Signed-off-by: Nikanth Karthikesan Acked-by: Pekka Enberg Acked-by: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 4a747a27a22f..78eb8552818b 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -314,14 +314,6 @@ static struct mem_cgroup *try_get_mem_cgroup_from_mm(struct mm_struct *mm) return mem; } -static bool mem_cgroup_is_obsolete(struct mem_cgroup *mem) -{ - if (!mem) - return true; - return css_is_removed(&mem->css); -} - - /* * Call callback function against all cgroup under hierarchy tree. */ @@ -932,7 +924,7 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm, if (unlikely(!mem)) return 0; - VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem)); + VM_BUG_ON(css_is_removed(&mem->css)); while (1) { int ret; From 56ec0c7b88c6eb17733e5015f31302f6312511ed Mon Sep 17 00:00:00 2001 From: Harry Ciao Date: Thu, 28 May 2009 14:34:42 -0700 Subject: [PATCH 566/670] edac: AMD8111 & AMD8131 use dev_name() The "bus_id" member in the device structure has been obsolete, use dev_name() instead. Signed-off-by: Harry Ciao Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/amd8111_edac.c | 4 ++-- drivers/edac/amd8131_edac.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c index 614692181120..2cb58ef743e0 100644 --- a/drivers/edac/amd8111_edac.c +++ b/drivers/edac/amd8111_edac.c @@ -389,7 +389,7 @@ static int amd8111_dev_probe(struct pci_dev *dev, dev_info->edac_dev->dev = &dev_info->dev->dev; dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) dev_info->edac_dev->edac_check = dev_info->check; @@ -473,7 +473,7 @@ static int amd8111_pci_probe(struct pci_dev *dev, pci_info->edac_dev->dev = &pci_info->dev->dev; pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; pci_info->edac_dev->ctl_name = pci_info->ctl_name; - pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id; + pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) pci_info->edac_dev->edac_check = pci_info->check; diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c index c083b31cac5a..b432d60c622a 100644 --- a/drivers/edac/amd8131_edac.c +++ b/drivers/edac/amd8131_edac.c @@ -287,7 +287,7 @@ static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id) dev_info->edac_dev->dev = &dev_info->dev->dev; dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR; dev_info->edac_dev->ctl_name = dev_info->ctl_name; - dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); if (edac_op_state == EDAC_OPSTATE_POLL) dev_info->edac_dev->edac_check = amd8131_chipset.check; From 715fe7af9fd7328af661742bfadc195e665a837f Mon Sep 17 00:00:00 2001 From: Harry Ciao Date: Thu, 28 May 2009 14:34:43 -0700 Subject: [PATCH 567/670] edac: AMD8111 & AMD8131 Kconfig fixup The amd8111_edac.c driver will fail allmodconfig on architectures other than PPC, introduce Kconfig dependency to avoid this, since both AMD8111 and AMD8131 chips are only adopted on Maple so far. Signed-off-by: Harry Ciao Cc: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/Kconfig | 8 ++++++-- drivers/edac/Makefile | 2 ++ 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index e5f5c5a8ba6c..956982f8739b 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -192,16 +192,20 @@ config EDAC_PPC4XX config EDAC_AMD8131 tristate "AMD8131 HyperTransport PCI-X Tunnel" - depends on EDAC_MM_EDAC && PCI + depends on EDAC_MM_EDAC && PCI && PPC_MAPLE help Support for error detection and correction on the AMD8131 HyperTransport PCI-X Tunnel chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. config EDAC_AMD8111 tristate "AMD8111 HyperTransport I/O Hub" - depends on EDAC_MM_EDAC && PCI + depends on EDAC_MM_EDAC && PCI && PPC_MAPLE help Support for error detection and correction on the AMD8111 HyperTransport I/O Hub chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index a5fdcf02f591..59076819135d 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -35,3 +35,5 @@ obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac.o obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o obj-$(CONFIG_EDAC_CELL) += cell_edac.o obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o +obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o +obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o From b8e7e40abeac49644fec4a4f52ffe74c7b05eca0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 28 May 2009 14:01:35 +0100 Subject: [PATCH 568/670] 8250: Fix oops from setserial If you setserial a port which has never been initialised we change the type but don't update the I/O method pointers. The same problem is true if you change the io type of a port - but nobody ever does that so nobody noticed! Remember the old type and when attaching if the type has changed reload the port accessor pointers. We can't do it blindly as some 8250 drivers load custom accessors and we must not stomp those. Tested-by: Victor Seryodkin Closes-bug: #13367 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b4b39811b445..a0127e93ade0 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -137,6 +137,7 @@ struct uart_8250_port { unsigned char mcr; unsigned char mcr_mask; /* mask of user bits */ unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ /* * Some bits in registers are cleared on a read, so they must @@ -471,6 +472,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value) static void set_io_from_upio(struct uart_port *p) { + struct uart_8250_port *up = (struct uart_8250_port *)p; switch (p->iotype) { case UPIO_HUB6: p->serial_in = hub6_serial_in; @@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = io_serial_out; break; } + /* Remember loaded iotype */ + up->cur_iotype = p->iotype; } static void @@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uart_port *port) up->capabilities = uart_config[up->port.type].flags; up->mcr = 0; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (up->port.type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; @@ -2563,6 +2570,9 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (ret < 0) probeflags &= ~PROBE_RSA; + if (up->port.iotype != up->cur_iotype) + set_io_from_upio(port); + if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) @@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev) { int i; + for (i = 0; i < nr_uarts; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + up->cur_iotype = 0xFF; + } + serial8250_isa_init_ports(); for (i = 0; i < nr_uarts; i++) { From 6373fffc5d555caf3acf7c5796cec9820aaf7479 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 29 May 2009 16:12:02 -0700 Subject: [PATCH 569/670] sparc64: Fix section attribute warnings. CSUM copy to/from user assembler was missing allocatable and executable attributes for .fixup Signed-off-by: David S. Miller --- arch/sparc/lib/csum_copy_from_user.S | 2 +- arch/sparc/lib/csum_copy_to_user.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/lib/csum_copy_from_user.S b/arch/sparc/lib/csum_copy_from_user.S index a22eddbe5dba..e0304e6a2242 100644 --- a/arch/sparc/lib/csum_copy_from_user.S +++ b/arch/sparc/lib/csum_copy_from_user.S @@ -5,7 +5,7 @@ #define EX_LD(x) \ 98: x; \ - .section .fixup; \ + .section .fixup, "ax"; \ .align 4; \ 99: retl; \ mov -1, %o0; \ diff --git a/arch/sparc/lib/csum_copy_to_user.S b/arch/sparc/lib/csum_copy_to_user.S index d5b12f441f02..afd01acc587c 100644 --- a/arch/sparc/lib/csum_copy_to_user.S +++ b/arch/sparc/lib/csum_copy_to_user.S @@ -5,7 +5,7 @@ #define EX_ST(x) \ 98: x; \ - .section .fixup; \ + .section .fixup,"ax"; \ .align 4; \ 99: retl; \ mov -1, %o0; \ From 34d531e640cb805973cf656b15c716b961565cea Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 26 May 2009 15:11:06 -0400 Subject: [PATCH 570/670] ACPI: sanity check _PSS frequency to prevent cpufreq crash When BIOS SETUP is changed to disable EIST, some BIOS hand the OS an un-initialized _PSS: Name (_PSS, Package (0x06) { Package (0x06) { 0x80000000, // frequency [MHz] 0x80000000, // power [mW] 0x80000000, // latency [us] 0x80000000, // BM latency [us] 0x80000000, // control 0x80000000 // status }, ... These are outrageous values for frequency, power and latency, raising the question where to draw the line between legal and illegal. We tend to survive garbage in the power and latency fields, but we can BUG_ON when garbage is in the frequency field. Cpufreq multiplies the frequency by 1000 and stores it in a u32 KHz. So disregard a _PSS with a frequency so large that it can't be represented by cpufreq. https://bugzilla.redhat.com/show_bug.cgi?id=500311 Signed-off-by: Len Brown --- drivers/acpi/processor_perflib.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index cafb41000f6b..60e543d3234e 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -309,9 +309,15 @@ static int acpi_processor_get_performance_states(struct acpi_processor *pr) (u32) px->bus_master_latency, (u32) px->control, (u32) px->status)); - if (!px->core_frequency) { - printk(KERN_ERR PREFIX - "Invalid _PSS data: freq is zero\n"); + /* + * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq + */ + if (!px->core_frequency || + ((u32)(px->core_frequency * 1000) != + (px->core_frequency * 1000))) { + printk(KERN_ERR FW_BUG PREFIX + "Invalid BIOS _PSS frequency: 0x%llx MHz\n", + px->core_frequency); result = -EFAULT; kfree(pr->performance->states); goto end; From 34ac272b3aaef11a91e19a72f3ac5772a96ffbc5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 26 May 2009 23:35:34 -0400 Subject: [PATCH 571/670] ACPI: video: DMI workaround broken eMachines E510 BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13376 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 810cca90ca7f..ee45e7604221 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -570,6 +570,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "eMachines E510", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"), + DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"), + }, + }, {} }; From 93bcece20ef87c29548ec7e66532f1018572cea0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 19 May 2009 15:08:41 -0400 Subject: [PATCH 572/670] ACPI: video: DMI workaround broken Acer 5315 BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index ee45e7604221..6d897bbd3bd0 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -578,6 +578,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5315", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), + }, + }, {} }; From 1fc8d33acafe68bdcc21b327d22ef3820b819727 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Wed, 20 May 2009 11:56:08 +0530 Subject: [PATCH 573/670] drm/i915: acpi/video.c fix section mismatch warning Currently acpi_video_exit() is exported as well as using __exit which causes: WARNING: drivers/acpi/video.o(__ksymtab+0x0): Section mismatch in reference from the variable __ksymtab_acpi_video_exit to the function .exit.text:acpi_video_exit() The symbol acpi_video_exit is exported and annotated __exit Fix this by removing the __exit annotation of acpi_video_exit or drop the export. Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Len Brown --- drivers/acpi/video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 810cca90ca7f..a79b88535266 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -2334,7 +2334,7 @@ static int __init acpi_video_init(void) return acpi_video_register(); } -void __exit acpi_video_exit(void) +void acpi_video_exit(void) { acpi_bus_unregister_driver(&acpi_video_bus); From 21671b88be331fb9c95891d5ee7d2e940e6b024c Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Fri, 22 May 2009 10:23:40 +0200 Subject: [PATCH 574/670] ACPI processor: remove spurious newline from warning message Commit 4973b22a ("ACPI processor: reset the throttling state once it's invalid") introduced a new warning which prints a spurious newline. The ACPI_WARNING macro that is used already takes care of adding a newline, after adding ACPI_CA_VERSION to the message. Remove the newline to avoid the message getting split into two lines. Signed-off-by: Frans Pop Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 7f16f5f8e7d3..227543789ba9 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -840,7 +840,7 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) state = acpi_get_throttling_state(pr, value); if (state == -1) { ACPI_WARNING((AE_INFO, - "Invalid throttling state, reset\n")); + "Invalid throttling state, reset")); state = 0; ret = acpi_processor_set_throttling(pr, state); if (ret) From 61c8c67e3ad67ea1d1360f2e88688bd942834756 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 26 May 2009 14:58:39 -0700 Subject: [PATCH 575/670] acpi-cpufreq: fix printk typo and indentation Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 208ecf6643df..54b6de2cd947 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -693,8 +693,8 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { policy->cpuinfo.transition_latency = 20 * 1000; - printk_once(KERN_INFO "Capping off P-state tranision" - " latency at 20 uS\n"); + printk_once(KERN_INFO + "P-state transition latency capped at 20 uS\n"); } /* table init */ From 31db5645bda24682dadbc97d5e8a7918ade2a298 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 29 May 2009 21:11:27 -0400 Subject: [PATCH 576/670] ACPI, i915: build fix (v2) drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' v2: move under DRM_I915 from DRM_I915_KMS Signed-off-by: Len Brown Signed-off-by: Randy Dunlap --- drivers/gpu/drm/Kconfig | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 4cd35d8fd799..f5d46e7199d4 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -67,12 +67,18 @@ config DRM_I830 will load the correct one. config DRM_I915 + tristate "i915 driver" select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB select FRAMEBUFFER_CONSOLE if !EMBEDDED - tristate "i915 driver" + # i915 depends on ACPI_VIDEO when ACPI is enabled + # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI + select ACPI_VIDEO if ACPI help Choose this option if you have a system that has Intel 830M, 845G, 852GM, 855GM 865G or 915G integrated graphics. If M is selected, the @@ -84,12 +90,6 @@ config DRM_I915 config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 - # i915 KMS depends on ACPI_VIDEO when ACPI is enabled - # but for select to work, need to select ACPI_VIDEO's dependencies, ick - select VIDEO_OUTPUT_CONTROL if ACPI - select BACKLIGHT_CLASS_DEVICE if ACPI - select INPUT if ACPI - select ACPI_VIDEO if ACPI help Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old From 465440d2720543669841db5b0691ba41892ed0ae Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 25 May 2009 20:57:21 +0000 Subject: [PATCH 577/670] mlx4_en: Fix a kernel panic when waking tx queue When the transmit queue gets full we enable interrupts for TX completions There was a race that we handled the TX queue both from the interrupt context and from the transmit function. Using "spin_trylock_irq()" ensures this doesn't happen. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_tx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index ac6fc499b280..e5c98a98ad37 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -426,7 +426,7 @@ void mlx4_en_poll_tx_cq(unsigned long data) INC_PERF_COUNTER(priv->pstats.tx_poll); - if (!spin_trylock(&ring->comp_lock)) { + if (!spin_trylock_irq(&ring->comp_lock)) { mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); return; } @@ -439,7 +439,7 @@ void mlx4_en_poll_tx_cq(unsigned long data) if (inflight && priv->port_up) mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); - spin_unlock(&ring->comp_lock); + spin_unlock_irq(&ring->comp_lock); } static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv, @@ -482,9 +482,9 @@ static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) /* Poll the CQ every mlx4_en_TX_MODER_POLL packets */ if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0) - if (spin_trylock(&ring->comp_lock)) { + if (spin_trylock_irq(&ring->comp_lock)) { mlx4_en_process_tx_cq(priv->dev, cq); - spin_unlock(&ring->comp_lock); + spin_unlock_irq(&ring->comp_lock); } } From bdb0e010bf0061a73027cc84dd7ad192c663eca3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 29 May 2009 22:04:54 -0700 Subject: [PATCH 578/670] ath1e: add new device id for asus hardware Gary Lin reports that a new device id needs to be added to the atl1e in order to get some new Asus hardware to work properly. Signed-off-by: Greg Kroah-Hartman Signed-off-by: David S. Miller --- drivers/net/atl1e/atl1e_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c index fb57b750866b..1342418fb209 100644 --- a/drivers/net/atl1e/atl1e_main.c +++ b/drivers/net/atl1e/atl1e_main.c @@ -37,6 +37,7 @@ char atl1e_driver_version[] = DRV_VERSION; */ static struct pci_device_id atl1e_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)}, + {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)}, /* required last entry */ { 0 } }; From cf4ae4e3de83e2c7394af70b46f4f50e5f0fb90c Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Fri, 29 May 2009 22:06:33 -0700 Subject: [PATCH 579/670] net/firmare: Ignore .cis files Signed-off-by: Matt Kraai Signed-off-by: David S. Miller --- firmware/cis/.gitignore | 1 + 1 file changed, 1 insertion(+) create mode 100644 firmware/cis/.gitignore diff --git a/firmware/cis/.gitignore b/firmware/cis/.gitignore new file mode 100644 index 000000000000..1de39847f261 --- /dev/null +++ b/firmware/cis/.gitignore @@ -0,0 +1 @@ +*.cis From 62013ab5d5df297a01ae5863b5c26d758ec0af7f Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sat, 30 May 2009 21:50:58 +0900 Subject: [PATCH 580/670] nilfs2: fix bh leak in nilfs_cpfile_delete_checkpoints function The nilfs_cpfile_delete_checkpoints() wrongly skips brelse() for the header block of checkpoint file in case of errors. This fixes the leak bug. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/cpfile.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c index e90b60dfced9..300f1cdfa862 100644 --- a/fs/nilfs2/cpfile.c +++ b/fs/nilfs2/cpfile.c @@ -311,7 +311,7 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile, ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &cp_bh); if (ret < 0) { if (ret != -ENOENT) - goto out_sem; + goto out_header; /* skip hole */ ret = 0; continue; @@ -344,7 +344,7 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile, continue; printk(KERN_ERR "%s: cannot delete block\n", __func__); - goto out_sem; + goto out_header; } } @@ -361,6 +361,8 @@ int nilfs_cpfile_delete_checkpoints(struct inode *cpfile, nilfs_mdt_mark_dirty(cpfile); kunmap_atomic(kaddr, KM_USER0); } + + out_header: brelse(header_bh); out_sem: From c339dfdd65b52bfd947ab29d1210314a2f6d622d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 30 May 2009 20:06:54 +0200 Subject: [PATCH 581/670] ide_pci_generic: add quirk for Netcell ATA RAID We need to explicitly mark words 85-87 as valid ones since firmware doesn't do it. This should fix support for LBA48 and FLUSH CACHE [EXT] command which stopped working after we applied more strict checking of identify words in: commit 942dcd85bf8edf38cdc3745306ca250684d99a61 ("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()") and commit 4b58f17d7c45a8e5f4acda641bec388398b9c0fa ("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()") Reported-and-tested-by: "Trevor Hemsley" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-pci-generic.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/ide/ide-pci-generic.c b/drivers/ide/ide-pci-generic.c index 61111fd27130..39d4e01f5c9c 100644 --- a/drivers/ide/ide-pci-generic.c +++ b/drivers/ide/ide-pci-generic.c @@ -33,6 +33,16 @@ static int ide_generic_all; /* Set to claim all devices */ module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); +static void netcell_quirkproc(ide_drive_t *drive) +{ + /* mark words 85-87 as valid */ + drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000; +} + +static const struct ide_port_ops netcell_port_ops = { + .quirkproc = netcell_quirkproc, +}; + #define DECLARE_GENERIC_PCI_DEV(extra_flags) \ { \ .name = DRV_NAME, \ @@ -74,6 +84,7 @@ static const struct ide_port_info generic_chipsets[] __devinitdata = { { /* 6: Revolution */ .name = DRV_NAME, + .port_ops = &netcell_port_ops, .host_flags = IDE_HFLAG_CLEAR_SIMPLEX | IDE_HFLAG_TRUST_BIOS_FOR_DMA | IDE_HFLAG_OFF_BOARD, From d315a0e09f1c8b833cacd5e72f3edea419978138 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 31 May 2009 23:09:22 +1000 Subject: [PATCH 582/670] crypto: hash - Fix handling of sg entry that crosses page boundary A quirk that we've always supported is having an sg entry that's bigger than a page, or more generally an sg entry that crosses page boundaries. Even though it would be better to explicitly have to sg entries for this, we need to support it for the existing users, in particular, IPsec. The new ahash sg walking code did try to handle this, but there was a bug where we didn't increment the page so kept on walking on the first page over an dover again. This patch fixes it. Tested-by: Martin Willi Signed-off-by: Herbert Xu --- crypto/ahash.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/crypto/ahash.c b/crypto/ahash.c index b2d1ee32cfe8..f3476374f764 100644 --- a/crypto/ahash.c +++ b/crypto/ahash.c @@ -82,10 +82,11 @@ int crypto_hash_walk_done(struct crypto_hash_walk *walk, int err) if (err) return err; - walk->offset = 0; - - if (nbytes) + if (nbytes) { + walk->offset = 0; + walk->pg++; return hash_walk_next(walk); + } if (!walk->total) return 0; From 52bb25a620e1925bb53d41d0ed28571b3de98a31 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Mon, 1 Jun 2009 06:21:13 +0000 Subject: [PATCH 583/670] headers_check fix: linux/auto_fs.h fix the following 'make headers_check' warnings: usr/include/linux/auto_fs.h:17: include of is preferred over Signed-off-by: Jaswinder Singh Rajput --- include/linux/auto_fs.