mirror of
https://github.com/FEX-Emu/linux.git
synced 2024-12-16 14:02:10 +00:00
Maxim 1586 regulator driver
The Maxim 1586 regulator is a voltage regulator with 2 voltage outputs, specially suitable for Marvell PXA chips. One output is in the range of required VCC_CORE by the PXA27x chips, the other in the VCC_USIM required as well by PXA27x chips. The chip is controlled through the I2C bus. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Robert Jarzmik
Liam Girdwood
parent
45e3e1935e
commit
55f4fa4e33
@ -56,6 +56,15 @@ config REGULATOR_BQ24022
|
||||
charging select between 100 mA and 500 mA charging current
|
||||
limit.
|
||||
|
||||
config REGULATOR_MAX1586
|
||||
tristate "Maxim 1586/1587 voltage regulator"
|
||||
depends on I2C
|
||||
default n
|
||||
help
|
||||
This driver controls a Maxim 1586 or 1587 voltage output
|
||||
regulator via I2C bus. The provided regulator is suitable
|
||||
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
|
||||
|
||||
config REGULATOR_TWL4030
|
||||
bool "TI TWL4030/TWL5030/TPS695x0 PMIC"
|
||||
depends on TWL4030_CORE
|
||||
|
||||
@ -8,6 +8,7 @@ obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
|
||||
obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
|
||||
|
||||
obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
|
||||
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
|
||||
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
|
||||
|
||||
249
drivers/regulator/max1586.c
Normal file
249
drivers/regulator/max1586.c
Normal file
@ -0,0 +1,249 @@
|
||||
/*
|
||||
* max1586.c -- Voltage and current regulation for the Maxim 1586
|
||||
*
|
||||
* Copyright (C) 2008 Robert Jarzmik
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/max1586.h>
|
||||
|
||||
#define MAX1586_V3_MAX_VSEL 31
|
||||
#define MAX1586_V6_MAX_VSEL 3
|
||||
|
||||
#define MAX1586_V3_MIN_UV 700000
|
||||
#define MAX1586_V3_MAX_UV 1475000
|
||||
#define MAX1586_V3_STEP_UV 25000
|
||||
|
||||
#define MAX1586_V6_MIN_UV 0
|
||||
#define MAX1586_V6_MAX_UV 3000000
|
||||
|
||||
#define I2C_V3_SELECT (0 << 5)
|
||||
#define I2C_V6_SELECT (1 << 5)
|
||||
|
||||
/*
|
||||
* V3 voltage
|
||||
* On I2C bus, sending a "x" byte to the max1586 means :
|
||||
* set V3 to 0.700V + (x & 0x1f) * 0.025V
|
||||
*/
|
||||
static int max1586_v3_calc_voltage(unsigned selector)
|
||||
{
|
||||
return MAX1586_V3_MIN_UV + (MAX1586_V3_STEP_UV * selector);
|
||||
}
|
||||
|
||||
static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV)
|
||||
{
|
||||
struct i2c_client *client = rdev_get_drvdata(rdev);
|
||||
unsigned selector;
|
||||
u8 v3_prog;
|
||||
|
||||
if (min_uV < MAX1586_V3_MIN_UV || min_uV > MAX1586_V3_MAX_UV)
|
||||
return -EINVAL;
|
||||
if (max_uV < MAX1586_V3_MIN_UV || max_uV > MAX1586_V3_MAX_UV)
|
||||
return -EINVAL;
|
||||
|
||||
selector = (min_uV - MAX1586_V3_MIN_UV) / MAX1586_V3_STEP_UV;
|
||||
if (max1586_v3_calc_voltage(selector) > max_uV)
|
||||
return -EINVAL;
|
||||
|
||||
dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
|
||||
max1586_v3_calc_voltage(selector) / 1000);
|
||||
|
||||
v3_prog = I2C_V3_SELECT | (u8) selector;
|
||||
return i2c_smbus_write_byte(client, v3_prog);
|
||||
}
|
||||
|
||||
static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
|
||||
{
|
||||
if (selector > MAX1586_V3_MAX_VSEL)
|
||||
return -EINVAL;
|
||||
return max1586_v3_calc_voltage(selector);
|
||||
}
|
||||
|
||||
/*
|
||||
* V6 voltage
|
||||
* On I2C bus, sending a "x" byte to the max1586 means :
|
||||
* set V6 to either 0V, 1.8V, 2.5V, 3V depending on (x & 0x3)
|
||||
* As regulator framework doesn't accept voltages to be 0V, we use 1uV.
