FEX-Emu/linux
1
0
Fork 0
mirror of https://github.com/FEX-Emu/linux.git synced 2024-12-17 06:17:35 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

[SCSI] fcoe: move link speed checking into its own routine

Browse Source 
It doesn't make sense to update the link speed in the is_link_ok()
routine. Move it to it's own routine and acquire the device speed
when we're configuring the device initially as well as if there are
any netdev events received.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This commit is contained in:
Robert Love 2010-05-07 15:18:35 -07:00 committed by James Bottomley
parent d29510a296
commit 5e4f8fe7b5
1 changed files with 29 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
drivers/scsi/fcoe/fcoe.c
View File

@ -74,6 +74,7 @@ static int fcoe_rcv(struct sk_buff *, struct net_device *,
static int fcoe_percpu_receive_thread(void *);
static void fcoe_clean_pending_queue(struct fc_lport *);
static void fcoe_percpu_clean(struct fc_lport *);
static int fcoe_link_speed_update(struct fc_lport *);
static int fcoe_link_ok(struct fc_lport *);
static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *);
@ -631,6 +632,8 @@ static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev)
port->fcoe_pending_queue_active = 0;
setup_timer(&port->timer, fcoe_queue_timer, (unsigned long)lport);
fcoe_link_speed_update(lport);
if (!lport->vport) {
/*
* Use NAA 1&2 (FC-FS Rev. 2.0, Sec. 15) to generate WWNN/WWPN:
@ -1829,6 +1832,9 @@ static int fcoe_device_notification(struct notifier_block *notifier,
FCOE_NETDEV_DBG(netdev, "Unknown event %ld "
"from netdev netlink\n", event);
}
fcoe_link_speed_update(lport);
if (link_possible && !fcoe_link_ok(lport))
fcoe_ctlr_link_up(&fcoe->ctlr);
else if (fcoe_ctlr_link_down(&fcoe->ctlr)) {
@ -2128,26 +2134,19 @@ out_nomod:
}
/**
* fcoe_link_ok() - Check if the link is OK for a local port
* @lport: The local port to check link on
*
* Any permanently-disqualifying conditions have been previously checked.
* This also updates the speed setting, which may change with link for 100/1000.
*
* This function should probably be checking for PAUSE support at some point
* in the future. Currently Per-priority-pause is not determinable using
* ethtool, so we shouldn't be restrictive until that problem is resolved.
*
* Returns: 0 if link is OK for use by FCoE.
* fcoe_link_speed_update() - Update the supported and actual link speeds
* @lport: The local port to update speeds for
*
* Returns: 0 if the ethtool query was successful
* -1 if the ethtool query failed
*/
int fcoe_link_ok(struct fc_lport *lport)
int fcoe_link_speed_update(struct fc_lport *lport)
{
struct fcoe_port *port = lport_priv(lport);
struct net_device *netdev = port->fcoe->netdev;
struct ethtool_cmd ecmd = { ETHTOOL_GSET };
if (netif_oper_up(netdev) && !dev_ethtool_get_settings(netdev, &ecmd)) {
if (!dev_ethtool_get_settings(netdev, &ecmd)) {
lport->link_supported_speeds &=
~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
if (ecmd.supported & (SUPPORTED_1000baseT_Half |
@ -2166,6 +2165,23 @@ int fcoe_link_ok(struct fc_lport *lport)
return -1;
}
/**
* fcoe_link_ok() - Check if the link is OK for a local port
* @lport: The local port to check link on
*
* Returns: 0 if link is UP and OK, -1 if not
*
*/
int fcoe_link_ok(struct fc_lport *lport)
{
struct fcoe_port *port = lport_priv(lport);
struct net_device *netdev = port->fcoe->netdev;
if (netif_oper_up(netdev))
return 0;
return -1;
}
/**
* fcoe_percpu_clean() - Clear all pending skbs for an local port
* @lport: The local port whose skbs are to be cleared