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h index 63265852b7d1..7b09c8348fd3 100644 --- a/include/linux/auto_fs.h +++ b/include/linux/auto_fs.h @@ -14,13 +14,12 @@ #ifndef _LINUX_AUTO_FS_H #define _LINUX_AUTO_FS_H +#include #ifdef __KERNEL__ #include #include -#include #include #else -#include #include #endif /* __KERNEL__ */ From d280cc989ad591607e812cd5c5dfde702b5f191a Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Mon, 1 Jun 2009 06:23:25 +0000 Subject: [PATCH 584/670] headers_check fix: linux/net_dropmon.h fix the following 'make headers_check' warnings: usr/include/linux/net_dropmon.h:7: found __[us]{8,16,32,64} type without #include Signed-off-by: Jaswinder Singh Rajput --- include/linux/net_dropmon.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h index 0217fb81a630..0e2e100c44a2 100644 --- a/include/linux/net_dropmon.h +++ b/include/linux/net_dropmon.h @@ -1,6 +1,7 @@ #ifndef __NET_DROPMON_H #define __NET_DROPMON_H +#include #include struct net_dm_drop_point { From 4371ee353c3fc41aad9458b8e8e627eb508bc9a3 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 1 Jun 2009 02:43:17 -0700 Subject: [PATCH 585/670] MAINTAINERS: take maintainership of the cpmac Ethernet driver This patch adds me as the maintainer of the CPMAC (AR7) Ethernet driver. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2b349ba4add4..111fc169437a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1532,6 +1532,13 @@ W: http://www.fi.muni.cz/~kas/cosa/ S: Maintained F: drivers/net/wan/cosa* +CPMAC ETHERNET DRIVER +P: Florian Fainelli +M: florian@openwrt.org +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/cpmac.c + CPU FREQUENCY DRIVERS P: Dave Jones M: davej@redhat.com From cf9f6e21c155d5add733b969c695837ead79eeab Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 1 Jun 2009 03:12:04 -0700 Subject: [PATCH 586/670] 3c509: Add missing EISA IDs Several EISA device IDs for 3c509 family network cards are missing from the driver, making the cards unusable in their EISA mode. Here's a fix to add them based on the EISA configuration files distributed by 3Com and our eisa.ids database. Signed-off-by: Maciej W. Rozycki Signed-off-by: David S. Miller --- drivers/net/3c509.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index fbb371921991..682aad897081 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -480,9 +480,13 @@ static int pnp_registered; #ifdef CONFIG_EISA static struct eisa_device_id el3_eisa_ids[] = { + { "TCM5090" }, + { "TCM5091" }, { "TCM5092" }, { "TCM5093" }, + { "TCM5094" }, { "TCM5095" }, + { "TCM5098" }, { "" } }; MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); From 39d8bbedb9571a89d638f5b05358f26ab503d7a6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 1 Jun 2009 13:46:49 +0200 Subject: [PATCH 587/670] hwmon: (lm78) Add missing __devexit_p() The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger Signed-off-by: Jean Delvare --- drivers/hwmon/lm78.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index b5e3b2851698..a1787fdf5b9f 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -182,7 +182,7 @@ static struct platform_driver lm78_isa_driver = { .name = "lm78", }, .probe = lm78_isa_probe, - .remove = lm78_isa_remove, + .remove = __devexit_p(lm78_isa_remove), }; From d54d462472a16fc07adb53a2fcd6c0c2a9a8dd1d Mon Sep 17 00:00:00 2001 From: Christian Engelmayer Date: Mon, 1 Jun 2009 13:46:50 +0200 Subject: [PATCH 588/670] hwmon: Update documentation on fan_max Add fan_max description. Add fan limit alarm 'max_alarm' to the alarm section. Signed-off-by: Christian Engelmayer Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- Documentation/hwmon/sysfs-interface | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2f10ce6a879f..004ee161721e 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -150,6 +150,11 @@ fan[1-*]_min Fan minimum value Unit: revolution/min (RPM) RW +fan[1-*]_max Fan maximum value + Unit: revolution/min (RPM) + Only rarely supported by the hardware. + RW + fan[1-*]_input Fan input value. Unit: revolution/min (RPM) RO @@ -390,6 +395,7 @@ OR in[0-*]_min_alarm in[0-*]_max_alarm fan[1-*]_min_alarm +fan[1-*]_max_alarm temp[1-*]_min_alarm temp[1-*]_max_alarm temp[1-*]_crit_alarm From 60e59f68824102c87e64c5f51c4e57c0b8a61e46 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 24 May 2009 20:34:10 +0000 Subject: [PATCH 589/670] powerpc/pmac: Update PowerMac 32-bit defconfig This mostly adds back AppleTouch support and adds CONFIG_HIGHMEM by default. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/pmac32_defconfig | 278 ++++++++++++++++++-------- 1 file changed, 195 insertions(+), 83 deletions(-) diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index 5339bb44cce9..ea8870a34482 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Tue Nov 11 19:36:51 2008 +# Linux kernel version: 2.6.30-rc7 +# Mon May 25 14:53:25 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y @@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -52,12 +53,14 @@ CONFIG_OF=y CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set CONFIG_HIBERNATE_32=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,14 +75,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -88,23 +101,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -114,10 +131,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -127,10 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -138,11 +157,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -CONFIG_LSF=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,14 +174,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -178,7 +191,9 @@ CONFIG_PPC_PMAC=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -212,11 +227,12 @@ CONFIG_CPU_FREQ_PMAC=y CONFIG_PPC601_SYNC_FIX=y # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -239,6 +255,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -250,12 +267,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -288,6 +310,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m @@ -397,6 +421,8 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -405,6 +431,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -415,6 +442,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -478,17 +506,15 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m +CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +CONFIG_IP_DCCP_TFRC_LIB=y # # DCCP Kernel Hacking @@ -508,13 +534,16 @@ CONFIG_IP_DCCP_TFRC_LIB=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set CONFIG_IRDA=m @@ -577,8 +606,6 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -# CONFIG_BT_HCIUSB_SCO is not set # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIUART is not set CONFIG_BT_HCIBCM203X=m @@ -590,31 +617,27 @@ CONFIG_BT_HCIBFUSB=m # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=m -CONFIG_NL80211=y +# CONFIG_CFG80211_REG_DEBUG is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set CONFIG_MAC80211=m # # Rate control algorithm selection # -CONFIG_MAC80211_RC_PID=y -# CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT_PID=y -# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set -CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" # CONFIG_MAC80211_MESH is not set CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -662,17 +685,27 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set @@ -684,7 +717,6 @@ CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -714,6 +746,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -728,7 +761,6 @@ CONFIG_BLK_DEV_SL82C105=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y -CONFIG_BLK_DEV_IDEDMA_PMAC=y CONFIG_BLK_DEV_IDEDMA=y # @@ -772,6 +804,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -791,8 +824,12 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -822,6 +859,7 @@ CONFIG_SCSI_MAC53C94=y # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -881,6 +919,7 @@ CONFIG_THERM_ADT746X=m # CONFIG_ANSLCD is not set CONFIG_PMAC_RACKMETER=m CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -898,6 +937,8 @@ CONFIG_BMAC=y CONFIG_SUNGEM=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -913,7 +954,6 @@ CONFIG_PCNET32=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -923,6 +963,7 @@ CONFIG_PCNET32=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -935,6 +976,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -945,18 +987,20 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -966,6 +1010,7 @@ CONFIG_NETDEV_10000=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -974,20 +1019,11 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set -CONFIG_HERMES=m -CONFIG_APPLE_AIRPORT=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -CONFIG_PCI_HERMES=m -CONFIG_PCMCIA_HERMES=m -# CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set CONFIG_PRISM54=m @@ -997,15 +1033,17 @@ CONFIG_PRISM54=m # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set CONFIG_P54_COMMON=m # CONFIG_P54_USB is not set # CONFIG_P54_PCI is not set +CONFIG_P54_LEDS=y # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_AR9170_USB is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set CONFIG_B43=m CONFIG_B43_PCI_AUTOSELECT=y @@ -1025,6 +1063,19 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y # CONFIG_B43LEGACY_PIO_MODE is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +CONFIG_HERMES=m +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_APPLE_AIRPORT=m +# CONFIG_PLX_HERMES is not set +# CONFIG_TMD_HERMES is not set +# CONFIG_NORTEL_HERMES is not set +CONFIG_PCI_HERMES=m +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -1036,6 +1087,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -1099,7 +1151,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set +CONFIG_MOUSE_APPLETOUCH=y # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set @@ -1150,10 +1202,13 @@ CONFIG_SERIAL_PMACZILOG_TTYS=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -1232,12 +1287,9 @@ CONFIG_I2C_POWERMAC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1259,11 +1311,11 @@ CONFIG_BATTERY_PMU=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y @@ -1281,18 +1333,13 @@ CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1390,6 +1437,7 @@ CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_KYRO is not set CONFIG_FB_3DFX=y # CONFIG_FB_3DFX_ACCEL is not set +CONFIG_FB_3DFX_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set @@ -1399,12 +1447,14 @@ CONFIG_FB_3DFX=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1444,11 +1494,13 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y CONFIG_SND_DRIVERS=y CONFIG_SND_DUMMY=m # CONFIG_SND_VIRMIDI is not set @@ -1486,6 +1538,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1551,28 +1605,31 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1603,6 +1660,7 @@ CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1625,24 +1683,23 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set -CONFIG_USB_STORAGE_ONETOUCH=y +CONFIG_USB_STORAGE_ONETOUCH=m # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1665,7 +1722,7 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set -# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CP210X is not set # CONFIG_USB_SERIAL_CYPRESS_M8 is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set @@ -1701,15 +1758,19 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1726,7 +1787,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set CONFIG_USB_APPLEDISPLAY=m @@ -1738,6 +1798,11 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1748,7 +1813,9 @@ CONFIG_LEDS_CLASS=y # LED drivers # # CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1759,11 +1826,16 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1774,6 +1846,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set @@ -1783,7 +1856,9 @@ CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1792,6 +1867,7 @@ CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1800,6 +1876,11 @@ CONFIG_INOTIFY_USER=y CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1831,10 +1912,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_HFS_FS=m @@ -1843,6 +1921,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1851,6 +1930,7 @@ CONFIG_HFSPLUS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1868,7 +1948,6 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1940,11 +2019,13 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1954,15 +2035,18 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1973,13 +2057,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1994,6 +2081,7 @@ CONFIG_SCHEDSTATS=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set @@ -2001,6 +2089,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -2009,7 +2098,14 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -2017,12 +2113,19 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_CODE_PATCHING_SELFTEST is not set @@ -2033,6 +2136,7 @@ CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -2051,13 +2155,20 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -2127,6 +2238,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # From 1f23920dbf1377fa9e4aef4f3d20c34a06a71a35 Mon Sep 17 00:00:00 2001 From: Felix Blyakher Date: Thu, 7 May 2009 19:49:45 -0500 Subject: [PATCH 590/670] xfs: fix double unlock in xfs_swap_extents() Regreesion from commit ef8f7fc, which rearranged the code in xfs_swap_extents() leading to double unlock of xfs inode ilock. That resulted in xfs_fsr deadlocking itself on platforms, which don't handle double unlock of rw_semaphore nicely. It caused the count go negative, which represents the write holder, without really having one. ia64 is one of the platforms where deadlock was easily reproduced and the fix was tested. Signed-off-by: Eric Sandeen Reviewed-by: Eric Sandeen Signed-off-by: Felix Blyakher --- fs/xfs/xfs_dfrag.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c index e6d839bddbf0..7465f9ee125f 100644 --- a/fs/xfs/xfs_dfrag.c +++ b/fs/xfs/xfs_dfrag.c @@ -347,13 +347,15 @@ xfs_swap_extents( error = xfs_trans_commit(tp, XFS_TRANS_SWAPEXT); -out_unlock: - xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL); - xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL); out: kmem_free(tempifp); return error; +out_unlock: + xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL); + xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL); + goto out; + out_trans_cancel: xfs_trans_cancel(tp, 0); goto out_unlock; From e6da7c9fed111ba1243297ee6eda8e24ae11c384 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Sat, 23 May 2009 14:30:12 -0500 Subject: [PATCH 591/670] xfs: fix overflow in xfs_growfs_data_private In the case where growing a filesystem would leave the last AG too small, the fixup code has an overflow in the calculation of the new size with one fewer ag, because "nagcount" is a 32 bit number. If the new filesystem has > 2^32 blocks in it this causes a problem resulting in an EINVAL return from growfs: # xfs_io -f -c "truncate 19998630180864" fsfile # mkfs.xfs -f -bsize=4096 -dagsize=76288719b,size=3905982455b fsfile # mount -o loop fsfile /mnt # xfs_growfs /mnt meta-data=/dev/loop0 isize=256 agcount=52, agsize=76288719 blks = sectsz=512 attr=2 data = bsize=4096 blocks=3905982455, imaxpct=5 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 log =internal bsize=4096 blocks=32768, version=2 = sectsz=512 sunit=0 blks, lazy-count=0 realtime =none extsz=4096 blocks=0, rtextents=0 xfs_growfs: XFS_IOC_FSGROWFSDATA xfsctl failed: Invalid argument Reported-by: richard.ems@cape-horn-eng.com Signed-off-by: Eric Sandeen Reviewed-by: Christoph Hellwig Reviewed-by: Felix Blyakher Signed-off-by: Felix Blyakher --- fs/xfs/xfs_fsops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/xfs_fsops.c b/fs/xfs/xfs_fsops.c index 8379e3bca26c..cbd451bb4848 100644 --- a/fs/xfs/xfs_fsops.c +++ b/fs/xfs/xfs_fsops.c @@ -160,7 +160,7 @@ xfs_growfs_data_private( nagcount = new + (nb_mod != 0); if (nb_mod && nb_mod < XFS_MIN_AG_BLOCKS) { nagcount--; - nb = nagcount * mp->m_sb.sb_agblocks; + nb = (xfs_rfsblock_t)nagcount * mp->m_sb.sb_agblocks; if (nb < mp->m_sb.sb_dblocks) return XFS_ERROR(EINVAL); } From 1b17d766463d51904cb242f194a780737e5f73ef Mon Sep 17 00:00:00 2001 From: Felix Blyakher Date: Mon, 1 Jun 2009 13:13:24 -0500 Subject: [PATCH 592/670] xfs: prevent deadlock in xfs_qm_shake() It's possible to recurse into filesystem from the memory allocation, which deadlocks in xfs_qm_shake(). Add check for __GFP_FS, and bail out if it is not set. Signed-off-by: Felix Blyakher Signed-off-by: Hedi Berriche Reviewed-by: Christoph Hellwig Reviewed-by: Andi Kleen Signed-off-by: Felix Blyakher --- fs/xfs/linux-2.6/kmem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/linux-2.6/kmem.h b/fs/xfs/linux-2.6/kmem.h index af6843c7ee4b..179cbd630f69 100644 --- a/fs/xfs/linux-2.6/kmem.h +++ b/fs/xfs/linux-2.6/kmem.h @@ -103,7 +103,7 @@ extern void *kmem_zone_zalloc(kmem_zone_t *, unsigned int __nocast); static inline int kmem_shake_allow(gfp_t gfp_mask) { - return (gfp_mask & __GFP_WAIT) != 0; + return ((gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS)); } #endif /* __XFS_SUPPORT_KMEM_H__ */ From 5a9a8e32ebe269c71d8d3e78f9435fe7729f38e9 Mon Sep 17 00:00:00 2001 From: Ed Swierk Date: Tue, 2 Jun 2009 00:19:52 -0700 Subject: [PATCH 593/670] forcedeth: add phy_power_down parameter, leave phy powered up by default (v2) Add a phy_power_down parameter to forcedeth: set to 1 to power down the phy and disable the link when an interface goes down; set to 0 to always leave the phy powered up. The phy power state persists across reboots; Windows, some BIOSes, and older versions of Linux don't bother to power up the phy again, forcing users to remove all power to get the interface working (see http://bugzilla.kernel.org/show_bug.cgi?id=13072). Leaving the phy powered on is the safest default behavior. Users accustomed to seeing the link state reflect the interface state and/or wanting to minimize power consumption can set phy_power_down=1 if compatibility with other OSes is not an issue. Signed-off-by: Ed Swierk Signed-off-by: David S. Miller --- drivers/net/forcedeth.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index f9a846b1b92f..9f6a68fb7b45 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -897,6 +897,12 @@ enum { }; static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED; +/* + * Power down phy when interface is down (persists through reboot; + * older Linux and other OSes may not power it up again) + */ +static int phy_power_down = 0; + static inline struct fe_priv *get_nvpriv(struct net_device *dev) { return netdev_priv(dev); @@ -1485,7 +1491,10 @@ static int phy_init(struct net_device *dev) /* restart auto negotiation, power down phy */ mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); - mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN); + mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE); + if (phy_power_down) { + mii_control |= BMCR_PDOWN; + } if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) { return PHY_ERROR; } @@ -5513,7 +5522,7 @@ static int nv_close(struct net_device *dev) nv_drain_rxtx(dev); - if (np->wolenabled) { + if (np->wolenabled || !phy_power_down) { writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags); nv_start_rx(dev); } else { @@ -6367,6 +6376,8 @@ module_param(dma_64bit, int, 0); MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0."); module_param(phy_cross, int, 0); MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0."); +module_param(phy_power_down, int, 0); +MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0)."); MODULE_AUTHOR("Manfred Spraul "); MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver"); From ea30e11970a96cfe5e32c03a29332554573b4a10 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 2 Jun 2009 01:29:58 -0700 Subject: [PATCH 594/670] e1000: add missing length check to e1000 receive routine Patch to fix bad length checking in e1000. E1000 by default does two things: 1) Spans rx descriptors for packets that don't fit into 1 skb on recieve 2) Strips the crc from a frame by subtracting 4 bytes from the length prior to doing an skb_put Since the e1000 driver isn't written to support receiving packets that span multiple rx buffers, it checks the End of Packet bit of every frame, and discards it if its not set. This places us in a situation where, if we have a spanning packet, the first part is discarded, but the second part is not (since it is the end of packet, and it passes the EOP bit test). If the second part of the frame is small (4 bytes or less), we subtract 4 from it to remove its crc, underflow the length, and wind up in skb_over_panic, when we try to skb_put a huge number of bytes into the skb. This amounts to a remote DOS attack through careful selection of frame size in relation to interface MTU. The fix for this is already in the e1000e driver, as well as the e1000 sourceforge driver, but no one ever pushed it to e1000. This is lifted straight from e1000e, and prevents small frames from causing the underflow described above Signed-off-by: Neil Horman Tested-by: Andy Gospodarek Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index b1419e21b46b..fffb006b7d95 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4027,8 +4027,9 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, PCI_DMA_FROMDEVICE); length = le16_to_cpu(rx_desc->length); - - if (unlikely(!(status & E1000_RXD_STAT_EOP))) { + /* !EOP means multiple descriptors were used to store a single + * packet, also make sure the frame isn't just CRC only */ + if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" " buffers\n", netdev->name); From 12186be7d2e1106cede1cc728526e3d7998cbe94 Mon Sep 17 00:00:00 2001 From: Minoru Usui Date: Tue, 2 Jun 2009 02:17:34 -0700 Subject: [PATCH 595/670] net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup This patch fixes a bug which unconfigured struct tcf_proto keeps chaining in tc_ctl_tfilter(), and avoids kernel panic in cls_cgroup_classify() when we use cls_cgroup. When we execute 'tc filter add', tcf_proto is allocated, initialized by classifier's init(), and chained. After it's chained, tc_ctl_tfilter() calls classifier's change(). When classifier's change() fails, tc_ctl_tfilter() does not free and keeps tcf_proto. In addition, cls_cgroup is initialized in change() not in init(). It accesses unconfigured struct tcf_proto which is chained before change(), then hits Oops. Signed-off-by: Minoru Usui Signed-off-by: Jarek Poplawski Signed-off-by: Jamal Hadi Salim Tested-by: Minoru Usui Signed-off-by: David S. Miller --- net/sched/cls_api.