FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-30 05:15:03 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

mtd: m25p80: Add support for Macronix MX25L25635E

Browse Source 
This is a 256Mbit (32MiB) part so minor changes were made to support
4-byte addressing.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Kevin Cernekee 2010-10-30 21:11:03 -07:00 committed by David Woodhouse
parent f0dff9bd00
commit 4b7f7422b0
1 changed files with 28 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
drivers/mtd/devices/m25p80.c
View File

@ -51,6 +51,10 @@
#define OPCODE_WRDI 0x04 /* Write disable */
#define OPCODE_AAI_WP 0xad /* Auto address increment word program */
/* Used for Macronix flashes only. */
#define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */
#define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */
/* Status Register bits. */
#define SR_WIP 1 /* Write in progress */
#define SR_WEL 2 /* Write enable latch */
@ -62,7 +66,7 @@
/* Define max times to check status register before we give up. */
#define MAX_READY_WAIT_JIFFIES (40 * HZ) /* M25P16 specs 40s max chip erase */
#define MAX_CMD_SIZE 4
#define MAX_CMD_SIZE 5
#ifdef CONFIG_M25PXX_USE_FAST_READ
#define OPCODE_READ OPCODE_FAST_READ
@ -151,6 +155,16 @@ static inline int write_disable(struct m25p *flash)
return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
}
/*
* Enable/disable 4-byte addressing mode.
*/
static inline int set_4byte(struct m25p *flash, int enable)
{
u8 code = enable ? OPCODE_EN4B : OPCODE_EX4B;
return spi_write_then_read(flash->spi, &code, 1, NULL, 0);
}
/*
* Service routine to read status register until ready, or timeout occurs.
* Returns non-zero if error.
@ -207,6 +221,7 @@ static void m25p_addr2cmd(struct m25p *flash, unsigned int addr, u8 *cmd)
cmd[1] = addr >> (flash->addr_width * 8 - 8);
cmd[2] = addr >> (flash->addr_width * 8 - 16);
cmd[3] = addr >> (flash->addr_width * 8 - 24);
cmd[4] = addr >> (flash->addr_width * 8 - 32);
}
static int m25p_cmdsz(struct m25p *flash)
@ -607,7 +622,6 @@ struct flash_info {
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = 256, \
.addr_width = 3, \
.flags = (_flags), \
})
@ -653,6 +667,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) },
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
/* Spansion -- single (large) sector size only, at least
* for the chips listed here (without boot sectors).
@ -884,7 +899,17 @@ static int __devinit m25p_probe(struct spi_device *spi)
flash->mtd.dev.parent = &spi->dev;
flash->page_size = info->page_size;
flash->addr_width = info->addr_width;
if (info->addr_width)
flash->addr_width = info->addr_width;
else {
/* enable 4-byte addressing if the device exceeds 16MiB */
if (flash->mtd.size > 0x1000000) {
flash->addr_width = 4;
set_4byte(flash, 1);
} else
flash->addr_width = 3;
}
dev_info(&spi->dev, "%s (%lld Kbytes)\n", id->name,
(long long)flash->mtd.size >> 10);