|
||||
*/
|
||||
static int max1586_v6_calc_voltage(unsigned selector)
|
||||
{
|
||||
static int voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
|
||||
|
||||
return voltages_uv[selector];
|
||||
}
|
||||
|
||||
static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV)
|
||||
{
|
||||
struct i2c_client *client = rdev_get_drvdata(rdev);
|
||||
unsigned selector;
|
||||
u8 v6_prog;
|
||||
|
||||
if (min_uV < MAX1586_V6_MIN_UV || min_uV > MAX1586_V6_MAX_UV)
|
||||
return -EINVAL;
|
||||
if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
|
||||
return -EINVAL;
|
||||
|
||||
if (min_uV >= 3000000)
|
||||
selector = 3;
|
||||
if (min_uV < 3000000)
|
||||
selector = 2;
|
||||
if (min_uV < 2500000)
|
||||
selector = 1;
|
||||
if (min_uV < 1800000)
|
||||
selector = 0;
|
||||
|
||||
if (max1586_v6_calc_voltage(selector) > max_uV)
|
||||
return -EINVAL;
|
||||
|
||||
dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
|
||||
max1586_v6_calc_voltage(selector) / 1000);
|
||||
|
||||
v6_prog = I2C_V6_SELECT | (u8) selector;
|
||||
return i2c_smbus_write_byte(client, v6_prog);
|
||||
}
|
||||
|
||||
static int max1586_v6_list(struct regulator_dev *rdev, unsigned selector)
|
||||
{
|
||||
if (selector > MAX1586_V6_MAX_VSEL)
|
||||
return -EINVAL;
|
||||
return max1586_v6_calc_voltage(selector);
|
||||
}
|
||||
|
||||
/*
|
||||
* The Maxim 1586 controls V3 and V6 voltages, but offers no way of reading back
|
||||
* the set up value.
|
||||
*/
|
||||
static struct regulator_ops max1586_v3_ops = {
|
||||
.set_voltage = max1586_v3_set,
|
||||
.list_voltage = max1586_v3_list,
|
||||
};
|
||||
|
||||
static struct regulator_ops max1586_v6_ops = {
|
||||
.set_voltage = max1586_v6_set,
|
||||
.list_voltage = max1586_v6_list,
|
||||
};
|
||||
|
||||
static struct regulator_desc max1586_reg[] = {
|
||||
{
|
||||
.name = "Output_V3",
|
||||
.id = MAX1586_V3,
|
||||
.ops = &max1586_v3_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = MAX1586_V3_MAX_VSEL + 1,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "Output_V6",
|
||||
.id = MAX1586_V6,
|
||||
.ops = &max1586_v6_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = MAX1586_V6_MAX_VSEL + 1,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int max1586_pmic_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *i2c_id)
|
||||
{
|
||||
struct regulator_dev **rdev;
|
||||
struct max1586_platform_data *pdata = client->dev.platform_data;
|
||||
int i, id, ret = 0;
|
||||
|
||||
rdev = kzalloc(sizeof(struct regulator_dev *) * (MAX1586_V6 + 1),
|
||||
GFP_KERNEL);
|
||||
if (!rdev)
|
||||
return -ENOMEM;
|
||||
|
||||
ret = -EINVAL;
|
||||
for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
|
||||
id = pdata->subdevs[i].id;
|
||||
if (!pdata->subdevs[i].platform_data)
|
||||
continue;
|
||||
if (id < MAX1586_V3 || id > MAX1586_V6) {
|
||||
dev_err(&client->dev, "invalid regulator id %d\n", id);
|
||||
goto err;
|
||||
}
|
||||
rdev[i] = regulator_register(&max1586_reg[id], &client->dev,
|
||||