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 0759f32e9dca..09cdcdfe7e91 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -135,6 +135,7 @@ static int tc_ctl_tfilter(struct sk_buff *skb, struct nlmsghdr *n, void *arg) unsigned long cl; unsigned long fh; int err; + int tp_created = 0; if (net != &init_net) return -EINVAL; @@ -266,10 +267,7 @@ replay: goto errout; } - spin_lock_bh(root_lock); - tp->next = *back; - *back = tp; - spin_unlock_bh(root_lock); + tp_created = 1; } else if (tca[TCA_KIND] && nla_strcmp(tca[TCA_KIND], tp->ops->kind)) goto errout; @@ -296,8 +294,11 @@ replay: switch (n->nlmsg_type) { case RTM_NEWTFILTER: err = -EEXIST; - if (n->nlmsg_flags & NLM_F_EXCL) + if (n->nlmsg_flags & NLM_F_EXCL) { + if (tp_created) + tcf_destroy(tp); goto errout; + } break; case RTM_DELTFILTER: err = tp->ops->delete(tp, fh); @@ -314,8 +315,18 @@ replay: } err = tp->ops->change(tp, cl, t->tcm_handle, tca, &fh); - if (err == 0) + if (err == 0) { + if (tp_created) { + spin_lock_bh(root_lock); + tp->next = *back; + *back = tp; + spin_unlock_bh(root_lock); + } tfilter_notify(skb, n, tp, fh, RTM_NEWTFILTER); + } else { + if (tp_created) + tcf_destroy(tp); + } errout: if (cl) From d3ae33efb8e2f277f9007eb060c9d0b91ab38ae1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 2 Jun 2009 12:34:31 +0100 Subject: [PATCH 596/670] pata_netcell: LBA48 force identify bits correct This matches Bartlomiej's patch for ide_pci_generic: c339dfdd65b52bfd947ab29d1210314a2f6d622d In the libata case netcell has its own mini driver. I suspect this fix is actually only needed for some firmware revs but it does no harm either way. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/ata/pata_netcell.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index bdb236957cb9..9a698097134b 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -20,13 +20,24 @@ /* No PIO or DMA methods needed for this device */ +static unsigned int netcell_read_id(struct ata_device *adev, + struct ata_taskfile *tf, u16 *id) +{ + unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); + /* Firmware forgets to mark words 85-87 valid */ + if (err_mask == 0) + id[ATA_ID_CSF_DEFAULT] |= 0x0400; + return err_mask; +} + static struct scsi_host_template netcell_sht = { ATA_BMDMA_SHT(DRV_NAME), }; static struct ata_port_operations netcell_ops = { .inherits = &ata_bmdma_port_ops, - .cable_detect = ata_cable_80wire, + .cable_detect = ata_cable_80wire, + .read_id = netcell_read_id, }; From 05ad709d04799125ed85dd816fdb558258102172 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 2 Jun 2009 16:58:10 +0100 Subject: [PATCH 597/670] parport: quickfix the proc registration bug Ideally we should have a directory of drivers and a link to the 'active' driver. For now just show the first device which is effectively the existing semantics without a warning. This is an update on the original buggy patch that I then forgot to resubmit. Confusingly it was proposed by Red Hat, written by Etched Pixels fixed and submitted by Intel ... Resolves-Bug: http://bugzilla.kernel.org/show_bug.cgi?id=9749 Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/parport/share.c | 13 ++++++++++--- include/linux/parport.h | 4 ++++ 2 files changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/parport/share.c b/drivers/parport/share.c index 0ebca450ed29..dffa5d4fb298 100644 --- a/drivers/parport/share.c +++ b/drivers/parport/share.c @@ -614,7 +614,10 @@ parport_register_device(struct parport *port, const char *name, * pardevice fields. -arca */ port->ops->init_state(tmp, tmp->state); - parport_device_proc_register(tmp); + if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) { + port->proc_device = tmp; + parport_device_proc_register(tmp); + } return tmp; out_free_all: @@ -646,10 +649,14 @@ void parport_unregister_device(struct pardevice *dev) } #endif - parport_device_proc_unregister(dev); - port = dev->port->physport; + if (port->proc_device == dev) { + port->proc_device = NULL; + clear_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags); + parport_device_proc_unregister(dev); + } + if (port->cad == dev) { printk(KERN_DEBUG "%s: %s forgot to release port\n", port->name, dev->name); diff --git a/include/linux/parport.h b/include/linux/parport.h index e1f83c5065c5..38a423ed3c01 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -324,6 +324,10 @@ struct parport { int spintime; atomic_t ref_count; + unsigned long devflags; +#define PARPORT_DEVPROC_REGISTERED 0 + struct pardevice *proc_device; /* Currently register proc device */ + struct list_head full_list; struct parport *slaves[3]; }; From eb5f4ca9536ba297c98721ecbbdf41ec5b987bd5 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Mon, 1 Jun 2009 09:19:37 +0100 Subject: [PATCH 598/670] [ARM] 5534/1: kmalloc must return a cache line aligned buffer Define ARCH_KMALLOC_MINALIGN in asm/cache.h At the request of Russell also move ARCH_SLAB_MINALIGN to this file. Signed-off-by: Martin Fuzzey Signed-off-by: Russell King --- arch/arm/include/asm/cache.h | 16 ++++++++++++++++ arch/arm/include/asm/page.h | 7 ------- 2 files changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h index cb7a9e97fd7e..feaa75f0013e 100644 --- a/arch/arm/include/asm/cache.h +++ b/arch/arm/include/asm/cache.h @@ -7,4 +7,20 @@ #define L1_CACHE_SHIFT 5 #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) +/* + * Memory returned by kmalloc() may be used for DMA, so we must make + * sure that all such allocations are cache aligned. Otherwise, + * unrelated code may cause parts of the buffer to be read into the + * cache before the transfer is done, causing old data to be seen by + * the CPU. + */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + +/* + * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. + */ +#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) +#define ARCH_SLAB_MINALIGN 8 +#endif + #endif diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index e6eb8a67b807..7b522770f29d 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -202,13 +202,6 @@ typedef struct page *pgtable_t; (((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \ VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) -/* - * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers. - */ -#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) -#define ARCH_SLAB_MINALIGN 8 -#endif - #include #endif From 1946d6ef9d7bd4ba97094fe6eb68a9b877bde6b7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 1 Jun 2009 12:50:33 +0100 Subject: [PATCH 599/670] [ARM] ARMv7 errata: only apply fixes when running on applicable CPU Currently, whenever an erratum workaround is enabled, it will be applied whether or not the erratum is relevent for the CPU. This patch changes this - we check the variant and revision fields in the main ID register to determine which errata to apply. We also avoid re-applying erratum 460075 if it has already been applied. Applying this fix in non-secure mode results in the kernel failing to boot (or even do anything.) This fixes booting on some ARMv7 based platforms which otherwise silently fail. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3397f1e64d76..a08d9d2380d3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -184,23 +184,37 @@ __v7_setup: stmia r12, {r0-r5, r7, r9, r11, lr} bl v7_flush_dcache_all ldmia r12, {r0-r5, r7, r9, r11, lr} + + mrc p15, 0, r0, c0, c0, 0 @ read main ID register + and r10, r0, #0xff000000 @ ARM? + teq r10, #0x41000000 + bne 2f + and r5, r0, #0x00f00000 @ variant + and r6, r0, #0x0000000f @ revision + orr r0, r6, r5, lsr #20-4 @ combine variant and revision + #ifdef CONFIG_ARM_ERRATA_430973 - mrc p15, 0, r10, c1, c0, 1 @ read aux control register - orr r10, r10, #(1 << 6) @ set IBE to 1 - mcr p15, 0, r10, c1, c0, 1 @ write aux control register + teq r5, #0x00100000 @ only present in r1p* + mrceq p15, 0, r10, c1, c0, 1 @ read aux control register + orreq r10, r10, #(1 << 6) @ set IBE to 1 + mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_458693 - mrc p15, 0, r10, c1, c0, 1 @ read aux control register - orr r10, r10, #(1 << 5) @ set L1NEON to 1 - orr r10, r10, #(1 << 9) @ set PLDNOP to 1 - mcr p15, 0, r10, c1, c0, 1 @ write aux control register + teq r0, #0x20 @ only present in r2p0 + mrceq p15, 0, r10, c1, c0, 1 @ read aux control register + orreq r10, r10, #(1 << 5) @ set L1NEON to 1 + orreq r10, r10, #(1 << 9) @ set PLDNOP to 1 + mcreq p15, 0, r10, c1, c0, 1 @ write aux control register #endif #ifdef CONFIG_ARM_ERRATA_460075 - mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register - orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit - mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register + teq r0, #0x20 @ only present in r2p0 + mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register + tsteq r10, #1 << 22 + orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit + mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register #endif - mov r10, #0 + +2: mov r10, #0 #ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #endif From 9fa7eb283c5cdc2b0f4a8cfe6387ed82e5e9a3d3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 2 Jun 2009 20:07:25 -0700 Subject: [PATCH 600/670] Linux 2.6.30-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 739fd34a72a2..610d1c332c45 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* From e76afc4e7816a0a5300073098cdac93a994eb5ca Mon Sep 17 00:00:00 2001 From: Eric Lammerts Date: Tue, 19 May 2009 20:53:20 -0400 Subject: [PATCH 601/670] fix oops when using console=ttymxcN with N > 0 Signed-off-by: Eric Lammerts Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 9f460b175c50..5f0be40dfdab 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1031,6 +1031,8 @@ imx_console_setup(struct console *co, char *options) if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) co->index = 0; sport = imx_ports[co->index]; + if(sport == NULL) + return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); From 6b4bfb87b638a4f114dfb6f72f4ac1be88a4ebe4 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 26 May 2009 22:31:46 +0530 Subject: [PATCH 602/670] mx[23]: don't put clock lookups in __initdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Tested-by: Agustín Ferrín Pozuelo Signed-off-by: Rabin Vincent Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/clock_imx21.c | 2 +- arch/arm/mach-mx2/clock_imx27.c | 2 +- arch/arm/mach-mx3/clock-imx35.c | 2 +- arch/arm/mach-mx3/clock.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c index 999d013e06e3..e4b08ca804ea 100644 --- a/arch/arm/mach-mx2/clock_imx21.c +++ b/arch/arm/mach-mx2/clock_imx21.c @@ -890,7 +890,7 @@ static struct clk clko_clk = { .con_id = n, \ .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { /* It's unlikely that any driver wants one of them directly: _REGISTER_CLOCK(NULL, "ckih", ckih_clk) _REGISTER_CLOCK(NULL, "ckil", ckil_clk) diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 3f7280c490f0..2c971442f3f2 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 53a112d4e04a..3c1e06f56dd6 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "asrc", asrc_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 9957a11533a4..a68fcf981edf 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); .clk = &c, \ }, -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "emi", emi_clk) _REGISTER_CLOCK(NULL, "cspi", cspi1_clk) _REGISTER_CLOCK(NULL, "cspi", cspi2_clk) From c499b0672f8df9379764965c5ec124751699d7c4 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 3 Apr 2009 14:41:56 +0200 Subject: [PATCH 603/670] mxcmmc: decrease minimum frequency to make MMC cards work This is a temporary workaround until the MMC stack can be fixed. Signed-off-by: Sascha Hauer Signed-off-by: Pierre Ossman --- drivers/mmc/host/mxcmmc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index b4a615c55f28..5950102113f4 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -724,7 +724,9 @@ static int mxcmci_probe(struct platform_device *pdev) goto out_clk_put; } - mmc->f_min = clk_get_rate(host->clk) >> 7; + mmc->f_min = clk_get_rate(host->clk) >> 16; + if (mmc->f_min < 400000) + mmc->f_min = 400000; mmc->f_max = clk_get_rate(host->clk) >> 1; /* recommended in data sheet */ From 85b843227a9b8c1a27ebd354a80c89aef067f2ca Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Wed, 15 Apr 2009 17:44:58 +0530 Subject: [PATCH 604/670] omap_hsmmc: Trivial fix for a typo in comment Signed-off-by: Anand Gadiyar Signed-off-by: Pierre Ossman --- drivers/mmc/host/omap_hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index e62a22a7f00c..c40cb96255a2 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -680,7 +680,7 @@ static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) host->dma_ch = -1; /* * DMA Callback: run in interrupt context. - * mutex_unlock will through a kernel warning if used. + * mutex_unlock will throw a kernel warning if used. */ up(&host->sem); } From 18489fa2ba4c170d96ffc1a41f7b9002dcb983b7 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 16 Apr 2009 22:00:36 +0200 Subject: [PATCH 605/670] mxcmmc : Reset the SDHC hardware if software timeout occurs. When a software timeout occurs in polling mode hardware was left in an indeterminate state causing subsequent operations to block. Signed-off-by: Martin Fuzzey --- drivers/mmc/host/mxcmmc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 5950102113f4..dcc9cdb2a4df 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -140,6 +140,8 @@ struct mxcmci_host { struct work_struct datawork; }; +static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios); + static inline int mxcmci_use_dma(struct mxcmci_host *host) { return host->do_dma; @@ -345,8 +347,11 @@ static int mxcmci_poll_status(struct mxcmci_host *host, u32 mask) stat = readl(host->base + MMC_REG_STATUS); if (stat & STATUS_ERR_MASK) return stat; - if (time_after(jiffies, timeout)) + if (time_after(jiffies, timeout)) { + mxcmci_softreset(host); + mxcmci_set_clk_rate(host, host->clock); return STATUS_TIME_OUT_READ; + } if (stat & mask) return 0; cpu_relax(); From 656217d28480f63313a488f6973980f9fbb921a1 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Thu, 16 Apr 2009 22:00:41 +0200 Subject: [PATCH 606/670] mxcmmc: Fix missing return value checking in DMA setup code. Signed-off-by: Martin Fuzzey --- drivers/mmc/host/mxcmmc.c | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index dcc9cdb2a4df..f4cbe473670e 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -162,7 +162,7 @@ static void mxcmci_softreset(struct mxcmci_host *host) writew(0xff, host->base + MMC_REG_RES_TO); } -static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) +static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) { unsigned int nob = data->blocks; unsigned int blksz = data->blksz; @@ -170,6 +170,7 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) #ifdef HAS_DMA struct scatterlist *sg; int i; + int ret; #endif if (data->flags & MMC_DATA_STREAM) nob = 0xffff; @@ -185,7 +186,7 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) for_each_sg(data->sg, sg, data->sg_len, i) { if (sg->offset & 3 || sg->length & 3) { host->do_dma = 0; - return; + return 0; } } @@ -194,23 +195,30 @@ static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data) host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir); - imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_READ); + ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, + datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_READ); } else { host->dma_dir = DMA_TO_DEVICE; host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma_dir); - imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize, - host->res->start + MMC_REG_BUFFER_ACCESS, - DMA_MODE_WRITE); + ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, + datasize, + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_WRITE); } + if (ret) { + dev_err(mmc_dev(host->mmc), "failed to setup DMA : %d\n", ret); + return ret; + } wmb(); imx_dma_enable(host->dma); #endif /* HAS_DMA */ + return 0; } static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd, @@ -536,6 +544,7 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) { struct mxcmci_host *host = mmc_priv(mmc); unsigned int cmdat = host->cmdat; + int error; WARN_ON(host->req != NULL); @@ -545,7 +554,12 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) host->do_dma = 1; #endif if (req->data) { - mxcmci_setup_data(host, req->data); + error = mxcmci_setup_data(host, req->data); + if (error) { + req->cmd->error = error; + goto out; + } + cmdat |= CMD_DAT_CONT_DATA_ENABLE; @@ -553,7 +567,9 @@ static void mxcmci_request(struct mmc_host *mmc, struct mmc_request *req) cmdat |= CMD_DAT_CONT_WRITE; } - if (mxcmci_start_cmd(host, req->cmd, cmdat)) + error = mxcmci_start_cmd(host, req->cmd, cmdat); +out: + if (error) mxcmci_finish_request(host, req); } From 703aaced2b9c9a98285f265f3444c2f89d9d4d19 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 9 May 2009 01:03:52 -0400 Subject: [PATCH 607/670] mvsdio: allow automatic loading when modular Signed-off-by: Nicolas Pitre Tested-by: Martin Michlmayr Signed-off-by: Pierre Ossman --- drivers/mmc/host/mvsdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index c643d0fe118f..1783043a26af 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -882,3 +882,4 @@ module_param(nodma, int, 0); MODULE_AUTHOR("Maen Suleiman, Nicolas Pitre"); MODULE_DESCRIPTION("Marvell MMC,SD,SDIO Host Controller driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mvsdio"); From 992697e9b342115dcf052ffa41d418cb4fe1a841 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 8 May 2009 08:52:49 -0500 Subject: [PATCH 608/670] sdhci-of: Add fsl,esdhc as a valid compatible to bind against We plan to use fsl,esdhc going forward as the base compatible so update the driver to bind against it. Signed-off-by: Kumar Gala Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-of.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c index 3ff4ac3abe8b..09cc597c6316 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of.c @@ -277,6 +277,7 @@ static int __devexit sdhci_of_remove(struct of_device *ofdev) static const struct of_device_id sdhci_of_match[] = { { .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, }, { .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, }, + { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, }, { .compatible = "generic-sdhci", }, {}, }; From e749c6f21fd7dc618f61dd178b4ee739c3cb1c31 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Thu, 16 Apr 2009 15:55:21 +1000 Subject: [PATCH 609/670] mmc/omap: Use disable_irq_nosync() from within irq handlers. disable_irq() should wait for all running handlers to complete before returning. As such, if it's used to disable an interrupt from that interrupt's handler it will deadlock. This replaces the dangerous instances with the _nosync() variant which doesn't have this problem. Signed-off-by: Ben Nizette Acked-by: Tony Lindgren Signed-off-by: Pierre Ossman --- drivers/mmc/host/omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index bfa25c01c872..dceb5ee3bda0 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -822,7 +822,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) del_timer(&host->cmd_abort_timer); host->abort = 1; OMAP_MMC_WRITE(host, IE, 0); - disable_irq(host->irq); + disable_irq_nosync(host->irq); schedule_work(&host->cmd_abort_work); return IRQ_HANDLED; } From 9ca6944cbfad11f2368cf10292e7f3eb036386c2 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Thu, 14 May 2009 21:28:05 -0400 Subject: [PATCH 610/670] mvsdio: ignore high speed timing requests from the core Empirical evidences show that this is causing far more problems than it solves when this mode is enabled in the host hardware. Amongst those cards that are known to be non functional when this bit is set are: A-Data "Speedy" 2GB SD card Kodak 512MB SD card Ativa 1GB MicroSD card Marvell 8688 (WIFI/Bluetooth) SDIO card Since those cards do work on other host controllers which do honnor the hs timing, the issue must be with this particular host hardware. Signed-off-by: Nicolas Pitre Signed-off-by: Pierre Ossman --- drivers/mmc/host/mvsdio.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index 1783043a26af..9d3cfa9909c9 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -620,9 +620,18 @@ static void mvsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->bus_width == MMC_BUS_WIDTH_4) ctrl_reg |= MVSD_HOST_CTRL_DATA_WIDTH_4_BITS; + /* + * The HI_SPEED_EN bit is causing trouble with many (but not all) + * high speed SD, SDHC and SDIO cards. Not enabling that bit + * makes all cards work. So let's just ignore that bit for now + * and revisit this issue if problems for not enabling this bit + * are ever reported. + */ +#if 0 if (ios->timing == MMC_TIMING_MMC_HS || ios->timing == MMC_TIMING_SD_HS) ctrl_reg |= MVSD_HOST_CTRL_HI_SPEED_EN; +#endif host->ctrl = ctrl_reg; mvsd_write(MVSD_HOST_CTRL, ctrl_reg); From a6d297f008e124d0bb4312369191b012c10a1a4e Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 26 May 2009 22:35:34 -0400 Subject: [PATCH 611/670] mvsdio: fix config failure with some high speed SDHC cards Especially with Sandisk SDHC cards, the second SWITCH command was failing with a timeout and the card was not recognized at all. However if the system was busy, or debugging was enabled, or a udelay(100) was inserted before the second SWITCH command in the core code, then the timing was so that the card started to work. With some unusual block sizes, the data FIFO status doesn't indicate a "empty" state right away when the data transfer is done. Queuing another data transfer in that condition results in a transfer timeout. The empty FIFO bit eventually get set by itself in less than 50 usecs when it is not set right away. So let's just poll for that bit before configuring the controller with a new data transfer. Signed-off-by: Nicolas Pitre Signed-off-by: Pierre Ossman --- drivers/mmc/host/mvsdio.