ALSA: hda - bdl_pos_adj option to each instance

The option bdl_pos_adj should be provided for each card instance instead of
a global one because the value depends rather on each controller-chip.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit is contained in:
Takashi Iwai 2008-06-10 17:53:34 +02:00 committed by Jaroslav Kysela
parent d2e1c97331
commit 555e219ffa

View File

@ -55,10 +55,10 @@ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static char *model[SNDRV_CARDS];
static int position_fix[SNDRV_CARDS];
static int bdl_pos_adj[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 1};
static int probe_mask[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
static int single_cmd;
static int enable_msi;
static int bdl_pos_adj = 1;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
@ -71,6 +71,8 @@ MODULE_PARM_DESC(model, "Use the given board model.");
module_param_array(position_fix, int, NULL, 0444);
MODULE_PARM_DESC(position_fix, "Fix DMA pointer "
"(0 = auto, 1 = none, 2 = POSBUF).");
module_param_array(bdl_pos_adj, int, NULL, 0644);
MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset.");
module_param_array(probe_mask, int, NULL, 0444);
MODULE_PARM_DESC(probe_mask, "Bitmask to probe codecs (default = -1).");
module_param(single_cmd, bool, 0444);
@ -78,8 +80,6 @@ MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs "
"(for debugging only).");
module_param(enable_msi, int, 0444);
MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)");
module_param(bdl_pos_adj, int, 0644);
MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset");
#ifdef CONFIG_SND_HDA_POWER_SAVE
/* power_save option is defined in hda_codec.c */
@ -330,6 +330,7 @@ struct azx_rb {
struct azx {
struct snd_card *card;
struct pci_dev *pci;
int dev_index;
/* chip type specific */
int driver_type;
@ -1026,12 +1027,13 @@ static int setup_bdle(struct snd_pcm_substream *substream,
/*
* set up BDL entries
*/
static int azx_setup_periods(struct snd_pcm_substream *substream,
static int azx_setup_periods(struct azx *chip,
struct snd_pcm_substream *substream,
struct azx_dev *azx_dev)
{
u32 *bdl;
int i, ofs, periods, period_bytes;
int pos_adj = 0;
int pos_adj;
/* reset BDL address */
azx_sd_writel(azx_dev, SD_BDLPL, 0);
@ -1046,15 +1048,16 @@ static int azx_setup_periods(struct snd_pcm_substream *substream,
ofs = 0;
azx_dev->frags = 0;
azx_dev->irq_ignore = 0;
if (bdl_pos_adj > 0) {
pos_adj = bdl_pos_adj[chip->dev_index];
if (pos_adj > 0) {
struct snd_pcm_runtime *runtime = substream->runtime;
pos_adj = (bdl_pos_adj * runtime->rate + 47999) / 48000;
pos_adj = (pos_adj * runtime->rate + 47999) / 48000;
if (!pos_adj)
pos_adj = 1;
pos_adj = frames_to_bytes(runtime, pos_adj);
if (pos_adj >= period_bytes) {
snd_printk(KERN_WARNING "Too big adjustment %d\n",
bdl_pos_adj);
bdl_pos_adj[chip->dev_index]);
pos_adj = 0;
} else {
ofs = setup_bdle(substream, azx_dev,
@ -1063,7 +1066,8 @@ static int azx_setup_periods(struct snd_pcm_substream *substream,
goto error;
azx_dev->irq_ignore = 1;
}
}
} else
pos_adj = 0;
for (i = 0; i < periods; i++) {
if (i == periods - 1 && pos_adj)
ofs = setup_bdle(substream, azx_dev, &bdl, ofs,
@ -1388,7 +1392,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream)
snd_printdd("azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
azx_dev->bufsize, azx_dev->format_val);
if (azx_setup_periods(substream, azx_dev) < 0)
if (azx_setup_periods(chip, substream, azx_dev) < 0)
return -EINVAL;
azx_setup_controller(chip, azx_dev);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@ -2001,6 +2005,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci,
chip->irq = -1;
chip->driver_type = driver_type;
chip->msi = enable_msi;
chip->dev_index = dev;
INIT_WORK(&chip->irq_pending_work, azx_irq_pending_work);
chip->position_fix = check_position_fix(chip, position_fix[dev]);