pdata->subdevs[i].platform_data,
|
||||
client);
|
||||
if (IS_ERR(rdev[i])) {
|
||||
ret = PTR_ERR(rdev[i]);
|
||||
dev_err(&client->dev, "failed to register %s\n",
|
||||
max1586_reg[id].name);
|
||||
goto err;
|
||||
}
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, rdev);
|
||||
dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
|
||||
return 0;
|
||||
|
||||
err:
|
||||
while (--i >= 0)
|
||||
regulator_unregister(rdev[i]);
|
||||
kfree(rdev);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int max1586_pmic_remove(struct i2c_client *client)
|
||||
{
|
||||
struct regulator_dev **rdev = i2c_get_clientdata(client);
|
||||
int i;
|
||||
|
||||
for (i = 0; i <= MAX1586_V6; i++)
|
||||
if (rdev[i])
|
||||
regulator_unregister(rdev[i]);
|
||||
kfree(rdev);
|
||||
i2c_set_clientdata(client, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id max1586_id[] = {
|
||||
{ "max1586", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, max1586_id);
|
||||
|
||||
static struct i2c_driver max1586_pmic_driver = {
|
||||
.probe = max1586_pmic_probe,
|
||||
.remove = max1586_pmic_remove,
|
||||
.driver = {
|
||||
.name = "max1586",
|
||||
},
|
||||
.id_table = max1586_id,
|
||||
};
|
||||
|
||||
static int __init max1586_pmic_init(void)
|
||||
{
|
||||
return i2c_add_driver(&max1586_pmic_driver);
|
||||
}
|
||||
subsys_initcall(max1586_pmic_init);
|
||||
|
||||
static void __exit max1586_pmic_exit(void)
|
||||
{
|
||||
i2c_del_driver(&max1586_pmic_driver);
|
||||
}
|
||||
module_exit(max1586_pmic_exit);
|
||||
|
||||
/* Module information */
|
||||
MODULE_DESCRIPTION("MAXIM 1586 voltage regulator driver");
|
||||
MODULE_AUTHOR("Robert Jarzmik");
|
||||
MODULE_LICENSE("GPL");
|
||||
52
include/linux/regulator/max1586.h
Normal file
52
include/linux/regulator/max1586.h
Normal file
@ -0,0 +1,52 @@
|
||||
/*
|
||||
* max1586.h -- Voltage regulation for the Maxim 1586
|
||||
*
|
||||
* Copyright (C) 2008 Robert Jarzmik
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef REGULATOR_MAX1586
|
||||
#define REGULATOR_MAX1586
|
||||
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
#define MAX1586_V3 0
|
||||
#define MAX1586_V6 1
|
||||
|
||||
/**
|
||||
* max1586_subdev_data - regulator data
|
||||
* @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
|
||||
* @name: regulator cute name (example for V3: "vcc_core")
|
||||
* @platform_data: regulator init data (contraints, supplies, ...)
|
||||
*/
|
||||
struct max1586_subdev_data {
|
||||
int id;
|
||||
char *name;
|
||||
struct regulator_init_data *platform_data;
|
||||
};
|
||||
|
||||
/**
|
||||
* max1586_platform_data - platform data for max1586
|
||||
* @num_subdevs: number of regultors used (may be 1 or 2)
|
||||
* @subdevs: regulator used
|
||||
* At most, there will be a regulator for V3 and one for V6 voltages.
|
||||
*/
|
||||
struct max1586_platform_data {
|
||||
int num_subdevs;
|
||||
struct max1586_subdev_data *subdevs;
|
||||
};
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user