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index 9d3cfa9909c9..b56d72ff06e9 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -64,6 +64,31 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data) unsigned int tmout; int tmout_index; + /* + * Hardware weirdness. The FIFO_EMPTY bit of the HW_STATE + * register is sometimes not set before a while when some + * "unusual" data block sizes are used (such as with the SWITCH + * command), even despite the fact that the XFER_DONE interrupt + * was raised. And if another data transfer starts before + * this bit comes to good sense (which eventually happens by + * itself) then the new transfer simply fails with a timeout. + */ + if (!(mvsd_read(MVSD_HW_STATE) & (1 << 13))) { + unsigned long t = jiffies + HZ; + unsigned int hw_state, count = 0; + do { + if (time_after(jiffies, t)) { + dev_warn(host->dev, "FIFO_EMPTY bit missing\n"); + break; + } + hw_state = mvsd_read(MVSD_HW_STATE); + count++; + } while (!(hw_state & (1 << 13))); + dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit " + "(hw=0x%04x, count=%d, jiffies=%ld)\n", + hw_state, count, jiffies - (t - HZ)); + } + /* If timeout=0 then maximum timeout index is used. */ tmout = DIV_ROUND_UP(data->timeout_ns, host->ns_per_clk); tmout += data->timeout_clks; From fbf6a5fcbcc2248f1e676f7a0a7d49cd4b535d2a Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Wed, 6 May 2009 18:40:07 +0800 Subject: [PATCH 612/670] sdhci-of: Fix the wrong accessor to HOSTVER register Freescale eSDHC controller has the special order for the HOST version register. that is not same as the other's registers. The address of HOSTVER in spec is 0xFE, and we need use the in_be16(0xFE) to access it, not in_be16(0xFC). Signed-off-by: Dave Liu Acked-by: Anton Vorontsov Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-of.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c index 09cc597c6316..128c614d11aa 100644 --- a/drivers/mmc/host/sdhci-of.c +++ b/drivers/mmc/host/sdhci-of.c @@ -55,7 +55,13 @@ static u32 esdhc_readl(struct sdhci_host *host, int reg) static u16 esdhc_readw(struct sdhci_host *host, int reg) { - return in_be16(host->ioaddr + (reg ^ 0x2)); + u16 ret; + + if (unlikely(reg == SDHCI_HOST_VERSION)) + ret = in_be16(host->ioaddr + reg); + else + ret = in_be16(host->ioaddr + (reg ^ 0x2)); + return ret; } static u8 esdhc_readb(struct sdhci_host *host, int reg) From b8da7de56ca0ad34726478a50d138a29a9ff76cb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 2 Jun 2009 16:50:35 +1000 Subject: [PATCH 613/670] drm: fix irq naming for kms drivers. allocating devname in the i915 driver was a hack originally and I forgot to figure out how to do this properly back then. So this is the cleaner version that just picks devname or driver name in the irq code. It removes the devname allocs from the i915 driver. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_irq.c | 8 +++++++- drivers/gpu/drm/i915/i915_dma.c | 12 ++---------- 2 files changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 93e677a481f5..fc8e5acd9d9a 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -196,6 +196,7 @@ int drm_irq_install(struct drm_device *dev) { int ret = 0; unsigned long sh_flags = 0; + char *irqname; if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ)) return -EINVAL; @@ -227,8 +228,13 @@ int drm_irq_install(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED)) sh_flags = IRQF_SHARED; + if (dev->devname) + irqname = dev->devname; + else + irqname = dev->driver->name; + ret = request_irq(drm_dev_to_irq(dev), dev->driver->irq_handler, - sh_flags, dev->devname, dev); + sh_flags, irqname, dev); if (ret < 0) { mutex_lock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 53d544552625..0ccb63ee50ee 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -987,12 +987,6 @@ static int i915_load_modeset_init(struct drm_device *dev) int fb_bar = IS_I9XX(dev) ? 2 : 0; int ret = 0; - dev->devname = kstrdup(DRIVER_NAME, GFP_KERNEL); - if (!dev->devname) { - ret = -ENOMEM; - goto out; - } - dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) & 0xff000000; @@ -1006,7 +1000,7 @@ static int i915_load_modeset_init(struct drm_device *dev) ret = i915_probe_agp(dev, &agp_size, &prealloc_size); if (ret) - goto kfree_devname; + goto out; /* Basic memrange allocator for stolen space (aka vram) */ drm_mm_init(&dev_priv->vram, 0, prealloc_size); @@ -1024,7 +1018,7 @@ static int i915_load_modeset_init(struct drm_device *dev) ret = i915_gem_init_ringbuffer(dev); if (ret) - goto kfree_devname; + goto out; /* Allow hardware batchbuffers unless told otherwise. */ @@ -1056,8 +1050,6 @@ static int i915_load_modeset_init(struct drm_device *dev) destroy_ringbuffer: i915_gem_cleanup_ringbuffer(dev); -kfree_devname: - kfree(dev->devname); out: return ret; } From 9863871bd1bbf218b921af5e0bc48ca4f6ea9f12 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 4 Jun 2009 07:08:13 +1000 Subject: [PATCH 614/670] drm/radeon: fix ring free alignment calculations fd.o bz#21849 We were aligning to +16 dwords, instead of to the next 16dword boundary in the ring. Fix the calculation to go to the next 16dword boundary when space checking. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_cp.c | 4 ++-- drivers/gpu/drm/radeon/radeon_drv.h | 5 ++++- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index 77a7a4d84650..aff90bb96488 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -2185,9 +2185,9 @@ void radeon_commit_ring(drm_radeon_private_t *dev_priv) /* check if the ring is padded out to 16-dword alignment */ - tail_aligned = dev_priv->ring.tail & 0xf; + tail_aligned = dev_priv->ring.tail & (RADEON_RING_ALIGN-1); if (tail_aligned) { - int num_p2 = 16 - tail_aligned; + int num_p2 = RADEON_RING_ALIGN - tail_aligned; ring = dev_priv->ring.start; /* pad with some CP_PACKET2 */ diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 8071d965f142..0c6bfc1de153 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -1964,11 +1964,14 @@ do { \ #define RING_LOCALS int write, _nr, _align_nr; unsigned int mask; u32 *ring; +#define RADEON_RING_ALIGN 16 + #define BEGIN_RING( n ) do { \ if ( RADEON_VERBOSE ) { \ DRM_INFO( "BEGIN_RING( %d )\n", (n)); \ } \ - _align_nr = (n + 0xf) & ~0xf; \ + _align_nr = RADEON_RING_ALIGN - ((dev_priv->ring.tail + n) & (RADEON_RING_ALIGN-1)); \ + _align_nr += n; \ if (dev_priv->ring.space <= (_align_nr * sizeof(u32))) { \ COMMIT_RING(); \ radeon_wait_ring( dev_priv, _align_nr * sizeof(u32)); \ From 75185c929ed241f5cf1aa28999b8012181e2c7cb Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:25 -0700 Subject: [PATCH 615/670] drm: add newlines to text sysfs files The contents of various simple text files in sysfs should end with a newline to make them easier to read from the console. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_sysfs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 8f9372921f82..182bdf99cf7a 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -147,7 +147,7 @@ static ssize_t status_show(struct device *device, enum drm_connector_status status; status = connector->funcs->detect(connector); - return snprintf(buf, PAGE_SIZE, "%s", + return snprintf(buf, PAGE_SIZE, "%s\n", drm_get_connector_status_name(status)); } @@ -166,7 +166,7 @@ static ssize_t dpms_show(struct device *device, if (ret) return 0; - return snprintf(buf, PAGE_SIZE, "%s", + return snprintf(buf, PAGE_SIZE, "%s\n", drm_get_dpms_name((int)dpms_status)); } @@ -176,7 +176,7 @@ static ssize_t enabled_show(struct device *device, { struct drm_connector *connector = to_drm_connector(device); - return snprintf(buf, PAGE_SIZE, connector->encoder ? "enabled" : + return snprintf(buf, PAGE_SIZE, "%s\n", connector->encoder ? "enabled" : "disabled"); } From e36ebaf49274ffa78f17b62bcae4c92c33b5b391 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:26 -0700 Subject: [PATCH 616/670] drm: set permissions on edid file to 0444 Without initializing the sysfs attributes for the edid file, it was created with mode 0, making it difficult for applications to use. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_sysfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 182bdf99cf7a..9987ab880835 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -317,6 +317,7 @@ static struct device_attribute connector_attrs_opt1[] = { static struct bin_attribute edid_attr = { .attr.name = "edid", + .attr.mode = 0444, .size = 128, .read = edid_show, }; From c9fb15f60eb517c958dec64dca9357bf62bf2201 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sat, 30 May 2009 20:42:28 -0700 Subject: [PATCH 617/670] drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms. Making the drm_crtc.c code recognize the DPMS property and invoke the connector->dpms function doesn't remove any capability from the driver while reducing code duplication. That just highlighted the problem with the existing DPMS functions which could turn off the connector, but failed to turn off any relevant crtcs. The new drm_helper_connector_dpms function manages all of that, using the drm_helper-specific crtc and encoder dpms functions, automatically computing the appropriate DPMS level for each object in the system. This fixes the current troubles in the i915 driver which left PLLs, pipes and planes running while in DPMS_OFF mode or even while they were unused. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 7 +- drivers/gpu/drm/drm_crtc_helper.c | 109 +++++++++++++++++++++++++++++- drivers/gpu/drm/i915/intel_crt.c | 6 +- drivers/gpu/drm/i915/intel_dvo.c | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 1 + drivers/gpu/drm/i915/intel_lvds.c | 6 +- drivers/gpu/drm/i915/intel_sdvo.c | 1 + drivers/gpu/drm/i915/intel_tv.c | 1 + include/drm/drm_crtc.h | 3 + include/drm/drm_crtc_helper.h | 2 + 10 files changed, 124 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 94a768871734..8fab7890a363 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2294,7 +2294,12 @@ int drm_mode_connector_property_set_ioctl(struct drm_device *dev, } } - if (connector->funcs->set_property) + /* Do DPMS ourselves */ + if (property == connector->dev->mode_config.dpms_property) { + if (connector->funcs->dpms) + (*connector->funcs->dpms)(connector, (int) out_resp->value); + ret = 0; + } else if (connector->funcs->set_property) ret = connector->funcs->set_property(connector, property, out_resp->value); /* store the property value if succesful */ diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 45890447feec..a6f73f1e99d9 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -198,6 +198,29 @@ static void drm_helper_add_std_modes(struct drm_device *dev, } } +/** + * drm_helper_encoder_in_use - check if a given encoder is in use + * @encoder: encoder to check + * + * LOCKING: + * Caller must hold mode config lock. + * + * Walk @encoders's DRM device's mode_config and see if it's in use. + * + * RETURNS: + * True if @encoder is part of the mode_config, false otherwise. + */ +bool drm_helper_encoder_in_use(struct drm_encoder *encoder) +{ + struct drm_connector *connector; + struct drm_device *dev = encoder->dev; + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder == encoder) + return true; + return false; +} +EXPORT_SYMBOL(drm_helper_encoder_in_use); + /** * drm_helper_crtc_in_use - check if a given CRTC is in a mode_config * @crtc: CRTC to check @@ -216,7 +239,7 @@ bool drm_helper_crtc_in_use(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; /* FIXME: Locking around list access? */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) - if (encoder->crtc == crtc) + if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder)) return true; return false; } @@ -240,7 +263,7 @@ void drm_helper_disable_unused_functions(struct drm_device *dev) list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { encoder_funcs = encoder->helper_private; - if (!encoder->crtc) + if (!drm_helper_encoder_in_use(encoder)) (*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF); } @@ -935,6 +958,88 @@ bool drm_helper_initial_config(struct drm_device *dev) } EXPORT_SYMBOL(drm_helper_initial_config); +static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder) +{ + int dpms = DRM_MODE_DPMS_OFF; + struct drm_connector *connector; + struct drm_device *dev = encoder->dev; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder == encoder) + if (connector->dpms < dpms) + dpms = connector->dpms; + return dpms; +} + +static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc) +{ + int dpms = DRM_MODE_DPMS_OFF; + struct drm_connector *connector; + struct drm_device *dev = crtc->dev; + + list_for_each_entry(connector, &dev->mode_config.connector_list, head) + if (connector->encoder && connector->encoder->crtc == crtc) + if (connector->dpms < dpms) + dpms = connector->dpms; + return dpms; +} + +/** + * drm_helper_connector_dpms + * @connector affected connector + * @mode DPMS mode + * + * Calls the low-level connector DPMS function, then + * calls appropriate encoder and crtc DPMS functions as well + */ +void drm_helper_connector_dpms(struct drm_connector *connector, int mode) +{ + struct drm_encoder *encoder = connector->encoder; + struct drm_crtc *crtc = encoder ? encoder->crtc : NULL; + int old_dpms; + + if (mode == connector->dpms) + return; + + old_dpms = connector->dpms; + connector->dpms = mode; + + /* from off to on, do crtc then encoder */ + if (mode < old_dpms) { + if (crtc) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + if (encoder) { + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + if (encoder_funcs->dpms) + (*encoder_funcs->dpms) (encoder, + drm_helper_choose_encoder_dpms(encoder)); + } + } + + /* from on to off, do encoder then crtc */ + if (mode > old_dpms) { + if (encoder) { + struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; + if (encoder_funcs->dpms) + (*encoder_funcs->dpms) (encoder, + drm_helper_choose_encoder_dpms(encoder)); + } + if (crtc) { + struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + if (crtc_funcs->dpms) + (*crtc_funcs->dpms) (crtc, + drm_helper_choose_crtc_dpms(crtc)); + } + } + + return; +} +EXPORT_SYMBOL(drm_helper_connector_dpms); + /** * drm_hotplug_stage_two * @dev DRM device diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 640f5158effc..79acc4f4c1f8 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -381,11 +381,6 @@ static int intel_crt_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { - struct drm_device *dev = connector->dev; - - if (property == dev->mode_config.dpms_property && connector->encoder) - intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf)); - return 0; } @@ -402,6 +397,7 @@ static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = { }; static const struct drm_connector_funcs intel_crt_connector_funcs = { + .dpms = drm_helper_connector_dpms, .detect = intel_crt_detect, .fill_modes = drm_helper_probe_single_connector_modes, .destroy = intel_crt_destroy, diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c index 8b8d6e65cd3f..1ee3007d6ec0 100644 --- a/drivers/gpu/drm/i915/intel_dvo.c +++ b/drivers/gpu/drm/i915/intel_dvo.c @@ -316,6 +316,7 @@ static const struct drm_encoder_helper_funcs intel_dvo_helper_funcs = { }; static const struct drm_connector_funcs intel_dvo_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_dvo_save, .restore = intel_dvo_restore, .detect = intel_dvo_detect, diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index d0983bb93a18..7d6bdd705326 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -219,6 +219,7 @@ static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = { }; static const struct drm_connector_funcs intel_hdmi_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_hdmi_save, .restore = intel_hdmi_restore, .detect = intel_hdmi_detect, diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 53731f0ffcb5..c92a64ac8549 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -343,11 +343,6 @@ static int intel_lvds_set_property(struct drm_connector *connector, struct drm_property *property, uint64_t value) { - struct drm_device *dev = connector->dev; - - if (property == dev->mode_config.dpms_property && connector->encoder) - intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf)); - return 0; } @@ -366,6 +361,7 @@ static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs }; static const struct drm_connector_funcs intel_lvds_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_lvds_save, .restore = intel_lvds_restore, .detect = intel_lvds_detect, diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f3ef6bfd8ffc..3093b4d4a4dd 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1616,6 +1616,7 @@ static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = { }; static const struct drm_connector_funcs intel_sdvo_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_sdvo_save, .restore = intel_sdvo_restore, .detect = intel_sdvo_detect, diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index d2c32983242d..98ac0546b7bd 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1626,6 +1626,7 @@ static const struct drm_encoder_helper_funcs intel_tv_helper_funcs = { }; static const struct drm_connector_funcs intel_tv_connector_funcs = { + .dpms = drm_helper_connector_dpms, .save = intel_tv_save, .restore = intel_tv_restore, .detect = intel_tv_detect, diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 3c1924c010e8..7300fb866767 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -471,6 +471,9 @@ struct drm_connector { u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY]; uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY]; + /* requested DPMS state */ + int dpms; + void *helper_private; uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h index ec073d8288d9..6769ff6c1bc0 100644 --- a/include/drm/drm_crtc_helper.h +++ b/include/drm/drm_crtc_helper.h @@ -99,6 +99,8 @@ extern bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, struct drm_framebuffer *old_fb); extern bool drm_helper_crtc_in_use(struct drm_crtc *crtc); +extern void drm_helper_connector_dpms(struct drm_connector *connector, int mode); + extern int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb, struct drm_mode_fb_cmd *mode_cmd); From 93c05f222413e3a16e8785f252db4726693abd71 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Thu, 4 Jun 2009 09:41:19 +1000 Subject: [PATCH 618/670] drm/i915: intel_lvds.c fix section mismatch intel_no_lvds[] does not require __initdata as it is used only by void intel_lvds_init(struct drm_device *dev). Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/intel_lvds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index c92a64ac8549..53cccfa58b95 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -387,7 +387,7 @@ static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id) } /* These systems claim to have LVDS, but really don't */ -static const struct dmi_system_id __initdata intel_no_lvds[] = { +static const struct dmi_system_id intel_no_lvds[] = { { .callback = intel_no_lvds_dmi_callback, .ident = "Apple Mac Mini (Core series)", From 6c51d1cfa0a370b48a157163340190cf5fd2346b Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 26 May 2009 10:35:52 +1000 Subject: [PATCH 619/670] drm: don't associate _DRM_DRIVER maps with a master A driver will use the _DRM_DRIVER map flag to indicate that it wants to be responsible for removing the map itself, bypassing the DRM's automagic cleanup code. Since the multi-master changes this has been broken, resulting in some drivers having their registers unmapped before it's finished with them. Signed-off-by: Ben Skeggs Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_bufs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 0411d912d82a..80a257554b30 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -371,7 +371,8 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, list->user_token = list->hash.key << PAGE_SHIFT; mutex_unlock(&dev->struct_mutex); - list->master = dev->primary->master; + if (!(map->flags & _DRM_DRIVER)) + list->master = dev->primary->master; *maplist = list; return 0; } From fc43896630a421321a19d7970bac27ac94e9d162 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Thu, 4 Jun 2009 10:20:34 +1000 Subject: [PATCH 620/670] drm: ignore EDID with really tiny modes. Some EDIDs lie and report tiny modes that aren't possible. Ignore these modes. Signed-off-by: Adam Jackson Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index ca9c61656714..6f6b26479d82 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -289,6 +289,11 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, struct drm_display_mode *mode; struct detailed_pixel_timing *pt = &timing->data.pixel_data; + /* ignore tiny modes */ + if (((pt->hactive_hi << 8) | pt->hactive_lo) < 64 || + ((pt->vactive_hi << 8) | pt->hactive_lo) < 64) + return NULL; + if (pt->stereo) { printk(KERN_WARNING "stereo mode not supported\n"); return NULL; From d81e77f041881d8d91c767b8c84f9068290b10c6 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 25 May 2009 16:50:10 +0000 Subject: [PATCH 621/670] [ARM] pxa/imote2: fix UCAM sensor board ADC model number Signed-off-by: Jonathan Cameron Signed-off-by: Eric Miao --- arch/arm/mach-pxa/imote2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index 2121309b2474..2b27336c29f1 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = { */ static struct i2c_board_info __initdata imote2_i2c_board_info[] = { { /* UCAM sensor board */ - .type = "max1238", + .type = "max1239", .addr = 0x35, }, { /* ITS400 Sensor board only */ .type = "max1363", From 1257629b0712a0a68a24c532a05a4cd23e3f7565 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 26 May 2009 22:03:32 +0200 Subject: [PATCH 622/670] [ARM] pxa: fix pxa27x_udc default pullup GPIO Currently, pxa27x_udc tries to use GPIO 0 as D+ pullup if not explicitly configured. Default to an invalid GPIO (-1) instead. Signed-off-by: Philipp Zabel Acked-by: Robert Jarzmik Signed-off-by: Eric Miao --- arch/arm/mach-pxa/devices.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index d245e59c51b1..29970f703f3c 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info) } -static struct pxa2xx_udc_mach_info pxa_udc_info; +static struct pxa2xx_udc_mach_info pxa_udc_info = { + .gpio_pullup = -1, + .gpio_vbus = -1, +}; void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info) { From f79b1b146b52765ee38bfb91bb14eb850fa98017 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 28 May 2009 00:25:05 +0800 Subject: [PATCH 623/670] PCI: use fixed-up device class when configuring device The device class may be changed after the fixup, so re-read the class value from pci_dev when configuring the device. Otherwise some devices such as JMicron SATA controller won't work. Reviewed-by: Matthew Wilcox Reviewed-by: Grant Grundler Tested-by: Marc Dionne Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index e3c3e081b834..f1ae2475ffff 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -745,6 +745,8 @@ int pci_setup_device(struct pci_dev *dev) /* Early fixups, before probing the BARs */ pci_fixup_device(pci_fixup_early, dev); + /* device class may be changed after fixup */ + class = dev->class >> 8; switch (dev->hdr_type) { /* header type */ case PCI_HEADER_TYPE_NORMAL: /* standard header */ From 75e613cdc7bb2ba3795b1bc3ddf19476c767ba68 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 3 Jun 2009 00:13:13 -0700 Subject: [PATCH 624/670] x86/pci: fix mmconfig detection with 32bit near 4g Pascal reported and bisected a commit: | x86/PCI: don't call e820_all_mapped with -1 in the mmconfig case which broke one system system. ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space it didn't have PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 anymore, and try to use 0xf000000 - 0xffffffff for mmconfig For 32bit, mcfg_res->end could be 32bit only (if 64 resources aren't used) So use end - 1 to pass the value in mcfg->end to avoid overflow. We don't need to worry about the e820 path, they are always 64 bit. Reported-by: Pascal Terjan Bisected-by: Pascal Terjan Tested-by: Pascal Terjan Signed-off-by: Yinghai Lu Cc: stable@kernel.org Signed-off-by: Jesse Barnes --- arch/x86/pci/mmconfig-shared.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 5fa10bb9604f..8766b0e216c5 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -375,7 +375,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, if (!fixmem32) return AE_OK; if ((mcfg_res->start >= fixmem32->address) && - (mcfg_res->end <= (fixmem32->address + + (mcfg_res->end < (fixmem32->address + fixmem32->address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; @@ -392,7 +392,7 @@ static acpi_status __init check_mcfg_resource(struct acpi_resource *res, return AE_OK; if ((mcfg_res->start >= address.minimum) && - (mcfg_res->end <= (address.minimum + address.address_length))) { + (mcfg_res->end < (address.minimum + address.address_length))) { mcfg_res->flags = 1; return AE_CTRL_TERMINATE; } @@ -418,7 +418,7 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used) struct resource mcfg_res; mcfg_res.start = start; - mcfg_res.end = end; + mcfg_res.end = end - 1; mcfg_res.flags = 0; acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL); From 0e7ddf7eeeef5aea85412120539ab5369577faeb Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Thu, 4 Jun 2009 11:18:14 +0000 Subject: [PATCH 625/670] drm/i915: Remove a bad BUG_ON in the fence management code. This could be triggered by a gtt mapping fault on 965 that decides to remove the fence from another object that happens to be active currently. Since the other object doesn't rely on the fence reg for its execution, we don't wait for it to finish. We'll soon be not waiting on 915 most of the time as well, so just drop the BUG_ON. Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_gem.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 670d12881468..39f5c658ef5e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2260,9 +2260,6 @@ try_again: goto try_again; } - BUG_ON(old_obj_priv->active || - (reg->obj->write_domain & I915_GEM_GPU_DOMAINS)); - /* * Zap this virtual mapping so we can set up a fence again * for this object next time we need it. From 2cc3c559fb2fe8cecca82a517bc56e88b0c1effd Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Thu, 4 Jun 2009 09:23:50 -0400 Subject: [PATCH 626/670] Btrfs: set device->total_disk_bytes when adding new device It was not being properly initialized, and so the size saved to disk was not correct. Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 5f01dad4b696..a6d35b0054ca 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1440,6 +1440,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) device->io_align = root->sectorsize; device->sector_size = root->sectorsize; device->total_bytes = i_size_read(bdev->bd_inode); + device->disk_total_bytes = device->total_bytes; device->dev_root = root->fs_info->dev_root; device->bdev = bdev; device->in_fs_metadata = 1; From 2cb7878a3a4341d1faa208de962d66f0817d3e7a Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Wed, 3 Jun 2009 14:52:24 +0930 Subject: [PATCH 627/670] lguest: fix 'unhandled trap 13' with CONFIG_CC_STACKPROTECTOR We don't set up the canary; let's disable stack protector on boot.c so we can get into lguest_init, then set it up. As a side effect, switch_to_new_gdt() sets up %fs for us properly too. Signed-off-by: Rusty Russell Acked-by: Tejun Heo Signed-off-by: Linus Torvalds --- arch/x86/lguest/Makefile | 1 + arch/x86/lguest/boot.c | 17 +++++++++++++---- 2 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/x86/lguest/Makefile b/arch/x86/lguest/Makefile index 27f0c9ed7f60..94e0e54056a9 100644 --- a/arch/x86/lguest/Makefile +++ b/arch/x86/lguest/Makefile @@ -1 +1,2 @@ obj-y := i386_head.o boot.o +CFLAGS_boot.o := $(call cc-option, -fno-stack-protector) diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index ca7ec44bafc3..33a93b417396 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -67,6 +67,7 @@ #include #include #include +#include #include /* for struct machine_ops */ /*G:010 Welcome to the Guest! @@ -1088,13 +1089,21 @@ __init void lguest_init(void) * lguest_init() where the rest of the fairly chaotic boot setup * occurs. */ + /* The stack protector is a weird thing where gcc places a canary + * value on the stack and then checks it on return. This file is + * compiled with -fno-stack-protector it, so we got this far without + * problems. The value of the canary is kept at offset 20 from the + * %gs register, so we need to set that up before calling C functions + * in other files. */ + setup_stack_canary_segment(0); + /* We could just call load_stack_canary_segment(), but we might as + * call switch_to_new_gdt() which loads the whole table and sets up + * the per-cpu segment descriptor register %fs as well. */ + switch_to_new_gdt(0); + /* As described in head_32.S, we map the first 128M of memory. */ max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT; - /* Load the %fs segment register (the per-cpu segment register) with - * the normal data segment to get through booting. */ - asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory"); - /* The Host<->Guest Switcher lives at the top of our address space, and * the Host told us how big it is when we made LGUEST_INIT hypercall: * it put the answer in lguest_data.reserve_mem */ From 44fb5511638938a2c37c895abc14df648ffc07e9 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 4 Jun 2009 15:34:51 -0400 Subject: [PATCH 628/670] Btrfs: Fix oops and use after free during space balancing The btrfs allocator uses list_for_each to walk the available block groups when searching for free blocks. It starts off with a hint to help find the best block group for a given allocation. The hint is resolved into a block group, but we don't properly check to make sure the block group we find isn't in the middle of being freed due to filesystem shrinking or balancing. If it is being freed, the list pointers in it are bogus and can't be trusted. But, the code happily goes along and uses them in the list_for_each loop, leading to all kinds of fun. The fix used here is to check to make sure the block group we find really is on the list before we use it. list_del_init is used when removing it from the list, so we can do a proper check. The allocation clustering code has a similar bug where it will trust the block group in the current free space cluster. If our allocation flags have changed (going from single spindle dup to raid1 for example) because the drives in the FS have changed, we're not allowed to use the old block group any more. The fix used here is to check the current cluster against the current allocation flags. Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 51 +++++++++++++++++++++++++++++++++++++++--- 1 file changed, 48 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 3e2c7c738f23..35af93355063 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2622,7 +2622,18 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, search_start); if (block_group && block_group_bits(block_group, data)) { down_read(&space_info->groups_sem); - goto have_block_group; + if (list_empty(&block_group->list) || + block_group->ro) { + /* + * someone is removing this block group, + * we can't jump into the have_block_group + * target because our list pointers are not + * valid + */ + btrfs_put_block_group(block_group); + up_read(&space_info->groups_sem); + } else + goto have_block_group; } else if (block_group) { btrfs_put_block_group(block_group); } @@ -2656,6 +2667,13 @@ have_block_group: * people trying to start a new cluster */ spin_lock(&last_ptr->refill_lock); + if (last_ptr->block_group && + (last_ptr->block_group->ro || + !block_group_bits(last_ptr->block_group, data))) { + offset = 0; + goto refill_cluster; + } + offset = btrfs_alloc_from_cluster(block_group, last_ptr, num_bytes, search_start); if (offset) { @@ -2681,10 +2699,17 @@ have_block_group: last_ptr_loop = 1; search_start = block_group->key.objectid; + /* + * we know this block group is properly + * in the list because + * btrfs_remove_block_group, drops the + * cluster before it removes the block + * group from the list + */ goto have_block_group; } spin_unlock(&last_ptr->lock); - +refill_cluster: /* * this cluster didn't work out, free it and * start over @@ -5968,6 +5993,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, { struct btrfs_path *path; struct btrfs_block_group_cache *block_group; + struct btrfs_free_cluster *cluster; struct btrfs_key key; int ret; @@ -5979,6 +6005,21 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, memcpy(&key, &block_group->key, sizeof(key)); + /* make sure this block group isn't part of an allocation cluster */ + cluster = &root->fs_info->data_alloc_cluster; + spin_lock(&cluster->refill_lock); + btrfs_return_cluster_to_free_space(block_group, cluster); + spin_unlock(&cluster->refill_lock); + + /* + * make sure this block group isn't part of a metadata + * allocation cluster + */ + cluster = &root->fs_info->meta_alloc_cluster; + spin_lock(&cluster->refill_lock); + btrfs_return_cluster_to_free_space(block_group, cluster); + spin_unlock(&cluster->refill_lock); + path = btrfs_alloc_path(); BUG_ON(!path); @@ -5988,7 +6029,11 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, spin_unlock(&root->fs_info->block_group_cache_lock); btrfs_remove_free_space_cache(block_group); down_write(&block_group->space_info->groups_sem); - list_del(&block_group->list); + /* + * we must use list_del_init so people can check to see if they + * are still on the list after taking the semaphore + */ + list_del_init(&block_group->list); up_write(&block_group->space_info->groups_sem); spin_lock(&block_group->space_info->lock); From 730c586ad5228c339949b2eb4e72b80ae167abc4 Mon Sep 17 00:00:00 2001 From: Salman Qazi Date: Thu, 4 Jun 2009 15:20:39 -0700 Subject: [PATCH 629/670] drivers/char/mem.c: avoid OOM lockup during large reads from /dev/zero While running 20 parallel instances of dd as follows: #!/bin/bash for i in `seq 1 20`; do dd if=/dev/zero of=/export/hda3/dd_$i bs=1073741824 count=1 & done wait on a 16G machine, we noticed that rather than just killing the processes, the entire kernel went down. Stracing dd reveals that it first does an mmap2, which makes 1GB worth of zero page mappings. Then it performs a read on those pages from /dev/zero, and finally it performs a write. The machine died during the reads. Looking at the code, it was noticed that /dev/zero's read operation had been changed by 557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") from giving zero page mappings to actually zeroing the page. The zeroing of the pages causes physical pages to be allocated to the process. But, when the process exhausts all the memory that it can, the kernel cannot kill it, as it is still in the kernel mode allocating more memory. Consequently, the kernel eventually crashes. To fix this, I propose that when a fatal signal is pending during /dev/zero read operation, we simply return and let the user process die. Signed-off-by: Salman Qazi Cc: Nick Piggin Signed-off-by: Andrew Morton [ Modified error return and comment trivially. - Linus] Signed-off-by: Linus Torvalds --- drivers/char/mem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 8f05c38c2f06..65e12bca657c 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -694,6 +694,9 @@ static ssize_t read_zero(struct file * file, char __user * buf, written += chunk - unwritten; if (unwritten) break; + /* Consider changing this to just 'signal_pending()' with lots of testing */ + if (fatal_signal_pending(current)) + return written ? written : -EINTR; buf += chunk; count -= chunk; cond_resched(); From 087eb437051b3de817720f9c80c440fc9e7dcce8 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 4 Jun 2009 16:29:07 -0700 Subject: [PATCH 630/670] ptrace: tracehook_report_clone: fix false positives The "trace || CLONE_PTRACE" check in tracehook_report_clone() is not right, - If the untraced task does clone(CLONE_PTRACE) the new child is not traced, we must not queue SIGSTOP. - If we forked the traced task, but the tracer exits and untraces both the forking task and the new child (after copy_process() drops tasklist_lock), we should not queue SIGSTOP too. Change the code to check task_ptrace() != 0 instead. This is still racy, but the race is harmless. We can race with another tracer attaching to this child, or the tracer can exit and detach in parallel. But giwen that we didn't do wake_up_new_task() yet, the child must have the pending SIGSTOP anyway. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Cc: Christoph Hellwig Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/tracehook.h | 11 +++++------ kernel/fork.c | 2 +- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h index c7aa154f4bfc..eb96603d92db 100644 --- a/include/linux/tracehook.h +++ b/include/linux/tracehook.h @@ -259,14 +259,12 @@ static inline void tracehook_finish_clone(struct task_struct *child, /** * tracehook_report_clone - in parent, new child is about to start running - * @trace: return value from tracehook_prepare_clone() * @regs: parent's user register state * @clone_flags: flags from parent's system call * @pid: new child's PID in the parent's namespace * @child: new child task * - * Called after a child is set up, but before it has been started - * running. @trace is the value returned by tracehook_prepare_clone(). + * Called after a child is set up, but before it has been started running. * This is not a good place to block, because the child has not started * yet. Suspend the child here if desired, and then block in * tracehook_report_clone_complete(). This must prevent the child from @@ -276,13 +274,14 @@ static inline void tracehook_finish_clone(struct task_struct *child, * * Called with no locks held, but the child cannot run until this returns. */ -static inline void tracehook_report_clone(int trace, struct pt_regs *regs, +static inline void tracehook_report_clone(struct pt_regs *regs, unsigned long clone_flags, pid_t pid, struct task_struct *child) { - if (unlikely(trace) || unlikely(clone_flags & CLONE_PTRACE)) { + if (unlikely(task_ptrace(child))) { /* - * The child starts up with an immediate SIGSTOP. + * It doesn't matter who attached/attaching to this + * task, the pending SIGSTOP is right in any case. */ sigaddset(&child->pending.signal, SIGSTOP); set_tsk_thread_flag(child, TIF_SIGPENDING); diff --git a/kernel/fork.c b/kernel/fork.c index b9e2edd00726..875ffbdd96d0 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1409,7 +1409,7 @@ long do_fork(unsigned long clone_flags, } audit_finish_fork(p); - tracehook_report_clone(trace, regs, clone_flags, nr, p); + tracehook_report_clone(regs, clone_flags, nr, p); /* * We set PF_STARTING at creation in case tracing wants to From 08f67461c609ad96bf26732b590569e02e322019 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 4 Jun 2009 16:29:08 -0700 Subject: [PATCH 631/670] kbuild: fix detection of CONFIG_FRAME_WARN=0 The checking of CONFIG_FRAME_WARN in the top level Makefile forgot to actually derefence the variable thus leading to an always true check. Signed-off-by: Mike Frysinger Cc: Andi Kleen Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 610d1c332c45..106515492089 100644 --- a/Makefile +++ b/Makefile @@ -533,7 +533,7 @@ endif include $(srctree)/arch/$(SRCARCH)/Makefile -ifneq (CONFIG_FRAME_WARN,0) +ifneq ($(CONFIG_FRAME_WARN),0) KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) endif From edaba2c5334492f82d39ec35637c6dea5176a977 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 4 Jun 2009 16:29:09 -0700 Subject: [PATCH 632/670] ptrace: revert "ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic" Commit 95a3540da9c81a5987be810e1d9a83640a366bd5 ("ptrace_detach: the wrong wakeup breaks the ERESTARTxxx logic") removed the "extra" wake_up_process() from ptrace_detach(), but as Jan pointed out this breaks the compatibility. I believe the changelog is right and this wake_up() is wrong in many ways, but GDB assumes that ptrace(PTRACE_DETACH, child, 0, 0) always wakes up the tracee. Despite the fact this breaks SIGNAL_STOP_STOPPED/group_stop_count logic, and despite the fact this wake_up_process() can break another assumption: PTRACE_DETACH with SIGSTOP should leave the tracee in TASK_STOPPED case. Because the untraced child can dequeue SIGSTOP and call do_signal_stop() before ptrace_detach() calls wake_up_process(). Revert this change for now. We need some fixes even if we we want to keep the current behaviour, but these fixes are not for 2.6.30. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Cc: Jan Kratochvil Cc: Denys Vlasenko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/ptrace.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 0692ab5a0d67..42c317874cfa 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -304,6 +304,8 @@ int ptrace_detach(struct task_struct *child, unsigned int data) if (child->ptrace) { child->exit_code = data; dead = __ptrace_detach(current, child); + if (!child->exit_state) + wake_up_process(child); } write_unlock_irq(&tasklist_lock); From e9e10124e269a39de089c5e0d9936fae2ff889b2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 5 Jun 2009 11:56:18 +0100 Subject: [PATCH 633/670] ivtv: Fix PCI DMA direction The ivtv stream buffers may be for receive or for send but the attached sg handle is always destined cpu->device. We flush it correctly but the allocation is wrongly done with the same type as the buffers. See bug: http://bugzilla.kernel.org/show_bug.cgi?id=13385 (Note this doesn't close the bug - it fixes the ivtv part and in turn the logging next shows up some rather alarming DMA sg list warnings in libata) Signed-off-by: Alan Cox Acked-by: Hans Verkuil Signed-off-by: Linus Torvalds --- drivers/media/video/ivtv/ivtv-queue.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c index ff7b7deded4f..7fde36e6d227 100644 --- a/drivers/media/video/ivtv/ivtv-queue.c +++ b/drivers/media/video/ivtv/ivtv-queue.c @@ -230,7 +230,8 @@ int ivtv_stream_alloc(struct ivtv_stream *s) return -ENOMEM; } if (ivtv_might_use_dma(s)) { - s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, sizeof(struct ivtv_sg_element), s->dma); + s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, + sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE); ivtv_stream_sync_for_cpu(s); } From 27704a16c9e0fb4c6b04344c7c4c40ac16148ec0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 5 Jun 2009 10:21:52 -0700 Subject: [PATCH 634/670] Revert "drm: don't associate _DRM_DRIVER maps with a master" This reverts commit 6c51d1cfa0a370b48a157163340190cf5fd2346b, which apparently causes DRI initialization failures on Radeons. Reported-by: Markus Trippelsdorf Requested-by: Dave Airlie Signed-off-by: Linus Torvalds --- drivers/gpu/drm/drm_bufs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 80a257554b30..0411d912d82a 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -371,8 +371,7 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, list->user_token = list->hash.key << PAGE_SHIFT; mutex_unlock(&dev->struct_mutex); - if (!(map->flags & _DRM_DRIVER)) - list->master = dev->primary->master; + list->master = dev->primary->master; *maplist = list; return 0; } From 2c701b10283b58937201004276319ef9d9051b5d Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Fri, 5 Jun 2009 12:37:07 -0400 Subject: [PATCH 635/670] [CPUFREQ] powernow-k8: check space_id of _PCT registers to be FFH The powernow-k8 driver checks to see that the Performance Control/Status Registers are declared as FFH (functional fixed hardware) by the BIOS. However, this check got broken in the commit: 0e64a0c982c06a6b8f5e2a7f29eb108fdf257b2f [CPUFREQ] checkpatch cleanups for powernow-k8 Fix based on an original patch from Naga Chumbalkar. Signed-off-by: Naga Chumbalkar Cc: Mark Langsdorf Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index f6b32d112357..35dc8fbe92bd 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -835,7 +835,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { struct cpufreq_frequency_table *powernow_table; int ret_val = -ENODEV; - acpi_integer space_id; + acpi_integer control, status; if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) { dprintk("register performance failed: bad ACPI data\n"); @@ -848,12 +848,13 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) goto err_out; } - space_id = data->acpi_data.control_register.space_id; - if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) || - (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) { + control = data->acpi_data.control_register.space_id; + status = data->acpi_data.status_register.space_id; + + if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) || + (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) { dprintk("Invalid control/status registers (%x - %x)\n", - data->acpi_data.control_register.space_id, - space_id); + control, status); goto err_out; } From 45bc955bb1324a46c9539550cc615994e6d0a43d Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 5 Jun 2009 10:41:39 -0400 Subject: [PATCH 636/670] pata_legacy: wait for async probing The basic problem here that pata_legacy attaches the host, sees if it found any devices and detaches it if none were found. With async probing, it's not waiting until discovery is finished before deciding it has no devices and trying the detach leading to this warning: ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 ------------[ cut here ]------------ WARNING: at drivers/ata/libata-core.c:6222 ata_host_detach+0x75/0x90() Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.30-rc7 #1 Call Trace: [] ? ata_host_detach+0x75/0x90 [] ? ata_host_detach+0x75/0x90 [] ? warn_slowpath_common+0x45/0x80 [] ? warn_slowpath_null+0xa/0x10 [] ? ata_host_detach+0x75/0x90 [] ? legacy_init+0x44e/0x87f [] ? legacy_init+0x0/0x87f [] ? _stext+0x21/0x140 [] ? proc_register+0x2f/0x190 [] ? create_proc_entry+0x5c/0xc0 [] ? register_irq_proc+0x6e/0x90 [] ? kernel_init+0x6e/0xbf [] ? kernel_init+0x0/0xbf [] ? kernel_thread_helper+0x7/0x10 ---[ end trace ef1ee36e873ae3a0 ]--- Because it detaches before the probe is complete. One way to fix it would be to put an async_synchronize_full() before looking for devices, which this patch does. A better way might be to separate libata into its own domain and only wait for that. Reported-by: Mikael Pettersson Signed-off-by: James Bottomley Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index f72c6c5b820f..6932e56d179c 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -48,6 +48,7 @@ * */ +#include #include #include #include @@ -1028,6 +1029,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) &legacy_sht); if (ret) goto fail; + async_synchronize_full(); ld->platform_dev = pdev; /* Nothing found means we drop the port as its probably not there */ From 5f33b3bcd7aac66a51e6bfaf35e8cff4eabafb06 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 1 Jun 2009 22:42:10 +0300 Subject: [PATCH 637/670] pata_efar: fix PIO2 underclocking Fix the PIO mode 2 using mode 0 timings -- this driver should enable the fast timing bank starting with PIO2, just like the PIIX/ICH drivers do. Also, fix/rephrase some comments while at it. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_efar.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index 2085e0a3a05a..2a6412f5d117 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c @@ -22,7 +22,7 @@ #include #define DRV_NAME "pata_efar" -#define DRV_VERSION "0.4.4" +#define DRV_VERSION "0.4.5" /** * efar_pre_reset - Enable bits @@ -98,18 +98,17 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) { 2, 1 }, { 2, 3 }, }; - if (pio > 2) - control |= 1; /* TIME1 enable */ + if (pio > 1) + control |= 1; /* TIME */ if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ - control |= 2; /* IE enable */ - /* Intel specifies that the PPE functionality is for disk only */ + control |= 2; /* IE */ + /* Intel specifies that the prefetch/posting is for disk only */ if (adev->class == ATA_DEV_ATA) - control |= 4; /* PPE enable */ + control |= 4; /* PPE */ pci_read_config_word(dev, idetm_port, &idetm_data); - /* Enable PPE, IE and TIME as appropriate */ - + /* Set PPE, IE, and TIME as appropriate */ if (adev->devno == 0) { idetm_data &= 0xCCF0; idetm_data |= control; @@ -129,7 +128,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(dev, 0x44, slave_data); } - idetm_data |= 0x4000; /* Ensure SITRE is enabled */ + idetm_data |= 0x4000; /* Ensure SITRE is set */ pci_write_config_word(dev, idetm_port, idetm_data); } From 9b10ae86d1616f46dabb67c663fe6a9c3a502663 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 30 May 2009 20:50:12 +0900 Subject: [PATCH 638/670] ahci: add warning messages for hp laptops with broken suspend Harddisks on HP dv[4-6] and HDX18 fail to come online after resume on earlier BIOSen. Fortunately, HP recently released BIOS updates for all machines to fix the issue. Detect old BIOSen, warn the user to update BIOS on boot and suspend attempts and fail suspend. Kudos to all the bug reporters. Signed-off-by: Tejun Heo Cc: kernel.org@epperson.homelinux.net Cc: emisca@gmail.com Cc: Gadi Cohen Cc: Paul Swanson Cc: s@ourada.org Cc: Trevor Davenport Cc: corruptor1972 Cc: Victoria Wilson Cc: khiraly Cc: Sean Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 08186ecbaf8d..6b91c26a4635 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -220,6 +220,7 @@ enum { AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ + AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ /* ap->flags bits */ @@ -2316,9 +2317,17 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) { struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; u32 ctl; + if (mesg.event & PM_EVENT_SUSPEND && + hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_printk(KERN_ERR, &pdev->dev, + "BIOS update required for suspend/resume\n"); + return -EIO; + } + if (mesg.event & PM_EVENT_SLEEP) { /* AHCI spec rev1.1 section 8.3.3: * Software must disable interrupts prior to requesting a @@ -2610,6 +2619,63 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev) return false; } +static bool ahci_broken_suspend(struct pci_dev *pdev) +{ + static const struct dmi_system_id sysids[] = { + /* + * On HP dv[4-6] and HDX18 with earlier BIOSen, link + * to the harddisk doesn't become online after + * resuming from STR. Warn and fail suspend. + */ + { + .ident = "dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv4 Notebook PC"), + }, + .driver_data = "F.30", /* cutoff BIOS version */ + }, + { + .ident = "dv5", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv5 Notebook PC"), + }, + .driver_data = "F.16", /* cutoff BIOS version */ + }, + { + .ident = "dv6", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP Pavilion dv6 Notebook PC"), + }, + .driver_data = "F.21", /* cutoff BIOS version */ + }, + { + .ident = "HDX18", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, + "HP HDX18 Notebook PC"), + }, + .driver_data = "F.23", /* cutoff BIOS version */ + }, + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(sysids); + const char *ver; + + if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2)) + return false; + + ver = dmi_get_system_info(DMI_BIOS_VERSION); + + return !ver || strcmp(ver, dmi->driver_data) < 0; +} + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2715,6 +2781,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) "quirky BIOS, skipping spindown on poweroff\n"); } + if (ahci_broken_suspend(pdev)) { + hpriv->flags |= AHCI_HFLAG_NO_SUSPEND; + dev_printk(KERN_WARNING, &pdev->dev, + "BIOS update required for suspend/resume\n"); + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at From 65e31643115349fd7a81acbe75ec4a54d5df8aad Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Tue, 19 May 2009 01:37:44 +0300 Subject: [PATCH 639/670] ata_piix: Add HP Compaq nc6000 to the broken poweroff list HP Compaq nc6000 suffers from the double disk spindown issue. Add it to the broken poweroff DMI list. Signed-off-by: Ville Syrjala Signed-off-by: Jeff Garzik --- drivers/ata/ata_piix.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index d51a17c0f59b..1aeb7082b0c4 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1455,6 +1455,15 @@ static bool piix_broken_system_poweroff(struct pci_dev *pdev) /* PCI slot number of the controller */ .driver_data = (void *)0x1FUL, }, + { + .ident = "HP Compaq nc6000", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, { } /* terminate list */ }; From cd24f8c1e7e27a2c6051a9a338d4704a2431dbf0 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 5 Jun 2009 18:48:08 +0100 Subject: [PATCH 640/670] mtd: davinci nand: update clock naming DaVinci clock support has been updated in mainline. Update clock names accordingly. Signed-off-by: Kevin Hilman Acked-by: David Brownell Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/nand/davinci_nand.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 0119220de7d0..02700f769b8a 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -407,16 +407,17 @@ static int __init nand_davinci_probe(struct platform_device *pdev) } info->chip.ecc.mode = ecc_mode; - info->clk = clk_get(&pdev->dev, "AEMIFCLK"); + info->clk = clk_get(&pdev->dev, "aemif"); if (IS_ERR(info->clk)) { ret = PTR_ERR(info->clk); - dev_dbg(&pdev->dev, "unable to get AEMIFCLK, err %d\n", ret); + dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret); goto err_clk; } ret = clk_enable(info->clk); if (ret < 0) { - dev_dbg(&pdev->dev, "unable to enable AEMIFCLK, err %d\n", ret); + dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", + ret); goto err_clk_enable; } From a3cb900cc408977a11519bc7c760f3e499079589 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 13 May 2009 15:02:27 +0100 Subject: [PATCH 641/670] [libata] pata_ali: Use IGN_SIMPLEX Some ALi devices report simplex if they have been disabled and re-enabled, and restoring the byte does not work. Ignore it - the needed supporting logic is already present for the SATA ULi ports. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_ali.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 751b7ea4816c..fc9c5d6d7d80 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -497,14 +497,16 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0x20 added DMA */ static const struct ata_port_info info_20 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .port_ops = &ali_20_port_ops }; /* Revision 0x20 with support logic added UDMA */ static const struct ata_port_info info_20_udma = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA2, @@ -512,7 +514,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC2 adds UDMA66 */ static const struct ata_port_info info_c2 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, @@ -520,7 +523,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC3 is UDMA66 for now */ static const struct ata_port_info info_c3 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA4, @@ -528,7 +532,8 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC4 is UDMA100 */ static const struct ata_port_info info_c4 = { - .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | + ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA5, @@ -536,7 +541,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ static const struct ata_port_info info_c5 = { - .flags = ATA_FLAG_SLAVE_POSS, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, From 460bcf57b128ce1c0dd553d905fedc097f9955c6 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 12 May 2009 07:37:56 -0400 Subject: [PATCH 642/670] Fix nobh_truncate_page() to not pass stack garbage to get_block() The nobh_truncate_page() function is used by ext2, exofs, and jfs. Of these three, only ext2 and jfs's get_block() function pays attention to bh->b_size --- which is normally always the filesystem blocksize except when the get_block() function is called by either mpage_readpage(), mpage_readpages(), or the direct I/O routines in fs/direct_io.c. Unfortunately, nobh_truncate_page() does not initialize map_bh before calling the filesystem-supplied get_block() function. So ext2 and jfs will try to calculate the number of blocks to map by taking stack garbage and shifting it left by inode->i_blkbits. This should be *mostly* harmless (except the filesystem will do some unnneeded work) unless the stack garbage is less than filesystem's blocksize, in which case maxblocks will be zero, and the attempt to find out whether or not the filesystem has a hole at a given logical block will fail, and the page cache entry might not get zero'ed out. Also if the stack garbage in in map_bh->state happens to have the BH_Mapped bit set, there could be an attempt to call readpage() on a non-existent page, which could cause nobh_truncate_page() to return an error when it should not. Fix this by initializing map_bh->state and map_bh->size. Fortunately, it's probably fairly unlikely that ext2 and jfs users mount with nobh these days. Signed-off-by: "Theodore Ts'o" Cc: Dave Kleikamp Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Al Viro --- fs/buffer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/buffer.c b/fs/buffer.c index aed297739eb0..49106127a4aa 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2736,6 +2736,8 @@ has_buffers: pos += blocksize; } + map_bh.b_size = blocksize; + map_bh.b_state = 0; err = get_block(inode, iblock, &map_bh, 0); if (err) goto unlock; From 72a43d63cb51057393edfbcfc4596066205ad15d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 13 May 2009 19:13:40 +0100 Subject: [PATCH 643/670] ext3/4 with synchronous writes gets wedged by Postfix OK, that's probably the easiest way to do that, as much as I don't like it... Since iget() et.al. will not accept I_FREEING (will wait to go away and restart), and since we'd better have serialization between new/free on fs data structures anyway, we can afford simply skipping I_FREEING et.al. in insert_inode_locked(). We do that from new_inode, so it won't race with free_inode in any interesting ways and it won't race with iget (of any origin; nfsd or in case of fs corruption a lookup) since both still will wait for I_LOCK. Reviewed-by: "Theodore Ts'o" Acked-by: Jan Kara Tested-by: David Watson Signed-off-by: Al Viro --- fs/inode.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/fs/inode.c b/fs/inode.c index 0571983755dc..a4876e561953 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1053,13 +1053,22 @@ int insert_inode_locked(struct inode *inode) struct super_block *sb = inode->i_sb; ino_t ino = inode->i_ino; struct hlist_head *head = inode_hashtable + hash(sb, ino); - struct inode *old; inode->i_state |= I_LOCK|I_NEW; while (1) { + struct hlist_node *node; + struct inode *old = NULL; spin_lock(&inode_lock); - old = find_inode_fast(sb, head, ino); - if (likely(!old)) { + hlist_for_each_entry(old, node, head, i_hash) { + if (old->i_ino != ino) + continue; + if (old->i_sb != sb) + continue; + if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) + continue; + break; + } + if (likely(!node)) { hlist_add_head(&inode->i_hash, head); spin_unlock(&inode_lock); return 0; @@ -1081,14 +1090,24 @@ int insert_inode_locked4(struct inode *inode, unsigned long hashval, { struct super_block *sb = inode->i_sb; struct hlist_head *head = inode_hashtable + hash(sb, hashval); - struct inode *old; inode->i_state |= I_LOCK|I_NEW; while (1) { + struct hlist_node *node; + struct inode *old = NULL; + spin_lock(&inode_lock); - old = find_inode(sb, head, test, data); - if (likely(!old)) { + hlist_for_each_entry(old, node, head, i_hash) { + if (old->i_sb != sb) + continue; + if (!test(old, data)) + continue; + if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)) + continue; + break; + } + if (likely(!node)) { hlist_add_head(&inode->i_hash, head); spin_unlock(&inode_lock); return 0; From f07502dae230a2c3b65381fd1b06e8a18b2c7525 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 6 Jun 2009 21:18:09 +0100 Subject: [PATCH 644/670] integrity: fix IMA inode leak CONFIG_IMA=y inode activity leaks iint_cache and radix_tree_node objects until the system runs out of memory. Nowhere is calling ima_inode_free() a.k.a. ima_iint_delete(). Fix that by calling it from destroy_inode(). Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- fs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/inode.c b/fs/inode.c index a4876e561953..bca0c618fdb3 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -219,6 +219,7 @@ static struct inode *alloc_inode(struct super_block *sb) void destroy_inode(struct inode *inode) { BUG_ON(inode_has_buffers(inode)); + ima_inode_free(inode); security_inode_free(inode); if (inode->i_sb->s_op->destroy_inode) inode->i_sb->s_op->destroy_inode(inode); From 521a415c9f6d4e5463807ce6d36598acabcd204f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 7 Jun 2009 13:52:50 +0200 Subject: [PATCH 645/670] pdc202xx_old: fix 'pdc20246_dma_ops' Commit ac95beedf8bc97b24f9540d4da9952f07221c023 (ide: add struct ide_port_ops (take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq() methods to call the driver's resetproc() method regardless of whether it was defined for this specific controller while it hadn't been defined and hence called for PDC20246. So the dma_clear() method, the successor of dma_timeout(), shouldn't exist and the dma_lost_irq() method should be standard for PDC20246. Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pdc202xx_old.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 248a54bd2386..8df26302a0b5 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -328,9 +328,8 @@ static const struct ide_dma_ops pdc20246_dma_ops = { .dma_start = ide_dma_start, .dma_end = ide_dma_end, .dma_test_irq = pdc202xx_dma_test_irq, - .dma_lost_irq = pdc202xx_dma_lost_irq, + .dma_lost_irq = ide_dma_lost_irq, .dma_timer_expiry = ide_dma_sff_timer_expiry, - .dma_clear = pdc202xx_reset, .dma_sff_read_status = ide_dma_sff_read_status, }; From 669165daad2ec839df85b8c5f7bc155e76a2f404 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 7 Jun 2009 13:52:50 +0200 Subject: [PATCH 646/670] pdc202xx_old: fix resetproc() method pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while that function actually twiddles the single, shared software reset bit -- the net effect is a duplicated reset and horrendous 4 second delay happening not only on a channel reset but also when dma_lost_irq() and dma_clear() methods are called. Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(), and move it before the actual reset... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pdc202xx_old.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 8df26302a0b5..b3bc96f930a6 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c @@ -1,6 +1,6 @@ /* * Copyright (C) 1998-2002 Andre Hedrick - * Copyright (C) 2006-2007 MontaVista Software, Inc. + * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. * Copyright (C) 2007 Bartlomiej Zolnierkiewicz * * Portions Copyright (C) 1999 Promise Technology, Inc. @@ -227,28 +227,19 @@ somebody_else: return (dma_stat & 4) == 4; /* return 1 if INTR asserted */ } -static void pdc202xx_reset_host (ide_hwif_t *hwif) +static void pdc202xx_reset(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; unsigned long high_16 = hwif->extra_base - 16; u8 udma_speed_flag = inb(high_16 | 0x001f); + printk(KERN_WARNING "PDC202xx: software reset...\n"); + outb(udma_speed_flag | 0x10, high_16 | 0x001f); mdelay(100); outb(udma_speed_flag & ~0x10, high_16 | 0x001f); mdelay(2000); /* 2 seconds ?! */ - printk(KERN_WARNING "PDC202XX: %s channel reset.\n", - hwif->channel ? "Secondary" : "Primary"); -} - -static void pdc202xx_reset (ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_hwif_t *mate = hwif->mate; - - pdc202xx_reset_host(hwif); - pdc202xx_reset_host(mate); - ide_set_max_pio(drive); } From aa853f85d9ed593672d0f24a98c72a2518cb63e6 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Sat, 6 Jun 2009 10:17:57 +0100 Subject: [PATCH 647/670] [ARM] 5543/1: arm: serial amba: add missing declaration in serial.h This header is sometimes included in the uncompress stage to get register values, but no can be included there. So declare "struct amba_device" here before using it in a prototype. Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: Russell King --- include/linux/amba/serial.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 48ee32a18ac5..64a982ea5d5f 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -159,6 +159,7 @@ #define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS) #ifndef __ASSEMBLY__ +struct amba_device; /* in uncompress this is included but amba/bus.h is not */ struct amba_pl010_data { void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl); }; From a4c0364be3f43d3e17fe19270f8b3d64881606e6 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sat, 6 Jun 2009 12:34:39 +0300 Subject: [PATCH 648/670] KVM: Explicity initialize cpus_hardware_enabled Under CONFIG_MAXSMP, cpus_hardware_enabled is allocated from the heap and not statically initialized. This causes a crash on reboot when kvm thinks vmx is enabled on random nonexistent cpus and accesses nonexistent percpu lists. Fix by explicitly clearing the variable. Cc: stable@kernel.org Reported-and-tested-by: Yinghai Lu Signed-off-by: Avi Kivity --- virt/kvm/kvm_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 1ecbe2391c8b..4293528200b3 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -2305,6 +2305,7 @@ int kvm_init(void *opaque, unsigned int vcpu_size, r = -ENOMEM; goto out_free_0; } + cpumask_clear(cpus_hardware_enabled); r = kvm_arch_hardware_setup(); if (r < 0) From e36b80b658d471be5a8a40f00e2c7614524b86a2 Mon Sep 17 00:00:00 2001 From: Matthieu Castet Date: Fri, 22 May 2009 22:25:04 +0200 Subject: [PATCH 649/670] SSB: BCM47xx: Export ssb_watchdog_timer_set this patch export ssb_watchdog_timer_set to allow to use it in a Linux watchdog driver. Signed-off-by: Matthieu CASTET Acked-by : Michael Buesch Signed-off-by: Ralf Baechle --- drivers/ssb/embedded.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c index 7dc3a6b41397..a0e0d246b592 100644 --- a/drivers/ssb/embedded.c +++ b/drivers/ssb/embedded.c @@ -29,6 +29,7 @@ int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks) } return -ENODEV; } +EXPORT_SYMBOL(ssb_watchdog_timer_set); u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask) { From e082f188f774544bc2c2edf51176157503c98fe4 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 2 Jun 2009 19:05:28 +0100 Subject: [PATCH 650/670] MIPS: Sibyte: Honor CONFIG_CMDLINE Original patch by Imre Kaloz . Signed-off-by: Ralf Baechle --- arch/mips/sibyte/cfe/setup.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c index 3de30f79db3f..eb5396cf81bb 100644 --- a/arch/mips/sibyte/cfe/setup.c +++ b/arch/mips/sibyte/cfe/setup.c @@ -288,13 +288,7 @@ void __init prom_init(void) */ cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) { - if (argc < 0) { - /* - * It's OK for direct boot to not provide a - * command line - */ - strcpy(arcs_cmdline, "root=/dev/ram0 "); - } else { + if (argc >= 0) { /* The loader should have set the command line */ /* too early for panic to do any good */ printk("LINUX_CMDLINE not defined in cfe."); From c9d89d97f0d174b9154820dd5c6726d1c794cd99 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 2 Jun 2009 23:15:10 +0900 Subject: [PATCH 651/670] MIPS: Kconfig: Remove "Support for" from Cavium system type Signed-off-by: Yoichi Yuasa Acked-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 09b1287a92ce..28119e641f19 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -593,7 +593,7 @@ config WR_PPMC board, which is based on GT64120 bridge chip. config CAVIUM_OCTEON_SIMULATOR - bool "Support for the Cavium Networks Octeon Simulator" + bool "Cavium Networks Octeon Simulator" select CEVT_R4K select 64BIT_PHYS_ADDR select DMA_COHERENT @@ -607,7 +607,7 @@ config CAVIUM_OCTEON_SIMULATOR hardware. config CAVIUM_OCTEON_REFERENCE_BOARD - bool "Support for the Cavium Networks Octeon reference board" + bool "Cavium Networks Octeon reference board" select CEVT_R4K select 64BIT_PHYS_ADDR select DMA_COHERENT From e25bfc9243f2eab12a2ce92b7f4b8a2e3e6949a6 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Tue, 2 Jun 2009 23:17:07 +0900 Subject: [PATCH 652/670] MIPS: Cobalt: PCI bus is always required to obtain the board ID Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 28119e641f19..25f3b0a11ca8 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -72,6 +72,7 @@ config MIPS_COBALT select IRQ_CPU select IRQ_GT641XX select PCI_GT64XXX_PCI0 + select PCI select SYS_HAS_CPU_NEVADA select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL From 3a553147eaad5d4de90ab1f695aa13ddbea684ec Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Thu, 4 Jun 2009 18:05:49 +0530 Subject: [PATCH 653/670] MIPS: ioctl.h: Fix headers_check warnings Make ioctl.h compatible with asm-generic/ioctl.h and userspace fix the following 'make headers_check' warning: usr/include/asm-mips/ioctl.h:64: extern's make no sense in userspace Signed-off-by: Jaswinder Singh Rajput Signed-off-by: Ralf Baechle --- arch/mips/include/asm/ioctl.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mips/include/asm/ioctl.h b/arch/mips/include/asm/ioctl.h index 85067e248a83..916163401b2c 100644 --- a/arch/mips/include/asm/ioctl.h +++ b/arch/mips/include/asm/ioctl.h @@ -60,12 +60,16 @@ ((nr) << _IOC_NRSHIFT) | \ ((size) << _IOC_SIZESHIFT)) +#ifdef __KERNEL__ /* provoke compile error for invalid uses of size argument */ extern unsigned int __invalid_size_argument_for_IOC; #define _IOC_TYPECHECK(t) \ ((sizeof(t) == sizeof(t[1]) && \ sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ sizeof(t) : __invalid_size_argument_for_IOC) +#else +#define _IOC_TYPECHECK(t) (sizeof(t)) +#endif /* used to create numbers */ #define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0) From 5636919b5c909fee54a6ef5226475ecae012ad02 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 28 Feb 2009 09:44:28 +0000 Subject: [PATCH 654/670] MIPS: Outline udelay and fix a few issues. Outlining fixes the issue were on certain CPUs such as the R10000 family the delay loop would need an extra cycle if it overlaps a cacheline boundary. The rewrite also fixes build errors with GCC 4.4 which was changed in way incompatible with the kernel's inline assembly. Relying on pure C for computation of the delay value removes the need for explicit. The price we pay is a slight slowdown of the computation - to be fixed on another day. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/cpu-info.h | 4 +- arch/mips/include/asm/delay.h | 92 ++------------------------------ arch/mips/kernel/proc.c | 2 +- arch/mips/lib/Makefile | 4 +- arch/mips/lib/delay.c | 56 +++++++++++++++++++ 5 files changed, 66 insertions(+), 92 deletions(-) create mode 100644 arch/mips/lib/delay.c diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index 744cd8fb107f..126044308dec 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -39,8 +39,8 @@ struct cache_desc { #define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */ struct cpuinfo_mips { - unsigned long udelay_val; - unsigned long asid_cache; + unsigned int udelay_val; + unsigned int asid_cache; /* * Capability and feature descriptor structure for MIPS CPU diff --git a/arch/mips/include/asm/delay.h b/arch/mips/include/asm/delay.h index b0bccd2c4ed5..a07e51b2be13 100644 --- a/arch/mips/include/asm/delay.h +++ b/arch/mips/include/asm/delay.h @@ -11,94 +11,12 @@ #ifndef _ASM_DELAY_H #define _ASM_DELAY_H -#include -#include +extern void __delay(unsigned int loops); +extern void __ndelay(unsigned int ns); +extern void __udelay(unsigned int us); -#include -#include - -static inline void __delay(unsigned long loops) -{ - if (sizeof(long) == 4) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " subu %0, 1 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops)); - else if (sizeof(long) == 8 && !DADDI_WAR) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " dsubu %0, 1 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops)); - else if (sizeof(long) == 8 && DADDI_WAR) - __asm__ __volatile__ ( - " .set noreorder \n" - " .align 3 \n" - "1: bnez %0, 1b \n" - " dsubu %0, %2 \n" - " .set reorder \n" - : "=r" (loops) - : "0" (loops), "r" (1)); -} - - -/* - * Division by multiplication: you don't have to worry about - * loss of precision. - * - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ - -static inline void __udelay(unsigned long usecs, unsigned long lpj) -{ - unsigned long hi, lo; - - /* - * The rates of 128 is rounded wrongly by the catchall case - * for 64-bit. Excessive precission? Probably ... - */ -#if defined(CONFIG_64BIT) && (HZ == 128) - usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */ -#elif defined(CONFIG_64BIT) - usecs *= (0x8000000000000000UL / (500000 / HZ)); -#else /* 32-bit junk follows here */ - usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) + - 0x80000000ULL) >> 32); -#endif - - if (sizeof(long) == 4) - __asm__("multu\t%2, %3" - : "=h" (usecs), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - else if (sizeof(long) == 8 && !R4000_WAR) - __asm__("dmultu\t%2, %3" - : "=h" (usecs), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - else if (sizeof(long) == 8 && R4000_WAR) - __asm__("dmultu\t%3, %4\n\tmfhi\t%0" - : "=r" (usecs), "=h" (hi), "=l" (lo) - : "r" (usecs), "r" (lpj) - : GCC_REG_ACCUM); - - __delay(usecs); -} - -#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val - -#define udelay(usecs) __udelay((usecs), __udelay_val) +#define ndelay(ns) __udelay(ns) +#define udelay(us) __udelay(us) /* make sure "usecs *= ..." in udelay do not overflow. */ #if HZ >= 1000 diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 26760cad8b69..e0a4ac18fa07 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -42,7 +42,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, fmt, __cpu_name[n], (version >> 4) & 0x0f, version & 0x0f, (fp_vers >> 4) & 0x0f, fp_vers & 0x0f); - seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n", + seq_printf(m, "BogoMIPS\t\t: %u.%02u\n", cpu_data[n].udelay_val / (500000/HZ), (cpu_data[n].udelay_val / (5000/HZ)) % 100); seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no"); diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index c13c7ad2cdae..2adead5a8a37 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -2,8 +2,8 @@ # Makefile for MIPS-specific library files.. # -lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \ - strncpy_user.o strnlen_user.o uncached.o +lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \ + strlen_user.o strncpy_user.o strnlen_user.o uncached.o obj-y += iomap.o obj-$(CONFIG_PCI) += iomap-pci.o diff --git a/arch/mips/lib/delay.c b/arch/mips/lib/delay.c new file mode 100644 index 000000000000..f69c6b569eb3 --- /dev/null +++ b/arch/mips/lib/delay.c @@ -0,0 +1,56 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 by Waldorf Electronics + * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Copyright (C) 2007 Maciej W. Rozycki + */ +#include +#include +#include + +#include +#include + +inline void __delay(unsigned int loops) +{ + __asm__ __volatile__ ( + " .set noreorder \n" + " .align 3 \n" + "1: bnez %0, 1b \n" + " subu %0, 1 \n" + " .set reorder \n" + : "=r" (loops) + : "0" (loops)); +} +EXPORT_SYMBOL(__delay); + +/* + * Division by multiplication: you don't have to worry about + * loss of precision. + * + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +void __udelay(unsigned long us) +{ + unsigned int lpj = current_cpu_data.udelay_val; + + __delay((us * 0x000010c7 * HZ * lpj) >> 32); +} +EXPORT_SYMBOL(__udelay); + +void __ndelay(unsigned long ns) +{ + unsigned int lpj = current_cpu_data.udelay_val; + + __delay((us * 0x00000005 * HZ * lpj) >> 32); +} +EXPORT_SYMBOL(__ndelay); From 5284c6b99ea017f73c09b50f34a637ff9d5d26a0 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 8 Jun 2009 12:31:00 +0100 Subject: [PATCH 655/670] pata_netcell: Fix typo The previous patch submission had a I typo I didn't catch but Bartlomiej noted. Guess this proves the point about any patch being risky late in an rc Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/ata/pata_netcell.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index 9a698097134b..f0d52f72f5bb 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c @@ -26,7 +26,7 @@ static unsigned int netcell_read_id(struct ata_device *adev, unsigned int err_mask = ata_do_dev_read_id(adev, tf, id); /* Firmware forgets to mark words 85-87 valid */ if (err_mask == 0) - id[ATA_ID_CSF_DEFAULT] |= 0x0400; + id[ATA_ID_CSF_DEFAULT] |= 0x4000; return err_mask; } From 3af968e066d593bc4dacc021715f3e95ddf0996f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 8 Jun 2009 12:31:53 -0700 Subject: [PATCH 656/670] async: Fix lack of boot-time console due to insufficient synchronization Our async work synchronization was broken by "async: make sure independent async domains can't accidentally entangle" (commit d5a877e8dd409d8c702986d06485c374b705d340), because it would report the wrong lowest active async ID when there was both running and pending async work. This caused things like no being able to read the root filesystem, resulting in missing console devices and inability to run 'init', causing a boot-time panic. This fixes it by properly returning the lowest pending async ID: if there is any running async work, that will have a lower ID than any pending work, and we should _not_ look at the pending work list. There were alternative patches from Jaswinder and James, but this one also cleans up the code by removing the pointless 'ret' variable and the unnecesary testing for an empty list around 'for_each_entry()' (if the list is empty, the for_each_entry() thing just won't execute). Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13474 Reported-and-tested-by: Chris Clayton Cc: Jaswinder Singh Rajput Cc: James Bottomley Cc: Arjan van de Ven Signed-off-by: Linus Torvalds --- kernel/async.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/kernel/async.c b/kernel/async.c index 50540301ed0f..27235f5de198 100644 --- a/kernel/async.c +++ b/kernel/async.c @@ -92,23 +92,18 @@ extern int initcall_debug; static async_cookie_t __lowest_in_progress(struct list_head *running) { struct async_entry *entry; - async_cookie_t ret = next_cookie; /* begin with "infinity" value */ if (!list_empty(running)) { entry = list_first_entry(running, struct async_entry, list); - ret = entry->cookie; + return entry->cookie; } - if (!list_empty(&async_pending)) { - list_for_each_entry(entry, &async_pending, list) - if (entry->running == running) { - ret = entry->cookie; - break; - } - } + list_for_each_entry(entry, &async_pending, list) + if (entry->running == running) + return entry->cookie; - return ret; + return next_cookie; /* "infinity" value */ } static async_cookie_t lowest_in_progress(struct list_head *running) From f001a70cdc61c01452d42e8b32fd7c7842ef62d5 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 9 Jun 2009 14:30:31 +1000 Subject: [PATCH 657/670] md/raid5: use conf->raid_disks in preference to mddev->raid_disk mddev->raid_disks can be changed and any time by a request from user-space. It is a suggestion as to what number of raid_disks is desired. conf->raid_disks can only be changed by the raid5 module with suitable locks in place. It is a statement as to the current number of raid_disks. There are two places where the latter should be used, but the former is used. This can lead to a crash when reshaping an array. This patch changes to mddev-> to conf-> Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 5d400aef8d9b..75469e63ff10 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3288,7 +3288,7 @@ static void unplug_slaves(mddev_t *mddev) int i; rcu_read_lock(); - for (i=0; iraid_disks; i++) { + for (i = 0; i < conf->raid_disks; i++) { mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev); if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) { struct request_queue *r_queue = bdev_get_queue(rdev->bdev); @@ -4034,7 +4034,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski * We don't need to check the 'failed' flag as when that gets set, * recovery aborts. */ - for (i=0; iraid_disks; i++) + for (i = 0; i < conf->raid_disks; i++) if (conf->disks[i].rdev == NULL) still_degraded = 1; From a8c906ca3f63d05f0d25490cf82276f73c6fe095 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 9 Jun 2009 14:39:59 +1000 Subject: [PATCH 658/670] md/raid5 - avoid deadlocks in get_active_stripe during reshape md has functionality to 'quiesce' and array so that all pending IO completed and no new IO starts. This is used to achieve a stable state before making internal changes. Currently this quiescing applies equally to normal IO, resync IO, and reshape IO. However there is a problem with applying it to reshape IO. Reshape can have multiple 'stripe_heads' that must be active together. If the quiesce come between allocating the first and the last of such a collection, then we deadlock, as the last will not be allocated until the quiesce is lifted, the quiesce will not be lifted until the first (which has been allocated) gets used, and that first cannot be used until the last is allocated. It is not necessary to inhibit reshape IO when a quiesce is requested. Those places in the code that require a full quiesce will ensure the reshape thread is not running at all. So allow reshape requests to get access to new stripe_heads without being blocked by a 'quiesce'. This only affects in-place reshapes (i.e. where the array does not grow or shrink) and these are only newly supported. So this patch is not needed in earlier kernels. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 75469e63ff10..59f2ec0759b4 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -362,7 +362,7 @@ static void raid5_unplug_device(struct request_queue *q); static struct stripe_head * get_active_stripe(raid5_conf_t *conf, sector_t sector, - int previous, int noblock) + int previous, int noblock, int noquiesce) { struct stripe_head *sh; @@ -372,7 +372,7 @@ get_active_stripe(raid5_conf_t *conf, sector_t sector, do { wait_event_lock_irq(conf->wait_for_stripe, - conf->quiesce == 0, + conf->quiesce == 0 || noquiesce, conf->device_lock, /* nothing */); sh = __find_stripe(conf, sector, conf->generation - previous); if (!sh) { @@ -2671,7 +2671,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, sector_t bn = compute_blocknr(sh, i, 1); sector_t s = raid5_compute_sector(conf, bn, 0, &dd_idx, NULL); - sh2 = get_active_stripe(conf, s, 0, 1); + sh2 = get_active_stripe(conf, s, 0, 1, 1); if (sh2 == NULL) /* so far only the early blocks of this stripe * have been requested. When later blocks @@ -2944,7 +2944,7 @@ static bool handle_stripe5(struct stripe_head *sh) /* Finish reconstruct operations initiated by the expansion process */ if (sh->reconstruct_state == reconstruct_state_result) { struct stripe_head *sh2 - = get_active_stripe(conf, sh->sector, 1, 1); + = get_active_stripe(conf, sh->sector, 1, 1, 1); if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) { /* sh cannot be written until sh2 has been read. * so arrange for sh to be delayed a little @@ -3189,7 +3189,7 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { struct stripe_head *sh2 - = get_active_stripe(conf, sh->sector, 1, 1); + = get_active_stripe(conf, sh->sector, 1, 1, 1); if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) { /* sh cannot be written until sh2 has been read. * so arrange for sh to be delayed a little @@ -3675,7 +3675,7 @@ static int make_request(struct request_queue *q, struct bio * bi) (unsigned long long)logical_sector); sh = get_active_stripe(conf, new_sector, previous, - (bi->bi_rw&RWA_MASK)); + (bi->bi_rw&RWA_MASK), 0); if (sh) { if (unlikely(previous)) { /* expansion might have moved on while waiting for a @@ -3873,7 +3873,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) { int j; int skipped = 0; - sh = get_active_stripe(conf, stripe_addr+i, 0, 0); + sh = get_active_stripe(conf, stripe_addr+i, 0, 0, 1); set_bit(STRIPE_EXPANDING, &sh->state); atomic_inc(&conf->reshape_stripes); /* If any of this stripe is beyond the end of the old @@ -3922,7 +3922,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped if (last_sector >= mddev->dev_sectors) last_sector = mddev->dev_sectors - 1; while (first_sector <= last_sector) { - sh = get_active_stripe(conf, first_sector, 1, 0); + sh = get_active_stripe(conf, first_sector, 1, 0, 1); set_bit(STRIPE_EXPAND_SOURCE, &sh->state); set_bit(STRIPE_HANDLE, &sh->state); release_stripe(sh); @@ -4022,9 +4022,9 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski bitmap_cond_end_sync(mddev->bitmap, sector_nr); - sh = get_active_stripe(conf, sector_nr, 0, 1); + sh = get_active_stripe(conf, sector_nr, 0, 1, 0); if (sh == NULL) { - sh = get_active_stripe(conf, sector_nr, 0, 0); + sh = get_active_stripe(conf, sector_nr, 0, 0, 0); /* make sure we don't swamp the stripe cache if someone else * is trying to get access */ @@ -4086,7 +4086,7 @@ static int retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio) /* already done this stripe */ continue; - sh = get_active_stripe(conf, sector, 0, 1); + sh = get_active_stripe(conf, sector, 0, 1, 0); if (!sh) { /* failed to get a stripe - must wait */ From 0e6e0271a210817e202c8a4bfffbde3e3c0616d1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 9 Jun 2009 16:32:22 +1000 Subject: [PATCH 659/670] md/raid5: fix bug in reshape code when chunk_size decreases. Now that we support changing the chunksize, we calculate "reshape_sectors" to be the max of number of sectors in old and new chunk size. However there is one please where we still use 'chunksize' rather than 'reshape_sectors'. This causes a reshape that reduces the size of chunks to freeze. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 59f2ec0759b4..bb37fb1b2d82 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3916,7 +3916,7 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped raid5_compute_sector(conf, stripe_addr*(new_data_disks), 1, &dd_idx, NULL); last_sector = - raid5_compute_sector(conf, ((stripe_addr+conf->chunk_size/512) + raid5_compute_sector(conf, ((stripe_addr+reshape_sectors) *(new_data_disks) - 1), 1, &dd_idx, NULL); if (last_sector >= mddev->dev_sectors) From fdd7b4c3302c93f6833e338903ea77245eb510b4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 Jun 2009 04:01:02 -0700 Subject: [PATCH 660/670] r8169: fix crash when large packets are received Michael Tokarev reported receiving a large packet could crash a machine with RTL8169 NIC. ( original thread at http://lkml.org/lkml/2009/6/8/192 ) Problem is this driver tells that NIC frames up to 16383 bytes can be received but provides skb to rx ring allocated with smaller sizes (1536 bytes in case standard 1500 bytes MTU is used) When a frame larger than what was allocated by driver is received, dma transfert can occurs past the end of buffer and corrupt kernel memory. Fix is to tell to NIC what is the maximum size a frame can be. This bug is very old, (before git introduction, linux-2.6.10), and should be backported to stable versions. Reported-by: Michael Tokarev Signed-off-by: Eric Dumazet Tested-by: Michael Tokarev Signed-off-by: David S. Miller --- drivers/net/r8169.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 8247a945a1d9..3b19e0ce290f 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -66,7 +66,6 @@ static const int multicast_filter_limit = 32; #define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ #define EarlyTxThld 0x3F /* 0x3F means NO early transmit */ -#define RxPacketMaxSize 0x3FE8 /* 16K - 1 - ETH_HLEN - VLAN - CRC... */ #define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */ #define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */ @@ -2357,10 +2356,10 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr) return cmd; } -static void rtl_set_rx_max_size(void __iomem *ioaddr) +static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) { /* Low hurts. Let's disable the filtering. */ - RTL_W16(RxMaxSize, 16383); + RTL_W16(RxMaxSize, rx_buf_sz); } static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) @@ -2407,7 +2406,7 @@ static void rtl_hw_start_8169(struct net_device *dev) RTL_W8(EarlyTxThres, EarlyTxThld); - rtl_set_rx_max_size(ioaddr); + rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz); if ((tp->mac_version == RTL_GIGA_MAC_VER_01) || (tp->mac_version == RTL_GIGA_MAC_VER_02) || @@ -2668,7 +2667,7 @@ static void rtl_hw_start_8168(struct net_device *dev) RTL_W8(EarlyTxThres, EarlyTxThld); - rtl_set_rx_max_size(ioaddr); + rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz); tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1; @@ -2846,7 +2845,7 @@ static void rtl_hw_start_8101(struct net_device *dev) RTL_W8(EarlyTxThres, EarlyTxThld); - rtl_set_rx_max_size(ioaddr); + rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz); tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW; From 52ea3a56a3268bc2a5a7c75e98c81463004e38ef Mon Sep 17 00:00:00 2001 From: Minoru Usui Date: Tue, 9 Jun 2009 04:03:09 -0700 Subject: [PATCH 661/670] cls_cgroup: Fix oops when user send improperly 'tc filter add' request I found a bug in cls_cgroup_change() in cls_cgroup.c. cls_cgroup_change() expected tca[TCA_OPTIONS] was set from user space properly, but tc in iproute2-2.6.29-1 (which I used) didn't set it. In the current source code of tc in git, it set tca[TCA_OPTIONS]. git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git If we always use a newest iproute2 in git when we use cls_cgroup, we don't face this oops probably. But I think, kernel shouldn't panic regardless of use program's behaviour. Signed-off-by: Minoru Usui Signed-off-by: David S. Miller --- net/sched/cls_cgroup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sched/cls_cgroup.c b/net/sched/cls_cgroup.c index cc29b44b1500..e5becb92b3e7 100644 --- a/net/sched/cls_cgroup.c +++ b/net/sched/cls_cgroup.c @@ -167,6 +167,9 @@ static int cls_cgroup_change(struct tcf_proto *tp, unsigned long base, struct tcf_exts e; int err; + if (!tca[TCA_OPTIONS]) + return -EINVAL; + if (head == NULL) { if (!handle) return -EINVAL; From 0281b5dc0350cbf6dd21ed558a33cccce77abc02 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 6 Jun 2009 14:50:36 -0700 Subject: [PATCH 662/670] cpumask: introduce zalloc_cpumask_var So can get cpumask_var with cpumask_clear Signed-off-by: Yinghai Lu Signed-off-by: Rusty Russell --- include/linux/cpumask.h | 15 +++++++++++++++ lib/cpumask.c | 12 ++++++++++++ 2 files changed, 27 insertions(+) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 9f315382610b..c5ac87ca7bc6 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -1022,6 +1022,8 @@ typedef struct cpumask *cpumask_var_t; bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node); bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags); +bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node); +bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags); void alloc_bootmem_cpumask_var(cpumask_var_t *mask); void free_cpumask_var(cpumask_var_t mask); void free_bootmem_cpumask_var(cpumask_var_t mask); @@ -1040,6 +1042,19 @@ static inline bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, return true; } +static inline bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags) +{ + cpumask_clear(*mask); + return true; +} + +static inline bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, + int node) +{ + cpumask_clear(*mask); + return true; +} + static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask) { } diff --git a/lib/cpumask.c b/lib/cpumask.c index 1f71b97de0f9..eb23aaa0c7b8 100644 --- a/lib/cpumask.c +++ b/lib/cpumask.c @@ -119,6 +119,12 @@ bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node) } EXPORT_SYMBOL(alloc_cpumask_var_node); +bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node) +{ + return alloc_cpumask_var_node(mask, flags | __GFP_ZERO, node); +} +EXPORT_SYMBOL(zalloc_cpumask_var_node); + /** * alloc_cpumask_var - allocate a struct cpumask * @mask: pointer to cpumask_var_t where the cpumask is returned @@ -135,6 +141,12 @@ bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags) } EXPORT_SYMBOL(alloc_cpumask_var); +bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags) +{ + return alloc_cpumask_var(mask, flags | __GFP_ZERO); +} +EXPORT_SYMBOL(zalloc_cpumask_var); + /** * alloc_bootmem_cpumask_var - allocate a struct cpumask from the bootmem arena. * @mask: pointer to cpumask_var_t where the cpumask is returned From eaa958402ea40851097d051f52ba1bb7a885efe9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 6 Jun 2009 14:51:36 -0700 Subject: [PATCH 663/670] cpumask: alloc zeroed cpumask for static cpumask_var_ts These are defined as static cpumask_var_t so if MAXSMP is not used, they are cleared already. Avoid surprises when MAXSMP is enabled. Signed-off-by: Yinghai Lu Signed-off-by: Rusty Russell --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 +- arch/x86/kernel/cpu/cpufreq/powernow-k7.c | 2 +- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 2 +- arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c | 2 +- arch/x86/kernel/cpu/mcheck/mce_64.c | 2 +- arch/x86/kernel/tlb_uv.c | 2 +- drivers/acpi/processor_core.c | 2 +- drivers/cpufreq/cpufreq.c | 2 +- kernel/sched_cpupri.c | 2 +- kernel/sched_rt.c | 2 +- kernel/smp.c | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 54b6de2cd947..752e8c6b2c7e 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -550,7 +550,7 @@ static int __init acpi_cpufreq_early_init(void) return -ENOMEM; } for_each_possible_cpu(i) { - if (!alloc_cpumask_var_node( + if (!zalloc_cpumask_var_node( &per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map, GFP_KERNEL, cpu_to_node(i))) { diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index a8363e5be4ef..d47c775eb0ab 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -322,7 +322,7 @@ static int powernow_acpi_init(void) goto err0; } - if (!alloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, + if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map, GFP_KERNEL)) { retval = -ENOMEM; goto err05; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 35dc8fbe92bd..cf52215d9eb1 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -887,7 +887,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) /* notify BIOS that we exist */ acpi_processor_notify_smm(THIS_MODULE); - if (!alloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) { printk(KERN_ERR PFX "unable to alloc powernow_k8_data cpumask\n"); ret_val = -ENOMEM; diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c index c9f1fdc02830..55c831ed71ce 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -471,7 +471,7 @@ static int centrino_target (struct cpufreq_policy *policy, if (unlikely(!alloc_cpumask_var(&saved_mask, GFP_KERNEL))) return -ENOMEM; - if (unlikely(!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))) { + if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) { free_cpumask_var(saved_mask); return -ENOMEM; } diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 6fb0b359d2a5..09dd1d414fc3 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -1163,7 +1163,7 @@ static __init int mce_init_device(void) if (!mce_available(&boot_cpu_data)) return -EIO; - alloc_cpumask_var(&mce_device_initialized, GFP_KERNEL); + zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL); err = mce_init_banks(); if (err) diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index ed0c33761e6d..8c7b03b0cfcb 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -832,7 +832,7 @@ static int __init uv_bau_init(void) return 0; for_each_possible_cpu(cur_cpu) - alloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu), + zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu), GFP_KERNEL, cpu_to_node(cur_cpu)); uv_bau_retry_limit = 1; diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 45ad3288c5ff..23f0fb84f1c1 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -844,7 +844,7 @@ static int acpi_processor_add(struct acpi_device *device) if (!pr) return -ENOMEM; - if (!alloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) { kfree(pr); return -ENOMEM; } diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 47d2ad0ae079..6e2ec0b18948 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -808,7 +808,7 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) ret = -ENOMEM; goto nomem_out; } - if (!alloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) { free_cpumask_var(policy->cpus); kfree(policy); ret = -ENOMEM; diff --git a/kernel/sched_cpupri.c b/kernel/sched_cpupri.c index cdd3c89574cd..344712a5e3ed 100644 --- a/kernel/sched_cpupri.c +++ b/kernel/sched_cpupri.c @@ -165,7 +165,7 @@ int __init_refok cpupri_init(struct cpupri *cp, bool bootmem) vec->count = 0; if (bootmem) alloc_bootmem_cpumask_var(&vec->mask); - else if (!alloc_cpumask_var(&vec->mask, GFP_KERNEL)) + else if (!zalloc_cpumask_var(&vec->mask, GFP_KERNEL)) goto cleanup; } diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index f2c66f8f9712..9bf0d2a73045 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -1591,7 +1591,7 @@ static inline void init_sched_rt_class(void) unsigned int i; for_each_possible_cpu(i) - alloc_cpumask_var_node(&per_cpu(local_cpu_mask, i), + zalloc_cpumask_var_node(&per_cpu(local_cpu_mask, i), GFP_KERNEL, cpu_to_node(i)); } #endif /* CONFIG_SMP */ diff --git a/kernel/smp.c b/kernel/smp.c index 858baac568ee..ad63d8501207 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -52,7 +52,7 @@ hotplug_cfd(struct notifier_block *nfb, unsigned long action, void *hcpu) switch (action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: - if (!alloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL, + if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL, cpu_to_node(cpu))) return NOTIFY_BAD; break; From 8437a617708d014d6f220df201a24960e00d57b1 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sat, 6 Jun 2009 14:52:35 -0700 Subject: [PATCH 664/670] kvm: fix kvm reboot crash when MAXSMP is used one system was found there is crash during reboot then kvm/MAXSMP Sending all processes the KILL signal... done Please stand by while rebooting the system... [ 1721.856538] md: stopping all md devices. [ 1722.852139] kvm: exiting hardware virtualization [ 1722.854601] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1722.872219] IP: [] hardware_disable+0x4c/0xb4 [ 1722.877955] PGD 0 [ 1722.880042] Oops: 0000 [#1] SMP [ 1722.892548] last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:2:0/0:2:0:0/vendor [ 1722.900977] CPU 9 [ 1722.912606] Modules linked in: [ 1722.914226] Pid: 0, comm: swapper Not tainted 2.6.30-rc7-tip-01843-g2305324-dirty #299 ... [ 1722.932589] RIP: 0010:[] [] hardware_disable+0x4c/0xb4 [ 1722.942709] RSP: 0018:ffffc900010b6ed8 EFLAGS: 00010046 [ 1722.956121] RAX: 0000000000000000 RBX: ffffc9000e253140 RCX: 0000000000000009 [ 1722.972202] RDX: 000000000000b020 RSI: ffffc900010c3220 RDI: ffffffffffffd790 [ 1722.977399] RBP: ffffc900010b6f08 R08: 0000000000000000 R09: 0000000000000000 [ 1722.995149] R10: 00000000000004b8 R11: 966912b6c78fddbd R12: 0000000000000009 [ 1723.011551] R13: 000000000000b020 R14: 0000000000000009 R15: 0000000000000000 [ 1723.019898] FS: 0000000000000000(0000) GS:ffffc900010b3000(0000) knlGS:0000000000000000 [ 1723.034389] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 1723.041164] CR2: 0000000000000000 CR3: 0000000001001000 CR4: 00000000000006e0 [ 1723.056192] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1723.072546] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1723.080562] Process swapper (pid: 0, threadinfo ffff88107e464000, task ffff88047e5a2550) [ 1723.096144] Stack: [ 1723.099071] 0000000000000046 ffffc9000e253168 966912b6c78fddbd ffffc9000e253140 [ 1723.115471] ffff880c7d4304d0 ffffc9000e253168 ffffc900010b6f28 ffffffff81011022 [ 1723.132428] ffffc900010b6f48 966912b6c78fddbd ffffc900010b6f48 ffffffff8100b83b [ 1723.141973] Call Trace: [ 1723.142981] <0> [] kvm_arch_hardware_disable+0x26/0x3c [ 1723.158153] [] hardware_disable+0x3f/0x55 [ 1723.172168] [] generic_smp_call_function_interrupt+0x76/0x13c [ 1723.178836] [] smp_call_function_interrupt+0x3a/0x5e [ 1723.194689] [] call_function_interrupt+0x13/0x20 [ 1723.199750] <0> [] ? acpi_idle_enter_c1+0xd3/0xf4 [ 1723.217508] [] ? acpi_idle_enter_c1+0xcd/0xf4 [ 1723.232172] [] ? acpi_idle_enter_bm+0xe7/0x2ce [ 1723.235141] [] ? __atomic_notifier_call_chain+0x0/0xac [ 1723.253381] [] ? menu_select+0x58/0xd2 [ 1723.258179] [] ? cpuidle_idle_call+0xa4/0xf3 [ 1723.272828] [] ? cpu_idle+0xb8/0x101 [ 1723.277085] [] ? start_secondary+0x1bc/0x1d7 [ 1723.293708] Code: b0 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 e0 31 c0 48 8b 04 cd 30 ee 27 82 49 89 cc 49 89 d5 48 8b 04 10 48 8d b8 90 d7 ff ff <48> 8b 87 70 28 00 00 48 8d 98 90 d7 ff ff eb 16 e8 e9 fe ff ff [ 1723.335524] RIP [] hardware_disable+0x4c/0xb4 [ 1723.342076] RSP [ 1723.352021] CR2: 0000000000000000 [ 1723.354348] ---[ end trace e2aec53dae150aa1 ]--- it turns out that we need clear cpus_hardware_enabled in that case. Reported-and-tested-by: Yinghai Lu Signed-off-by: Yinghai Lu Signed-off-by: Rusty Russell --- virt/kvm/kvm_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 4293528200b3..4d0dd390aa50 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -2301,7 +2301,7 @@ int kvm_init(void *opaque, unsigned int vcpu_size, bad_pfn = page_to_pfn(bad_page); - if (!alloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) { + if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) { r = -ENOMEM; goto out_free_0; } From c1d4c41f2fdfe66dea957b76d005affba3e56b26 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 9 Jun 2009 15:17:37 +0200 Subject: [PATCH 665/670] bsg: setting rq->bio to NULL Due to commit 1cd96c242a829d52f7a5ae98f554ca9775429685 ("block: WARN in __blk_put_request() for potential bio leak"), BSG SMP requests get the false warnings: WARNING: at block/blk-core.c:1068 __blk_put_request+0x52/0xc0() This sets rq->bio to NULL to avoid that false warnings. Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- block/bsg.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/block/bsg.c b/block/bsg.c index 206060e795da..dd81be455e00 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -315,6 +315,7 @@ out: blk_put_request(rq); if (next_rq) { blk_rq_unmap_user(next_rq->bio); + next_rq->bio = NULL; blk_put_request(next_rq); } return ERR_PTR(ret); @@ -448,6 +449,7 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr, hdr->dout_resid = rq->data_len; hdr->din_resid = rq->next_rq->data_len; blk_rq_unmap_user(bidi_bio); + rq->next_rq->bio = NULL; blk_put_request(rq->next_rq); } else if (rq_data_dir(rq) == READ) hdr->din_resid = rq->data_len; @@ -466,6 +468,7 @@ static int blk_complete_sgv4_hdr_rq(struct request *rq, struct sg_io_v4 *hdr, blk_rq_unmap_user(bio); if (rq->cmd != rq->__cmd) kfree(rq->cmd); + rq->bio = NULL; blk_put_request(rq); return ret; From 586c7e6a280580fd94b662bf486f9bb31098d14b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 9 Jun 2009 16:26:23 -0700 Subject: [PATCH 666/670] shm: fix unused warnings on nommu The massive nommu update (8feae131) resulted in these warnings: ipc/shm.c: In function `sys_shmdt': ipc/shm.c:974: warning: unused variable `size' ipc/shm.c:972: warning: unused variable `next' Signed-off-by: Mike Frysinger Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- ipc/shm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/ipc/shm.c b/ipc/shm.c index faa46da99ebe..425971600485 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -969,10 +969,13 @@ SYSCALL_DEFINE3(shmat, int, shmid, char __user *, shmaddr, int, shmflg) SYSCALL_DEFINE1(shmdt, char __user *, shmaddr) { struct mm_struct *mm = current->mm; - struct vm_area_struct *vma, *next; + struct vm_area_struct *vma; unsigned long addr = (unsigned long)shmaddr; - loff_t size = 0; int retval = -EINVAL; +#ifdef CONFIG_MMU + loff_t size = 0; + struct vm_area_struct *next; +#endif if (addr & ~PAGE_MASK) return retval; From 463aea1a1c49f1a7d4b50656dfd6c8bb33358b1b Mon Sep 17 00:00:00 2001 From: Ian Kent Date: Tue, 9 Jun 2009 16:26:24 -0700 Subject: [PATCH 667/670] autofs4: remove hashed check in validate_wait() The recent ->lookup() deadlock correction required the directory inode mutex to be dropped while waiting for expire completion. We were concerned about side effects from this change and one has been identified. I saw several error messages. They cause autofs to become quite confused and don't really point to the actual problem. Things like: handle_packet_missing_direct:1376: can't find map entry for (43,1827932) which is usually totally fatal (although in this case it wouldn't be except that I treat is as such because it normally is). do_mount_direct: direct trigger not valid or already mounted /test/nested/g3c/s1/ss1 which is recoverable, however if this problem is at play it can cause autofs to become quite confused as to the dependencies in the mount tree because mount triggers end up mounted multiple times. It's hard to accurately check for this over mounting case and automount shouldn't need to if the kernel module is doing its job. There was one other message, similar in consequence of this last one but I can't locate a log example just now. When checking if a mount has already completed prior to adding a new mount request to the wait queue we check if the dentry is hashed and, if so, if it is a mount point. But, if a mount successfully completed while we slept on the wait queue mutex the dentry must exist for the mount to have completed so the test is not really needed. Mounts can also be done on top of a global root dentry, so for the above case, where a mount request completes and the wait queue entry has already been removed, the hashed test returning false can cause an incorrect callback to the daemon. Also, d_mountpoint() is not sufficient to check if a mount has completed for the multi-mount case when we don't have a real mount at the base of the tree. Signed-off-by: Ian Kent Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/autofs4/waitq.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-) diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c index eeb246845909..2341375386f8 100644 --- a/fs/autofs4/waitq.c +++ b/fs/autofs4/waitq.c @@ -297,20 +297,14 @@ static int validate_request(struct autofs_wait_queue **wait, */ if (notify == NFY_MOUNT) { /* - * If the dentry isn't hashed just go ahead and try the - * mount again with a new wait (not much else we can do). - */ - if (!d_unhashed(dentry)) { - /* - * But if the dentry is hashed, that means that we - * got here through the revalidate path. Thus, we - * need to check if the dentry has been mounted - * while we waited on the wq_mutex. If it has, - * simply return success. - */ - if (d_mountpoint(dentry)) - return 0; - } + * If the dentry was successfully mounted while we slept + * on the wait queue mutex we can return success. If it + * isn't mounted (doesn't have submounts for the case of + * a multi-mount with no mount at it's base) we can + * continue on and create a new request. + */ + if (have_submounts(dentry)) + return 0; } return 1; From a61d90d75d0f9e86432c45b496b4b0fbf0fd03dc Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 9 Jun 2009 16:26:26 -0700 Subject: [PATCH 668/670] jbd: fix race in buffer processing in commit code In commit code, we scan buffers attached to a transaction. During this scan, we sometimes have to drop j_list_lock and then we recheck whether the journal buffer head didn't get freed by journal_try_to_free_buffers(). But checking for buffer_jbd(bh) isn't enough because a new journal head could get attached to our buffer head. So add a check whether the journal head remained the same and whether it's still at the same transaction and list. This is a nasty bug and can cause problems like memory corruption (use after free) or trigger various assertions in JBD code (observed). Signed-off-by: Jan Kara Cc: Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/jbd/commit.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index 06560c520f49..618e21c0b7a3 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -241,7 +241,7 @@ write_out_data: spin_lock(&journal->j_list_lock); } /* Someone already cleaned up the buffer? */ - if (!buffer_jbd(bh) + if (!buffer_jbd(bh) || bh2jh(bh) != jh || jh->b_transaction != commit_transaction || jh->b_jlist != BJ_SyncData) { jbd_unlock_bh_state(bh); @@ -478,7 +478,9 @@ void journal_commit_transaction(journal_t *journal) spin_lock(&journal->j_list_lock); continue; } - if (buffer_jbd(bh) && jh->b_jlist == BJ_Locked) { + if (buffer_jbd(bh) && bh2jh(bh) == jh && + jh->b_transaction == commit_transaction && + jh->b_jlist == BJ_Locked) { __journal_unfile_buffer(jh); jbd_unlock_bh_state(bh); journal_remove_journal_head(bh); From 96050dfb25966612008dcea7d342e91fa01e993c Mon Sep 17 00:00:00 2001 From: Peter Botha Date: Tue, 9 Jun 2009 17:16:32 -0700 Subject: [PATCH 669/670] char: mxser, fix ISA board lookup There's a bug in the mxser kernel module that still appears in the 2.6.29.4 kernel. mxser_get_ISA_conf takes a ioaddress as its first argument, by passing the not of the ioaddr, you're effectively passing 0 which means it won't be able to talk to an ISA card. I have tested this, and removing the ! fixes the problem. Cc: "Peter Botha" Signed-off-by: Jiri Slaby Acked-by: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/mxser.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index a420e8d437dd..13f8871e5b21 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -2711,7 +2711,7 @@ static int __init mxser_module_init(void) continue; brd = &mxser_boards[m]; - retval = mxser_get_ISA_conf(!ioaddr[b], brd); + retval = mxser_get_ISA_conf(ioaddr[b], brd); if (retval <= 0) { brd->info = NULL; continue; From 07a2039b8eb0af4ff464efd3dfd95de5c02648c6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 9 Jun 2009 20:05:27 -0700 Subject: [PATCH 670/670] Linux 2.6.30 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 106515492089..03373bb703ca 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION*